Info MIG MAP GB 06 2013 - Amazon Simple Storage Service · † Rubber water cooled power cable ......
Transcript of Info MIG MAP GB 06 2013 - Amazon Simple Storage Service · † Rubber water cooled power cable ......
MIG-Alps-PowerMIG torch series
06/2013
air cooled
control plug
MIG/MAG torch series MAP
Central connector LF fits MIG/MAG power sources of themanufacturer “fronius”
Central connector GZ-2F (Euro connector) fits mostwelding plant in the marketgas
gas
control pins
MAP – air cooled
• Improved torch cooling– longer life time– less wear
• Rubber coaxcable– flexibel– big copper cross-section– better thermal resistance– UV resistance– standard connections
MAP – water cooled
• Improved torch cooling– big cooling channels– big cooling surfaces– cooling up to the torch tip
• Rubber water cooled power cable– flexible even with cold environment– better thermal resistance– special pressing of copper strand
for optimal electrical contact
weldingwire
welding wire
• Handle RMC MIG– approved on/off switch– TPU handle pads– ball joint– anti kink spring
Control options:– standard (on/off)– up/down– display
Technical specifications conform to EN 60 974-7
Model Capacity Duty Cycle Wire Ø
CO2 Mixed gas M21
RM 230 L 230 A 200 A 40% 0.6–1.0 mm
RM 300 L 300 A 250 A 40% 0.8–1.2 mm
RM 400 L 400 A 350 A 40% 1.0–1.6 mm
RM 400 L RM 300 L RM 230 L
MIG-Alps-PowerThe MIG/MAG torch series “MIG-Alps-Power” (MAP) is a high performancealternative opposite to conventional “Euro” torches. By technologicalimprovements better performances and lesser wear will be reached. Bettercooling, improved thermal- and electrical conductivity as well as forcedcontact of welding wire in the torch neck have been implemented. Theseadvantages save costs in the daily use. Identical wear parts for gas- andwater cooled torches of same size simplify the supply.
The newly conceived handle “RMC MIG” fits the weldors hand agreeably andsecurely in each welding position. The handle pads and the ball joint supportthe weldor in his movements and enable fatigueless working thanks to asuperb ergonomic design. The RMC-MIG-Handle offers options for remotecontrol of the welding parameters and has options for up/down control ofthe welding current.
With these features the MAP series sets new standards for MIG/MAG manualwelding torches. MAP torches represent the optimum for economic weldingwith an excellent price/ performance relation.
water cooledMIG/MAG torch series MAP
control plug
Central connectorWF I – internal water circuitWF EX – external water circuit fitting MIG/MAG power sources of themanufacturer “fronius”
Standard handleon/off
Central connectorWZ-2F (Euro connector) fits mostpower sources in the market
water in
water out
water in
water out
gas
gas
weldingwire
control pins
Up/down handleon/offcurrent control
Display handleon/offcurrent controlchoice of program
RM 250 W RM 400 W RM 500 W
weldingwire
Handle RMC MIG
CO2 Mixed gas M21
RM 250 W 250 A 220 A 100% 0.6–1.2 mm
RM 400 W 400 A 350 A 100% 0.8–1.2 mm
RM 500 W 500 A 400 A 100% 1.0–1.6 mm
Technical specifications conform to EN 60 974-7
Model Capacity Duty Cycle Wire Ø
The multi-MIG system
The multi-MIG system enables the weldor to change torch neck rapidlyby hand. The various multi-MIG torch necks are turnable over 360° andpermit the weldor the optimal setting of the desired welding position.
0°
15°
L
30°
45°L
MIG/MAG wear partsfitting MAP torches
Contact tips
standard with centre bore hole nickel-plated
M6 L=33 mm M8 L=35 mm M10 L= 40 mm
M6 M8 M10
Tip holder/diffuser
Gas nozzles
Liners – nude Liners – isolate
DiverseRohrman Schweißtechnik is a family company with over 40 yearsexperience in welding.
We produce and sell MIG/MAG and TIG welding torches with allnecessary wear parts and spares.
Further products are MIG/MAG interconnection cable packages,gas cutting torches, automatic darking welding helmets and more.
We sell through regional welding distributors. For furtherinformation contact your distributor or contact us.
suitable RM 230 L/RM 250 W suitable RM 300 L/RM 400 W suitable RM 400 L/RM 500 W
fixing sleeve
insulator
gas diffusor
GB
Info
06
/13
Rohrman Schweißtechnik GmbHHosterfeldstraße 2 · D-41747 Viersen
Tel. +49(0)2162/106065-0Fax +49(0)2162/106065-55