INDUSTRIAL, MILITARY, AND SEVERE DUTY … MILITARY, AND SEVERE DUTY WINCHES AND HOISTS. WARN: ......

IND

US

TR

IAL W

INC

H A

CC

ES

SO

RIE

S

10

WARN CUSTOMER SERVICE: (800) 543-9276

INDUSTRIAL, MILITARY, AND SEVERE DUTY WINCHES AND HOISTS

WARN: BUILT TO WORKIn Clackamas, Oregon, USA, industrial winches and hoists are put together the WARN way. Steel gets

cut here. Winch line is tested, and retested. Welds are precise, clean. Pride, and sweat, goes into

everything that exits our shipping doors. Superior design, innovative engineering and precise quality

controls are the hallmarks of the WARN brand. You’ll find them all throughout these pages.

From tireless hydraulic winches, to efficient electric winches and reliable hoists—they pass our rigorous

tests and standards to make sure they meet global ones. And then perform when you need them most.


Hydraulic Winches .........................................2–11

Electric Winches ..........................................12–17

Military & Severe Duty Winches ..................18–21

Electric and Hydraulic Hoists ......................22–30

Industrial Winch Accessories ......................31–33

1


HYDRAULIC INDUSTRIAL WINCHES

THE TIRELESS WORKERS OF THE WARN LINEUP Year after year, job after job,

you’ll appreciate the reliability that’s packed into every WARN Hydraulic

Winch. Workhorse motors generate the long duty cycles big jobs demand.

Hardened steel, two-stage planetary gear trains add reliable operation

and fast line speeds. All are designed for heavy-duty towing and recovery

operations, and like their electric cousins, these products comply with

world-wide quality and safety standards.

Efficient planetary gear design allows for long-term

lubrication with grease.

Automatic, spring applied disc brake. Highly

reliable and robust. Complies fully with SAE

J706 standard. Easy access and servicing. All internal

components are available as complete

assemblies.

Large drum diameter for longer wire rope life with less kinking. SAE J706

compliment. (Wire rope is sold separately).

Mechanically locked clutch with smooth

action. No springs or jumping out of gear.

Heavy duty, high-flow hydraulic motor.Standard roller tensioner and drum brake provide optimal rope winding.

3

IND

US

TR

IAL H

YD

RA

ULIC

WIN

CH

ES

Whether you’re winching heavier vehicles onto your flat bed, or hauling

wrecks out of ditches, WARN Series XL Winches rise to the top. They form

the core of the hydraulic winch line, with long duty cycles, long or short

drum specs, hardened aircraft grade nickel chromoly two-stage planetary

geartrains and big-time capacity: up to 30,000 lbs.

WARN SERIES XL WINCHES

• 12.0 cubic-inch high-performance motor with 30,000 lbf. capacity – great for trailers, roll-back carriers, and severe- duty applications

• Spring-applied disc brake designed to hold the full-rated load

• Hardened aircraft-grade nickel chromoly two-stage planetary geartrain for speed and reliability

• Available in air and manual clutch options

• Available in standard and long-drum versions

• Meets SAE J706 and CE specifications

PN 77880 (Standard Drum, Manual Clutch) PN 77900 (Standard Drum, Air Clutch)PN 75990 (Long Drum, Air Clutch) PN 77890 (Long Drum, Manual Clutch)

SPECIFICATIONS:

Maximum Pulling Force: 30,000 lbf. (13608 kgs)

Maximum wire rope recommended: 5/8” (15.9 mm); 41,200 lbf. (18,688 kgf) minimum breaking strength

Maximum input flow: 20 USGPM (76 L/min)

Maximum input pressure: 3,000 psi (205.8 bar)

Drum barrel diameter: 6.25” (159 mm)

Drum flange diameter: 13.5” (343 mm)

Distance between flanges, standard drum: 8.0” (203 mm); long drum: 14.0” (356 mm)

Hydraulic motor: 12.0 cu. in. (197 cc)

Gear ratio: 36.0:1

Approximate shipping weight, standard drum: 322 lbs. (146 kg)

Approximate shipping weight, long drum: 361 lbs. (164 kg)

SERIES 30XL FOR HEAVY TOW, UTILITY AND TRAILER APPLICATIONS

• 8.0 cubic-inch high-performance motor with 20,000 lbf. capacity


• Hardened aircraft-grade nickel chromoly two-stage planetary geartrain for speed and reliability

• Available in air and manual clutch options

• Available in standard and long-drum versions


PN 74750 (Standard Drum, Air Clutch)PN 77550 (Standard Drum, Manual Clutch)PN 77560 (Long Drum, Air Clutch)PN 77570 (Long Drum, Manual Clutch)

SERIES 20XL GREAT FOR CARRIERS, TRAILERS, OR SEVERE-DUTY APPLICATIONS

SPECIFICATIONS:

Maximum Pulling Force: 20,000 lbf. (9072 kgf)


Maximum input flow: 20 USGPM (76 L/min)

Maximum input pressure: 3,000 psi (205.8 bar)



Distance between flanges, standard drum: 8.0” (203 mm); long drum: 14.0” (356 mm)


Gear ratio: 28.5:1

Approximate shipping weight, standard drum: 297 lbs. (135 kg)

Approximate shipping weight, long drum: 322 lbs. (146 kg)

5

IND

US

TR

IAL H

YD

RA

ULIC

WIN

CH

ES


PERFORMANCE DATA

At 15 gpm At 20 gpmDrum Rated Line (kgf) (kN) Line speed Line speedLayer Pull (lbf) (ft/min) (m/min) (ft/min) (m/min)1 30000 13608 133.4 13 4.0 18 5.42 25385 11514 112.9 16 4.8 22 6.73 22000 9979 97.9 18 5.5 25 7.64 19412 8805 86.3 21 6.4 29 8.85 17368 7878 77.3 23 7.0 32 9.8

Drum Standard Drum Long Drum Layer Capacity (ft.) (m) Capacity (ft.) (m)1 21 6.2 36 10.92 45 13.6 78 23.93 73 22.2 127 38.84 104 31.8 183 55.75 140 42.6 245 74.6

5/8” (15.9mm) 5/8” (15.9mm)

PERFORMANCE DATA

At 15 gpm At 20 gpmDrum Rated Line (kgf) (kN) Line speed Line speedLayer Pull (lbf) (ft/min) (m/min) (ft/min) (m/min)1 20000 9072 89.0 23 7.1 31 9.52 16975 7700 75.5 27 8.3 37 11.23 14745 6688 65.6 32 9.6 42 12.94 13032 5911 58.0 36 10.9 48 14.65 11676 5296 51.9 40 12.1 54 16.3

Drum Standard Drum Long Drum Layer Capacity (ft.) (m) Capacity (ft.) (m)1 21 6.4 37 11.22 46 13.9 80 24.33 74 22.5 129 39.44 106 32.3 186 56.65 142 43.2 248 75.7

9/16” (14.3mm) 9/16” (14.3mm)

6

IND

US

TR

IAL H

YD

RA

ULIC

WIN

CH

ES

WWW.WARN.COM WARN CUSTOMER SERVICE: (800) 543-9276

• Low Pressure design means these winches use a larger displacement motor to pull full rated load at low psi, making them ideal for hydraulic systems that operate below 3000 psi.

• Choose from 20XL-LP or 30XL-LP models

• 30XL-LP features a 14.9 cubic-inch high-performance motor with 30,000 lb. capacity – great for heavy-duty applications

• 20XL-LP comes with a 11.9 cubic-inch high-performance motor with 20,000 lb. capacity


• Hardened aircraft-grade nickel chromoly two stage planetary geartrain for speed and reliability

• Standard air clutch with manual clutch option

• Available in short- and long-drum versions


PN 78970 (20XL-LP, Standard Drum, Air Clutch)PN 78980 (20XL-LP, Standard Drum, Manual Clutch)PN 79210 (20XL-LP, Long Drum, Air Clutch)PN 79220 (20XL-LP, Long Drum, Manual Clutch)PN 80508 (30XL-LP, Standard Drum, Air Clutch)PN 80509 (30XL-LP, Standard Drum, Manual Clutch)PN 80510 (30XL-LP, Long Drum, Air Clutch)PN 80511 (30XL-LP, Long Drum, Manual Clutch)

SERIES XL-LP WINCHES FOR SYSTEMS THAT OPERATE BELOW 3000 PSI

• Double the speed of the Series XL winch for fast rope retrieval

• Increased productivity improves your bottom line

• 12V solenoid on the winch manifold shifts the winch from high-speed to low-speed

• Choose from standard or low-pressure system design - Standard 12.0 cubic-inch motor is great for trailers,

roll-back carriers, and severe-duty applications - Low pressure 14.9 cubic-inch high-performance motor

is perfect for extra heavy-duty applications


• Hardened aircraft-grade nickel chromoly two stage planetary geartrain for speed and reliability

SERIES XL 2-SPEED

FAST NO-LOAD LINE RETRIEVAL


• See warn.com for full performance specifications

PN 81617 (30XL, Long Drum, Air Clutch, Low-pressure)PN 82710 (30XL, Long Drum, Air Clutch) PN 91159 (20XL, Long Drum, Air Clutch, Low-pressure)

See warn.com for more detailed product specifications

PERFORMANCE DATA BY LAYER (81617) - 5/8” (15.9 mm) dia. ropeDrum Line Load Line Speed 15 GPM Line Speed 20 GPM DrumLayer Hi-Speed/Low-Speed Hi-Speed/Low-Speed Hi-Speed/Low-Speed Capacity lbf kgf ft/min m/min ft/min m/min ft m

1 15000/30000 13608/6804 21.6/10.8 6.6/3.3 29.3/14.7 8.9/4.5 36 11.02 12692/25385 11514/5757 25.6/12.8 7.8/3.9 34.7/17.3 10.6/5.3 78 23.83 11000/22000 9979/4990 29.5/14.8 9.0/4.5 40.0/20.0 12.2/6.1 127 38.74 9706/19412 8805/4403 33.4/16.7 10.2/5.1 45.3/22.7 13.8/6.9 183 55.85 8684/17368 7878/3939 37.4/18.7 11.4/5.7 50.7/25.3 15.5/7.8 245 74.7

FIRST LAYER PERFORMANCE (81617)Low Speed at 20GPM Hi Speed at 20GPM lbf kgf psi BAR lbf kgf psi BAR

0 0 335 23.1 0 0 370 25.57500 3402 698 48.1 3750 259 756 52.115000 6804 1060 73.1 7500 517 1142 78.722500 10206 1430 98.6 11250 776 1527 105.330000 13608 1790 123.4 15000 1034 1913 131.9

PERFORMANCE DATA BY LAYER (82710) - 5/8” (15.9 mm) dia. ropeDrum Line Load Line Speed 15 GPM Line Speed 20 GPM DrumLayer Hi-Speed/Low-Speed Hi-Speed/Low-Speed Hi-Speed/Low-Speed Capacity lbf kgf ft/min m/min ft/min m/min ft m

1 15000/30000 13608/6804 27.2/13.6 8.3/4.1 36.7/18.4 11.2/5.6 36 11.02 12692/25385 11514/5757 32.1/16.1 9.8/4.9 43.4/21.7 13.2/6.6 78 23.83 11000/22000 9979/4990 37.1/18.5 11.3/5.6 50.1/25.0 15.3/7.6 127 38.74 9706/19412 8805/4403 42.0/21.0 12.8/6.4 56.7/28.4 17.3/8.7 183 55.85 8684/17368 7878/3939 47.0/23.5 14.3/7.2 63.4/31.7 19.3/9.7 245 74.7

FIRST LAYER PERFORMANCE (82710)Low Speed at 20GPM Hi Speed at 20GPMlbf kgf psi BAR lbf kgf psi BAR

0 0 319 22.0 0 0 337 23.27500 3402 822 56.7 3750 259 840 57.915000 6804 1324 91.3 7500 517 1342 92.522500 10206 1826 125.9 11250 776 1844 127.130000 13608 2329 160.6 15000 1034 2346 161.8

See warn.com for more detailed product specifications

PERFORMANCE DATA (30XL-LP) Standard Drum

Line Load Line Speed 15 GPM Line Speed 15 GPM Drum Capacity Layer lbf.(kgf) ft/min. (m/min.) ft/min. (m/min.) ft (meters)1 30000 (13608) 11.5 (3.5) 14.9 (4.5) 20 (6.1)2 25385 (11514) 13.6 (4.1) 17.5 (5.3) 44 (13.4)3 22000 (9979) 15.7 (4.8) 20.2 (6.2) 72 (21.9)4 19412 (8805) 17.8 (5.4) 22.9 (7.0) 104 (31.7)5 17368 (7878) 20.0 (6.1) 25.5 (7.8) 140 (42.7)

PRESSURE DROP – FIRST LAYER OF DRUM (30XL-LP)

Line Load Pressure Drop @ 15 GPM Pressure Drop @ 20 GPM lbf psi / bar psic /cbar0 840 / 57.9 995 / 68.67500 1020 / 70.3 1308 / 90.215000 1475 / 101.7 1660 / 114.522500 1900 / 131.0 2025 / 139.630000 2625 / 181.0 2450 / 168.9

PRESSURE DROP – FIRST LAYER OF DRUM

Line Load PSI BAR lbf (kgf)0 162 11.23000 (1361) 400 27.66000 (2722) 663 45.79000 (4082) 930 64.112000 (5443) 1196 82.515000 (6804) 1546 106.618000 (8165) 1816 125.2

• For tow, utility and trailer applications

• 7.3 cubic-inch hydraulic motor

• Hardened steel two-stage planetary geartrain with 36:1 reduction provides fast line speed

• Heavy-duty disc brake for dependable operation and plenty of holding power


PN 74125 (Anti-clockwise)

8

SERIES 18 HYDRAULIC PULLING POWER UP TO 18,000 LBF.

PERFORMANCE DATA

Line Load Line Speed Wire Rope Capacity Layer lbf.(kgf) ft/min. (m/min.) ft (meters)1 18000 (8165) 14.9 (4.5) 21 (6.4)2 14727 (6680) 18.2 (5.5) 46 (14.0)3 12462 (5652) 21.5 (6.6) 75 (22.9)

1/2” (12.7mm)

SPECIFICATIONS:



Maximum input flow: 15 USGPM (57 L/MIN)

Maximum input pressure: 2400 psi (165 bar)



Distance between flanges: 9.95” (253 mm)


Gear ratio: 36:1

Approximate shipping weight: 82 lbs. (37 kg)

Standards compliance: SAE J706, CE Compliant

• 6.0 cubic-inch motor provides pulling capacity up to 15,000 lbf.

• Hardened steel two-stage planetary geartrain with 36:1 reduction provides fast line speed

• Heavy-duty disc brake for dependable operation and plenty of holding power

• Meets SAE J706 and CE standards

PN 65931 (Anti-clockwise)

PERFORMANCE DATA

Line Speed at 1/2” (12.7mm) Line Pull 15 GPM (57 l/min in) Wire Rope Capacity Layer lbf. (kgf) ft/min. (m/min.) ft (m)1 15000 (6804) 18.9 (5.8) 21 (6.4)2 12273 (5567) 23.1 (7.0) 46 (14.0)3 10385 (4711) 27.3 (8.3) 75 (22.9)


Line Pull PSI BAR lbf. (kgf) 0 362 25 3000 (1361) 662 45.8 6000 (2722) 1003 69.2 9000 (4082) 1379 95.1 12000 (5443) 1790 123.415000 (6804) 2200 151.7

SERIES 15 PULLING CAPACITY UP TO 15,000 LBF.

SPECIFICATIONS:


Maximum wire rope recommendation: 1/2” (12.7 mm); 26,600 lbf. (12,066 kgf) minimum breaking strength


Maximum input pressure 2200 psi (152 bar)




Hydraulic Motor: 6.0 cu. in. (100 cc)

Gear ratio: 36:1

Approximate shipping weight: 83 lbs. (37.6 kg)


8

IND

US

TR

IAL H

YD

RA

ULIC

WIN

CH

ES

WWW.WARN.COM WARN CUSTOMER SERVICE: (800) 543 9276

9

• Pulling capacity up to 12,000 lbf.

• Hardened steel, two-stage planetary geartrain provides faster line speeds

• Heavy-duty automatic disc brake provides dependable operation


PN 30285 (Anti-clockwise, 4.8) PN 30286 (Clockwise, 4.8) PN 32080 (Long Drum, Anti-clockwise, 4.8) PN 32081 (Long Drum, Clockwise, 4.8)

PERFORMANCE SPECS

Line Speed at 7/16” (11.1 mm) Line Pull 15 GPM (57 l/min in) Wire Rope Capacity Layer lbf. (kgf) ft/min. (m/min.) ft (m)1 12000 (5443) 21.8 (6.6) 23 (7.0)2 10023 (4546) 26.1 (8.0) 51 (15.5)3 8606 (3904) 30.4 (9.3) 84 (25.6)4 7739 (3420) 34.7 (10.6) 121 (36.9)


Line Pull PSI BAR lbf. (kgf) 0 300 21 4000 (1818) 805 56 8000 (3636) 1310 90 12000 (5455) 1820 126

SPECIFICATIONS:


Maximum wire rope recommended: 1/2” (12.7 mm); 20,400 lbf. (9253 kgf) minimum breaking strength







Gear ratio: 36:1

Approximate shipping weight: 86 lb. (39 kg)


SERIES 12 PERFECT FOR MOST TOW, UTILITY AND TRAILER APPLICATIONS

IND

US

TR

IAL D

C E

LE

CTR

IC W

INC

HE

S

11


IND

US

TR

IAL H

YD

RA

ULIC

WIN

CH

ES

10

WWW.WARN.COM

PERFORMANCE DATA

Line Speed at 5/16” (8 mm) Line Pull 15 GPM (57 l/min in) Wire Rope Capacity Layer lbf. (kgf) ft/min. (m/min.) ft (meters)1 6000 (2727) 32 (9.8) 18 (5.5)2 4910 (2232) 39 (11.9) 41 (12.5)3 4150 (1886) 46 (14.1) 68 (20.7)4 3600 (1636) 53 (16.2) 99 (30.2)


Line Pull PSI BAR lbf. (kgf) 0 343 23.6 2000 (909) 777 53.6 4000 (1818) 1222 84.3 6000 (2722) 1693 116.7

• Popular winch for tow, utility and trailer applications


• Rugged dual-cone brake provides dependable control


PN 33445 (Anti-clockwise)PN 33446 (Clockwise)

SPECIFICATIONS:









Gear ratio: 26:1



SERIES 6 WINCHING CAPACITY UP TO 6,000 LBF.

• Perfect for tow, utility and trailer applications


• Heavy-duty automatic disc brake provides dependable operation

• Available in two motor sizes: 4.9 cu. in. and 3.0 cu. in.


PN 30281 (Anti-clockwise, 4.9) PN 30282 (Clockwise, 4.9) PN 30279 (Anti-clockwise, 3.0)

SPECIFICATIONS:



Hydraulic Motor: 3.0 cu. in. (50 cc), or 4.9 cu. in. (80 cc)

Maximum input flow, 3.0 cu. in. motor: 15 USGPM (57 L/MIN)

Maximum input flow, 4.9 cu. in. motor: 15 USGPM (57 L/MIN)





Gear ratio: 27:1



PERFORMANCE DATA – 4.9 CU IN MOTOR

Line Speed at 3/8” (9.5 mm) Line Pull 15 GPM (57 l/min in) Wire Rope Capacity Layer lb. (kgf) ft/min. (m/min.) ft (meters)1 9000 (4082) 28.5 (8.7) 25 (7.6)2 7364 (3340) 34.1 (10.4) 54 (16.5)3 6231 (2826) 39.8 (12.1) 88 (26.8)4 5400 (2449) 45.4 (13.8) 126 (38.4)


Line Pull PSI BAR lbf. (kgf) 0 358 24.7 3000 (1361) 887 61.1 6000 (2722) 1405 96.9 9000 (4082) 2027 139.8

SERIES 9 DEPENDABLE WORKHORSE WITH 9,000 LBF. OF PULLING POWER

IND

US

TR

IAL D

C E

LE

CTR

IC W

INC

HE

S

12

WWW.WARN.COM WARN CUSTOMER SERVICE: (800) 543-9276

DC Electric Planetary Gear Winches

RELIABILITY, BUILT IN When its all on the line, you need a winch you

can trust. WARN has been crafting durable, reliable electric winches

for decades. All feature heavy-duty 12V or 24V series wound industrial

motors and hardened steel, three-stage planetary geartrains. Their

job is to put out reliable performance, pull after pull. Whether you’re

manning a fire truck, or winching from a city utility vehicle, count on

WARN industrial planetary winches—they comply with world’s most

stringent standards: including SAE J706 and NFPA.

Heavy-duty 12V or 24V

series wound motor

Heavy-duty, industrial contactor control pack is sealed and weather resistant. Reliable

silver contacts handle high amps and allow for higher duty cycle

Weather-proof Industrial quality remote with 32’ (10m) twist-on connector

Hardened steel, 3-stage planetary geartrain for efficient

and reliable operation

Automatic, self-locking disc brake. Highly reliable and robust. Complies fully with SAE J706 standard,

up to 18,000 lbf. capacity

Mechanically locked clutch allows free-

spooling of winch rope

Large 4 inch drum diameter for longer winch rope life with less kinking. SAE J706 compliant

IND

US

TR

IAL D

C E

LE

CTR

IC W

INC

HE

S

13

IND

US

TR

IAL D

C E

LE

CTR

IC W

INC

HE

S

14

WWW.WARN.COM

IND

US

TR

IAL D

C E

LE

CTR

IC W

INC

HE

S

15


PERFORMANCE DATA – BY ROPE LAYER

No Load Layer Line Pull Line Speed 1/2” Wire Rope lbf. (kgf) ft. min. (m/min.) Capacity ft. (m)1 18000 (8182) 18.5 (5.6) 20 (6.1)2 14754 (6706) 22.2 (6.8) 45 (13.7)3 11827 (5376) 26.7 (8.1) 75 (22.4)


No Load No Load Layer Line Pull 12V Line Speed 24V Line Speed 1/2” Wire Rope lbf. (kgf) ft/min (m/min) ft/min (m/min) Capacity ft. (m)1 15000 (6804) 16.1 (4.9) 15.4 (4.7) 20 (6.1)2 12295 (5567) 19.6 (6.0) 18.9 (5.8) 45 (13.7)3 10417 (4711) 23.2 (7.1) 22.3 (6.8) 75 (22.9)

• Dependable high-torque series-wound 24V DC electric motor

• Weatherproof industrial contactor control pack

• Rugged 32’ (10 m) industrial remote control

• SAE J706-compliant disc brake designed for extended power-out use

• Thermal protection device protects motor from overheating

PN 72005 (24V Motor)

SPECIFICATIONS:






Contactor: Industrial contactor with 32’ (10 m) heavy-duty remote control


Gear ratio: 315:1

Motor: 24 volt DC series-wound heavy-duty

Standards compliance: SAE J706, NFPA 1901-73, CE Compliant

• Dependable high-torque series-wound electric motor, available in 12 or 24V configurations







SPECIFICATIONS:


Maximum wire rope recommendation: 1/2” (12.7 mm); 26,600 lbf. (12,066 kgf) min. breaking strength






Gear ratio: 315:1

Motor: 12 or 24 volt DC series-wound heavy-duty


PERFORMANCE DATA – FIRST LAYER

Line Load Line Speed Motor Current lbf. (kgf) ft/min (m/min) amps 0 (0) 18.5 (5.6) 58.1 3000 (1361) 11.0 (3.4) 104.0 6000 (2722) 8.6 (2.6) 137.8 9000 (4082) 7.1 (2.2) 169.4 12000 (5443) 6.0 (1.8) 209.7 15000 (6804) 4.9 (1.5) 253.2 18000 (8165) 4.6 (1.4) 278.2

PERFORMANCE DATA – FIRST LAYER OF DRUM

Duty Cycle Line Load 12V Line Speed 24V Line Speed Motor Current min/10 min lbf. (kgf) ft/min (m/min) ft/min (m/min) 12V(24V) 12V(24V)0 16.1 (4.9) 15.4 (4.7) 111 (49) 6.2 (5.5)3000 (1361) 13.0 (4.0) 12.6 (3.8) 216 (101) 2.3 (2.1)6000 (2722) 9.6 (2.9) 9.8 (3.0) 302 (141) 1.4 (1.4)9000 (4082) 8.0 (2.4) 8.0 (2.4) 390 (181) 1.1 (1.1)12000 (5443) 6.0 (1.8) 6.5 (2.0) 477 (214) 1.0 (0.9)15000 (6804) 5.2 (1.6) 5.5 (1.7) 561 (264) 0.8 (0.8)

SERIES 18 DC

HEAVY PULLING POWER UP TO 18,000 LBF.

SERIES 15 DC

12 OR 24V ELECTRIC WINCH PULLS UP TO 15,000 LBF.


No Load No Load Layer Line Pull 12V Line Speed 24V Line Speed 7/16” Wire Rope lbf. (kgf) ft/min (m/min) ft/min (m/min) Capacity ft. (m)1 12000 (5443) 17.7 (5.4) 18.1 (5.5) 23 (7.0)2 10024 (4547) 21.1 (6.4) 21.6 (6.6) 51 (15.5)3 8606 (3904) 24.6 (7.5) 25.2 (7.7) 84 (25.6)4 7540 (3420) 28.1 (8.6) 28.7 (8.7) 121 (36.9)


No Load No Load Layer Line Pull 12V Line Speed 24V Line Speed 3/8” Wire Rope lbf. (kgf) ft/min (m/min) ft/min (m/min) Capacity ft. (m)1 9000 (4082) 26 (7.9) 31.3 (9.5) 25 (7.6)2 7518 (3410) 31.1 (9.5) 37.4 (11.4) 54 (16.5)3 6455 (2928) 36.3 (11.1) 43.6 (13.3) 88 (26.8)4 5655 (2565) 41.4 (12.6) 49.8 (15.1) 126 (38.4)








SPECIFICATIONS:







Gear ratio: (12 volt model) 315:1, (24 volt model) 261:1







• Higher gear ratio for fastest line speed





SPECIFICATIONS:







Gear ratio: 199:1





Duty Cycle Line Load 12V Line Speed 24V Line Speed Motor Current min/10 min lbf. (kgf) ft/min (m/min) ft/min (m/min) 12V(24V) 12V(24V)0 17.7 (5.4) 18.1 (5.5) 105 (49) 3.8 (5.6)4000 (1814) 7.7 (2.3) 12.2 (3.7) 219 (125) 1.5 (1.6)8000 (3629) 4.7 (1.4) 9.3 (2.8) 319 (189) 1.0 (1.0)12000 (5443) 2.9 (0.9) 7.0 (2.1) 419 (245) 0.7 (0.8)


Duty Cycle Line Load 12V Line Speed 24V Line Speed Motor Current min/10 min lbf. (kgf) ft/min (m/min) ft/min (m/min) 12V(24V) 12V(24V)0 26(7.9) 31.3 (9.5) 101 (54) 4.1 (4.8)3000(1361) 12.8 (3.9) 15.3 (4.7) 233 (120) 1.4 (1.7)6000(2722) 5.5 (1.7) 10.4 (3.2) 363 (185) 0.9 (1.0)9000(4082) 2.9 (0.9) 8.1 (2.5) 486 (238) 0.6 (0.8)

SERIES 12 DC

INDUSTRIAL ELECTRIC WINCH PULLS UP TO 12,000 LBF.

SERIES 9 DC INDUSTRIAL GRADE WINCH PULLS UP TO 9,000 LBF.

IND

US

TR

IAL W

INC

H A

CC

ES

SO

RIE

S

10


IND

US

TR

IAL D

C E

LE

CTR

IC W

INC

HE

S

16

WWW.WARN.COM

WARN SPYDURA PRO AND SPYDURA PROMAX EQUIPPED ELECTRIC WINCHES

READY-TO-MOUNT WINCHES, ENGINEERED SPECIFICALLY FOR USE WITH SYNTHETIC ROPE

The WARN Series 9, 12, and 15 Industrial DC winches are now available with the all-new WARN Spydura® Pro and Spydura ProMax synthetic rope. Spydura Pro and Spydura ProMax rope is designed specifically for an industrial winch’s specialized applications. The rope is lighter weight, features improved strength, and is easier to handle than wire rope.

Spydura Pro features a urethane coating, a 20 ft. Nomex heat sleeve, and a 12-strand standard braid. Spydura ProMax wears a urethane blend coating, features a Nomex/Dyneema heat sleeve, wears a full-length Dyneema® cover, and has a special six-strand low-angle braid for uncompromised strength.

These new winches also feature a specialized drum and fairlead designed specifically for use with the Spydura Pro and Spydura ProMax rope.

PN 91033 Series 9-S ProMax PN 91034 Series 9-S ProPN 91043 Series 12-S ProMax PN 91044 Series 12-S ProPN 91053 Series 15-S ProMax PN 91054 Series 15-S Pro

Spydura ProMax has a full-length woven cover over a special six-strand low-angle fiber braid

Spydura Pro features a 12-strand braid, heat treated under tension

IND

US

TR

IAL S

EV

ER

E D

UTY

WIN

CH

ES

16

WWW.WARN.COM

MILITARY SEVERE DUTY WINCHES

PROVEN IN TESTING, AND IN THE TRENCHES Severe duty situations demand

the winches that are proven in equally harsh conditions. WARN Military

Winches feature contactors and motors that are potted in a two-part

silicone compound. Result: total protection from water intrusion, and

dependable operation in up to six feet of water. A high grade, chemical

resistant finish offers the ultimate in corrosion resistance. Powerful DC

electric motors have thermal protection and an overload interrupt switch for

the durability you demand.

EXTREME SEALING Sealing at motor and gear housing joints keeps water

and contaminants out

OVERLOAD INTERRUPT Programmable digital OLI

module limits the maximum pulling power

INDUSTRIAL CONTACTOR Durable, reliable, and can handle up to 800

amps (12V) or 400 amps (24V). Potted assembly provides total protection from water infiltration

PLANETARY GEAR TRAIN

Hardened steel, 3-stage planetary

gear train is proven to be the most reliable, efficient and durable

design under the worst conditions in the world

DISC BRAKE Unique patented dual disc brake is quiet and reliable. Designed for

SAE J706 compliance to 18,000 lbs. (8165kg)

DRUM SEALS Double lip, springloaded

drum seals provide the ultimate in dirt and

moisture exclusion

SERIES-WOUND MOTOR High torque series-

wound DC electric motor provides powerful,

reliable pulling power

CORROSION RESISTANT

FINISH Options include

CARC or powdercoating

IND

US

TR

IAL M

ILIT

AR

Y /

SE

VE

RE

DU

TY

WIN

CH

ES

19


IND

US

TR

IAL M

ILIT

AR

Y /

SE

VE

RE

DU

TY

WIN

CH

ES

21


IND

US

TR

IAL M

ILIT

AR

Y /

SE

VE

RE

DU

TY

WIN

CH

ES

20

WWW.WARN.COM

• 24 volt DC electric-powered winch is rated to pull 18,000 lbf. (8,165 kgf) pull rating

• Waterproof construction

- Silicone sealing at all motor and gear housing joints

- Double lip, spring sealing at drum supports

- Contactor and motor are potted in a two-part silicone compound and sealed

• Superior corrosion resistance:

- E-coat, CARC coating provides maximum chemical resistance

- Stainless steel fasteners

• 4.5hp high-torque series-wound motor

• 3-stage planetary geartrain

• Includes thermal protection switch and Overload Interrupt (OLI) module

• Automatic heavy-duty brake

• Industrial contactor and remote control

• Available with EIPS wire rope – see web for specs

SEVERE DUTY 18 24V ELECTRIC SELF RECOVERY WINCH• 24V DC electric-powered

• Waterproof construction: - Silicone sealing at all motor and gear housing joints - Double lip, spring sealing at drum supports - Contactor and motor are sealed and potted in a two-part silicone compound

• Superior corrosion resistance: - E-coat and CARC coating provide maximum chemical resistance - Stainless steel fasteners

• 4.5hp high-torque series-wound motor

• 3-stage planetary geartrain

• Includes thermal protection switch and Overload Interrupt (OLI) module

• Automatic heavy-duty brake

• Industrial contactor and remote control

• Available with EIPS wire rope – see web for specs

SEVERE DUTY 12 BUILT TO STRINGENT STANDARDS

See WARN.com for performance data.

SPECIFICATIONS:


Maximum wire rope recommendation: 1/2” (2.7 mm)

Drum barrel diameter: 4” (101.6 mm)

Drum flange diameter: 8.24 inches (209.3 mm)

Distance between flanges: varies by model – see web for full specs

Contactor: Industrial type

Gear ratio: 315:1

Approximate shipping weight (with rope): 175 lbs. (79 kg)

Standards compliance: MIL-STD-339, sec 800, 3.2.2, 3.2.3; MIL-STD-1184, Type III, Class 1, test method 100 - waterproofing; SAE J706; CE Machinery Directive 98/37/EEC and 2006/42/EC; CE EMC Directive 2004/108/EC; ASTM B117- 408 hours, Corrosion rating per ASTM D1654

Part numbers: Contact Warn Industries Customer Service forApplication Assistance

SPECIFICATIONS:

Maximum Pulling Force: 12,000 lbf. (5,443 kgf)




Industrial contactor with 12’ (3.65 m) heavy-duty remote control

Gear ratio: 315:1


Standards compliance: MIL-STD-339, sec 800, 3.2.2, 3.2.3; MIL-STD-1184, Type III, Class 1, test method 100 - waterproofing; SAE J706; CE Machinery Directive 98/37/EEC and 2006/42/EC; CE EMC Directive 2004/108/EC; ASTM B117- 408 hours, Corrosion rating per ASTM D1654

OFF

RO

AD

PR

OD

UC

TS

TR

UC

K &

AU

TO

WIN

CH

ES

20

PLANETARY GEAR HOISTS

RELIABLE WARN HOISTS RISE TO THE CHALLENGE If you need optimum

power in lifting operations, look no further. WARN Industrial hoists

combine the performance of heavy-duty motors with hardened steel

planetary geartrains to provide lift assists you can count on. WARN DC

electric hoists are available with 12V and 24V motors, while hydraulic

hoists work with all hydraulic systems. All WARN hoists comply with

tough global quality standards.

ALUMINUM DRUM Large diameter one-piece cast aluminum drum with integral rope anchor.

Provides longer wire rope life with less kinkingPLANETARY GEARTRAIN Hardened steel, planetary

geartrain for efficient, reliable, and maintenance-

free operation

AUTOMATIC CONE BRAKE Smooth operating load brake for careful, controlled load lowering.

Highly reliable and robust

REMOTE CONTROL Weather-proof Industrial quality remote with twist-on connector

(sold separately)

CONTROL PACK Heavy-duty, industrial contactor control pack with dynamic braking. Contactor is sealed and weather

resistant. Reliable silver contacts handle high amps and allow for higher duty cycle (sold separately)


IND

US

TR

IAL H

OIS

TS

23


Duty Cycle Line Load Current Draw Amps 12 V Line Speed 24 V Line Speed min/10 min lbf. (kgf) 12 V (24 V) ft./min. (m/min.) ft./min. (m/min.) 12 V (24 V)0 (0) 89 (70) 27.5 (8.4) 34.0 (10.4) 6.5 (3.1)1000 (454) 132 (100) 19.3 (5.9) 27.1 (8.3) 3.5 (2.7)2000 (907) 176 (133) 15.0 (4.6) 21.7 (6.6) 2.5 (2.3)3000 (1361) 215 (162) 12.6 (3.8) 18.5 (5.6) 1.9 (1.9)4000 (1814) 257 (195) 10.8 (3.3) 16.4 (5.0) 1.5 (1.5)

• Powerful series wound DC motor with robust sealing

• Proven 3-stage planetary geartrain

• Permanent grease lubrication

• Automatic disk brake that holds full rated load

• Large frame with a cast aluminum drum for plenty of wire rope capacity

• Controls and remote sold separately

PN 89833 (12V) PN 90124 (24V)

SPECIFICATIONS:

Rated Capacity: 4,000 lbf. (1,814 kgf)






Gear reduction: 315

Motor: Series Wound, DC Electric

Standards compliance: CE Machinery Directive 98/37/EC and 2006/42/EC; CE Electromagnetic Compatibility 2004/108/EC; ASME B30.5

• Powerful permanent magnet DC motor with robust sealing



• Automatic cone brake that holds full rated load



PN 74396 (12V) PN 78355 (12V CCW) PN 85161 (24V)


12 V No Load 24 V No Load Drum Line Load Line Speed Line Speed Drum Capacity Layer lbf. (kgf) [kN] ft./min. (m/min.) ft./min. (m/min.) ft. (m)1 4000 (1814) [17.8] 27.5 (8.4) 34.0 (10.4) 25 (7.6)2 3601 (1633) [16.0] 30.5 (9.3) 37.8 (11.5) 53 (16.2)3 3275 (1486) [14.6] 33.6 (10.2) 41.5 (12.6) 83 (25.3)

DC4000 DC ELECTRIC HOIST LIFTS UP TO 4,000 LBF.



Duty Cycle Line Load Current Draw Amps 12 V Line Speed 24 V Line Speed min/10 min lbf. (kgf) 12 V (24 V) ft./min. (m/min.) ft./min. (m/min.) 12 V (24 V)0 (0) 23 (9) 14.0 (4.3) 14.7 (4.5) Continuous500 (227) 49 (18) 7.1 (2.2) 14.3 (4.4) 6.7 (Cont.)1000 (454) 72 (28) 6.1 (1.9) 13.8 (4.2) 3.7 (9.5)1500 (680) 87 (39) 5.8 (1.8) 13.3 (4.1) 2.9 (5.5)2000 (907) 105 (50) 5.4 (1.6) 12.8 (3.9) 2.3 (3.8)2500 (1134) 137 (61) 4.9 (1.5) 12.5 (3.8) 1.6 (2.9)


12 V No Load 24 V No Load Drum Line Load Line Speed Line Speed Drum Capacity Layer lbf. (kgf) [kN] ft./min. (m/min.) ft./min. (m/min.) ft. (m)1 2500 (1134) [11.1] 14.0 (4.3) 14.7 (4.5) 20 (6.1)2 2250 (1021) [10.0] 15.7 (4.8) 16.4 (5.0) 42 (12.8)3 2045 (928) [9.1] 17.2 (5.2) 18.0 (5.5) 66 (20.1)4 1875 (850) [8.3] 18.8 (5.7) 19.6 (6.0) 92 (28.0)


IND

US

TR

IAL H

OIS

TS

24

WWW.WARN.COM

SPECIFICATIONS:







Gear ratio: 315:1

Motor: Permanent Magnet, DC Electric



Duty Cycle Line Load Current Draw Amps 12 V Line Speed 24 V Line Speed min/10 min lbf. (kgf) 12 V (24 V) ft./min. (m/min.) ft./min. (m/min.) 12 V (24 V)0 (0) 87 (44) 30.4 (9.3) 31.6 (9.6) 5.0 (6.8)600 (272) 116 (63) 23.3 (7.1) 24.1 (7.3) 3.4 (3.9)1200 (544) 143 (78) 19.5 (5.9) 20.3 (6.2) 2.5 (3.0)1800 (816) 172 (92) 16.8 (5.1) 17.9 (5.5) 2.1 (2.4)2400 (1089) 202 (105) 14.8 (4.5) 16.3 (5.0) 1.7 (2.0)3000 (1361) 231 (120) 13.2 (4.0) 14.9 (4.5) 1.5 (1.8)

• Powerful series wound DC motor with robust sealing






PN 85251 (12V) PN 63897 (12V CCW) PN 85252 (24V)

SPECIFICATIONS:







Gear ratio: 199:1

Motor: Series Wound, DC Electric











PN 33503 (12V) PN 85159 (24V)

SPECIFICATIONS:

Rated Capacity: 1,600 lbf. (726 kgf)






Gear ratio: 261:1


Standards compliance: CE Machinery Directive 98/37/EC and 2006/42/EC CE Electromagnetic Compatibility 2004/108/EC ASME B30.5





• Compact midsize frame with integrated tie bars for easy installation


PN 64254 (12V) PN 85250 (24V)

SPECIFICATIONS:







Gear ratio: 261:1


Standards compliance: CE Machinery Directive 98/37/EC and 2006/42/EC CE Electromagnetic Compatibility 2004/108/EC ASME B30.5


DC1200 COMPACT MIDSIZE HOIST LIFTS UP TO 1,200 LBF.


Duty Cycle Line Load Current Draw Amps 12 V Line Speed 24 V Line Speed min/10 min lbf. (kgf) 12 V (24 V) ft./min. (m/min.) ft./min. (m/min.) 12 V (24 V)0 (0) 13 (6) 14.7 (4.5) 14.3 (4.4) Continuous400 (181) 31 (15) 13.8 (4.2) 14.0 (4.3) Continuous800 (363) 53 (23) 13.4 (4.1) 13.8 (4.2) 5.8 (Cont.)1200 (544) 74 (33) 12.9 (3.9) 13.3 (4.1) 3.6 (6.8)1600 (726) 95 (43) 12.5 (3.8) 13.0 (4.0) 2.6 (4.6)


12 V No Load 24 V No Load Drum Line Load Line Speed Line Speed Drum Capacity Layer lbf. (kgf) [kN] ft./min. (m/min.) ft./min. (m/min.) ft. (m)1 1600 (726) [7.1] 14.7 (4.5) 14.3 (4.4) 16 (4.9)2 1440 (653) [6.4] 16.3 (5.0) 15.9 (4.8) 34 (10.4)3 1312 (595) [5.8] 18.0 (5.5) 17.5 (5.3) 53 (16.2)4 1200 (544) [5.3] 19.6 (6.0) 19.1 (5.8) 74 (22.6)5 1104 (501) [4.9] 21.2 (6.5) 20.6 (6.3) 97 (29.6)


Line Load Current Draw Amps 12 V Line Speed 24 V Line Speed Duty Cycle lbf. (kgf) 12 V (24 V) ft./min. (m/min.) ft./min. (m/min.) min/10 min0 (0) 20 (10) 23.5 (7.2) 21.5 (6.6) 2.5300 (136) 39 (18) 21.0 (6.4) 19.2 (5.9) 2.2600 (272) 57 (26) 19.0 (5.8) 17.5 (5.3) 1.9900 (408) 77 (35) 17.0 (5.2) 16.3 (5.0) 1.61200 (544) 100 (45) 15.0 (4.6) 14.6 (4.5) 1.3



IND

US

TR

IAL H

OIS

TS

27


IND

US

TR

IAL H

OIS

TS

26

WWW.WARN.COM







PN 70469 (12V) PN 85160 (24V)

SPECIFICATIONS:







Gear ratio: 261:1







• Compact midsize frame with integrated tie bars for easy installation


PN 63899 (12V) PN 85190 (24V)

SPECIFICATIONS:







Gear ratio: 261:1



DC2000 LFDC ELECTRIC HOIST LIFTS UP TO 2,000 LBF.

DC2000 MFCOMPACT MIDSIZE HOIST LIFTS UP TO 2,000 LBF.


Duty Cycle Line Load Current Draw Amps 12 V Line Speed 24 V Line Speed min/10 min lbf. (kgf) 12 V (24 V) ft./min. (m/min.) ft./min. (m/min.) 12 V (24 V)0 (0) 13 (6) 14.7 (4.5) 14.3 (4.4) Continuous400 (181) 31 (15) 13.8 (4.2) 14.0 (4.3) Continuous800 (363) 53 (23) 13.4 (4.1) 13.8 (4.2) 5.8 (Cont.)1200 (544) 74 (33) 12.9 (3.9) 13.3 (4.1) 3.6 (6.8)1600 (726) 95 (43) 12.5 (3.8) 12.9 (3.9) 2.6 (4.6)2000 (907) 115 (54) 11.9 (3.6) 12.5 (3.8) 2.0 (3.4)


12 V No Load 24 V No Load Drum Line Load Line Speed Line Speed Drum Capacity Layer lbf. (kgf) [kN] ft./min. (m/min.) ft./min. (m/min.) ft. (m)1 2000 (907) [8.9] 14.7 (4.5) 14.3 (4.4) 16 (4.9)2 1800 (816) [8.0] 16.3 (5.0) 15.9 (4.8) 34 (10.4)3 1636 (742) [7.3] 18.0 (5.5) 17.5 (5.3) 53 (16.2)4 1500 (680) [6.7] 19.6 (6.0) 19.1 (5.8) 74 (22.6)5 1385 (628) [6.2] 21.2 (6.5) 20.6 (6.3) 97 (29.6)


Duty Cycle Line Load Current Draw Amps 12 V Line Speed 24 V Line Speed min/10 min lbf. (kgf) 12 V (24 V) ft./min. (m/min.) ft./min. (m/min.) 12 V (24 V)0 (0) 13 (6) 14.7 (4.5) 14.5 (4.4) Continuous400 (181) 30 (15) 14.5 (4.4) 14.4 (4.4) Continuous800 (363) 48 (25) 13.9 (4.2) 14.0 (4.3) 6.7 (Cont.)1200 (544) 67 (34) 13.5 (4.1) 13.6 (4.1) 4.1 (6.8)1600 (726) 87 (44) 13.0 (4.0) 13.2 (4.0) 2.9 (4.6)2000 (907) 107 (54) 12.4 (3.8) 12.8 (3.9) 2.2 (3.4)


12 V No Load 24 V No Load Drum Line Load Line Speed Line Speed Drum Capacity Layer lbf. (kgf) [kN] ft./min. (m/min.) ft./min. (m/min.) ft. (m)1 2000 (907) [8.9] 14.7 (4.5) 14.5 (4.4) 20 (6.1)2 1800 (816) [8.0] 16.3 (5.0) 16.1 (4.9) 43 (13.1)


Line Load Pressure Drop at Pressure Drop at Duty Cycle lbf. (kgf) 5 GPM psi (BAR) 10 GPM psi (BAR) min/10 min0 (0) 95 (6.6) 200 (13.8) 5.0600 (272) 300 (20.7) 500 (34.5) 3.41200 (544) 600 (41.4) 850 (58.6) 2.51800 (816) 900 (62.1) 1200 (82.7) 2.12400 (1089) 1200 (82.7) 1500 (103.4) 1.73000 (1361) 1550 (106.9) 1950 (134.5) 1.5


• Powerful hydraulic motor with robust sealing




PN 36949 PN 36948 (CCW)

SPECIFICATIONS:







Gear ratio: 21:1

Motor: 3.0 ci (50 cc)

Standards compliance: CE Machinery Directive 98/37/EC and 2006/42/EC; ASME B30.5

• Compact midsize frame with integrated tie bars for easy install

• Powerful hydraulic motor with robust sealing




PN 68032

SPECIFICATIONS:







Gear ratio: 26:1

Motor: 2.75 ci (45 cc)

Standards compliance: CE Machinery Directive 98/37/EC and 2006/42/EC; ASME B30.5


Drum Layer Line Load Line Speed Drum Capacity lbf. (kgf) [kN] ft. min. (m/min.) ft. (m)1 3000 (1361) [13.3] 43.0 (13.1) 25 (7.6)2 2700 (1225) [12.0] 47.0 (14.3) 54 (16.5)3 2454 (1113) [10.9] 52.0 (15.8) 85 (25.9)4 2250 (1021) [10.0] 56.0 (17.1) 119 (36.3)

HY3000 HYDRAULIC HOIST LIFTS UP TO 3,000 LBF.

HY2000 COMPACT HYDRAULIC HOIST LIFTS UP TO 2,000 LBF.


Line Load Pressure Drop at Pressure Drop at Duty Cycle lbf. (kgf) 5 GPM psi (BAR) 10 GPM psi (BAR) min/10 min0 (0) 85 (5.9) 400 (27.6) Continuous500 (227) 275 (19.0) 500 (34.5) Continuous1000 (454) 495 (34.1) 691 (47.6) 6.01500 (680) 710 (49.0) 878 (60.5) 3.02000 (907) 900 (62.1) 1065 (73.4) 2.2


Drum Layer Line Load Line Speed Drum Capacity lbf. (kgf) [kN] ft. min. (m/min.) ft. (m)1 2000 (907) [8.9] 46.0 (14.0) 20 (6.1)2 1800 (816) [8.0] 52.0 (15.8) 43 (13.1)3 1636 (742) [7.3] 56.0 (17.1) 67 (20.4)

IND

US

TR

IAL H

OIS

TS

29


IND

US

TR

IAL H

OIS

TS

28

WWW.WARN.COM


Line Load Current Draw Amps 12 V Line Speed 24 V Line Speed Duty Cycle lbf. (kgf) 12 V (24 V) ft./min. (m/min.) ft./min. (m/min.) min/10 min0 (0) 22 (9) 25.0 (7.6) 23.0 (7.0) 2.5500 (227) 55 (21) 22.0 (6.7) 19.0 (5.8) 1.51000 (454) 87 (35) 19.0 (5.8) 16.0 (4.9) 0.8





• Compact frame comes standard with a steel mounting plate and hardware for quick and easy installation


PN 82469 (12V) PN 84350 (12V Short Drum) PN 82470 (24V)

SPECIFICATIONS:







Gear ratio: 136:1


Standards compliance: CE Machinery Directive 98/37/EC and 2006/42/EC CE Electromagnetic Compatibility 2004/108/EC





• Compact frame comes standard with a steel mounting plate and hardware for quick and easy installation


PN 82467 (12V) PN 82468 (24V)

SPECIFICATIONS:

Rated Capacity: 800 lbf. (363 kgf)






Gear ratio: 154:1


Standards compliance: CE Machinery Directive 98/37/EC and 2006/42/EC CE Electromagnetic Compatibility 2004/108/EC


Drum 12 V No Load 24 V No Load Drum Capacity Drum Line Load Line Speed Line Speed Capacity 12 V Short Layer lbf. (kgf) [kN] ft./min. (m/min.) ft./min. (m/min.) ft. (m) ft. (m)1 1000 (454) [4.4] 25.0 (7.6) 23.0 (7.0) 11 (3.4) 7 (2.1)2 835 (379) [3.7] 30.0 (9.1) 27.6 (8.4) 25 (7.6) 15 (4.6)3 717 (325) [3.2] 35.0 (10.7) 32.1 (9.8) 40 (12.2) 25 (7.6)4 628 (285) [2.8] 39.0 (11.9) 36.7 (11.2) 55 (16.8) 36 (11.0)


DC800 COMPACT HOIST LIFTS UP TO 800 LBF.


Line Load Current Draw Amps 12 V Line Speed 24 V Line Speed Duty Cycle lbf. (kgf) 12 V (24 V) ft./min. (m/min.) ft./min. (m/min.) min/10 min0 (0) 14 (6) 18.0 (5.5) 21.0 (6.4) 2.5500 (227) 38 (21) 16.2 (4.9) 18.0 (5.5) 1.5800 (363) 53 (30) 13.0 (4.0) 14.0 (4.3) 1.0



DC3000

DC2500

DC2000

DC1600

DC1200

DC1000

DC800

3,000 lbf. (1361 kgf)

2,500 lbf. (1134 kgf)

2,000 lbf. (907 kgf)

1,600 lbf. (726 kgf)

1,200 lbf. (544 kgf)

1,000 lbf. (454 kgf)

800 lbf. (363 kgf)

PN 85251 (12V) PN 63897 (12V CCW) PN 85252 (24V)

PN 74396 (12V) PN 78355 (12V CCW) PN 85161 (24V)

PN 63899 (12V) PN 85190 (24V)

PN 70469 (12V) PN 85160 (24V)

PN 33503 (12V) PN 85159 (24V)

PN 64254 (12V) PN 85250 (24V)

PN 82469 (12V) PN 84350 (12V Short Drum) PN 82470 (24V)

PN 82467 (12V) PN 82468 (24V)

DC4000 4,000 lbf. (1814 kgf) PN 89833 (12V) PN 90124 (24V)

HY3000

HY2000

3,000 lbf. (1361 kgf)

2,000 lbf. (907 kgf)

PN 36949 PN 36948 (CCW)

PN 68032

INDUSTRIAL WINCH ACCESSORY KIT• Snatch block, choker chain and shackle

• Winching gloves

• Tree trunk protector and recovery strap

• Nylon camouflaged soft case

• Rated for winches up to 12,000 lbf.

PN 29460

WINCH REMOTE CONTROLS• Weatherproof industrial-quality corded remote controls

• Designed to meet stringent performance standards

PN 88528 For DC Electric Industrial Winches, with 12’(3.65 m) lead

PN 88527 For DC Electric Industrial Winches, with 33’(10.05 m) lead

PN 65014 For DC Electric Industrial Winches, with 27’(8.22 m) lead, CE, with E-stop (not EN60204 compliant)

PN 63680 For DC Electric Industrial Winches, with 12’(3.65 m) lead, CE, with E-stop (not EN60204 compliant)

PN 77671 For DC Electric Severe Duty Winches, with 12’(3.65 m lead

PN 85394 For DC Electric Severe Duty Winches, with 33’(10.05 m) lead

REMOTE AIR CLUTCH• Operating range of

50-250 psi (3.50-17.25)

• Single acting air clutch with positive spring engagement

• Easily installed, compact size

• For all Series winches

PN 71370

OVERLOAD INTERRUPT (OLI) • Digital technology designed to limit

a winch’s maximum pulling power in the case of overload or low-voltage situations

• LED display provides motor current feedback

• Sealed against damage caused by moisture and chemicals

• For use with all WARN Industrial electric winches, 12- and 24-volt compatible

• Factory programmed to customer specifications. Can be reprogrammed to a new set point in the field by trained factory representatives

Part numbers: Contact Warn Industries Customer Service for application assistance

REMOTE CLUTCH KIT, MECHANICAL• Allows for easy engagement and disengagement of the clutch for winches mounted in

hard-to-reach areas

• Threaded rod shown in photo is not included in kit 38316

PN 38316 for Series winches

INDUSTRIAL WINCH ACCESSORIES

IND

US

TR

IAL A

CC

ES

SO

RIE

S

31


IND

US

TR

IAL H

OIS

TS

30

WWW.WARN.COM

REMOTE CONTROLS (All Hoist Models):

Industrial Remote, Heavy Duty, 12 foot 88528

Industrial Remote, Heavy Duty, 10 meter 88527

Industrial Remote, Heavy Duty w/ E-stop, 12 foot 63680

DC800-12V Permanent Magnet 63926 83321 N/A 36648 35169




DC1200-CF-12V Permanent Magnet 63926 83321 N/A 36648 35169

DC1200-CF-24V Permanent Magnet 84710 83322 N/A 36648 35169

DC1600-LF-12V Permanent Magnet 40709 34440 34973 36648 35169


DC2000-MF-12V Permanent Magnet 40709 34440 34973 36648 35169

DC2000-MF-24V Permanent Magnet 63752 34968 34974 36648 35169

DC2000-MF-12V Series Wound 39602 34969 34975 36648 35169

DC2000-MF-24V Series Wound 39603 34970 34976 36648 35169





DC3000-LF-12V Series Wound 39602 34969 34975 36648 35169




CONTROL PACKS:

Hoist Model Motor Type Control Pack

Contactor Only (with universal bracket)

Contactor Only (with bracket for WARN cover)

Contactor Cover Only (with remote plug)

Contactor Cover Only (w/o remote plug)

CONTROL PACK AND REMOTE CONTROL FOR THE DC POWERED HOIST

Industrial control packs and remote controls are sold separately from WARN hoist units.Here’s how to order the correct control pack and remote control that fits your DC-powered hoist:1. Locate your hoist model in the chart below.2. Order the control pack and remote control to work with your hoist. Control pack and remote are each sold separately.

Hydraulic Model Rated Capacity Small Frame Mid Frame Large Frame

LOAD

RAT

ING

DRUM CAPACITY

DRUM CAPACITY

HOIST SELECTION CHART

LOAD

RAT

ING

Electric Model Rated Capacity Small Frame Mid Frame Large Frame

IND

US

TR

IAL A

CC

ES

SO

RIE

S

32

WWW.WARN.COM

IND

US

TR

IAL A

CC

ES

SO

RIE

S

33


INDUSTRIAL SNATCH BLOCK• Doubles the pulling power of your winch

• Aids in sharp angle and three-point rigging

PN 15640 24,000 lbs. (10,886 kg)PN 63490 33,000 lbs. (14,968 kg)PN 78387 36,000 lbs. (16,329 kg)PN 80858 60,000 lbs. (27,215 kg)

RECOVERY STRAP• Absorbs the shock of heavy pulls, while the elastic rebound

energy aids in quick recovery

PN 11392 3” x 30’ (8 cm x 9 m)

WIRE ROPE TENSION KIT• Prevents wire rope tangling when freespooling

• Assists in uniform wire rope spooling

• Available in two models: Heavy Duty and Standard

PN 31282 12.5” wide drumPN 31149 10” wide drumPN 31150 8” wide drumPN 34373 Series 6

WIRE ROPE AND HOOK ASSEMBLIES• EIPS industrial-grade wire rope assemblies allow

for maximum versatility

• Forged steel hook, hook latch, and metal protection thimble included in most assemblies

INDUSTRIAL ROLLER FAIRLEADS• High-strength steel rollers

• Permanently lubed bronze bushings provide long roller life and smooth cable retrieval

• Heavy-duty welded frame

• Available in chrome, painted or CARC coated

• Available for all industrial winches

PN 29844 Black, Series Winch, 6.5” drumPN 24335 Black, Series Winch, 8” drumPN 24336 Black, Series Winch, 10” drumPN 30860 Chrome, Series Winch, 8” drumPN 30859 Chrome, Series Winch, 10” drumPN 77532 Black, Series XL Winch, 8” drumPN 77869 Black, Series XL Winch, 14” drum

PN 60076 3/16 X 50’ Galvanized PN 68851 7/32 X 55’ Galvanized PN 24889 1/4 X 25’ EIPS PN 24890 1/4 X 40’ EIPS PN 24891 1/4 X 50’ EIPS PN 71297 1/4 X 60’ Galvanized PN 24893 1/4 X 100’ Galvanized PN 24896 5/16 X 25’ EIPS PN 38309 5/16 X 50’ Galvanized PN 24899 5/16 X 75’ EIPS PN 15276 5/16 X 80’ Galvanized PN 24900 5/16 X 100’ EIPS PN 25987 5/16 X 125’ Galvanized PN 26749 5/16 X 150’ Galvanized PN 23671 3/8 X 50’ EIPS PN 27567 3/8 X 20M EIPS PN 23672 3/8 X 75’ EIPS PN 32403 3/8 X 80’ Galvanized PN 27569 3/8 X 30M EIPS PN 18603 3/8 X 100’ Galvanized PN 23674 3/8 X 125’ EIPS PN 23675 3/8 X 150’ EIPS PN 23677 7/16 X 75’ EIPS PN 23678 7/16 X 100’ EIPS PN 31297 7/16 X 150’ EIPS PN 79294 1/2 X 60’ EIPS (hook not included) PN 80352 1/2 X 60’ EIPS (hook not included) PN 77534 1/2 X 75’ EIPS PN 77451 9/16 X 140’ EIPS (hook not included) PN 77452 9/16 X 245’ EIPS (hook not included) PN 77453 5/8 X 140’ EIPS (hook not included) PN 77454 5/8 X 245’ EIPS (hook not included)

WARN SPYDURA® PROMAX SYNTHETIC ROPEFully armored for abrasion resistance and durability

• Exclusively developed for Military/Severe Duty winching applications

• Unique 6-strand construction of Dyneema® SK-75 fiber for superior rope durability

• Full length woven cover provides the ultimate in resistance to abrasion, dirt, and ultra-violet damage

• High temperature resistant material is woven directly into the cover to protect the rope from heat damage

• Reinforced welded steel tube thimble and braided eyelets for maximum capacity

• Available for Industrial Series and Olympus 25 winches

WARN SPYDURA® PRO SYNTHETIC ROPE

Heat treated for improved strength and rope length

• Heat treated construction of Spectra® 1000 fiber for maximum tensile strength and greater load bearing capacity

• Compacted diameter for higher density and more rope length on the winch drum

• The compacted diameter prevents sand and dirt from penetrating the fibers and extends the life of the rope

• Coated for increased UV and chemical resistance

• High temperature resistant sleeve on the first layer

• Ballistic nylon sliding sleeve provides extra protection against abrasion and wear

• Available for Industrial Series winches

PN 93120 80’ x 3/8” (replacement for Series 9-S Pro and 12-S Pro winches)

PN 91820 100’ x 7/16” (replacement for Series 15-S Pro winch)

PN 91840 70’ x 1/2” (replacement for Series 15-S ProMax)PN 86962 100’ x 3/8” (replacement for Series 9-S ProMax, 12-S ProMax)

Warn Industries, Inc. 12900 S.E. Capps Road

Clackamas, OR USA 97015-8903

1-503-722-1200 FAX: 1-503-722-3000

Customer Service: 1-800-543-9276Dealer Locator Service: 1-800-910-1122

International Sales Support: 1-503-722-1200International FAX: 1-503-722-3005

The dealer locator service is available 7 days per week and 24 hours a day.Customer service is available between 7:00 am and 4:00 pm Pacific Time, Monday through Friday.

warn.com

© 2015 Warn Industries, Inc. WARN®, the WARN logo, and Sypydura® are registered trademarks of Warn Industries. Printed in USA. Specifications subject to change at any time.

PN 910046

INDUSTRIAL, MILITARY, AND SEVERE DUTY … MILITARY, AND SEVERE DUTY WINCHES AND HOISTS. WARN: ......

Documents

Transcript of INDUSTRIAL, MILITARY, AND SEVERE DUTY … MILITARY, AND SEVERE DUTY WINCHES AND HOISTS. WARN: ......