Inline Slider Specification File - Originbs 8888:2013 iso 8015:2011 tolerancing this information and...

Inline SliderSpecification File

Contents

Specification Overview

Security

Optional Extras

Inline Slider Make-Up

Performance and Limitations

Master Configurations

Technical Drawings

Installation Guide

04

07

08

09

10

11

16

40

3

4

Specification OverviewThermally Broken Aluminium Inline Slider

Profile specificationFrame Depth 2 options: 116mm (double track) and 182mm (triple track)

Sightline 20mm interlockers, 159mm central locking stiles (if used)

Track Height 44mm (double and triple track)

Maximum Individual Panel Size 2200mm wide x 3000mm tall* *individual panels cannot exceed 6sqm

*the height of an individual panel cannot exceed 3 times its width

Minimum Individual Panel Size 550mm wide x 1600mm tall

Internal view of

the Origin Inline Slider

External view of

the Origin Inline Slider

5

Inlin

e Sl

ider

FeaturesOptions and extras

Glazing options

Up to a 20-year guarantee including gaskets and seals*

Up to a 10-year guarantee on glass*

Ultra-slim 20mm sightlines

Available in any RAL finish

Concealed running gear and track

Minimum of 6 points of locking (internal lever and cylinder only)

Weather testing BS6375 part 1 certified

Can accommodate large panel sizes

Up to 6 panelled configurations - these can be all sliding or a combination of fixed and sliding

All RAL colours available

Lever options: 7015M, 7016M, 9005M, 9910G

Drip bar available

180mm and 225mm cill options available

Structurally bonded system (Fixed panels will require bonding on site by the installer)

The premium low-e toughened glass used is a dependable double glazed unit. Constructed of two toughened sheets - a minimum of 6mm on both the inward and outward facing panes, making it highly durable as well as thermally efficient.

*Guarantee based on location of where the doors will be installed. Full terms and conditions can be found on the Origin website - origin-global.com/terms-and-conditions.

6

The Origin Inline Slider is available in over 150 colours...

Anthracite Grey (7016M)

RAL 4010

RAL 5013

RAL 6027

Jet Black (9005M) Black Grey (7021M)

RAL 6019 RAL 2004

RAL 7001 RAL 1003

RAL 6021 RAL 5023

ANYRAL

COLOUR6

WEEKLEAD TIME

Covering everything from the favourite metallic shades through to the more extensive palettes, we’ve got a colour available that’s guaranteed to suit any home or building style.

For the full range, visit origin-global.com

Dual colour and woodgrain options are not available.

Specification overview

7

Inlin

e Sl

ider

Security

Each door is equipped with an ultra-secure multi-point locking system, which features a minimum of six points of locking. Depending on the size of the door, this may increase.

TS007 1 star cylinder

Origin’s Multi-Point Lock

Cylinder

Internal cylinder only

8

Optional ExtrasHandles

Every Inline Slider is fitted with a flush-faced lever handle, which offers a look as sleek as the doors themselves.

It’s available in four attractive colours: 9910G, 7015M, 7016M, 9005M

Drip BarA drip bar option is available. It is situated towards the bottom of the door to deflect rainwater and prevent large pools of water from gathering.

225mm cill

Choose from our 2 cill options. These can also be powder-coated to match the doors.

Cills

180mm cill

9

Inlin

e Sl

ider

Inline Slider Make-Up

InlineHandle

JambSliding to Sliding

Interlocker

Top Track

Frame

Bottom Track

Make-up is dependent on the configuration chosen.

10

Standard Glass 6 or 8mm Toughened / Warm edge / Low E Toughened

Laminate 6.8 and 8.8 Glass 6.8 or 8.8mm Laminated / Warm edge / Low E Toughened

Solar Reflective Sunguard SN 70/37

Performance and Limitations

u-Value 1.4W/m²K

Origin Thermal Ratings

Weather Rating

Glazing Specifications

Air Permeability Class 4

Water Tightness Class 7A

Resistance to Wind Load Class A3

Exposure Category 1200

Size Limitations

Maximum individual panel size:

2200mm wide x 3000mm tall*

*individual panels cannot exceed 6sqm.

The height of an individual panel cannot

exceed 3 times its width

Minimum individual panel size:

550mm wide x 1600mm tall

BS6375 Parts 1, 2 and 3 Certified New Build

and Extensions 2.0 W/ (m2K)

Replacements 1.8 W/ (m2K)

Energy Rating E or better

All doors must conform to

these requirements

Building Regulation RequirementsPerformance Testing

AccreditationISO 9001

11

Inlin

e Sl

ider

2 panel

3 panel


4 panel

6 panel

12

Master Configuration: 2 panel (2+0)

Key features Both panels can be

sliding, or one can be fixed with one sliding

Traditional patio door style

See Configuration Key for section detail

2+0

See page 11 for configurations

16

15 156

14

2+0 ConfigurationSliding Left

SCALE A3 @ 1:10

LEAD DOOR

INTERNAL

EXTERNAL


13

Inlin

e Sl

ider

Configuration Key

See page 21 See page 29

6 - Sliding interlocker to sliding interlocker detail

14 - Sliding panel to double frame (bottom track) detail

See page 31

16 - Sliding panel to double frame (top track) detail

15 - Sliding panel to double frame (jamb) detail

SLIDER DETAIL DRAWINGSliding Interlocker to Sliding Interlocker Detail

226

20

INTERLOCKER

INTERLOCKER BEAD

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F

TEL: 0845 450 6662www.origin-global.com

ALL DIMENSIONS IN mm. DO NOT SCALE.

A4SHEET SIZEPROJECTION

SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE

ORIGIN FRAMES LTD., Sands 10 Industrial Estate,Hillbottom Road, High Wycombe, Buckinghamshire, HP12 4HS

CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.

GENERAL TOLERANCETHIS DRAWING CONFORMS TO

SURFACE FINISH

BS 8888:2013

ISO 8015:2011TOLERANCING

THIS INFORMATION AND DRAWING ARE THE COPYRIGHTOF ORIGIN FRAMES LIMITED. COPYRIGHT RESERVEDBY THEM AND IS ISSUED ON THE CONDITIONTHAT IT IS NOT COPIED OR DISCLOSED BYOR TO ANY UNAUTHORISED PERSONS WITHOUTPRIOR CONSENT OF ORIGIN FRAMES LIMITED.

RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000712

2

Sliding Interlocker toSliding InterlockerDetail

1 OF 1

± --

± --

SLIDER DETAIL DRAWINGSliding Panel to Double Frame (Jamb) Detail

105

116

44

FRAME COVER

LOCKSTILE

BRUSH GASKET

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000708

2

Sliding Panel to Double Frame (Jamb)Detail

1 OF 1

± --

± --

SLIDER DETAIL DRAWINGSliding Panel to Double Frame (Bottom Track) Detail

44

BOTTOM SASH

RUNNING GEAR

116

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000716

2

Sliding Panel to DoubleFrame (Bottom Track)Detail

1 OF 1

± --

± --

SLIDER DETAIL DRAWINGSliding Panel to Double Frame (Top Track) Detail

TOP SASH

ANTI-LIFT PACKER

44

116

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000717

2

Sliding Panel to DoubleFrame (Top Track)Detail

1 OF 1

± --

± --

See page 30

14

INTERNAL

EXTERNAL LEAD DOOR

2+1 ConfigurationSliding Left

SCALE A3 @ 1:15

Master Configuration: 3 panel (shown is 2 sliding and 1 fixed - 2+1)

Key features Fixed pane can be specified

on the left or right

All panels can slide or flexible opening

See Configuration Key for section detail

2+1

13 19

12 1 6 18

1711


See page 11 for configurations

15

Inlin

e Sl

ider

182

EXTERNAL

INTERNAL

SLIDER DETAIL DRAWINGSliding Panel to Triple Frame (Jamb) Detail

44

105

FRAME COVER

FRAME INSERT COVER

LOCKSTILE

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000710

2

Sliding Panel to Triple Frame (Jamb)Detail

1 OF 1

± --

± --

SLIDER DETAIL DRAWINGFixed Interlocker to Sliding Interlocker Detail

226

20

INTERLOCKER

INTERLOCKER BEAD

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000711

2

Fixed Panel to Double Frame (Jamb)Detail

1 OF 1

± --

± --

Configuration Key


1 - Fixed interlocker to sliding interlocker detail

11 - Fixed panel to triple frame (bottom track) detail


13 - Fixed panel to triple frame (top track) detail

17 - Sliding panel to triple frame (bottom track) detail


18 - Sliding panel to triple frame (jamb) detail

19 - Sliding panel to triple frame (top track) detail

See page 21

6 - Sliding interlocker to sliding interlocker detail


226

20

INTERLOCKER

INTERLOCKER BEAD

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000712

2


1 OF 1

± --

± --

182

44

SLIDER DETAIL DRAWINGFixed Panel to Triple Frame (Bottom Track) Detail

INTERNAL EXTERNALWEDGE GASKET

STAINLESS RUNNER

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000718

2

Fixed Panel to TripleFrame (Bottom Track)Detail

1 OF 1

± --

± --

See page 27

12 - Fixed panel to triple frame (jamb) detail

182

EXTERNAL

INTERNAL

SLIDER DETAIL DRAWINGFixed Panel to Triple Frame (Jamb) Detail

44

FRAME COVER

FRAME INSERT COVER

WEDGE GASKET

20 24 FRAME BEAD

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000709

2

Fixed Panel to Triple Frame (Jamb)Detail

1 OF 1

± --

± --

182

44

SLIDER DETAIL DRAWINGFixed Panel to Triple Frame (Top Track) Detail

EXTERNALINTERNAL

WEDGE GASKET

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000719

2

Fixed Panel to TripleFrame (Top Track)Detail

1 OF 1

± --

± --

SLIDER DETAIL DRAWINGSliding Panel to Triple Frame (Bottom Track) Detail

44

182

59

BOTTOM SASHSTAINLESS RUNNER

RUNNING GEAR

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000720

2

Sliding Panel to TripleFrame (Bottom Track)Detail

1 OF 1

± --

± --

SLIDER DETAIL DRAWINGSliding Panel to Triple Frame (Top Track) Detail

44

182

59

TOP SASH

ANTI-LIFT PACKER

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000721

2

Sliding Panel to TripleFrame (Top Track)Detail

1 OF 1

± --

± --

16

SLIDER DETAIL DRAWINGFixed Interlocker to Sliding Interlocker Detail

226

20

INTERLOCKER

INTERLOCKER BEAD

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000711

2


1 OF 1

± --

± --

1 Fixed interlocker to sliding interlocker detail

Technical Drawings

17

Inlin

e Sl

ider

2 Flush fixed interlocker to sliding shallow interlocker

FLUSH FIXED INTERLOCKER

INTERLOCKER BEAD

SHALLOW INTERLOCKER

20

151

18

FLUSH INTERLOCKER

INTERLOCKER BEAD

SHALLOW INTERLOCKER

20

144

3 Flush interlocker to sliding shallow interlocker

Technical Drawings

19

Inlin

e Sl

ider

4 Fixed shallow interlocker to sliding shallow interlocker

FIXED SHALLOW INTERLOCKER

INTERLOCKER BEAD

SHALLOW INTERLOCKER

20

186

20

5 Sliding shallow interlocker to sliding shallow interlocker

SHALLOW INTERLOCKER

INTERLOCKER BEAD

SHALLOW INTERLOCKER

20

186

Technical Drawings

21

Inlin

e Sl

ider

5 Sliding shallow interlocker to sliding shallow interlocker


226

20

INTERLOCKER

INTERLOCKER BEAD

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000712

2


1 OF 1

± --

± --

6 Sliding interlocker to sliding interlocker detail

22

Technical Drawings

116

44

SLIDER DETAIL DRAWINGFixed Panel to Double Frame (Bottom Track) Detail


STAINLESS RUNNER

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000714

2

Fixed Panel to DoubleFrame (Bottom Track)Detail

1 OF 1

± --

± --

7 Fixed panel to double frame (bottom track) detail

23

Inlin

e Sl

ider

SLIDER DETAIL DRAWINGSliding Panel to Sliding Panel Detail

159

86

SASH REBATESLAVE DOOR

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000713

2

Sliding Panel to Sliding Panel Detail

1 OF 1

± --

± --

8 Sliding panel to sliding panel detail

24

Technical Drawings

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000707

2


1 OF 1

± --

± --

SLIDER DETAIL DRAWINGFixed Panel to Double Frame (Jamb) Detail

44

116INTERNAL

EXTERNAL

FRAME BEAD

WEDGE GASKET

FRAME INSERT COVER

FRAME COVER

9 Fixed panel to double frame (jamb) detail

25

Inlin

e Sl

ider

116

44

SLIDER DETAIL DRAWINGFixed Panel to Double Frame (Top Track) Detail

EXTERNALINTERNAL

WEDGE GASKET

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000715

2

Fixed Panel to DoubleFrame (Top Track)Detail

1 OF 1

± --

± --

10 Fixed panel to double frame (top track) detail

26

Technical Drawings

182

44

SLIDER DETAIL DRAWINGFixed Panel to Triple Frame (Bottom Track) Detail


STAINLESS RUNNER

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000718

2

Fixed Panel to TripleFrame (Bottom Track)Detail

1 OF 1

± --

± --

11 Fixed panel to triple frame (bottom track) detail

27

Inlin

e Sl

ider

182

EXTERNAL

INTERNAL

SLIDER DETAIL DRAWINGFixed Panel to Triple Frame (Jamb) Detail

44

FRAME COVER

FRAME INSERT COVER

WEDGE GASKET

20 24 FRAME BEAD

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000709

2

Fixed Panel to Triple Frame (Jamb)Detail

1 OF 1

± --

± --

12 Fixed panel to triple frame (jamb) detail

28

182

44

SLIDER DETAIL DRAWINGFixed Panel to Triple Frame (Top Track) Detail

EXTERNALINTERNAL

WEDGE GASKET

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000719

2

Fixed Panel to TripleFrame (Top Track)Detail

1 OF 1

± --

± --

13 Fixed panel to triple frame (top track) detail

Technical Drawings

29

Inlin

e Sl

ider

SLIDER DETAIL DRAWINGSliding Panel to Double Frame (Bottom Track) Detail

44

BOTTOM SASH

RUNNING GEAR

116

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000716

2

Sliding Panel to DoubleFrame (Bottom Track)Detail

1 OF 1

± --

± --

14 Sliding panel to double frame (bottom track) detail

30

SLIDER DETAIL DRAWINGSliding Panel to Double Frame (Jamb) Detail

105

116

44

FRAME COVER

LOCKSTILE

BRUSH GASKET

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000708

2

Sliding Panel to Double Frame (Jamb)Detail

1 OF 1

± --

± --

15 Sliding panel to double frame (jamb) detail

Technical Drawings

31

Inlin

e Sl

ider

SLIDER DETAIL DRAWINGSliding Panel to Double Frame (Top Track) Detail

TOP SASH

ANTI-LIFT PACKER

44

116

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000717

2

Sliding Panel to DoubleFrame (Top Track)Detail

1 OF 1

± --

± --

16 Sliding panel to double frame (top track) detail

32

SLIDER DETAIL DRAWINGSliding Panel to Triple Frame (Bottom Track) Detail

44

182

59

BOTTOM SASHSTAINLESS RUNNER

RUNNING GEAR

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000720

2

Sliding Panel to TripleFrame (Bottom Track)Detail

1 OF 1

± --

± --

17 Sliding panel to triple frame (bottom track) detail

Technical Drawings

33

Inlin

e Sl

ider

182

EXTERNAL

INTERNAL

SLIDER DETAIL DRAWINGSliding Panel to Triple Frame (Jamb) Detail

44

105

FRAME COVER

FRAME INSERT COVER

LOCKSTILE

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000710

2

Sliding Panel to Triple Frame (Jamb)Detail

1 OF 1

± --

± --

18 Sliding panel to triple frame (jamb) detail

34

SLIDER DETAIL DRAWINGSliding Panel to Triple Frame (Top Track) Detail

44

182

59

TOP SASH

ANTI-LIFT PACKER

ANGULAR:

LINEAR:

2 3 41

E

D

C

B

A

F




SHEETREVISION

DOCUMENT TYPE

APPROVED

DRAWN

SCALE


CHECKED

DATE

DATE

DATE

SIGNATURE

SIGNATURE

SIGNATURE

DRAWING NO.

MATERIAL

DRAWING TITLE

PART NO.


SURFACE FINISH

BS 8888:2013



RK

CW

MZ

09/05/2017

09/05/2017

09/05/2017

PART DRAWING1:2

----

--

0000721

2

Sliding Panel to TripleFrame (Top Track)Detail

1 OF 1

± --

± --

19 Sliding panel to triple frame (top track) detail

Technical Drawings

35

Inlin

e Sl

ider

20 Drip bar (optional extra)

All dimensions are in mm. Do not scale.

Drip Bar (120mm) P193 0002540 1

DESCRIPTION PART No. DRAWING No. REV

120

15,5 4°


Drip Bar (150mm) P192 0002541 1


150

15,5 3°


Drip Bar (60mm) P140 0001894 2


15,5

60

8°

36

21 Drainage details double frame

Technical Drawings

44

116

116

44

INTERNAL EXTERNAL

Frame Drainage with Fixed Panel

21. Drainage Details Double Frame

Frame Drainage

NOTE:For maximum weather performance, drainage slots are required at maximium 400mm centres along the frame.Face drainage ONLY is available.

37

Inlin

e Sl

ider

22 Drainage details triple frame

182

4444

182

INTERNAL EXTERNAL

Frame Drainage with Fixed Panel

22. Drainage Details Triple Frame

Frame Drainage

NOTE:For maximum weather performance, drainage slots are required at maximium 400mm centres along the frame.Face drainage ONLY is available.

38

23a Cill details double frame

Technical Drawings

��

��

��

��

�

�

�

�

�

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

�

�

��

��

��

180

180mm CillP997

39

Inlin

e Sl

ider

��

��

��

��

�

�

�

�

�

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

�

�

��

��

��

��

225

225mm CillP996

23b Cill details triple frame

40

1. Prepare the opening

Measure aperture width.

Measure aperture height.

FIG 1

FIG 2

Installation Guide

41

Inlin

e Sl

ider

Level the threshold in both directions, packing every 500mm apart for the length of the opening.

Lay frame profiles in front of

aperture, being careful not

to scratch the powder coat.

FIG 3

FIG 4

42

2. If applicable, join the top/ bottom frame profiles together

Apply suitable sealant on ends of profile and around the pre-inserted frame connectors.

FIG 5

Installation Guide

43

Inlin

e Sl

ider

Connect the frame

profiles together.

Fix the frame profiles

together and repeat for

remaining frame pieces.

FIG 6

FIG 7

44

3. Connect the jambs and bottom track

Apply suitable sealant to profile ends.

FIG 8

Installation Guide

45

Inlin

e Sl

ider

Insert alignment cleats to

the frame. If set includes a

fixed panel, one alignment

cleat is required per corner

and should be fitted in

25mm rebate.

Join jamb to

bottom track.

FIG 9

FIG 10

46

Tighten the cleat join

with a 4mm Allen Key

and screws provided.

Check join, remove excess

sealant and repeat process

for second jamb.

FIG 11

FIG 12

Installation Guide

47

Inlin

e Sl

ider

4. If applicable, connect the fixed interlocker (only applicable for sets with fixed panels)

Installation Guide — Origin Inline Slider

1

Stage 4: If applicable, connect the Fixed Interlocker (Only applicable for sets with fixed panel)

Figure 13: Align fixed interlocker to notch on bottom track. Ensure profile position is as per sections above.

Note: Flush Fixed Interlockers do not require End Plates. For instructions, please see Page “9”. Note: Flush fixed interlockers do not require end plates.

48


1


Figure 13: Align fixed interlocker to notch on bottom track. Ensure profile position is as per sections above.

Note: Flush Fixed Interlockers do not require End Plates. For instructions, please see Page “9”.

Align fixed interlocker to notch on bottom track. Ensure profile position is as per sections above.

FIG 13

Installation Guide

49

Inlin

e Sl

ider


2


Figure 14: Seal holes with a suitable sealant.

Figure 15: Fix interlocker end plate with 3.9 x 16mm Screws. Repeat process at both ends of profile.


2



Figure 15: Fix interlocker end plate with 3.9 x 16mm Screws. Repeat process at both ends of profile.

Seal holes with a

suitable sealant.

Fix interlocker end plate

with 3.9 x 16mm screws.

Repeat process at both

ends of profile.

FIG 14

FIG 15

50


3


Figure 16: Align flush fixed interlocker to notch on bottom track. Ensure profile position is as per sections above.



3


Figure 16: Align flush fixed interlocker to notch on bottom track. Ensure profile position is as per sections above.


Align flush fixed interlocker

to notch on bottom track.

Ensure profile position is as

per sections above.

Seal holes with a

suitable sealant.

FIG 16

FIG 17

Installation Guide

51

Inlin

e Sl

ider


4


Figure 18: Fix interlocker in place with 3.9 x 16mm Screws. Repeat process at both ends of profile.

Fix interlocker in place

with 3.9 x 16mm screws.

Repeat process at both

ends of profile.

FIG 18

52


5

Installation Guide

53

Inlin

e Sl

ider

5. Lift the frame into the aperture

Lift frame into the

aperture, ensuring

drainage caps are

situated externally.

Insert packers above

both jambs.

FIG 20

FIG 21

54

6. Fix the bottom track

Where possible, fixing

points should be on both

sides of the frame, in a

zig-zag pattern.

Use an HSS bit to drill and countersink an

appropriate sized fixing hole through the frame.

This should be no more than 150mm from the

external corner of the frame.

Insert suitable sealant to fixing hole, then screw

preferred fixing in place. Repeat process along

the bottom track, ensuring fixings are within

900mm intervals.

FIG 22

FIG 23 FIG 24

Installation Guide

55

Inlin

e Sl

ider

7. Level and fix both jambs

Level out

jambs in both

directions.

FIG 25

FIG 26

Pack out jambs accordingly

when level.

56

Use an HSS bit to drill and

countersink an appropriate

sized fixing hole through the

frame. This should be no

more than 150mm from the

external corner of the frame.

Screw preferred fixing in

place. Repeat process along

the jambs, ensuring fixings are

within 600mm intervals.

FIG 27

FIG 28

Installation Guide

57

Inlin

e Sl

ider

8. Fix the top track

Use an HSS bit to drill and countersink an appropriate sized fixing hole through the frame. This should be no

more than 150mm from the external corner of the frame.

FIG 29

58

Insert suitable sealant to

fixing hole, then screw

preferred fixing in place. This

must be done at both ends

of the top track.

Accurately measure the

internal frame dimensions.

FIG 30

FIG 31

Installation Guide

59

Inlin

e Sl

ider

Pack out across the top track

for consistent internal frame

sizes. Ensure the track doesn’t

bow in any direction.

Use an HSS bit to drill and

countersink an appropriate

sized fixing hole through the

frame. Insert sealant to fixing

hole, then screw preferred

fixing in place. Repeat

process along the top track,

ensuring fixings are within

900mm intervals.

FIG 32

FIG 33

60

Measure diagonally from

corner to corner to check

the frame is square.

Seal the drainage isolator in

place, ensuring ends of profile

are sealed with edge of frame.

FIG 34

FIG 35

Installation Guide

61

Inlin

e Sl

ider

Insert all running gear profiles

into necessary track channels.

Install sashes, working from inside to outside.

Level the running gear profiles

by adjusting the roller height

with a 3mm Allen Key.

FIG 36

FIG 37

9. Install the sash

62

Insert top of sash into top

track channel.

Swing bottom of sash above

running gear.

FIG 38

FIG 39

Installation Guide

63

Inlin

e Sl

ider

Drop sash on to running gear,

ensuring the running gear sits

within the bottom of the sash.

Check to ensure bottom

of sash and running gear

components are flush at

both ends.

FIG 40

FIG 41

64

If applicable, repeat process

for remaining sashes.

FIG 42

Installation Guide

65

Inlin

e Sl

ider

Fix anti-lift blocks above each

sash corner when the sash

is in the closed position. Fix

using 3.9 x 25mm screws and

position no more than 60mm

from the external corner of

the sash.

Level the lockstile to ensure

the sash is parallel to the

frame. Repeat for all opening

sashes to ensure the

interlockers line up correctly.

FIG 43

FIG 44

66

Align centre keeps with

corresponding locking points

(situated directly above and

below handle).

Working from bottom to

top, adjust keep positions

if necessary. Keeps can be

packed out using the 0.5mm

and 2mm packers supplied.

Adjust keeps until the

handle engages correctly,

and the key in the lock

cylinder turns smoothly.

FIG 45

FIG 46

Installation Guide

67

Inlin

e Sl

ider

If more adjustment is required,

use a 3mm Allen Key to adjust

the locking point.

FIG 47

68

10. If applicable, install the fixed panel

Pack out as appropriate.

Apply supplied structural

sealant around each packer.

FIG 48

FIG 49

Installation Guide

69

Inlin

e Sl

ider

Place 10mm anti-lift packers

into track channel.

Insert glass into frame and

slide over on to pre-applied

structural sealant in interlocker.

Pack out below glass, so it is

central in the frame.

FIG 50

FIG 51

70

Use a straight edge or

long level along the fixed

interlocker to ensure

straightness. Pack out

accordingly between edge of

glass and jamb.

Secure frame bead in place.

First clip top and bottom of

bead, then proceed to clip in

the centre.

FIG 52

FIG 53

Installation Guide

71

Inlin

e Sl

ider

Fit wedge gasket between

glass and outer frame, on both

inside and outside glass faces.

Apply bead of structural

sealant along the length of

interlocker (both inside and

outside faces). Leave to fully

cure before operating the set.

FIG 54

FIG 55

72

11. Install frame covers

Clip in the vertical frame

cover pieces.

Clip in the horizontal frame

cover pieces.

FIG 56

FIG 57

Installation Guide

OFDL_18.3.5

Contact

Accounts

t 08448 802 371 or 01494 416 895 e [email protected]

Marketing


Sales Operations


e [email protected]

Solutions


Fleet and Logistics


FS 584084

Origin Global HQ, Stuart House, Castle Estate, Coronation Road, High WycombeBuckinghamshire, HP12 3TA

t 0808 168 5816 e [email protected] www.origin-global.com

Origin Northern Centre of Excellence,Taurus Park, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7ZT

t 01925 907 907e [email protected] w www.origin-global.com

Inline Slider Specification File - Originbs 8888:2013 iso 8015:2011 tolerancing this information and...

Documents

Transcript of Inline Slider Specification File - Originbs 8888:2013 iso 8015:2011 tolerancing this information and...