7/28/2019 Industrial Training Report Submission Guidelines for engineering students

1/6

Industrial Training Report Submission Guidelines

Submission of Report to the Department: The students will submit their project reportin the prescribed format. The following material must be submitted:

Two Hard bound Copy of the Project Report for submission. (one for University,one for College) Color of the outer cover must be BLACK Students should prepare one more hard copy for their own.Soft copy of report including the code on CD in a thick envelope pasted inside of the back cover of the project report.The Project Report may be about 70-100 pages.

Report Format: The write up must adhere to the guidelines and should include thefollowing.Title PageCompany CertificateDeclaration by candidatesAcknowledgementTable of contentsList of tablesList of figuresAcronymsAbstractOrganization ProfileChapter 1: IntroductionChapter 2: Objective and scope of the ProjectChapter 3: Requirement analysisChapter 4: MethodologyChapter 5: Hardware & Software usedChapter 6: Project DesignBibliographyAppendix

Page number should start from abstract to chapter no 7 from 1 onwards

The following suggested guidelines must be followed in preparing theFinal Report:Good quality white paper A4 size should be used for typing and duplication. Care should

be taken to avoid smudging while duplicating the copies.Page Specification: (Written paper and source code)Left margin - 3.0 cmsRight margin- 2.0 cms Top margin 2.54 cms Bottom margin 2.54 cmsPage numbers - All text pages as well as Program source code listing should be numberedat the bottom center of the pages.Normal Body Text: Font Size : 12, Times New Roman, Double Spacing, Justified.Paragraph Heading Font Size: 14, Times New Roman, Underlined, Left Aligned.

7/28/2019 Industrial Training Report Submission Guidelines for engineering students

2/6

12 point .Chapter Heading Font Size: 20, Times New Roman, Left Aligned, 30 point

ACKNOWLEDGEMENT: In the Acknowledgement page, the writer recognizes hisindebtedness for guidance and assistance of the different persons and members of the

faculty. Courtesy demands that he also recognize specific contributions by other personsor institutions such as libraries and research foundations. Acknowledgements should beexpressed simply, tastefully, and tactfully.

ABSTRACT:Brief explanation what you have done in the projectDonts - Should not contain any implementation details, and in-depth technical details- Should not contain the details like demerits/disadvantages, limitations- Should not contain the details of the hardware/software used- Size should not exceed 150 words or 10 lines

LIST OF TABLES:- List of all tables with page no

LIST OF FIGURES:- List of all figures with page no- All figures should be labeled- All figures should be referred in text. i.e. explanation for each figure should be given

ACRONYMS:- List all the acronyms that you have used inside your report. If the acronym is relativelynew add it here and also explain it in the glossary. The list should be alphabeticallysorted.FMEA Failure Mode Effect AnalysisPHA Preliminary Hazard Analysis

INTRODUCTION: This includes the basic terms and definitions. The subheadings may be appropriate places for covering the topic under consideration. Suitable examples may be given for better understanding. The figures and tables may be included for proper representation of the topic

OBJECTIVE AND SCOPE: This should give a clear picture of the project. Objectiveshould be clearly specified. What way the project is going to contribute in the technicalfield has to be mentioned.

REQUIREMENT ANALYSIS:-

1. use questionnaires interview, group discussion etc

METHODOLOGY:

7/28/2019 Industrial Training Report Submission Guidelines for engineering students

3/6

(Flow chart /ER-diagram or Algorithm implemented) The write -up must include the Methodology for the project work. It end with theconcluding remarks-briefly describing innovation in the approach for implementing theProject, main achievements and also any other important feature that makes the systemstand out from the rest.

HARDWARE & SOFTWARE used: The requirement of the resources for designingand developing the proposed system must be given. The resources might be in form of the hardware/software or the data from the industry. The limitation of the proposedsystem in respect of a larger and comprehensive system must be given.

2. Project Design :-

a) Design Overview- explain the software methodology used to design- provide your project description wherever, if necessary

b) Design Approach- explain about two possible design and organization of modules- explain each design with neat sketchc) Design Selection- Choose the best among the two designs from design approach and justify the selection.i.e. explain which design you are going to implementd) Design DescriptionDescribe your design process using- Class diagram- Sequence diagram-Data flow diagram-State diagram- Activity diagram

7/28/2019 Industrial Training Report Submission Guidelines for engineering students

4/6

- Sequence diagram

State diagram

7/28/2019 Industrial Training Report Submission Guidelines for engineering students

5/6

Activity diagram

7/28/2019 Industrial Training Report Submission Guidelines for engineering students

6/6

BIBLIOGRAPY: (EXAMPLE)

1. D.L. Carney, J.I. Cochrane, The 5ESS Switching System: Architectural Overview, AT&T Technical Journal , vol. 64 , no. 6 , July-August 1985, pp. 1339-1356.

2. A. Stevens, C++ Database Development , MIS Press, New York, 1992, p. 34.3. J. Martin, Computer Data-base Organization , Prentice -Hall, Englewood Cliffs, NJ,1977, p. 53.4. www. Ibm.com/in5. www.intel.com/india

Appendix

Coding listing:Coding Font size: 10, Courier New, Normal

Page No should be included in the center.

Documents to be carried with you at the time of Presentationfor Six Month Industrial Training Presentation/Viva

1) Two hard bound training reports as per the given guidelines(Color of the outer cover must be BLACK)

2) One CD attached with each report.3) Daily diary properly signed by your supervisor.4) 6 month Industrial training evaluation form.5) Prepared power point presentation with you.

No r eport wi ll be accepted if not submitted in the specif ied format.H ence all students on training are advised to str ictl y fol low the specif ied f ormat given above.