Inside View of Cable - Hansford Sensors · Outside View of Connector Screen White core Black core...
9
HS-AC204 Issue C Tel: +44(0) 845 680 1957 Fax: +44(0) 845 680 1958 Email: [email protected] Web: www.hansfordsensors.com Hansford Sensors Excellence in Vibration Monitoring Connector sealed to IP68 only when connected to the accelerometer. Ø22.1mm Environment Specification of Cable Assembly Maximum operating temperature of 150°C with high levels of resistance to chemical attack. 2 Pin MS Connector inside Protective Rubber Boot. Black core White core Screen Free end Connection Details of Cable Assembly Outside View of Connector Screen White core Black core Note: Screen is connected to Accelerometer case via the locking key when the cable is connected. Locking Key B A 77.5mm Cable length to be specified on order Blue Core 4 2 1 3 Inside View of Cable Technical Data of Cable Technical Data Values at 20°C Unit Conductor resistance Max: 53,1 Ω / km Insulation resistance >1500 MΩ x km Test voltage 3 KV DC Voltage rating 600 V AC Capacitance Core- opposite core: 139 nF / km Core- adjacent core: 145 Core-screen: 240 Impedance Core- opposite core: 48 Ω Core- adjacent core: 44 Core-screen: 20 Radiation tolerance 4 x 10 ^5 Gy Weight 38 g / m Temperature rating -40 / +90 °C Core current rating Max: 6 Amps at 40°C ambient air temp. Materials of Cable: C01-001 PUR cable Pos Description Dimension Overall Diameter Remarks 1. Tin plated copper conductor insulation of HFI 147 22 AWG 0,20 0,76 1,16 19 x 0,16 (0,34mm²) 2. Screen wire of tin plated copper 26 AWG 0,48 19 x 0,10 (0,16mm²) 3. Wrapped aluminium polyester foil screen 3,0 4. Jacket of TPU 90 M, blue pressure-extruded round 1,15 5,3 ± 0,2 White Core Black Core Red Core 2 Way MS Connector Part Description Material C02-112-2 2 Way MS Splash Proof Socket Cable Connector Kit for Ø5.2 cables with metal parts anodised with Alucrom 1200 Moulded Body is Moulded in Nylon 30% Glass Filled. Akulon K224-HG6. Terminals are Brass with Gold Flash Plating. Backshell is Metal and is Nickel Plated. Earth Bar is Spring Steel – Tin Plated C02-114 Over Mould Boot for Ø5.2mm Cable Exit Sarlink 3170
Transcript of Inside View of Cable - Hansford Sensors · Outside View of Connector Screen White core Black core...
HS-AC204 Issue C
Tel: +44(0) 845 680 1957
Fax: +44(0) 845 680 1958
Email: [email protected]
Web: www.hansfordsensors.com
Hansford Sensors
Excellence in Vibration Monitoring
Connector sealed to IP68 only when
connected to the accelerometer.
Ø22.1mm
Environment Specification of Cable Assembly
Maximum operating temperature of 150°C with
high levels of resistance to chemical attack.
2 Pin MS Connector inside
Protective Rubber Boot.
Black core
White core
Screen
Free end
Connection Details of Cable Assembly
Outside View
of Connector
Screen
White core
Black core
Note: Screen is connected to Accelerometer
case via the locking key when the cable is connected.
Locking Key
B A
77.5mm
Cable length to be specified on order
Blue
Core
4
2
1
3
Inside View of Cable
Technical Data of Cable
Technical Data Values at 20°C Unit
Conductor resistance Max: 53,1 Ω / km
Insulation resistance >1500 MΩ x km
Test voltage 3 KV DC
Voltage rating 600 V AC
Capacitance
Core- opposite core: 139
nF / kmCore- adjacent core: 145
Core-screen: 240
Impedance
Core- opposite core: 48
Ω
Core- adjacent core: 44
Core-screen: 20
Radiation tolerance4 x 10 ^5
Gy
Weight 38 g / m
Temperature rating -40 / +90 °C
Core current rating Max: 6 Amps at 40°C ambient air temp.
Materials of Cable: C01-001 PUR cable
Pos
Description
Dimension Overall Diameter Remarks
1.
Tin plated copper conductor insulation of HFI 147
22 AWG
0,20
0,76
1,16
19 x 0,16 (0,34mm²)
2. Screen wire of tin plated copper
26 AWG
0,48 19 x 0,10 (0,16mm²)
3. Wrapped aluminium polyester foil screen 3,0
4. Jacket of TPU 90 M, blue pressure-extruded round 1,15 5,3 ± 0,2
White
Core
Black
Core
Red
Core
2 Way MS Connector
Part
Description
Material
C02-112-2 2 Way MS Splash Proof Socket
Cable Connector Kit for Ø5.2
cables with metal parts
anodised with Alucrom 1200
Moulded Body is Moulded in Nylon 30% Glass Filled.
Akulon K224-HG6.
Terminals are Brass with Gold Flash Plating.
Backshell is Metal and is Nickel Plated.
Earth Bar is Spring Steel – Tin Plated
C02-114 Over Mould Boot for Ø5.2mm
Cable Exit
Sarlink 3170
HS-AC320 Issue A
Tel: +44(0) 845 680 1957
Fax: +44(0) 845 680 1958
Email: [email protected]
Web: www.hansfordsensors.com
Hansford Sensors
Excellence in Vibration Monitoring
Connector sealed to IP66 only when
connected to the accelerometer.
Ø22.1mm
Environment Specification of Cable Assembly
Maximum operating temperature of 150°C with
high levels of resistance to chemical attack.
2 Pin MS Connector inside
Protective Rubber Boot.
Black core
White core
Screen Not Connected
Free end
Connection Details of Cable Assembly
Outside View
of Connector
Screen (No Connection)
White core
Black core
Note: Screen is not connected to Accelerometer
case via the locking key when the cable is connected.
Locking Key
B A
77.5mm
Cable length to be specified on order
Blue
Core
4
2
1
3
Inside View of Cable
Technical Data of Cable
Technical Data Values at 20°C Unit
Conductor resistance Max: 53,1 Ω / km
Insulation resistance >1500 MΩ x km
Test voltage 3 KV DC
Voltage rating 600 V AC
Capacitance
Core- opposite core: 139
nF / kmCore- adjacent core: 145
Core-screen: 240
Impedance
Core- opposite core: 48
Ω
Core- adjacent core: 44
Core-screen: 20
Radiation tolerance4 x 10 ^5
Gy
Weight 38 g / m
Temperature rating -40 / +90 °C
Core current rating Max: 6 Amps at 40°C ambient air temp.
Materials of Cable: C01-001 PUR cable
Pos
Description
Dimension Overall Diameter Remarks
1.
Tin plated copper conductor insulation of HFI 147
22 AWG
0,20
0,76
1,16
19 x 0,16 (0,34mm²)
2. Screen wire of tin plated copper
26 AWG
0,48 19 x 0,10 (0,16mm²)
3. Wrapped aluminium polyester foil screen 3,0
4. Jacket of TPU 90 M, blue pressure-extruded round 1,15 5,3 ± 0,2
White
Core
Black
Core
Red
Core
