Industrial Pipe & Valve Marking Solutions

Pharmaceutical sChemicalsOil & Gas s

Food & BeverageManufacturing Marine

Offshore

www.benmark.com.sg

Oil & Gas Petrochemical Power Renewable Energy Ship Building Building Services

Pipe Marking BriefBENMARK Benefits®

Why choose BENMARK for your Pipe Marking projects?

BENMARK high performance marking products provide extended service temperature range, strong chemical resistance, seawaterabil-ity and long life span, making them the solution of choice for industrial, offshore and harsh environments around the region.

BENMARK markers and tags are fully customizable: legends, design, colors, size, to fullfill your specific environment, industry, regional and end-user rules, practices and specifications, including full compliance with ASME/ISO/NBR/GHS standards. Standard that use color matching options (RAL, British Standard and Pantone Standard).

BENMARK markers and tags are manufactured “on-demand” in our Singapore facilities. We offer the shortest leadtime and most competitive value in the market to satisfy your critical deadline and budget targets.

Pipe Marking Role & Importance

In the face of increasing regulations, more complex piping systems

and shorter time to market, the “good old ways” of marking pipes

with paint or stencils and manual labelling of blank valve tags are

not appropriate anymore.

Pipe Marking Benefits

Adequate pipe marking allow quick identification of pipes content and valves function using relevant color code and legends.

Correctly defined and installed pipe markers and valve tags increase safety, facilitate maintenance and minimize downtime while simplifying commissioning and ensuring regulatory compliance.

2

Pip

e M

ark

ing

: Usa

ges

Your Choice of Materials BENMARK Pipe Marking®

Pipe Markers

All BENMARK Pipe markers are self-securing and overlaminated to protect the colors and legends. Available as wrap-around, half-wrap or single labels for pipe up to 40” diameter.

We offer the following choice of materials to match your requirements :

O-XG SeriesExtended temperature range vinyl markers with long outdoor durability and ease of in-stallation on flat and single curved surfaces.

Recommended for harsh environment with strong direct sunlight and chemical solvent exposure.

WP SeriesHigh-grade, low halogen, fully wrap around, polyester markers with self-securing sealed in place adhesive strip for easy installa-tion/maintenance on a wide range of pipe diameters.

Recommended when higher temperature range is required or when use of vinyl material is prohibited.

Valve Tags

Perfect complement to our Pipe markers, BENMARK valve tags allow quick identification of valves and equipments and their function with their customizable content. Installation using your choice of stainless steel “S” hooks or beaded chains with connector.

Our valve Tags come in three variants:

Overprinted Acrylic TagsCustom shape and size, single or double- sided, unlimited color and artwork. Recommended when wide range of color and texts is required.

Laser Engraved ABSCustom shape and size, single sided.

Legends engraved on laserable dual color ABS plastic, with the following combinations:

Engraveable ABS Tags, Color Combinations

Stainless steelBlack marked legends on SS304/SS316. Available in various sizes. When maximum durability is required.

BLACK BLACK BLACK BLACKHairline silver

WHITE

BLACKHairline gold

WHITE WHITE WHITE

3

Pip

e M

ark

ing

: Pro

duc

t Offe

ring

MV-WWT-553CAQUEOUS WASTE

MV-SM#2-555ASOLVENT WASTE (PTFE PIPE)

��

Safety Signs,Materia ls

BENMARK safety signs are build with our Safety stickers, described opposite page, premounted on the following materials according to customer requirements:

Aluminum 2mm Front Outdoor permanent use

Twin-wall PC 5mm Front Medium term wide sign outdoor

Acrylic 3mm Reverse Better appearance, both indoor and outdoor but subject to therma l expansion

Safety Signs, Dimensions and designs

BenMark safety signs come with a maximum size of:- 4’ x 8’ [aluminum , acrylic]- 6m x 1.9m [Twin-Wall PC].

Design according to customer provided artwork, either in vector form or a s high-resolution pictures.

fety Sigfety Signs,teria ls

4

Com

ple

men

tary

Pro

duc

ts: S

afe

ty S

igns

Material Thickness Mount Usage

Safety Signs Specifications

Pipe Marking Compliance Which Standard ?

BENMARK Pipe marking products are designed to comply to the rules, practices and regulations of your industry.

Compliance

For Marine & Offshore: ISO 14726:2008*, NBR6493 [Brazil] For Industrial Installation: ASME 13.1-2007*For Chemical & Pharmaceutical Plants, GHS Rev 5*/SS586

Custom & Compliant Design

While regulated by standards, most of the projects require specific legends, P&ID line number, etc. in one or more languages.

Based on your requirements, we will apply our knowledge on the differences often ambiguous and conflicting international standards, to propose pipe markers dimensions, legends and design that suit your needs.

Our proprietary BENMARK label generator software ensure efficient creation of pipe markers artwork matching your requirements for your review: with or without directional arrows, uni-directional or bidirectional, mono or bilingual texts while complying with the standard of your choice, including color coding and sizing.

BENMARK pipe markers “on-demand” manufacturing process, with integrated color proofing matching, provide short deadline even for small quantity and custom designs.

Pip

e M

ark

ing

: Co

mp

lianc

e

*See following pages dedicated to each of these standards

5

Pip

e M

ark

ing

: Sta

nda

rds

Com

pa

rison

4

Element of Specifications ISO 14726:2008 ASME A13.1-2007 GHS REV 5 SS586

Legend Recommended Mandatory Mandatory

Text Dimensions NS Marker width and letter size specified based on pipe diameter

Text + GHS Symbols

Language Use language understood by crew members

English [US] {Implicit} Use language understood by local staff

Directional Arrows Recommended Strongly Recommended Strongly Recommended

Arrows Size, color etc NS NS NS

Color Coding Specified Specified Specified

Latest standard use two colors, main color [ex: Blue for Fresh Water] on the outside for media type and second color inside to differentiate, ex Fire Fighting Water re: Fire Fighting Foam

10 colors defined with related legend color, ex: Water: Green Fire: Red Air: Blue

Colors + Colored Symbols

Marker Size NS Specified Specified

Width Width not specified, but visibility and main color area > additional color area. Standard practices are either to follow ASME or for the pipe marker to be at least 300mm.

Marker width specified based on pipe diameter, ranging from 8"(200mm) up to 32"(800mm), marker to be installed so as to be visible from operator position

NS

Wrap-around Mandatory for pipe up to 8" OD, at least half of circumference for pipe OD > 8"

NS NS

Location Specified Specified Specified

Guidelines

- once in each room;- at each penetration point [bulkhead, walls, decks]; - close to each valve; - within a distance of 3m to 5m , may require more frequent marking due to pipe bends or close proximity of different pipes

- close to valves, flanges;- adjacent to changes in direction, branches and in/out of walls/floors; - at intervals on straight pipe runs sufficient for identification

NS

Pipe Marking Standards, Comparison

6

Marine & Offshore Applications

Pipes identification on ships and offshore installations is considered as one of the most important when it comes to the safety of employees and to the proper operation and maintenance of connected machines and equipments.

Introduction to ISO 14726:2008

Also referred as “Ships & Marine Technology - Identification Colors for the content of Piping Systems”.

This standard provides strong guidelines for the design of pipe markers and for theirlocation, while leaving enough flexibility for customization of labels, shapes and languages used to fit each specific situation.

ISO 14726:2008 Color coding

Since its 2008 revision, ISO 14726 recommends using a dual color code, with the main color, surrounding the marker and specifying the medium group, while the secondary inner color is used to differentiate the specific medium.

BENMARK pipe markers are fully compliant with ISO 14726:2008 and are available for full wrap-up of pipe up to 40” diameter.

BENMARK pipe markers WP Series ISO 14726 compliant

Custom Design

6

Marine & OffshoreApplications

Pipe Markers, Marine & Offshore Applications

Pipes identification on ships and offshore installations is of the utmost importance to the safety of employees and to the proper operation and maintenance of connected machines and equipments.

Introduction to ISO 14726:2008

Also referred as “Ships & Marine Technology - Identification Colours for the content of Piping Systems”.

This standard provides strong guidelines for the design of pipe markers and for their location, while leaving enough flexibility for customization of labels, shapes and languages used so as to fit each specific situation.

ISO 14726:2008 Colour coding

Since its 2008 revision, ISO 14726 recommends using a dual colour code*, with the main colour, surrounding the marker and specifying the medium group, while the secondary inner color is used to differentiate the specific medium.

BENMARK pipe markers are fully compliant with ISO 14726:2008 and are available for full wrap-up of pipe up to 24” diameter

ISO-14726 Main Colors, *see opposite page for dual-color examples

BenMark Pipe Marker VP SeriesISO 14726 compliant

Custom Design

Pipe M

arking: M

arin

e &

Offs

hore

Code Color Sample Medium Subpart#

BK Black BK Waste Media K

BU Blue BU Fresh Water B

BN Brown BN Fuel N

GN Green GN Sea Water G

GY Grey GY Non-flammable gases E

MN Maroon MN Air and sounding Pipes M

OG Orange OG Oil other than fuel O

SR Silver SR Steam S

RD Red RD Fire fighting R

VT Violet VT Acids, alkalis V

WH White WH Air in vent system W

YE Yellow YE Flammable gas Y

*Single color marking is still supported while not recommended.*Single color marking is still supported while not recommended.

ISO-14726 Main Colors. * see next page for dual-color examples

Pip

e M

ark

ing

: Ma

rine

& O

ffsho

re

7

7

Pipe Markers, Marine & Offshore Applications

ISO 14726-2008 Dual Color Coding

Waste Media

Black water

Waste oil

Bilge water

Exhaust gas

Grey water

Sewage

Sea water

Decontamination water

Sea water

Ballast water

Cooling sea water

Oils others than fuels

Thermal fluid

Lube oil gas turbines

Hydraulic fluid

Lube oil steam turbines

Lube oil gears

Lube oil engines

Steam

Steam for Heating

Driving steam

Exhaust steam

Supply steam

Flammable gases

Hydrogen

Acetylene

Liquid gas

Fire Fighting

Fire-fighting water

Fire-fighting gas

Sprinkler water

Spray water

Fire-fighting powder

Fire-fighting foam

Fresh Water

Sanitary

Potable water

Distillate

Gas-turbine water

Feed water

Cooling fresh water

Chilled water

Condesate

Non-flammable gases

Oxygen

Inert gas

Nitrogen

Refrigerant

Compressed air LP

Compressed air HP

Control air

Breathing air

Breathing gas

Air and sounding pipes

Waste media

Fresh water

Fuel

Sea water

Non-flammable

Oil

Steam

Fire fighting

Acids, alkalis

Vent

Flammable

Air in ventilation systems

Discharge air

Supply air, cold

Exhaust air

Atmospheric air

Exhaust air

Decontaminated air

Recirculated air

Supply air, warm

Smoke clearance

Conditioned air

Natural supply air

* Arrows are not mandatory, they are displayed here for reference** Actual legend to be specified by customer, in upper case*** Area of outer color > area of inner color

Pipe

Mar

king

: ISO

147

26:2

008

Colo

rs

Pip

e M

ark

ing

: IS

O 1

4726

:200

8 C

olo

rsPipe Markers, Marine & Offshore Applications

8

8

Oil & Gas Applications

Introduction to ASME 13.1

ANSI originally an American standard, later adopted in many countries either as ANSI standard or with minor variations, ASME 13.1 defines in very practical ways how pipe should be marked: legend and marker sizes, suggested font, color coding, and guidelines on where to install such mark-ers.

Primary Color Coding for ASME A13.1

 

 8 

   

Marker size per ASME A13.1/ANSI

 

 8 

   

BENMARK pipe markers are fully compliant with ASME 13.1/ANSI and are available for full wrap-up of pipe up to 40” diameter.

8”

12”

8” 8”

12”

12”

12” 24” 24”

32”

Pip

e M

ark

ing

: Oil

& G

as

BENMARK Pipe Marker ASME compliant

Single/Dual Language

9

Chemical & Pharmaceutical Applications

GHS Rev 5 Specifications

Most countries have adopted GHS Rev 5 as part of their standard framework for labelling of storage and transport of hazardous substances.

More specifically, rule 1.4.10.5.5.1 “Workplace labelling” explicity states that GHS labels should be applied to “piping systems including valves” and that such installations should ensure clear hazard communication through the “use of displays with GHS symbols, color and signal words in piping systems and processing equipments”.

GHS Pipe markers Design

Pipe markers design specifications are based on a combination of pictograms, colors, signal words and rules on how to apply and combine these.

With the advent of mixtures, each situation and its related set of markers has become very specific and close to unique.

BENMARK pipe marker generator software allow us to quickly generate your GHS specific labels. Combined with BENMARK “on-demand” manufacturing, we can deliver in record time hundreds of differents GHS compliant pipe markers to fulfill your requirements.

9

Pipe

Marking: Che

mical &

Pha

rmace

utical

GHS Rev 5 Specifications

Most countries* have adopted GHS Rev 5 as part of their standard framework for labelling of storage and transport of hazardous sustances.

More specificaly, rule 1.4.10.5.5.1 “Workplace labelling” explicity states that GHS labels should be applied to “piping systems including valves” and that such installations should ensure clear hazard communication through the “use of displays with GHS symbols, colour and signal words in piping systems and processing equipments”.

GHS Pipe markers Design

Pipe markers design specifications are based on a combination of pictograms, colours, signal words and rules on how to apply and combine these.

With the advent of mixtures, each situation and its related set of markers has become very specific and close to unique.

BENMARK pipe marker generator software allow us to quickly generate your GHS specific labels. Combined with BENMARK “on-demand” manufacturing, we can deliver in record time hundreds of differents GHS compliant pipe markers to fullfil your requirements.

ApplicationsChemical & Pharmaceutical

BenMark Valve TagDouble-Sided

Custom Design

BenMark Pipe MarkerGHS Rev 5 compliant

*GHS Rev 5 is the basis of Singapore SS586, part 1-3 : 2008. The implementation of this standard is now completed, with the mandatory marking of all hazardous substances, including mixtures effective as of July 1st 2016.

10

Pip

e M

ark

ing

: C

hem

ica

l & P

harm

ace

utic

al

9

Pipe

Marking: Che

mical &

Pha

rmace

utical

GHS Rev 5 Specifications

Most countries* have adopted GHS Rev 5 as part of their standard framework for labelling of storage and transport of hazardous sustances.

More specificaly, rule 1.4.10.5.5.1 “Workplace labelling” explicity states that GHS labels should be applied to “piping systems including valves” and that such installations should ensure clear hazard communication through the “use of displays with GHS symbols, colour and signal words in piping systems and processing equipments”.

GHS Pipe markers Design

Pipe markers design specifications are based on a combination of pictograms, colours, signal words and rules on how to apply and combine these.

With the advent of mixtures, each situation and its related set of markers has become very specific and close to unique.

BENMARK pipe marker generator software allow us to quickly generate your GHS specific labels. Combined with BENMARK “on-demand” manufacturing, we can deliver in record time hundreds of differents GHS compliant pipe markers to fullfil your requirements.

ApplicationsChemical & Pharmaceutical

BenMark Valve TagDouble-Sided

Custom Design

BenMark Pipe MarkerGHS Rev 5 compliant

*GHS Rev 5 is the basis of Singapore SS586, part 1-3 : 2008. The implementation of this standard is now completed, with the mandatory marking of all hazardous substances, including mixtures effective as of July 1st 2016.

10

Pipe Markers Specifications

O- XG Series WP Series Thickness***- without backing - over lamination

100 microns 100 microns

150 microns 25 microns

Service Temperature range - 50˚C to +125˚C - 50˚C to +150 ˚C

Sea water resistance after 48h/23˚C no variation

Shelf life 2 years 2 years

Service life by specialist application 4 years 5 years

Marker Types

Single-Label: For closed spaces or indoor installations, half or full wrap stickers are sometimes either not practical nor economical. In such cases we recommend to use individual labels with optional wrap around arrow stripes.

Half-wrap: Where access or angle of visibility is limited, these markers cover half of the pipe diameter. They are an economical choice to be ISO 14726 compliant for pipe diameter above 8”.

Wrap-Around: With a two inch wrap-around surface, they fully cover the pipes and provide increased bonding due to the overlap. They are strongly recommended for marine and offshore, and are mandatory up to 8” pipe diameter in ISO 14726:2008.

Marker Materials & Structure All BENMARK pipe markers series are printed using eco friendly solvent inks for maximum outdoor durability, with the printed graphics between the substrate and the overlamination for maximum protection.

O-XG Series Self-adhesive PVC-based markers for marine, offshore and petrochemical plants:- Excellent resistance to chemical solvent and UV exposure - Tested service temperature range - 50˚C to +125˚C WP Series Self-securing low-halogen polyester-based markers for extremely harsh environments: - Customized to fully wrap-around, ergonomic designed with sealed in place adhesive strips on both ends for a range of pipe diameters- Low Halogen, UL 969 recognized components - Excellent resistance to chemical solvent and UV exposure - Tested service temperature range - 50˚C to +150˚C

Pip

e M

ark

ers

Spec

ifica

tions

11

Custom Design While we have a range of “standard” markers and valve tags for each supported standard, most of our customers opt for custom design, at no extra costs.

Pipe Markers In-house Services

11

Pipe M

arking: In

-hous

e S

ervic

es

Pipe MarkersIn-house Services

Custom DesignWhile we have a range of “standard” markers and valve tags for each supported standard, most of our customers opt for custom design, at no extra costs.

This allows them to add identification information and fit to their specific project requirements [languages, line ID, etc].

For such custom design, our proprietary marker generator software allows us to quickly submit Final Artwork for approval before proceeding for manufacturing.

In addition, on request, we will rush actual samples for your assessment.

Color ComplianceOur regular colors are compliants with standards requirements and we support RAL and British Standard colors.

Alternatively, we provide inhouse service to match provided color samples or Pantone code using industrial spectrophotometer.

Project Packaging ServiceBENMARK markers come as individual pieces, already cut to your pipe dimensions, while valve tags come with chosen attachments, thus simplifying installation

BENMARK marking products are packed according to your instructions [by part number, system, installation location, etc.], and are grouped in cartons with detailed labels of their content.

This, provided at no extra costs, save you time and enable efficient warehousing, thus reducing your total costs.

Installation ServicesShould you require installation, our approved installers will be pleased to conduct on-site assessment and define with you preferred scope of work.

This allows them to add identification information and fit to their specific project requirements [languages, line ID, etc]

For such custom design, our proprietary marker generator software allows us to quickly submit Final Artwork for approval before proceeding for manufacturing.

In addition, on request, we will rush actual samples for your assessment.

Color Compliance Our regular colors are compliants with standards requirements and we support RAL and British Standard colors.

Alternatively, we provide inhouse service to match provided color samples or Pantone code using industrial spectrophotometer.

11

Pipe M

arking: In

-hous

e S

ervic

es

Pipe MarkersIn-house Services

Custom DesignWhile we have a range of “standard” markers and valve tags for each supported standard, most of our customers opt for custom design, at no extra costs.

This allows them to add identification information and fit to their specific project requirements [languages, line ID, etc].

For such custom design, our proprietary marker generator software allows us to quickly submit Final Artwork for approval before proceeding for manufacturing.

In addition, on request, we will rush actual samples for your assessment.

Color ComplianceOur regular colors are compliants with standards requirements and we support RAL and British Standard colors.

Alternatively, we provide inhouse service to match provided color samples or Pantone code using industrial spectrophotometer.

Project Packaging ServiceBENMARK markers come as individual pieces, already cut to your pipe dimensions, while valve tags come with chosen attachments, thus simplifying installation

BENMARK marking products are packed according to your instructions [by part number, system, installation location, etc.], and are grouped in cartons with detailed labels of their content.

This, provided at no extra costs, save you time and enable efficient warehousing, thus reducing your total costs.

Installation ServicesShould you require installation, our approved installers will be pleased to conduct on-site assessment and define with you preferred scope of work.

Project Packaging Service BENMARK markers come as individual pieces, already cut to your pipe dimensions, while valve tags come with chosen attachments, thus simplifying installation.

BENMARK marking products are packed according to your instructions [by part number. system, installation locations, etc.] with detailed labels of their content.

This is provided at no extra costs, save you time and enable efficient warehousing, thus reducing your total costs.

Installation Services Should you require installation, our approved installers will be pleased to conduct on-site assessment and define your preferred scope of work.

Pip

e M

ark

ing

: In

-hou

se S

ervi

ces

12

BENMARK High Performance Aluminum pipe marker are designed with surface printed polyester applied Aluminum carrier that is able to with-stand extremely low and high temperature.

Description

• Matt Aluminum based (High Performance High Visibility) Polyester Laminated pipe markers supplied with aluminum carrier.

• Ideally use for isolating the heat of the pipe surface that will be affecting the printed legend.

• Providing easy site maintenance and replacement of pipe services.

• Can be used for both indoor and outdoor area that requires extremely low and high temperature providing UV, chemical solvent and abrasion resistance at all times.

• Available for the pipe size below O.D 6” (150mm) Size: 800mmW x 100mmH O.D 12” (300mm) onwards Size: 800mmW x 160mmH

• 5-8 Years average outdoor durability

Aluminum Pipe Marker

13

Applications

Alu

min

ium

Pip

e M

ark

er

Optional powder coated color available

™

BENMARK™ Pipe markers: Quick Installation Guide

• BenMark™pipe markers

• PPE (Personal Protective Equipment)

• Utility knife [aka pen knife)

• Masking tape

• Squeegee

Prepare your tools• Cloth or paper towels

• Isopropyl alcohol in spraycan

• Garbage bag [to collectrelease liner disposedduring installation]

Optional

• Determine the location where the pipe marker needto be installed [Refer to project specific compliancerules for details],

• Align the marker on the pipe, with the text parallel tothe pipe direction,

• Secure the marker at its center to the pipe usingmasking tape all across the marker. This creates ahinge allowing it to be applied one half at a time.

1. Align and secure your marker in place

• Carefully peel-off the release liner of the top part ofthe sticker while ensuring the marker stay in place,

• Cut the revealed liner straight with your pen-knifewhile being careful of not cutting the marker itself,

• Discard the cut piece of liner.

2. Peel and cut 1st half of backing liner

• Starting from the center line , press the marker downto the surface with your squeegee,

• Always begin in the center and rub out and awaytowards the edges, overlapping strokes to removeany air trapped. Continue until you have appliedfully the first half of the marker around the pipe,

• Remove the masking tape used to secure themarker in position.

3. Apply 1st half and remove securing tape

• Carefully peel the 2nd half of the marker from itsliner and discard the liner,

• Starting from the center line, press the marker downto the surface with your squeegee using sametechnique as in step 3 until you fully wrap-aroundthe pipe.

4. Apply 2nd half

• Keep your ready-to-install pipe markers away from any liquids and overspray

While cleaning and doing preparation work,put the pipe markers in a safe place to avoid damage. The backing paper will wrinkle if it gets wet and will be difficult to peel off.

• For best results, we recommend pipe surface temperature range during installation : 10°C (50°F) to 45°C (113°F)

Rule of thumb is for surface to feel from slightly cold to warm on touch. Outside this range, adhesive will be harder [cooler T°] or gummy [higher T°], hindering installation anddecreasing the ability for the glue to achieve its stated performance.

• The surface should be clean for good and long-term adhesion

If it’s not the case, wash with a degreaser,rinse off, dry with a clean towel or cloth, finish up the cleaning by wiping down the entire expected area with isopropyl alcohol. Toavoid recontamination during the final cleaning step, wipe in just one direction using a a clean, lint-free towel or cloth. Let the alcohol evaporate entirely before applying thepipe marker.

• Take your time and be careful during installation until you are confortable with the process

Pipe markers already installed cannot be peeled up and put down again if you wrinkle them during application. We are not responsible for graphics damaged during application.

General Recommendations

Installation Complete !

Before Installation

Installation Start

14

BENMARK™ Pipe markers: Quick Installation Guide

Pip

e M

ark

ers

: Qui

ck In

sta

llatio

n G

uid

e

BENMARK SINGAPORE PAST PROJECT REFERENCES

Sembcorp Marine Integrated Yard1) GHANA TEN FPSO DEVELOPMENT PROJECT 2) BUMIARMADA MADURA FPSO3) HELIX Q7000 WIS4) HELIX Q50005) FPSO OSX-36) FPSO CIDADE DE PARATY7) FPSO PIONEIRO DE Libra8) PETROBRAS P68 FPSO

- Dynamic Positioning Fall pipe – FLINSTONE- Dynamic Positioning Blue Water Research - Vessel – CSIRO RV INVESTIGATOR- GPS Intl - ENI Muara Bakau B.V. Project: Jangkrik FPU- BAKER Engineering – A3001 Lift Boat Project

Pharmaceutical Plant 1) PFIZER SINGAPORE 2) ABBVIE

15

Past

Pro

ject

Ref

eren

ces

Certificates

Benmark Singapore is recognized locally, as privately-held company who have contributed to economicdevelopment in Singapore and abroad.

Benmark Singapore is also recognized and awardedfor bizSAFE practice on the Workplace Safetycapabilities.

Benmark Singapore is ISO 9001:2015 and OHSAS18001:2007 Certified which provides a good qualityservice and meets the expectation of its customers,suppliers and the company itself.

©Benmark Singapore Pte >1

Certificates

Benmark Singapore is recognized locally, as privately-held company who have contributed to economicdevelopment in Singapore and abroad.

Benmark Singapore is also recognized and awardedfor bizSAFE practice on the Workplace Safetycapabilities.

Benmark Singapore is ISO 9001:2015 and OHSAS18001:2007 Certified which provides a good qualityservice and meets the expectation of its customers,suppliers and the company itself.

©Benmark Singapore Pte >1

Certificates

Benmark Singapore is recognized locally, as privately-held company who have contributed to economicdevelopment in Singapore and abroad.

Benmark Singapore is also recognized and awardedfor bizSAFE practice on the Workplace Safetycapabilities.

Benmark Singapore is ISO 9001:2015 and OHSAS18001:2007 Certified which provides a good qualityservice and meets the expectation of its customers,suppliers and the company itself.

©Benmark Singapore Pte >1

16

CO

NTA

CT

INFO

RMA

TIO

N

Contact Information:

Benmark Singapore Pte Ltd 141 Kaki Bukit Avenue 1, Shun Li Industrial Park, Singapore 416005Tel: +65 6842 6880 Fax: +65 6842 6836email: sales@benmark.com.sgwww.benmark.com.sg

Industrial Pipe Marking Solutions C

ON

TAC

T IN

FORM

ATIO

N

Certificates