Industrial Ventilation and Air Pollution Control
-
Upload
john-kleinfelter -
Category
Documents
-
view
307 -
download
7
description
Transcript of Industrial Ventilation and Air Pollution Control
Industrial Ventilation and Air Pollution Control Services
• Industrial Ductwork Design
• Fabrication Services
• Turn-key Installation Services
• Access Platforms, Stairs and Ladders
• Structural Steel
• Make-Up Air Systems
• Exhaust Gas Recirculation
• Heat Recovery
• EPA Method 204 PTEs
This is What GSM Industrial Offers:• General Contracting to Integrate Your Air Pollution Control Devices and/or Manufacturing Equipment
•OEM Subcontracting• In-house Design, Fabrication, and Installation Services
Industrial Ventilation
• Fugitive Emission Capture Systems: o Hoods, Floor Sweepso EPA Method 204 Permanent Total Enclosures (PTE)
Industrial Ventilation
• Air Make Up Systems
• Fugitive Emission Capture Systems
• Air Handling Systems
Industrial Ventilation
• Particulate Control Systems
• Oil Mist Collectors/Separators
• Custom-designed Systems
Equipment Installation Services• Particulate Control:
o Bag Houseso Cartridge Collectorso Cyclones
• VOC/HAP Controlo RTO’so Catalytic Oxidizers
Industrial Ductwork• Design, Fabrication, Installation
• Duct Sizing via System Loss Analysis
• Light to Heavy Gage Designed to SMACNA and ASHRAE Specifications
• Fugitive Emission Capture Systems: o Hoods, Floor Sweepso Permanent Total Enclosures (PTE)
Fabrication Capabilities:• Over 110,000 sq. feet of fabrication floor space•In-house sand/media blasting•In-house large, drive-through, blast and paint booths.
•Industrial Ductwork: light Gage Through 1-inch
thick
• Refractory Linings
• Bag Houses, Cyclones, etc.
• Build to Print, or Design from Scratch
• Access Platforms, Stairs and Ladders
• Structural Steel
• Make-Up Air Systems
Fabrication Capabilities:• AWS Certified Welders• 10 Over-head bridge cranes• Over 20-feet to the bottom of the hook on all bridge cranes• Cyclones, bag houses, etc.
Fabrication Capabilities:• Internal insulation: ceramic fiber, refractory linings, etc.
• Expertise in welding various allows; cor-ten, SS310, 253MA, Inconel/Monel, etc.
• Large steel stacks and test platforms
• Large diameter ductwork; up to 16-feet diameter
Emission Stacks• Vortex Shedding Analysis
• Active/Passive Vibration Dampingo Helical StrakesoTuned Mass/Liquid-filled Dampers
Custom Fabrication Services• Exhaust Gas Recirculation
• Heat Recovery
•Internal/External Insulation
Design Services• AutoCAD 2D and 3D (Inventor)
• Procurement of Field Measurements
• General Arrangement Drawings
Turnkey Projects• Expert Project Managers
• Professional Field Crews
• Cradle to Grave Project Management
www.gsmIndustrial.com
John KleinfelterVice President – Field ServicesDirect: 717-207-7765 Mobile: 717-725-78853249 Hempland Road Lancaster, PA [email protected]