Information procedure - hzn.hr · National Ref : PR NF S 61-111 Title : Fire fighting hose...
Transcript of Information procedure - hzn.hr · National Ref : PR NF S 61-111 Title : Fire fighting hose...
Information procedure Page 1
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Register issued on : 2016-06-03
A list of subsectors can be found at the end of this document.
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector A : SERVICES
Register issued on : 2016-06-03
Page 3Subsector A01: TOURIST SERVICES
Subsector : A01 Registration Date : 2016-05-27Organization : UNMZ Draft Issue Date : 2016-05-31Country : Czech Republic Latest Date for Comments : 2016-06-30
Project ID : 76000416/0001 Project Established
ICS :National Ref :Title : Tourism services - Classification of accommodation establishments - Category hotel,
hotel garni, pension, motel and boatel (accommodation in cabins of the permanent mooraged passenger ship)
Scope : This standard establishes condition for classification of accommodation establishment (category hotel, hotel garni, pension, motel and boatel). The requirements for classification are in conformity with requirements of other European countries. After the first stage of system functioning in the years 2010-2012, it was necessary to assess possible improvements. Based on this assessment, it was decided to make partial modifications in the classification for category of pension
Relatedness :National : REV/AMD CSN 76 1110(2013) :
** End of Subsector **
Subsector A03: POSTAL SERVICES
Subsector : A03 Registration Date : 2016-05-27Organization : ISSCountry : Serbia Latest Date for Comments : 2016-07-26
Project ID : 00048883/0001 Draft for public enquiry
ICS :National Ref : naSRPS A.L3.001:2016Title : Address system - Model for data exchangeScope : This standard defines the general principles of address system at the national level. Standard
defines the content and structure of the addressing style for the exchange, which ensures that data on the physical address exchange in a unique way. This standard defines the basic rules and procedures for the establishment of harmonized data sets on physical addresses, which provides unambiguous identification of objects and / or part of an object in space. This standard is general and is applicable to all organizations and all stakeholders of the social system of information that the scope of its work provide components address register, keep records of the physical address or data users address system. The standard allows easier exchange of address information between entities.
Relatedness :National : New :
** End of Subsector **
Subsector A06: BUILDING AND CONSTRUCTION SERVICES
Subsector : A06 Registration Date : 2016-05-04Organization : SNV Draft Issue Date : 2016-05-02Country : Switzerland Latest Date for Comments : 2016-06-24
Project ID : CH160005/0001 Draft for public enquiry
Page 4
ICS : 91.010.01National Ref : prSN 506500Title : Building cost classification BCC
Relatedness :National : REV/AMD SN 506 500:2001; SN 506 504:2003 :
** End of Subsector **
Subsector A99: UNDETERMINED
Subsector : A99 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601752/0001 Project Established
ICS : 03.040National Ref : UNI1601752Title : Non regulated professions
Operators working in planning and compliance of companies, associations and bodies of banking, financial and insurance sectors Knowledge, skill and competence requirements
Scope : The standardization activity is aimed at defining, for each professional profile identified, the requirements of the compliance officer, i. e. the knowledges, skills and competences necessary to carry out the profession, which involves the whole company activity.
Relatedness :National : New :
** End of Subsector **
** End of Sector **
Information procedure Page 5
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2016-06-03
Page 6Subsector B01: FIRE PROTECTION
Subsector : B01 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00196022/0001 Project Established
ICS :National Ref : PR NF S 61-111Title : Fire fighting hose assemblies - Assembling requirements for hoses and couplings and
tests
Relatedness :National : New :
Subsector : B01 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00196023/0001 Project Established
ICS :National Ref : PR NF S 61-112Title : Fire-fighting hoses - Flexible delivery hoses of diameters 25 - 45 - 70 - 110 - 152
Relatedness :National : New :
Subsector : B01 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 03101049/0001 Project Established
ICS : 01.080.20National Ref : DIN 14033/A1Title : Symbolic abbreviations for fire brigade; Amendment A1
Relatedness :National : New :
** End of Subsector **
Subsector B02: STRUCTURES
Subsector : B02 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026801/0001 Project Established
ICS : 91.010.30National Ref : ÖNORM B 1600/ATitle : Accessible built environment - Design principlesScope : The provisions of the present Standard shall be applied to new constructions, rebuildings
and annexes intended to provide barrier-free buildings and installations.
Relatedness :
Page 7
National : New :
Subsector : B02 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00195915/0001 Project Established
ICS :National Ref : PR NF DTU 58.1 P1-1Title : Building works - Suspended ceilings - Part 1-1 : Contract bill of technical model clauses
Relatedness :National : New :
Subsector : B02 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00195916/0001 Project Established
ICS :National Ref : PR NF DTU 58.1 P2Title : Building work - Suspended ceilings - Part 2 : Contract bill of special administrative model
clauses
Relatedness :National : New :
Subsector : B02 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00195917/0001 Project Established
ICS :National Ref : PR NF DTU 58.1 P1-2Title : Building works - Suspended ceilings - Part 1-2 : General criteria for selection of materials
Relatedness :National : New :
Subsector : B02 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00196203/0001 Project Established
ICS :National Ref : PR NF P94-261/A1Title : Geotechnical design ¿ Shallow foundations
Relatedness :National : New :
** End of Subsector **
Page 8Subsector B03: CONCRETE
Subsector : B03 Registration Date : 2016-05-02Organization : LVS Draft Issue Date : 2016-05-05Country : Latvia Latest Date for Comments : 2016-07-07
Project ID : 00058718/0001 Project Established
ICS : 91.100.30National Ref : LVS 156-1Title : Concrete - National annex of Latvian standard to European standard EN 206:2013
Concrete - Specification, performance, production and conformityScope : The standard contains national provisions for the concrete specifications, which have to be
considered assessing suitability of the concrete for the construction in climatic conditions of Latvia. The provisions of the standard are based on the provisions of the European Standards for concrete as well as constituent materials and it shall be used together with those standards. This standard is only operable together with LVS EN 206 . This standard contains test methods for determination of the freeze/thaw resistance. The standard contains provisions for the conformity assessment of the concrete in Latvia.
Relatedness :National : REV/AMD LVS 156-1 :
Subsector : B03 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 00517707/0001 Project Established
ICS :National Ref : 00517707Title : Sealing of joints in concrete with waterstops
Relatedness :National : New :
Subsector : B03 Registration Date : 2016-05-30Organization : PKNCountry : Poland
Project ID : 27401119/0001 Project Established
ICS : 91.100.30National Ref : prPN-B-06265PTitle : Concrete - National Annex to PN-EN 206:2014-04Scope : This document sets out additional requirements for the constituent materials of concrete:
cement, aggregate, water and additives. It also specifies the additional requirements and tests for hardened concrete - ordinary freeze/thaw resistance, freeze/thaw resistance in the presence of de-icing salts, resistance to penetration of water under pressure. Additional concrete consistency classes and exposure classes for risk of abrasion were also specified
Relatedness :National : New :
** End of Subsector **
Subsector B05: FIRE TESTS
Page 9
Subsector : B05 Registration Date : 2016-05-09Organization : NENCountry : Netherlands
Project ID : 50001963/0001 Project Established
ICS : 29.240.01, 91.140.50National Ref : NTA 8220:2016 Concept nlTitle : Periodical fire risk assessment of low voltage electrical installations and work equipment Scope : Periodical fire risk assessment of low voltage electrical installations and work equipment
Relatedness :National : New :
** End of Subsector **
Subsector B06: GYPSUM
Subsector : B06 Registration Date : 2016-05-25Organization : BDSCountry : Bulgaria Latest Date for Comments : 2016-07-15
Project ID : BG004003/0001 Draft for public enquiry
ICS : 91.100.10National Ref :Title : Gypsum rocks for manufacture of gypsum binders and cement – Specifications and test
methodsScope : The standard refers to the characteristics, requirements and classification of gypsum rocks
represented mainly by gypsum used as raw material in the production of gypsum binders or as an additive in the production of cement and other binders. The standard includes test methods for determining the characteristics of gypsum rocks and terms of delivery.
Relatedness :National : NewInternational : Modified ISO 1587:1975
** End of Subsector **
Subsector B08: DOORS AND WINDOWS
Subsector : B08 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00196123/0001 Project Established
ICS :National Ref : PR NF P26-329Title : Building hardware - Handling and/or closing devices for doors and door height windows
Relatedness :National : New :
** End of Subsector **
Subsector B09: THERMAL MATTERS
Subsector : B09 Registration Date : 2016-05-17Organization : DIN
Page 10
Country : Germany
Project ID : 00517693/0001 Project Established
ICS :National Ref : 00517693Title : Thermal insulation and energy economy in buildings - Part 4: Hygrothermal design values
Relatedness :National : New :
** End of Subsector **
Subsector B14: GEOTECHNICS
Subsector : B14 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 00517716/0001 Project Established
ICS :National Ref : 00517716Title : Subsoil - Calculation of earth-pressure
Relatedness :National : New :
** End of Subsector **
Subsector B15: SANITARY APPLIANCES
Subsector : B15 Registration Date : 2016-05-30Organization : SNV Draft Issue Date : 2016-05-17Country : Switzerland Latest Date for Comments : 2016-08-31
Project ID : CH160006/0001 Draft for public enquiry
ICS : 13.060.30National Ref : prSIA 190Title : Sewerage systems
Relatedness :National : REV/AMD SIA 190:2000 :
Subsector : B15 Registration Date : 2016-05-30Organization : SNV Draft Issue Date : 2016-05-17Country : Switzerland Latest Date for Comments : 2016-08-31
Project ID : CH160007/0001 Draft for public enquiry
ICS : 13.060.30National Ref : prSIA 118/190Title : General conditions for sewerage systems
Relatedness :National : REV/AMD SIA 190:2000 :
** End of Subsector **
Page 11Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY
Subsector : B17 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601781/0001 Project Established
ICS : 17.180.20, 93.080.40National Ref : UNI1601781Title : Light and lighting - Road tunnel lightingScope : The standard specifies the requirements for road tunnel lighting installations in order to
ensure the driver, both in daytime and in night-time, the entry, passing through and exit of the covered stretch at the maximum allowed speed, with safety degrees not lower than those of the pertinent road and in adequate visual comfort conditions.
Relatedness :National : REV/AMD UNI 11095:2011 :
Subsector : B17 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 05800816/0001 Project Established
ICS : 17.180.20National Ref : DIN 5032-7Title : Photometry - Part 7: Classification of illuminance meters and luminance meters
Relatedness :National : New :
Subsector : B17 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 05800817/0001 Project Established
ICS : 17.180.20National Ref : DIN 5032-8Title : Photometry - Part 8: Data-sheet for illuminance meters
Relatedness :National : New :
Subsector : B17 Registration Date : 2016-05-09Organization : NENCountry : Netherlands
Project ID : 50001965/0001 Project Established
ICS : 93.080.40National Ref : NPR 13201:2016 nlTitle : Public lighting - Part 1: Quality criteriaScope : In this NPR 13201 classifications for public lightning are defined in relation to the visual
needs of road users. The classifications are linked with technical aspects of road use and traffic behaviour in different traffic situations. Also esthetical aspects, visual comfort and
Page 12
environmental aspects are treated in a separate chapter.
Relatedness :National : New :
** End of Subsector **
Subsector B20: DRAINAGE EQUIPMENT
Subsector : B20 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026794/0001 Project Established
ICS : 13.060.30, 93.030National Ref : ÖNORM B 5016Title : Earthworks for water and sewage pipelines for community systems and industry - Quality
assurance of compaction worksScope : This standard is applicable for the quality assurance of compaction works during earthworks
for pipes in pipe trenches and dams and in a soil replacement (according to ÖNORM B 2503 and ÖNORM B 2538 and ÖNORM EN 805, ÖNORM EN 1610 and ONR CEN / TR 1046). In particular the standard applies to the quality assurance of the compaction in the embedment.
Relatedness :National : New :
** End of Subsector **
Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT
Subsector : B25 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601648/0001 Project Established
ICS : 91.060.40National Ref : UNI1601648Title : Gas plants for civil use fed by network distribution
Systems for evacuation of combustion products, connected to gas appliances Evaluation criteria, renewal and renovation.
Scope : This standard defines criteria for functionality evaluation of gas plants for civil use fed by network distribution, connnected to gas appliances. This standard specifies criteria for renewal and renovation of existing systems for evacuation of combustion products.
Relatedness :National : REV/AMD UNI 10845:2000 :
Subsector : B25 Registration Date : 2016-05-09Organization : NENCountry : Netherlands
Project ID : 50001964/0001 Project Established
ICS : 23.040.20, 75.200,
Page 13
91.140.40National Ref : NEN 7244-2:2016 Concept nlTitle : Gas supply systems - Pipelines for maximum operating pressure up to and including 16
bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
Scope : Describes the specific functional recommendations for polyethylene (PE) pipelines in addition to the general functional recommendations of EN 12007-1 focussed on the Dutch situation.
Relatedness :National : New :
** End of Subsector **
Subsector B26: ROAD BUILDING AND MAINTENANCE
Subsector : B26 Registration Date : 2016-05-19Organization : UNMSCountry : Slovakia
Project ID : 73602116/0001 Project Established
ICS : 19.060National Ref :Title : Evaluation of skid resistance of pavement surfaceScope : This revision of national standard specifies the requirements for skid resistance parameters
of pavements surface (asphalt concrete and cement concrete) in connection with the European standards series EN 13036 introduced into the system of Slovak technical standards, as well as applicable national law. This standard supersedes the national standard STN 73 6195: 1974 and amendment STN 73 6195/Z1: 2006.
Relatedness :National : REV/AMD STN 75 6195 :
** End of Subsector **
Subsector B27: WATERPROOFING MATERIALS
Subsector : B27 Registration Date : 2016-05-12Organization : UNMZ Draft Issue Date : 2016-05-30Country : Czech Republic Latest Date for Comments : 2016-06-30
Project ID : 73007913/0001 Draft for public enquiry
ICS :National Ref :Title : Designing of roofs - Basic provisionsScope : This standard specifies the technical requirements and design principles for roof.
Relatedness :National : REV/AMD ČSN 73 1901 :
** End of Subsector **
Subsector B28: FLOOR COVERINGS
Subsector : B28 Registration Date : 2016-05-02Organization : AFNOR
Page 14
Country : France
Project ID : 00195918/0001 Project Established
ICS :National Ref : PR NF DTU 54.1 P1-1Title : Building works - Cast in situ synthetic resin flooring - Part 1-1 : Contract bill of technical
model clauses
Relatedness :National : New :
** End of Subsector **
Subsector B29: AGGREGATES
Subsector : B29 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00196052/0001 Project Established
ICS :National Ref : PR NF X46-020Title : Asbestos survey - Survey of materials and products containing asbestos in buildings -
Mission and methodology
Relatedness :National : New :
** End of Subsector **
Subsector B32: PRECAST CONCRETE PRODUCTS
Subsector : B32 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026802/0001 Project Established
ICS : 91.090, 91.100.30National Ref : ÖNORM B 3260Title : Precast concrete products - Precast concrete garages - Requirements for monolithic
reinforced concrete garages or reinforced concrete garages composed of room elements - National specifications to ÖNORM EN 13978-1
Scope : The following ÖNORM has to be applied together with ÖNORM EN 13978-1 for precats concrete garages. For the CE-Marking the rules accordung ÖNORM EN 13978-1:2005, annex ZA are applicable. The provisions of this ÖNORM will be used together with the requirements of EN 13978-1 ÖNORM for testing and tendering.
Relatedness :National : New :
** End of Subsector **
Subsector B99: UNDETERMINED
Subsector : B99 Registration Date : 2016-05-17Organization : DINCountry : Germany
Page 15
Project ID : 00517726/0001 Project Established
ICS :National Ref : 00517726Title : Waterproofing for indoor applications - Part 5: Waterproofing with waterproofing materials
in panel-shaped form in conjunction with tiles and paving
Relatedness :National : New :
Subsector : B99 Registration Date : 2016-05-03Organization : BSICountry : United Kingdom
Project ID : 01601174/0001 Project Established
ICS :National Ref : BS 1722-14Title : Fences. Part 14: Specification for open mesh steel panel
Relatedness :National : New :
Subsector : B99 Registration Date : 2016-05-30Organization : SNCountry : Norway
Project ID : NOT16005/0001 Draft for public enquiry
ICS : 13.220.20National Ref : prNS 3961Title : Voice alarm systems – Design, installation, commissioning, operation and maintenanceScope : Design, installation, commissioning, operation and maintenance of voice alarm systems
Relatedness :National : New :
** End of Subsector **
** End of Sector **
Information procedure Page 16
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2016-06-03
Page 17Subsector C01: Food products
Subsector : C01 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00195945/0001 Project Established
ICS :National Ref : PR NF V29-001Title : Soya derivatives. Soya juice and soya juice based products
Relatedness :National : New :
Subsector : C01 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601753/0001 Project Established
ICS : 67.060National Ref : UNI1601753Title : Rice – Determination of vitreous and non vitreous kernels (with pearl)Scope : This standard specifies a method for the determination of vitreous kernels. The method is
applicable to non-parboiled milled rice. The Annex also contains a criteria for the classification of non-vitreous kernels, assessing the type of pearl present in them.
Relatedness :National : New :
Subsector : C01 Registration Date : 2016-05-02Organization : MSZTCountry : Hungary
Project ID : 60301601/0001 Project Established
ICS : 67.040, 67.040National Ref : MSZ 6950-3Title : Mircoscopical examination of honey
Relatedness :National : REV/AMD MSZ 6950-3:1977 :
Subsector : C01 (Secondary Subsector)
Registration Date : 2016-05-02
Organization : MSZTCountry : Hungary
Project ID : 60301601/0001 Project Established
ICS : 67.040, 67.040National Ref : MSZ 6950-3Title : Mircoscopical examination of honey
Page 18
Relatedness :National : REV/AMD MSZ 6950-3:1977 :
Subsector : C01 Registration Date : 2016-05-02Organization : MSZTCountry : Hungary
Project ID : 61201601/0001 Project Established
ICS : 67.240, 67.240National Ref : MSZ 9681-2Title : Sensory analysis of ground paprika
Relatedness :National : REV/AMD MSZ 9681-2:1984 :
Subsector : C01 (Secondary Subsector)
Registration Date : 2016-05-02
Organization : MSZTCountry : Hungary
Project ID : 61201601/0001 Project Established
ICS : 67.240, 67.240National Ref : MSZ 9681-2Title : Sensory analysis of ground paprika
Relatedness :National : REV/AMD MSZ 9681-2:1984 :
Subsector : C01 Registration Date : 2016-05-02Organization : MSZTCountry : Hungary
Project ID : 61201602/0001 Project Established
ICS : 67.240, 67.240National Ref : MSZ 157Title : Sensory analysis of honey
Relatedness :National : REV/AMD MSZ 157:1982 :
Subsector : C01 (Secondary Subsector)
Registration Date : 2016-05-02
Organization : MSZTCountry : Hungary
Project ID : 61201602/0001 Project Established
ICS : 67.240, 67.240National Ref : MSZ 157Title : Sensory analysis of honey
Relatedness :
Page 19
National : REV/AMD MSZ 157:1982 :
Subsector : C01 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0045735/0001 Draft for public enquiry
ICS :National Ref : PNE 195006Title : Responsible fishing tunaScope : This standard establishes the requirements for freezer tuna seiner vessels, whether Spanish
or foreing flag, in tuna responsable fishing.
Relatedness :National : New :
Subsector : C01 (Secondary Subsector)
Registration Date : 2016-05-10
Organization : TSECountry : Turkey
Project ID : t0109668/0001 Project Established
ICS : 55.040, 67.240National Ref :Title : Sensory analysis – Testing of packaging materials and packages for food productsScope : This standard specifies a sensory analysis method for packaging materials and packages for
food products to assess their compatibility with food products.
Relatedness :National : NewEuropean : Identical to DIN 10955:2004
** End of Subsector **
Subsector C02: PAINTS AND RELATED PRODUCTS
Subsector : C02 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0045713/0001 Draft for public enquiry
ICS :National Ref : PNE 48295Title : Paints and varnishes. Micaceous-oxide undercoat epoxy paint.Scope : This standard describes a top coating to protect structural steel.
Relatedness :National : REV/AMD UNE 48295:2003 :
Subsector : C02 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Page 20
Project ID : P0045715/0001 Draft for public enquiry
ICS :National Ref : PNE 48278Title : Paints and varnishes. Tar free high built-epoxy coating.Scope : It describes a coating for protection of structural steel and concrete.
Relatedness :National : REV/AMD UNE 48278:2005 :
Subsector : C02 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0045716/0001 Draft for public enquiry
ICS :National Ref : PNE 48277Title : Paints and varnishes. Zinc rich epoxy primer.Scope : It describes a zinc rich epoxy primer for protection of structural steel.
Relatedness :National : REV/AMD UNE 48277:2005 :
Subsector : C02 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0045717/0001 Draft for public enquiry
ICS :National Ref : PNE 48272Title : Paints and varnishes. Repaintable undercoat epoxy paint.Scope : It describes the requirements of a coating suitable as an undercoat to protect steel.
Relatedness :National : REV/AMD UNE 48272:2003 :
** End of Subsector **
Subsector C03: CHEMISTRY
Subsector : C03 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0044992/0001 Draft for public enquiry
ICS :National Ref : PNE 84097Title : Cosmetic raw materials. Sodium alkyl ether sulfate 70%.Scope : This standard includes the specifications required by the sodium alkyl ether sulfate 70% in
cosmetics uses.
Relatedness :National : REV/AMD UNE 84097:2007 :
Page 21
Subsector : C03 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0044993/0001 Draft for public enquiry
ICS :National Ref : PNE 84096Title : Cosmetic raw materials. Sodium alkyl ether sulfate 27%.Scope : This standard includes the specifications required by the sodium alkyl ether sulphate 27% in
cosmetics uses.
Relatedness :National : REV/AMD UNE 84096:2007 :
Subsector : C03 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0044997/0001 Draft for public enquiry
ICS :National Ref : PNE 84137Title : Cosmetic raw materials. Coconut monoethanolamide.Scope : This standard includes the specifications required by the Coconut monoethanolamide in
cosmetics uses.
Relatedness :National : REV/AMD UNE 84137:2008 :
Subsector : C03 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0045462/0001 Draft for public enquiry
ICS :National Ref : PNE 84076Title : Cosmetic raw materials. Ethanol. Quantification of mixtures of synthetized and fermented
ethyl alcohol. Radiometric method.Scope : This standard includes the specifications required by the Ethanol, the quantification of
mixtures of synthetized and fermented ethyl alcohol by the radiometric method.
Relatedness :National : REV/AMD UNE 84076:1992 :
Subsector : C03 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0045765/0002 Draft for public enquiry
ICS :National Ref : PNE 84070Title : Cosmetic raw materials. Ethyl alcoholScope : This standard sets the general characteristics and specifies the assay methods corresponding
to ethanol used as a raw material in cosmetic formulations. This standard is applicable to
Page 22
ethanol without any kind of denaturant.
Relatedness :National : REV/AMD UNE 84070:1992 :
** End of Subsector **
Subsector C06: ESSENTIAL OILS
Subsector : C06 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0044988/0001 Draft for public enquiry
ICS :National Ref : PNE 84006Title : Cosmetic raw materials. Glyceryl stearate.Scope : This standard includes the specifications required by the Glyceryl stearate in cosmetics uses.
Relatedness :National : REV/AMD UNE 84006:2003 :
** End of Subsector **
Subsector C18: ADHESIVES
Subsector : C18 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601751/0001 Project Established
ICS : 83.180National Ref : UNI1601751Title : Adhesives
Determination of water-soluble chromates in cement-based adhesives by ion chromatography
Scope : The standard specifies a method to determine water-soluble hexavalent chromium [Cr(VI)] by ion chromatography between 0,01 mg/kg (ppm) and 20 mg/kg (ppm)
Relatedness :National : REV/AMD UNI 11227:2008 :
** End of Subsector **
Subsector C21: COSMETICS
Subsector : C21 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0044589/0002 Draft for public enquiry
ICS :National Ref : PNE 84762Title : Cosmetic raw materials. Plant extracts. Determination of triterpene derivatives by HPLCScope : The purpose of this standard is to describe the analytical procedure available for
identification of triterpens by HPLC.
Page 23
Relatedness :National : REV/AMD UNE 84762:2009 :
** End of Subsector **
Subsector C99: UNDETERMINED
Subsector : C99 Registration Date : 2016-05-20Organization : EVSCountry : Estonia
Project ID : 00090875/0001 Project Established
ICS : 67.060National Ref : prEVS 727Title : Cereal products - Determination of metallomagnetic admixtureScope : This Estonian standard specifies a methods for the determination of magnetic metal
admixture in cereal products (flour, groats and brans).
Relatedness :National : New :
Subsector : C99 Registration Date : 2016-05-20Organization : EVSCountry : Estonia
Project ID : 00090876/0001 Project Established
ICS : 67.060National Ref : prEVS 730Title : Cereal products - Determination of particle size, admixture content and sound kernels in
croatsScope : This Estonian standard specifies a method for the determination of particle size in flours,
brans, groats (including polished pea) and admixture and sound kernels in groats.
Relatedness :National : New :
** End of Subsector **
** End of Sector **
Information procedure Page 24
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2016-06-03
Page 25Subsector F02: UNITS & SYMBOLS
Subsector : F02 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026795/0001 Project Established
ICS : 01.060, 17.180.01National Ref : ÖNORM A 6437Title : Quantities and units - Light and other optical radiations - Supplementary provisions to
ÖNORM EN ISO 80000-7Scope : This ÖNORM specifies terms, symbols and definitions of quantities and units for light and
other optical radiations and terms of colorimetry determined which are not part of ÖNORM EN ISO 80000-7.
Relatedness :National : New :
** End of Subsector **
Subsector F04: SIEVES
Subsector : F04 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026808/0001 Project Established
ICS : 19.120National Ref : ÖNORM ISO 3310-2Title : Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal
plateScope : This ÖNORM specifies the technical requirements and corresponding test methods for test
sieves of perforated metal plate. It applies to test sieves having round holes, with sizes from 125 mm down to 1 mm, or square holes, with sizes from 125 mm down to 4 mm, in accordance with ISO 565.
Relatedness :National : New :
** End of Subsector **
Subsector F05: MEASURING INSTRUMENTS
Subsector : F05 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601650/0001 Project Established
ICS : 91.140.40National Ref : UNI1601650Title : Gas meters with metering pressure not greater than 0,07 bar – Criteria for metrological
verificationScope : The standard defines:
a) the requirements to carry out metrological verification of the meter in the laboratory and at the end user; b) the technical operational procedure to be applied to carry out metrological verification of the meter at the end customer and the method of calculating the measurement error;
Page 26
c) the characteristics of the measuring equipment necessary to carry out the metrological verification; d) the procedure for removal and transport to the laboratory; e) the requirements of laboratories in which to effect the metrological verification of the meter. It applies to all meters for measuring gas of the second and third family, performing the measurement at a pressure not greater, respectively of 0.04 bar (0.4 kPa) for natural gas, and 0.07 bar (0.7 kPa) for mixtures of LPG.
Relatedness :National : REV/AMD UNI 11003:2013 :
** End of Subsector **
Subsector F12: INFORMATION PROCESSING SYSTEMS
Subsector : F12 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00196116/0001 Project Established
ICS :National Ref : PR NF P99-200/A2Title : Road traffic control - Road traffic lights - Technical specifications - Part R12PPS
Relatedness :National : New :
Subsector : F12 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00196117/0001 Project Established
ICS :National Ref : PR NF P99-050Title : Road traffic control. Traffic signalled juction. Principles of maintenance
Relatedness :National : New :
Subsector : F12 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00196119/0001 Project Established
ICS :National Ref : PR NF P99-060Title : Road traffic control. Traffic signalled junction. Implementation conditions of equipment
Relatedness :National : New :
** End of Subsector **
Page 27Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES
Subsector : F14 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 01700029/0001 Project Established
ICS : 37.100.01National Ref : DIN 16611Title : Printing technology - Measures for screen printing
Relatedness :National : New :
Subsector : F14 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 01700030/0001 Project Established
ICS : 01.040.37National Ref : DIN 16528Title : Printing technology - Terms for gravure printing
Relatedness :National : New :
Subsector : F14 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 01700031/0001 Project Established
ICS : 01.040.37National Ref : DIN 16610Title : Printing technology - Porous printing - Terms for screen printing
Relatedness :National : New :
** End of Subsector **
Subsector F20: QUALITY ASSURANCE
Subsector : F20 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00196120/0001 Project Established
ICS :National Ref : PR NF V01-005Title : Quality management system for agricultural activities - Model for the control of reciprocal
commitments between producers and an organized agricultural production structure
Relatedness :National : New :
Page 28
Subsector : F20 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00196121/0001 Project Established
ICS :National Ref : PR NF V01-007Title : Quality and environmental management system for agricultural activities - Model for the
control of reciprocal commitments between producers and an organized agricultural production structure
Relatedness :National : New :
** End of Subsector **
Subsector F99: UNDETERMINED
Subsector : F99 (Secondary Subsector)
Registration Date : 2016-05-09
Organization : NENCountry : Netherlands
Project ID : 50001963/0001 Project Established
ICS : 29.240.01, 91.140.50National Ref : NTA 8220:2016 Concept nlTitle : Periodical fire risk assessment of low voltage electrical installations and work equipment Scope : Periodical fire risk assessment of low voltage electrical installations and work equipment
Relatedness :National : New :
** End of Subsector **
** End of Sector **
Information procedure Page 29
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2016-06-03
Page 30Subsector H04: SPORTS EQUIPMENT
Subsector : H04 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026810/0001 Project Established
ICS :03.080.30, 03.180, 97.220.10
National Ref : ÖNORM S 1150/ATitle : Requirements for the training of qualified bath supervisorsScope : These Austrian Standard defines requirements for the training of bath personnel. This
ÖNORM contains the training- and exam standards, the teaching areas and contents and the qualification of teachers.
Relatedness :National : New :
Subsector : H04 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601819/0001 Project Established
ICS : 97.220.10National Ref : UNI1601819Title : Swimming pools - Requirements for swimming pool water circulation, filtration,
disinfection and chemical treatmentScope : The standard provides a swimming pool classification and specifies design requirements,
construction and management of water treatment installations. The standard also gives indications regarding tests and inspections to ensure swimming pool water quality suitable for bathing water.
Relatedness :National : REV/AMD UNI 10637:2015 :
** End of Subsector **
Subsector H11: HEATER CONTROLS
Subsector : H11 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 04111887/0001 Project Established
ICS :National Ref : 04111887Title : Statistics on meteorological data for calculating the energy requirement for heating and
air conditioning equipment
Relatedness :National : New :
** End of Subsector **
Subsector H99: UNDETERMINED
Page 31
Subsector : H99 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 11201166/0001 Project Established
ICS : 03.100.30National Ref : DIN 79161-2Title : Playground inspection - Qualification of playground inspectors - Part 2: Examination and
certification
Relatedness :National : New :
Subsector : H99 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 11201167/0001 Project Established
ICS : 03.100.30National Ref : DIN 79161-1Title : Playground inspection - Qualification of playground inspectors - Part 1: Training and
education
Relatedness :National : New :
** End of Subsector **
** End of Sector **
Information procedure Page 32
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector I : MECHANICAL ENGINEERING
Register issued on : 2016-06-03
Page 33Subsector I01: SCREW THREADS
Subsector : I01 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : t1026-90/0001 Project Established
ICS : 21.060.20National Ref :Title : Fasteners-Shouldered Hexagon Nuts-Section: 90 Metric Fine Pitch Thread-Metric
Rounded Acme Thread- Product Grade AScope : This standard covers metric rounded acme fine pitch thread shouldered hexagon nuts.
Relatedness :National : NewEuropean : Modified DIN 30387:2007
Subsector : I01 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : t1026-92/0001 Project Established
ICS : 21.060.20National Ref :Title : Fasteners-Hexagon Nuts-Section 92-Collar Nuts Metric Coarse Thread With A Height of
1,5 dScope : This standard covers metric coarse pitch thread hexagon nuts with collar, with a heigh of 1,5
d
Relatedness :National : NewEuropean : Modified DIN 6331:2003
Subsector : I01 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : t1026100/0001 Project Established
ICS : 21.060.20National Ref :Title : Fasteners-Hexagon Nuts-Section: 100-Cap Nuts With Metric Coarse and Fine Thread-
Product Grade AScope : This standard covers metric coarse and fine pitch thread hexagon cap nuts assigned
Relatedness :National : NewEuropean : Modified DIN 917:2015
Subsector : I01 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : t1026101/0001 Project Established
ICS : 21.060.20National Ref :Title : Fasteners-Hexagon Nuts-Section: 101-Dommed Cap Nuts With Metric Coarse and Fine
Pitch Thread-Product Grades A and B
Page 34
Scope : This standard covers metric coarse and fine pitch thread hexagon domed cup nuts assigned to product grades A and B
Relatedness :National : NewEuropean : Modified DIN 1587:2014
Subsector : I01 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : tst61-98/0001 Project Established
ICS : 21.040.30National Ref :Title : Screw threads – Buttress threads - Part 98: 0,8 mm to 2 mm pitch – Dimensions and limit
sizesScope : This standard specifies dimensions and limit sizes of buttress threads having 0,8 mm to 2 mm
pitch
Relatedness :National : NewEuropean : Modified DIN 20401:2004
** End of Subsector **
Subsector I02: FASTENERS
Subsector : I02 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : t1026-77/0001 Project Established
ICS : 21.060.20National Ref :Title : Fasteners-Hexagon Nuts-Section: 77-Prevailing Torque Type Domed Cap Nuts With Non
Metallic Insert-Property Classes 5,6,8 and 10-Product Grades A and BScope : This standard covers metric coarse and fine pitch thread prevailing torque type domed cup
hexagon nuts with non-metallic insert.
Relatedness :National : NewEuropean : Modified DIN 986:2013
** End of Subsector **
Subsector I05: IRON PIPES
Subsector : I05 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026809/0001 Project Established
ICS : 23.040.10National Ref : ÖNORM B 2560Title : Ductile iron pipes - Finishing paints of polyurethane or epoxy materials - Requirements
and testsScope : This ÖNORM contains requirements and test applied of finishing layer ¿ made during the
manufacturing process - of polyurethane ("PU") or epoxy resin ("EP") for pipes made of ductile cast iron with factory-applied zinc coating ÖNORM B 2555 according to the
Page 35
ÖNORMEN EN 545, EN 598 and EN 969 This finishing layer is suitable for pipes, which are both above and below the water level installed in the soil with a soil resistance of more than 1500 O · cm. In differentiated assessment of the soil in accordance with the procedures contained in ÖNORM B 5013-1 tubes with this finishing layer can be used to a rating number of 15.
Relatedness :National : New :
** End of Subsector **
Subsector I09: SMALL TOOLS
Subsector : I09 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : t11761-2/0001 Project Established
ICS : 21.040.10National Ref :Title : Wire thread inserts for ISO metric screw threads –
Part 2: Tapped holes for thread inserts, thread tolerancesScope : This standard specifies limits of size and tolerances for tapped holes receiving wire thread
inserts designed to provide 2 mm to 52 mm diameter internal threads
Relatedness :National : NewEuropean : Modified DIN 8140-2:2005
Subsector : I09 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : t11761-3/0001 Project Established
ICS : 21.060.99National Ref :Title : Wire thread inserts for ISO metric screw threads –
Part 3: Gauges and gauge sizesScope : The document specifies dimensions of gauges for testing wire threads inserts for ISO-metric
screw threads.
Relatedness :National : NewEuropean : Modified DIN 8140-3:1993
Subsector : I09 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst03796/0001 Project Established
ICS : 25.140.30National Ref :Title : Wrenches for pipesScope : This standard covers adjustable metric wrenches for pipes, bolts and nuts.This standard
doesnit cover swedish pattern wrenches for pipes.
Relatedness :
Page 36
National : NewEuropean : Modified DIN 5234:1992
Subsector : I09 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst03796/0001 Project Established
ICS : 25.140.30National Ref :Title : Wrenches for pipesScope : This standard covers adjustable metric wrenches for pipes, bolts and nuts.This standard
doesnit cover swedish pattern wrenches for pipes.
Relatedness :National : NewInternational : Modified JIS B 4606:1995
** End of Subsector **
Subsector I11: MACHINE TOOLS
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 10:2009
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 138:2003
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10
Page 37
National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 1895:2007
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 204:1996
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 205:1996
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 206:2008
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10
Page 38
National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 212-2:2011
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 212-3:2011
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 2172-1:2013
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 2172-2:2007
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10
Page 39
National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 228-1:1987
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 228-2:1987
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 8011:2007
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 8050:1997
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10
Page 40
National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 8093-1:2013
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 8093-2:2013
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Modified DIN 9:1996
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 1420:1966
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10
Page 41
National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 1809:1961
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 208:1981
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 212-1:1979
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 2179:1975
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10
Page 42
National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 2180:1975
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 219:1981
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 311:1975
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 8051:1979
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10
Page 43
National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 8054:1979
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 8089:1979
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 8090:1981
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewEuropean : Not Equivalent to DIN 8094:1979
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10
Page 44
National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewInternational : Modified ISO 2238:2011
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewInternational : Modified ISO 2250:2009
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewInternational : Modified ISO 236-2:2013
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewInternational : Modified ISO 3466:2016
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10
Page 45
National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewInternational : Modified ISO 3467:2016
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewInternational : Not Equivalent to ISO 236-1:1976
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewInternational : Not Equivalent to ISO 2402:1972
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00078/0001 Project Established
ICS : 21.100.10National Ref :Title : ReamersScope : This standard covers reamers.
Relatedness :National : NewInternational : Not Equivalent to ISO 3465:1975
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10
Page 46
National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4950:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4951:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4952:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4953:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10
Page 47
National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4954:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4955:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4960:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4961:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10
Page 48
National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4963:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4964-1:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4965:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4971:1980
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10
Page 49
National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4972:1980
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4973:1980
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4975:1980
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4976:1980
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10
Page 50
National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4977:1980
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4978:1980
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4980:1980
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 4981:1980
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10
Page 51
National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 6580:1985
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 6581:1985
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 770-1:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 770-2:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10
Page 52
National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewEuropean : Not Equivalent to DIN 771:1962
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewInternational : Modified ISO 241:1994
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewInternational : Modified ISO 242:2014
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewInternational : Modified ISO 243:2014
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10
Page 53
National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewInternational : Modified ISO 513:2012
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewInternational : Modified ISO 514:2014
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewInternational : Modified ISO 883:2013
Subsector : I11 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst00095/0001 Project Established
ICS : 21.100.10National Ref :Title : Turning toolsScope : This standard covers turning tools.
Relatedness :National : NewInternational : Not Equivalent to ISO 504:1975
** End of Subsector **
Subsector I12: PULLEYS & BELTS
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Page 54
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewEuropean : Modified DIN 2215:1998
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewEuropean : Modified DIN 7753-1:1998
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewInternational : Modified ISO 1081:2014
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewInternational : Modified ISO 11749:2014
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Page 55
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewInternational : Modified ISO 24035:2014
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewInternational : Modified ISO 2790:2004
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewInternational : Modified ISO 5287:2003
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewInternational : Modified ISO 8419:2004
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Page 56
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewInternational : Modified ISO 9982:1998
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewInternational : Modified JASO E 107:2001
Subsector : I12 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : tst00198/0001 Project Established
ICS : 21.220.10National Ref :Title : V beltsScope : This standard specifies V belts
Relatedness :National : NewInternational : Modified JASO E 109:2011
** End of Subsector **
Subsector I19: NUCLEAR ENERGY
Subsector : I19 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 08000277/0001 Project Established
ICS : 11.040.50National Ref : DIN 6809-4Title : Clinical dosimetry - Part 4: X-ray therapy with X-ray tube voltages between 10 kV and
300 kV
Relatedness :National : New :
Page 57
Subsector : I19 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 08000282/0001 Project Established
ICS : 11.040.50National Ref : DIN 6827-1Title : Recording in medical application of ionizing radiation - Part 1: Therapy with electron
accelerators as well as X-ray and gamma-ray therapy systems
Relatedness :National : New :
** End of Subsector **
Subsector I27: EARTH MOVING AND CONSTRUCTION EQUIPMENT
Subsector : I27 Registration Date : 2016-05-03Organization : BSICountry : United Kingdom
Project ID : 01601276/0001 Project Established
ICS :National Ref : BS 5607Title : Code of practice for the safe use of explosives in the
construction industry
Relatedness :National : New :
** End of Subsector **
Subsector I31: VALVES
Subsector : I31 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 00300638/0001 Project Established
ICS :National Ref : 00300638Title : Stainless steel fittings for the food and chemical industry - Part 3: Hygienic clamp pipe
connection, short type
Relatedness :National : New :
Subsector : I31 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 00300639/0001 Project Established
ICS :National Ref : 00300639Title : Stainless steel fittings for the food and chemical industry - Part 1: Hygienic screwed pipe
connection, short type
Page 58
Relatedness :National : New :
Subsector : I31 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 00300640/0001 Project Established
ICS :National Ref : 00300640Title : Stainless steel fittings for the food and chemical industry - Part 2: Hygienic flanged pipe
connection, short type
Relatedness :National : New :
** End of Subsector **
** End of Sector **
Information procedure Page 59
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector M : METALLIC MATERIALS
Register issued on : 2016-06-03
Page 60Subsector M08: LIGHT ALLOYS
Subsector : M08 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0046132/0001 Draft for public enquiry
ICS :National Ref : PNE 38336Title : Wrought aluminium and aluminium alloys. 5000 series. AlMg. Alloy EN AW-5052/EN AW-
AlMg2,5.Scope : This standard specifies, for the alloy EN AW-5052 [EN AW-AlMg2,5] of wrought aluminium,
its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user.
Relatedness :National : REV/AMD UNE 38336:2003 :
Subsector : M08 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0046135/0001 Draft for public enquiry
ICS :National Ref : PNE 38339Title : Wrought aluminium and aluminium alloys. 5000 series. AlMg. Alloy EN AW-5754/EN AW-
AlMg3.Scope : This standard specifies, for the alloy EN AW-5754 [EN-AW-AlMg3] of wrought aluminium, its
chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user.
Relatedness :National : REV/AMD UNE 38339:2003 :
Subsector : M08 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0046136/0001 Draft for public enquiry
ICS :National Ref : PNE 38340Title : Wrought aluminium and aluminium alloys. 5000 series. AlMg. Alloy EN AW-5083/EN AW-
AlMg4,5Mn0,7Scope : This standard specifies, for the alloy EN AW-5083 [EN-AW-AlMg4,5Mn0,7] of wrought
aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user.
Relatedness :National : REV/AMD UNE 38340:2004 :
Subsector : M08 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18Project ID : P0046137/0001 Draft for public
Page 61
enquiryICS :National Ref : PNE 38341Title : Wrought aluminium and aluminium alloys. 5000 series. AlMg. Alloy EN AW-5086/EN AW-
AlMg4Scope : This standard specifies, for the alloy EN AW-5086 [EN-AW-AlMg4 of wrought aluminium, its
chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user.
Relatedness :National : REV/AMD UNE 38341:2004 :
Subsector : M08 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0046138/0001 Draft for public enquiry
ICS :National Ref : PNE 38342Title : Wrought aluminium and aluminium alloys. 6000 series. AlMgSi. Alloy EN AW-6061/EN
AW-AlMg1SiCu.Scope : This standard specifies, for the alloy EN AW-6061[EN-AW-AlMg1SiCu] of wrought
aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user.
Relatedness :National : REV/AMD UNE 38342:2000 :
Subsector : M08 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0046190/0001 Draft for public enquiry
ICS :National Ref : PNE 38312Title : Wrought aluminium and aluminium alloys. 2000 series. AlCu. Alloy EN AW-2017A, EN
AW-AlCu4MgSi(A).Scope : This standard specifies, for the alloy EN AW-2017A [EN AW-AlCu4MgSi(A)] of wrought
aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user.
Relatedness :National : REV/AMD UNE 38312:1999 :
Subsector : M08 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0046191/0001 Draft for public enquiry
ICS :National Ref : PNE 38313Title : Wrought aluminium and aluminium alloys. 2000 series. AlCu. Alloy EN AW-2014/EN AW-
AlCu4SiMg.Scope : This standard specifies, for the alloy EN AW-2014 [EN AW-AlCu4SiMg] of wrought
Page 62
aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user.
Relatedness :National : REV/AMD UNE 38313:2000 :
Subsector : M08 Registration Date : 2016-05-09Organization : AENORCountry : Spain Latest Date for Comments : 2016-06-18
Project ID : P0046192/0001 Draft for public enquiry
ICS :National Ref : PNE 38314Title : Wrought aluminium and aluminium alloys. 2000 series. AlCu. Alloy EN AW-2024, EN
AW-AlCu4Mg1.Scope : This standard specifies, for the alloy EN AW-2024 [EN AW-AlCu4Mg1] of wrought aluminium,
its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user
Relatedness :National : REV/AMD UNE 38314:2000 :
** End of Subsector **
** End of Sector **
Information procedure Page 63
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector N : NON-METALLIC MATERIALS
Register issued on : 2016-06-03
Page 64Subsector N01: PAPER AND BOARD
Subsector : N01 Registration Date : 2016-05-18Organization : TSECountry : Turkey
Project ID : t3011668/0001 Project Established
ICS : 55.040National Ref :Title : Paper TowelsScope : This standard specifies characteristics, types, sampling, inspection and marking of paper
towel which are made from soft tissue paper and tissue products
Relatedness :National : NewEuropean : Modified BS 1439:1992
Subsector : N01 Registration Date : 2016-05-18Organization : TSECountry : Turkey
Project ID : t3011668/0001 Project Established
ICS : 55.040National Ref :Title : Paper TowelsScope : This standard specifies characteristics, types, sampling, inspection and marking of paper
towel which are made from soft tissue paper and tissue products
Relatedness :National : NewInternational : Modified SANS 1887-4:2015
Subsector : N01 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst11668/0003 Project Established
ICS : 55.040National Ref :Title : Paper TowelsScope : This standard specifies characteristics, types, sampling, inspection and marking of paper
towel which are made from soft tissue paper and tissue products
Relatedness :National : NewEuropean : Modified BS 1439:1992
Subsector : N01 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : tst11668/0003 Project Established
ICS : 55.040National Ref :Title : Paper TowelsScope : This standard specifies characteristics, types, sampling, inspection and marking of paper
Page 65
towel which are made from soft tissue paper and tissue products
Relatedness :National : NewInternational : Modified SANS 1887-4:2015
** End of Subsector **
Subsector N02: SOLID FUELS
Subsector : N02 Registration Date : 2016-05-23Organization : SIST Draft Issue Date : 2016-07-01Country : Slovenia Latest Date for Comments : 2016-09-01
Project ID : 00005504/0001 Project Established
ICS : 75.160, 75.160.20National Ref : oSIST 1020:2016Title : Liquid Petroleum Products - Determination of mark indikator content in Fuel Oil Extra
Light and petroleumScope : In this standard are test methods for determination of mark indicator content in Fuel Oil
Extra Light and petroleum.
Relatedness :National : New :
** End of Subsector **
Subsector N04: REFRACTORIES
Subsector : N04 Registration Date : 2016-05-25Organization : BDSCountry : Bulgaria
Project ID : BG007001/0001 Project Established
ICS : 81.080National Ref : prBDS 13018Title : Aluminosilicate refractory mortarsScope : The standard refers to aluminosilicate refractory mortars, which consist of refractory
mixtures of ground fireclay or fireclay scrap, refractory clays and unwashed (raw) kaoline. Aluminosilicate refractory mortars are used to fill gaps in the performance of refractory masonry with aluminosilicate refractory products.
Relatedness :National : REV/AMD BDS 13018:1983 :
** End of Subsector **
Subsector N05: TEXTILES
Subsector : N05 Registration Date : 2016-05-03Organization : BSICountry : United Kingdom
Project ID : 01601101/0001 Project Established
ICS :National Ref : BS 2819:1990+A2Title : Methods for determination of Bow, skew and lengthway distortion in woven and
Page 66
knitted fabrics. Amendment
Relatedness :National : New :
** End of Subsector **
Subsector N06: RUBBER
Subsector : N06 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : ts2810-1/0001 Project Established
ICS : 91.100.50National Ref :Title : Elastomeric waterstops for sealing joints in concrete –
Part 1: Shapes and dimensionsScope : This standard covers elastomeric waterstops with and without steel stripes for sealing joints
in concrete.
Relatedness :National : NewEuropean : Modified DIN7865-1:2015-02
Subsector : N06 Registration Date : 2016-05-02Organization : TSECountry : Turkey
Project ID : ts2810-2/0001 Project Established
ICS : 91.100.50National Ref :Title : Elastomeric waterstops for sealing joints in concrete –
Part 2: Material specifications and testingScope : This standard covers elastomeric waterstops with and without steel stripes for sealing joints,
partly or fully embedded in concrete. This standard is valid for sealing joints against natural water according to TS 3440.
Relatedness :National : NewEuropean : Modified DIN7865-2:2015-02
** End of Subsector **
Subsector N07: SAWN TIMBER
Subsector : N07 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026803/0001 Project Established
ICS : 79.080National Ref : ÖNORM B 3013Title : Wooden raw profiles for windows - Requirements and test specificationsScope : This Standard specifies requirements for timber blanks and semi-finished profiles for non-
structural uses, including glued laminated and glued finger jointed products and the necessary testing and measurement methods
Page 67
Relatedness :National : New :
** End of Subsector **
Subsector N09: PLASTICS
Subsector : N09 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026805/0001 Project Established
ICS : 59.100.10National Ref : ÖNORM ISO 1887Title : Textile glass - Determination of combustible-matter contentScope : This International Standard specifies a method for the determination of the combustible-
matter content of products made from textile glass, such as continuous-filament yarns, staple-fibre yarns, rovings, chopped Strands, milled fibres, fabrics, and continuous-filament mats and other glass reinforcements.
Relatedness :National : New :
Subsector : N09 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026806/0001 Project Established
ICS : 59.100.10National Ref : ÖNORM ISO 2559Title : Textile glass - Mats (made from chopped or continuous strands) - Designation and basis
for specificationsScope : This International Standard provides a basis for specifications which is applicable only to
textile glass mats that are made from chopped or continuous strands bonded together by chemical or mechanical means and that are used for the reinforcement of plastics.
Relatedness :National : New :
Subsector : N09 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026807/0001 Project Established
ICS : 83.080.01National Ref : ÖNORM ISO 11359-1Title : Plastics - Thermomechanical analysis (TMA) - Part 1: General principlesScope : This part of ISO 11359 specifies the general conditions for the thermomechanical analysis of
thermoplastics and thermosetting materials, filled or unfilled, in the form of sheet or moulded parts.
Relatedness :National : New
Page 68
:
Subsector : N09 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601663/0001 Project Established
ICS : 13.030.50, 83.080.01National Ref : UNI1601663Title : Plastic raw-secondary materials - Part 1: Generality on plastic raw-secondary materials
and plastics by-products Scope : The standard classifies the plastic raw-secondary materials obtained from the recovery and
recycling of plastic waste and refers to plastics by-products .
Relatedness :National : REV/AMD UNI 10667-1:2010 :
** End of Subsector **
Subsector N14: PLASTICS PIPES
Subsector : N14 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026796/0001 Project Established
ICS : 23.040.20, 23.040.45National Ref : ÖNORM ISO 18488Title : Polyethylene (PE) materials for piping systems - Determination of Strain Hardening
Modulus in relation to slow crack growth -- Test methodScope : This Standard specifies a method for the determination of the strain hardening modulus
which is used as a measure for the resistance to slow crack growth of polyethylene. The strain hardening modulus is obtained from stress-strain curves on compression moulded samples. This Standard describes how such measurement is performed and how the strain hardening modulus shall be determined from such a curve. Details of the required equipment, precision, and sample preparation for the generation of meaningful data are given. This Standard provides a method that is valid for all types of polyethylene, independent from the manufacturing technology, comonomer, catalyst type, that are used for pipes and fittings applications.
Relatedness :National : New :
** End of Subsector **
** End of Sector **
Information procedure Page 69
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2016-06-03
Page 70Subsector S01: ACOUSTICS AND SOUND INSULATION
Subsector : S01 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 00100918/0001 Project Established
ICS : 17.140.01National Ref : DIN 45682Title : Acoustics - Thematic maps in the field of sound immission protection
Relatedness :National : New :
Subsector : S01 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601688/0001 Project Established
ICS : 17.140.20, 93.080.30National Ref : UNI1601688Title : Acoustics - CE marking of road traffic noise reducing devicesScope : The technical report is intended as a guideline for the application of the CE marking in
accordance with current legislation on construction products that constitute the road traffic noise reduction devices according to the tests listed in Appendix ZA of new EN 14388:2015 harmonized to Directive 89/106 / EEC on construction products (CPD). This technical report applies to all types of anti-noise systems defined by UNI 11160.
Relatedness :National : REV/AMD UNI/TR 11338:2009 :
** End of Subsector **
Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT
Subsector : S04 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00195921/0001 Project Established
ICS :National Ref : PRNF S74-604Title : Protective clothing - Determination of the availability of the energy absorption ability of
airbags
Relatedness :National : New :
** End of Subsector **
Subsector S07: ANAESTHETIC AND RESPIRATORY EQUIPMENT
Subsector : S07 Registration Date : 2016-05-26Organization : UNMZCountry : Czech RepublicProject ID : 85001016/0001 Draft for public
Page 71
enquiryICS :National Ref :Title : Terminal units for medical gas pipeline systems - Dimensional requirementsScope : This standard specifies requirements for probes (quick connectors) used with pipeline
systems for medical gases, including air, oxygen, nitrous oxide, carbon dioxide, and for vacuum. This standard does not apply to components used for non-clinical purposes, within medical equipment or on the patient side.
Relatedness :National : New :
** End of Subsector **
Subsector S08: AIR QUALITY
Subsector : S08 Registration Date : 2016-05-30Organization : PKNCountry : Poland
Project ID : 15901399/0001 Project Established
ICS : 13.040.30National Ref : prPN-Z-04481Title : Air purity protection -- Determination of tetrahydrofuran in workplaces by gas
chromatography with flame-ionization detectionScope : This standard gives a method for the determination of the content of tetrahydrofuran (CAS:
109-99-9) in workplace air by gas chromatography with flame-ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of tetrahydrofuran which can be determined by the method in the sampling and determination conditions specified in the standard is 15 mg/m3
Relatedness :National : New :
Subsector : S08 Registration Date : 2016-05-30Organization : PKNCountry : Poland
Project ID : 15901400/0001 Project Established
ICS : 13.040.30National Ref : prPN-Z-04482Title : Air purity protection -- Determination of N,N’-bis(2-aminoethyl)ethylenediamine in
workplaces by high performance liquid chromatography with spectrophotometric detection
Scope : This standard gives a method for the determination of the content of N,N’- bis( 2-aminoethyl)ethylenediamine (CAS: 112-24-3) in workplace air by high performance liquid chromatography with spectrophotometric detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of N,N’-bis(2-aminoethyl)ethylenediamine which can be determined by the method in the sampling and determination conditions specified in the standard is 0,1 mg/m3
Relatedness :National : New :
Page 72
Subsector : S08 Registration Date : 2016-05-30Organization : PKNCountry : Poland
Project ID : 15901401/0001 Project Established
ICS : 13.040.30National Ref : prPN-Z-04483Title : Air purity protection -- Determination of acetic anhydride in workplaces by high
performance liquid chromatography with spectrophotometric detectionScope : This standard gives a method for the determination of the content of acetic anhydride (CAS:
108-24-7) in workplace air by high performance liquid chromatography with spectrophotometric detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of acetic anhydride which can be determined by the method in the sampling and determination conditions specified in the standard is 1,2 mg/m3
Relatedness :National : New :
Subsector : S08 Registration Date : 2016-05-30Organization : PKNCountry : Poland
Project ID : 15901402/0001 Project Established
ICS : 13.040.30National Ref : prPN-Z-04484Title : Air purity protection -- Determination of 1,1-dichloroethene in workplaces by gas
chromatography with flame-ionization detectionScope : This standard gives a method for the determination of the content of 1,1-dichloroethene
(CAS: 75-35-4) in workplace air by gas chromatography with flame-ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of 1,1-dichloroethene which can be determined by the method in the sampling and determination conditions specified in the standard is 0,8 mg/m3
Relatedness :National : New :
Subsector : S08 Registration Date : 2016-05-30Organization : PKNCountry : Poland
Project ID : 15901403/0001 Project Established
ICS : 13.040.30National Ref : prPN-Z-04485Title : Air purity protection -- Determination of 2-methyl-4,6-dinitrophenol in workplaces by high
performance liquid chromatography with spectrophotometric detectionScope : This standard gives a method for the determination of the content of 2-methyl-4,6-
dinitrophenol (CAS: 534-52-1) in workplace air by high performance liquid chromatography with spectrophotometric detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of 2-methyl-4,6-dinitrophenol which can be determined by the method in the sampling and determination conditions specified in the standard is 0,005 mg/m3
Relatedness :
Page 73
National : New :
Subsector : S08 Registration Date : 2016-05-30Organization : PKNCountry : Poland
Project ID : 15901404/0001 Project Established
ICS : 13.040.30National Ref : prPN-Z-04486Title : Air purity protection -- Determination of acrylamid in workplaces by high performance
liquid chromatography with spectrophotometric detectionScope : This standard gives a method for the determination of the content of acylamide (CAS:
79-06-1) in workplace air by high performance liquid chromatography with spectrophotometric detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of acrylamide which can be determined by the method in the sampling and determination conditions specified in the standard is 0,007 mg/m3
Relatedness :National : New :
** End of Subsector **
Subsector S09: WATER QUALITY AND WATER SUPPLY
Subsector : S09 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026798/0001 Project Established
ICS : 13.060.50National Ref : ÖNORM ISO 6333Title : Water quality -- Determination of manganese -- Formaldoxime spectrometric methodScope : This Standard includes a procedure the Determination of manganese in surface and drinking
water. The procedure is applicable to concentrations between 0,01 mg/l and 5 mg/l. Concentrations above 5 mg/l may be determined after suitable dilution of the sample.
Relatedness :National : New :
Subsector : S09 Registration Date : 2016-05-27Organization : UNMZ Draft Issue Date : 2016-06-30Country : Czech Republic Latest Date for Comments : 2016-09-30
Project ID : 75000716/0001 Project Established
ICS :National Ref :Title : Water quality – Rapid method for determination of gross alpha activityScope : This standard applies for the rapid determination of grossl alpha activity in the waters. The
method is intended primarily for use in a radiological emergency
Relatedness :National : New :
Page 74** End of Subsector **
Subsector S18: STERILIZATION OF EQUIPMENT
Subsector : S18 Registration Date : 2016-05-02Organization : AFNORCountry : France
Project ID : 00195858/0001 Project Established
ICS :National Ref : PR NF S98-002Title : Requirements for the development, validation and routine control of a sterilisation
process for medical devices using hydrogen peroxide
Relatedness :National : New :
** End of Subsector **
Subsector S27: WASTE - CHARACTERIZATION, TREATMENT AND STREAMS
Subsector : S27 Registration Date : 2016-05-23Organization : ASICountry : Austria
Project ID : 00026800/0001 Project Established
ICS : 13.030.40, 91.040.01National Ref : ÖNORM B 3151Title : Dismantling of buildings as a standard method for demolitionScope : The present ÖNORM describes the measures needed for the planning and execution of the
dismantling of buildings and specifies separation principles for the different materials in regard to recovery or disposal. The dismantling objective is to obtain mono-material mostly free of harmful substances and impurities. If ecologically appropriate, technically possible and not unreasonably cost-intensive, the waste products of the dismantling process shall be recovered. Harmful substances and impurities have to be examined and separated to obtain recyclable mono-fraction demolition materials. The present ÖNORM describes the dismantling in structural and civil engineering including line construction works and paved area.
Relatedness :National : New :
** End of Subsector **
** End of Sector **
Information procedure Page 75
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2016-06-03
Page 76Subsector T02: AEROSPACE
Subsector : T02 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 13115613/0001 Project Established
ICS :National Ref : 13115613Title : Aerospace series - Powder for additive manufacturing with powderbed process -
technical delivery specification
Relatedness :National : New :
** End of Subsector **
Subsector T14: PACKAGING
Subsector : T14 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601820/0001 Project Established
ICS : 55.160National Ref : UNI1601820Title : Wood packages and special packages - Audit - Principles, criteria and managementScope : The standard defines the management criteria for the inspection of wooden packaging and
special packaging.
Relatedness :National : REV/AMD UNI 10986:2002 :
Subsector : T14 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601854/0001 Project Established
ICS : 55.160National Ref : UNI1601854Title : Wood packaging - Guidelines for foldable wooden boxes constructionScope : The technical report gives indications for design and manufacturing of foldable wooden
boxes.
Relatedness :National : New :
Subsector : T14 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 11501206/0001 Project Established
ICS :National Ref : 11501206
Page 77
Title : Transportation chain for meat and meat products - Part 6: Pallet made from polyethylene, 800 mm × 1200 mm × 160 mm; Construction, requirements and test
Relatedness :National : New :
Subsector : T14 Registration Date : 2016-05-10Organization : TSECountry : Turkey
Project ID : t0109668/0001 Project Established
ICS : 55.040, 67.240National Ref :Title : Sensory analysis – Testing of packaging materials and packages for food productsScope : This standard specifies a sensory analysis method for packaging materials and packages for
food products to assess their compatibility with food products.
Relatedness :National : NewEuropean : Identical to DIN 10955:2004
** End of Subsector **
Subsector T18: ELEVATING PLATFORMS
Subsector : T18 Registration Date : 2016-05-03Organization : BSICountry : United Kingdom
Project ID : 01601277/0001 Project Established
ICS :National Ref : BS 8460Title : Safe use of MEWPS. Code of practice
Relatedness :National : New :
Subsector : T18 Registration Date : 2016-05-03Organization : BSICountry : United Kingdom
Project ID : 01601327/0001 Project Established
ICS :National Ref : BS 6037-1Title : Planning, design, installation and use of permanently installed access equipment. Code
of practice. Part 1: Suspended access equipment
Relatedness :National : New :
** End of Subsector **
Subsector T20: TRAM- AND RAILWAY ENGINEERING
Subsector : T20 Registration Date : 2016-05-02
Page 78
Organization : AFNORCountry : France
Project ID : 00196115/0001 Project Established
ICS :National Ref : prNF F19-481Title : Railway rolling stock - self adhesive marks
Relatedness :National : New :
Subsector : T20 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 08701250/0001 Project Established
ICS :National Ref : 08701250Title : State of railway vehicles - Brake - Part 6: Magnetic track brake
Relatedness :National : New :
Subsector : T20 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 08701251/0001 Project Established
ICS :National Ref : 08701251Title : State of railway vehicles - Brake - Part 8: Tightness and efficiency
Relatedness :National : New :
Subsector : T20 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 08701252/0001 Project Established
ICS :National Ref : 08701252Title : State of railway vehicles - Brake - Part 9: Function of driver's brake valve, control devices
and indicators in driver's cabs
Relatedness :National : New :
Subsector : T20 Registration Date : 2016-05-17Organization : DINCountry : GermanyProject ID : 08701253/0001 Project
Page 79
EstablishedICS :National Ref : 08701253Title : State of railway vehicles - Brake - Part 10: Function of emergency brake equipment and
emergency brake override
Relatedness :National : New :
** End of Subsector **
Subsector T99: UNDETERMINED
Subsector : T99 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 06003623/0001 Project Established
ICS :National Ref : 06003623Title : Platform scales - Part 5: Design loads for bridges of road weighbridges
Relatedness :National : New :
Subsector : T99 Registration Date : 2016-05-17Organization : DINCountry : Germany
Project ID : 06003624/0001 Project Established
ICS :National Ref : 06003624Title : Platform scales - Part 6: Design loads for rail weighbridges and combined rail and road
weighbridges bridges
Relatedness :National : New :
** End of Subsector **
** End of Sector **
Information procedure Page 80
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector X : UNDETERMINED STANDARDIZATION AREA
Register issued on : 2016-06-03
Page 81Subsector X01: UNDETERMINED STANDARDIZATION AREA (NON-ELECTRICAL)
Subsector : X01 Registration Date : 2016-05-27Organization : NSAICountry : Ireland
Project ID : 00000901/0001 Project Established
ICS : 67.020, 67.020National Ref : I.S. 342:201x Title : Guide to good hygiene practice for the food processing industry in accordance with the
Council Directive 93/43/EEC on the hygiene of foodstuffsScope : This Irish Standard is a guide to good hygiene practice, which meets the requirements of
Council Directive 93/43/EEC on the hygiene of foodstuffs, which has been approved by the Department of Health. It shall apply to all food processing companies, with the exception of the Meat, Dairy and Fish processing sectors which are required to comply with specific community food hygiene rules. This Standard shall only apply to those food-related activities under the direct control of the food processing company. Food processing companies complying with the requirements of this Standard also comply with the requirements of the Council Directive 93/43/EEC. The scope of this Standard is limited to: - Buildings where the maximum number of storeys is four and the maximum height from the external ground level to the top floor level is 10 m; - Buildings where the maximum fire resistance is 60 minutes; - Buildings where timber materials are subject to either service classes 1 or 2; - Stud centres up to a maximum of 610 mm; - Panels manufactured using mechanical fasteners; - Buildings that have an outer leaf of masonry or timber cladding with a drained and ventilated cavity behind the outer leaf. Other external claddings, where a drained and ventilated cavity is provided, are allowed by this Standard provided they have an approval certificate. The on-site fabrication of timber frame wall panels is outside the scope of this Irish Standard.
Relatedness :National : REV/AMD I.S. 342:201x :
** End of Subsector **
** End of Sector **
Information procedure Page 82
Monthly Notifications Register
Notifications registered at CCMC from 2016-05-01 to 2016-05-31
Sector Z : INFORMATION TECHNOLOGY
Register issued on : 2016-06-03
Page 83Subsector Z99: UNDETERMINED
Subsector : Z99 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601822/0001 Project Established
ICS : 35.020National Ref : UNI1601822Title : Unregulated professional activities - ICT professional profiles - Part 7: Geographic
Information professional profiles Scope : This proposal aims to use the tools provided by the related part 1 "Methodology for the
construction of professional profiles based on the e-CF system" in order to define the third-generation professional profiles concerning the professionalism in the field of geographic information.
Relatedness :National : New :
Subsector : Z99 Registration Date : 2016-05-30Organization : UNICountry : Italy
Project ID : 01601856/0001 Project Established
ICS : 35.020National Ref : UNI1601856Title : Unregulated professional activities - Professions in the ICT domain - Elements for the
assessment and validation of learning outcomesScope : The standard defines the elements for the assessment and validation of learning outcomes
as well as the ethical aspects applicable to the knowledge, ability and competence of the professional profiles in the ICT field defined in UNI EN 16234-1. The standard defines the certification procedures against the UNI 11621 multi-part standard.
Relatedness :National : REV/AMD UNI 11506:2013 :
** End of Subsector **
** End of Sector **
2011-06
List of non-electrotechnical subsectors
Sector A: Services
Subsector Title ISO/TC CEN/TC
reference reference
A01 Tourist services / 329; CEN/WS ETO
A02 Cleaning services / 328
A03 Postal services / 331
A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM
A05 Maintenance services / 319
A06 Building and construction services / 330
A07 Translation services /
A08 Funeral services / CEN/BT/TF 139
A09 Facility management / 348
A10 Services of Real Estate Agents / CEN/BT/TF 180; 373
A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4
A12 Consultancy Services / 395; 381
A13 Expertise Services / 405
A14 Aesthetic Services / 403;409
A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404
Sector B: Building and construction
Subsector Title ISO/TC CEN/TC
reference reference
B01 Fire protection 21 70; 72; 191; 192
B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340
B03 Concrete 71 104; CEN/WS 009
B04 Cement 74; 77 51
B05 Fire tests 92 127
B06 Gypsum / 241
B07 Glass 160 129
B08 Doors and windows 162 33
B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036
B10 Timber structures 165 124
B11 Metal structures 167 135
B12 Masonry 179; 196 125; 246
B13 Solar energy 180 312
B14 Geotechnics 182 341; 396
B15 Sanitary appliances / 163; 7
B16 Taps / /
B17 Lighting equipment and lighting / 50; 169 application technology
B18 Scaffolding / 53
B19 Ceramic tiles 189 67
B20 Drainage equipment / 165
B21 Baths / /
B22 Wallcoverings / 99
B23 District heating / 107
B24 Auxiliary and handicraft work / /
B25 Gas distribution installation and / 234; 235; 282 related equipment
B26 Road building and maintenance / 178; 227
B27 Waterproofing materials / 128; 254; 361; 314
B28 Floor coverings 38/SC 12 134
B29 Aggregates / 154
B30 Floor and surfacing / 217; 303; 323; 390
B31 Heating systems in buildings / 228; 247
B32 Precast concrete products / 177; 229
B33 Building design 205 315; 325; 388
B34 Building and construction – Environmental aspect 350; 351
B99 Undetermined / /
Sector C: Chemicals, chemical engineering and food products
Subsector Title ISO/TC CEN/TC
reference reference
C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054
C02 Paints and related products 35 139; 298; 173
C03 Chemistry 47 317; 363
C04 Laboratory glassware 48 332
C05 Lac / /
C06 Essential oils 54 /
C08 Pesticides 81 /
C09 Surfactants 91 276
C10 Starch 93 /
C11 Tobacco 126 401
C12 Glass plant / /
C13 Fertilizers 134 223; 260
C16 Wood preservatives / /
C17 Trees and plants / /
C18 Adhesives / 193
C19 Chemical analysis 201; 202 382; 347
C20 Explosives and firework / 212; 321
C21 Cosmetics 217 392
C22 Bio-Based products / 411
C99 Undetermined / 386
Sector F: Fundamental standards
Subsector Title ISO/TC CEN/TC
reference reference
F01 Technical drawings 10 /
F02 Units & symbols 12 /
F03 Preferred numbers 19 /
F04 Sieves 24 /
F05 Measuring instruments 30; 113 92; 171; 176; 237;
294; 318; 244; 367; 141; CEN/WS 011
F06 Terminology principles 37 /
F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08 Surfaces / 290
F09 Banking 68 /
F10 Statistics 69 /
F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13 Environmental tests / /
F14 Graphical technology, 130 / sign-boards and nameplates
F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16 Graphical symbols 145 /
F17 Administrative documents 154 CEN/WS MMU
F18 Micrographics 171 /
F19 Optics 172; 187 123; 170
F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21 Value analysis and project / 279 network
F22 Logistics / 379; 273
F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;
Sector H: Products for household and leisure use
Subsector Title ISO/TC CEN/TC
reference reference
H01 Cinematography 36 372
H02 Photography 42 /
H03 Consumer questions / 291
H04 Sports equipment 83 136
H05 Oil and gas burners / 47; 131
H06 Horology 114 /
H07 Space heating 116 62; 110; 130; 179; 180
H08 Sizing systems 133; 137 /
H09 Furniture 136 207
H10 Sewing machines 148 /
H11 Heater controls 161 58
H12 Ceramic and glass-ware for food 166 /
H13 Jewellery 174 CEN/WS 047
H14 Caravans 177 245
H15 Toys 181 52
H17 Oil stoves / 46
H18 Central heating boilers / 48; 57; 109; 269
H19 Non-electric cookers and barbecues / 49; 281; 295
H22 Smokers’ lighters and matches / 355; 87
H23 Ladders / 93
H24 Tactile danger warnings / /
H25 Large gas appliances / 106; CEN/CLC/JWG FCGA
H26 Sealing materials / 108; 208
H27 Educational equipment / /
H28 Hunting 191 /
H29 Heat pumps / 113
H30 Equipment for children / 252
H31 Dedicated LPG appliances / 181
H32 Culinary utensils 186 194
H33 Footwear (excluding protective / 309 footwear)
H34 Child safety / CEN/BT/WG 117 398
H99 Undetermined / 299; 364; 369; 402
Sector I: Mechanical engineering
Subsector Title ISO/TC CEN/TC
reference reference
I01 Screw threads 1 /
I02 Fasteners 2 185
I03 Limits & fits / /
I04 Rolling bearings 4 /
I05 Iron pipes 5 203
I06 Pressure vessels 11 54
I07 Shafts 14 /
I08 Agricultural machines 23 144, 334
I09 Small tools 29 213
I10 Splines / /
I11 Machine tools 39 142; 143; 145; 255
I12 Pulleys & belts 41 188
I13 Gas containers 58 23; 286
I14 Gears 60 /
I15 Equipment for petroleum industry 67 12
I16 Internal combustion engines 70; 192 270
I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025
I18 Mining 82 196
I19 Nuclear energy 85 /
I20 Refrigeration 86 44; 182
I21 Chains and chain wheels 100 /
I22 Vacuum technology 112 /
I23 Pumps 115 197
I24 Industrial fans 117 356
I25 Compressors 118 232
I26 Plain bearings 123 /
I27 Earth moving and construction 127; 195 151 equipment
I28 Fluid power 131 /
I29 Gas cleaning / 195
I30 Air distribution / 156
I31 Valves 153; 185 69; 236; 105
I32 Flanges / 74
I33 Information processing in 184 310 automation
I34 Non-ferrous metallic pipes / /
I35 Leisure and recreational machines / 152
I36 Thermoprocessing technology / 186
I37 Printing and paper machines / 198
I38 Leather production, tannery and / 200; 201 related machinery
I39 Machines for metal processing / 202; 322
I40 Industrial piping networks / 267
I41 Membrane filters / 272
I42 Potentially explosive atmospheres / 305
I43 Hydrogen energy 197 /
I44 Nanotechnologies 229 352
I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059
Sector M: Metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02 Zinc / 209
M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron
M04 Copper 26 133
M05 Welding 44 121
M06 Dimensions of wrought products / /
M07 Manganese and chromium 65 /
M08 Light alloys 79 132
M09 Iron ores 102 /
M10 Metallic coatings 107 240
M11 Powder metallurgy 119 /
M12 Aluminium ores 129 /
M13 Ferroalloys 132 /
M14 Nickel 155 /
M15 Metallic corrosion 156 262; 219
M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17 Heavy metal ores 183 /
M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407
M20 Tin and tin alloys / 220
M21 Precious metals / 283
M22 Lead and lead alloys / 306
M99 Undetermined / /
Sector N: Non-metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
N01 Paper and board 6 172
N02 Solid fuels 27 335; 343;383; CEN/WS 019
N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061
N04 Refractories 33 187
N05 Textiles 38 189; 248
N06 Rubber 45 218; 366 CEN/WS 003
N07 Sawn timber 55 38; 175
N08 Mica / /
N09 Plastics 61 249
N10 Cork 87 /
N11 Wood-based panels 89 112
N12 Timber products 99 /
N13 Leather 120 289
N14 Plastics pipes 138 155
N17 Fluorspar 175 /
N18 Glass-fibre reinforced plastics / /
N19 Tapes / 253
N20 Ceramics 206 184
N21 Gaseous fuels and combustible gas 158; 193 238; 408
N22 Feather and related materials / 222
N23 Diamond / 410
N99 Undetermined / /
Sector S: Health, environment and medical equipment
Subsector Title ISO/TC CEN/TC
reference reference
S01 Acoustics and sound 43 126; 211 insulation
S02 Transfusion equipment 76 /
S03 Syringes 84 /
S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043
S05 Dentistry 106 55
S06 Vibration & shock 108 231
S07 Anaesthetic and respiratory 121 215 equipment
S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI
S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034
S10 Surgical implants 150 285; CEN/CLC/JWG AIMD
S11 Contraceptives 157 /
S12 Gas analysis / /
S13 Ergonomics 159 122
S14 Prosthetics 168 /
S15 Surgical instruments 170 /
S16 Aids for the disabled 173 293
S17 Respiratory protective devices / 79
S18 Sterilization of equipment 198 102; 204
S19 First aid equipment and rescue systems / 239
S20 Waste collection, handling and / 183 transportation
S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055
S22 Energy saving / CEN/WS 005 CEN/WS 015
S23 Personal & property protection against aggression/Burglary protection / 263
S24 Soil quality 190 345; CEN/WS 032
S25 Chemical disinfectants and / 216 antiseptics
S26 Environmental management 207 CEN/TC 406; CEN/WS 040
S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120
S28 Demining / CEN/WS 029 CEN/WS 013
S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging
Subsector Title ISO/TC CEN/TC
reference reference
T01 Shipbuilding and maritime 8; 188 15; 300 structures
T02 Aerospace 20 274; AECMA; ECSS ;377
T03 Road vehicles 22 301; 326 CEN/WS IMA
T04 Tyres 31 /
T05 Pallets 51 /
T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393
T07 Glass containers 63 /
T08 Cranes 96 147
T09 Materials handling and 101 148; 149 storage equipment
T10 Freight containers 104 119; 280
T11 Steel wire ropes 105 /
T12 Industrial trucks 110 150; 324
T13 Lifting chains, hooks and ropes 111 168
T14 Packaging 122 261; 120
T15 Cycles 149 333
T16 Lifts & escalators 178 10; 242
T17 Builders hoists / /
T18 Elevating platforms / 98
T19 Road safety / 226; 339
T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR
T21 Packaging machines / 146
T22 Off-road vehicles / 354
T99 Undetermined / CEN/WS TAF
Sector Z: Information technology
Subsector Title ISO/TC CEN/TC
Z01 Radiocommunication for IT / /
Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI
Z03 Common O.S.I. activities / CEN/CLC - EWOS
Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;