Installation Guide - siriusretail.com · 2 SIR-ALP1 Installation Guide ... and real bluegrass to...

Installation Guide

2 SIR-ALP1 Installation Guide

Congratulations on your purchase of the SIR-ALP1– the AlpineCompatible SIRIUS Satellite Radio Tuner!

Your new SIRIUS Tuner is designed to work with 2004 and up Alpine Ai-NETheadunits that are designated “SAT READY.” Contact Alpine or SIRIUS formodel compatibility.

With SIRIUS, the emphasis is on themusic and entertainment you want.The music is hosted by SIRIUSJockeys, who are true experts. Theyback-up the music with compellinginformation about the song beingplayed, and they understand thatsometimes it’s best to just let themusic speak for itself.

Rely on SIRIUS rocket science forsuperior coverage.Only SIRIUS has three powerfulsatellites that fly directly over the U.S.ensuring coast-to-coast coverage withhigh elevation angles. This gives thesatellites a “clear line of sight” to yourcar or home, with much less concernfor buildings, trees or other objectsthat might block conventional satellitesignals.

Once you experience more than 120channels of digital entertainment,you’ll never want to leave your car.For more information, visitwww.sirius.com.

What is SIRIUS Satellite Radio?

Over 120 channels of the bestentertainment and completelycommercial-free music for your car,home or office.Only SIRIUS has more than 65original music channels, from today’shits to R&B oldies to classicalmasterpieces. From authentic countryand real bluegrass to cool jazz, hotlatin, reggae, rock and many more.Best of all, it’s all completelycommercial-free.

SIRIUS also has more than 55channels of world-class sports, newsand entertainment. Included as part ofyour subscription, you get up to 16NFL games a week, up to 40 NBAgames a week and up to 40 NHLgames a week. (Games arebroadcasted during their respectiveseasons.) Coupled with great sportsnews from ESPN, the SIRIUS sportsoffering is unrivaled. And don’t forgeta host of other great news andentertainment, like NPR, CNBC, FoxNews, Radio Disney andE! Entertainment Radio.

3SIR-ALP1 Operation and Installation Guide 3SIR-ALP1 Installation Guide

Table of ContentsPackage Contents .............................................................................................. 3Warnings and Cautions ..................................................................................... 4Installation .......................................................................................................... 6Mounting the Tuner ............................................................................................ 6Installing the Antenna ........................................................................................ 6Optimum Antenna Mounting Locations ........................................................... 7Wiring and Cable Connections ......................................................................... 8System Connection Examples ........................................................................ 10Activating Your SIRIUS Subscription ............................................................. 14Basic Opperation ............................................................................................. 14Headunit MessagesSpecifications ................................................................................................... 15

Package ContentsA

B

C

F

G

SIR-ALP1 TunerMagnetic Micro AntennaAntenna Cable Cover/TailAlcohol SwabPower Harness With In-Line Fuse2.5-Meter Ai-NET Cable6 Mounting Screws

D

E

ABCDEFG


WARNINGThis symbol means importantinstructions. Failure to heed themcan result in serious injury or death.DO NOT OPERATE ANY FUNCTIONTHAT TAKES YOUR ATTENTIONAWAY FROM SAFELY DRIVING YOURVEHICLE.Any function that requires yourprolonged attention should only beperformed after coming to a completestop. Always stop the vehicle in a safelocation before performing thesefunctions.Failure to do so may result in anaccident.

DO NOT OPEN, DISASSEMBLE ORALTER THE UNIT IN ANY WAY. Doingso may result in fire, electric shock orproduct damage.

DO NOT INSERT ANY OBJECTS INTOTHE UNIT. Doing so may result in fire,electric shock or product damage.

USE THE CORRECT AMPERERATING WHEN REPLACING FUSE.Failure to do so may result in fire,electric shock or product damage.

MAKE THE CORRECT CONNECTIONS.Failure to make proper connections mayresult in fire or product damage.

DO NOT SPLICE INTO A ELECTRICALCABLES. Never cut away cableinsulation to supply power to otherequipment. Doing so will exceed thecurrent carrying capacity of the wire andresult in fire or electric shock.

DO NOT INSTALL IN LOCATIONSTHAT MIGHT HINDER VEHICLEOPERATION. Doing so may obstructvision or hamper movement which canresult in a serious accident.

DO NOT INSTALL THE UNIT TO HIGHLEVELS OF HUMIDITY, MOISTUREOR DUST. Doing so can result in electricshock or product failure.

FCC Warning: This equipment maygenerate or use radio frequency energy.Changes or modifications to thisequipment may cause harmfulinterference unless the modificationsare expressly approved in this UserGuide. The user could lose the authorityto operate this equipment if anunauthorized change or modification ismade.

Note: This equipment has been testedand found to comply with Part 15 of theFCC Rules. These rules are designed toprovide reasonable protection againstharmful interference. This equipment maycause harmful interference to radiocommunications if it is not installed andused in accordance with theseinstructions. However, there is noguarantee that interference will not occurin a particular installation. If this equipmentdoes cause harmful interference to radioor television reception, which can bedetermined by turning the equipment offand on, the user is encouraged to try tocorrect the interference by one of moreof the following measures:

• Relocate the receiving antenna.• Consult the dealer or an

experienced technician for help.


CAUTIONThis symbol means importantinstructions. Failure to heed themcan result in injury or materialproperty damage.

HALT USE IMMEDIATELY IF APROBLEM APPEARS. Failure to do somay cause personal injury or damageto the product. Return the unit to yourauthorized retailer or nearest servicecenter for repairing.

INSTALL THE WIRING SO THAT IT ISNOT CRIMPED OR PINCHED BYSCREWS OR SHARP METAL EDGES.Route the cables away from moving partsor sharp pointed edges. This will preventcrimping and damage to the wiring. If thewiring must pass through a metal hole,be sure to use a rubber grommet toprevent the wire’s insulation from beingcut by the metal edge of the hole.

USE THE SPECIFIED ACCESSORYPARTS AND INSTALL THE PRODUCTSECURELY. Be sure to use only thespecified accessory parts. Use of non-specified parts may damage this unitinternally or may not securely install theunit in place. This may cause parts tobecome loose, resulting in hazards orproduct failure.

USE CAUTION IF YOU NEED TODISCONNECT THE BATTERYTERMINAL. Please consult thevehicle’s owner’s manual or a servicetechnician prior to removing the batterypositive or ground connection, as it maycause damage to the vehicle’s electricalsystem or require reprogramming of thevehicle’s computer-controlled devices.


Installing the AntennaThe antenna includes a 6-1/2” cablecover/tail which covers the exposedantenna cable and keeps it attachedsecurely to vehicle roof. The tail alsohelps position the antenna the properdistance from the window, sunroof orrear hatch.To attach the cover/tail:1) Once you have determined the

proper mounting location (see nextsection), clean the area with thesupplied alcohol swab

3) Connect the cover/tail to the antennacable, making sure that the strain-relief on the antenna seats into thecover/tail groove. Route the cablethrough the wire channel in thecover/tail.

InstallationIt is recommended that prior tostarting the installation, youthoroughly read this manual andfollow the guidelines listed below:

Consider the mounting locationcarefully. You should make sure thatyou avoid the following:

• Any location where the tuner isexposed to moisture.

• Any location where the unit isexposed to extreme heat.

• Any location that would interferewith moving parts on the vehicle orhamper driving.

Mounting the SIR-ALP1 TunerBe sure that you find a location that isflat and has clearance above the unitto prevent any damage as well asallow for ventilation.

Do not install the tuner under thecarpet or in a small enclosed areawithout proper ventilation. Doing socan result in damage to the tuner orthe vehicle.

Use the supplied screws to securelyfasten the unit.

Caution:If you are attaching the unit directly tothe vehicle’s chassis, be sure that youcheck to make sure the area behindthe unit is free from moving parts, fuelor break lines, wire harnesses or anyother items which may get damagedby drilling a mounting hole or usingthe supplied screws.

Cable Cover/Tail

Antenna(Bottom)

Adhesive Strips


Sedan/Coupe

SUV/Mini-Van

Truck

Convertible (only)

Cable Cover/TailAntenna

Optimum Antenna MountingLocationsThe optimum location to mount theincluded antenna is on the roof of thevehicle. It is important to avoid anyobstruction that will block satellitesignal – like a roof rack. For convertiblevehicles, install the antenna on thetrunk lid.

• Place the antenna on a metalsurface of your vehicle at least 12"x 12", and at least 6" from awindow. (Use the antenna cover/tailas a guide for the proper distance).

• The antenna’s powerful magnet willsecure it to the metal surface. Theadhesive that is attached to theantenna cover/tail will secure thecable to the vehicle. Before routingthe antenna cable, confirm that theantenna is mounted in a goodlocation.

• Route the cable from the antenna tothe vehicle’s interior by tucking itunderneath the rubber moldingaround the rear window (if possible).

• Route the cable from the lowest pointof the rear window into the trunk.Take advantage of any existing cablechannels or wiring conduits.

• For SUVs, minivans and five-doorvehicles, bring the cable into thevehicle under the rubber moldingfor the tailgate, and continue underthe interior trim.

• From the trunk, carefully route thecable to the location of theSIR-ALP1 and plug the SMBconnector onto the unit.

4) Remove the protective tape from theadhesive, carefully position theantenna with cover/tail and applypressure to secure to the vehicle.

Vehicle

Caution:• Do not pull the wire across sharp

edges that could damage it.• Keep the wire away from areas

where it could become tangled inthe driver’s and passenger’s feet.

• Keep the antenna wire away fromextreme heat – like exhaust systems.

• Avoid placing the cable near anymoving parts.


1

3

2

4

B C D

A

Wiring and Cable ConnectionsAntenna InputConnect the right-angle SMBconnector from the antenna. Pushfirmly to attach.

Ai-NET Output ConnectorUse the supplied Ai-NET cable toconnect to the Alpine Headunit orAudio Processor – See “SystemConnection Examples” for morespecific details.

Ai-NET Input ConnectorConnect to optional Alpine audioequipment like CD Changers - See“System Connection Examples” formore specific details.

Power Harness ConnectorAfter the wiring connections arecomplete, plug the wiring harness intothe connector. Make sure to insertfirmly to lock the connector in place.

Antenna Input (SMB)Ai-NET Output Connector (BLACK)Ai-NET Input Connector (GRAY)Power Connector

BC

D

A

OpenBattery (+)Chassis Ground (–)Open

23

4

1


Antenna (21’ cable) - Mount onRoof of Vehicle

PowerHarness

Black – Connect to Chassis Ground

2.5-meter Ai-NET Cable (Connectto Alpine SAT Ready Headunit orSignal Processor)

Yellow – Connect to Battery Positive

Right-angle SMBConnector

Note: It is important to follow the Input/Output configuration of the Ai-NET system. Thedirectionality is in reference to the Audio Path.Gray Ai-NET connectors are Audio InputBlack Ai-NET Connectors are Audio Output. (Exception is the connector on an AlpineHeadunit – it can be either Input or Output depending on the position of the Ai-NET switch onthe bottom of the unit.


System Connection Examples

Special Note

BOTTOM COVER

Ai-NET

NORM EQ DIV

Ai-NET Switch Set to NORM~ Default Setting.

Special Note

BOTTOM COVER

Ai-NET

NORM EQ DIV


Optional Alpine SAT Ready Headunit (Ai-NET CD Player or Mobile Multimedia Station)


Optional Alpine CD Changer (CHA-S634) or Alpine iPOD interface (KCA-420i)

System 1: Alpine Headunit and SIR-ALP1

System 2: Alpine Headunit, CD Changer and SIR-ALP1


Special Note

BOTTOM COVER

Ai-NET

NORM EQ DIV


Optional Alpine DVD Player (DVA-5210, DVA-5205, DVA-5200)

Optional Alpine DVD Changer (DHA-S680)

Special Note

BOTTOM COVER

Ai-NET

NORM EQ DIV


OUT

IN

OUT



System 3: Alpine Headunit, DVD Player and SIR-ALP1

System 4: Alpine Headunit, DVD Changer and SIR-ALP1


System Connection Examples (Continued)System 5: Alpine Headunit, CD-Changer, Audio Processor and SIR-ALP1

OUT

Special Note

BOTTOM COVER

Ai-NET

NORM EQ DIV

Ai-NET Switch Set to EQ/DIV Setting


Optional Alpine Audio Processor Controller (RUX-C701)


Optional Alpine Audio Processor (PXA-H710, PXA-H700)

IN

IN

Headunit InputChanger Input


System 6: Alpine Headunit, DVD Player, DVD-Changer, CD-Changer, AudioProcessor and SIR-ALP1

OUT

Special Note

BOTTOM COVER

Ai-NET

NORM EQ DIV

Ai-NET Switch Set to EQ/DIV Setting

Optional Alpine DVD Player (DVA-5210, DVA-5205, DVA-5200)


Optional Alpine Audio Processor Controller (RUX-C701)

Optional Alpine DVD Changer (DHA-S680)


Optional Alpine Audio Processor (PXA-H710, PXA-H700)

OUT

IN

IN

IN

OUT

IN

Headunit InputChanger Input


You must activate SIR-ALP1 beforeyou can start to receive the SIRIUSSatellite Radio broadcast.1. Make sure that the SIR-ALP1 is

properly connected and that itsantenna is oriented to receive theSIRIUS satellite signal.

2. Turn on the Alpine headunit.3. Press and release the POWER/

SOURCE button on the head unit toselect SIRIUS as the source. (Eachpress of the POWER/SOURCEbutton will change to a differentaudio source.)

4. The display may read “LOADING”until the SIR-ALP1 channel update iscompleted.

NOTE: Don’t push any buttons orperform any operations untilupdating has been completed.Once updated and the SIRIUSchannels are received, the displaywill change to Channel 184 theSIRIUS Satellite Radio’s PreviewChannel. At this time you should alsobe able to hear the audio from thePreview Channel.

5. Use the UP/DN buttons to select toChannel “255” on the display – thiswill bring up the SIRIUS-ID.

6. The unit will display “SIRIUS” in theCategory Name Field, “RADIO ID” inthe Channel Field and the SIRIUS-ID in the Artist and Song Fields ofthe display – Example “ESN123456789123.” Write down theSirius-ID (SID) in the locationprovided on the next page for futurereference.Note: You may have to press theTITLE button on the Alpine headunitto show the SIRIUS-ID. Be sure that

the Alpine headunit is set to AutoSCROLL the text –if not, you mayonly see 8-characters of the code.(See your Alpine Headunit OwnersManual for more information.)Note: The SIRIUS-ID can also befound on the sticker that is on thebottom of the SIR-ALP1 as well as onthe original packaging.

7. Contact SIRIUS on the Internet:https://activate.siriusradio.comFollow the instructions to activateyour subscription. You can also callSIRIUS toll-free at 1-888-539-SIRIUS(1-888-539-7474) to activate yourservice.Note: You will not be able to tune toany other channels until you activateyour SIRIUS subscription.

8. When the subscription is activated orupdated, the word “UPDATING” willappear on the display. Note someAlpine headunits will have differentmessages- please consult yourheadunit owners manual for moreinformation.

9. Once the “UPDATING” text messagedisappears, you may now tune toany actively subscribed channel.

Activating Your SIRIUS Subscription

Basic OperationThe SIR-ALP1 SIRIUS Satellite RadioTuner is compatible with any Alpineheadunit that is “SAT Ready” – whichincludes some 2003 models and most2004 models. Consult Alpine or SiriusCustomer Support Departments formore information about compatibility.

Please consult your Alpine owner’smanual for proper operationinstructions for using satellite radioproducts.


Headunit MessagesThese messages vary by headunit model- consult your Alpine owners manualfor more information.LOADING - Indicates that the SIR-ALP1 is acquiring audio and/or programinformation.UPDATING or CALL 1-888-CALL SIRIUS TO ACTIVATE - This messageappears when the SIR-ALP1 is receiving a subscription update or during achannel or category update.NO SIGNAL or NO SIGNL or ACQUIRING - Will display when there is weak orno antenna signal present.ANTENNA or ANTENNA ERROR - Will display if the antenna is damaged ordisconnected.

SIRIUS ID: ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

SIRIUS Customer Service: 1-888-539-7474

Please write down your SIRIUS-ID in the space provided below:

SpecificationsOperational FrequenciesSatellite ......................................................................... 2322.293/2330.207 MHzTerrestrial ....................................................................................... 2326.250MHz

Power Requirements .................................................................. 11-16 Volts DCFuse Type ........................................................................................ 1-AMP (ATC)

Chassis Size (without Mounting Tabs) ............... 4-1/8” x 5” x 1-3/8 (W XHXD).................................................................. 105mm x 126mm x 35mm (WxHxD)Chassis Size (with Mounting Tabs) .................... 4-7/8” x 5” x 1-3/8 (W XHXD).................................................................. 127mm x 126mm x 35mm (WxHxD)

Antenna Type ................................................................................ Mini-MagneticAntenna Cable Length ................................................. 21’ (single micro-cable)Connector Type .....................................................................SMB (Right-angle)

Audio Interface ........................................ 2 Ai-NET Connectors (Input/Output)Audio Output ............................................................................... 850mV (Fixed)Included Cable ..................................................... 2.5 Meter Ai-NET (Male/Male)

Note: Design and specifications are subject to change without notice.

© 2004 SIRIUS Satellite Radio Inc.

SIRIUS Satellite Radio1221 Avenue of the Americas

New York, NY 10020(888) 539-7474

www.sirius.com

SIR-ALP1 Manual (November 2004- Rev. 2.5)

Installation Guide - siriusretail.com · 2 SIR-ALP1 Installation Guide ... and real bluegrass to...

Documents

Transcript of Installation Guide - siriusretail.com · 2 SIR-ALP1 Installation Guide ... and real bluegrass to...