Installation Instructions - Bolt Inline Post to Beam (51737 56637)

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

Installation Instructions,56637 Bolt Inline (P2B-BI-LS)51737 Bolt Inline (P2B-BI-IW)

Installation Instructions, 56637 1

Typical Installation with Timber Bolts (sold separately)

Laredo Sunset shown


Laredo Sunset & Ironwood

Laredo Sunset & Ironwood

3

2 great styles

Same functionality

choose your connection lifestyle

both styles available for most products

Ironwood(517XX series)

Laredo Sunset(566XX series)


1275.00

314

12.35

5663714Installation Instructions, 56637

1.47 MIN1.88 MAX

kit contains 2 assemblies


1.5 MIN2.00 MAX

kit contains 2 assemblies

5173714Installation Instructions, 56637

1275.00

305

12.00


Suggested Tools(others may be required)Installation Instructions, 56637 6


One 2x8 Beam Two 2x8 Beams

One 4x8 Beam(requires dato cut to post)

installation optionsInstallation Instructions, 56637 7


56680(sold separately)

drill out dimple per 56623installation instructions

note: drill hole BEFORE step 1

56623 option(sold separately)

optional accessoriesInstallation Instructions, 56637 8


D

remove pieces

BA

pencil

dim A

beamwidth

multiple cuts1/4"~ apart

C

adjust to cut depth 1/4"

4x8 onlyInstallation Instructions, 56637 9

dim A ledge cut depth

1.75 dim A-ledge=


pencil

beamwidth

optional screw or nail temporary hardware

safe zone for optional temporary hardware

= =

Tool Required3/8" Driver

(HCN) provided

(OWT Timber Screw)provided

step 1Installation Instructions, 56637 10


= =

SECTION A-ASCALE 1 : 6

= =

AA

step 1 supplementInstallation Instructions, 56637 11

2 Beam InstallationLedges MUST be aligned with one another to ensure remaining installation is easier


= =

88.903.50

2 beam installation(see Step 2 Supplement)

use a ruler to ensure both sides are the same

temporarily install plate and mark center of holes, then mark opposite side.

pencil marks1 beam installation

Prevent Unsightly Breakoutsdrill most of the way from one side DO NOT breakout then repeat from opposite side



B

B

holesaligned

SCALE 1 : 6SECTION B-B

note

Prevent Unsightly Breakoutsdrill most of the way from one side DO NOT breakout then repeat from opposite side

step 2 supplementInstallation Instructions, 56637 13

2 Beam Installation shownDrill holes as level as possible to ensure

straight path to align with hole from opposite side


Tool Required3/8" Driver

(HCN) provided

(OWT Timber Screw)provided

select OWT Timber Bolt(sold separately) 56680 Heavy Duty Washer

for extra holding power(sold separately)

same process for all


Installation Instructions - Bolt Inline Post to Beam (51737 56637)

Documents

Transcript of Installation Instructions - Bolt Inline Post to Beam (51737 56637)