Input/Output Design - Physical design of output reports and input forms.
Input Output Method
-
Upload
akash-shukla -
Category
Documents
-
view
220 -
download
0
Transcript of Input Output Method
-
7/30/2019 Input Output Method
1/6
AKNOWLEDGEMENT
I express my deep pleasure in presenting this project on
PROPERTY TRADING MANAGEMENT. I wish to thanks all relative and
persons for their help and co-operation without which the completion of
this project would have not been possible.
I am highly obliged and express my deep gratitude towards
FUZAIL AHAMAD for outstanding ideas , valuable support and
encouragement without which this project could not be successful.
I am grateful to my friends and my family members for their valuable
support during my project work.
-
7/30/2019 Input Output Method
2/6
BIBLIOGRAPY
The following books have been considered. These books have helped
very much.
C++ S. jaiswalLet us c++ yashvant P. kanetkarC++ E. BalaguruswamyNCERT books of 10+2 level
-
7/30/2019 Input Output Method
3/6
INPUT OUTPUT SCREEN
(1) When project will start . It will show the following options at screen
Customer in Customer out Cancellation Land Bungalow Flats Plot View Data
Quite
(2) If we select at first option (Customer in ). The following details will
show
Name Address Phone No. Customer Date in Customer ID
After filling the above details , if we press enter button , the above
details will be saved .
(3) after entering the details , we will come at previous options as
shown in 1 Point.
-
7/30/2019 Input Output Method
4/6
(4) If we enter at second option (Customer out) Details related to
second option will show like.
Name Address Phone No. Customer Date Out Customer ID
After filling above details, if we press enter button , the details will be
saved and we will come back at options as Indicated1Point
(5) The third option is (Cancellation) option . this options will delete
the data . If we click at this option , the following details will again show
Name Address Phone No. Customer In date Customer out date Customer ID
After filling details , if we press Enter button , the above datas will
removed from saved file and these datas will not show again .
(6) If e select at fourth option (Land) the following details will again
shows at screen .
Rate Area Location Type
-
7/30/2019 Input Output Method
5/6
After entering details , we will come original options after pressing
Enter button ;
(7) If we select at fifth option (Banglow), the following details will show
again .
Price Location Banglow no Area Level
If we fill up these details and we press Enter, we will reach at original
menu .
(8) If we enter at sixth option(Flats) , the following details will show .
Rate Flats no. Area Location Level
It is main option and the datas of this option is related to the basic
saved datas . Entering of these datas effect the original basic datas.
The detail of each point will be entered .
(9) If we click at seventh option of main menu (Plot). the following
details will show .
Rate Plot no. Level Area Location
-
7/30/2019 Input Output Method
6/6
(10) It is also main option of all options . Data View will show all old
datas according to requirement . This option shows all the recorded
datas and it is very helpful during taking decision.
Name Address Phone no Customer In Customer out Customer ID
It will open datas in systematic way as given below . The above
sequential data is very helpful to take decision . It is back bone of
organization , because old datas of any organization is must to take
decision . these old data should be correct and accurate . These datas
should be in sequential data helps very much during taking decision .
(12) Quit is last option . We can close programmed form this option .
It is last option . After analyzing datas, we can close software from this
option.