OPTIONS

INNOVATION QUALITY CONFIDENCE

Wrislets

Reinforcements

Flashlight holders Gloves straps

PantCoat

Riveted clip with Hook & Loop fastener

Clip with Hook & Loop fastener (SL-90)

Tab with Hook & Loop fastener

Clip and loop for gloves

Fixed glove strap

Nomex® wristlet (natural or black) Kevlar® wristlet (natural)

Shaped

Cuff Shoulder Elbow Cuff Knee Removable knee

Trapezoidal inseam guard (Outer Shell or Polymer Coated Aramid only)

• Available in Polymer Coated Aramid, Outer Shell or Leather • Shoulder and elbow reinforcements available with thermal barrier or Nomex® felt padding• Knee reinforcements available with Nomex® felt or FR closed cell foam padding

ShapedWith thumb loop With thumb loopWith thumb hole With thumb hole

Pockets and flaps

Radio pockets and flaps Mic loop

Semi bellow pockets(10” x 10” or 8” x 10”)Available with reinforcements

Exterior medical patch pocket (4’’ x 4’’) (Shell & neoprene)

VizGrip™ pocket flap

Radio pocket (Standard 8” x 4” x 2” or custom size)

Full bellow pockets(10” x 10” x 2” or 8” x 10” X 2”)Available with reinforcements

Interior medical pocket (4.5’’ x 5’’) (neoprene)

Pocket flap with reflective Grabber™

Extended flap with Hook & Loop fastener

Short full bellow pockets(6” x 10” X 2”)Available with reinforcements

Hand warmer pocket with Nomex® polar fleece lining

Divider pocket for full bellow pockets only

Flap with angle on right or left

Fixed mask pocket(10’’ x 10’’ x 2.5’’ with Kevlar® twill reinforcement

Napoleon pocket (5.5’’ opening on left side) (under storm flap) – with or w/o moisture barrier lining

6-Tool - 2 rows of 3” wide tool compartments,10” x 10” x 2” w/ Kevlar® reinforcement (aka Seattle)

Flap with holes on right and/or left

Mic loop

Combo wedge (3’’ x 8’’ x 2’’) and gloves (6.5’’ x 10” x 2’’) pocket with Kevlar® twill reinforcement

Life line rope pocket(inside hem of coat)

Self rescue pocket - with Kevlar® and Polymer Coated Aramid (9” x 9” x 2½”) (kit not included)

Suspenders

Waist adjustment

Shoulder and arm thermal enhancement

Increased thermal protection

Belt Systems

• H or X styles with neoprene padding• Available with plain yellow or orange retroreflective trim• *H style available with 6 or 8 leather tabs with buttons

• Additional layer of thermal barrier with evenly spaced thermal-enhancement strips of folded thermal barrier and aramid felt• Sewn to upper back, shoulders and arms between the thermal and moisture barriers• Increases TPP and CCHR with additional thermal barrier layer and by trapping insulating air with strips of folded thermal barrier and aramid felt

Two adjustment straps (black Nomex® webbing) with thermoplastic buckles

Two adjustment straps (outer shell) with “alligator” clips

• Available for knees, shoulders and elbows• Between the outer shell and the exterior reinforcement• Multiple layers and materials available• Shown in 14oz/yd2 Nomex® felt

H Style X Style With trim Kevlar® belt with belt loops

Kevlar® belt with tunnel and belt loops

FRONT BACK

Internal harness system External harness attachment

• Three(3) loops on front of waist holding the harness closure• One (1) loop on center back• Pass through openings for leg straps

• 3M™ Scotchlite™ Reflective Material• 2” or 3” letters or numbers• Fluorescent lime/yellow or orange)• Also available in Reflexite®

3M™ Scotchlite™ Reflective Material• Solid 2” or 3” fluorescent lime/yellow or orange• Triple trim 3” only fluorescent lime/yellow or orange; with silver center stripe

Reflexite® Brilliance Series• FTP 1575-S Fire Trim (3” only) diamond plate fluorescent lime with center stripe• FTP 1550-D (2”) or FTP 1575-D 3”diamond plate fluorescent lime

• Sewn-on or removable• Several standard sizes available• 4” x 17”extension patch available

Gemtor™ 544 FR

Seven (7) outer shell loops with snaps on the exterior of the outer shell

Recommended for the Gemtor™ 541 or the R.I.T. Class II (sold separately)

Retroreflective letters

Retroreflective trim

Outer shell letter patch

Patterns

Increased mobility

EMK™ (Enhanced Mobility Knee™)

Retractable action back

CLASSIC DESIGN™

Reach Flex™ system design

X-DESIGN™

FMA™ (Forward Motion Arm™ system)

• Uses darts to pre-flex the knee• Reduces fatigue• Increases range of motion

• Provides additional reach• Retracts when not in use• Standard on X-DESIGN™

• Combines a preformed sleeve & large under arm gusset• Increases range of motion• Minimizes arm restriction & coat rise

• Semi-set in sleeve with preformed elbow• Increases range of motion• Minimizes arm restriction & coat rise

Copyright 2015 INNOTEX INC. All rights reserved. Because of our ongoing commitment to product quality and development we reserve the right to change, cancel, discontinue or alter any specification, design or feature without prior notice and without incurring obligation.

Disclaimer : The portrayed situations are fictional and no attempt should be made to reproduce them.

® Registered Trademark of INNOTEX INC. or their respective holders.™ Trademark of INNOTEX INC. or their respective holders.Printed in Canada / Rev. 10-15

INNOTEX®

275 Gouin, Richmond, QuebecCanada J0B 2H0

INNOTEX®

2397 Harts Ferry Rd., Ohatchee, AlabamaUSA 36271

Customer service1 888 821 3121 (U.S. and Canada only)Tel.: 819 826-5971Fax: 819 826-5195

E-mail: info@innotexprotection.comwww.innotexprotection.com