Industrial Glue Guns, Hot Melt Adhesives and Speciality Adhesives
description
Transcript of Industrial Glue Guns, Hot Melt Adhesives and Speciality Adhesives
• Hot Melt Adhesives
• Industrial Glue Guns
• Specialty Adhesives
®
Industrial
www.surebonder.com
Pro600 Adjustable Temperature Pneumatic Glue Gun • Pneumatically controlled pistons feed the glue stick • Temperature adjustment from 284º F to 400º F • Stroke adjustment screw for equal amounts of glue per squeeze • The 450 watt heater gives you greater glue output • Integrated gun balancer mount hole • Lighted On/Off switch
Includes: extra nozzle, temperature control screwdriver, air regulator, 8 ft. air
hose with quick connector, and storage case. Uses 5/8" (.625) glue sticks.
Recommended air pressure: 30 - 80 psi. Weight 3 lbs. Interchangeable
accessory nozzles available.
Pro 9700A Adjustable Temperature Glue Gun
• Ergonomic finger trigger design for less effort • Temperature adjustment from 220º F to 400º F
• Stroke adjustment screw for equal amounts of glue per squeeze • The 300 watt heater gives you greater glue output • Integrated gun balancer mount hole • Lighted On/Off switch
Includes: stroke adjustment screw, extra nozzle, wire stand & storage case.
Uses standard 7/16” (.43”) diameter glue sticks. Weight: 1.6 lbs.
Interchangeable accessory nozzles available.
Pro450 Adjustable Temperature Glue Gun
• Ergonomic finger trigger design for less effort • Temperature adjustment from 220º F to 400º F
• Stroke adjustment screw for equal amounts of glue per squeeze • The 400 watt heater gives you greater glue output • Integrated gun balancer mount hole • Lighted On/Off switch
Includes: extra nozzle, wire stand, stroke adjustment screw and storage
case. Uses 5/8" (.625) glue sticks. Weight: 1.75 lbs. Interchangeable
accessory nozzles available.
Pro2-220 Adjustable Temperature Glue Gun
• Ergonomic finger trigger design for less effort • Temperature adjustment from 220º F to 400º F
• Stroke adjustment screw for equal amounts of glue per squeeze • Integrated gun balancer mount hole • Lighted On/Off switch
Includes: extra nozzle, wire stand, stroke adjustment screw and storage case. Uses standard 7/16” (.43”) diameter glue sticks. Weight 1.3 lbs. Interchangeable accessory nozzles available.
Industrial Glue Guns
uses
5/8"glue sticks
450 watts
uses
5/8"glue sticks
400 watts
uses
Standard*glue sticks
watts300
PneumaticPneumatic
uses
Standard*glue sticks
watts220
* Standard glue sticks are 7/16" (.43") diameter but can vary slightly in thickness up to 1/2" (.50").
H-350
uses
Standard*glue sticks
watts180
uses
Standard*glue sticks
watts80
A
B
C D E F
G H I
uses
Standard*glue sticks
watts80
uses
Standard*glue sticks
watts200
uses
Standard*glue sticks
watts100
Pro9000A High Temperature Glue Gun • Ergonomic long trigger design for less effort • Magnetic base with mounting plate & detachable wire stand • Integrated gun balancer mount hole• Lighted On/Off switch• Interchangeable nozzle
Operating temperature: 380° F
Pro9000LT Low Temperature Glue Gun Same features as Pro9000A - for lower heat applications. Operating temperature : 250° F
Pro2-100 High Temperature Glue Gun
• Ergonomic comfort grip and long trigger • Protective heat resistant nozzle cover• Detachable wire stand • Interchangeable nozzle• On/Off switchOperating temperature: 380° F
Pro2-100L Low Temperature Glue Gun Same features as the Pro2-100 - for lower heat applications. Operating temperature: 250° F
HE-750 Professional Glue Gun
• Ergonomic comfort grip and long trigger • Detachable wire stand• Interchangeable nozzle Operating temperature: 380° F
Pro8000A Quick Heating Professional Glue Gun
• Ergonomic finger trigger design for less effort• Dual heaters• Stroke adjustment screw dispenses equal amounts of glue • Protective heat resistant nozzle cover • Integrated gun balancer mount hole• Lighted On/Off switch• Extended metal stand for added stability• Interchangeable nozzleOperating temperature: 380° F
Pro2-80 High Temperature Glue Gun• Ergonomic comfort grip and long trigger • Protective heat resistant nozzle cover• Detachable wire standOperating temperature: 380° F
Specialty Nozzles for Pro Series Glue Guns
A) "T" Carpet nozzle #6032 F) .160" Check valve #101 B) Block (Ribbon) nozzle #102 G) .125" Cap #103CS-125 C) .053 Flat extension #103F H) .090" Cap #103CS-90 D) .125 Round extension #103R I) .076" Cap #103C-076 E) .080 Needle extension #103N
Note: All cap nozzles must use check valve #101.
uses
Standard*glue sticks
watts120
753 - Stationary Pneumatic Hot Melt Applicator Designed for hands-free assembly line applications• 2 pound melt tank capacity• Shot timer (dispenses exactly same
amount of glue each time foot treadle is depressed)• Adjustable Temperature (200° F - 500° F)• Adjustable air pressure regulator • Foot switch for on-demand gluing, or for activating shot timer• No complicated gear pump
Includes 3 interchangeable nozzles: .040”, .080”, .125”Operating air pressure: 40 - 70 psi.Dimensions: 8 3/8” x 10 1/4” x 18 1/4”; Weight: approx. 33 lbs.Air compressor not included.
®
Works with RYOBI 18V Lithium ONE + Battery
Lasts up to
1houron a single charge!
18V Battery
ON
OFF
.
18V Lithium Cordless & AC Cord
Applications / Properties All are in compositional compliance with FDA regulation #21CFR175.105 for food packaging.
Low Melt adhesive for sealing corrugated cartons. Will bond to most porous materials. 5 second open time. Tan.
Fast-Set adhesive for sealing corrugated cartons. Will bond to most porous materials such as wood, paper, cloth.
15 second open time. Tan.
Very Fast Set adhesive for sealing corrugated cartons. Ideal for small to medium size boxes. Will bond to most porous
materials such as wood, paper, cloth. 5-10 second open time. Cream.
High Performance adhesive for difficult-to-bond substrates. Will adhere to most substrates, porous or non-porous
materials. Bonds to glass, leather, metal, plastics, magnets, ceramic, wood, ABS, PVC, and some vinyls. 30 second
open time. Clear.
High Performance adhesive for difficult-to-bond substrates. Will adhere to most substrates, porous or non-porous
materials. Bonds to glass, leather, metal, plastics, magnets, ceramic, wood, ABS, PVC, and some vinyls. 45 second
open time. Clear.
Excellent Carpet Back Seaming adhesive. Resists cracking at low temperatures and rigid enough to prevent “smiling”.
15 second open time. Tan.
Fast Set Packaging adhesive with excellent hot tack, short open time and good delivery rate. Good adhesion to plain
and some coated corrugated packaging and paper products. 10 second open time. Tan.
.
General Purpose All-Temperature adhesive. Works at either low temperature (250°F) or high temperature (380°F).
Bonds to porous and non-porous substrates. 60 second open time. Clear.
High Strength adhesive. Good adhesive for metals, plastics, wood, ceramics, coated papers and non porous materials.
Exhibits good resistance to shock in low and ambient temperatures. 25 second open time. Amber.
General Purpose adhesive for woodworking and carpets. Low viscosity, very good hot tack, 15 second open time Light brown.
open removal. 25 secondHigh Strength Wood Adhesive - For strongest bond to wood. Also used for auto body dent time. Amber.
Acrylic Hot Melt Unique high performance adhesive developed for superior bonding to hard to bond surfaces. This
adhesive is strong, remains flexible and has a medium open and set time. Bonds to: concrete, vinyl, metal, rubber, tile,
stone, ceramic, leather, melamine, coated papers, foil, wood, nylon, fabric, glass, plastics. Clear.
Polyamide Tough elastomeric high performance general purpose hot melt adhesive. Excellent impact resistance at low
temperatures. Excellent high temperature resistance. Bonds to many substrates: metals, plastics, wood, leather, fabric,
non-woven fabric, film and foils. 75 second open time. Amber .
General Purpose "Low stringing" adhesive adheres to non-porous material such as metal, plastic, glass and ceramic. Ideal for use in electric skillets for the floral industry. 35 second open time. Cream.
Fugitive Pressure-Sensitive hot melt gives peelable bond between many substrates including: polyethylene,
polypropylene, paper, etc. Great for affixing credit cards to brochures; sprayable. Long open time.
Aggressive Tack general purpose pressure-sensitive hot melt. Bonds to metal, wood, plastic, foam and paper. Long open time.
Formula
601
701
702
707
3190
708
711
725
735
738
739
925
S-12478-12
B-2000
B-10154
B-4930
7/16" glue sticks will fit in both 7/16" and 1/2" glue guns.
Additional formulas available; call for more information. MSDS and specification sheets available at www.surebonder.com
Hot Melt AdhesivesMade in our facility in the USA
Industrial Applicator
• Up to 60 minute continual working time Lithium-ion 18V technology battery•
Ergonomic finger trigger design for less effort Protective heat resistant nozzle cover • Battery On/Off switch• Use indicator light
Battery and charger purchased separately.
RYOBI® is a registered trademark of Ryobi limited.
Hybrid-120
Plugs into AC Outlet
DUAL POWERDUAL POWER
18V Lithium Battery Powered
TM.NEW
Sizes Available
Diameter Length(s)
7/16" 10",15" 5/8" 2",10"3/4" 2-1/2"Pellets7/16" 10",15"5/8" 2",10"3/4" 2-1/2"1" 3”1-3/4" 1-3/4"Pellets7/16" 10"5/8" 10"Pellets5/16" 4"7/16" 10",15"5/8" 2", 10"Pellets
7/16" 10"
7/16" 10"5/8" 10"1-3/4" 1-3/4"7/16" 10",15"5/8" 2", 10"3/4" 2-1/2"1" 3”Pellets5/16" 4", 10"7/16" 10", 15"5/8" 2", 10"3/4" 2-1/2"1" 3”Pellets
7/16" 10" 5/8" 2",10" 3/4" 2-1/2" 1" 3” Pellets
7/16" 4",10"5/8" 10"3/4" 2-1/2"7/16" 10"1-3/4" 1-3/4"
7/16" 10"
7/16" 10"
Pellets
.8 lb Brick
.8 lb Brick
FPC Corporation 355 Hollow Hill Drive Wauconda, IL 60084 Phone: .847.487.4583 Fax: .847.487.0174 email: [email protected]
0314
Glue Dabs
Pre-made pressure sensitive dots of adhesive - no need to heat up a
glue gun. For temporary or permanent assembly applications. 6,000
dabs per box. Each dab is approximately 3/8” diameter. Available in 4
formulas.
Low Tack DOT-L - For temporary bonding; easily removes from surface.
Medium Tack DOT-M - Temporary bonding: removable.
High Tack DOT-H - High strength; still removable from most surfaces.
Super High Tack DOT-S - Permanent bonding to most surfaces.
FPC-9001
Extra thick glue for superior bonding
and flexibility. Bonds to metal, plastic,
wood, glass, ceramics, fabric, vinyl.
2.0 fl. oz. tube
Pro100 Adhesive System
Dispenses special hot melt adhesives such as pressure sensitive
fugitive (removable) and PUR adhesives in any shape or size
needed without bulky applicators. The heater has high and low
temperature settings. Adhesives available in removable or
permanent bonding formulations, as well as PUR adhesive.
Adhesive cartridges sold separately.
Operating temperature: Low Temp - 250° F / High Temp - 325° F
Adhesive Cartridges for the Pro100
AT-10154 Fugitive pressure-sensitive; peelable bond; works with polyethylene, polypropylene, paper and more.
AT-4930 General purpose pressure sensitive; aggressive tack; works on foam, plastics, paper and more.
Specialty Adhesives