Industrial Catalogue copy - Prince Pipes
Transcript of Industrial Catalogue copy - Prince Pipes
INDUSTRIAL CATALOGUE
2020
All
Pro
duct
Boo
klet
/PP
F/E
L/R
ev. N
o. 0
2/N
ovem
ber
2019
. Prin
ted
in N
ovem
ber
2019
Toll Free: 1800 267 7555Please Call between 10 am to 6 pm
www.princepipes.com
Branch Offices:
Delhi: 011-4157 9511 I Pune: 020-2553 7339 I Ahmedabad: 079-269 34013 I Chennai: 044-2616 1899
Corporate Office:
The Ruby, 8th Floor, 29, Senapati Bapat Marg (Tulsi Pipe Road), Dadar (W), Mumbai - 400028, Maharashtra, India.F: 022-6602 2220 E: [email protected]
Mfg. & Exporters of UPVC, CPVC, PPR & HDPE Pipes, Fittings & Valves
/princepipesofficial /Prince_Pipes /Prince Pipes Official
Years old. Years ahead.Established in 1987 with the aim to provide India with Integrated Plastic Piping Systems, PRINCE PIPES AND FITTINGS LTD. has today over 30 years of expertise in manufacturing polymer pipes and around 20 years in fittings. Following stringent quality control measures, we offer end-to-end solutions using four different kinds of polymers: UPVC, CPVC, PPR and HDPE. Currently, we have a wide product range of 7500+ SKUs developed in our 6 state-of-the-art manufacturing units with one coming up soon in Telangana. Today, our products are used for varied applications in sectors like plumbing, irrigation, underground drainage and sewage disposal. Not only that, our prime focus on industrial solutions has today made us the undisputed leader in PP-R, the future of piping industry. All this and a strong dealer network that enables us to service customers across the length and breadth of India. Committed to deliver innovations that pave the way for the future, our journey towards a Zero Defect India continues…
VisionTo be an acknowledged leader in the Indian plastic piping industry by exceeding customer expectations and maximizing bottom line for all our stake holders.
MissionTo bring a revolution in plastic piping industry through innovative solutions which would create a profitable growth and benefit our customers & the society at large.
Index
Manufacturing UnitsState-of-the-art manufacturing units
producing piping systems
Athal(Silvassa) Year of Est.1995
Haridwar(Uttarakhand) Year of Est. 2008
Kolhapur(Maharashtra)Year of Est. 2012
Chennai(Tamil Nadu)Year of Est. 2012
Dadra(Silvassa) Year of Est. 2000
Smartfit 04CPVC Plumbing Systems
Easyfit 06UPVC Plumbing Systems
Greenfit 08PP-R Plumbing Systems
Blue Greenfit 10PP-R Industrial Piping Systems
Rainfit 12Roofwater Systems
Foamfit 14Underground Drainage Piping Systems
Corfit 16Underground Double Wall CorrugatedPipes & Fittings
Aquafit 18Agri-pressure & Non-pressurePipes & Fittings
Jaipur(Rajasthan) Year of Est. 2019
Upcoming PlantSangareddy
(Telangana)
Note:• Dimensions with ‘*’ are not a function of SDR • Fittings are suitable for corresponding pipe pressure ratings
Dimensions
Nominal Bore OutsideDiameter
(Inch)1/2
3/4
1
1 ¼
1 ½
2
(mm)15
20
25
32
40
50
Min(mm)15.80
22.10
28.50
34.80
41.20
53.90
Max(mm)16.00
22.30
28.70
35.00
41.40
54.10
Min(mm)1.70*
2.00
2.60
3.20
3.80
4.90
Max(mm)2.20*
2.50
3.10
3.70
4.30
5.50
At 27°C(Kg/cm2)
28.14
28.14
28.14
28.14
28.14
28.14
At 82°C(Kg/cm2)
6.93
6.93
6.93
6.93
6.93
6.93
Min(mm)1.40*
1.70
2.10
2.60
3.10
4.00
Max(mm)1.90*
2.20
2.60
3.10
3.60
4.60
At 27°C(Kg/cm2)
22.22
22.22
22.22
22.22
22.22
22.22
At 82°C(Kg/cm2)
5.60
5.60
5.60
5.60
5.60
5.60
SDR-11 SDR-13.5Wall Thickness Working Pressure Wall Thickness Working Pressure
Nominal Bore OutsideDiameter
(Inch)2 ½
3
4
6
8
10
(mm)65
80
100
150
200
250
(mm)73.00 (+/- 0.18)
88.90 (+/- 0.20)
114.30 (+/- 0.23)
168.30 (+/- 0.28)
219.10 (+/- 0.38)
273.10 (+/- 0.38)
Min(mm)5.16
5.49
6.02
7.11
8.18
9.27
Max(mm)5.77
6.15
6.73
7.97
9.17
10.39
At 27°C(Kg/cm2)
21.10
18.25
15.49
12.64
11.21
9.89
At 82°C(Kg/cm2)
5.30
4.58
3.87
3.16
2.85
2.44
Min(mm)7.01
7.62
8.56
10.97
12.70
15.06
Max(mm)7.85
8.53
9.58
12.29
14.22
16.86
At 27°C(Kg/cm2)
29.57
26.00
22.53
19.68
17.54
16.21
At 82°C(Kg/cm2)
7.43
6.32
5.60
4.89
4.18
3.87
Schedule 40 Schedule 80Wall Thickness Working Pressure Wall Thickness Working Pressure
Product range• Pipes: 1/2 to 10 inch • Fittings: 1/2 to 6 inch
Standards
Pipes Fittings
ClassSDR 11
SDR 13.5
SCH - 40
SCH - 80
StandardIS 15778
IS 15778
ASTM F 441
ASTM F 441
Size (Inch)1/2 - 2
1/2 - 2
2 ½ - 10
2 ½ - 10
ClassSDR 11
SCH 80
SCH 40
-
StandardASTM D 2846
ASTM F 439
ASTM F 438
-
Size (Inch)1/2 - 2
2 ½ - 4
6
-
End Connection
Solvent Cement Joint
End Connection• Solvent Cement
Sockets Joint.• For transition joints,
fittings with plastic threads & metal threaded inserts.
WHEN THE WATER IS FREEZING.WHEN THE WATER IS BOILING.
Pipes as per:IS 15778
(SDR 11 and 13.5)ASTM F 441
(SCH 40 and 80)
Fittings as per:ASTM D 2846 (SDR 11)ASTM F 438 (SCH 40)ASTM F 439 (SCH 80)
HANDLESOºC to 93ºC
CPVC Plumbing Systems
• Proven hot & cold water performance from 0°C to 93°C
• Manufactured with virgin CPVC compounds ensuring high quality
• Safe for drinking water, no bacterial growth
• Self-extinguishing. Does not support combustion
• UV resistant, hence suitable for outdoor installations that are exposed to direct sunlight
• High impact resistance ensures high quality performance at lower temperatures
• Fast and easy installation. Saves labour
• Lower thermal conductivity so, no or very less insulation required
Features and benefits
Applications
Public utilities, swimming pools
& industrialapplications
For concealed, down take &
terrace looping Hot water
Indoor & outdoor Installations of
hot & cold waterplumbing lines
HEALTHY WORK ENVIRONMENTNEEDS HEALTHY DRINKING WATER
Product range
Standards
Pipes Fittings
Class
SCH - 40
SCH - 80
Standard
ASTM D - 1785
ASTM D - 1785
Size (Inch)
1/2 - 10
1/2 - 10
Class
SCH - 40
SCH - 80
Standard
ASTM D 2466
ASTM D 2467
Size (Inch)
1/2 - 6
1/2 - 4
End Connection
Solvent Cement Joint
and
Threaded Joint
End Connection• Solvent Cement
Socket Joint. • For transition joints,
fittings with plastic threads & metal threaded
inserts are available.
Dimensions
Nominal Bore OutsideDiameter
(Inch)1/2
3/4
1
1 ¼
1 ½
2
2 ½
3
4
6
8
10
(mm)15
20
25
32
40
50
65
80
100
150
200
250
(Kg/cm2)21.34 +/- 0.10
26.67 +/- 0.10
33.40 +/- 0.13
42.16 +/- 0.13
48.26 +/- 0.15
60.32 +/- 0.15
73.02 +/- 0.18
88.90 +/- 0.20
114.30 +/- 0.23
168.28 +/- 0.28
219.10 +/- 0.38
273.00 +/- 0.38
Sch-40 Sch-80
(mm)2.77 + 0.51
2.87 + 0.51
3.38 + 0.51
3.56 + 0.51
3.68 + 0.51
3.91 + 0.51
5.16 + 0.61
5.49 + 0.66
6.02 + 0.71
7.11 + 0.86
8.18 + 0.99
9.27 + 1.12
WallThickness
(mm)3.73 + 0.51
3.91 + 0.51
4.55 + 0.53
4.85 + 0.58
5.08 + 0.61
5.54 + 0.66
7.01 + 0.84
7.62 + 0.91
8.56 + 1.02
10.97 + 1.32
12.70 + 1.52
15.06 + 1.80
WallThickness
(Kg/cm2)42.40
33.75
31.60
26.00
23.25
19.65
21.10
18.25
15.50
12.60
11.20
9.90
WorkingPressure
(Kg/cm2)59.75
48.50
44.25
36.60
33.00
28.10
29.55
26.00
22.50
19.65
17.50
16.20
WorkingPressure
Dimensional & working pressure details for Easyfit UPVC Pipes (Solvent Weld) at 23°C
Working pressure details for Easyfit UPVCFittings (Solvent Weld) at 23°C
Nominal Bore
(Inch)1/2
3/4
1
1 ¼
1 ½
2
2½
3
4
6
(mm)15
20
25
32
40
50
65
80
100
150
Sch-40
(Kg/cm2)25.30
20.25
18.95
15.60
13.95
11.75
--
--
--
7.50
WorkingPressure
Sch-80
(Kg/cm2)35.85
29.10
26.55
21.95
19.80
16.85
17.70
15.60
13.50
--
WorkingPressure
Working pressure for Metal Insert
Fittings is 15Kg/cm2
• Pipes: 1/2 to 10 inch • Fittings: 1/2 to 6 inch
Note: • For threaded pipes & fittings, the working pressure at 23°C shall be considered as 50% of rating
• Pressure rating of UPVC pipes & fittings is temperature related. Derating factor shall be applied for applications at higher temperatures
Fittings as per:ASTM D 2467 (SCH 40)ASTM D 2466 (SCH 80)
Pipes as per:ASTM D 1785 (SCH 40)ASTM D 1785 (SCH 80)
PbPbLEAD-FREE
#Leadfreepipesonly
UPVC Plumbing Systems
• Proven performance for water temperature from 5°C to 60°C
• Lead-free material ensures safe drinking water
• Self-extinguishing. Does not support combustion
• Fast and easy installation. Saves labour
• UV stabilised
Features and benefits
Indoor and outdoor installations
of cold waterplumbing linesApplications
Residentialcomplexes,commercialbuildings
Public utilities, swimming pools
& industrialapplications
For concealed, down take &
terrace looping
UV PROOF OUTSIDE,CHEMICAL RESISTANT INSIDE
Product range
Standards
Dimensions
Nominal Size(Outside Diameter)
(mm)20
25
32
40
50
63
75
90
110
160
Wall Thickness
SDR 11 (PN 10)
(mm)1.90
2.30
2.90
3.70
4.60
5.80
6.80
8.20
10.00
14.60
(mm)2.80
3.50
4.40
5.50
6.90
8.60
10.30
12.30
15.10
21.90
SDR 7.4 (PN 16) SDR 6 (PN 20)
(mm)3.40
4.20
5.40
6.70
8.30
10.50
12.50
15.00
18.30
26.60
Pipes
Size (mm)
20 - 160
Working Pressure (Kg/cm2)
10, 16 & 20
Standard
IS: 15801
End Connection
Poly-fusion welding joint
Colour
Single layer pipes - GreenTriple layer pipe - Outer layer in Green
Inner layer in white Thermax - Black
Fittings
Size (mm)
20 - 160
Working Pressure (Kg/cm2)
20 & 25
Standard
DIN:16962 Green
Colour End Connection
• Socket ends suitable for fusion welding.• For transition joints, fittings with threaded
metal inserts
• Pipes: 20 to 160 mm Single layer & Triple layer • Fittings: 20 to 160 mm • Coil: 20 to 50 mm
Pipes as perIS 15801
Fittings as perDIN 16962
100% PPRC
Used inmanufacturing of the
pipes & fittings
• Proven hot & cold water performance from -0° C to 95° C
• No rust, corrosion can withstand higher ‘pH’ values
• UV resistant triple layered pipes are suitable for outdoor installations that are exposed to direct sunlight
• Good chemical resistance - suitable for most industrial liquids
• Heat-fusion jointing results in homogenous plastic system ensuring leak-proof joints
• Very less coefficient of friction, ensures high flow properties, reduce pumping cost
• Antimicrobial inside layer of 3 layered pipe adds to safety against bacterial growth ensuring safe drinking water
• Specially formulated thermax pipes reduce linear expansion / contraction of pipes due to temperature variance, ensuring suitability for outdoor application
Features and benefits
Application note: Insulation is necessary at Sub Zero Temperature.
Applications
Solar waterheating systems
Indoor & outdoor installations of hot &
cold water piping systems in residential,
commercial & buildings
Drinking water & liquid food
transportation
Aggresive Chemcials & PharmaceuticalsPiping systems for
conveyance of aggressive fluids in
Industries
PP-R Plumbing & IndustrialPiping Systems
A ZERO DEFECT SOLUTION FORCOMPRESSED AIR APPLICATIONS
Pipes as perIS 15801
Fittings as perDIN 16962
Dimensions
Nominal Size(Outside Diameter)
(mm)20
25
32
40
50
63
75
90
110
160
Wall Thickness
SDR 11 (PN 10)(mm)1.90
2.30
2.90
3.70
4.60
5.80
6.80
8.20
10.00
14.60
(mm)2.80
3.50
4.40
5.50
6.90
8.60
10.30
12.30
15.10
21.90
SDR 7.4 (PN 16) SDR 6 (PN 20)(mm)3.40
4.20
5.40
6.70
8.30
10.50
12.50
15.00
18.30
26.60
Overview
Product range• Pipes: 20 to 160 mm as per PN 10 & PN 16 PN 20 • Fittings: 20 to 160 mm as per PN 20 & PN25
Standards
Pipes
Size (mm)
20 - 160
Working Pressure (Kg/cm2)
10, 16 & 20
Standard
IS: 15801
End Connection
Poly-fusion welding joint
Colour
Single layer pipes - Blue, Triple layer pipe - Outer layer in Blue
Inner layer in White
Fittings
Size (mm)
20 - 160
Working Pressure (Kg/cm2)
20 & 25
Standard
DIN:16962 Blue
Colour End Connection
Socket ends suitable for poly-fusion welding.For transition joints, fittings with threaded
metal inserts.
Compressed air, one of the major sources of industrial energy is being used increasingly in manufacturing and process industries. Modern process equipment, pneumatic controls and instruments need clean and uncontaminated air supply for their smooth functioning. In the past few decades, development of more advanced-design compressors and ancillary equipments was heavily felt. So, what we need is a new-age solution for compressed air and vacuum lines. Blue Greenfit industrial piping systems. Made of Polypropylene Random Copolymer (PPRC or commonly known as PP-R material) which can withstand temperatures from -0ºC up to 95ºC. Blue Greenfit is at par with global industry standards and is ideal for pneumatic applications.
*Refer to the chemcial chart printed Greenfit Technical Manual
• Proven hot & cold water performance from -0° C to 95° C
• No scaling. Can withstand higher ‘pH’ values
• UV resistant triple layered pipes are suitable for outdoor installations that are exposed to direct sunlight
• Good chemical resistance - suitable for most industrial liquids
• Heat-fusion jointing results in homogenous plastic system ensuring leak-proof joints
• Specially formulated thermax pipes reduce linear expansion / contraction of pipes due to temperature variance, ensuring suitability for outdoor application
Features and benefits
Application note: Insulation is necessary at Sub Zero Temperature.
Applications
PRIMARY USAGES- Compressed Air Lines
- Instrument Air- Nitrogen Air
PP-R Industrial Piping Systems
GREAT PRODUCTION ISALSO ABOUT CONSERVATION
Standards
Pipes Fittings
Size (mm)
Half Round Pipes - 140, 180, 250
Downtake Pipes - 75, 110, 160
Size (mm)
75, 110, 140, 160, 180, 250
End Connection
• Elastomeric rubber sealwith clamps for halfround pipes.
• Solvent Joint & Rubber ring Joint for Down take pipes
Elastomeric rubber seal
with clamps
End Connection
Product range• Fittings: (PP) 75, 110, 140, 160, 180, 250 mm
• Pipes:Half Round Pipes (uPVC) - 140, 180, 250 mmDowntake Pipes (uPVC) - 75, 110, 160 mm
Rainfit Roofwater Systems are broadly used for collection and conveyance of rainwater. These specifically include storage in tanks and pits, recharging borewells, shafts and wells; and augmenting the underground water table through a proper mechanism to percolate soil.
Overview
Ideal for roof-top rain water storage
• Advanced system design ensures effective collection of roof water and efficient discharge
• High mechanical and chemical strength can withstand aggressive environment
• Light weight, easy to handle, store and transport
• Easy to install Saves cost
• Long service life
• UV stabilized - can be installed in areas directly exposed to sunlight
• Smooth and glossy appearance gives it an attractive look
Features and benefits
Applications
Public placessuch as railwayplatform sheds,
vehicle parking sheds,hotels, schools &
institutions
Residentialbuildings/ bungalows,warehouses & factory
sheds as well ascommercialbuildings
Roofwater Systems
LIGHT WEIGHT SOLUTION FORLONG LASTING DRAINAGE APPLICATION
Pipes as perIS 16098
An advanced drainage and sewerage solution, these multi-layer pipes are ideal for for housing and government developments . While the outer and innermost layers give the pipe a great load bearing capacity, the middle layer provides firmness to the overall pipe structure. In short, better strength with a lighter weight as compared to solid wall PVC pipes.
Overview
Standards
Pipes Fittings
Size (mm)
SN 2 - 160, 200, 250, 315SN 4 - 110, 160, 200, 250, 315SN 8 - 110, 160, 200, 250, 315
Standard
IS 16098
(part 1)
Size (mm)
75, 110 & 160Elastomeric Sealing
Ring Joint & Solvent Joint
End Connection
Elastomeric Sealing
Ring Joint & Solvent Joint
End Connection
Product range• Pipes: 110, 160, 200, 250, 315 mm
Dimensions
(mm)110
160
200
250
315
Nominal Size(Outside Diameter)
Mean OutsideDiameter
Wall Thickness
Minimum(mm)
110.00
160.00
200.00
250.00
315.00
Maximum(mm)
110.40
160.50
200.60
250.80
316.00
Maximum(mm)3.30
4.60
5.60
7.00
8.70
Maximum(mm)3.70
5.40
6.70
8.30
10.40
Maximum(mm)
-
3.70
4.50
5.60
7.00
(mm)3.20
4.70
5.90
7.30
9.20
MinimumMinimum(mm)2.80
4.00
4.90
6.20
7.70
SN2 (SDR 51) SN4 (SDR 41) SN8 (SDR 34)Minimum
(mm)-
3.20
3.90
4.90
6.20
• Fittings: 75, 110 & 160 mm
FOAMFIT
LOW DENSITYCELLULAR COREFOAMED PVC LAYER
SOLID PVC INNER & OUTER LAYER
• Lighter than solid wall UPVC pipe yet strong
• Easy for underground installations
• Available in long length of 6 meter so minimum joints ensuring less chances of leakage
• Compatible with other drainage & sewerage products
• Long life due to improved strength
• Cost saving
• Easy to install
• Anti rodent
Features and benefits
Applications
Underground drainage systems
Underground Drainage Piping Systems
A REVOLUTION TODAY FORA CLEANER INDIA TOMORROW
Pipes as perIS 16098-2
StandardsPipes Fittings
Size (mm)
100 to 1000
Class
SN4 & SN8
Standard
IS 16098 - Part 2 -
Size (mm)
100 to 500
StandardEnd Connection
Rubber Ring
Joint
Rubber Ring
Joint
End Connection
Dimensions
Pipe Sizes
(mm)100
150
170
200
250
300
400
500
600
800
1000
Socket Length (min)
(mm)32
43
48
54
59
64
74
85
96
118
140
Product rangePipes: 100 to 1000 mm nominal diameterFittings: 100 to 500 mm
Corfit DWC* Pipes and fittings are manufactured using HDPE polymer. These pipes are resistant to various types of gases & chemicals which are generated due to putrefaction of various ingredients flowing in the system.
Corfit DWC* Pipes are manufactured as per IS 16098 (Part-2), have a smooth internal surface and corrugated external surface. The corrugated external surface provides greater stiffness, withstands soil movements & takes higher loads (static & dynamic), whereas the internal surface helps in smooth flow of sewerage.
*DWC - Double Wall Corrugated
Overview
• Easy to handle, transport and store
• Easy to install
• Superior performance than RCC Pipes
• Long life
• Available in long length of 6 meter so minimum joints ensuring less chances of leakage
• Corrosion & abrasion resistant
• Anti-rodent material
Features and benefits
Applications
Undergrounddrainage
Highway &road drainage
Industrialliquid waste
Storm water& surface water
drainage
Sewerage
Underground Double Wall Corrugated Pipes
GREAT DISPOSAL POWERWHEN YOU WANT TO DRAIN IT FAR
Pipes as perIS 4985
Fittings as perIS 7834
Product range
Standards
Pressure & Non-Pressure Pipes are manufactured in accordance with IS:4985 covering a complete range from 20 mm to 400 mm. They are available in pressure rating 2.5 Kg/cm², 4 Kg/cm², 6 Kg/cm², 8 Kg/cm², 10 Kg/cm², 12.5 Kg/cm² & 16 Kg/cm² as defined in IS:4985. The pipes are provided with plain socket and suitable for solvent cement jointing.
Their main application is in agriculture for water supply, drip irrigation & sprinkler lines etc. as well as for drinking water distribution. However, these can also be used in cable ducting, ventilation pipe lines & slurry lines etc.
They are available in light grey colour and nominal length of 6 mtrs.
Pipes Fittings
Size (mm)
20 to 400
Working Pressure(Kg/cm2)
2.5, 4, 6, 8, & 12.5
Standard
IS 4985
End Connection
Solvent Joint
Size (mm)
20 to 250
Working Pressure(Kg/cm2)
4, 6, 10 & 16
Standard
IS 7834
End Connection
Solvent Joint, Threads (For transition fittings)
• Light weight, easy to transport, store, handle and install. Saves labour
• Smooth bore ensures higher flow compared to G.I pipes and fittings of the same size. No clogging. Saves operational cost
• Solvent cement joint therefore quick installation
• Corrosion resistance, UPVC is rustproof material therefore bore diameter remains constant, ensuring constant flow over a lifetime
• Long working life (if operated under normal/ recommended working conditions)
• Cost effective. Added value for your money
Features and benefits
• Pipes: 20 to 400 mm • Fittings: 20 to 250 mm
Overview
In agricultureWater supply and
distribution schemes In agriculture
Irrigation
OthersDrinking water
supply anddistribution
Slurry lines
HVAC drain pipe
Cooling tower
Cable ducting
Ventilation pipe line
Applications
PbPbLEAD-FREE
#Leadfreepipesonly
Dimensions for Aquafit pipes
Note: Pipes available with ISI mark except 400 mm.
Mean SocketInternal
Diameter ofMid Point of
SocketLength
MeanOutside
DiameterClass 1
0.25 MPa2.5 Kg/cm2
Class 20.40 MPa
4.0 Kg/cm2
Class 30.60 MPa
6.0 Kg/cm2
Class 40.80 MPa
8.0 Kg/cm2
Class 51.00 MPa
10.0 Kg/cm2
Class 61.25 MPa
12.5 Kg/cm2
Wall ThicknessNominalOutside
Diameter(Nominal
Size)
20
25
32
40
50
63
75
90
110
125
140
160
180
200
225
250
280
315
355
400
(mm)
20.0
25.0
32.0
40.0
50.0
63.0
75.0
90.0
110.0
125.0
140.0
160.0
180.0
200.0
225.0
250.0
280.0
315.0
355.0
400.0
Min(mm)
-
-
-
-
-
-
-
1.3
1.6
1.8
2.0
2.3
2.6
2.9
3.3
3.6
4.1
4.6
5.1
5.8
Min(mm)
-
-
-
-
-
1.5
1.8
2.1
2.5
2.9
3.2
3.7
4.2
4.6
5.2
5.7
6.4
7.2
8.1
9.1
Min(mm)
-
-
-
1.4
1.7
2.2
2.6
3.1
3.7
4.3
4.8
5.4
6.1
6.8
7.6
8.5
9.5
10.7
12.0
13.5
Min(mm)
-
1.2
1.5
1.8
2.3
2.8
3.4
4.0
4.9
5.6
6.3
7.2
8.0
8.9
10.0
11.2
12.5
14.0
15.8
17.8
Min(mm)
1.1
1.4
1.8
2.2
2.8
3.5
4.2
5.0
6.1
6.9
7.7
8.8
9.9
11.0
12.4
13.8
15.4
17.3
19.6
22.0
Min(mm)
1.4
1.7
2.2
2.8
3.4
4.3
5.1
6.1
7.5
8.5
9.5
10.9
12.2
13.6
15.3
17.0
19.0
21.4
24.1
27.2
Min(mm)
20.1
25.1
32.1
40.1
50.1
63.1
75.1
90.1
110.1
125.1
140.2
160.2
180.2
200.3
225.3
250.4
280.4
315.4
355.4
400.4
Min(mm)
20.3
25.0
32.3
40.3
50.3
63.3
75.3
90.3
110.4
125.4
140.5
160.5
180.6
200.6
225.7
250.8
280.9
316.0
356.1
401.2
Max(mm)
-
-
-
-
-
-
-
1.7
2.0
2.2
2.4
2.8
3.1
3.4
3.9
4.2
4.8
5.3
5.9
6.7
Max(mm)
-
-
-
-
-
1.9
2.2
2.6
3.0
3.4
3.8
4.3
4.9
5.3
6.0
6.5
7.4
8.3
9.4
10.5
Max(mm)
-
-
-
1.8
2.1
2.7
3.1
3.7
4.3
5.0
5.5
6.2
7.1
7.9
8.8
9.8
11.0
12.4
13.8
15.6
Max(mm)
-
1.6
1.9
2.2
2.8
3.3
4.0
4.6
5.6
6.4
7.3
8.3
9.2
10.3
11.5
12.9
14.4
16.1
18.2
20.5
Max(mm)
1.5
1.8
2.2
2.7
3.3
4.1
4.9
5.7
7.1
8.0
8.9
10.2
11.4
12.7
14.3
15.9
17.8
19.9
22.6
25.3
Max(mm)
1.8
2.1
2.7
3.3
4.0
5.0
5.9
7.1
8.7
9.8
11.0
12.6
14.1
15.7
17.6
19.6
21.9
24.7
27.8
31.3
Max(mm)
20.3
25.3
32.3
40.3
50.3
63.3
75.3
90.3
110.4
125.4
140.5
160.5
180.5
200.6
225.7
250.8
280.9
316.0
356.0
401.0
Max(mm)
Properties of UPVC Pipes
Standards, Quality Control and Testing
Hazen - William’s Flow Co-efficient Comparison
Pressure Rating vs Temperature Derating Factor
MechanicalTensile Strength : 415 - 525 Kg/cm2
Compression Strength : 550 - 910 Kg/cm2
Flexural Strength : 680 - 1100 Kg/cm2
Izod Impact Strength : 4 - 5 Kg/cm2
Shore Hardness : D 65 - 85
ThermalCo-efficient of Linear Expansion : 0.08 mm/M°C
Vicat Softening Temperature : >78°C
Max. Operating Temperature : 60°C
The manufacturing and testing is done for pipes in accordance with IS: 4985 All the above pipes, except non-pressure pipes are tested for potable water supplies in accordance with their relevant standards and as per the test methods given in IS: 12235
G. I.
110
Pipe Material
Flow Co-efficient
PVC
150
A. C.
130
C. I.
100
As the temperature of fluid flowing through installation increases, the pressure withstanding capacity of installation wall decreases. So to find out the pressure rating of PVC Pipes & Fittings at required temperature, multiply, the pressure rating of Pipes & Fittings by derating factor given in table.
Example:Rated pressure of installed system 10 Kg,
Up to 25°C, the system can stand 10 Kg pressure,
If Temperature is 40°C, derating factor is 0.71,
Therefore 10 x 0.71 = 7.1 Kg.
So, the system can withstand 7.1 Kg.
0-25
27
30
35
40
45
50
55
60
Temp Deg (C ) Derating factor
1
0.95
0.89
0.79
0.71
0.63
0.42
0.34
0.25