INSTALLATION INSTRUCTIONS FOR PART 95-3305

INSTALLATION INSTRUCTIONS FOR PART 95-3305

95-3305KIT FEATURES

• Double DIN Radio Provision• Stacked ISO Units Provision

A) Double DIN Trim Plate B) Double DIN BracketsKIT COMPONENTS

A

Small Flat Blade Screwdriver • Panel Removal Tool • Phillips Screwdriver • Socket Set • Torx Driver • Allen Wrench

1-800-221-0932 © COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION

www.metraonline.com

TOOLS REQUIRED:

APPLICATIONS

B

CHEVROLET Avalanche 2007-08/Equinox 2007-08

Express Van 2008/Impala 2006-08 Monte Carlo 2006-07/Tahoe 2007-08

Silverado 2007-08 (Excluding Classic Models)

Suburban 2007-08BUICK Enclave 2008, Lucerne 2006-08

GMC Acadia 2007-08Savanna 2008

Sierra 2007-08 (Excluding Classic Models)

Yukon 2007-08

HUMMER H2 2008PONTIAC Torrent 2007-08SATURN Outlook 2007-08/Vue 2008SUZUKI XL7 2007-08

Dash Disassembly- Chevrolet Impala 2006-2008... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1- Chevrolet Monte Carlo 2006-2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1- Buick Lucerne 2006-2008. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1- Chevrolet Avalanche 2007-08. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2- Chevrolet Silverado (Excluding Classic Models) 2007-08 . . . . . . . . . . . . . . . . . . .2- Chevrolet Suburban 2007-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2- Chevrolet Tahoe 2007-08 . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2- GMC Sierra (Excluding Classic Models) 2007-08 . . . . . . . . . . . . . . . . . . . . . . . . .2- GMC Yukon 2007-08. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2- Chevrolet Express Van 2008/GMC Savanna 2008 . . . . . . . . . . . . . . . . . . . . . 3- Suzuki XL-7 2007 -08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4- Chevrolet Equinox 2007-08 /Pontiac Torrent 2007-08 . . . . . . . . . . . . . . . . . . 5- Buick Enclave/ GMC Acadia/ /Saturn Outlook 2008 . . . . . . . . . . . . . . . . . . . 6- Hummer H2 2008 . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7- Saturn Vue 2008 . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Kit Assembly- Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9- Stacked ISO Units Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

TABLE OF CONTENTS

95-3305

*Note: Refer also to the instructions included with the aftermarket radio.

95-3305 DASH DISASSEMBLY

BUICK LUCERNE CHEVY IMPALA / MONTE CARLO 2006-2008

A

B

1

Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.

1

Unclip and remove the trim panelaround radio and a/c control. (Figure A)

2

Remove (6) 9/32” screws to extractradio and a/c control from sub dash.(Figure B)

3

Continue to kit assembly.

2


A

B

C

Unclip and remove radio trim panel.(Figure A)

2

Remove (2) 8mm screws securingswitch panel below climate controls.Unplug and remove switch panel.(Figure B)

3

Remove (2) 8mm screws securing cli-mate controls. Unplug and remove cli-mate controls. (Figure B)

4

Remove (4) 9/32” screws securingradio. Unplug and remove the radio. (Figure C)

5



Disconnect the negative battery termi-nal to prevent an accidental short cir-cuit.

1

SILVERADO (Excluding Classic Models)/SUBURBAN CHEVY AVALANCHE/TAHOE

GMC YUKON/SIERRA (Excluding Classic Models) 2007-08

3


CHEVY EXPRESS VAN 2008/GMC SAVANNA 2008

Remove (2)10mm bolts from below knee bolster under steering column and removepanel.

2

Remove (2)10mm bolts from panel below passenger dash airbag and remove panel.3

Unsnap and remove radio and instrument cluster panel. (May not be necessary tocompletely remove radio and instrument cluster panel to access radio.)

4

Remove (4) 9/32” bolts to remove radio. 5



Disconnect the negative battery terminal to prevent an accidental short circuit.1

4


A

B

C

AUX

BAND

FWD

REV

SEEKSEEK

PASSENGER AIR BAG

AUX

D

12:02103:5

E

SUZUKI XL-7 2007-08

Press in on sides of the shifter boot torelease it from the shifter trim panel.(Figure A)

2

Lift the boot up to access the Allenscrew securing the shifter knob to theshifter lever. Loosen the Allen screwand remove the shifter knob.(Figure B)

3

Remove (1) torx screw from the shiftertrim panel (Figure C), then using apanel removal tool unsnap the shiftertrim panel. Unplug and remove thepanel. (Figure D)

4

Remove (4) 9/32” screws securingthe radio. Unplug and remove theradio.

6

Using a panel removal tool unsnapthe radio trim panel. Unplug andremove the panel. (Figure E)

5




1

5


A

B

C

CHEVROLET EQUINOX 2007-08

PONTIAC TORRENT 2007-08

Unsnap panel below power windowswitch and remove. Note: This allowsyou to unplug the window switch easi-er. (Figure A)

3

Unsnap and remove entire panel sur-rounding radio and shifter. (Figure B)

4

Remove shifter knob.2

Remove (4) 9/32 screws securingradio. Unplug and remove the radio.(Figure C)

5



Disconnect the negative battery termi-nal to prevent an accidental short circuit.

1

6


BUICK ENCLAVE

GMC ACADIASATURN OUTLOOK

BUICK ENCLAVE/GMC ACADIA/SATURN OUTLOOK 2008

Unclip the radio trim panel includingthe climate controls. Unplug the cli-mate controls and remove the panel.(See drawings)

2

Remove (4) 9/32 screws securing theradio. Unplug and remove the radio.

3




1

7


A

HUMMER H2 2008

Unclip the radio trim panel includingthe a/c vents. Unplug any harnessesconnected to the panel and remove thepanel. (Figure A)

2

Remove (4) 9/32” screws securing theclimate controls. Unplug and removethe climate controls.

3


4




1

8


A

B

C

SATURN VUE 2008

Unclip and remove the trim panel ontop of the radio trim panel. (Figure A)

2

Remove (2) Phillips screws exposedunder panel removed in step 2.(Figure B)

3

Unclip and remove the radio trim panelincluding the a/c vents. (Figure B)

4


6

Unclip and remove the trim panelsurrounding the shifter including theclimate controls. (Figure C)

5




1

95-3305 KIT ASSEMBLY

B

C

C

DOUBLE DIN RADIO PROVISION

STACKED ISO UNITS PROVISION

Slide the DDIN radio unit into the trimplate bracket assembly and secure theunit to the kit using the screws sup-plied with the head unit. (Figure C)

2

Continue to final assembly.


Slide the appropriate bracket into thetrim plate aligning the holes in thetrim plate to the clips on the bracket.(Figure B)

1

Slide the stacked ISO DIN units into thetrim plate bracket assembly andsecure the units to the kit using thescrews supplied with the head units.(Figure C)

2

Slide the appropriate bracket into thetrim plate aligning the holes in thetrim plate to the clips on the bracket.(Figure B)

1

NOTE: XL-7 ONLYTrim top corners of radio housing.(Figure A)

B

A

NOTE: XL-7 ONLYTrim top corners of radio housing.(Figure A)

A

9

95-3305 FINAL ASSEMBLY

FINAL ASSEMBLY

(A) Strip wire ends back 1/2"

B) Twist ends together

C) Solder

D) Tape

A

B

C

D

Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ-ually tape off the ends of any unused wires to prevent electrical short circuit.)

Re-connect the negative battery terminal and test the unit for proper operation.

Reassemble radio and dash assemblies in reverse order of disassembly.

1

2

3

10

FINAL WIRING CONNECTIONSMake wiring connections using the EIA color code chart shown below and the instructions included with thehead unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and

individually tape off ends of any unused wires to prevent electrical short circuit.

METRA / EIA WIRING CODE

12V Ignition / Acc . . . . . . . . . . Red

12V Batt / Memory. . . . . . . . . Yellow

Ground. . . . . . . . . . . . . . . . . . Black*

Power Antenna. . . . . . . . . . . . Blue

Amp Turn-On . . . . . . . . . . . . . Blue / White

Amp Ground. . . . . . . . . . . . . . Black / White

Illumination . . . . . . . . . . . . . . Orange

Dimmer . . . . . . . . . . . . . . . . . Orange / White

Right Front (+) . . . . . . . . . . . . Gray

Right Front (-). . . . . . . . . . . . . Gray/ Black

Left Front (+) . . . . . . . . . . . . . White

Left Front (-). . . . . . . . . . . . . . White / Black

Right Rear (+) . . . . . . . . . . . . Violet

Right Rear (-) . . . . . . . . . . . . . Violet / Black

Left Rear (+) . . . . . . . . . . . . . Green

Left Rear (-) . . . . . . . . . . . . . . Green / Black

*NOTE: When a Black wire is not present, ground radio to vehicle chassis.All colors may not be present on all leads due to manufacturer’s specifications.

REV. 02/19/08 © COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION INST95-3305

INSTALLATION INSTRUCTIONS FOR PART 95-3305

Documents

Transcript of INSTALLATION INSTRUCTIONS FOR PART 95-3305