INDUSTRIAL PARTS CATALOG SANDBLASTING EQUIPMENT...General sandblast parts 7 blasabineT c T ecab...
Transcript of INDUSTRIAL PARTS CATALOG SANDBLASTING EQUIPMENT...General sandblast parts 7 blasabineT c T ecab...
2018-10-092018-10-09
INDUSTRIAL PARTS CATALOGSANDBLASTING EQUIPMENT
(Cabinets, portable sandblasters and accessories...)
2018-10-09
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
2General sandblast parts
blasT cabineTs ............................................................................................................................................................................... 4
blasT cabineT ecO420................................................................................................................................................................. 5
blasT cabineT ecOnO 26 TO 48 seRies ................................................................................................................................ 6
g15 blasT gun ................................................................................................................................................................................ 6
blasT cabineT ecab 3-5-7 seRies ........................................................................................................................................... 7
g5 blasT gun FOR sucTiOn cabineTs (ecab) ................................................................................................................. 8
sh-5 gun ............................................................................................................................................................................................. 8
nOZZles FOR blasT cabineT – sucTiOn ............................................................................................................................ 9
nOZZles FOR blasT cabineT – PRessuRe .......................................................................................................................... 10
inDusTRial cabineT “M” seRies – sucTiOn ....................................................................................................................... 11
inDusTRial cabineT “M” seRies – PRessuRe ..................................................................................................................... 12
inDusTRial cabineT ‘‘M’’ seRie – PRessuRe ....................................................................................................................... 14
RecycleRs anD DusT cOllecTORs ....................................................................................................................................... 15
RecycleR sucTiOn – PRessuRe ............................................................................................................................................... 16
RecycleRs asseMbly .................................................................................................................................................................... 17
asseMblage RecycleuRs .......................................................................................................................................................... 17
DusT cOllecTOR seRie Dc - DcM ......................................................................................................................................... 18
DusT cOllecTOR / sPaRe PaRTs .............................................................................................................................................. 19
60 PX sanDblasTeR (FOR PaRTs Only) ................................................................................................................................ 20
sableuses PORTaTives ................................................................................................................................................................ 20
80 PX sanblasTeR .......................................................................................................................................................................... 21
100 PX sanblasTeR ........................................................................................................................................................................ 22
sanDblasT hOses.......................................................................................................................................................................... 23
nOZZles .............................................................................................................................................................................................. 24
nOZZles (cOnT’D) .......................................................................................................................................................................... 25
sanDblasTeR MODel 340 - 640 TyPe Rc66 / Rc70 ......................................................................................................... 26,27
Table of conTenTs
Page
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
3General sandblast parts
sanDblasTeR MODel 340 - 640 TyPe Rc76 / Rc80 ......................................................................................................... 28,29
sanDblasTeRs PPb-346/646/1046 : Rc-176 PRessuRe Release sysTeM ................................................................ 30,31
sanDblasTeRs PPb-346/646/1046 : Rc-176 - av-176 cOMbineD valve ................................................................... 32
sanDblasTeRs PPb-346/646/1046 : Rc-176 - MMv-175 abRasive MeTeRing valve .......................................... 33
sanDblasTeRs PPb-346/646/1046 : Rc-186 PRessuRe hOlD sysTeM ..................................................................... 34,35
sanDblasTeRs PPb-346/646/1046 : Rc-186 - av-186 aiR valve ................................................................................... 36
sanDblasTeRs PPb-346/646/1046 : Rc-186 - PMv-186 abRasive RegulaTOR valve ....................................... 37
sanDblasTeRs PPb-346/646/1046 : Rc-176/186 cOMbineD sysTeM ........................................................................ 38,39
sanDblasTeRs PPb-346/646/1046 : Rc-176/186 cOMbineD sysTeM - cOnTROl bOXess ............................... 40
elecTRic & PneuMaTic cOnTROl hanDles ...................................................................................................................... 41
sanDblasTeR MODel MP101-Rc76sanDblasTeR MODel MP101-Rc76 ................................................................. 42
a6, aR-7 & DePRess. valves ........................................................................................................................................................ 43
aiR sysTeM ......................................................................................................................................................................................... 44
bullaRD (88 vX) & bh3-bh5 hOODs ...................................................................................................................................... 45
nOva 2000 hOOD ass’y................................................................................................................................................................ 46
aP2-c & RaDeX aiR PuRiFieRs ................................................................................................................................................... 47
abRasives ........................................................................................................................................................................................... 48
eDP-10 PuMP & 4 sTage FilTRaTiOn kiT ................................................................................................................................ 48
abRasives (cOnT’D) ....................................................................................................................................................................... 49
abRasives - sPeciFicaTiOns Tables ...................................................................................................................................... 50
aiR cOnsuMPTiOn Tables - PRessuRe & sucTiOn ......................................................................................................... 51
vaRiOus accessORies .................................................................................................................................................................. 52
Table of conTenTs (conT’d)
Page Page
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
4General sandblast parts
blasT cabineTs
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
5General sandblast parts
blasT cabineT ecO420
4
2
3
5
6
1
79
8
10
11
12
12
13
13
1415
16
17
18
19
20
21
2223
24
25
26
27
1a
28
29
30
31
32
33
34
35
3738
39
sanDblasT Gun
# sTOcK DescRiPTiOn
A 420000 cOMPleTe gun WiThOuT nOZZle420010 cOMPleTe gun WiTh nOZZle
1 420001 nOZZle hOlDing nuT, bRass 2 905304 ceRaMic nOZZle, 7MM3 420y003 O-Ring, nOZZle4 420004 gun bODy, MOD-u-blasT (Only)5 420005 aiR JeT heX nuT, bRass6 420006 sleeve, aiR JeT7 420007 aiR JeT8 420008 sWivel aiR inleT FiTTing, 3/8’’9 420009 MeDia inleT FiTTing, baRb 3/8’’
10 606148 hOse, MeDia 1/2’’11 606104 hOse, aiR 1/2’’12 nPn seal13 nPn Ring
sanDblasT cabineT
# StoCK deSCRiPtioN # StoCK deSCRiPtioN
1 415101 laMP hOusing 20 415020 MOunTing Ring, glOves1a 415101a sWiTch 21 415121 liD, cabineT2 415102 laMP FiXTuRe, 2 bulbs 22 nPn cabineT3 415103 laMP 23 415123 legs, cabineT4 415104 laMP WinDOW 24 415124 TOP OF D.c.5 415105 TRiM-lOck WinDOW seal, Pe 25 415125 vacuuM MOTOR6 415106 siDe DOOR 26 nPn scReWs7 415107 DOOR laTch 27 415127 cOveR, MOTOR8 PRessuRe gauge,114», 150Psi 28 nPn POWeR cORD9 415108 RegulaTOR, aiR 3/8’’ 29 405100 DusT FilTeR
10 606104 hOse, aiR Push On 1/2’’ 30 415130 ROunD DusT cOllecTOR11 415111 3/8’’ FOOT PeDal cOMPleTe 31 415131 lighTing gaskeT
12 415112 MeTeRing valve Plug 33 415133 bOaRD, eXhausT
13 415113 MeTeRing valve 34 415134 Push ROD
14 624128 claMP, glOves 35 415135 caP, ROunD DusT cOllecTOR15 415115 glOves, PaiR 36 nPn hOle16 415116 WinDOW FRaMe cOveR 37 415137 cOveR17 910298 glass 38 nPn bOlT18 415118 PROTecTiOn FilM, Pe 39 415139 Web19 415119 PlasTic bOaRD 40 618320 DOOR gaskeT
3 6 12 11 131 2 4 5 7 8
912
10
13
40
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
6General sandblast parts
blasT cabineT1 616306 1/3 hp electric motor 120v AC, 60 Hz, 3450 rpm2 601315 dB-13 dust bag3 601310 dust pail4 603212 e3 nylon sleeve gloves, 8” id x 30” long (sold in pairs only)5 610205 22” x 14” laminated window6 613026 RPW 26 self-adhesive plastic shield, 20 3/4” x 12 7/8”7 610207 e3 window’s rubber gasket8 610101 G15-CN1-5, complete gun with 5/16” nozzle (standard)9 617014 on / off power switch
10617126 250 W halogen fl ood light (pyroceram glass non-included) (before 2017)617127 250 W halogen light bulb (for flood light 250W) (before 2017)
10a617161 Support pour barre de del (from2017)610322 vitre protectrice de del (from2017)
11 608010 AR 3/4 abrasive regulator 12 618226 Rubber plug for AR 3/4 abrasive regulator13 610523 1/3 hp eCoNoBlASt ® turbine, ½ ” shaft
14616935 AGC 10 amp. 250 v fuse616907 Fuse holder
15610213 Pyroceram glass 5½” x 4” (before 2008)
610206 Pyroceram glass (since 2008)
16610288 Standard iStblast ® complete door lock910223 toggle stem
17 606104 ½” diam. PvC abrasive conveying hose (sold per foot)18 624137 t188 (11 ¼”) clamp for pail19 606103 3 / 8 ” Ø air hose (sold per foot)20 618321 Rubber door gasket type d (sold per foot)21 624117 t64 (4”) Ø clamp22 624128 t128 (8”) Ø clamp for gloves
23
610452 eCoNo 26” x 36” expanded steel floor610453 eCoNo 28” x 44” expanded steel floor610451 eCoNo 36” x 36” expanded steel floor610454 eCoNo 36” x 48” expanded steel floor
24 610229 8” Ø glove flange (sold by unit)25 618126 Grommet26 632960 Pl adaptor ¾” FPt x ½” B27 608011 AR 3/4 clip28 600115 OPTiOn factory mounted pedal kit
29 600215 OPTiOn pedal kit after sales
G15 blasT Gun
1
610100 G15-CN1-4, complete blast gun w/ceramic nozzle ¼”
610101 G15-CN1-5, complete blast gun w/ceramic nozzle 5/16’’ (standard)
610102 G15-tN1-4, complete blast gun w/tungsten carbide nozzle ¼”610103 G15-tN1-5, complete blast gun w/tungsten carbide nozzle 5/16’’
2 607039 NA-G15 nozzle adaptor
3
605000 CN1-4, ¼” Ceramic nozzle605001 Buse céramique CN1-5 5/16’’ (standard)605002 Buse au carbure de tungstène tN1-4¼’’605003 Buse au carbure de tungstène tN1-55/16’’
4 610148 Suction head ass’y including # 2 - 3 - 7 - 8 - 10 - 13
5
605415 BC1-3 3/16’’ Boron carbide nozzle
605416 BC1-4 ¼” Boron carbide nozzle 605417 BC1-5 5/16’’ Boron carbide nozzle 605359 dC1-3 3/16’’ tungsten carbide nozzle
6 607043 3/4 ’’ thread, male nozzle adaptor7 610111 G-15 Suction head8 nPn Hexagonal screw 1/4’’ - 20 x 1/4 ’’9 618100 G15 “o” ring
10610112 G15 3/32” air jet for 3/16” nozzle610113 G15 1/8” air jet for 1/4’’ nozzle610114 G15 5/32” air jet for 5/16”nozzle (standard)
11 610110 G15 Gun body11a 910104 G15 Repair Kit12 618218 G15 rubber protector13 632761 3/8” MPt x ½” stem brass hose barb
14610106 G15-BC1-3, complete blast gun w/boron carbide nozzle 3/16”610107 G15-BC1-4, complete blast gun w/boron carbide nozzle 1/4 ’’610108 G15-BC1-5, complete blast gun w/boron carbide nozzle 5/16 ’’
12
13
9
4
8
7
32
65
11
10
141
1415
10
18
16
9
6
5
7
2612
13 1
8
2
3
21
11
17
19
2725
4
20
11a
G15 blasT Gun
blasT cabineT ecOnO 26 TO 48 seRies
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
7General sandblast parts
blasT cabineT ecab 3-5-7 seRies
1 609186 RvM 10” CoMPlete ReClAiMeR WitH MotoR2 616311 eleCtRiC MotoR ½ HP 120v / 1PH / 60 Hz / 3450 RPM3 610525 ½ HP iMPelleR4 624117 t ClAMP #64 (4”)5 606161 SuCtioN HoSe 3 1 / 2 ” ± (Sold PeR Foot)6 618334 SBR RuBBeR 1/8” x 2” Wide7 601315 dB-13 duSt BAG8 618318 RuBBeR FoAM ½’’ x ¼’’ 37.5 loNG9 624137 t ClAMP t-188 111/4” (Sold PeR uNit)
10 601310 23 l WHite PlAStiC duSt PAil
11 608010 CoMPlete AR-¾” ReGulAtoR (voiR FiGuRe 3)
12 606104 ½” ± PvC CoMPReSSed AiR HoSe (Sold PeR Foot)
13610270 2 WAy PNeuMAtiC PedAl608604 PedAl vAlve
14 608022 PReSSuRe ReGulAtoR15 606148 Multi-PuRPoSe ABRASive CoNveyiNG HoSe ½” ± (Sold PeR Foot)16 610120 G-5 CN2-5 CoMPlete BlASt GuN Std. W.5/16 Nozzle oRiFiCe (See P. 7)17 603212 e3 NyloN Sleeve GloveS, 8” id x 30” loNG (Sold iN PAiRS oNly)18 624128 t-ClAMP t-128 8” (Sold PeR uNit)19 611022 1/4” PReSSuRe GAuGe
20610202 4 ½” x 18” PRoteCtive GlASS FoR HAloGeN Flood liGHtS613029 PRoteCtive ACetAte FoR HAloGeN Flood liGHtS
21 608102 ½” FeMAle BAll vAlve FoR CoMPReSSed AiR iNlet
22 610288 iStBlASt ® StANdARd dooR loCK23 618321 ¼” x 1” RuBBeR dooR GASKet (Sold PeR Foot)24 939143 tHReAded PluG SQuARe 1’’ NPt25 610207 WiNdoW’S RuBBeR GASKet26 610205 14” x 22” lAMiNAted SAFety WiNdoW27 613026 RPW 26 SelF-AdHeSive PRoteCtive ACetAte28 617130 led liGHt 14.5W (100W) 5000K
29 617014 oN/oFF SWitCH29a 617019 SWitCH PRoteCtioN
30616934 AGC 2 AMP. FuSe 250 v616907 FuSe HoldeR
31 910223 toGGle SteM
32 618126 GRoMMet33 618127 GRoMMet34 632960 Pl AdAPtoR ¾ ” FPt x ½” B35 608011 AR ¾” CliP
36610455 eCAB 3 - 26” x 36” exPANded Steel FlooR610457 eCAB 5 - 28” x 44” exPANded Steel FlooR610459 eCAB 7 - 36” x 48” exPANded Steel FlooR
37 610229 8” Ø Glove FlANGe
3137
14
19
36
20 2828 30
29 29A2
34
7
1012
21 33
32
15
16
11
1
8
5
6
23
22
17
18
25
26
27
9
3424
35
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
8General sandblast parts
PROPeR aiR JeT/nOZZle cOMbinaTiOns
complete blast guns (pre-assembled*) nOZZles air jet(complete)
Orifices±G5 sH-5 nozzles Type Orifice code
610121 610135 ceramic cn2-4 1/4” 605004 610116 1/8”
610120 610136 ceramic (standard) cn2-5 5/16” 605005 610117 5/32”
610166 610144 ceramic cn2-6 3/8” 605015 610109 3/16”
610122 610137 ceramic cn2-7 7/16” 605006 610118 7/32”
610123 610138 Tungsten Tn2-4 1/4” 605007 610116 1/8”
610124 610139 Tungsten Tn2-5 5/16” 605008 610117 5/32”
610167 610145 Tungsten Tn2-6 3/8” 605018 610109 3/16”
610125 610140 Tungsten Tn2-7 7/16” 605009 610118 7/32”
610126 610141 boron carbide bn2-4 1/4” 605010 610116 1/8”
610127 610142 boron carbide bn2-5 5/16” 605011 610117 5/32”
610168 610146 boron carbide bn2-6 3/8” 605021 610109 3/16”
610128 610143 boron carbide bn2-7 7/16” 605012 610118 7/32”
pr
e-as
sem
bled
gun
1 610134 SH-5 blast gun body only2 607037 NA-G5 / SH5 adaptor3 605005 CN2-5, standard 5/16 ”± ceramic nozzle 4 618017 NW-2 rubber washer5 610117 Complete G5 / SH5 standard 5/32 ” ± air jet6 632760 1/2 ” stem brass hose barb7 618219 Rubber protector
2
3 4 5
6
7
1
pr
e-as
sem
bled
gun
1 610119 G-5 BlASt GuN Body oNly2 607037 NA-G5 / SH5 AdAPtoR3 605005 CN2-5, StANdARd 5/16” ± CeRAMiC Nozzle FoR G5-SH54 618017 NW-2 RuBBeR WASHeR5 610117 CoMPlete G5 / SH5 StANdARd 5/32 ” ± AiR jet6 618110 G5 “o” RiNG7 607038 G5 / SH5 HoSe AdAPtoR8 618219 RuBBeR PRoteCtoR
9 632771 1/2” BRASS FeMAle SWivel HoSe BARB
10 624015 3/4” “o” ClAMP
11 606104 1/2” PCv CoMPReSSed AiR HoSe (Sold PeR Foot)
12 606148 1/2” Multi PuRPoSe ABRASive CoNveyiNG HoSe (Sold PeR Foot)
2
3 4 5
8
6
7
9 10 11
1
12
sH-5 GunG5 blasT Gun FOR sucTiOn cabineTs (ecab)
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
9General sandblast parts
nOZZles FOR blasT cabineT – sucTiOn
MODel ORiFice lenGTH DescRiPTiOn
PaRT nb ceRaMic
FlANGed eNd Nozzle, StRAiGHt oRiFiCe FoR G-15 GuNS
605000 cn1-4 1/4” Ø1-1/4”
605001 cn1-5 5/16” Ø
PaRT nb TunGsTen caRbiDe
605002 Tn1-4 1/4” Ø1-1/4”
605003 Tn1-5 5/16” Ø
MODel ORiFice lenGTH DescRiPTiOn
PaRT nb bOROn caRbiDe
tHReAded Nozzle ¾” – 14 N.P.S., StRAiGHt oRiFiCe,uSe WitH FittiNG NH- ½” oNly (#607057)
605415 bc1-3 3/16” Ø
1-3/4”605416 bc1-4 1/4” Ø
605417 bc1-5 5/16” Ø
MODel ORiFice lenGTH DescRiPTiOn
PaRT nb ceRaMic
FlANGed eNd Nozzle, StRAiGHt oRiFiCe FoR G-5 ANd SH-5 GuNS
605004 cn2-4 1/4” Ø
1-1/4”605005 cn2-5 5/16” Ø
605015 cn2-6 3/8” Ø
605006 cn2-7 7/16” Ø
PaRT nb TunGsTen caRbiDe
605007 Tn2-4 1/4” Ø
1-1/4”605008 Tn2-5 5/16” Ø
605018 Tn2-6 3/8ӯ
605009 Tn2-7 7/16” Ø
PaRT nb bOROn caRbiDe
605010 bn2-4 1/4” Ø
1-1/4”605011 bn2-5 5/16” Ø
605021 bn2-6 3/8” Ø
605012 bn2-7 7/16” Ø
tN1-
CN1-
BC1-
CN2-
tN2-
BN2-
sH-5 Gun
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
10General sandblast parts
inDusTRial cabineT “M” seRies – sucTiOnnOZZles FOR blasT cabineT – PRessuRe
MODel ORiFice lenGTH DescRiPTiOn
PaRT nb TunGsTen caRbiDe
CoNiCAl tyPe Nozzle, StRAiGHt oRiFiCe. uSe WitH FittiNGS NC- ½”, NA-1 ANd NA-3 (Not WitH RCM-12)
605302 Dc2-F2 1/8” Ø
1-5/8”605303 Dc2-F3 3/16” Ø
605304 Dc2-F4 1/4” Ø
PaRT nb bOROn caRbiDe
605308 bn2-F2 1/8” Ø
1-5/8”605309 bn2-F3 3/16” Ø
605310 bn2-F4 1/4” Ø
MODel ORiFice lenGTH DescRiPTiOn
PaRT nb TunGsTen caRbiDe
tHReAded Nozzle ¾ ” – 14 N.P.S., StRAiGHt oRiFiCe,uSe WitH FittiNG NH- ½” oNly
605358 Dc1-2 1/8” Ø
1-3/4”605359 Dc1-3 3/16” Ø
605360 Dc1-4 1/4” Ø
605361 Dc1-5 5/16” Ø
PaRT nb bOROn caRbiDe
605414 bc1-2 1/8” Ø
1-3/4”605415 bc1-3 3/16” Ø
605416 bc1-4 1/4” Ø
605417 bc1-5 5/16” Ø
MODel ORiFice lenGTH DescRiPTiOn
PaRT nb silicOn caRbiDe
tHReAded Nozzle 1-¼” N.P.S., 1” Ø eNtRy veNtuRioRiFiCe, uSe WitH NCv, All NH-exCePt NH- ½”
905464 svc-4 5/16” Ø 6”
905465 svc-5 3/8” Ø 6-3/4”
905466 svc-6 7/16” Ø 8”
905467 svc-7 1/2” Ø 9-1/4”
905468 svc-8 1/2” Ø 9-1/4”
BN2-F
dC2-F
BC1-
dC1-
douBle veNtuRi Nozzle
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
11General sandblast parts
inDusTRial cabineT “M” seRies – sucTiOn
1603212 glOves WiTh nylOn sleeves, 8” iD Ø X 30” lOng603205 glOves WiTh leaTheR sleeves
2 624128 8” Ø glOve claMP3 610120 g5 cn2-5 cOMPleTe sanD blasT gun4 610288 sTanDaRD DOOR hanDle5 610275 DusT blOW-OFF gun6 606147 M.P. ¼” DusT gun hOse (sOlD PeR FOOT)7 608022 ½” PRessuRe RegulaTOR
8610270 sucTiOn FOOT PeDal608604 sucTiOn FOOT PeDal valve
9 cOMPleTe RecycleR (see Table)10 608010 aR ¾ abRasive RegulaTOR
11
606120 ReclaiMeR hOse 5” – 600 cFMReclaiMeR hOse 5” – 900 cFM
606123 ReclaiMeR hOse 6” – 1200 cFMReclaiMeR hOse 6” – 1800 cFM
12624121 5” claMP624124 6” claMP
13 618126 gROMMeT FOR aiR hOse ½”14 618127 gROMMeT FOR abRasive hOse ½ ”15 618133 gROMMeT FOR DusT gun hOse ¼” 16 666211 PneuMaTic sucTiOn ManiFOlD17 606148 MulTi PuRPOse ½” abRasive hOse18 606104 aiR hOse ½”
19606169 6” – 600 cFM sucTiOn hOse606171 7” – 900 cFM sucTiOn hOse606173 8” – 1200 cFM – 1800 cFM sucTiOn hOse
20 618305 ½” X 1” DRaWeR seal (sOlD PeR FOOT)
21624124 6” claMP624127 7” claMP624128 8” claMP
22 611022 ¼” PRessuRe gauge23 608011 aR ¾” cliP24 618226 DRain Plug25 632960 Pl aDaPTOR ¾” FPT X ½”
26616933 agc Fuse 1a-250 v616907 Fuse hOlDeR
27 617014 On/OFF sWiTch
28617150 24” FiXTuRe c/W leD lighT (cabineT less Than 48”)617151 48” FiXTuRe c/W leD lighT (cabineT MORe Than 48”)
29610212 23 ¾” X 18 ¾” laMinaTeD saFeTy glass (cabineT less Than 610211 17” X 48” laMinaTeD saFeTy glass (cabineT MORe Than 48”)618318 WinDOW seal ½’’ X ¼’’ (sOlD PeR FOOT)
30613038 RPW 50 – 23 ¾” X 18 ¾’’ aceTaTe glass PROTecTOR613035 RPW 1748 aceTaTe glass PROTecTOR (cabineT MORe Than 48”)
31 910223 TOggle sTeM32 618321 DOOR RubbeR gaskeT TyPe ‘‘P’’
33
610453 28” X 44” eXPanDeD sTeel FlOOR610458 36” X 36” eXPanDeD sTeel FlOOR610459 36” X 48” eXPanDeD sTeel FlOOR610462 42” X 48” eXPanDeD sTeel FlOOR610463 48” X 48” eXPanDeD sTeel FlOOR610469 48” X 60” eXPanDeD sTeel FlOOR610465 60” X 60” eXPanDeD sTeel FlOOR
34 600116 secuRiTy sWich (OPTiOnal)
sucTiOn ManiFOlD1 630301 ½” nPT niPPle2 632745 ½” nPTX ¼” nPT ReDucTOR3 632270 ¼” nPT elbOW4 630328 M-F ¼” nPT elbOW5 632760 ½” nPT aDaPTOR6 630390 ½” nPT inleT Ring7 630341 ½” nPT ball valve8 630327 ½” cROss
9
1
2
3
15
1921
13
18
22
23
24
25
18
17
14
1112
10
7
6
27
29
2830
31
18
32
26
7
4
8
Customerair
AR 3/4
to dustcollector
toRegulator
½’’
to dustshacker
todust gun
Customerair inlet
33
5
16
32
8
2
43
1
7
1
6
5
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
12General sandblast parts
inDusTRial cabineT “M” seRies – PRessuRe
1603212 GloveS WitH NyloN SleeveS e3 8’’ i.d. x 3’’ loNG603205 GloveS WitH leAtHeR SleeveS e3 8’’ i.d. x 3’’ loNG
2 624128 8” Ø Glove ClAMP3 HoSe, CouPliNGS ANd NozzleS4 610288 StANdARd dooR HANdle5 610275 duSt BloW-oFF GuN6 608022 ½” PReSSuRe ReGulAtoR
7610315 CoMPlete Foot PedAl-PReSSuRe608606 ReClAiMeR HoSe 5” – 600 CFM
8 CoMPlete ReCyCleR
9
606120 ReClAiMeR HoSe 5” – 600 CFMReClAiMeR HoSe 5” – 900 CFM
606123 ReClAiMeR HoSe 6” – 1200 CFMReClAiMeR HoSe 6” – 1800 CFM
10624121 5” ClAMP624124 6” ClAMP
11 618130 RuBBeR GRoMMet FoR ABRASive HoSe ½” SBH ½”12 618133 RuBBeR GRoMMet FoR duSt GuN ¼”13 666214 PReSSuRe MANiFold 14 606104 AiR HoSe ½”15 611022 ¼” PReSSuRe GAuGe
16616933 AGC FuSe 1A - 250 v616907 FuSe HoldeR
17 617014 oN/oFF SWitCH
18617150 24” FixtuRe C/W led liGHt (CABiNet leSS tHAN 48”)617151 48” FixtuRe C/W led liGHt (CABiNet MoRe tHAN 48”)
19610212 23 ¾” x 18 ¾” lAMiNAted SAFety GlASS (CABiNet leSS tHAN 48’’)610211 17” x 48” lAMiNAted SAFety GlASS (CABiNet MoRe tHAN 48”)618318 dooR SeAl (Sold By Foot)
20 613038 RPW 50 – 23 ¾” x 18 ¾” ACetAte GlASS PRoteCtoR613035 RPW 1748 ACetAte GlASS PRoteCtoR (CABiNet MoRe tHAN 48” )
21 910223 toGGle SteM22 618321 dooR RuBBeR GASKet tyPe ‘‘P’’
23
610453 28” x 44” exPANded Steel FlooR610458 36” x 36” exPANded Steel FlooR610459 36” x 48” exPANded Steel FlooR610462 42” x 48” exPANded Steel FlooR610463 48” x 48” exPANded Steel FlooR610469 48” x 60” exPANded Steel FlooR610465 60” x 60” exPANded Steel FlooR
610305
before2005
610313
after2005
81
2
323
15
13
14
11
12
10
17
19
18
20
21
14
22
16
7
6
6
4
5
9
CustomerAir
todust Collector
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
13General sandblast parts
1 618205 “O” Ring 2 610040 Plunger3 630361 ½” male plug4 611022 ¼” pressure gauge5 630367 ½” union 6 608102 ½” ball valve7 606001 ½” sbh hose (sold by foot)8 630372 ½” galvanized adaptor9 632771 ½ ” brass swivel adaptor
10 606148 ½” multi-purpose hose (sold by foot)11 607077 cFa ½” tank coupling12 608043 aR-7 abrasive regulator13 618209 access door gasket14 631163 Reducer Pa 2” x ½”15 618001 Rubber washer QcW-116 630327 ½” cross17 610047 Top flange
18630361 Plug ½” n.P.T. (before jan. 2001)630671 Plug 1” n.P.T. (after janv. 2001)
19 630301 ½” nipple20 630328 ½” T fitting21 630351 hexagon reducer ½” x ¼”22 630341 90° ½ ” brass elbow23 630340 Pa elbow 90° FF24 624205 ‘‘H’’ Clamp #5
Pressure vessel M101P
PRessuRe vessel M101P - 610313PRessuRe vessel M101P - 610305
4
2
6
1
712
4
2
6
1
712
17
5
4
3
3
2
9 8
8
1
7
6
10
11
12
13
14
15
16
16
18
19
19
19
19
20
21
22
23
24
24
22
23
aR-7 abRasive ReGulaTOR
PneuMaTic valves
a6 acTuaTOR
DePRessuRiZaTiOn valve
C 608951 Complete depressurization valve1 324560 Push-in ¼” x 90°2 608488 Retaining collar3 608487 spring4 608994 Tapped cover5 608960 complete plug6 608961 Welded body (#7 included)7 618214 Rc66 lining8 618217 Rubber plug only9 608481 Retaining plate
10 608480 Push rod11 618216 Diaphragm12 608482 complete a6 actuator
Type 66 / 76or
6
9
8
1
2
3 4
10
11
5
1 2
7
Type 70 / 80
A B
C
d
e
A 608482 complete a6 actuator1 324560 Push-in ¼’’ @ 90°2 608488 Retaining collar3 608487 Spring4 608481 Retaining plate5 608480 Push rod6 618216 diaphragm
d
608309 complete 1’’ valve608307 complete 1¼’’ valve608316 Repair kit 1” including # 1-2-3-4-5608317 Repair kit valve 1¼’’ including # 1-2-3-4-5
e608302 complete 1” valve608303 complete 1¼” valve
e1 608332 Repair kit 1” assemblye2 608333 Repair kit 1¼” assembly1 608322 Diaphragm only (1”) 2 608323 Diaphragm only (1¼” )
a6 + Rc66
a6
Rc66
e1 e2
1 2
3
4
5
1(a) port
12(P1) port
10(P2) port
1
2
(shown : 1’’ valve)
Repair kitDiagram
2(b) port
B 608043 complete aR-7 abrasive regulator
1 608047 lower housing2 608039 Regulating screw3 608091 Retaining plate4 608093 handle5 608046 upper housing6 608040 Regulating plate7 608036 Rubber tube8 608037 Pinch roller9 618228 Regulation tube
10 618231 gasket11 608096 bolt kit
12
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
14General sandblast parts
inDusTRial cabineT ‘‘M’’ seRie – PRessuRe
1 607012 CQA ½” CouPliNG2 606001 SBH ½” HoSe (Sold PeR Foot)3 607059 NC3-N3 ½” x 1” NPt4 605303 dC2F3 StANdARd Nozzle5 607040 NA-1 AdAPtoR 1” NPt6 607057 NH ½’’ AdAPtoR ¾” NPS7 607056 NH ½’’ AdAPtoR 1¼” NPS8 voiR tHReAded Nozzle ¾” NPS9 voiR douBle veNtuRi Nozzle 1¼” NPS
1 630301 CloSe NiPPle ½” NPt2 632745 BuSHiNG ½” NPt x ¼” NPt 3 632270 HoSe BARB ¼” NPt x ¼” HoSe4 630328 tee M-F ¼” NPt5 632760 HoSe BARB ½” NPt x ½” HoSe6 630317 PluG NiPPle ½” NPt x 2’’ lG7 630341 StReet elBoW MF ½” NPt8 632273 HoSe BARB 1/8” NPt x ¼” HoSe9 610390 MANiFold iNlet
10 608102 BAll vAlve11 630361 ½” MAle PluG12 608519 Pilot vAlve13 632226 StReet tee Pl ¼’’14 632002 1/8” Hex. NiPPle15 632018 StReet tee Pl 1/8”16 632281 AdAPtAteuR Pl 1/8”17 630327 CRoSS FittiNG ½”18 324561 RACCoRd PuSH-iN 90° 1/8” NPt ¼” tu20 632026 90° Pl elBoW MF 1/8’’
1 324560 PuSH-iN CouPliNG 90 ¼” KQlo7-35S2 630860 1¼” M x 1” F PA BuSHiNG3 630624 1” Ced. 80 PA NiPPle4 605011 BN2-5 5/16 Nozzle5 618110 G5 o-RiNG6 630690 1” AdAPtoR7 607087 HoSe ClAMP douBle Bolt 1¼’’8 606005 SBH 1” SANd BlASt HoSe (Sold PeR 9 630605 1” x 7’’ lG. PA NiPPle
10 630671 1” MAle PluG11 630630 1” PA tee12 630680 1” PA uNioN13 610070 SPACeR14 608104 1” BAll vAlve
15608611 1” NPt dePReSS. vAlve608612 diAPHRAGM FoR 608611
16 630605 1” x 3’’ lG. PA NiPPle
sanDblasT HOse : cabineT
PneuMaTic PRessuRe ManiFOlD 666214
DePRessuRiZinG sysTeM
(OPTiOn)
dust gun
Red Control hose
Green hosecontrol
SANdBlASt HoSe
douBle veNtuRi Nozzle
Regulatorreturn
Pluggednipple
Regulator1/2’’
dust collectorshaker
Pressurevessel
2
3
3
7
8
9
4 5
1
ReCyCleR
SANdBlAStveSSel
9
1
2
3
3
3
45
6
6
7
87
13
12
11
11
10
16
10
1415
depress
1
9
1
13
24
4
5
5
8
5
7
7
2
3
10
13
11
1420
15
18
18
17
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
15General sandblast parts
RecycleRs
anD
DusT cOllecTORs
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
16General sandblast parts
RecycleR sucTiOn – PRessuRe
before 2004
To cabinet
To dust collector
4
9
5
1
22
7
8
3
6
18
17
14
12
16
15
11
13
18
18
10
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
17General sandblast parts
RecycleRs asseMbly
asseMblaGe RecycleuRs
1 2 3 4 5 6 7 8 9
Complete recycleur Casing Hopper
SuctionHopperAdaptor
ImpellerCase
OutletCase
CasingSupport
PressureHopperSupport
SuctionHopperSupport
Impeller
609188RvM 13’’ 609230 609286 609287 609202 -- 609180 -- 609178 610526
609242Rvb 13’’ 609230 609286 609287 -- 609212 609180 -- 609178 610526
609189RPM 13’’ 609230 609286 -- 609202 -- 609180 609197 -- 610526
609242RPb 13’’ 609230 609286 -- -- 609212 609180 609197 -- 610526
609190RvM 16’’ 609231 609286 609287 609203 -- 609180 -- 609178 610527
609244Rvb 16’’ 609231 609286 609287 -- 609213 609181 -- 609178 610527
609191RPM 16’’ 609231 609286 -- 609203 -- 609181 609197 -- 610527
609245RPb 16’’ 609231 609286 -- -- 609213 609181 609197 --- 610527
609192RvM 24’’ 609232 609286 609287 609204 -- 609181 -- 609174 610528
609246Rvb 24’’ 609232 609286 609287 -- 609214 609182 -- 609174 610528
609193RPM 24’’ 609232 609286 -- 609204 -- 609182 -- -- 610528
609247RPb 24’’ 609232 609286 -- -- 609214 609182 -- -- 610528
10 11 12 13 14 15 16 17 18
CompleteRecycler Motor
ExteriorWear Pad
Doorlatch
RubberBand
ScreeningGrill
Auto-adhesiveRubber
(sold per foot)
Auto-adhesiveFoam
(sold per foot)
AbrasiveCarry Hose
(sold per foot)
SuctionHose
(sold per foot)
609188RvM 13’’
1 hp616313 609283 610269 618334
41’’633024
1.33 p.c. 618318 618305 606120 606169
609242Rvb 13’’ -- 609283 610269 618334
41’’633024
1.33 p.c. 618318 618305 606120 606169
609189RPM 13’’
1 hp616313 609283 610269 618334
41’’633024
1.33 p.c. 618318 618305 606120 606169
609243RPb 13’’ -- 609283 610269 618334
41’’633024
1.33 p.c. 618318 618305 606120 606169
609190RvM 16’’
2 hp616324 609284 610269 618334
52’’633024
1.33 p.c. 618318 618305 606123 606171
609244Rvb 16’’ -- 609284 610269 618334
52’’633024
1.33 p.c. 618318 618305 606123 606171
609191RPM 16’’
2 hp616324 609284 610269 618334
52’’633024
1.33 p.c. 618318 618305 606123 606171
609245RPb 16’’ -- 609284 610269 618334
52’’633024
1.33 p.c. 618318 618305 606123 606171
609192RvM 24’’
3 hp616332 609285 610269 618334
76’’633024
1.33 p.c. 618318 618305 606124 606173
609246Rvb 24’’ -- 609285 610269 618334
76’’633024
1.33 p.c. 618318 618305 606124 606173
609193RPM 24’’
3 hp616332 609285 610269 618334
76’’633024
1.33 p.c. 618318 618305 606124 606173
609247RPb 24’’ -- 609285 610269 618334
76’’633024
1.33 p.c. 618318 618305 606124 606173
RecycleRs asseMbly
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
18General sandblast parts
DusT cOllecTOR seRie Dc - DcM
4
6
3
3
5
12
7
8
9
28
25
26
24
21
22
22
33
27
17
16
32
19
20
30
29
23
14
15
10
11
12
13
31
18
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
19General sandblast parts
DusT cOllecTOR / sPaRe PaRTs
MODelsDc
50Dc
100
DcM
100
Dc 16
0Dc
M 16
0Dc
200
Dc 23
0Dc
M 23
0Dc
330
DcM
330
MODels
Dc 50
Dc 10
0Dc
M 10
0Dc
160
DcM
160
Dc 20
0Dc
230
DcM
230
Dc 33
0Dc
M 33
0
# Part nb DescRiPTiOn aPPlicaTiOn # Part nb DescRiPTiOn aPPlicaTiOn
1
606167 Suction hose 4” (sold per foot) X
24
601480 Plate x x606168 Suction hose 5” (sold per foot) X X 610526 impeller 1 hp x606169 Suction hose 6” (sold per foot) X X 610527 impeller 2 hp x606171 Suction hose 7” (sold per foot) X X 610528 impeller 3 hp x606173 Suction hose 8” (sold per foot) X X 610529 impeller 5 hp x606177 Suction hose 10” (sold per foot) X X
25
616313 Motor 1 hp 120v Std - 600 CFM x
2
624117 4’’ clamp X 616324 Motor 2 hp 575v Std - 900 CFM624121 5’’ clamp’ 616332 Motor 3 hp 575v Std - 1200 CFM x624124 6’’ clamp X X 616340 Motor 5 hp 575v Std - 1800 CFM x624127 7’’ clamp X X
26
601342 Motor plate (1 hp) x624128 8’’ clamp X X 601343 Motor plate (2 hp) x624137 10’’ clamp X X 601482 Motor plate (3 hp) x
3601316 dust bag dB-6 9 16 16 25 25 30 36 36 601483 Motor plate (5 hp) x601308 dust bag dB-9 36 36
27
601486 Barrel option dC/dCM 100 - 15 gals x x4 601309 ‘‘S’’ hook X X X X X X X X X X 601487 Barrel option dC/dCM 160 - 30 gals x x5 612427 level leg X 601488 Barrel option dC/dCM 160 - 15 gals x x6 619006 dC50 wheel X 601489 Barrel option dC/230 330 - 15 gals x x x x7 608508 Shaking button X X X X X X X X X 601490 Barrel option dC/230 330 - 30 gals x x x x8 608408 Flow regulator X X X X X X X X X 601492 Barrel option dC/dCM 160 - 45 gals x x9 608409 Adaptor X X X X X X X X X 901449 Barrel option dC200 - 30 gals x
10 608406 Hinge Axle X X X X X X X X X
28
601423 vertical muffler 600 CFM x11 608405 Actuation cylinder X X X X X X X X X 601424 vertical muffler 900 CFM x12 608407 Hinge plate X X X X X X X X X 601425 vertical muffler 1200 CFM x13 610280 Adjustable air trap X X X X X X X X X X 601426 vertical muffler 1800 CFM x14 610287 door handle X X X X X X X X X
29
601434 Horizontal muffler 6000 CFM x15 610223 toggle lock X X X X X X X X X 601435 Horizontal muffler 900 CFM x16 910223 toggle stem X X X X X X X X X 601436 Horizontal muffler 1200 CFM x17 601378 ‘‘z’’ Cleaning trap X X X X X X X X X 601437 Horizontal muffler . 1800 CFM x18 618306 Auto-adhesive foam (sold per foot) X X X X X X X X X X
30
601402 Horizontal muffl er adaptor 600 CFM x19 616575 electric cable (sold per foot) X X X X 601403 Horizontal muffl er adaptor 900 CFM x20 616406 electrical plug X X X X 601404 Horizontal muffl er adaptor 1200 CFM x
21
617063 electrical box X X X 601405 Horizontal muffl er adaptor 1800 CFM x617066 2 hp overload protector X
31
601416 vertical muffl er adaptor 600 CFM x617068 3 hp overload protector X 601417 vertical muffl er adaptor 900 CFM x617067 5 hp overload protector X 601418 vertical muffl er adaptor 1200 CFM x
22 618318 Auto-adhesive rubber (sold per foot) X X X X X X X X X X 601419 vertical muffl er adaptor 1800 CFM x
23601340 Plate x 32 618305 Rubber foam ½’’ x 1’’ x601341 Plate x 33 610269 toggle stem x
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
20General sandblast parts
1 601151 Complete control handle2 601152 Protective hood3 601153 4 Ceramic nozzles kit (2.2 / 2.5 / 3 / 3.5 mm)4 601154 Hood visor
1
2
3
4
60 PX sanDblasTeR (FOR PaRTs Only)
portable sandblasters
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
21General sandblast parts
1 601110 lift plug complete2 601118 Handlebar3 601101 tank4 603033 Hood BH3
4a 613004 Replacement lens 4” x 6” BH35 611022 Pressure gauge6 608220 Safety valve7 632504 BP Hex. Nipple 3/8’’
7a nPn Nipple connector8 601120 intake manifold9 nPn Hex Nut (M6)
10 nPn Washer11 nPn Head screw12 601119 Water trap fi lter13 nPn Air hose14 608005 Brass air supply valve 3/8”15 nPn Male-female connector16 nPn Screw (M8x10)17 nPn Foot18 608005 Steel sand metering valve 3/8”19 601111 Sand outlet pipe20 nPn Axle foot21 nPn Washer22 601121 Wheel23 601117 Axle24 nPn Cotter pin25 601112 Sand hose 3/8”26 601113 Clamp27 601114 intake connector 3/8”28 630401 Galvanized bushing 1 3/8”29 618015 Washer NW-030 605031 Ceramic nozzlee CN3-2 1/8”31 602007 RcM-12 complete (include 32 à 39)32 602121 Body33 602125 Pin RCM-1234 602132 Allen key35 602127 Allen screw36 602126 Block37 602123 Handle38 602122 Spring39 602124 Axle40 603035 Hood BH5
40a 613008 visor BH5 5” x 10 1/4”
sTanDaRD (bH-3)
RcM-12 HOODs
OPTiOnal(bH-5)
1 630350 Fitting ½” x 3/8”2 630341 ½” elbow fi tting3 632504 3/8” brass nipple4 630329 ‘‘T’’ fi tting ½” x ½” x 3/8”5 607070 TC ½” tank coupling6 607002 QC ½” coupling7 624205 Clamp
8606001 SBH ½” sandblast hose (sold to foot)606011 Complete sandblast hose assembly (6-7-8-9)
9 607050 NC ½” coupling
9
1 3
2 4
56
8
7
4 40
80 PX1
2
3
5
8
7
7
79 10
1114 15
13
13
18
18
7a
1620
24
24
24
25 26
2728
2930
2121
17
21
22
22
23 19 26
31
37
3832
33
34
35 39
36
HOse anD TOuGH FiTTinG asseMbly # 601116
640a
4a
< -- MANuel A jouR
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
22General sandblast parts
1 612103 lift plug (100-PX) complete2 618203 gasket (100-PX)3 611022 air pressure gauge4 630331 Fitting Pn5 630328 Fitting Pn-’’T’’ ½”6 608102 ½” ball valve7 630301 close nipple ½”8 608230 exhaust drain (100-PX)9 630341 elbow Pn 90° x ½”
10 608011 brass hose barb ½”11 624106 clamp T-1612 606082 side hose/clamp (100-PX)13 608005 abrasive regulator aR 3 / 8”14 630201 close nipple Pn 3 / 8”15 630350 hex. bushing Pn 3 / 8” x ½”
16 607070 Tc - ½” tank coupling17 618000 Washer QcW-O18 607002 Quick hose coupling Qc - ½”19 606011 10’ sbh - ½” with Qc-nc20 607050 nozzle coupling nc- ½” 21 624205 clamp22 606001 sbh-½” bulk, per foot (min. order 10’)23 618015 Washer nW-024 605031 ceramic nozzle cn3-2 1 / 8”25 607044 nozzle adaptor na-1”26 602007 RcM-12 complete (incl. 27 to 34) 27 602121 body28 602122 spring29 602123 handle30 602124 axle
31 602126 block32 602127 allen screw33 602132 allen key34 602125 Pin35 619002 Plastic wheel 8”36 619070 Wheel hub cap37 630346 elbow Pn 45° x ½”38 630327 cross fitting ½”39 630361 ½” male plug
40603035 hood bh5603008 visor RPW-5 (10¼” x 5”)
41603033 hood bh-3613004 visor RPW-3 (5” x 6”)
RcM-12Complete(602007)
Fig ‘‘a’’
sTanDaRD OPTiOnal
4041
sbH ½” i.D.
27
26
34
33
3223
28
30
31
292425
23 Fig. ‘‘B’’
Fig. ‘‘C’’20
100PX
12
3
4
57
9
10
12
19 2118
21
26
36 35
3536
11
10
11
14
14
15
3816
17
13
8
67
4
39
17
18
19
21 22 23 2420 25
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
23General sandblast parts
606001 SBH- ½” D.i. ½” D.e. 13 / 16 ”606003 SBH- ¾” D.i. ¾” D.e. 1 ½’’ 606004 SBH-1 ¼” D.i. 1 ¼” D.e. ‘‘whip’’ 1 7/ 8 ”606005 SBH-1” D.i. 1” D.e. 1 31 / 32”606006 SBH-1 ¼” D.i. 1 ¼” D.e. 2 5/ 32”606007 SBH-1 ½” D.i. 1 ½” D.e. 2 3/ 8 ”606008 SBH-2” D.i. 2” D.e. 2 7/ 8 ”
606021 12 ½” sbh- ¾ ” / Qc- ¾” & Qc- ¾”606022 12 ½” sbh- ¾” / Qc- ¾” & nh- ¾”606024 25’ sbh- ¾” / Qc- ¾” & Qc- ¾”606023 25’ sbh- ¾” / Qc- ¾” & nh- ¾” 606025 50’ sbh- ¾” / Qc- ¾” & Qc- ¾”606026 50’ sbh- ¾” / Qc- ¾” & nh- ¾” 606030 12 ½’’ sbh-1” / Qc-1” & Qc-1”606029 12 ½’’ sbh-1” / Qc-1” & nh-1”606036 25’ sbh-1” / Qc-1” & Qc-1”606031 25’ sbh-1” / Qc-1” & nh-1”606037 50’ sbh-1” / Qc-1” & Qc-1”606032 50’ sbh-1” / Qc-1” & nh-1”606042 50’ sbh-1 ¼’’ / Qc-1 ¼” & Qc-1 ¼”606040 50’ sbh-1 ¼’’ / Qc-1 ¼” & nh-1 ¼”606052 50’ sbh-1 ½ ” / Qc-1½” & Qc-1½” 606050 50’ sbh-1 ½ ” / Qc-1½” & nh-1½”606045 25’ sbh-1 ¼” Whip Qc-1” & Qc-1”606046 25’ sbh-1 ¼” Whip Qc-1” & nh-1”606047 50’ sbh-1 ¼” Whip Qc-1” & Qc-1”606048 50’ sbh-1 ¼” Whip Qc-1” & nh-1”606049 12.5’ sbh-1 ¼” Whip Qc-1” & Qc-1”
Nozzle washer NW
618016 NW-1 D.i. 1” - D.e. 1 ½’’ - eP. ¼” for 1 ¼” threaded nozzle nPs
618015 NW-0 D.i. 5/ 8” - D.e. 11/ 8 ” - eP. 1/ 8 ” for ceramic nozzle type cn3- conical
Coupling washers QCW
618001QCW-1 D.i. 1 ¼” - D.e. 1 7/ 8” - eP. 7/16” for couplings Qc, cQa- ½”, ncv, ncvX, cFa- ½”, Tc-1 ¼” et Tc-2
618000 QcW-0 for coupling Qc ½”
618005 Qcn for nylon coupling
Nozzle coupling NH-
607056 nh- ½” for 1 ¼” threaded nozzle nPs on sbh- ½” hose
607057nh- ½” for ¾” threaded nozzle – 14 nPs (Dci-, bci-) on hose sbh-½ ”
Nozzle coupling NA-, NC-
607042na-3 for 1¼” nPs to adapt ceramic nozzle type cn3- on nh-nozzle coupling
607044na-1 adaptator 1” nPT for conical nozzle cn3 – Dc2F – bn2F
607059nc3-n3 1 / 2 ” x 1” nPT for conical nozzle cn3 Dc2F – bn2F
NOTE: The following nozzle coupling are 1 ¼” NPS
607051 nh- ¾ for sbh- ¾” D.i. x 1 ½ ” D.e.607052 nh-1” for sbh1” D.i. x 1 31 / 32” D.e.607053 nh-1 ¼” for sbh-1¼” D.i. x 2 5 / 32” D.e.607054 nh-1 ½” for sbh-1 ½ D.i. x 2 3/ 8 ” D.e.
Nylon nozzle couplings
607018 1’’ nylon nozzle coupling
607019 1¼’’ nylon nozzle coupling
607020 ¾’’ nylon nozzle coupling
NC-NCv Nozzle coupling
607075 ncv coupling for 1 ¼” threaded nozzle nPs
607045 ncvX coupling for nozzle DcvX – series only
HOse anD cOuPlinG asseMbliesnOZZle cOuPlinGs
SANdBlASt HoSe SBH 1½’’
NH 1½’’QC 1½’’
SANdBlASt HoSe 1¼’’
NH 1¼’’ QC 1¼’’
SANdBlASt HoSe 1’’
NH 1’’ QC 1’’
SANdBlASt HoSe ¾’’
NH ¾’’ QC ¾’’
sanDblasTinG HOse sbH WasHeRs
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
24General sandblast parts
ceRaMicPart Nb Model orifice length605031 CN3-2 1/8” Ø 3 ¾”
conical type nozzle, straight orifice. use with fittings nc- ½”, na-1, na-3 and RcM-12
605033 CN3-3 3/16” Ø 3 ¾”605034 CN3-4 ¼” Ø 3 ¾”605035 CN3-5 5/16” Ø 3 ¾”605036 CN3-6 3/8” Ø 3 ¾”
TunGsTen caRbiDe
Part Nb Model orifice length605302 dC2-F2 1/8” Ø 1 5/8” conical type nozzle, straight orifice. use with
fittingsnc- ½”, na-1 and na-3 (not with RcM-12)
605303 dC2-F3 3/16” Ø 1 5/8”605304 dC2-F4 ¼” Ø 1 5/8”
bOROn caRbiDe
605308 BN2-F2 1/8” Ø 1 5/8”conical type nozzle, straight orifice. use with fittings nc- ½”, na-1, na-3 (not with RcM-12)
605309 BN2-F3 3/16” Ø 1 5/8”605310 BN2-F4 ¼” Ø 1 5/8”
607012 cQa- ½” for shb- ½” D.i. x 1 13/16” D.e.
607003 Qc- ¾” for sbh- ¾” D.i. x 1 ½” D.e.607005 Qc-1” for sbh-1” D.i. x 1 31 /32” D.e.607007 Qc-1 ¼” for sbh-1¼” D.i. x 2 5/32” D.e.607009 Qc-1 ½” for sbh-1½” D.i. x 2 3/8” D.e.
607016 Qc- ¾” nylon - nyl. connect. ¾’’
607001 nylon connect. 1’’ - Qc-1
607011 nylon connect. Qc-1¼’’ nylon
607021 nylon connect. Qc-1½’’ nylon
607075 Tc-1 ¼” 1 ¼” nPT for models 340-P and 640-P
607080 Tc-2 2” nPT for use with abrasive former regulator aR-2
607077 cFa- ½” ½” nPT for piping ½ ” MPT
607074 Tc 1¼’’ - nylon
HOses cOuPlinGs
AluMiNiuM AluMiNiuM
NyloN NyloN
TanK cOuPlinGs Tc- & cFa-
nOZZles
CN3
dC2-F / BN2
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
25General sandblast parts
TunGsTen caRbiDe
Part Nb Model orifice length605358 dC1-2 1/8” Ø 1 3/4”
Threaded nozzle ¾” – 14 n.P.s., straight orifice,use with fitting nh - ½’’ only
605359 dC1-3 3/16” Ø 1 3/4”
605360 dC1-4 ¼” Ø 1 3/4”
605361 dC1-5 5/16” Ø 1 3/4”
bOROn caRbiDe
605414 BC1-2 1/8” Ø 1 3/4”
Threaded nozzle ¾” – 14 n.P.s., straight orifice,use with fitting nh - ½” only
605415 BC1-3 3/16” Ø 1 3/4”
605416 BC1-4 ¼” Ø 1 3/4”
605417 BC1-5 5/16” Ø 1 3/4”
TunGsTen caRbiDe
Part Nb Model orifice length605313 dC3-3 3/16” Ø 3”
Threaded nozzle 1¼” – 14 n.P.s., straight orifice,use with ncv, all nh- except nh - ½”
605314 dC3-4 ¼” Ø 3”
605315 dC3-5 5/16” Ø 3”
605316 dC3-6 3/8” Ø 3”
TunGsTen caRbiDe
Part Nb Model orifice length605252 dCvx-5 5/16” Ø 6”
hi-production flanged end nozzle, venturi orifice, 1 ¼” Ø entry, use with ncvX only
605253 dCvx-6 3/8” Ø 6¾”
605254 dCvx-7 7/16” Ø 8”
605255 dCvx-8 1/2” Ø 9¼”
TunGsTen caRbiDe
Part Nb Model orifice length605203 dCv-3 3/16” Ø 4 1/4”
Threaded nozzle 1¼” n.P.s., 1” Ø entry venturiorifice, use with ncv, all nh- except nh - ½”
605204 dCv-4 1/4” Ø 5 1/4”
605205 dCv-5 5/16” Ø 6”
605206 dCv-6 3/8” Ø 6 3/4”
605207 dCv-7 7/16” Ø 8”
605208 dCv-8 1/2” Ø 9 1/4”
bOROn caRbiDe605454 BCv-4 1/4” Ø 4 1/8”
Threaded nozzle 1¼” n.P.s., 1” Ø entry venturiorifice, use with ncv, all nh- except nh- ½ ”
605455 BCv-5 5/16” Ø 4 1/8”
605456 BCv-6 3/8” Ø 4 1/8” BCv-
dCv-
dCvx
silicOn caRbiDe
Part Nb Model orifice length905464 SCv-4 1/4” Ø 6”
Threaded nozzle 1¼” n.P.s., 1” Ø entry venturiorifice, use with ncv, all nh- except nh- ½”
905465 SCv-5 5/16” Ø 6¾”
905466 SCv-6 3/8” Ø 8”
905467 SCv-7 7/16” Ø 9¼”905468 SCv-8 1/2” Ø 9¼”douBle veNtuRi Nozzle
nOZZles (cOnT’D)
dC1 / BC1
dC3
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
26General sandblast parts
sanDblasTeR MODel 340 - 640 TyPe Rc66 / Rc70 - eXPlODeD vieW
Red hose
green hose
To
To
air inlet
see DeTails PaGe __
electric remote control option12 v Dc / 120v
4
2
3
5
6
1
7
9
8
10
11
12
15
22
13
14
15
16 17
17
18
19
19
2021
22
41
24
25
26
35
28
18
29
30
3132
33
34
35
35
36
37
35
39
44
41
40 40
43
44
44
45
45
46
47
48
38
49
49
49
50
51
52
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
27General sandblast parts
sanDblasTeR MODel 340 - 640 TyPe Rc66 / Rc70 - eXPlODeD vieW
1 612200 Pressure vessel only2 611052 1” moisture separator3 608104 1” ball valve4 611022 ¼” 1 / 4 ” nPT gauge5 619013 12” Wheel6 619090 Wheel axle
7610056 access door kit618209 access door gasket only
8 610041 5” Plunger9 618201 “O” Ring
10
612245 1” hose assembly606005 1” hose only630690 1” nPT adaptor624208 ‘‘h’’ clamp
11 630680 1” nPT union12 607075 Tc 1 ¼” coupling13 608043 aR-7 abrasive regulator (page 32)14 608230 Drain valve
15608309 1” pneumatic valve version Rc 70-80 (page 32)608302 1” pneumatic valve version Rc 66-76 (page 32)
16 630629 1” cross coupling17 630671 1” Plug18 630630 1” T coupling19 630653 1” x ¼” coupling20 630840 T 1 ¼” T coupling21 630884 1 ¼” Plug22 608951 Depress valve (page 28)24 631135 T 2” T fitting25 631152 2” to 1” reducer26 630640 1” x 90° elbow28 608534 Pilot valve29 611035 Mini filter30 608800 Pneumatic remote control handle31 607075 1 ¼” Tc nozzle adaptor32 605204 venturi nozzle Dcv- 4- x ¼”
33606005 1” sandblasting hose only (sold per foot) 25’ min.606036 1” sandblasting hose, 25’ with Qc-Qc coupling606037 1” sandblasting hose, 50’ with Qc-Qc coupling
34 607005 1” Qc coupling35 618001 QcW-1 Qc coupling washer36 618016 nW-1 nozzle washer
37606191 30’ dual hose with couplings606193 55’ dual hose with couplings
38 607219 ¼” female quick coupling39 607223 ¼” male quick coupling40 632279 green hose coupling ¼”41 632281 Red hose coupling 1/8”43 324557 ‘‘y’’ push-in coupling44 632202 ¼ ” nipple45 324571 Plastic tube46 324561 Push-in 1/8” nPT x ¼” coupling47 632026 1/8” male/female elbow48 632226 “T” male/female ¼” coupling49 630601 1” nipple50 630801 1 ¼” nipple51 632214 Male ¼” x 1/8” nPT male coupling52 631080 ¼” union
1 612250 Pressure vessel only2 611053 1 ¼” moisture separator3 608105 1 ¼” ball valve4 611022 ¼” nPT gauge5 619015 16” Wheel6 619091 axle
7610056 access door kit618209 access door gasket
8 610041 5” plunger9 618201 “O” Ring
10
612246 1 ¼’’ hose assembly606006 1 ¼” hose only630885 1 ¼” nPT adaptor624210 ‘‘h’’ clamp
11 630890 1 ¼” nPT union12 607075 Tc 1¼” coupling13 608043 aR-7 abrasive regulator (page 32)14 608230 Drain valve
15608307 1¼” pneumatic valve version Rc 70-80 (page 32)608303 1¼” pneumatic valve version Rc 66-76 (page 32)
16 630838 1¼” cross coupling17 630884 1¼” plug18 630840 1¼” ‘‘T’’ coupling19 630864 1¼” x ¼” coupling20 630840 ‘‘T’’ 1¼” ‘‘T’’ coupling21 630884 1¼ ” plug22 608951 Rc66/a6 depress complete kit (page 32)23 608482 a6 actuator (page 28)24 631135 2” ‘‘T’’ fitting25 631151 2” to 1¼” reducer26 630850 1 ¼” - 90° elbow28 608534 Pilot valve29 611035 Mini filter30 608800 Pneumatic remote control handle31 607075 1¼” Tc nozzle adaptor32 605205 venturi nozzle Dcv5- x 5/16”
33606006 1¼” sandblasting hose only (sold per foot) 50’ min.606042 1¼” sandblasting hose, 50’ with Qc-Qc coupling
34 607007 1¼” Qc coupling35 618001 QcW-1 coupling washer36 618016 nW-1 nozzle washer37 606193 55’ dual hose with couplings38 607219 ¼” female quick coupling39 607223 ¼” male quick coupling 40 632279 ¼” green hose coupling41 632281 1/8” red hose coupling 42 324560 Push-in ¼” x 90°44 632202 ¼” nipple45 324571 Plastic tube46 324561 Push-in 1/8” nPT x ¼” coupling47 632026 1/8” 90° male/female elbow48 632226 “T” male/female ¼” coupling 49
630801 1¼” nipple5051 632214 Male ¼” x 1/8” nPT male coupling52 632260 bP ¼” union joint
sanDblasTeR MODel 340 - 640 TyPe Rc66 / Rc70 - PaRTs lisT
Model 340 Model 640
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
28General sandblast parts
sanDblasTeR MODel 340 - 640 TyPe Rc76 / Rc80 - - eXPlODeD vieW
see DeTails PaGe 30
Red hose
green hose
To 15
To 27
air inlet
electric remote control option12 v Dc / 120 v
4
4
2
3
56
1
3
7
9
8
3231
36
26
24
35
14
16 17
17
11
12
15
15
13
1818
18
19
19
49
49
49
49
49
49
50
46
45
25
45
35
30
34
3435
3337
29
44
27
23
42
2848
42
42
51
41
40 40
44
47
39
38
44
44
41
20
21
22
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
29General sandblast parts
sanDblasTeR MODel 340 - 640 TyPe Rc76 / Rc80 - PaRTs lisT
1 612200 Pressure vessel only2 611052 1” moisture separator3 608104 1” ball valve4 611022 ¼” nPT gauge5 619013 12” wheel6 619090 axle
7610056 access door kit618209 access door gasket
8 610041 5” plunger9 618201 “O” Ring
10
612245 1” hose assembly606005 1” hose only630690 1” nPT adaptor624208 ‘‘h’’ clamp
11 630680 1” nPT union12 607075 Tc 1¼” coupling13 608043 aR-7 abrasive regulator (page 32)14 608230 Drain valve
15608309 1” pneumatic valve version Rc 70-80 (page 32)608302 1” pneumatic valve version Rc 66-76 (page 32)
16 630629 1” cross coupling17 630671 1” plug18 630630 1” ‘‘T’’coupling19 630653 1” x ¼” coupling20 630840 ‘‘T’’ 1¼” ‘‘T’’ coupling21 630884 1¼” plug22 608105 1¼” ball valve23 608482 actuator a6 (page 32)24 631135 ‘‘T’’ 2” ‘‘T’’ fitting25 631152 2” to 1” reducer26 630640 1” x 90° elbowv27 608015 Mini air regulator28 608534 Pilot valve29 611035 Mini filter30 608800 Pneumatic remote control handle31 607075 1¼” Tc nozzle adaptor32 605204 venturi nozzle Dcv-4- x ¼ ”
33606005 1” sandblasting hose only (sold per foot) 25’ min.606036 1” sandblasting hose, 25’ with Qc-Qc coupling606037 1” sandblasting hose, 50’ with Qc-Qc coupling
34 607005 1” Qc coupling35 618001 QcW-1 Qc coupling washer36 618016 nW-1 nozzle washer
37606191 30’ dual hose with couplings606193 55’ dual hose with couplings
38 607219 ¼” female quick coupling39 607223 ¼” FPT male quick coupling40 632279 ¼” green hose coupling 41 632281 1/8” red hose coupling 42 324560 Push-in ¼” x 90°44 632202 ¼” nipple45 324571 Plastic tube46 324561 Push-in 1/8” nPT x ¼” coupling47 632026 1/8” male/female elbow48 632226 “T” male/female ¼” coupling49 630601 1” nipple50 630801 1¼” nipple51 632214 Male ¼” x 1/8” nPT male coupling
1 612250 Pressure vessel only2 611053 1¼” moisture separator3 608105 1¼” ball valve4 611022 ¼” nPT gauge5 619015 16” wheel6 619091 axle
7610056 access door kit618209 access door gasket
8 610041 5” plunger9 618201 “O” Ring
10
612246 1¼’’ hose assembly606006 1¼” hose only630885 1¼” nPT adaptor624210 ‘‘h’’ clamp
11 630890 1¼” nPT union12 607075 Tc 1¼” coupling13 608043 aR-7 abrasive regulator (page 32)14 608230 Drain valve
15608307 1¼” pneumatic valve version Rc 70-80 (page 32)608303 1¼” pneumatic valve version Rc 66-76 (page 32)
16 630838 1¼” cross coupling17 630884 1¼” plug18 630840 1¼” ‘’T’’ coupling19 630864 1¼” x ¼” coupling20 630840 ‘‘T’’ 1¼” coupling21 630884 1¼” plug22 608105 1¼” ball valve (page 32)23 608482 a6 actuator (page 32)24 631135 2” T fitting 25 631151 2” to 1¼” reducer26 630850 1¼” @ 90° elbow27 608015 Mini air regulator28 608534 Pilot valve29 611035 Mini filter30 608800 Pneumatic remote control handle31 607075 Tc 1¼” nozzle adaptor32 605205 venturi nozzle Dcv-5- x 5/16 ”
33606006 1¼” sandblasting hose only (sold per foot) 50’ 606042 1¼” sandblasting hose, 50’ with Qc-Qc coupling
34 607007 1¼” Qc coupling35 618001 QcW-1 Qc coupling washer36 618016 nW-1 nozzle washer37 606193 55’ dual hose with couplings38 607219 ¼” female quick coupling39 607223 ¼” male quick coupling 40 632279 ¼” green hose coupling 41 632281 1/8” red hose coupling42 324560 Push-in ¼” @ 90°44 632202 ¼” nipple45 324571 Plastic tube46 324561 Push-in 1/8” nPT x ¼” coupling47 632026 1/8” male/female elbow48 632226 “T” male/female ¼” coupling49
630801 1¼” nipple5051 632214 Male ¼” x 1/8” nPT male coupling
Model 340 Model 640
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
30General sandblast parts
sanDblasTeRs PPb-346/646/1046 : Rc-176 PRessuRe Release sysTeMeXPlODeD vieW
sanDblasTeRs PPb-346/646/1046 : Rc-176 PRessuRe Release sysTeMeXPlODeD vieW
28a
28a
28b
28c
28b
624
15
254
23 9
21
12
152615
1515
15
21
21
23
11
1416
173222
31
2019
18
5
23
2930
30
10
1
27
13
41
37
36
38
4243
43
10
29
29
4039
8
7
28
PPB 1046
PPB 1046
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
31General sandblast parts
sanDblasTeRs PPb-346/646/1046 : Rc-176 PRessuRe Release sysTeMPaRTs lisT
# StoCK deSCRiPtioN26 630890 uNioN PA 1¼’’
27 608230 dRAiN CoCK vAlve
28 770100 PuSH liNe HoSe ASS’y (28A-B-C)28a 607088 HoSe iNSeRt SWivel 1¼’’28b 607087 douBle Bolt ClAMP28c 770101 PuSH liNe HoSe 30’’ x 1¼’’
29 630805 NiPPle 3’’ x 1¼’’
30 630840 ‘’t’’ 1¼’’ x 1¼’’31 630864 1¼’’ x ¼’’ CouPliNG32 632214 ReduCeR NiPPle ¼’’ x 1/8’’
36
776100Mod.346
50’ x 1’’ HoSe ASS’y C/W FittiNG QCN-NHN 776101 50’ x 1’’ HoSe ASS’y W/o FittiNG776102 50 ‘ HoSe exteNSioN C/W FittiNG QCN-QCN776125 Mod.
646 &
1046
50’ x 1¼’’ HoSe ASS’y C/W FittiNG QCN-NHN776127 50’ 1¼’’HoSe ASS’y W/o FittiNG
776128 50 ‘ HoSe exteNSioN C/W FittiNG QCN-QCN
37607001 QCN - 1’’ QuiCK SNAP FittiNG (346)607011 QCN - 1¼’’ QuiCK SNAP FittiNG (646-1046)
38607018 NHN - 1’’ Nozzle CouPliNG (346)607019 NHN - 1¼’’ Nozzle CouPliNG (646-1046)
39605204 dvC-4 Std. tuNGSt. veNtuRi Nozzle
Model 346
605205 dvC-5 Std. tuNGSt. veNtuRi Nozzle Model 646-1046
40 618016 NW-1 Nozzle WASHeR41 618005 QCN-o QuiCK SNAP FittiNG WASHeR
42 606193 duAl liNe ReMote CoNtRol HoSe 55’ C/W FittiNG
43 908006 PNeuMAtiC deAdMAN CoNtRol HANdle3
# sTOcK DescRiPTiOn
1713000 PReSSuRe veSSel oNly (346)
723000 PReSSuRe veSSel oNly (646)733000 PReSSuRe veSSel oNly (1046)
2610056 ACCeSS dooR Kit (oldeR veRSioN)740102 ACCeSS dooR Kit (lG SeRie)
3618241 ACCeSS dooR GASKet (oldeR veRSioN)740101 ACCeSS dooR GASKet (lG SeRie)
4740001 Axle (Model 346)740002 Axle (Model 646-1046)
5 608821 AiR vAlve Av-1761
6 770070 MMv-175 vAlve ASSeMBly2
7740004 ‘‘o’’ RiNG (oldeR veRSioN)740100 ‘‘o’’ RiNG (lG SeRie)740104 ‘‘o’’ RiNG FoR 10 pi3 (lG SeRie)
8740007 5’’ PluNGeR (oldeR veRSioN)610044 5’’ PluNGeR (lG SeRie)
9 611053 1¼’’ MoiStuRe SePARAtoR10 630884 1¼’’ PluG11 607051 NH-¾’’ AluM. Nozzle HoldeR12 611022 ¼’’ NtP GAuGe13 740006 WHeel14 606003 HoSe ¾’’ SBH
15 630801 1¼’’ NiPPle CloSe
16 630111 NiPPle 6’’ x ¼’’
17 630838 CRoSS 1¼’’18 632214 Hex NiPPle ¼’’ x 1/8’’19 611035 AiR liNe FilteR20 632232 ¼’’ BRASS StReet elBoW21 630851 1¼’’ x 90° elBoW MF
22 632026 1/8’’ BRASS StReet elBoW
23 608105 1¼’’ BAll vAlve24 607075 tANK CouPliNG 1¼’’ NyloN25 631151 2’’ x 1¼’’ ReduCeR
sanDblasTeRs PPb-346/646/1046 : Rc-176 PRessuRe Release sysTeMPaRTs lisT
1See parts details page 322See parts details page 333See parts details page 41
sanDblasTeRs PPb-346/646/1046 : Rc-176 PRessuRe Release sysTeMeXPlODeD vieW
28a
28a
28b
28c
28b
624
15
254
23 9
21
12
152615
1515
15
21
21
23
11
1416
173222
31
2019
18
5
23
2930
30
10
1
27
13
41
37
36
38
4243
43
10
29
29
4039
8
7
28
PPB 1046
PPB 1046
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
32General sandblast parts
sanDblasTeRs PPb-346/646/1046 : Rc-176 PRessuRe Release sysTeMav-176 cOMbineD valve
11
12
6
14
13
16
1521
20
27
29
31
32
3322
23
1
3 2
8
5
10
19
7
1817
34
9
4
30
2628
a
sanDblasTeRs PPb-346/646/1046 : Rc-176 PRessuRe Release sysTeMav-176 cOMbineD valve
# sTOcK cODe DescRiPTiOn
1 770181 CAP
2 770191 PiN
3 770186 PiNCH RAM
4 770184 uPPeR Rod ASS’y , iNClude : iteMS 26, 27, 28, 295 770192 CyliNdeR
6 770187 SPRiNG
7 770188 SHAFt
8 770189 PiStoN
9 770185 loWeR Rod ASS’y , NClude : iteMS 30, 31, 32, 3313 770196 BASe
14 770197 Hex HeAd Bolt
15 770198 FlAt WASHeR
16 770199 Nut
20 770213 FlAt WASHeR
23 770216 exHAuSt FilteR
# sTOcK cODe DescRiPTiOn
10
seal KiT770182
vAlve PluG11 o-RiNG12 BASe
17 o-RiNG
18 exteRNAl CiRCliP
19 PiStoN SeAl (770190)
21 loCK Nut
22 CuRved SPRiNG WASHeR
28 uPPeR Rod SeAl
29 CiRCliP
32 loWeR Rod SeAl
26 770219 uPPeR Rod Guide
27 770220 uPPeR Rod Guide BuSH
30 770223 loWeR Rod Guide
31 770224 loWeR Rod Guide BuSH
32 770225 loWeR Rod SeAl
33 770226 CiRCliP
(34) PluG KiT770183 iNClude : iteMS 11,12, 20, 21, 22
A 608821 Av-176 CoMPlete vAlve ASS’y
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
33General sandblast parts
sanDblasTeRs PPb-346/646/1046 : Rc-176 PRessuRe Release sysTeMMMv-175 abRasive MeTeRinG valve
1
2
3
4
5
67
89
10
b
sanDblasTeRs PPb-346/646/1046 : Rc-176 PRessuRe Release sysTeMMMv-175 abRasive MeTeRinG valve
# sTOcK DescRiPTiOn # sTOcK DescRiPTiOn
1 770069 knOb 6 770076 bODy2 770079 ROll Pin 7 770072 seal3 770078 bOlT c/W WasheR 8 770074 uReThane sleeve4 770077 caP 9 770075 gaskeT5 770073 PlungeR 10 770071 PiPe niPPle 1¼’’ FeM. X 1¼’’ Mal.
B 770070 MMv-175 CoMPlete AiR vAlve ASSeMBly
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
34General sandblast parts
sanDblasTeRs PPb-346/646/1046 : Rc-186 PRessuRe HOlD sysTeMeXPlODeD vieW
sableuses PPb-346/646/1046 : sysTÈMe À PRessiOn cOnTinue Rc-186vue eXPlOsÉe
8
263
6
20
28
24B
24C
24B
31A
24A
24A
29A
25
30
4137
36
3840
39
22
22
9
27
1120
14
2213
18
5
121
42 43
43
16
21
15
15
15
7
15
10
4
17
3123
16
3129
24
21
19
2
10
14
sanDblasTeRs PPb-346/646/1046 : Rc-186 PRessuRe HOlD sysTeMPaRTs lisT
# sTOcK DescRiPTiOn # StoCK deSCRiPtioN
1
713000 PReSSuRe veSSel oNly ( Mod. 346 ) 24 770100 PuSH liNe ASSeMBly (24A-B-C)
723000 PReSSuRe veSSel oNly ( Mod. 646 )
24a 607088 HoSe iNSeRt SWivel 1¼’’
2 610056 ACCeSS dooR Kit 24b 607087 douBle Bolt ClAMP
3 618241 dooR GASKet 24c 770101 PuSH liNe HoSe 30’’ x 1¼’’
4740001 Axel (FoR Model 346) 25 770180 2’’ x 1¼’’ ReduCeR BSt
740002 Axel (FoR Model 646) 26 630838 1¼’’ CouPliNG CRoSS
5 608822 Av-186 AiR vAlve * 27 608230 dRAiN CoCK vAlve
6 608845 PMv-186 vAlve ASSeMBly * * 28 630805 1¼’’ x 3‘‘ PA NiPPle
7 740004 ‘‘o’’ RiNG 29 632018 ‘‘t’’ 1⁄8’’29a 632214 NiPPle ReduCt. ¼’’ x 1/8’’
8 740007 5’’ PluNGeR 30 607075 tANK CouPliNG 1¼’’ NCv9 611053 1¼’’ MoiStuRe SePARAtoR 31 632214 ReduCeR NiPPle ¼’’ x 1⁄8’’
31a 632002 Pl 1/8’’ Hex. NiPPle
10 630840 1¼’’ ‘‘t’’ CouPliNG
36
776100PPB346
50’ x 1’’ HoSe ASS’y C/W FittiNG QCN-NHN 11 630864 1¼‘‘ x ¼’’ CouPliNG 776101 50’ x 1’’ HoSe ASS’y W/o FittiNG12 611022 ¼’’ NtP GAuGe 776102 50 ‘ HoSe exteNSioN C/W FittiNG QCN-NHN 13 740006 WHeel 776125 PPB
646/1046
50’ x 1¼’’ HoSe ASS’y C/W FittiNG QCN-NHN14 630884 1¼‘‘ PluG 776127 50’ 1¼’’HoSe ASS’y W/o FittiNG15 630801 1¼‘‘ NiPPle 776128 50 ‘ HoSe exteNSioN C/W FittiNG QCN-NHN 16 632202 NiPPle ¼’’
37607001 QCN - 1’’ QuiCK SNAP FittiNG (346)
17 632226 StReet ‘‘t’’ ¼’’ 607011 QCN - 1¼’’ QuiCK SNAP FittiNG (646-1046)18 324570 PuSH iN FittiNG 1/8’’
38607018 NHN - 1’’ Nozzle CouPliNG (346)
19 324571 Blue tuBiNG AiR liNe 607019 NHN - 1¼’’ Nozzle CouPliNG (646-1046)20 630805 NiPPle 3’’ x 1¼’’
39605204 dvC-4 Std. tuNGSt. veNtuRi Nozzle Model 346
21 630851 1¼’’ x 90° elBoW MF 605205 dvC-5 Std. tuNGSt. veNtuRi Nozzle PPB 646/104622 608105 1¼’’ BAll vAlve 40 618016 NW-1 Nozzle WASHeR
23 611035 AiR liNe FilteR 41 618005 QCN-o QuiCK SNAP FittiNG WASHeR
42 606193 duAl liNe ReMote CoNtRol HoSe 55’ C/W FittiNG
43 908006 PNeuMAtiC deAdMAN CoNtRol HANdle3
# sTOcK DescRiPTiOn
1713000 PReSSuRe veSSel oNly (346)
723000 PReSSuRe veSSel oNly (646/1046)
2610056 ACCeSS dooR Kit (oldeR veRSioN)740102 ACCeSS dooR Kit (lG SeRie)
3618241 ACCeSS dooR GASKet (oldeR veRSioN)
740101 ACCeSS dooR GASKet (lG SeRie)
4740001 Axle (Model 346)740002 Axle (Model 646/1046)
5 608822 AiR vAlve Av-1861 6 608847 PMv-186 vAlve ASSeMBly2
7740004 ‘‘o’’ RiNG (oldeR veRSioN)740100 ‘‘o’’ RiNG (lG SeRie)740104 ‘‘o’’ RiNG FoR 10 pi3 (lG SeRie)
8740007 5’’ PluNGeR (oldeR veRSioN)610044 5’’ PluNGeR (lG SeRie)
9 611053 1¼’’ MoiStuRe SePARAtoR10 630840 1¼’’ ‘‘t’’ CouPliNG11 630864 1¼‘‘ x ¼’’ CouPliN12 611022 ¼’’ NtP GAuGe13 740006 WHeel14 630884 1¼‘‘ PluG15 630801 1¼’’ NiPPle CloSe
16 632202 NiPPle ¼’’
17 632226 StReet ‘‘t’’ ¼’’ 18 324570 PuSH iN FittiNG 1/8’’19 324571 Blue tuBiNG AiR liNe20 630805 NiPPle 3’’ x 1¼’’21 630851 1¼’’ x 90° elBoW MF
22 608105 1¼’’ BAll vAlve
23 611035 AiR liNe FilteR
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
35General sandblast parts
2See parts details page 373See parts details page 41
1See parts details page 36
sanDblasTeRs PPb-346/646/1046 : Rc-186 PRessuRe HOlD sysTeMPaRTs lisT
sableuses PPb-346/646/1046 : sysTÈMe À PRessiOn cOnTinue Rc-186vue eXPlOsÉe
8
263
6
20
28
24B
24C
24B
31A
24A
24A
29A
25
30
4137
36
3840
39
22
22
9
27
1120
14
2213
18
5
121
42 43
43
16
21
15
15
15
7
15
10
4
17
3123
16
3129
24
21
19
2
10
14
sanDblasTeRs PPb-346/646/1046 : Rc-186 PRessuRe HOlD sysTeMPaRTs lisT
# sTOcK DescRiPTiOn # StoCK deSCRiPtioN
1
713000 PReSSuRe veSSel oNly ( Mod. 346 ) 24 770100 PuSH liNe ASSeMBly (24A-B-C)
723000 PReSSuRe veSSel oNly ( Mod. 646 )
24a 607088 HoSe iNSeRt SWivel 1¼’’
2 610056 ACCeSS dooR Kit 24b 607087 douBle Bolt ClAMP
3 618241 dooR GASKet 24c 770101 PuSH liNe HoSe 30’’ x 1¼’’
4740001 Axel (FoR Model 346) 25 770180 2’’ x 1¼’’ ReduCeR BSt
740002 Axel (FoR Model 646) 26 630838 1¼’’ CouPliNG CRoSS
5 608822 Av-186 AiR vAlve * 27 608230 dRAiN CoCK vAlve
6 608845 PMv-186 vAlve ASSeMBly * * 28 630805 1¼’’ x 3‘‘ PA NiPPle
7 740004 ‘‘o’’ RiNG 29 632018 ‘‘t’’ 1⁄8’’29a 632214 NiPPle ReduCt. ¼’’ x 1/8’’
8 740007 5’’ PluNGeR 30 607075 tANK CouPliNG 1¼’’ NCv9 611053 1¼’’ MoiStuRe SePARAtoR 31 632214 ReduCeR NiPPle ¼’’ x 1⁄8’’
31a 632002 Pl 1/8’’ Hex. NiPPle
10 630840 1¼’’ ‘‘t’’ CouPliNG
36
776100PPB346
50’ x 1’’ HoSe ASS’y C/W FittiNG QCN-NHN 11 630864 1¼‘‘ x ¼’’ CouPliNG 776101 50’ x 1’’ HoSe ASS’y W/o FittiNG12 611022 ¼’’ NtP GAuGe 776102 50 ‘ HoSe exteNSioN C/W FittiNG QCN-NHN 13 740006 WHeel 776125 PPB
646/1046
50’ x 1¼’’ HoSe ASS’y C/W FittiNG QCN-NHN14 630884 1¼‘‘ PluG 776127 50’ 1¼’’HoSe ASS’y W/o FittiNG15 630801 1¼‘‘ NiPPle 776128 50 ‘ HoSe exteNSioN C/W FittiNG QCN-NHN 16 632202 NiPPle ¼’’
37607001 QCN - 1’’ QuiCK SNAP FittiNG (346)
17 632226 StReet ‘‘t’’ ¼’’ 607011 QCN - 1¼’’ QuiCK SNAP FittiNG (646-1046)18 324570 PuSH iN FittiNG 1/8’’
38607018 NHN - 1’’ Nozzle CouPliNG (346)
19 324571 Blue tuBiNG AiR liNe 607019 NHN - 1¼’’ Nozzle CouPliNG (646-1046)20 630805 NiPPle 3’’ x 1¼’’
39605204 dvC-4 Std. tuNGSt. veNtuRi Nozzle Model 346
21 630851 1¼’’ x 90° elBoW MF 605205 dvC-5 Std. tuNGSt. veNtuRi Nozzle PPB 646/104622 608105 1¼’’ BAll vAlve 40 618016 NW-1 Nozzle WASHeR
23 611035 AiR liNe FilteR 41 618005 QCN-o QuiCK SNAP FittiNG WASHeR
42 606193 duAl liNe ReMote CoNtRol HoSe 55’ C/W FittiNG
43 908006 PNeuMAtiC deAdMAN CoNtRol HANdle3
# sTOcK DescRiPTiOn
1713000 PReSSuRe veSSel oNly (346)
723000 PReSSuRe veSSel oNly (646/1046)
2610056 ACCeSS dooR Kit (oldeR veRSioN)740102 ACCeSS dooR Kit (lG SeRie)
3618241 ACCeSS dooR GASKet (oldeR veRSioN)
740101 ACCeSS dooR GASKet (lG SeRie)
4740001 Axle (Model 346)740002 Axle (Model 646/1046)
5 608822 AiR vAlve Av-1861 6 608847 PMv-186 vAlve ASSeMBly2
7740004 ‘‘o’’ RiNG (oldeR veRSioN)740100 ‘‘o’’ RiNG (lG SeRie)740104 ‘‘o’’ RiNG FoR 10 pi3 (lG SeRie)
8740007 5’’ PluNGeR (oldeR veRSioN)610044 5’’ PluNGeR (lG SeRie)
9 611053 1¼’’ MoiStuRe SePARAtoR10 630840 1¼’’ ‘‘t’’ CouPliNG11 630864 1¼‘‘ x ¼’’ CouPliN12 611022 ¼’’ NtP GAuGe13 740006 WHeel14 630884 1¼‘‘ PluG15 630801 1¼’’ NiPPle CloSe
16 632202 NiPPle ¼’’
17 632226 StReet ‘‘t’’ ¼’’ 18 324570 PuSH iN FittiNG 1/8’’19 324571 Blue tuBiNG AiR liNe20 630805 NiPPle 3’’ x 1¼’’21 630851 1¼’’ x 90° elBoW MF
22 608105 1¼’’ BAll vAlve
23 611035 AiR liNe FilteR
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
36General sandblast parts
sanDblasTeRs PPb-346/646/1046 : Rc-186 PRessuRe hOlD sysTeMav-186 aiR valve - eXPlODeD vieW
12
3
4 5
6
78
9
10
11
12
1314
15
16
17
1819
20 21
2223
a
# StoCK Code deSCRiPtioN Qty1 AiR veNt 1
1a CAP 1
2 * o-RiNG 31.5 MM x 2 MM 1
3 CoveR 1
4 * loCK Nut 5/16’’ uNF 1
5 * FlAt WASHeR 8 MM 2
6 FlAt WASHeR 2
7 * diAPHRAGM 1
8 Guide BuSH 1
9 * o-RiNG 45 MM x 3 MM 1
10 * o-RiNG 9 MM x 2.65 MM 1
11 SHAFt 1
12 * FlAt WASHeR 1
13 SeAt HoldeR 1
14 * RuBBeR GASKet 1
# StoCK Code deSCRiPtioN Qty15 RetAiNeR 1
16 * loCK Nut 1/4’’ uNF 1
17 iNNeR BuSH 1
18 * o-RiNG 34MM x 1.8 MM 1
19 Body 1
20 SPRiNG WASHeR 1/4’’ 4
21 Nut 1/4’’ uNC 4
22 Hex HeAd MACHiNe SCReW ¼’’ uNC x 35MM 4
23 SPRiNG 1
A 608822 1¼’’ AiR vAlve Av-186 : CoMPlete vAlve ASS’y
* Service kit available only : 608823 = # 2, 4, 5, 7, 9, 10, 12, 14,16, 18.
sanDblasTeRs PPb-346/646/1046 : Rc-186 PRessuRe hOlD sysTeMav-186 aiR valve - eXPlODeD vieW
12
3
45
6
7
8
9
10
1413
1825
1517
16
1920
22
24
23
21
11
12
b
# StoCK id deSCRiPtioN1 770022 toP
2 770201 ANti-viBRAtioN WASHeR
3 770023 StoP RiNG
4 770024 SPRiNG
5 770213 PiStoN SeAl
6 770202 PluNGeR CoveR
7 770203 NyloN WASHeR
8 770213 PiStoN
9 770204 tuNGSteNe PluNGeR
10 770121 CyliNdeR
11 608830 PluNGeR SeAl C/WitH o-RiNG
12 770030 PluNGeR SeAl C/WitHout o-RiNG
13 770206 BuSH
14 608832 tuNGSteN CARBide Sleeve
# StoCK id deSCRiPtioN
15 608840 uRetHANe SeAt
16 608841 SeAt HoldeR
17 608839 o-RiNG
18 770032 BASe
19 770207 FlAt WASHeR
20 770033 Hex HeAd Bolt
21 770208 exHAuSt FilteR
22 770209 SQuARe HeAd PluG
23 770021 CoNtRol KNoB
24 770034 1 ¼’’ x 1 ¼’’ PiPe NiPPle
25 770211 tuNGSteN SeAt Kit iNClude : #15, 16, 17
26Kit
770210 iNClude iteMS # 5,11,12, 13, 14, ANd 15, 16, 17
B 608847 PMv-186 CoMPlete vAlve ASS’y
sanDblasTeRs PPb-346/646/1046 : Rc-186 PRessuRe hOlD sysTeMPMv-186 abRasive ReGulaTOR valve - eXPlODeD vieW
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
37General sandblast parts
sanDblasTeRs PPb-346/646/1046 : Rc-186 PRessuRe hOlD sysTeMPMv-186 abRasive ReGulaTOR valve - eXPlODeD vieW
12
3
45
6
7
8
9
10
1413
1825
1517
16
1920
22
24
23
21
11
12
b
# StoCK id deSCRiPtioN1 770022 toP
2 770201 ANti-viBRAtioN WASHeR
3 770023 StoP RiNG
4 770024 SPRiNG
5 770213 PiStoN SeAl
6 770202 PluNGeR CoveR
7 770203 NyloN WASHeR
8 770213 PiStoN
9 770204 tuNGSteNe PluNGeR
10 770121 CyliNdeR
11 608830 PluNGeR SeAl C/WitH o-RiNG
12 770030 PluNGeR SeAl C/WitHout o-RiNG
13 770206 BuSH
14 608832 tuNGSteN CARBide Sleeve
# StoCK id deSCRiPtioN
15 608840 uRetHANe SeAt
16 608841 SeAt HoldeR
17 608839 o-RiNG
18 770032 BASe
19 770207 FlAt WASHeR
20 770033 Hex HeAd Bolt
21 770208 exHAuSt FilteR
22 770209 SQuARe HeAd PluG
23 770021 CoNtRol KNoB
24 770034 1 ¼’’ x 1 ¼’’ PiPe NiPPle
25 770211 tuNGSteN SeAt Kit iNClude : #15, 16, 17
26Kit
770210 iNClude iteMS # 5,11,12, 13, 14, ANd 15, 16, 17
B 608847 PMv-186 CoMPlete vAlve ASS’y
sanDblasTeRs PPb-346/646/1046 : Rc-186 PRessuRe hOlD sysTeMPMv-186 abRasive ReGulaTOR valve - eXPlODeD vieW
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
38General sandblast parts
sanDblasTeRs PPb-346/646/1046 : Rc-176/186 cOMbineD sysTeMeXPlODeD vieW
6
4
28b
28b
28c
28a
28a
44
927
32
2020
20
25
14
13
1622
3318
31
1819
19
24
24
1817
5
7
8
1
32
11
15
15
1515
26
30
21
21
21
10
20 29
4242
43
43
41
37
36
3840
39
2823
23
2610 12
See detailspage
See detailspage
a
b
sanDblasTeRs PPb-346/646/1046 : Rc-176/186 cOMbineD sysTeMeXPlODeD vieW
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
39General sandblast parts
# StoCK deSCRiPtioN27 608230 dRAiN CoCK vAlve28 770100 PuSH liNe HoSe ASS’y (28-A-B-C)
28a 607087 SWivel HoSe iNSeRt 1¼‘‘
28b 607088 douBle Bolt ClAMP28c 770101 PuSH liNe HoSe 30’’ x 1¼‘‘29 630838 1¼’’ CouPliNG CRoSS30 608821 Av 176 vAlve ASS’y1 31 630864 1 ¼’’ x ¼’’ CouPliNG32 611035 AiR liNe FilteR33 632232 elBoW ¼’’ x 90° MF
36
776100PPB346
50’ X 1’’ HOSE ASS’Y C/W FITTING QCN-NHN
776101 50’ X 1’’ HOSE ASS’Y W/O FITTING
776102 50 ‘ HOSE EXTENSION C/W FITTING QCN-QCN
776125PPB646/1046
50’ X 1¼’’ HOSE ASS’Y C/W FITTING QCN-NHN
776127 50’ 1¼’’HOSE ASS’Y W/O FITTING
776128 50 ‘ HOSE EXTENSION C/W FITTING QCN-QCN
37607001 QCN - 1’’ QuiCK SNAP FittiNG (346)607011 QCN - 1¼’’ QuiCK SNAP FittiNG (646-1046)
38607018 NHN - 1’’ Nozzle CouPliNG (346)607019 NHN - 1¼’’ Nozzle CouPliNG (646-1046)
39605204 dvC-4 Std. tuNGSt. veNtuRi Nozzle PPB 346605205 dvC-5 Std. tuNGSt. veNtuRi Nozzle PPB 646-1046
40 618016 NW-1 Nozzle WASHeR41 618005 QCN-o QuiCK SNAP FittiNG WASHeR42 606193 duAl liNe ReMote CoNtRol HoSe 55’ C/W FittiNG43 908006 PNeuMAtiC deAdMAN CoNtRol HANdle4
44 607075 tANK CouPliNG 1¼’’ NyloN
# StoCK deSCRiPtioN
1713000 PReSSuRe veSSel oNly (346)
723000 PReSSuRe veSSel oNly (646)733000 PReSSuRe veSSel oNly (1046)
2610056 ACCeSS dooR Kit (oldeR veRSioN)
740102 ACCeSS dooR Kit (lG SeRie)
3618241 ACCeSS dooR GASKet (oldeR veRSioN)
740101 ACCeSS dooR GASKet (lG SeRie)
4740001 Axle (PPB 346)
740002 Axle (PPB 646-1046)5 608822 AiR vAlve Av-1863
6 608847 PMv-186 vAlve ASSeMBly2
7
740004 ‘‘o’’ RiNG (oldeR veRSioN)
740100 ‘‘o’’ RiNG (lG SeRie)
740104 ‘‘o’’ RiNG FoR 10 pi3 (lG SeRie)
8740007 5’’ PluNGeR (oldeR veRSioN)
610044 5’’ PluNGeR (lG SeRie)
9 611053 1¼’’ MoiStuRe SePARAtoR
10 630884 1¼’’ PluG
11 607051 NH-¾’’ AluM. Nozzle HoldeR12 611022 ¼’’ NtP GAuGe13 740006 WHeel14 606003 HoSe ¾’’ SBH
15 630801 1¼’’ NiPPle CloSe
16 630111 NiPPle 6’’ x ¼’’
17 324570 PuSH iN 1/8’’18 632214 AdAPtoR 1/4’’ to 1/8’’
19 632018 tee 1/8’’ FF
20 630805 NiPPle 3’’ x 1¼’’21 630851 1¼’’ x 90° elBoW MF
22 632026 StReet elBoW 1/8’’
23 608105 1¼’’ BAll vAlve24 632002 Hex. NiPPle 1/8’’25 770180 2’’ x 1¼’’ ReduCeR BSt26 630840 tee 1¼’’
sanDblasTeRs PPb-346/646/1046 : Rc-176/186 cOMbineD sysTeMPaRTs lisT
2See parts details page 373See parts details page 364See parts details page 41
1See parts details page 32
sanDblasTeRs PPb-346/646/1046 : Rc-176/186 cOMbineD sysTeMPaRTs lisT
6
4
28b
28b
28c
28a
28a
44
927
32
2020
20
25
14
13
1622
3318
31
1819
19
24
24
1817
5
7
8
1
32
11
15
15
1515
26
30
21
21
21
10
20 29
4242
43
43
41
37
36
3840
39
2823
23
2610 12
See detailspage
See detailspage
a
b
sanDblasTeRs PPb-346/646/1046 : Rc-176/186 cOMbineD sysTeMeXPlODeD vieW
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
40General sandblast parts
sanDblasTeRs PPb-346/646/1046 : Rc-176/186 cOMbineD sysTeMelecTRic ReMOTe cOnTROl bOXes - PaRTs DeTails
120 v
2
2
4 3
5
6
# StoCK deSCRiPtioN
1 608568 sOlenOiD valve
2 324561 90° Pushing FiTTing x 1/8
3 324571 nylOn Tubing (sOlD by FOOT)4 324502 Push-in FiTTing5 324503 Push-in FiTTing x ¼ M6 632202 ¼ heX niPPle
1
# StoCK deSCRiPtioN
A 616075 cOMPleTe bOX ass’y
1 608528 aiR valve Tac 2
2 324561 90° Push-in FiTTing x 1/8
3 324571 nylOn Tubing (sOlD by FOOT)
4 324503 Push-in FiTTing x ¼ M
5 632202 ¼ heX niPPle
6 633214 heX niPPle ¼ x 1/8
7 632050 Plug 1/8 M
2
4
5 6
7
3
1
a
b
sanDblasTeRs PPb-346/646/1046 : Rc-176/186 cOMbineD sysTeMelecTRic ReMOTe cOnTROl bOXes - PaRTs DeTails
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
41General sandblast parts
9
A
7
6 3 4 512
8
B 616068 12 v dC remote control616070 120 v AC remote control
1 616120 electric control handle (Old)1a 770160 electric control handle (actual)2 616101 control body3 616130 complete switch
4616519 extension cable 30’616520 extension cable 55’616522 extension cable 105’
5 616411 electric connector6 616410 electric plug7 616185 electric plug & wire8 617205 Transformer 120-12 volts9 617240 Diode
10 617014 switch e3
11617104 Red light 12 volts617105 green light 12 volts
12 608565 solenoid valve 12 volts nc13 617019 switch protector e314 616105 12 volts clips (pair)15 608284 Muffl er 1⁄8” MPT16 632273 Pl ¼” x 1⁄8” MPT adaptor17 617336 Junction box18 616096 control bracket
PneuMaTic cOnTROl HanDle (‘‘D’’ sHaPe)
elecTRic ReMOTe cOnTROl OPTiOn 12 v Dc / 120 v
A 608800 Complete handle1 608806 Piston2 608808 ‘‘O’’ ring3 608810 Washer4 608809 nut5 608807 spring6 nPn Rubber washer7 608804 Repair kit8 632002 1⁄8” nipple9 632202 ¼” nipple
120v ac
17
17
18
18
5
9
5
5 5 6 6
7
7
11
11
13
13
10
12
12
15
15
16
16
14
14
12v Dc
b 3
14
2
Pages 24-26
Green hose (to 44)Red hose (to 51)
1a
elecTRic cOnTROl HanDle
PneuMaTic cOnTROl HanDle
# sTOcK DescRiPTiOn
1A 770160 Complete electric control handle1 770051 safety level2 770052 spring3 770063 switch4 770054 handle5 770055 base6 770060 shoulder screw
43
2
12
6 5
3
12
4
8
57
6
# sTOcK DescRiPTiOn
1B 908006 Complete pneumatic control handle1
770061 Repair kit for control handle234 770062 safety fl ap5
632214hex. nipple ¼’’ nPT x 1⁄8’’ c/w ball sT
6 hex. nipple 1⁄8’’ nPT x ¼’’ c/w ball sT7 770052 spring8 770060 shoulder screw
1a
1b
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
42General sandblast parts
sanDblasTeR MODel MP101-Rc76
1 608043 AR-7 abrasive regulator
2608302 1’’ diaphragm valve608332 Repair kit
3 608482 A6 Actuator4 608534 Pilot valve tAC3 SMC5 608015 Mini air regulator ¼’’6 611035 Mini filter ¼’’7 611022 ¼’’ pressure gauge8 608202 ½’’ check valve9 608102 ½’’ ball valve
10 607070 tC-½’’ tank coupling11 608104 1’’ ball valve12 607077 CFA-½’’ tank coupling13 610040 M101 plunger14 618205 ''o'' ring M10115 607219 ¼’’ female quick coupling16 607223 ¼’’ male quick coupling17 632281 Pl 1/8” B.F SW. x ¼’’ St adaptor18 632279 Pl ¼’’ Piv. (Swivel) adaptor
19 631163 Reducer PA 2’’ x ½’’20 630327 PA ½’’ cross21 630367 ½’’ union22 632260 Pl ¼’’ union23 630330 ‘‘t’’ PA ½’’ x ½’’ x ¼’’24 630340 PA FF ½’’ @ 90° elbow25 630346 PA ½’’ @ 45° elbow26 630328 ‘‘t’’ PA ½’’27 630605 PA 1’’ x 3’’ nipple28 630630 ‘‘t’’ PA 1’’29 630601 PA 1’’ nipple30 630671 PA 1’’ plug31 630341 PA 90 MF ½’’ elbow32 632202 Hex Pl ¼’’ 122B nipple33 632226 ‘‘t’’ Pl ¼’’ (street)34 632026 1/8” MF elbow35 632214 Hex. Pl reducer ¼’’ to 1/8” nipple36 630651 Reducer PA 1’ ‘ M @ ½’’ F37 630361 ½’’ male plug
38 630351 PA ½’’ x ¼’’ hex bushing39 632232 ¼’’ MF elbow 40 630305 PA ½’’ x 3’’ nipple41 610325 Air hose assembly42 324560 Push-in’’ ¼’’ @ 90 KQl07-35S43 608800 Control handle RC76 63030144 630301 PA ½’’ nipple45 619002 Plastic wheel46 607012 CQA ½’’ quick hose coupling47 606001 SHB ½’’ hose (sold per foot)48 607059 NC3-N3 ½’’ x 1’’ NPt
49 606057 SBH ½’’ x 25’ CQA ½’’ - NCN3 ½’’ hose
50 605303 dC2 F3 standard nozzle51 607040 NA1 nozzle adaptor 1’’ NPt52 606191 double control 30’53 324571 Plastic tube
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
43General sandblast parts
aR-7 abRasive ReGulaTOR
PneuMaTic valves
a6 acTuaTOR
DePRessuRiZaTiOn valve
C 608951 Complete depressurization valve1 324560 Push-in ¼” x 90°2 608488 Retaining collar3 608487 spring4 608994 Tapped cover5 608960 complete plug6 608961 Welded body (#7 included)7 618214 Rc66 lining8 618217 Rubber plug only9 608481 Retaining plate
10 608480 Push rod11 618216 Diaphragm12 608482 complete a6 actuator
Type 66 / 76or
6
9
8
1
2
3 4
10
11
5
1 2
7
Type 70 / 80
A B
C
d
e
A 608482 complete a6 actuator1 324560 Push-in ¼’’ @ 90°2 608488 Retaining collar3 608487 Spring4 608481 Retaining plate5 608480 Push rod6 618216 diaphragm
d
608309 complete 1’’ valve608307 complete 1¼’’ valve608316 Repair kit 1” including # 1-2-3-4-5608317 Repair kit valve 1¼’’ including # 1-2-3-4-5
e608302 complete 1” valve608303 complete 1¼” valve
e1 608332 Repair kit 1” assemblye2 608333 Repair kit 1¼” assembly1 608322 Diaphragm only (1”) 2 608323 Diaphragm only (1¼” )
a6 + Rc66
a6
Rc66
e1 e2
1 2
3
4
5
1(a) port
12(P1) port
10(P2) port
1
2
(shown : 1’’ valve)
Repair kitDiagram
2(b) port
B 608043 complete aR-7 abrasive regulator
1 608047 lower housing2 608039 Regulating screw3 608091 Retaining plate4 608093 handle5 608046 upper housing6 608040 Regulating plate7 608036 Rubber tube8 608037 Pinch roller9 618228 Regulation tube
10 618231 gasket11 608096 bolt kit
sanDblasTeR MODel MP101-Rc76
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
44General sandblast parts
aiR sysTeM
you will find various air filtration systems for supplying a hood blasting. - A set using the carbon filter and activated alumina to remove most oils and condensation, particles, odors and organic vapors questions. A set of 4-step filtration, for removal of oil, dust, odors and water, further including a carbon monoxide detector.
these two assemblies are provided with pressure regulator for supplying blasting hood. they can also be used for one of two grocers hoods blasting. - A breathing air system including pump room air model edP-10 is also available. the pump is activated by a air electric motor with a power of 3/4 hp and 10 cubic feet @ 10 lbs / pc. excellent to provide quality breathing air to the operator.
sandblasting hoodbullard 88vX
Requires 10 cFM
eDP-10ambiant air pump
capacity 10 cFM @ 10 Psi
4-stage filtration systemw/carbon monoxide detector
portable
air purifiercan supply air for
for 2 sandblast hoods
Hose for ambiant air pump
stationary
Hose forhigh-pressure system
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
45General sandblast parts
1 603070 88vX bullard air fed hood, cape & belt
2
613211 nylon cape (standard 28” length)613224 cape length 38”613237 hibernia nylon cape (38” length)
3 613009 RPW6 inner shield (oval 4½ ” x 12 ¾”)4 613010 RPW6 - outer shield (rectangular 5” x 14”)5 913004 RPW6 - outer shield oval (4½” x 14”)6 631234 bh8/bh6 77lc perfor. visor shield (pack of 25)7 613205 Window gasket including seal and visor8 613254 Outer window frame kit
9613132 standard headband suspension613134 Ratchet headband suspension
10 613139 chin strap11 613226 breathing tube only12 613232 F30 ½” belt adaptor13 613229 Flow control valve and adaptor14 613238 bh8/bh30 Fa35 ½” belt adaptor15 613212 belt
16
613144 25’ start hose “isTblast” w/couplings606145 50’ start hose “isTblast” w/couplings606142 50’ extension hose “isTblast” w/coupling606143 100’ extension hose “isTblast” w/coupling603190 50’ - ½” hose w. couplings for ambient air pump603192 100’ - ½” hose w. couplings for ambient air pump
17 613155 ac1000 air cooler hose18 613233 hc2400 adjustable h/c tube
18a 613160 control valve and silencer19 603033 bh3 hood20 613004 shield bh3 4” x 6”21 603035 bh5 hood22 613008 shield bh5 5” x 10 ¼”23 613235 breathing tube connector 88ck24 603510 cold air Tube with MbsP thread & belt
visOR bH3 visOR bH5
1
9
2 19
21
2220
23
16
14
15
12
13
16 24
11
73 84 5 6
bullaRD (88 vX) HOOD bH3-bH5 HOODs
17
18 18a
saFeTy equiPMenT
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
46General sandblast parts
saFeTy equiPMenT (cOnT’D)
nOva 2000 HOOD
8
4
6
5
3
2
7
27
15
18 19
16
17
21
24
25
11 12 13 14 109
23
26
20
22
1
# sTOcK DescRiPTiOn # sTOcK DescRiPTiOn
1 603500 nOva 2000 kiT 15 603521 belT & lOOP
2 603520 nylOn caPe 28 16 603522 aiR inleT kiT
3 603502 inneR shuTTle 17 603515 bReaThing hOse
4 603503 caPe sTRiP 18 603523 aiR bReaTheR hOse 25’ x 3⁄8�’’
5 603517 cOne FOR haT & siDe PaDDing (laRge) 19 603524 50’ bReaThing aiR suPPly hOse, 3⁄8�’’
6 603504 cOne FOR haT 20 603516 FlOW cOnTROl valve WiTh belT
7 603505 siDe PaDDing 21 603519 Quick cOnnecT ¼’’ MnPT
8 603506 Quick cOnnecT 3⁄8’’ MnPT 22 603525 Quick cOnnecT ¼’’ MnPT
9 603507 DOOR seal 23 603538 cOlD aiR Tube WiTh MbsP ThReaD & belT
10 603508 visOR 24 603526 aiR bReaThing hOse 50’ X ½’’
11 603509 bRackeT & nuTss 25 603527 aiR bReaThing hOse 100’ X ½’’
12 603514 inneR visORs (Pack OF 10) 26 603511 hOT aiR Tube WiTh MbsP ThReaD & belT
13 603512 OuTeR visORs (Pack OF 50) 27 603528 FlOW cOnTROl valve ½’’
14 603513 ReMOvable visORs (50 PaQueTs)
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
47General sandblast parts
aP2-c & RaDeX aiR PuRiFieRs
1 613301 Seal2 603047 AP2-C replacement cartridge includes #1-33 613301 Seal4 608230 ¼” MPt drain valve5 613306 Regulation kit6 608220 125 lbs/po2 ¼” MPt safety valve7 611022 ¼” MPt gauge8 608020 ¼” FtP pressure regulator
aP2-c
2
4
7
86
3
15
RaDeX
1
4
3 5
6
5
68
2
11
20
19
21
7
23
16
18
15
22
13
14
12
10
9
17
24
6 outlets
4 outlets
RaDeX aiR PuRiFieR
1
4
3 5
6
5
68
2
11
20
19
21
7
23
16
18
15
22
13
14
12
9
17
24
6 outlets
4 outlets
# sTOcK DescRiPTiOna 603600 RaDeX FilTeR asseMbly
1 603601 Quick Release cOuPleR, FeMale ThReaD, 3/8’’
2 603602 Tee, bRass, 3/8’’
3 603603 caP, bRass, 3/8’’
4 603604 PRessuRe RegulaTOR, less gauge
5 603605 PRessuRe gauge
6 603606 valve, PRess RelieF, 125 Psi, ¼’’ nPT
7 603607 heX niPPle, bRass, 3/8’’
8 603608 FilTeR liD
9 603609 ‘‘O’’- Ring, seT OF 2
10 603050 FilTeR caRTRiDge, FlangeD
11 603611 bOlT, nuT, WasheR, seT OF 4
12 603612 FilTeR bODy
# sTOcK DescRiPTiOn13 603613 DRain TaP, bRass, ¼’’ nPT
14 603614 base MOunT
15 603615 auTO DRain uniT, ¼’’ nPT
16 603616 MicRO MisT FilTeR ½’’ asseMbly
17 603617 ReDucing niPPle, bRass, 1’’ X ½’’
18 603618 elbOW, bRass, ¼’’
19 603619 siX OuTleT FilTeR liD
20 603620 6 OuTleT ManiFOlD
21 603621 cOuPleRs
22 603622 PRessuRe gauge
23 603623 suPeR high FlOW RegulaTOR
24 603624 cOnnecTOR, 1’’ nPT
10
RaDeX aiR PuRiFieR
1
4
3 5
6
5
68
2
11
20
19
21
7
23
16
18
15
22
13
14
12
9
17
24
6 outlets
4 outlets
# sTOcK DescRiPTiOna 603600 RaDeX FilTeR asseMbly
1 603601 Quick Release cOuPleR, FeMale ThReaD, 3/8’’
2 603602 Tee, bRass, 3/8’’
3 603603 caP, bRass, 3/8’’
4 603604 PRessuRe RegulaTOR, less gauge
5 603605 PRessuRe gauge
6 603606 valve, PRess RelieF, 125 Psi, ¼’’ nPT
7 603607 heX niPPle, bRass, 3/8’’
8 603608 FilTeR liD
9 603609 ‘‘O’’- Ring, seT OF 2
10 603050 FilTeR caRTRiDge, FlangeD
11 603611 bOlT, nuT, WasheR, seT OF 4
12 603612 FilTeR bODy
# sTOcK DescRiPTiOn13 603613 DRain TaP, bRass, ¼’’ nPT
14 603614 base MOunT
15 603615 auTO DRain uniT, ¼’’ nPT
16 603616 MicRO MisT FilTeR ½’’ asseMbly
17 603617 ReDucing niPPle, bRass, 1’’ X ½’’
18 603618 elbOW, bRass, ¼’’
19 603619 siX OuTleT FilTeR liD
20 603620 6 OuTleT ManiFOlD
21 603621 cOuPleRs
22 603622 PRessuRe gauge
23 603623 suPeR high FlOW RegulaTOR
24 603624 cOnnecTOR, 1’’ nPT
10
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
48General sandblast parts
a 603116 50 cfm portable filtration kitb 903104 50 cfm stationnary filtration kit1 603117 Replacement filter kit2 603123 Rechargeable battery3 603118 Carbon monoxide detector* 603119 (not illustrated) Calibration kit
4-sTaGe FilTRaTiOn sysTeM
abRasives
eDP-10 PuMP & 4 sTaGe FilTRaTiOn KiT
aluMiniuM OXiDe
MeTal GRiT/sHOT
sHOT GRiT
Widely used as a cutting abrasive. Produces excellent “anchor” or “tooth” patterns in preparation for recoating.
excellent for deburring, frosting glass and lettering stone. it is extremely fast cutting and can be reused many times.
Manufactured from high grade ore and is chemically inert.
Classified in various sizes for a wide selection of finishes..
the most popular type of shot and grit is made from chilled iron. there are two kinds of granules like :
sHOT is a solid round particle causing a peening action and producing a smooth surface. its heavy weight gives greater impact and hammering action for cleaning heavy forgings and removing heat treating scale.
GRiT is angular and like thousands of tiny chisels and cutting tools, does a fast cleaning job. Produces an ideal surface for adherence of new coatings. often the shot and the grit will be mixed to achieve dif ferent finishes.
a b
1 12
3 3
abRasives (cOnT’D)
eDP-10 25
6
8
7
3
4
1 603101 complete eDP-10 pump2 603152 inlet Filter3 603150 Outlet fi lter4 613284 ‘‘O’’ Ring (not illustrated)5 603156 gauge6 603153 Quick connect coupler7 613281 Filter bowl8 603175 service kit (not illustrated)
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
49General sandblast parts
eDP-10 PuMP & 4 sTaGe FilTRaTiOn KiTabRasives (cOnT’D)
PlasTicthis relatively new dust-free abrasive is a special alloy of plastic material that has high tensile, compressive and flexural strength combined with comparatively low hardness.
used for deflashing plastic parts and cleaning molds, dies, electronic connections and circuit boards.
it can effectively deburr marchined iron castings, zinc or aluminum die castings and non-ferrous screw machine parts in addition to deflashing molded plastic parts.
GMa GarnetTM consists of totally natural almandine garnet known for its natural hardness,durability and abrasive characteristics. it is free of any heavy metals or toxic components and meets all Occupational health & safety requirements.
it does not contain metallic iron, which is suitable for all areas of the surface preparation of stainless steel, anti-magnetic steel, and any special alloys.
GMa GaRneTTM
JET MAG synTHeTic Olivine PyROXene sanDs FOR blasT cleaninG
aDvanTaGes :• offers excellent sanding quality and its cost/performance ratio is highly
competitive. it allows either more rapid cleaning and/or reduces consumption of sand.
• Because of its chemical and mineral composition, olimag is a non-toxic material. it thus improves the quality of the work-place for sanders and other construction site employees. less than 1% free silica.
• Reduced dumping charge (less material to dispose of).
Glass beaDsone of the most popular abrasives used in cabinets today. ideal for honing, polishing, peaning, finishing and removing light burrs and foreign matter, such as carbon and surface residue from pistons and valves with no base metal removal or dimensional change.
Produces bright satin finish.
the applications are extensive, due to the wide range of screen sizes available.
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
50General sandblast parts
GLASS BEADS
code Size uS Standardscreen
635003 Bt3 20 - 30635004 Bt4 30 - 40635005 Bt5 40 - 60635006 Bt6 40 - 70635007 Bt7 50 - 80635008 Bt8 60 - 120
635009 Bt9 80 - 120
635010 Bt10 100 - 170635012 Bt12 120 - 270635013 Bt13 170 - 325
LIONBLAST® ALUMINIUM OXIDE
code Grit size uS Standardscreen
Sieve openinginches Millimeters Microns
635101 18 10 - 25 .0787 - .0280 2.00 - 0.71 2000 - 710635105 20 10 - 30 .0787 - .0234 2.00 - 0.59 2000 - 590635104 24 14 - 40 .0555 - .0165 1.41 - 0.42 1410 - 420635108 30 16 - 45 .0469 - .0139 1.19 - 0.35 1190 - 350635106 36 18 - 50 .0394 - .0117 1.00 - 0.297 1000 - 297635107 48 25 - 70 .0278 - .0083 0.71 - 0.210 710 - 210
635109 54 30 - 80 .0232 - .0070 0.59 - 0.177 590 - 177
635110 60 35 - 100 .0197 - .0059 0.50 - 0.149 500 - 149635114 70 40 - 120 .0165 - .0049 0.42 - 0.125 420 - 125635118 80 45 - 140 .0139 - .0041 0.35 - 0.105 350 - 105635120 90 50 - 170 .0117 - .0035 0.297 - 0.088 297 - 88635122 100 60 - 230 .0098 - .0025 0.250 - 0.063 250 - 63635125 120 70 - 270 .0083 - .0021 0.210 - 0.053 210 - 53635131 150 80 - 325 .0070 - .0017 0.177 - 0.044 177 - 44635135 180 100 - 400 .0059 - .0015 0.149 - 0.037 149 - 37635141 220 120 - 30 microns .0049 - .0012 0.125 - 0.030 125 - 30635144 240 140 - 20 microns .0041 - .0008 0.105 - 0.020 105 - 20
bags = 50 lbs Pallet = 40 bags
abRasives - sPeciFicaTiOns Tables
code N° uses
635202 4 à 6Harded rust, deep cavities, boat and bridge reconditioning. Painted or rust steel, premetallization, concrete (decorative aggregates)
635203 2.5 à 4 New steel, structural steel, industrial equipment, weightmachinery, trucks.
635207 2 à 3 New and painted steel light rust, trucks (nozzle 1/8”)
635204 1.5 à 2.5 Cars (body shop), smooth finish, new steel (nozzle 1/8”)
bags = 50 lbs Pallet = 40 bags
bags = 55 lbs Pallet = 56 bags
JET MAG
aiR cOnsuMPTiOn - PRessuRe blasTinG sysTeMs
aiR cOnsuMPTiOn - sucTiOn blasTinG sysTeMs
PRessuRes (by psi / lpc 1)
air jet nozzles 40 50 60 70 80 100 0
1/8’’ ¼’’ 12 15 17 19 21 265/32’’ 5/16’’ 19 23 27 30 34 423/16’’ 3/8’’ 27 33 38 43 48 587/32’’ 7/16’’ 38 46 52 60 65 80¼’’ ½’’ 49 58 67 76 85 94
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
51General sandblast parts
abRasives - sPeciFicaTiOns Tables
bags = 55 lbs Pallet = 40 bags
aiR cOnsuMPTiOn - PRessuRe blasTinG sysTeMs
aiR cOnsuMPTiOn - sucTiOn blasTinG sysTeMs
leGeNd
0 Optimal pressure1 lpc: nozzle pressure in pounds per square inch2 pcm : compressed air volume in cubic feet per minute3 lb/hr : air consumption in pounds per hour
orifice Psi/lpc1 30 40 50 60 70 80 90 1000
1/8’’cfm/ pcm2 8 10 11 13 15 17 19 20
lb/hr3 55 69 84 97 110 127 140 154
3/16’’cfm/ pcm2 18 22 26 30 33 38 41 45
lb/hr3 130 160 170 192 220 243 268 297
1/4’’cfm/ pcm2 34 41 47 54 61 68 74 81
lb/hr3 219 276 302 351 398 460 504 556
5/16’’cfm/ pcm2 53 65 77 89 101 113 126 137
lb/hr3 410 495 526 601 680 756 832 910
3/8’’cfm/ pcm2 76 91 108 126 143 161 173 196
lb/hr3 570 710 750 860 970 1080 1184 1296
7/16’’cfm/ pcm2 100 124 147 170 194 217 240 254
lb/hr3 770 840 1008 1160 1320 1476 1630 1782
1/2’’cfm/ pcm2 137 165 195 224 252 280 309 338
lb/hr3 1015 1230 1305 1500 1700 1890 2088 2277
5/8’’cfm/ pcm2 212 260 308 356 404 452 504 548
lb/hr3 1325 1600 1875 2140 2422 2690 2973 3250
PRessuRes (by psi / lpc 1)
air jet nozzles 40 50 60 70 80 100 0
1/8’’ ¼’’ 12 15 17 19 21 265/32’’ 5/16’’ 19 23 27 30 34 423/16’’ 3/8’’ 27 33 38 43 48 587/32’’ 7/16’’ 38 46 52 60 65 80¼’’ ½’’ 49 58 67 76 85 94
Code GRit Size Sieve oPeNiNG (MeSH)
636108 3040 30/40636107 3060 30/60636118 80 80636125 120 120
GMa GaRneTTM
4160 Industriel Blvd.Laval, QuebecH7L 6H1 Canada
T : 1 877 629-8202F : 450 [email protected] 20
18-1
0-09
ISTblast is a registered trademark of
International Surface Technologies
InternationalSurfaceTechnologies
istsurface.com
The reference in surface TreaTmenT
InternationalSurfaceTechnologies
istsurface.com
vaRiOus accessORies
angular nozzleexcellent for hard to reach places. increases productivity .Saves abrasive.
interior Tube blasting nozzle 4” to 12” i.D.Spinning nozzle for interior cleaning of tubes 4” to 12” i.d. Requires 250 cfm minimum. very effective for large tubes.
sandblast suitsiSt offers a range of superior quality blast suits designed to produce the ultimate protection for workers, while increasing the comfort and productivity. We all know sandblasting can be a very harsh environment and demanding for workers. A properly designed suit for protection will allow workers to move freely and blast safely. .n order to maximize productivity.
leD sandblast lightCan be mounted directly on sandblast hose for direct lighting on surface being clean.
Water adaptor for sandblasting nozzleAdd water to your sandblasting nozzle. Reduces sandblasting dust.
sandblasting nozzle for tube interior 1” to 4” i.D.Special deflector nozzle for inside blasting of tubes from 1” to 4”. Circular projection of abrasive deflection by creating a circular 360 ° cover . Requires 85 CFM minimum.
Water injector nozzleCan be used with your sandblasting equipment. excellent to reduce sanding dust.
917505
604040604041617500