INJECTION - Saraç Plastiksarac.com/yenipdf/Ts-2019-ENG.pdf• 5 Points vertical double toggle clamp...
Transcript of INJECTION - Saraç Plastiksarac.com/yenipdf/Ts-2019-ENG.pdf• 5 Points vertical double toggle clamp...
INJECTIONMOULDING MACHINES
www.sarac.com ENG
N e w G e n e r a t i o n
T e c h n o l o g y
SRC-TSNew Generation - Energy Efficient
Injection Moulding Machines(300-21,000 kN)
INJECTIONMOULDING MACHINES
www.sarac.com
50 YEARSOF EXPERIENCE
For more than 50 years, Sarac Plastic Technologies have supplied highly re-liable plastic processing machines worldwide with dependable service and competitive prices. Many years of experience in the plastics industry has enabled us to have a comprehensive understanding of markets, processes, technologies and customer-specific requirements. Our customer satisfaction has earned Sarac a reputation as one of the world's leading suppliers in the plastic machinery industry. With our factory stretching to an area of 5.000 m2 and a dedicated team of highly qualified 30 engineers and technicians Sarac can provide effective solutions for its customers requirements.
SARAC manufactures a wide range of new generation ServoTech injection moulding machines built to European standards utilising proven high-quality European brand components. We provide servo energy saving hydraulic injec-tion moulding machines with high speed and two-platen options. Machines can also be built to specific to customers requirements our moulding machines are exported worldwide, with a comprehensive network of sales and service agents to look after all your after sales needs.
Throughout the past half century, and into the next, this commitment to cus-tomer satisfaction will continue to be the foundation for our success.
www.sarac.com
N e w G e n e r a t i o n
T e c h n o l o g y
SRC-TS
Noise Reduction - Quiet gear pump & variable speed operations when required.
Clampingforce sensor(Switzerland)
High-performanceSERVOTECH drive technologyKEB driver (Germany)ECKERLE servo pump (Germany)
Reduced Heat Generation - Only delivers hydraulic oil when it is needed.
BOSCH - REXROTH Hydraulic System
Reduced Energy Consumption up to 30-50%
Proven high quality European brand components
KEBA controller (Austria)
02 / 03SARAC Catalogue
ENERGY SAVING TECHNOLOGYStrong, Reliable, Fast, Quiet, Precise, User Friendly
INJECTIONMOULDING MACHINES
New Generation - Energy EfficientInjection Moulding Machines(300-21,000 kN)
04 / 05SARAC Cataloguewww.sarac.com
QUALITY IS OUR SIGN ON EVERY MACHINE
WE SUPPLY...
GENERAL SPECIFICATIONS
• Double cylinder balanced injection system• Twin cylinder injection unit control• 6 Stage injection pressure and speed control• 5 Stage injection hold pressure control• 5 Stage pressure, speed and time control for plasticizing• Injection cushioning position monitoring function• High L/D ratio screw design• Linear transducer for accurate injection position control• Cold start protection• Purge cover (with safety switch)• Automatic purge function• High torque motor for screw plasticization• Suck back function• Mechanical support for injection barrel (>570 Ton)• Wide choice of injection units with A-B-C screw/barrel• Bimetal screw• Pre-suck back function• Ceramic heater bands• SSR temperature control• Stand by (keep warm) control• Weekly pre heating scheduling• Auto-start barrel heating function• Nozzle centering alignment function
INJECTION UNIT
• KEBA controller unit (Austria)• KEB driver (Germany)• Dynamic monitor of actual machine operation• Unlimited mould data memory• Precise errors indication and alarm function• NOVOTECHNIK transducer (Germany)• Multi languages: English, German, Turkish, Spanish,
Portuguese, French, Arabic, Russian.• Barrel temperature monitoring function• Automatic purge function• Unattended running operation lock switch• SSR temperature control• PID temperature control• I/O testing function• USB port data connecting• Emergency stop safeguard device• Screw speed detection device• 3 Color alarm light with sound• Voltage regulator• Presentation of production and quality control• Photo sensor• Euromap standards• Robot interface Euromap 67
ELECTRONICS
• T slot mould platen• 5 Points vertical double toggle clamp mechanism• Quick automatic mould height & clamping force setting on screen• Mould height adjustment with hydraulic motor• Precise, low pressure and fast mould adjustment• Mechanical, hydromechanical, electric safety system• 4 Stage mould open/close pressure & speed control• Precise mold protection function• Automatic door (>800T)• Intensified wear-resistant supporting tracks for movable platen• Mould cooling water flow regulator• 2-4 pcs core valves• 2 pcs air valves• Multi stage, multi function hydraulic ejection control• Automatic central lubrication system• High speed mould closing function• Linear transducer for accurate clamp position control
CLAMPING UNIT
HYDRAULICS
• BOSCH - REXROTH, VICKERS Hydraulic components• Core in/out, pressure, speed, and position settings• ECKERLE servo pump (Germany)• Pressure transmitter• Oil temperature upper and lower limit alarm• Oil temperature temperature alarm• Pressure and flow proportional control• Oil tank air filter• Oil tank level indicator• System pressure gauge• Injection & back pressure gauge• By pass oil filter
SRC SERIESINJECTION MOULDING MACHINES
GENERAL SPECIFICATIONS
06 / 07SARAC Cataloguewww.sarac.com
INJECTIONMOULDING MACHINES
SPARE PARTS• 1 pcs screw tip, ring set• 1 Set various O-rings • 1 pcs extended Nozzle • 1 pcs heater band • 1 pcs nozzle key • 1 pcs ceramic heater band • 1 pcs lubrication oil• Professional tools• Manual for machine and PLC system• Set of 8 mold clamps for T-Slot or thread
• Variable pump• Ejector movement function at mold opening• Parallel movement control• Accumulator for fast injection• Sequential valve gate controller• Hydraulic or pneumatic shut of nozzle• Mould cooling water flow regulator• Oil pre-heating function• Heater Insulation Jacket for Injection Unit• Proportional valve for mold open/close control• Core/ejection parallel with mould• Clamping unit/injection unit combinations for
specific applications• Special screw designs for PVC, PET, PC production• Mould temperature control• Heat insulation plates• Material dehumidifier• Hopper dryer• Hopper loader
AVALIABLE OPTIONSSTANDARD PARTS
• KEBA controller unit (Austria)• KEB driver (Germany)• ECKERLE or SUMITOMO pump (Servo) (Germany /
Japan)• Clamping force sensor (Switzerland)• BOSCH - REXROTH, VICKERS Hydraulic valves
(Germany / U.S.A)• NOVOTECHNIK Transducer (Germany)• FESTO Pneumatic System (Germany)• SCHNEIDER Electric components (France)• CALZONI Hydraulic Motor (>650T) (Italy)• INTERMOT Hydraulic Motor (Italy)• YUKEN Proportional valve (Japan)• Robot Interface Euromap 67• I/O Testing function• SSR temperature control• 2 -4 Pcs core valves • 2 Pcs air valves• Water regulator• Pressure transducer for injection• Ceramic heater bands• T-Slot mould platen• Suck back function• Suck back proportional• Solenoid valve for oil cooling
• Automatic purge function• Double-cylinder balanced injection system• 6 Stage injection pressure/ speed control• 5 Stage injection hold pressure control• 5 Stage pressure, speed and time control for plasticizing• Injection cushion monitoring function• Fast mould closing function• Automatic mold adjustment• Unlimited mould data memory• High precision mould protection function• Multi ejector system• Central lubrication level and pressure switches• Oil high and low temperature alarm• Oil level switch• By pass oil filter• Photo sensor• Phase sequences and phase protection relay• Door safety relay• Mechanical, hydromechanical and electric safety system• Voltage regulator• USB port data connecting• Adjustable machine leveling pads• Customized color
08 / 09SARAC Cataloguewww.sarac.com
ENERGY SAVINGINJECTION MOULDING MACHINES
ADVANTAGES OFSERVOTECH TECHNOLOGY
In an addition to standard injection moulding machines with clamping force ranging between 300 and 21000 kN, we can provide variable pump and servo pump drive injec-tion moulding machines which are optimized with servo energy-saving technology. These machines provide improved efficiency and will save 30% - 50% energy.
SRC Energy saving injection mould-ing machines keep plastic manu-facturers in the lead by offering competitive solutions to packag-ing, automotive and houseware in-dustries. With the proven modular design of the SRC, Sarac engineers can quickly provide effective real-world solutions for any application. Our experts guide you through the process from machine selection and optimization, through part design, to complete process solutions - includ-ing mold, automation and auxiliary equipment.
PRECISION TOLERANCE COMPARISON
The precision of processing tolerances for producing the plastic parts will be greatly improved by using the energy-saving ServoTech, instead of using traditional hydraulic machines equipped with either a fixed or variable pump.
30%-50%ENERGY SAVINGS
Fast cycles
Easy maintenance
CE Certified
Servo energy saving technology
Proven high quality European brand components
ENERGY SAVING TECHNOLOGY QUICK RESPONSE OF
SERVO MOTOR
The response time of the drive system is very fast. It requires only 0.05 sec. to reach the maximum power output. Cycle time is sub-stantially shortened comparing with the plastic parts production by traditional hydraulic injection molding machines. The efficiency is improved significantly.
Quick Response
The drive system requires only 0.05 seconds to reach the maximum power output.
Reduced Energy Consumption
Servo motor rpm adapts according to need from 0 to 3000 rpm.
Reduced Heat Generation
The system only delivers hydraulic oil when it is needed.
Noise Reduction
Quiet gear pump & variable speed operations can be utilised when required.
Reliable Holding Pressure
During holding pressure, servo motor slows down rotation and consumes low energy.
Energy Saving
Between 30% - 50% of energy input is saved.
SERIES
Monitor and store process quality
Quality ViewAnalyze and protocol process quality
Plant ViewOptimizemachine and plant productivity
Production status at a glance
MACHINE DIMENSIONS
10 / 11SARAC Cataloguewww.sarac.com
CLAMPING UNIT SRC 30-TS SRC 40-TS SRC 60-TS SRC 90-TS SRC 130-TS
Clamping Force kN 300 400 600 900 1300Toggle Stroke mm 155 245 270 350 380Space Between Tie Bars (H x V) mm 245 x 195 260 x 260 310 x 310 370 x 370 420 x 420Platen Dimensions (H x V) mm 365 x 315 405 x 405 480 x 470 580 x 560 640 x 640 Max.Mould Height mm 260 300 320 380 450Min.Mould Height mm 80 100 120 150 160Ejector Stroke mm 40 65 70 100 130Ejector Force kN 13 25 22 39.6 39.6
INJECTION UNIT 60 110 160 350 470
A B A B A B C A B C D A B C
Screw Diameter mm 22 25 27 30 26 30 34 32 35 38 42 38 42 45Screw L/D Ratio L/D 17.7 15.5 18.4 16.5 24 21 19 23 21 19.3 17.5 23.2 21 19.6Shot Volume cm3 30 38 55 68 66 88 113 136 163 193 235 227 277 318Shot Weight (PS) g 27 34 50 62 60 80 103 124 148 174 213 206 252 289Shot Weight (PS) oz 0.9 1.2 1.9 2.1 2.1 2.8 3.6 4.4 5.2 6.1 7.5 7.3 8,9 10,2Injection Pressure bar 1850 1430 2070 1680 2450 1840 1430 2630 2190 1860 1520 2080 1710 1480Injection Speed mm/s 120 120 120 120 120 120 120 99 99 99 99 100 100 100Injection Rate (PS) g/s 25 32 50 62 58 77 99 73 87 102 125 104 127 145Plasticizing Capacity (PS) g/s 2.6 3.2 4.3 5.9 7 9.3 11.9 8 10.9 12.8 13.6 10.8 14.5 18Injection Stroke mm 80 90 125 169 199Screw Speed rpm 0 - 165 0 - 200 0 - 220 0 - 220 0 - 200
OTHERS
Max.Pump Pressure bar 140 160 175 160 160Servo Motor Power kW 7.5 11 8.6 18.7 18.7Heater Power kW 2.6 3.2 7.1 8.45 13.1Machine Dimensions (LxWxH) m 2.80 x 0.86 x 1.35 3.1 x 1.10 x 1.4 3.9 x 1.04 x 1.78 4.18 x 1.21 x 1.94 4.52 x 1.28 x 2.45Oil Tank Capacity L 85 95 160 200 250Machine Weight t 1 1.65 2.5 3.6 4.4
SRC-TS SERIES TECHNICAL SPECIFICATIONS
365
245
315
195
70 140
210
70
140
210
280
36-M12
ø 30
405
260
405
260
ø 40
56-M12
70
140
210
280
350
70 140
210
280
350
48042035028021070
350
280
210
70
ø40
32-M16-7H-L35
A-A T-slot
A
A
33
30 18
14
285
32 60 70
SR10
380
450
160
ø3
8-M16-7H
105
140
ø12
5
7014
0
220
32 55 35
SR10
350
380
150
8-M16-7H
ø3
ø10
0
237
32
270320120
SR10
ø3
ø10
0
30
SR10
245 100-300
ø 8
0
10
155 80-260
ø55
24851100
22158003100 1100
1450
3900 1040
3010 995
1465 17
80
4180 1215
3550 1090
1650 19
45
4520 1285
3550 1185
1725 20
45
580490420
60-M16-L35
8-Ø30
Ø80
200100
A
A
1433
A-A T-slot
203213
0
130
490
420
350
280
210
140
560
200
140210280350
76-M16-L35
4-Ø28
Ø80
200
200
640560490420350280210140
1433
A-A T-slot
2032
640
560
490
420
350
280
210
140
PLATEN DIMENSIONS
CLAMPING UNIT SRC 160-TS SRC 230-TS SRC 260-TS SRC 280-TS
Clamping Force kN 1600 2300 2600 2800Toggle Stroke mm 445 490 540 600Space Between Tie Bars (H x V) mm 470 x 470 535 x 535 580 x 580 640 x 640Platen Dimensions (H x V) mm 691 x 691 800 x 800 860 x 860 910 x 910Max.Mould Height mm 520 560 610 650Min.Mould Height mm 180 200 220 220Ejector Stroke mm 140 140 150 150Ejector Force kN 39.6 62 62 70
INJECTION UNIT 550 830 1000 1340
A B C A B C A B C A B C
Screw Diameter mm 40 45 48 45 50 55 50 55 60 55 60 65Screw L/D Ratio L/D 22.5 20 18.8 23.3 21 19.1 22.5 20.5 18.8 21.8 20 18.5Shot Volume cm3 270 342 389 398 491 594 491 594 707 665 791 929Shot Weight (PS) g 243 308 350 362 447 540 442 534 636 605 720 845Shot Weight (PS) oz 8.6 10.9 12.4 12.8 15.8 19.0 15.6 18.8 22.4 21.4 25.4 29.8Injection Pressure bar 2150 1690 1490 2100 1700 1410 2050 1690 1420 2020 1700 1450Injection Speed mm/s 109 109 109 100 100 100 113 113 113 110 110 110Injection Rate (PS) g/s 125 158 179 139 172 208 163 197 234 238 283 332Plasticizing Capacity (PS) g/s 22.8 31.7 35.7 18 23.2 29.3 31.5 41.2 49 37 43 48Injection Stroke mm 215 250 250 280Screw Speed rpm 0 - 200 0 - 200 0 - 180 0 - 205
OTHERS
Max.Pump Pressure bar 160 160 160 160Servo Motor Power kW 18.7 23 29 30Heater Power kW 14 20.9 17.3 24Machine Dimensions (LxWxH) m 4.9 x 1.27 x 2.16 5.5 x 1.36 x 2.40 5.93 x 1.4 x 2.32 6.60 x 1.85 x 2.30Oil Tank Capacity L 300 300 405 400Machine Weight t 4.94 7.3 7.51 11
12 / 13SARAC Cataloguewww.sarac.com
SRC-TS SERIES TECHNICAL SPECIFICATIONS
MACHINE DIMENSIONS
PLATEN DIMENSIONS
32315
180
Ø12
5
SR15
Ø4
520445
140
280
350
420
490
560
140280350
420490560
40-M16-7H-L35
390
390
200
200
Ø80
691
691
AA
30
14
33
18
T -slotA-A
4-30
860700560420400280140
40-M20-L45
ø80
100
200
A-A T-slot
8-ø30A
A
200
400
860
700
560
420
400
280
140
2236
4116
6600 1850
350
14032
600650220
8-M16-7H
140
280
Ø16
0
Ø5
75350
32 60 70
105
170
ø16
0
ø4
SR15
8-M16-7H
490560200
370
32
SR15
ø4
540610220
ø 1
60
4900
1270
4300 1200
176
0 216
0
5480 1480
4750 1310
18
90
23
50
59301400
19
50
23
15
280420560700840910
280
420
560
700
840
910
A-A T-slot
24
41
16
40
Ø100
100
200
400
100
200
400
A
A
12-Ø38
40-M16-L35
A-A T-slot
800700560420280140
100
120
200
800
700
560
420
280
140
20
33
14
32
Ø100
200
280400
4-Ø428-Ø28
14 / 15SARAC Cataloguewww.sarac.com
CLAMPING UNIT SRC 320-TS SRC 380-TS SRC 470-TS SRC 570-TS SRC 650-TS
Clamping Force kN 3200 3800 4700 5700 6500Toggle Stroke mm 640 700 780 850 900Space Between Tie Bars (H x V) mm 685 x 685 726 x 726 820 x 800 840 x 835 900 x 900 Platen Dimensions (H x V) mm 990 x 990 1036 x 1040 1210 x 1180 1240 x 1250 1350 x 1400Max.Mould Height mm 690 760 830 880 900Min.Mould Height mm 250 250 300 350 400Ejector Stroke mm 160 180 200 250 260Ejector Force kN 70 110 120 158 186
INJECTION UNIT 1610 2250 3000 4000 5000
A B C A B C A B C A B C D A B C D
Screw Diameter mm 60 65 70 65 70 75 75 80 84 75 84 90 100 80 90 100 110Screw L/D Ratio L/D 21.7 20 18.6 22.4 20.6 19.2 21.4 20 19 23.6 21.1 19.7 17.7 24.8 22 19.8 18Shot Volume cm3 735 862 1000 1094 1269 1457 1722 1959 2160 1987 2492 2861 3532 2261 2861 3533 4274Shot Weight (PS) g 661 776 900 985 1142 1311 1550 1763 1944 1788 2242 2575 3179 2035 2575 3179 3847Shot Weight (PS) oz 23.3 27.3 31.7 34.7 40.3 46.3 54.7 62.2 68.6 63.1 79.1 90.8 112.1 71.8 90.8 112.1 135.7Injection Pressure bar 2190 1870 1610 2080 1800 1560 1770 1560 1410 2050 1630 1420 1150 2240 1770 1430 1180Injection Speed mm/s 107 107 107 108 108 108 103 103 103 115 115 115 115 115 115 115 115Injection Rate (PS) g/s 221 260 301 278 322 370 386 439 484 362 454 521 643 435 550 679 822Plasticizing Capacity (PS) g/s 45.5 55.8 60.3 57.5 64.3 69.5 59.8 68 79.8 56.3 77.9 89.4 110.4 56.7 71.8 88.6 101.9Injection Stroke mm 260 330 390 450 450Screw Speed rpm 0 - 180 0 - 180 0 - 160 0 - 110 0 - 110
OTHERS
Max.Pump Pressure bar 160 160 160 160 160Servo Motor Power kW 39.4 39.4 23 + 29 29 + 29 29 + 39.4Heater Power kW 24.2 26 32.5 36.9 50.9Machine Dimensions (LxWxH) m 6.88 x 1.77 x 2.43 7.36 x 1.88 x 2.62 7.92 x 1.97 x 2.69 8.82 x 2.32 x 2.80 9.93 x 2.45 x 2.80Oil Tank Capacity L 600 700 800 1000 1200Machine Weight t 11.66 13.4 16.8 27 32
MACHINE DIMENSIONS
PLATEN DIMENSIONS
SRC-TS SERIES TECHNICAL SPECIFICATIONS
6980
5599
2430
2035
990840700560420400280
32-M20-7H-L45
A-A T-slot
36
41
22
16
12-ø33
100
200
400
ø100
990
840
700
560
420
400
280
100200400
1036840700660560420280
28-M20-7H-L45
ø100
12-ø30
100
200
400
A-A T-slot
1641
100200400
36 22
1040
840
700
660
560
420
280
1210980840726700560420280
36-M20-7H-L50
ø120
4-ø 5312-ø30
100
200400700
100
150
200
400
1180
980
840
726
700
560
420
280
A-A T-slot
1641
36
22
12501120980840700560420280
1250
1120
980
840
700
560
420
280
60-M20-7H-L50
A-A T-slot
ø100
4116
100
150
200
400
36
22
100150200400
4-ø5312-ø33
135011901050910770630490350
60-M24-L48
100
150
200
400
A-A T-slot
5220
46
28
1400
1190
1050
910
770
630
490
350
ø80
4-ø53
12-ø33
100200400700
438
32
SR15
ø4
640690250
ø16
0
451
32
700760250
SR15
ø4
ø16
0
51032
780830300
ø5ø20
0
56432
850920350
ø5
ø20
0
SR15
62940
900900400
ø5
ø20
0
SR15
7360
6120 1876
2130 26
18
8820
78952320
216
52
79
7
1870
9930
9050 2450
24
30
27
97
17606710 1966
2255 26
86
7920
CLAMPING UNIT SRC 800-TS SRC 1100-TS SRC 1300-TS SRC 1600-TS SRC 2100-TS
Clamping Force kN 8000 11000 13000 16000 21000Toggle Stroke mm 1040 1250 1400 1600 1800Space Between Tie Bars (H x V) mm 1000 x 1000 1170 x 1170 1350 x 1280 1500 x 1415 1750 x 1600Platen Dimensions (H x V) mm 1465 x 1480 1680 x 1680 1934 x 1896 2180 x 2180 2480 x 2380Max.Mould Height mm 1030 1250 1400 1500 1700Min.Mould Height mm 400 500 550 700 780Ejector Stroke mm 280 320 350 350 400Ejector Force kN 186 215 215 318 430
INJECTION UNIT 6700 9900 10600 13000 18000
A B C D A B C D A B C D A B C D A B C
Screw Diameter mm 90 100 110 120 100 110 120 130 110 120 130 140 120 130 140 150 140 150 160Screw L/D Ratio L/D 24.5 22 20 18.3 24 21.9 20 18.5 26.2 24.1 22.4 20.9 26.1 24.1 22.4 20.9 22.4 20.9 19.6Shot Volume cm3 2925 3611 4369 5200 4712 5702 6786 7964 5224 6217 7297 8462 6669 7827 9078 10421 11084 12723 14476Shot Weight (PS) g 2632 3250 3932 4680 4288 5189 6175 7247 4702 5595 6567 7616 6002 7045 8170 9379 10086 11578 13174Shot Weight (PS) oz 92.9 114.6 138.7 165.1 151.3 183.0 217.8 255.6 165.8 197.4 231.6 268.6 211.7 248.5 288.2 330.8 355.8 408.4 464.7Injection Pressure bar 2280 1840 1520 1280 2100 1740 1460 1240 2050 1720 1470 1260 1930 1640 1420 1230 1630 1420 1250Injection Speed mm/s 100 100 100 100 91 91 91 91 115 115 115 115 114 114 114 114 114 114 114Injection Rate (PS) g/s 509 629 761 906 650 787 937 1099 726 865 1015 1117 1070 1256 1457 1672 1331 1528 1738Plasticizing Capacity (PS) g/s 71 88 107 127 73.6 93.9 115.6 147 103 122.6 143.9 166.9 123 147.6 171.2 186.7 171.2 186.7 199Injection Stroke mm 460 600 550 590 720Screw Speed rpm 0 - 110 0 - 107 0 - 91 0 - 99 0 - 80
OTHERS
Max.Pump Pressure bar 160 160 160 160 160Servo Motor Power kW 39.4 + 39.4 45 + 45 29 + 39.4 + 39.4 29 + 39.4 + 39.4 + 39.4 39.4 + 39.4 + 39.4 + 39.4Heater Power kW 56.1 68.87 84.95 101.85 114.05Machine Dimensions (LxWxH) m 11.05 x 2.65 x 3.80 11.84 x 2.91 x 3.3 13.2 x 3.1 x 3.6 13.85 x 3.43 x 4.20 16.0 x 3.6 x 4.8Oil Tank Capacity L 1500 2000 2400 2800 3000Machine Weight t 40 55 66 105 139
SRC-TS SERIES TECHNICAL SPECIFICATIONS
16 / 17SARAC Cataloguewww.sarac.com
MACHINE DIMENSIONS
PLATEN DIMENSIONS
16801560140012601120980840630420
1560
1400
1260
1120
980
840
630
420
84-M24-7H
ø120
100
150
200
400
700
20-ø48
100150200400700
A-A T-slot
2252
50
28
193416801540140012301050840630420
1896
1680
1400
1120
840
630
420
64-M24-L50
ø120
12-ø5312-ø35
100
150
200
250
400
700
1001502004007001000
A-A T-slot
2052
46
28
A-A T-slot
2566
60
36
2380
1960
1680
1400
1120
840
560
280
48-M30-L60
248022401960168014001120840560280
ø120
20-ø588-ø38
10015025040070010001300
100
150
250
400
700
1000
12-ø35
16-ø55
56-M30-7H-L65
ø120
21801960168014001120840560420280
2180
1960
1680
1400
1120
840
560
420
280
A-A T-slot
2566
60
36
101.6152.4177.8234
406.4711.21016
101.
615
2.4
177.8
406.
471
1.2
1016
690
105 105110
32
320215KN
SR15
12-M24-7H
280
420
1250
1250
500
ø6.5
ø25
0
1465133011901050910770630490350
1480
1380
1190
1050
910
770
630
490
350
ø100
76-M24-7H-L50
8-ø5312-ø33
100150200400700
100
150
200
400
700
A-A T-slot
2052
46
28
59532
SR15
ø25
0
ø5
10401030400
800
50
SR20
14001400550
ø25
0
ø6.5
900
40
SR20
16001500700
ø31
5
ø8
90040
SR20
18001700780
ø31
5
ø8
11050
9000 19852650
2450
3800
11840
1053023102910
2335 32
90
13200
11030 20003100
2850 36
00
13845
12950 24203430
3100 42
00
16000
13590 2820
3600
3400
4800
SRC-HS SERIES TECHNICAL SPECIFICATIONS
18 / 19SARAC Cataloguewww.sarac.com
CLAMPING UNIT SRC 270-HS SRC 330-HS SRC 400-HS SRC 460-HS
Clamping Force kN 2700 3300 4000 4600Toggle Stroke mm 560 620 640 680Space Between Tie Bars (H x V) mm 570 x 560 630 x 630 730 x 730 790 x 790Platen Dimensions (H x V) mm 885 x 890 840 x 980 1150 x 1150 1250 x 1250Max.Mould Height mm 600 700 750 820Min.Mould Height mm 220 240 240 300Ejector Stroke mm 150 150 150 150Ejector Force kN 77 77 77 77
INJECTION UNIT 620 620 1200 1200
A B A B A B A B
Screw Diameter mm 45 50 50 53 53 57 53 57Screw L/D Ratio L/D 25 23 25 23 25 23 25 23Shot Volume cm3 302 337 373 419 596 689 596 689Shot Weight (PS) g 275 339 339 381 542 627 542 627Shot Weight (PS) oz 9.7 11.9 11.9 13.4 19.1 22.1 19.1 22.1Injection Pressure bar 2080 1680 1680 1500 2020 1750 2020 1750Injection Speed mm/s 380 380 392 400Injection Rate (PS) g/s 550 679 679 763 787 910 935 1113Plasticizing Capacity (PS) g/s 25.5 32.1 32.1 37.3 37.6 43.1 37.6 43.1Injection Stroke mm 190 190 270 270Screw Speed rpm 0 - 300 0 - 300 0 - 300 0 - 300
OTHERS
Max.Pump Pressure bar 175 175 175 175Servo Motor Power kW 40 + 27 40 + 27 51 + 40 51 + 51Heater Power kW 18 18 32 45Machine Dimensions (LxWxH) m 6.67 x 1.76 x 2.33 6.88 x 1.77 x 2.43 7.36 x 1.88 x 2.62 8.5 x 2.05 x 2.1Oil Tank Capacity L 450 520 650 660Machine Weight t 13 15.5 20 26
SRC-HS High Speed Series
SRC-HS Series is specifically designed for high-speed moulding of packaging products such as caps, closures, fast food containers, and other thin-wall products. It uses advanced technology to provide the best designs and reliable performance with a short moulding cycle time.
High Speed Series
SRC-HS High SpeedSeries
StandardSeries
SRC Series
SRC-HS 270t
SRC-HS 330t
SRC-HS 400t
SRC-HS 460t
StandardSeries
SeriesSRC-HS High Speed
POWERFULHigh-performance products
with flawless operation+ +
ECONOMICNewly developed,
energy-efficient servo driven structure
EFFICIENTExtremely productive system
for successful packaging solutions
• Thin-walled packaging (IML)
• Caps and closures
• Medical consumables
• High-precision technical parts
HIGH SPEED SERIESINJECTION MOULDING MACHINES
www.sarac.com
Scan Barcode With Your Smart Device
Reach information about SARAC product details and contact information.
www.sarac.comENG
INJECTIONMOULDING MACHINES
QUALITY IS OUR SIGN ON EVERY MACHINEWE SUPPLY...
www.sarac.com
SARAC PLASTIC TECHNOLOGIES
Mecidiye Mah. Agri Cad. No:51
34920 Sultanbeyli - Istanbul / TURKEY
+90 216 419 47 32 (pbx) +90 216 419 06 60
INJECTIONMOULDING MACHINES
www.sarac.com