Industrial communication networks — Profiles
Transcript of Industrial communication networks — Profiles
![Page 1: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/1.jpg)
raising standards worldwide™
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
BSI Standards Publication
BS EN 61784-3-1:2010
Industrial communicationnetworks — Profiles -Part 3-1: Functional safety fieldbuses —Additional specifications for CPF 1
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 2: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/2.jpg)
BS EN 61784-3-1:2010 BRITISH STANDARD
National foreword
This British Standard is the UK implementation of EN 61784-3-1:2010. It is identical to IEC 61784-3-1:2010. It supersedes BS EN 61784-3-1:2008 which is withdrawn.
The UK participation in its preparation was entrusted to TechnicalCommittee AMT/7, Industrial communications: process measurementand control, including fieldbus.
A list of organizations represented on this committee can beobtained on request to its secretary.
This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication.
© BSI 2010
ISBN 978 0 580 72027 7
ICS 25.040.40; 35.100.05
Compliance with a British Standard cannot confer immunity fromlegal obligations.
This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2010.
Amendments issued since publication
Date Text affected
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 3: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/3.jpg)
EUROPEAN STANDARD EN 61784-3-1 NORME EUROPÉENNE
EUROPÄISCHE NORM August 2010
CENELEC European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-3-1:2010 E
ICS 25.040.40;35.100.05 Supersedes EN 61784-3-1:2008
English version
Industrial communication networks - Profiles -
Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1
(IEC 61784-3-1:2010) Réseaux de communication industriels - Partie 3-1: Bus de terrain à sécurité fonctionnelle - Spécifications complémentaires pour le CPF 1 (CEI 61784-3-1:2010)
Industrielle Kommunikationsnetze - Profile - Teil 3-1: Funktional sichere Übertragung bei Feldbussen - Zusätzliche Festlegungen für die Kommunikationsprofilfamilie 1 (IEC 61784-3-1:2010)
This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 4: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/4.jpg)
BS EN 61784-3-1:2010EN 61784-3-1:2010 - 2 -
Foreword
The text of document 65C/591A/FDIS, future edition 2 of IEC 61784-3-1, prepared by SC 65C, Industrial networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61784-3-1 on 2010-07-01.
This European Standard supersedes EN 61784-3-1:2008.
The main technical changes with respect to EN 61784-3-1:2008 are listed below:
− updates in relation with changes in EN 61784-3;
− adjustment of Figure 5;
− change of sequence number from two octets to four octets in 7.2.2 to match the final protocol from the consortium.
− addition of details for time synchronization in 7.2.4;
− addition of information for safety response time in 9.3;
− addition of information in constraints for calculation of system characteristics in 9.5.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.
The following dates were fixed:
– latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2011-04-01
– latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2013-07-01
Annex ZA has been added by CENELEC.
__________
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 5: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/5.jpg)
BS EN 61784-3-1:2010 - 3 - EN 61784-3-1:2010
Endorsement notice
The text of the International Standard IEC 61784-3-1:2010 was approved by CENELEC as a European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60204-1 NOTE Harmonized as EN 60204-1.
IEC 61158 series NOTE Harmonized in EN 61158 series (not modified).
IEC 61326-3-1 NOTE Harmonized as EN 61326-3-1
IEC 61326-3-2 NOTE Harmonized as EN 61326-3-2.
IEC 61496 series NOTE Harmonized in EN 61496 series (partially modified).
IEC 61508-5:2010 NOTE Harmonized as EN 61508-5:2010 (not modified).
IEC 61508-6:2010 NOTE Harmonized as EN 61508-6:2010 (not modified).
IEC 61784-2 NOTE Harmonized as EN 61784-2.
IEC 61784-5 series NOTE Harmonized in EN 61784-5 series (not modified).
IEC 61800-5-2 NOTE Harmonized as EN 61800-5-2.
IEC 62061 NOTE Harmonized as EN 62061.
ISO 10218-1 NOTE Harmonized as EN ISO 10218-1.
ISO 12100-1 NOTE Harmonized as EN ISO 12100-1.
ISO 13849-1 NOTE Harmonized as EN ISO 13849-1.
ISO 13849-2 NOTE Harmonized as EN ISO 13849-2.
ISO 14121 NOTE Harmonized as EN ISO 14121.
__________
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 6: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/6.jpg)
BS EN 61784-3-1:2010EN 61784-3-1:2010 - 4 -
Annex ZA (normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year
IEC 61131-2 - Programmable controllers - Part 2: Equipment requirements and tests
EN 61131-2 -
IEC 61158-2 - Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
EN 61158-2 -
IEC 61158-3-1 - Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements
EN 61158-3-1 -
IEC 61158-4-1 - Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements
EN 61158-4-1 -
IEC 61158-5-5 - Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 elements
EN 61158-5-5 -
IEC 61158-5-9 - Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 elements
EN 61158-5-9 -
IEC 61158-6-5 - Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 elements
EN 61158-6-5 -
IEC 61158-6-9 - Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements
EN 61158-6-9 -
IEC 61508 Series Functional safety of electrical/electronic/programmable electronic safety-related systems
EN 61508 Series
IEC 61508-1 2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
EN 61508-1 2010
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 7: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/7.jpg)
BS EN 61784-3-1:2010 - 5 - EN 61784-3-1:2010
Publication Year Title EN/HD Year
IEC 61508-2 2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
EN 61508-2 2010
IEC 61508-3 2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
EN 61508-3 2010
IEC 61508-4 2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
EN 61508-4 2010
IEC 61511 Series Functional safety - Safety instrumented systems for the process industry sector
EN 61511 Series
IEC 61784-1 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles
EN 61784-1 -
IEC 61784-3 2010 Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
EN 61784-3 2010
IEC 61918 - Industrial communication networks - Installation of communication networks in industrial premises
EN 61918 -
IEC 62280-1 - Railway applications - Communication, signalling and processing systems - Part 1: Safety-related communication in closed transmission systems
- -
ISO/IEC 8802-3 - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
- -
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 8: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/8.jpg)
This page deliberately left blank
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 9: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/9.jpg)
– – 61784-3-1 © IEC:2010(E)
CONTENTS
0 Introduction ......................................................................................................................9 0.1 General ...................................................................................................................9 0.2 Patent declaration .................................................................................................11
1 Scope............................................................................................................................. 12 2 Normative references .....................................................................................................12 3 Terms, definitions, symbols, abbreviated terms and conventions .................................... 13
3.1 Terms and definitions ............................................................................................13 3.1.1 Common terms and definitions .................................................................. 14 3.1.2 CPF 1: Additional terms and definitions .....................................................18
3.2 Symbols and abbreviated terms............................................................................. 19 3.2.1 Common symbols and abbreviated terms .................................................. 19 3.2.2 CPF 1: Additional symbols and abbreviated terms ..................................... 19
3.3 Conventions ..........................................................................................................20 3.3.1 State diagrams ..........................................................................................20 3.3.2 Use of colors in figures ..............................................................................21
4 Overview of FSCP 1/1 (FOUNDATION Fieldbus™ SIS) ...................................................... 21 4.1 General .................................................................................................................21 4.2 Key concepts of FSCP 1/1.....................................................................................22
4.2.1 Black channel ............................................................................................22 4.2.2 Connection key..........................................................................................22 4.2.3 Cross-check ..............................................................................................23 4.2.4 FSCP 1/1...................................................................................................23 4.2.5 Programmable electronic system ............................................................... 23 4.2.6 Queuing delays .........................................................................................23 4.2.7 Redundancy ..............................................................................................23 4.2.8 SIL environment ........................................................................................ 23
4.3 Key components of FSCP 1/1 ................................................................................23 4.3.1 Overview ...................................................................................................23 4.3.2 Black channel ............................................................................................24
4.4 Relationship to the ISO OSI basic reference model ............................................... 25 5 General .......................................................................................................................... 25
5.1 External documents providing specifications for the profile .................................... 25 5.2 Safety functional requirements .............................................................................. 25
5.2.1 Requirements for functional safety............................................................. 25 5.2.2 Functional constraints................................................................................26 5.2.3 Device manufacturer requirements ............................................................26
5.3 Safety measures ...................................................................................................26 5.3.1 Sequence number .....................................................................................26 5.3.2 Time stamp ...............................................................................................26 5.3.3 Time expectation .......................................................................................26 5.3.4 Connection authentication ......................................................................... 26 5.3.5 Data integrity assurance ............................................................................ 26 5.3.6 Redundancy with cross checking ............................................................... 27 5.3.7 Different data integrity assurance systems ................................................ 27 5.3.8 Relationships between errors and safety measures ................................... 27
4BS EN 61784-3-1:2010
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 10: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/10.jpg)
61784-3-1 © IEC:2010(E) – 5 –
5.4 Safety communication layer structure ....................................................................27 5.4.1 Network topology and device connectivity.................................................. 27 5.4.2 Device architecture....................................................................................28
5.5 Relationships with FAL (and DLL, PhL) ................................................................. 29 5.5.1 General .....................................................................................................29 5.5.2 Data types .................................................................................................29
6 Safety communication layer services .............................................................................. 30 6.1 Application Process (AP) .......................................................................................30
6.1.1 Overview ...................................................................................................30 6.1.2 Network visible objects .............................................................................. 30 6.1.3 Application layer interface .........................................................................30 6.1.4 Object dictionary .......................................................................................30 6.1.5 Application program directory .................................................................... 30
6.2 Function block application processes .................................................................... 31 6.2.1 General .....................................................................................................31 6.2.2 Function block model.................................................................................31 6.2.3 Application process ................................................................................... 33
6.3 Device to device communications ..........................................................................36 6.3.1 General .....................................................................................................36 6.3.2 Client/server ..............................................................................................36 6.3.3 Publisher/subscriber .................................................................................. 37 6.3.4 Report distribution .....................................................................................37 6.3.5 FBAP operation in a linking device ............................................................ 37 6.3.6 System management kernel protocol (SMKP) communications .................. 37
6.4 Profiles..................................................................................................................37 6.4.1 General .....................................................................................................37 6.4.2 FSCP 1/1 profile ........................................................................................37
6.5 Device descriptions ............................................................................................... 38 6.6 Common file formats .............................................................................................38 6.7 Configuration information ......................................................................................39
6.7.1 Overview ...................................................................................................39 6.7.2 Level 1 configuration: manufacturer device definition................................. 39 6.7.3 Level 2 configuration: network definition .................................................... 39 6.7.4 Level 3 configuration: distributed application definition .............................. 39 6.7.5 Level 4 configuration: device configuration ................................................ 39
7 Safety communication layer protocol .............................................................................. 39 7.1 Safety PDU format ................................................................................................39
7.1.1 General .....................................................................................................39 7.1.2 Safety communication layer CRC ..............................................................39 7.1.3 Black channel time synchronization monitoring .......................................... 40 7.1.4 Sequence number .....................................................................................40 7.1.5 Virtual header ............................................................................................41 7.1.6 Connection key..........................................................................................41 7.1.7 Redundancy and cross-check ....................................................................41
7.2 Protocol extensions for use in safety-related systems............................................ 42 7.2.1 Overview ...................................................................................................42 7.2.2 Publisher-subscriber interactions ............................................................... 42 7.2.3 Client-server interactions ...........................................................................47 7.2.4 Time synchronization.................................................................................53
BS EN 61784-3-1:2010
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 11: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/11.jpg)
– 6 – 61784-3-1 © IEC:2010(E)
7.2.5 Device start-up ..........................................................................................54 7.3 Communications entity .......................................................................................... 54
7.3.1 General .....................................................................................................54 7.3.2 Network management ................................................................................54 7.3.3 FMS ..........................................................................................................54 7.3.4 H1 stack ....................................................................................................54
8 Safety communication layer management .......................................................................55 8.1 Overview ...............................................................................................................55 8.2 SMK communications ............................................................................................55 8.3 FMS services ........................................................................................................55 8.4 SMK services ........................................................................................................55
8.4.1 General .....................................................................................................55 8.4.2 Address assignment ..................................................................................55 8.4.3 Time synchronization.................................................................................55
8.5 Safety communication layer configuration and start-up .......................................... 55 8.5.1 H1 configuration and start-up .................................................................... 55 8.5.2 FSCP 1/1 FBAP.........................................................................................56 8.5.3 Testing ......................................................................................................56
9 System requirements ......................................................................................................56 9.1 Indicators and switches .........................................................................................56 9.2 Installation guidelines............................................................................................56 9.3 Safety function response time ............................................................................... 56
9.3.1 Overview ...................................................................................................56 9.3.2 Safety Sensor ............................................................................................56 9.3.3 Input Function Block ..................................................................................57 9.3.4 Safe Transmission .....................................................................................57 9.3.5 Logic Solver ..............................................................................................57 9.3.6 Discrete Output Function Block .................................................................57 9.3.7 Safety Actuator..........................................................................................57
9.4 Duration of demands .............................................................................................57 9.5 Constraints for calculation of system characteristics.............................................. 57
9.5.1 System characteristics............................................................................... 57 9.5.2 Message rate.............................................................................................57 9.5.3 SIL level ....................................................................................................58 9.5.4 Mixing FSCP 1/1 devices and CP 1/1 devices............................................ 58 9.5.5 Devices on a segment ............................................................................... 58 9.5.6 Residual error rate calculations ................................................................. 58
9.6 Maintenance..........................................................................................................59 9.7 Safety manual .......................................................................................................59
10 Assessment ....................................................................................................................59 Annex A (informative) Additional information for functional safety communication
profiles of CPF 1 ............................................................................................................60 A.1 Hash function calculation................................................................................................ 60 A.2 Fault conditions arising from locations beyond the output function block......................... 62 Annex B (informative) Information for assessment of the functional safety communication profiles of CPF 1 ..........................................................................................64 Bibliography.......................................................................................................................... 65
BS EN 61784-3-1:2010
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 12: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/12.jpg)
61784-3-1 © IEC:2010(E) – 7 –
Table 1 – Example state transition table ............................................................................... 21 Table 2 – Safety measures and possible communication errors ............................................ 27 Table 3 – Data types used within FSCP 1/1 ..........................................................................30 Table 4 – Fault state behaviour............................................................................................. 33 Table 5 – Publisher states .................................................................................................... 43 Table 6 – Publisher state table - Received transitions ........................................................... 44 Table 7 – Publisher state table - Internal transitions.............................................................. 44 Table 8 – Subscriber states ..................................................................................................45 Table 9 – Subscriber state table - Received transitions ......................................................... 46 Table 10 – Subscriber state table - Internal transitions..........................................................47 Table 11 – Server states during read operations ................................................................... 48 Table 12 – Received transitions for a FSCP 1/1 Server during read operations ..................... 49 Table 13 – States of a FSCP 1/1 server during write operations............................................ 51 Table 14 – Received transitions for a FSCP 1/1 Server during write operations .................... 51 Table 15 – Values used for calculation of residual error rate ................................................. 58 Table 16 – Values of R
SL (Pe) for different values of n ..........................................................58
Table A.1 – Fault conditions arising from locations beyond the output function block ............ 63
Figure 1 – Relationships of IEC 61784-3 with other standards (machinery) .............................9 Figure 2 – Relationships of IEC 61784-3 with other standards (process) ............................... 10 Figure 3 – Example state diagram......................................................................................... 20 Figure 4 – Use of colors in figures ........................................................................................21 Figure 5 – Scope of FSCP 1/1 ..............................................................................................22 Figure 6 – FSCP 1/1 architecture (H1) .................................................................................. 24 Figure 7 – Black channel ......................................................................................................24 Figure 8 – FSCP 1/1 in system architecture .......................................................................... 28 Figure 9 – FSCP 1/1 H1 device.............................................................................................28 Figure 10 – FSCP 1/1 protocol layers ...................................................................................29 Figure 11 – Relationship between FSCP 1/1 and the other layers of IEC 61158 Type 1 ....... 29 Figure 12 – Key write-lock ....................................................................................................32 Figure 13 – Password write-lock ...........................................................................................32 Figure 14 – Example of FSCP 1/1 communication................................................................. 36 Figure 15 – Example of device description ............................................................................ 38 Figure 16 – Safety PDU showing virtual content....................................................................43 Figure 17 – Safety PDU showing duplication of data and addition of CRC.............................43 Figure 18 – State transition diagram for a FSCP 1/1 Publisher.............................................. 43 Figure 19 – Safety PDU showing duplication of data and addition of CRC.............................45 Figure 20 – Safety PDU showing virtual content....................................................................45 Figure 21 – State transition diagram for a FSCP 1/1 subscriber ............................................ 46 Figure 22 – Safety PDU showing virtual content....................................................................48 Figure 23 – Safety PDU showing virtual content with sub index ............................................ 48 Figure 24 – Safety PDU showing duplication of data, addition of sequence number and CRC ..................................................................................................................................... 48
BS EN 61784-3-1:2010
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 13: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/13.jpg)
– 8 – 61784-3-1 © IEC:2010(E)
Figure 25 – State transition diagram for a FSCP 1/1 Server during read operations .............. 49 Figure 26 – Safety PDU showing duplication of data and addition of sequence number and CRC............................................................................................................................... 50 Figure 27 – Example of FSCP 1/1 write ................................................................................ 50 Figure 28 – Example of FSCP 1/1 write with sub index ......................................................... 50 Figure 29 – State transition diagram for a FSCP 1/1 Server during write operations.............. 51 Figure 30 – Safety PDU showing duplication of data and CRC ..............................................52 Figure 31 – Example of safety function response time components....................................... 56 Figure 32 – Example FSCP 1/1 network topology.................................................................. 57
BS EN 61784-3-1:2010
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 14: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/14.jpg)
61784-3-1 © IEC:2010(E) – 9 –
0 Introduction
0.1 General
The IEC 61158 fieldbus standard together with its companion standards IEC 61784-1 and IEC 61784-2 defines a set of communication protocols that enable distributed control of automation applications. Fieldbus technology is now considered well accepted and well proven. Thus many fieldbus enhancements are emerging, addressing not yet standardized areas such as real time, safety-related and security-related applications.
This standard explains the relevant principles for functional safety communications with reference to IEC 61508 series and specifies several safety communication layers (profiles and corresponding protocols) based on the communication profiles and protocol layers of IEC 61784-1, IEC 61784-2 and the IEC 61158 series. It does not cover electrical safety and intrinsic safety aspects.
Figure 1 shows the relationships between this standard and relevant safety and fieldbus standards in a machinery environment.
IEC 61000-1-2Methodology EMC & FS
IEC 61000-1-2Methodology EMC & FS
Design of safety-related electrical, electronic and program-mable electronic control systems (SRECS) for machinery
ISO 12100-1 and ISO 14121Safety of machinery – Principles for
design and risk assessment
ISO 12100-1 and ISO 14121Safety of machinery – Principles for
design and risk assessment
SIL based PL based
Design objectiveApplicable standards
IEC 60204-1Safety of electrical
equipment
IEC 60204-1Safety of electrical
equipment
IEC 62061Functional safety
for machinery(SRECS)
(including EMC forindustrial environment)
IEC 62061Functional safety
for machinery(SRECS)
(including EMC forindustrial environment)
ISO 13849-1, -2Safety-related parts
of machinery(SRPCS)
Non-electrical
Electrical
ISO 13849-1, -2Safety-related parts
of machinery(SRPCS)
Non-electrical
Electrical
IEC 61508 seriesFunctional safety (FS)
(basic standard)
IEC 61508 seriesFunctional safety (FS)
(basic standard)
IEC 61158 series /IEC 61784-1, -2Fieldbus for use in
industrial control systems
IEC 61158 series /IEC 61784-1, -2Fieldbus for use in
industrial control systems
IEC 61784-3Functional safety communication
profiles
IEC 61784-3Functional safety communication
profiles
IEC 61784-4Security
(profile-specific)
IEC 61784-4Security
(profile-specific)
IEC 61784-5Installation guide(profile-specific)
IEC 61784-5Installation guide(profile-specific)
IEC 61918Installation guide(common part)
IEC 61918Installation guide(common part)
IEC 61326-3-1Test EMC & FS
IEC 61326-3-1Test EMC & FS
IEC 62443Security
(common part)
IEC 62443Security
(common part)
US: NFPA 79(2006)
US: NFPA 79(2006)
IEC 61496Safety f. e.g. light curtains
IEC 61496Safety f. e.g. light curtains
IEC 61800-5-2Safety functions
for drives
IEC 61800-5-2Safety functions
for drives
Product standards
IEC 61131-6Safety for PLC
(under consideration)
IEC 61131-6Safety for PLC
(under consideration)
ISO 10218-1Safety requirements
for robots
ISO 10218-1Safety requirements
for robots
Key(yellow) safety-related standards(blue) fieldbus-related standards(dashed yellow) this standard
NOTE Subclauses 6.7.6.4 (high complexity) and 6.7.8.1.6 (low complexity) of IEC 62061 specify the relationship between PL (Category) and SIL.
Figure 1 – Relationships of IEC 61784-3 with other standards (machinery)
BS EN 61784-3-1:2010
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 15: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/15.jpg)
– 10 – 61784-3-1 © IEC:2010(E)
Figure 2 shows the relationships between this standard and relevant safety and fieldbus standards in a process environment.
IEC 61511 seriesb)
Functional safety –Safety instrumented
systems for the process industry sector
IEC 61511 seriesb)
Functional safety –Safety instrumented
systems for the process industry sector
IEC 61508 seriesFunctional safety (FS)
(basic standard)
IEC 61508 seriesFunctional safety (FS)
(basic standard)
IEC 61158 series / IEC 61784-1, -2Fieldbus for use in
industrial control systems
IEC 61158 series / IEC 61784-1, -2Fieldbus for use in
industrial control systems
IEC 61784-3Functional safety communication
profiles
IEC 61784-3Functional safety communication
profiles
IEC 61784-4Security
(profile-specific)
IEC 61784-4Security
(profile-specific)
IEC 61784-5Installation guide(profile-specific)
IEC 61784-5Installation guide(profile-specific)
IEC 61918Installation guide(common part)
IEC 61918Installation guide(common part)
IEC 61326-3-2a)
EMC andfunctional safety
IEC 61326-3-2a)
EMC andfunctional safety
IEC 62443Security
(common part)
IEC 62443Security
(common part) See safety standards for machinery(Figure 1)
Valid also in process industries,whenever applicable
US:ISA-84.00.01
(3 parts = modifiedIEC 61511)
US:ISA-84.00.01
(3 parts = modifiedIEC 61511)
DE: VDI 2180Part 1-4
DE: VDI 2180Part 1-4
IEC 61496Safety f. e.g. light curtains
IEC 61496Safety f. e.g. light curtains
IEC 61800-5-2Safety functions
for drives
IEC 61800-5-2Safety functions
for drives
Product standards
IEC 61131-6Safety for PLC
(under consideration)
IEC 61131-6Safety for PLC
(under consideration)
ISO 10218-1Safety requirements
for robots
ISO 10218-1Safety requirements
for robots
Key(yellow) safety-related standards(blue) fieldbus-related standards(dashed yellow) this standard
a For specified electromagnetic environments; otherwise IEC 61326-3-1.
b EN ratified.
Figure 2 – Relationships of IEC 61784-3 with other standards (process)
Safety communication layers which are implemented as parts of safety-related systems according to IEC 61508 series provide the necessary confidence in the transportation of messages (information) between two or more participants on a fieldbus in a safety-related system, or sufficient confidence of safe behaviour in the event of fieldbus errors or failures.
Safety communication layers specified in this standard do this in such a way that a fieldbus can be used for applications requiring functional safety up to the Safety Integrity Level (SIL) specified by its corresponding functional safety communication profile.
The resulting SIL claim of a system depends on the implementation of the selected functional safety communication profile within this system – implementation of a functional safety communication profile in a standard device is not sufficient to qualify it as a safety device.
BS EN 61784-3-1:2010
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 16: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/16.jpg)
61784-3-1 © IEC:2010(E) – 11 –
This standard describes:
⎯ basic principles for implementing the requirements of IEC 61508 series for safety-related data communications, including possible transmission faults, remedial measures and considerations affecting data integrity;
⎯ individual description of functional safety profiles for several communication profile families in IEC 61784-1 and IEC 61784-2;
⎯ safety layer extensions to the communication service and protocols sections of the IEC 61158 series.
0.2 Patent declaration
The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents concerning the functional safety communication profiles for family 1 as follows, where the [xx] notation indicates the holder of the patent right:
US 6,999,824 [FF] System and method for implementing safety instrumented systems in a fieldbus architecture
IEC takes no position concerning the evidence, validity and scope of these patent rights.
The holders of these patents rights have assured the IEC that they are willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holders of these patent rights are registered with IEC.
Information may be obtained from:
[FF] Fieldbus Foundation
9005 Mountain Ridge Drive Bowie Bldg. - Suite 190 Austin, TX 78759-5316 USA Tel: +1 512 794 8890
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights.
BS EN 61784-3-1:2010
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.
![Page 17: Industrial communication networks — Profiles](https://reader033.fdocuments.us/reader033/viewer/2022061400/629dbc7799ed85478625d0e7/html5/thumbnails/17.jpg)
– 12 – 61784-3-1 © IEC:2010(E)
INDUSTRIAL COMMUNICATION NETWORKS – PROFILES –
Part 3-1: Functional safety fieldbuses –
Additional specifications for CPF 1
1 Scope
This part of the IEC 61784-3 series specifies a safety communication layer (services and protocol) based on CPF 1 of IEC 61784-1 and IEC 61158 Types 1 and 9. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer.
NOTE 1 It does not cover electrical safety and intrinsic safety aspects. Electrical safety relates to hazards such as electrical shock. Intrinsic safety relates to hazards associated with potentially explosive atmospheres.
This part1 defines mechanisms for the transmission of safety-relevant messages among participants within a distributed network using fieldbus technology in accordance with the requirements of IEC 61508 series2 for functional safety. These mechanisms may be used in various industrial applications such as process control, manufacturing automation and machinery.
This part provides guidelines for both developers and assessors of compliant devices and systems.
NOTE 2 The resulting SIL claim of a system depends on the implementation of the selected functional safety communication profile within this system – implementation of a functional safety communication profile according to this part in a standard device is not sufficient to qualify it as a safety device.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 61131-2, Programmable controllers – Part 2: Equipment requirements and tests
IEC 61158-2, Industrial communication networks – Fieldbus specifications – Part 2: Physical layer specification and service definition
IEC 61158-3-1, Industrial communication networks – Fieldbus specifications – Part 3-1: Data-link layer service definition – Type 1 elements
IEC 61158-4-1, Industrial communication networks – Fieldbus specifications – Part 4-1: Data-link layer protocol specification – Type 1 elements
IEC 61158-5-5, Industrial communication networks – Fieldbus specifications – Part 5-5: Application layer service definition – Type 5 elements
————————— 1 In the following pages of this standard, “this part” will be used for “this part of the IEC 61784-3 series”.
2 In the following pages of this standard, “IEC 61508” will be used for “IEC 61508 series”.
BS EN 61784-3-1:2010
This is a preview of "BS EN 61784-3-1:2010". Click here to purchase the full version from the ANSI store.