Installation ELSA 39 Instructions En
Transcript of Installation ELSA 39 Instructions En
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 1 of 22 Version: 1.1
Instructions for the initial installation of ElsaWin 3.9
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 2 of 22 Version: 1.1
Table of contents 1. Prerequisites .................................................................................................................... 3 2. ElsaWin Installation.......................................................................................................... 4 3. Setting up the DC/importer number and dealer number ................................................ 11 4. Creating/deleting a new “user” ....................................................................................... 15 5. Code request ................................................................................................................. 21
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 3 of 22 Version: 1.1
1. Prerequisites Note: Make sure that no clients are logged on to the server during the
installation unless you want to execute a standalone installation.
Only a system administrator can perform an installation. Before you start the installation, log on to your system as administrator.
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 4 of 22 Version: 1.1
2. ElsaWin Installation Log on to the server or single PC as an administrator. Insert the ELSA setup CD into the CD drive and perform the following steps: Choose the “Start” button in the Windows start list. In the start menu choose <Execute>. Enter: R:\setup.exe (R:\ is your CD drive) and then finish by pressing “Enter”.
Click “Next”
Click the “OK” button
Choose the installation language.
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 5 of 22 Version: 1.1
Click “Next”
Click “Next”
Complete the fields with the appropriate information
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 6 of 22 Version: 1.1
Check whether the information is correct
Choose the “Yes” button to confirm
Choose the corresponding reference media
Then click the “OK” button
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 7 of 22 Version: 1.1
Click “Next”
Click “Next”
Click “Browse”
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 8 of 22 Version: 1.1
Click “Next”
Click “Next”
Click the “OK” button.
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 9 of 22 Version: 1.1
Click “Close”
If you do not have the final code, click the “Close” button.
If you have a “final code”, enter it and click the “OK” button. You can also do this in the ElsaWin Administration at a later point in time.
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 10 of 22 Version: 1.1
Click the “OK” button.
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 11 of 22 Version: 1.1
3. Setting up the DC/importer number and dealer number
Select the administrator and right-click to call up the menu. Click “Edit user”
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 12 of 22 Version: 1.1
Click the “Companies” button
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 13 of 22 Version: 1.1
Enter the DC/importer number and the dealer number
Use the “Add” button to accept the entries
If you select “Default company” you get an error message that you confirm with “Yes”
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 14 of 22 Version: 1.1
You can now enter additional companies. Note! There can only be one default company.
Select “Company” 000-00000 and delete it
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 15 of 22 Version: 1.1
4. Creating/deleting a new “user”
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 16 of 22 Version: 1.1
Setting up a user:
Complete the “white” fields with the appropriate information. The “Surname” is also entered as the user name, but the user name can be changed. Once you have filled out the form, click “Next”
Choose “Services” – “Set up users” from the menu
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 17 of 22 Version: 1.1
Click “Next”
This is where you specify whether the “user” is an ElsaWin Administrator
Complete the fields with the appropriate information. Once you have filled out the form, click “Next”
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 18 of 22 Version: 1.1
Enter your DC/importer number and dealer number. Once you have filled out the form, click “Next”
If you have several DC/importer numbers and/or dealer numbers, you can use “Apply” to assign them to this user. Note! There can only be one default company.
Check whether the information is correct
Click “Next”
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 19 of 22 Version: 1.1
Click “OK” to confirm
Confirm this by choosing the “Create” button
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 20 of 22 Version: 1.1
Delete user:
Select the user and right-click to call up the menu. Click “Delete user”
Click “OK” to confirm
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 21 of 22 Version: 1.1
5. Code request
Choose “Services” - “Code” – “Code request” from the menu
Intructions fort he initial installation of ElsaWin 3.9
Full_ELSA_39_en.doc
Page 22 of 22 Version: 1.1
Here, you can print out the “code request” or enter a “final code”. Click the “Close” button to keep using ElsaWin. If you enter a final code, you must click “OK” to confirm.