Innovation and Imagination in Pressure Vessels and Piping ...

Fin

al

Pro

gra

mPVP 2014

2014 Pressure Vessels & Piping Conference

Innovation and Imagination inPressure Vessels and Piping

July 20–24, 2014

Hyatt Regency Orange County

Anaheim, California, USA

2

Welcome to PVP 2014Welcome to Anaheim, California for the 2014 ASME Pressure Vessels & Piping Conference. The PVP Conference is known to be the outstanding international technicalforum for participants to further their knowledge-base through exposure to diverse engineering topics and dissemination of cutting-edge technology related to pressurevessel and piping technologies for the power and process industries. We look forward to fruitful technical exchanges between participants from Europe, Africa, theMiddle East, Asia, the Americas and the Oceania islands. Our Conference continues to shape the technology in the pressure vessel industry on a truly global basis.The ASME Pressure Vessels & Piping Division is sponsoring this Conference. The ASME Nondestructive Evaluation (NDE) Engineering Division is also participating.This year, the Conference Technical Program contains approximately 750 technical papers and presentations organized into approximately 190 technical and paneldiscussion sessions, three technical tutorials, two special tutorials, two workshops, and our outstanding Rudy Scavuzzo Student Paper Symposium and 22nd AnnualStudent Paper Competition. The NDE and Software Demonstration forums are also organized as part of our technical program.Technical papers presented in this Conference are separated into tracks, according to their technical areas, and are available at the Conference in the form of a CD-ROM.A key component of every PVP Conference is the opportunity to socialize and make new friends—this year’s Conference offers several great possibilities. Enjoy theMission San Juan Capistrano Tour on Monday—this tour will allow you to tour a historic landmark and museum known as the “Jewel of the Missions”. Monday eveningwe all meet at the Conference-Wide Reception which will be held in the Hyatt’s Grand Ballroom. The Queen Mary Tour on Tuesday features a fabulous tour of theworld famous historic Queen Mary ocean liner. Additional details regarding these tours can be found later in this program.

PVP 2014 Program Layout

SundayJuly 20, 2014

MondayJuly 21, 2014

TuesdayJuly 22, 2014

WednesdayJuly 23, 2014

ThursdayJuly 24, 2014

7:30 am8:15 am

ArrivalRegistration Opens

(8:00 am – 6:00 pm)

Authors’Breakfast/BriefingRegistration Open

(7:30 am – 4:00 pm)


(7:30 am – 4:00 pm)

Authors’Breakfast/BriefingRegistration Open(7:30 am – noon)


(7:30 am – 3:00 pm)

8:30 am10:15 am

Technical Workshop(9:00 am – 11:30 am)

Block 1.1Technical Sessions

NDE Demo

Block 2.1TPR & Session

Developer TrainingTechnical Sessions

Software Demo



10:30 am12:15 pm Open

Block 1.2Plenary Session

NDE Demo


Software Demo



12:15 pm1:45 pm Open Lunch

Technical Committee Meetings Lunch

Technical Committee Meetings

Honors & AwardsLuncheon

(12:30 pm – 2:15 pm) Lunch

2:00 pm3:45 pm

Special Tutorial(1:00 pm – 3:30 pm)

Block 1.3Technical SessionsTechnical Tutorial

NDE Demo

Block 2.3Technical SessionsTechnical TutorialSoftware Demo

Block 3.3Open


4:00 pm5:45 pm

Special Tutorial(4:00 pm – 6:00 pm)

Block 1.4Technical SessionsTechnical Tutorial

NDE Demo

Block 2.4Technical SessionTechnical TutorialSoftware Demo

Block 3.4Open


Conference Evaluation

Evening Open Conference-Wide

Reception(6:15 pm – 8:00 pm)

Open Conference Social Event:

An Evening at Disney(4:00 pm – 11:00 pm)

Open

Index to ProgramAuthors Breakfast/Briefing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 PVP Conference Organizer Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Call for Papers (PVP-2015) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 59 Publications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Committee Meetings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Registration Hours, Fees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Cooperating Societies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Session Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16–48Disabled Registrants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Session Titles by Session Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13–15Guest/Family Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Social Programs & Tours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7Honors and Awards Luncheon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Society & Division Officers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Hotel Floor Plans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Software Forum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Index of Authors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51–57 Sponsors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . back coverIndex of Session Chairs & Co-Chairs . . . . . . . . . . . . . . . . . . . . . . . . . . . .49–50 Student Paper Symposium & Competition . . . . . . . . . . . . . . . . . . . . . . . . . . . 7NDE Forum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Tax Deductibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Opening Ceremony & Plenary Session (PVP) . . . . . . . . . . . . . . . . . . . . . . .4–5 Workshops and Tutorials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–6Professional Development Hours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

PVP 2014 Conference Committees

Daniel T. Peters Marina B. Ruggles-WrennConference Chair Technical Program Chair

Sam Y. ZamrikConference Advisor

PVP Technical Program RepresentativesCodes & Standards Steven X. XuComputer Technology & Bolted Joints Xinjian DuanDesign & Analysis Shawn MorrisonFluid-Structure Interaction Kazuaki InabaHigh-Pressure Technology Karl SimpsonMaterials & Fabrication Michiel BrongersOperations, Applications & Components Zenghu HanSeismic Engineering Chong-Shien TsaiStudent Paper Competition Young KwonASME NDE Division William T. SpringerNDE Demonstration Forum Carl E. JaskeSoftware Demonstration Forum James F. Cory, Jr.

Student Paper Competition Session DevelopersCodes & Standards Kamran NikbinComputer Technology & Bolted Joints Yasumasa ShojiDesign & Analysis San IyerFluid-Structure Interaction Victor Janzen, Christina GiannopapaHigh-Pressure Technology Mahesh AggarwalMaterials & Fabrication Noel O’Dowd, Sean Leen, Haiyang Qian, Carl JaskeOperations, Applications & Components Yasumasa Shoji, Steve HenselSeismic Engineering Tomoyo Taniguchi, Tasmin HassanASME NDE Division William T. SpringerPVP Senate Young Kwon

PVP Division Executive Committee (2013–2014)Michael E. Nitzel ChairDaniel T. Peters Vice ChairMarina B. Ruggles-Wrenn Communications ChairDouglas A. Scarth Honors and Awards ChairMaher Y. A. Younan Professional Development ChairPierre Mertiny Programs Chair

PVP Senate of Past Division ChairsRonald S. Hafner, Historian (2012–14) 2011–12Young W. Kwon, President (2012–14) 2010–11Luc H. Geraets 2009–10

3

The American Society of Mechanical EngineersPressure Vessels & Piping Division

Artin A. Dermenjian 2008–09James F. Cory, Jr., 2007–08Judith A. Todd 2006–07M. K. Au-Yang 2005–06Ismail T. Kisisel 2004–05William J. Bees 2003–04Howard H. Chung 2002–03Joseph Sinnappan 2001–02A. G. (Jack) Ware 2000–01Robert F. Sammataro* 1999–00Thou-Han Liu 1998–99William E. Short, II 1997–98Richard C. Gwaltney 1996–97Shoei-Sheng Chen * 1995–96Greg L. Hollinger 1994–95Carl E. Jaske 1993–94Rudy J. Scavuzzo 1992–93Sam Y. Zamrik 1991–92G. E. Otto Widera 1990–91Robert H. Mallett 1989–90Robert W. Swindeman 1988–89Alexander H. C. Marr 1987–88Jeffrey T. Fong 1986–87Don B. Van Fossen 1985–86James R. Farr* 1984–85Charles F. Nash 1983–84Donald S. Griffin 1982–83Richard H. Gallagher* 1981–82L. Eugene Hulbert 1980–81Robert E. Nickell 1979–80Roger F. Reedy 1978–79David H. C. Pai 1977–78Pedro V. Marcal 1976–77Harold H. Waite* 1975–76Robert L. Cloud 1974–75Charles V. Moore 1973–74Irvin Berman* 1972–73Danos Kallas* 1971–72Robert J. Cepluch* 1970–71Charles F. Larson 1969–70Gunther P. Eschenbrenner 1968–69Vito Salerno* 1967–68Dana Young* 1966–67

*Deceased

PVP Division Technical Committee ChairsCodes & Standards Kunio HasegawaComputer Technology & Bolted Joints Wolf ReinhardtDesign & Analysis Trevor SeippFluid-Structure Interaction Christina GiannopapaHigh-Pressure Technology Ricky DixonMaterials & Fabrication David RudlandOperations, Applications & Components Stephen HenselSeismic Engineering Tomoyo Taniguchi

PVP Division Administrative Committee ChairsMembership Chair Darren StangWebsite & PVPD Newsletter Editor Marina Ruggles-WrennInternational Coordination Michiel Brongers

ASME Journal of Pressure Vessel TechnologyEditor Young W. Kwon

ASME PresidentJ. Robert Sims, Jr. 2014–2015

4

ASME StaffExecutive Director Thomas G. LoughlinProgram Manager Jamie Hart

OPENING CEREMONY and PLENARY SESSIONInnovation and Imagination in Pressure Vessels and Piping

The Conference opens on Monday, July 21, at 10:30 am, in the Grand Ballroom.Representatives of the American Society of Mechanical Engineers will welcomethe attendees. The first presentation will be delivered by Mr. John Bednar, BP’sTechnology Manager for Floating Structures, SURF, and Subsea Control Systems.The second presentation will be delivered by Mr. Brian Skeels, Emerging Tech-nologies Director, FMC Technologies, Inc.

Plenary Speaker

Mr. John BednarBP

Emerging High Pressure High Temperature Applications for Pres-sure Vessels and Piping in the Oil and Gas Industry

With advances in seismic, drilling, and production technologies, the oil and gasindustry continues to pursue hydrocarbon assets in increasingly challenging en-vironments. Current reservoir potential in the deepwater Paleogene areas of theGulf of Mexico, and in other global basins, poses significant challenges in termsof both high temperature and high pressure (HPHT). To-date, industry standardsfor the design, validation, and use of the necessary HPHT equipment have beeneither limited or non-existent. Users and regulators have had to assess the tech-nical aspects and risk for each potential application on a singular basis.With encouragement from the regulatory agencies, API and other industry groupshave initiated work to generate standards for HPHT. A protocol document (APITechnical Report 1PER15K) was published in March, 2013. Throughout 2013,API Subcommittee 17, Subsea Production Equipment, has worked to evolve theprotocol into API 17 Technical Report 8 (API17TR8) which provides specific designguidance for subsea production systems for HPHT applications. Other subcom-mittees are doing the same for their respective equipment.This first part of a two-part plenary session presentation will provide an overviewof the business, technical, and regulatory needs for a design standard for HPHTequipment for use in the oil and gas industry. The second part will focus on howthe ASME Pressure Vessel and Piping Standards provide the foundation for thenew HPHT equipment standards that have been, or are being, generated.Mr. John Bednar is Chairman of API Subcommittee 17, “Subsea ProductionEquipment”, a position he has held for over ten years.John’s career in the oil & gas industry has spanned nearly 40 years. After gradu-ating from Purdue University in 1975 with a BSME and MSME, John joined ExxonProduction Research Co. in Houston with the task of evaluating and mitigatingbending loads on subsea Blowout Preventers (BOP) in deepwater. He subse-quently became responsible for development of a Downhole BOP, from initial con-cept to field-proven system. In 1982, John became Project Manager for Exxon’sZinc Subsea Project, while also serving in multiple roles associated with deepwatersubsea project planning and implementation.John joined BP in 1994 and has served in a variety of roles (subsea, topsides,drilling, & production-related) supporting BP’s deepwater projects in the Gulf ofMexico (GoM).From 1997 to 2000, John served as Engineering Manager for BP Operated Fieldsin GoM, after which he assumed the role as Subsea & Facilities Project Manager

for BP’s Deepwater Production Business Unit. In this comprehensive position,John was responsible for all subsea & topside facility project work for all BP in-stallations in GoM, including Nile, King, King’s Peak, Pompano, & Marlin. Johnhas been the Project Manager for BP’s Troika Project, and Subsea Manager forThunder Horse, a position he held until September 2010. As Thunder Horse Sub-sea Manager, John was responsible for the design fabrication, and installation ofmany evolving technologies required for this world-class subsea development. For three years, John served as Technology Manager for BP’s Global ProjectsOrganization (GPO), a position in which he defined & ensured alignment betweenthe strategic technical needs of GPO & programs to deliver solutions. He is cur-rently BP’s Technology Manager for Floating Structures, SURF, and Subsea Con-trol Systems.

Plenary Speaker

Brian SkeelsFMC Technologies, Inc.

High Pressure High Temperature (HPHT) Design Guidelines forSubsea Equipment

This presentation describes new API guidelines which are being proposed to es-tablish design methodology, material functional requirements, design validationrequirements for HPHT equipment, and address special requirements associatedwith seals and fasteners. The discussion is intended to provide general guidanceon what requirements and codes come into play as the pressure rating increasesfrom 15,000 psi working pressure through 25,000 psi and traditional thin-walledpressure vessel design methodology gives way to thick-walled pressure vesseldesign methodology. Associated with this transition are requirements for gatheringmaterial design criteria for given elevated operating temperatures (above 350°F),and design validation requirements to meet static and cyclic load (fatigue condi-tions.The new design methodology and guideline is intended to provide the wordingand reference information which can be incorporated into any of the subsea hard-ware specifications and recommended practices within the suite of Sub-Committee17 documents. It is intended to be a guide for the various task groups to use orreference selected portions or the entire document as it pertains to the relevanceof the particular hardware group for pressure ratings and temperature classes as-sociated with HPHT conditions.The presentation outlines the proposed technical recommendations in each ofthese four areas to allow manufacturers to standardize design practices and test-ing protocols as they develop HPHT product offerings for the future; knowing andplanning for what technical and commercial requirements they need to meet. Forend-users, it will provide a minimum industry standard from which to evaluate theefficacy of HPHT product offerings for the safe and effective use of this equipmentexposed to HPHT.Establishing this set of standards will be crucial for industry safety and meetingregulatory scrutiny as the search for oil and gas worldwide exceed 20,000 footreservoir depth.Mr. Brian Skeels is the Emerging Technologies Director at FMC Technologies,Inc. He has 35 years of experience in subsea completion and pipeline design andinstallation. As FMC’s Emerging Technology Director, he serves as a technicalsubsea advisor and strategic planning specialist for frontier technologies and newbusiness opportunities. His efforts delve into HPHT, riserless light well intervention,ROV and remote robotics technology, and subsea spill containment programs forFMC Technologies, Schilling Robotics and FMC Technologies Offshore.

5

Brian has been actively involved in API’s Upstream Standards for 30 years andcurrently serves on the API Subcommittee 17 Executive Committee. He servesas task group chairman for 17G on subsea intervention systems, co-chair for 17Don subsea tree and wellhead equipment, and chairs 17TR8 for HPHT equipmentdesign. Brian is also on several Industry and Professional Society ConferenceProgram Boards. Mr. Skeels holds a B.S. in Mechanical Engineering from Cornell University in 1976,and an M.S. in Ocean Engineering from the University of Rhode Island in 1979.He is a registered Professional Engineer in the State of Texas. He is an AdjunctProfessor in Subsea Engineering at the University of Houston.Mr. Skeels has previously received the ASME Titanium Crawfish Award for tech-nology excellence in the oil industry, SPE Gulf Coast Regional Projects, Facilitiesand Construction Award, and has been promoted to ASME Fellow.

HONORS and AWARDS LUNCHEONThe ASME PVP Division Honors and Awards Luncheon, during which all Divisionand selected ASME Society awards are presented, will be held on Wednesday,July 23, at 12:30 pm, in the Grand Ballroom. The top PVP Division award, theASME S. Y. Zamrik PVP Medal, will be presented to Dr. A. G. (Jack) Ware.

ASME S. Y. Zamrik PVP Medal Recipient

Arthur G. (Jack) WareConsultant

Idaho Falls, ID, USA

This year’s recipient of the ASME S. Y. Zamrik Pressure Vessels & Piping Medalis Dr. Arthur G. (Jack) Ware. Dr. Ware received a BS degree from Virginia Poly-technic Institute, and MS and PhD degrees from Stanford University in Engineer-ing Mechanics. His career began at the Bettis Atomic Power Laboratory and NavalReactors Facility specializing in the design, analysis, and operation of naval nu-clear plants. The majority of his career was spent at the Idaho National Laboratorywhere he performed structural and safety analysis of Department of Energy testreactors. There he also conducted research for the Nuclear Regulatory Commis-sion contributing to the development of ASME Boiler and Pressure Vessel CodeCase N-411 (nuclear piping damping), resolution of Generic Issue 113 (large borehydraulic snubbers), and a license renewal procedure for fatigue analysis of re-actor components under environmental conditions. Dr. Ware has also made im-portant contributions to the ASME Boiler and Pressure Vessel Code in a consultantrole for seismic analysis of nuclear piping.Dr. Ware served as Secretary and then Chair of the Seismic Engineering TechnicalCommittee of the PVPD, PVP Conference Technical Program Chair, and PVPConference Chair. He was a member of the PVPD Executive Committee wherehe served as Professional Development Chair, as well as Executive CommitteeVice-Chair and Chair. He was also a member of the PVPD Honors & Awards Com-mittee. Dr. Ware is currently a member of the PVPD Senate, and has served asSenate Historian and Senate President. He has served on the ASME NationalNominating Committee in the roles of member and Committee Chair. He is a Life

Fellow of ASME, and has received a significant number of other awards for hiscontributions to ASME, including the ASME Dedicated Service Award in 2009.Dr. Ware has published 80 technical papers and nine book chapters, conductedseminars in the United States, Korea, and Brazil, and was Distinguished VisitingProfessor in the Mechanical Engineering Department of the American Universityin Cairo. He has also spent countless hours interacting with PVPD members whileproviding them with guidance in how the Division functions and mentoring themas they become interested in assuming more active roles in the Division.

WORKSHOPS and TUTORIALSTutorials and Workshops offer both the experienced and early career engineersexcellent opportunities to refresh their knowledge and to venture into specific tech-nical areas outside their expertise. Admission to the tutorials and workshops isfree for Conference Registrants.Special Tutorial: This is a two-hour conference session, usually held on Sunday af-ternoon; however, for 2014, a second Special Tutorial is scheduled on Monday morn-ing. The session leader will make available the necessary presentation material.Technical Tutorials: These tutorials are approximately four hours in length. Tech-nical Tutorials fill two consecutive conference session blocks, and are integratedinto the conference session schedule. At each Technical Tutorial, attendees maypurchase a copy of the Tutorial Notes; the charge is set as low as possible basedon the cost of production. For 2014, the notes for the Technical Tutorials may bepurchased for $25.00 each at the individual tutorial sessions. The Technical Tu-torial notes will be available in either printed or electronic format.Each attendee will receive a Certificate of Attendance, as proof that the attendeehas participated in the two-hour Special Tutorial, or the four-hour Technical Tutorial.PVP Division will not assign Continuing Education Units (CEUs) on these certifi-cates. However, attendees may negotiate CEU credits with their respective licens-ing boards.An outline of the workshop and tutorial sessions for the 2014 PVP Conference ispresented below.

WORKSHOPS TECHNICAL WORKSHOPSunday, July 20, 9:00 am – 11:30 amPacific Room, 2nd Floor, North TowerMicrowave NDE Techniques for Rubber Expansion Joints and HDPE ButtFusions in Power PlantsSponsored by ILD/Evisive, Inc.Bob Stakenborghs, ILD/Evisive, Inc.This workshop will provide an overview on the theory and operation of microwaveNDE for rubber expansion joints and HDPE pipe butt fusions. This NDE techniqueis currently in use on these materials in industries worldwide.SPECIAL TUTORIAL 1Sunday, July 14, 1:00 pm – 3:30 pmPacific Room, 2nd Floor, North Tower Engineering EthicsRobert Switzer, The American University in CairoThis workshop discusses the concepts of Engineering Ethics and ProfessionalLife. The tutorial examines current issues engineering ethics, as central to the lifeand work of professionals in the field of mechanical engineering. In engineeringdoing the morally right thing is largely the same as striving for engineering excel-lence. All too often, however, one encounters conflicts among obligations, leadingto ethical dilemmas; it is in confronting these dilemmas that an understanding ofethical theory, and its application in practice, becomes indispensable. Throughparticipation in this tutorial, attendees will have a clearer understanding of thestate of ethical concern in professional engineering today. Case studies will beused throughout to illustrate key points.

Coffee Breaks and RefreshmentsCoffee and refreshments are available throughout the week in the RoyalBallroom Foyer, 1st Floor, South Tower. This hub of activity features theforums, coffee breaks, guest activity information area, and registration.

6

SPECIAL TUTORIAL 2Sunday, July 20, 4:00 pm – 6:00 pmPacific Room, 2nd Floor, North TowerProcess and Benefits of ASME Pressure Technology Codes & StandardsDevelopmentBill Bees, Consulting Engineer, and Mahendra Rana, Praxair, Inc.Have you ever wondered how all of the Codes & Standards stuff that ASME pro-duces happens? In addition to the advantages and benefits that ASME membersgain from membership in the PVP Division and attendance and participation inthe ASME Pressure Vessel & Piping Conference, ASME can also offer additionalbenefits to folks with these interests in the area of Codes & Standards develop-ment. In this special tutorial, we will:

• Explain the overall process used in development of ASME Codes & Stan-dards, and specifically those in the area of Pressure Technology Codes &Standards;

• Describe the consensus process used in the Codes & Standards develop-ment process and the ANSI approval process;

• Explore the benefits to participants in ASME Codes & Standards develop-ment activities;

• Discuss the various types of participation in the Codes & Standards Com-mittees, qualifications, and the expectations of the participants;

• Explore the relationship between ASME Pressure Vessels & Piping Divisionand ASME Codes & Standards;

• Explain the overall Committee Structure under the Board on Pressure Tech-nology Codes & Standards and their areas of responsibilities; and

• Discuss some of the emerging areas in Pressure Technology and the onescurrently seeking participants.

One of ASME’s most valuable assets is our relationships with the volunteer mem-bers who serve on our Codes & Standards committees. It is ASME’s policy to af-ford all persons with direct and material interest, without regard to country ofcitizenship or residency, the opportunity to participate in the ASME Codes & Stan-dards development process. Membership on a committee normally representsyou as an individual, rather than as a representative of your employer or anotherorganization.The last part of the Special Tutorial will be an open question and answer sessionto discuss any questions you may have. So come and ask the experts about an-other way to get involved with ASME.

TECHNICAL TUTORIALSMonday, July 21, 2:00 pm – 5:45 pmPacific Room, 2nd Floor, North TowerApplication of API 579-1/ASME FFS-1 and BS-7910 Fitness-for-Service Pro-ceduresBostjan Bezensek, Shell UK, Ltd.; Isabel Hadley, TWI Ltd.; Robert Brown,The Equity Engineering Group, Inc.This Technical Tutorial is on the application of API579-1/ASME FFS-1 and BS7910 Fitness-for-Service procedures. The life extension of aging pressurized ves-sels and piping infrastructure requires the Fitness-for-Service evaluation to justifycontinued operation. New challenges in oil & gas exploration require novel ap-proaches in infrastructure installation underpinned by the Engineering Critical As-sessments such as tolerable flaws for pipeline reel lay. Both challenges rely onFitness-for-Services procedures. This tutorial focuses on the application of thetwo procedures commonly used in the conventional power generation and oil &gas industry for performing the engineering critical assessment: BS7910: 2013Guide to Methods for Assessing the Acceptability of Flaws in Metallic Structures,and API 579-1/ASME FFS-1 2007 Fitness-for-Service Code. Each procedure willbe presented followed by the application on examples of assessment of crack-like flaws.

Tuesday, July 22, 2:00 pm – 5:45 pmPacific Room, 2nd Floor, North TowerOverview of Welding Applications and Processes for Power Plant Pipingand Pressure VesselsSteve McCracken, EPRI Welding and Repair Technology Center; Richard(Dick) Smith, Structural Integrity Associates, Inc.This Technical Tutorial is an overview of welding applications and processes forpower plant piping and pressure vessels. Welding is the most common methodfor fabrication and repair of power plant piping systems and pressure vessels. Abasic understanding of the most common welding processes and typical applica-tions is important for individuals involved in fabrication, maintenance, or repair ofpiping and pressure vessels. This tutorial provides a basic overview of weldingprocesses and reviews potential materials issues and problems during welding.This tutorial covers:

• Welding applications for piping and vessels• Typical materials for piping and vessels• Common welding processes• Advantages and disadvantages of each process• Basic welding concepts and controls• Typical weld defects and materials issues• Purpose of ASME welding codes and requirements.

PVP Conference Organizer TrainingTuesday, July 22, 8:30 am – 10:15 amPacific Room, 2nd Floor, North TowerThings You Should Know—Topic Organizers and Session DevelopersD. T. Peters and M. B. Ruggles-Wrenn, PVP Division Executive CommitteeAll current or prospective Technical Program Representatives, Topic Organizers,and Session Developers are encouraged to attend this training. The session willfocus on the duties and responsibilities of the Conference organizers and the“things you should know” to be an efficient member of the PVP Conference or-ganizing team. Numerous examples will be offered, and a question and answerperiod will be an integral part of this training.

NDE and SOFTWARE FORUMSNDE Demonstration ForumMonday, July 21, 8:30 am – 5:45 pmRoyal Ballroom Foyer, 1st Floor, South TowerThe NDE Demonstration Forum will be held on Monday, July 21st. NDE Vendorswill present and discuss their capabilities, equipment, and services in the RoyalBallroom Foyer, 1st Floor, South Tower. For additional information, please contactDr. Carl E. Jaske, Det Norske Veritas (USA), Inc., at [email protected] Demonstration ForumTuesday, July 22, 8:30 am – 5:45 pmRoyal Ballroom Foyer, 1st Floor, South TowerThe Software Demonstration Forum will be held on Tuesday, July 22nd. SoftwareVendors will present and discuss their capabilities, equipment, and services in theRoyal Ballroom Foyer, 1st Floor, South Tower. For additional Information, pleasecontact James F. Cory, Jr., Siemens PLM Software, at [email protected].

SOCIAL PROGRAMS and TOURSConference-Wide Reception—Grand Ballroom, 1st Floor, North TowerMonday, July 21, 6:15 pm – 8:00 pmAll who registered are invited to attend the Reception. Meet with your colleagues,many of whom you may not have seen for a while. Join with the registrants andguests for a relaxing evening.We will have displays of student paper posters at the Conference Wide Receptionto be held on Monday of July 21, 2014. All student authors who participate in the22nd Rudy Scavuzzo Student Paper Symposium and Competition are invited topresent their posters.

No charge for registered conference participants and guests.

7

Mission San Juan Capistrano with Docent TourMonday, July 21, 9:00 am – 3:00 pmSan Juan Capistrano is known as the “Jewel of the Missions.” Mission San JuanCapistrano is a historic landmark and museum that boasts of quality permanentexhibits featuring original artifacts as well as traveling and temporary exhibits ona wide variety of topics. We will arrange a docent guided tour which truly enhancesexperience at the mission. The docents guide you through 10 acres of museumrooms, exhibits, gardens, fountains and more, providing you with the details ofCalifornia’s early history and the birthplace of Orange County.Following the tour you will be free to explore historic San Juan and enjoy shoppingand lunch on your own at one of the numerous restaurants in this historic village.Round trip transportation is included.

Tickets: $52 per person

Queen Mary TourTuesday, July 22, 9:30 am – 2:30 pmThe majestic Queen Mary offers you the chance to step back in time aboard oneof the most famous ocean liners in history. Going back to the days wheresteamships were the quickest and most elegant way to travel, the Queen Marywas the first choice for the elite of high society. Today, you can journey back intime and enjoy the authentic and unique experience offered at this Long Beachattraction.The trip includes round trip transportation and admission to the Queen Mary fora self-guided audio tour of the ship. Learn the history of the Queen Mary whilestrolling the decks with our exclusive Queen Mary headset. Listen to the storiesbehind the pictures and the artwork of the legendary ship, from her groundbreakingconstruction to her royal launch. Following the tour, feel free to have lunch on yourown at one of the numerous restaurants available on the Queen Mary.

Tickets: $52 per person

An Evening at Disney!Wednesday, July 23, 4:00 pm – 11:00 pmCome enjoy the magic of Disney with us for the evening. No trip to southern Cal-ifornia would be complete without a trip to one of Disney’s two theme parks. Dis-neyland opened in 1955 and was Walt Disney’s first theme park. As an option,you could also choose to visit Disney’s California Adventure which opened in 2001.The world class fireworks will provide an excellent end to a fantastic evening atthe park.The evening will include a shuttle to and from the hotel to the theme park and en-trance to your choice of one of the two parks for the evening. You can have aleisurely evening exploring the innovation and imagination of Disney’s creativity.Dinner will be on your own while at the parks. You can choose to return to thehotel anytime. Shuttles will be available every half hour to return to the hotel any-time you wish, until the park closes.

Tickets: $55 per personCONFERENCE INFORMATION

Technical Sessions and ProgramsAll technical sessions will be held on the 1st floor of the North and South Towersof the Hotel. Each room will be equipped with an LCD projector that can be con-nected to a personal computer for electronic presentations (e.g., Microsoft Pow-erPoint). Please note that ASME will not provide personal computers, 35-mm slideprojectors, VCRs, or overhead projectors. Personal computers are the responsi-bility of the session developer, or presenter. It is strongly recommended that au-thors provide their materials to the session developer at, or before, the Authors’Breakfast, so that all the papers in a session can be loaded onto a single computer.Authors are recommended to have their presentations on a flash (pen) drive, inthe event that compatibility problems occur between their computers and the LCD.The location of the session rooms is shown in the Hotel Floor Plan on the backcover of this program.Rudy Scavuzzo Student Paper Symposium and 22nd Annual Student PaperCompetitionMon., July 21st, 8:30 am – 10:15 am & 2:00 pm – 5:45 pmTues., July 22nd, 8:30 am – 12:15 pm & 2:00 pm – 5:45 pmWed., July 23rd, 8:30 am – 10:15 amRoyal Ballroom – A (South Tower)The 2014 Rudy Scavuzzo Student Paper Symposium and 22nd Annual StudentPaper Competition is sponsored by the PVPD Senate. Young W. Kwon, PVPDSenate President, and Ronald S. Hafner, PVPD Senate Vice-President and Histo-rian, will conduct the sessions, together with the Student Symposium and Compe-tition representatives from each PVP Technical Committee. The Senate ReviewCommittee will identify the outstanding Finalist undergraduate and graduate studentpapers in two categories: the BS/MS level and the Ph.D. level. Finalist papers willbe judged on written technical content (70%) and presentation effectiveness (30%).A $1,500 award will be made to each of the presenting Student Competition Finalistauthors during the Honors and Awards Luncheon, on Wednesday, July 23rd. Inaddition, in each category (i.e., BS/MS and Ph.D.), $1,200 will be awarded to thepresenting author of the Outstanding Student Paper; $1000 will be awarded to thepresenting author of the First Runner-Up Student Paper, and $800 will be awardedto the presenting author of the Second Runner-Up Student Paper. Students mustattend the Conference, and must present their papers to be eligible for an award.The winners will be announced at the Honors and Awards Luncheon.Technical Committee MeetingsMonday & Tuesday, July 21st & 22nd, 12:15 pm – 1:45 pmThe Pressure Vessels & Piping Division Technical Committees will meet duringthe noon break on Monday, July 21st, and Tuesday, July 22nd. Visitors are en-

Badge Required for all EventsPlease wear your badge for admission to all Conference activities.

Your badge also provides a helpful introduction to other Confer-ence attendees.

8

couraged to attend and take an active part in PVP committee activities. All com-mittee meetings, schedules, and rooms are listed on Page 10.Honors and Awards LuncheonWednesday, July 23rd, 12:30 pm – 2:15 pmGrand Ballroom,1st Floor, North Tower The Honors and Awards Luncheon, honoring all Division Award Recipients andthe 2014 ASME S. Y. Zamrik PVP Medalist, Dr. A. G. (Jack) Ware, will be held onWednesday, July 23rd, from 12:30 pm, until approximately 2:15 pm, in the GrandBallroom, 1st Floor, North Tower. One ticket is included in the Full Conferenceregistration fee. Additional tickets may be purchased at the Conference Registra-tion desk.Authors’ Breakfast/BriefingMonday, July 21st – Thursday, July 24th, 7:30 am – 8:15 amGrand Ballroom,1st Floor, North TowerAuthors, Panelists, Session Developers, Chairs, and Vice-Chairs are requestedto attend a breakfast briefing in the Grand Ballroom,1st Floor, North Tower, onMonday through Thursday, at 7:30 am, on the morning of their sessions. Sessionprotocol will be discussed, and the participants will have the opportunity to becomebetter acquainted with one another before their scheduled sessions. Authors areencouraged to place all the presentations for their session on a single computereither before or at the Authors’ Breakfast.Registration HoursRoyal Ballroom Foyer, 1st Floor, South TowerLocated in the Royal Ballroom Foyer, 1st Floor, South Tower, the ASME registra-tion desk will be open during the following hours, to provide advance registrantswith their materials, to process on site registrations, and to provide additional Con-ference information:

Sunday, July 20 8:00 am – 6:00 pmMonday, July 21 7:30 am – 4:00 pmTuesday, July 22 7:30 am – 4:00 pmWednesday, July 23 7:30 am – NoonThursday, July 24 7:30 am – 3:00 pm

On-Site Registration FeesFor those not registered in advance, the On-Site Registration Fees are as follows:

Full Registration* One Day Registration**ASME Member $665 $565 Author/Panelist $665 $565 Session Chair $665 $565 Session Vice Chair $665 $565 Coop. Soc. Member*** $665 $565 Non-Member**** $765 $640 ASME Life Member† $150 $150ASME Member Student (Author) ‡ $200 $200Student Non-Member (Author or Non-Author) ‡‡ $200 $200Guest/Spouse ‡‡‡ N/C N/C * Full Registration fees include admission to all technical sessions, coffee

breaks, a Conference CD and one (1) ticket for the Honors and AwardsLuncheon.

** One Day Registration fees include a Conference CD and admission to tech-nical sessions for one-day.

*** To qualify for discounted registration fees, you must be a member of ASME,or one of the cooperating societies. Please fill in your society affiliation andmembership number on the registration form.

**** Anyone paying the non-member fee is eligible to receive one year’s mem-bership to ASME as part of their registration fee.

† Registration under this category includes access to all technical sessions,admission to the Plenary Session and Conference-Wide Reception, and aConference CD. Life registrants will be required to purchase a ticket to attendthe Honors and Awards Luncheon, if desired.

‡ Student Author Full Registration Fee includes admission to all technical ses-sions, coffee breaks, opening reception, a Conference CD and one (1) ticketfor the Honors and Awards Luncheon.

‡‡ Student Non-Author Full Registration Fees include admission to all technicalsessions, coffee breaks, opening reception, a Conference CD, only. Studentsnot in the Student Paper Competition will be required to purchase a ticket toattend the Honors Luncheon, if desired.

‡‡‡ Guest registration includes entrance to the opening reception, and a dailyguest breakfast. Guests wishing to attend Honors Luncheon will be requiredto purchase a ticket.

Cooperating Societies If you are a member of a Cooperating Society, you may register at the ASMEmember rate. Conference Publications Royal Ballroom Foyer, 1st Floor, South Tower Papers presented at the ASME PVP 2014 Conference are published on a CDavailable at the Conference. Information on paper titles and authors are includedin the Final Program. All attendees registered for the entire Conference (i.e., FullRegistration) will receive one CD containing all the technical papers presented atthe Conference. Bound volumes of Conference Proceedings may be ordered at the Conference,for post-conference shipping, subject to there being sufficient demand for the re-spective volumes. A list of volumes is available in the Conference publicationroom, which features a variety of ASME publications. Ship Your Conference Proceedings You can ship your ASME Publications to your home or office right from the Con-ference. Bring your books to the shipping booth in the Publication Sales room,and they will be packaged and shipped for you. Inquire at the Publication Salesroom for location and fees. Disabled Registrants Whenever possible, arrangements can be made for disabled registrants, if ad-vance notice is given. Please indicate any special needs on the registration form,or contact Jamie Hart at [email protected] with your request. Tax Deductibility Expenses of attending professional meetings have been held to be tax deductibleas ordinary business expenses for U.S. citizens. Please verify the tax regulationsin your country to determine whether Conference expenses are deductible. Guest/Family Programs Guests and family members of registrants are welcome at the Guest Programsthat include: Mission San Juan Capistrano Tour (Monday), the Conference WideReception at the Hyatt Regency Orange County (Monday evening), the QueenMary Tour (Tuesday), and An Evening at Disney (Wednesday evening). Badgesare required for admission to all events. A guest program activities packet is also included. Please indicate how manyguests you will be bringing on your registration form, so that the necessary ac-commodations can be arranged. Please also note that the tours have an associated fee for participants, as is shownon the registration form, and in this booklet. Early registration is strongly recom-mended for the events that require fees, as they are available only on a first-come,first-served basis. Professional Development Hours Available Professional Development Hours are available for your attendance at the PVPConference. Simply stop by the registration desk and fill out a certificate requestform with the sessions that you have attended. The certificates can then be pickedup on Thursday at the registration desk. Publishing Conference Papers in the ASME Journal of Pressure Vessel Tech-nology Technical papers presented at the ASME PVP 2014 Conference are published inthe form of the ASME Conference Proceedings on a CD. Publication of papers inthese proceedings does not preclude authors from publishing their papers inASME archival journals, such as the ASME Journal of Pressure Vessel Technology(i.e., the Journal), which is the technical voice of the Pressure Vessels & PipingDivision.

9

Authors are encouraged to submit their papers to the Journal. The Journal is ed-ited by Dr. Young W. Kwon, and manuscripts should be submitted to the addressbelow. Manuscripts should be prepared according to the Journal guidelines, whichcan be found at the ASME web site at:

http://journaltool.asme.org/Content/index.cfm.

Dr. Young W. Kwon, Editor Journal of Pressure Vessel Technology Dept. of Mechanical & Astronautical Engineering 700 Dyer RoadNaval Postgraduate SchoolMonterey, CA 93943Ph/Fax: 831-656-3468 / 2238E-mail: [email protected]

10

PVP 2014 COMMITTEE MEETINGSDate/Time Meeting Room Responsible PersonSaturday, July 19, 20142:00 – 5:00 pm PVPD General Committee Special Meeting Pacific Room M. NitzelSunday, July 20, 2014 8:30 am – 12:30 pm PVPD Executive Committee Commodore Boardroom M. Nitzel 1:30 pm – 2:30 pm PVP Senate Commodore Boardroom Y. KwonMonday, July 21, 2014 12:15 pm – 1:45 pm PVPD Codes and Standards Technical Committee Pacific Room K. Hasegawa/R. Cipolla12:15 pm – 1:45 pm PVPD Fluid-Structure Interaction Technical Committee Salon II C. Giannopapa 12:15 pm – 1:45 pm PVPD Operations, Applications and Components Technical Committee Salon VII+VIII S. Hensel/M. Feldman 12:15 pm – 1:45 pm PVPD Design and Analysis Technical Committee Harbor Room T. Seipp2:00 pm – 3:15 pm PVPD International Coordination Committee Commodore Boardroom M. BrongersTuesday, July 22, 2014 10:30 am – 12:15 pm PVPD Professional Development Salon VII+VIII M. Younan10:30 am – 12:15 pm PVPD Communications Committee Commodore Boardroom M. Ruggles-Wrenn12:15 pm – 1:45 pm PVPD Materials and Fabrication Technical Committee Pacific Room D. Rudland 12:15 pm – 1:45 pm PVPD Seismic Engineering Technical Committee Salon II T. Taniguchi12:15 pm – 1:45 pm PVPD High Pressure Technology Technical Committee Salon VII+VIII R. Dixon/D. Stang12:15 pm – 1:45 pm PVPD Computer Technology and Bolted Joints Technical Committee Harbor Room W. Reinhardt 2:00 pm – 3:45 pm PVPD Honors and Awards Committee Commodore Boardroom D. Scarth 4:00 pm – 5:45 pm PVP2014/2015 Program Committee Commodore Boardroom M. Ruggles-Wrenn 8:30 am – 12:00 pm Subgroup High Pressure Vessels Committee (BPV VIII) Salon VII+VIII R. Dixon/A. Maslowski2:00 pm – 5:45 pm Subgroup High Pressure Vessels Committee (BPV VIII) Salon VII+VIII R. Dixon/A. MaslowskiWednesday, July 23, 2014 10:30 am – 12:15 pm JPVT Editors Commodore Boardroom Y. Kwon2:00 pm – 4:00 pm NDE Division Meeting Commodore Boardroom B. Springer2:00 pm – 5:00 pm Task Group Impulsively Loaded Vessels (BPV VIII) Salon VII+VIII E. Rodriguez/A. MaslowskiThursday, July 24, 2014 8:30 am – 12:15 pm PVPD Executive Committee Commodore Ballroom D. Peters12:30 pm – 3:45 pm PVPD General Committee Grand Ballroom D. Peters 4:00 pm – 5:45 pm PVPD Conference Evaluation Grand Ballroom P. Mertiny

11

PUBLICATIONSPapers presented at the 2014 PVP Conference will be published in bound volumes, to be purchased at the conference for post-conference shipping, subject to sufficientdemand from the authors. The list of volumes is presented below. Other books of interest, Codes and Standards, Transactions, Journals and free literature regardingASME publications will be available at the conference. During the Conference, all publications will be sold at the ASME member price. Prepaid orders will be taken for publications that are not available at the Conference.All fully-paid Conference registrants will receive a CD-ROM containing the papers presented at PVP2014. A complete set of the volumes covering the 2014 PVP Con-ference publications may be purchased as a package at a 10% discount. ASME accepts payment in cash ($US), checks ($US), travelers’ checks ($US), VISA, MasterCard,American Express, Diners Club, and Discover (all credit card charges in $US). Technical papers and bound volumes may be ordered after the Conference by contactingthe ASME Order Department, 22 Law Drive, P.O. Box 2300, Fairfield, NJ 07007-2300 or by calling 1-800-THE-ASME. Payment by check or credit card (VISA, MasterCard,American Express, Diners Club, and Discover) must accompany your order. California, Georgia, Illinois, and Texas purchasers must add the appropriate sales tax orfurnish a tax exemption certificate. Non-US checks are not accepted. You may also ship your Conference publications home, or to your office, right from the Publication Sales. A shipping booth will be set up for your convenience, so youdo not have to carry your books home. The Publication Sales area, located in the Royal Ballroom Foyer, near the Registration Desk, will be open during the following hours:

Sunday, July 20 3:00 pm – 6:00 pm Monday, July 21 8:00 am – 4:00 pm Tuesday, July 22 8:00 am – 4:00 pm Wednesday, July 23 8:00 am – Noon Thursday, July 24 8:00 am – 3:00 pm

Volume Titles and Volume EditorsVolumes

No. ofPapers

ConferencePrice

Codes & Standards—2014, edited by S. X. Xu and K. Hojo (Topics include Structural Integrity of Pressure Components; Ratcheting and FatigueIssues; Environmental Fatigue Issues; Interaction and Flaw Modeling for Multiple Flaws; Technical Harmonization and Emerging Codes andStandards; ASME Code Section III; ASME Code Section XI; Recent Developments in ASME, Japanese, Chinese, European Codes & Standards;High Temperature; Repair, Replacement and Mitigation for Fitness-for-Service Rules; Probabilistic and Risk Based Assessment; Combinationof Multiple Loads; HDPE Pipe and Related Issues; Integrity of Cast Stainless Steel Pipes; Fatigue Monitoring and Related Assessment Methods;Fracture and Mechanical Property Predictions)

121 $68

Computer Technology & Bolted Joints—2014, edited by X. Duan (Topics include Design and Analysis of Bolted Flange Joints; Design andAnalysis of Pressure Sealed Joints; Explicit and Implicit Nonlinear FEA; Assembly and Tightening of Bolted Joints; Threaded Fasteners; ElevatedTemperature Behavior of Bolted Joints; Computational Applications in Limit Analysis; Elastic-Plastic Analysis and Creep; Probabilistic and RiskBased Assessment)

27 $28

Design and Analysis—2014, edited by S. Morrison (Topics include Pressure Vessels, Heat Exchangers and Components; Design & Analysisof Piping & Piping Components; Fatigue; Fracture; Inelastic, Nonlinear Analysis and Limit Load Analysis; Stress Classification and Design byAnalysis Methodologies; Composite Materials and Structures; Thermal Stresses and Elevated Temperature Design; Fitness for Service Evalu-ations and Post Construction Issues; Piping and Equipment Dynamics & Dynamic Response Analysis; Design and Analysis of Bolted Joints;Probabilistic Methods; CFD)

114 $63

Fluid-Structure Interaction—2014, edited by K. Inaba (Topics include Thermal-Hydraulic Phenomena and Interaction with Vessels, Piping,and Components; 18th International Symposium on Emerging Technologies; Structures under Extreme Loading Conditions; Fluid-Structure In-teraction Issues in Aeronautical Engineering; Flow-Induced Vibrations)

98 $58

High-Pressure Technology, Nondestructive Evaluation, Nuclear Engineering, and Student Paper Competition—2014, edited by K. Simp-son, D. Stang, W. Springer, and Y. Kwon (Topics include Design, Analysis, Operation and Life Prediction of High-Pressure Vessels; StructuralResponse to Highly Dynamic (Impulsive) Events; Compressors in High-Pressure Applications; Composite Materials for High-Pressure Vesselsand Components; NDE and Fitness for Service of High-Pressure Vessels; and Student Papers)

67 $45

Materials and Fabrication—2014, edited by M. Brongers (Topics include Application of Fracture Mechanics to Failure Assessment; Materialsfor Hydrogen Service; Welding Residual Stress and Distortion Simulation and Measurement; European Programs in Structural Integrity; Fitnessfor Service and Failure Assessment; Materials and Technologies for Nuclear Power Plants; Fracture Reliability and Probabilistic Assessment ofFailure; Mechanistic Modeling of Materials; Integrity Issues in SCC and Corrosion Fatigue; Pipeline Integrity; Small-scale and Miniature MechanicalTesting; Leak-Before-Break; Plastic Pipe; Fatigue and Fracture of Welds and Heat Affected Zones; Creep and Creep-Fatigue Interaction; Com-posite Systems for Pressure Vessels and Piping; Manufacturing and mitigation Process Simulation; Advanced Manufacturing and Material Tech-nology for New Nuclear Builds)

168 $83

Operations, Applications & Components—2014, edited by Z. Han (Topics include Safety, Reliability and Risk Assessment; Monitoring, Diag-nostics and Inspection; Toxic Substances: Storage and Transportation; Operations and Maintenance of Pressure Vessels, Heat Exchangers,Piping and Supports; Plant Life Extension: Aging and Life Management)

32 $33

Seismic Engineering—2014, edited by C.-S. Tsai (Topics include Structural Dynamics—Linear and Nonlinear; Seismic Analysis and Design ofPiping Systems; European Research on Structural Safety of Industrial Facilities; Base Isolation and Structural Control Technology; Seismic Re-sponse and Design of Storage Tanks, Piping and Other Components; Seismic Response Mitigation for Mechanical Structures and Energy Fa-cilities)

57 $40

12

PVP 2015Boston

Boston Park PlazaJuly 19–23, 2015

ASME Pressure Vessels & Piping ConferenceNew Frontiers in Pressure Vessels and Piping

PVP-2015 Join us in historic Boston, Massachusetts for the 2015 ASME Pressure Vessels & Piping Conference! More than 180 paper and panel sessions are planned,as well as tutorials, Non-Destructive Examination (NDE) and Software demonstration forums, and the 23rd Rudy Scavuzzo Student Paper Symposium and Competition.The PVP Conference is a great place to present your ideas and to meet colleagues as we work to create and advance Pressure Vessel and Piping technologies for ourglobal community of practice. The PVP Conference is a recognized forum for fruitful exchange of ideas with participants from over 40 countries in Europe, Africa, theMiddle East, Asia, the Americas, and the Oceania islands. The ASME Pressure Vessels & Piping Division will sponsor the PVP-2015 Conference with participation bythe ASME NDE Division. GENERAL TOPICS: (1) Codes & Standards; (2) Computer Technology & Bolted Joints; (3) Design & Analysis; (4) Fluid-Structure Interaction; (5) High Pressure Tech-nology; (6) Materials & Fabrication; (7) Operations, Applications & Components; (8) Seismic Engineering; (9) Non-Destructive Examination; and (10) 23rd Rudy ScavuzzoStudent Paper Symposium and Competition. SCHEDULE: Abstracts are due by November 10, 2014. Authors will be notified of abstract acceptance by December 1, 2014. Draft papers are due by February 9,2015. Paper peer review comments will be returned by March 9, 2015. A Copyright Agreement Form for each paper must be submitted by April 1, 2015. The final man-uscripts in the standard ASME format for publication must be received by April 6, 2015. All presented technical papers will be published as referenceable documentsavailable post-conference via hardcopy or electronic media.INFORMATION: The conference website URL is: http://www.asmeconferences.org/PVP2015/. Technical paper abstracts must be submitted electronically through thewebsite. Visit the website for additional information.

PVP Conference Chair PVP Technical Program ChairMarina B. Ruggles-Wrenn Douglas A. Scarth

Air Force Institute of Technology Kinectrics Inc.2950 Hobson Way 800 Kipling Ave

WPAFB, OH 45433-7765, USA Toronto, Ontario, CanadaPhone: 937-255-3636 ext. 4641 Phone: 416-207-6000 ext 6383 / 416-207-6094

Email: [email protected] E-mail: [email protected] Chair

Carl E. JaskeDet Norske Veritas (USA), Inc.

5777 Frantz Road Dublin, OH 43017-1386, USA

Phone/Fax: 614-761-6916 / 614-761-1633 E-mail: [email protected]

13

Sunday, July 20, 2014

Block 0.1: Sunday, July 14, 2014 (9:00 am – 11:30 am)0.1Q (TW-1-6) WORKSHOP 1 MICROWAVE NDE TECHNIQUES FOR RUB-

BER EXPANSION JOINTS AND HDPE BUTT FUSIONS INPOWER PLANTS

Block 0.3: Sunday, July 14, 2014 (1:00 pm – 3:30 pm)0.2Q (TW-1-4) SPECIAL TUTORIAL 1 ENGINEERING ETHICSBlock 0.4: Sunday, July 14, 2014 (4:00 pm – 6:00 pm)0.3Q (TW-1-5) SPECIAL TUTORIAL 2 BENEFITS OF ASME CODES AND

STANDARDS

Monday, July 21, 2014

Block 1.1: Monday, July 21, 2014 (8:30 am – 10:15 pm)1.1A (MF-15-1) COMPOSITE PRESSURE VESSELS1.1B (SPC-2-1) STUDENT PAPER SYMPOSIUM 11.1C (CS-8-1) ASME SC III C&S ACTIVITIES FOR HTRS1.1D (FSI-4-1) 18TH INTERNATIONAL SYMPOSIUM ON EMERGING TECH-

NOLOGY FOR FLUIDS, STRUCTURES, AND FLUID-STRUC-TURE INTERACTIONS—INDUSTRIAL AND AERONAUTICALAPPLICATIONS

1.1E (MF-4-1) 3D SIMULATIONS1.1F (MF-5-1) EUROPEAN PROGRAMS IN STRUCTURAL INTEGRITY I1.1G (DA-1-1) DESIGN AND ANALYSIS OF PRESSURE VESSELS AND

COMPONENTS1.1H (HT-1-1) DESIGN, ANALYSIS, AND LIFE PREDICTION OF HIGH-

PRESSURE VESSELS1.1I (DA-13-2) FRACTURE 21.1J (CS-19-1) INTEGRITY OF CAST STAINLESS STEEL PIPE1.1K (OAC-6-1) CONTINUED SAFE OPERATION OF EXISTING ASSETS1.1L (CT-2-1) DESIGN AND ANALYSIS OF BOLTED FLANGE JOINTS1.1M (SE-1-1) SEISMIC SAFETY MARGIN STUDIES OF OPERATING

PLANTS (INTERNATIONAL TOPICS)1.1N (FSI-3-1) BLUFF BODY/NEAR WAKE INTERACTIONS I1.1O (MF-19-1) CREEP DAMAGE AND FAILURE PREDICTION1.1S (MF-26-1) NDE DEMONSTRATION FORUM—I

Block 1.2: Monday, July 21, 2014 (10:30 am – 12:15 pm)1.2BLRM (TW-1-7) OPENING CEREMONY AND PLENARY LECTURES1.2S (MF-26-2) NDE DEMONSTRATION FORUM—IIBlock 1.3: Monday, July 21, 2014 (2:00 pm – 3:45 pm)1.3A (MF-15-2) COMPOSITE PIPING SYSTEMS1.3B (SPC-1-1) STUDENT PAPER COMPETITION 1: BS/MS LEVEL1.3C (CS-8-2) ASME SC III C&S ACTIVITIES FOR LWRS1.3D (FSI-3-18) FLUTTER / AEROELASTICITY / AERODYNAMICS II1.3E (MF-4-2) MITIGATION OF RESIDUAL STRESS1.3F (MF-5-2) EUROPEAN PROGRAMS IN STRUCTURAL INTEGRITY II1.3G (DA-1-2) DESIGN AND ANALYSIS OF HEAT EXCHANGERS AND COM-

PONENTS1.3H (HT-3-1) DESIGN AND ANALYSIS OF HIGH-PRESSURE COMPRES-

SORS FOR POLYETHYLENE PRODUCTION AND OTHER IN-DUSTRIAL APPLICATIONS

1.3I (DA-13-1) FRACTURE 11.3J (MF-14-2) LBB ANALYSIS AND ASSESSMENT—PART 11.3K (OAC-6-2) FAILURE MECHANISMS, REMEDIES AND PREVENTION1.3L (CT-4-1) TIGHTNESS AND FUGITIVE EMISSIONS1.3M (SE-13-1) SEISMIC ANALYSIS AND DESIGN OF PIPING SYSTEMS—I1.3N (FSI-3-2) BLUFF BODY/NEAR WAKE INTERACTIONS II1.3O (MF-19-2) CREEP AND CREEP-FATIGUE CRACK GROWTH1.3Q (TW-1-1) TECHNICAL TUTORIAL 1—APPLICATION OF API 579-

1/ASME FFS-1 AND BS 7910 FITNESS-FOR-SERVICE PRO-CEDURES—PART I

1.3S (MF-26-3) NDE DEMONSTRATION FORUM—IIIBlock 1.4: Monday, July 21, 2014 (4:00 pm – 5:45 pm)1.4A (MF-16-1) PLASTIC PIPE—I1.4B (SPC-1-2) STUDENT PAPER COMPETITION 2: BS/MS LEVEL1.4C (CS-2-1) RATCHETING AND FATIGUE ISSUES IN PRESSURE VES-

SEL AND PIPING DESIGN1.4D (FSI-3-19) FLUTTER / AEROELASTICITY / AERODYNAMICS I1.4E (MF-4-3) VALIDATION OF RESIDUAL STRESS PREDICTIONS1.4F (MF-5-3) EUROPEAN PROGRAMS IN STRUCTURAL INTEGRITY III1.4G (DA-1-3) DESIGN & ANALYSIS OF PRESSURE VESSELS, HEAT EX-

CHANGERS & COMPONENTS 31.4H (HT-3-2) DESIGN AND ANALYSIS OF HIGH-PRESSURE COMPRES-

SORS FOR POLYETHYLENE SERVICE1.4I (DA-13-3) FRACTURE 31.4J (MF-14-3) LBB ANALYSIS AND ASSESSMENT—PART 21.4K (OAC-6-3) REPAIR TECHNOLOGY1.4L (CT-5-1) THREADED FASTENERS1.4M (SE-3-1) EUROPEAN RESEARCH ON STRUCTURAL SAFETY OF IN-

DUSTRIAL FACILITIES1.4N (FSI-3-3) MODELING METHODS AND FSI IN MECHANICAL AND BIO-

LOGICAL SYSTEMS1.4O (MF-19-4) CREEP DEFORMATION AND RUPTURE PREDICTION1.4Q (TW-1-9) TECHNICAL TUTORIAL 1—APPLICATION OF API 579-

1/ASME FFS-1 AND BS 7910 FITNESS-FOR-SERVICE PRO-CEDURES—PART II

1.4S (MF-26-4) NDE DEMONSTRATION FORUM—IV

Tuesday, July 22, 2014

Block 2.1: Tuesday, July 22, 2014 (8:30 am – 10:15 am)2.1A (MF-16-2) PLASTIC PIPE—II2.1B (SPC-1-3) STUDENT PAPER COMPETITION 3: PHD LEVEL2.1C (CS-3-1) ENVIRONMENTAL FATIGUE ISSUES—I 2.1D (CS-1-1) THE JAMES FARR MEMORIAL SYMPOSIUM ON STRUC-

SESSION TITLES BY SESSION BLOCKSessions are arranged in Session Blocks in the format X.YZ, where: X indicates the Day, Y indicates the Session Block, and Z indicates the Conference Session Room.Conference Session Rooms are as follows: A = Terrace E+F (South Tower); B = Royal Ballroom A (South Tower); C = Terrace A+B (South Tower); D = Regal (SouthTower); E = Imperial (South Tower); F = Terrace C+D (South Tower); G = Grand Ballroom E (North Tower); H = Grand Ballroom G (North Tower); I = Royal Ballroom E+F(South Tower); J = Garden 1 (North Tower); K = Garden 2 (North Tower); L = Royal Ballroom D (South Tower); M = Royal Ballroom C (South Tower); N = Grand BallroomF (North Tower); O = Royal Ballroom B (South Tower); P = Not Used; Q = Pacific (North Tower); R = Not Used; S = Royal Ballroom Foyer (South Tower); T = Not Used.The parenthetical designations are the Technical Committee session references.

The Technical Committee acronyms used are shown below: • CS = Codes & Standards • CT = Computer Technology & Bolted Joints • DA = Design & Analysis • FSI = Fluid–Structure Interaction • HT = High Pressure Technology • MF = Materials & Fabrication • NDE = ASME Nondestructive Evaluation Division • OAC = Operations, Applications, and Components • SE = Seismic Engineering • SPC = Rudy Scavuzzo Student Paper Symposium & Student Paper

Competition • TW = Technical Tutorials and Workshops

All sessions are sponsored by the indicated Technical Committee unlessspecifically noted in the daily listing of individual sessions beginning onpage 16.

14

TURAL INTEGRITY OF PRESSURE COMPONENTS—I2.1E (MF-4-4) RESIDUAL STRESS PROFILES2.1F (SE-4-1) PIPE COMPONENTS AND FITTINGS UNDER STRONG

CYCLIC AND SEISMIC LOADING—I2.1G (DA-1-4) DESIGN & ANALYSIS OF PRESSURE VESSELS, HEAT EX-

CHANGERS & COMPONENTS 42.1H (DA-12-1) CFD IN DESIGN AND ANALYSIS2.1I (MF-10-1) MECHANISTIC MODELLING OF MATERIALS I (COMBINED

SESSION WITH SMALL SCALE AND MINIATURE MECHANI-CAL TESTING)

2.1J (DA-2-1) DESIGN & ANALYSIS OF PIPING & COMPONENTS I2.1K (OAC-1-1) SAFETY OF PRESSURIZED SYSTEMS2.1L (CT-6-1) ASSEMBLY OF BOLTED JOINTS2.1M (CS-9-1) ASME SECTION XI CODE ACTIVITIES—I2.1N (FSI-3-4) FLUID-ELASTIC INSTABILITIES OF CYLINDER ARRAYS I2.1O (MF-19-5) CREEP DAMAGE AND FAILURE PREDICTION2.1Q (TW-1-8) PVP SESSION DEVELOPER TRAINING2.1S (CT-17-1) SOFTWARE DEMONSTRATION FORUM—IBlock 2.2: Tuesday, July 22, 2014 (10:30 am – 12:15 pm)2.2A (DA-6-1) COMPOSITE MATERIALS AND STRUCTURES2.2B (SPC-1-4) STUDENT PAPER COMPETITION 4: PHD LEVEL2.2C (CS-3-2) ENVIRONMENTAL FATIGUE ISSUES—II2.2D (CS-1-2) THE JAMES FARR MEMORIAL SYMPOSIUM ON STRUC-

TURAL INTEGRITY OF PRESSURE COMPONENTS—II2.2E (MF-4-5) MATERIAL MODELING FOR WELDING RESIDUAL STRESS

SIMULATION2.2F (SE-4-2) PIPE COMPONENTS AND FITTINGS UNDER STRONG

CYCLIC AND SEISMIC LOADING—II2.2G (CS-12-1) RECENT DEVELOPMENT IN EUROPEAN CODES AND

STANDARDS2.2H (MF-12-1) PIPELINE INTEGRITY2.2I (MF-10-2) MECHANISTIC MODELLING OF MATERIALS II (CLEAVAGE

FRACTURE AND CRACK GROWTH)2.2J (DA-2-2) DESIGN & ANALYSIS OF PIPING & COMPONENTS II2.2K (OAC-1-2) RELIABILITY AND RISK ASSESSMENT2.2L (CT-9-1) PANEL SESSION: ISSUES RELATED TO BOLTED FLANGE

JOINTS2.2M (CS-14-1) REPAIR, REPLACEMENT, AND MITIGATION FOR FITNESS-

FOR-SERVICE RULES2.2N (FSI-3-5) FLUID-ELASTIC INSTABILITIES OF CYLINDER ARRAYS II2.2O (HT-5-2) PANEL SESSION: DISCUSSION OF INCLUSION OF

API17TR8 REQUIREMENTS IN ASME CODES AND STAN-DARDS

2.2S (CT-17-2) SOFTWARE DEMONSTRATION FORUM—IIBlock 2.3: Tuesday, July 22, 2014 (2:00 pm – 3:45 pm)2.3A (MF-23-1) ADVANCED SENSOR TECHNOLOGIES FOR MONITORING

STRUCTURAL INTEGRITY OF PVP SYSTEMS2.3B (SPC-2-2) STUDENT PAPER SYMPOSIUM 22.3C (CS-3-3) ENVIRONMENTAL FATIGUE ISSUES—III2.3D (CS-1-3) THE JAMES FARR MEMORIAL SYMPOSIUM ON STRUC-

TURAL INTEGRITY OF PRESSURE COMPONENTS—III2.3E (MF-4-6) RESIDUAL STRESS MEASUREMENT TECHNIQUES2.3F (MF-7-1) MATERIALS AND TECHNOLOGIES FOR NUCLEAR POWER

PLANTS—I2.3G (CS-16-1) INTEGRITY ISSUES FOR BURIED PIPE—I2.3H (HT-2-1) STRUCTURAL RESPONSE OF VESSELS AND PIPING DUE

TO HIGHLY DYNAMIC (IMPULSIVE) EVENTS2.3I (FSI-9-2) IAEA ACTIVITIES ON FLUID STRUCTURE INTERACTION

FOR NUCLEAR POWER PLANT2.3J (DA-2-5) DESIGN & ANALYSIS OF PIPING & COMPONENTS V2.3K (OAC-3-1) MONITORING, DIAGNOSTICS AND INSPECTION2.3L (DA-10-4) PANEL SESSION: PRESSURE BOUNDARY BOLTED JOINTS:

INTERNATIONAL LIAISON SESSION 12.3M (CS-17-1) COMBINATION OF MULTI-AXIAL LOADS IN DESIGN AND

FITNESS-FOR-SERVICE2.3N (FSI-3-6) FLOW-INDUCED VIBRATION OF STRUCTURAL COMPO-

NENTS2.3O (CS-13-1) HIGH TEMPERATURE CODES AND STANDARDS—I2.3Q (TW-1-3) TECHNICAL TUTORIAL 2—OVERVIEW OF WELDING APPLI-

CATIONS AND PROCESSES FOR POWER PLANT PIPINGAND PRESSURE VESSELS—PART I

2.3S (CT-17-3) SOFTWARE DEMONSTRATION FORUM—IIIBlock 2.4: Tuesday, July 22, 2014 (4:00 pm – 5:45 pm)2.4A (SE-13-2) SEISMIC ANALYSIS AND DESIGN OF PIPING SYSTEMS—II2.4B (SPC-2-3) STUDENT PAPER SYMPOSIUM 32.4C (CS-3-4) ENVIRONMENTAL FATIGUE ISSUES—IV2.4D (CS-1-4) THE JAMES FARR MEMORIAL SYMPOSIUM ON STRUC-

TURAL INTEGRITY OF PRESSURE COMPONENTS—IV2.4E (MF-4-7) FE MODELING FOR WELDING SIMULATIONS2.4F (MF-7-2) MATERIALS AND TECHNOLOGIES FOR NUCLEAR POWER

PLANTS—II2.4G (CS-16-2) INTEGRITY ISSUES FOR BURIED PIPE—II2.4H (CS-6-1) API 579/ASME CODE FITNESS-FOR-SERVICE ACTIVITIES2.4I (FSI-5-1) STRUCTURES UNDER EXTREME LOADING CONDITIONS2.4J (DA-2-4) DESIGN & ANALYSIS OF PIPING & COMPONENTS IV2.4K (OAC-5-1) PUMPS AND VALVES2.4L (DA-10-5) PANEL SESSION: PRESSURE BOUNDARY BOLTED JOINTS:

INTERNATIONAL LIAISON SESSION 22.4M (DA-8-1) FITNESS FOR SERVICE EVALUATIONS & POST CON-

STRUCTION ISSUES 12.4N (FSI-3-7) FSI MODELING AND DYNAMICS OF SUBMERGED STRUC-

TURES2.4O (CS-13-2) HIGH TEMPERATURE CODES AND STANDARDS—II2.4Q (TW-1-10) TECHNICAL TUTORIAL 2—OVERVIEW OF WELDING APPLI-

CATIONS AND PROCESSES FOR POWER PLANT PIPINGAND PRESSURE VESSELS—PART II

2.4S (CT-17-4) SOFTWARE DEMONSTRATION FORUM – IV

Wednesday, July 23, 2014

Block 3.1: Wednesday, July 23, 2014 (8:30 am – 10:15 am)3.1A (CT-10-1) NEW AND EMERGING METHODS OF ANALYSIS AND APPLI-

CATIONS3.1B (SPC-2-4) STUDENT PAPER SYMPOSIUM 43.1C (DA-3-1) FATIGUE DESIGN3.1D (CS-4-1) INTERACTION AND FLAW MODELING FOR MULTIPLE

FLAWS3.1E (MF-4-8) IMPACT OF RESIDUAL FIELDS ON COMPONENT LIFE3.1F (CS-28-1) NDE PERSONNEL QUALIFICATION (PQ) I3.1G (DA-4-1) INELASTIC, NONLINEAR AND LIMIT LOAD ANALYSIS3.1H (HT-4-1) NDE AND FITNESS FOR SERVICE OF HIGH PRESSURE

VESSELS3.1I (SE-6-5) SPECIAL SESSION I [DEVELOPMENT OF AN EVALUATION

METHOD FOR SEISMIC ISOLATION SYSTEMS OF NU-CLEAR POWER FACILITIES]

3.1J (DA-2-3) DESIGN & ANALYSIS OF PIPING & COMPONENTS III3.1K (OAC-8-1) PLANT LIFE EXTENSION: AGING AND LIFE MANAGEMENT3.1L (DA-10-1) EXTREME LOADING CONSIDERATIONS FOR BOLTED

JOINT DESIGN AND OPERATION3.1M (DA-8-2) FITNESS FOR SERVICE EVALUATIONS & POST CON-

STRUCTION ISSUES 23.1N (FSI-3-8) CFD TECHNIQUES IN FSI/FIV I3.1O (DA-7-1) THERMAL STRESSES & ELEVATED TEMPERATURE DE-

SIGN 1Block 3.2: Wednesday, July 23, 2014 (10:30 am – 12:15 pm)3.2A (MF-2-1) APPLICATION OF FRACTURE MECHANICS IN FAILURE AS-

SESSMENT—I 3.2B (CS-21-1) FATIGUE MONITORING AND RELATED ASSESSMENT

METHODS I3.2C (DA-3-2) COMPLEX FATIGUE LOADINGS3.2D (CS-27-1) INTERNATIONAL SESSION FOR FAST REACTOR DESIGN

15

AND CONSTRUCTION3.2F (CS-28-2) PANEL SESSION: NDE PERSONNEL QUALIFICATION (PQ)

II3.2G (DA-4-2) NONLINEAR CYCLIC ANALYSIS, SHAKEDOWN, AND

RATCHETING3.2H (HT-5-1) DESIGN AND ANALYSIS OF HIGH-PRESSURE EQUIPMENT

FOR THE OIL & GAS EXPLORATION AND PRODUCTION3.2I (SE-6-6) SPECIAL SESSION II [DEVELOPMENT OF AN EVALUATION

METHOD FOR SEISMIC ISOLATION SYSTEMS OF NU-CLEAR POWER FACILITIES]

3.2K (MF-17-1) PROBABILISTIC ASSESSMENT OF FAILURE3.2L (DA-10-3) BOLTED JOINT ASSEMBLY AND OPERATION CONSIDERA-

TIONS3.2M (DA-8-3) FITNESS FOR SERVICE EVALUATIONS & POST CON-

STRUCTION ISSUES 33.2N (FSI-3-9) AEROELASTICITY / AERODYNAMICS & ENERGY HARVEST-

ING3.2O (DA-7-2) THERMAL STRESSES & ELEVATED TEMPERATURE DE-

SIGN 2

Thursday, July 24, 2014

Block 4.1: Thursday, July 24, 2014 (8:30 am – 10:15 am)4.1A (MF-2-2) APPLICATION OF FRACTURE MECHANICS IN FAILURE AS-

SESSMENT—II4.1C (DA-3-3) FATIGUE CRACK GROWTH4.1D (CS-10-1) RECENT DEVELOPMENTS IN JAPANESE CODES AND

STANDARDS—I4.1E (SE-6-1) BASE ISOLATION AND STRUCTURAL CONTROL TECHNOL-

OGY—I4.1F (SE-2-1) STRUCTURAL DYNAMICS—LINEAR AND NONLINEAR4.1G (CT-14-1) LIMIT ANALYSIS, ELASTIC-PLASTIC ANALYSIS AND RE-

LATED TOPICS4.1H (MF-3-1) MATERIALS FOR HYDROGEN SERVICE—I4.1I (CS-11-1) EXTREME PRESSURE EQUIPMENT4.1J (MF-18-1) ASSESSMENT METHODS AND MICROSTRUCTURE EVO-

LUTION4.1K (FSI-3-10) FLOW-SOUND AND FLUID-STRUCTURE-ACOUSTICAL IN-

TERACTIONS I4.1L (OAC-4-1) THERMAL EVALUATION4.1M (MF-6-1) FITNESS FOR SERVICE AND FAILURE ASSESSMENT—I4.1N (FSI-3-14) TURBULENCE-INDUCED VIBRATION AND NOISE4.1O (NDE-1-1) NDE ENGINEERINGBlock 4.2: Thursday, July 24, 2014 (10:30 am – 12:15 pm)4.2A (MF-2-3) APPLICATION OF FRACTURE MECHANICS IN FAILURE AS-

SESSMENT—III4.2D (CS-10-2) RECENT DEVELOPMENTS IN JAPANESE CODES AND

STANDARDS—II4.2E (SE-6-2) BASE ISOLATION AND STRUCTURAL CONTROL TECHNOL-

OGY—II4.2F (SE-7-1) SEISMIC RESPONSE MITIGATION FOR MECHANICAL

STRUCTURES AND ENERGY FACILITIES4.2G (CT-12-1) EXPLICIT AND IMPLICIT NONLINEAR FINITE ELEMENT

ANALYSIS4.2H (MF-3-2) MATERIALS FOR HYDROGEN SERVICE—II4.2I (CS-11-2) INTEGRITY MANAGEMENT USING ACOUSTIC EMISSION4.2J (SE-10-1) RISK ASSESSMENT OF COMPONENTS AND INDUSTRIAL

FACILITIES4.2K (FSI-3-11) FLOW-SOUND AND FLUID-STRUCTURE-ACOUSTICAL IN-

TERACTIONS II4.2L (OAC-4-2) REGULATIONS, CODES AND STANDARDS4.2M (MF-6-2) FITNESS FOR SERVICE AND FAILURE ASSESSMENT—II4.2N (FSI-3-15) FSI AND FIV INVOLVING MULTI-PHASE FLOWS4.2O (NDE-4-1) RECENT DEVELOPMENTS IN NDE ENGINEERING

Block 4.3: Thursday, July 24, 2014 (2:00 pm – 3:45 pm)4.3A (MF-2-4) APPLICATION OF FRACTURE MECHANICS IN FAILURE AS-

SESSMENT—IV4.3E (SE-6-3) BASE ISOLATION AND STRUCTURAL CONTROL TECHNOL-

OGY—III4.3F (SE-13-3) SEISMIC ANALYSIS AND DESIGN OF PIPING SYSTEMS—III4.3G (FSI-2-1) FLUID TRANSIENT ANALYSIS4.3H (MF-3-3) MATERIALS FOR HYDROGEN SERVICE—III4.3I (CS-11-4) EXAMPLE OF ENGINEERING FAILURE ANALYSIS IN CHINA4.3K (FSI-3-12) FLOW-SOUND AND FLUID-STRUCTURE-ACOUSTICAL IN-

TERACTIONS III4.3L (DA-17-1) ACOUSTIC INDUCED VIBRATION IN PIPING SYSTEMS4.3M (MF-11-1) MODELLING AND APPLICATION4.3N (FSI-3-16) AXIAL FLOW FSI I4.3O (NDE-5-1) CORROSION DETECTION AND CHARACTERIZATIONBlock 4.4: Thursday, July 24, 2014 (4:00 pm – 5:45 pm)4.4A (MF-2-5) APPLICATION OF FRACTURE MECHANICS IN FAILURE AS-

SESSMENT-V4.4E (SE-5-1) SEISMIC RESPONSE AND DESIGN OF STORAGE TANKS,

PIPING AND OTHER COMPONENTS—I4.4H (MF-3-4) MATERIALS FOR HYDROGEN SERVICE—IV4.4I (CS-11-5) STRUCTURAL INTEGRITY OF CHINESE PRESSURE EQUIP-

MENT4.4K (FSI-3-13) FLOW-SOUND AND FLUID-STRUCTURE-ACOUSTICAL IN-

TERACTIONS IV4.4L (DA-17-2) ACOUSTIC INDUCED VIBRATION IN PIPING SYSTEMS II4.4M (MF-11-2) DAMAGE AND EVOLUTION4.4N (FSI-3-17) AXIAL FLOW FSI II

16

SUNDAY, JULY 20, 2014

no textBlock 0.1: Sunday, July 20 (9:00 am – 11:30 am)

no textSESSION 0.1Q (TW-1-6)Sunday, July 20, 9:00 am – 11:30 am, North Tower, Pacific RoomWORKSHOP 1: MICROWAVE NDE TECHNIQUES FOR RUBBER EXPANSIONJOINTS AND HDPE BUTT FUSIONS IN POWER PLANTSSponsored by ILD/Evisive, Inc.Developed by: M. Y. A. Younan, The American University in Cairo, New Cairo,

EgyptChair: M. Y. A. Younan, The American University in Cairo, New Cairo,

EgyptPresented by: R. Stakenborghs, ILD/Evisive, Inc.

no textBlock 0.2: Sunday, July 20 (1:00 pm – 3:30 pm)

no textSESSION 0.2Q (TW-1-4)Sunday, July 20, 1:00 pm – 3:30 pm, North Tower, Pacific RoomSPECIAL TUTORIAL 1: ENGINEERING ETHICSDeveloped by: M. Y. A. Younan, The American University in Cairo, New Cairo,


EgyptPresented by: R. Switzer, The American University in Cairo

no textBlock 0.3: Sunday, July 20 (4:00 pm – 6:00 pm)

no textSESSION 0.3Q (TW-1-5)Sunday, July 20, 4:00 pm – 6:00 pm, North Tower, Pacific RoomSPECIAL TUTORIAL 2: BENEFITS OF ASME CODES AND STANDARDSDeveloped by: M. Y. A. Younan, The American University in Cairo, New Cairo,


EgyptPresented by: W. Bees, Consulting Engineer, M. Rana, Praxair, Inc.

MONDAY, JULY 21, 2014no text

Block 1.1: Monday, July 21 (8:30 am – 10:15 am)no text

SESSION 1.1A (MF-15-1)Monday, July 21, 8:30 am – 10:15 am, South Tower, Terrace Room E+FCOMPOSITE PRESSURE VESSELSSymposium on Plastics and Composites—Co-Sponsored by Design &Analysis, and Materials & Fabrication Technical CommitteesDeveloped by: H. Faria, INEGI, Porto, PortugalCo-Chair: N. O’Dowd, University of Limerick, Limerick, IrelandChair: P. Mertiny, University of Alberta, Edmonton, AB, CanadaPVP2014-28168: THE RESIDUAL STRENGTH OF BREATHING AIR COMPOS-ITE CYLINDERS TOWARDS THE END OF THEIR SERVICE LIFE—A FIRSTASSESSMENT OF A REAL-LIFE SAMPLEG. W. Mair, F. M. Scherer, I. Scholz, T. Schönfelder, BAM (Federal Institute of Ma-terials Research and Testing), Berlin, GermanyPVP2014-28420: BRAIDING—A NEW PRODUCTION METHOD APPROACHFOR COMPOSITE PRESSURE VESSELS IN AUTOMOTIVE APPLICATIONSM. Lengersdorf, Institut für Textiltechnik (ITA) of RWTH Aachen University, Aachen,Germany; J. Multhoff, ISATEC Gmbh, Aachen, Germany; T. Gries, Institut für Tex-tiltechnik (ITA) of RWTH Aachen University, Aachen, GermanyPVP2014-29066: FILAMENT WOUND TOROIDAL PRESSURE VESSELS WITHVARIABLE SLIPPAGE COEFFICIENTS ALONG THE FIBER TRAJECTORIESL. Zu, J. Wang, S. Li, Wuhan University of Technology, Wuhan, Hubei, ChinaPVP2014-28027: NUMERICAL ANALYSIS OF THE LOAD SHARING ABILITYOF THE LINER IN TYPE III COMPOSITE OVERWRAPPED PRESSURE VES-SELSJ. H. S. Almeida Junior, Universidade Federal do Rio Grande do Sul, Porto Alegre,Brazil; H. Faria, INEGI, Porto, Portugal; A. T. Marques, University of Porto, Porto,Portugal; S. Amico, Universidade Federal do Rio Grande do Sul, Porto Alegre,BrazilPVP2014-28734: CIRCULAR BRAIDING PROCESS SIMULATION FOR APRESSURE VESSELJ. van Ravenhorst, R. Akkerman, University of Twente, Enschede, NetherlandsSESSION 1.1B (SPC-2-1)Monday, July 21, 8:30 am – 10:15 am, South Tower, Royal Ballroom ASTUDENT PAPER SYMPOSIUM 1Developed by: Y. Kwon, Naval Postgraduate School, Monterey, CA, USA; R. S.

Hafner, Lawrence Livermore National Laboratory, Livermore, CA,USA

Chair: S. Iyer, Candu Energy, Mississauga, ON, CanadaCo-Chair: S. Leen, NUI Galway, Galway, IrelandPVP2014-28326: RATCHET ANALYSIS OF STRUCTURES UNDER A GENER-ALISED CYCLIC LOAD HISTORYM. Lytwyn, H. Chen, University of Strathclyde, Glasgow, United Kingdom; M. Mar-tin, Rolls-Royce, Derbyshire, United KingdomPVP2014-28108: TIGHTENING PROCEDURES FOR BOLTED JOINTS WITHMETAL-TO-METAL CONTACT TYPE GASKETSK. Ma, K. Guan, L. Zhang, East China University of Science and Technology,Shanghai, ChinaPVP2014-28065; INFLUENCE OF EXCITATION ON JUNCTION COUPLING ATWATER HAMMER IN PIPING SYSTEMSS. Riedelmeier, S. Becker, E. Schlücker, University Erlangen-Nuremberg, Erlan-gen, GermanyPVP2014-28053: EXPERIMENTAL AND NUMERICAL ANALYSIS FOR FLUID-STRUCTURE INTERACTION IN AN ENCLOSED HEXAGONAL ASSEMBLYL. Sargentini, B. Cariteau, CEA Saclay, Gif-sur-Yvette, France; M. Angelucci, Uni-versity of Pisa, Pisa, ItalySESSION 1.1C (CS-8-1)Monday, July 21, 8:30 am – 10:15 am, South Tower, Terrace Room A+BASME SC III C&S ACTIVITIES FOR HTRSDeveloped by: T.-L. Sham, Oak Ridge National Laboratory, Oak Ridge, TN,

USA; R. Barnes, ANRIC, Etobicoke, ON, CanadaChair: T.-L. Sham, Oak Ridge National Laboratory, Oak Ridge, TN, USA

DAILY SESSION LISTINGSessions are arranged in Session Blocks in the format X.YZ, where: X indicates the Day, Y indicates the Session Block, and Z indicates the Conference Session Room.Conference Session Rooms are as follows: A = Terrace E+F (South Tower); B = Royal Ballroom A (South Tower); C = Terrace A+B (South Tower); D = Regal (SouthTower); E = Imperial (South Tower); F = Terrace C+D (South Tower); G = Grand Ballroom E (North Tower); H = Grand Ballroom G (North Tower); I = Royal Ballroom E+F(South Tower); J = Garden 1 (North Tower); K = Garden 2 (North Tower); L = Royal Ballroom D (South Tower); M = Royal Ballroom C (South Tower); N = Grand BallroomF (North Tower); O = Royal Ballroom B (South Tower); P = Not Used; Q = Pacific (North Tower); R = Not Used; S = Royal Ballroom Foyer (South Tower); T = Not Used.The parenthetical designations are the Technical Committee session references.

The Technical Committee acronyms used are shown below: • CS = Codes & Standards • CT = Computer Technology & Bolted Joints • DA = Design & Analysis • FSI = Fluid–Structure Interaction • HT = High Pressure Technology • MF = Materials & Fabrication • NDE = ASME Nondestructive Evaluation Division • OAC = Operations, Applications, and Components • SE = Seismic Engineering • SPC = Rudy Scavuzzo Student Paper Symposium & Student Paper

Competition • TW = Technical Tutorials and Workshops

Note: Unless specifically listed in the individual sessions below, all sessionsare sponsored by the indicated Technical Committee.

17

Co-Chair: R. Barnes, ANRIC, Etobicoke, ON, CanadaPVP2014-28412: IMPROVING CREEP-FATIGUE DESIGN METHODOLOGYFOR ADVANCED FERRITIC-MARTENSITIC STEELSM. Li, W. Soppet, S. Majumdar, K. Natesan, Argonne National Laboratory, Ar-gonne, IL, USAPVP2014-28352: VERIFICATION OF ELASTIC-PERFECTLY PLASTIC METH-ODS FOR EVALUATION OF STRAIN LIMITS—ANALYTICAL AND TEST COM-PARISONSP. Carter, Stress Engineering Services, Mason, OH, USA; T.-L. Sham, Oak RidgeNational Laboratory, Oak Ridge, TN, USA; R. Jetter, RI Jetter Consulting, PebbleBeach, CA, USAPVP2014-28444: THERMAL RATCHETING TEST RESULTS FOR ALLOY 617AT 950CY. Wang, T.-L. Sham, Oak Ridge National Laboratory, Oak Ridge, TN, USA; R.Jetter, RI Jetter Consulting, Pebble Beach, CA, USASESSION 1.1D (FSI-4-1)Monday, July 21, 8:30 am – 10:15 am, South Tower, Regal Room18TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGY FORFLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS—INDUS-TRIAL AND AERONAUTICAL APPLICATIONSDeveloped by: C. G. Giannopapa, ESA, Paris, France; M. Benaouicha, French

National Center for Scientific Research, Clamart, France; H.Iyama, Kumamoto National College of Technology, Yatsushiro-gun, Kumamoto, Japan; J. Hall, University of New Brunswick,Fredericton, NB, Canada

Chair: C. G. Giannopapa, ESA, Paris, FranceCo-Chair: M. Benaouicha, French National Center for Scientific Research,

Clamart, FrancePVP2014-28316: FLOW AROUND A LEADING-EDGE SLAT (PART I); TURBU-LENT FLOW STATISTICSP. Richard, S. Wilkins, J. Hall, University of New Brunswick, Fredericton, NB,CanadaPVP2014-28315: FLOW AROUND A LEADING EDGE SLAT (PART II): COVEFLOW DYNAMICS VIA SNAPSHOT PODS. Wilkins, P. Richard, J. Hall, University of New Brunswick, Fredericton, NB,CanadaPVP2014-28974: PRESSURE MEASUREMENTS COMPARISON USINGTRANSDUCERS DURING VERTICAL SLAMMING TESTA. El Malki Alaoui, A. Neme, ENSTA Bretagne, Brest, FrancePVP2014-28348: SMOOTHED PARTICLE HYDRODYNAMICS FOR HYPERVE-LOCITY IMPACTS INTO INHOMOGENEOUS MATERIALSI. Zisis, B. van der Linden, C. Giannopapa, J. Dam, Eindhoven University of Tech-nology, Eindhoven, NetherlandsSESSION 1.1E (MF-4-1)Monday, July 21, 8:30 am – 10:15 am, South Tower, Imperial Room3D SIMULATIONSDeveloped by: E. Keim, AREVA, Erlangen, Germany; D. Rudland, US Nuclear

Regulatory Commission, Frederick, MD, USAChair: E. Keim, AREVA, Erlangen, GermanyCo-Chair: D. Rudland, US Nuclear Regulatory Commission, Frederick, MD,

USAPVP2014-28151: 3D SIMULATION OF A PERIPHERAL ADAPTER J-GROOVEATTACHMENT WELD IN A VESSEL HEADP. Mourgue, ESI-France, Lyon, France; P. Gilles, AREVA, Paris la Defense,France; V. Robin, AREVA NP, Lyon, France; A. Brosse, S. Gallee, ESI-France,Lyon, FrancePVP2014-28717: THREE DIMENSIONAL RESIDUAL STRESS IN DISSIMILARMETAL WELDS INCLUDING PART REPAIR AND START/STOP EFFECTS (Pre-sentation Only)F. Brust, E. Kurth, E. Punch, Engineering Mechanics Corporation of Columbus,Columbus, OH, USAPVP2014-28776: EVALUATION OF RESIDUAL STRESSES IN SMALL DIAM-ETER STAINLESS STEEL PIPE WELDS BY TWO-DIMENSIONAL ANDTHREE-DIMENSIONAL FINITE ELEMENT ANALYSESF. Ku, Structural Integrity Associates, San Jose, CA, USA; T. Hicks, J. Miller, W.Mabe, Bechtel Marine Propulsion Corporation, West Mifflin, PA, USAPVP2014-28488: RESIDUAL STRESSES IN FRICTION STIR WELDED TUBE-TUBESHEET JOINTF. Al-Badour, N. Merah, A. Shuaib, A. Bazoune, King Fahd University of Petroleumand Minerals, Dhahran, Saudi ArabiaSESSION 1.1F (MF-5-1)Monday, July 21, 8:30 am – 10:15 am, South Tower, Terrace Room C+DEUROPEAN PROGRAMS IN STRUCTURAL INTEGRITY IDeveloped by: T. Nicak, AREVA GmbH, Erlangen, Germany; P. James, AMEC,

Risley, United Kingdom; E. Keim, AREVA, Erlangen, Germany;D. Moinereau, Electricite de France, Moret sur Loing, France

Chair: P. James, AMEC, Warrington, United KingdomCo-Chair: E. Keim, AREVA, Erlangen, GermanyPVP2014-28077: STYLE PROJECT: A LARGE SCALE DUCTILE TEARING EX-PERIMENT ON A CLADDED FERRITIC PIPED. Moinereau, P. Le Delliou, Electricite de France, Moret sur Loing, France; E.Keim, T. Nicak, AREVA GmbH, Erlangen, GermanyPVP2014-28101: STYLE PROJECT: ASSESSMENT OF TRANSFERABILITYOF FRACTURE MATERIAL PROPERTIES FROM SPECIMENS TO LARGECOMPONENTS BY LOCAL APPROACH TO FRACTUREP. Le Delliou, D. Moinereau, Electricite de France, Moret sur Loing, France; E.Keim, T. Nicak, AREVA GmbH, Erlangen, GermanyPVP2014-28296: PROJECT STYLE: POST-TEST ANALYSIS OF MOCK-UP3T. Nicak, E. Keim, H. Schendzielorz, G. Meier, AREVA GmbH, Erlangen, Germany;D. Moinereau, Electricite de France, Moret sur Loing, FrancePVP2014-28321: FOUR POINTS BENDING TEST ON AN EPR TYPE DMWPIPE CONTAINING A THROUGH-WALL DEFECT: EXPERIMENTAL AND NU-MERICAL ANALYSIS FROM SMALL SPECIMENS UNTIL PIPE SCALEM. Bourgeois, CEA, Gif sur Yvette, France; S. Chapuliot, AREVA, Paris LaDéfense, France; S. Marie, Y. Kayser, O. Ancelet, CEA, Gif sur Yvette, FranceSESSION 1.1G (DA-1-1)Monday, July 21, 8:30 am – 10:15 am, North Tower, Grand Ballroom EDESIGN AND ANALYSIS OF PRESSURE VESSELS AND COMPONENTSDeveloped by: C. Rodery, BP p.l.c., League City, TX, USA; M. Zhao, Chevron,

Houston, TX, USA; R. Frith, FE Consultants, Newstead, QLD,Australia

Chair: J. Boyle, University of Strathclyde, Glasgow, United KingdomCo-Chair: M. Zhao, Chevron, Houston, TX, USAPVP2014-28122: DESIGN OF AN UNDERWATER TOWFISH USING DESIGNBY RULE AND DESIGN BY ANALYSISM. Muscat, M. Formosa, G. A. Salgado Martin, University of Malta, Msida, Malta;R. Sinatra, A. Cammarata, University of Catania, Catania, ItalyPVP2014-28075: ASSESSMENT OF WEEP HOLES IN CYLINDRICAL SHELLBASED ON ELASTIC-PLASTIC STRESS ANALYSIS METHODS. K. Nawandar, Fluor Daniel India Pvt. Ltd., New Delhi, India; D. Chandiramani,LR Insurance, Inc., Mumbai, IndiaPVP2014-28182: GLOBAL ANALYSIS OF SHELL KEY GASIFICATION EQUIP-MENT BASED ON FINITE ELEMENT METHODJ. Shen, Wison Engineering Co. Ltd., Shanghai, Shanghai, ChinaPVP2014-28960; THE ASSESSMENT FOR A NEW PRESSURE-RELIEFSTRUCTURE IN NON-REFILLABLE STEEL WELDED INDUSTRY CYLINDERW. Jin, Y. Li, Z. Gao, Zhejiang University of Technology, Hangzhou, ChinaSESSION 1.1H (HT-1-1)Monday, July 21, 8:30 am – 10:15 am, North Tower, Grand Ballroom GDESIGN, ANALYSIS, AND LIFE PREDICTION OF HIGH-PRESSURE VESSELSDeveloped by: R. Dixon, Structural Integrity, Huntersville, NC, USA; M. Aggar-

wal, Gannon University, Erie, PA, USAChair: R. Dixon, Structural Integrity, Huntersville, NC, USACo-Chair: K. Subramanian, Stress Engineering Services, Inc., Metairie, LA,

USAPVP2014-28002: SELECTING MATERIAL PROPERTIES FOR MAXIMIZINGGUN FIRING POWERJ. Perry, M. Perl, Ben Gurion University of The Negev, Beer Sheva, IsraelPVP2014-28252: LEAKAGE ANALYSIS OF A HIGH PRESSURE FLANGECONNECTION UNDER BENDING MOMENTS—AN ANALYTIC PROCEDUREM. Bortz, R. Wink, Uhde High Pressure Technologies GmbH, Hagen, GermanyPVP2014-28978: APPLICATION OF COMPOSITE MATERIALS IN HIGH PRES-SURE TECHNOLOGYH. Torab, M. Aggarwal, Gannon University, Erie, PA, USASESSION 1.1I (DA-13-2)Monday, July 21, 8:30 am – 10:15 am, South Tower, Royal Ballroom E+FFRACTURE 2Developed by: S. Finneran, Det Norske Veritas (U.S.A.), Inc., Hilliard, OH, USAChair: R. Cordes, Stress Engineering Services, Inc., Houston, TX, USACo-Chair: S. Finneran, Det Norske Veritas (U.S.A.), Inc., Hilliard, OH, USA;

D. Bosko, Intertek AIM, Sunnyvale, CA, USAPVP2014-28171: METHODOLOGY FOR ASSESSMENT OF SURFACE DE-FECTS IN UNDERMATCHED PIPELINE GIRTH WELDSA. Pepin, T. Tkaczyk, Technip, Aberdeen, United Kingdom; N. O’Dowd, Universityof Limerick, Limerick, Ireland; K. Nikbin, Imperial College, London, United King-domPVP2014-28407: EVALUATION OF FRACTURE TOUGHNESS BEHAVIOR OFPOLYETHYLENE PIPE MATERIALST. Ali El-Bagory, Helwan University, Cairo, Egypt; H. Sallam, Jazan University,Cairo, Egypt; M. Y. A. Younan, The American University in Cairo, New Cairo, EgyptPVP2014-28422: CLEAVAGE CRACK PROPAGATION AND ARREST PREDIC-TION IN FRENCH PWR VESSEL STEEL

18

X. Yang, S. Marie, CEA, Gif sur Yvette, France; P. Bompard, ECP, Chatenay-Mal-abry, France; C. Jacquemoud, CEA, Gif sur Yvette, FrancePVP2014-28557: BRITTLE FRACTURE PROBABILISTIC ASSESSMENT OFWWER-1000 RPVSM. Zarazovskii, I. Orynyak, A. Batura, M. Borodii, E. Danil’chuk, IPP-Centre Ltd.,Kyiv, UkrainePVP2014-28749: FINITE ELEMENT SIMULATION OF A CIRCUMFERENTIALTHROUGH-THICKNESS CRACK IN A CYLINDERS. Arun, A. H. Sherry, M. C. Smith, M. Sheikh, The University of Manchester, Man-chester, Greater Manchester, United KingdomSESSION 1.1J (CS-19-1)Monday, July 21, 8:30 am – 10:15 am, North Tower, Garden Room 1INTEGRITY OF CAST STAINLESS STEEL PIPEDeveloped by: T. J. Griesbach, Structural Integrity Associates, Inc., San Jose,

CA, USA; K. Hojo, Mitsubishi Heavy Industries, Inc., Kobe, JapanChair: T. J. Griesbach, Structural Integrity Associates, Inc., San Jose,

CA, USACo-Chair: K. Hojo, Mitsubishi Heavy Industries, Inc., Kobe, JapanPVP2014-28089: THE INFLUENCE OF FLOW STRENGTH AND FRACTURETOUGHNESS ON THE COMPUTED RELIABILITY OF THERMALLY AGEDGRADE CF-8M CAST AUSTENITIC STAINLESS STEEL PIPINGT. J. Griesbach, D. O. Harris, D. Dedhia, A. Alleshwaram, N. Cofie, Structural In-tegrity Associates, Inc., San Jose, CA, USAPVP2014-28233: A METHOD TO QUANTIFY THERMAL AGING EFFECT ONFRACTURE TOUGHNESS OF CAST STAINLESS STEELS USING SMALLPUNCH TESTJ.-Y. Jeon, D.-I. Ryu, Y. Kim, Korea University, Seoul, Korea (Republic); M.-Y. Lee,J. W. Kim, Chosun University, Gwang-ju, Korea (Republic)PVP2014-28436: NUCLEAR REGULATORY COMMISSION STAFF VIEW OFPROGRESS IN THE NONDESTRUCTIVE TESTING OF CAST AUSTENITICSTEEL COMPONENTSS. Cumblidge, Nuclear Regulatory Commission, Bethesda, MD, USAPVP2014-28745: ULTRASONIC SOUND FIELD MAPPING THROUGHCOARSE GRAINED CAST AUSTENITIC STAINLESS STEEL COMPONENTSS. L. Crawford, M. S. Prowant, A. D. Cinson, M. R. Larche, A. Diaz, Pacific North-west National Laboratory, Richland, WA, USASESSION 1.1K (OAC-6-1)Monday, July 21, 8:30 am – 10:15 am, North Tower, Garden Room 2CONTINUED SAFE OPERATION OF EXISTING ASSETSDeveloped by: A. Cheta, Shell, Houston, TX, USA; Y. Shoji, Samsung C&T Corp,

Seoul, Korea (Republic)Chair: A. Cheta, Shell, Houston, TX, USACo-Chair: Y. Shoji, Samsung C&T Corp, Seoul, Korea (Republic)PVP2014-28334: SURGE TANK DESIGN AND SAFETY CRITERIA FOR UN-DERGROUND PUMPING STATIONS (PRESENTATION ONLY)S. Gerges, County Sanitation Dist of LA, Whittier, CA, USAPVP2014-28948: FURTHER DEVELOPMENTS TO THE CHANGE GASKETS. Bond, E. Jamalyaria, Flexitallic LP, Deer Park, TX, USAPVP2014-28034: ENERGY SAVING FOR A CHINESE CRUDE OIL PIPELINEY. Yu, C. Wu, X. Xing, L. Zuo, China University of Petroleum at Beijing, Beijing,ChinaSESSION 1.1L (CT-2-1)Monday, July 21, 8:30 am – 10:15 am, South Tower, Royal Ballroom DDESIGN AND ANALYSIS OF BOLTED FLANGE JOINTSSymposium on Bolting and Bolted Joints—Co-Sponsored by ComputerTechnology and Bolted Joints, and Design & Analysis Technical Commit-teesDeveloped by: T. Sawa, Hiroshima University, Higashi-hiroshima City, Japan; H.

Bouzid, École de technologie supérieure, Montréal, QC, CanadaChair: T. Sawa, Hiroshima University, Higashi-hiroshima City, JapanCo-Chair: H. Bouzid, École de technologie supérieure, Montréal, QC,

CanadaPVP2014-28167: ACCOUNT FOR METAL TO METAL CONTACT BETWEENGASKET CENTERING RING AND FLANGE FACING IN CALCULATION USINGTHE XP CEN\TS 1591-3 METHOD: COMPARISON WITH OTHER ANALYTICALMETHOD AND FINITE ELEMENTS ANALYSISH. Lejeune, Y. Ton That, CETIM, Nantes, FrancePVP2014-28731: FEM STRESS ANALYSIS AND SEALING PERFORMANCEEVALUATION IN BOLTED FLANGE CONNECTIONS WITH METAL FLAT GAS-KET SUBJECTED TO BENDING MOMENT AND INTERNAL PRESSUREK. Kondo, Shinko Plantech Co. Ltd., Yokohama, Japan; S. Tsubaki, MitsubishiHeavy Industries, Ltd., Hiroshima, Japan; Y. Omiya, T. Sawa, Hiroshima University,Higashi-hiroshima City, JapanPVP2014-28771; QUALIFICATION PROTOCOL FOR INTERMEDIATE BULKCONTAINER SERVICES

K. R. Grant, T. Lokey, VSP Technologies, Prince George, VA, USAPVP2014-28094: VALVE PACKING RESEARCH AND DEVELOPMENT EQUIP-MENTSJ. Veiga, C. Barroso, Teadit Industria e Comercio Ltda, Rio de Janeiro, RJ, Brazil;J. Baulch, Teadit NA, Pasadena, TX, USA; G. M. da Silva, Teadit Industria e Com-ercio Ltda, Rio de Janeiro, RJ, BrazilSESSION 1.1M (SE-1-1)Monday, July 21, 8:30 am – 10:15 am, South Tower, Royal Ballroom CSEISMIC SAFETY MARGIN STUDIES OF OPERATING PLANTS (INTERNA-TIONAL TOPICS)Developed by: T. Taniguchi, Tottori University, Tottori, Japan; C.-S. Tsai, Feng

Chia University, Taichung, Taiwan; S. Karamanos, University ofThessaly, Volos, Greece; G. Slagis, G C Slagis Associates, Ro-seville, CA, USA

Chair: F. Paolacci, University Roma TRe, Rome, ItalyCo-Chair: K. Kerkhof, Material Testing Institute, University of Stuttgart,

Stuttgart, GermanyPVP2014-28644: STUDY ON THE SEISMIC RELIABILITY OF LOW SEISMICCLASS EQUIPMENT BASED ON DAMAGE DATA OF NUCLEAR POWERPLANTSR. Morita, F. Inada, Central Research Institute of Electric Power Industry, Komae-shi, Tokyo, Japan; Y. Ohtori, Central Research Institute of Electric Power Industry,Abiko, Chiba, Japan; M. Nanpo, Hokkaido Electric Power Company, Hokkaido,Japan; K. Naradate, Tohoku Electric Power Company, Miyagi, JapanPVP2014-28842: USE SEISMIC MARGINS METHODS BEYOND SMA (Presen-tation Only)R. Cushing, K. Merz, Simpson Gumpertz and Heger, Newport Beach, CA, USA;J. Lundwall, Ringhals A.B., Väröbacka, SwedenPVP2014-28937: PROBABILISTIC SEISMIC HAZARD ASSESSMENT INCOUNTRIES WITH LOW SEISMICITYK. Demjancukova, UJV Rez, Husinec - Rez, Czech Republic; D. Prochazkova,Czech Technical University in Praha, Praha, Czech RepublicPVP2014-29080: SEISMIC ANALYSIS OF ABOVE GROUND PIPING INPROCESS PLANTG. Bhende, Worley Parsons, Mumbai, IndiaPVP2014-28250: EXPERIMENTAL STUDY OF ALL-STEEL BUCKLING RE-STRAINED BRACE WITH WINDOWED LATERAL SUPPORT ELEMENTSC.-S. Tsai, Y.-M. Wang, Feng Chia University, Taichung, TaiwanSESSION 1.1N (FSI-3-1)Monday, July 21, 8:30 am – 10:15 am, North Tower, Grand Ballroom FBLUFF-BODY/NEAR WAKE INTERACTIONS IDeveloped by: D. Rockwell, Lehigh, Bethlehem, PA, USA; K. Hourigan, Monash

University, Clayton, Victoria, AustraliaChair: H. Goyder, Cranfield University, Shrivenham, United KingdomCo-Chair: P. Oshkai, University of Victoria, Victoria, BC, CanadaPVP2014-28055: FLOW AROUND A SURFACE-MOUNTED FINITE SQUAREPRISM WITH A SPLITTER PLATEA. Ogunremi, D. Sumner, University of Saskatchewan, Saskatoon, SK, CanadaPVP2014-28287: EFFECT OF DISSIMILAR LEADING EDGES ON THE FLOWSTRUCTURES AROUND A SQUARE CYLINDERA. K. Nair, R. A. Kumar, H. C. Many, Amrita University, Kollam, IndiaPVP2014-28086: FLOW-INDUCED VIBRATION OF A CYLINDER IN THE WAKEOF ANOTHER OF SMALLER DIAMETERM. M. Alam, A. Ran, Y. Zhou, Harbin Institute of Technology, Shenzhen, ChinaPVP2014-28218: EFFECT OF ASPECT RATIO ON THE FLOW FIELD ABOVETHE FREE END OF A FINITE CIRCULAR CYLINDERN. Rostamy, Enbridge, Edmonton, AB, Canada; D. Sumner, D. Bergstrom, J. D.Bugg, University of Saskatchewan, Saskatoon, SK, CanadaSESSION 1.1O (MF-19-1)Monday, July 21, 8:30 am – 10:15 am, South Tower, Royal Ballroom BCREEP DAMAGE AND FAILURE PREDICTIONSymposium on Elevated Temperature and Creep—Co-Sponsored by Design& Analysis, Materials & Fabrication, and Codes & Standards Technical Com-mitteesDeveloper: C. M. Davies, Imperial College London, London, United Kingdom;

R. Dennis, Frazer-Nash, Bristol, United KingdomChair: C. M. Davies, Imperial College London, London, United KingdomCo-Chair: M. Yatomi, IHI, Yokohama, Japan; R. Dennis, Frazer-Nash, Bris-

tol, United KingdomPVP2014-28641: STUDY OF CREEP CAVITATION IN A STAINLESS STEELWELDMENT USING SMALL ANGLE NEUTRON SCATTERING AND SCAN-NING ELECTRON MICROSCOPYH. Jazaeri, P. J. Bouchard, M. T. Hutchings, The Open University, Milton Keynes,United Kingdom; P. Lindner, Institut Laue-Langevin, Grenoble, FrancePVP2014-28679: A PHYSICALLY BASED DAMAGE CONSTITUTIVE MODELFOR STRESS RELAXATION

19

Y. Zhou, X. Chen, Z. Fan, Y. Han, Hefei General Machinery Research Institute,Hefei, ChinaPVP2014-29076: MICROSTRUCTURE AND CREEP PROPERTY OF LONG-TERM SERVICED MOD.9CR-1MO STEELS AFTER REPAIR WELDINGK. Kubushiro, IHI Corporation, Yokohama, Japan; N. Saito, H. Nakagawa, IHI Cor-poration, Tokyo, Japan; K. Sawada, K. Kimura, National Institute for Materials Sci-ence, Tsukuba, Ibaraki, JapanPVP2014-28020: AN INTEGRATED CREEP MODEL BASED ON INTERNALSTRESS EVOLUTIONN. Bonora, L. Esposito, University of Cassino and Southern Lazio, Cassino, ItalySESSION 1.1S (MF-26-1)Monday, July 21, 8:30 am – 10:15 am, South Tower, Royal Ballroom FoyerNDE DEMONSTRATION FORUM—IDeveloped by: C. Jaske, Det Norske Veritas (U.S.A.), Inc., Dublin, OH, USA; J.

Todd, Pennsylvania State University, State College, PA, USA

no textBlock 1.2: Monday, July 21 (10:30 am – 12:15 pm)

no textSESSION 1.2S (MF-26-2)Monday, July 21, 10:30 am – 12:15 pm, South Tower, Royal Ballroom FoyerNDE DEMONSTRATION FORUM—IIDeveloped by: C. Jaske, Det Norske Veritas (U.S.A.), Inc., Dublin, OH, USA; J.

Todd, Pennsylvania State University, State College, PA, USASESSION 1.2X (TW-1-7)Monday, July 21, 10:30 am – 12:15 pm, North Tower, Grand Ballroom A+B+C+DOPENING CEREMONY AND PLENARY LECTURESDeveloped by: D. Peters, Structural Integrity Associates, Edinboro, PA, USAChair: D. Peters, Structural Integrity Associates, Edinboro, PA, USAEMERGING HIGH PRESSURE HIGH TEMPERATURE APPLICATIONS FORPRESSURE VESSELS AND PIPING IN THE OIL AND GAS INDUSTRYJohn Bednar, BPHIGH PRESSURE HIGH TEMPERATURE (HPHT) DESIGN GUIDELINES FORSUBSEA EQUIPMENTB. Skeels, FMC Technologies, Inc.

no textBlock 1.3: Monday, July 21 (2:00 pm – 3:45 pm)

no textSESSION 1.3A (MF-15-2)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Terrace Room E+FCOMPOSITE PIPING SYSTEMSSymposium on Plastics and Composites—Co-Sponsored by Design &Analysis, and Materials & Fabrication Technical CommitteesDeveloped by: H. Faria, INEGI, Porto, PortugalChair: H. Faria, INEGI, Porto, PortugalCo-Chair: N. O’Dowd, University of Limerick, Limerick, IrelandPVP2014-28255: COMPOSITE REPAIR PERFORMANCE AT ELEVATED TEM-PERATURESC. Alexander, Stress Engineering Services, Inc., Houston, TX, USA; J. Souza, C.Whalen, Pipe Wrap LLC, Houston, TX, USAPVP2014-28257: THE ROLE OF COMPOSITE REPAIR TECHNOLOGY IN RE-HABILITATING PIPING AND PIPELINESC. Alexander, Stress Engineering Services, Inc., Houston, TX, USAPVP2014-29061: REPAIR OF THROUGH-WALL PIPING DEFECTS USINGCARBON FIBER COMPOSITE REPAIR SYSTEMST. Mally, A. Hawkins, R. Walker, Citadel Technologies, Tulsa, OK, USA; M. Keller,University of Tulsa, Tulsa, OK, USAPVP2014-29021: EFFECTS OF METAL THICKNESS ON BONDINGSTRENGTH IN BONDED DISSIMILAR MATERIALSM. Tateno, T. Miura, Kogakuin University, Tokyo, JapanSESSION 1.3B (SPC-1-1)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom ASTUDENT PAPER COMPETITION 1: BS/MS LEVELDeveloped by: Y. Kwon, Naval Postgraduate School, Monterey, CA, USA; R. S.


Chair: K. Nikbin, Imperial College, London, United KingdomCo-Chair: Y. Shoji, Samsung C&T Corp, Seoul, Korea (Republic)PVP2014-28631: STUDY ON SIMPLIFIED PREDICTION METHOD OF THER-MAL RATCHET DEFORMATION BASED ON PARALLEL BAR MODELT. Kokufuda, N. Kasahara, University of Tokyo, Tokyo, JapanPVP2014-28552: AN FEA INVESTIGATION INTO RATCHETING INDUCEDPURELY BY CYCLIC THERMAL LOADING

C. Campbell, D. Mackenzie, University of Strathclyde, Glasgow, ScotlandPVP2014-28603: STATISTICAL MODEL OF MICRO CRACK GROWTH FORTHE EVALUATION OF ACCUMULATED FATIGUE IN NPPSS. Abe, T. Nakamura, Osaka University, Osaka, JapanPVP2014-28434: DETERMINATION OF ASME PCC-1-2010 APPENDIX-O GAS-KET PARAMETERSA. F. Garcia, C. M. Dias, S. T. Pereira, Universidade Federal do Rio de Janeiro,Rio de Janeiro, RJ, BrazilSESSION 1.3C (CS-8-2)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Terrace Room A+BASME SC III C&S ACTIVITIES FOR LWRSDeveloped by: T.-L. Sham, Oak Ridge National Laboratory, Oak Ridge, TN,

USA; R. Barnes, ANRIC, Etobicoke, ON, CanadaChair: R. Barnes, ANRIC, Etobicoke, ON, CanadaCo-Chair: T.-L. Sham, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2014-28788: ASME SECTION III FLAW TOLERANCE SAMPLE PROBLEMFOR FATIGUE DESIGN OF NUCLEAR SYSTEM COMPONENTSD. Dewees, Babcock & Wilcox, Barberton, OH, USA; P. Hirschberg, Structural In-tegrity Associates, Lafayette, CA, USA; W. Reinhardt, Candu Energy Inc., Mis-sissauga, ON, Canada; G. Stevens, Office of Nuclear Regulatory Research,Washington, DC, USA; D. H. Roarty, Westinghouse, Murrysville, PA, USAPVP2014-28307: VALIDATION OF THE (4ΔT, Σ22C) FAILURE CRITERION TOEXPLAIN THE TEST SPECIMEN THICKNESS EFFECT OF A533 GRADE BSTEEL IN THE DUCTILE-TO-BRITTLE TRANSITION TEMPERATURE REGIONY. Fujiwara, K. Lu, R. Takamura, Y. Fujita, T. Meshii, University of Fukui, Fukui-city, Fukui, JapanPVP2014-28301: APPLYING FINITE ELEMENT BASED LIMIT LOAD ANALY-SIS METHODS TO STRUCTURES UNDER DYNAMIC LOADSM. Booth, Rolls-Royce plc - Marine, Derby, United KingdomSESSION 1.3D (FSI-3-18)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Regal RoomFLUTTER / AEROELASTICITY / AERODYNAMICS IIDeveloped by: K. Fujita, Osaka City University, Osaka, Japan; J. Antunes, Insti-

tuto Superior Tecnico, Sacavem, Portugal; I. Zolotarev, Instituteof Thermomechanics AS CR, v. v. i., Prague, Czech Republic; S.Morris, University of Notre Dame, Notre Dame, IN, USA; A. Mo-hany, University of Ontario Institute, Oshawa, ON, Canada; P.Oshkai, University of Victoria, Victoria, BC, Canada

Chair: K. Fujita, Osaka City University, Osaka, JapanCo-Chair: L. Baranyi, University of Miskolc, Miskolc-Egyetemvaros, Hun-

garyPVP2014-28445: THE EFFECT OF ASPECT RATIO AND ANGLE OF ATTACKON THE TRANSITION REGIONS OF THE INVERTED FLAG INSTABILITYJ. Cosse, California Institute of Technology, Pasadena, CA, USA; J. E. Sader, Uni-versity of Melbourne, Melbourne, Victoria, Australia; D. Kim, Brown University,Providence, RI, USA; C. H. Cerdeira, M. Gharib, California Institute of Technology,Pasadena, CA, USAPVP2014-28567: UNSTEADY AERODYNAMIC FORCES MEASURED ON AFLUTTERING PROFILEI. Zolotarev, V. Vlcek, J. Kozanek, Institute of Thermomechanics AS CR, v. v. i.,Prague, Czech RepublicPVP2014-28646: FORMULATION OF THE AEROELASTIC INSTABILITYPROBLEM OF RECTANGULAR PLATES IN UNIFORM FLOW BASED ON THEHAMILTONIAN MECHANICS FOR THE CONSTRAINED SYSTEMK. Hara, Tokyo Institute of Technology, Tokyo, Japan; M. Watanabe, AoyamaGakuin University, Kanagawa, JapanPVP2014-29094: STABILITY OF BLASIUS BOUNDARY-LAYER FLOW INTER-ACTING WITH A COMPLIANT PANELK. Tsigklifis, A. Lucey, Curtin University, Perth, WA, AustraliaSESSION 1.3E (MF-4-2)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Imperial RoomMITIGATION OF RESIDUAL STRESSDeveloped by: D. Rudland, US Nuclear Regulatory Commission, Frederick, MD,

USA; F. Brust, Engineering Mechanics Corp. of Columbus,Columbus, OH, USA

Chair: D. Rudland, US Nuclear Regulatory Commission, Frederick, MD,USA

Co-Chair: F. Brust, Engineering Mechanics Corp. of Columbus, Columbus,OH, USA

PVP2014-28708: POST WELD COOL TREATMENT PROCESS OPTIMIZATIONWITH ORTHOGONAL NUMERICAL EXPERIMENTSY. Yang J. Zhao, Nanjing University of Technology, Nanjing, Jiangsu, ChinaPVP2014-28965: RESIDUAL STRESSES IN ALLOY 182 PWHT BUTTERINGAND ATTACHMENT WELD—VALIDATION BY MODELING AND MEASURE-MENTS OF A FULL SCALE MOCKUPD. Bremberg, J. Gunnars, E. Bonnaud, Inspecta Technology AB, Stockholm, Swe-

20

den; L.-O. Edling, Forsmarks Kraftgrupp AB, Östhammar, Sweden; E. Kingston,VEQTER Limited, Bristol, United KingdomPVP2014-28223: WELDING DISTORTION CAN BE MITIGATED IF WELDINGCURRENT AND TRAVELING SPEED VARY OPTIMIZED ALONG A WELDPATHM. Asadi, The University of Ottawa, Ottawa, ON, Canada; J. Goldak, CarletonUniversity, Ottawa, ON, Canada; A. Weck, The University of Ottawa, Ottawa, ON,CanadaPVP2014-28084: UNDERSTANDING WELDING COSTS USING FLUX-COREDARC WELDING (FCAW) FOR COST REDUCTION AND PRODUCTIVITY IM-PROVEMENTC. Patrick, Euroweld, Ltd., Katy, TX, USA; W. Newell, Euroweld, Ltd., Mooresville,NC, USASESSION 1.3F (MF-5-2)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Terrace Room C+DEUROPEAN PROGRAMS IN STRUCTURAL INTEGRITY IIDeveloped by: P. James, AMEC, Risley, United Kingdom; E. Keim, AREVA, Er-

langen, Germany; D. Moinereau, Electricite de France, Moret surLoing, France; T. Nicak, AREVA GmbH, Erlangen, Germany

Chair: D. Moinereau, Electricite de France, Moret sur Loing, FranceCo-Chair: T. Nicak, AREVA GmbH, Erlangen, GermanyPVP2014-28395: STYLE: MODELLING OF THE EXTRACTION OF BENDSPECIMENS FROM A REPAIR WELD AND THE INFLUENCE OF RESIDUALSTRESS ON FRACTURE TESTINGP. James, M. Ford, AMEC, Risley, United KingdomPVP2014-28402: ACHIEVEMENTS OF THE EUROPEAN STYLE PROJECTTECHNICAL TRAINING PROGRAMMEA. Toft, J. Sharples, AMEC Clean Energy Europe, Warrington, Cheshire, UnitedKingdomPVP2014-28404: BENCHMARK EVALUATIONS TO COMPARE EUROPEANENGINEERING ASSESSMENT AND LEAK-BEFORE-BREAK METHODSBASED ON STYLE MOCK-UP EXPERIMENTSC. Madew, J. Sharples, AMEC Clean Energy Europe, Warrington, Cheshire,United Kingdom; P. Budden, British Energy Generation Ltd., Barnwood, UnitedKingdom; D. Lauerova, UJV Rez, Husinec - Rez, Czech RepublicPVP2014-29004: UNDERSTANDING THE IMPACT OF HIGH-MAGNITUDE RE-PAIR-WELD RESIDUAL STRESSES ON DUCTILE CRACK INITIATION ANDGROWTH—THE STYLE MOCK-UP 2 LARGE SCALE TESTM. C. Smith, The University of Manchester, Manchester, Greater Manchester,United Kingdom; M. Bourgeois, CEA, Gif sur Yvette, France; S. Arun, The Uni-versity of Manchester, Manchester, United Kingdom; S. C. Do, University of Bristol,Bristol, United Kingdom; Y. Kayser, CEA, Gif sur Yvette, FrancePVP2014-28254: FP7 PROJECT STYLE: IMPLICATIONS AND RECOMMEN-DATIONS, DISCUSSIONE. Keim, AREVA, Erlangen, Germany; J. Sharples, AMEC Clean Energy Europe,Warrington, Cheshire, United Kingdom; T. Nicak, AREVA GmbH, Erlangen, Ger-manySESSION 1.3G (DA-1-2)Monday, July 21, 2:00 pm – 3:45 pm, North Tower, Grand Ballroom EDESIGN AND ANALYSIS OF HEAT EXCHANGERS AND COMPONENTSDeveloped by: C. Rodery, BP p.l.c., League City, TX, USA; M. Zhao, Chevron,

Houston, TX, USA; R. Frith, FE Consultants, Newstead, QLD,Australia

Chair: J. Boyle, University of Strathclyde, Glasgow, United KingdomCo-Chair: M. Zhao, Chevron, Houston, TX, USAPVP2014-28028: APPLICATION OF SURFACE CONTACT ELEMENTS FOR FI-NITE ELEMENT ANALYSIS OF FIXED TUBE SHEET HEAT EXCHANGER: ANEW APPROACHY. Naik, Zamil Steel Industry, Dammam, Saudi Arabia; K. Shirode, S. Rane, SardarPatel College of Engineering, Mumbai, Maharashtra, IndiaPVP2014-28391: DAMAGE ANALYSIS AND FATIGUE EVALUATION OF ANALUMINUM BRAZED PLATE FIN HEAT EXCHANGERR. Hölzl, P. Freko, T. Hecht, The Linde Group, Pullach, Bavaria, GermanyPVP2014-28909: MECHANICAL STUDY ON FIXED TUBESHEET BASED ONFINITE ELEMENT ANALYSISH. Yu, A. Xiong, C. Qian, Beijing University of Chemical Technology, Beijing, China;D. Mackenzie, X. Zhou, University of Strathclyde, Glasgow, ScotlandPVP2014-28373: STUDY ON EQUIVALENT STRESS TO CONTROL AVERAGEINELASTIC BEHAVIOR OF PERFORATED PLATESY. Kultayev, N. Kasahara, University of Tokyo, Tokyo, JapanSESSION 1.3H (HT-3-1)Monday, July 21, 2:00 pm – 3:45 pm, North Tower, Grand Ballroom GDESIGN AND ANALYSIS OF HIGH-PRESSURE COMPRESSORS FOR POLY-ETHYLENE PRODUCTION AND OTHER INDUSTRIAL APPLICATIONSDeveloped by: E. Giacomelli, Dott.Ing.Mario Cozzani Srl, Arcola, La Spezia,

Italy; K. C. Simpson, ExxonMobil, Baton Rouge, LA, USA

Chair: E. Giacomelli, Dott.Ing.Mario Cozzani Srl, Montespertoli, LaSpezia, Italy

Co-Chair: K. C. Simpson, ExxonMobil, Baton Rouge, LA, USAPVP2014-28057: PRELIMINARY PIPING SIZING AND PRESSURE PULSATIONEVALUATIONM. Passeri, S. Generosi, R. Bagagli, C. Maggi, General Electric, Firenze, ItalyPVP2014-28046: MANAGING TRANSIENT OPERATING CONDITIONS OF HY-PERCOMPRESSORSC. Carcasci, A. Cristofani, M. Agostini, CST - Compression Service TechnologyS.r.l., Florence, ItalyPVP2014-28012: CAPACITY CONTROL SYSTEMS OF LDPE COMPRESSORSAND INFLUENCE ON CYLINDER VALVESE. Giacomelli, A. Raggi, A. Giampà, C. Vaglini, Dott.Ing.Mario Cozzani Srl, Arcola,La Spezia, ItalySESSION 1.3I (DA-13-1)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom E+FFRACTURE 1Developed by: S. Finneran, Det Norske Veritas (U.S.A.), Inc., Hilliard, OH, USAChair: S. Finneran, Det Norske Veritas (U.S.A.), Inc., Hilliard, OH, USACo-Chair: R. Cordes, Stress Engineering Services, Inc., Houston, TX, USA;

D. Bosko, Intertek AIM, Sunnyvale, CA, USAPVP2014-28017: CRACK INITIATION AND PROPAGATION CLAD PIPE GIRTHWELD FLAWSN. Bonora, University of Cassino and Southern Lazio, Cassino, Italy; A. Carlucci,SAIPEM SA, Montigny-le-Bretonneux, France; A. Ruggiero, University of Cassinoand Southern Lazio, Cassino, Italy; G. Iannitti, TECHDYN Engineering, Rome,Italy; G. Testa, University of Cassino and Southern Lazio, Cassino, ItalyPVP2014-28033: THE COMBINED EFFECT OF A FINITE AXIAL EROSIONWITH BAUSCHINGER MODIFIED AUTOFRETTAGE ON THE 3D SIFS OFPRESSURIZED CYLINDERSQ. Ma, Walla Walla University, College Place, WA, USA; C. Levy, Florida Interna-tional University, Miami, FL, USA; M. Perl, Ben Gurion University of the Negev,Beer Sheva, IsraelPVP2014-28047: STRESS INTENSITY FACTOR INFLUENCE COEFFICIENTSFOR SEMI-ELLIPTICAL AXIAL AND CIRCUMFERENTIAL SURFACE FLAWSFOR CYLINDRICAL COMPONENTS WITH LARGE THICKNESS TO RADIUSRATIOSN. Glunt, A. Udyawar, C. Ng, Westinghouse Electric Co., Cranberry Township,PA, USAPVP2014-28099: TESTS ON SENT SPECIMENS TO STUDY GEOMETRY EF-FECTS IN THE BRITTLE TO DUCTILE TRANSITIONP. Le Delliou, EDF R&D, Moret sur Loing, France; S. Geniaut, EDF R&D, Clamart,FrancePVP2014-28155: IMPROVEMENTS TO J-ESTIMATION SCHEME FOR PRE-DICTING MOMENT-ROTATION RESPONSE OF CIRCUMFERENTIALTHROUGH-WALL CRACKS IN PIPINGJ.-S. Park, Korea Institute of Nuclear Safety, Daejeon, Korea (Republic); R. Olson,Battelle Memorial Inst., Columbus, OH, USASESSION 1.3J (MF-14-2)Monday, July 21, 2:00 pm – 3:45 pm, North Tower, Garden Room 1LBB ANALYSIS AND ASSESSMENT—PART 1Developed by: J. Sharples, AMEC Clean Energy Europe, Warrington, Cheshire,

United Kingdom; B. Bezensek, Shell UK Ltd., Aberdeen, Scot-land

Chair: J. Sharples, AMEC, Warrington, United KingdomCo-Chair: B. Bezensek, Shell UK Limited, Aberdeen, ScotlandPVP2014-28048: SURFACE TO THROUGH-WALL CRACK TRANSITIONMODEL FOR AXIAL CRACKS IN PIPESD.-J. Shim, Engineering Mechanics Corporation of Columbus, Columbus, OH,USA; D. Rudland, US Nuclear Regulatory Commission, Frederick, MD, USA; J.-S. Park, Korea Institute of Nuclear Safety, Daejeon, Korea (Republic)PVP2014-28149: LBB NOZZLE TRANSITION PARAMETER VARIATION ANDPLASTICITY INFLUENCEP. Baas, F. Blom, NRG, Petten, NetherlandsPVP2014-28170: A COUPLED FLUID-SOLID MODEL TO INVESTIGATE LEAKRATES FOR LEAK-BEFORE-BREAK ASSESSMENTSP. Gill, J. Sharples, AMEC Clean Energy Europe, Warrington, United Kingdom;K. Davey, The University of Manchester, Manchester, United KingdomSESSION 1.3K (OAC-6-2)Monday, July 21, 2:00 pm – 3:45 pm, North Tower, Garden Room 2FAILURE MECHANISMS, REMEDIES AND PREVENTIONDeveloped by: A. Cheta, Shell, Houston, TX, USA; Y. Shoji, Samsung C&T Corp,

Seoul, Korea (Republic)Chair: A. Cheta, Shell, Houston, TX, USACo-Chair: Y. Shoji, Samsung C&T Corp, Seoul, Korea (Republic)PVP2014-28096: A CASE STUDY IN TEMPER EMBRITTLEMENT OF FLU-

21

IDIZED CATALYTIC CRACKING COMPONENTSJ. Penso, Shell Projects and Technology, Cypress, TX, USA; M. Bowen, MotivaEnterprises, LLC, Norco, LA, USA; W. Newell, Euroweld, Ltd., Mooresville, NC,USAPVP2014-28736: UNDERSTAND BEHAVIORS OF BOLTED FLANGES WITHNON-AXISYMMETRIC TEMPERATURE DISTRIBUTIONG. Jung, Shell Global Solutions, Houston, TX, USA; M. Kim, Atkins, Houston, TX,USAPVP2014-28341: THE TOP TEN REASONS FOR PVP FAILURES IN THE HY-DROCARBON PROCESS INDUSTRIES (PRESENTATION ONLY)J. Reynolds, Intertek/Moody, Steamboat Springs, CO, USASESSION 1.3L (CT-4-1)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom DTIGHTNESS AND FUGITIVE EMISSIONSSymposium on Bolting and Bolted Joints—Co-Sponsored by ComputerTechnology and Bolted Joints, and Design & Analysis Technical Commit-teesDeveloped by: T. Kobayashi, Numazu College of Technology, Numazu, Japan;

S. Nagata, Toyo Engineering Corporation, Narashino, Chiba,Japan

Chair: H. Lejeune, CETIM, Nantes, FranceCo-Chair: S. Nagata, Toyo Engineering Corporation, Narashino, Chiba,

JapanPVP2014-28024: ENVIRONMENTAL CONSIDERATIONS FOR GASKET SE-LECTION AND THE DEVELOPMENT OF AN EMISSIONS CALCULATOR FORGASKET MATERIALSD. Rice, VSP Technologies, Leland, NC, USA; J. Waterland, VSP Technologies,Prince George, VA, USAPVP2014-28514; STUDY ON THE DEFLECTION OF GASKETS AND ITS EF-FECTS ON RESIDUAL BOLT FORCES AND TIGHTNESS OF BOLTEDFLANGED CONNECTIONST. Kobayashi, Numazu College of Technology, Numazu, JapanPVP2014-28606: STRESS ANALYSIS AND DESIGN OF BOLTED FLANGEDCONNECTIONS UNDER INTERNAL PRESSURET. Sawa, Y. Omiya, Hiroshima University, Hiroshima, Japan; Y. Takagi, Tokyo Elec-tric Power Co., Yokohama, JapanSESSION 1.3M (SE-13-1)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom CSEISMIC ANALYSIS AND DESIGN OF PIPING SYSTEMS—IDeveloped by: G. Slagis, G C Slagis Associates, Roseville, CA, USAChair: G. Slagis, G C Slagis Associates, Roseville, CA, USACo-Chair: K. Fujita, Osaka City University, Osaka, JapanPVP2014-29035: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 1), THEWORK SCHEDULE OF PROJECT AND A SEISMIC DESIGN OF CROSSOVERPIPING SYSTEMY. Suzuki, MHI Nuclear Engineering Company, Ltd., Yokohama, Kanagawa,Japan; K. Sato, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; H. Iiizumi, ToshibaCorporation, Yokohama, Japan; M. Hisatsune, Hitachi-GE Nuclear Energy, Ltd.,Hitachi, Japan; S. Onishi, Chubu E.P., Nagoya, Aichi, JapanPVP2014-28999: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 2), AP-PLICATION OF CCFS METHOD TO THE MULTIPLY SUPPORTED SYSTEMSK. Tai, MHI Nuclear Engineering Company, Ltd., Kobe, Japan; K. Sasajima, Mit-subishi Heavy Industries, Ltd., Kobe, Japan; S. Fukushima, Toshiba Corporation,Yokohama, Japan; N. Takamura, Hitachi-GE, Hitachi, Japan; S. Onishi, ChubuE.P., Nagoya, Aichi, JapanPVP2014-29059: FATIGUE DAMAGE ESTIMATION ON A THREE-DIMEN-SIONAL PIPING SYSTEM UNDER SEISMIC LOADINGST. Shibutani, Yokohama National University, Yokohama, Japan; I. Nakamura, Na-tional Res Inst, Tsukuba-shi, Ibaraki, Japan; A. Otani, IHI Corporation, Yokohama,JapanPVP2014-28619: STUDY ON STRENGTH OF THIN-WALLED TEE PIPE FORFAST BREEDER REACTORS UNDER SEISMIC LOADINGT. Watakabe, Japan Atomic Energy Agency, Ibaraki, Japan; K. Tsukimori, JapanAtomic Energy Agency, Fukui, Japan; A. Otani, IHI Corporation, Yokohama, Japan;M. Moriizumi, Japan Atomic Energy Agency, Ibaraki, Japan; N. Kaneko, IHI Cor-poration, Yokohama, JapanSESSION 1.3N (FSI-3-2)Monday, July 21, 2:00 pm – 3:45 pm, North Tower, Grand Ballroom FBLUFF-BODY/NEAR WAKE INTERACTIONS IIDeveloped by: K. Hourigan, Monash University, Clayton, Victoria, Australia; C.

Dalton, University of Houston, Houston, TX, USAChair: S. Étienne, École Polytechnique de Montréal, Montreal, QC,

CanadaCo-Chair: S. Belfroid, TNO, Delft, Netherlands

PVP2014-28637: ADDED-MASS AND VISCOUS-DAMPING FORCES ACTINGON VARIOUS OSCILLATING 3D OBJECTSH. Onishi, T. Kitamoto, T. Maeda, H. Shimohara, Doshisha University, Kyoto, Ky-otanabe, Japan; H. Tanigawa, Maizuru National College of Technology, Kyoto,JapanPVP2014-28750: DYNAMICS OF THE FORCED KARMAN WAKE: COMPARI-SON OF 2D AND 3D MODELSN. Mureithi, X. Xu, Ecole Polytechnique De Montreal, Montreal, QC, Canada; L.Baranyi, University of Miskolc, Miskolc-Egyetemvaros, Hungary; T. Nakamura,Osaka Sangyo University, Daito, Osaka, Japan; S. Kaneko, The University ofTokyo, Tokyo, JapanPVP2014-28758: FLUID-STRUCTURE INTERACTION AND CO-SIMULATION:VIV OF A BEAM-SUPPORTED SPHERER. Ardito, S. Malavasi, S. Mandelli, D. Novarina, F. Perotti, Politecnico di Milano,Milan, ItalyPVP2014-28056: WAKE INTERFERENCE EFFECTS FOR TWO SURFACE-MOUNTED FINITE CYLINDERS IN A TANDEM CONFIGURATIOND. Sumner, University of Saskatchewan, Saskatoon, SK, Canada; H. Li, Universityof Connecticut, Storrs, CT, USASESSION 1.3O (MF-19-2)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom BCREEP AND CREEP-FATIGUE CRACK GROWTHSymposium on Elevated Temperature and Creep—Co-Sponsored by Design& Analysis, Materials & Fabrication, and Codes & Standards Technical Com-mitteesDeveloped by: C. M. Davies, Imperial College London, London, United Kingdom;

R. Dennis, Frazer-Nash, Bristol, United KingdomChair: Y. Kim, Korea University, Seoul, Korea (Republic)Co-Chair: H. Jazaeri, The Open University, Milton Keynes, United Kingdom;

C. M. Davies, Imperial College London, London, United Kingdom;R. Dennis, Frazer-Nash, Bristol, United Kingdom

PVP2014-28021: MODELING AND SIMULATION OF CREEP CRACK GROWTHIN HIGH CHROMIUM STEELSN. Bonora, L. Esposito, S. Dichiaro, University of Cassino and Southern Lazio,Cassino, Italy; P. Folgarait, Allied International Srl, Piacenza, ItalyPVP2014-28507: THE WELD DEPTH AND ANGLE ACUITY EFFECTS ON THECRACK GROWTH BEHAVIOUR OF P91 FEATURE TEST SPECIMENSM. Yatomi, IHI Corporation, Yokohama, Japan; A. Mehmanparast, Imperial CollegeLondon, London, United Kingdom; S. Maleki, TWI, Cambridge, United Kingdom;K. Nikbin, Imperial College, London, United KingdomPVP2014-28274: REFERENCE STRESS BASED ASSESSMENT FOR CREEP-FATIGUE LIFE UNDER MULTIAXIAL CONDITIONK. Tokuda, K. Yoshida, M. Yatomi, IHI Corporation, Yokohama, JapanPVP2014-28605: INELASTIC FE ANALYSIS FOR J-INTEGRAL OF CEN-TERED-CRACKED PLATE IN CREEP-FATIGUE RANGEO. Watanabe, M. Funai, A. Matsuda, Tsukuba University, Tsukuba, Ibaraki, JapanSESSION 1.3Q (TW-1-1)Monday, July 21, 2:00 pm – 3:45 pm, North Tower, Pacific RoomTECHNICAL TUTORIAL 1: APPLICATION OF API579-1/ASME FFS-1 AND BS7910 FITNESS-FOR-SERVICE PROCEDURESDeveloped by: M. Y. A. Younan, The American University in Cairo, New Cairo,


EgyptPresented by: B. Bezensek, Shell UK Limited, Aberdeen, Scotland; I. Hadley,

TWI Ltd., Cambridge, United Kingdom; R. Brown, The Equity En-gineering Group, Inc., Shaker Heights, OH, USA

SESSION 1.3S (MF-26-3)Monday, July 21, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom FoyerNDE DEMONSTRATION FORUM—IIIDeveloped by: C. Jaske, Det Norske Veritas (U.S.A.), Inc., Dublin, OH, USA; J.


no textBlock 1.4: Monday, July 21 (4:00 pm – 5:45 pm)

no textSESSION 1.4A (MF-16-1)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Terrace Room E+FPlastic Pipe—ISymposium on Plastics and Composites—Co-Sponsored by Design &Analysis, and Materials & Fabrication Technical CommitteesDeveloped by: D.-J. Shim, S. Kalyanam, Engineering Mechanics Corporation of

Columbus, Columbus, OH, USA

22

Chair: D.-J. Shim, Engineering Mechanics Corporation of Columbus,Columbus, OH, USA

Co-Chair: S. Kalyanam, Engineering Mechanics Corporation of Columbus,Columbus, OH, USA

PVP2014-28008: DEGRADATION OF MECHANICAL PROPERTIES FORPOLYETHYLENE BY SMALL-DEFORMATION DAMAGEB. Jar, University of Alberta, Edmonton, AB, CanadaPVP2014-28232: TESTING ON FLUID FLOW AND HEAT TRANSFER PROP-ERTIES OF PLASTIC MICRO-CAPILLARY PRODUCTSB. Wang, Z. Xu, J. Wu, S. Yang, Q. Huang, Zhejiang University, Hangzhou, ChinaPVP2014-28431: CRITICAL FLAW SIZE EVALUATION IN BUTT-FUSIONJOINTS OF HDPE PIPESS. Kalyanam, P. Krishnaswamy, D.-J. Shim, F. Brust, Y. Hioe, Engineering Me-chanics Corporation of Columbus, Columbus, OH, USASESSION 1.4B (SPC-1-2)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom ASTUDENT PAPER COMPETITION 2: BS/MS LEVELDeveloped by: Y. Kwon, Naval Postgraduate School, Monterey, CA, USA; R. S.


Chair: Y. Shoji, Samsung C&T Corp, Seoul, Korea (Republic)Co-Chair: K. Nikbin, Imperial College, London, United KingdomPVP2014-28489: WATER HAMMER (WITH FSI): EXACT SOLUTION—PARAL-LELIZATION AND APPLICATIONK. Loh, Delft University of Technology, Delft, Netherlands; A. Tijsseling, TU Eind-hoven, Eindhoven, NetherlandsPVP2014-28343: DEVELOPMENT OF DESIGN RULES FOR THREE-SEG-MENT PIPE CLAMP CONNECTORSD. Bankston Jr, Washington State University, Richland, WA, USA; H. H. Kuo,.Bechtel National Inc., Richland WA, WA, USAPVP2014-28902: ESTIMATIONS OF C* AND COD FOR NON-IDEALIZEDAXIAL THROUGH-WALL CRACK IN CYLINDERS UNDER CREEP CONDI-TIONSM. G. Won, J. B. Choi, Sungkyunkwan University, Gyungi-do, Korea (Republic);N.-S. Huh, Seoul National University of Science and Technology, Seoul, Seoul,Korea (Republic)PVP2014-28380: STUDY ON VISCOUS-FRICTION HYBRID DAMPER IN-STALLED IN INDUSTRIAL PLANTSY. Enomoto, Tokyo Denki University, Adachi, Tokyo, Japan; S. Fujita, Tokyo DenkiUniversity, Tokyo, Japan; K. Minagawa, Saitama Institute of Technology, Saitama,Fukaya, JapanSESSION 1.4C (CS-2-1)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Terrace Room A+BRATCHETING AND FATIGUE ISSUES IN PRESSURE VESSEL AND PIPINGDESIGNSymposium on Fatigue Issues—Co-Sponsored by Codes & Standards, andDesign & Analysis Technical CommitteesDeveloped by: W. Reinhardt, Candu Energy Inc., Mississauga, ON, Canada; R.

Adibi-Asl, AMEC NSS, Toronto, ON, CanadaChair: X. Duan, Candu Energy Inc., Mississauga, ON, CanadaCo-Chair: W. Reinhardt, Candu Energy Inc., Mississauga, ON, CanadaPVP2014-28772: ADDITIONAL GUIDANCE FOR INELASTIC RATCHETINGANALYSIS USING THE CHABOCHE MODELW. Weitze, T. Gilman, Structural Integrity Associates, Inc., San Jose, CA, USAPVP2014-28820: VALIDATION OF THERMAL STRESS RATCHETING CRITE-RIAS. McKillop, MPR Associates, Alexandria, VA, USA; W. Reinhardt, Candu EnergyInc., Mississauga, ON, Canada; V. Reddy, The Babcock & Wilcox Company,Lynchburg, VA, USA; W. Koski, Nuscale Power, LLC, Corvallis, OR, USAPVP2014-28895: COMPARISON OF PEAK STRESS-BASED AND FLAW TOL-ERANCE-BASED FATIGUE ANALYSIS OF A CYLINDER WITH VARIABLESTRESS CONCENTRATIONSW. Reinhardt, Candu Energy Inc., Mississauga, ON, Canada; G. Stevens, Officeof Nuclear Regulatory Research, Washington, DC, USAPVP2014-28953: LOCAL VS. GLOBAL RATCHETTING IN CRACKED STRUC-TURESR. Adibi-Asl, AMEC NSS, Toronto, ON, Canada; W. Reinhardt, Candu Energy Inc.,Mississauga, ON, CanadaSESSION 1.4D (FSI-3-19)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Regal RoomFLUTTER / AEROELASTICITY / AERODYNAMICS IDeveloped by: C. Dalton, University of Houston, Houston, TX, USA; D. Sumner,

University of Saskatchewan, Saskatoon, SK, CanadaChair: J. Antunes, Instituto Superior Tecnico, Sacavem, PortugalCo-Chair: I. Zolotarev, Institute of Thermomechanics AS CR, v. v. i., Prague,

Czech Republic

PVP2014-28251: HORIZONTAL AERODYNAMIC DERIVATIVES IN BRIDGEFLYTTER ANALYSESA. Larsen, Cowi Consulting Engrs, Lyngby, DenmarkPVP2014-28258: SYNTHESIS OF A ROTOR NOISE CONTROLLER BY PAR-ALLEL BLADE-VORTEX INTERACTION AEROELASTIC MODELLINGS. Modini, G. Graziani, University of Rome La Sapienza, Rome, Italy; G. Bernar-dini, M. Gennaretti, University Roma Tre, Rome, ItalyPVP2014-28294; INTERFEROMETRIC MEASUREMENTS OF FLOW OVER ANACA0015 AIRFOIL DURING FLUTTER LIMIT CYCLE OSCILLATIONSP. Sidlof, Technical University of Liberec, Liberec, Czech Republic; V. Vlcek, In-stitute of Thermomechanics, Prague, Czech Republic; M. Stepan, Technical Uni-versity of Liberec, Liberec, Czech Republic; J. Horácek, M. Luxa, Institute ofThermomechanics, Prague, Czech RepublicPVP2014-28390: FINITE ELEMENT SIMULATION OF A GUST RESPONSE OFAN ULTRALIGHT 2-DOF AIRFOILJ. Horácek, Institute of Thermomechanics, Prague, Czech Republic; P. Svácek,Czech Technical University in Prague, Praha, Czech RepublicPVP2014-28413: VORTEX SHEDDING LOCK-IN DUE TO STREAM-WISE OS-CILLATION OF A 2D WIND TURBINE BLADE SECTION AT HIGH ANGLES OFATTACKA. Pellegrino, C. Meskell, Trinity College Dublin, Dublin, IrelandSESSION 1.4E (MF-4-3)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Imperial RoomVALIDATION OF RESIDUAL STRESS PREDICTIONSDeveloped by: F. Brust, Engineering Mechanics Corp. of Columbus, Columbus,

OH, USA; Z. Feng, Oak Ridge National Laboratory, Oak Ridge,TN, USA

Chair: F. Brust, Engineering Mechanics Corp. of Columbus, Columbus,OH, USA

Co-Chair: Z. Feng, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2014-28565: RESIDUAL STRESS INVESTIGATION IN A STAINLESSSTEEL RING WELDED CIRCULAR DISC BY OVER-CORING DEEP HOLEDRILLING SIMULATION AND MEASUREMENTG. Zheng, Equipos Nucleares S.A., Maliaño (Cantabria), Spain; S. Hossain, VE-QTER Ltd., Bristol, United Kingdom; M. C. Smith, The University of Manchester,Manchester, Greater Manchester, United Kingdom; D. Smith, Bristol University,Bristol, United KingdomPVP2014-28808: VALIDATION APPROACHES FOR WELD RESIDUALSTRESS SIMULATIONM. Hill, University of California, Davis, CA, USA; M. N. Tran, University of Califor-nia, Davis, Davis, CA, USA; J. E. Broussard, Dominion Engineering Inc., Reston,VA, USAPVP2014-29005: MODELLING AND MEASURING RESIDUAL STRESSES INPIPE GIRTH WELDS—LESSONS FROM THE STYLE FRAMEWORK 7 PROJ-ECTM. C. Smith, The University of Manchester, Manchester, Greater Manchester,United Kingdom; O. Muransky, Australian Nuclear Science and Technology Or-ganisation, Kirrawee DC, NSW, Australia; D. Smith, S. C. Do, University of Bristol,Bristol, United Kingdom; P. J. Bouchard, The Open University, Milton Keynes,United KingdomPVP2014-28571: PROBELESS TOOL AIDED FRICTION STIR WELDING AS AFABRICATION TECHNIQUE FOR TUNGSTEN EMBEDDED MECHANICALCOMPOSITE OF COPPERY. Ahuja, R. Ibrahim, Monash University, Melbourne, Victoria, Australia; A. Parad-owska, Bragg Institute, ANSTO, Sydney, NSW, Australia; D. Riley, ANSTO Instituteof Materials Engineering, Sydney, NSW, AustraliaSESSION 1.4F (MF-5-3)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Terrace Room C+DEUROPEAN PROGRAMS IN STRUCTURAL INTEGRITY IIIDeveloped by: P. James, AMEC, Risley, United Kingdom; T. Nicak, AREVA

GmbH, Erlangen, Germany; D. Moinereau, Electricite de France,Moret sur Loing, France; E. Keim, AREVA, Erlangen, Germany

Chair: T. Nicak, AREVA GmbH, Erlangen, GermanyCo-Chair: P. James, AMEC, Warrington, United KingdomPVP2014-29044: FRACTURE TOUGHNESS IN THE DUCTILE-BRITTLE TRAN-SITION AND THERMAL AGEING BEHAVIOR OF DECARBURIZED HEAT AF-FECTED ZONE OF ALLOY 52 DISSIMILAR METAL WELDS OF NUCLEARCOMPONENTSP. Joly, M. Yescas, AREVA, Paris La Défense, France; E. Keim, AREVA, Erlangen,GermanyPVP2014-28076: NESC VII SYNTHESIS: A EUROPEAN PROJECT FOR AP-PLICATION OF WPS IN RPV ASSESSMENT INCLUDING BIAXIAL LOADINGD. Moinereau, Electricite de France, Moret sur Loing, France; S. Chapuliot, S.Marie, AREVA, Paris La Défense, France; C. Jacquemoud, CEA Saclay, Gif surYvette, FrancePVP2014-28078: EFFECT OF WARM PRE-STRESS ON HIGHLY IRRADIATEDPRESSURE VESSEL STEELD. Moinereau, Electricite de France, Moret sur Loing, France; C. Landron, M. A.

23

Bachir, EDF R&D, Moret sur Loing, France; E. Garbay, EDF CEIDRE, Avoine,FrancePVP2014-29071: ANALYSIS OF CRACK FRONT LENGTH EFFECT APPLICA-BLE TO THE EVALUATION OF FRACTURE TOUGHNESS OF BASE METALFOR PWR PRESSURE VESSEL STEELP. Joly, C. Benhamou, A. Andrieu, AREVA, Paris La Defense, France; H. Churier,EDF, Villeurbanne, France; A. Parrot, EDF, Moret sur Loing, FranceSESSION 1.4G (DA-1-3)Monday, July 21, 4:00 pm – 5:45 pm, North Tower, Grand Ballroom EDESIGN & ANALYSIS OF PRESSURE VESSELS, HEAT EXCHANGERS &COMPONENTS 3Developed by: C. Rodery, BP p.l.c., League City, TX, USA; R. Frith, FE Consult-

ants, Newstead, QLD, Australia; M. Zhao, Chevron, Houston, TX,USA

Chair: C. Rodery, BP p.l.c., League City, TX, USACo-Chair: J. Boyle, University of Strathclyde, Glasgow, United Kingdom; M.

Zhao, Chevron, Houston, TX, USAPVP2014-28383: SEMIANALYTICAL METHOD FOR THE SIF CALCULATIONFOR A CRACK OF ARBITRARY SHAPE IN INFINITE BODYA. Batura, I. Orynyak, IPP-Centre Ltd., Kiev, Ukraine; A. Oryniak, National Tech-nical University of Ukraine “Kyiv Polytechnical Institute,” Kiev, UkrainePVP2014-28455: PREDICTION OF PACKED CATALYST BED STRESS ANDLOAD FOR RADIAL FLOW REACTORSM. Zhao, Chevron, Houston, TX, USA; P. Vargas, Chevron Energy TechnologyCompany, Houston, TX, USAPVP2014-28653: SEISMIC PERFORMANCE ANALYSIS OF THE LARGESPHERICAL TANKZ. Yang, China Special Equipment Inspection and Research Institute, Beijing,China; D. Zhang, Dalian University of Technology, Panjin, China; G. Wang, L.Guo, Dalian Ocean University, Dalian, China; B. Yang, China Special EquipmentInspection and Research Institute, Beijing, ChinaPVP2014-28852: DESIGN AND ANALYSIS OF BRICK LINED AUTOCLAVESFOR THE MINING INDUSTRYR. Stefanovic, Fluor, Canada, Calgary, AB, Canada; P. Tucker, SNC Lavalin,Toronto, ON, Canada; G. Miller, Fluor Enterprises, Sugarland, TX, USA; B.Messer, C. Doctor, Fluor, Canada, Calgary, AB, CanadaSESSION 1.4H (HT-3-2)Monday, July 21, 4:00 pm – 5:45 pm, North Tower, Grand Ballroom GDESIGN AND ANALYSIS OF HIGH-PRESSURE COMPRESSORS FOR POLY-ETHYLENE SERVICEDeveloped by: E. Giacomelli, Dott.Ing.Mario Cozzani Srl, Arcola, La Spezia,

Italy; K. C. Simpson, ExxonMobil, Baton Rouge, LA, USAChair: E. Giacomelli, Dott.Ing.Mario Cozzani Srl, Montespertoli, La

Spezia, ItalyCo-Chair: K. C. Simpson, ExxonMobil, Baton Rouge, LA, USAPVP2014-28154: SIZING AND DESIGN OF COMPRESSORS FOR LARGESCALE LDPE PLANTSH. Bächli, A. Allenspach, Burckhardt Compression AG, Winterthur, SwitzerlandPVP2014-28079: IMPROVED ACCURACY ON EFFICIENCY OF PK HYPER-COMPRESSOR VALVESC. Maggi, L. Tognarelli, General Electric, Firenze, Italy; J. Wojnar, Warsaw Instituteof Aviation, Warsaw, Poland, R. Bagagli, General Electric, Firenze, ItalyPVP2014-28111: INVESTIGATIONS ON EQUIPMENT COMPONENTS TO IM-PROVE LDPE PLANT PERFORMANCEU. Grassini, Donegani Anticorrosione srl, Novara, ItalySESSION 1.4I (DA-13-3)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom E+FFRACTURE 3Developed by: S. Finneran, Det Norske Veritas (U.S.A.), Inc., Hilliard, OH, USAChair: D. Bosko, Intertek AIM, Sunnyvale, CA, USACo-Chair: R. Cordes, Stress Engineering Services, Inc., Houston, TX, USA;

S. Finneran, Det Norske Veritas (U.S.A.), Inc., Hilliard, OH, USAPVP2014-28760: EFFECT OF THE TYPE OF STRESS-STRAIN LAW ON THEVALIDITY OF THE REFERENCE STRESS APPROACH IN FRACTURE ME-CHANICSP. Gilles, G. Zhang, AREVA BS, Paris La Defense, France; K. Madou, ESI-Groupfr,Lyon, FrancePVP2014-28790: SIMPLIFIED APPROACH FOR FRACTURE INTEGRITY AS-SESSMENT PROCEDURE OF FLAWED GIRTH WELD JOINT UNDER NON-CONVENTIONAL CONDITIONA. Carlucci, SAIPEM SA, Montigny-le-Bretonneux, France; K. Mcirdi, SAIPEMSA, Versailles, FrancePVP2014-28800: LIMIT PLASTIC COLLAPSE ON REMAINING LIGAMENT OFFLAWED WELDS FOR ECA APPLICATIONA. Carlucci, SAIPEM SA, Montigny-le-Bretonneux, France; K. Mcirdi, SAIPEMSA, Versailles, FrancePVP2014-28827: SIMPLIFIED TOUGHNESS RESISTANCE CURVE

A. Carlucci, SAIPEM SA, Montigny-le-Bretonneux, France; K. Mcirdi, SAIPEMSA, Versailles, France; P.-L. Auvret, J. Li, SAIPEM SA, Montignyle-Bretonneux,France, FrancePVP2014-28418: CLEAVAGE CRACK PATH PREDICTION IN A PWR VESSELSTEELX. Yang, S. Marie, C. Jacquemoud, CEA Saclay, Gif sur Yvette, FranceSESSION 1.4J (MF-14-3)Monday, July 21, 4:00 pm – 5:45 pm, North Tower, Garden Room 1LBB ANALYSIS AND ASSESSMENT—PART 2Developed by: J. Sharples, AMEC Clean Energy Europe, Warrington, Cheshire,

United Kingdom; B. Bezensek, Shell UK Ltd., Aberdeen, Scot-land

Chair: B. Bezensek, Shell UK Limited, Aberdeen, ScotlandCo-Chair: C. Madew, AMEC, Warrington, Cheshire, United KingdomPVP2014-28406: COMPARISON OF PROBABILISTIC FRACTURE MECHAN-ICS EVALUATIONS FOR A THROUGH-WALL CRACKED PIPE UNDER THESTYLE PROJECTJ. Sharples, AMEC Clean Energy Europe, Warrington, Cheshire, United Kingdom;V. Radu, RATEN-ICN, Pitesti, Romania; C. Madew, AMEC, Warrington, Cheshire,United Kingdom; P. Budden, British Energy Generation Ltd., Barnwood, UnitedKingdomPVP2014-28520: ESTIMATES OF J AND COD FOR COMPLEX-CRACKEDPIPES BASED ON FE ANALYSES AND ERS METHODJ.-U. Jeong, J. B. Choi, Sungkyunkwan University, Gyungi-do, Korea (Republic);N.-S. Huh, Seoul National University of Science and Technology, Seoul, Korea(Republic); Y. Kim, Korea University, Seoul, Korea (Republic)PVP2014-28594: FAILURE ANALYSIS OF CO SHIFT GAS HEAT EXCHANGERTUBESH. Cao, H. Zhang, M. Song, X. Shen, Shandong Special Equipment InspectionInstitute, Jinan, ChinaSESSION 1.4K (OAC-6-3)Monday, July 21, 4:00 pm – 5:45 pm, North Tower, Garden Room 2REPAIR TECHNOLOGYDeveloped by: A. Cheta, Shell, Houston, TX, USA; Y. Shoji, Samsung C&T Corp,

Seoul, Korea (Republic)Chair: A. Cheta, Shell, Houston, TX, USACo-Chair: Y. Shoji, Samsung C&T Corp, Seoul, Korea (Republic)PVP2014-28164: STRUCTURAL INTEGRITY EVALUATION FOR EMBEDDEDFLAW REPAIR TO REACTOR VESSEL UPPER HEAD PENETRATION NOZ-ZLES (PRESENTATION ONLY)K. S. Lee, Korea Hydro and Nuclear Power Co. Ltd., Daejeon, Korea (Republic)PVP2014-28184: HOW POTRERO UTILIZED FLUSH PATCHES TO MANAGELOCALIZED UNDER DEPOSIT CORROSION DAMAGE IN WATERWALLTUBESJ. Mazzeo, NRG Energy, Pittsburg, CA, USAPVP2014-28226: INTENTIONAL DESTRUCTIVE TESTING: A MEANS FOR ES-TABLISHING MECHANICAL INTEGRITY IN PLANTS, FACILITIES, ANDPIPELINESC. Alexander, B. Vyvial, Stress Engineering Services, Inc., Houston, TX, USASESSION 1.4L (CT-5-1)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom DTHREADED FASTENERSSymposium on Bolting and Bolted Joints—Co-Sponsored by ComputerTechnology and Bolted Joints, and Design & Analysis Technical Commit-teesDeveloped by: S. Nassar, Oakland University, Rochester, MI, USA; T. Fukuoka,

Kobe University, Kobe, JapanChair: S. Nassar, Oakland University, Rochester, MI, USACo-Chair: T. Fukuoka, Kobe University, Kobe, JapanPVP2014-28241: EVALUATION OF SPECIFIC MECHANICAL BEHAVIOR OFFINE SCREW THREADS BY FINITE ELEMENT ANALYSIS AND EXPERI-MENTST. Fukuoka, M. Nomura, M. Sasai, Kobe University, Kobe, JapanPVP2014-28242: EXPERIMENTAL VERIFICATION OF FINITE ELEMENT AP-PROACH FOR DESIGNING ROBUST BOLTED JOINTS USING TITANIUM ANDTITANIUM BOLTS UNDER ELEVATED TEMPERATURET. Fukuoka, M. Nomura, T. Hirai, Kobe University, Kobe, JapanPVP2014-28269: CLAMP LOAD LOSS DUE TO CYCLIC THERMAL LOADS INPRELOADED DISSIMILAR-MATERIAL JOINTSS. Nassar, A. Kazemi, M. Dyab, Oakland University, Rochester, MI, USAPVP2014-28356: EFFECT OF FASTENER UNDER HEAD CONTACT ON THEEARLY STAGE OF SELF-LOOSENING OF PRELOADED COUNTERSUNKFASTENERS SUBJECTED TO CYCLIC SHEAR LOADINGA. Zaki, Technical Engineering Consultants Inc., Troy, MI, USA; S. Nassar, Oak-land University, Rochester, MI, USAPVP2014-28719: FASTENERS—STRENGTH AND QUALITY REQUIREMENTS

24

F. Kirkemo, Statoil, Tranby, NorwaySESSION 1.4M (SE-3-1)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom CEUROPEAN RESEARCH ON STRUCTURAL SAFETY OF INDUSTRIAL FA-CILITIESDeveloped by: S. Karamanos, University of Thessaly, Volos, Greece; F. Pao-

lacci, University Roma TRe, Rome, ItalyChair: F. Paolacci, University Roma TRe, Rome, ItalyCo-Chair: K. Minagawa, Saitama Institute of Technology, Saitama, Fukaya,

JapanPVP2014-28563: ON THE EFFECTIVENESS OF TWO ISOLATION SYSTEMSFOR THE SEISMIC PROTECTION OF ELEVATED TANKSF. Paolacci, University Roma TRe, Rome, ItalyPVP2014-28703: INFLUENCE OF LOCAL WALL THINNING AND SUPPORTSTIFFNESS IN PIPING SYSTEMS ON SAFETY ASSESSMENTS FOR DY-NAMIC LOADINGK. Kerkhof, F. Dwenger, G. Hinz, S. Schmauder, Material Testing Institute, Uni-versity of Stuttgart, Stuttgart, GermanyPVP2014-28846: STRUCTURAL PERFORMANCE OF STEEL PIPE TEE-JUNC-TIONST. Papatheocharis, University of Thessaly, Volos, Greece; K. Diamanti, EBETAM—MITREC S.A., Volos, Greece; G. E. Varelis, PDL Solutions (Europe) Ltd., Hexham,Northumberland, United Kingdom; P. C. Perdikaris, S. A. Karamanos, Universityof Thessaly, Volos, GreecePVP2014-29010: SILER PROJECT: DESIGN OF THE SEISMIC ISOLATORSA. Poggianti, M. Forni, B. Ferrucci, R. Scipinotti, ENEA, Bologna, Italy; D. DeBruyn, SCK CEN, Mol, BelgiumSESSION 1.4N (FSI-3-3)Monday, July 21, 4:00 pm – 5:45 pm, North Tower, Grand Ballroom FMODELING METHODS AND FSI IN MECHANICAL AND BIOLOGICAL SYS-TEMSDeveloped by: E. de Langre, Ecole Polytechnique, Palaiseau, France; S.

Kaneko, The University of Tokyo, Tokyo, Japan; J. Horácek, In-stitute of Thermomechanics, Prague, Czech Republic; A. Mo-hany, University of Ontario Institute, Oshawa, ON, Canada; P.Oshkai, University of Victoria, Victoria, BC, Canada

Chair: E. de Langre, Ecole Polytechnique, Palaiseau, FranceCo-Chair: K. Anami, Ashikaga Inst of Technology, Ashikaga, Tochigi, Tochigi,

JapanPVP2014-28374: LARGE-EDDY SIMULATIONS OF TURBULENCE-INDUCEDVIBRATIONS IN ANNULAR PIPE FLOWJ. De Ridder, J. Degroote, J. Vierendeels, Ghent University, Ghent, Belgium; K.Van Tichelen, P. Schuurmans, SCK-CEN, Mol, BelgiumPVP2014-29095: SYRINGOMYELIA AND THE FLUID-STRUCTURE INTERAC-TIONS OF A CEREBROSPINAL WAVEGUIDEN. S. J. Elliott, A. Lucey, Curtin University, Perth, WA, Australia; D. A. Lockerby,University of Warwick, Coventry, United Kingdom; A. R. Brodbelt, The Walton Cen-tre NHS Foundation Trust, Liverpool, United KingdomPVP2014-29096: CEREBROSPINAL FLUID-STRUCTURE INTERACTIONS:THE DEVELOPMENT OF MATHEMATICAL MODELS ACCESSIBLE TO CLI-NICIANSN. S. J. Elliott, Curtin University, Perth, WA, AustraliaPVP2014-28213: EXPERIMENTAL STUDY OF A FLEXIBLE OSCILLATING-FOIL PROPULSION SYSTEM WITH VARIABLE STIFFNESS AND INERTIAA. J. Richards, P. Oshkai, University of Victoria, Victoria, BC, CanadaSESSION 1.4O (MF-19-4)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom BCREEP DEFORMATION AND RUPTURE PREDICTIONSymposium on Elevated Temperature and Creep—Co-Sponsored by Design& Analysis, Materials & Fabrication, and Codes & Standards Technical Com-mitteesDeveloped by: C. M. Davies, Imperial College London, London, United Kingdom;

R. Dennis, Frazer-Nash, Bristol, United KingdomChair: C. M. Davies, Imperial College London, London, United KingdomCo-Chair: N. Bonora, University of Cassino and Southern Lazio, Cassino,

Italy; R. Dennis, Frazer-Nash, Bristol, United KingdomPVP2014-28158: LONG-TERM CREEP RUPTURE STRENGTH OF INDIVIDUALHEATS AND RESTRICTION OF AL CONCENTRATION IN 304HTB AND316HTB STAINLESS STEELS FOR GEN IV APPLICATIONF. Abe, National Institute for Materials Science, Tsukuba, JapanPVP2014-28189: DETERMINATION OF NORTON CREEP LAW FROM SMALLPUNCH TESTX. Feng, Y. Qin, K. Ma, K. Guan, East China University of Science and Technology,Shanghai, ChinaPVP2014-28674: CREEP DEFORMATION ANALYSIS OF GRADE 91 STEELSAND PREDICTION OF CREEP STRENGTH PROPERTY

K. Kimura, K. Sawada, H. Kushima, National Institute for Materials Science,Tsukuba, Ibaraki, JapanPVP2014-28917: DEVELOPMENT OF THE RCC-MR CREEP DEFORMATIONMODEL FOR THE PREDICTION OF CREEP AND STRESS RELAXATION INAISI TYPE 321 STAINLESS STEELA. J. Moffat, J. D. Douglas, Frazer-Nash Consultancy, Dorking, Surrey, UnitedKingdom; M. White, Frazer-Nash Consultancy, Bristol, United Kingdom; M. W.Spindler, EDF Energy, Gloucester, United Kingdom; C. Austin, AMEC, Warrington,Cheshire, United KingdomSESSION 1.4Q (TW-1-9)Monday, July 21, 4:00 pm – 5:45 pm, North Tower, Pacific RoomTECHNICAL TUTORIAL 1: APPLICATION OF API579-1/ASME FFS-1 AND BS7910 FITNESS-FOR-SERVICE PROCEDURES—PART IIDeveloped by: M. Y. A. Younan, The American University in Cairo, New Cairo,


EgyptPresented by: B. Bezensek, Shell UK Limited, Aberdeen, Scotland; I. Hadley,

TWI Ltd., Cambridge, United Kingdom; R. Brown, The Equity En-gineering Group, Inc., Shaker Heights, OH, USA

SESSION 1.4S (MF-26-4)Monday, July 21, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom FoyerNDE DEMONSTRATION FORUM—IVDeveloped by: C. Jaske, Det Norske Veritas (U.S.A.), Inc., Dublin, OH, USA; J.


TUESDAY, JULY 22, 2014no text

Block 2.1: Tuesday, July 22 (8:30 am – 10:15 am)no text

SESSION 2.1A (MF-16-2)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Terrace Room E+FPLASTIC PIPE—IISymposium on Plastics and Composites—Co-Sponsored by Design &Analysis, and Materials & Fabrication Technical CommitteesDeveloped by: P. Krishnaswamy, Engineering Mechanics Corporation of Colum-

bus, Columbus, OH, USAChair: P. Krishnaswamy, Engineering Mechanics Corporation of Colum-

bus, Columbus, OH, USACo-Chair: D. Munson, EPRI, Palo Alto, CA, USAPVP2014-28682: RESEARCH ON ULTRASONIC TESTING FOR ELECTRO-FUSION JOINT OF REINFORCED THERMOPLASTIC PIPES (RTP)W. Guo, Zhejiang Special Equipment Inspection and Research Institute,Hangzhou, Zhejiang, China; J. Shi, J. Zheng, Zhejiang University, Hangzhou, Zhe-jiang, China; Z. Liu, Zhejiang Special Equipment Inspection and Research Insti-tute, Hangzhou, Zhejiang, ChinaPVP2014-28609: ULTRASONIC INSPECTION OF LARGE DIAMETER POLY-ETHYLENE PIPE USED IN NUCLEAR POWER PLANTJ. Shi, D. Hou, Zhejiang University, Hangzhou, Zhejiang, China; W. Guo, ZhejiangSpecial Equipment Inspection and Research Institute, Hangzhou, Zhejiang, China;Y. Zhou, X. Chen, Ningbo Aupul Pipe Limited Company, Cixi, Zhejiang, ChinaPVP2014-28718: NUMERICAL ANALYSIS OF FRACTURE MECHANICS OFSENB SPECIMENS PREPARED FROM HDPE PIPESM. Gonzalez, P. Teixeira, J. Gonzalez, Simon Bolivar University, Caracas, Miranda,Venezuela; R. Machado, Francisco de Miranda University, Punto Fijo, VenezuelaSESSION 2.1B (SPC-1-3)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Royal Ballroom ASTUDENT PAPER COMPETITION 3: PHD LEVELDeveloped by: Y. Kwon, Naval Postgraduate School, Monterey, CA, USA; R. S.


Chair: N. O’Dowd, University of Limerick, Limerick, IrelandCo-Chair: T. Taniguchi, Tottori University, Tottori, JapanPVP2014-28903: CONSTRAINT EFFECTS IN DUCTILE FRACTURE ON J-RE-SISTANCE CURVES FOR FULL-SCALE CRACKED PIPES AND FRACTURETOUGHNESS TESTING SPECIMENSJ.-J. Han, Y. Kim, Korea University, Seoul, Korea (Republic); R. A. Ainsworth, Man-chester University, Manchester, United KingdomPVP2014-28524: A METHOD TO IDENTIFY THE CRACK CLOSURE ANDOPENING IN CYCLIC TEARING TESTS ON FRACTURE MECHANICS SPEC-IMENSB. Tranchand, AREVA NP, Paris La Defense, France; S. Marie, CEA, Gif surYvette, France; V. Aubin, Ecole Centrale Paris, Châtenay-Malabry, FrancePVP2014-28789: A UNIFIED CONSTITUTIVE MODEL FOR HIGH TEMPERA-

25

TURE MULTIAXIAL CREEP-FATIGUE AND RATCHETING RESPONSE SIMU-LATION OF ALLOY 617N. Islam, S. Quayyum, T. Hassan, North Carolina State University, Raleigh, NC,USAPVP2014-28221: APPLICATION OF TRANSFER MATRIX METHOD TO DY-NAMIC ANALYSIS OF PIPES WITH FSIS. Li, Harbin Engineering University, Toronto, ON, Canada; B. W. Karney, Univer-sity of Toronto, Toronto, ON, Canada; G. Liu, Harbin Engineering University,Harbin, Hei Longjiang, ChinaSESSION 2.1C (CS-3-1)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Terrace Room A+BENVIRONMENTAL FATIGUE ISSUES (JOINT M&F)—ISymposium on Fatigue Issues—Co-Sponsored by Codes & Standards, andDesign & Analysis Technical CommitteesDeveloped by: H. Mehta, GE Hitachi Nuclear Energy, San Jose, CA, USA; S.

Asada, Mitsubishi Heavy Industries, Ltd., Kobe, JapanChair: S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, JapanCo-Chair: H. Mehta, GE Hitachi Nuclear Energy, San Jose, CA, USAPVP2014-28066: DISCUSSION OF FATIGUE DATA FOR AUSTENITIC STAIN-LESS STEELSP. Wilhelm, AREVA Gmbh, Erlangen, Germany; P. Steinmann, University of Er-langen-Nuremberg, Erlangen, Germany; J. Rudolph, AREVA GmbH, Erlangen,GermanyPVP2014-28098: FORMULARIZATION OF FATIGUE CRACK GROWTH RATESFOR NICKEL BASE ALLOY IN AIRY. Nomura, K. Yamamoto, Mitsubishi Heavy Industries, Takasago, Hyogo, Japan;K. Hojo, Mitsubishi Heavy Industries, Inc., Kobe, JapanPVP2014-28190: IMPLEMENTATION OF THE EPRI GUIDELINES TO FATIGUEANALYSES OF PRIMARY CIRCUIT COMPONENTS—CHALLENGES ANDRECOMMENDATIONS IN THE FRAMEWORK OF PRACTICAL APPLICATIONS. H. Reese, E.ON Kernkraft GmbH, Hannover, Germany; J. Seichter, Siem-pelkamp Pruef- und Gutachter-Ges. mbH, Dresden, Germany; D. Klucke, H. E.Karabaki, W. Mayinger, E.ON Kernkraft GmbH, Hannover, GermanyPVP2014-28207: EUROPEAN CONTRIBUTIONS TO ENVIRONMENTAL FA-TIGUE ISSUES—EXPERIMENTAL RESEARCH IN FRANCE, GERMANY & FIN-LANDT. Métais, EDF SA - SEPTEN, Villeurbanne, France; H. E. Karabaki, E.ONKernkraft GmbH, Hannover, Germany; L. De Baglion, AREVA SAS, Paris LaDéfense, France; J. Solin, VTT, Espoo, Finland, J.-C. Le Roux, EDF R&D, Moretsur Loing, FranceSESSION 2.1D (CS-1-1)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Regal RoomTHE JAMES FARR MEMORIAL SYMPOSIUM ON STRUCTURAL INTEGRITYOF PRESSURE COMPONENTS—IDeveloped by: Y. Hari, University of North Carolina Charlotte, Charlotte, NC,

USAChair: M. Rana, Praxair, Tonawanda, NY, USACo-Chair: R. Relangi, Valmet Inc., Charlotte, NC, USAPVP2014-28004: FLAW ACCEPTANCE RULE OF J-WELD OF BOTTOMMOUNTED INSTRUMENTATION NOZZLEK. Hojo, Y. Nagoshi, Mitisubishi Heavy Industries, Ltd., Kobe, Japan; M. Ochi, Mi-tisubishi Heavy Industries, Ltd., Takasago, Japan; N. Miura, Central Research In-stitute of Electric Power Indus, Yokosuka, Japan; M. Kamaya, Inst of NuclearSafety System, Mikata-gun Fukui, JapanPVP2014-28311: FRACTURE-TOUGHNESS BASED TRANSITION INDEXTEMPERATURES FOR USE IN THE ASME CODE WITH THE CRACK ARREST(KIA) CURVEM. Kirk, U.S. Nuclear Regulatory Commission, Davidsonville, MD, USA; H. Hein,AREVA, Erlangen, Germany; M. Erickson, PEAI, Unity, NH, USA; W. Server, ATIConsulting, Black Mountain, NC, USA; G. Stevens, Office of Nuclear RegulatoryResearch, Washington, DC, USAPVP2014-29017: FINITE ELEMENT ANALYSIS APPLIED TO VORTEX FINDERMODIFICATIONSY. Hari, University of North Carolina Charlotte, Charlotte, NC, USA; R. Relangi,Valmet Inc., Charlotte, NC, USASESSION 2.1E (MF-4-4)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Imperial RoomRESIDUALS STRESS PROFILESDeveloped by: Z. Feng, Oak Ridge National Laboratory, Oak Ridge, TN, USA;

M. Mochizuki, Osaka University, Osaka, JapanChair: Z. Feng, Oak Ridge National Laboratory, Oak Ridge, TN, USACo-Chair: M. Mochizuki, Osaka University, Osaka, JapanPVP2014-28217: EVALUATION OF RESIDUAL STRESS PROFILES INBS7910—PART 1: PIPE GIRTH WELDP. Dong, S. Song, University of Michigan, Ann Arbor, MI, USA; J. Zhang, Universityof New Orleans, Dublin, OH, USA

PVP2014-28828: SIMPLIFIED DISSIMILAR METAL WELD THROUGH-WALLWELD RESIDUAL STRESS MODELS FOR SINGLE V GROOVE WELDS INCYLINDRICAL COMPONENTSD. Sommerville, Structural Integrity Associates, Inc., San Jose, CA, USA; M. Qin,M. Walter, Structural Integrity Associates, Inc., Centennial, CO, USAPVP2014-28247: RESIDUAL STRESS PROFILES OF PIPE GIRTH WELDUSING A STRESS DECOMPOSITION METHODH. Teng, S. Bate, AMEC, Warrington, Cheshire, United KingdomPVP2014-28809: DEVELOPMENT OF RESIDUAL STRESS PROFILES FORDEFECT TOLERANCE ASSESSMENT OF THICK SECTION ELECTRONBEAM WELDSP. Hurrell, B. Pellereau, C. M. Gill, Rolls-Royce plc, Derby, United Kingdom; E.Kingston, VEQTER Limited, Bristol, United Kingdom; D. Smith, Bristol University,Bristol, United KingdomSESSION 2.1F (SE-4-1)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Terrace Room C+DPIPE COMPONENTS AND FITTINGS UNDER STRONG CYCLIC AND SEISMICLOADING—IDeveloped by: S. Karamanos, University of Thessaly, Volos, Greece; T. Hassan,

North Carolina State University, Raleigh, NC, USAChair: T. Hassan, North Carolina State University, Raleigh, NC, USACo-Chair: T. Matsuoka, Meiji University, Kawasaki, Kanagawa, JapanPVP2014-28116: REVIEW OF EARTHQUAKE DAMAGES OF ABOVEGROUNDSTORAGE TANKS IN JAPAN AND TAIWANS. Yoshida, Yokohama National University, Yokohama, JapanPVP2014-28234: INVESTIGATION ON FATIGUE CURVE AGAINST CYCLICLOADS OF AN EARTHQUAKE FOR PIPING COMPONENTSN. Kojima, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; M. Uesaka, Tokyo Elec-tric Power Company, Tokyo, Japan; H. Nomura, Hitachi-GE Nuclear Energy, Ltd.,Hitachi-shi Ibaraki-ken, Japan; J. Yamazaki, Toshiba Corporation Power SystemCompany, Yokohama, Japan; I. Muroya, Mitsubishi Heavy Industries, Ltd.,Takasago, Hyogo Pref, JapanPVP2014-28805: LOW CYCLE FATIGUE FAILURE RESPONSES OF LONGAND SHORT RADIUS ELBOWSM. Fenton, T. Hassan, North Carolina State University, Raleigh, NC, USASESSION 2.1G (DA-1-4)Tuesday, July 22, 8:30 am – 10:15 am, North Tower, Grand Ballroom EDESIGN & ANALYSIS OF PRESSURE VESSELS, HEAT EXCHANGERS &COMPONENTS 4Developed by: C. Rodery, BP p.l.c., League City, TX, United States; R. Frith, FE

Consultants, Newstead, QLD, Australia; M. Zhao, Chevron,Houston, TX, USA

Chair: C. Rodery, BP p.l.c., League City, TX, United StatesCo-Chair: J. Boyle, University of Strathclyde, Glasgow, United Kingdom; M.

Zhao, Chevron, Houston, TX, USAPVP2014-28897: AN ASSESSMENT OF BRANCH TECHNICAL POSITION 5-3TO DETERMINE UNIRRADIATED RTNDT FOR SA-508 CL. 2 FORGINGSG. Troyer, AREVA, Lynchburg, VA, USA; M. DeVan, AREVA Inc., Lynchburg, VA,USAPVP2014-28924: RESIDUAL STRESSES IN GIRTH WELDED JOINT OF LAY-ERED-TO-SOLID CYLINDRICAL VESSELS: A FINITE ELEMENT MODELS. Xu, G. Liu, Y. Zhao, J. Wang, China University of Petroleum (Huadong), Qing-dao, Shandong, ChinaPVP2014-28847: DESIGN AND ANALYSIS OF FLANGED SKIRT SPLICESFOR TALL PRESSURE VESSEL TOWERSR. Stefanovic, P. Ranieri, Fluor, Canada, Calgary, AB, Canada; J. I. Dorado, Idesa,Gijon, Asturias, Spain; G. Miller, Fluor Enterprises, Sugarland, TX, USAPVP2014-28957: SKIRT SPLICE METHODS FOR TALL PRESSURE VESSELTOWERST. Seipp, Becht Engineering, Calgary, AB, Canada; A. Avery, Northwest RedwaterPartnership, Calgary, AB, Canada; S. Morrison, M5 Engineering Inc., Calgary, AB,CanadaSESSION 2.1H (DA-12-1)Tuesday, July 22, 8:30 am – 10:15 am, North Tower, Grand Ballroom GCFD IN DESIGN & ANALYSISDeveloped by: S. McGuffie, Porter McGuffie, Inc., Lawrence, KS, USA; M.

Porter, Porter McGuffie, Inc., Lawrence, KS, USAChair: M. Porter, Porter McGuffie, Inc., Lawrence, KS, USACo-Chair: S. McGuffie, Porter McGuffie, Inc., Lawrence, KS, USAPVP2014-28382: NUMERICAL ESTIMATION OF FLOW PENETRATING DEPTHINTO STAGNANT BRANCH PIPES FOR THERMAL FATIGUE PREDICTIONY. Ishikawa, Y. Okuda, Toshiba Corp., Yokohama, Japan; N. Kasahara, Universityof Tokyo, Tokyo, JapanPVP2014-28702: RECIPROCATING COMPRESSOR CYLINDERS COOLING:A NUMERICAL APPROACH USING CFD WITH CONJUGATE HEAT TRANS-FER

26

F. Balduzzi, G. Ferrara, University of Florence, Florence, Italy; A. Babbini, R.Maleci, GE Oil & Gas, Florence, ItalyPVP2014-28437: MAIN STEAM LINE BREAK LOADS ON BWR AND ABWRSTEAM DRYERA. Faal-Amiri, Westinghouse Electric Company LLC, San Jose, CA, USA; A. Sale-hzadeh, Westinghouse Electric Company LLC, Cranberry Township, PA, USA; J.Shoulders, Westinghouse Electric Company LLC, Charlotte, NC, USA; P. Yuan,Westinghouse Electric Company LLC, Cranberry Township, PA, USASESSION 2.1I (MF-10-1)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Royal Ballroom E+FMECHANISTIC MODELLING OF MATERIALS I (COMBINED SESSION WITHSMALL SCALE AND MINIATURE MECHANICAL TESTING)Developed by: A. Horn, AMEC Clean Energy, Warrington, Cheshire, United

KingdomChair: A. H. Sherry, The University of Manchester, Manchester, Greater

Manchester, United KingdomCo-Chair: P. James, AMEC, Risley, United KingdomPVP2014-28656: A COMPARISON OF NOTCH FAILURE ASSESSMENT DIA-GRAM METHODS FOR ASSESSING THE FRACTURE RESISTANCE OFSTRUCTURES CONTAINING NON-SHARP DEFECTSA. Horn, AMEC Clean Energy, Warrington, Cheshire, United Kingdom; P. Budden,British Energy Generation Ltd., Barnwood, United KingdomPVP2014-28333: AN ENGINEERING PROCEDURE FOR CALCULATINGCLEAVAGE FRACTURE TOUGHNESS FROM CHARPY SPECIMEN DATAUSING A MECHANISTIC APPROACH FOR FERRITIC STEELSR. Smith, A. H. Sherry, The University of Manchester, Manchester, Greater Man-chester, United Kingdom; A. Horn, AMEC Clean Energy, Warrington, Cheshire,United Kingdom; A. Bannister, Tata Steel Research Development and Technology,Rotherham, South Yorkshire, United KingdomPVP2014-28039: DEFINITION OF A CHARPY V-NOTCHED MASTERCURVETO FIT TRANSITION OF FERRITIC STEELSS. Pillot, P. Pacqueau, Industeel Arcelormittal, Le Creusot, FrancePVP2014-28238: MECHANICAL PROPERTIES ESTIMATION OF MATERIALSWITH DIFFERENT GRAIN SIZES BY SMALL PUNCH TEST AT ELEVATEDTEMPERATURES. Yang, X. Ling, X. Yang, S. Lu, Nanjing Tech University, Nanjing, ChinaSESSION 2.1J (DA-2-1)Tuesday, July 22, 8:30 am – 10:15 am, North Tower, Garden Room 1DESIGN & ANALYSIS OF PIPING & COMPONENTS IDeveloped by: C. Basavaraju, US NRC, Washington, DC, USA; B. Li, AMEC

NSS Ltd., Markham, ON, CanadaChair: C. Basavaraju, US NRC, Washington, DC, USACo-Chair: B. Li, AMEC NSS Ltd., Markham, ON, CanadaPVP2014-28275: BURST CAUSE ANALYSIS OF THE HIGH TEMPERATURESTEAM PIPE IN HEAVY OIL WELLQ. Liu, S. Song, Y. Feng, B. Duan, Tubular Goods Research Centre of CNPC,Xian, Shaanxi, ChinaPVP2014-28548: DETERMINATION OF CREEP PROPERTIES OF PE4710CELL CLASSIFICATION 445574C HIGH DENSITY POLYETHYLENET. Adams, S. Nickholds, JD Stevenson and Associates, Inc., Independence, OH,USA; D. Munson, EPRI, Palo Alto, CA, USA; J. Andrasik, Smithers-Rapra, Inc.,Akron, OH, USAPVP2014-28549: DETERMINATION OF UPDATED FATIGUE PROPERTIES OFPE4710 CELL CLASSIFICATION 445574C HIGH DENSITY POLYETHYLENET. Adams, S. Nickholds, JD Stevenson and Associates, Inc., Independence, OH,USA; D. Munson, EPRI, Palo Alto, CA, USA; J. Andrasik, Smithers-Rapra, Inc.,Akron, OH, USAPVP2014-29065: STEAM BLOWING TECHNIQUES FOR LARGE SOLARTHERMAL POWER PLANTSM. Brenner, P. Babel, J. Jarvis, A. Vieira, J. Singh, Bechtel Power Corporation,Frederick, MD, USASESSION 2.1K (OAC-1-1)Tuesday, July 22, 8:30 am – 10:15 am, North Tower, Garden Room 2SAFETY OF PRESSURIZED SYSTEMSDeveloped by: A. Reich, Streamline Automation, LLC, Huntsville, AL, USA; G.

Young, Entergy Services Inc., Russellville, AR, USAChair: A. Reich, Streamline Automation, LLC, Huntsville, AL, USACo-Chair: G. Young, Entergy Services Inc., Russellville, AR, USAPVP2014-28037: PRESSURE SAFETY AT ARGONNE NATIONAL LABORA-TORY—A COMPENDIUM (Presentation Only)D. Ristic, Argonne National Lab, Argonne, WI, USAPVP2014-28009: ESTIMATION OF FATIGUE CRACK INITIATION LIFE FOR AFATHER MIXING ZONE MOCK-UP SUBJECTED TO THERMAL FLUCTUA-TIONS (Presentation Only)B.-M. Lei, Institute of Nuclear and New Energy Technology (INET), Beijing, China;V.-X. Tran, EDF R&D, Clamart, France; J.-C. Le Roux, EDF R&D, Moret sur Loing,

France; S. Taheri, Electricite de France, Clamart, France; X.-X. Wu, Institute ofNuclear and New Energy Technology (INET), Beijing, ChinaPVP2014-28038: COMBINED CYCLE POWER PLANT EXPANSION JOINTFAILUREA. Reich, Streamline Automation, LLC, Huntsville, AL, USAPVP2014-28595: PROBABILISTIC FRACTURE MECHANICS ANALYSIS FORDEGRADED REACTOR PRESSURE VESSEL IN PRESSURIZED WATER RE-ACTOR NUCLEAR POWER PLANTK.-R. Huang, C.-C. Huang, H.-W. Chou, Institute of Nuclear Energy Research,Taoyuan, TaiwanSESSION 2.1L (CT-6-1)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Royal Ballroom DASSEMBLY OF BOLTED JOINTSSymposium on Bolting and Bolted Joints—Co-Sponsored by ComputerTechnology and Bolted Joints, and Design & Analysis Technical Commit-teesDeveloped by: J. Waterland, VSP Technologies, Prince George, VA, USA; A.

Bausman, VSP Technologies, Kingsport, TN, USAChair: J. Waterland, VSP Technologies, Prince George, VA, USACo-Chair: A. Bausman, VSP Technologies, Kingsport, TN, USAPVP2014-28270: A SURVEY METHOD TO OPTIMIZE BOLTED FLANGEDJOINT ASSEMBLY TORQUES FOR ASME B16.5 FLANGESA. Bausman, VSP Technologies, Kingsport, TN, USA; J. Waterland, VSP Tech-nologies, Prince George, VA, USAPVP2014-28449: BUCKLING AND LATERAL PRESSURE IN SPIRAL WOUNDGASKETSH. Attoui, H. Bouzid, École de technologie supérieure, Montréal, QC, Canada; J.Waterland, VSP Technologies, Prince George, VA, USAPVP2014-28998: OTHER FACTORS BESIDES ANTI-SEIZE THAT EFFECTSTUD/BOLT BREAKOUT AND ASSEMBLY TORQUE (K-FACTOR)K. Johnson, A. Sidhu, BP Cherry Point Refinery, Blaine, WA, USAPVP2014-28730: STRESS ANALYSIS AND SEALING PERFORMANCE EVAL-UATION OF BOLTED PIPE FLANGE CONNECTION WITH LARGER NOMINALDIAMETER UNDER REPEATED TEMPERATURE CHANGESY. Omiya, Hiroshima University, Hiroshima, Japan; T. Sawa, Hiroshima University,Higashi-hiroshima City, JapanSESSION 2.1M (CS-9-1)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Royal Ballroom CASME SECTION XI CODE ACTIVITIES—ISymposium on Fitness for Service—Co-Sponsored by Design & Analysis,Materials & Fabrication, High Pressure Technology, and Codes & StandardsTechnical CommitteesDeveloped by: R. Crane, ASME, New York, NY, USA; R. Cipolla, Intertek AIM,

Sunnyvale, CA, USA; D. Scarth, Kinectrics Inc., Toronto, ON,Canada

Chair: R. Cipolla, Intertek AIM, Sunnyvale, CA, USACo-Chair: R. Crane, ASME, New York, NY, USAPVP2014-28049: CLOSED-FORM STRESS INTENSITY FACTOR SOLUTIONSFOR CIRCUMFERENTIAL THROUGH-WALL CRACKS IN CYLINDERD.-J. Shim, Engineering Mechanics Corporation of Columbus, Columbus, OH,USA; S. Xu, Kinectrics, Toronto, ON, Canada; D. Lee, Babcock & Wilcox, Barber-ton, OH, USAPVP2014-28222: CLOSED-FORM RELATIONS FOR STRESS INTENSITY FAC-TOR COEFFICIENTS FOR AXIAL ID SURFACE FLAWS IN CYLINDERS FORASME SECTION XI APPENDIX AS. Xu, Kinectrics, Toronto, ON, Canada; D. Lee, Babcock & Wilcox, Barberton,OH, USA; D. Scarth, Kinectrics Inc., Toronto, ON, Canada; R. Cipolla, IntertekAIM, Sunnyvale, CA, USAPVP2014-28355: TECHNICAL BASIS FOR PROPOSED FOURTH REVISIONTO ASME CODE CASE N-513R. McGill, Structural Integrity Associates, San Jose, CA, USA; R. Cipolla, IntertekAIM, Sunnyvale, CA, USA; G. De Boo, Exelon Nuclear, Warrenville, IL, USA; E.Houston, Structural Integrity Associates, Inc., Centennial, CO, USAPVP2014-28397: TREATMENT OF STRESS EXCEEDING MATERIAL YIELDSTRENGTH IN ASME CODE SECTION XI APPENDIX G FRACTURE TOUGH-NESS EVALUATIONSG. Stevens, Office of Nuclear Regulatory Research, Washington, DC, USA; M.Kirk, U.S. Nuclear Regulatory Commission, Davidsonville, MD, USA; H. Mehta,GE Hitachi Nuclear Energy, San Jose, CA, USA; D. Sommerville, T. J. Griesbach,Structural Integrity Associates, Inc., San Jose, CA, USAPVP2014-29111: EVALUATION OF A WELD OVERLAY DESIGN FOR ABIMETALLIC WELD USING THE FAILURE ASSESSMENT DIAGRAMN. Cofie, Structural Integrity Associates, Inc., San Jose, CA, USA; M. Lashley,Structural Integrity Associates, Huntersville, NC, USA; C. Lohse, Structural In-tegrity Associates, San Jose, CA, USA; J. Heldt, Nuclear Power Plant Leibstadt,Leibstadt, Switzerland

27

SESSION 2.1N (FSI-3-4)Tuesday, July 22, 8:30 am – 10:15 am, North Tower, Grand Ballroom FFLUIDELASTIC INSTABILITIES OF CYLINDER ARRAYS IDeveloped by: D. S. Weaver, McMaster University, Hamilton, ON, Canada; N.

Mureithi, Ecole Polytechnique De Montreal, Montreal, QC,Canada

Chair: D. S. Weaver, McMaster University, Hamilton, ON, CanadaCo-Chair: H. Goyder, Cranfield University, Shrivenham, United KingdomPVP2014-28153: STREAMWISE FLUIDELASTIC FORCES IN TUBE ARRAYSSUBJECTED TO TWO-PHASE FLOWSS. Olala, N. Mureithi, Ecole polytechnique de Montreal, Montreal, QC, Canada;T. Sawadogo, AECL, Chalk River, ON, Canada; M. J. Pettigrew, Ecole Polytech-nique, Montreal, QC, CanadaPVP2014-28231: AN ANALYSIS OF IN-FLOW FLUIDELASTIC INSTABILITYBASED ON A PHYSICAL INSIGHTT. Nakamura, Osaka Sangyo University, Daito, Osaka, JapanPVP2014-28345: BI-STABLE FLOW IN PARALLEL TRIANGULAR TUBE AR-RAYS WITH A PITCH-TO-DIAMETER RATIO OF 1.375D. Keogh, C. Meskell, Trinity College Dublin, Dublin, IrelandPVP2014-28459: PREDICTING FLOW ELASTIC INSTABILITY IN TUBE AR-RAYS WITH POTENTIAL FLOW THEORYT. Plagnard, Ecole des Mines de Paris, Paris, France; C. Beguin, S. Étienne, ÉcolePolytechnique de Montréal, Montreal, QC, CanadaPVP2014-29038: THE EFFECT OF FLAT BAR SUPPORTS ON STREAMWISEFLUIDELASTIC INSTABILITY IN HEAT EXCHANGER TUBE ARRAYSM. Hassan, University of Guelph, Guelph, ON, Canada; D. S. Weaver, McMasterUniversity, Hamilton, ON, CanadaSESSION 2.1O (MF-19-5)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Royal Ballroom BCREEP DAMAGE AND FAILURE PREDICTIONSymposium on Elevated Temperature and Creep—Co-Sponsored by Design& Analysis, Materials & Fabrication, and Codes & Standards Technical Com-mitteesDeveloped by: C. M. Davies, Imperial College London, London, United Kingdom;

R. Dennis, Frazer-Nash, Bristol, United KingdomChair: A.J. Moffat, Frazer-Nash Consultancy, Dorking, Surrey, United

KingdomCo-Chair: O. Watanabe, Tsukuba University, Tsuchiura, Ibaraki, Japan; C.

M. Davies, Imperial College London, London, United Kingdom;R. Dennis, Frazer-Nash, Bristol, United Kingdom

PVP2014-29105: EVALUATION OF CONSTRAINT EFFECT ON CREEPCRACK GROWTH BY ADVANCED CREEP MODELING AND DAMAGE ME-CHANICSS. Dichiaro, L. Esposito, N. Bonora, University of Cassino and Southern Lazio,Cassino, ItalyPVP2014-28663: PREDICTING CREEP RUPTURE USING DAMAGE MECHAN-ICSL. Esposito, N. Bonora, S. Dichiaro, University of Cassino and Southern Lazio,Cassino, ItalyPVP2014-28709: CREEP CRACK GROWTH PREDICTIONS IN 316H STEELOVER A WIDE RANGE OF STRESSES AND TEMPERATURESA. Mehmanparast, C. M. Davies, K. Nikbin, G. Webster, Imperial College London,London, United KingdomPVP2014-28984; THE DAMAGE DEVELOPMENT AND FAILURE DESCRIP-TION UNDER MULTIAXIAL CREEP OF MATERIALS USED IN POWER PLANTY. Chang, H. Xu, North China Electric Power University, Beijing, ChinaSESSION 2.1Q (TW-1-8)Tuesday, July 22, 8:30 am – 10:15 am, North Tower, Pacific RoomPVP SESSION DEVELOPER TRAININGDeveloped by: D. Peters, Structural Integrity Associates, Edinboro, PA, USA; M.

Ruggles-Wrenn, AFIT, WPAFB, OH, USAChair: D. Peters, Structural Integrity Associates, Edinboro, PA, USACo-Chair: M. Ruggles-Wrenn, AFIT, WPAFB, OH, USAPresented by: D. Peters, Structural Integrity Associates, Edinboro, PA, USA; M.

Ruggles-Wrenn, AFIT, WPAFB, OH, USASESSION 2.1S (CT-17-1)Tuesday, July 22, 8:30 am – 10:15 am, South Tower, Royal Ballroom FoyerSOFTWARE DEMONSTRATION FORUM—IDeveloped by: J. Cory, Jr, Siemens PLM Software, Milford, OH, USA

no textBlock 2.2: Tuesday, July 22 (10:30 am – 12:15 pm)

no textSESSION 2.2A (DA-6-1)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Terrace Room E+FCOMPOSITE MATERIALS AND STRUCTURESSymposium on Plastics and Composites—Co-Sponsored by Design &Analysis, and Materials & Fabrication Technical CommitteesDeveloped by: P. Mertiny, University of Alberta, Edmonton, AB, Canada; M. Rug-

gles-Wrenn, AFIT, WPAFB, OH, USAChair: P. Mertiny, University of Alberta, Edmonton, AB, CanadaCo-Chair: H. Faria, INEGI, Porto, Portugal; M. Ruggles-Wrenn, AFIT,

WPAFB, OH, USAPVP2014-28054: GLOBAL-LOCAL ANALYSIS OF A COMPOSITE RISERV. Akula, Dassault Systemes SIMULIA Corp., Lewisville, TX, USAPVP2014-28130: DESIGN-BY-ANALYSIS METHODS FOR ASYMMETRIC ORUNBALANCED CYLINDRICAL COMPOSITE PRESSURE VESSELSD. Camilleri, B. Ellul, M. Muscat, University of Malta, Msida, MaltaPVP2014-28172: INTEGRATED STRUCTURAL ANALYSIS OF COMPOSITEPRESSURE VESSELS: A DESIGN TOOLJ. B. Multhoff, ISATEC GmbH, Aachen, GermanyPVP2014-28439: EXTERNAL NOZZLE LOAD EVALUATION FOR FILAMENTWOUND FRP CYLINDRICAL VESSELSD. DeCola, J. Eisenman, Maverick Applied Science, Inc., Palmetto, FL, USAPVP2014-28941: IMPACT RESISTANCE OF FILAMENT WOUND COMPOSITEPIPES-A PARAMETRIC STUDYA. F. M. Arif, M. H. Malik, King Fahd University of Petroleum & Minerals, Dhahran,Saudi Arabia; A. Alomari, Saudi Aramco, Dammam, Saudi ArabiaSESSION 2.2B (SPC-1-4)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Royal Ballroom ASTUDENT PAPER COMPETITION 4: PHD LEVELDeveloped by: Y. Kwon, Naval Postgraduate School, Monterey, CA, USA; R. S.


Chair: T. Taniguchi, Tottori University, Tottori, JapanCo-Chair: N. O’Dowd, University of Limerick, Limerick, IrelandPVP2014-28259: ON THE CYCLIC J-INTEGRAL OF A 3D SEMI ELLIPTICALSURFACE CRACKR. Beesley, H. Chen, University of Strathclyde, Glasgow, United Kingdom; M.Hughes, Siemens Industrial Turbomachinery Ltd., Lincoln, United KingdomPVP2014-28417: STUDY OF CRACK PROPAGATION UNDER FATIGUEEQUIBIAXIAL LOADINGS. Bradai, C. Gourdin, CEA, Gif sur Yvette, France; C. Gardin, ENSMA, Poitiers,FrancePVP2014-28570: ANALYSIS OF STRESSES AND STRAINS IN PACKEDSTUFFING-BOXESM. Kazeminia, H. Bouzid, École de technologie supérieure, Montréal, QC, CanadaPVP2014-28836: FITNESS-FOR-SERVICE FRACTURE ASSESSMENTS OFDISSIMILAR PIPE GIRTH WELDS INCORPORATING NEW CRACK DRIVINGFORCE SOLUTIONSR. Souza, C. Ruggieri, University of São Paulo, São Paulo, BrazilSESSION 2.2C (CS-3-2)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Terrace Room A+BENVIRONMENTAL FATIGUE ISSUES (JOINT M&F)—IISymposium on Fatigue Issues—Co-Sponsored by Codes & Standards, andDesign & Analysis Technical CommitteesDeveloped by: H. Mehta, GE Hitachi Nuclear Energy, San Jose, CA, USA; S.

Asada, Mitsubishi Heavy Industries, Ltd., Kobe, JapanChair: H. Mehta, GE Hitachi Nuclear Energy, San Jose, CA, USACo-Chair: S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, JapanPVP2014-28300: ENVIRONMENTAL FATIGUE EVALUATION FOR CLASS 1COMPONENTS OF AN ADVANCED PWRS. Asada, K. Tatsuno, M. Toyoda, Mitsubishi Heavy Industries, Ltd., Kobe, Japan;Y. Takayama, MHI Nuclear Engineering Co. Ltd., Kobe, Japan; N. Hirota, Mit-subishi Heavy Industries, Ltd., Kobe, JapanPVP2014-28320: A STRATEGY FOR DEVELOPMENT OF AN IMPROVEDMECHANISTIC UNDERSTANDING OF ENVIRONMENTAL FATIGUEM. Twite, Rolls-Royce plc, Derby, United KingdomPVP2014-28329: LOW CYCLE FATIGUE BEHAVIOR IN AIR AND IN PWRWATER OF A TYPE 304L AUSTENITIC STAINLESS STEEL MANUFACTUREDBY HOT ISOSTATIC PRESSING PROCESSL. De Baglion, AREVA SAS, Paris La Défense, France; D. Cedat, AREVA, LeCreusot, France; P. Ould, AREVA, Paris, La Defense, France; W.-J. Chitty, AREVA,Le Creusot, FrancePVP2014-28408: STATUS OF THE FRENCH METHODOLOGY PROPOSAL

28

FOR ENVIRONMENTALLY ASSISTED FATIGUE ASSESSMENTT. Métais, EDF SA - SEPTEN, Villeurbanne, France; S. Courtin, L. De Baglion,AREVA SAS, Paris La Défense, France; P. Genette, EDF SEPTEN, Villeurbanne,France; C. Gourdin, CEA, Gif sur Yvette, FrancePVP2014-28547: COMPARISON OF FRENCH RSEM AND BPVC SECTION XI-FATIGUE CRACK GROWTH ANALYSIS (Presentation Only)C. Faidy, AFCEN, Tassin, FranceSESSION 2.2D (CS-1-2)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Regal RoomTHE JAMES FARR MEMORIAL SYMPOSIUM ON STRUCTURAL INTEGRITYOF PRESSURE COMPONENTS—IIDeveloped by: Y. Hari, University of North Carolina Charlotte, Charlotte, NC,

USA; G. Brar, Guru Nanak Dev Engineering College, Ludhiana,India

Chair: R. Relangi, Valmet Inc., Charlotte, NC, USACo-Chair: G. Brar, Guru Nanak Dev Engineering College, Ludhiana, IndiaPVP2014-28540: ASSESSMENT OF FRACTURE TOUGHNESS MODELS FORFERRITIC STEELS USED IN SECTION XI OF THE ASME CODE RELATIVETO CURRENT BEST-ESTIMATE MODELSM. Kirk, U.S. Nuclear Regulatory Commission, Davidsonville, MD, USA; M. Er-ickson, PEAI, Unity, NH, USA; G. Stevens, Office of Nuclear Regulatory Research,Washington, DC, USA; R. Cipolla, Intertek AIM, Sunnyvale, CA, USA; W. Server,ATI Consulting, Black Mountain, NC, USAPVP2014-29082: RESIDUAL STRESSES IN BUTT WELDING OF TWO CIRCU-LAR PIPES—AN EXPERIMENTAL AND NUMERICAL INVESTIGATIONG. Brar, Guru Nanak Dev Engineering College, Ludhiana, IndiaPVP2014-29083: FAILURE BEHAVIOR OF STRUCTURAL SQUARE HOLLOWSECTION CORNER WELDED JOINTH. Singh, Sri Guru Granth Sahib World University, Fatehgarh Sahib, Punjab, India;G. Brar, Guru Nanak Dev Engineering College, Ludhiana, India; H. Singh, RayatInstitute of Engineering and Information Technology, Saheed Bhagat Singh Nagar,Punjab, IndiaPVP2014-28729: LARGE OPENINGS IN CYLINDRICAL PRESSURE VES-SELS—AN ASSESSMENT BASED ON ABSOLUTE SIZED. Chandiramani, LR Insurance, Inc., Mumbai, India; S. Gopalakrishnan, A. Math-kar, Lloyd’s Register Asia, Mumbai, Maharashtra, IndiaSESSION 2.2E (MF-4-5)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Imperial RoomMATERIAL MODELING FOR WELDING RESIDUAL STRESS SIMULATIONDeveloped by: M. Mochizuki, Osaka University, Osaka, Japan; A. H. Mahmoudi,

Bu-Ali Sina University, Hamedan, IranChair: M. Mochizuki, Osaka University, Osaka, JapanCo-Chair: A. H. Mahmoudi, Bu-Ali Sina University, Hamedan, IranPVP2014-28869: HIGH TEMPERATURE DYNAMICS STRAIN HARDENING BE-HAVIOR IN STAINLESS STEELS AND NICKEL ALLOYS PART I—UNIAXIALTENSILE LOADINGX. Yu, D. Qiao, Z. Feng, Oak Ridge National Laboratory, Oak Ridge, TN, USA; P.Crooker, Electric Power Research Institute, Palo Alto, CA, USA; Y. Wang, OakRidge National Laboratory, Oak Ridge, TN, USAPVP2014-28972: ON THE THERMO-MECHANICAL BEHAVIOUR OF SA508GRADE 4 FERRITIC STEELH. Abdolvand, J. A. Francis, F. Azough, J. Walsh, Manchester University, Man-chester, United Kingdom; C. M. Gill, Rolls-Royce plc, Derby, United KingdomPVP2014-28163: FINITE ELEMENT MODELLING OF WELDED AUSTENITICSTAINLESS STEEL PLATE WITH 8-PASSESV. I. Patel, O. Muransky, C. Hamelin, Australian Nuclear Science and TechnologyOrganisation, Sydney, Australia; M. Olson, M. Hill, University of California, Davis,CA, USAPVP2014-28775: CHARACTERIZATION AND MODELLING OF TENSILEFLOW BEHAVIOR OF NI BASE ALLOY 690 AT VARIOUS TEMPERATURESAND STRAIN RATESJ. Blaizot, D. Nelias, T. Chaise, M. Perez, INSA Lyon, Villeurbanne, FranceSESSION 2.2F (SE-4-2)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Terrace Room C+DPIPE COMPONENTS AND FITTINGS UNDER STRONG CYCLIC AND SEISMICLOADING—IIDeveloped by: S. Karamanos, University of Thessaly, Volos, Greece; T. Hassan,

North Carolina State University, Raleigh, NC, USAChair: T. Hassan, North Carolina State University, Raleigh, NC, USACo-Chair: C.-S. Tsai, Feng Chia University, Taichung, TaiwanPVP2014-28819: PREDICTION OF MARGINS IN THE TBS SEISMIC CONSID-ERATIONS ANALYSIS FOR CIRCUMFERENTIAL SURFACE CRACKED PIP-ING UNDER BEYOND DESIGN BASIS SEISMIC LOADINGM. Uddin, Engineering Mechanics Corp. of Columbus, Columbus, OH, USA; T.Zhang, Caterpillar Inc., Peoria, IL, USA; F. Brust, G. Wilkowski, Engineering Me-chanics Corp. of Columbus, Columbus, OH, USA; A. A. Betervide, Nucleoeléctrica

Argentina S.A., Buenos Aires, ArgentinaPVP2014-29112: CYCLIC LOADING TEST AND NUMERICAL ANALYSIS OFFLANGED JOINT AND REDUCER OF RHR PIPING SYSTEMSZ.-Y. Lai, National Center for Research on Earthquake Engineering, Taipei, Taiwan;Y.-F. Liu, C.-C. Yu, National Taiwan University, Taipei, Taiwan; J.-F. Chai, NationalCenter for Research on Earthquake Engineering, Taipei, Taiwan; Y.-N. Huang,National Taiwan University, Taipei, TaiwanPVP2014-29113: NUMERICAL ANALYSIS OF A RHR PIPING SYSTEM SUB-JECT TO SEISMIC LOADINGM.-Y. Shen, Z.-Y. Lai, J.-F. Chai, F.-R. Lin, National Center for Research on Earth-quake Engineering, Taipei, Taiwan; Y.-N. Huang, National Taiwan University,Taipei, TaiwanSESSION 2.2G (CS-12-1)Tuesday, July 22, 10:30 am – 12:15 pm, North Tower, Grand Ballroom ERECENT DEVELOPMENTS IN EUROPEAN CODES AND STANDARDSDeveloped by: J. Sharples, AMEC Clean Energy Europe, Warrington, Cheshire,

United Kingdom; A. Toft, Amec Nuclear Services, Warrington,Cheshire, United Kingdom

Chair: J. Sharples, AMEC Clean Energy Europe, Warrington, Cheshire,United Kingdom

Co-Chair: A. Toft, Amec Nuclear Services, Warrington, Cheshire, UnitedKingdom

PVP2014-28129: RECENT AMENDMENTS OF EN13445-3, CLAUSE 18 ANDRELATED ANNEXES: DETAILED ASSESSMENT OF FATIGUE LIFEJ. Rudolph, P. Wilhelm, AREVA GmbH, Erlangen, Germany; G. Baylac, Guy Bay-lac Consultant, Paris, France; J. Wintle, E. Buennagel, TWI Ltd., Cambridge,United KingdomPVP2014-28501: PRESENTATION OF NEW EDITION OF RCC-M CODE 2012AND LATEST ADDENDA 2014P. Malouines, Areva, Paris La Defense, FrancePVP2014-28152: EFFECTS OF MECHANICAL LOADING ON RESIDUALSTRESS AND FRACTURE: PART I: BACKGROUND TO THE BS 7910:2013RULESI. Hadley, S. D. Smith, TWI Ltd., Cambridge, United KingdomPVP2014-28810: UPDATE ON EUROPEAN STANDARDS AND GUIDELINESFOR MANAGEMENT OF INTEGRITY OF BOLTED JOINTSR. Noble, 1tegrity Limited, Sunderland, Tyne and Wear, United KingdomPVP2014-28092: EFFECTS OF MECHANICAL LOADING ON RESIDUALSTRESS AND FRACTURE: PART II: VALIDATION OF THE BS 7910:2013RULESI. Hadley, S. D. Smith, TWI Ltd., Cambridge, United KingdomSESSION 2.2H (MF-12-1)Tuesday, July 22, 10:30 am – 12:15 pm, North Tower, Grand Ballroom GPIPELINE INTEGRITYDeveloped by: X.-K. Zhu, EWI, Columbus, OH, USAChair: X.-K. Zhu, EWI, Columbus, OH, USACo-Chair: D.-Y. Park, CanmetMATERIALS, Natural Resources Canada,

Calgary, AB, CanadaPVP2014-28131: FRACTURE TESTING OF CLAMPED AND SHALLOWCRACK BEND SPECIMENS FOR J-R CURVE MEASUREMENTS OF APIPELINE STEELL. L. S. Mathias, University of Sao Paulo, Sao Paulo, Brazil; E. Hippert, Petrobas,Rio De Janeiro, Rio de Janeiro, Brazil; C. Ruggieri, University of Sao Paulo, SaoPaulo, BrazilPVP2014-28339: THREE-DIMENSIONAL FRACTURE MECHANICS ANALY-SES OF SINGLE EDGE CRACKED PLATE SPECIMENSZ. Jin, X. Wang, Carleton University, Ottawa, ON, CanadaPVP2014-28415: LOW-CONSTRAINT TOUGHNESS TESTING OF TWO SE(T)METHODS IN A SINGLE SPECIMEND.-Y. Park, J.-P. Gravel, CanmetMATERIALS, Natural Resources Canada, Cal-gary, AB, Canada; H. Simha, J. Liang, CanmetMATERIALS, Natural ResourcesCanada, Hamilton, AB, Canada; D.-M. Duan, TransCanada, Calgary, AB, CanadaPVP2014-28983: EVALUATION OF STRENGTH DESIGN CRITERIA ANDPLASTIC FLOW CRITERIA FOR PRESSURE VESSELSX. Zhu, EWI, Columbus, OH, USASESSION 2.2I (MF-10-2)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Royal Ballroom E+FMECHANISTIC MODELLING OF MATERIALS II (CLEAVAGE FRACTURE ANDCRACK GROWTH)Developed by: A. Horn, AMEC Clean Energy, Warrington, Cheshire, United

KingdomChair: A. Horn, AMEC Clean Energy, Warrington, Cheshire, United

KingdomCo-Chair: P. James, AMEC, Risley, United KingdomPVP2014-28543: DISFRAC TESTING AND RESULTSM. Erickson, K. Cochran, PEAI, Unity, NH, USA

29

PVP2014-28062: A WEIBULL STRESS APPROACH INCORPORATING THECOUPLING EFFECT OF CONSTRAINT AND PLASTIC STRAIN IN CLEAVAGEFRACTURE TOUGHNESS PREDICTIONSC. Ruggieri, University of Sao Paulo, Sao Paulo, Brazil; R. H. Dodds Jr., Universityof Illinois at Urbana-Champaign, Urbana, IL, USAPVP2014-28425: THREE-DIMENSIONAL FINITE ELEMENT SIMULATIONS OFELASTIC AND ELASTIC-PLASTIC CRACK GROWTH USING AUTOMATEDRE-MESHING TECHNIQUEST. London, TWI Ltd., Middlesbrough, Teesside, United Kingdom; S. D. Smith, E.Eren, TWI Ltd., Cambridge, United KingdomPVP2014-28904: DUCTILE FRACTURE SIMULATION OF CRIEPI STPT 410PIPES WITH CIRCUMFERENTIAL CRACKH. Nam, Y.-R. Oh, J.-J. Han, C.-Y. Oh, Y. Kim, Korea University, Seoul, Korea (Re-public)SESSION 2.2J (DA-2-2)Tuesday, July 22, 10:30 am – 12:15 pm, North Tower, Garden Room 1DESIGN & ANALYSIS OF PIPING & COMPONENTS IIDeveloped by: B. Li, AMEC NSS Ltd., Markham, ON, Canada; C. Basavaraju,

US NRC, Washington, DC, USAChair: B. Li, AMEC NSS Ltd., Markham, ON, CanadaCo-Chair: C. Basavaraju, US NRC, Washington, DC, USAPVP2014-28044: THE ADVANTAGE OF USING A FILE DATA TRANSFERMETHOD IN A PLANT DESIGNP. K. Fung, M. Fung, Vista-IMV JV Corporation, Calgary, AB, Canada; A. Fung,Hai Consultants Inc., Calgary, AB, Canada; R. H. Fung, NewTechQ LLC, SanFrancisco, CA, USAPVP2014-28125: FINITE ELEMENT ANALYSIS OF A PIPE JUNCTION WITHTHERMAL SLEEVE SUBJECT TO A THERMAL AND PRESSURE TRANSIENTEVENTSA. Pattinson, J. Dodds, G. Reed, Assystem UK Ltd., Sunderland, United Kingdom;P. Hugill, Rolls-Royce, Derby, United KingdomPVP2014-28327: VIBRATION ANALYSIS OF CURVED PIPES CONVEYINGFLUIDG. Liu, Harbin Engineering University, Harbin, Hei Longjiang, China; S. Li, HarbinEngineering University, Toronto, ON, Canada; B. W. Karney, University of Toronto,Toronto, ON, CanadaPVP2014-28400: NUMERICAL SIMULATION OF LASER SHOCK PEENING INPRESENCE OF WELD FOR FATIGUE LIFE DESIGNE. Julan, EDF R&D, Clamart, France; S. Taheri, Electricite de France, Clamart,France; C. Stolz, LaMSID CNRS UMR 8193, Clamart, France; P. Peyre, Procédéset Ingenierie en Mécanique et Matériaux (PIMM), Paris, France; P. Gilles, AREVA,Paris La Defense, FranceSESSION 2.2K (OAC-1-2)Tuesday, July 22, 10:30 am – 12:15 pm, North Tower, Garden Room 2RELIABILITY AND RISK ASSESSMENTDeveloped by: A. Reich, Streamline Automation, LLC, Huntsville, AL, USA; G.

Young, Entergy Services Inc., Russellville, AR, USAChair: A. Reich, Streamline Automation, LLC, Huntsville, AL, USACo-Chair: G. Young, Entergy Services Inc., Russellville, AR, USAPVP2014-28350: STRUCTURAL RELIABILITY EVALUATION ON THE PRES-SURIZED WATER REACTOR PRESSURE VESSEL UNDER PRESSURIZEDTHERMAL SHOCK EVENTSH.-W. Chou, C.-C. Huang, Institute of Nuclear Energy Research, Taoyuan, Tai-wanPVP2014-28403: ADDITIONAL DATA CONCERNING FRENCH PWR RPVSTEEL TO EVALUATE THE RELEVANCE OF A SIZE EFFECT CORRECTIONON TOUGHNESS IN THE DUCTILE-TO-BRITTLE TRANSITIONC. Jacquemoud, CEA Saclay, Gif sur Yvette, France; I. Delvallée-Nunio, M. Ned-elec, F. Balestreri, IRSN, Fontenay-aux-Roses, FrancePVP2014-28599: THE EFFECT OF INSPECTION ON MAINTENANCE PLAN-NING FOR FOSSIL FIRED POWER PLANTJ. Takahashi, IHI Corporation, Tokyo, Japan; S. Sakai, University of Tokyo, Tokyo,JapanPVP2014-29028: TECHNIQUE OF INTEGRITY ASSESSMENT FOR ATMOS-PHERIC STORAGE TANKS (PRESENTATION ONLY)G. Li, China Special Equipment Inspection and Research Institute, Beijing, ChinaSESSION 2.2L (CT-9-1)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Royal Ballroom DPANEL SESSION: ISSUES RELATED TO BOLTED FLANGE JOINTSSymposium on Bolting and Bolted Joints—Co-Sponsored by ComputerTechnology and Bolted Joints, and Design & Analysis Technical Commit-teesDeveloped by: J. Waterland, VSP Technologies, Prince George, VA, USA; T.

Kobayashi, Numazu College of Technology, Numazu, JapanChair: J. Waterland, VSP Technologies, Prince George, VA, USACo-Chair: T. Kobayashi, Numazu College of Technology, Numazu, Japan

Panelists:R. Wacker, Inertech, Inc., Newark, DE, USAJ. McCarthy, Dominion, Norfolk, VA, USAN. Ferguson, Hydratight, Houston, TX, USAJ. Waterland, VSP Technologies, Prince George, VA, USASESSION 2.2M (CS-14-1)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Royal Ballroom CREPAIR, REPLACEMENT AND MITIGATION FOR FITNESS-FOR-SERVICERULESSymposium on Fitness for Service—Co-Sponsored by Design & Analysis,Materials & Fabrication, High Pressure Technology, and Codes & StandardsTechnical CommitteesDeveloped by: R. Yonekawa, Bechtel Corporation, San Francisco, CA, USA; K.

Dozaki, Japan Atomic Power Company, Tokyo, JapanChair: M. Rana, Praxair, Tonawanda, NY, USACo-Chair: K. Hojo, Mitsubishi Heavy Industries, Inc., Kobe, JapanPVP2014-28367: EXPERIENCE OF WORK FOR REPLACING REACTOR RE-CIRCULATION PIPING IN NARROW SPACE OF MARK-I CONTAINMENT VES-SELK. Shiraki, A. Taniguchi, The Japan Atomic Power Company, Fukui, Japan; T. Fu-jino, S. Nakama, The Japan Atomic Power Company, Tokyo, Japan; O. Suzuki,The Japan Atomic Power Company, Fukui, JapanPVP2014-28470: ADVANCED INLAY SYSTEM FOR INLET/OUTLET NOZZLESOF RV FOR PREVENTIVE MAINTENANCE AGAINST ALLOY 600 PWSCC INJAPANESE PWR PLANTSM. Kizawa, K. Yamamoto, Y. Kobayashi, H. Kawazoe, Y. Miyoshi, Mitsubishi HeavyIndustries, Ltd., Kobe, JapanPVP2014-29060: RELIABILITY OF WATER JET PEENING AS RESIDUALSTRESS MITIGATIONY. Kono, M. Noda, K. Okimura, M. Tajima, Mitsubishi Heavy Industries, Ltd., Kobe,JapanPVP2014-29062: ADVANCEMENT OF LINING INSPECTION TECHNOLOGYINSIDE SEAWATER PIPINGY. Kono, K. Okimura, A. Minamiyama, M. Noda, Mitsubishi Heavy Industries, Ltd.,Kobe, JapanSESSION 2.2N (FSI-3-5)Tuesday, July 22, 10:30 am – 12:15 pm, North Tower, Grand Ballroom FFLUIDELASTIC INSTABILITIES OF CYLINDER ARRAYS IIDeveloped by: D. S. Weaver, McMaster University, Hamilton, ON, Canada; M.

Hassan, University of Guelph, Guelph, ON, Canada; T. Naka-mura, Osaka Sangyo University, Daito, Osaka, Japan

Chair: M. Hassan, University of Guelph, Guelph, ON, CanadaCo-Chair: T. Nakamura, Osaka Sangyo University, Daito, Osaka, JapanPVP2014-28429: IN-PLANE VIBRATION DAMPING OF A U-TUBE WITH WETAND DRY FLAT-BAR SUPPORTSP. Feenstra, V. Janzen, B. Smith, Atomic Energy of Canada Limited, Chalk River,ON, CanadaPVP2014-28456: TWO-PHASE FLOW DAMPING: EFFECT OF VOID FRAC-TION, FLOW RATE AND EXTERNAL EXCITATIONC. Charreton, C. Beguin, Annie Ross, S. Étienne, M. J. Pettigrew, École Polytech-nique de Montréal, Montreal, QC, CanadaPVP2014-28783: IMPLEMENTATION IN VIBIC OF AN IMPROVED TIME DO-MAIN SIMULATION MODEL FOR FLUIDELASTIC INSTABILITY IN TUBE AR-RAYST. Sawadogo, Y. Han, Atomic Energy of Canada Limited, Chalk River, ON,Canada; N. Mureithi, Ecole Polytechnique De Montreal, Montreal, QC, CanadaPVP2014-28442: CRACK GROWTH PREDICTION AND LEAKAGE POTEN-TIAL OF STEAM GENERATOR TUBES SUBJECTED TO FLOW INDUCED VI-BRATIONSS. El Bouzidi, M. Hassan, University of Guelph, Guelph, ON, Canada; J. Riznic,Canadian Nuclear Safety Commission, Ottawa, ON, CanadaSESSION 2.2O (HT-5-2)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Royal Ballroom BPANEL SESSION: DISCUSSION OF API17TR8 REQUIREMENTS AS RE-LATED TO ASME CODES AND STANDARDSDeveloped by: D. Peters, Structural Integrity Associates, Edinboro, PA, USA; M.

Pham, BP America, Houston, TX, USAChair: J. Bednar, BP America, Houston, TX, USACo-Chair: N. McKie, FMC Technologies, Houston, TX, USAPanelists:H. B. Skeels, FMC Technologies, Inc., Houston, TX, USAP. Bunch, Cameron, Inc., Houston, TX, USAS. Shademan, BP America, Houston, TX, USAN. McKie, FMC Technologies, Inc., Houston, TX, USAM. Pham, BP America, Houston, TX, USA

30

SESSION 2.2S (CT-17-2)Tuesday, July 22, 10:30 am – 12:15 pm, South Tower, Royal Ballroom FoyerSOFTWARE DEMONSTRATION FORUM—IIDeveloped by: J. Cory, Jr, Siemens PLM Software, Milford, OH, USA

no textBlock 2.3: Tuesday, July 22 (2:00 pm – 3:45 pm)

no textSESSION 2.3A (MF-23-1)Tuesday, July 22, 2:00 pm – 3:45 pm, South Tower, Terrace Room E+FADVANCED SENSOR TECHNOLOGIES FOR MONITORING STRUCTURALINTEGRITY OF PVP SYSTEMSDeveloped by: V. Giurgiutiu, University of South Carolina, Columbia, SC, USA;

P.-S. Lam, A. Mendez-Torres, Savannah River National Labora-tory, Aiken, SC, USA

Chair: V. Giurgiutiu, University of South Carolina, Columbia, SC, USACo-Chair: P.-S. Lam, Savannah River National Laboratory, Aiken, SC, USAPVP2014-28010: CHALLENGES AND OPPORTUNITIES FOR SHM IN PVP AP-PLICATIONSV. Giurgiutiu, University of South Carolina, Columbia, SC, USAPVP2014-28668: CREEP MONITORING USING A DIRECTIONAL POTENTIALDROP SENSORJ. Corcoran, C. M. Davies, Imperial College London, London, United Kingdom; P.B. Nagy, University of Cincinnati, Cincinnati, OH, USA; P. Cawley, Imperial CollegeLondon, London, United KingdomPVP2014-28887: ANALYTICAL MODEL OF NUCLEAR ENVIRONMENTAL EF-FECTS WITH PIEZOELECTRIC WAFER ACTIVE SENSORSB. Lin, University of South Carolina, Columbia, SC, USA; M. Gresil, University ofManchester, Manchester, United Kingdom; L. Yu, University of South Carolina,Columbia, SC, USA; A. Mendez-Torres, Savannah River National Laboratory,Aiken, SC, USA; V. Giurgiutiu, University of South Carolina, COLUMBIA, SC, USAPVP2014-28446: USE OF LASER MEASUREMENT SYSTEMS FOR OUT-OF-ROUNDNESS CHECK OF ASME BVP SECTION VIII DIV.1 PRESSURE VES-SELSB. Millet, Fluor Enterprises, Inc., Pasadena, TX, USA; P. Di Lillo, Walter TostoSpA, Chieti, Italy; R. Whipple, Fluor Enterprises, Inc., San Benito, TX, USA; K.Kirkpatrick, G. Miller, Fluor Enterprises, Sugar Land, TX, USAPVP2014-29058: TIME AND TEMPERATURE DEPENDENT PROPERTY OF ASENSOR CANDIDATE MATERIAL : POLYMER DERIVED CERAMICS (PDC)T. Cui, University of South Carolina, Columbia, SC, USA; G. Shao, L. An, Univer-sity of Central Florida, Orlando, FL, USA; W. Wang, Guangzhou Institute of Ad-vanced Technology, Chinese Academy of Science, Guangzhou, China; Y. J. Chao,Tianjin University, Tianjin, ChinaSESSION 2.3B (SPC-2-2)Tuesday, July 22, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom ASTUDENT PAPER SYMPOSIUM 2Developed by: Y. Kwon, Naval Postgraduate School, Monterey, CA, USA; R. S.


Chair: S. Leen, NUI Galway, Galway, IrelandCo-Chair: S. Iyer, Candu Energy, Mississauga, ON, CanadaPVP2014-28137: INSTRUMENTATION DEVELOPMENT AND VALIDATIONFOR AN EXPERIMENTAL STUDY OF STEAM GENERATOR TUBE LOADINGDURING BLOWDOWNO. Hamouda, D. S. Weaver, McMaster University, Hamilton, ON, Canada; J.Riznic, Canadian Nuclear Safety Commission, Ottawa, ON, CanadaPVP2014-28025: EFFECT OF JOINT THICKNESS ON RESIDUAL STRESS INLASER / ELECTRON BEAM WELDED 9Cr-1Mo(V, Nb) STEELS. Kumar, Bhabha Atomic Research Centre / Homi Bhabha National Institute,Mumbai, Maharashtra, India; P. J. Bouchard, Open University, Milton Keynes,United Kingdom; G. K. Dey, Bhabha Atomic Research Centre / Homi Bhabha Na-tional Institute, Mumbai, Mumbai, Maharashtra, IndiaPVP2014-28318: APPLICATION OF 3D X-RAY TOMOGRAPHY TO ENHANCETHE CALIBRATION OF DUCTILE FRACTURE MODELSM. Daly, F. Leonard, A. H. Sherry, The University of Manchester, Manchester, Man-chester, United KingdomPVP2014-28845: OPTIMISED NEURAL NETWORK PREDICTION OF RESID-UAL STRESS PROFILES FOR STRUCTURAL INTEGRITY ASSESSMENT OFPIPE GIRTH WELDSJ. Mathew, R. J. Moat, P. J. Bouchard, the Open University, Milton Keynes, UnitedKingdomSESSION 2.3C (CS-3-3)Tuesday, July 22, 2:00 pm – 3:45 pm, South Tower, Terrace Room A+BENVIRONMENTAL FATIGUE ISSUES (JOINT M&F)—IIISymposium on Fatigue Issues—Co-Sponsored by Codes & Standards, Ma-terials & Fabrication, and Design & Analysis Technical Committees

Developed by: H. Mehta, GE Hitachi Nuclear Energy, San Jose, CA, USA; S.Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan

Chair: S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, JapanCo-Chair: H. Mehta, GE Hitachi Nuclear Energy, San Jose, CA, USAPVP2014-28465: FATIGUE OF STAINLESS STEEL IN SIMULATED OPERA-TIONAL CONDITIONS: EFFECTS OF PWR WATER, TEMPERATURE ANDHOLDSJ. Solin, VTT, Espoo, Finland, S. H. Reese, H. E. Karabaki, E.ON Kernkraft GmbH,Hannover, Germany; W. Mayinger, E. ON Kernkraft GmbH, Hanover 30457, Ger-manyPVP2014-28551: UNCERTAINTIES AND MARGINS IN ENVIRONMENTAL FA-TIGUE ANALYSIS RULESC. Faidy, AFCEN, Tassin, FrancePVP2014-28883: COMPARISON BETWEEN ASME CODE-CASE N-761,NUREG/CR-6909 AND STAINLESS STEEL COMPONENT FATIGUE TEST RE-SULTSH. Harrison, R. Gurdal, AREVA Inc., Lynchburg, VA, USAPVP2014-29093: LICENSE RENEWAL ENVIRONMENTAL FATIGUE SCREEN-ING APPLICATIONC. Kupper, M. Gray, Westinghouse Electric Company, Cranberry Township, PA,USASESSION 2.3D (CS-1-3)Tuesday, July 22, 2:00 pm – 3:45 pm, South Tower, Regal RoomTHE JAMES FARR MEMORIAL SYMPOSIUM ON STRUCTURAL INTEGRITYOF PRESSURE COMPONENTS—IIIDeveloped by: Y. Hari, University of North Carolina Charlotte, Charlotte, NC,

USAChair: G. Brar, Guru Nanak Dev Engineering College, Ludhiana, IndiaCo-Chair: M. Rana, Praxair, Tonawanda, NY, USAPVP2014-28347: THE FAILURE EVALUATION AND APPLICATION OF POWERPLANT BOILER MEMBRANE TYPE WATER -WALL BASED ON RISK-BASEDINSPECTIONZ. Yan, Y. Yang, J. Han, J. Si, H. Wang, Shanghai Institute of Special EquipmentInspection and Technical Research, Shanghai, ChinaPVP2014-28913: DEVELOPMENT AND APPLICATION OF RISK-BASED IN-SPECTION IN ETHYLENE COMPRESSION UNITJ. Si, Y. Yang, Z. Yan, X. Luo, Shanghai Institute of Special Equipment Inspectionand Technical Research, Shanghai, ChinaPVP2014-28093: DUCTILE CRACK PROPAGATION SIMULATION OF ACYLINDER WITH A THROUGH-WALL CIRCUMFERENTIAL FLAW UNDER EX-CESSIVE CYCLIC TORSION LOADINGK. Hojo, Mitsubishi Heavy Industries, Inc., Kobe, Japan; D. Watanabe, MitsubishiHeavy Industries, Ltd., Nagasaki, Japan; S. Kawabata, Y. Ametani, Ryoyu SystemTechnology, Kobe, JapanPVP2014-28200: ALTERNATIVE CHARACTERIZATION RULES FOR QUASI-LAMINAR FLAWSV. Lacroix, P. Dulieu, D. Couplet, Tractebel Engineering, Bruxelles, BelgiumSESSION 2.3E (MF-4-6)Tuesday, July 22, 2:00 pm – 3:45 pm, South Tower, Imperial RoomRESIDUAL STRESS MEASUREMENT TECHNIQUESDeveloped by: A. H. Mahmoudi, Bu-Ali Sina University, Hamedan, Iran; P. Gilles,

AREVA, Paris La Defense, FranceChair: A. H. Mahmoudi, Bu-Ali Sina University, Hamedan, IranCo-Chair: P. Gilles, AREVA, Paris La Defense, FrancePVP2014-28209: MEASUREMENT OF RESIDUAL STRESS IN REACTORMOCKUPS CONTAINING DISSIMILAR METAL WELDSA. T. DeWald, Hill Engineering, LLC, Rancho Cordova, CA, USA; M. Hill, Universityof California, Davis, CA, USA; M. Benson, D. Rudland, US Nuclear RegulatoryCommission, Frederick, MD, USAPVP2014-28328: EXPERIMENTAL BIAXIAL RESIDUAL STRESS MAPPINGFOR A DISSIMILAR METAL WELDED NOZZLEM. Hill, M. Olson, University of California, Davis, CA, USA; A. T. DeWald, Hill En-gineering, LLC, Rancho Cordova, CA, USAPVP2014-28864: MEASUREMENT OF RESIDUAL PLASTIC STRAIN DISTRI-BUTION IN DM WELD BY MICRO-HARDNESS MAPPINGX. Yu, D. Qiao, Oak Ridge National Laboratory, Oak Ridge, TN, USA; P. Crooker,Electric Power Research Institute, Palo Alto, CA, USA; S. David, Z. Feng, OakRidge National Laboratory, Oak Ridge, TN, USAPVP2014-28778: A PARAMETRIC STUDY OF RM/T AND WELD REPAIR EF-FECTS ON THROUGH-WALL AXIAL AND HOOP WRS DISTRIBUTIONS INBWR NOZZLE DISSIMILAR METAL WELDSC. Oberembt, Structural Integrity Associates, Inc., Austin, TX, USA; T. Novotny,M. Qin, Structural Integrity Associates, Centennial, CO, USASESSION 2.3F (MF-7-1)Tuesday, July 22, 2:00 pm – 3:45 pm, South Tower, Terrace Room C+DMATERIALS AND TECHNOLOGIES FOR NUCLEAR POWER PLANTS—I

31

Developed by: R. Nanstad, W. Ren, Oak Ridge National Laboratory, Oak Ridge,TN, USA

Chair: R. Nanstad, Oak Ridge National Laboratory, Oak Ridge, TN, USACo-Chair: W. Ren, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2014-28091: PILGRIM STATION STEAM SEPARATOR LIFTING LUG MA-TERIAL EVALUATION AND ANALYSISB. Frew, GE Hitachi Nuclear Energy, Sunol, CA, USA; K. Woods, Entergy NuclearOperations - Pilgrim Station, Plymouth, MA, USA; H. Mehta, GE Hitachi NuclearEnergy, San Jose, CA, USA; H. Gustin, Structural Integrity Associates, Centennial,CO, USA; R. Pace, Entergy Nuclear Generation Co., Plymouth, MA, USAPVP2014-28237: INITIATION AND GROWTH OF SMALL FATIGUE CRACKSOF STEELS USED FOR NUCLEAR POWER PLANTS UNDER LOW CYCLEREGIMES. Hasumuma, T. Ogawa, Aoyama Gakuin University, Sagamihara, Kanagawa,JapanPVP2014-28504: SPECIFICITIES OF WELDING ACTIVITIES IN RCC MP. Malouines, Areva, Paris La Defense, France; B. Lainez, AREVA, Chalons SaintMarcel, France; N. De Mathan, EDF CEIDRE, Saint Denis, France; A. Wasylyk,World Nuclear Association, London, United KingdomPVP2014-28424: PROCESS OPTIMIZATION OF ULTRASONIC SHOT PEEN-ING BY REALISTIC MODELING OF BEADS MOTIONA. Brosse, S. Le Moal, R. Lacroix, P. Mourgue, ESI-France, LYON, France; V.Robin, AREVA NP, Lyon, FranceSESSION 2.3G (CS-16-1)Tuesday, July 22, 2:00 pm – 3:45 pm, North Tower, Grand Ballroom EINTEGRITY ISSUES FOR BURIED PIPE—IDeveloped by: R. McGill, Structural Integrity Associates, San Jose, CA, USA; S.

Xu, Kinectrics, Toronto, ON, CanadaChair: R. McGill, Structural Integrity Associates, San Jose, CA, USACo-Chair: S. Xu, Kinectrics, Toronto, ON, CanadaPVP2014-28249: US NUCLEAR REGULATORY COMMISSION PERSPECTIVEON BURIED AND UNDERGROUND PIPING ISSUES AT NUCLEAR POWERPLANTS IN THE USAD. Alley, US Nuclear Regulatory Commission, Rockville, MD, USAPVP2014-28781: PIPING CORROSION RATE & REMAINING LIFE BASIS:COMMERCIALIZING CONSERVATISM IN FIRST TIME INSPECTIONSG. Cilluffo, Exelon Nuclear Generation, Delta, PA, USAPVP2014-28777: AUTOMATED UT OPTIMIZES INTEGRITY EVALUATIONSFOR UNDERGROUND PIPING INSPECTIONSG. Cilluffo, Exelon Nuclear Generation, Delta, PA, USASESSION 2.3H (HT-2-1)Tuesday, July 22, 2:00 pm – 3:45 pm, North Tower, Grand Ballroom GSTRUCTURAL RESPONSE OF VESSELS AND PIPING DUE TO HIGHLY DY-NAMIC (IMPULSIVE) EVENTSDeveloped by: D. Gross, Dominion Engineering, Reston, VA, USA; E. Ro-

driguez, Global Nuclear Network Analysis, LLC, Corvallis, OR,USA

Chair: D. Gross, Dominion Engineering, Reston, VA, USACo-Chair: E. Rodriguez, Global Nuclear Network Analysis, LLC, Corvallis,

OR, USAPVP2014-28136: EXPERIMENTAL STUDY ON COMPOSITE CONTAINMENTVESSELSQ. Dong, Y. Gu, Institute of Fluid Physics, CAEP, Mianyang, ChinaPVP2014-28197: EXPERIMENTAL DETERMINATION OF THE STATIC EQUIV-ALENT PRESSURES OF DETONATIVE DECOMPOSITIONS OF ACETYLENEIN LONG PIPES AND CHAPMAN-JOUGUET PRESSURE RATIOH.-P. Schildberg, BASF SE, Ludwigshafen, GermanyPVP2014-28319: ON THE ESTIMATION OF DYNAMIC LOAD FACTORS OFTHIN CYLINDRICAL PRESSURE VESSELS IN DEFLAGRATION EVENTSY. Xu, K.-J. Young, Dupont, Wilmington, DE, USAPVP2014-28463: SIMPLIFIED METHODOLOGY FOR ANALYSIS OF RE-FLECTED DETONATION AND DDT—PART 1: ELASTIC ANALYSIST. Ligon, D. Gross, Dominion Engineering, Reston, VA, USA; S. Ahnert, RippleDesign, Philadelphia, PA, USA; J. Minichiello, Bechtel National Inc., Richland,WA, USAPVP2014-28464: SIMPLIFIED METHODOLOGY FOR ANALYSIS OF RE-FLECTED DETONATION AND DDT—PART 2: ELASTIC-PLASTIC RESPONSET. Ligon, D. Gross, Dominion Engineering, Reston, VA, USA; J. Minichiello, Bech-tel National Inc., Richland, WA, USASESSION 2.3I (FSI-9-2)Tuesday, July 22, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom E+FIAEA ACTIVITIES ON FLUID STRUCTURE INTERACTION FOR NUCLEARPOWER PLANTDeveloped by: M. Kim, IAEA, Vienna, Austria; F. Inada, Central Research Insti-

tute of Electric Power Industry, Komae-shi, Tokyo, JapanChair: M. Kim, IAEA, Vienna, Austria

Co-Chair: F. Inada, Central Research Institute of Electric Power Industry,Komae-shi, Tokyo, Japan

PVP2014-28389: DESIGN AND MAINTENANCE IN AN IAEA TECHNICALGUIDELINES ON FLUID-STRUCTURE INTERACTIONF. Inada, Central Research Institute of Electric Power Industry, Komae-shi, Tokyo,Japan; T. Nakamura, Osaka Sangyo University, Daito, Osaka, Japan; T. Nishihara,CRIEPI, Abiko, Chiba, Japan; S. Kaneko, The University of Tokyo, Tokyo, Japan;M. Kim, IAEA, Vienna, AustriaPVP2014-28476: NUCLEAR POWER PLANT ISSUES IN IAEA TECHNICALGUIDELINES ON FLUID-STRUCTURE INTERACTIONSS. Takahashi, Hitachi, Ltd., Hitachi Research Laboratory, Hitachi, Japan; K.Hasegawa, Consultant, Hitachi naka-shi, Japan; T. Nakamura, Osaka SangyoUniversity, Daito, Osaka, JapanPVP2014-28916: AN OVERVIEW OF NUMERICAL METHOD FOR FLUID-STRUCTURE INTERACTIONM. Kim, IAEA, Vienna, Austria; J. H. Jeong, Pusan National University, Pusan,Korea (Republic); P. Hughes, International Atomic Energy Agency, Vienna, Aus-triaPVP2014-29109: AN OVERVIEW OF IAEA TECHNICAL GUIDELINES ONFLUID-STRUCTURE INTERACTIONR. A. Ainsworth, Manchester University, Manchester, United Kingdom; M. Kim,IAEA, Vienna, Austria; P. Hughes, International Atomic Energy Agency, Vienna,AustriaSESSION 2.3J (DA-2-5)Tuesday, July 22, 2:00 pm – 3:45 pm, North Tower, Garden Room 1DESIGN & ANALYSIS OF PIPING & COMPONENTS VDeveloped by: B. Li, AMEC NSS Ltd., Markham, ON, Canada; A. Dweib, Wor-

leyParsons, Atyrau, KazakhstanChair: B. Li, AMEC NSS Ltd., Markham, ON, CanadaCo-Chair: A. Dweib, WorleyParsons, Atyrau, KazakhstanPVP2014-28735: A NEW SIMPLE MECHANICAL MODEL TO DETERMINE UP-HEAVAL BUCKLING OF BURIED SUBMARINE PIPELINESP. Teixeira, M. Gonzalez, Simon Bolivar University, Caracas, Miranda, VenezuelaPVP2014-28985: MULTI-FEEDER STRESS ANALYSIS WITH INTERLINKEDSPACERS FOR A CANDU REACTORB. Li, AMEC NSS Ltd., Markham, ON, Canada; D. Neill, Bruce Power, Tiverton,ON, Canada; D. K. Vijay, AMEC NSS Ltd., Toronto, ON, CanadaPVP2014-29121: EFFECT OF REFLECTION WAVES ON WATER HAMMERLOADSB. Rovagnati, Sargent & Lundy, L.L.C., Chicago, IL, USA; J. H. Gray, Sargent andLundy, Chicago, IL, USAPVP2014-28267: SUSTAINED STRESS INDICES (SSI) IN THE B31.3 2010 EDI-TIONC. Becht IV, Becht Engineering Co., Inc., Morristown, NJ, USA; A. Paulin, PaulinResearch Group, Houston, TX, USA; C. Becht V, Becht Engineering Co., Inc.,Liberty Corner, NJ, USA; W. Lock, Paulin Research Group, Houston, TX, USA;M. Stonehouse, Becht Engineering Co., Inc., Calgary, AB, CanadaSESSION 2.3K (OAC-3-1)Tuesday, July 22, 2:00 pm – 3:45 pm, North Tower, Garden Room 2MONITORING, DIAGNOSTICS AND INSPECTIONDeveloped by: M. Brumovsky, UJV, Rez, Czech Republic; I. Ezekoye, Westing-

house, Cranberry, PA, USAChair: M. Brumovsky, UJV, Rez, Czech RepublicCo-Chair: I. Ezekoye, Westinghouse, Cranberry, PA, USAPVP2014-28248: PIPELINE PARAMETER IDENTIFICATION AND LEAK LO-CALIZATION USING EXPERIMENTAL DATAK. Moustafa, Y. Haik, United Arab Emirates University, Al Ain, United Arab Emir.PVP2014-28725: THE ANALYSIS OF ACOUSTIC EMISSION CODE AND THERESEARCH OF ACOUSTIC EMISSION SIGNAL OF P355NL1 UNDER LOWTEMPERATURE OF -40 CX. Biao, X. Tang, Shanghai Institute of Special Equipment Inspection and TechnicalResearch, Shanghai, China; N. Liang, Shanghai Municipal Bureau of quality andtechnical supervision, Shanghai, China; Y. Jianping, L. Jianrong, Shanghai Insti-tute of Special Equipment Inspection and Technical Research, Shanghai, ChinaPVP2014-28726: AREVA’S MODULARIZED FATIGUE MONITORING FORLIFETIME EXTENSION AND FLEXIBLE PLANT OPERATIONB. Heinz, AREVA GmbH, Erlangen, Germany; D. Wu, AREVA Inc., Santa Clara,CA, USAPVP2014-29102: TRANSIENT AND FATIGUE MONITORING OPERATIONALFEEDBACK APPLICATION AND EVALUATIONT. Meikle V, M. Gray, Westinghouse Electric Company, Cranberry Township, PA,USA; W. Wetmore, SCANA Corporation, Jenkinsville, SC, USASESSION 2.3L (DA-10-4)Tuesday, July 22, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom DPANEL SESSION: PRESSURE BOUNDARY BOLTED JOINTS: INTERNA-TIONAL LIAISON SESSION 1Symposium on Bolting and Bolted Joints—Co-Sponsored by Computer

32

Technology and Bolted Joints, and Design & Analysis Technical Commit-teesDeveloped by: W. Brown, Integrity Engineering Solutions, Dunsborough, WA,

AustraliaChair: W. Brown, Integrity Engineering Solutions, Dunsborough, WA,

AustraliaCo-Chair: R. Noble, 1tegrity Limited, Sunderland, Tyne and Wear, United

KingdomPanelists:W. Brown, Integrity Engineering Solutions, Dunsborough, WA, AustraliaR. Noble, 1tegrity Limited, Sunderland, Tyne and Wear, United KingdomT. Sawa, Hiroshima University, Higashi-hiroshima City, JapanSESSION 2.3M (CS-17-1)Tuesday, July 22, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom CCOMBINATION OF MULTI-AXIAL LOADS IN DESIGN AND FITNESS-FOR-SERVICESymposium on Fitness for Service—Co-Sponsored by Design & Analysis,Materials & Fabrication, High Pressure Technology, and Codes & StandardsTechnical CommitteesDeveloped by: Y. Li, Japan Atomic Energy Agency, Ibaraki-ken, JapanChair: P. Hoang, Sargent & Lundy LLC, Chicago, IL, USACo-Chair: Y. Li, Japan Atomic Energy Agency, Ibaraki-ken, JapanPVP2014-28288: TECHNICAL BASIS FOR APPLICATION OF COLLAPSE MO-MENTS FOR LOCALLY THINNED PIPES SUBJECTED TO TORSION ANDBENDING PROPOSED FOR ASME SECTION XIK. Hasegawa, Consultant, Hitachi naka-shi, Japan; Y. Li, Japan Atomic EnergyAgency, Ibaraki-ken, Japan; B. Bezensek, Shell UK Ltd., Aberdeen, Scotland; P.Hoang, Sargent & Lundy LLC, Chicago, IL, USA; H. Rathbun, Lawrence LivermoreN. L., Pleasanton, CA, USAPVP2014-28791: AN ANALYTICAL SOLUTION FOR PIPING NON-PLANARFLAWSP. Hoang, C. W. Mak, Sargent & Lundy LLC, Chicago, IL, USAPVP2014-28141: RECONSIDERING THE EFFECT OF STRESS BIAXIALITYON PIPE BURST (EFFECT OF AXIAL LOADING ON THE ONSET OF PLASTICINSTABILITY)K. Yoshii, T. Meshii, University of Fukui, Fukui, JapanSESSION 2.3N (FSI-3-6)Tuesday, July 22, 2:00 pm – 3:45 pm, North Tower, Grand Ballroom FFLOW-INDUCED VIBRATION OF STRUCTURAL COMPONENTSDeveloped by: M. J. Pettigrew, Ecole Polytechnique, Montreal, QC, Canada; M.

Hassan, University of Guelph, Guelph, ON, CanadaChair: M. J. Pettigrew, Ecole Polytechnique, Montreal, QC, CanadaCo-Chair: M. Hassan, University of Guelph, Guelph, ON, CanadaPVP2014-28676: UNDERSTANDING DAMPING IN ACOUSTIC AND MECHAN-ICAL SYSTEMSH. Goyder, Cranfield University, Shrivenham, United KingdomPVP2014-28733: NONLINEAR NORMAL MODES AND THE DAHL FRICTIONMODEL PARAMETER IDENTIFICATIONAb. Hadji, N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC, CanadaPVP2014-28803: FLOW INDUCED VIBRATION TESTS OF RESEARCH REAC-TOR FUEL IN THE CHALK RIVER SINGLE CHANNEL TEST RIGV. Janzen, B. Smith, N. Fisher, C. Taylor, T. G. Whan, Atomic Energy of CanadaLimited, Chalk River, ON, CanadaPVP2014-29030: COUPLING VIBRATION INVESTIGATION OF CYCLONESEPARATOR INTERACTED WITH UNSTEADY FLUIDQ. Li, W. Xu, J. Wang, Y. Jin, Y. Guo, China University of Petroleum, Qingdao,ChinaSESSION 2.3O (CS-13-1)Tuesday, July 22, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom BHIGH TEMPERATURE CODES AND STANDARDS—ISymposium on Elevated Temperature and Creep—Co-Sponsored by Design& Analysis, Materials & Fabrication, and Codes & Standards Technical Com-mitteesDeveloped by: N. Kasahara, University of Tokyo, Tokyo, JapanChair: N. Kasahara, University of Tokyo, Tokyo, JapanCo-Chair: K. Nikbin, Imperial College, London, United KingdomPVP2014-28022: CREEP-FATIGUE CRACK INITIATION ASSESSMENTS OFAN INSTRUMENT GUIDE TUBE WITHIN A SUPERHEATER HEADERJ. Shi, AMEC, Gloucester, United Kingdom; H. Dodia, AMEC, Warrington, UnitedKingdomPVP2014-28349: RESEARCH PLAN ON FAILURE MODES BY EXTREMELOADINGS UNDER DESIGN EXTENSION CONDITIONSN. Kasahara, University of Tokyo, Tokyo, Japan; I. Nakamura, National Res Inst,Tsukuba-shi, Ibaraki, Japan; H. Machida, TEPCO Systems Corporation, Tokyo,

Japan; H. Nakamura, ITOCHU Techno-Solutions Corporation, Tokyo, JapanPVP2014-28492: APPLICATION CASE OF RCC-MRX 2012 DESIGN CODE INSIGNIFICANT CREEPY. Lejeail, P. Lamagnere, CEA Cadarache, Saint-Paul lez Durance, France; C.Petesch, T. Lebarbe, P. Matheron, CEA Saclay, Gif-sur-Yvette, FranceSESSION 2.3Q (TW-1-3)Tuesday, July 22, 2:00 pm – 3:45 pm, North Tower, Pacific RoomTECHNICAL TUTORIAL 2: OVERVIEW OF WELDING APPLICATIONS ANDPROCESSES FOR POWER PLANT PIPING AND PRESSURE VESSELSDeveloped by: M. Y. A. Younan, The American University in Cairo, New Cairo,


EgyptPresented by: S. McCracken, EPRI, Harrisburg, NC, USA; R. Smith, Structural

Integrity Associates, Huntersville, NC, USASESSION 2.3S (CT-17-3)Tuesday, July 22, 2:00 pm – 3:45 pm. South Tower, Royal Ballroom FoyerSOFTWARE DEMONSTRATION FORUM IIIDeveloped by: J. Cory, Jr, Siemens PLM Software, Milford, OH, USA

no textBlock 2.4: Tuesday, July 22 (4:00 pm – 5:45 pm)

no textSESSION 2.4A (SE-13-2)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Terrace Room E+FSEISMIC ANALYSIS AND DESIGN OF PIPING SYSTEMS-IIDeveloped by: G. Slagis, G C Slagis Associates, Roseville, CA, USAChair: G. Slagis, G C Slagis Associates, Roseville, CA, USACo-Chair: O. S. Bursi, University of Trento, Trento, ItalyPVP2014-29012: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 3),SEISMIC RESPONSE OF CROSSOVER PIPING FOR SEISMIC ISOLATIONSYSTEMA. Otani, T. Otoyo, IHI Corporation, Yokohama, Japan; H. Hirai, H. Iiizumi, ToshibaCorporation, Yokohama, Kanagawa, Japan; H. Shimizu, Mitsubishi Heavy Indus-tries, Takasago, Hyogo, JapanPVP2014-28675: STUDY ON PIPING RESPONSE UNDER MULTIPLE EXCITA-TION VALIDATION FOR ELASTIC-PLASTIC ANALYSIS OF PIPINGS. Kai, IHI Corporation, Yokohama, Japan; T. Watakabe, Japan Atomic EnergyAgency, Ibaraki, Japan; N. Kaneko, IHI Corporation, Yokohama, Japan; M. Mori-izumi, Japan Atomic Energy Agency, Ibaraki, Japan; K. Tsukimori, Japan AtomicEnergy Agency, Fukui, JapanPVP2014-28851: SEISMIC EVALUATION METHOD OF LOCALLY WALL THIN-NING PIPING SYSTEMS DEFECTED BY LDIM. Sakai, S. Matsuura, Central Research Institute of Electric Power Industry,Abiko, Chiba, Japan; R. Morita, Central Research Institute of Electric Power In-dustry, Iwadokita, Komae, Tokyo, Japan; F. Inada, Central Research Institute ofElectric Power Industry, Komae-shi, Tokyo, Japan; S. Onishi, Chubu E.P., Nagoya,Aichi, JapanPVP2014-28857: INVESTIGATION ON RESTRAINT CAPABILITY OF THE PIPESUPPORT USED AS ANCHOR IN PIPING SYSTEMH. Sodeyama, H. Mizuma, M. Nakatsu, Sanwa Tekki Corporation, Tochigi, JapanSESSION 2.4B (SPC-2-3)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom ASTUDENT PAPER SYMPOSIUM 3Developed by: Y. Kwon, Naval Postgraduate School, Monterey, CA, USA; R. S.


Chair: V. Janzen, Atomic Energy of Canada Limited, Chalk River, ON,Canada

Co-Chair: H. Qian, ALSTOM Power, San Francisco, CA, USAPVP2014-28890: EVALUATION OF MASS TRANSFER COEFFICIENT UNDERSWIRL FLOW GENERATED BY THE COMBINATION OF PIPE ELEMENTS—PART 3 ANALYSIS OF GEOMETRY FACTOR UNDER SWIRL FLOW ON PIPEELEMENTM. Matsushita, K. Yamamoto, T. Nakamura, Osaka University, Osaka, JapanPVP2014-28393: THERMAL STRESS RESPONSE TO BOUNDARY OSCILLA-TION BETWEEN HOT AND COLD FLUID TEMPERATUREK. Soda, T. Mizutani, N. Kasahara, University of Tokyo, Tokyo, JapanPVP2014-28639: DEVELOPMENT OF RISK-BASED INSPECTION EVALUA-TION METHOD FOR LNG PLANT CONSIDERING FAILURE FREQUENCY INOPERATION ENVIRONMENTS.-J. Kang, J. B. Choi, M. Kim, Sungkyunkwan University, Suwon, Korea (Repub-lic)PVP2014-28616: PRESSURE VARIATION IN LOW PRESSURE SIDE OF

33

SHELL AND TUBE HEAT EXCHANGERS AFTER TUBE RUPTUREG. S. Katke, Veermata Jijabai Technological Institute (VJTI), University of Mumbai,Mumbai, India; M. Venkatesh, Larsen and Toubro Ltd., Mumbai, India; N. P. Gul-hane, Veermata Jijabai Technological Institute (VJTI), Mumbai, Mumbai, IndiaSESSION 2.4C (CS-3-4)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Terrace Room A+BENVIRONMENTAL FATIGUE ISSUES (JOINT M&F)—IVSymposium on Fatigue Issues—Co-Sponsored by Codes & Standards, Ma-terials & Fabrication, and Design & Analysis Technical CommitteesDeveloped by: G. Stevens, Office of Nuclear Regulatory Research, Washington,

DC, USA; H. Mehta, GE Hitachi Nuclear Energy, San Jose, CA,USA; S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan

Chair: H. Mehta, GE Hitachi Nuclear Energy, San Jose, CA, USACo-Chair: S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, JapanPVP2014-28573: STUDY ON CONSIDERATION OF SIZE EFFECTS ON DE-SIGN FATIGUE CURVEA. Hirano, Hitachi-GE Nuclear Energy, Ltd., Ibaraki-ken, Japan; M. Nakane, Hi-tachi, Ltd., Hitachi-shi, Ibaraki-ken, Japan; S. Asada, Mitsubishi Heavy Industries,Ltd., Kobe, Japan; T. Sera, Kansai Electric Power Co., Inc., Osaka, JapanPVP2014-28576: FATIGUE EVALUATION UNDER STRAIN RATE CHANGINGCONDITION OF CARBON STEEL IN BWR ENVIRONMENTA. Hirano, S. Mizuta, Hitachi-GE Nuclear Energy, Hitachi-shi, Ibaraki-ken, JapanPVP2014-28601: PROPOSAL OF SURFACE FINISH FACTOR ON FATIGUESTRENGTH IN DESIGN FATIGUE CURVEY. Fukuta, H. Kanasaki, Mitsubishi Heavy Industries, Ltd., Takasago, Japan; S.Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; T. Sera, Kansai ElectricPower Co., Inc., Osaka, JapanPVP2014-28728: ENVIRONMENTAL INFLUENCES ON THE FATIGUE AS-SESSMENT OF AUSTENITIC AND FERRITIC STEEL COMPONENTS INCLUD-ING DISSIMILAR WELDSM. Kammerer, K.-H. Herter, X. Schuler, T. Weissenberg, MPA University Stuttgart,Stuttgart, Germany; A. Roth, AREVA GmbH, Erlangen, GermanySESSION 2.4D (CS-1-4)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Regal RoomTHE JAMES FARR MEMORIAL SYMPOSIUM ON STRUCTURAL INTEGRITYOF PRESSURE COMPONENTS—IVDeveloped by: Y. Hari, University of North Carolina Charlotte, Charlotte, NC,

USAChair: G. Brar, Guru Nanak Dev Engineering College, Ludhiana, IndiaCo-Chair: R. Relangi, Valmet Inc., Charlotte, NC, USAPVP2014-28032; APPLICATION OF ASME PIPING CODE THROUGH ASTRESS ANALYSIS PROCEDURE AND COMPARISON WITH THE ITALIANCODEO. Grisolia, INAIL, Sector of Research, Certification and Testing, Rome, RM, Italy;L. Scano, Studio Scano - Safety & Integrity, Tavagnacco, Udine, UD, ItalyPVP2014-28051: POSSIBLE IMPROVEMENTS IN MULTIPLE AREAS OF APIRP 581S. Thomas, Maaden Phophate Company, Jubail Industrial, Eastern, Saudi Arabia;M. Szidarovszky, ReliaSoft Corporation, Tucson, AZ, USAPVP2014-28067: STUDY OF SAFETY RESERVE FACTOR FOR DEFECT AC-CEPTANCE CRITERIA IN ASME BPV CODEZ. Chen, China Special Equipment Inspection & Research Institute, Beijing, ChinaPVP2014-28081: EVALUATION OF ASME PRESSURE VESSEL CODE PRO-HIBITIONS ON ROD AND BAR STOCK AND POTENTIAL REMEDIESJ. Aumuller, University of Alberta, Edmonton, AB, Canada; V. Carucci, CarmagenEngineering Inc., Florham Park, NJ, USASESSION 2.4E (MF-4-7)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Imperial RoomFE MODELING FOR WELDING SIMULATIONSDeveloped by: P. Gilles, AREVA, Paris La Defense, France; F. Brust, Engineer-

ing Mechanics Corp. of Columbus, Columbus, OH, USAChair: P. Gilles, AREVA, Paris La Defense, FranceCo-Chair: F. Brust, Engineering Mechanics Corp. of Columbus, Columbus,

OH, USAPVP2014-28042: MODELING OF TENSILE RESIDUAL STRESSES EXTEND-ING MORE THAN 5 WELD WIDTHS FROM WELD JOINTW. Mohr, Y.-P. Yang, EWI, Columbus, OH, USAPVP2014-28185: FAST SIMULATION FOR MULTI-PASS WELDING PROCESSUSING ITERATIVE SUBSTRUCTURE METHOD: INVESTIGATION OF OPTI-MIZATION AND EFFICIENT COMPUTATIONA. Maekawa, Institute of Nuclear Safety System, Inc., Fukui, Japan; A. Kawahara,H. Serizawa, H. Murakawa, Osaka University, Osaka, JapanPVP2014-29100: DEVELOPMENT OF SIMPLIFIED EMPIRICAL PHASETRANSFORMATION MODEL FOR USE IN WELDING RESIDUAL STRESSSIMULATIONSN. O’Meara, J. A. Francis, The University of Manchester, Manchester, United King-

dom; S. D. Smith, TWI Ltd., Cambridge, United Kingdom; P. J. Withers, The Uni-versity of Manchester, Manchester, United KingdomPVP2014-29092: RESIDUAL STRESS EVALUATION OF SMALL DIAMETERSTAINLESS STEEL PIPING BY EXPERIMENTAL MEASUREMENTS AND FI-NITE ELEMENT ANALYSIST. Hicks, W. Mabe, J. Miller, Bechtel Marine Propulsion Corporation, West Mifflin,PA, USA; J. Mullen, Bechtel Marine Propulsion Corporation, Schenectady, NY,USASESSION 2.4F (MF-7-2)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Terrace Room C+DMATERIALS AND TECHNOLOGIES FOR NUCLEAR POWER PLANTS—IIDeveloped by: R. Nanstad, W. Ren, Oak Ridge National Laboratory, Oak Ridge,

TN, USAChair: R. Nanstad, Oak Ridge National Laboratory, Oak Ridge, TN, USACo-Chair: W. Ren, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2014-28443: AUTOMATED SYNCHROTRON X-RAY DIFFRACTION OF IR-RADIATED REACTOR PRESSURE VESSEL STEELSD. Sprouster, R. Weidner, T. Anderson, S. Ghose, E. Dooryhee, Brookhaven Na-tional Laboratory, Upton, NY, USAPVP2014-28919: FRACTURE TOUGHNESS ASSESSMENT OF SA508 GR 3STEEL FOR KSNP RPV USING CONVENTIONAL AND BIMODAL MASTERCURVE APPROACHESJ. Kim, M. Kim, K. Choi, B. Lee, Korea Atomic Energy Research Institute, Daejeon,Korea (Republic)PVP2014-28013: HOT ISOSTATIC PRESSING OF A VARYING THICKNESS,THICK-WALLED VESSEL FOR A PWR APPLICATIONJ. Sulley, P. Mitchell, D. Mills, Rolls-Royce, Derby, Derbyshire, United KingdomPVP2014-28040: EFFECT OF PRE-STRAIN ON MECHANICAL PROPERTIESOF PRESSURE VESSEL GRADES—ASSESSMENT OF STRESS RELIEVING/ POST WELD HEAT TREATMENTS EFFICIENCY AT REGENERATING PROP-ERTIESS. Pillot, C. Baudin, D. Heritier, S. Corre, C. Chauvy, Industeel Arcelormittal, LeCreusot, FranceSESSION 2.4G (CS-16-2)Tuesday, July 22, 4:00 pm – 5:45 pm, North Tower, Grand Ballroom EINTEGRITY ISSUES FOR BURIED PIPE—IIDeveloped by: R. McGill, Structural Integrity Associates, San Jose, CA, USA; S.

Xu, Kinectrics, Toronto, ON, CanadaChair: S. Xu, Kinectrics, Toronto, ON, CanadaCo-Chair: R. McGill, Structural Integrity Associates, San Jose, CA, USAPVP2014-28462: TECHNICAL BASIS FOR PROPOSED REVISIONS TO CODECASE N-806, EVALUATION OF METAL LOSS IN CLASS 2 AND 3 METALLICPIPING BURIED IN A BACK-FILLED TRENCHR. McGill, Structural Integrity Associates, San Jose, CA, USA; G. Antaki, BechtEngineering Co., Becht, SC, USA; M. Moenssens, Westinghouse Electric Co.LLC, Pittsburgh, PA, USA; D. Scarth, Kinectrics Inc., Toronto, ON, CanadaPVP2014-28467: COMPARISON OF NUMERICAL METHODS FOR CALCULA-TION OF VERTICAL SOIL PRESSURES ON BURIED PIPING DUE TO TRUCKLOADINGM. Marohl, Sargent & Lundy, Chicago, IL, USAPVP2014-28766: THROUGH-WALL BENDING STRESS EQUATIONS FOR THEDESIGN OF SAFETY-RELATED BURIED PIPINGM. Marohl, Sargent & Lundy, Chicago, IL, USA; M. Moenssens, WestinghouseElectric Co. LLC, Pittsburgh, PA, USASESSION 2.4H (CS-6-1)Tuesday, July 22, 4:00 pm – 5:45 pm, North Tower, Grand Ballroom GAPI 579/ASME CODE FITNESS-FOR-SERVICE ACTIVITIESDeveloped by: P. E. Prueter, The Equity Engineering Group, Inc., Shaker

Heights, OH, USAChair: P. E. Prueter, The Equity Engineering Group, Inc., Shaker

Heights, OH, USACo-Chair: B. Bezensek, Shell UK Limited, Aberdeen, ScotlandPVP2014-28451: PROPOSED MODIFICATIONS TO API 579-1/ASME FFS-12007 FITNESS-FOR-SERVICED. A. Osage, B. Macejko, R. Brown, The Equity Engineering Group, Inc., ShakerHeights, OH, USAPVP2014-28839: TECHNICAL BASIS FOR THE PROPOSED WELD RESIDUALSTRESS GUIDANCE IN API 579-1/ASME FFS-1D. Dewees, Babcock & Wilcox, Barberton, OH, USA; P. E. Prueter, S. R. Kummari,The Equity Engineering Group, Inc., Shaker Heights, OH, USAPVP2014-28843: A CONTINUED EVALUATION OF THE ROLE OF MATERIALHARDENING BEHAVIOR FOR THE NET TG1 AND TG4 SPECIMENSD. Dewees, Babcock & Wilcox, Barberton, OH, USA; P. E. Prueter, S. R. Kummari,The Equity Engineering Group, Inc., Shaker Heights, OH, USAPVP2014-28263: STATUS OF PROPOSED UPDATES TO THE WELD RESIDUALSTRESS GUIDANCE FOR FLAW ASSESSMENTS IN API 579-1/ASME FFS-1

34

D. Dewees, Babcock & Wilcox, Barberton, OH, USA; K. J. Smith, The Equity En-gineering Group, Inc., Shaker Heights, OH, USASESSION 2.4I (FSI-5-1)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom E+FSTRUCTURES UNDER EXTREME LOADING CONDITIONSDeveloped by: S. Jones, University of Alabama, Tuscaloosa, AL, USA; J. Geng,

Baker Engineering and Risk Consultants, Inc., San Antonio, TX,USA; H. Levine, Weidlinger Associates, Inc., Mountain View, CA,USA

Chair: H. Levine, Weidlinger Associates, Inc., Mountain View, CA, USACo-Chair: S. Jones, University of Alabama, Tuscaloosa, AL, USAPVP2014-28015: HIGH STRAIN RATE CONSTITUTIVE MODELING OF PURETITANIUM USING THE TAYLOR IMPACT TESTM. Barkey, S. Jones, H. Ball, The University of Alabama, Tuscaloosa, AL, USA;P. Dong, University of New Orleans, New Orleans, LA, USAPVP2014-28070: FLUID HAMMER AND FATIGUE ANALYSIS FOR OIL TRANS-PORT PIPELINES WITH PEAK POINTSH. Warda, Alexandria University, Alexandria, Egypt; S. Haddara, Ministry of Pe-troleum and Mineral Resources, Cairo, Egypt; E. Wahba, American University ofSharjah, Sharjah, United Arab Emir.PVP2014-28854: BLAST ADJUSTMENT FACTORS FOR ELEVATED VERTI-CAL CYLINDRICAL PVBSJ. Geng, Q. Baker, K. Thomas, Baker Engineering and Risk Consultants, Inc.,San Antonio, TX, USAPVP2014-28704: SIMULATION OF THE DYNAMIC RESPONSE OF A SLOSH-ING LIQUID TO HORIZONTAL MOVEMENTS OF THE TANKA. Brandely, Université de Technologie de Compiègne, Compiegne, France; J.-S. Schotte, Onera, Chatillon, Ile-de-france, France; R. Ohayon, CNAM, Paris,France; E. Lefrancois, B. Hagège, Université de Technologie de Compiègne, Com-piegne, Oise, FrancePVP2014-28742: DROPPED OBJECT IMPACT ANALYSIS OF SUBSEA TREEFRAMEK. Karpanan, C. H. Smith, FMC Technologies, Houston, TX, USASESSION 2.4J (DA-2-4)Tuesday, July 22, 4:00 pm – 5:45 pm, North Tower, Garden Room 1DESIGN & ANALYSIS OF PIPING & COMPONENTS IVDeveloped by: C. Basavaraju, US NRC, Washington, DC, USA; A. Dweib, Wor-

leyParsons, Atyrau, KazakhstanChair: C. Basavaraju, US NRC, Washington, DC, USACo-Chair: A. Dweib, WorleyParsons, Atyrau, KazakhstanPVP2014-28268: EXPERIMENTAL EVALUATION FOR THE MARKL FATIGUEMETHODS AND ASME PIPING STRESS INTENSIFICATION FACTORS (PARTII)W. Lock, A. Paulin, Paulin Research Group, Houston, TX, USA; C. Becht IV, BechtEngineering Co., Inc., Morristown, NJ, USA; C. Becht V, Becht Engineering Co.,Inc., Liberty Corner, NJ, USA; C. Hinnant, K&H Fabricators, Inc., Smithville, TX,USAPVP2014-28338: EVALUATION OF THE NUMERICAL VALIDITY OF THE J PA-RAMETER FOR A CRACK LOCATED ON A MULTI-MATERIAL INTERFACEA. Blouin, S. Chapuliot, AREVA, Paris La Défense, France; W. Hamouche, Uni-versité Pierre et Marie Curie (UPMC), Paris, FrancePVP2014-28426: DUCTILE FRACTURE ANALYSIS UNDER LARGE AMPLI-TUDE CYCLESB. Tranchand, AREVA NP, Paris La Defense, France; V. Aubin, Ecole CentraleParis, Châtenay-Malabry, France; S. Chapuliot, AREVA, Paris La Défense,France; S. Marie, M. Bourgeois, CEA, Gif sur Yvette, FrancePVP2014-28837: STATISTICAL APPROACH OF SCF WITHIN PIPELINE GIRTHWELDSP.-L. Auvret, A. Carlucci, SAIPEM SA, Montigny-le-Bretonneux, France; K. Mcirdi,SAIPEM SA, Versailles, France; J. Li, SAIPEM SA, Montignyle-Bretonneux,FranceSESSION 2.4K (OAC-5-1)Tuesday, July 22, 4:00 pm – 5:45 pm, North Tower, Garden Room 2PUMPS AND VALVESDeveloped by: I. Ezekoye, Westinghouse, Cranberry, PA, USAChair: I. Ezekoye, Westinghouse, Cranberry, PA, USACo-Chair: G. Bezdikian, Georges Bezdikian Consulting Co., Le Vesinet,

FrancePVP2014-28082: DEVELOPMENT OF ENERTECHS ADVANCED NORMALLYOPEN NOZZLECHECK VALVE FOR GENERATION III+ NUCLEAR POWERPLANTSH. Mkrtchyan, Enertech, Brea, CA, USAPVP2014-28095: A COMPARATIVE STUDY OF VALVE NATURAL FRE-QUENCY ESTIMATION USING FINITE ELEMENT ANALYSIS (FEA),RALEIGHS PRINCIPLES AND LABORATORY TESTSI. Ezekoye, Westinghouse, Cranberry, PA, USA; R. S. Farrell, Flowserve, Raleigh,

NC, USA; P. A. Vock, Westinghouse Electric Company, Cranberry Township, PA,USA; R. J. Gradle, Flowserve, Raleigh, NC, USAPVP2014-28384: NUMERICAL MODELING OF TURBULENT CAVITATIONFLOWS IN SAFETY RELIEF VALVESA. Couzinet, L. Gros, Centre Technique des Industries Mécaniques, Nantes,France; J. Pinho, von Karman for Fluid Dynamics Institute, Brussels, Belgium; S.Chabane, D. Pierrat, Centre Technique des Industries Mécaniques, Nantes,FrancePVP2014-28509: THE HYDRAULIC DESIGN OF INLET TWISTED GUIDE VANEAND PERFORMANCE EXPERIMENTAL RESEARCH ON PRE-WHIRL REGU-LATION IN A CENTRIFUGAL PUMP (Presentation Only)H. Hou, Y. Zhang, Z. Li, Z. Wang, Y. Tian, China University of Petroleum, Beijing,ChinaPVP2014-28180: IMPROVING GLOBE VALVE RELIABILITY (PresentationOnly)S. McJones, BP Products North America Inc., Rancho Palos Verdes, CA, USASESSION 2.4L (DA-10-5)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom DPANEL SESSION: PRESSURE BOUNDARY BOLTED JOINTS: INTERNA-TIONAL LIAISON SESSION 2Symposium on Bolting and Bolted Joints—Co-Sponsored by ComputerTechnology and Bolted Joints, and Design & Analysis Technical Commit-teesDeveloped by: W. Brown, Integrity Engineering Solutions, Dunsborough, WA,

AustraliaChair: W. Brown, Integrity Engineering Solutions, Dunsborough, WA,

AustraliaCo-Chair: R. Noble, 1tegrity Limited, Sunderland, Tyne and Wear, United

KingdomPanelists:W. Brown, Integrity Engineering Solutions, Dunsborough, WA, AustraliaH. Lejeune, CETIM, Nantes, FranceJ. Veiga, Teadit Industria e Comercio Ltda, Rio de Janeiro, RJ, BrazilManfred Schaaf, AMTEC Services GmbH, Lauffen, GermanySESSION 2.4M (DA-8-1)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom CFITNESS FOR SERVICE EVALUATIONS & POST CONSTRUCTION ISSUES 1Symposium on Fitness for Service—Co-Sponsored by Design & Analysis,Materials & Fabrication, High Pressure Technology, and Codes & StandardsTechnical CommitteesDeveloped by: T. Seipp, Becht Engineering, Calgary, AB, Canada; M. Zhao,

Chevron, Houston, TX, USA; C. Rodery, BP p.l.c., League City,TX, USA

Chair: C. Rodery, BP p.l.c., League City, TX, USACo-Chair: T. Seipp, Becht Engineering, Calgary, AB, Canada; M. Zhao,

Chevron, Houston, TX, USAPVP2014-28958: WRITING AND REVIEWING FEA REPORTS SUPPORTINGASME SECTION VIII, DIVISION 1 AND 2 DESIGNS—PRACTICAL CONSIDER-ATIONS AND RECOMMENDED GOOD PRACTICET. Seipp, Becht Engineering, Calgary, AB, Canada; M. Stonehouse, Becht Engi-neering Co., Inc., Calgary, AB, CanadaPVP2014-28138: STRESS ANALYSIS OF BULGES IN CYLINDRICAL ANDOVAL PRESSURE VESSELSM. Samman, Houston Engineering Solutions, LLC, Houston, TX, USA; M. Sam-man, University of Texas at Austin, Austin, TX, USAPVP2014-28211: REPAIRING CORROSION DAMAGE THE SMART WAY: ASTORY OF VESSEL REDEMPTIONM. Turnquist, Quest Integrity Group, Boulder, CO, USA; G. Brown, Quest IntegrityGroup, Broomfield, CO, USAPVP2014-28139: COMPARISON OF STRESS AND STRAIN ANALYSIS TECH-NIQUES FOR ASSESSMENT OF BULGES IN COKE DRUMSM. Samman, Houston Engineering Solutions, LLC, Houston, TX, USA; E. B.Tinoco, F. D. Marangone, Petrobras, Rio de Janeiro, BrazilSESSION 2.4N (FSI-3-7)Tuesday, July 22, 4:00 pm – 5:45 pm, North Tower, Grand Ballroom FFSI MODELING AND DYNAMICS OF SUBMERGED STRUCTURESDeveloped by: N. Mureithi, Ecole Polytechnique De Montreal, Montreal, QC,

Canada; T. Nakamura, Osaka Sangyo University, Daito, Osaka,Japan; D. Brochard, CEA, Gif sur Yvette, France; T. Taniguchi,Tottori University, Tottori, Japan

Chair: N. Mureithi, Ecole Polytechnique De Montreal, Montreal, QC,Canada

Co-Chair: T. Nakamura, Osaka Sangyo University, Daito, Osaka, JapanPVP2014-28654: EXPERIMENTAL STUDY FOR FIV CHARACTERISTICS OFTAINTER GATES WITH INCREASED OPENING (INSTANTANEOUS FLOW-

35

RATE COEFFICIENTS FROM PRESSURE MEASUREMENTS)K. Anami, Ashikaga Inst of Technology, Ashikaga, Tochigi, Japan; N. Ishii, OsakaElectro Comm University, Osaka, Japan; T. Oku, Mayekawa Company Ltd.,Moriya, Ibaraki, Japan; C. Knisely, Bucknell University, Lewisburg, PA, USA; T.Tsuji, Osaka Electro-Communication University, Neyagawa, Osaka, JapanPVP2014-28814: FLOW-INDUCED VIBRATION OF AN ELASTICALLY-MOUNTED CYLINDER UNDERGOING FORCED ROTATIONK. W. L. Wong, Monash University, Melbourne, Victoria, Australia; D. Lo Jacono,Institut de Mecanique des Fluides de Toulouse, Toulouse, France; J. Sheridan,Monash University, Melbourne, Victoria, AustraliaPVP2014-28357: IMPLEMENTATION OF A STRUCTURAL-ACOUSTIC HO-MOGENIZED METHOD FOR THE DYNAMIC ANALYSIS OF A TUBE BUNDLEWITH FLUID STRUCTURE INTERACTION MODELING IN ABAQUS : FORMU-LATION AND APPLICATIONSE. Veron, J.-F. Sigrist, DCNS Research, La Montagne, France; D. Broc, CEASaclay, Gif-sur-Yvette, FrancePVP2014-28918: PHYSICAL AND NUMERICAL METHODS FOR THE DY-NAMIC BEHAVIOR OF THE FAST REACTOR CORESD. Broc, J. Cardolaccia, CEA, Gif sur Yvette, France; L. Martin, CEA Cadarache,Saint Paul lez Durance, FranceSESSION 2.4O (CS-13-2)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom BHIGH TEMPERATURE CODES AND STANDARDS—IISymposium on Elevated Temperature and Creep—Co-Sponsored by Design& Analysis, Materials & Fabrication, and Codes & Standards Technical Com-mitteesDeveloped by: Y. Lejeail, CEA Cadarache, Saint-Paul lez Durance, FranceChair: Y. Lejeail, CEA Cadarache, Saint-Paul lez Durance, FranceCo-Chair: C. M. Davies, Imperial College London, London, United KingdomPVP2014-28538: DEVELOPMENT OF A MATERIAL DATABOOK FOR API STD530M. Prager, Welding Research Council, New York, NY, USA; D. A. Osage, R.Brown, C. Panzarella, The Equity Engineering Group, Inc., Shaker Heights, OH,USAPVP2014-28797: REVIEW AND DEVELOPMENT OF PRIMARY LOAD ELE-VATED TEMPERATURE DESIGN RULESD. Dewees, Babcock & Wilcox, Barberton, OH, USA; B. Hantz, Valero EnergyCorporation, San Antonio, TX, USAPVP2014-28905: CRACK-TIP STRESS FIELD OF FULLY CIRCUMFERENTIALCRACKED PIPE UNDER COMBINED TENSION AND THERMAL LOADSJ. Je, D. Kim, K.-H. Bae, Y. Kim, Korea University, Seoul, Korea (Republic)SESSION 2.4Q (TW-1-10)Tuesday, July 22, 4:00 pm – 5:45 pm, North Tower, Pacific RoomTECHNICAL TUTORIAL 2 OVERVIEW OF WELDING APPLICATIONS ANDPROCESSES FOR POWER PLANT PIPING AND PRESSURE VESSELS PARTIIDeveloped by: M. Y. A. Younan, The American University in Cairo, New Cairo,


EgyptPresented by: S. McCracken, EPRI, Harrisburg, NC, USA; R. Smith, Structural

Integrity Associates, Huntersville, NC, USASESSION 2.4S (CT-17-4)Tuesday, July 22, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom FoyerSOFTWARE DEMONSTRATION FORUM IVDeveloped by: J. Cory, Jr, Siemens PLM Software, Milford, OH, USA

WEDNESDAY, JULY 23, 2014no text

Block 3.1: Wednesday, July 23 (8:30 am – 10:15 am)no text

SESSION 3.1A (CT-10-1)Wednesday, July 23, 8:30 am – 10:15 am, South Tower, Terrace Room E+FNEW AND EMERGING METHODS OF ANALYSIS AND APPLICATIONSDeveloped by: Y. H. Park, New Mexico State University, Las Cruces, NM, USAChair: Y. H. Park, New Mexico State University, Las Cruces, NM, USACo-Chair: C. Jones, W.L. Gore & Associates, Elkton, MD, USAPVP2014-28340: PALLADIUM HYDRIDE ATOMIC POTENTIALS FOR HYDRO-GEN STORAGE/SEPARATIONY. H. Park, New Mexico State University, Las Cruces, NM, USA; I. Hijazi, MarshallUniversity, Huntington, WV, USAPVP2014-28940: THE EFFECT OF AREA ON THE EN13555 STRESS RELAX-ATION (PQR) PROPERTIES OF AN ADVANCED EPTFE GASKET TAPED. C. Bissett, W.L. Gore & Associates, GmbH, Putzbrunn, Germany; C. Jones,

W.L. Gore & Associates, Elkton, MD, USAPVP2014-28117: SIMPLIFIED DEVELOPMENT METHOD OF FEA CODE FORSLOSHING OF FLOATING ROOF TANKS (LAGRANGIAN FORMULATIONFOR AXISYMMETRIC LINEAR PROBLEM)S. Yoshida, Yokohama National University, Yokohama, JapanPVP2014-29090: OPTIMAL MAKE-UP TORQUE FOR TRAPEZOIDALTHREADED CONNECTIONS SUBJECTED TO COMBINED AXIAL TENSIONAND INTERNAL PRESSURE LOADINGT. Galle, W. De Waele, Ghent University, Zwijnaarde, East-Flanders, Belgium; J.Van Wittenberghe, ArcelorMittal Global R&D Gent, Zwijnaarde, East-Flanders,Belgium; P. De Baets, Ghent University, Zwijnaarde, East-Flanders, BelgiumSESSION 3.1B (SPC-2-4)Wednesday, July 23, 8:30 am – 10:15 am, South Tower, Royal Ballroom ASTUDENT PAPER SYMPOSIUM 4Developed by: Y. Kwon, Naval Postgraduate School, Monterey, CA, USA; R. S.


Chair: H. Qian, ALSTOM Power, San Francisco, CA, USACo-Chair: V. Janzen, Atomic Energy of Canada Limited, Chalk River, ON,

CanadaPVP2014-28360: THE EFFECTS OF IN-PLANE AND OUT-OF-PLANE DIMEN-SIONS OF CURVED WIDE PLATE ON CRACK-TIP CONSTRAINT FORPIPELINE FRACTURE ASSESSMENTH. Lee, N.-S. Huh, Seoul National University of Science and Technology, Seoul,Seoul, Korea (Republic); K. Kim, Research Institute of Industrial Science & Tech-nology POSCO Global R&D Center, Incheon, Korea (Republic)PVP2014-28598: ESTIMATION OF J-INTEGRAL RANGE FOR TYPE SUS304STAINLESS STEEL PLATE IN CREEP-FATIGUE TESTS AT HIGH TEMPERA-TUREM. Funai, O. Watanabe, A. Matsuda, Tsukuba University, Tsukuba, Ibaraki, JapanPVP2014-28474: EFFECT OF THE NONLINEARITY OF RUBBER BEARINGSON A SEISMIC ISOLATED STRUCTURE CONSIDERING THEIR LAYOUTS. Chirez, S. Fujita, Tokyo Denki University, Tokyo, Japan; K. Minagawa, SaitamaInstitute of Technology, Saitama, Fukaya, JapanPVP2014-28610: WAVE PROPAGATION OF WATER HAMMER IN COMPOUNDTUBE WITH RECTANGULAR CROSS SECTIONK. Takeda, K. Inaba, K. Takahashi, Tokyo Institute of Technology, Tokyo, JapanSESSION 3.1C (DA-3-1)Wednesday, July 23, 8:30 am – 10:15 am, South Tower, Terrace Room A+BFATIGUE DESIGNSymposium on Fatigue Issues—Co-Sponsored by Codes & Standards, andDesign & Analysis Technical CommitteesDeveloped by: P. Gilles, AREVA, Paris La Defense, FranceChair: P. Gilles, AREVA, Paris La Defense, FranceCo-Chair: J. Rudolph, AREVA GmbH, Erlangen, GermanyPVP2014-28764: A COMPARISON OF THE DETERMINISTIC AND PROBA-BILISTIC ASPECTS OF THE ASME III FATIGUE EVALUATION PROCEDURESC. Watson, Rolls-Royce, Derby, United Kingdom; D. Beardsmore, AMEC, War-rington, United Kingdom; K. Wright, Rolls-Royce Plc, Derby, United KingdomPVP2014-28633: ASME III FATIGUE ASSESSMENT PLASTICITY CORREC-TION FACTORS FOR AUSTENITIC STAINLESS STEELSJ. Emslie, C. Watson, Rolls-Royce, Derby, United Kingdom; K. Wright, Rolls-RoycePlc, Derby, United KingdomPVP2014-28409: STATISTICAL ANALYSES OF HIGH-CYCLE FATIGUEFRENCH DATA FOR AUSTENITIC SSG. Blatman, EDF R&D Renardières Site, Moret-Sur-Loing, France; T. Métais, S.Cambier, Electricite de France, Villeurbanne, France; J.-C. Le Roux, EDF R&D,Moret sur Loing, FrancePVP2014-28378: A NOVEL HIGH CYCLE FATIGUE ASSESSMENT OF SMALL-BORE SIDE BRANCHES: TAILOR-MADE ACCEPTABLE VIBRATION LEVELSBASED ON THE REMAINING LIFE OF EXISTING STRUCTURESP. Van Beek, R. Pijpers, TNO, Delft, Netherlands; K. Macdonald, Statoil, Sta-vanger, Norway; J. Maljaars, TNO, Delft, Netherlands; K. Lunde, Statoil, Sta-vanger, NorwaySESSION 3.1D (CS-4-1)Wednesday, July 23, 8:30 am – 10:15 am, South Tower, Regal RoomINTERACTION AND FLAW MODELING FOR MULTIPLE FLAWS (JOINT M&F)Developed by: F. Iwamatsu, Hitachi, Ltd., Ibaraki, Japan; J. Sharples, AMEC

Clean Energy Europe, Warrington, Cheshire, United Kingdom;B. Bezensek, Shell UK Limited, Aberdeen, Scotland

Chair: J. Sharples, AMEC Clean Energy Europe, Warrington, Cheshire,United Kingdom

Co-Chair: B. Bezensek, Shell UK Limited, Aberdeen, ScotlandPVP2014-28159: EVALUATION OF SUBSURFACE CRACK PROPAGATIONUNDER FATIGUER. Serizawa, M. Kikuchi, S. Yamada, Tokyo University of Science, Noda, Japan

36

PVP2014-28477: INTERNAL CRACK GROWTH SIMULATION USING S-VER-SION FEMM. Kikuchi, S. Yamada, R. Serizawa, Tokyo University of Science, Noda, Japan;L. Yulong, Northwestern Polytechnical University, Xian, ChinaPVP2014-28513: BENCHMARK ANALYSIS ON PROBABILISTIC FRACTUREMECHANICS ANALYSIS CODES CONSIDERING MULTIPLE CRACKS ANDCRACK INITIATION IN AGED PIPINGY. Li, Japan Atomic Energy Agency, Ibaraki-ken, Japan; K. Osakabe, Mizuho In-formation & Research Institute, Inc., Chiyoda-ku, Tokyo, Japan; G. Katsumata, J.Katsuyama, K. Onizawa, Japan Atomic Energy Agency, Naka, Ibaraki, JapanPVP2014-28568: SIMPLIFIED LIMIT LOAD ANALYSIS FOR MULTIPLE CIR-CUMFERENTIAL FLAWS IN PIPEF. Iwamatsu, Hitachi, Ltd., Ibaraki, Japan; K. Saito, Hitachi-GE Nuclear Energy,Ltd., Ibaraki, JapanPVP2014-28892: EVALUATION OF DUCTILE FRACTURE BEHAVIOR USINGGTN MODELH. Takazawa, F. Iwamatsu, K. Miyazaki, Hitachi Ltd., Ibaraki-ken, JapanSESSION 3.1E (MF-4-8)Wednesday, July 23, 8:30 am – 10:15 am, South Tower, Imperial RoomIMPACT OF RESIDUAL FIELDS ON COMPONENT LIFEDeveloped by: F. Brust, Engineering Mechanics Corp. of Columbus, Columbus,

OH, USA; D. Rudland, US Nuclear Regulatory Commission,Frederick, MD, USA

Chair: F. Brust, Engineering Mechanics Corp. of Columbus, Columbus,OH, USA

Co-Chair: D. Rudland, US Nuclear Regulatory Commission, Frederick, MD,USA

PVP2014-28030: WELD RESIDUAL STRESS INPUTS FOR A PROBABILISTICFRACTURE MECHANICS CODEM. Benson, NRC, Rockville, MD, USA; F. Brust, R. Kurth, Engineering MechanicsCorp. of Columbus, Columbus, OH, USA; J. E. Broussard, Dominion EngineeringInc., Reston, VA, USAPVP2014-28144: COMPARISON OF WELDING RESIDUAL STRESSES ANDBRITTLE FRACTURE BETWEEN LOW AND HIGH HEAT-INPUT 70 MM THICKWELDS (Presentation Only)W. Woo, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic); G.-B. An, POSCO Steel, Pohang, Korea (Republic)PVP2014-28737: EFFECT OF IN PLANE AND OUT OF PLANE BENDING ONWELD RESIDUAL STRESSESE. Bonnaud, J. Gunnars, Inspecta Technology AB, Stockholm, SwedenPVP2014-29015: OVERVIEW OF WELDING RESEARCH UNDER THE NEWNUCLEAR MANUFACTURING (NNUMAN) PROGRAMMEB. Jeyaganesh, M. Callaghan, J. A. Francis, The University of Manchester, Man-chester, United Kingdom; P. D. English, A. Vasileiou, University of Manchester,Manchester, United KingdomSESSION 3.1F (CS-28-1)Wednesday, July 23, 8:30 am – 10:15 am, South Tower, Terrace Room C+DNDE PERSONNEL QUALIFICATION (PQ) IDeveloped by: H. Stephens, EPRI, Charlotte, NC, USA; W. Springer, University

of Arkansas, Fayetteville, AR, USAChair: H. Stephens, EPRI, Charlotte, NC, USACo-Chair: W. Springer, University of Arkansas, Fayetteville, AR, USAPVP2014-28885: IMPLEMENTATION OF THE ASME NONDESTRUCTIVE EX-AMINATION AND QUALITY CONTROL CENTRAL QUALIFICATION AND CER-TIFICATION PROGRAM STANDARD ANDE-1-2013L. Mullins, ZETEC, North Adams, MA, USAPVP2014-28994: ANDE-1—AN ASME NONDESTRUCTIVE EXAMINATIONAND QUALITY CONTROL QUALIFICATION AND CERTIFICATION NATIONALSTANDARD (Presentation Only)M. Turnbow, Consultant, Chattanooga, TN, USAPVP2014-28673: INTERNATIONAL NDE PERSONNEL CERTIFICATION RE-QUIREMENTS AND INDUSTRIAL BEST PRACTICES (Presentation Only)A. Wasylyk, World Nuclear Association, London, United Kingdom; P. Malouines,Areva, Paris La Defense, FranceSESSION 3.1G (DA-4-1)Wednesday, July 23, 8:30 am – 10:15 am, North Tower, Grand Ballroom EINELASTIC, NONLINEAR AND LIMIT LOAD ANALYSISSymposium on Non-Linear Analysis—Co-Sponsored by Computer Technol-ogy & Bolted Joints, and Design & Analysis Technical CommitteesDeveloped by: D. Vlaicu, Ontario Power Generation, Pickering, ON, Canada; S.

McGuffie, Porter McGuffie, Inc., Lawrence, KS, USAChair: S. McGuffie, Porter McGuffie, Inc., Lawrence, KS, USACo-Chair: D. Vlaicu, Ontario Power Generation, Pickering, ON, CanadaPVP2014-28536: GROSS PLASTIC DEFORMATION OF A PIPE BEND UNDERINTERNAL PRESSURE AND IN AND OUT OF PLANE BENDING—A STUDYON THE SENSITIVITY OF THE FINITE ELEMENT MODELS

A. Bhattacharya, S. Bapat, CB&I UK LTD., London, United KingdomPVP2014-28666: LOCAL LIMIT LOAD ANALYTICAL MODEL FOR THICK-WALLED PIPE WITH AXIAL SURFACE DEFECTS. Ageiev, I. Orynyak, S. Radchenko, M. Zarazovskii, IPP-Centre Ltd., Kyiv,UkrainePVP2014-28670: LOCAL AND GLOBAL REFERENCE STRESS FOR CIRCUM-FERENTIAL IRREGULAR-SHAPED DEFECTS IN PIPESS. Ageiev, I. Orynyak, S. Radchenko, IPP-Centre Ltd., Kiev, UkrainePVP2014-28759: A STUDY ON DEVELOPMENT OF OPTIMUM FE ANALYSISMODEL ON WELDING STRESS ANALYSIS FOR CEDM PENETRATION NOZ-ZLET.-Y. Ryu, J. B. Choi, Sungkyunkwan University, Suwon, Gyeonggi-do, Korea (Re-public); K. S. Lee, Korea Hydro and Nuclear Power Co. Ltd., Daejeon, Korea (Re-public)SESSION 3.1H (HT-4-1)Wednesday, July 23, 8:30 am – 10:15 am, North Tower, Grand Ballroom GNDE AND FITNESS FOR SERVICE OF HIGH-PRESSURE VESSELSSymposium on Fitness for Service—Co-Sponsored by Design & Analysis,Materials & Fabrication, High Pressure Technology, and Codes & StandardsTechnical CommitteesDeveloped by: J. Keltjens, SABIC, Geleen, NetherlandsChair: J. Keltjens, SABIC, Geleen, NetherlandsCo-Chair: R. Wink, Uhde High Pressure Tech Gmbh, Hagen, GermanyPVP2014-28127: TUBE RUPTURE STUDY OF A 300 BAR HEAT EXCHANGERB. Megens, SABIC, Geleen, NetherlandsPVP2014-28109: THE USE OF FFS METHODOLOGIES FOR DETERMININGTHE RESIDUAL LIFE OF A HIGH PRESSURE AUTOCLAVE REACTORJ. Keltjens, SABIC, Geleen, NetherlandsPVP2014-28752: A REMAINING LIFE ASSESSMENT OF AUTOFRETTAGEDTUBES FROM AN LDPE FACILITYJ. Cochran, C. Panzarella, The Equity Engineering Group, Shaker Heights, OH,USASESSION 3.1I (SE-6-5)Wednesday, July 23, 8:30 am – 10:15 am, South Tower, Royal Ballroom E+FSPECIAL SESSION I [DEVELOPMENT OF AN EVALUATION METHOD FORSEISMIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES]Developed by: O. Furuya, Tokyo City University, Tokyo, JapanChair: S. Fujita, Tokyo Denki University, Tokyo 101-8457, JapanCo-Chair: O. Furuya, Tokyo City University, Tokyo, JapanPVP2014-29002: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 6),SCALED TESTS TO OBTAIN BASIC CHARACTERISTICS OF LEAD RUBBERBEARINGT. Hirotani, R. Takahama, Shimizu Corporation, Tokyo, Japan; M. Yukawa,Obayashi Corporation, Tokyo, Japan; H. Hibino, Taisei Corporation, Yokohama,Kanagawa, Japan; Y. Aikawa, Taisei Corporation, Shinjuku-ku, Tokyo, JapanPVP2014-29040: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 10),EVALUATION OF SEISMIC ISOLATOR DESIGNH. Asano, Obayashi Corporation, Tokyo-to, Japan; T. Hirotani, Shimizu Corpora-tion, Tokyo, Japan; T. Nakayama, Kajima Corporation, Tokyo, Japan; T. Norimono,Takenaka Corporation, Japan; Y. Aikawa, Taisei Corporation, Shinjuku-ku, Tokyo,JapanPVP2014-29000: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 11), IM-PROVEMENT OF THE SEISMIC ISOLATOR DESIGN METHODY. Aikawa, Taisei Corporation, Shinjuku-ku, Tokyo, Japan; H. Hibino, Taisei Cor-poration, Yokohama, Kanagawa, Japan; Y. Umeki, Chubu Electric Power Co., Inc.,Nagoya, Aichi, Japan; Y. Takeuchi, Obayashi Corporation, Minato-ku, Tokyo,Japan; S. Asahara, Takenaka Corporation, Koto-ku, Tokyo, JapanSESSION 3.1J (DA-2-3)Wednesday, July 23, 8:30 am – 10:15 am North Tower, Garden Room 1DESIGN & ANALYSIS OF PIPING & COMPONENTS IIIDeveloped by: A. Dweib, WorleyParsons, Atyrau, Kazakhstan; B. Li, AMEC NSS

Ltd., Markham, ON, CanadaChair: A. Dweib, WorleyParsons, Atyrau, KazakhstanCo-Chair: B. Li, AMEC NSS Ltd., Markham, ON, CanadaPVP2014-28265: BURST TESTS OF B16.9 WELDING TEESM. Stonehouse, Becht Engineering Co., Inc., Calgary, AB, Canada; A. Paulin,Paulin Research Group, Houston, TX, USA; C. Becht V, Becht Engineering Co.,Inc., Liberty Corner, NJ, USA; C. Becht IV, Becht Engineering Co., Inc., Morris-town, NJ, USAPVP2014-28401: EFFECT OF SPECIMEN GEOMETRY ON THE MECHANICALBEHAVIOR OF POLYETHYLENE PIPE MATERIALT. Ali El-Bagory, Helwan University, Cairo, Egypt; T. Alkanhal, Majmaah University,Majmaah, Saudi Arabia; M. Y. A. Younan, The American University in Cairo, New

37

Cairo, EgyptPVP2014-28838: EXPERIMENTAL AND ANALYTICAL STUDY FOR COL-LAPSE CHARACTERISTICS OF 45 DEG CYLINDER-TO-CYLINDER INTER-SECTIONSS. Kataoka, T. Sato, T. Honda, M. Takeda, T. Tanimoto, JGC Corporation, Yoko-hama, Kanagawa, JapanPVP2014-28920: ON PIPE ELBOW ELEMENTS IN ABAQUS AND BENCH-MARK TESTSL. Zeng, L. Jansson, Y. Venev, ÅF-Industry, Göteborg, SwedenSESSION 3.1K (OAC-8-1)Wednesday, July 23, 8:30 am – 10:15 am, North Tower, Garden Room 2PLANT LIFE EXTENSION: AGING AND LIFE MANAGEMENTDeveloped by: G. Bezdikian, Georges Bezdikian Consulting Co., Le Vesinet,

FranceChair: G. Bezdikian, Georges Bezdikian Consulting Co., Le Vesinet,

FranceCo-Chair: G. Young, Entergy Services Inc., Russellville, AR, USAPVP2014-28212: MAI BENCHMARK CAMPAIGN OF INTERNATIONAL SOFT-WARE FOR REACTOR PRESSURE VESSEL INTEGRITY ASSESSMENTE. Dautreme, J.-P. Fontes, E. Remy, K. Aubert, R. Sueur, Electricite de France,Chatou, FrancePVP2014-28224: LICENSE RENEWAL AND SUBSEQUENT LICENSE RE-NEWAL IN THE U.S.G. Young, Entergy Services Inc., Russellville, AR, USAPVP2014-28305: EXTENDING REPLACEMENT INTERVALS OF ELAS-TOMERIC COMPONENTS BY EVALUATING SAMPLES REMOVED FROMSERVICEJ. Marchesi, W. McBrine, V. Roy, Altran Solutions Corp., Boston, MA, USAPVP2014-28765: PROBABILISTIC PRESSURIZED THERMAL SHOCKSANALYSIS FOR A REACTOR PRESSURE VESSELG. Qian, M. Niffenegger, Paul Scherrer Institut, Villigen, SwitzerlandSESSION 3.1L (DA-10-1)Wednesday, July 23, 8:30 am – 10:15 am, South Tower, Royal Ballroom DEXTREME LOADING AND DESIGN CONSIDERATIONS FOR BOLTED JOINTDESIGN AND OPERATIONSymposium on Bolting and Bolted Joints—Co-Sponsored by ComputerTechnology and Bolted Joints, and Design & Analysis Technical Commit-teesDeveloped by: W. Brown, Integrity Engineering Solutions, Dunsborough, WA,

Australia; R. Noble, 1tegrity Limited, Sunderland, Tyne and Wear,United Kingdom

Chair: W. Brown, Integrity Engineering Solutions, Dunsborough, WA,Australia

Co-Chair: R. Noble, 1tegrity Limited, Sunderland, Tyne and Wear, UnitedKingdom

PVP2014-28261: BOLTED CLASS300 FLANGE BEHAVIOR AT HIGH TEMPER-ATURESA. Mann, J. Hilsabeck, C. McKoon, C. N. Jackson, Emerson Process Manage-ment, Marshalltown, IA, USAPVP2014-28956: CASE STUDY: FAILURE ANALYSIS OF A BFJ IN CYCLICSERVICET. Seipp, Becht Engineering, Calgary, AB, CanadaPVP2014-28304: SAFETY ASSESSMENT OF LID SYSTEMS OF TRANSPORTPACKAGES FOR RADIOACTIVE MATERIALS BY USE OF FINITE ELEMENTANALYSESK. Linnemann, V. Ballheimer, J. Sterthaus, Frank Wille, BAM Federal Institute forMaterials Research and Testing, Berlin, GermanyPVP2014-28366: RCC-MRX EDITION 2012 BOLT DESIGN RULES CRITERIAC. Borazzo, Areva NP, Lyon, France; C. Petesch, T. Lebarbe, O. Ancelet, CEA,Gif-sur-Yvette, FranceSESSION 3.1M (DA-8-2)Wednesday, July 23, 8:30 am – 10:15 am, South Tower, Royal Ballroom CFITNESS FOR SERVICE EVALUATIONS & POST CONSTRUCTION ISSUES 2Symposium on Fitness for Service—Co-Sponsored by Design & Analysis,Materials & Fabrication, High Pressure Technology, and Codes & StandardsTechnical CommitteesDeveloped by: T. Seipp, Becht Engineering, Calgary, AB, Canada; M. Zhao,

Chevron, Houston, TX, USA; C. Rodery, BP p.l.c., League City,TX, USA

Chair: T. Seipp, Becht Engineering, Calgary, AB, CanadaCo-Chair: M. Zhao, Chevron, Houston, TX, USA; C. Rodery, BP p.l.c.,

League City, TX, USAPVP2014-28019: THE ROLE OF WELD PROCESSING ON THE INTEGRITYASSESSMENT OF BIMETALLIC GIRTH WELDSG. Testa, N. Bonora, University of Cassino and Southern Lazio, Cassino, Italy; A.

Carlucci, SAIPEM SA, Montigny-le-Bretonneux, France; A. Ruggiero, Universityof Cassino, Cassino, Frosinone, Italy; G. Iannitti, Techdyn Engineering, Rome,ItalyPVP2014-28071: BRITTLE FRACTURE ASSESSMENTS ON OFFSHOREPSVSK. Subramanian, Stress Engineering Services, Kenner, LA, USA; J. Penso, ShellProjects and Technology, Cypress, TX, USA; H. Pordal, Stress Engineering Serv-ices, Mason, OH, USA; G. Garic, Stress Engineering Srvc Inc., Metairie, LA, USA;G. McVinnie, Shell Exploration & Production Co., New Orleans, LA, USAPVP2014-28256: DEVELOPING AN ENGINEERING BASED INTEGRITY MAN-AGEMENT PROGRAM FOR PIPING, PIPELINE, AND PLANT EQUIPMENTC. Alexander, J. Bedoya, Stress Engineering Services, Inc., Houston, TX, USASESSION 3.1N (FSI-3-8)Wednesday, July 23, 8:30 am – 10:15 am, North Tower, Grand Ballroom FCFD TECHNIQUES IN FSI/FIV IDeveloped by: C. Meskell, Trinity College Dublin, Dublin, Ireland; J.-F. Sigrist,

DCNS Research, La Montagne, FranceChair: C. Meskell, Trinity College Dublin, Dublin, IrelandCo-Chair: N. Mureithi, Ecole Polytechnique De Montreal, Montreal, QC,

CanadaPVP2014-28452: NUMERICAL CHARACTERIZATION OF THE AREA PERTUR-BATION AND TIMELAG FOR A VIBRATING TUBE SUBJECTED TO CROSS-FLOWS. El Bouzidi, M. Hassan, L. L. Fernandes, University of Guelph, Guelph, ON,Canada; A. Mohany, University of Ontario Institute, Oshawa, ON, CanadaPVP2014-28457: DEVELOPMENT OF A NUMERICAL MODEL FOR QUASI-PERIODIC FORCES OF TWO-PHASE CROSS FLOW IN TUBE BUNDLESS. Zoghlami, C. Beguin, S. Étienne, École Polytechnique de Montréal, Montreal,QC, CanadaPVP2014-28369: LARGE-EDDY SIMULATION OF CROSS-FLOW INDUCEDVIBRATIONS OF A SINGLE FLEXIBLE TUBE IN A NORMAL SQUARE TUBEARRAYJ. Berland, E. Deri, A. Adobes, EDF R&D, Chatou, FrancePVP2014-28629: CFD MODELLING OF A CHOKE VALVE UNDER CRITICALWORKING CONDITIONSS. Malavasi, G. V. Messa, Politecnico di Milano, Milano, ItalySESSION 3.1O (DA-7-1)Wednesday, July 23, 8:30 am – 10:15 am, South Tower, Royal Ballroom BTHERMAL STRESSES & ELEVATED TEMPERATURE DESIGN 1Symposium on Elevated Temperature and Creep—Co-Sponsored by Design& Analysis, Materials & Fabrication, and Codes & Standards Technical Com-mitteesDeveloped by: A. Segall, Pennsylvania State University, University Park, PA,

USAChair: A. Segall, Pennsylvania State University, University Park, PA,

USACo-Chair: S. Iyer, Candu Energy, Mississauga, ON, CanadaPVP2014-28199: NUMERICAL ASSESSMENT OF CONTAINMENT CAPABIL-ITY OF TRANSPORT PACKAGES UNDER REGULATORY THERMAL TESTCONDITIONSJ. Sterthaus, V. Ballheimer, C Bletzer, K. Linnemann, M. Nehrig, BAM Federal In-stitute for Materials Research and Testing, Berlin, GermanyPVP2014-28607: MANUFACTURE TRIAL OF CREEP TEST MACHINE FORPLATE-TYPE SPECIMENO. Watanabe, M. Funai, A. Matsuda, Tsukuba University, Tsukuba, Ibaraki, JapanPVP2014-28683: BUCKLING BEHAVIORS OF METALLIC COLUMNS UNDERCOMPRESSIVE LOAD AT EXTREMELY HIGH TEMPERATURESB. Jo, W. Sagawa, K. Okamoto, University of Tokyo, Tokyo, JapanPVP2014-28739: THERMO-MECHANICAL NUMERICAL ANALYSIS IN STEELPLATES BUTT WELDEDM. Martinez, Central University of Venezuela, Caracas, Venezuela; M. Gonzalez,Simon Bolivar University, Caracas, Miranda, Venezuela; A. Barragan, Central Uni-versity of Venezuela, Caracas, VenezuelaPVP2014-28997: TWO AXISYMMETRIC MODELS APPLICATION FOR FASTAND CONSERVATIVE ANALYSIS OF COLD PLUMES IN RPV AT PTS CONDI-TIONA. Batura, A. Bogdan, I. Orynyak, S. Radchenko, IPP-Centre Ltd., Kyiv, Ukraine

no textBlock 3.2: Wednesday, July 23 (10:30 am – 12:15 pm)

no textSESSION 3.2A (MF-2-1)Wednesday, July 23, 10:30 am – 12:15 pm, South Tower, Terrace Room E+FAPPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT—IDeveloped by: P.-S. Lam, Savannah River National Laboratory, Aiken, SC, USAChair: P.-S. Lam, Savannah River National Laboratory, Aiken, SC, USA

38

Co-Chair: A. Duncan, Savannah River National Laboratory, Aiken, SC, USAPVP2014-28239: INVESTIGATION ON THE INTRINSIC PLASTICITY OF GRA-DIENT NANO-GRAINED AISI 304 STAINLESS STEEL TREATED BY ULTRA-SONIC IMPACT TREATMENTX. Yang, X. Ling, S. Yang, S. Lu, Nanjing Tech University, Nanjing, ChinaPVP2014-28317: DUCTILE FRACTURE ASSESSMENT OF PLATES UNDERBIAXIAL LOADINGC. Meek, R. A. Ainsworth, University of Manchester, Manchester, United KingdomPVP2014-28336: AN EXPERIMENTAL STUDY OF DUCTILE FAILURE UNDERMULTI-AXIAL LOADINGW. Lu, H. Jin, Sandia National Laboratories, Livermore, CA, USAPVP2014-28933: CREEP ANALYSIS AND CONSTRAINT EFFECT IN A CEN-TER-CRACKED PLATE UNDER BIAXIAL LOADINGZ. Wang, Y. Zhang, Jiangsu University, Zhenjiang, Jiangsu, China; P.-S. Lam, Sa-vannah River National Laboratory, Aiken, SC, USA; Y. J. Chao, Tianjin University,Tianjin, ChinaSESSION 3.2B (CS-21-1)Wednesday, July 23, 10:30 am – 12:15 pm, South Tower, Royal Ballroom AFATIGUE MONITORING AND RELATED ASSESSMENT METHODS IDeveloped by: J. Rudolph, B. Heinz, S. Bergholz, AREVA GmbH, Erlangen, Ger-

manyChair: S. H. Reese, E.ON Kernkraft GmbH, Hannover, GermanyCo-Chair: T. Gilman, Structural Integrity Associates, Inc., San Jose, CA,

USAPVP2014-28100: FATIGUE MONITORING APPROACHES FOR POWERPLANTSJ. Rudolph, S. Bergholz, B. Jouan, AREVA GmbH, Erlangen, GermanyPVP2014-28178: AN APPROACH FOR A STATISTICAL EVALUATION OF UN-CERTAINTY IN ASSESSING FATIGUE USAGE INCLUDING ENVIRONMENTALEFFECTSY. Garud, SIMRAND, LLC, San Jose, CA, USA; D. Steininger, K. Wolfe, EPRI,Palo Alto, CA, USAPVP2014-28191: NUMERICAL APPROACH FOR THE CONSIDERATION OFHOLD TIME EFFECTSS. H. Reese, E.ON Kernkraft GmbH, Hannover, Germany; J. Seichter, Siem-pelkamp Pruef- und Gutachter-Ges. mbH, Dresden, Germany; D. Klucke, H. E.Karabaki, W. Mayinger, E.ON Kernkraft GmbH, Hannover, GermanyPVP2014-28657: TREND PROGNOSIS AND ONLINE DIAGNOSTICS OFTHICK WALLED BOILER COMPONENTS FOR A FLEXIBLE MODE OF OPER-ATIONJ. Wagner, P. Deeskow, STEAG Energy Services GmbH, Essen, GermanyPVP2014-28716: FATIGUE ASSESSMENT OF NPP COMPONENTS USING RE-ALISTIC THERMAL-MECHANICAL LOAD HISTORIESJ. Rudolph, AREVA GmbH, Erlangen, Germany; J. E. Maneschy, EletrobrasEletronuclear, Rio De Janeiro, Brazil; F. M. S. Costa, B. Silva, J. Luiz PUC-Rio,Rio de Janeiro, BrazilSESSION 3.2C (DA-3-2)Wednesday, July 23, 10:30 am – 12:15 pm, South Tower, Terrace Room A+BCOMPLEX FATIGUE LOADINGSSymposium on Fatigue Issues—Co-Sponsored by Codes & Standards, andDesign & Analysis Technical CommitteesDeveloped by: S. Courtin, AREVA, Paris La Defense, FranceChair: C. Watson, Rolls-Royce, Derby, United KingdomCo-Chair: A. Carlucci, SAIPEM SA, Montigny-le-Bretonneux, FrancePVP2014-28279: INFLUENCE OF MEAN STRAIN ON FATIGUE LIFE OFSTAINLESS STEEL (EFFECT OF CONSTANT AND RATCHETING MEANSTRAIN)M. Kamaya, Inst of Nuclear Safety System, Mikata-gun Fukui, JapanPVP2014-28421: EQUI-BIAXIAL LOADING EFFECT ON AUSTENITIC STAIN-LESS STEEL FATIGUE LIFES. Bradai, C. Gourdin, CEA, Gif sur Yvette, France; S. Courtin, AREVA, Paris LaDefense, France; J.-C. Le Roux, EDF R&D, Moret sur Loing, France; C. Gardin,ENSMA, Poitiers, FrancePVP2014-28787: FATIGUE BEHAVIOUR OF SEAM WELDS—EXPERIMENTALINVESTIGATION AND NUMERICAL SIMULATIONJ. Rudolph, AREVA GmbH, Erlangen, Germany; K. Langschwager, A. Bosch, A.Scholz, M. Oechsner, Technical University of Darmstadt, Darmstadt, GermanyPVP2014-28379: APPLICATION OF ADVANCED FATIGUE DAMAGE PARAM-ETERS IN COMPARISON WITH FATIGUE ANALYSIS INCLUDED IN CODESAND STANDARDSX. Schuler, K.-H. Herter, P. Rettenmeier, University of Stuttgart, Stuttgart, Ger-many; T. M. Fesich, R. Bosch GbmH, Stuttgart, GermanyPVP2014-28891: FATIGUE LIFE OF BWR FEEDWATER NOZZLES CONSID-ERING ACTUAL PLANT TRANSIENTSM. Walter, Structural Integrity Associates, Inc., Centennial, CO, USA; T. Gilman,Structural Integrity Associates, Inc., San Jose, CA, USA; K. Evon, Structural In-tegrity Associates, Centennial, CO, USA

SESSION 3.2D (CS-27-1)Wednesday, July 23, 10:30 am – 12:15 pm, South Tower, Regal RoomINTERNATIONAL SESSION FOR FAST REACTOR DESIGN AND CONSTRUC-TIONDeveloped by: T. Asayama, Japan Atomic Energy Agency, Ibaraki-ken, Japan;

T. Lebarbe, CEA, Gif sur Yvette, FranceChair: T. Lebarbe, CEA, Gif sur Yvette, FranceCo-Chair: S. Okajima, Japan Atomic Energy Agency, Oarai-machi, Higashi-

ibaraki-gun, Ibaraki Pref., JapanPVP2014-28485: CONSISTENCY BETWEEN EVOLUTION OF CODIFIEDRULES AND SFR PROTOTYPE DEVELOPMENT: ASTRID AND RCC-MRX EX-AMPLEC. Petesch, CEA Saclay, Gif-sur-Yvette, France; M. Blanc, CEA, Saint Paul lezdurances, France; T. Lebarbe, CEA, Gif sur Yvette, France; M. Blat, EDF, Moretsur Loing, France; O. Gelineau, Areva, Lyon, FrancePVP2014-28689: MATERIAL STRENGTH EVALUATION FOR 60 YEARS DE-SIGN IN JAPANESE SODIUM FAST REACTORY. Nagae, T. Onizawa, S. Takaya, T. Yamashita, Japan Atomic Energy Agency,Ibaraki, JapanPVP2014-28853: DEVELOPMENT OF STRUCTURAL CODES FOR JSFRBASED ON THE SYSTEM BASED CODE CONCEPTT. Asayama, T. Wakai, Japan Atomic Energy Agency, Ibaraki-ken, Japan; M. Ando,Japan Atomic Energy Agency, Fukui, Japan; S. Okajima, Y. Nagae, Japan AtomicEnergy Agency, Ibaraki, JapanPVP2014-28875: PROPOSAL OF THE SCREENING METHOD FOR PREVEN-TION OF THE ACCUMULATION OF THE RATCHETING STRAIN DERIVEDFROM THE MOVEMENT OF THE TEMPERATURE DISTRIBUTIONS. Okajima, T. Wakai, Japan Atomic Energy Agency, Ibaraki-ken, Japan; M. Ando,Japan Atomic Energy Agency, Fukui, Japan; Y. Inoue, Ascend Co., Ltd., Ibaraki,Japan; S. Watanabe, Mitsubishi FBR Systems, Tokyo, JapanPVP2014-28324: DESIGN RULES FOR RATCHETING DAMAGE IN AFCENRCC-MRX 2012 CODEP. Lamagnere, Y. Lejeail, CEA Cadarache, Saint-Paul lez Durance, France; C.Petesch, T. Lebarbe, P. Matheron, CEA Saclay, Gif-sur-Yvette, FranceSESSION 3.2F (CS-28-2)Wednesday, July 23, 10:30 am – 12:15 pm, South Tower, Terrace Room C+DPANEL SESSION: NDE PERSONNEL QUALIFICATION (PQ) IIDeveloped by: H. Stephens, EPRI, Charlotte, NC, USA; W. Springer, University

of Arkansas, Fayetteville, AR, USAChair: H. Stephens, EPRI, Charlotte, NC, USACo-Chair: M. Turnbow, Consultant, Chattanooga, TN, USAPanelists:H. Stephens, EPRI, Charlotte, NC, USASESSION 3.2G (DA-4-2)Wednesday, July 23, 10:30 am – 12:15 pm, North Tower, Grand Ballroom ENONLINEAR CYCLIC ANALYSIS, SHAKEDOWN AND RATCHETINGSymposium on Non-Linear Analysis—Co-Sponsored by Computer Technol-ogy & Bolted Joints, and Design & Analysis Technical CommitteesDeveloped by: D. Vlaicu, Ontario Power Generation, Pickering, ON, Canada; S.

McGuffie, Porter McGuffie, Inc., Lawrence, KS, USAChair: D. Vlaicu, Ontario Power Generation, Pickering, ON, CanadaCo-Chair: S. McGuffie, Porter McGuffie, Inc., Lawrence, KS, USAPVP2014-28214: SHAKEDOWN BOUNDARY OF A 90 DEGREE BACK-TO-ACK PIPE BEND SUBJECTED TO STEADY INTERNAL PRESSURES ANDCYCLIC OUT-OF-PLANE BENDING MOMENTSH. Abdalla, The British University in Egypt, Cairo, EgyptPVP2014-28253: SIMULATION OF THE CREEP AND FATIGUE DAMAGES INHIGH-CR STEEL COMPONENTS BASED ON A MODIFIED BECKER-HACK-ENBERG MODELJ. Wang, P. Steinmann, Friedrich-Alexander-University Erlangen-Nuremberg, Er-langen, Germany; J. Rudolph, A. Willuweit, AREVA GmbH, Erlangen, GermanyPVP2014-28278: THE TRANSIENT STRESS AND LIFE ANALYSIS OF A GUNTUBEX. Cheng, Nanjing University of Science and Technology, Nanjing, China; Y. Wu,Huaiyin Institute of Technology, Huaian, Jiangsu, China; X. Guan, Nanjing Uni-versity of Science and Technology, Nanjing, Jiangsu, ChinaPVP2014-28714: FURTHER DEVELOPMENT OF THE NON-LOCAL DAMAGEMODEL OF ROUSSELIER FOR THE TRANSITION REGIME OF FRACTURETOUGHNESS AND DIFFERENT STRESS STATESS. Gehrlicher, M. Seidenfuss, X. Schuler, University of Stuttgart, Stuttgart, Ger-manyPVP2014-28963: APPLICATION OF GURSON MODEL TO DIFFERENT CON-STRAINT SPECIMENSD. Watanabe, Mitsubishi Heavy Industries, Ltd., Nagasaki, Japan; K. Hojo, Mit-subishi Heavy Industries, Inc., Kobe, Japan

39

SESSION 3.2H (HT-5-1)Wednesday, July 23, 10:30 am – 12:15 pm, North Tower, Grand Ballroom GDESIGN AND ANALYSIS OF HIGH-PRESSURE EQUIPMENT FOR THE OIL &GAS EXPLORATION AND PRODUCTIONDeveloped by: N. McKie, FMC Technologies, Houston, TX, USAChair: N. McKie, FMC Technologies, Houston, TX, USACo-Chair: K. C. Simpson, ExxonMobil, Baton Rouge, LA, USAPVP2014-28665: FATIGUE CAPACITY OF STEEL CYLINDRICAL BODIES ANDCONDUITS SUBJECTED TO CYCLIC PRESSUREA. Wormsen, FMC Technologies, Kongsberg, Norway; F. Kirkemo, Statoil, Tranby,Norway; A. D. Muff, FMC Technologies, Kongsberg, NorwayPVP2014-28712: STRUCTURAL DESIGN OF METALLIC COMPONENTS INISO 13628-7F. Kirkemo, Statoil, Tranby, NorwayPVP2014-28722: LOCAL FAILURE ANALYSIS OF HPHT SUBSEA TREE COM-PONENTS DUE TO TRIAXIAL STRESSK. Karpanan, W. Thomas, FMC Technologies, Houston, TX, USAPVP2014-29103: CASE STUDY ON A COMPLEX SEAL DESIGN FOR A HIGHPRESSURE VESSEL APPLICATIONA. Slee, S. Hardy, D. Gethin, Swansea University, Swansea, Wales, United King-dom; J. Stobbart, Freudenberg Oil & Gas Technologies, Port Talbot, United King-domSESSION 3.2I (SE-6-6)Wednesday, July 23, 10:30 am – 12:15 pm, South Tower, Royal Ballroom E+FSPECIAL SESSION II [DEVELOPMENT OF AN EVALUATION METHOD FORSEISMIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES]Developed by: O. Furuya, Tokyo City University, Tokyo, JapanChair: O. Furuya, Tokyo City University, Tokyo, JapanCo-Chair: S. Fujita, Tokyo Denki University, Tokyo 101-8457, JapanPVP2014-29009: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 7),BREAKING TEST PLAN AND DEVELOPMENT OF TEST MACHINE FORFULL-SCALE LEAD RUBBER BEARINGSS. Kosugi, T. Imaoka, Hitachi-GE Nuclear Energy, Ltd., Hitachi, Ibaraki, Japan; H.Tsudome, Hitachi, Ltd., Japan; K. Kanazawa, Central Research Institute of ElectricPower Industry, Abiko, Chiba, Japan; N. Sato, Kajima Corporation, Tokyo, Tokyo,Japan;PVP2014-29006: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 8),FUNDAMENTAL PROPERTIES OF FULL-SCALE LEAD RUBBER BEARINGSBASED ON BREAKING TESTN. Sato, Kajima Corporation, Tokyo, Tokyo, Japan; T. Kaneko, Kajima Corporation,Chofu-shi, Tokyo, Japan; S. Nagata, Central Research Institute of Electric PowerIndustry, Abiko, Chiba, Japan; T. Imaoka, K. Kurihara, Hitachi-GE Nuclear Energy,Ltd., Hitachi-shi, Ibaraki-ken, JapanPVP2014-29001: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 9), UL-TIMATE PROPERTIES OF FULL-SCALE LEAD RUBBER BEARINGS BASEDON BREAKING TESTT. Hiraki, S. Nagata, K. Kanazawa, Central Research Institute of Electric PowerIndustry, Abiko, Chiba, Japan; T. Imaoka, Hitachi-GE Nuclear Energy, Ltd., Hitachi,Ibaraki, Japan; T. Nakayama, Kajima Corporation, Tokyo, JapanSESSION 3.2K (MF-17-1)Wednesday, July 23, 10:30 am – 12:15 pm, North Tower, Garden Room 2PROBABILISTIC ASSESSMENT OF FAILUREDeveloped by: K. Nikbin, Imperial College, London, United KingdomChair: K. Nikbin, Imperial College, London, United KingdomCo-Chair: D. G. Harlow, Lehigh University, Bethlehem, PA, USAPVP2014-28114: LOW CYCLE FATIGUE: PROBABILITY AND STATISTICALMODELING OF FATIGUE LIFED. G. Harlow, Lehigh University, Bethlehem, PA, USAPVP2014-28150: PROBABILISTIC FRACTURE ANALYSIS OF CIRCUMFER-ENTIALLY CRACKED PIPESR. Bhimanadam, F. Blom, NRG, Petten, NetherlandsPVP2014-28877: UNCERTAINTY CHARACTERIZATION OF ENGINEERINGFAILURE DATAZ. Wei, Tenneco, Grass Lake, MI, USA; K. Nikbin, Imperial College, London,United KingdomPVP2014-28880: THE UNDERLYING DRIVING FORCES OF MULTIPLE-MODAL STATISTICAL BEHAVIORZ. Wei, Tenneco, Grass Lake, MI, USA; D. G. Harlow, Lehigh University, Bethle-hem, PA, USA; K. Nikbin, Imperial College, London, United KingdomPVP2014-29118: THE EFFECTS OF MAINTENANCE ACTIONS ON THEPDFAVG OF SPRING OPERATED PRESSURE RELIEF VALVESJ. V. Bukowski, Villanova University, Villanova, PA, USA; W. M. Goble, exida, LLC,Sellersville, PA, USA; R. Gross, Savannah River Site, North Augusta, SC, USA;S. P. Harris, Savannah River National Laboratory, Aiken, SC, USA

SESSION 3.2L (DA-10-3)Wednesday, July 23, 10:30 am – 12:15 pm, South Tower, Royal Ballroom DBOLTED JOINT ASSEMBLY AND OPERATION CONSIDERATIONSSymposium on Bolting and Bolted Joints—Co-Sponsored by ComputerTechnology and Bolted Joints, and Design & Analysis Technical Commit-teesDeveloped by: W. Brown, Integrity Engineering Solutions, Dunsborough, WA,

Australia; R. Noble, 1tegrity Limited, Sunderland, Tyne and Wear,United Kingdom

Chair: R. Noble, 1tegrity Limited, Sunderland, Tyne and Wear, UnitedKingdom

Co-Chair: W. Brown, Integrity Engineering Solutions, Dunsborough, WA,Australia

PVP2014-28685: HYDRAULIC TENSIONER ASSEMBLY: LOAD LOSS FAC-TORS AND TARGET STRESS LIMITSW. Brown, Integrity Engineering Solutions, Dunsborough, WA, AustraliaPVP2014-28980: ANALYSIS AND TESTING OF A RING JOINT FLANGEC. A. Hay, ExxonMobil, Baton Rouge, LA, USA; W. Brown, Integrity EngineeringSolutions, Dunsborough, WA, AustraliaPVP2014-28174: BREECH LOCK EXCHANGERS, OBTAINING LEAK FREEPERFORMANCED. Reeves, Sealing and Bolting Technology LLC, Orinda, CA, USA; D. Clover, Ad-vanced Sealing, Cerritos, CA, USAPVP2014-28824: HOT BOLTING: TOO HOT TO HANDLE? (Presentation Only)R. Noble, 1tegrity Limited, Sunderland, Tyne and Wear, United KingdomSESSION 3.2M (DA-8-3)Wednesday, July 23, 10:30 am – 12:15 pm, South Tower, Royal Ballroom CFITNESS FOR SERVICE EVALUATIONS & POST CONSTRUCTION ISSUES 3Symposium on Fitness for Service—Co-Sponsored by Design & Analysis,Materials & Fabrication, High Pressure Technology, and Codes & StandardsTechnical CommitteesDeveloped by: T. Seipp, Becht Engineering, Calgary, AB, Canada; C. Rodery,

BP p.l.c., League City, TX, USA; M. Zhao, Chevron, Houston,TX, USA

Chair: M. Zhao, Chevron, Houston, TX, USACo-Chair: T. Seipp, Becht Engineering, Calgary, AB, Canada; C. Rodery,

BP p.l.c., League City, TX, USAPVP2014-28528: STRESS INTENSIFICATION FACTORS FOR UNREIN-FORCED ELBOW BRANCH CONNECTIONS IN OLD CARBON-STEELPIPELINESL. Scano, Studio Scano - Safety & Integrity, Udine, ItalyPVP2014-28696: FAILURE ANALYSIS OF BURNER MUFFLE IN SHELL GASI-FIERW. Liu, J. Shi, Chinese Special Equipment Inspection and Research Institute, Bei-jing, China; Q. Chen, SINOPEC Hubei Chemical Fertilizer Company, Zhijiang City,China; G. Xie, Y. Zhou, Chinese Special Equipment Inspection and Research In-stitute, Beijing, ChinaPVP2014-28755: TÜV NORD CONCEPT LOOP—LIFETIME OPTIMIZATION OFPIPELINESR. Trieglaff, C. Schrandt, A. Schulz, TUEV NORD SysTec GmbH & Co KG, Ham-burg, Germany; M. Schulz, IGN Ingenieurgesellschaft Nord mbh & Co. KG, Greif-swald, GermanyPVP2014-28804: A DISCUSSION OF CONSERVATISM IN FITNESS FORSERVICE ASSESSMENTS INVOLVING ENVIRONMENTALLY ASSISTEDCRACKING (PRESENTATION ONLY)C. Scott, Enbridge, Edmonton, AB, CanadaSESSION 3.2N (FSI-3-9)Wednesday, July 23, 10:30 am – 12:15 pm, North Tower, Grand Ballroom FAEROELASTICITY / AERODYNAMICS & ENERGY HARVESTINGDeveloped by: E. de Langre, Ecole Polytechnique, Palaiseau, France; C.

Meskell, Trinity College Dublin, Dublin, Ireland; J. Horácek, In-stitute of Thermomechanics, Prague, Czech Republic; A. Mo-hany, University of Ontario Institute, Oshawa, ON, Canada; P.Oshkai, University of Victoria, Victoria, BC, Canada

Chair: J. Horácek, Institute of Thermomechanics, Prague, Czech Re-public

Co-Chair: C. Meskell, Trinity College Dublin, Dublin, IrelandPVP2014-28205: ENERGY HARVESTING USING VORTEX-INDUCED VIBRA-TIONS OF A HANGING CABLEC. Grouthier, S. Michelin, Ecole Polytechnique, Palaiseau, France; Y. Modarres-Sadeghi, University of Massachussets, Amherst, MA, USA; E. de Langre, EcolePolytechnique, Palaiseau, FrancePVP2014-28244: STUDY ON POWER GENERATION USING UNSTABLE EN-ERGY BY IN-FLOW FLUIDELASTIC VIBRATIONT. Sumitani, S. Hagiwara, T. Nakamura, Osaka Sangyo University, Daito, Osaka,Japan

40

PVP2014-28387: INVESTIGATION ON PARAMETRICALLY EXCITED MO-TIONS OF POINT ABSORBERS IN REGULAR WAVESK. Tarrant, C. Meskell, Trinity College Dublin, Dublin, IrelandPVP2014-28939: FLOW-INDUCED TRANSVERSE VIBRATION OF A CAN-TILEVERED PRISM FOR ENERGY HARVESTINGT. Kiwata, M. Yamaguchi, T. Kono, T. Ueno, A. Nakajima, Kanazawa University,Kanazawa, JapanSESSION 3.2O (DA-7-2)Wednesday, July 23, 10:30 am – 12:15 pm, South Tower, Royal Ballroom BTHERMAL STRESSES & ELEVATED TEMPERATURE DESIGN 2Symposium on Elevated Temperature and Creep—Co-Sponsored by Design& Analysis, Materials & Fabrication, and Codes & Standards Technical Com-mitteesDeveloped by: S. Iyer, Candu Energy, Mississauga, ON, CanadaChair: S. Iyer, Candu Energy, Mississauga, ON, CanadaCo-Chair: A. Segall, Pennsylvania State University, University Park, PA,

USAPVP2014-28545: ESTIMATION OF GRAPHITE DUST PRODUCTION IN A PEB-BLE-BED TYPE NUCLEAR REFLECTORJ.-H. Kang, E. S. Kim, Korea Atomic Energy Research Institute, Daejeon, Korea(Republic); S. Cho, National Fusion Research Institute, Daejeon, Korea (Repub-lic)PVP2014-28698: PREDICTION OF STRESS RELAXATION BEHAVIOR OF2.25CR-1MO-0.25V STEEL BASED ON CONTINUUM DAMAGE MECHANICSY. Zhou, X. Chen, Z. Fan, Y. Han, Hefei General Machinery Research Institute,Hefei, ChinaPVP2014-29051: ANALYSIS ON ULTIMATE LOAD CAPACITY OF CYLINDERWITH LOCAL DISCONTINUITY UNDER HIGH TEMPERATURE GRADIENTY. Li, J. Zhu, S. Bao, Z. Gao, Zhejiang University of Technology, Hangzhou, ChinaPVP2014-29078: CREEP ANALYSIS OF HEMISPHERE SHELL STRUCTUREUNDER HIGH TEMPERATURE GRADIENTJ. Zhu, S. Bao, Y. Li, Z. Gao, Zhejiang University of Tech, Hangzhou, China

THURSDAY, JULY 24, 2014no text

Block 4.1: Thursday, July 24 (8:30 am – 10:15 am)no text

SESSION 4.1A (MF-2-2)Thursday, July 24, 8:30 am – 10:15 am, South Tower, Terrace Room E+FAPPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT—IIDeveloped by: J. Wang, Oak Ridge National Laboratory, Oak Ridge, TN, USAChair: H. Jiang, Oak Ridge National Laboratory, Oak Ridge, TN, USACo-Chair: A. Duncan, Savannah River National Laboratory, Aiken, SC, USAPVP2014-28087: STUDY OF SAFETY MARGIN FOR ELONGATED DEFECTACCEPTANCE CRITERIA IN ASME BPV CODE VIII-1/2Z. Chen, China Special Equipment Inspection & Research Institute, Beijing, ChinaPVP2014-28990: A FRAMEWORK TO DEVELOP FLAW ACCEPTANCE CRI-TERIA FOR STRUCTURAL INTEGRITY ASSESSMENT OF MULTIPURPOSECANISTERS FOR EXTENDED STORAGE OF USED NUCLEAR FUELP.-S. Lam, R. Sindelar, A. Duncan, T. Adams, Savannah River National Laboratory,Aiken, SC, USAPVP2014-29067: THE IMPACT OF INTERFACIAL BONDING EFFICIENCY ONHIGH-BURNUP USED NUCLEAR FUEL VIBRATION INTEGRITYH. Jiang, J. Wang, H. Wang, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2014-29117: REVERSIBLE BENDING FATIGUE TESTING SYSTEM DE-SIGN CONCEPTS FOR SPENT FUEL VIBRATION INTEGRITY STUDYH. Jiang, J. Wang, H. Wang, Oak Ridge National Laboratory, Oak Ridge, TN, USASESSION 4.1C (DA-3-3)Thursday, July 24, 8:30 am – 10:15 am, South Tower, Terrace Room A+BFATIGUE CRACK GROWTHSymposium on Fatigue Issues—Co-Sponsored by Codes & Standards, andDesign & Analysis Technical Committeeseveloped by: P. Gilles, AREVA, Paris La Defense, FranceChair: M. Takanashi, IHI Corporation, Yokohama, JapanCo-Chair: L. De Baglion, AREVA SAS, Paris La Défense, FrancePVP2014-28411: THERMAL AND MECHANICAL FATIGUE LOADING—MECH-ANISMS OF CRACK INITIATION AND CRACK GROWTHS. Utz, E. Soppa, C. Kohler, H. Silcher, X. Schuler, University of Stuttgart, Stuttgart,GermanyPVP2014-28188: EFFECT OF SPECIMEN SIZE ON ELASTIC-PLASTIC FA-TIGUE CRACK GROWTH AND RESISTANCE CURVE OF CARBON STEELJ. Ikegami, Aoyama Gakuin University, Sagamihara, Kanagawa, Japan; M.Taniguchi, M. Takanashi, IHI Corporation, Yokohama, Kanagawa, Japan; S. Ha-sumuma, T. Ogawa, Aoyama Gakuin University, Sagamihara, Kanagawa, Japan

PVP2014-28060: EFFECT OF CUTTING METHOD ON FATIGUE CRACK INI-TIATION AND FATIGUE LIFE OF STRUCTURAL STEEL S355MT. García, S. Cicero, I. Carrascal, V. Madrazo, J. A. Álvarez, University ofCantabria, Santander, SpainPVP2014-28834: A NON-ISOTROPIC APPROACH TO PREDICT FATIGUECRACK GROWTH OF EMBEDDED FLAW IN ENGINEERING CRITICALITY AS-SESSMENTA. Carlucci, J. Li, SAIPEM SA, Montignyle-Bretonneux, France, France; K. Mcirdi,SAIPEM SA, Versailles, France; P.-L. Auvret, SAIPEM SA, Montignyle-Breton-neux, France, FranceSESSION 4.1D (CS-10-1)Thursday, July 24, 8:30 am – 10:15 am, South Tower, Regal RoomRECENT DEVELOPMENTS IN JAPANESE CODES AND STANDARDS—IDeveloped by: Y. Li, Japan Atomic Energy Agency, Ibaraki-ken, Japan; N. Miura,

Central Research Institute of Electric Power Indus, Yokosuka,Japan

Chair: Y. Li, Japan Atomic Energy Agency, Ibaraki-ken, JapanCo-Chair: A. Otani, IHI Corporation, Yokohama, JapanPVP2014-28392: PROPOSAL FOR UPDATE ON EVALUATION PROCEDUREFOR RECTOR PRESSURE VESSELS AGAINST PRESSURIZED THERMALSHOCK EVENTS IN JAPANT. Hirota, H. Sakamoto, Mitsubishi Heavy Industries, Ltd., Kobe, Hyogo, Japan;N. Ogawa, Mitsubishi Heavy Industries, Ltd., Takasago, JapanPVP2014-28621: ESTIMATION OF THROUGH-WALL CRACKING FRE-QUENCY OF RPV UNDER PTS EVENTS USING PFM ANALYSIS METHODFOR IDENTIFYING CONSERVATISM INCLUDED IN CURRENT JAPANESECODEK. Osakabe, K. Masaki, Mizuho Information & Research Institute, Inc., Tokyo,Japan; J. Katsuyama, G. Katsumata, K. Onizawa, Japan Atomic Energy Agency,Naka, Ibaraki, JapanPVP2014-28394: DEVELOPMENT OF AN AUTOMATIC 3D FINITE ELEMENTCRACK PROPAGATION SYSTEMH. Doi, Nuclear Regulation Authority, Tokyo, Japan; H. Nakamura, W. Gu, ITOCHUTechno-Solutions Corporation Solutions, Tokyo, Japan; H. Okada, Tokyo Univer-sity of Science, Noda-shi Chiba-prefecture, JapanPVP2014-28602: VERIFICATION ANALYSES FOR NEWLY DEVELOPED AU-TOMATIC 3D FINITE ELEMENT CRACK PROPAGATION SYSTEMH. Doi, Nuclear Regulation Authority, Tokyo, Japan; H. Nakamura, W. Gu, ITOCHUTechno-Solutions Corporation Solutions, Tokyo, Japan; D.-J. Shim, EngineeringMechanics Corporation of Columbus, Columbus, OH, USA; G. Wilkowski, Engi-neering Mechanics Corp. Columbus, Upper Arlington, OH, USASESSION 4.1E (SE-6-1)Thursday, July 24, 8:30 am – 10:15 am, South Tower, Imperial RoomBASE ISOLATION AND STRUCTURAL CONTROL TECHNOLOGY—IDeveloped by: C.-S. Tsai, Feng Chia University, Taichung, Taiwan; T. Matsuoka,

Meiji University, Kawasaki, Kanagawa, JapanChair: T. Ito, Osaka Prefecture University, Sakai City Osaka-pref, JapanCo-Chair: T. Matsuoka, Meiji University, Kawasaki, Kanagawa, JapanPVP2014-28014: REAL-TIME HYBRID SIMULATION OF VISCOUS DAMPERSFOR SEISMIC HAZARD MITIGATIONC. Chen, J. Valdovinos, W. Pong, San Francisco State University, San Francisco,CA, USAPVP2014-28856: A PIEZOELECTRIC REGENERATIVE DAMPER FOR LOW-FREQUENCY APPLICATIONA. Masuda, Y. Hiraki, K. Yamane, A. Sone, Kyoto Institute of Technology, Kyoto,JapanPVP2014-28989: MR DAMPER THAT UTILIZES MULTI POLE ELECTROMAG-NETST. Matsuoka, T. Sugita, Meiji University, Kawasaki, Kanagawa, Japan; K.Sunakoda, Sanwa Tekki Co., Tokyo, JapanPVP2014-29008: STUDY ON SEISMIC SAFETY IMPROVEMENT OF MECHAN-ICAL STRUCTURE IN LONG DURATION EARTHQUAKEK. Yoshida, O. Furuya, Tokyo City University, Tokyo, JapanSESSION 4.1F (SE-2-1)Thursday, July 24, 8:30 am – 10:15 am, South Tower, Terrace Room C+DSTRUCTURAL DYNAMICS—LINEAR AND NONLINEARDeveloped by: K. Fujita, Osaka City University, Osaka, JapanChair: K. Fujita, Osaka City University, Osaka, JapanCo-Chair: K. Minagawa, Saitama Institute of Technology, Saitama, Fukaya,

JapanPVP2014-28672: MODELING OF FUEL ASSEMBLIES IN A BOILING WATERREACTOR FOR SEISMIC ANALYSISY. Koide, Y. Goto, Hitachi, Ltd., Hitachinaka, Ibaraki, Japan; Y. Sato, Hitachi-GENuclear Energy, Ltd., Hitachi-shi, Ibaraki, Japan; S. Onitsuka, H. Ishigaki, Hitachi-GE Nuclear Energy, Ltd., Ibaraki, JapanPVP2014-28743: PERFORMANCE ASSESSMENT OF REINFORCED CON-

41

CRETE BUILDINGS UNDER SEISMIC EXCITATIONS. Shiradhonkar, R. Sinha, Indian Institute of Technology Bombay, Mumbai, MH,IndiaPVP2014-28945: SEISMIC DIRECTIONALITY EFFECTS ON IN-STRUCTURERESPONSE SPECTRA IN SEISMIC PROBABILISTIC RISK ASSESSMENTE. Bazan-Zurita, S. Jarernprasert, P. Rizzo, Paul C Rizzo Associates, Pittsburgh,PA, USAPVP2014-29114: EXPERIMENTAL STUDY ON SEISMIC BEHAVIOR OF A TYP-ICAL SPRINKLER PIPING SYSTEM IN HOSPITALSF.-R. Lin, National Center for Research on Earthquake Engineering, Taipei, Tai-wan; K.-C. Chang, National Taiwan University, Taipei, Taiwan; J.-F. Chai, Z.-Y. Lin,National Center for Research on Earthquake Engineering, Taipei, Taiwan; W.-ILiao, National Taipei University of Technology, TaiwanSESSION 4.1G (CT-14-1)Thursday, July 24, 8:30 am – 10:15 am, North Tower, Grand Ballroom ELIMIT ANALYSIS, ELASTIC-PLASTIC ANALYSIS AND RELATED TOPICSSymposium on Non-Linear Analysis—Co-Sponsored by Computer Technol-ogy & Bolted Joints, and Design & Analysis Technical CommitteesDeveloped by: W. Reinhardt, Candu Energy Inc., Mississauga, ON, Canada; R.

Adibi-Asl, AMEC NSS, Toronto, ON, CanadaChair: Y. Ho Park, New Mexico State University, Las Cruces, NM, USACo-Chair: R. Adibi-Asl, AMEC NSS, Toronto, ON, CanadaPVP2014-28623: OVERPRESSURE FRAGILITY EVALUATION OF A MARK IDRYWELL USING THERMAL-MECHANICAL FINITE ELEMENT ANALYSISM. M. Talaat, D. K. Nakaki, Simpson Gumpertz & Heger, Newport Beach, CA,USA; K. S. Douglas, Simpson Gumpertz & Heger, San Francisco, CA, USA; P. S.Hashimoto, Simpson Gumpertz & Heger, Newport Beach, CA, USA; Y. Y. Bayrak-tarli, BKW Energie AG, Mühleberg, SwitzerlandPVP2014-28774: PREDICTIONS OF RESIDUAL STRESSES AND DEFORMA-TIONS IN PIPE BENDS PRODUCED USING COLD, WARM AND INDUCTIONBENDING PROCESSESY. Ding, M. Yetisir, Atomic Energy of Canada Limited, Chalk River, ON, Canada;S. Khajehpour, Candu Energy Inc., Mississauga, ON, CanadaPVP2014-28896: APPLICATION OF THE NON-CYCLIC METHOD OF SHAKE-DOWN ANALYSIS TO PROBLEMS WITH CYCLICALLY MOVING THERMALSTRESSW. Reinhardt, Candu Energy Inc., Mississauga, ON, Canada; R. Adibi-Asl, AMECNSS, Toronto, ON, CanadaSESSION 4.1H (MF-3-1)Thursday, July 24, 8:30 am – 10:15 am, North Tower, Grand Ballroom GMATERIALS FOR HYDROGEN SERVICE—IDeveloped by: C. San Marchi, Sandia National Laboratories, Livermore, CA,

USAChair: B. An, National Institute of Advanced Industrial Science and Tech-

nology, Tsukuba, Ibaraki, JapanCo-Chair: C. San Marchi, Sandia National Laboratories, Livermore, CA,

USAPVP2014-28291: CRACK INITIATION AND PROPAGATION UNDER HYDRO-GEN-ENHANCED FATIGUE OF A Cr-Mo STEEL FOR GASEOUS HYDROGENSTORAGEL. Briottet, M. Escot, I. Moro, CEA, Grenoble, France; J. Furtado, Air Liquide R&D,Jouy-en-Josas, France; J. Solin, VTT, Espoo, FinlandPVP2014-28511: TENSILE- AND FATIGUE-PROPERTIES OF LOW ALLOYSTEEL JIS-SCM435 AND CARBON STEEL JIS-SM490B IN 115 MPA HYDRO-GEN GASH. Matsunaga, M. Yoshikawa, H. Itoga, J. Yamabe, S. Hamada, Kyushu University,Fukuoka, JapanPVP2014-28604: FATIGUE-LIFE AND LEAK-BEFORE-BREAK ASSESS-MENTS OF Cr-Mo STEEL PRESSURE VESSELS WITH HIGH-PRESSUREGASEOUS HYDROGENJ. Yamabe, H. Itoga, T. Awane, H. Matsunaga, S. Hamada, Kyushu University,Fukuoka, JapanPVP2014-28720: HYDROGEN-ASSISTED SUBCRITICAL CRACK GROWTHRATE IN Cr-Mo STEELSS. Konosu, Ibaraki University, Hitachi, Japan; R. Uemori, Nippon Steel & Sumit-omo Metal Corporation, Chiba, Japan; M. Yuga, JFE Steel Corporation, Handa,Japan; H. Yamamoto, Chiyoda Corporation, Yokohama, JapanPVP2014-28815: MEASUREMENT OF FRACTURE PROPERTIES FOR FER-RITIC STEEL IN HIGH-PRESSURE HYDROGEN GAST. Iijima, National Institute of Advanced Industrial Science and Technology,Tsukuba, Ibaraki, Japan; H. Itoga, Kyushu University, Fukuoka, Japan; B. An, Na-tional Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki,Japan; C. San Marchi, B. Somerday, Sandia National Laboratories, Livermore,CA, USA

SESSION 4.1I (CS-11-1)Thursday, July 24, 8:30 am – 10:15 am, South Tower, Royal Ballroom E+FEXTREME PRESSURE EQUIPMENTDeveloped by: J. Shi, J. Zheng, Zhejiang University, Hangzhou, Zhejiang, ChinaChair: J. Shi, Zhejiang University, Hangzhou, Zhejiang, ChinaCo-Chair: J. Zheng, Zhejiang University, Hangzhou, Zhejiang, ChinaPVP2014-28186: INFLUENCE OF RESIDUAL TENSILE STRESS ON STRESSCORROSION BEHAVIOR OF THE BASE METAL OF X80 PIPEQ. Xiong, Tubular Goods Research Institute of CNPC, Xi’an, China; D. Liu, North-western Polytechnical University, Xi’an, China; G. Zhang, J. Zhang, C. Qin, TubularGoods Research Institute of CNPC, Xi’an, ChinaPVP2014-28361: QUANTITATIVE ANALYSIS OF STRAIN HARDENING EF-FECT ON MECHANICAL PROPERTIES OF THE AUSTENITIC STAINLESSSTEELZ. Chen, C. Qian, Beijing University of Chemical Technology, Beijing, China; G.Yang, X. Li, China Special Equipment Inspection and Research Institute, Beijing,ChinaPVP2014-28569: DESIGN, MANUFACTURE AND MAINTENANCE OF HIGH-PARAMETER PRESSURE VESSELS IN CHINAX. Chen, J. Cui, Z. Fan, X. Zhang, W. Guan, Hefei General Machinery ResearchInstitute, Hefei, ChinaPVP2014-28740; FATIGUE PERFORMANCE ANALYSIS OF HOOP-WRAPPEDCOMPOSITE CYLINDERS WITH PIT DEFECTS ON LINER BASED ON ELE-MENT BIRTH AND DEATH METHODG. Deng, China Special Equipment Inspection and Research Institute, Beijing,China; Q. Li, Nanjing University of Technology, Nanjing, Jiangsu, China; L. Sun,China Special Equipment Inspection and Research Institute, Beijing, China; J.Wang, Taiyuan University of Technology, Taiyuan, Shanxi, China; X. Ling, NanjingTech University, Nanjing, ChinaSESSION 4.1J (MF-18-1)Thursday, July 24, 8:30 am – 10:15 am, North Tower, Garden Room 1ASSESSMENT METHODS AND MICROSTRUCTURE EVOLUTIONDeveloped by: M. Kerr, Knolls Atomic Power Laboratory, Niskayuna, NY, USA;

D.-J. Shim, Engineering Mechanics Corporation of Columbus,Columbus, OH, USA

Chair: M. Kerr, Knolls Atomic Power Laboratory, Niskayuna, NY, USACo-Chair: D.-J. Shim, Engineering Mechanics Corporation of Columbus,

Columbus, OH, USAPVP2014-28105: FRACTURE TOUGHNESS BEHAVIOR OF COMPLEXCRACKS IN DISSIMILAR METAL WELDSD. Rudland, US Nuclear Regulatory Commission, Frederick, MD, USA; M. Ben-son, NRC, Rockville, MD, USA; D.-J. Shim, Engineering Mechanics Corporationof Columbus, Columbus, OH, USAPVP2014-28865: EFFECT OF WELD GEOMETRY ON MIS-MATCH LIMITLOAD ANALYSES FOR CIRCUMFERENTIAL SURFACE CRACKED PIPES INTHE CENTRE OF WELDSS.-H. Kim, J.-J. Han, H.-S. Lee, Y. Kim, Korea University, Seoul, Korea (Repub-lic)PVP2014-28699: INVESTIGATION OF MICROSTRUCTURAL CHANGES DUETO THERMAL AGING IN DISSIMILAR METAL WELDSK. J. Choi, J. H. Kim, Ulsan National Institute of Science and Technology, Ulsan,Korea (Republic); C. B. Bahn, Pusan National University, Busan, Korea (Republic);S. C. Yoo, Ulsan National Institute of Science and Technology, Ulsan, Korea (Re-public)PVP2014-28700: THERMAL AGING EFFECTS ON MICROSTRUCTURES OFTYPE-II BOUNDARY IN DISSIMILAR METAL WELD JOINTSS. C. Yoo, J. H. Kim, K. J. Choi, Ulsan National Institute of Science and Technol-ogy, Ulsan, Korea (Republic)PVP2014-28706: REHEAT CRACKING SENSITIVITY OF CGHAZ IN VANA-DIUM-MODIFIED 2.25Cr1Mo WELDSY. Han, X. Chen, Z. Fan, H. Bu, Y. Zhou, Hefei General Machinery Research In-stitute, Hefei, ChinaSESSION 4.1K (FSI-3-10)Thursday, July 24, 8:30 am – 10:15 am, North Tower, Garden Room 2FLOW-SOUND AND FLUID-STRUCTURE-ACOUSTICAL INTERACTIONS IDeveloped by: H. Goyder, Cranfield University, Shrivenham, United KingdomChair: S. Belfroid, TNO, Delft, NetherlandsCo-Chair: H. Goyder, Cranfield University, Shrivenham, United KingdomPVP2014-28235: STUDY ON A COUNTERMEASURE USING FLEXIBLEWALLS FOR HIGH LEVEL SOUNDK. Ishihara, Tokushima Bunri University, Sanuki City, JapanPVP2014-28271: QUANTITATIVE VISUALIZATION OF UNSTABLE, ACOUSTI-CALLY COUPLED SHEAR LAYERS IN DEEP AXISYMMETRIC CAVITIESP. Oshkai, O. Barannyk, University of Victoria, Victoria, BC, CanadaPVP2014-28306: ACOUSTICALLY INDUCED INSTABILITIES IN PIPES BY THEBODE-NYQUIST CRITERIONP. Moussou, Electricite De France, Clamart, France

42

PVP2014-28090: A NEW METHOD FOR THE GENERATION OF REALISTICTIME-DOMAIN TURBULENCE EXCITATIONSJ. Antunes, Instituto Superior Tecnico, Sacavem, Portugal; P. Piteau, X. Delaune,CEA, Gif-sur-Yvette, France; L. Borsoi, CEA/Saclay - Laboratory of Dynamics,Saclay, FranceSESSION 4.1L (OAC-4-1)Thursday, July 24, 8:30 am – 10:15 am, South Tower, Royal Ballroom DTHERMAL EVALUATIONDeveloped by: D. Demoss, Sargent & Lundy LLC, Barrington, IL, USAChair: D. Demoss, Sargent & Lundy LLC, Barrington, IL, USACo-Chair: A. Smith, SRNL, Aiken, SC, USAPVP2014-28006: MOISTURE ADSORPTION CONSIDERATIONS FOR PACK-AGING PLUTONIUM OXIDES. Hensel, SRNL, Aiken, SC, USA; J. E. Laurinat, Savannah River Nuclear Solu-tions, Aiken, SC, USAPVP2014-28073: ANALYSIS OF THE RATE OF ADSORPTION OF MOISTUREONTO PLUTONIUM OXIDE POWDERSJ. E. Laurinat, Savannah River Nuclear Solutions, Aiken, SC, USA; M. Kesterson,S. Hensel, SRNL, Aiken, SC, USAPVP2014-29018: TEMPERATURE MEASUREMENTS OF A HEATED RODCENTERED WITHIN A CYLINDRICAL VESSEL FILLED WITH RAREFIED HE-LIUMR. Green, M. H. NacerM. Greiner, E. Manzo, University of Nevada, Reno, Reno,NV, USAPVP2014-29048: PREDICTION OF CLADDING TEMPERATURES WITHIN AUSED NUCLEAR FUEL TRANSFER CASK FILL WITH RAREFIELD HELIUME. Manzo, R. Green, M. Greiner, M. Hadj Nacer, University of Nevada, Reno,Reno, NV, USAPVP2014-29049: ANALYSIS OF THE PRESSURE TRANSIENT AND BURSTPRESSURE FOR EXPOSURE OF THE 9975 PRIMARY CONTAINMENT VES-SEL TO FIREJ. E. Laurinat, Savannah River Nuclear Solutions, Aiken, SC, USA; N. Askew, S.Hensel, N. Gupta, SRNL, Aiken, SC, USASESSION 4.1M (MF-6-1)Thursday, July 24, 8:30 am – 10:15 am, South Tower, Royal Ballroom CFITNESS FOR SERVICE AND FAILURE ASSESSMENT—ISymposium on Fitness for Service—Co-Sponsored by Design & Analysis,Materials & Fabrication, High Pressure Technology, and Codes & StandardsTechnical CommitteesDeveloped by: C. Jaske, Det Norske Veritas (U.S.A.), Inc., Dublin, OH, USAChair: C. Jaske, Det Norske Veritas (U.S.A.), Inc., Dublin, OH, USACo-Chair: M. Cohn, Intertek AIM, Sunnyvale, CA, USAPVP2014-28388: FATIGUE CRACK PROPAGATION EXPERIMENTAL EVALU-ATION AND MODELING OF AN AUSTENITIC STEEL ELBOW FROM A LMFBRPRIMARY SYSTEM PIPINGD. Garcia-Rodriguez, Japanese Atomic Energy Agency, Oarai, Ibaraki, Japan; Y.Sakakibara, Japanese Atomic Energy Agency, Tsuruga, Fukui, JapanPVP2014-28471: MAIN STEAM PIPING MULTIAXIAL STRESS FREQUENCYDISTRIBUTION CURVESM. Cohn, Intertek, Sunnyvale, CA, USA; F. Faham, D. Patel, Intertek AIM, Sun-nyvale, CA, USAPVP2014-29029: ANALYSIS OF A CRACK ON LNG HORIZONTAL TANKF. Gu, S. Shi, X. Xue, X. Tang, Shanghai Institute of Special Equipment Inspectionand Technical Research, Shanghai, ChinaPVP2014-29070: FAILURE ANALYSIS OF A CRACKED STEAM PIPE CLAMPS. French, PPL Generation, LLC, Hazleton, PA, USASESSION 4.1N (FSI-3-14)Thursday, July 24, 8:30 am – 10:15 am, North Tower, Grand Ballroom FTURBULENCE-INDUCED VIBRATION AND NOISEDeveloped by: D. Sumner, University of Saskatchewan, Saskatoon, SK,

Canada; P. Moussou, Electricite De France, Clamart, FranceChair: D. Sumner, University of Saskatchewan, Saskatoon, SK, CanadaCo-Chair: A. Mohany, University of Ontario Institute, Oshawa, ON, CanadaPVP2014-29110: A NUMERICAL STUDY OF TURBULENCE GENERATIONAND INDUCED STRESSES IN PRESSURE REDUCING ORIFICEM. M. M. Gabr, M. Y. A. Younan, The American University in Cairo, New Cairo,Egypt; A. M. R. El baz, The British University in Egypt, Cairo, EgyptPVP2014-28399: FLOW-INDUCED VIBRATION WITH SPATIALLY NON-UNI-FORM TURBULENT FORCINGJ. Tomko, S. Morris, University of Notre Dame, Notre Dame, IN, USAPVP2014-28822: TIME-RESOLVED SIMULTANEOUS MEASUREMENTS OFFLOW FIELD AND SURFACE DEFORMATION OF TURBULENT CHANNELFLOW OVER A COMPLIANT WALLC. Zhang, R. Miorini, J. Katz, Johns Hopkins University, Baltimore, MD, USAPVP2014-28868: TURBULENT BUFFETING OF HELICAL COIL STEAM GEN-ERATOR TUBES

H. Xu, M. Mallet, NuScale Power LLC, Corvallis, OR, USA; T. Liszkai, NuscalePower, Corvallis, OR, USASESSION 4.1O (NDE-1-1)Thursday, July 24, 8:30 am – 10:15 am, South Tower, Royal Ballroom BNDE ENGINEERINGSymposium on Nondestructive Evaluation—Co-Sponsored by NDE Divisionand Materials & Fabrication, Operations, Applications & Components, andCodes & Standards Technical CommitteesDeveloped by: W. Springer, University of Arkansas, Fayetteville, AR, USA; R.

Stakenborghs, Evisive, Baton Rouge, LA, USAChair: R. Stakenborghs, Evisive, Baton Rouge, LA, USACo-Chair: W. Springer, University of Arkansas, Fayetteville, AR, USAPVP2014-28427: PERFORMANCE-BASED NDE PERSONNEL QUALIFICA-TIONSH. Stephens, EPRI, Charlotte, NC, USAPVP2014-28475: STAINLESS STEEL TANK FAILURE ANALYSIS AND NON-DESTRUCTIVE EVALUATIONM. Song, H. Cao, X. Shen, X. Song, H. Zhang, Shandong Special Equipment In-spection Institute, Jinan, Shandong, ChinaPVP2014-28832: USING PHASED ARRAY ULTRASONIC TESTING IN LIEU OFRADIOGRAPHY FOR ACCEPTANCE OF CARBON STEEL PLATE WELDST. Moran, M. Anderson, A. D. Cinson, S. L. Crawford, Pacific Northwest NationalLaboratory, Richland, WA, USA; C. A. Nove, US Nuclear Reg Commission, Wash-ington, DC, USAPVP2014-29068: VALIDATION OF A MICROWAVE BASED INSPECTION SYS-TEM HDPE BUTT FUSIONSR. Stakenborghs, Evisive, Baton Rouge, LA, USA

no textBlock 4.2: Thursday, July 24 (10:30 am – 12:15 pm)

no textSESSION 4.2A (MF-2-3)Thursday, July 24, 10:30 am – 12:15 pm, South Tower, Terrace Room E+FAPPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT—IIIDeveloped by: G. H. B. Donato, FEI University, Sao Bernardo do Campo, Sao

Paulo, Brazil; P.-S. Lam, Savannah River National Laboratory,Aiken, SC, USA

Chair: J. Pan, University of Michigan, Ann Arbor, MI, USACo-Chair: L. Xue, Schlumberger Ltd., Sugar Land, TX, USAPVP2014-28135: REVISED ETA FACTORS FOR 3P SE(B) FRACTURE SPEC-IMENS INCORPORATING 3-D EFFECTSR. F. Souza, C. Ruggieri, University of Sao Paulo, Sao Paulo, BrazilPVP2014-28981: NUMERICAL DETERMINATION OF STRESS INTENSITYFACTORS USING ABAQUSX.-K. Zhu, EWI, Columbus, OH, United StatesPVP2014-29099: CALIBRATION OF MICROMECHANICAL DAMAGE MODELAND MACROSCOPIC DAMAGE MODEL FOR DUCTILE FRACTURE (Presen-tation Only)L. Xue, Schlumberger Ltd., Sugar Land, TX, USAPVP2014-28405: REFERENCE STRESS-BASED J ESTIMATION OF CIRCUM-FERENTIAL THROUGH-WALL CRACKED ELBOW WITH UNEQUAL THICK-NESS UNDER BENDINGK.-D. Bae, C. Kim, Y. Kim, Z. M. A. Hamid, S.-J. Kim, Korea university, Seoul,Korea (Republic)SESSION 4.2D (CS-10-2)Thursday, July 24, 10:30 am – 12:15 pm, South Tower, Regal RoomRECENT DEVELOPMENTS IN JAPANESE CODES AND STANDARDS—IIDeveloped by: S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; N.

Miura, Central Research Institute of Electric Power Indus, Yoko-suka, Japan

Chair: S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, JapanCo-Chair: J. Katsuyama, Japan Atomic Energy Agency, Ibaraki, JapanPVP2014-28645: STUDY ON STRUCTURAL INTEGRITY ASSESSMENT OFREACTOR PRESSURE VESSEL BASED ON THREE-DIMENSIONAL THER-MAL-HYDRAULICS AND STRUCTURAL ANALYSESJ. Katsuyama, G. Katsumata, K. Onizawa, Japan Atomic Energy Agency, Naka,Ibaraki, Japan; T. Watanabe, University of Fukui, Fukui-Ken, Japan; Y. Nishiyama,Japan Atomic Energy Agency, Ibaraki, JapanPVP2014-28898: A ROUND ROBIN PROGRAM OF MASTER CURVE EVALU-ATION USING MINIATURE C(T) SPECIMENS—3RD REPORT: COMPARISONOF T0 UNDER VARIOUS SELECTIONS OF SPECIMEN TEMPERATURE CON-DITIONSM. Yamamoto, CRIEPI, Yokosuka, Kanagawa, Japan; A. Kimura, Kyoto University,Uji, Kyoto, Japan; K. Onizawa, Japan Atomic Energy Agency, Naka, Ibaraki,Japan; K. Yoshimoto, Mitsubishi Heavy Industries, LTD., Takasago, Japan; T.Ogawa, Toshiba Corporation, Yokohama, Kanagawa, Japan

43

PVP2014-29053: REVISION OF FLAW EVALUATION METHODS OF PIPESHAVING A CIRCUMFERENTIAL FLAW IN JSME FITNESS-FOR-SERVICECODESH. Machida, TEPCO Systems Corporation, Tokyo, Japan; M. Itatani, ToshibaCorp., Yokohama, Japan; M. Kamaya, Inst of Nuclear Safety System, Mikata-gunFukui, JapanSESSION 4.2E (SE-6-2)Thursday, July 24, 10:30 am – 12:15 pm, South Tower, Imperial RoomBASE ISOLATION AND STRUCTURAL CONTROL TECHNOLOGY—IIDeveloped by: A. Sone, Kyoto Institute of Technology, Kyoto, Japan; S. Fujita,

Tokyo Denki University, Tokyo, JapanChair: A. Sone, Kyoto Institute of Technology, Kyoto, JapanCo-Chair: O. Furuya, Tokyo City University, Tokyo, JapanPVP2014-28132: A LOAD COMBINATION METHOD FOR SEISMIC DESIGNOF MDOF PIPING SYSTEMS WITH FRICTION CHARACTERISTICS AND MUL-TIPLE SUPPORT SYSTEMSA. Sone, Kyoto Institute of Technology, Kyoto, Japan; T. Yamauchi, JFE Engineer-ing Co., Fukuoka, Japan; A. Masuda, Kyoto Institute of Technology, Kyoto, JapanPVP2014-28133: A STUDY ON MAXIMUM RESPONSES AND THEIR VARI-ANCES OF ELASTO-PLASTIC STRUCTURES SUBJECTED TO SYNTHE-SIZED GROUND MOTIONSA. Sone, Kyoto Institute of Technology, Kyoto, Japan; I. Ichihashi, Kyoto Instituteof Technology, Uji, Japan; A. Masuda, Kyoto Institute of Technology, Kyoto, JapanPVP2014-28161: STRUCTURAL HEALTH MONITORING OF A CONCRETEFRAME SUBJECTED TO SHAKE TABLE EXCITATIONS USING SMART AG-GREGATESW. Chang, National Taipei University of Technology, Taipei, Taiwan; J.-F. Chai,National Center for Research on Earthquake Engineering, Taipei, Taiwan; W.-ILiao, National Taipei University of Technology, Taipei, TaiwanPVP2014-28192: EFFECTS OF SOIL-STRUCTURE INTERACTION, DAMPINGAND HIGHER MODES ON THE RESPONSE OF A MID-STORY-ISOLATEDSTRUCTURE FOUNDED ON MULTIPLE SOIL LAYERSC.-S. Tsai, H.-C. Su, Feng Chia University, Taichung, TaiwanSESSION 4.2F (SE-7-1)Thursday, July 24, 10:30 am – 12:15 pm, South Tower, Terrace Room C+DSEISMIC RESPONSE MITIGATION FOR MECHANICAL STRUCTURES ANDENERGY FACILITIESDeveloped by: H. Kobayashi, Ishikawajimaharima Corporation, Yokohama City,

Kanagawa Prefecture, JapanChair: H. Kobayashi, Ishikawajimaharima Corporation, Yokohama City,

Kanagawa Prefecture, JapanCo-Chair: K. Aida, Babcock Hitachi Company, Kure City, Hiroshima Prefec-

ture, JapanPVP2014-28121: STUDY ON THE SEISMIC RESPONSE OF CABLE TRAYCONSIDERING SLIDING MOTION OF CABLET. Ito, Y. Azuma, A. Shintani, C. Nakagawa, Osaka Prefecture University, Sakai,Osaka, JapanPVP2014-28283: BASIC STUDY ON VIBRATIONAL BEHAVIOR OF PIPINGSYSTEMS SUPPORTED BY ELASTO-PLASTIC DAMPER WITH GAP SUP-PORTK. Tsujita, A. Shintani, T. Ito, C. Nakagawa, Osaka Prefecture University, Sakai,Osaka, JapanPVP2014-28351: EARTHQUAKE LOAD REDUCTION EFFECTS OF BOILERSTRUCTURES BY HIGH ENERGY ABSORBING SEISMIC TIESK. Aida, K. Kawate, Y. Hiyoshi, K. Kawamura, Babcock-Hitachi K.K, Kure-shi, Hi-roshima-ken, Japan; S. Fujita, Tokyo Denki University, Tokyo, JapanSESSION 4.2G (CT-12-1)Thursday, July 24, 10:30 am – 12:15 pm, North Tower, Grand Ballroom EEXPLICIT AND IMPLICIT NONLINEAR FINITE ELEMENT ANALYSISSymposium on Non-Linear Analysis—Co-Sponsored by Computer Technol-ogy & Bolted Joints, and Design & Analysis Technical CommitteesDeveloped by: W. Reinhardt, Candu Energy Inc., Mississauga, ON, Canada; D.

Metzger, Candu Energy Inc., Mississauga, ON, Canada; R. Adibi-Asl, AMEC NSS, Toronto, ON, Canada

Chair: R. Adibi-Asl, AMEC NSS, Toronto, ON, CanadaCo-Chair: S. Xu, Kinectrics, Toronto, ON, CanadaPVP2014-28835: ANALYSES OF PROFILE RADIAL-AXIAL RING ROLLINGPROCESS BASED ON EXPLICIT FINITE ELEMENT METHODZ. Feng, H. Champliaud, Ecole de technologie superieure, Montreal, QC, CanadaPVP2014-28893: USING EXPLICIT FINITE ELEMENT ANALYSIS TO SIMU-LATE THE STRUCTURAL DAMAGE ASSOCIATED WITH AN INTERNAL DET-ONATION IN A HEAT EXCHANGERP. E. Prueter, The Equity Engineering Group, Inc., Shaker Heights, OH, USAPVP2014-28169: AUTOMATED FRACTURE MECHANICS AND FATIGUEANALYSES BASED ON THREE-DIMENSIONAL FINITE ELEMENT FORWELDING COMPONENTS

H. Nakamura, S. Tajima, O. Hazama, W. Gu, ITOCHU Techno-Solutions Corpo-ration, Tokyo, JapanPVP2014-28894: COMPARISON BETWEEN CYCLIC TESTING AND ANALYSISOF PIPING BENDS WITH LOCAL THINNINGW. Reinhardt, X. Duan, Candu Energy Inc., Mississauga, ON, CanadaSESSION 4.2H (MF-3-2)Thursday, July 24, 10:30 am – 12:15 pm, North Tower, Grand Ballroom GMATERIALS FOR HYDROGEN SERVICE—IIDeveloped by: C. San Marchi, Sandia National Laboratories, Livermore, CA,

USA; A. Duncan, Savannah River National Laboratory, Aiken,SC, USA

Chair: C. San Marchi, Sandia National Laboratories, Livermore, CA,USA

Co-Chair: A. Duncan, Savannah River National Laboratory, Aiken, SC, USAPVP2014-28236: CHARACTERISTICS OF FATIGUE CRACK GROWTH ANDSTRESS CORROSION CRACKING IN AGGRESSIVE ENVIRONMENTS OFALUMINUM ALLOYS FOR HYDROGEN GAS CONTAINERST. Ogawa, S. Hasumuma, N. Sogawa, T. Yoshida, Aoyama Gakuin University,Sagamihara, Kanagawa, Japan; T. Kanezaki, Honda R&D Co., Ltd. AutomobileR&D Center, Haga-Machi, Haga-Gun, JapanPVP2014-28381: HYDROGEN ASSISTED FATIGUE CRACK GROWTH IN APRECIPITATION-HARDENED MARTENSITIC STAINLESS STEEL UNDERGASEOUS HYDROGENG. Bilotta, M. Arzaghi, G. Henaff, G. Benoit, C. Moriconi, ISAE-ENSMA, Chas-seneuil du Poitou, FrancePVP2014-28858: FABRICATION AND TESTING OF ELECTRON BEAMWELDED ALLOY AA2219 ALUMINUM PRESSURE VESSELS FOR HIGH-PRESSURE HYDROGEN SERVICED. Balch, S. Goods, C. San Marchi, Sandia National Laboratories, Livermore, CA,USAPVP2014-28938: SUMMARY OF AN ASME/DOT PROJECT ON MEASURE-MENTS OF FATIGUE CRACK GROWTH RATE OF PIPELINE STEELSA. Slifka, E. Drexler, R. Amaro, D. Lauria, National Institute of Standards and Tech-nology, Boulder, CO, USA; D. Stalheim, DGS Metallurgical Solutions, Inc., Van-couver, WA, USAPVP2014-28943: DEVELOPMENT OF AN ENGINEERING-BASED HYDRO-GEN-ASSISTED FATIGUE CRACK GROWTH DESIGN METHODOLOGYR. Amaro, E. Drexler, A. Slifka, National Institute of Standards and Technology,Boulder, CO, USASESSION 4.2I (CS-11-2)Thursday, July 24, 10:30 am – 12:15 pm, South Tower, Royal Ballroom E+FINTEGRITY MANAGEMENT USING ACOUSTIC EMISSIONDeveloped by: G. Jia, X. Li, China Special Equipment Inspection and Research

Institute, Beijing, Zhejiang, ChinaChair: G. Jia, China Special Equipment Inspection and Research Insti-

tute, Beijing, ChinaCo-Chair: X. Li, China Special Equipment Inspection and Research Insti-

tute, Beijing, Zhejiang, ChinaPVP2014-28243: CREEP WAVE TESTING TECHNOLOGY APPLICATION ONIN-SERVICE PRESSURE PIPEY. Chen, Guangdong Institute of Special Equipment Inspection, Foshan, Guang-dong, ChinaPVP2014-28491: STUDY ON CARBURIZING INSPECTION OF CRACKINGFURNACE TUBE USING ACOUSTIC EMISSION TECHNIQUEZ. Fang, G. Jia, D. Liu, H. Yan, China Special Equipment Inspection and ResearchInstitute, Beijing, China; Z. Wang, Beijing Institute of Architectural Design, Beijing,ChinaPVP2014-28497: CLUSTER ANALYSIS OF ACOUSTIC EMISSION SIGNALSDURING CARBON STEEL PITTING CORROSION PROCESSZ. Zhang, C. Ye, J. Jiang, Nanjing Boiler & Pressure Vessel Supervision and In-spection Institute, Nanjing City, ChinaPVP2014-28878: APPLICATION OF INFRARED DETECTION TECHNOLOGYIN LIQUID AMMONIA PIPELINE INSPECTIONY. Liu, C. Tao, B. Wang, L. WeiZhong, X. Genfu, Hangzhou Special EquipmentInspection Research Institute, Hangzhou, ChinaPVP2014-29045: A LIFE MANAGEMENT METHOD ON IN-SERVICE EQUIP-MENT IN REFINING UNITH. Wang, G. Jia, X. Li, G. S. Xie, W. Wang, China Special Equipment Inspectionand Research Institute, Beijing, ChinaSESSION 4.2J (SE-10-1)Thursday, July 24, 10:30 am – 12:15 pm, North Tower, Garden Room 1RISK ASSESSMENT OF COMPONENTS AND INDUSTRIAL FACILITIESDeveloped by: O. S. Bursi, University of Trento, Trento, Italy; F. Paolacci, Uni-

versity Roma TRe, Rome, ItalyChair: O. S. Bursi, University of Trento, Trento, ItalyCo-Chair: F. Paolacci, University Roma TRe, Rome, Italy

44

PVP2014-28177: EFFECTS OF UNCERTAINTIES IN BOUNDARY CONDI-TIONS ON DYNAMIC CHARACTERISTICS OF INDUSTRIAL PLANT COMPO-NENTSO. S. Bursi, G. Abbiati, University of Trento, Trento, Italy; L. Caracoglia, North-eastern University, Boston, MA, USA; M. S. Reza, University of Trento, Trento,ItalyPVP2014-29116: SEISMIC PROBABILISTIC RISK ASSESSMENT OF NU-CLEAR POWER PLANTS USING RESPONSE-BASED FRAGILITY CURVESY.-H. Shen, National Center for Research on Earthquake Engineering, Taipei, Tai-wan; Y.-N. Huang, C.-C. Yu, National Taiwan University, Taipei, Taiwan, TaiwanPVP2014-28596: RESPONSE ANALYSIS OF SEISMIC ISOLATED STRUC-TURE CONSIDERING A PROBABILISTIC APPROACHN. Akamatsu, S. Fujita, Tokyo Denki University, Tokyo, Japan; K. Minagawa,Saitama Institute of Technology, Saitama, Fukaya, JapanSESSION 4.2K (FSI-3-11)Thursday, July 24, 10:30 am – 12:15 pm, North Tower, Garden Room 2FLOW-SOUND AND FLUID-STRUCTURE-ACOUSTICAL INTERACTIONS IIDeveloped by: S. Ziada, McMaster University, Hamilton, ON, Canada; R. Ca-

mussi, Roma Tre University, Rome, ItalyChair: S. Ziada, McMaster University, Hamilton, ON, CanadaCo-Chair: R. Camussi, Roma Tre University, Rome, ItalyPVP2014-28272: SPINNING BEHAVIOUR OF DIAMETRAL ACOUSTIC MODESIN DEEP AXISYMMETRIC CAVITIES WITH CHAMFERED EDGESO. Barannyk, P. Oshkai, University of Victoria, Victoria, BC, CanadaPVP2014-28433: FLOW-INDUCED PULSATIONS IN CLOSED SIDEBRANCHES WITH WET GASF. Sanna, J. Golliard, TNO, Delft, NetherlandsPVP2014-28508: PIV MEASUREMENTS OF AEROACOUSTIC SOURCES OFA SHALLOW CAVITY IN A PIPELINES. Mohamed, S. Ziada, McMaster University, Hamilton, ON, CanadaPVP2014-28533: MITIGATION OF SINGING IN GAS EXPORT RISER BY LIQ-UID INJECTION: FIELD CASE STUDYS. Belfroid, TNO, Delft, Netherlands; K. Lunde, Statoil, Stavanger, Norway; H.Korst, TNO, Delft, Netherlands; F. Hansen, Statoil, Harstad, Norway; P. Van Beek,TNO, Delft, NetherlandsSESSION 4.2L (OAC-4-2)Thursday, July 24, 10:30 am – 12:15 pm, South Tower, Royal Ballroom DREGULATIONS, CODES AND STANDARDSDeveloped by: S. Hensel, SRNL, Aiken, IL, USAChair: A. Smith, SRNL, Aiken, SC, USACo-Chair: S. Hensel, SRNL, Aiken, IL, USAPVP2014-28950: EXTENDING PERIODIC LEAKAGE RATE TESTING OF 9977PACKAGES WITH ELASTOMERIC O-RINGSZ. Han, V. Shah, Y. Liu, Argonne National Laboratory, Argonne, IL, USAPVP2014-29046: CLEARANCE OF BULK MATERIALS FROM DECOMMIS-SIONING PROJECTS—REGULATORY AND COST ISSUESJ. Devgun, Sargent & Lundy LLC, Chicago, IL, USA; D. Demoss, Sargent & LundyLLC, Barrington, IL, USA; S. Raupp, Sargent & Lundy LLC, Chicago, IL, USAPVP2014-29054: REVIEW OF ZION STATION ACTIVE DECOMMISSIONINGPROJECTD. Roth, ZionSolutions, Zion, IL, USAPVP2014-28622: LIFE EXTENSION OF HYDROCARBON EQUIPMENT INSOUR ENVIRONMENTS. Kumar, A. W. Almithin, M. Al-Shaiji, A. S. A. Hannan, V. Jose, Kuwait Oil Com-pany, Ahmadi, KuwaitPVP2014-28798: DESIGN AND ANALYSIS OF SHIPPING CONTAINER FORBIG ROCK DECOMMISSIONED REACTOR VESSELB. Slimp, P. Hoang, M. Papp, Sargent & Lundy LLC, Chicago, IL, USASESSION 4.2M (MF-6-2)Thursday, July 24, 10:30 am – 12:15 pm, South Tower, Royal Ballroom CFITNESS FOR SERVICE AND FAILURE ASSESSMENT—IISymposium on Fitness for Service—Co-Sponsored by Design & Analysis,Materials & Fabrication, High Pressure Technology, and Codes & StandardsTechnical CommitteesDeveloped by: M. Cohn, Intertek AIM, Sunnyvale, CA, USAChair: M. Cohn, Intertek, Sunnyvale, CA, USACo-Chair: C. Jaske, Det Norske Veritas (U.S.A.), Inc., Dublin, OH, USAPVP2014-28128: FURTHER INSIGHTS ON THE RELATIONSHIP BETWEEN J-CTOD FOR SE(B) AND SE(T) SPECIMENS INCLUDING DUCTILE CRACKPROPAGATIOND. F. B. Sarzosa, C. Ruggieri, University of Sao Paulo, Sao Paulo, BrazilPVP2014-28468: CREEP LIFE EVALUATIONS OF ASME B31.1 ALLOWANCEFOR VARIATION FROM NORMAL OPERATIONM. Cohn, Intertek, Sunnyvale, CA, USAPVP2014-29064: FRACTURE FAILURE RESEARCH ON FECULENCE DIS-CHARGE PIPE OF LPG

C. Wang, J. Chen, C. Xiaohui, W. Yinpei, East China University of Science AndTechnology, Shanghai, ChinaPVP2014-28671: CARBURIZATION OF ETHYLENE PYROLYSIS FURNACETUBE IN A PETROCHEMICAL PLANTT. Chen, X. Chen, C. Liu, J. Ye, D. Nie, Hefei General Machinery Research Insti-tute, Hefei, ChinaSESSION 4.2N (FSI-3-15)Thursday, July 24, 10:30 am – 12:15 pm, North Tower, Grand Ballroom FFSI AND FIV INVOLVING MULTI-PHASE FLOWSDeveloped by: T. Nakamura, Osaka Sangyo University, Daito, Osaka, Japan; M.

J. Pettigrew, Ecole Polytechnique, Montreal, QC, CanadaChair: M. J. Pettigrew, Ecole Polytechnique, Montreal, QC, CanadaCo-Chair: V. Janzen, Atomic Energy of Canada Limited, Chalk River, ON,

CanadaPVP2014-28106: DEVELOPMENT OF FIBRE-OPTIC PROBES TO MEASURETWO-PHASE FLOW DYNAMIC PARAMETERS IN SUPPORT OF FLOW-IN-DUCED VIBRATION STUDIESM. J. Pettigrew, B. Besner, N. Mureithi, T. Lafrance, École Polytechnique, Montreal,QC, Canada; J. Patrick, Atomic Energy of Canada Ltd., Chalk River, ON, CanadaPVP2014-28245: A NEW TEST-BENCH FOR STUDYING VIBRATIONS OFTUBES IN PARALLEL TRIANGULAR BUNDLES UNDER TWO PHASE FLOWE. Deri, EDF R&D Division, Chatou, France; J. Nibas, A. Adobes, EDF R&D, Cha-tou, FrancePVP2014-28458: SIMPLE MODEL FOR BUBBLE-WALL INTERACTIONE. Pelletier, C. Beguin, S. Étienne, École Polytechnique de Montréal, Montreal,QC, CanadaPVP2014-28460: VOID FRACTION EFFECT ON ADDED MASS IN BUBBLYFLOWC. Beguin, E. Pelletier, S. Étienne, École Polytechnique de Montréal, Montreal,QC, CanadaPVP2014-28461: WALL PROXIMITY AND CURVATURE EFFECT ON ADDEDMASS FORCES IN TWO-PHASE CROSS-FLOWSC. Beguin, École Polytechnique de Montréal, Montreal, QC, Canada; T. Plagnard,Ecole des mines de Paris, Paris, France; S. Étienne, École Polytechnique de Mon-tréal, Montreal, QC, CanadaSESSION 4.2O (NDE-4-1)Thursday, July 24, 10:30 am – 12:15 pm, South Tower, Royal Ballroom BRECENT DEVELOPMENTS IN NDE ENGINEERINGSymposium on Nondestructive Evaluation—Co-Sponsored by NDE Divisionand Materials & Fabrication, Operations, Applications & Components, andCodes & Standards Technical CommitteesDeveloped by: N. Tada, Okayama University, Okayama, Japan; W. Springer,

University of Arkansas, Fayetteville, AR, USAChair: N. Tada, Okayama University, Okayama, JapanCo-Chair: W. Springer, University of Arkansas, Fayetteville, AR, USAPVP2014-28142: ON-LINE STRUCTURAL DAMAGE FEATURE EXTRACTIONBASED ON AUTOREGRESSIVE STATISTICAL PATTERN OF TIME SERIESM.-H. Hu, S. T. Tu, F.-Z. Xuan, Z. Wang, East China University of Science & Tech-nology, Shanghai, ChinaPVP2014-28512: DETECTION OF DEFECTS IN ELBOW PIPES USINGGUIDED WAVESP. Zhang, S. Zhou, W. Lv, East China University of Science and Technology,Shanghai, ChinaPVP2014-28684: POTENTIAL DIFFERENCE DISTRIBUTION ON FLAT PLATEAROUND SEMI-ELLIPSOIDAL THINNING ON THE BACK SURFACEN. Tada, M. Uchida, M. Nohara, Okayama University, Okayama, JapanPVP2014-28727: VOLUMETRIC EXAMINATION AFTER PWHT ON A CARBONSTEEL PRESSURE VESSELJ. Becker, M. Schulte, Burns & McDonnell, Kansas City, MO, USA

no textBlock 4.3: Thursday, July 24 (2:00 pm – 3:45 pm)

no textSESSION 4.3A (MF-2-4)Thursday, July 24, 2:00 pm – 3:45 pm, South Tower, Terrace Room E+FAPPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT—IVDeveloped by: A.-H. Mourad, United Arab Emirates University, Al-Ain, United

Arab Emir.Chair: A.-H. Mourad, United Arab Emirates University, Al-Ain, United

Arab Emir.Co-Chair: Y. J. Chao, Tianjin University, Tianjin, ChinaPVP2014-28145: A STUDY ON THE NORMALIZED LOAD FUNCTION FOR J-R CURVE TESTING USING NORMALIZATION METHODK.-C. Kim, Y. Ma, Doosan Heavy Industries & Construction, Changwon, Korea(Republic)PVP2014-28556: STUDY ON THE MECHANICAL BEHAVIOR OF ALUMINUM

45

ALLOY 5083 FRICTION STIR WELDED JOINTA.-H. Mourad, M. Allam, United Arab Emirates University, Al-Ain, United ArabEmir.; A. Eldomiaty, Suez Canal, Sues, EgyptPVP2014-28660: FRACTURE PROPERTIES OF RPV AUSTENITIC CLADDING(PRESENTATION ONLY)M. Brumovsky, UJV, Rez, Czech Republic; M. Kytka, UJV Rez Plc, Rez, CzechRepublicPVP2014-28993: AN ASSESSMENT OF MECHANICAL PROPERTIES OFA508-3 STEELS USED IN CHINESE NUCLEAR REACTOR VESSELSM. Yu, Z. Luo, Y. J. Chao, Tianjin University, Tianjin, ChinaSESSION 4.3E (SE-6-3)Thursday, July 24, 2:00 pm – 3:45 pm, South Tower, Imperial RoomBASE ISOLATION AND STRUCTURAL CONTROL TECHNOLOGY—IIIDeveloped by: S. Fujita, Tokyo Denki University, Tokyo 101-8457, Japan; A.

Sone, Kyoto Institute of Technology, Kyoto, JapanChair: T. Matsuoka, Meiji University, Kawasaki, Kanagawa, JapanCo-Chair: H.-C. Su, Feng Chia University, Taichung, TaiwanPVP2014-28346: APPLICATION OF SEISMIC ISOLATION SYSTEMS TO HIGH-RAISED HOUSES IN LOWLAND REGIONSH.-C. Su, C.-S. Tsai, Feng Chia University, Taichung, TaiwanPVP2014-28358: SEISMIC RESPONSE CONTROL OF BASE ISOLATEDSTRUCTURES BY USING DYNAMIC MASSA. Sone, S. Ueyama, A. Masuda, S. Kato, Kyoto Institute of Technology, Kyoto,JapanPVP2014-28473: SHAKING TABLE TEST OF BASE-ISOLATED NUCLEARPOWER PLANT AND FLOOR SPECTRA ANALYSIST. Wang, L. Ding, J. Li, Institute of Engineering Mechanics, CEA, Harbin, ChinaPVP2014-28611: PERIODIC MATERIALS-BASED 3D SEISMIC BASE ISOLA-TORS FOR NUCLEAR POWER PLANTSY. Yan, University of Houston, Houston, TX, USA; A. Laskar, WorleyParsonsGroup, Houston, TX, USA; Z. Cheng, Beijing Jiaotong University, Beijing, China;F. Menq, University of Texas, Austin, TX, USA; Y. Tang, Argonne National Lab.,Argonne, IL, USASESSION 4.3F (SE-13-3)Thursday, July 24, 2:00 pm – 3:45 pm, South Tower, Terrace Room C+DSEISMIC ANALYSIS AND DESIGN OF PIPING SYSTEMS—IIIDeveloped by: G. Slagis, G C Slagis Associates, Roseville, CA, USAChair: G. Slagis, G C Slagis Associates, Roseville, CA, USACo-Chair: A. Maekawa, Institute of Nuclear Safety System, Inc., Fukui,

JapanPVP2014-29011: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 4),FAILURE BEHAVIOR OF CROSSOVER PIPING FOR SEISMIC ISOLATIONSYSTEMT. Otoyo, A. Otani, IHI Corporation, Yokohama, Japan; S. Fukushima, M. Jimbo,Toshiba Corporation, Yokohama, Japan; T. Yamamoto, Mitsubishi Heavy Indus-tries, Ltd., JapanPVP2014-29032: DEVELOPMENT OF AN EVALUATION METHOD FOR SEIS-MIC ISOLATION SYSTEMS OF NUCLEAR POWER FACILITIES (PART 5),COMPONENT TEST OF MAIN STEAM CROSSOVER PIPINGK. Mizuno, Mitsubishi Heavy Industries, Ltd., Takasago, Japan; H. Shimizu, Mit-subishi Heavy Industries, Takasago, Hyogo, Japan; M. Jimbo, Toshiba Corpora-tion, Yokohama, Japan; S. Onishi, Chubu E.P., Nagoya, Aichi, Japan; N. Oritani,Hitachi-GE Nuclear Energy, Ltd., Hitachi, JapanPVP2014-28183: A LESS-CONSERVATIVE APPROACH TO SIMPLIFIED SEIS-MIC ANALYSIS FOR SMALL BORE NUCLEAR PIPING SYSTEMJ. Lee, I. Kim, KEPCO E&C, Yongin, Gyeonggi, Korea (Republic)SESSION 4.3G (FSI-2-1)Thursday, July 24, 2:00 pm – 3:45 pm, North Tower, Grand Ballroom EFLUID TRANSIENT ANALYSISDeveloped by: A. Arastu, Bechtel Power Corporation, San Francisco, CA, USA;

J. C. Jo, Korea Institute of Nuclear Safety, Daejon, Korea (Re-public)

Chair: A. Arastu, Bechtel Power Corporation, San Francisco, CA, USACo-Chair: J. C. Jo, Korea Institute of Nuclear Safety, Daejon, Korea (Re-

public)PVP2014-28064: 3D CFD SIMULATION OF WATER HAMMER THROUGH A90° BEND—APPLICABILITY OF URANS, 3D EFFECTS AND UNSTEADYFRICTIONS. Riedelmeier, S. Becker, E. Schlücker, Institute of Process Machinery and Sys-tems Engineering iPAT University Erlangen-Nuremberg, Erlangen, GermanyPVP2014-28134: TRANSIENT THERMAL-HYDRAULIC RESPONSES OF THENUCLEAR STEAM GENERATOR SECONDARY SIDE TO A MAIN STEAM LINEBREAKJ. C. Jo, Korea Institute of Nuclear Safety, Daejon, Korea (Republic); F. Moody,GE Retired, Turlock, CA, USA

PVP2014-28314: MASS FLUX AND HYDRODYNAMIC FORCES OF TWO-PHASE CAVITATING FLOW THROUGH A SAFETY RELIEF VALVE AT INITIALSUB-COOLING CONDITIONSJ. Pinho, P. Rambaud, von Karman for Fluid Dynamics Institute, Brussels, Bel-gium; S. Chabane, Centre Technique des Industries Mécaniques, Nantes, FrancePVP2014-28693: AN IMPROVED 1D MODEL FOR LIQUID SLUGS TRAVEL-LING IN PIPELINESA. Tijsseling, TU Eindhoven, Eindhoven, Netherlands; Q. Hou, Tianjin University,Tianjin, China; Z. Bozkus, Middle East Technical University, Ankara, TurkeySESSION 4.3H (MF-3-3)Thursday, July 24, 2:00 pm – 3:45 pm, North Tower, Grand Ballroom GMATERIALS FOR HYDROGEN SERVICE—IIIDeveloped by: C. San Marchi, Sandia National Laboratories, Livermore, CA,

USA; A. Duncan, Savannah River National Laboratory, Aiken,SC, USA

Chair: A. Duncan, Savannah River National Laboratory, Aiken, SC, USACo-Chair: D. Balch, Sandia National Laboratories, Livermore, CA, USAPVP2014-28181: MICROMECHANISMS OF HYDROGEN-ASSISTED CRACK-ING IN SUPER DUPLEX STAINLESS STEEL INVESTIGATED BY SCANNINGPROBE MICROSCOPYB. An, T. Iijima, National Institute of Advanced Industrial Science and Technology,Tsukuba, Ibaraki, Japan; C. San Marchi, B. Somerday, Sandia National Labora-tories, Livermore, CA, USAPVP2014-28280: EFFECT OF INDENTATION LOAD ON VICKERS HARDNESSOF AUSTENITIC STAINLESS STEEL AFTER HYDROGEN CHARGINGO. Takakuwa, Y. Mano, H. Soyama, Tohoku University, Sendai, Miyagi, JapanPVP2014-28640: SSRT AND FATIGUE CRACK GROWTH PROPERTIES OFHIGH-STRENGTH AUSTENITIC STAINLESS STEELS IN HIGH-PRESSUREHYDROGEN GASH. Itoga, Kyushu University, Fukuoka, Japan; T. Matsuo, Hydrogen Energy Testand Research Center, Fukuoka, Japan; A. Orita, H. Matsunaga, S. Matsuoka,Kyushu University, Fukuoka, JapanPVP2014-28811: COMPARISON OF STAINLESS STEELS FOR HIGH-PRES-SURE HYDROGEN SERVICEC. San Marchi, B. Somerday, Sandia National Laboratories, Livermore, CA, USAPVP2014-28964: PREDICTION ON INITIATION OF HYDROGEN-INDUCED DE-LAYED CRACKING IN HIGH-STRENGTH STEEL BASED ON COHESIVEZONE MODELINGY. Wang, J. Gong, L. Geng, Y. Jiang, Nanjing University of Technology, Nanjing,ChinaSESSION 4.3I (CS-11-4)Thursday, July 24, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom E+FEXAMPLE OF ENGINEERING FAILURE ANALYSIS IN CHINADeveloped by: X. Chen, Z. Fan, Hefei General Machinery Research Institute,

Hefei, ChinaChair: X. Chen, Hefei General Machinery Research Institute, Hefei,

ChinaCo-Chair: Z. Fan, Hefei General Machinery Research Institute, Hefei, ChinaPVP2014-28490: EXPERIMENTAL INVESTIGATION ON DYNAMIC FLUIDPRESSURE OF LIQUID STORAGE TANKS UNDER SEISMIC EXCITATIONSBASED ON RAIN FLOW COUNTING METHODZ. Fang, China Special Equipment Inspection and Research Institute, Beijing,China; Z. Chen, Zhejiang University, Hangzhou, China; D. Liu, G. Jia, China Spe-cial Equipment Inspection and Research Institute, Beijing, China; Z. Wang, BeijingInstitute of Architectural Design, Beijing, ChinaPVP2014-28521: FITNESS FOR SERVICE ASSESSMENT OF A PACKED COL-UMN SUBJECTED TO FIRE DAMAGES. Shao, L. Cao, Z. Li, J. Liu, China Special Equipment Inspection and ResearchInstitute, Beijing, ChinaPVP2014-28535: MATERIAL DAMAGE ANALYSIS AND LIFE PREDICTION OFCR5MO USED AS FURNACE TUBINGF. Xu, Y. Ye, L. Xia, Zhejiang Provincial Special Equipment Inspection And Re-search Institute, Hangzhou, Zhejiang, ChinaPVP2014-28539: PRESENT STATUS AND PERIODICAL INSPECTION OFLARGE CAPACITY CYLINDERS FOR TUBE TRAILERS IN CHINAW. Li, Taiyuan University of Technology, Taiyuan, Shanxi, China; G. Deng, ChinaSpecial Equipment Inspection and Research Institute, Beijing, China; F. Ji, TaiyuanUniversity of Technology, Taiyuan, Shanxi, China; J. Zhang, J. Zhao, China SpecialEquipment Inspection and Research Institute, Beijing, ChinaPVP2014-29003: MAJOR HAZARD MODELLING OF PRESSURED SPECIALEQUIPMENT IN CHEMICAL INDUSTRY PARKS BASED ON FCBPSS METHODP. Song, X. Tang, H. Yu, Y. Qian, Shanghai Institute of Special Equipment Inspec-tion and Technical Research, Shanghai, ChinaSESSION 4.3K (FSI-3-12)Thursday, July 24, 2:00 pm – 3:45 pm, North Tower, Garden Room 2FLOW-SOUND AND FLUID-STRUCTURE-ACOUSTICAL INTERACTIONS III

46

Developed by: S. Morris, University of Notre Dame, Notre Dame, IN, USA; A.Mohany, University of Ontario Institute, Oshawa, ON, Canada

Chair: P. Oshkai, University of Victoria, Victoria, BC, CanadaCo-Chair: S. Morris, University of Notre Dame, Notre Dame, IN, USAPVP2014-28664: ACOUSTIC ANALYSIS OF A ROTARY CONTROL VALVEUNDER FLOW INDUCED RESONANCEF. C. Bossi, S. Malavasi, Politecnico di Milano, Milano, ItalyPVP2014-28784: ON THE FLOW-EXCITED ACOUSTIC RESONANCE OF ISO-LATED CYLINDER(S) IN CROSS-FLOWN. Arafa, A. Mohany, University of Ontario Institute, Oshawa, ON, Canada; M.Hassan, University of Guelph, Guelph, ON, CanadaPVP2014-28299: ADVANCES IN UNIVERSAL SCALING FOR BROADBANDTURBULENT NOISE IN INTERNAL FLOW DEVICESD. Violato, A. de Jong, J. Golliard, TNO, Delft, NetherlandsPVP2014-28785: FLOW-EXCITED ACOUSTIC RESONANCE OF SINGLEFINNED CYLINDER IN CROSS-FLOWN. Arafa, A. Mohany, University of Ontario Institute, Oshawa, ON, CanadaSESSION 4.3L (DA-17-1)Thursday, July 24, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom DACOUSTIC INDUCED VIBRATION IN PIPING SYSTEMSDeveloped by: A. Dweib, WorleyParsons, Atyrau, KazakhstanChair: A. Dweib, WorleyParsons, Atyrau, KazakhstanCo-Chair: A. Mann, Emerson Process Management, Fisher Valve Division,

Marshalltown, IA, USAPVP2014-28140: ACOUSTIC FATIGUE EVALUATION OF BRANCH CONNEC-TIONSD. Lin, Bechtel Corporation, Houston, TX, USA; A. Prakash, Bechtel Corporation,San Francisco, CA, USA; P. Diwakar, B. David, Bechtel Corporation, Houston,TX, USAPVP2014-28260: STRAIN BASED AIV EVALUATIONA. Mann, A. Fagerlund, D. Eilers, Emerson Process Management, Marshalltown,IA, USAPVP2014-28303: STUDY OF ACOUSTIC VIBRATION IN PIPING SYSTEMS BYENERGY-BASED FINITE ELEMENT ANALYSISA. Dweib, WorleyParsons, Atyrau, KazakhstanSESSION 4.3M (MF-11-1)Thursday, July 24, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom CMODELLING AND APPLICATIONDeveloped by: D. G. Harlow, Lehigh University, Bethlehem, PA, USAChair: D. G. Harlow, Lehigh University, Bethlehem, PA, USACo-Chair: K. Nikbin, Imperial College, London, United KingdomPVP2014-28516: FAILURE ANALYSIS OF SHIFT GAS TUBESJ. Shi, China Special Equipment Inspection and Research Institute, Beijing, China;K. Zhang, Nanjing University of Technology, Nanjing, China; Y. Wang, China Spe-cial Equipment Inspection and Research Institute, Beijing, China; Q. Chen,Sinopec Hubei Chemical Fertilizer Company, Zhijiang City, China; W. Li, SinopecLuoyang Company, Luoyang, ChinaPVP2014-28881: EQUILIBRIUM MECHANISM BASED CURVE FITTING ANDDATA SMOOTHING METHODS FOR DATA WITH SINGLE AND MULTIPLEFAILURE MECHANISMSZ. Wei, Tenneco, Grass Lake, MI, USA; K. Nikbin, Imperial College, London,United KingdomPVP2014-28889: NUMERICAL INVESTIGATION OF STRESS CONCENTRA-TION FACTOR AT IRREGULAR CORROSION PIT UNDER TENSION-TORSIONLOADINGY. Huang, C. Wang, S. T. Tu, F.-Z. Xuan, East China University of Science andTechnology, Shanghai, China; T. Itoh, Ritsumeikan University, Shiga, JapanSESSION 4.3N (FSI-3-16)Thursday, July 24, 2:00 pm – 3:45 pm, North Tower, Grand Ballroom FAXIAL FLOW FSI IDeveloped by: S. Kaneko, The University of Tokyo, Tokyo, Japan; M. Paidoussis,

McGill University, Montreal, QC, Canada; K. Fujita, Osaka CityUniversity, Osaka, Japan; J. Antunes, Instituto Superior Tecnico,Sacavem, Portugal

Chair: S. Kaneko, The University of Tokyo, Tokyo, JapanCo-Chair: A. Mohany, University of Ontario Institute, Oshawa, ON, CanadaPVP2014-28146: WHIRL STABILITY OF HERRINGBONE-GROOVED GAS-LU-BRICATED JOURNAL BEARINGK. Fujita, Osaka City University, Osaka, JapanPVP2014-28273: FLUID MODE EXCITATION IN LAUNCH VEHICLE FEEDLINES INDUCED BY POGO ACCUMULATOR VENTINGK. Dotson, B. Sako, T. Nguyen, The Aerospace Corporation, El Segundo, CA,USAPVP2014-28282: LINEAR AND NONLINEAR DYNAMICS OF CANTILEVEREDCYLINDERS IN AXIAL FLOWA. Jamal, M. Paidoussis, L. G. Mongeau, McGill University, Montreal, QC, Canada

PVP2014-28335: DYNAMICS OF A PIPE CONVEYING FLUID FLEXIBLY SUP-PORTED AT THE ENDSM. Kheiri, M. Paidoussis, McGill University, Montreal, QC, Canada; G. C. del Pozo,AMEC, Oakville, ON, CanadaPVP2014-28309: FLUID DAMPING IN AN OSCILLATING ARRAY OF CYLIN-DERS SUBMITTED TO AXIAL FLOWL. Divaret, EDF SEPTEN, Villeurbanne, France; F. Depaix, ENSTA ParisTech,Palaiseau, France; P. Moussou, Electricite De France, Clamart, France; O. Cadot,O. Doaré, Ensta ParisTech, Palaiseau, France, N de B. de Chassey, EDF R&D,Clamart, FranceSESSION 4.3O (NDE-5-1)Thursday, July 24, 2:00 pm – 3:45 pm, South Tower, Royal Ballroom BCORROSION DETECTION AND CHARACTERIZATIONSymposium on Nondestructive Evaluation—Co-Sponsored by NDE Divisionand Materials & Fabrication, Operations, Applications & Components, andCodes & Standards Technical CommitteesDeveloped by: W. Springer, University of Arkansas, Fayetteville, AR, USA; M.

Carte, Olympus NDT, Houston, TX, USAChair: M. Carte, Olympus NDT, Houston, TX, USACo-Chair: W. Springer, University of Arkansas, Fayetteville, AR, USAPVP2014-28613: ADVANCES IN DM WELDS EXAMINATION FROM RPV IDB. Thigpen, W. Glass, AREVA NDE Solutions, Lynchburg, VA, USAPVP2014-28763: COMPARATIVE STUDY OF ACOUSTIC EMISSION CHAR-ACTERISTICS FOR INTERGRANULAR CORROSION OF 316L STAINLESSSTEEL PARENT MATERIAL AND WELDMENTW. Bai, M. Chai, L. Li, Q. Duan, Xi’an Jiaotong University, Xi’an, Shaanxi, ChinaPVP2014-28979: DETECTION OF INCIPIENT STAGE STRESS CORROSIONCRACKING IN PIPING SYSTEM WELDS USING FIBER OPTIC STRAINGAGESB. Jackson, D. Bosko, M. Cronin, J. Warwick, Intertek AIM, Sunnyvale, CA, USA;J. Wall, Electric Power Research Institute, Charlotte, NC, USAPVP2014-29069: DETECTION AND CHARACTERIZATION OF CORROSIONUNDER COATINGSR. Stakenborghs, R. Goitia, Evisive, Baton Rouge, LA, USA

no textBlock 4.4: Thursday, July 24 (4:00 pm – 5:45 pm)

no textSESSION 4.4A (MF-2-5)Thursday, July 24, 4:00 pm – 5:45 pm, South Tower, Terrace Room E+FAPPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT—VDeveloped by: D. Scarth, Kinectrics Inc., Toronto, ON, CanadaChair: D. Scarth, Kinectrics Inc., Toronto, ON, CanadaCo-Chair: W. Reinhardt, Candu Energy Inc., Mississauga, ON, CanadaPVP2014-28386: STUDY ON THE FAILURE ASSESSMENT OF SMALL DIAM-ETER PIPE WITH CIRCUMFERENTIAL CRACK UNDER MONOTONIC ANDCYCLIC MULTI-AXIAL LOADINGM. Itatani, T. Saito, Toshiba Corporation, Yokohama, Japan; Y. Akiniwa, YokohamaNational University, Yokohama, Japan; K. Naito, The Chugoku Electric Power Co.,Inc., Hiroshima, JapanPVP2014-28761: COMPARISONS OF MONOTONIC, LOW-CYCLE ANDULTRA-LOW-CYCLE FATIGUE BEHAVIOURS OF X52, X60 AND X65 PIPINGSTEEL GRADESJ. Pereira, IDMEC - Mechanical Engineering Institute, Porto, Portugal; A. DeJesus, Utad, Vila Real, Portugal; A. Fernandes, Idmec Univ Porto, Porto, Portugal;J. Xavier, CITAB/UTAD, Vila Real, Portugal; B. Martins, UTAD, Vila Real, Portu-galPVP2014-28942: A STATISTICAL-BASED FATIGUE CRACK INITIATIONMODEL FOR AXIAL FLAWS IN Zr Nb PRESSURE TUBESC. Liu, D. Scarth, Kinectrics Inc., Toronto, ON, Canada; A. Douchant, Atomic En-ergy of Canada Ltd., Chalk River, ON, CanadaSESSION 4.4E (SE-5-1)Thursday, July 24, 4:00 pm – 5:45 pm, South Tower, Imperial RoomSEISMIC RESPONSE AND DESIGN OF STORAGE TANKS, PIPING ANDOTHER COMPONENTS—IDeveloped by: T. Taniguchi, Tottori University, Tottori, Japan; A. Maekawa, Insti-

tute of Nuclear Safety System, Inc., Fukui, JapanChair: T. Taniguchi, Tottori University, Tottori, JapanCo-Chair: A. Maekawa, Institute of Nuclear Safety System, Inc., Fukui,

JapanPVP2014-28634: MASSES OF FLUID CONTRIBUTING TO ROCKING MOTIONOF CYLINDRICAL TANKS WITH PARTIAL UPLIFT OF BOTTOM PLATET. Taniguchi, Y. Katayama, Tottori University, Tottori, JapanPVP2014-28635: A CASE STUDY OF EVALUATION OF TANK ROCK MOTIONWITH SIMPLIFIED ANALYSIS PROCEDURET. Taniguchi, D. Okui, Tottori University, Tottori, Japan

47

PVP2014-28780: THE ROCKING AND STABILITY OF SPENT FUEL CASKSR. Ananth, S. Day, Structural Integrity Associates, Inc., San Jose, CA, USA; M.Bose, Exelon Nuclear, Warrenville, IL, USAPVP2014-28371: IMPACT OF DEFORMATION STIFFNESS BEYOND YIELDPOINT OF STEEL PIPE SUPPORT STRUCTURES ON NONLINEAR SEISMICRESPONSE ANALYSIST. Takahashi, A. Maekawa, Institute of Nuclear Safety System, Inc., Fukui, JapanSESSION 4.4H (MF-3-4)Thursday, July 24, 4:00 pm – 5:45 pm, North Tower, Grand Ballroom GMATERIALS FOR HYDROGEN SERVICE—IVDeveloped by: C. San Marchi, Sandia National Laboratories, Livermore, CA,

USAChair: C. San Marchi, Sandia National Laboratories, Livermore, CA,

USACo-Chair: H. Matsunaga, Kyushu University, Fukuoka, JapanPVP2014-28364: DEVELOPMENT OF PRESSURE VESSELS MADE OF 9Cr-1Mo-V STEELS FOR HIGH-TEMPERATURE PROCESSES IN REFINING IN-DUSTRIESM. Yamada, Kobe Steel, Ltd., Takasago-City, Hyogo Pref., Japan; S. Terada, KobeSteel, Ltd., Kobe Hyogo, Japan; T. Nakanishi, T. Ikeuchi, Kobe Steel, Ltd.,Takasago-City, Japan; S. Nanba, Kobe Steel, Ltd., Kobe, Hyogo Pref., JapanPVP2014-28578: FRACTURE TOUGHNESS AFTER LONG-TERM AGING IN9CR-1MO-V STEEL FOR PRESSURE VESSELST. Miyamura, S. Nanba, Kobe Steel, Ltd., Kobe, Japan; T. Nakanishi, M. Yamada,Kobe Steel, Ltd., Takasago-City, Hyogo Pref., JapanPVP2014-28581: THE QUANTITATIVE ESTIMATION OF THE SENSITIVITY OFCORROSION AND HYDROGEN ENVIRONMENT ON FATIGUE CRACKGROWTH RATE FOR STEELSM. Ishikawa, A. T. Yokobori Jr., T. Ohmi, Y. Kawashima, Tohoku University, Sendai,Japan; S. Sugawara, Tohoku Steel Co., Ltd., Miyagi, JapanPVP2014-28584: THE ANALYSIS OF HYDROGEN DIFFUSION BEHAVIORSCOUPLED WITH THE ANALYSIS OF HEAT TRANSFER AROUND THE HEATAFFECTED ZONE OF WELDINGT. Ohmi, A. T. Yokobori Jr., K. Takei, Y. Konishi, Tohoku University, Sendai, Miyagi,JapanPVP2014-28677: MATERIAL SELECTION AND SAFETY VALIDATION OFSTEEL TANKS FOR HYDROGEN STATIONSY. Wada, The Japan Steel Works, Ltd., Tokyo, JapanSESSION 4.4I (CS-11-5)Thursday, July 24, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom E+FSTRUCTURAL INTEGRITY OF CHINESE PRESSURE EQUIPMENTDeveloped by: J. Gong, Nanjing University of Technology, Nanjing, China; J.

Zhao, Nanjing Tech University, Nanjing, Jiangsu, ChinaChair: J. Gong, Nanjing University of Technology, Nanjing, ChinaCo-Chair: J. Zhao, Nanjing Tech University, Nanjing, Jiangsu, ChinaPVP2014-28119: ELASTIC STRESSES AND LIMITED BENDING MOMENTSOF CONCENTRIC REDUCERS AND ECCENTRIC REDUCERS SUBJECT TOBENDING MOMENTSS. Chen, The Challenge Petrochemical Machinery Corporation of Maoming,Maoming City, Guangdong, China; J. Chen, Z. Wang, C. Wang, East China Uni-versity of Science and Technology, Shanghai, ChinaPVP2014-28667: COMPARISON OF DIFFERENT ANALYSIS DESIGN METH-ODS IN THE CALCULATION OF HYDROGENATION REACTOR SKIRTSTRUCTUREP. Jianhua, X. Chen, J. Cui, Hefei General Machinery Research Institute, Hefei,Anhui, ChinaPVP2014-28701: EFFECTS OF STRAIN HARDENING ON AUSTENITIC STAIN-LESS STEEL STRENGTH BEHAVIORY. Deng, Hubei Special Equipment Safety Inspection and Research Institute,Wuhan, Hubei, China; G. Chen, General Administration of Quality Supervision,Inspection and Quarantine of P. R. China, Beijing, ChinaPVP2014-29036: INTEGRITY MANAGEMENT OF LARGE SIZE ATMOS-PHERIC STORAGE TANKG. Li, China Special Equipment Inspection and Research Institute, Beijing, China;H. Chen, China University of Petroleum (Beijing), Beijing, China; Z. Fang, D. Liu,G. Jia, China Special Equipment Inspection and Research Institute, Beijing, ChinaSESSION 4.4K (FSI-3-13)Thursday, July 24, 4:00 pm – 5:45 pm, North Tower, Garden Room 2FLOW-SOUND AND FLUID-STRUCTURE-ACOUSTICAL INTERACTIONS IVDeveloped by: S. Ziada, McMaster University, Hamilton, ON, Canada; H. Goy-

der, Cranfield University, Shrivenham, United Kingdom; P. Mous-sou, Electricite De France, Clamart, France

Chair: P. Moussou, Electricite De France, Clamart, FranceCo-Chair: S. Ziada, McMaster University, Hamilton, ON, CanadaPVP2014-28023: IDENTIFICATION OF AEROACOUSTIC SOURCES IN A T-JUNCTION

E. Salt, S. Mohamed, D. Arthurs, S. Ziada, McMaster University, Hamilton, ON,CanadaPVP2014-28855: CHARACTERISTICS OF AERODYNAMIC SOUND RADIATEDFROM TWO FINNED CYLINDERSH. Hamakawa, H. Matsuoka, K. Hosokai, Oita University, Oita, Japan; E. Nishida,Shonan Inst of Tech, Fujisawa Kanagawa, Kanagawa Pref., Japan; E. Kurihara,Oita University, Oita, JapanPVP2014-28859: THE EFFECT OF UPSTREAM EDGE GEOMETRY ON THEACOUSTIC RESONANCE EXCITATION IN SHALLOW RECTANGULAR CAV-ITIESA. Omer, N. Arafa, A. Mohany, University of Ontario Institute, Oshawa, ON,Canada; M. Hassan, University of Guelph, Guelph, ON, CanadaPVP2014-29042: STUDY ON STABILITY ANALYSIS ON ACOUSTIC RESO-NANCE IN HEAT EXCHANGER TUBE BUNDLESE. Nishida, Shonan Inst of Tech, Fujisawa Kanagawa, Kanagawa Pref., Japan;H. Hamakawa, Oita University, Oita, Ohita Pref., JapanSESSION 4.4L (DA-17-2)Thursday, July 24, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom DACOUSTIC INDUCED VIBRATION IN PIPING SYSTEMS IIDeveloped by: A. Dweib, WorleyParsons, Atyrau, KazakhstanChair: A. Dweib, WorleyParsons, Atyrau, KazakhstanCo-Chair: A. Mann, Emerson Process Management, Fisher Valve Division,

Marshalltown, IA, USAPVP2014-28325: DIFFICULTIES IN PREDICTING CYCLES TO FAILUREUSING FINITE ELEMENT ANALYSIS OF ACOUSTICALLY INDUCED VIBRA-TION (AIV) PROBLEMS IN PIPING SYSTEMSA. Ghosh, Y. Niu, R. Arjunan, KBR, Houston, TX, USAPVP2014-28600: INVESTIGATION OF CHARACTERISTIC OF FLOW INDUCEDVIBRATION CAUSED BY TURBULENCE RELATING TO ACOUSTICALLY IN-DUCED VIBRATIONM. Nishiguchi, H. Izuchi, Chiyoda Corporation, Yokohama, Japan; G. Minorikawa,Hosei University, Tokyo, JapanPVP2014-28794: MEASUREMENT OF HIGH AMPLITUDE RELIEF VALVENOISE FOR ACOUSTICALLY INDUCED VIBRATION AND COMPARISON TOPREDICTIVE METHODSN. Evans, Southwest Research Institute, San Antonio, TX, USASESSION 4.4M (MF-11-2)Thursday, July 24, 4:00 pm – 5:45 pm, South Tower, Royal Ballroom CDAMAGE EVOLUTIONDeveloped by: K. Nikbin, Imperial College, London, United KingdomChair: K. Nikbin, Imperial College, London, United KingdomCo-Chair: D. G. Harlow, Lehigh University, Bethlehem, PA, USAPVP2014-28058: NUMERICAL EVALUATION OF WALL THINNING PROFILEIN SEPARATION AND UNION PIPE DUE TO FLOW ACCELERATED CORRO-SIONS. Watanabe, K. Yoneda, Central Research Institute of Electric Power Industry,Komae-shi, Tokyo, JapanPVP2014-28517: AN INVESTIGATION ON MULTIPLE AXIAL SURFACEPWSCC GROWTH BEHAVIORS IN PRIMARY ALLOY 600 COMPONENTSUSING THE PWSCC INITIATION MODEL AND DAMAGE MECHANICS AP-PROACHJ.-S. Kim, E.-J. Heo, Sunchon National University, Suncheon, Korea (Republic);J.-Y. Jeon, Y. Kim, Korea University, Seoul, Korea (Republic)PVP2014-28687: FAILURE ANALYSIS CASES OF STRESS CORROSIONCRACKING IN COMPLEX MEDIA ENVIRONMENTSZ. Ai, X. Chen, Z. Fan, R. Li, Hefei General Machinery Research Institute, Hefei,ChinaSESSION 4.4N (FSI-3-17)Thursday, July 24, 4:00 pm – 5:45 pm, North Tower, Grand Ballroom FAXIAL FLOW FSI IIDeveloped by: M. Paidoussis, McGill University, Montreal, QC, Canada; J. An-

tunes, Instituto Superior Tecnico, Sacavem, Portugal; K. Fujita,Osaka City University, Osaka, Japan

Chair: M. Paidoussis, McGill University, Montreal, QC, CanadaCo-Chair: J. Antunes, Instituto Superior Tecnico, Sacavem, PortugalPVP2014-28126: THE IMPACT OF EMERGENCY RELEASE IN LNG TRANS-FER WITH FLEXIBLE HOSESE. van Bokhorst, J. Smeulers, J. van der Putte, D. Remans, TNO Technical Sci-ences, Delft, Netherlands; T. Webber, KLAW Products, Wiltshire, United KingdomPVP2014-28337: AN EXPERIMENTAL STUDY OF DYNAMICS OF TOWEDFLEXIBLE CYLINDERSM. Kheiri, M. Paidoussis, M. Amabili, McGill University, Montreal, QC, CanadaPVP2014-28370: EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ONTHE INTERACTION BETWEEN FLUID AND STRUCTURE IN HIGH TEMPER-ATURE PRESSURIZED PIPINGX. Schuler, K.-H. Herter, H. Huber, S. Moogk, E. Laurien, University of Stuttgart,Stuttgart, Germany

48

PVP2014-28147: STABILITY OF A STATIONARY FLEXIBLE CANTILEVEREDPLATE IN AN AXIAL FLOWK. Fujita, K. Matsumoto, Osaka City University, Osaka, JapanPVP2014-28638: ON CONTROL FACTORS FOR THE OSCILLATION OF A SIM-PLIFIED FLIP-FLOP JET NOZZLEK. Umemura, R. Kobayashi, T. Inoue, Doshisha University, Kyoto, Japan; H. Tani-gawa, Maizuru National College of Technology, Kyoto, Japan; K. Hirata, DoshishaUniversity, Kyoto, Japan

49

Adibi-Asl, R. Ch, Co-Ch, Dev 1.4C, 4.1G, 4.2GAggarwal, M. Dev 1.1HAida, K. Co-Ch 4.2FAn, B. Ch 4.1HAnami, K. Co-Ch 1.4NAntunes, J. Ch, Co-Ch, Dev 1.3D, 1.4D, 4.3N, 4.4NArastu, A. Ch, Co-Ch, Dev 2.1C, 2.2C, 2.3C, 2.4C, 4.2D, 4.3GAsayama, T. Dev 3.2DBalch, D. Co-Ch 4.3HBaranyi, L. Co-Ch 1.3DBarnes, R. Ch, Co-Ch, Dev 1.1C, 1.3CBasavaraju, C. Ch, Co-Ch, Dev 2.1J, 2.2J, 2.4JBausman, A. Co-Ch, Dev 2.1LBednar, J. Ch, Ps 1.2X, 2.2OBees, W. Ts 0.3QBelfroid, S. Ch, Co-Ch 1.3N, 4.1KBenaouicha, M. Co-Ch 1.1DBergholz, S. Dev 3.2BBezdikian, G. Ch, Dev 2.4K, 3.1KBezensek, B. Co-Ch, Dev, Ts 1.3J, 1.3Q, 1.4J, 1.4Q, 2.4H, 3.1DBonora, N. Co-Ch 1.4OBosko, D. Ch, Co-Ch 1.1I, 1.3I, 1.4IBouzid, H. Co-Ch, Dev 1.1LBoyle, J. Ch, Co-Ch, Dev 1.1G, 1.3G, 1.4G, 2.1GBrar, G. Ch, Co-Ch, Dev 2.2D, 2.3D, 2.4DBrochard, D. Dev 2.4NBrown, R. Ts 1.3Q, 1.4QBrown, W. Ch, Co-Ch, Dev 2.3L, 2.4L, 3.1L, 3.2LBrumovsky, M. Ch, Dev 2.3KBrust, F. Ch, Co-Ch, Dev 1.3E, 1.4E, 3.1E, 2.4EBursi, O. S. Ch, Co-Ch, Dev 2.4A, 4.2JCamussi, R. Co-Ch, Dev 4.2KCarlucci, A. Co-Ch 3.2CCarte, M. Ch, Dev 4.3OChao, Y. J. Co-Ch 4.3AChen, X. Ch, Dev 4.3ICheta, A. Ch, Dev 1.3K, 1.4KCipolla, R. Ch, Dev 2.1MCohn, M. Ch, Co-Ch, Dev 4.1M, 4.2MCordes, R. Ch, Co-Ch 1.1I, 1.3I, 1.4ICory, Jr, J. Dev 2.1S, 2.2S, 2.3S, 2.4SCourtin, S. Dev 3.2CCrane, R. Co-Ch, Dev 2.1MDalton, C. Dev 1.3N, 1.4DDavies, C. M. Ch, Co-Ch, Dev 1.1O, 1.3O, 1.4O, 2.1O, 2.4ODe Baglion, L. Co-Ch 4.1Cde Langre, E. Ch, Dev 1.4N, 3.2NDemoss, D. Ch, Dev 4.1LDennis, R. Co-Ch, Dev 1.1O, 1.3O, 1.4O, 2.1ODixon, R. Ch, Dev 1.1HDonato, G. H. B. Dev 4.2ADozaki, K. Dev 2.2MDuan, X. Ch 1.4CDuncan, A. Ch, Co-Ch, Dev 3.2A, 4.1A, 4.2H, 4.3HDweib, A. Ch, Co-Ch, Dev 2.3J, 2.4J, 3.1J, 4.3L, 4.4LÉtienne, S. Ch 1.3NEzekoye, I. Ch, Co-Ch, Dev 2.3K, 2.4KFan, Z. Co-Ch, Dev 4.3IFaria, H. Ch, Co-Ch, Dev 1.1A, 1.3A, 2.2AFeng, Z. Ch, Co-Ch, Dev 1.4E, 2.1EFinneran, S. Ch, Co-Ch, Dev 1.1I, 1.3I, 1.4IFrith, R. Dev 1.1G, 1.3G, 1.4G, 2.1GFujita, K. Ch, Co-Ch, Dev 1.3D1.3M, 4.1F, 4.3N, 4.4NFujita, S. Ch, Co-Ch, Dev 3.1I, 3.2I, 4.2E, 4.3E

Fukuoka, T. Co-Ch, Dev 1.4LFuruya, O. Ch, Dev, Co-Ch, Dev 3.1I, 3.2I, 4.2EGeng, J. Dev 2.4IGiacomelli, E. Ch, Dev 1.3H, 1.4HGiannopapa, C. G. Ch 1.1DGilles, P. Ch, Co-Ch, Dev 2.3E, 2.4E, 3.1C, 4.1CGilman, T. Co-Ch 3.2BGiurgiutiu, V. Ch, Dev 2.3AGong, J. Ch, Dev 4.4IGoyder, H. Ch, Co-Ch, Dev 1.1N, 2.1N, 4.1K, 4.4KGriesbach, T. J. Ch, Dev 1.1JGross, D. Ch, Dev 2.3HHadley, I. Ts 1.3Q, 1.4QHafner, R. S. Dev 1.1B, 1.3B, 1.4B, 2.1B, 2.2B, 2.3B, 2.4B, 3.1BHall, J. Dev 1.1DHari, Y. Dev 2.1D, 2.2D, 2.3D, 2.4DHarlow, D. G. Ch, Co-Ch, Dev 3.2K, 4.3M, 4.4MHassan, M. Ch, Co-Ch, Dev 2.2N, 2.3NHassan, T. Ch, Dev 2.1F, 2.2FHeinz, B. Dev 3.2BHensel, S. Co-Ch, Dev 4.2LHoang, P. Ch 2.3MHojo, K. Co-Ch, Dev 1.1J, 2.2MHorácek, J. Ch, Dev 1.4N, 3.2NHorn, A. Ch, Dev 2.1I, 2.2IHourigan, K. Dev 1.1N, 1.3NInada, F. Co-Ch, Dev 2.3IIto, T. Ch 4.1EIwamatsu, F. Dev 3.1DIyama, H. Dev 1.1DIyer, S. Ch, Co-Ch, Dev 1.1B, 2.3B, 3.1O, 3.2OJames, P. Ch, Co-Ch, Dev 1.1F, 1.3F, 1.4F, 2.1I, 2.2IJanzen, V. Ch, Co-Ch 2.4B, 3.1B, 4.2NJaske, C. Ch, Co-Ch, Dev 1.1S, 1.2S, 1.3S, 1.4S, 4.1M, 4.2MJazaeri, H. Co-Ch 1.3OJia, G. Ch, Dev 4.2IJiang, H. Ch 4.1AJo, J. C. Co-Ch, Dev 4.3GJones, C. Co-Ch 3.1AJones, S. Co-Ch, Dev 2.4IKalyanam, S. Co-Ch, Dev 1.4AKaneko, S. Ch, Dev 1.4N, 4.3NKaramanos, S. Dev 1.1M, 1.4M, 2.1F, 2.2FKasahara, N. Ch, Dev 2.3OKatsuyama, J. Co-Ch 4.2DKeim, E. Ch, Co-Ch, Dev 1.1E, 1.1F, 1.3F, 1.4FKeltjens, J. Ch, Dev 3.1HKerkhof, K. Co-Ch 1.1MKerr, M. Ch, Dev 4.1JKim, M. Ch, Dev 2.3IKim, Y. Ch 1.3OKobayashi, H. Ch, Dev 4.2FKobayashi, T. Co-Ch, Dev 1.3L, 2.2LKrishnaswamy, P. Ch, Dev 2.1AKwon, Y. Dev 1.1B, 1.3B, 1.4B, 2.1B, 2.2B, 2.3B,

2.4B, 3.1BLam, P.-S. Ch, Co-Ch, Dev 2.3A, 3.2A, 4.2ALebarbe, T. Ch, Dev 3.2DLeen, S. Co-Ch, Ch 1.1B, 2.3BLejeail, Y. Ch, Dev 2.4OLejeune, H. Ch 1.3LLevine, H. Ch, Dev 2.4ILi, B. Ch, Co-Ch, Dev 2.1J, 2.2J 2.3J, 3.1JLi, X. Co-Ch, Dev 4.2I

CHAIR/CO-CHAIR, DEVELOPERS, PLENARY SPEAKERS, TUTORIAL SPEAKERSNAME TITLE SESSION NAME TITLE SESSION

50

Li, Y. Ch, Co-Ch, Dev 2.3M, 4.1DMadew, C. Co-Ch 1.4JMaekawa, A. Co-Ch, Dev 4.3F, 4.4EMahmoudi, A. H. Ch, Co-Ch, Dev 2.2E, 2.3EMann, A. Co-Ch 4.3L, 4.4LMatsunaga, H. Co-Ch 4.4HMatsuoka, T. Ch, Co-Ch, Dev 2.1F, 4.1E, 4.3EMcCracken, S. Ts 2.3Q, 2.4QMcGill, R. Co-Ch, Dev 2.3G, 2.4GMcGuffie, S. Ch, Co-Ch, Dev 2.1H, 3.1G, 3.2GMcKie, N. Ch, Co-Ch, Dev 2.2O, 3.2HMehta, H. Ch, Co-Ch, Dev 2.1C, 2.2C, 2.3C, 2.4CMendez-Torres, A. Dev 2.3AMertiny, P. Ch, Dev 1.1A, 2.2AMeskell, C. Ch, Co-Ch, Dev 3.1N, 3.2NMetzger, D. Dev 4.2GMinagawa, K. Co-Ch 1.4M, 4.1FMiura, N. Dev 4.1D, 4.2DMochizuki, M. Ch, Co-Ch, Dev 2.1E, 2.2EMoffat, A. J. Ch 2.1OMohany, A. Co-Ch, Dev 1.3D, 1.4N, 3.2N, 4.1N, 4.3K, 4.3NMoinereau, D. Ch, Dev 1.1F, 1.3F, 1.4FMorris, S. Co-Ch, Dev 1.3D, 4.3KMourad, A.-H. Ch, Dev 4.3AMoussou, P. Ch, Dev 4.1N, 4.4KMunson, D. Co-Ch 2.1AMureithi, N. Ch, Co-Ch, Dev 2.1N, 2.4N, 3.1NNagata, S. Co-Ch, Dev 1.3LNakamura, T. Co-Ch, Dev 2.2N, 2.4N, 4.2NNanstad, R. Ch, Dev 2.3F, 2.4FNassar, S. Ch, Dev 1.4LNicak, T. Ch, Co-Ch, Dev 1.1F, 1.3F, 1.4FNikbin, K. Ch, Co-Ch, Dev 1.3B, 1.4B, 2.3O, 3.2K, 4.3M, 4.4MNoble, R. Ch, Co-Ch, Dev 2.3L, 2.4L, 3.1L, 3.2LO’Dowd, N. Ch, Co-Ch 1.1A, 1.3A, 2.1B, 2.2BOkajima, S. Co-Ch 3.2DOshkai, P. Ch, Co-Ch, Dev 1.1N, 1.3D, 4.3KOtani, A. Ch 4.1DPaidoussis, M. Ch, Dev 4.3N, 4.4NPan, J. Ch 4.2APaolacci, F. Ch, Co-Ch, Dev 1.1M, 1.4M, 4.2JPark, D.-Y. Co-Ch 2.2HPark, Y. H. Ch, Dev 3.1A, 4.1GPeters, D. Ch, Dev, Ts 1.2X, 2.1Q, 2.2OPettigrew, M. J. Ch, Dev 2.3N, 4.2NPham, M. Dev 2.2OPorter, M. Ch, Dev 2.1HPrueter, P. E. Ch, Dev 2.4HQian, H. Ch, Co-Ch 2.4B, 3.1BRana, M. Ch, Co-Ch 2.1D, 2.2M, 2.3DReese, S. H. Ch 3.2BReich, A. Ch, Dev 2.1K, 2.2KReinhardt, W. Co-Ch, Dev 1.4C, 4.1G, 4.2G, 4.4ARelangi, R. Ch, Co-Ch 2.1D, 2.2D, 2.4DRen, W. Co-Ch, Dev 2.3F, 2.4FRockwell, D. Dev 1.1NRodery, C. Ch, Co-Ch, Dev 1.1G, 1.3G, 1.4G, 2.1G, 2.4M,

3.1M, 3.2MRodriguez, E. Co-Ch, Dev 2.3HRudland, D. Ch, Co-Ch, Dev 1.1E, 1.3E, 3.1ERudolph, J. Co-Ch, Dev 3.1C, 3.2BRuggles-Wrenn, M. Co-Ch, Dev, Ts 2.1Q, 2.2ASan Marchi, C. Ch, Co-Ch, Dev 4.1H, 4.2H, 4.3H, 4.4HSawa, T. Ch, Dev 1.1L

Scarth, D. Ch, Dev 2.1M, 4.4ASegall, A. Ch, Co-Ch, Dev 3.1OSeipp, T. Ch, Co-Ch, Dev 2.4M, 3.1M, 3.2MSham, T.-L. Ch, Co-Ch, Dev 1.1C, 1.3CSharples, J. Ch, Dev 1.3J, 1.4J, 2.2G, 3.1DSherry, A. H. Ch 2.1IShi, J. Ch, Dev 4.1IShim, D.-J. Ch, Co-Ch, Dev 1.4A, 4.1JShoji, Y. Ch, Co-Ch, Dev 1.3B, 1.4B, 1.3K, 1.4KSigrist, J.-F. Dev 3.1NSimpson, K. C. Co-Ch, Dev 1.3H, 1.4H, 3.2HSkeels, B. Ps 1.2XSlagis, G. Ch, Dev 1.1M, 1.3M, 2.4A, 4.3FSmith, A. Ch, Co-Ch 4.1L, 4.2LSmith, R. Ts 2.3Q, 2.4QSone, A. Ch, Dev 4.2E, 4.3ESpringer, W. Co-Ch, Dev 3.1F, 3.2F, 4.1O, 4.2O, 4.3OStakenborghs, R. Ch, Dev, Ts 0.1Q, 4.1OStephens, H. Ch, Dev 3.1F, 3.2FStevens, G. Dev 2.4CSu, H.-C. Co-Ch 4.3ESubramanian, K. Co-Ch 1.1HSumner, D. Ch, Dev 1.4D, 4.1NSwitzer, R. Ts 0.2QTada, N. Ch, Dev 4.2OTakanashi, M. Ch 4.1CTaniguchi, T. Ch, Co-Ch, Dev 1.1M, 2.1B, 2.2B, 2.4N, 4.4ETodd, J. Dev 1.1S, 1.2S, 1.3S, 1.4SToft, A. Co-Ch, Dev 2.2GTsai, C.-S. Co-Ch, Dev 1.1M, 2.2F, 4.1ETurnbow, M. Co-Ch 3.2FVlaicu, D. Ch, Co-Ch, Dev 3.1G, 3.2GWang, J. Dev 4.1AWatanabe, O. Co-Ch 2.1OWaterland, J. Ch, Dev 2.1L, 2.2LWatson, C. Ch 3.2CWeaver, D. S. Ch, Dev 2.1N, 2.2NWink, R. Co-Ch 3.1HXu, S. Ch, Co-Ch, Dev 2.3G, 2.4G, 4.2GXue, L. Co-Ch 4.2AYatomi, M. Co-Ch 1.1OYonekawa, R. Dev 2.2MYounan, M. Y. A. Ch, Dev 0.1Q, 0.2Q, 0.3Q, 1.3Q, 1.4Q, 2.3Q, 2.4QYoung, G. Co-Ch, Dev 2.1K, 2.2K, 3.1KZhao, J. Co-Ch, Dev 4.4IZhao, M. Ch, Co-Ch, Dev 1.1G, 1.3G, 1.4G, 2.1G, 2.4M,

3.1M, 3.2MZheng, J. Co-Ch, Dev 4.1IZhu, X.-K. Ch, Dev 2.2HZiada, S. Ch, Co-Ch, Dev 4.2K, 4.4KZolotarev, I. Co-Ch, Dev 1.3D, 1.4D

CHAIR/CO-CHAIR, DEVELOPERS, PLENARY SPEAKERS, TUTORIAL SPEAKERSNAME TITLE SESSION NAME TITLE SESSION

51

Abbiati, G. 4.2JAbdalla, H. 3.2GAbdolvand, H. 2.2EAbe, H. 1.4OAbe, S. 1.3BAdams, Th. 4.1AAdams, Ti. 2.1JAdibi-Asl, R. 1.4C, 4.1GAdobes, A. 3.1N, 4.2NAgeiev, S. 3.1GAggarwal, M. 1.1HAgostini, M. 1.3HAhnert, S. 2.3HAhuja, Y. 1.4EAi, Z. 4.4MAida, K. 4.2FAikawa, Y. 3.1IAinsworth, R. A. 2.1B, 2.3I, 3.2AAkamatsu, N. 4.2JAkiniwa, Y. 4.4AAkkerman, R. 1.1AAkula, V. 2.2AAlam, M. 1.1NAlaoui, A. E. M. 1.1DAl-Badour, F. 1.1EAlexander, C. 1.3A, 1.4K, 3.1MAlkanhal, T. 3.1JAllam, M. 4.3AAllenspach, A. 1.4HAlleshwaram, A. 1.1JAlley, D. 2.3GAlmeida Junior, J. H. S. 1.1AAlmithin, A. W. 4.2LAlomari, A. 2.2AAl-Shaiji, M. 4.2LÁlvarez, J. A. 4.1CAmabili, M. 4.4NAmaro, R. 4.2HAmetani, Y. 2.3DAmico, S. 1.1AAn, B. 4.1H, 4.3HAn, G.-B. 3.1EAn, L. 2.3AAnami, K. 2.4NAnanth, R. 4.4EAncelet, O. 1.1F, 3.1LAnderson, M. 4.1OAnderson, T. 2.4FAndo, M. 3.2DAndrasik, J. 2.1JAndrieu, A. 1.4FAngelucci, M. 1.1BAntaki, G. 2.4GAntunes, J. 4.1KArafa, N. 4.3K, 4.4KArdito, R. 1.3NArif, A. F. M. 2.2AArjunan, R. 4.4LArthurs, D. 4.4KArun, S. 1.1I, 1.3FArzaghi, M. 4.2HAsada, S. 2.2C, 2.4CAsadi, M. 1.3EAsahara, S. 3.1I

Asano, H. 3.1IAsayama, T. 3.2DAskew, N. 4.1LAttoui, H. 2.1LAubert, K. 3.1KAubin, V. 2.1B, 2.4JAumuller, J. 2.4DAustin, C. 1.4OAuvret, P.-L. 1.4I, 2.4J, 4.1CAvery, A. 2.1GAwane, T. 4.1HAzough, F. 2.2EAzuma, Y. 4.2FBaas, P. 1.3JBabbini, A. 2.1HBabel, P. 2.1JBachir, M. A. 1.4FBächli, H. 1.4HBae, K.-H. 2.4O, 4.2ABagagli, R. 1.3H, 1.4HBahn, C. B. 4.1JBai, W. 4.3OBaker, Q. 2.4IBalch, D. 4.2HBalduzzi, F. 2.1HBalestreri, F. 2.2KBall, H. 2.4IBallheimer, V. 3.1L, 3.1OBankston Jr, D. 1.4BBannister, A. 2.1IBao, S. 3.2OBapat, S. 3.1GBarannyk, O. 4.1K, 4.2KBaranyi, L. 1.3NBarkey, M. 2.4IBarragan, A. 3.1OBarroso, C. 1.1LBate, S. 2.1EBatura, A. 1.1I, 1.4G, 3.1OBaudin, C. 2.4FBaulch, J. 1.1LBausman, A. 2.1LBaylac, G. 2.2GBayraktarli, Y. Y. 4.1GBazan-Zurita, E. 4.1FBazoune, A. 1.1EBeardsmore, D. 3.1CBecht IV, C. 2.3J, 2.4J, 3.1JBecht V, C. 2.3J, 2.4J, 3.1JBecker, J. 4.2OBecker, S. 1.1B, 4.3GBedoya, J. 3.1MBeesley, R. 2.2BBeguin, C. 2.1N, 2.2N, 3.1N, 4.2NBelfroid, S. 4.2KBenhamou, C. 1.4FBenoit, G. 4.2HBenson, M. 2.3E, 3.1E, 4.1JBergholz, S. 3.2BBergstrom, D. 1.1NBerland, J. 3.1NBernardini, G. 1.4DBesner, B. 4.2NBetervide, A. A. 2.2F

Bezensek, B. 2.3MBhattacharya, A. 3.1GBhende, G. 1.1MBhimanadam, R. 3.2KBiao, X. 2.3KBilotta, G. 4.2HBissett, D. C. 3.1ABlaizot, J. 2.2EBlanc, M. 3.2DBlat, M. 3.2DBlatman, G. 3.1CBletzer, C. 3.1OBlom, F. 1.3J, 3.2KBlouin, A. 2.4JBogdan, A. 3.1OBompard, P. 1.1IBond, S. 1.1KBonnaud, E. 1.3E, 3.1EBonora, N. 1.1O, 1.3I, 1.3O,

2.1O, 3.1MBooth, M. 1.3CBorazzo, C. 3.1LBorodii, M. 1.1IBorsoi, L. 4.1KBortz, M. 1.1HBosch, A. 3.2CBose, M. 4.4EBosko, D. 4.3OBossi, F. C. 4.3KBouchard, P. J.1.1O, 1.4E, 2.3B, 2.3BBourgeois, M. 1.1F, 1.3F, 2.4JBouzid, H. 2.1L, 2.2BBowen, M. 1.3KBozkus, Z. 4.3GBradai, S. 2.2B, 3.2CBrandely, A. 2.4IBrar, G. 2.2DBremberg, D. 1.3EBrenner, M. 2.1JBriottet, L. 4.1HBroc, D. 2.4NBrodbelt, A. R. 1.4NBrosse, A. 1.1E, 2.3FBroussard, J. E. 1.4E, 3.1EBrown, G. 2.4MBrown, R. 2.4H, 2.4OBrown, W. 2.3L, 2.4L, 3.2LBrumovsky, M. 4.3ABrust, F. 1.1E, 1.4A, 2.2F, 3.1EBu, H. 4.1JBudden, P. 1.3F, 1.4J, 2.1IBugg, J. D. 1.1NBukowski, J. V. 3.2KBunch, P. 2.2OBursi, Oreste S. 4.2JCadot, O. 4.3NCallaghan, M. 3.1ECambier, S. 3.1CCamilleri, D. 2.2ACammarata, A. 1.1GCampbell, C. 1.3BCao, H. 1.4J, 4.1OCao, L. 4.3ICaracoglia, L. 4.2J

Carcasci, C. 1.3HCardolaccia, J. 2.4NCariteau, B. 1.1BCarlucci, A. 1.3I, 1.4I, 2.4J,

3.1M, 4.1CCarrascal, I. 4.1CCarter, P. 1.1CCarucci, V. 2.4DCawley, P. 2.3ACedat, D. 2.2CCerdeira, C. H. 1.3DChabane, S. 2.4K, 4.3GChai, J.-F. 2.2F, 4.1F, 4.2EChai, M. 4.3OChaise, T. 2.2EChandiramani, D. 1.1G, 2.2DChang, K.-C. 4.1FChang, W. 4.2EChang, Y. 2.1OChao, Y. J. 2.3A, 3.2A, 4.3AChapuliot, S. 1.1F, 1.4F, 2.4J, 2.4JCharreton, C. 2.2NChauvy, C. 2.4FChen, C. 4.1EChen, G. 4.4IChen, Haof. 1.1B, 2.2BChen, Haoy. 4.4IChen, J. 4.2M, 4.4IChen, Q. 3.2M, 4.3MChen, S. 4.4IChen, T. 4.2MChen, Xi. 2.1AChen, Xu. 1.1O, 3.2O, 4.1I,

4.1J, 4.2M, 4.4I, 4.4MChen, Y. 4.2IChen, Zha. 2.4D, 4.1AChen, Zhip. 4.3IChen, Zhiw. 4.1ICheng, X. 3.2GCheng, Z. 4.3EChirez, S. 3.1BChitty, W.-J. 2.2CCho, S. 3.2OChoi, J. B. 1.4B, 1.4J, 2.4B, 3.1GChoi, K. J. 4.1JChoi, K. 2.4FChou, H.-W. 2.1K, 2.2KChurier, H. 1.4FCicero, S. 4.1CCilluffo, G. 2.3GCinson, A. D. 1.1J, 4.1OCipolla, R. 2.1M, 2.2DClover, D. 3.2LCochran, J. 3.1HCochran, K. 2.2ICofie, N. 1.1J, 2.1MCohn, M. 4.1M, 4.2MCorcoran, J. 2.3ACorre, S. 2.4FCosse, J. 1.3DCosta, F. M. S. 3.2BCourtin, S. 2.2C, 3.2CCouzinet, A. 2.4KCrawford, S. L. 1.1J, 4.1O

AUTHOR INDEXNAME SESSION NAME SESSION NAME SESSION NAME SESSION

52

Cristofani, A. 1.3HCronin, M. 4.3OCrooker, P. 2.2E, 2.3ECui, J. 4.1I, 4.4ICui, T. 2.3ACumblidge, S. 1.1JCushing, R. 1.1Mda Silva, G. M. 1.1LDaly, M. 2.3BDam, J. 1.1DDanil’chuk, E. 1.1IDautreme, E. 3.1KDavey, K. 1.3JDavid, B. 4.3LDavid, S. 2.3EDavies, C. M. 2.1O, 2.3ADay, S. 4.4EDe Baets, P. 3.1ADe Baglion, L. 2.1C, 2.2CDe Boo, G. 2.1MDe Bruyn, D. 1.4MDe Jesus, A. 4.4Ade Jong, A. 4.3Kde Langre, E. 3.2NDe Mathan, N. 2.3FDe Ridder, J. 1.4NDe Waele, W. 3.1ADeCola, D. 2.2ADedhia, Dilip 1.1JDeeskow, P. 3.2BDegroote, J. 1.4Ndel Pozo, G. C. 4.3NDelaune, X. 4.1KDelvallée-Nunio, I. 2.2KDemjancukova, K. 1.1MDemoss, D. 4.2LDeng, G. 4.1I, 4.3IDeng, Y. 4.4IDepaix, F. 4.3NDeri, E. 3.1N, 4.2NDeVan, M. 2.1GDevgun, J. 4.2LDeWald, A. T. 2.3EDewees, D. 1.3C, 2.4H, 2.4ODey, G. K. 2.3BDi Lillo, P. 2.3ADiamanti, K. 1.4MDias, C. M. 1.3BDiaz, M. R. A. 1.1JDichiaro, S. 1.3O, 2.1ODing, L. 4.3EDing, Y. 4.1GDivaret, L. 4.3NDiwakar, P. 4.3LDo, S. C. 1.3F, 1.4EDoaré, O. 4.3NDodds Jr., R. H. 2.2IDodds, J. 2.2JDodia, H. 2.3ODoi, H. 4.1DDong, P. 2.1E, 2.4IDong, Q. 2.3HDooryhee, E. 2.4FDorado, J. I. 2.1G

Dotson, K. 4.3NDouchant, A. 4.4ADouglas, J. D. 1.4ODouglas, K. S. 4.1GDrexler, E. 4.2HDuan, B. 2.1JDuan, D.-M. 2.2HDuan, Q. 4.3ODuan, X. 4.2GDulieu, P. 2.3DDuncan, A. 4.1ADweib, A. 4.3LDwenger, F. 1.4MDyab, M. 1.4LEdling, L.-O. 1.3EEilers, D. 4.3LEisenman, J. 2.2AEl baz, A. M. R. 4.1NEl Bouzidi, S. 2.2N, 3.1NEl-Bagory, T. A. 1.1I, 3.1JEldomiaty, A. 4.3AElliott, N. S. J. 1.4NEllul, B. 2.2AEmslie, J. 3.1CEnglish, P. D. 3.1EEnomoto, Y. 1.4BEren, E. 2.2IErickson, M. 2.1D, 2.2D, 2.2IEscot, M. 4.1HEsposito, L. 1.1O, 1.3O, 2.1OÉtienne, S. 2.1N, 2.2N, 3.1N, 4.2NEvans, N. 4.4LEvon, K. 3.2CEzekoye, I. 2.4KFaal-Amiri, A. 2.1HFagerlund, A. 4.3LFaham, F. 4.1MFaidy, C. 2.2C, 2.3CFan, Z. 1.1O, 3.2O, 4.1I, 4.1J, 4.4MFang, Z. 4.2I, 4.3I, 4.4IFaria, H. 1.1AFarrell, R. S. 2.4KFeenstra, P. 2.2NFeng, X. 1.4OFeng, Y. 2.1JFeng, Zhe. 4.2GFeng, Zhi. 2.2E, 2.3EFenton, M. 2.1FFerguson, N. 2.2LFernandes L. L. 3.1NFernandes, A. 4.4AFerrara, G. 2.1HFerrucci, B. 1.4MFesich, T. M. 3.2CFisher, N. 2.3NFolgarait, P. 1.3OFontes, J.-P. 3.1KFord, M. 1.3FFormosa, M. 1.1GForni, M. 1.4MFrancis, J. A. 2.2E, 2.4E, 3.1EFreire, J. L. F. 3.2BFreko, P. 1.3GFrench, S. 4.1M

Frew, B. 2.3FFujino, T. 2.2MFujita, K. 4.3N, 4.4NFujita, S. 1.4B, 3.1B, 4.2F, 4.2JFujita, Y. 1.3CFujiwara, Y. 1.3CFukuoka, T. 1.4LFukushima, S. 1.3M, 4.3FFukuta, Y. 2.4CFunai, M. 1.3O, 3.1B, 3.1OFung, A. 2.2JFung, M. 2.2JFung, P. K. 2.2JFung, R. H. 2.2JFurtado, J. 4.1HFuruya, O. 4.1EGabr, M. M. M. 4.1NGalle, T. 3.1AGallee, S. 1.1EGao, Z. 1.1G, 3.2OGarbay, E. 1.4FGarcia, A. F. 1.3BGarcía, T. 4.1CGarcia-Rodriguez, D. 4.1MGardin, C. 2.2B, 3.2CGaric, G. 3.1MGarud, Y. 3.2BGehrlicher, S. 3.2GGelineau, O. 3.2DGenerosi, S. 1.3HGenette, P. 2.2CGenfu, X. 4.2IGeng, J. 2.4IGeng, L. 4.3HGeniaut, S. 1.3IGennaretti, M. 1.4DGerges, S. 1.1KGethin, D. 3.2HGharib, M. 1.3DGhose, S. 2.4FGhosh, A. 4.4LGiacomelli, E. 1.3HGiampà, A. 1.3HGiannopapa, C. 1.1DGill, C. M. 2.1E, 2.2EGill, P. 1.3JGilles, P. 1.1E, 1.4I, 2.2JGilman, T. 1.4C, 3.2CGiurgiutiu, V. 2.3AGlass, B. 4.3OGlunt, N. 1.3IGoble, W. M. 3.2KGoitia, R. 4.3OGoldak, J. 1.3EGolliard, J. 4.2K, 4.3KGong, J. 4.3HGonzalez, J. 2.1AGonzalez, M. 2.1A, 2.3J, 3.1OGoods, S. 4.2HGopalakrishnan, S. 2.2DGoto, Y. 4.1FGourdin, C. 2.2B, 2.2C, 3.2CGoyder, H. 2.3NGradle, R. J. 2.4K

Grant, K. R. 1.1LGrassini, U. 1.4HGravel, J.-P. 2.2HGray, J. H. 2.3JGray, M. 2.3C, 2.3KGraziani, G. 1.4DGreen, R. 4.1LGreiner, M. 4.1LGresil, M. 2.3AGries, T. 1.1AGriesbach, T. J. 1.1J, 2.1MGrisolia, O. 2.4DGros, L. 2.4KGross, D. 2.3HGross, R. 3.2KGrouthier, C. 3.2NGu, F. 4.1MGu, W. 4.1D, 4.2GGu, Y. 2.3HGuan, K. 1.1B, 1.4OGuan, W. 4.1IGuan, X. 3.2GGulhane, N. P. 2.4BGunnars, J. 1.3E, 3.1EGuo, L. 1.4GGuo, W. 2.1AGuo, Y. 2.3NGupta, N. 4.1LGurdal, R. 2.3CGustin, H. 2.3FHaddara, S. 2.4IHadji, A. 2.3NHadley, I. 2.2GHagège, B. 2.4IHagiwara, S. 3.2NHaik, Y. 2.3KHall, J. 1.1DHamada, S. 4.1HHamakawa, H. 4.4KHamelin, C. 2.2EHamid, Z. M. A. 4.2AHamouche, W. 2.4JHamouda, O. 2.3BHan, Ja. 2.1B, 2.2I, 4.1JHan, Ju. 2.3DHan, Yic. 1.1O, 3.2O, 4.1JHan, Yin. 2.2NHan, Z. 4.2LHannan, A. S. A. 4.2LHansen, F. 4.2KHantz, B. 2.4OHara, K. 1.3DHardy, S. 3.2HHari, Y. 2.1DHarlow, D. G. 3.2KHarris, D. O. 1.1JHarris, S. P. 3.2KHarrison, H. 2.3CHasegawa, K. 2.3I, 2.3MHashimoto, P. S. 4.1GHassan, M. 2.1N, 2.2N, 3.1N,

4.3K, 4.4KHassan, T. 2.1B, 2.1FHasumuma, S. 2.3F, 4.1C, 4.2H


53

Hawkins, A. 1.3AHay, C. A. 3.2LHazama, O. 4.2GHecht, T. 1.3GHein, H. 2.1DHeinz, B. 2.3KHeldt, J. 2.1MHenaff, G. 4.2HHensel, S. 4.1LHeo, E.-J. 4.4MHeritier, D. 2.4FHerter, K.-H. 2.4C, 3.2C, 4.4NHibino, H. 3.1IHicks, T. 1.1E, 2.4EHijazi, I. 3.1AHill, M. 1.4E, 2.2E, 2.3EHilsabeck, J. 3.1LHinnant, C. 2.4JHinz, G. 1.4MHioe, Y. 1.4AHippert, E. 2.2HHirai, H. 2.4AHirai, T. 1.4LHiraki, T. 3.2IHiraki, Y. 4.1EHirano, A. 2.4CHirata, K. 4.4NHirota, N. 2.2CHirota, T. 4.1DHirotani, T. 3.1IHirschberg, P. 1.3CHisatsune, M. 1.3MHiyoshi, Y. 4.2FHoang, P. 2.3M, 4.2LHojo, K. 2.1C, 2.1D, 2.3D, 3.2GHölzl, R. 1.3GHonda, T. 3.1JHorácek, J. 1.4DHorn, A. 2.1IHosokai, K. 4.4KHossain, S. 1.4EHou, D. 2.1AHou, H. 2.4KHou, Q. 4.3GHouston, E. 2.1MHu, M.-H. 4.2OHuang, C.-C. 2.1K, 2.2KHuang, K.-R. 2.1KHuang, Q. 1.4AHuang, Y. 4.3MHuang, Y.-N. 2.2F, 4.2JHuber, H. 4.4NHughes, M. 2.2BHughes, P. 2.3IHugill, P. 2.2JHuh, N.-S. 1.4B, 1.4J, 3.1BHurrell, P. 2.1EHutchings, M. T. 1.1OIannitti, G. 1.3I, 3.1MIbrahim, R. 1.4EIchihashi, I. 4.2EIiizumi, H. 1.3M, 2.4AIijima, T. 4.1H, 4.3HIkegami, J. 4.1C

Ikeuchi, T. 4.4HImaoka, T. 3.2IInaba, K. 3.1BInada, F. 1.1M, 2.3I, 2.4AInoue, T. 4.4NInoue, Y. 3.2DIshigaki, H. 4.1FIshihara, K. 4.1KIshii, N. 2.4NIshikawa, M. 4.4HIshikawa, Y. 2.1HIslam, N. 2.1BItatani, M. 4.2D, 4.4AIto, T. 4.2FItoga, H. 4.1H, 4.3HItoh, T. 4.3MIwamatsu, F. 3.1DIzuchi, H. 4.4LJackson, B. 4.3OJackson, C. N. 3.1LJacono, D. L. 2.4NJacquemoud, C. 1.1I, 1.4F, 1.4I,

2.2KJamal, A. 4.3NJamalyaria, V 1.1KJames, P. 1.3FJansson, L. 3.1JJanzen, V. 2.2N, 2.3NJar, B. 1.4AJarernprasert, S. 4.1FJarvis, J. 2.1JJazaeri, H. 1.1OJe, J. 2.4OJeon, J.-Y. 1.1J, 4.4MJeong, J. H. 2.3IJeong, J.-U. 1.4JJetter, R. 1.1CJeyaganesh, B. 3.1EJi, F. 4.3IJia, G. 4.2I, 4.3I, 4.4IJiang, H. 4.1AJiang, J. 4.2IJiang, Y. 4.3HJianhua, P. 4.4IJianping, Y. 2.3KJianrong, L. 2.3KJimbo, M. 4.3FJin, H. 3.2AJin, W. 1.1GJin, Y. 2.3NJin, Z. 2.2HJo, B. 3.1OJo, J. C. 4.3GJohnson, K. 2.1LJoly, P. 1.4FJones, C. 3.1AJones, S. 2.4IJose, V. 4.2LJouan, B. 3.2BJulan, E. 2.2JJung, G. 1.3KKai, S. 2.4AKalyanam, S. 1.4AKamaya, M. 2.1D, 3.2C, 4.2D

Kammerer, M. 2.4CKanasaki, H. 2.4CKanazawa, K. 3.2IKaneko, N. 1.3M, 2.4AKaneko, S. 1.3N, 2.3IKaneko, T. 3.2IKanezaki, T. 4.2HKang, J.-H. 3.2OKang, S.-J. 2.4BKarabaki, H. E. 2.1C, 2.3C, 3.2BKaramanos, S. A. 1.4MKarney, B. W. 2.1B, 2.2JKarpanan, K. 2.4I, 3.2HKasahara, N. 1.3B, 1.3G, 2.1H,

2.3O, 2.4BKataoka, S. 3.1JKatayama, Y. 4.4EKatke, G. S. 2.4BKato, S. 4.3EKatsumata, G. 3.1D, 4.1D, 4.2DKatsuyama, J. 3.1D, 4.1D, 4.2DKatz, J. 4.1NKawabata, S. 2.3DKawahara, A. 2.4EKawamura, K. 4.2FKawashima, Y. 4.4HKawate, K. 4.2FKawazoe, H. 2.2MKayser, Y. 1.1F, 1.3FKazemi, A. 1.4LKazeminia, M. 2.2BKeim, E. 1.1F, 1.3F, 1.4FKeller, M. 1.3AKeltjens, J. 3.1HKeogh, D. 2.1NKerkhof, K. 1.4MKesterson, M. 4.1LKhajehpour, S. 4.1GKheiri, M. 4.3N, 4.4NKikuchi, M. 3.1DKim, C. 4.2AKim, Da. 1.3DKim, Do. 2.4OKim, E. S. 3.2OKim, I. 4.3FKim, J. H. 4.1JKim, J. W. 1.1JKim, J. 2.4FKim, J.-S. 4.4MKim, K. 3.1BKim, K.-C. 4.3AKim, Ma. 2.3IKim, Minc. 2.4FKim, Mins. 1.3KKim, Mo. 2.4BKim, S.-H. 4.1JKim, S.-J. 4.2AKim, Y. 1.1J, 1.4J, 2.1B, 2.2I,

2.4O, 4.1J, 4.2A, 4.4MKimura, A. 4.2DKimura, K. 1.1O, 1.4OKingston, E. 1.3E, 2.1EKirk, M. 2.1D, 2.1M, 2.2DKirkemo, F. 1.4L, 3.2H

Kirkpatrick, K. 2.3AKitamoto, T. 1.3NKiwata, T. 3.2NKizawa, M. 2.2MKlucke, D. 2.1C, 3.2BKnisely, C. 2.4NKobayashi, R. 4.4NKobayashi, T. 1.3LKobayashi, Y. 2.2MKohler, C. 4.1CKoide, Y. 4.1FKojima, N. 2.1FKokufuda, T. 1.3BKondo, K. 1.1LKonishi, Y. 4.4HKono, T, 3.2NKono, Y. 2.2MKonosu, S. 4.1HKorst, H. 4.2KKoski, W. 1.4CKosugi, S. 3.2IKozanek, J. 1.3DKrishnaswamy, P. 1.4AKu, F. 1.1EKubushiro, K. 1.1OKultayev, Y. 1.3GKumar, R. A. 1.1NKumar, Santh. 4.2LKumar, Santo. 2.3BKummari, S. R. 2.4HKuo, H. H. 1.4BKupper, C. 2.3CKurihara, E. 4.4KKurihara, K. 3.2IKurth, E. 1.1EKurth, R. 3.1EKushima, H. 1.4OKytka, M. 4.3ALacroix, R. 2.3FLacroix, V. 2.3DLafrance, T. 4.2NLai, Z.-Y. 2.2FLainez, B. 2.3FLam, P.-S. 3.2A, 4.1ALamagnere, P. 2.3O, 3.2DLandron, C. 1.4FLangschwager, K. 3.2CLarsen, A. 1.4DLashley, M. 2.1MLaskar, A. 4.3ELauerova, D. 1.3FLauria, D. 4.2HLaurien, E. 4.4NLaurinat, J. E. 4.1LLe Delliou, P. 1.1F, 1.3ILe Moal, S. 2.3FLe Roux, J.-C. 2.1C, 2.1K, 3.1C,

3.2CLebarbe, T. 2.3O, 3.1L, 3.2D, 3.2DLee, B. 2.4FLee, D. 2.1MLee, H. 3.1BLee, H.-S. 4.1JLee, J. 4.3F


54

Lee, K. S. 1.4K, 3.1GLee, M.-Y. 1.1JLefrancois, E. 2.4ILei, B.-M. 2.1KLejeail, Y. 2.3O, 3.2DLejeune, H. 1.1L, 2.4LLengersdorf, M. 1.1ALeonard, F. 2.3BLevy, C. 1.3ILi, B. 2.3JLi, G. 2.2K, 4.4ILi, H. 1.3NLI, Ji. 4.3ELi, Ju. 1.4I, 2.4J, 4.1CLi, L. 4.3OLi, M. 1.1CLi, Qia. 2.3NLi, Qin. 4.1ILi, R. 4.4MLi, Shua. 2.1B, 2.2JLi, Shux. 1.1ALi, We. 4.3ILi, Wu. 4.3MLi, X. 4.1I, 4.2ILi, Yi. 2.3M, 3.1DLi, Yu. 1.1G, 3.2OLi, Zhe. 2.4KLi, Zhi. 4.3ILiang, J. 2.2HLiang, N. 2.3KLiao, W.-I 4.1F, 4.2ELigon, T. 2.3HLin, B. 2.3ALin, D. 4.3LLin, F.-R. 2.2F, 4.1FLin, Z.-Y. 4.1FLindner, P. 1.1OLing, X. 2.1I, 3.2A, 4.1ILinnemann, K. 3.1L, 3.1OLiszkai, T. 4.1NLiu, Che. 4.4ALiu, Chu. 4.2MLiu, Da. 4.1ILiu, De. 4.2I, 4.3I, 4.4ILiu, Go. 2.1B, 2.2JLiu, Gu. 2.1GLiu, J. 4.3ILiu, Q. 2.1JLiu, W. 3.2M, 4.3MLiu, Y.-F. 2.2FLiu, Ya. 4.2ILiu, Yu. 4.2LLiu, Z. 2.1ALock, W. 2.3J, 2.4JLockerby, D. A. 1.4NLoh, K. 1.4BLohse, C. 2.1MLokey, T. 1.1LLondon, T. 2.2ILu, K. 1.3CLu, S. 2.1I, 3.2ALu, W. 3.2ALucey, A. 1.3D, 1.4NLunde, K. 3.1C, 4.2K

Lundwall, J. 1.1MLuo, X. 2.3DLuo, Z. 4.3ALuxa, M. 1.4DLv, W. 4.2OLytwyn, M. 1.1BMa, K. 1.1B, 1.4OMa, Q. 1.3IMa, Y. 4.3AMabe, W. 1.1E, 2.4EMacdonald, K. 3.1CMacejko, B. 2.4HMachado, R. 2.1AMachida, H. 2.3O, 4.2DMackenzie, D. 1.3B, 1.3GMadew, C. 1.3F, 1.4JMadou, K. 1.4IMadrazo, V. 4.1CMaeda, T. 1.3NMaekawa, A. 2.4E, 4.4EMaggi, C. 1.3H, 1.4HMair, G. W. 1.1AMajumdar, S. 1.1CMak, C. W. 2.3MMalavasi, S. 1.3N, 3.1N, 4.3KMaleci, R. 2.1HMaleki, S. 1.3OMalik, M. H. 2.2AMaljaars, J. 3.1CMallet, M. 4.1NMally, T. 1.3AMalouines, P. 2.2G, 2.3F, 3.1FMandelli, S. 1.3NManeschy, J. E. 3.2BMann, A. 3.1L, 4.3LMano, Y. 4.3HMany, H. C. 1.1NManzo, E. 4.1LMarangone, F. D. C. 2.4MMarchesi, J. 3.1KMarie, S. 1.1F, 1.1I, 1.4F, 1.4I,

2.1B, 2.4JMarohl, M. 2.4GMarques, A. T. 1.1AMartin, G. A. S. 1.1GMartin, L. 2.4NMartin, M. 1.1BMartinez, M. 3.1OMartins, B. 4.4AMasaki, K. 4.1DMasuda, A. 4.1E, 4.2E, 4.3EMatheron, P. 2.3O, 3.2DMathew, J. 2.3BMathias, L. L. S. 2.2HMathkar, A. 2.2DMatsuda, A. 1.3O, 3.1B, 3.1OMatsumoto, K. 4.4NMatsunaga, H. 4.1H, 4.3HMatsuo, T. 4.3HMatsuoka, H. 4.4KMatsuoka, S. 4.3HMatsuoka, T. 4.1EMatsushita, M. 2.4BMatsuura, S. 2.4A

Mayinger, W. 2.1C, 2.3C, 3.2BMazzeo, J. 1.4KMcBrine, W. 3.1KMcCarthy, J. 2.2LMcGill, R. 2.1M, 2.4GMcirdi, K. 1.4I, 2.4J, 4.1CMcJones, S. 2.4KMcKie, N. 2.2OMcKillop, S. 1.4CMcKoon, C. 3.1LMcVinnie, G. 3.1MMeek, C. 3.2AMegens, B. 3.1HMehmanparast, A. 1.3O, 2.1OMehta, H. 2.1M, 2.3FMeier, G. 1.1FMeikle V, T. 2.3KMendez-Torres, A. 2.3AMenq, F. 4.3EMerah, N. 1.1EMerz, K. 1.1MMeshii, T. 1.3C, 2.3MMeskell, C. 1.4D, 2.1N, 3.2NMessa, G. V. 3.1NMesser, B. 1.4GMétais, T. 2.1C, 2.2C, 3.1CMichelin, S. 3.2NMiller, G. 1.4G, 2.1G, 2.3AMiller, J. 1.1E, 2.4EMillet, B. 2.3AMills, D. 2.4FMinagawa, K. 1.4B, 3.1B, 4.2JMinamiyama, A. 2.2MMinichiello, J. 2.3HMinorikawa, G. 4.4LMiorini, R. 4.1NMitchell, P. 2.4FMiura, N. 2.1DMiura, T. 1.3AMiyamura, T. 4.4HMiyazaki, K. 3.1DMiyoshi, Y. 2.2MMizuma, H. 2.4AMizuno, K. 4.3FMizuta, S. 2.4CMizutani, T. 2.4BMkrtchyan, H. 2.4KMoat, R. J. 2.3BModarres-Sadeghi, Y. 3.2NModini, S. 1.4DMoenssens, M. 2.4GMoffat, A. J. 1.4OMohamed, S. 4.2K, 4.4KMohany, A. 3.1N, 4.3K, 4.4KMohr, W. 2.4EMoinereau, D. 1.1F, 1.4FMongeau, L. G. 4.3NMoody, F. 4.3GMoogk, S. 4.4NMoran, T. 4.1OMoriconi, C. 4.2HMoriizumi, M. 1.3M, 2.4AMorita, R. 1.1M, 2.4AMoro, I. 4.1H

Morris, S. 4.1NMorrison, S. 2.1GMourad, A.-H. 4.3AMourgue, P. 1.1E, 2.3FMoussou, P. 4.1K, 4.3NMoustafa, K. 2.3KMuff, A. D. 3.2HMullen, J. 2.4EMullins, L. 3.1FMulthoff, J. B. 2.2AMulthoff, J. 1.1AMunson, D. 2.1JMurakawa, H. 2.4EMuransky, O. 1.4E, 2.2EMureithi, N. 1.3N, 2.1N, 2.2N,

2.3N, 4.2NMuroya, I. 2.1FMuscat, M. 1.1G, 2.2ANacer, M. H. 4.1LNagae, Y. 3.2DNagata, S. 3.2INagoshi, Y. 2.1DNagy, P. B. 2.3ANaik, Y. 1.3GNair, A. K. 1.1NNaito, K. 4.4ANakagawa, C. 4.2FNakajima, A. 3.2NNakaki, D. K. 4.1GNakama, S. 2.2MNakamura, H. 2.3O, 4.1D, 4.2GNakamura, I. 1.3M, 2.3ONakamura, T. 1.3B, 2.4BNakamura, T. 1.3N, 2.1N, 2.3I, 3.2NNakane, M. 2.4CNakanishi, T. 4.4HNakatsu, M. 2.4ANakayama, T. 3.1I, 3.2INam, H. 2.2INanba, S. 4.4HNanpo, M. 1.1MNaradate, K. 1.1MNassar, S. 1.4LNatesan, K. 1.1CNawandar, S. K. 1.1GNedelec, M. 2.2KNehrig, M. 3.1ONeill, D. 2.3JNelias, D. 2.2ENeme, A. 1.1DNewell, W. 1.3E, 1.3KNg, C. 1.3INguyen, T. 4.3NNibas, J. 4.2NNicak, T. 1.1F, 1.3FNickholds, S. 2.1JNie, D. 4.2MNiffenegger, M. 3.1KNikbin, K. 1.1I, 1.3O, 2.1O, 3.2K,

4.3MNishida, E. 4.4KNishiguchi, M. 4.4LNishihara, T. 2.3INishiyama, Y. 4.2D


55

Niu, Y. 4.4LNoble, R. 2.2G, 2.3L, 3.2LNoda, M. 2.2MNohara, M. 4.2ONomura, H. 2.1FNomura, M. 1.4LNomura, Y. 2.1CNorimono, T. 3.1INovarina, D. 1.3NNove, C. A. 4.1ONovotny, T. 2.3EO’Dowd, N. 1.1IO’Meara, N. 2.4EOberembt, C. 2.3EOchi, M. 2.1DOechsner, M. 3.2COgawa, N. 4.1DOgawa, Take. 2.3F, 4.1C, 4.2HOgawa, Taku. 4.2DOgunremi, A. 1.1NOh, C.-Y. 2.2IOh, Y.-R. 2.2IOhayon, R. 2.4IOhmi, T. 4.4HOhtori, Y. 1.1MOkada, H. 4.1DOkajima, S. 3.2DOkamoto, K. 3.1OOkimura, K. 2.2MOku, T. 2.4NOkuda, Y. 2.1HOkui, D. 4.4EOlala, S. 2.1NOlson, M. 2.2E, 2.3EOlson, R. 1.3IOmer, A. 4.4KOmiya, Y. 1.1L, 1.3L, 2.1LOnishi, H. 1.3NOnishi, S. 1.3M, 2.4A, 4.3FOnitsuka, S. 4.1FOnizawa, K. 3.1D, 4.1D, 4.2DOnizawa, T. 3.2DOrita, A. 4.3HOritani, N. 4.3FOryniak, A. 1.4GOrynyak, I. 1.1I, 1.4G, 3.1G, 3.1OOsage, D. A. 2.4H, 2.4OOsakabe, K. 3.1D, 4.1DOshkai, P. 1.4N, 4.1K, 4.2KOtani, A. 1.3M, 2.4A, 4.3FOtoyo, T. 2.4A, 4.3FOuld, P. 2.2CPace, R. 2.3FPacqueau, P. 2.1IPaidoussis, M. 4.3N, 4.4NPanzarella, C. 2.4O, 3.1HPaolacci, F. 1.4MPapatheocharis, T. 1.4MPapp, M. 4.2LParadowska, A. 1.4EPark, D.-Y. 2.2HPark, J.-S. 1.3I, 1.3JPark, Y. H. 3.1AParrot, A. 1.4F

Passeri, M. 1.3HPatel, D. 4.1MPatel, V. I. 2.2EPatrick, C. 1.3EPatrick, J. 4.2NPattinson, A. 2.2JPaulin, A. 2.3J, 2.4J, 3.1JPellegrino, A. 1.4DPellereau, B. 2.1EPelletier, E. 4.2NPenso, J. 1.3K, 3.1MPepin, A. 1.1IPerdikaris, P. C. 1.4MPereira, J. 4.4APereira, S. T. 1.3BPerez, M. 2.2EPerl, M. 1.1H, 1.3IPerotti, F. 1.3NPerry, J. 1.1HPetesch, C. 2.3O, 3.1L, 3.2DPettigrew, M. J. 2.1N, 2.2N, 4.2NPeyre, P. 2.2JPham, M. 2.2OPierrat, D. 2.4KPijpers, R. 3.1CPillot, S. 2.1I, 2.4FPinho, J. 2.4K, 4.3GPiteau, P. 4.1KPlagnard, T. 2.1N, 4.2NPoggianti, A. 1.4MPong, W. 4.1EPordal, H. 3.1MPower, B. 2.3JPrager, M. 2.4OPrakash, A. 4.3LProchazkova, D. 1.1MProwant, M. S. 1.1JPrueter, P. E. 2.4H, 4.2GPunch, E. 1.1EQian, C. 1.3G, 4.1I, 3.1KQian, Y. 4.3IQiao, D. 2.2E, 2.3EQin, C. 4.1IQin, M. 2.1E, 2.3EQin, Y. 1.4OQuayyum, S. 2.1BRadchenko, S. 3.1G, 3.1ORadu, V. 1.4JRaggi, A. 1.3HRambaud, P. 4.3GRan, A. 1.1NRane, S. 1.3GRanieri, P. 2.1GRathbun, H. 2.3MRaupp, S. 4.2LReddy, V. 1.4CReed, G. 2.2JReese, S. H. 2.1C, 2.3C, 3.2BReeves, D. 3.2LReich, A. 2.1KReinhardt, W. 1.3C, 1.4C, 4.1G,

4.2GRelangi, R. 2.1DRemans, D. 4.4N

Remy, E. 3.1KRettenmeier, P. 3.2CReynolds, J. 1.3KReza, M. S. 4.2JRice, D. 1.3LRichard, P. 1.1DRichards, A. J. 1.4NRiedelmeier, S. 1.1B, 4.3GRiley, D. 1.4ERistic, D. 2.1KRiznic, J. 2.2N, 2.3BRizzo, P. 4.1FRoarty, D. H. 1.3CRobin, V. 1.1E, 2.3FRoss, A. 2.2NRostamy, N. 1.1NRoth, A. 2.4CRoth, D. 4.2LRovagnati, B. 2.3JRoy, V. 3.1KRudland, D. 1.3J, 2.3E, 4.1JRudolph, J. 2.1C, 2.2G, 3.2B,

3.2C, 3.2GRuggieri, C. 2.2B, 2.2H, 2.2I,

4.2A, 4.2MRuggiero, A. 1.3I, 3.1MRyu, D.-I. 1.1JRyu, T.-Y. 3.1GSader, J. E. 1.3DSagawa, W. 3.1OSaito, K. 3.1DSaito, N. 1.1OSaito, T. 4.4ASakai, M. 2.4ASakai, S. 2.2KSakakibara, Y. 4.1MSakamoto, H. 4.1DSako, B. 4.3NSalehzadeh, A. 2.1HSallam, H. 1.1ISalt, E. 4.4KSamman, Ma. 2.4MSamman, Mo. 2.4MSan Marchi, C. 4.1H, 4.2H, 4.3H,

4.3HSanna, F. 4.2KSargentini, L. 1.1BSarzosa, D. F. B. 4.2MSasai, M. 1.4LSasajima, K. 1.3MSato, K. 1.3MSato, N. 3.2ISato, T. 3.1JSato, Y. 4.1FSawa, T. 1.1L, 1.3L, 2.1L, 2.3LSawada, K. 1.1O, 1.4OSawadogo, T. 2.1N, 2.2NScano, L. 2.4D, 3.2MScarth, D. 2.1M, 2.4G, 4.4ASchaaf, M. 2.4LSchendzielorz, H. 1.1FScherer, F. M. 1.1ASchildberg, H.-P. 2.3HSchlücker, E. 1.1B, 4.3G

Schmauder, S. 1.4MScholz, A. 3.2CScholz, I. 1.1ASchönfelder, T. 1.1ASchotte, J.-S. 2.4ISchrandt, C. 3.2MSchuler, X. 2.4C, 3.2C, 3.2G,

4.1C, 4.4NSchulte, M. 4.2OSchulz, A. 3.2MSchulz, M. 3.2MSchuurmans, P. 1.4NScipinotti, R. 1.4MScott, C. 3.2MSeichter, J. 2.1C, 3.2BSeidenfuss, M. 3.2GSeipp, T. 2.1G, 2.4M, 3.1LSera, T. 2.4CSerizawa, H. 2.4ESerizawa, R. 3.1DServer, W. 2.1D, 2.2DShademan, S. 2.2OShah, V. 4.2LSham, T.-L. 1.1CShao, G. 2.3AShao, S. 4.3ISharples, J. 1.3F, 1.3J, 1.4JSheikh, M. 1.1IShen, J. 1.1GShen, M.-Y. 2.2FShen, X. 1.4J, 4.1OShen, Y.-H. 4.2JSheridan, J. 2.4NSherry, A. H. 1.1I, 2.1I, 2.3BShi, Jia. 2.1AShi, Jin 3.2M, 4.3MShi, Jinh. 2.3OShi, S. 4.1MShibutani, T. 1.3MShim, D. J. 1.3J, 1.4A, 2.1M,

4.1D, 4.1JShimizu, H. 2.4A, 4.3FShimohara, H. 1.3NShintani, A. 4.2FShiradhonkar, S. 4.1FShiraki, K. 2.2MShirode, K. 1.3GShoulders, J. 2.1HShuaib, A. 1.1ESi, J. 2.3DSidhu, A. 2.1LSidlof, P. 1.4DSigrist, J.-F. 2.4NSilcher, H. 4.1CSilva, B. 3.2BSimha, H. 2.2HSinatra, R. 1.1GSindelar, R. 4.1ASingh, H. 2.2DSingh, H. 2.2DSingh, J. 2.1JSinha, R. 4.1FSkeels, H. B. 2.2OSlee, A. 3.2H


56

Slifka, A. 4.2HSlimp, B. 4.2LSmeulers, J. 4.4NSmith, B. 2.2N, 2.3NSmith, C. H. 2.4ISmith, D. 1.4E, 2.1ESmith, K. J. 2.4HSmith, M. C. 1.1I, 1.3F, 1.4ESmith, R. 2.1ISmith, S. D. 2.2G, 2.2I, 2.4ESoda, K. 2.4BSodeyama, H. 2.4ASogawa, N. 4.2HSolin, J. 2.1C, 2.3C, 4.1HSomerday, B. 4.1H, 4.3HSommerville, D. 2.1E, 2.1MSone, A. 4.1E, 4.2E, 4.3ESong, M. 1.4J, 4.1OSong, P. 4.3ISong, Sha. 2.1ESong, She. 2.1JSong, X. 4.1OSoppa, E. 4.1CSoppet, W. 1.1CSouza, J. 1.3ASouza, R. F. 4.2ASouza, R. 2.2BSoyama, H. 4.3HSpindler, M. W. 1.4OSprouster, D. 2.4FStakenborghs, R. 4.1O, 4.3OStalheim, D. 4.2HStefanovic, R. 1.4G, 2.1GSteininger, D. 3.2BSteinmann, P. 2.1C, 3.2GStepan, M. 1.4DStephens, H. 3.2F, 4.1OSterthaus, J. 3.1L, 3.1OStevens, G. 1.3C, 1.4C, 2.1D,

2.1M, 2.2DStobbart, J. 3.2HStolz, C. 2.2JStonehouse, M. 2.3J, 2.4M, 3.1JSu, F. H.-C. 4.2ESu, H.-C. 4.3ESubramanian, K. 3.1MSueur, R. 3.1KSugawara, S. 4.4HSugita, T. 4.1ESulley, J. 2.4FSumitani, T. 3.2NSumner, D. 1.1N, 1.3NSun, L. 4.1ISunakoda, K. 4.1ESuzuki, O. 2.2MSuzuki, Y. 1.3MSvácek, P. 1.4DSzidarovszky, M. 2.4DTada, N. 4.2OTaheri, S. 2.1K, 2.2JTai, K. 1.3MTajima, M. 2.2MTajima, S. 4.2GTakagi, Y. 1.3L

Takahama, R. 3.1ITakahashi, J. 2.2KTakahashi, K. 3.1BTakahashi, S. 2.3ITakahashi, T. 4.4ETakakuwa, O. 4.3HTakamura, N. 1.3MTakamura, R. 1.3CTakanashi, M. 4.1CTakaya, S. 3.2DTakayama, Ya. 2.2CTakayama, Yo. 2.2CTakazawa, H. 3.1DTakeda, K. 3.1BTakeda, M. 3.1JTakei, K. 4.4HTakeuchi, Y. 3.1ITalaat, M. M. 4.1GTang, X. 2.3K, 4.1M, 4.3ITang, Y. 4.3ETanigawa, H. 1.3N, 4.4NTaniguchi, A. 2.2MTaniguchi, M. 4.1CTaniguchi, T. 4.4E, 4.4ETanimoto, T. 3.1JTao, C. 4.2ITarrant, K. 3.2NTateno, M. 1.3ATaylor, C. 2.3NTeixeira, P. 2.1A, 2.3JTeng, H. 2.1ETerada, S. 4.4HTesta, G. 1.3I, 3.1MThigpen, B. 4.3OThomas, K. 2.4IThomas, S. 2.4DThomas, W. 3.2HTian, Y. 2.4KTijsseling, A. 1.4B, 4.3GTinoco, E. B. 2.4MTkaczyk, T. 1.1IToft, A. 1.3FTognarelli, L. 1.4HTokuda, K. 1.3OTomko, J. 4.1NTon That, Y. 1.1LTorab, H. 1.1HToyoda, M. 2.2CTran, M. N. 1.4ETran, V.-X. 2.1KTranchand, B. 2.1B, 2.4JTrieglaff, R. 3.2MTroyer, G. 2.1GTsai, C.-S. 1.1M, 4.2E, 4.3ETsigklifis, K. 1.3DTsubaki, S. 1.1LTsudome, H. 3.2ITsuji, T. 2.4NTsujita, K. 4.2FTsukimori, K. 1.3M, 2.4ATu, S. T. 4.2O, 4.3MTucker, P. 1.4GTurnbow, M. 3.1FTurnquist, M. 2.4M

Twite, M. 2.2CUchida, M. 4.2OUddin, M. 2.2FUdyawar, A. 1.3IUemori, R. 4.1HUeno, T. 3.2NUesaka, M. 2.1FUeyama, S. 4.3EUmeki, Y. 3.1IUmemura, K. 4.4NUtz, S. 4.1CVaglini, C. 1.3HValdovinos, J. 4.1EVan Beek, P. 3.1C, 4.2Kvan Bokhorst, E. 4.4Nvan der Linden, B. 1.1Dvan der Putte, J. 4.4Nvan Ravenhorst, J. 1.1AVan Tichelen, K. 1.4NVan Wittenberghe, J. 3.1AVarelis, G. E. 1.4MVargas, P. 1.4GVasileiou, A. 3.1EVeiga, J. 1.1L, 2.4LVenev, Y. 3.1JVenkatesh, M. 2.4BVeron, E. 2.4NVieira, A. 2.1JVierendeels, J. 1.4NVijay, D. K. 2.3JViolato, D. 4.3KVlcek, V. 1.3D, 1.4DVock, P. A. 2.4KVyvial, B. 1.4KWacker, R. 2.2LWada, Y. 4.4HWagner, J. 3.2BWahba, E. 2.4IWakai, T. 3.2DWalker, R. 1.3AWall, J. 4.3OWalsh, J. 2.2EWalter, M. 2.1E, 3.2CWang, Ba. 1.4AWang, Bi. 4.2IWang, Chen 4.2M, 4.4IWang, Cheng. 4.3MWang, G. 1.4GWang, Ho. 4.1AWang, Hua. 2.3DWang, Hui 4.2IWang, Jia. 2.1G, 2.3NWang, Jih. 1.1AWang, Jin. 4.1IWang, Jio. 3.2GWang, Jy. 4.1AWang, T. 4.3EWang, Wei. 4.2IWang, Wen. 2.3AWang, X. 2.2HWang, Y.-M. 1.1MWang, Yanf. 4.3HWang, Yanl. 1.1C, 2.2EWang, Yi. 4.3M

Wang, Zhe 4.2I, 4.3IWang, Zhen. 4.2O, 4.4IWang, Zho. 3.2AWang, Zi. 2.4KWarda, H. 2.4IWarwick, J. 4.3OWasylyk, A. 2.3F, 3.1FWatakabe, T. 1.3M, 2.4AWatanabe, D. 2.3D, 3.2GWatanabe, M. 1.3DWatanabe, O. 1.3O, 3.1B, 3.1OWatanabe, Sh. 4.4MWatanabe, So. 3.2DWatanabe, T. 4.2DWaterland, J. 1.3L, 2.1L, 2.2LWatson, C. 3.1CWeaver, D. S. 2.1N, 2.3BWebber, T. 4.4NWebster, G. 2.1OWeck, A. 1.3EWei, Z. 3.2K, 4.3MWeidner, R. 2.4FWeissenberg, T. 2.4CWeitze, B. 1.4CWeiZhong, L. 4.2IWetmore, W. 2.3KWhalen, C. 1.3AWhan, T. G. 2.3NWhipple, R. 2.3AWhite, M. 1.4OWilhelm, P. 2.1C, 2.2GWilkins, S. 1.1DWilkowski, G. 2.2F, 4.1DWille, F. 3.1LWilluweit, A. 3.2GWink, R. 1.1HWintle, J. 2.2GWithers, P. J. 2.4EWojnar, J. 1.4HWolfe, K. 3.2BWon, M. G. 1.4BWong, K. W. L. 2.4NWoo, W. 3.1EWoods, K. 2.3FWormsen, A. 3.2HWright, K. 3.1CWu, C. 1.1KWu, D. 2.3KWu, J. 1.4AWu, X.-X. 2.1KWu, Y. 3.2GXavier, J. 4.4AXia, L. 4.3IXiaohui, C. 4.2MXie, G. S. 4.2IXie, G. 3.2MXing, X. 1.1KXiong, A. 1.3GXiong, Q. 4.1IXu, F. 4.3IXu, He. 4.1NXu, Ho. 2.1OXu, Sh. 2.1GXu, St. 2.1M


57

Xu, W. 2.3NXu, X. 1.3NXu, Y. 2.3HXu, Z. 1.4AXuan, F.-Z. 4.2O, 4.3MXue, L. 4.2AXue, X. 4.1MYamabe, J. 4.1HYamada, M. 4.4HYamada, S. 3.1DYamaguchi, M. 3.2NYamamoto, H. 4.1HYamamoto, Ka. 2.2MYamamoto, Kei 2.4BYamamoto, Ken. 2.1CYamamoto, M. 4.2DYamamoto, T. 4.3FYamane, K. 4.1EYamashita, T. 3.2DYamauchi, T. 4.2EYamazaki, J. 2.1FYan, H. 4.2IYan, Y. 4.3EYan, Z. 2.3DYang, B. 1.4GYang, G. 4.1IYang, Sh. 1.4AYang, Si. 2.1I, 3.2AYang, Xia. 1.1I, 1.4IYang, Xin. 2.1I, 3.2AYang, Y.-P. 2.4EYang, Ya. 1.3EYang, Yu. 2.3DYang, Z. 1.4GYatomi, M. 1.3OYe, C. 4.2IYe, J. 4.2MYe, Y. 4.3IYescas, M. 1.4FYetisir, M. 4.1GYinpei, W. 4.2MYokobori Jr., A. T. 4.4HYoneda, K. 4.4MYoo, S. C. 4.1JYoshida, Ka. 4.1EYoshida, Ki. 1.3OYoshida, S. 2.1F, 3.1AYoshida, T. 4.2HYoshii, K. 2.3MYoshikawa, M. 4.1HYoshimoto, K. 4.2DYounan, M. Y. A. 1.1I, 3.1J, 4.1NYoung, G. 3.1KYoung, K.-J. 2.3HYu, C.-C. 2.2F, 4.2JYu, Hon. 1.3GYu, Hou. 4.3IYu, L. 2.3AYu, M. 4.3AYu, X. 2.2E, 2.3EYu, Y. 1.1KYuan, P. 2.1HYuga, M. 4.1HYukawa, M. 3.1I

Yulong, L. 3.1DZaki, A. 1.4LZarazovskii, M. 1.1I, 3.1GZeng, L. 3.1JZhang, Ca. 4.1NZhang, D. 1.4GZhang, Go. 1.4IZhang, Gu. 4.1IZhang, H. 1.4J, 4.1OZhang, Jim. 4.1IZhang, Jin. 2.1EZhang, Ju. 4.3IZhang, K. 4.3MZhang, L. 1.1BZhang, P. 4.2OZhang, T. 2.2FZhang, X. 4.1IZhang, Ya. 3.2AZhang, Yo. 2.4KZhang, Z. 4.2IZhao, Jia. 1.3EZhao, Jir. 4.3IZhao, M. 1.4GZhao, Y. 2.1GZheng, G. 1.4EZheng, J. 2.1AZhou, S. 4.2OZhou, X. 1.3GZhou, Ya. 2.1AZhou, Yu 1.1N, 1.1O, 3.2O, 4.1JZhou, Yuf. 3.2MZhu, J. 3.2OZhu, X. 2.2H, 4.2AZiada, S. 4.2K, 4.4KZisis, I. 1.1DZoghlami, S. 3.1NZolotarev, I. 1.3DZu, L. 1.1AZuo, L. 1.1K


58

HYATT REGENCY ORANGE COUNTY

First Floor

Second FloorNorth Tower

Second FloorSouth Tower

59

PVP 2015Boston

Boston Park PlazaJuly 19–23, 2015

ASME Pressure Vessels & Piping ConferenceNew Frontiers in Pressure Vessels and Piping

PVP-2015 Join us in historic Boston, Massachusetts for the 2015 ASME Pressure Vessels & Piping Conference! More than 180 paper and panel sessions are planned,as well as tutorials, Non-Destructive Examination (NDE) and Software demonstration forums, and the 23rd Rudy Scavuzzo Student Paper Symposium and Competition.The PVP Conference is a great place to present your ideas and to meet colleagues as we work to create and advance Pressure Vessel and Piping technologies for ourglobal community of practice. The PVP Conference is a recognized forum for fruitful exchange of ideas with participants from over 40 countries in Europe, Africa, theMiddle East, Asia, the Americas, and the Oceania islands. The ASME Pressure Vessels & Piping Division will sponsor the PVP-2015 Conference with participation bythe ASME NDE Division. GENERAL TOPICS: (1) Codes & Standards; (2) Computer Technology & Bolted Joints; (3) Design & Analysis; (4) Fluid-Structure Interaction; (5) High Pressure Tech-nology; (6) Materials & Fabrication; (7) Operations, Applications & Components; (8) Seismic Engineering; (9) Non-Destructive Examination; and (10) 23rd Rudy ScavuzzoStudent Paper Symposium and Competition. SCHEDULE: Abstracts are due by November 10, 2014. Authors will be notified of abstract acceptance by December 1, 2014. Draft papers are due by February 9,2015. Paper peer review comments will be returned by March 9, 2015. A Copyright Agreement Form for each paper must be submitted by April 1, 2015. The final man-uscripts in the standard ASME format for publication must be received by April 6, 2015. All presented technical papers will be published as referenceable documentsavailable post-conference via hardcopy or electronic media.INFORMATION: The conference website URL is: http://www.asmeconferences.org/PVP2015/. Technical paper abstracts must be submitted electronically through thewebsite. Visit the website for additional information.

PVP Conference Chair PVP Technical Program ChairMarina B. Ruggles-Wrenn Douglas A. Scarth

Air Force Institute of Technology Kinectrics Inc.2950 Hobson Way 800 Kipling Ave

WPAFB, OH 45433-7765, USA Toronto, Ontario, CanadaPhone: 937-255-3636 ext. 4641 Phone: 416-207-6000 ext 6383 / 416-207-6094

Email: [email protected] E-mail: [email protected] Chair

Carl E. JaskeDet Norske Veritas (USA), Inc.

5777 Frantz Road Dublin, OH 43017-1386, USA

Phone/Fax: 614-761-6916 / 614-761-1633 E-mail: [email protected]

ASME 2014 Pressure Vessels & Piping Conference

ASME

Two Park Avenue

New York, NY 10016-5990

www.asme.org

A Sincere Thanks to Our Sponsors

Silver Sponsors

Bronze Sponsors

Refreshment Break Sponsors

Innovation and Imagination in Pressure Vessels and Piping ...

Documents

Transcript of Innovation and Imagination in Pressure Vessels and Piping ...