Industrial Pressure Gauges - R.S.A. Automationrsaautomation.com/pdf/guages/HGuruSouth-Industrial...
Transcript of Industrial Pressure Gauges - R.S.A. Automationrsaautomation.com/pdf/guages/HGuruSouth-Industrial...
IndustrialPressure Gauges
HGuruSouthHGuruSouth
Industrial Pressure Gauges:
Standard Range:
H.Guru South 'Industrial Pressure Gauges' are suitable for all general industrial applications. They are robust in their construction and are ideal for field applications. These gauges come with bourdon tube sensing elements. They have guaranteed initial accuracy and repeatability. The accuracy is maintained longer, a result of a sound design and fabrication of all the critical components, in house. The design incorporates a blow out disc in order to maintain safety. These gauges are available with material and calibration certificates. Performance is as per IS 3624-1987. They are available in a variety of casing options to suite most environments and applications.
Technical Specifications:Dial Sizes: 100mm, 150mm, 200mm, 250mm, 300mmAccuracy (10~90% of scale): +/- 1% FSDStandard Ranges: Refer Table PGI-1Working Pressure: 10 ~ 70% of Scale (Steady Pressure) 10 ~ 50% of Scale (Fluctuating Pressure)Over Pressure Protection:
2 2 230% of scale up to 60Kg/cm ; 25% of scale up to 100Kg/cm ;15% of scale above 100Kg/cm 0 0Operating Temperature: -29 C ~ 270 C
0 0Ambient Temperature: -25 C ~ 65 C0Temperature Error: (Reference Temperature = 25 C)
0+0.3% of scale for every 10 C increase from reference temperature.0- 0.3% of scale for every 10 C decrease from reference temperature.
Sensing Element: Bourdon TubeElement Materials: SS316, MonelsMovement: SS304, BrassConnection Material: SS316, MonelsStandard Connections: Refer Table PGI-2Casing Options: Cast Aluminum LM6 Alloy, Stainless Steel with blow out disc. (Refer Table PGI-3 for details) Dial: Aluminum matte white finish with black lettering. Pointer: Black finished Aluminum micro adjustable.Window Options: Glass, Shatter proof glass, Toughened glass, Acrylic.Weather Protections: IP55, IP65.Mounting Options: Refer Table PGI-4Approximate Weight: Refer Table PGI-5
Optional Extras: Electric Contacts (DS 100mm & 150mm) (Accuracy +/-1.5%) Drag Pointer** Material Options Cleaning for Oxygen, Acetylene, or other special services. Special Ranges & Scales : PSI, MPa, KPa etc. Custom made Dials with special markings. Applicable Accessories
IPG-2
HGuruSouth
** This red pointer (shown here in grey) shows the maximum value attained since the pointer was last reset. They are engaged by a small pin on this pointer. If this pointer is omitted, this pointer becomes an index pointer, which acts as a guide to the plant attendant. This pointer assembly is mounted on an acrylic plastic window adjustable from front, by using a screw driver through an adjustable screw.
These gauges are typically used in very harsh and highly corrosive environments. They are used in chemical, fertilizer and petrochemical industries due to their tolerance to the corrosive environments that such industries offer.
Additional Technical Specifications:Dial Sizes: 150mm
0 0Operating Temperature: -29 C ~ 150 CCase: Phenolic*All Other Specifications as in Standard Range.
Note: Industrial Type is suitable for corrosive environments where the fluid medium does not clog the connection or the element, or corrode the wetted parts. Please refer the corrosion chart provided in this section. Please ascertain the suitability of material to the specific application.
Phenolic Case Pressure Gauge:
Ordering Procedure: Computer Code Construction (See Table PGI-6 for details)*Please indicate additional specifications separately.
1 2 3
4 5
6
8
P
7
Table PGI-6: Ordering Procedure
1 2 3 4 5 6 7
Dial Size Type Element Mat Movement Conn. Mat Case Entry-Mounting Accessories
04=100mm I= Industrial S=SS316 S=SS304 S=SS316 A=Al Alloy 1= Bottom - Surface Please Refer
06=150mm S= Solid Front M=Monel N=Brass M=Monel S=SS 2= Bottom - Direct Accessory Section
5= Back - Flush Panel
6= Back - Direct
8
12= 300mm
08= 200mm P= Phenolic
10= 250mm
7= Bottom - Pipe
HGuruSouth
Mini Range:
The Mini range of industrial pressure gauges essentially includes the small dial size range of gauges suitable forgeneral industrial applications.
Technical Specifications:Dial Sizes: 50mm, 63mmAccuracy (10~90% of scale): +/- 1.5% FSDStandard Ranges: Refer Table PGI-1Working Range: 10 ~ 70% of Scale (Steady Pressure) 10 ~ 50% of Scale (Fluctuating Pressure)Sensing Element: Bourdon TubeElement Materials: SS316Movements: SS304, BrassConnection Material: SS316Standard Connections: Refer Table PGI-2Casing Options: Cast Aluminum LM6 Alloy, Stainless Steel (Refer Table PGI-3 for details) Dial: Aluminum matte white finish with black lettering. Pointer: Black finished Aluminum nonadjustable.Window Options: Glass, Shatter proof glass, Toughened glass, Acrylic.Weather Protections: IP55, IP65.Mounting Options: Refer Table PGI-4Approximate Weight: Refer Table PGI-5
*All other specifications as in Standard Range
Optional Extras: Cleaning for Oxygen, Acetylene, or other special services. Special Ranges & Scales : PSI, MPa, KPa etc. Custom made Dials with special markings. Applicable Accessories
Ordering Procedure: Computer Code Construction (See Table PGI-8 for details)*Please indicate additional specifications separately.
Table PGI-8: Ordering Procedure (Mini Range)
1 2 3 4 5 6 7
Dial Size Element Mat Movement Conn. Mat Case Entry-Mounting Accessories
02=50mm S=SS316 S=SS304 S=SS316 A=Al Alloy 1= Bottom - Surface Please Refer
03=63mm M=Monel N=Brass M=Monel S=SS 2= Bottom - Direct Accessory Section
5= Back - Flush Panel
6= Back - Direct
12
3
4 5
6 7
P I
IPG-4
HGuruSouth
Solid Front Industrial Pressure Gauge:
Solid Front Pressure Gauges are high safety gauges used in process industryapplications. These essentially have a shield behind the window of the gauge to prevent any shock created within the gauge from shattering the window. These gauges also incorporate a safety back with blow out discs to vent the pressure through the back, in the event of an internal failure. These gauges are ideally suited for applications where the risk of explosion of the pressure system is existent.
Additional Technical Specifications:Dial Sizes: 150mmAccuracy (10~90% of scale): +/- 1% FSDCasing Options: Cast Aluminum LM6 Alloy, SS (Refer Table PGI-3 for details) *All Other Specifications as in Standard Range.
Optional Extras: Drag Pointer** Cleaning for Oxygen, Acetylene, or other special services. Special Ranges & Scales : PSI, MPa, KPa etc. Custom made Dials with special markings. Applicable Accessories
*Computer Code Construction as in Standard Range.
Liquid Filled Pressure Gauges:
Liquid filled gauges are used in applications which involve high mechanical vibration and pulsating pressure. The sensing element, movement and pointer are kept immersed in a liquid which dampens their motion and lengthens their life. These instruments are designed for use on power units, pumps, hydro cleaning machines, compressors, turbines, diesel engines, chemical lines and refrigerating plants and machines and equipment. *Caution: To avoid possibility of explosion, gauges with glycerine filling should not be used to measure O , Cl, HNO , H O , NH and other strong oxidizing 2 3 2 2 3
agents. The use of fluronate fluid filling is recommended for such applications.
Technical Specifications:Dial Sizes: 63mm, 100mm, 150mmAccuracy (10~90% of scale): +/- 1% FSD, +/-1.5% FSD (DS 63mm)Standard Ranges: Refer Table PGI-1Working Pressure: 10 ~ 70% of Scale (Steady Pressure) 10 ~ 50% of Scale (Fluctuating Pressure)Over Pressure Protection: (Short Duration Only)
2 2 230% of scale up to 60Kg/cm ; 25% of scale up to 100Kg/cm ;15% of scale above 100Kg/cm 0 0 0 0Operating Temperature: -29 C ~ 65 C (Glycerine filling), -29 C ~ 150 C (for Silicone filling)
Sensing Element: Bourdon TubeWeather Protections: IP55, IP65.Mounting Options: Refer Table PGI-4Approximate Weight: Refer Table PGI-5*All Other Specifications As In Standard Range*Electric Contacts Are Not Applicable
Accessory Codes For Liquid Filling: (Please mention this code in place provided for accessory code) Glycerine Filling: GF Silicone Filling: SF Fluronate Filling: FF
IPG-5
HGuruSouth
2Kg/cm Bar mm Hg
0 ~ 0.6
0 ~ 1
-
Table PGI-1 : Standard Ranges
0 ~ 0.6
0 ~ 1
0 ~ 1.6
0 ~ 2.5
0 ~ 1.6
0 ~ 2.5
0 ~ 4
0 ~ 6
0 ~ 7
0 ~ 10
0 ~ 16
0 ~ 21
0 ~ 25
0 ~ 40
0 ~ 60
0 ~ 100
0 ~ 160
0 ~ 250
0 ~ 400
0 ~ 600
0 ~ 1000
-1 ~ 0
-1 ~ 0.6
-1 ~ 1
-1 ~ 1.5
-1 ~ 3
-1 ~ 5
-1 ~ 6
-1 ~ 9
-1 ~ 15
0 ~ 4
0 ~ 6
0 ~ 7
0 ~ 10
0 ~ 16
0 ~ 21
0 ~ 25
0 ~ 40
0 ~ 60
0 ~ 100
0 ~ 160
0 ~ 250
0 ~ 400
0 ~ 600
0 ~ 1000
-1 ~ 0
-1 ~ 0.6
-1 ~ 1
-1 ~ 1.5
-1 ~ 3
-1 ~ 5
-1 ~ 6
-1 ~ 9
-1 ~ 15
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-760 ~ 0
-
-
-
-
-
-
-
-
Table PGI-2: Standard Process Connections
Dial Size 50mm 63mm 100mm 150mm 200mm 250mm 300mm
Connection
1/2"NPTM - - * * * * *
1/2"BSPM
M20*1.5 M
M18*1.5 M
3/8"NPTM
3/8"BSPM
3/8"NPTF
3/8"BSPF
1/4"NPTM
1/4"BSPM
1/4"NPTF
1/4"BSPF
1/8"NPTM
1/8"BSPM
1/8"NPTF
1/8"BSPF
- - * * * * *
- - * * * * *
- - * * * * *
- - * * * * *
- - * * * * *
- - * * * * *
- - * * * * *
* * * * *
* * * * *
- - * * * * *
- - * * * * *
* * * * *
* * * * *
- - * * * * *
- - * * * * *
*
*
*
*
*
*
*
*
Table PGI-3: Case Dimensions - Case Size / Material
Material Cast Aluminum LM6 Stainless Steel
Enamel Epoxy SS1 SS2
Dial Size
50mm - - * -
63mm
100mm
150mm
200mm
250mm
300mm
* *
* *
* *
* *
* *
* *
*
*
*
*
*
-
- -
- -
- - Table PGI-4 - Induatrial Pressure
Gauges Mounting Options
Bottom Entry - Surface Mounting
Bottom Entry - Direct Mounting
Applicable Dial Sizes
Applicable Dial Sizes
50
Applicable Dial Sizes
50 63 100 150 200 250 300 100
63 100 150 200 250 300
Bottom Entry - Pipe Mounting
Applicable Dial Sizes
Back Entry - Panel Mounting
10063
150 200 250 300
Applicable Dial Sizes
150 200
Back Entry - Direct Mounting
50 63 100 150 200 250 300
HGuruSouth
Ap
plica
ble
Fo
r Min
i Ra
ng
e A
lso
Table PGI-3Cast Al LM6 Alloy Case
DIAL SIZE
øA
øB
300 332.5
250 282.5
324.5 310.0
274.5 259.5
60.5 276.560.5 276.5
342
291.5
63 78.5 75 67.5
200
150
226.5
178.5
100 128.5
217.5
170.5
204.5
157.5
120.5 106.5
A B C
41.5 76 98
60
59.5218.5
172.550.5 122.5
238
191.5
141.5
H X F
47.0 134.5
154.0150
100 97.0
49.0152.0
96.5
190
63 66.0
50 53
29.064.0
51.5 31
75
63
PCD of Fixing Holes For Surface Mounting
H
øA øB
-0.0
+0
.5
-0.0
+0
.5
øC
-0.0
+0
.5
-0.0+0.2
øF
+/-0.5 øF
+0
.5-0
.0
+0
.5-0
.0
H+0.2-0.0
+/-0.5
Stainless Steel (SS1) Case
øA
øB
100
150
99.5116.0
174.0 153.0
101
51 154.5
47.5 137
190.5
PCD of Fixing Holes For Surface Mounting
H+0.2
-0.0
+0
.5
+0
.5-0
.0
-0.0
Stainless Steel (SS2) Case
øF+/-0.5
-1.0+0.0
X
Cut Out For Panel Mounting
-1.0+0.0
X
Cut Out For Panel Mounting
DIAL SIZE H FA B DIAL SIZE A B H X F
PCD of Fixing Holes(Surface Mounting)
All Dimensions are in mm All Dimensions are in mm All Dimensions are in mm
IPG-6
Corrosion Chart:
IPG-7
HGuruSouth
Over 70 Bar — entire system must be 316 stainless steel.I
Monel, Bronze and 316 stainless steel and acceptable for oxygen service, providedthe instrument has been cleaned for oxygen service and is free from oil.
2
O* Below 38 C / O100 F
** Any standard bourdon tube material may be used in conjunction with adiaphragm seal, but the gauge selection should take into consideration the corrosiveenvironment in which it is to operate.
HGuruSouth
Pressure InstrumentMaterial
Bra
ss o
r B
ron
ze
AIS
I S
S3
04
AIS
I S
S3
16
Mo
ne
l
Ch
em
ica
l Se
als
**
Acetone*
Acetic Acid <40%
Acetic Anhydride
Acetylene (Dry)
Acrolein 100%
Air
Alcohol, Ethyl
Alum. Chloride > 10%
Alum. Sulfate 10~50%
Ammonia Gas (Dry)
Ammonium Choride <40%
Ammonium Nitrate <50%
Ammonium Sulfate <60%
Aniline>99%
Argon
Beer
Benzidine >99%
Benzene <50%
Benzoic Acid <70%
Boric Acid <25%
Bromine (Dry)
Butane
Butyric Acid <10%
Calcium Chloride <80%
Calcium Hydroxide <50%
Carbon Dioxide
Carbon Monoxide >99%
Chlorine (Dry)
Chlorine (Moist)*
Chloroform (Dry)
Chromic Acid
Citric Acid 10-50%
Com Oil
MediaApplication
Pressure InstrumentMaterial
Bra
ss o
r B
ron
ze
AIS
I S
S3
04
AIS
I S
S3
16
Mo
ne
l
Ch
em
ica
l Se
als
**
Crude Oil (Sour)
Crude Oil (Sweet)
Ethyl Acetate
Ethylene Oxide >99%*
Ferric Chloride <40%
Ferric Sulfate <10%*
Ferrous Chloride <30%
Ferrous Sulfate <50%
Fluorine Gas (Dry)
Formaldehyde <95%
Formic Acid*
Freons
Furfural <10%
Gasoline (Fleming)
Glycerin >99%
Hydrobromic Acid
Hydrochloric Acid
Hydrofluoric Acid
Hydrogen
Hydrogen Peroxide <50%
Kerosene
Lactic Acid <70%*
Magnesium Chloride <40%
Mercury >99%
Milk
Naphtha >99%
Naphthalene >99%
Nickel Chloride >99%
Nitric Acid <95%*
Nitrogen
Oleic Acid
Oxalic Acid*
MediaApplication
I
Hydrofluosilic Acid
Pressure InstrumentMaterial
Bra
ss o
r B
ron
ze
AIS
I S
S3
04
AIS
I S
S3
16
Mo
ne
l
Ch
em
ica
l Se
als
**
Oxygen (Gas)
Palmitic Acid >99%*
Phosphoric Acid <80%
Picric Acid <10%
Propane (Dry)
Sea Water (Flowing)
Silver Nitrate <70%
Sodium Bicarbonate <20%
Sodium Bisulfate <30%
Sodium Carbonate <40%
Sodium Chromate <60%
Sodium Cyanide*
Sodium Hydroxide <40%
Sodium Hypochlorite <25%
Sodium Phosphate, Tri <60%
Sodium Silicate <50%
Sodium Sulfide <50%
Stannous Chloride <10%
Steam (Use siphon)
Stearic Acid
Sulfur Dioxide (Dry) >99%
Sulfur Trioxide (Dry) >99%
Sulfuric Acid
Tannic Acid <80%
Tartatic Acid <50%
Tin Chloride (ous) <10%
Toluene >99%
Turpentine >98%
Water (Tap)
Whiskey
Zinc Chloride <25%*
Zinc Sulphate <40%
MediaApplication
2
This corrosion chart has been prepared to assist you in the selection of materials that is suitable to your application.It is essential that the wetted parts of the instruments be compatible with the process fluid. To use the chart below,locate the fluid whose pressure is to be measured and select a material, from the compatible materials, which are indicated by a dot. The below data has been extracted from various sources and the general assumption is that the
Oprocess fluid is at a temperature below 80 C except where specified. However, final selection of material is recommended to be made only after verifying the same with qualified personnel.
H.Guru Instruments (South India) P. Ltd.,# 32, Industrial Suburb, Yeshwantapur PO,Bangalore-560 022, India.Phone : *91-80-23370300, 23370476, 23379568Fax : *91-80-23379890 Online : www.hgurusouth.comemail : [email protected], [email protected]
Our Products
HGuruSouth
* Due to continuous improvement, specifications mentioned, or products, may be altered or discontinued without prior notice.
Industrial Pressure GaugesTest Pressure GaugesPrecision Pressure GaugesChemical Seal Pressure GaugesDifferential Pressure GaugesDiaphragm Pressure GaugesLow Pressure Capsule GaugesContact Type Pressure GaugesPressure SwitchesUtility Pressure GaugesReceiver GaugesAbsolute Pressure GaugesPressure & Temperature GaugesMercury-In-Steel ThermometersBi-Metal ThermometersGas Actuated ThermometersVapour Pressure ThermometersTemperature SwitchesContact Type ThermometersComponents & Accessories
HGuruSouthTM: Trademark(s) of H.Guru Instruments (South India) P. Ltd., Bangalore.
SensoTM TMTM
An ISO 9001 Company