Installation guide for air oxi tube

8
INSTALLATION GUIDE FOR AIROXI TUBE

Transcript of Installation guide for air oxi tube

Page 1: Installation guide for air oxi tube

INSTALLATION GUIDE FOR AIROXI TUBE

Page 2: Installation guide for air oxi tube

INTRODUCTION TO AIROXI TUBE

• AirOxi is one of the latest technologies for aquaculture aeration and is designed specially

for commercial aquaculture.

• AirOxi Tube has high efficiency in both salt water and fresh water.

• It is made with a blend of materials that provide durability and smooth air flow.

Page 3: Installation guide for air oxi tube

BENEFITS OF OUR AERATION SOLUTION FOR OUR FARMERS

• Increased Dissolved Oxygen in the Pond.

• Reduced Electricity Cost.

• Uniform Dissolved Oxygen Throughout Day and Night.

• AirOxi do not disturb the Aquatic Life.

• Low maintenance.

• Improved Food Conversion Ration

• Higher Yield.

For more information, Visit: http://www.airoxitube.com/benefits-of-aeration-solutions/

Page 6: Installation guide for air oxi tube

MAINTAINANCE OF AIROXI TUBE

• Use the tube at least 2 to 3 hours everyday. This will ensure that the micro holes are clear.

• Once in 15 days, take the tube out of the water and check for algae or clogging because of other

waste particles.

• If there is clogging or coating seen, then rub with a wire brush and then dip in bleaching powder

solution (1 part of powder with 10 parts of water) for half an hour.

• When not in use between crop seasons, remove from water and clean thoroughly with wire

brush and bleaching powder solution.

• Store in a shaded and covered away from direct sunlight.

For more information, Visit: http://www.airoxitube.com/aeration-tube-maintenance/

Page 7: Installation guide for air oxi tube

CONTACT US.

http://www.airoxitube.com/

https://www.facebook.com/airoxitube

https://twitter.com/airoxitube

+91 - 7285017087