INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC...
Transcript of INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC...
![Page 1: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/1.jpg)
INDUSTRIAL CABLES CATALOGUE
INSTRUMENTATION CABLESFOUNDATION FIELDBUS CABLESTHERMOCOUPLE CABLESCONTROL CABLES
Innovation, Commitment, Appreciation, Respect and Excellence W www.saudicable.com
![Page 2: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/2.jpg)
Introduction
Satisfying today’s demands for Power & Telecommunications Systems is the business of Saudi Cable Company (SCC) Group, the Middle East’s foremost provider of technologically advanced cable solutions and services. Conceived in 1975, the company has now come to be globally recognized for its excellence in product design and engineering, as well as its world class total solution services, by various governmental agencies, oil, gas and petrochemical industries and public utilities worldwide. SCC’s factory, located in Industrial City, Jeddah, consists of ultra-modern facilities, high-tech machinery and a well-equipped laboratory, built for conducting various routine and type tests. It operates with a clearly defined and documented Quality System set in accordance with the guidelines of ISO 9001:2008 for all its activities, right from the product design, engineering, to the selection of raw material, suppliers, schedule planning, production and testing, then the delivery of cables, with a policy of total customer satisfaction. SCC’s cable products are manufactured to International Standards, tested and certified by prestigious institutions such as Underwriters Laboratories (UL), British Standards Institution (BSI), International Electrotechnical Commission (IEC), European Standards (EN), Saudi
ARAMCO Material Supply Specification (SAMSS), SABIC (Saudi Basic Industries Companies), Royal Commission for Jubail & Yanbu, Saudi Arabian Standards Organization (SASO), Saudi National Grid – Saudi Electricity Company (SEC), SWCC (Saudi Water Conversion Corporation) Saudi Telecom Company (STC) etc. SCC manufactured cables are approved by all major organizations in Saudi Arabia such as: Saudi National Grid – SEC, SAUDI ARAMCO, SABIC, Royal commission of Jubail and Yanbu, SWCC, STC, and others, as well as in all major organizations in the GCC (Bahrain, Kuwait, Qatar, Oman & United Arab Emirates) and MENA (Middle East and North Africa). This catalogue covers Instrumentation, Foundation Field Bus, Thermocouple, Fire Resistant and Lead Sheathed Cables and gives illustrative technical parameters for each cable. However, this range isn’t restricted since SCC Cables’ true value lies in the adaptation of the products according to the customer requirements and specifications.
![Page 3: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/3.jpg)
T A B L E O F C O N T E N T S
Pages
Ul 13 / ul 2250, pltc/itc , 90°c / 300v, sunlight & oil resistant, flame retardant 03
Single pair/triad, xlpe/pvc, unshielded, unarmoured instrumentation cable 04
Single pair/triad, xlpe/pvc, shielded, unarmoured instrumentation cable 05
Multi pair/triad, xlpe/pvc, unshielded, unarmoured instrumentation cable 06
Multi pair/triad, xlpe/pvc, unshielded with overall shield, unarmoured instrumentation cable 09
Multi pair/triad, xlpe/pvc with individual and overall shield, unarmoured instrumentation cable 12
Single pair/triad, xlpe/pvc, unshielded, steel wire armoured, instrumentation cable 15
Single pair/triad, xlpe/pvc, shielded, steel wire armoured instrumentation cable 16
Multi pair/triad, xlpe/pvc, unshielded, steel wire armoured instrumentation cable 17
Multi pair/triad, xlpe/pvc, unshielded with overall shield, steel wire armoured instrumentation cable 20
Multi pair/triad, xlpe/pvc with individual and overall shield, steel wire armoured instrumentation cable 23
Foundation fieldbus cable to iec 61158-2 type a. 26
Single pair, xlpe, shielded, unarmoured, foundation fieldbus cable 27
Multi pair, xlpe with individual and overall shield, unarmoured, foundation fieldbus cable 28
Single pair, xlpe, shielded, steel wire armoured, foundation fieldbus cable 29
Multi pair, xlpe with individual and overall shield, steel wire armoured, foundation fieldbus cable 30
Thermocouple cables to ansi mc 96.1 And iec 60584 31
Single pair, xlpe/pvc, unshielded, unarmoured, thermocouple cables 32
Single pair, xlpe/pvc, shielded, unarmoured thermocouple cables 33
Multi pair, xlpe/pvc, unshielded, unarmoured thermocouple cables 34
Multi pair, xlpe/pvc, unshielded with overall shield, unarmoured thermocouple cables 36
Multi pair, xlpe/pvc with individual and overall shield, unarmoured thermocouple cables 38
Single pair, xlpe/pvc, unshielded, steel wire armoured thermocouple cables 40
Single pair, xlpe/pvc, shielded, armouredthermocouple cables 41
Multi pair, xlpe/pvc. unshielded, steel wire armoured thermocouple cables 42
Multi pair, xlpe/pvc, unshielded, with overall shield, steel wire armoured, thermocouple cables 44
Multi pair, xlpe/pvc with individual and overall shield, steel wire armoured thermocouple cables 46
Ul 1277, tc, 90°c / 600v, sunlight & oil resistant, flame retardant 48
Single pair/triad, xlpe/pvc, unshielded, unarmoured instrumentation cable 49
Single pair/triad, xlpe/pvc, shielded unarmoured instrumentation cable 50
Multi pair/triad, xlpe/pvc, unshielded, unarmoured instrumentation cables 51
Multi pair/triad, xlpe/pvc, unshielded with overall shield, unarmoured instrumentation cables 53
Multi pair/triad, xlpe/pvc with individual and overall shield, unarmoured instrumentation cables 55
En 50288-7, 500v, cross linked polyethylene insulated cables (xlpe 90°c) and (pvc 90°c) insulated cables 57
Single pair/triad shielded, unarmoured instrumentation cable 58
Single pair/triad shielded, steel wire armoured instrumentation cable 59
Multi twisted pair/triad, unshielded with overall shield, unarmoured instrumentation cables 60
Multi twisted pair/triad with individual and overall shield, unarmoured instrumentation cable 63
Multi twisted pair/triad, unshielded with overall shield, steel wire armoured instrumentation cable 66
Multi twisted pair/triad with individual and overall shield, steel wire armoured instrumentation cable 69
Single pair/triad shielded, pvc bedded, lead alloy sheathed, pvc bedded, steel wire armoured and pvc sheathed instrumentation cable 72
Multi twisted pair/triad, unshielded, with overall shield, pvc bedded, lead alloy sheathed, pvc bedded, steel wire armoured and pvc sheathed instrumentation cable 73
Multi twisted pair/triad, with individual and overall shield, pvc bedded, lead alloy sheathed, pvc bedded, steel wire armoured, and pvc sheathed instrumentation cable 76
Complete TOC when finished
![Page 4: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/4.jpg)
Page 03 Industrial Cables
A P P L I C A T I O N
• The cables are recommended for indoor and outdoor installation in dry and wet locations, in cable racks and trays, in conduits and suitable for direct burial.
• For Transmission of analogue and digital signals in instrument and control systems; allowed for use in hazardous classified locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources, e.g. Public mains electricity supply.
A. ELECTRICAL PROPERTIES OF INSTRUMENTATION CABLES – TYPE PLTC/ITC – 300V
Conductor size (AWG) 12 14 16 18
Conductor Resistance @ 20°CPlain Cu
(Ω / km) max.5.63 8.95 14.25 22.80
Tinned Cu 5.83 9.3 14.9 23.6
Mutual Capacitance @ 1 KhzXLPE
(nF/km) max.≤150 ≤150 ≤150 ≤150
PVC ≤250 ≤250 ≤250 ≤250
L/R ratio µH/Ω max. ≤80 ≤60 ≤40 ≤25
Insulation ResistanceXLPE
MΩ – Km min. 30.50 30.50 30.50 30.50PVC
Test Voltage Core/Core (Urms)Core/shield (Urms)
XLPEV max. 1500 1500 1500 1500
PVC
PHYSICAL PROPERTIES
Flame Retardancy Passes UL 1685 vertical tray flame test & IEC 60332-3 Cat. A or C
Sunlight Resistance Passes UL-1581 test (720 hours)
Oil Resistance Passes UL-13 test (Oil I)
Minimum Bending Radius7.5 x Cable Outside Diameter (for unarmoured cables)10 x Cable Outside Diameter (for armoured cables)
Temperature Range (operation)During Operation: -30°C to +90°CDuring Installation: -5°C to +50°C
INSULATION AND JACKET COLOURS
Pair colour Black & White. Other pair colours are available upon request.
Triad colour Black, White and Red. Other triad colours are available upon request.
Jacket colour Black. Other colours are available upon request.
Single & Multipair and Multi-Triple, individual and/or overall screen, PVC- sheath
Cable Features:UnarmouredArmoured
Common Cable Construction:Conductor Type– Plain Copper– Tinned Coated Copper
Insulation Material– XLPE 90°C– PVC 90°C
Unarmoured
Armoured– Galvanised Steel Wires– Double Steel Tape
Jackets– PVC Flame Retardant, Oil and
Sunlight Resistant– Low Smoke Zero Halogen Free
UL 13 / UL 2250, PLTC/ITC , 90°C / 300V, SUNLIGHT & OIL RESISTANT, FLAME RETARDANT
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 5: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/5.jpg)
Page 04Industrial Cables
SINGLE PAIR XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS
SINGLE TRIAD XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Stranded Plain/Tinned Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Black).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01PC2-J-XFYu XLPE18 0.66 0.90 8.45
5101PC2-J-YaYu PVC 6001PC2-H-XFYu XLPE
16 0.66 1.02 9.3068
01PC2-H-YaYu PVC 8001PC2-I-XFYu XLPE
14 0.66 1.02 10.088
01PC2-I-YaYu PVC 10001PC2-G-XFYu XLPE
12 0.66 1.07 11.0118
01PC2-G-YaYu PVC 130
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01TC2-J-XFYu XLPE18 0.66 1.02 9.10
6901TC2-J-YaYu PVC 8001TC2-H-XFYu XLPE
16 0.66 1.02 9.7588
01TC2-H-YaYu PVC 10001TC2-I-XFYu XLPE
14 0.66 1.02 10.60116
01TC2-I-YaYu PVC 13001TC2-G-XFYu XLPE
12 0.66 1.27 12.10171
01TC2-G-YaYu PVC 190
1234
SINGLE PAIR/TRIAD, XLPE/PVC, UNSHIELDED, UNARMOURED INSTRUMENTATION CABLE
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 6: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/6.jpg)
Page 05 Industrial Cables
SINGLE PAIR XLPE/PVC SHIELDED CABLE – DIMENSIONS AND WEIGHTS
SINGLE TRIAD XLPE/PVC SHIELDED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Stranded Plain/Tinned Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Screening/Shielding: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Black).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01PC2-J-XFOSYu XLPE18 0.66 0.90 8.80
5801PC2-J-YaOSYu PVC 6501PC2-H-XFOSYu XLPE
16 0.66 1.02 9.6576
01PC2-H-YaOSYu PVC 8501PC2-I-XFOSYu XLPE
14 0.66 1.02 10.4596
01PC2-I-YaOSYu PVC 11001PC2-G-XFOSYu XLPE
12 0.66 1.02 11.35126
01PC2-G-YaOSYu PVC 140
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01TC2-J-XFOSYu XLPE18 0.66 1.02 9.50
7701TC2-J-YaOSYu PVC 9001TC2-H-XFOSYu XLPE
16 0.66 1.02 10.1096
01TC2-H-YaOSYu PVC 11001TC2-I-XFOSYu XLPE
14 0.66 1.02 10.90124
01TC2-I-YaOSYu PVC 14001TC2-G-XFOSYu XLPE
12 0.66 1.27 12.50180
01TC2-G-YaOSYu PVC 200
12345
SINGLE PAIR/TRIAD, XLPE/PVC, SHIELDED, UNARMOURED INSTRUMENTATION CABLE
UL 13 / UL 2250, PLTC / ITC, 90°C / 300V SUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 7: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/7.jpg)
Page 06Industrial Cables
1. Conductor: Stranded Plain/Tinned Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Black).
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-J-XFYu XLPE18 2 0.66 1.27 12.50
10802PC2-J-YaYu PVC 12604PC2-J-XFYu XLPE
18 4 0.66 1.27 14.15168
04PC2-J-YaYu PVC 19006PC2-J-XFYu XLPE
18 6 0.66 1.27 16.55231
06PC2-J-YaYu PVC 25008PC2-J-XFYu XLPE
18 8 0.66 1.52 18.90312
08PC2-J-YaYu PVC 33510PC2-J-XFYu XLPE
18 10 0.66 1.52 21.15378
10PC2-J-YaYu PVC 39012PC2-J-XFYu XLPE
18 12 0.66 1.52 21.80431
12PC2-J-YaYu PVC 45016PC2-J-XFYu XLPE
18 16 0.66 1.78 24.60574
16PC2-J-YaYu PVC 67524PC2-J-XFYu XLPE
18 24 0.66 1.78 30.00815
24PC2-J-YaYu PVC 95536PC2-J-XFYu XLPE
18 36 0.66 2.03 34.501183
36PC2-J-YaYu PVC 138502PC2-H-XFYu XLPE
16 2 0.66 1.27 13.40168
02PC2-H-YaYu PVC 17004PC2-H-XFYu XLPE
16 4 0.66 1.27 15.35216
04PC2-H-YaYu PVC 24006PC2-H-XFYu XLPE
16 6 0.66 1.52 18.55322
06PC2-H-YaYu PVC 37008PC2-H-XFYu XLPE
16 8 0.66 1.52 20.60407
08PC2-H-YaYu PVC 46010PC2-H-XFYu XLPE
16 10 0.66 1.52 23.15495
10PC2-H-YaYu PVC 57012PC2-H-XFYu XLPE
16 12 0.66 1.78 24.40598
12PC2-H-YaYu PVC 65016PC2-H-XFYu XLPE
16 16 0.66 1.78 27.00758
16PC2-H-YaYu PVC 87024PC2-H-XFYu XLPE
16 24 0.66 1.78 32.851087
24PC2-H-YaYu PVC 125036PC2-H-XFYu XLPE
16 36 0.66 2.03 38.001586
36PC2-H-YaYu PVC 1820
MULTI PAIR XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
12345
MULTI PAIR/TRIAD, XLPE/PVC, UNSHIELDED, UNARMOURED INSTRUMENTATION CABLE
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 8: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/8.jpg)
Page 07 Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-J-XFYu XLPE18 2 0.66 1.27 13.65
14002TC2-J-YaYu PVC 17504TC2-J-XFYu XLPE
18 4 0.66 1.27 15.60226
04TC2-J-YaYu PVC 27506TC2-J-XFYu XLPE
18 6 0.66 1.27 18.85336
06TC2-J-YaYu PVC 40008TC2-J-XFYu XLPE
18 8 0.66 1.52 20.95425
08TC2-J-YaYu PVC 51010TC2-J-XFYu XLPE
18 10 0.66 1.52 23.55517
10TC2-J-YaYu PVC 62512TC2-J-XFYu XLPE
18 12 0.66 1.52 24.85625
12TC2-J-YaYu PVC 75016TC2-J-XFYu XLPE
18 16 0.66 1.78 27.40793
16TC2-J-YaYu PVC 95024TC2-J-XFYu XLPE
18 24 0.66 1.78 34.01178
24TC2-J-YaYu PVC 139036TC2-J-XFYu XLPE
18 36 0.66 2.03 38.701664
36TC2-J-YaYu PVC 1950
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-I-XFYu XLPE14 2 0.66 1.27 14.70
17502PC2-I-YaYu PVC 20004PC2-I-XFYu XLPE
14 4 0.66 1.27 16.85291
04PC2-I-YaYu PVC 33506PC2-I-XFYu XLPE
14 6 0.66 1.52 20.40433
06PC2-I-YaYu PVC 49508PC2-I-XFYu XLPE
14 8 0.66 1.52 22.75553
08PC2-I-YaYu PVC 60010PC2-I-XFYu XLPE
14 10 0.66 1.78 26.15706
10PC2-I-YaYu PVC 79512PC2-I-XFYu XLPE
14 12 0.66 1.78 27.00815
12PC2-I-YaYu PVC 91016PC2-I-XFYu XLPE
14 16 0.66 1.78 29.801043
16PC2-I-YaYu PVC 117024PC2-I-XFYu XLPE
14 24 0.66 2.03 37.151552
24PC2-I-YaYu PVC 175036PC2-I-XFYu XLPE
14 36 0.66 2.03 42.352215
36PC2-I-YaYu PVC 249002PC2-G-XFYu XLPE
12 2 0.66 1.27 16.20234
02PC2-G-YaYu PVC 28004PC2-G-XFYu XLPE
12 4 0.66 1.52 19.25421
04PC2-G-YaYu PVC 48506PC2-G-XFYu XLPE
12 6 0.66 1.52 22.70598
06PC2-G-YaYu PVC 68008PC2-G-XFYu XLPE
12 8 0.66 1.78 26.0799
08PC2-G-YaYu PVC 90510PC2-G-XFYu XLPE
12 10 0.66 1.78 29.25979
10PC2-G-YaYu PVC 110512PC2-G-XFYu XLPE
12 12 0.66 1.78 30.201138
12PC2-G-YaYu PVC 126016PC2-G-XFYu XLPE
12 16 0.66 2.03 34.01507
16PC2-G-YaYu PVC 166024PC2-G-XFYu XLPE
12 24 0.66 2.03 41.752188
24PC2-G-YaYu PVC 240036PC2-G-XFYu XLPE
12 36 0.66 2.29 48.303212
36PC2-G-YaYu PVC 3500
MULTI TRIAD XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS
MULTI PAIR XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
![Page 9: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/9.jpg)
Page 08Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements(Triad )
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-H-XFYu XLPE16 2 0.66 1.27 14.80
17802TC2-H-YaYu PVC 21004TC2-H-XFYu XLPE
16 4 0.66 1.52 17.50315
04TC2-H-YaYu PVC 34506TC2-H-XFYu XLPE
16 6 0.66 1.52 20.55441
06TC2-H-YaYu PVC 51008TC2-H-XFYu XLPE
16 8 0.66 1.52 22.90563
08TC2-H-YaYu PVC 65510TC2-H-XFYu XLPE
16 10 0.66 1.78 26.40719
10TC2-H-YaYu PVC 82512TC2-H-XFYu XLPE
16 12 0.66 1.78 27.20830
12TC2-H-YaYu PVC 94016TC2-H-XFYu XLPE
16 16 0.66 1.78 30.101063
16TC2-H-YaYu PVC 121024TC2-H-XFYu XLPE
16 24 0.66 2.03 37.401581
24TC2-H-YaYu PVC 181036TC2-H-XFYu XLPE
16 36 0.66 2.29 43.252309
36TC2-H-YaYu PVC 259002TC2-I-XFYu XLPE
14 2 0.66 1.27 16.20235
02TC2-I-YaYu PVC 27004TC2-I-XFYu XLPE
14 4 0.66 1.52 19.20425
04TC2-I-YaYu PVC 48006TC2-I-XFYu XLPE
14 6 0.66 1.52 22.70603
06TC2-I-YaYu PVC 68008TC2-I-XFYu XLPE
14 8 0.66 1.78 25.90806
08TC2-I-YaYu PVC 91010TC2-I-XFYu XLPE
14 10 0.66 1.78 29.25987
10TC2-I-YaYu PVC 112012TC2-I-XFYu XLPE
14 12 0.66 1.78 30.151148
12TC2-I-YaYu PVC 129016TC2-I-XFYu XLPE
14 16 0.66 2.03 33.901520
16TC2-I-YaYu PVC 171024TC2-I-XFYu XLPE
14 24 0.66 2.03 41.702208
24TC2-I-YaYu PVC 248036TC2-I-XFYu XLPE
14 36 0.66 2.29 48.203242
36TC2-I-YaYu PVC 364002TC2-G-XFYu XLPE 12 2 0.66 1.52 18.50 34002TC2-G-YaYu PVC 38504TC2-G-XFYu XLPE
12 4 0.66 1.52 21.35588
04TC2-G-YaYu PVC 66006TC2-G-XFYu XLPE
12 6 0.66 1.78 25.88874
06TC2-G-YaYu PVC 98008TC2-G-XFYu XLPE
12 8 0.66 1.78 28.961128
08TC2-G-YaYu PVC 125010TC2-G-XFYu XLPE
12 10 0.66 1.78 32.751387
10TC2-G-YaYu PVC 153512TC2-G-XFYu XLPE
12 12 0.66 2.03 34.351662
12TC2-G-YaYu PVC 183016TC2-G-XFYu XLPE
12 16 0.66 2.03 38.102152
16TC2-G-YaYu PVC 237024TC2-G-XFYu XLPE
12 24 0.66 2.29 47.503203
24TC2-G-YaYu PVC 353036TC2-G-XFYu XLPE
12 36 0.66 2.55 54.904706
36TC2-G-YaYu PVC 5190
MULTI TRIAD XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
![Page 10: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/10.jpg)
Page 09 Industrial Cables
1. Conductor: Stranded Plain/Tinned Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
6. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Black).
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-J-XFOSYu XLPE18 2 0.66 1.27 12.80
11702PC2-J-YaOSYu PVC 13504PC2-J-XFOSYu XLPE
18 4 0.66 1.27 14.52177
04PC2-J-YaOSYu PVC 20506PC2-J-XFOSYu XLPE
18 6 0.66 1.27 16.90241
06PC2-J-YaOSYu PVC 28508PC2-J-XFOSYu XLPE
18 8 0.66 1.52 19.27323
08PC2-J-YaOSYu PVC 37510PC2-J-XFOSYu XLPE
18 10 0.66 1.52 21.52389
10PC2-J-YaOSYu PVC 45512PC2-J-XFOSYu XLPE
18 12 0.66 1.52 22.18443
12PC2-J-YaOSYu PVC 52016PC2-J-XFOSYu XLPE
18 16 0.66 1.78 24.94586
16PC2-J-YaOSYu PVC 68524PC2-J-XFOSYu XLPE
18 24 0.66 1.78 30.27829
24PC2-J-YaOSYu PVC 97036PC2-J-XFOSYu XLPE
18 36 0.66 2.03 34.891198
36PC2-J-YaOSYu PVC 140502PC2-H-XFOSYu XLPE
16 2 0.66 1.27 13.78144
02PC2-H-YaOSYu PVC 17004PC2-H-XFOSYu XLPE
16 4 0.66 1.27 15.71226
04PC2-H-YaOSYu PVC 26006PC2-H-XFOSYu XLPE
16 6 0.66 1.52 18.90333
06PC2-H-YaOSYu PVC 38508PC2-H-XFOSYu XLPE
16 8 0.66 1.52 20.96418
08PC2-H-YaOSYu PVC 48510PC2-H-XFOSYu XLPE
16 10 0.66 1.52 23.49507
10PC2-H-YaOSYu PVC 58512PC2-H-XFOSYu XLPE
16 12 0.66 1.78 24.74610
12PC2-H-YaOSYu PVC 67016PC2-H-XFOSYu XLPE
16 16 0.66 1.78 27.25771
16PC2-H-YaOSYu PVC 88524PC2-H-XFOSYu XLPE
16 24 0.66 1.78 33.221102
24PC2-H-YaOSYu PVC 126536PC2-H-XFOSYu XLPE
16 36 0.66 2.03 38.331603
36PC2-H-YaOSYu PVC 1840
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
12346 5
MULTI PAIR/TRIAD, XLPE/PVC, UNSHIELDED WITH OVERALL SHIELD, UNARMOURED INSTRUMENTATION CABLE
UL 13 / UL 2250, PLTC / ITC, 90°C / 300V SUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 11: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/11.jpg)
Page 10Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-I-XFOSYu XLPE14 2 0.66 1.27 15.03
18402PC2-I-YaOSYu PVC 21204PC2-I-XFOSYu XLPE
14 4 0.66 1.27 17.22300
04PC2-I-YaOSYu PVC 34506PC2-I-XFOSYu XLPE
14 6 0.66 1.52 20.77444
06PC2-I-YaOSYu PVC 50508PC2-I-XFOSYu XLPE
14 8 0.66 1.52 23.11564
08PC2-I-YaOSYu PVC 63510PC2-I-XFOSYu XLPE
14 10 0.66 1.78 26.53719
10PC2-I-YaOSYu PVC 81012PC2-I-XFOSYu XLPE
14 12 0.66 1.78 27.37828
12PC2-I-YaOSYu PVC 93516PC2-I-XFOSYu XLPE
14 16 0.66 1.78 30.181057
16PC2-I-YaOSYu PVC 119024PC2-I-XFOSYu XLPE
14 24 0.66 2.03 37.481568
24PC2-I-YaOSYu PVC 176536PC2-I-XFOSYu XLPE
14 36 0.66 2.03 42.702232
36PC2-I-YaOSYu PVC 251002PC2-G-XFOSYu XLPE
12 2 0.66 1.27 16.57243
02PC2-G-YaOSYu PVC 27504PC2-G-XFOSYu XLPE
12 4 0.66 1.52 19.61432
04PC2-G-YaOSYu PVC 48006PC2-G-XFOSYu XLPE
12 6 0.66 1.52 23.08610
06PC2-G-YaOSYu PVC 67508PC2-G-XFOSYu XLPE
12 8 0.66 1.78 26.32812
08PC2-G-YaOSYu PVC 90010PC2-G-XFOSYu XLPE
12 10 0.66 1.78 29.61993
10PC2-G-YaOSYu PVC 110012PC2-G-XFOSYu XLPE
12 12 0.66 1.78 30.571152
12PC2-G-YaOSYu PVC 127516PC2-G-XFOSYu XLPE
12 16 0.66 2.03 34.321522
16PC2-G-YaOSYu PVC 168524PC2-G-XFOSYu XLPE
12 24 0.66 2.03 42.112205
24PC2-G-YaOSYu PVC 243536PC2-G-XFOSYu XLPE
12 36 0.66 2.29 48.643231
36PC2-G-YaOSYu PVC 3565
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-J-XFOSYu XLPE18 2 0.66 1.27 14.00
14902TC2-J-YaOSYu PVC 17504TC2-J-XFOSYu XLPE
18 4 0.66 1.27 15.97235
04TC2-J-YaOSYu PVC 27506TC2-J-XFOSYu XLPE
18 6 0.66 1.52 19.21347
06TC2-J-YaOSYu PVC 40508TC2-J-XFOSYu XLPE
18 8 0.66 1.52 21.33436
08TC2-J-YaOSYu PVC 51010TC2-J-XFOSYu XLPE
18 10 0.66 1.78 23.91529
10TC2-J-YaOSYu PVC 62012TC2-J-XFOSYu XLPE
18 12 0.66 1.78 25.21637
12TC2-J-YaOSYu PVC 74516TC2-J-XFOSYu XLPE
18 16 0.66 1.78 27.75806
16TC2-J-YaOSYu PVC 94524TC2-J-XFOSYu XLPE
18 24 0.66 2.03 34.381193
24TC2-J-YaOSYu PVC 139536TC2-J-XFOSYu XLPE
18 36 0.66 2.03 39.081680
36TC2-J-YaOSYu PVC 197002TC2-H-XFOSYu XLPE
16 2 0.66 1.27 15.13187
02TC2-H-YaOSYu PVC 21504TC2-H-XFOSYu XLPE
16 4 0.66 1.52 17.86325
04TC2-H-YaOSYu PVC 35006TC2-H-XFOSYu XLPE
16 6 0.66 1.52 20.91452
06TC2-H-YaOSYu PVC 52008TC2-H-XFOSYu XLPE
16 8 0.66 1.78 23.28574
08TC2-H-YaOSYu PVC 66010TC2-H-XFOSYu XLPE
16 10 0.66 1.78 26.72731
10TC2-H-YaOSYu PVC 84012TC2-H-XFOSYu XLPE
16 12 0.66 1.78 27.57843
12TC2-H-YaOSYu PVC 97016TC2-H-XFOSYu XLPE
16 16 0.66 2.03 30.411077
16TC2-H-YaOSYu PVC 123524TC2-H-XFOSYu XLPE
16 24 0.66 2.03 37.771597
24TC2-H-YaOSYu PVC 183036TC2-H-XFOSYu XLPE
16 36 0.66 2.29 43.582327
36TC2-H-YaOSYu PVC 2610
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
MULTI TRIAD XLPE/PVC UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
![Page 12: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/12.jpg)
Page 11 Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-I-XFOSYu XLPE14 2 0.66 1.27 16.55
24502TC2-I-YaOSYu PVC 28004TC2-I-XFOSYu XLPE
14 4 0.66 1.52 19.58435
04TC2-I-YaOSYu PVC 49006TC2-I-XFOSYu XLPE
14 6 0.66 1.52 23.05615
06TC2-I-YaOSYu PVC 69508TC2-I-XFOSYu XLPE
14 8 0.66 1.78 26.30819
08TC2-I-YaOSYu PVC 92510TC2-I-XFOSYu XLPE
14 10 0.66 1.78 29.581001
10TC2-I-YaOSYu PVC 112512TC2-I-XFOSYu XLPE
14 12 0.66 1.78 30.531162
12TC2-I-YaOSYu PVC 128516TC2-I-XFOSYu XLPE
14 16 0.66 2.03 34.281535
16TC2-I-YaOSYu PVC 172524TC2-I-XFOSYu XLPE
14 24 0.66 2.03 42.102225
24TC2-I-YaOSYu PVC 250036TC2-I-XFOSYu XLPE
14 36 0.66 2.29 48.583261
36TC2-I-YaOSYu PVC 366002TC2-G-XFOSYu XLPE
12 2 0.66 1.52 18.83351
02TC2-G-YaOSYu PVC 39504TC2-G-XFOSYu XLPE
12 4 0.66 1.52 21.71600
04TC2-G-YaOSYu PVC 66506TC2-G-XFOSYu XLPE
12 6 0.66 1.78 26.24887
06TC2-G-YaOSYu PVC 98508TC2-G-XFOSYu XLPE
12 8 0.66 1.78 29.321141
08TC2-G-YaOSYu PVC 126510TC2-G-XFOSYu XLPE
12 10 0.66 1.78 33.101401
10TC2-G-YaOSYu PVC 155012TC2-G-XFOSYu XLPE
12 12 0.66 2.03 34.711677
12TC2-G-YaOSYu PVC 185516TC2-G-XFOSYu XLPE
12 16 0.66 2.03 38.412168
16TC2-G-YaOSYu PVC 239524TC2-G-XFOSYu XLPE
12 24 0.66 2.29 47.873222
24TC2-G-YaOSYu PVC 355536TC2-G-XFOSYu XLPE
12 36 0.66 2.55 55.284727
36TC2-G-YaOSYu PVC 5215
MULTI TRIAD XLPE/PVC UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
![Page 13: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/13.jpg)
Page 12Industrial Cables
1. Conductor: Stranded Plain/Tinned Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Individual Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Black).
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-J-XFISYu XLPE18 2 0.66 1.27 13.39
13602PC2-J-YaISYu PVC 15504PC2-J-XFISYu XLPE
18 4 0.66 1.27 15.23212
04PC2-J-YaISYu PVC 24006PC2-J-XFISYu XLPE
18 6 0.66 1.52 18.30312
06PC2-J-YaISYu PVC 35508PC2-J-XFISYu XLPE
18 8 0.66 1.52 20.28391
08PC2-J-YaISYu PVC 44510PC2-J-XFISYu XLPE
18 10 0.66 1.52 22.70473
10PC2-J-YaISYu PVC 53512PC2-J-XFISYu XLPE
18 12 0.66 1.52 23.40543
12PC2-J-YaISYu PVC 61516PC2-J-XFISYu XLPE
18 16 0.66 1.78 26.32719
16PC2-J-YaISYu PVC 82024PC2-J-XFISYu XLPE
18 24 0.66 1.78 32.031026
24PC2-J-YaISYu PVC 117036PC2-J-XFISYu XLPE
18 36 0.66 2.03 36.951491
36PC2-J-YaISYu PVC 169502PC2-H-XFISYu XLPE
16 2 0.66 1.27 14.40163
02PC2-H-YaISYu PVC 19004PC2-H-XFISYu XLPE
16 4 0.66 1.27 16.45261
04PC2-H-YaISYu PVC 31006PC2-H-XFISYu XLPE
16 6 0.66 1.52 19.81385
06PC2-H-YaISYu PVC 45508PC2-H-XFISYu XLPE
16 8 0.66 1.52 22.02486
08PC2-H-YaISYu PVC 57510PC2-H-XFISYu XLPE
16 10 0.66 1.78 25.26621
10PC2-H-YaISYu PVC 73512PC2-H-XFISYu XLPE
16 12 0.66 1.78 26.05712
12PC2-H-YaISYu PVC 84616PC2-H-XFISYu XLPE
16 16 0.66 1.78 28.69905
16PC2-H-YaISYu PVC 107524PC2-H-XFISYu XLPE
16 24 0.66 2.03 35.581340
24PC2-H-YaISYu PVC 159036PC2-H-XFISYu XLPE
16 36 0.66 2.03 40.481896
36PC2-H-YaISYu PVC 2255
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
MULTI PAIR XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
12356 47
MULTI PAIR/TRIAD, XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD, UNARMOURED INSTRUMENTATION CABLE
UL 13 / UL 2250, PLTC / ITC, 90°C / 300V SUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 14: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/14.jpg)
Page 13 Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-I-XFISYu XLPE14 2 0.66 1.27 15.67
20502PC2-I-YaISYu PVC 23504PC2-I-XFISYu XLPE
14 4 0.66 1.52 18.52358
04PC2-I-YaISYu PVC 41506PC2-I-XFISYu XLPE
14 6 0.66 1.52 21.73501
06PC2-I-YaISYu PVC 58008PC2-I-XFISYu XLPE
14 8 0.66 1.78 24.77667
08PC2-I-YaISYu PVC 74010PC2-I-XFISYu XLPE
14 10 0.66 1.78 27.82812
10PC2-I-YaISYu PVC 94012PC2-I-XFISYu XLPE
14 12 0.66 1.78 28.70938
12PC2-I-YaISYu PVC 108516PC2-I-XFISYu XLPE
14 16 0.66 1.78 31.691201
16PC2-I-YaISYu PVC 139024PC2-I-XFISYu XLPE
14 24 0.66 2.03 39.411783
24PC2-I-YaISYu PVC 206036PC2-I-XFISYu XLPE
14 36 0.66 2.29 45.502603
36PC2-I-YaISYu PVC 301002PC2-G-XFISYu XLPE
12 2 0.66 1.52 17.77283
02PC2-G-YaISYu PVC 30004PC2-G-XFISYu XLPE
12 4 0.66 1.52 20.43471
04PC2-G-YaISYu PVC 53506PC2-G-XFISYu XLPE
12 6 0.66 1.52 24.10667
06PC2-G-YaISYu PVC 75508PC2-G-XFISYu XLPE
12 8 0.66 1.78 27.49888
08PC2-G-YaISYu PVC 100510PC2-G-XFISYu XLPE
12 10 0.66 1.78 30.971086
10PC2-G-YaISYu PVC 123012PC2-G-XFISYu XLPE
12 12 0.66 1.78 31.991263
12PC2-G-YaISYu PVC 142516PC2-G-XFISYu XLPE
12 16 0.66 2.03 35.921669
16PC2-G-YaISYu PVC 188524PC2-G-XFISYu XLPE 12 24 0.66 2.29 44.70 247524PC2-G-YaISYu PVC 279536PC2-G-XFISYu XLPE
12 36 0.66 2.29 51.023552
36PC2-G-YaISYu PVC 4010
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-J-XFISYu XLPE18 2 0.66 1.27 15.19
17202TC2-J-YaISYu PVC 19504TC2-J-XFISYu XLPE
18 4 0.66 1.52 17.93244
04TC2-J-YaISYu PVC 33506TC2-J-XFISYu XLPE
18 6 0.66 1.52 21.00406
06TC2-J-YaISYu PVC 46508TC2-J-XFISYu XLPE
18 8 0.66 1.52 23.38512
08TC2-J-YaISYu PVC 58510TC2-J-XFISYu XLPE
18 10 0.66 1.78 26.84654
10TC2-J-YaISYu PVC 75012TC2-J-XFISYu XLPE
18 12 0.66 1.78 27.69750
12TC2-J-YaISYu PVC 86016TC2-J-XFISYu XLPE
18 16 0.66 1.78 30.55952
16TC2-J-YaISYu PVC 109024TC2-J-XFISYu XLPE
18 24 0.66 2.03 37.951410
24TC2-J-YaISYu PVC 161536TC2-J-XFISYu XLPE
18 36 0.66 2.29 43.792046
36TC2-J-YaISYu PVC 2345
MULTI PAIR XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
MULTI TRIAD XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
![Page 15: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/15.jpg)
Page 14Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-H-XFISYu XLPE16 2 0.66 1.27 16.41
21202TC2-H-YaISYu PVC 24504TC2-H-XFISYu XLPE
16 4 0.66 1.52 19.41369
04TC2-H-YaISYu PVC 43006TC2-H-XFISYu XLPE
16 6 0.66 1.52 22.83516
06TC2-H-YaISYu PVC 60008TC2-H-XFISYu XLPE
16 8 0.66 1.78 26.04687
08TC2-H-YaISYu PVC 80010TC2-H-XFISYu XLPE
16 10 0.66 1.78 29.29836
10TC2-H-YaISYu PVC 97512TC2-H-XFISYu XLPE
16 12 0.66 1.78 30.23965
12TC2-H-YaISYu PVC 112516TC2-H-XFISYu XLPE
16 16 0.66 1.78 33.421234
16TC2-H-YaISYu PVC 144024TC2-H-XFISYu XLPE
16 24 0.66 2.03 41.611832
24TC2-H-YaISYu PVC 213536TC2-H-XFISYu XLPE
16 36 0.66 2.29 48.072672
36TC2-H-YaISYu PVC 311502TC2-I-XFISYu XLPE
14 2 0.66 1.52 18.47290
02TC2-I-YaISYu PVC 33504TC2-I-XFISYu XLPE
14 4 0.66 1.52 21.27481
04TC2-I-YaISYu PVC 55006TC2-I-XFISYu XLPE
14 6 0.66 1.78 25.69709
06TC2-I-YaISYu PVC 81508TC2-I-XFISYu XLPE
14 8 0.66 1.78 28.70905
08TC2-I-YaISYu PVC 104010TC2-I-XFISYu XLPE
14 10 0.66 1.78 32.371107
10TC2-I-YaISYu PVC 127012TC2-I-XFISYu XLPE
14 12 0.66 1.78 33.441286
12TC2-I-YaISYu PVC 147516TC2-I-XFISYu XLPE
14 16 0.66 2.03 37.561699
16TC2-I-YaISYu PVC 195024TC2-I-XFISYu XLPE
14 24 0.66 2.29 46.792519
24TC2-I-YaISYu PVC 289036TC2-I-XFISYu XLPE
14 36 0.66 2.55 54.013675
36TC2-I-YaISYu PVC 421502TC2-G-XFISYu XLPE
12 2 0.66 1.52 20.37380
02TC2-G-YaISYu PVC 43004TC2-G-XFISYu XLPE
12 4 0.66 1.52 23.57649
04TC2-G-YaISYu PVC 73006TC2-G-XFISYu XLPE
12 6 0.66 1.78 28.54960
06TC2-G-YaISYu PVC 108008TC2-G-XFISYu XLPE
12 8 0.66 1.78 31.971235
08TC2-G-YaISYu PVC 138510TC2-G-XFISYu XLPE
12 10 0.65 2.03 36.691558
10TC2-G-YaISYu PVC 175012TC2-G-XFISYu XLPE
12 12 0.65 2.03 37.911815
12TC2-G-YaISYu PVC 203516TC2-G-XFISYu XLPE
12 16 0.66 2.03 42.022345
16TC2-G-YaISYu PVC 263024TC2-G-XFISYu XLPE 12 24 0.66 2.55 53.04 354924TC2-G-YaISYu PVC 390536TC2-G-XFISYu XLPE
12 36 0.66 2.55 60.665111
36TC2-G-YaISYu PVC 5725
MULTI TRIAD XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
![Page 16: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/16.jpg)
Page 15 Industrial Cables
1. Conductor: Stranded Plain/Tinned Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
5. Armour: Galvanised Round Steel Wires.
6. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Black).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
SINGLE PAIR XLPE/PVC UNSHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SINGLE TRIAD XLPE/PVC UNSHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Dimensions of Galvanised Double Steel Tape Armour are available upon request. 4.) Other jacket materials are available upon request. 5.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01PC2-J-XFSWYu XLPE18 0.66 0.90 0.90 1.02 12.40
22401PC2-J-YaSWYu PVC 23501PC2-H-XFSWYu XLPE
16 0.66 1.02 0.90 1.02 13.25262
01PC2-H-YaSWYu PVC 27501PC2-I-XFSWYu XLPE
14 0.66 1.02 0.90 1.02 14.00297
01PC2-I-YaSWYu PVC 31001PC2-G-XFSWYu XLPE
12 0.66 1.02 0.90 1.27 15.50368
01PC2-G-YaSWYu PVC 390
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01TC2-J-XFSWYu XLPE18 0.66 1.02 0.90 1.02 13.10
25701TC2-J-YaSWYu PVC 27001TC2-H-XFSWYu XLPE
16 0.66 1.02 0.90 1.02 13.70289
01TC2-H-YaSWYu PVC 30501TC2-I-XFSWYu XLPE
14 0.66 1.02 0.90 1.02 15.10354
01TC2-I-YaSWYu PVC 37501TC2-G-XFSWYu XLPE
12 0.66 1.02 0.90 1.27 16.60451
01TC2-G-YaSWYu PVC 470
12346 5
SINGLE PAIR/TRIAD, XLPE/PVC, UNSHIELDED, STEEL WIRE ARMOURED, INSTRUMENTATION CABLE
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 17: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/17.jpg)
Page 16Industrial Cables
1. Conductor: Stranded Plain/Tinned Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Screening/Shielding : Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
6. Armour: Galvanised Round Steel Wires.7. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Black).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
SINGLE PAIR XLPE/PVC SHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SINGLE TRIAD XLPE/PVC SHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01PC2-J-XFOSSWYu XLPE18 0.66 1.02 0.90 1.02 13.00
25001PC2-J-YaOSSWYu PVC 26501PC2-H-XFOSSWYu XLPE
16 0.66 1.02 0.90 1.02 13.60277
01PC2-H-YaOSSWYu PVC 29001PC2-I-XFOSSWYu XLPE
14 0.66 1.02 0.90 1.02 14.40317
01PC2-I-YaOSSWYu PVC 33501PC2-G-XFOSSWYu XLPE
12 0.66 1.27 0.90 1.27 16.35412
01PC2-G-YaOSSWYu PVC 433
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01TC2-J-XFOSSWYu XLPE18 0.66 1.02 0.90 1.02 13.40
27201TC2-J-YaOSSWYu PVC 28501TC2-H-XFOSSWYu XLPE
16 0.66 1.02 0.90 1.02 14.10309
01TC2-H-YaOSSWYu PVC 32001TC2-I-XFOSSWYu XLPE
14 0.66 1.02 0.90 1.27 15.40370
01TC2-I-YaOSSWYu PVC 39501TC2-G-XFOSSWYu XLPE
12 0.66 1.27 0.90 1.27 16.90468
01TC2-G-YaOSSWYu PVC 495
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Dimensions of Galvanised Double Steel Tape Armour are available upon request. 4.) Other jacket materials are available upon request. 5.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
12367 5 4
SINGLE PAIR/TRIAD, XLPE/PVC, SHIELDED, STEEL WIRE ARMOURED INSTRUMENTATION CABLE
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 18: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/18.jpg)
Page 17 Industrial Cables
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
MULTI PAIR XLPE/PVC UNSHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-J-XSWFYu XLPE18 2 0.66 1.27 0.90 1.27 16.90
39602PC2-J-YaSWYu PVC 41504PC2-J-XFSWYu XLPE
18 4 0.66 1.27 0.90 1.27 18.60497
04PC2-J-YaSWYu PVC 52506PC2-J-XFSWYu XLPE
18 6 0.66 1.27 1.25 1.27 21.70719
06PC2-J-YaSWYu PVC 76508PC2-J-XFSWYu XLPE
18 8 0.66 1.52 1.60 1.27 24.801003
08PC2-J-YaSWYu PVC 104010PC2-J-XFSWYu XLPE
18 10 0.66 1.52 1.60 1.27 27.001149
10PC2-J-YaSWYu PVC 121512PC2-J-XFSWYu XLPE
18 12 0.66 1.52 1.60 1.27 27.701223
12PC2-J-YaSWYu PVC 129016PC2-J-XFSWYu XLPE
18 16 0.66 1.78 2.0 1.27 31.251666
16PC2-J-YaSWYu PVC 175524PC2-J-XFSWYu XLPE
18 24 0.66 1.78 2.0 1.27 36.602144
24PC2-J-YaSWYu PVC 227536PC2-J-XFSWYu XLPE
18 36 0.66 2.03 2.50 1.27 42.202740
36PC2-J-YaSWYu PVC 2900
1. Conductor: Stranded Plain/Tinned Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers if required) and wrapped with a polyester wrapping tape.
5. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
6. Armour: Galvanised Round Steel Wires.7. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Black).
12347 6 5
MULTI PAIR/TRIAD, XLPE/PVC, UNSHIELDED, STEEL WIRE ARMOURED INSTRUMENTATION CABLE
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 19: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/19.jpg)
Page 18Industrial Cables
MULTI PAIR XLPE/PVC UNSHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-H-XFSWYu XLPE16 2 0.66 1.27 0.90 1.27 17.90
44402PC2-H-YaSWYu PVC 47004PC2-H-XFSWYu XLPE
16 4 0.66 1.27 1.25 1.27 20.50666
04PC2-H-YaSWYu PVC 70006PC2-H-XFSWYu XLPE
16 6 0.66 1.52 1.25 1.27 23.70875
06PC2-H-YaSWYu PVC 92008PC2-H-XFSWYu XLPE
16 8 0.66 1.52 1.60 1.27 26.501158
08PC2-H-YaSWYu PVC 122010PC2-H-XFSWYu XLPE
16 10 0.66 1.52 1.60 1.27 29.001362
10PC2-H-YaSWYu PVC 142012PC2-H-XFSWYu XLPE
16 12 0.66 1.78 2.0 1.27 31.101450
12PC2-H-YaSWYu PVC 152016PC2-H-XFSWYu XLPE
16 16 0.66 1.78 2.0 1.27 33.601942
16PC2-H-YaSWYu PVC 205024PC2-H-XFSWYu XLPE
16 24 0.66 1.78 2.50 1.52 40.502555
24PC2-H-YaSWYu PVC 261036PC2-H-XFSWYu XLPE
16 36 0.66 2.03 2.50 1.52 46.173355
36PC2-H-YaSWYu PVC 356002PC2-I-XFSWYu XLPE
14 2 0.66 1.27 1.25 1.27 19.83611
02PC2-I-YaSWYu PVC 63004PC2-I-XFSWYu XLPE
14 4 0.66 1.27 1.25 1.27 22.0790
04PC2-I-YaSWYu PVC 83006PC2-I-XFSWYu XLPE
14 6 0.66 1.52 1.60 1.27 26.301183
06PC2-I-YaSWYu PVC 122508PC2-I-XFSWYu XLPE
14 8 0.66 1.52 1.60 1.27 28.621383
08PC2-I-YaSWYu PVC 145510PC2-I-XFSWYu XLPE
14 10 0.66 1.52 2.0 1.27 32.841859
10PC2-I-YaSWYu PVC 194512PC2-I-XFSWYu XLPE
14 12 0.66 1.78 2.0 1.27 33.702024
12PC2-I-YaSWYu PVC 210016PC2-I-XFSWYu XLPE
14 16 0.66 1.78 2.0 1.27 36.502372
16PC2-I-YaSWYu PVC 250024PC2-I-XFSWYu XLPE
14 24 0.66 1.78 2.5 1.52 45.303455
24PC2-I-YaSWYu PVC 361136PC2-I-XFSWYu XLPE
14 36 0.66 2.03 2.5 1.52 50.504410
36PC2-I-YaSWYu PVC 459002PC2-G-XFSWYu XLPE
12 2 0.66 1.27 1.25 1.27 21.35710
02PC2-G-YaSWYu PVC 74504PC2-G-XFSWYu XLPE
12 4 0.66 1.52 1.60 1.27 25.121115
04PC2-G-YaSWYu PVC 117006PC2-G-XFSWYu XLPE
12 6 0.66 1.52 1.60 1.27 28.601428
06PC2-G-YaSWYu PVC 151008PC2-G-XFSWYu XLPE
12 8 0.66 1.78 2.0 1.27 32.631951
08PC2-G-YaSWYu PVC 204010PC2-G-XFSWYu XLPE
12 10 0.66 1.78 2.0 1.27 35.922279
10PC2-G-YaSWYu PVC 238512PC2-G-XFSWYu XLPE
12 12 0.66 1.78 2.0 1.27 36.902495
12PC2-G-YaSWYu PVC 259016PC2-G-XFSWYu XLPE
12 16 0.66 2.03 2.50 1.27 41.633040
16PC2-G-YaSWYu PVC 318024PC2-G-XFSWYu XLPE
12 24 0.66 2.03 2.50 1.52 49.954145
24PC2-G-YaSWYu PVC 431536PC2-G-XFSWYu XLPE
12 36 0.66 2.29 2.50 1.52 56.475505
36PC2-G-YaSWYu PVC 5710
![Page 20: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/20.jpg)
Page 19 Industrial Cables
MULTI TRIAD XLPE/PVC UNSHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-J-XSWFYu XLPE18 2 0.66 1.27 0.90 1.27 18.10
45602TC2-J-YaSWYu PVC 48504TC2-J-XFSWYu XLPE
18 4 0.66 1.27 1.25 1.27 20.77687
04TC2-J-YaSWYu PVC 73006TC2-J-XFSWYu XLPE
18 6 0.66 1.52 1.60 1.27 24.721027
06TC2-J-YaSWYu PVC 107008TC2-J-XFSWYu XLPE
18 8 0.66 1.52 1.60 1.27 26.841195
08TC2-J-YaSWYu PVC 125010TC2-J-XFSWYu XLPE
18 10 0.66 1.52 1.60 1.27 29.421384
10TC2-J-YaSWYu PVC 147512TC2-J-XFSWYu XLPE
18 12 0.66 1.78 2.0 1.27 31.521719
12TC2-J-YaSWYu PVC 182516TC2-J-XFSWYu XLPE
18 16 0.66 1.78 2.0 1.27 34.062005
16TC2-J-YaSWYu PVC 214024TC2-J-XFSWYu XLPE
18 24 0.66 2.03 2.50 1.27 41.703005
24TC2-J-YaSWYu PVC 288036TC2-J-XFSWYu XLPE
18 36 0.66 2.03 2.50 1.52 46.953814
36TC2-J-YaSWYu PVC 375002TC2-H-XFSWYu XLPE
16 2 0.66 1.27 1.25 1.27 19.93614
02TC2-H-YaSWYu PVC 66004TC2-H-XFSWYu XLPE
16 4 0.66 1.52 1.25 1.27 22.67841
04TC2-H-YaSWYu PVC 89606TC2-H-XFSWYu XLPE
16 6 0.66 1.52 1.60 1.27 26.421192
06TC2-H-YaSWYu PVC 128008TC2-H-XFSWYu XLPE
16 8 0.66 1.52 1.60 1.27 28.801410
08TC2-H-YaSWYu PVC 149010TC2-H-XFSWYu XLPE
16 10 0.66 1.78 2.0 1.27 33.031899
10TC2-H-YaSWYu PVC 198012TC2-H-XFSWYu XLPE
16 12 0.66 1.78 2.0 1.27 33.882041
12TC2-H-YaSWYu PVC 216016TC2-H-XFSWYu XLPE
16 16 0.66 1.78 2.0 1.27 36.722410
16TC2-H-YaSWYu PVC 254524TC2-H-XFSWYu XLPE
16 24 0.66 2.03 2.50 1.52 45.613345
24TC2-H-YaSWYu PVC 355036TC2-H-XFSWYu XLPE
16 36 0.66 2.29 2.50 1.52 51.414255
36TC2-H-YaSWYu PVC 456502TC2-I-XFSWYu XLPE
14 2 0.66 1.27 1.25 1.27 21.35711
02TC2-I-YaSWYu PVC 74504TC2-I-XFSWYu XLPE
14 4 0.66 1.52 1.60 1.27 25.101118
04TC2-I-YaSWYu PVC 117506TC2-I-XFSWYu XLPE
14 6 0.66 1.52 1.60 1.27 28.561450
06TC2-I-YaSWYu PVC 151008TC2-I-XFSWYu XLPE
14 8 0.66 1.78 2.0 1.27 32.601975
08TC2-I-YaSWYu PVC 205510TC2-I-XFSWYu XLPE
14 10 0.66 1.78 2.0 1.27 35.892305
10TC2-I-YaSWYu PVC 241012TC2-I-XFSWYu XLPE
14 12 0.66 1.78 2.0 1.27 36.842495
12TC2-I-YaSWYu PVC 262016TC2-I-XFSWYu XLPE
14 16 0.66 2.03 2.50 1.27 41.593050
16TC2-I-YaSWYu PVC 321524TC2-I-XFSWYu XLPE
14 24 0.66 2.03 2.50 1.52 49.904155
24TC2-I-YaSWYu PVC 440536TC2-I-XFSWYu XLPE
14 36 0.66 2.29 2.50 1.52 56.415948
36TC2-I-YaSWYu PVC 586502TC2-G-XFSWYu XLPE
12 2 0.66 1.52 1.25 1.27 23.64892
02TC2-G-YaSWYu PVC 93504TC2-G-XFSWYu XLPE
12 4 0.66 1.52 1.60 1.27 27.221361
04TC2-G-YaSWYu PVC 142506TC2-G-XFSWYu XLPE
12 6 0.66 1.78 2.0 1.27 32.552025
06TC2-G-YaSWYu PVC 211508TC2-G-XFSWYu XLPE
12 8 0.66 1.78 2.0 1.27 35.632426
08TC2-G-YaSWYu PVC 251510TC2-G-XFSWYu XLPE
12 10 0.66 1.78 2.50 1.27 40.402855
10TC2-G-YaSWYu PVC 297512TC2-G-XFSWYu XLPE
12 12 0.66 2.03 2.50 1.27 42.023225
12TC2-G-YaSWYu PVC 337016TC2-G-XFSWYu XLPE
12 16 0.66 2.03 2.50 1.52 46.253950
16TC2-G-YaSWYu PVC 414024TC2-G-XFSWYu XLPE
12 24 0.66 2.29 2.50 1.52 55.705440
24TC2-G-YaSWYu PVC 573036TC2-G-XFSWYu XLPE
12 36 0.66 2.55 2.50 1.90 63.907440
36C2-G-YaSWYu PVC 7875
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Dimensions of Galvanised Double Steel Tape Armour are available upon request. 4.) Other jacket materials are available upon request. 5.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
![Page 21: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/21.jpg)
Page 20Industrial Cables
1. Conductor: Stranded Plain/Tinned Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
6. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
7. Armour: Galvanised Round Steel Wires.8. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Black).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-J-XFOSSWYu XLPE18 2 0.66 1.27 0.9 1.27 17.26
41202PC2-J-YaOSSWYu PVC 44004PC2-J-XFOSSWYu XLPE
18 4 0.66 1.27 1.25 1.27 19.68601
04PC2-J-YaOSSWYu PVC 64006PC2-J-XFOSSWYu XLPE
18 6 0.66 1.52 1.25 1.27 22.59755
06PC2-J-YaOSSWYu PVC 78508PC2-J-XFOSSWYu XLPE
18 8 0.66 1.52 1.60 1.27 25.141017
08PC2-J-YaOSSWYu PVC 107510PC2-J-XFOSSWYu XLPE
18 10 0.66 1.52 1.60 1.27 27.391179
10PC2-J-YaOSSWYu PVC 125512PC2-J-XFOSSWYu XLPE
18 12 0.66 1.52 1.60 1.27 28.051252
12PC2-J-YaOSSWYu PVC 133016PC2-J-XFOSSWYu XLPE
18 16 0.66 1.78 2.0 1.27 31.611681
16PC2-J-YaOSSWYu PVC 178024PC2-J-XFOSSWYu XLPE
18 24 0.66 1.78 2.0 1.27 36.942180
24PC2-J-YaOSSWYu PVC 230036PC2-J-XFOSSWYu XLPE
18 36 0.66 2.03 2.50 1.52 43.093122
36PC2-J-YaOSSWYu PVC 332502PC2-H-XFOSSWYu XLPE
16 2 0.66 1.27 0.90 1.27 18.24460
02PC2-H-YaOSSWYu PVC 48504PC2-H-XFOSSWYu XLPE
16 4 0.66 1.27 1.25 1.27 20.87688
04PC2-H-YaOSSWYu PVC 72506PC2-H-XFOSSWYu XLPE
16 6 0.66 1.52 1.60 1.27 24.771024
06PC2-H-YaOSSWYu PVC 106008PC2-H-XFOSSWYu XLPE
16 8 0.66 1.52 1.60 1.27 26.831187
08PC2-H-YaOSSWYu PVC 123510PC2-H-XFOSSWYu XLPE
16 10 0.66 1.52 1.60 1.27 29.361373
10PC2-H-YaOSSWYu PVC 143512PC2-H-XFOSSWYu XLPE
16 12 0.66 1.78 2.0 1.27 31.441704
12PC2-H-YaOSSWYu PVC 179516PC2-H-XFOSSWYu XLPE
16 16 0.66 1.78 2.0 1.27 33.921982
16PC2-H-YaOSSWYu PVC 209524PC2-H-XFOSSWYu XLPE
16 24 0.66 2.03 2.50 1.27 41.412900
24PC2-H-YaOSSWYu PVC 304036PC2-H-XFOSSWYu XLPE
16 36 0.66 2.03 2.50 1.52 46.533749
36PC2-H-YaOSSWYu PVC 3945
12368 5 47
MULTI PAIR/TRIAD, XLPE/PVC, UNSHIELDED WITH OVERALL SHIELD, STEEL WIRE ARMOURED INSTRUMENTATION CABLE
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 22: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/22.jpg)
Page 21 Industrial Cables
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
MULTI TRIAD XLPE/PVC UNSHIELDED WITH OVERALL SHIELD– WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-I-XFOSSWYu XLPE14 2 0.66 1.27 1.25 1.27 20.19
62302PC2-I-YaOSSWYu PVC 65504PC2-I-XFOSSWYu XLPE
14 4 0.66 1.52 1.25 1.27 22.91847
04PC2-I-YaOSSWYu PVC 89506PC2-I-XFOSSWYu XLPE
14 6 0.66 1.52 1.60 1.27 26.641197
06PC2-I-YaOSSWYu PVC 126008PC2-I-XFOSSWYu XLPE
14 8 0.66 1.52 1.60 1.27 28.981413
08PC2-I-YaOSSWYu PVC 149010PC2-I-XFOSSWYu XLPE
14 10 0.66 1.78 2.0 1.27 33.201900
10PC2-I-YaOSSWYu PVC 199012PC2-I-XFOSSWYu XLPE
14 12 0.66 1.78 2.0 1.27 34.042040
12PC2-I-YaOSSWYu PVC 215016PC2-I-XFOSSWYu XLPE
14 16 0.66 1.78 2.0 1.27 36.852414
16PC2-I-YaOSSWYu PVC 252024PC2-I-XFOSSWYu XLPE
14 24 0.66 2.03 2.50 1.52 45.683668
24PC2-I-YaOSSWYu PVC 382536PC2-I-XFOSSWYu XLPE
14 36 0.66 2.29 2.50 1.52 51.444713
36PC2-I-YaOSSWYu PVC 488002PC2-G-XFOSSWYu XLPE
12 2 0.66 1.27 1.25 1.27 21.73731
02PC2-G-YaOSSWYu PVC 77504PC2-G-XFOSSWYu XLPE
12 4 0.66 1.52 1.60 1.27 25.481145
04PC2-G-YaOSSWYu PVC 119506PC2-G-XFOSSWYu XLPE
12 6 0.66 1.52 1.60 1.27 28.951459
06PC2-G-YaOSSWYu PVC 153008PC2-G-XFOSSWYu XLPE
12 8 0.66 1.78 2.0 1.27 31.991967
08PC2-G-YaOSSWYu PVC 205510PC2-G-XFOSSWYu XLPE
12 10 0.66 1.78 2.0 1.27 33.102320
10PC2-G-YaOSSWYu PVC 240012PC2-G-XFOSSWYu XLPE
12 12 0.66 1.78 2.0 1.27 37.242512
12PC2-G-YaOSSWYu PVC 263516PC2-G-XFOSSWYu XLPE
12 16 0.66 2.03 2.50 1.27 42.003390
16PC2-G-YaOSSWYu PVC 354524PC2-G-XFOSSWYu XLPE
12 24 0.66 2.03 2.50 1.52 46.604579
24PC2-G-YaOSSWYu PVC 476536PC2-G-XFOSSWYu XLPE
12 36 0.66 2.29 2.50 1.52 53.105979
36PC2-G-YaOSSWYu PVC 6260
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-J-XFOSSWYu XLPE18 2 0.66 1.27 0.90 1.27 18.46
47202TC2-J-YaOSSWYu PVC 50004TC2-J-XFOSSWYu XLPE
18 4 0.66 1.27 1.25 1.27 21.13709
04TC2-J-YaOSSWYu PVC 75506TC2-J-XFOSSWYu XLPE
18 6 0.66 1.52 1.60 1.27 25.081040
06TC2-J-YaOSSWYu PVC 110008TC2-J-XFOSSWYu XLPE
18 8 0.66 1.52 1.60 1.27 27.201208
08TC2-J-YaOSSWYu PVC 128510TC2-J-XFOSSWYu XLPE
18 10 0.66 1.78 2.0 1.27 31.131470
10TC2-J-YaOSSWYu PVC 154512TC2-J-XFOSSWYu XLPE
18 12 0.66 1.78 2.0 1.27 31.901770
12TC2-J-YaOSSWYu PVC 186516TC2-J-XFOSSWYu XLPE
18 16 0.66 1.78 2.0 1.27 34.422046
16TC2-J-YaOSSWYu PVC 215524TC2-J-XFOSSWYu XLPE
18 24 0.66 2.03 2.50 1.27 38.903061
24TC2-J-YaOSSWYu PVC 325536TC2-J-XFOSSWYu XLPE
18 36 0.66 2.03 2.50 1.52 47.283872
36TC2-J-YaOSSWYu PVC 4120
![Page 23: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/23.jpg)
Page 22Industrial Cables
MULTI TRIAD XLPE/PVC UNSHIELDED WITH OVERALL SHIELD– WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-H-XFOSSWYu XLPE16 2 0.66 1.27 1.25 1.27 17.10
63502TC2-H-YaOSSWYu PVC 67004TC2-H-XFOSSWYu XLPE
16 4 0.66 1.52 1.25 1.27 23.03863
04TC2-H-YaOSSWYu PVC 90506TC2-H-XFOSSWYu XLPE
16 6 0.66 1.52 1.60 1.27 26.781221
06TC2-H-YaOSSWYu PVC 127808TC2-H-XFOSSWYu XLPE
16 8 0.66 1.52 1.60 1.27 29.151424
08TC2-H-YaOSSWYu PVC 151510TC2-H-XFOSSWYu XLPE
16 10 0.66 1.78 2.0 1.27 33.291914
10TC2-H-YaOSSWYu PVC 202012TC2-H-XFOSSWYu XLPE
16 12 0.66 1.78 2.0 1.27 34.242057
12TC2-H-YaOSSWYu PVC 218016TC2-H-XFOSSWYu XLPE
16 16 0.66 1.78 2.0 1.27 37.082435
16TC2-H-YaOSSWYu PVC 259024TC2-H-XFOSSWYu XLPE
16 24 0.66 2.03 2.50 1.52 45.973700
24TC2-H-YaOSSWYu PVC 393036TC2-H-XFOSSWYu XLPE
16 36 0.66 2.29 2.50 1.52 51.774759
36TC2-H-YaOSSWYu PVC 509002TC2-I-XFOSSWYu XLPE
14 2 0.66 1.27 1.25 1.27 21.71732
02TC2-I-YaOSSWYu PVC 77504TC2-I-XFOSSWYu XLPE
14 4 0.66 1.52 1.60 1.27 25.451148
04TC2-I-YaOSSWYu PVC 121006TC2-I-XFOSSWYu XLPE
14 6 0.66 1.52 1.60 1.27 28.921463
06TC2-I-YaOSSWYu PVC 154508TC2-I-XFOSSWYu XLPE
14 8 0.66 1.78 2.0 1.27 32.961973
08TC2-I-YaOSSWYu PVC 207510TC2-I-XFOSSWYu XLPE
14 10 0.66 1.78 2.0 1.27 36.252328
10TC2-I-YaOSSWYu PVC 242512TC2-I-XFOSSWYu XLPE
14 12 0.66 1.78 2.0 1.27 37.202521
12TC2-I-YaOSSWYu PVC 266516TC2-I-XFOSSWYu XLPE
14 16 0.66 2.03 2.50 1.27 41.953403
16TC2-I-YaOSSWYu PVC 354524TC2-I-XFOSSWYu XLPE
14 24 0.66 2.03 2.50 1.52 50.254559
24TC2-I-YaOSSWYu PVC 483036TC2-I-XFOSSWYu XLPE
14 36 0.66 2.29 2.50 1.52 56.776009
36TC2-I-YaOSSWYu PVC 635002TC2-G-XFOSSWYu XLPE
12 2 0.66 1.52 1.60 1.27 24.701041
02TC2-G-YaOSSWYu PVC 107504TC2-G-XFOSSWYu XLPE
12 4 0.66 1.52 1.60 1.27 27.581391
04TC2-G-YaOSSWYu PVC 146006TC2-G-XFOSSWYu XLPE
12 6 0.66 1.78 2.0 1.27 32.912041
06TC2-G-YaOSSWYu PVC 213508TC2-G-XFOSSWYu XLPE
12 8 0.66 1.78 2.0 1.27 35.992442
08TC2-G-YaOSSWYu PVC 256510TC2-G-XFOSSWYu XLPE
12 10 0.66 1.78 2.50 1.27 40.763177
10TC2-G-YaOSSWYu PVC 332012TC2-G-XFOSSWYu XLPE
12 12 0.66 2.03 2.50 1.52 42.913599
12TC2-G-YaOSSWYu PVC 371516TC2-G-XFOSSWYu XLPE
12 16 0.66 2.03 2.50 1.52 46.614315
16TC2-G-YaOSSWYu PVC 454024TC2-G-XFOSSWYu XLPE
12 24 0.66 2.29 2.50 1.52 56.065925
24TC2-G-YaOSSWYu PVC 624536TC2-G-XFOSSWYu XLPE
12 36 0.66 2.55 2.50 1.90 64.277972
36TC2-G-YaOSSWYu PVC 8445
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/Triad counts are available upon request. 3.) Dimensions of cables with Galvanised Double Steel Tape Armour are available upon request. 4.) Other jacket materials are available upon request. 5.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
![Page 24: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/24.jpg)
Page 23 Industrial Cables
1. Conductor: Stranded Plain/Tinned Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.4. Individual Screening/Shield: Aluminium-
Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
8. Armour: Galvanised Round Steel Wires.9. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Black).
MULTI PAIR XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-J-XFISSWYu XLPE18 2 0.66 1.27 0.90 1.27 17.85
44502PC2-J-YaISSWYu PVC 46504PC2-J-XFISSWYu XLPE
18 4 0.66 1.27 1.25 1.27 20.39660
04PC2-J-YaISSWYu PVC 69506PC2-J-XFISSWYu XLPE
18 6 0.66 1.52 1.25 1.27 23.47863
06PC2-J-YaISSWYu PVC 89508PC2-J-XFISSWYu XLPE
18 8 0.66 1.52 1.60 1.27 26.151124
08PC2-J-YaISSWYu PVC 118010PC2-J-XFISSWYu XLPE
18 10 0.66 1.52 1.60 1.27 28.571303
10PC2-J-YaISSWYu PVC 137012PC2-J-XFISSWYu XLPE
18 12 0.66 1.52 1.60 1.27 29.271409
12PC2-J-YaISSWYu PVC 147016PC2-J-XFISSWYu XLPE
18 16 0.66 1.78 2.0 1.27 32.091874
16PC2-J-YaISSWYu PVC 197024PC2-J-XFISSWYu XLPE
18 24 0.66 1.78 2.50 1.27 39.702755
24PC2-J-YaISSWYu PVC 258036PC2-J-XFISSWYu XLPE
18 36 0.66 2.03 2.50 1.52 45.153549
36PC2-J-YaISSWYu PVC 3840
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
12349 6 578
MULTI PAIR/TRIAD, XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD, STEEL WIRE ARMOURED INSTRUMENTATION CABLE
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 25: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/25.jpg)
Page 24Industrial Cables
MULTI PAIR XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-H-XFISSWYu XLPE16 2 0.66 1.27 1.25 1.27 19.56
58002PC2-H-YaISSWYu PVC 62004PC2-H-XFISSWYu XLPE
16 4 0.66 1.27 1.25 1.27 21.61747
04PC2-H-YaISSWYu PVC 80006PC2-H-XFISSWYu XLPE
16 6 0.66 1.52 1.60 1.27 25.681099
06PC2-H-YaISSWYu PVC 117008PC2-H-XFISSWYu XLPE
16 8 0.66 1.52 1.60 1.27 27.891295
08PC2-H-YaISSWYu PVC 138510PC2-H-XFISSWYu XLPE
16 10 0.66 1.78 1.60 1.27 31.931743
10PC2-H-YaISSWYu PVC 185512PC2-H-XFISSWYu XLPE
16 12 0.66 1.78 2.0 1.27 32.721865
12PC2-H-YaISSWYu PVC 199516PC2-H-XFISSWYu XLPE
16 16 0.66 1.78 2.0 1.27 35.362176
16PC2-H-YaISSWYu PVC 234024PC2-H-XFISSWYu XLPE
16 24 0.66 2.03 2.0 1.52 43.783308
24PC2-H-YaISSWYu PVC 355536PC2-H-XFISSWYu XLPE
16 36 0.66 2.03 2.50 1.52 48.684140
36PC2-H-YaISSWYu PVC 449002PC2-I-XFISSWYu XLPE
14 2 0.66 1.27 1.25 1.27 20.83687
02PC2-I-YaISSWYu PVC 70504PC2-I-XFISSWYu XLPE
14 4 0.66 1.52 1.25 1.27 23.69911
04PC2-I-YaISSWYu PVC 97006PC2-I-XFISSWYu XLPE
14 6 0.66 1.52 1.60 1.27 24.401292
06PC2-I-YaISSWYu PVC 137508PC2-I-XFISSWYu XLPE
14 8 0.66 1.78 2.0 1.27 31.401760
08PC2-I-YaISSWYu PVC 186510PC2-I-XFISSWYu XLPE
14 10 0.66 1.78 2.0 1.27 34.492052
10PC2-I-YaISSWYu PVC 217512PC2-I-XFISSWYu XLPE
14 12 0.66 1.78 2.0 1.27 35.372209
12PC2-I-YaISSWYu PVC 235016PC2-I-XFISSWYu XLPE
14 16 0.66 1.78 2.0 1.27 38.362619
16PC2-I-YaISSWYu PVC 280024PC2-I-XFISSWYu XLPE
14 24 0.66 2.03 2.50 1.52 47.613979
24PC2-I-YaISSWYu PVC 425036PC2-I-XFISSWYu XLPE
14 36 0.66 2.29 2.50 1.52 53.695169
36PC2-I-YaISSWYu PVC 552002PC2-G-XFISSWYu XLPE
12 2 0.66 1.52 1.25 1.27 22.94811
02PC2-G-YaISSWYu PVC 85004PC2-G-XFISSWYu XLPE
12 4 0.66 1.52 1.60 1.27 26.301221
04PC2-G-YaISSWYu PVC 128506PC2-G-XFISSWYu XLPE
12 6 0.66 1.78 2.0 1.27 31.321788
06PC2-G-YaISSWYu PVC 188008PC2-G-XFISSWYu XLPE
12 8 0.66 1.78 2.0 1.27 34.162101
08PC2-G-YaISSWYu PVC 221510PC2-G-XFISSWYu XLPE
12 10 0.66 1.78 2.0 1.27 37.642473
10PC2-G-YaISSWYu PVC 261012PC2-G-XFISSWYu XLPE
12 12 0.66 1.78 2.0 1.27 38.662683
12PC2-G-YaISSWYu PVC 284016PC2-G-XFISSWYu XLPE
12 16 0.66 2.03 2.50 1.52 40.403678
16PC2-G-YaISSWYu PVC 389524PC2-G-XFISSWYu XLPE
12 24 0.66 2.29 2.50 1.52 49.204996
24PC2-G-YaISSWYu PVC 530036PC2-G-XFISSWYu XLPE
12 36 0.66 2.29 2.50 1.52 59.216438
36PC2-G-YaISSWYu PVC 6840
![Page 26: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/26.jpg)
Page 25 Industrial Cables
MULTI TRIAD XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/Triad counts are available upon request. 3.) Dimensions of cables with Galvanised Double Steel Tape Armour are available upon request. 4.) Other jacket materials are available upon request. 5.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-J-XFISSWYu XLPE18 2 0.66 1.27 1.25 1.27 20.35
62002TC2-J-YaISSWYu PVC 65004TC2-J-XFISSWYu XLPE
18 4 0.66 1.52 1.25 1.27 23.10832
04TC2-J-YaISSWYu PVC 87506TC2-J-XFISSWYu XLPE
18 6 0.66 1.52 1.60 1.27 26.871176
06TC2-J-YaISSWYu PVC 123508TC2-J-XFISSWYu XLPE
18 8 0.66 1.52 1.60 1.27 29.251363
08TC2-J-YaISSWYu PVC 144010TC2-J-XFISSWYu XLPE
18 10 0.66 1.78 2.0 1.27 33.511838
10TC2-J-YaISSWYu PVC 193012TC2-J-XFISSWYu XLPE
18 12 0.66 1.78 2.0 1.27 34.361989
12TC2-J-YaISSWYu PVC 207016TC2-J-XFISSWYu XLPE
18 16 0.66 1.78 2.0 1.27 37.222312
16TC2-J-YaISSWYu PVC 244524TC2-J-XFISSWYu XLPE
18 24 0.66 2.03 2.50 1.52 46.153575
24TC2-J-YaISSWYu PVC 372036TC2-J-XFISSWYu XLPE
18 36 0.66 2.29 2.50 1.52 51.984519
36TC2-J-YaISSWYu PVC 477002TC2-H-XFISSWYu XLPE
16 2 0.66 1.27 1.25 1.27 21.57698
02TC2-H-YaISSWYu PVC 74004TC2-H-XFISSWYu XLPE
16 4 0.66 1.52 1.60 1.27 25.281080
04TC2-H-YaISSWYu PVC 112506TC2-H-XFISSWYu XLPE
16 6 0.66 1.52 1.60 1.27 28.701347
06TC2-H-YaISSWYu PVC 143508TC2-H-XFISSWYu XLPE
16 8 0.66 1.78 2.0 1.27 32.711839
08TC2-H-YaISSWYu PVC 195010TC2-H-XFISSWYu XLPE
16 10 0.66 1.78 2.0 1.27 35.962137
10TC2-H-YaISSWYu PVC 227012TC2-H-XFISSWYu XLPE
16 12 0.66 1.78 2.0 1.27 36.902322
12TC2-H-YaISSWYu PVC 245016TC2-H-XFISSWYu XLPE
16 16 0.66 2.03 2.50 1.27 41.613100
16TC2-H-YaISSWYu PVC 330024TC2-H-XFISSWYu XLPE
16 24 0.66 2.03 2.50 1.52 49.814162
24TC2-H-YaISSWYu PVC 446036TC2-H-XFISSWYu XLPE
16 36 0.66 2.29 2.50 1.52 56.265377
36TC2-H-YaISSWYu PVC 580502TC2-I-XFOISWYu XLPE
14 2 0.66 1.52 1.25 1.27 23.64843
02TC2-I-YaISSWYu PVC 89004TC2-I-XFISSWYu XLPE
14 4 0.66 1.52 1.60 1.27 27.141253
04TC2-I-YaISSWYu PVC 132506TC2-I-XFISSWYu XLPE
14 6 0.66 1.78 2.0 1.27 32.361835
06TC2-I-YaISSWYu PVC 194008TC2-I-XFISSWYu XLPE
14 8 0.66 1.78 2.0 1.27 35.382177
08TC2-I-YaISSWYu PVC 230010TC2-I-XFISSWYu XLPE
14 10 0.66 1.78 2.50 1.27 40.042839
10TC2-I-YaISSWYu PVC 271012TC2-I-XFISSWYu XLPE
14 12 0.66 2.03 2.50 1.27 41.633152
12TC2-I-YaISSWYu PVC 333516TC2-I-XFISSWYu XLPE
14 16 0.66 2.03 2.50 1.52 45.673801
16TC2-I-YaISSWYu PVC 403524TC2-I-XFISSWYu XLPE
14 24 0.66 2.29 2.50 1.52 46.305135
24TC2-I-YaISSWYu PVC 548036TC2-I-XFISSWYu XLPE
14 36 0.66 2.55 2.50 1.90 63.006830
36TC2-I-YaISSWYu PVC 735002TC2-G-XFISSWYu XLPE
12 2 0.66 1.52 1.60 1.27 26.241129
02TC2-G-YaISSWYu PVC 116004TC2-G-XFISSWYu XLPE
12 4 0.66 1.52 1.60 1.27 29.441526
04TC2-G-YaISSWYu PVC 160006TC2-G-XFISSWYu XLPE
12 6 0.66 1.78 2.0 1.27 35.212230
06TC2-G-YaISSWYu PVC 234008TC2-G-XFISSWYu XLPE
12 8 0.66 1.78 2.0 1.27 38.642654
08TC2-G-YaISSWYu PVC 280010TC2-G-XFISSWYu XLPE
12 10 0.66 2.03 2.50 1.52 44.893614
10TC2-G-YaISSWYu PVC 380012TC2-G-XFISSWYu XLPE
12 12 0.66 2.03 2.50 1.52 46.113920
12TC2-G-YaISSWYu PVC 412016TC2-G-XFISSWYu XLPE
12 16 0.66 2.03 2.50 1.52 50.224679
16TC2-G-YaISSWYu PVC 495024TC2-G-XFISSWYu XLPE
12 24 0.66 2.55 2.50 1.52 61.236540
24TC2-G-YaISSWYu PVC 692036TC2-G-XFISSWYu XLPE
12 36 0.66 2.55 2.50 1.52 69.958656
36PC2-G-YaISSWYu PVC 9220
![Page 27: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/27.jpg)
Page 26Industrial Cables
APPLICATION
• The cables are recommended for indoor and outdoor installation in dry and wet locations, in cable racks and trays, in conduits and suitable for direct burial.
• For Transmission of analogue and digital signals in instrument and control systems; allowed for use in hazardous classified locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources, e.g. public mains electricity supply.
• For industrial automation process that applies a basic or advanced control system.
ELECTRICAL PROPERTIES OF 300V FOUNDATION FIELDBUS
Conductor size (AWG) 18
Max. Conductor Resistance @ 20°C Ω / km ≤ 24.0
Max. Mutual Capacitance (between conductors) nF/Km ≤ 115
Max. attenuation at 1.25 fr (39 kHz) dB/Km ≤ 3.0
Max. Propagation delay change 0.25 fr to 1.25 fr µs/Km ≤ 1.7
Max. Capacitance unbalance (wire to shield) nF/Km ≤ 4
Zo at fr (31.25 kHz) Ω 100 Ω ± 20 %
Insulation Resistance in water @ 15.6°C MΩ – Km ≥ 700
Dielectric Voltage Withstand Test 1500 VAC for 1 Minute
PHYSICAL PROPERTIES
Flame Retardancy Passes UL 1685 vertical tray flame test & IEC 60332-3 Cat.A or C
Sunlight Resistance Passes UL-1581 test (720 hours)
Oil Resistance Passes UL-13 test (Oil I)
Minimum Bending Radius7.5 x Cable Outside Diameter (for unarmoured cables)10 x Cable Outside Diameter (for armoured cables)
Temperature Range (operation)During Operation: -30°C to +90°CDuring Installation: -5°C to +50°C
INSULATION AND JACKET COLOURS
Pair colour Black & White. Other pair colours are available upon request.
Jacket colour Orange. Other colours are available upon request.
Single & Multipair and Multi-Triple, individual and /or Collective screen, PVC- sheath
Cable Features:UnarmouredArmoured
Common Cable Construction:Conductor Type– Stranded Tinned Copper
Insulation Material– XLPE 90°C– PVC 90°C
Unarmoured
Armoured– Galvanised Steel Wires– Double Steel Tape
Jackets– PVC Flame Retardant, Oil and Sunlight Resistant– Low Smoke Zero Halogen Free
FOUNDATION FIELDBUS CABLE TO IEC 61158-2 TYPE A.UL 13 / UL 2250, PLTC / ITC, 90°C / 300VFOUNDATION FIELDBUS CABLE TO IEC 61158-2 TYPE A
![Page 28: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/28.jpg)
Page 27 Industrial Cables
SINGLE PAIR XLPE SHIELDED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Stranded Tinned Copper conductor.
2. Insulation: XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with filler and polyester wrapping tape.
4. Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Orange).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
SCCItem Code
Insulation Material Type
Conductor size (AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net WeightApprox. (kg/
km)01PT2-J-XFOSYu XLPE 18 0.65 1.02 8.80 58
12345
SINGLE PAIR, XLPE, SHIELDED, UNARMOURED, FOUNDATION FIELDBUS CABLE
UL 13 / UL 2250, PLTC/ITC, 90°C / 300VFOUNDATION FIELDBUS CABLE TO IEC 61158-2 TYPE A
![Page 29: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/29.jpg)
Page 28Industrial Cables
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
1. Conductor: Stranded Tinned Copper conductor.
2. Insulation: XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with filler and polyester wrapping tape.
4. Individual Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Orange).
MULTI PAIR XLPE WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-J-XFISYu XLPE 18 2 0.65 1.27 13.40 13604TC2-J-XFISYu XLPE 18 4 0.65 1.27 15.20 21206TC2-J-XFISYu XLPE 18 6 0.65 1.27 18.30 31208TC2-J-XFISYu XLPE 18 8 0.65 1.27 20.25 39110TC2-J-XFISYu XLPE 18 10 0.65 1.27 22.70 47312TC2-J-XFISYu XLPE 18 12 0.65 1.27 23.40 54316TC2-J-XFISYu XLPE 18 16 0.65 1.78 26.30 71924TC2-J-XFISYu XLPE 18 24 0.65 1.78 32.00 102636TC2-J-XFISYu XLPE 18 36 0.65 2.03 36.95 1491
12347 56
MULTI PAIR, XLPE WITH INDIVIDUAL AND OVERALL SHIELD, UNARMOURED, FOUNDATION FIELDBUS CABLE
UL 13 / UL 2250, PLTC/ITC, 90°C / 300VFOUNDATION FIELDBUS CABLE TO IEC 61158-2 TYPE A
![Page 30: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/30.jpg)
Page 29 Industrial Cables
SINGLE PAIR XLPE SHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Stranded Tinned Copper conductor.
2. Insulation: XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with filler and polyester wrapping tape.
4. Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
6. Armour: Galvanised Round Steel Wires.7. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Orange).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01PT2-J-XFOSSWYu XLPE 18 0.65 1.02 0.90 1.02 13.00 250
12347 56
SINGLE PAIR, XLPE, SHIELDED, STEEL WIRE ARMOURED, FOUNDATION FIELDBUS CABLE
UL 13 / UL 2250, PLTC/ITC, 90°C / 300VFOUNDATION FIELDBUS CABLE TO IEC 61158-2 TYPE A
![Page 31: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/31.jpg)
Page 30Industrial Cables
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
1. Conductor: Stranded Tinned Copper conductor.
2. Insulation: XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with filler and polyester wrapping tape.
4. Individual Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
8. Armour: Galvanised Round Steel Wires.9. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Orange).
MULTI PAIR XLPE WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-J-XFISWFYu XLPE 18 2 0.65 1.27 0.90 1.27 17.85 44504TC2-J-XFISSWYu XLPE 18 4 0.65 1.27 1.25 1.27 20.40 66006TC2-J-XFISSWYu XLPE 18 6 0.65 1.52 1.25 1.27 23.45 86308TC2-J-XFISSWYu XLPE 18 8 0.65 1.52 1.60 1.27 26.15 112410TC2-J-XFISSWYu XLPE 18 10 0.65 1.52 1.60 1.27 28.55 130312TC2-J-XFISSWYu XLPE 18 12 0.65 1.52 1.60 1.27 29.25 140916TC2-J-XFISSWYu XLPE 18 16 0.65 1.78 2.00 1.27 33.00 187424TC2-J-XFISSWYu XLPE 18 24 0.65 1.78 2.50 1.27 39.70 275536TC2-J-XFISSWYu XLPE 18 36 0.65 2.03 2.50 1.52 45.15 2549
12349 5678
MULTI PAIR, XLPE WITH INDIVIDUAL AND OVERALL SHIELD, STEEL WIRE ARMOURED, FOUNDATION FIELDBUS CABLE
UL 13 / UL 2250, PLTC/ITC, 90°C / 300VFOUNDATION FIELDBUS CABLE TO IEC 61158-2 TYPE A
![Page 32: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/32.jpg)
Page 31 Industrial Cables
A P P L I C A T I O N
• The cables are recommended for indoor and outdoor installation in dry and wet locations, in cable racks and trays, in conduits and suitable for direct burial.
• For the transmission of thermoelectric voltage from measuring junction to reference junction; allowed for use in zone 1 and zone 2, group II, classified areas (IEC 79-14).
Single & Multipair and Multi-Triple, individual and /or Collective screen, PVC- sheath
TABLE 1: TYPES AND COLOUR CODES OF THERMOCOUPLE CABLES
THERMOCOUPLE IEC 60584 ANSI MC 96.1
TYPEMATERIAL INSULATION AND JACKET COLOUR INSULATION AND JACKET COLOUR
Positive Leg (+)
Negative Leg (-)
Positive Leg (+)
Negative Leg (-) Jacket Positive
Leg (+)Negative
Leg (-) Jacket
KNickel-
ChromiumNickel-
AluminiumGreen White Green Yellow Red Yellow
ENickel-
ChromiumCopper Nickel
Purple White Purple Purple Red Purple
J IronCopper Nickel
Black White Black White Red Black
T CopperCopper Nickel
Brown White Brown Blue Red Blue
NNickel-
Chromium Silicon
Nickel-Silicon Pink White Pink Orange Red Orange
THERMOCOUPLE TEMPERATURE RANGE
Types* Temperature Range
K -20°C to 200°C
E -20°C to 200°C
J -20°C to 200°C
T -59°C to 68°C
N -20°C to 200°C
PHYSICAL PROPERTIES
Flame Retardancy Passes UL 1685 vertical tray flame test & IEC 60332-3 Cat. A or C
Sunlight Resistance Passes UL-1581 test (720 hours)
Oil Resistance Passes UL-13 test (Oil I)
Minimum Bending Radius7.5 x Cable Outside Diameter (for unarmoured cables) 10 x Cable Outside Diameter (for armoured cables)
Temperature Range (operation)During Operation: -30°C to +90°C During Installation: -5°C to +50°C
Cable Features:UnarmouredArmoured
Common Cable Construction:Conductor Type– Thermocouple Extension, (Table 1)
Insulation Material– XLPE 90°C– PVC 90°C
Unarmoured
Armoured– Galvanised Steel Wires– Double Steel Tape
Jackets– PVC Flame Retardant, Oil and Sunlight Resistant– Low Smoke Zero Halogen Free
* Other types are available upon request.
THERMOCOUPLE CABLES TO ANSI MC 96.1 AND IEC 60584
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLES
![Page 33: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/33.jpg)
Page 32Industrial Cables
SINGLE PAIR XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Thermocouple Extension conductor (see Table 1).
2. Insulation: PVC FR 90°C, XLPE FR 90°C.
3. Pairing/Triads: Uniformly twisted insulated conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Yellow).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
Note: 1.) For other types of thermocouple, simply replace “KX” to type required in Table 1. 2.) Other jacket materials are available upon request. 3.) Standard cutting length 1000m ± 5%, other lengths are available upon request.
SCCItem Code
Insulation Material Type
Conductor size (AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/
km)01PKX-J-XFYu XLPE
18 0.40 0.89 7.3039
01PKX-J-YaYu PVC 4101PKX-H-XFYu XLPE
16 0.40 0.89 7.8551
01PKX-H-YaYu PVC 5401PKX-I-XFYu XLPE
14 0.40 1.02 9.3269
01PKX-I-YaYu PVC 7201PKX-G-XFYu XLPE
12 0.40 1.02 10.16100
01PKX-G-YaYu PVC 103
1234
SINGLE PAIR, XLPE/PVC, UNSHIELDED, UNARMOURED, THERMOCOUPLE CABLES
UL 13/UL 2250, PLTC/ITC, 90°C/300VTHERMOCOUPLE CABLES
![Page 34: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/34.jpg)
Page 33 Industrial Cables
SINGLE PAIR XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Thermocouple Extension conductor (see Table 1).
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted
insulated conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Screening/Shielding: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Yellow).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
Note: 1.) For other types of thermocouple, simply replace “KX” to type required in Table 1. 2.) Other jacket materials are available upon request. 3.) Standard cutting length 1000m ± 5%, other lengths are available upon request.
SCCItem Code
Insulation Material Type
Conductor size (AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/
km)01PKX-J-XFOSYu XLPE
18 0.40 0.89 7.4445
01PKX-J-YaOSYu PVC 4701PKX-H-XFOSYu XLPE
16 0.40 0.89 7.9858
01PKX-H-YaOSYu PVC 6001PKX-I-XFOSYu XLPE
14 0.40 1.02 9.4585
01PKX-I-YaOSYu PVC 8901PKX-G-XFOSYu XLPE
12 0.40 1.02 10.29112
01PKX-G-YaOSYu PVC 116
12345
SINGLE PAIR, XLPE/PVC, SHIELDED, UNARMOURED THERMOCOUPLE CABLES
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLES
![Page 35: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/35.jpg)
Page 34Industrial Cables
MULTI PAIR XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Thermocouple Extension conductor (see Table 1).
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Yellow).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-J-XFYu XLPE18 2 0.40 1.02 9.68 71
02PKX-J-YaYu PVC 7504PKX-J-XFYu XLPE
18 4 0.40 1.02 10.93 11304PKX-J-YaYu PVC 12106PKX-J-XFYu XLPE
18 6 0.40 1.27 13.19 17206PKX-J-YaYu PVC 18308PKX-J-XFYu XLPE
18 8 0.40 1.27 14.54 21608PKX-J-YaYu PVC 23110PKX-J-XFYu XLPE
18 10 0.40 1.27 16.18 26210PKX-J-YaYu PVC 28112PKX-J-XFYu XLPE
18 12 0.40 1.27 16.66 30112PKX-J-YaYu PVC 32316PKX-J-XFYu XLPE
18 16 0.40 1.52 18.79 40316PKX-J-YaYu PVC 43324PKX-J-XFYu XLPE
18 24 0.40 1.52 22.67 57524PKX-J-YaYu PVC 62036PKX-J-XFYu XLPE
18 36 0.40 1.78 26.20 84336PKX-J-YaYu PVC 910
12345
MULTI PAIR, XLPE/PVC, UNSHIELDED, UNARMOURED THERMOCOUPLE CABLES
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLES
![Page 36: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/36.jpg)
Page 35 Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-H-XFYu XLPE16 2 0.40 1.02 10.57
9602PKX-H-YaYu PVC 10004PKX-H-XFYu XLPE
16 4 0.40 1.27 12.53171
04PKX-H-YaYu PVC 18006PKX-H-XFYu XLPE
16 6 0.40 1.27 14.52240
06PKX-H-YaYu PVC 25308PKX-H-XFYu XLPE
16 8 0.40 1.27 16.07305
08PKX-H-YaYu PVC 32310PKX-H-XFYu XLPE
16 10 0.40 1.52 18.47392
10PKX-H-YaYu PVC 41412PKX-H-XFYu XLPE
16 12 0.40 1.52 19.02452
12PKX-H-YaYu PVC 47916PKX-H-XFYu XLPE
16 16 0.40 1.52 20.87577
16PKX-H-YaYu PVC 61324PKX-H-XFYu XLPE
16 24 0.40 1.78 25.88863
24PKX-H-YaYu PVC 91636PC2-H-XFYu XLPE
16 36 0.40 1.78 29.301227
36PKX-H-YaYu PVC 130702PKX-I-XFYu XLPE
14 2 0.40 1.27 13.06153
02PKX-I-YaYu PVC 16104PKX-I-XFYu XLPE
14 4 0.40 1.27 14.92255
04PKX-I-YaYu PVC 27006PKX-I-XFYu XLPE
14 6 0.40 1.52 17.99380
06PKX-I-YaYu PVC 40208PKX-I-XFYu XLPE
14 8 0.40 1.52 19.98484
08PKX-I-YaYu PVC 51410PKX-I-XFYu XLPE
14 10 0.40 1.52 22.41592
10PKX-I-YaYu PVC 63012PKX-I-XFYu XLPE
14 12 0.40 1.52 23.11687
12PKX-I-YaYu PVC 73216PKX-I-XFYu XLPE
14 16 0.40 1.78 26.04915
16PKX-I-YaYu PVC 97524PKX-I-XFYu XLPE
14 24 0.40 1.78 31.781324
24PKX-I-YaYu PVC 141536PKX-I-XFYu XLPE
14 36 0.40 2.03 36.711944
36PKX-I-YaYu PVC 207902PKX-G-XFYu XLPE
12 2 0.40 1.27 14.44208
02PKX-G-YaYu PVC 21704PKX-G-XFYu XLPE
12 4 0.40 1.27 16.58356
04PKX-G-YaYu PVC 37406PKX-G-XFYu XLPE
12 6 0.40 1.52 20.06533
06PKX-G-YaYu PVC 55908PKX-G-XFYu XLPE
12 8 0.40 1.52 22.36685
08PKX-G-YaYu PVC 72110PC2-G-XFYu XLPE
12 10 0.40 1.78 25.71871
10PKX-G-YaYu PVC 91612PKX-G-XFYu XLPE
12 12 0.40 1.78 26.531014
12PKX-G-YaYu PVC 106816PKX-G-XFYu XLPE
12 16 0.40 1.78 29.281310
16PKX-G-YaYu PVC 138224PKX-G-XFYu XLPE 12 24 0.40 2.03 36.43 195124PKX-G-YaYu PVC 205936PKX-G-XFYu XLPE
12 36 0.40 2.03 41.532816
36PKX-G-YaYu PVC 2978
MULTI PAIR XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For other types of thermocouple, simply replace “KX” to type required in Table 1. 2.) Other jacket materials are available upon request. 3.) Standard cutting length 1000m ± 5%, other lengths are available upon request.
![Page 37: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/37.jpg)
Page 36Industrial Cables
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Thermocouple Extension conductor (see Table 1).
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
6. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Yellow).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-J-XFOSYu XLPE18 2 0.40 1.02 10.04
7902PKX-J-YaOSYu PVC 8304PKX-J-XFOSYu XLPE
18 4 0.40 1.27 11.82133
04PKX-J-YaOSYu PVC 14106PKX-J-XFOSYu XLPE
18 6 0.40 1.27 13.55181
06PKX-J-YaOSYu PVC 19208PKX-J-XFOSYu XLPE
18 8 0.40 1.52 14.90225
08PKX-J-YaOSYu PVC 24010PKX-J-XFOSYu XLPE
18 10 0.40 1.52 16.54272
10PKX-J-YaOSYu PVC 29012PKX-J-XFOSYu XLPE
18 12 0.40 1.52 17.54329
12PKX-J-YaOSYu PVC 35216PKX-J-XFOSYu XLPE
18 16 0.40 1.78 19.15414
16PKX-J-YaOSYu PVC 44424PC2-J-XFOSYu XLPE
18 24 0.40 1.78 23.03587
24PKX-J-YaOSYu PVC 63236PKX-J-XFOSYu XLPE
18 36 0.40 1.78 26.56856
36PKX-J-YaOSYu PVC 923
12345 6
MULTI PAIR, XLPE/PVC, UNSHIELDED WITH OVERALL SHIELD, UNARMOURED THERMOCOUPLE CABLES
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLESUL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLES
![Page 38: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/38.jpg)
Page 37 Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-H-XFOSYu XLPE16 2 0.40 1.02 10.93
10402PKX-H-YaOSYu PVC 10804PKX-H-XFOSYu XLPE
16 4 0.40 1.27 12.89180
04PKX-H-YaOSYu PVC 18906PKX-H-XFOSYu XLPE
16 6 0.40 1.27 14.88249
06PKX-H-YaOSYu PVC 26208PKX-H-XFOSYu XLPE
16 8 0.40 1.27 16.43314
08PKX-H-YaOSYu PVC 33210PKX-H-XFOSYu XLPE
16 10 0.40 1.52 18.83403
10PKX-H-YaOSYu PVC 42512PKX-H-XFOSYu XLPE
16 12 0.40 1.52 19.38463
12PKX-H-YaOSYu PVC 48916PKX-H-XFOSYu XLPE
16 16 0.40 1.52 21.23588
16PKX-H-YaOSYu PVC 62424PKX-H-XFOSYu XLPE
16 24 0.40 1.78 26.24879
24PKX-H-YaOSYu PVC 92936PKX-H-XFOSYu XLPE
16 36 0.40 1.78 29.661241
36PKX-H-YaOSYu PVC 132102PKX-I-XFOSYu XLPE
14 2 0.40 1.27 13.42162
02PKX-I-YaOSYu PVC 17004PKX-I-XFOSYu XLPE
14 4 0.40 1.27 15.28264
04PKX-I-YaOSYu PVC 27906PKX-I-XFOSYu XLPE
14 6 0.40 1.52 18.35390
06PKX-I-YaOSYu PVC 41308PKX-I-XFOSYu XLPE
14 8 0.40 1.52 20.34495
08PKX-I-YaOSYu PVC 52510PKX-I-XFOSYu XLPE
14 10 0.40 1.52 22.77604
10PKX-I-YaOSYu PVC 64112PKX-I-XFOSYu XLPE
14 12 0.40 1.52 23.47699
12PKX-I-YaOSYu PVC 74416PKX-I-XFOSYu XLPE
14 16 0.40 1.78 26.40928
16PKX-I-YaOSYu PVC 98824PKX-I-XFOSYu XLPE
14 24 0.40 1.78 32.141338
24PKX-I-YaOSYu PVC 142936PKX-I-XFOSYu XLPE
14 36 0.40 2.03 37.071959
36PKX-I-YaOSYu PVC 209502PKX-G-XFOSYu XLPE
12 2 0.40 1.27 14.80217
02PKX-G-YaOSYu PVC 22604PKX-G-XFOSYu XLPE
12 4 0.40 1.52 17.46385
04PKX-G-YaOSYu PVC 40306PKX-G-XFOSYu XLPE
12 6 0.40 1.52 20.42543
06PKX-G-YaOSYu PVC 57008PKX-G-XFOSYu XLPE
12 8 0.40 1.52 22.72697
08PKX-G-YaOSYu PVC 73310PKX-G-XFOSYu XLPE
12 10 0.40 1.78 26.07884
10PKX-G-YaOSYu PVC 92912PKX-G-XFOSYu XLPE
12 12 0.40 1.78 26.891027
12PKX-G-YaOSYu PVC 108116PKX-G-XFOSYu XLPE
12 16 0.40 1.78 29.641323
16PKX-G-YaOSYu PVC 139524PKX-G-XFOSYu XLPE 12 24 0.40 2.03 36.79 196724PKX-G-YaOSYu PVC 207536PKX-G-XFOSYu XLPE
12 36 0.40 2.03 41.892833
36PKX-G-YaOSYu PVC 2995
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For other types of thermocouple, simply replace “KX” to type required in Table 1. 2.) Other jacket materials are available upon request. 3.) Standard cutting length 1000m ± 5%, other lengths are available upon request.
![Page 39: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/39.jpg)
Page 38Industrial Cables
MULTI PAIR XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Thermocouple Extension conductor (see Table 1).
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Individual Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Yellow).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-J-XFISYu XLPE18 2 0.40 1.02 10.70
9702PKX-J-YaISYu PVC 10104PKX-J-XFISYu XLPE
18 4 0.40 1.27 12.65168
04PKX-J-YaISYu PVC 17606PKX-J-XFISYu XLPE
18 6 0.40 1.27 14.56230
06PKX-J-YaISYu PVC 24208PKX-J-XFISYu XLPE
18 8 0.40 1.52 16.05290
08PKX-J-YaISYu PVC 30610PKX-J-XFISYu XLPE
18 10 0.40 1.52 18.40372
10PKX-J-YaISYu PVC 39212PKX-J-XFISYu XLPE
18 12 0.40 1.52 18.93427
12PKX-J-YaISYu PVC 45116PKX-J-XFISYu XLPE
18 16 0.40 1.52 20.72541
16PKX-J-YaISYu PVC 57324PC2-J-XFISYu XLPE
18 24 0.40 1.78 25.58805
24PKX-J-YaISYu PVC 85236PKX-J-XFISYu XLPE
18 36 0.40 1.78 28.901136
36PKX-J-YaISYu PVC 1208
12356 47
MULTI PAIR, XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD, UNARMOURED THERMOCOUPLE CABLES
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLES
![Page 40: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/40.jpg)
Page 39 Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-H-XFISYu XLPE16 2 0.40 1.27 12.15
13402PKX-H-YaISYu PVC 13904PKX-H-XFISYu XLPE
16 4 0.40 1.27 13.75215
04PKX-H-YaISYu PVC 22406PKX-H-XFISYu XLPE
16 6 0.40 1.27 15.90299
06PKX-H-YaISYu PVC 31308PKX-H-XFISYu XLPE
16 8 0.40 1.52 18.15400
08PKX-H-YaISYu PVC 41810PKX-H-XFISYu XLPE
16 10 0.40 1.52 20.20486
10PKX-H-YaISYu PVC 50912PKX-H-XFISYu XLPE
16 12 0.40 1.52 20.80561
12PKX-H-YaISYu PVC 58916PKX-H-XFISYu XLPE
16 16 0.40 1.52 22.85717
16PKX-H-YaISYu PVC 75424PKX-H-XFISYu XLPE
16 24 0.40 1.78 28.301068
24PKX-H-YaISYu PVC 112536PKX-H-XFISYu XLPE
16 36 0.40 1.78 32.051523
36PKX-H-YaISYu PVC 160802PKX-I-XFISYu XLPE
14 2 0.40 1.27 13.29172
02PKX-I-YaISYu PVC 17804PKX-I-XFISYu XLPE
14 4 0.40 1.27 15.11285
04PKX-I-YaISYu PVC 29606PKX-I-XFISYu XLPE
14 6 0.40 1.52 18.15421
06PKX-I-YaISYu PVC 43808PKX-I-XFISYu XLPE
14 8 0.40 1.52 20.11537
08PKX-I-YaISYu PVC 56010PKX-I-XFISYu XLPE
14 10 0.40 1.52 22.49656
10PKX-I-YaISYu PVC 68512PKX-I-XFISYu XLPE
14 12 0.40 1.52 23019763
12PKX-I-YaISYu PVC 79716PKX-I-XFISYu XLPE
14 16 0.40 1.78 26.091013
16PKX-I-YaISYu PVC 105824PKX-I-XFISYu XLPE
14 24 0.40 1.78 31.731466
24PKX-I-YaISYu PVC 153436PKX-I-XFISYu XLPE
14 36 0.40 2.03 36.602152
36PKX-I-YaISYu PVC 225402PKX-G-XFISYu XLPE
12 2 0.40 1.27 14.70226
02PKX-G-YaISYu PVC 23304PKX-G-XFISYu XLPE
12 4 0.40 1.27 16.82386
04PKX-G-YaISYu PVC 40006PKX-G-XFISYu XLPE
12 6 0.40 1.52 20.25573
06PKX-G-YaISYu PVC 59408PKX-G-XFISYu XLPE 12 8 0.40 1.52 22.55 73608PKX-G-YaISYu PVC 76410PKX-G-XFISYu XLPE
12 10 0.40 1.78 25.87934
10PKX-G-YaISYu PVC 96812PKX-G-XFISYu XLPE
12 12 0.40 1.78 26.651087
12PKX-G-YaISYu PVC 112816PKX-G-XFISYu XLPE
12 16 0.40 1.78 29.401403
16PKX-G-YaISYu PVC 145824PKX-G-XFISYu XLPE
12 24 0.40 2.03 36.502169
24PKX-G-YaISYu PVC 208736PKX-G-XFISYu XLPE
12 36 0.40 2.03 41.503015
36PKX-G-YaISYu PVC 3137
MULTI PAIR XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For other types of thermocouple, simply replace “KX” to type required in Table 1. 2.) Other jacket materials are available upon request. 3.) Standard cutting length 1000m ± 5%, other lengths are available upon request.
![Page 41: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/41.jpg)
Page 40Industrial Cables
1. Conductor: Thermocouple Extension conductor (see Table 1).
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
5. Armour: Galvanised Round Steel Wires.6. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Yellow).
SINGLE PAIR XLPE/PVC UNSHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01PKX-J-XFSWYu XLPE18 0.40 0.89 0.90 0.89 10.98
16801PKX-J-YaSWYu PVC 17001PKX-H-XFSWYu XLPE
16 0.40 0.89 0.90 1.02 11.79200
01PKX-H-YaSWYu PVC 20201PKX-I-XFSWYu XLPE
14 0.40 1.02 0.90 1.02 13.26236
01PKX-I-YaSWYu PVC 23901PKX-G-XFSWYu XLPE
12 0.40 1.02 0.90 1.02 14.10287
01PKX-G-YaSWYu PVC 291
Note: 1.) For other types of thermocouple, simply replace “KX” to type required in Table 1. 2.) Other jacket materials are available upon request. 3.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
12346 5
SINGLE PAIR, XLPE/PVC, UNSHIELDED, STEEL WIRE ARMOURED THERMOCOUPLE CABLES
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLES
![Page 42: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/42.jpg)
Page 41 Industrial Cables
1. Conductor: Thermocouple Extension conductor (see Table 1).
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Screening/Shielding: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
6. Armour: Galvanised Round Steel Wires.7. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Yellow).
SINGLE PAIR XLPE/PVC SHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01PKX-J-XFOSSWYu XLPE18 0.40 0.89 0.90 1.02 11.38
18801PKX-J-YaOSSWYu PVC 19001PKX-H-XFOSSWYu XLPE
16 0.40 0.89 0.90 1.02 11.92213
01PKX-H-YaOSSWYu PVC 21501PKX-I-XFOSSWYu XLPE
14 0.40 1.02 0.90 1.02 13.39272
01PKX-I-YaOSSWYu PVC 27601PKX-G-XFOSSWYu XLPE
12 0.40 1.02 0.90 1.02 14.23318
01PKX-G-YaOSSWYu PVC 323
Note: 1.) For other types of thermocouple, simply replace “KX” to type required in Table 1. 2.) Other jacket materials are available upon request. 3.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
12367 5 4
SINGLE PAIR, XLPE/PVC, SHIELDED, ARMOURED THERMOCOUPLE CABLES
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLES
![Page 43: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/43.jpg)
Page 42Industrial Cables
1. Conductor: Thermocouple Extension conductor (see Table 1).
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
6. Armour: Galvanised Round Steel Wires.7. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Yellow).
MULTI PAIR XLPE/PVC UNSHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-J-XFSWYu XLPE18 2 0.40 1.02 0.90 1.02 13.62
26502PKX-J-YaSWYu PVC 26804PKX-J-XFSWYu XLPE
18 4 0.40 1.02 0.90 1.27 15.40350
04PKX-J-YaSWYu PVC 35706PKX-J-XFSWYu XLPE
18 6 0.40 1.27 0.90 1.27 17.65460
06PKX-J-YaSWYu PVC 47108PKX-J-XFSWYu XLPE
18 8 0.40 1.27 1.25 1.27 19.70625
08PKX-J-YaSWYu PVC 64010PKX-J-XFSWYu XLPE
18 10 0.40 1.27 1.25 1.27 21.34720
10PKX-J-YaSWYu PVC 73812PKX-J-XFSWYu XLPE
18 12 0.40 1.27 1.25 1.27 21.82780
12PKX-J-YaSWYu PVC 80316PKX-J-XFSWYu XLPE
18 16 0.40 1.52 1.60 1.27 24.661053
16PKX-J-YaSWYu PVC 108324PKX-J-XFSWYu XLPE
18 24 0.40 1.52 1.60 1.27 28.541373
24PKX-J-YaSWYu PVC 141836PKX-J-XFSWYu XLPE
18 36 0.40 1.78 2.0 1.27 32.871954
36PKX-J-YaSWYu PVC 2021
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
12347 6 5
SINGLE PAIR, XLPE/PVC, SHIELDED, ARMOURED THERMOCOUPLE CABLES
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLES
![Page 44: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/44.jpg)
Page 43 Industrial Cables
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-H-XFSWYu XLPE16 2 0.40 1.02 0.90 1.27 15.04
32502PKX-H-YaSWYu PVC 32904PKX-H-XFSWYu XLPE
16 4 0.40 1.27 0.90 1.27 16.99447
04PKX-H-YaSWYu PVC 45606PKX-H-XFSWYu XLPE
16 6 0.40 1.27 1.25 1.27 19.68648
06PKX-H-YaSWYu PVC 66208PKX-H-XFSWYu XLPE
16 8 0.40 1.27 1.25 1.27 21.23762
08PKX-H-YaSWYu PVC 78010PKX-H-XFSWYu XLPE
16 10 0.40 1.52 1.25 1.27 23.64920
10PKX-H-YaSWYu PVC 94212PKX-H-XFSWYu XLPE
16 12 0.40 1.52 1.60 1.27 24.891118
12PKX-H-YaSWYu PVC 114516PKX-H-XFSWYu XLPE
16 16 0.40 1.52 1.60 1.27 26.741317
16PKX-H-YaSWYu PVC 135324PKX-H-XFSWYu XLPE
16 24 0.40 1.78 2.0 1.27 32.551972
24PKX-H-YaSWYu PVC 202536PKX-H-XFSWYu XLPE
16 36 0.40 1.78 2.0 1.27 35.972479
36PKX-H-YaSWYu PVC 255902PKX-I-XFSWYu XLPE
14 2 0.40 1.27 0.90 1.27 17.52444
02PKX-I-YaSWYu PVC 44804PKX-I-XFSWYu XLPE
14 4 0.40 1.27 1.25 1.27 20.05676
04PKX-I-YaSWYu PVC 69106PKX-I-XFSWYu XLPE
14 6 0.40 1.52 1.25 1.27 23.16894
06PKX-I-YaSWYu PVC 91708PKX-I-XFSWYu XLPE
14 8 0.40 1.52 1.60 1.27 25.851188
08PKX-I-YaSWYu PVC 121810PKX-I-XFSWYu XLPE
14 10 0.40 1.52 1.60 1.27 28.281389
10PKX-I-YaSWYu PVC 142612PKX-I-XFSWYu XLPE
14 12 0.40 1.52 1.60 1.27 28.981504
12PKX-I-YaSWYu PVC 154916PKX-I-XFSWYu XLPE
14 16 0.40 1.78 2.0 1.27 32.442025
16PKX-I-YaSWYu PVC 208524PKX-I-XFSWYu XLPE
14 24 0.40 1.78 2.0 1.27 38.452689
24PKX-I-YaSWYu PVC 277936PKX-I-XFSWYu XLPE
14 36 0.40 2.03 2.50 1.52 44.913928
36PKX-I-YaSWYu PVC 406302PKX-G-XFSWYu XLPE
12 2 0.40 1.27 1.25 1.27 19.60616
02PKX-G-YaSWYu PVC 62504PKX-G-XFSWYu XLPE
12 4 0.40 1.27 1.25 1.27 21.75826
04PKX-G-YaSWYu PVC 84406PKX-G-XFSWYu XLPE
12 6 0.40 1.52 1.60 1.27 25.931237
06PKX-G-YaSWYu PVC 126408PKX-G-XFSWYu XLPE 12 8 0.40 1.52 1.60 1.27 28.23 146508PKX-G-YaSWYu PVC 150110PKX-G-XFSWYu XLPE
12 10 0.40 1.78 2.0 1.27 32.381979
10PKX-G-YaSWYu PVC 202412PKX-G-XFSWYu XLPE
12 12 0.40 1.78 2.0 1.27 33.202152
12PKX-G-YaSWYu PVC 220616PKX-G-XFSWYu XLPE
12 16 0.40 1.78 2.0 1.27 35.952561
16PKX-G-YaSWYu PVC 263324PKX-G-XFSWYu XLPE
12 24 0.40 2.03 2.50 1.52 44.633895
24PKX-G-YaSWYu PVC 400336PKX-G-XFSWYu XLPE
12 36 0.40 2.03 2.50 1.52 49.735064
36PKX-G-YaSWYu PVC 5225
MULTI PAIR XLPE/PVC UNSHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For other types of thermocouple, simply replace “KX” to type required in Table 1. 2.) Other jacket materials are available upon request. 3.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
![Page 45: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/45.jpg)
Page 44Industrial Cables
1. Conductor: Thermocouple Extension conductor (see Table 1).
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
6. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
7. Armour: Galvanised Round Steel Wires.8. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Yellow).
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-J-XFOSSWYu XLPE18 2 0.40 1.02 0.90 1.02 13.98
27902PKX-J-YaOSSWYu PVC 28304PKX-J-XFOSSWYu XLPE
18 4 0.40 1.27 0.90 1.27 16.28395
04PKX-J-YaOSSWYu PVC 40206PKX-J-XFOSSWYu XLPE
18 6 0.40 1.27 0.90 1.27 18.01481
06PKX-J-YaOSSWYu PVC 49208PKX-J-XFOSSWYu XLPE
18 8 0.40 1.27 1.25 1.27 20.06646
08PKX-J-YaOSSWYu PVC 66110PKX-J-XFOSSWYu XLPE
18 10 0.40 1.27 1.25 1.27 21.70741
10PKX-J-YaOSSWYu PVC 75912PKX-J-XFOSSWYu XLPE
18 12 0.40 1.52 1.25 1.27 22.71833
12PKX-J-YaOSSWYu PVC 85516PKX-J-XFOSSWYu XLPE
18 16 0.40 1.52 1.60 1.27 25.051081
16PKX-J-YaOSSWYu PVC 111124PKX-J-XFOSSWYu XLPE
18 24 0.40 1.52 1.60 1.27 28.901403
24PKX-J-YaOSSWYu PVC 144836PKX-J-XFOSSWYu XLPE
18 36 0.40 1.78 2.0 1.27 33.231994
36PKX-J-YaOSSWYu PVC 2061
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
12368 5 47
MULTI PAIR, XLPE/PVC, UNSHIELDED, WITH OVERALL SHIELD, STEEL WIRE ARMOURED, THERMOCOUPLE CABLES
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLES
![Page 46: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/46.jpg)
Page 45 Industrial Cables
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-H-XFOSSWYu XLPE16 2 0.40 1.02 0.90 1.27 15.40
34002PKX-H-YaOSSWYu PVC 34404PKX-H-XFOSSWYu XLPE
16 4 0.40 1.27 0.90 1.27 17.35463
04PKX-H-YaOSSWYu PVC 47106PKX-H-XFOSSWYu XLPE
16 6 0.40 1.27 1.25 1.27 20.05670
06PKX-H-YaOSSWYu PVC 68308PKX-H-XFOSSWYu XLPE
16 8 0.40 1.27 1.25 1.27 21.59783
08PKX-H-YaOSSWYu PVC 80010PKX-H-XFOSSWYu XLPE
16 10 0.40 1.52 1.60 1.27 24.701068
10PKX-H-YaOSSWYu PVC 109012PKX-H-XFOSSWYu XLPE
16 12 0.40 1.52 1.60 1.27 25.251147
12PKX-H-YaOSSWYu PVC 117416PKX-H-XFOSSWYu XLPE
16 16 0.40 1.52 1.60 1.27 27.101331
16PKX-H-YaOSSWYu PVC 136624PKX-H-XFOSSWYu XLPE
16 24 0.40 1.78 2.0 1.27 32.911186
24PKX-H-YaOSSWYu PVC 204036PKX-H-XFOSSWYu XLPE
16 36 0.40 1.78 2.0 1.27 36.322519
36PKX-H-YaOSSWYu PVC 259802PKX-I-XFOSSWYu XLPE
14 2 0.40 1.27 0.90 1.27 17.88457
02PKX-I-YaOSSWYu PVC 46404PKX-I-XFOSSWYu XLPE
14 4 0.40 1.27 1.25 1.27 20.45696
04PKX-I-YaOSSWYu PVC 71106PKX-I-XFOSSWYu XLPE
14 6 0.40 1.52 1.25 1.27 23.52917
06PKX-I-YaOSSWYu PVC 93908PKX-I-XFOSSWYu XLPE
14 8 0.40 1.52 1.60 1.27 26.211201
08PKX-I-YaOSSWYu PVC 123110PKX-I-XFOSSWYu XLPE
14 10 0.40 1.52 1.60 1.27 28.641402
10PKX-I-YaOSSWYu PVC 144012PKX-I-XFOSSWYu XLPE
14 12 0.40 1.52 1.60 1.27 29.341533
12PKX-I-YaOSSWYu PVC 157816PKX-I-XFOSSWYu XLPE
14 16 0.40 1.78 2.0 1.27 33.052064
16PKX-I-YaOSSWYu PVC 212524PKX-I-XFOSSWYu XLPE
14 24 0.40 1.78 2.50 1.27 39.813014
24PKX-I-YaOSSWYu PVC 310536PKX-I-XFOSSWYu XLPE
14 36 0.40 2.03 2.50 1.52 45.273946
36PKX-I-YaOSSWYu PVC 408202PKX-G-XFOSSWYu XLPE
12 2 0.40 1.27 1.25 1.27 19.96637
02PKX-G-YaOSSWYu PVC 64604PKX-G-XFOSSWYu XLPE
12 4 0.40 1.52 1.25 1.27 22.63889
04PKX-G-YaOSSWYu PVC 90606PKX-G-XFOSSWYu XLPE
12 6 0.40 1.52 1.60 1.27 26.291265
06PKX-G-YaOSSWYu PVC 129208PKX-G-XFOSSWYu XLPE 12 8 0.40 1.52 1.60 1.27 28.59 149508PKX-G-YaOSSWYu PVC 153110PKX-G-XFOSSWYu XLPE
12 10 0.40 1.78 2.0 1.27 32.751994
10PKX-G-YaOSSWYu PVC 203912PKX-G-XFOSSWYu XLPE
12 12 0.40 1.78 2.0 1.27 33.562167
12PKX-G-YaOSSWYu PVC 222116PKX-G-XFOSSWYu XLPE
12 16 0.40 1.78 2.0 1.27 36.302601
16PKX-G-YaOSSWYu PVC 267324PKX-G-XFOSSWYu XLPE
12 24 0.40 2.03 2.50 1.52 39.523952
24PKX-G-YaOSSWYu PVC 406036PKX-G-XFOSSWYu XLPE
12 36 0.40 2.03 2.50 1.52 50.835083
36PKX-G-YaOSSWYu PVC 5245
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For other types of thermocouple, simply replace “KX” to type required in Table 1. 2.) Other jacket materials are available upon request. 3.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
![Page 47: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/47.jpg)
Page 46Industrial Cables
1. Conductor: Thermocouple Extension conductor (see Table 1).
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing: Uniformly twisted insulated
conductors with a suitable twist of lay.4. Individual Screening/Shield: Aluminium-
Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
8. Armour: Galvanised Round Steel Wires.9. Jacket: Heat Resistant Poly Vinyl Chloride
Flame Retardant Sunlight and Oil Resistant (Black).Sunlight and Oil Resistant (Yellow).
MULTI PAIR XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-J-XFISSWYu XLPE18 2 0.40 1.02 0.90 1.27 15.18
33202PKX-J-YaISSWYu PVC 33604PKX-J-XFISSWYu XLPE
18 4 0.40 1.27 0.90 1.27 17.09444
04PKX-J-YaISSWYu PVC 45206PKX-J-XFISSWYu XLPE
18 6 0.40 1.27 1.25 1.27 19.72639
06PKX-J-YaISSWYu PVC 65108PKX-J-XFISSWYu XLPE
18 8 0.40 1.27 1.25 1.27 21.21747
08PKX-J-YaISSWYu PVC 76310PKX-J-XFISSWYu XLPE
18 10 0.40 1.52 1.25 1.27 23.57899
10PKX-J-YaISSWYu PVC 91912PKX-J-XFISSWYu XLPE
18 12 0.40 1.52 1.60 1.27 24.801092
12PKX-J-YaISSWYu PVC 111616PKX-J-XFISSWYu XLPE
18 16 0.40 1.52 1.60 1.27 26.591264
16PKX-J-YaISSWYu PVC 129624PKX-J-XFISSWYu XLPE
18 24 0.40 1.78 2.0 1.27 32.251988
24PKX-J-YaISSWYu PVC 193536PKX-J-XFISSWYu XLPE
18 36 0.40 1.78 2.0 1.27 23.862386
36PKX-J-YaISSWYu PVC 2457
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
12349 6 578
MULTI PAIR, XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD, STEEL WIRE ARMOURED THERMOCOUPLE CABLES
UL 13 / UL 2250, PLTC / ITC, 90°C / 300VTHERMOCOUPLE CABLES
![Page 48: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/48.jpg)
Page 47 Industrial Cables
SCCItem Code
Insulation Material
Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PKX-H-XFISSWYu XLPE16 2 0.40 1.27 0.90 1.27 16.60
40202PKX-H-YaISSWYu PVC 40704PKX-H-XFISSWYu XLPE
16 4 0.40 1.27 0.90 1.27 18.2056
04PKX-H-YaISSWYu PVC 52606PKX-H-XFISSWYu XLPE
16 6 0.40 1.27 1.25 1.27 21.08755
06PKX-H-YaISSWYu PVC 76908PKX-H-XFISSWYu XLPE
16 8 0.40 1.52 1.25 1.27 23.30915
08PKX-H-YaISSWYu PVC 93410PKX-H-XFISSWYu XLPE
16 10 0.40 1.52 1.60 1.27 26.081191
10PKX-H-YaISSWYu PVC 121512PKX-H-XFISSWYu XLPE
16 12 0.40 1.52 1.60 1.27 26.681284
12PKX-H-YaISSWYu PVC 131316PKX-H-XFISSWYu XLPE
16 16 0.40 1.52 1.60 1.27 28.721516
16PKX-H-YaISSWYu PVC 155324PKX-H-XFISSWYu XLPE
16 24 0.40 1.78 2.0 1.27 34.952289
24PKX-H-YaISSWYu PVC 234636PKX-H-XFISSWYu XLPE
16 36 0.40 1.78 2.50 1.27 39.753199
36PKX-H-YaISSWYu PVC 328402PKX-I-XFISSWYu XLPE
14 2 0.40 1.27 0.90 1.27 17.75466
02PKX-I-YaISSWYu PVC 47204PKX-I-XFISSWYu XLPE
14 4 0.40 1.27 1.25 1.27 20.25716
04PKX-I-YaISSWYu PVC 72706PKX-I-XFISSWYu XLPE
14 6 0.40 1.52 1.25 1.27 23.30937
06PKX-I-YaISSWYu PVC 95408PKX-I-XFISSWYu XLPE
14 8 0.40 1.52 1.60 1.27 25.981242
08PKX-I-YaISSWYu PVC 126510PKX-I-XFISSWYu XLPE
14 10 0.40 1.52 1.60 1.27 28.361453
10PKX-I-YaISSWYu PVC 148112PKX-I-XFISSWYu XLPE
14 12 0.40 1.52 1.60 1.27 29.061580
12PKX-I-YaISSWYu PVC 161416PKX-I-XFISSWYu XLPE
14 16 0.40 1.78 2.0 1.27 32.762123
16PKX-I-YaISSWYu PVC 216824PKX-I-XFISSWYu XLPE
14 24 0.40 1.78 2.0 1.27 38.402830
24PKX-I-YaISSWYu PVC 289836PKX-I-XFISSWYu XLPE
14 36 0.40 2.03 2.50 1.52 44.804136
36PKX-I-YaISSWYu PVC 423702PKX-G-XFISSWYu XLPE
12 2 0.40 1.27 1.25 1.27 19.86646
02PKX-G-YaISSWYu PVC 65304PKX-G-XFISSWYu XLPE
12 4 0.40 1.27 1.25 1.27 21.98867
04PKX-G-YaISSWYu PVC 88006PKX-G-XFISSWYu XLPE
12 6 0.40 1.52 1.60 1.27 26.141279
06PKX-G-YaISSWYu PVC 129908PKX-G-XFISSWYu XLPE 12 8 0.40 1.52 1.60 1.27 28.40 153408PKX-G-YaISSWYu PVC 156110PKX-G-XFISSWYu XLPE
12 10 0.40 1.78 2.0 1.27 32.542042
10PKX-G-YaISSWYu PVC 207612PKX-G-XFISSWYu XLPE
12 12 0.40 1.78 2.0 1.27 33.342225
12PKX-G-YaISSWYu PVC 226616PKX-G-XFISSWYu XLPE
12 16 0.40 1.78 2.0 1.27 36.072656
16PKX-G-YaISSWYu PVC 271024PKX-G-XFISSWYu XLPE
12 24 0.40 2.03 2.50 1.52 44.694031
24PKX-G-YaISSWYu PVC 411336PKX-G-XFISSWYu XLPE
12 36 0.40 2.03 2.50 1.52 49.735262
36PKX-G-YaISSWYu PVC 5385
MULTI PAIR XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For other types of thermocouple, simply replace “KX” to type required in Table 1. 2.) Other jacket materials are available upon request. 3.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
![Page 49: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/49.jpg)
Page 48Industrial Cables
APPLICATION
• TC Power and Control Tray Cable are intended for use in accordance with Article 336 of NFPA 70, National Electrical Code. Recommended for indoor and outdoor installation in dry and wet locations, in cable racks and trays, in conduits and suitable for direct burial.
• For Transmission of analogue and digital signals in instrument and control systems; UL listed tray cable in compliance with NEC article 336, for use in hazardous classified locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources, e.g. public mains electricity supply.
ELECTRICAL PROPERTIES OF INSTRUMENTATION CABLES – TYPE TC – 600V
Conductor size (AWG) 12 14 16 18
Conductor Resistance @ 20°CPlain Cu
(Ω / km) max.5.63 8.95 14.25 22.80
Tinned Cu 5.83 9.3 14.9 23.6
Mutual Capacitance @ 1 KhzXLPE
(nF/km) max.≤150 ≤150 ≤150 ≤150
PVC ≤250 ≤250 ≤250 ≤250
L/R ratio µH/Ω max. ≤80 ≤60 ≤40 ≤25
Insulation ResistanceXLPE
MΩ – Km min. 30.50 30.50 30.50 30.50PVC
Test Voltage Core/Core (Urms)Core/shield (Urms)
XLPEV max.
3000 3000 3000 3000
PVC 2000 2000 2000 2000
PHYSICAL PROPERTIES
Flame Retardancy Passes UL 1685 vertical tray flame test & IEC 60332-3 Cat.A or C
Sunlight Resistance Passes UL-1581 test (720 hours)
Oil Resistance Passes UL-13 test (Oil I)
Minimum Bending Radius7.5 x Cable Outside Diameter (for unarmoured cables)10 x Cable Outside Diameter (for armoured cables)
Temperature Range (operation)During Operation: -30°C to +90°CDuring Installation: -5°C to +50°C
INSULATION AND JACKET COLOURS
Pair colour Black & White. Other pair colours are available upon request.
Triad colour Black, White and Red. Other triad colours are available upon request.
Jacket colour Orange. Other colours are available upon request.
Single & Multipair and Multi-Triple, individual and/or Collective screen, PVC- sheath
Common Cable Construction:Conductor Type– Plain Copper– Tinned Coated Copper
Insulation Material– XLPE 90°C– PVC 90°C
Unarmoured
Jackets– PVC Flame Retardant, Oil and Sunlight Resistant– Low Smoke Zero Halogen Free
UL 1277, TC, 90°C / 600V, SUNLIGHT & OIL RESISTANT, FLAME RETARDANT
UL 1277, TC, 90°C / 600VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 50: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/50.jpg)
Page 49 Industrial Cables
SINGLE PAIR XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS
SINGLE TRIAD XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01PC2-I-XFYu XLPE14 0.76 1.14 10.72
9801PC2-I-YaYu PVC 10501PC2-G-XFYu XLPE
12 0.76 1.14 11.66128
01PC2-G-YaYu PVC 135
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01TC2-I-XFOSYu XLPE14 0.76 1.14 11.26
12801TC2-I-YaOSYu PVC 13501TC2-G-XFOSYu XLPE
12 0.76 1.14 12.28171
01TC2-G-YaOSYu PVC 183
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted
insulated conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Yellow).
1234
SINGLE PAIR/TRIAD, XLPE/PVC, UNSHIELDED, UNARMOURED INSTRUMENTATION CABLE
UL 1277, TC, 90°C / 600VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 51: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/51.jpg)
Page 50Industrial Cables
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
SINGLE PAIR XLPE/PVC SHIELDED CABLE – DIMENSIONS AND WEIGHTS
SINGLE TRIAD XLPE/PVC SHIELDED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted
insulated conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Screening/Shielding: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Black).
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01PC2-I-XFOSYu XLPE14 0.76 1.14 11.08
10601PC2-I-YaOSYu PVC 11501PC2-G-XFOSYu XLPE
12 0.76 1.14 12.02137
01PC2-G-YaOSYu PVC 145
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01TC2-I-XFOSYu XLPE14 0.76 1.14 11.62
13601TC2-I-YaOSYu PVC 15001TC2-G-XFOSYu XLPE
12 0.76 1.14 12.64179
01TC2-G-YaOSYu PVC 195
12345
SINGLE PAIR/TRIAD, XLPE/PVC, SHIELDED UNARMOURED INSTRUMENTATION CABLE
UL 1277, TC, 90°C / 600VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 52: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/52.jpg)
Page 51 Industrial Cables
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Black).
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-I-XFYu XLPE14 2 0.76 1.52 15.85
17502PC2-I-YaYu PVC 20004PC2-I-XFYu XLPE
14 4 0.76 1.52 18.17291
04PC2-I-YaYu PVC 33506PC2-I-XFYu XLPE
14 6 0.76 1.52 21.39433
06PC2-I-YaYu PVC 49508PC2-I-XFYu XLPE
14 8 0.76 2.05 25.00553
08PC2-I-YaYu PVC 60010PC2-I-XFYu XLPE
14 10 0.76 2.05 28.05706
10PC2-I-YaYu PVC 79512PC2-I-XFYu XLPE
14 12 0.76 2.05 28.94815
12PC2-I-YaYu PVC 91016PC2-I-XFYu XLPE
14 16 0.76 2.05 31.931043
16PC2-I-YaYu PVC 117024PC2-I-XFYu XLPE
14 24 0.76 2.05 39.141552
24PC2-I-YaYu PVC 175036PC2-I-XFYu XLPE
14 36 0.76 2.80 46.252215
36PC2-I-YaYu PVC 249002PC2-G-XFYu XLPE
12 2 0.76 1.52 17.39234
02PC2-G-YaYu PVC 28004PC2-G-XFYu XLPE
12 4 0.76 1.52 20.04421
04PC2-G-YaYu PVC 48506PC2-G-XFYu XLPE
12 6 0.76 2.05 24.82598
06PC2-G-YaYu PVC 68008PC2-G-XFYu XLPE
12 8 0.76 2.05 27.66799
08PC2-G-YaYu PVC 90510PC2-G-XFYu XLPE
12 10 0.76 2.05 31.14979
10PC2-G-YaYu PVC 110512PC2-G-XFYu XLPE
12 12 0.76 2.05 32.151138
12PC2-G-YaYu PVC 126016PC2-G-XFYu XLPE
12 16 0.76 2.05 32.561507
16PC2-G-YaYu PVC 166024PC2-G-XFYu XLPE
12 24 0.76 2.05 43.762188
24PC2-G-YaYu PVC 240036PC2-G-XFYu XLPE
12 36 0.76 2.80 51.653212
36PC2-G-YaYu PVC 3500
MULTI PAIR XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
12345
MULTI PAIR/TRIAD, XLPE/PVC, UNSHIELDED, UNARMOURED INSTRUMENTATION CABLES
UL 1277, TC, 90°C / 600VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 53: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/53.jpg)
Page 52Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-I-XFYu XLPE14 2 0.76 1.52 17.46
26602TC2-I-YaYu PVC 30004TC2-I-XFYu XLPE
14 4 0.76 1.52 20.13446
04TC2-I-YaYu PVC 50006TC2-I-XFYu XLPE
14 6 0.76 2.05 24.93691
06TC2-I-YaYu PVC 78508TC2-I-XFYu XLPE
14 8 0.76 2.05 27.79879
08TC2-I-YaYu PVC 100010TC2-I-XFYu XLPE
14 10 0.76 2.05 31.281074
10TC2-I-YaYu PVC 122012TC2-I-XFYu XLPE
14 12 0.76 2.05 32.301244
12TC2-I-YaYu PVC 141016TC2-I-XFYu XLPE
14 16 0.76 2.05 35.731599
16TC2-I-YaYu PVC 181524TC2-I-XFYu XLPE
14 24 0.76 2.80 45.562476
24TC2-I-YaYu PVC 282036TC2-I-XFYu XLPE
14 36 0.76 2.80 51.913522
36TC2-I-YaYu PVC 400502TC2-G-XFYu XLPE 12 2 0.76 1.52 19.24 35402TC2-G-YaYu PVC 39504TC2-G-XFYu XLPE
12 4 0.76 1.52 22.28612
04TC2-G-YaYu PVC 68006TC2-G-XFYu XLPE
12 6 0.76 2.05 27.60942
06TC2-G-YaYu PVC 105508TC2-G-XFYu XLPE
12 8 0.76 2.05 30.851209
08TC2-G-YaYu PVC 135010TC2-G-XFYu XLPE
12 10 0.76 2.05 34.831484
10TC2-G-YaYu PVC 165512TC2-G-XFYu XLPE
12 12 0.76 2.05 35.991731
12TC2-G-YaYu PVC 193016TC2-G-XFYu XLPE
12 16 0.76 2.05 39.902239
16TC2-G-YaYu PVC 249524TC2-G-XFYu XLPE
12 24 0.76 2.80 50.883447
24TC2-G-YaYu PVC 384536TC2-G-XFYu XLPE
12 36 0.76 2.80 58.124955
36TC2-G-YaYu PVC 5520
MULTI TRIAD XLPE/PVC UNSHIELDED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
![Page 54: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/54.jpg)
Page 53 Industrial Cables
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
6. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Black).
12345 6
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-I-XFOSYu XLPE14 2 0.76 1.52 16.21 211
02PC2-I-YaOSYu PVC04PC2-I-XFOSYu XLPE
14 4 0.76 1.52 18.53 33504PC2-I-YaOSYu PVC06PC2-I-XFOSYu XLPE
14 6 0.76 1.52 21.75 46606PC2-I-YaOSYu PVC08PC2-I-XFOSYu XLPE
14 8 0.76 2.05 25.36 65108PC2-I-YaOSYu PVC10PC2-I-XFOSYu XLPE
14 10 0.76 2.05 28.41 78910PC2-I-YaOSYu PVC12PC2-I-XFOSYu XLPE
14 12 0.76 2.05 29.30 90512PC2-I-YaOSYu PVC16PC2-I-XFOSYu XLPE
14 16 0.76 2.05 32.29 114816PC2-I-YaOSYu PVC24PC2-I-XFOSYu XLPE
14 24 0.76 2.05 39.50 164924PC2-I-YaOSYu PVC36PC2-I-XFOSYu XLPE
14 36 0.76 2.80 46.61 250436PC2-I-YaOSYu PVC02PC2-G-XFOSYu XLPE
12 2 0.76 1.52 17.75 27202PC2-G-YaOSYu PVC04PC2-G-XFOSYu XLPE
12 4 0.76 1.52 20.40 44904PC2-G-YaOSYu PVC06PC2-G-XFOSYu XLPE
12 6 0.76 2.05 25.18 69206PC2-G-YaOSYu PVC08PC2-G-XFOSYu XLPE
12 8 0.76 2.05 28.02 87808PC2-G-YaOSYu PVC10PC2-G-XFOSYu XLPE
12 10 0.76 2.05 31.50 107010PC2-G-YaOSYu PVC12PC2-G-XFOSYu XLPE
12 12 0.76 2.05 32.51 123712PC2-G-YaOSYu PVC16PC2-G-XFOSYu XLPE
12 16 0.76 2.05 35.92 158516PC2-G-YaOSYu PVC24PC2-G-XFOSYu XLPE
12 24 0.76 2.05 44.12 229524PC2-G-YaOSYu PVC36PC2-G-XFOSYu XLPE
12 36 0.76 2.80 52.01 347836PC2-G-YaOSYu PVC
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
MULTI PAIR/TRIAD, XLPE/PVC, UNSHIELDED WITH OVERALL SHIELD, UNARMOURED INSTRUMENTATION CABLES
UL 1277, TC, 90°C / 600VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 55: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/55.jpg)
Page 54Industrial Cables
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-I-XFOSYu XLPE14 2 0.76 1.52 17.82 276
02TC2-I-YaOSYu PVC04TC2-I-XFOSYu XLPE
14 4 0.76 1.52 20.49 45704TC2-I-YaOSYu PVC06TC2-I-XFOSYu XLPE
14 6 0.76 2.05 25.29 70406TC2-I-YaOSYu PVC08TC2-I-XFOSYu XLPE
14 8 0.76 2.05 28.15 89308TC2-I-YaOSYu PVC10TC2-I-XFOSYu XLPE
14 10 0.76 2.05 31.64 108910TC2-I-YaOSYu PVC12TC2-I-XFOSYu XLPE
14 12 0.76 2.05 32.66 125912TC2-I-YaOSYu PVC16TC2-I-XFOSYu XLPE
14 16 0.76 2.05 36.09 161416TC2-I-YaOSYu PVC24TC2-I-XFOSYu XLPE
14 24 0.76 2.80 45.92 249524TC2-I-YaOSYu PVC36TC2-I-XFOSYu XLPE
14 36 0.76 2.80 52.27 354336TC2-I-YaOSYu PVC02TC2-G-XFOSYu XLPE
12 2 0.76 1.52 19.60 36502TC2-G-YaOSYu PVC04TC2-G-XFOSYu XLPE
12 4 0.76 1.52 22.64 62304TC2-G-YaOSYu PVC06TC2-G-XFOSYu XLPE
12 6 0.76 2.05 27.96 95006TC2-G-YaOSYu PVC08TC2-G-XFOSYu XLPE
12 8 0.76 2.05 31.21 122408TC2-G-YaOSYu PVC10TC2-G-XFOSYu XLPE
12 10 0.76 2.05 35.19 149910TC2-G-YaOSYu PVC12TC2-G-XFOSYu XLPE
12 12 0.76 2.05 36.35 174612TC2-G-YaOSYu PVC16TC2-G-XFOSYu XLPE
12 16 0.76 2.05 40.26 225616TC2-G-YaOSYu PVC24TC2-G-XFOSYu XLPE
12 24 0.76 2.80 21.24 346724TC2-G-YaOSYu PVC36TC2-G-XFOSYu XLPE
12 36 0.76 2.80 58.48 497736TC2-G-YaOSYu PVC
MULTI TRIAD XLPE/PVC UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/Triad counts are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard cutting length 1000m ± 5%. Other lengths are available upon request.
![Page 56: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/56.jpg)
Page 55 Industrial Cables
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC FR 90°C, XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Individual Screening/Shield : Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Jacket: Heat Resistant Poly Vinyl Chloride Flame Retardant Sunlight and Oil Resistant (Black).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-I-XFISYu XLPE14 2 0.76 1.52 16.86 232
02PC2-I-YaISYu PVC04PC2-I-XFISYu XLPE
14 4 0.76 1.52 19.33 37404PC2-I-YaISYu PVC06PC2-I-XFISYu XLPE
14 6 0.76 1.52 22.74 52306PC2-I-YaISYu PVC08PC2-I-XFISYu XLPE
14 8 0.76 2.05 26.50 72808PC2-I-YaISYu PVC10PC2-I-XFISYu XLPE
14 10 0.76 2.05 29.73 88410PC2-I-YaISYu PVC12PC2-I-XFISYu XLPE
14 12 0.76 2.05 30.67 101712PC2-I-YaISYu PVC16PC2-I-XFISYu XLPE
14 16 0.76 2.05 33.84 129516PC2-I-YaISYu PVC24PC2-I-XFISYu XLPE
14 24 0.76 2.05 41.47 186524PC2-I-YaISYu PVC36PC2-I-XFISYu XLPE
14 36 0.76 2.80 48.92 283036PC2-I-YaISYu PVC02PC2-G-XFISYu XLPE
12 2 0.76 1.52 18.44 29502PC2-G-YaISYu PVC04PC2-G-XFISYu XLPE
12 4 0.76 1.52 21.24 49104PC2-G-YaISYu PVC06PC2-G-XFISYu XLPE
12 6 0.76 2.05 26.23 75606PC2-G-YaISYu PVC08PC2-G-XFISYu XLPE
12 8 0.76 2.05 29.22 96008PC2-G-YaISYu PVC10PC2-G-XFISYu XLPE
12 10 0.76 2.05 32.89 117210PC2-G-YaISYu PVC12PC2-G-XFISYu XLPE
12 12 0.76 2.05 33.95 135712PC2-G-YaISYu PVC16PC2-G-XFISYu XLPE
12 16 0.76 2.05 37.55 174216PC2-G-YaISYu PVC24PC2-G-XFISYu XLPE
12 24 0.76 2.80 47.78 269024PC2-G-YaISYu PVC36PC2-G-XFISYu XLPE
12 36 0.76 2.80 54.44 382836PC2-G-YaISYu PVC
MULTI PAIR XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
12356 47
MULTI PAIR/TRIAD, XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD, UNARMOURED INSTRUMENTATION CABLES
UL 1277, TC, 90°C / 600VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 57: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/57.jpg)
Page 56Industrial Cables
SCCItem Code
Insulation Material Type
Conductor size
(AWG)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-I-XFISYu XLPE14 2 0.76 1.52 19.28 304
02TC2-I-YaISYu PVC04TC2-I-XFISYu XLPE
14 4 0.76 1.52 22.25 50304TC2-I-YaISYu PVC06TC2-I-XFISYu XLPE
14 6 0.76 2.05 27.48 75506TC2-I-YaISYu PVC08TC2-I-XFISYu XLPE
14 8 0.76 2.05 30.66 95408TC2-I-YaISYu PVC10TC2-I-XFISYu XLPE
14 10 0.76 2.05 34.56 120010TC2-I-YaISYu PVC12TC2-I-XFISYu XLPE
14 12 0.76 2.05 35.69 138812TC2-I-YaISYu PVC16TC2-I-XFISYu XLPE
14 16 0.76 2.05 39.51 178016TC2-I-YaISYu PVC24TC2-I-XFISYu XLPE 14 24 0.76 2.80 50.28 275124TC2-I-YaISYu PVC36TC2-I-XFISYu XLPE
14 36 0.76 2.80 57.36 390736TC2-I-YaISYu PVC02TC2-G-XFISYu XLPE
12 2 0.76 1.52 21.20 39502TC2-G-YaISYu PVC04TC2-G-XFISYu XLPE
12 4 0.76 2.05 25.69 73304TC2-G-YaISYu PVC06TC2-G-XFISYu XLPE
12 6 0.76 2.05 30.35 103306TC2-G-YaISYu PVC08TC2-G-XFISYu XLPE
12 8 0.76 2.05 33.97 132208TC2-G-YaISYu PVC10TC2-G-XFISYu XLPE
12 10 0.76 2.05 38.39 162010TC2-G-YaISYu PVC12TC2-G-XFISYu XLPE
12 12 0.76 2.05 39.68 188512TC2-G-YaISYu PVC16TC2-G-XFISYu XLPE
12 16 0.76 2.05 44.02 243516TC2-G-YaISYu PVC24TC2-G-XFISYu XLPE
12 24 0.76 2.80 56.04 374424TC2-G-YaISYu PVC36TC2-G-XFISYu XLPE
12 36 0.76 2.80 64.08 537036TC2-G-YaISYu PVC
MULTI TRIAD XLPE/PVC WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/Triad counts are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard Cutting length 1000m ± 5%, other lengths are on request.
![Page 58: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/58.jpg)
Page 57 Industrial Cables
A P P L I C A T I O N
• These cables are used in Petrochemical Industries and other process that requires control signals for the transmission of analog and digitals signals to link all the hardware in the networks.
Single & Multipair and Multi-Triple, individual and /or Collective screen, PVC- sheath
Cable Features:Unarmoured
Armoured
Lead Sheathed or Multi-layer Sheathed
Common Cable Construction:Conductor Type– Plain Copper– Tinned Coated Copper
Insulation Material– XLPE 90°C– PVC 90°C
Lead Sheathed or Multi-Layer Sheathed
Armoured– Galvanised Steel Wires– Double Steel Tape
Jackets– PVC Flame Retardant, Oil and Sunlight Resistant– Low Smoke Zero Halogen Free
ELECTRICAL PROPERTIES OF INSTRUMENTATION CABLES – 500V
Conductor area size (mm²) 0.5 0.75 1.0 1.5 2.5
Conductor Resistance @ 20°CPlain Cu
(Ω / km) max.≤36.00 ≤24.50 ≤18.10 ≤12.10 ≤7.41
Tinned Cu ≤36.70 ≤24.80 ≤18.20 ≤12.20 ≤7.56
Mutual Capacitance @ 1 KhzXLPE
(nF/km) max.≤150 ≤150 ≤150 ≤150 ≤150
PVC ≤250 ≤250 ≤250 ≤250 ≤250
L/R ratio µH/Ω max. ≤25 ≤25 ≤25 ≤40 ≤60
Insulation ResistanceXLPE
MΩ – Kmmin. ≥1000 ≥1000 ≥1000 ≥1000 ≥1000
PVC min. ≥10 ≥10 ≥10 ≥10 ≥10
Test Voltage Core/Core (Urms)Core/shield (Urms)
XLPEV min.
≥2000 ≥2000 ≥2000 ≥2000 ≥2000
PVC ≥2000 ≥2000 ≥2000 ≥2000 ≥2000
PHYSICAL PROPERTIES
Flame Retardancy Passes UL 1685 vertical tray flame test & IEC 60332-3 Cat. A or C
Sunlight Resistance Passes UL-1581 test (720 hours)
Oil Resistance Passes UL-13 test (Oil I)/ICEA S-732-532
Minimum Bending Radius7.5 x Cable Outside Diameter (for unarmoured cables)10 x Cable Outside Diameter (for armoured cables)
Temperature RangeDuring Operation: -30°C to +90°CDuring Installation: -5°C to +50°C
INSULATION AND JACKET COLOURS
Pair colour Black & White. Other pair colours are available upon request.
Triad colour Black, White and Red. Other triad colours are available upon request.
Jacket colour Black. Other colours are available upon request.
EN 50288-7, 500V, CROSS LINKED POLYETHYLENE INSULATED CABLES (XLPE 90°C) AND (PVC 90°C) INSULATED CABLES
EN 50288-7, 90°C / 500VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 59: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/59.jpg)
Page 58Industrial Cables
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC 90°C, XLPE 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Individual Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Jacket: Poly Vinyl Chloride Flame Retardant (Black).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
SINGLE PAIR XLPE/PVC SHIELDED CABLE – DIMENSIONS AND WEIGHTS
SINGLE TRIAD XLPE/PVC SHIELDED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material Type
Conductor area size (mm2)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/
km)01PC2-A-2XOSYu XLPE
0.50.50
0.807.45 43
01PC2-A-YaOSYu PVC 0.60 7.85 5001PC2-B-2XOSYu XLPE
0.75 0.60 0.80 8.2554
01PC2-B-YaOSYu PVC 5801PC2-C-2XOSYu XLPE
1.0 0.60 0.80 8.6061
01PC2-C-YaOSYu PVC 6501PC2-D-XFOSYu XLPE
1.5 0.60 0.80 9.1573
01PC2-D-YaOSYu PVC 7801PC2-E-XFOSYu XLPE
2.5 0.70 0.90 10.25101
01PC2-E-YaOSYu PVC 107
SCCItem Code
Insulation Material Type
Conductor size (mm2)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/
km)01TC2-A-2XOSYu XLPE
0.50.50
0.807.75 51
01TC2-A-YaOSYu PVC 0.60 8.20 6101TC2-B-2XOSYu XLPE
0.75 0.60 0.80 8.6566
01TC2-B-YaOSYu PVC 7201TC2-C-2XOSYu XLPE
1.0 0.60 0.80 9.0076
01TC2-C-YaOSYu PVC 8201TC2-D-2XOSYu XLPE
1.5 0.60 0.80 9.6094
01TC2-D-YaOSYu PVC 10101TC2-E-2XOSYu XLPE
2.5 0.70 0.80 10.75132
01TC2-E-YaOSYu PVC 141
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/triad counts are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
12345
SINGLE PAIR/TRIAD SHIELDED, UNARMOURED INSTRUMENTATION CABLE
EN 50288-7, 90°C / 500VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 60: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/60.jpg)
Page 59 Industrial Cables
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC 90°C, XLPE 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay, applied with polyester wrapping tape.
4. Individual Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
6. Armour: Galvanised Round Steel Wires.7. Jacket: Poly Vinyl Chloride Flame Retardant
(Black).
SINGLE PAIR SHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SINGLE TRIAD SHIELDED – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/triad counts are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
SCCItem Code
Insulation Material
Type
Conductor area size
(mm2)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01PC2-A-2XOSSWYu XLPE0.5
0.500.80 0.90 1.30
12.00 21101PC2-A-YaOSSWYu PVC 0.60 12.40 23101PC2-B-2XOSSWYu XLPE
0.75 0.60 0.80 0.90 1.30 12.80243
01PC2-B-YaOSSWYu PVC 24701PC2-C-2XOSSWYu XLPE
1.0 0.60 0.80 0.90 1.30 13.15257
01PC2-C-YaOSSWYu PVC 26201PC2-D-2XOSSWYu XLPE
1.5 0.60 0.80 0.90 1.40 13.90292
01PC2-D-YaOSSWYu PVC 29701PC2-E-2XOSSWYu XLPE
2.5 0.60 0.90 0.90 1.50 15.20356
01PC2-E-YaOSSWYu PVC 362
SCCItem Code
Insulation Material
Type
Conductor area size (mm2)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
01TC2-A-2XOSSWYu XLPE0.5
0.500.80 0.90 1.30
12.30 22701TC2-A-YaOSSWYu PVC 0.60 12.70 24901TC2-B-2XOSSWYu XLPE
0.75 0.60 0.80 0.90 1.30 13.15263
01TC2-B-YaOSSWYu PVC 26901TC2-C-2XOSSWYu XLPE
1.0 0.60 0.80 0.90 1.30 13.55286
01TC2-C-YaOSSWYu PVC 29701TC2-D-2XOSSWYu XLPE
1.5 0.60 0.80 0.90 1.40 14.35325
01TC2-D-YaOSSWYu PVC 33301TC2-E-2XOSSWYu XLPE
2.5 0.60 0.90 0.90 1.50 15.70401
01TC2-E-YaOSSWYu PVC 410
12367 5 4
SINGLE PAIR/TRIAD SHIELDED, STEEL WIRE ARMOURED INSTRUMENTATION CABLE
EN 50288-7, 90°C / 500VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 61: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/61.jpg)
Page 60Industrial Cables
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
6. Jacket: Poly Vinyl Chloride Flame Retardant (Black).
SCCItem Code
Insulation Material Type
Conductor area size (mm2)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-A-2XOSYu XLPE0.5 2
0.500.80
9.90 6902PC2-A-YaOSYu PVC 0.60 10.55 8104PC2-A-2XOSYu XLPE
0.5 40.50
1.1011.85 120
04PC2-A-YaOSYu PVC 0.60 12.65 14408PC2-A-2XOSYu XLPE
0.5 80.50
1.2015.30 204
08PC2-A-YaOSYu PVC 0.60 16.45 25110PC2-A-2XOSYu XLPE
0.5 100.50
1.2017.05 245
10PC2-A-YaOSYu PVC 0.60 18.35 30212PC2-A-2XOSYu XLPE
0.5 120.50
1.2017.55 276
12PC2-A-YaOSYu PVC 0.60 18.90 34424PC2-A-2XOSYu XLPE
0.5 240.50
1.3023.55 497
24PC2-A-YaOSYu PVC 0.60 25.50 62836PC2-A-2XOSYu XLPE
0.5 360.50
1.3026.70 688
36PC2-A-YaOSYu PVC 0.60 29.00 88002PC2-B-2XOSYu XLPE
0.75 2 0.60 0.80 11.2589
02PC2-B-YaOSYu PVC 9704PC2-B-2XOSYu XLPE
0.75 4 0.60 1.20 13.70165
04PC2-B-YaOSYu PVC 18108PC2-B-2XOSYu XLPE
0.75 8 0.60 1.20 17.65276
08PC2-B-YaOSYu PVC 30810PC2-B-2XOSYu XLPE
0.75 10 0.60 1.20 19.75333
10PC2-B-YaOSYu PVC 37212PC2-B-2XOSYu XLPE
0.75 12 0.60 1.20 20.35372
12PC2-B-YaOSYu PVC 42624PC2-B-2XOSYu XLPE
0.75 24 0.60 1.50 28.00724
24PC2-B-YaOSYu PVC 81736PC2-B-2XOSYu XLPE
0.75 36 0.60 1.50 31.851008
36PC2-B-YaOSYu PVC 114802PC2-C-2XOSYu XLPE
1.0 2 0.60 0.80 11.80103
02PC2-C-YaOSYu PVC 11104PC2-C-2XOSYu XLPE
1.0 4 0.60 1.20 14.35192
04PC2-C-YaOSYu PVC 20908PC2-C-2XOSYu XLPE
1.0 8 0.60 1.20 18.60327
08PC2-C-YaOSYu PVC 36110PC2-C-2XOSYu XLPE
1.0 10 0.60 1.20 20.85396
10PC2-C-YaOSYu PVC 43912PC2-C-2XOSYu XLPE
1.0 12 0.60 1.20 21.50453
12PC2-C-YaOSYu PVC 50524PC2-C-XOSYu XLPE
1.0 24 0.60 1.50 29.65870
24PC2-C-YaOSYu PVC 97336PC2-C-XFOSYu XLPE
1.0 36 0.60 1.50 33.751222
36PC2-C-YaOSYu PVC 1377
12345 6
MULTI TWISTED PAIR/TRIAD, UNSHIELDED WITH OVERALL SHIELD, UNARMOURED INSTRUMENTATION CABLES
EN 50288-7, 90°C / 500VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 62: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/62.jpg)
Page 61 Industrial Cables
MULTI TRIAD UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
MULTI PAIR XLPE/PVC UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material Type
Conductor area size (mm2)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-A-2XOSYu XLPE0.5 2
0.500.80
10.80 8702TC2-A-YaOSYu PVC 0.60 11.55 10504TC2-A-2XOSYu XLPE
0.5 40.50
1.1012.95 155
04TC2-A-YaOSYu PVC 0.60 13.85 19008TC2-A-2XOSYu XLPE
0.5 80.50
1.2016.90 271
08TC2-A-YaOSYu PVC 0.60 18.20 33810TC2-A-2XOSYu XLPE
0.5 100.50
1.2018.90 327
10TC2-A-YaOSYu PVC 0.60 20.40 41012TC2-A-2XOSYu XLPE
0.5 120.50
1.2019.45 373
12TC2-A-YaOSYu PVC 0.60 21.00 47124TC2-A-2XOSYu XLPE
0.5 240.50
1.3026.30 685
24TC2-A-YaOSYu PVC 0.60 28.55 87636TC2-A-2XOSYu XLPE
0.5 360.50
1.3029.90 964
36TC2-A-YaOSYu PVC 0.60 32.55 124502TC2-B-2XOSYu XLPE
0.75 2 0.60 0.80 12.35115
02TC2-B-YaOSYu PVC 12704TC2-B-2XOSYu XLPE
0.75 4 0.60 1.20 15.05216
04TC2-B-YaOSYu PVC 24008TC2-B-2XOSYu XLPE
0.75 8 0.60 1.20 19.55374
08TC2-B-YaOSYu PVC 42010TC2-B-2XOSYu XLPE
0.75 10 0.60 1.20 21.95453
10TC2-B-YaOSYu PVC 51212TC2-B-2XOSYu XLPE
0.75 12 0.60 1.20 22.65521
12TC2-B-YaOSYu PVC 59124TC2-B-2XOSYu XLPE
0.75 24 0.60 1.50 31.351003
24TC2-B-YaOSYu PVC 114436TC2-B-2XOSYu XLPE
0.75 36 0.60 1.50 35.701418
36TC2-B-YaOSYu PVC 1629
SCCItem Code
Insulation Material Type
Conductor area size (mm2)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-D-XFOSYu XLPE1.5 2 0.60 0.90 12.95
13402PC2-D-YaOSYu PVC 14404PC2-D-XFOSYu XLPE
1.5 4 0.60 1.20 15.45240
04PC2-D-YaOSYu PVC 26008PC2-D-XFOSYu XLPE
1.5 8 0.60 1.30 20.40430
08PC2-D-YaOSYu PVC 47010PC2-D-XFOSYu XLPE
1.5 10 0.60 1.30 22.90522
10PC2-D-YaOSYu PVC 57212PC2-D-XFOSYu XLPE
1.5 12 0.60 1.30 23.65601
12PC2-D-YaOSYu PVC 66024PC2-D-XFOSYu XLPE
1.5 24 0.60 1.50 32.451138
24PC2-D-YaOSYu PVC 125636PC2-D-XFOSYu XLPE
1.5 36 0.60 1.70 37.401657
36PC2-D-YaOSYu PVC 183402PC2-E-XFOSYu XLPE
2.5 2 0.70 1.0 14.55187
02PC2-E-YaOSYu PVC 19904PC2-E-XFOSYu XLPE
2.5 4 0.70 1.30 17.40337
04PC2-E-YaOSYu PVC 36108PC2-E-XFOSYu XLPE
2.5 8 0.70 1.40 23.00613
08PC2-E-YaOSYu PVC 66010PC2-E-XFOSYu XLPE
2.5 10 0.70 1.40 25.90747
10PC2-E-YaOSYu PVC 80712PC2-E-XFOSYu XLPE
2.5 12 0.70 1.40 26.75865
12PC2-E-YaOSYu PVC 93624PC2-E-XFOSYu XLPE
2.5 24 0.70 1.60 36.851651
24PC2-E-YaOSYu PVC 179336PC2-E-XFOSYu XLPE
2.5 36 0.70 1.80 42.552412
36PC2-E-YaOSYu PVC 2625
![Page 63: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/63.jpg)
Page 62Industrial Cables
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
MULTI TRIAD UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material Type
Conductor area size (mm2)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-A-2XOSYu XLPE1.0 2 0.60 0.80 11.80
10302PC2-A-YaOSYu PVC 11104PC2-A-2XOSYu XLPE
1.0 4 0.60 1.20 14.35192
04PC2-A-YaOSYu PVC 20908PC2-A-2XOSYu XLPE
1.0 8 0.60 1.20 18.60327
08PC2-A-YaOSYu PVC 36110PC2-A-2XOSYu XLPE
1.0 10 0.60 1.20 20.85396
10PC2-A-YaOSYu PVC 43912PC2-A-2XOSYu XLPE
1.0 12 0.60 1.20 21.50453
12PC2-A-YaOSYu PVC 50524PC2-A-2XOSYu XLPE
1.0 24 0.60 1.50 29.65870
24PC2-A-YaOSYu PVC 97336PC2-A-2XOSYu XLPE
1.0 36 0.60 1.50 33.751222
36PC2-A-YaOSYu PVC 137702PC2-B-2XOSYu XLPE
1.5 2 0.60 0.90 12.95134
02PC2-B-YaOSYu PVC 14404PC2-B-2XOSYu XLPE
1.5 4 0.60 1.20 15.45240
04PC2-B-YaOSYu PVC 26008PC2-B-2XOSYu XLPE
1.5 8 0.60 1.30 20.40430
08PC2-B-YaOSYu PVC 47010PC2-B-2XOSYu XLPE
1.5 10 0.60 1.30 22.90522
10PC2-B-YaOSYu PVC 57212PC2-B-2XOSYu XLPE
1.5 12 0.60 1.30 23.65601
12PC2-B-YaOSYu PVC 66024PC2-B-2XOSYu XLPE
1.5 24 0.60 1.50 32.451138
24PC2-B-YaOSYu PVC 125636PC2-B-2XOSYu XLPE
1.5 36 0.60 1.70 37.401657
36PC2-B-YaOSYu PVC 183402PC2-C-2XOSYu XLPE
2.5 2 0.70 1.0 14.55187
02PC2-C-YaOSYu PVC 19904PC2-C-2XOSYu XLPE
2.5 4 0.70 1.30 17.40337
04PC2-C-YaOSYu PVC 36108PC2-C-2XOSYu XLPE
2.5 8 0.70 1.40 23.00613
08PC2-C-YaOSYu PVC 66010PC2-C-2XOSYu XLPE
2.5 10 0.70 1.40 25.90747
10PC2-C-YaOSYu PVC 80712PC2-C-2XOSYu XLPE
2.5 12 0.70 1.40 26.75865
12PC2-C-YaOSYu PVC 93624PC2-C-XOSYu XLPE
2.5 24 0.70 1.60 36.851651
24PC2-C-YaOSYu PVC 179336PC2-C-XFOSYu XLPE
2.5 36 0.70 1.80 42.552412
36PC2-C-YaOSYu PVC 2625
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/triad counts are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
![Page 64: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/64.jpg)
Page 63 Industrial Cables
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC 90°C, XLPE 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Individual Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Jacket: Poly Vinyl Chloride Flame Retardant (Black).
MULTI PAIR WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material Type
Conductor area size (mm2)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-A-2XISYu XLPE0.5 2
0.500.90
10.65 9002PC2-A-YaISYu PVC 0.60 11.35 10304PC2-A-2XISYu XLPE
0.5 40.50
1.2012.75 158
04PC2-A-YaISYu PVC 0.60 13.55 18308PC2-A-2XISYu XLPE
0.5 80.50
1.2016.25 267
08PC2-A-YaISYu PVC 0.60 17.40 31310PC2-A-2XISYu XLPE
0.5 100.50
1.2018.10 322
10PC2-A-YaISYu PVC 0.60 19.45 37912PC2-A-2XISYu XLPE
0.5 120.50
1.2018.65 367
12PC2-A-YaISYu PVC 0.60 20.05 43524PC2-A-2XISYu XLPE
0.5 240.50
1.3025.15 676
24PC2-A-YaISYu PVC 0.60 27.20 80736PC2-A-2XISYu XLPE
0.5 360.50
1.5029.00 983
36PC2-A-YaISYu PVC 0.60 31.35 117702PC2-B-2XISYu XLPE
0.75 2 0.60 1.10 12.45125
02PC2-B-YaISYu PVC 13304PC2-B-2XISYu XLPE
0.75 4 0.60 1.20 14.40200
04PC2-B-YaISYu PVC 21608PC2-B-2XISYu XLPE
0.75 8 0.60 1.30 18.80353
08PC2-B-YaISYu PVC 38510PC2-B-2XISYu XLPE
0.75 10 0.60 1.30 21.05428
10PC2-B-YaISYu PVC 46712PC2-B-2XISYu XLPE
0.75 12 0.60 1.30 21.75490
12PC2-B-YaISYu PVC 53624PC2-B-2XISYu XLPE
0.75 24 0.60 1.70 30.15952
24PC2-B-YaISYu PVC 104536PC2-B-2XISYu XLPE
0.75 36 0.60 2.00 34.901389
36PC2-B-YaISYu PVC 153002PC2-C-2XISYu XLPE
1.0 2 0.60 1.10 13.05140
02PC2-C-YaISYu PVC 14804PC2-C-2XISYu XLPE
1.0 4 0.60 1.20 15.05227
04PC2-C-YaISYu PVC 24408PC2-C-2XISYu XLPE
1.0 8 0.60 1.30 19.80405
08PC2-C-YaISYu PVC 43910PC2-C-2XISYu XLPE
1.0 10 0.60 1.30 22.25491
10PC2-C-YaISYu PVC 53412PC2-C-2XISYu XLPE
1.0 12 0.60 1.30 22.95564
12PC2-C-YaISYu PVC 61624PC2-C-2XISYu XLPE
1.0 24 0.60 1.70 31.851101
24PC2-C-YaISYu PVC 120336PC2-C-2XISYu XLPE
1.0 36 0.60 2.00 36.901610
36PC2-C-YaISYu PVC 1764
12356 47
MULTI TWISTED PAIR/TRIAD WITH INDIVIDUAL AND OVERALL SHIELD, UNARMOURED INSTRUMENTATION CABLE
EN 50288-7, 90°C / 500VSUNLIGHT & OIL RESISTANT,FLAME RETARDANT
![Page 65: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/65.jpg)
Page 64Industrial Cables
MULTI PAIR WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material Type
Conductor area size (mm2)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-D-2XISYu XLPE1.5 2 0.60 1.20 14.15
17302PC2-D-YaISYu PVC 18304PC2-D-2XISYu XLPE
1.5 4 0.60 1.30 16.45284
04PC2-D-YaISYu PVC 30408PC2-D-2XISYu XLPE
1.5 8 0.60 1.50 21.85521
08PC2-D-YaISYu PVC 56110PC2-D-2XISYu XLPE
1.5 10 0.60 1.50 24.55633
10PC2-D-YaISYu PVC 68212PC2-D-2XISYu XLPE
1.5 12 0.60 1.50 25.30728
12PC2-D-YaISYu PVC 78724PC2-D-2XISYu XLPE
1.5 24 0.60 1.70 34.701372
24PC2-D-YaISYu PVC 149136PC2-D-2XISYu XLPE
1.5 36 0.60 2.00 40.152014
36PC2-D-YaISYu PVC 219202PC2-E-2XISYu XLPE
2.5 2 0.60 1.30 15.85230
02PC2-E-YaISYu PVC 24204PC2-E-2XISYu XLPE
2.5 4 0.60 1.40 18.40385
04PC2-E-YaISYu PVC 40908PC2-E-2XISYu XLPE
2.5 8 0.60 1.60 24.55713
08PC2-E-YaISYu PVC 76010PC2-E-2XISYu XLPE
2.5 10 0.60 1.60 27.65869
10PC2-E-YaISYu PVC 92812PC2-E-2XISYu XLPE
2.5 12 0.60 1.60 28.551005
12PC2-E-YaISYu PVC 107524PC2-E-2XISYu XLPE
2.5 24 0.60 1.80 39.251907
24PC2-E-YaISYu PVC 204936PC2-E-2XISYu XLPE
2.5 36 0.60 2.10 45.452803
36PC2-E-YaISYu PVC 3016
MULTI TRIAD WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material Type
Conductor area size (mm2)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-A-2XISYu XLPE0.5 2
0.500.90
12.05 11202TC2-A-YaISYu PVC 0.60 12.85 13204TC2-A-2XISYu XLPE
0.5 40.50
1.2014.40 198
04TC2-A-YaISYu PVC 0.60 15.40 23608TC2-A-2XISYu XLPE
0.5 80.50
1.2018.65 339
08TC2-A-YaISYu PVC 0.60 20.05 41210TC2-A-2XISYu XLPE
0.5 100.50
1.2020.90 411
10TC2-A-YaISYu PVC 0.60 22.55 50112TC2-A-2XISYu XLPE
0.5 120.50
1.2021.55 472
12TC2-A-YaISYu PVC 0.60 23.25 57824TC2-A-2XISYu XLPE
0.5 240.50
1.3029.35 875
24TC2-A-YaISYu PVC 0.60 31.80 108236TC2-A-2XISYu XLPE
0.5 360.50
1.5033.90 1277
36TC2-A-YaISYu PVC 0.60 36.75 158502TC2-B-2XISYu XLPE
0.75 2 0.60 1.10 14.10156
02TC2-B-YaISYu PVC 16804TC2-B-2XISYu XLPE
0.75 4 0.60 1.20 16.40256
04TC2-B-YaISYu PVC 28008TC2-B-2XISYu XLPE
0.75 8 0.60 1.30 21.70459
08TC2-B-YaISYu PVC 50610TC2-B-2XISYu XLPE
0.75 10 0.60 1.30 24.45558
10TC2-B-YaISYu PVC 61612TC2-B-2XISYu XLPE
0.75 12 0.60 1.30 25.25642
12TC2-B-YaISYu PVC 71224TC2-B-2XISYu XLPE
0.75 24 0.60 1.70 35.151252
24TC2-B-YaISYu PVC 139336TC2-B-2XISYu XLPE
0.75 36 0.60 2.00 40.751833
36TC2-B-YaISYu PVC 2044
![Page 66: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/66.jpg)
Page 65 Industrial Cables
MULTI TRIAD UNSHIELDED WITH OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material Type
Conductor area size (mm2)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-C-2XISYu XLPE1.0 2 0.60 1.10 14.85
17802TC2-C-YaISYu PVC 19004TC2-C-2XISYu XLPE
1.0 4 0.60 1.20 17.25295
04TC2-C-YaISYu PVC 32108TC2-C-2XISYu XLPE
1.0 8 0.60 1.30 22.90534
08TC2-C-YaISYu PVC 58610TC2-C-2XISYu XLPE
1.0 10 0.60 1.30 25.85651
10TC2-C-YaISYu PVC 71512TC2-C-2XISYu XLPE
1.0 12 0.60 1.30 26.65751
12TC2-C-YaISYu PVC 82924TC2-C-2XISYu XLPE
1.0 24 0.60 1.70 37.251470
24TC2-C-YaISYu PVC 162536TC2-C-2XISYu XLPE
1.0 36 0.60 2.00 43.152157
36TC2-C-YaISYu PVC 238902TC2-D-2XISYu XLPE
1.5 2 0.60 1.20 16.15224
02TC2-D-YaISYu PVC 23804TC2-D-2XISYu XLPE
1.5 4 0.60 1.30 18.85375
04TC2-D-YaISYu PVC 40508TC2-D-2XISYu XLPE
1.5 8 0.60 1.50 25.30697
08TC2-D-YaISYu PVC 75710TC2-D-2XISYu XLPE
1.5 10 0.60 1.50 28.50850
10TC2-D-YaISYu PVC 92412TC2-D-2XISYu XLPE
1.5 12 0.60 1.50 29.45983
12TC2-D-YaISYu PVC 107224TC2-D-2XISYu XLPE
1.5 24 0.60 1.70 40.651870
24TC2-D-YaISYu PVC 204736TC2-D-2XISYu XLPE
1.5 36 0.60 2.00 47.152752
36TC2-D-YaISYu PVC 301802TC2-E-2XISYu XLPE
2.5 2 0.60 1.30 18.10303
02TC2-E-YaISYu PVC 32104TC2-E-2XISYu XLPE
2.5 4 0.60 1.40 21.15519
04TC2-E-YaISYu PVC 55908TC2-E-2XISYu XLPE
2.5 8 0.60 1.60 28.50972
08TC2-E-YaISYu PVC 104310TC2-E-2XISYu XLPE
2.5 10 0.60 1.60 32.201189
10TC2-E-YaISYu PVC 127812TC2-E-2XISYu XLPE
2.5 12 0.60 1.60 33.301382
12TC2-E-YaISYu PVC 148924TC2-E-2XISYu XLPE
2.5 24 0.60 1.80 46.102645
24TC2-E-YaISYu PVC 285836TC2-E-2XISYu XLPE
2.5 36 0.60 2.10 53.453900
36TC2-E-YaISYu PVC 4219
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/triad counts are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
![Page 67: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/67.jpg)
Page 66Industrial Cables
MULTI PAIR UNSHIELDED WITH OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC 90°C, XLPE 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.
4. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
6. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
7. Armour: Galvanised Round Steel Wires.8. Jacket: Poly Vinyl Chloride Flame Retardant
(Black).
SCCItem Code
Insulation Material
Type
Conductor area size (mm2)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-A-2XOSSWYu XLPE0.5 2
0.50 0.80 0.90 1.30 14.50 30002PC2-A-YaOSSWYu PVC 0.60 0.80 0.90 1.30 15.10 32804PC2-A-2XOSSWYu XLPE
0.5 40.50 1.10 0.90 1.40 16.60 410
04PC2-A-YaOSSWYu PVC 0.60 1.10 0.90 1.40 17.40 45108PC2-A-2XOSSWYu XLPE
0.5 80.50 1.20 0.90 1.60 20.45 603
08PC2-A-YaOSSWYu PVC 0.60 1.20 1.25 1.60 22.30 78310PC2-A-2XOSSWYu XLPE
0.5 100.50 1.20 1.25 1.60 22.90 801
10PC2-A-YaOSSWYu PVC 0.60 1.20 1.25 1.60 23.40 90012PC2-A-2XOSSWYu XLPE
0.5 120.50 1.20 1.25 1.60 24.20 847
12PC2-A-YaOSSWYu PVC 0.60 1.20 1.25 1.60 24.75 95724PC2-A-2XOSSWYu XLPE
0.5 240.50 1.30 1.60 1.70 30.30 1438
24PC2-A-YaOSSWYu PVC 0.60 1.30 1.60 1.70 32.30 165236PC2-A-2XOSSWYu XLPE
0.5 360.50 1.30 1.60 1.80 33.65 1774
36PC2-A-YaOSSWYu PVC 0.60 1.30 1.60 1.80 36.00 205202PC2-B-2XOSSWYu XLPE
0.75 2 0.60 0.80 0.90 1.40 16.00364
02PC2-B-YaOSSWYu PVC 37204PC2-B-2XOSSWYu XLPE
0.75 4 0.60 1.20 0.90 1.50 18.65509
04PC2-B-YaOSSWYu PVC 52408PC2-B-2XOSSWYu XLPE
0.75 8 0.60 1.20 1.25 1.70 23.70861
08PC2-B-YaOSSWYu PVC 89210PC2-B-2XOSSWYu XLPE
0.75 10 0.60 1.20 1.60 1.70 26.501112
10PC2-B-YaOSSWYu PVC 115112PC2-B-2XOSSWYu XLPE
0.75 12 0.60 1.20 1.60 1.70 37.101195
12PC2-B-YaOSSWYu PVC 124224PC2-B-2XOSSWYu XLPE
0.75 24 0.60 1.50 1.60 1.80 35.001871
24PC2-B-YaOSSWYu PVC 196436PC2-B-2XOSSWYu XLPE
0.75 36 0.60 1.50 2.00 2.00 40.002584
36PC2-B-YaOSSWYu PVC 272402PC2-C-2XOSSWYu XLPE
1.0 2 0.60 0.80 0.90 1.40 16.55387
02PC2-C-YaOSSWYu PVC 39604PC2-C-2XOSSWYu XLPE
1.0 4 0.60 1.20 0.90 1.50 19.30551
04PC2-C-YaOSSWYu PVC 56908PC2-C-2XOSSWYu XLPE
1.0 8 0.60 1.20 1.25 1.70 24.65941
08PC2-C-YaOSSWYu PVC 97510PC2-C-2XOSSWYu XLPE
1.0 10 0.60 1.20 1.60 1.70 27.601217
10PC2-C-YaOSSWYu PVC 126012PC2-C-2XOSSWYu XLPE
1.0 12 0.60 1.20 1.60 1.70 28.301312
12PC2-C-YaOSSWYu PVC 136424PC2-C-2XOSSWYu XLPE
1.0 24 0.60 1.50 1.60 1.80 36.652081
24PC2-C-YaOSSWYu PVC 218436PC2-C-2XOSSWYu XLPE
1.0 36 0.60 1.50 2.00 2.00 42.002894
36PC2-C-YaOSSWYu PVC 3042
12368 5 47
MULTI TWISTED PAIR/TRIAD, UNSHIELDED WITH OVERALL SHIELD, STEEL WIRE ARMOURED INSTRUMENTATION CABLE
EN 50288-7, 90°C / 500VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT
![Page 68: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/68.jpg)
Page 67 Industrial Cables
MULTI TRIAD UNSHIELDED WITH OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
MULTI PAIR UNSHIELDED WITH OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material
Type
Conductor area size (mm2)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-A-2XOSSWYu XLPE0.5 2
0.50 0.80 0.90 1.30 15.35 34102TC2-A-YaOSSWYu PVC 0.60 0.80 0.90 1.30 16.10 37904TC2-A-2XOSSWYu XLPE
0.5 40.50 1.10 0.90 1.40 18.60 473
04TC2-A-YaOSSWYu PVC 0.60 1.10 0.90 1.40 17.70 53008TC2-A-2XOSSWYu XLPE
0.5 80.50 1.20 0.90 1.60 22.75 818
08TC2-A-YaOSSWYu PVC 0.60 1.20 1.25 1.60 24.05 92510TC2-A-2XOSSWYu XLPE
0.5 100.50 1.20 1.25 1.60 24.75 940
10TC2-A-YaOSSWYu PVC 0.60 1.20 1.25 1.60 26.95 101112TC2-A-2XOSSWYu XLPE
0.5 120.50 1.20 1.25 1.60 25.35 1212
12TC2-A-YaOSSWYu PVC 0.60 1.20 1.60 1.60 27.60 129524TC2-A-2XOSSWYu XLPE
0.5 240.50 1.30 1.60 1.70 33.10 1733
24TC2-A-YaOSSWYu PVC 0.60 1.30 1.60 1.70 55.35 202536TC2-A-2XOSSWYu XLPE
0.5 360.50 1.30 1.60 1.80 36.90 2178
36TC2-A-YaOSSWYu PVC 0.60 1.30 2.00 1.80 40.35 280802TC2-B-2XOSSWYu XLPE
0.75 2 0.60 0.80 0.90 1.40 17.10414
02TC2-B-YaOSSWYu PVC 42604TC2-B-2XOSSWYu XLPE
0.75 4 0.60 1.20 0.90 1.50 20.00597
04TC2-B-YaOSSWYu PVC 62008TC2-B-2XOSSWYu XLPE
0.75 8 0.60 1.20 1.25 1.70 26.301150
08TC2-B-YaOSSWYu PVC 119710TC2-B-2XOSSWYu XLPE
0.75 10 0.60 1.20 1.60 1.70 28.701332
10TC2-B-YaOSSWYu PVC 139012TC2-B-2XOSSWYu XLPE
0.75 12 0.60 1.20 1.60 1.70 29.401422
12TC2-B-YaOSSWYu PVC 149324TC2-B-2XOSSWYu XLPE
0.75 24 0.60 1.50 1.60 1.80 39.102505
24TC2-B-YaOSSWYu PVC 264536TC2-B-2XOSSWYu XLPE
0.75 36 0.60 1.50 2.00 2.00 43.903186
36TC2-B-YaOSSWYu PVC 339702TC2-C-2XOSSWYu XLPE
1.0 2 0.60 0.80 0.90 1.40 17.75453
02TC2-C-YaOSSWYu PVC 46604TC2-C-2XOSSWYu XLPE
1.0 4 0.60 1.20 0.90 1.50 51.45750
04TC2-C-YaOSSWYu PVC 77608TC2-C-2XOSSWYu XLPE
1.0 8 0.60 1.20 1.25 1.70 27.401266
08TC2-C-YaOSSWYu PVC 131710TC2-C-2XOSSWYu XLPE
1.0 10 0.60 1.20 1.60 1.70 30.001468
10TC2-C-YaOSSWYu PVC 153212TC2-C-2XOSSWYu XLPE
1.0 12 0.60 1.20 1.60 1.70 30.751591
12TC2-C-YaOSSWYu PVC 166824TC2-C-2XOSSWYu XLPE
1.0 24 0.60 1.50 1.60 1.80 41.052813
24TC2-C-YaOSSWYu PVC 296836TC2-C-2XOSSWYu XLPE
1.0 36 0.60 1.50 2.00 2.00 46.153627
36TC2-C-YaOSSWYu PVC 3858
SCCItem Code
Insulation Material
Type
Conductor area size (mm2)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-D-2XOSSWYu XLPE1.5 2 0.60 0.90 0.90 1.40 17.65
44802PC2-D-YaOSSWYu PVC 45804PC2-D-2XIOSWYu XLPE
1.5 4 0.60 1.20 0.90 1.60 20.65641
04PC2-D-YaOSSWYu PVC 66008PC2-D-2XOSSWYu XLPE
1.5 8 0.60 1.30 1.60 1.80 37.351261
08PC2-D-YaOSSWYu PVC 130110PC2-D-2XOSSWYu XLPE
1.5 10 0.60 1.30 1.60 1.80 29.901459
10PC2-D-YaOSSWYu PVC 150812PC2-D-2XOSSWYu XLPE
1.5 12 0.60 1.30 1.60 1.80 30.601560
12PC2-D-YOISSWYu PVC 161924PC2-D-2XOSSWYu XLPE
1.5 24 0.60 1.50 2.00 2.00 40.652745
24PC2-D-YaOSSWYu PVC 286436PC2-D-2XOSSWYu XLPE
1.5 36 0.60 1.70 2.00 2.10 45.803543
36PC2-D-YaOSSWYu PVC 372102PC2-E-2XOSSWYu XLPE
2.5 2 0.60 1.00 0.90 1.50 19.50553
02PC2-E-YaOSSWYu PVC 56504PC2-E-2XOSSWYu XLPE
2.5 4 0.60 1.30 1.25 1.70 23.45910
04PC2-E-YaOSSWYu PVC 93308PC2-E-2XOSSWYu XLPE
2.5 8 0.60 1.40 1.60 1.90 30.701567
08PC2-E-YaOSSWYu PVC 161410PC2-E-2XOSSWYu XLPE
2.5 10 0.60 1.40 1.60 1.90 33.101812
10PC2-E-YaOSSWYu PVC 187112PC2-E-2XOSSWYu XLPE
2.5 12 0.60 1.40 1.60 1.90 33.951970
12PC2-E-YaOSSWYu PVC 204124PC2-E-2XOSSWYu XLPE
2.5 24 0.60 1.60 2.00 2.10 45.303507
24PC2-E-YaOSSWYu PVC 264936PC2-E-2XOSSWYu XLPE
2.5 36 0.60 1.80 2.50 2.20 52.154984
36PC2-E-YaOSSWYu PVC 5197
![Page 69: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/69.jpg)
Page 68Industrial Cables
MULTI TRIAD UNSHIELDED WITH OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material
Type
Conductor area size (mm2)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-D-2XOSSWYu XLPE1.5 2 0.60 0.90 0.90 1.40 19.00
52602TC2-D-YaOSSWYu PVC 54104TC2-D-2XOSSWYu XLPE
1.5 4 0.60 1.20 0.90 1.60 22.95882
04TC2-D-YaOSSWYu PVC 91108TC2-D-2XOSSWYu XLPE
1.5 8 0.60 1.30 1.60 1.80 29.651512
08TC2-D-YaOSSWYu PVC 157110TC2-D-2XOSSWYu XLPE
1.5 10 0.60 1.30 1.60 1.80 32.501767
10TC2-D-YaOSSWYu PVC 184112TC2-D-2XOSSWYu XLPE
1.5 12 0.60 1.30 1.60 1.80 33.351908
12TC2-D-YaOSSWYu PVC 199724TC2-D-2XOSSWYu XLPE
1.5 24 0.60 1.50 2.00 2.00 44.603412
24TC2-D-YaOSSWYu PVC 358936TC2-D-2XOSSWYu XLPE
1.5 36 0.60 1.70 2.00 2.10 51.454858
36TC2-D-YaOSSWYu PVC 512402TC2-E-2XOSSWYu XLPE
2.5 2 0.60 1.00 0.90 1.50 21.75759
02TC2-E-YaOSSWYu PVC 77704TC2-E-2XOSSWYu XLPE
2.5 4 0.60 1.30 1.25 1.70 25.301101
04TC2-E-YaOSSWYu PVC 113708TC2-E-2XOSSWYu XLPE
2.5 8 0.60 1.40 1.60 1.90 32.851918
08TC2-E-YaOSSWYu PVC 198910TC2-E-2XOSSWYu XLPE
2.5 10 0.60 1.40 1.60 1.90 36.152243
10TC2-E-YaOSSWYu PVC 233112TC2-E-2XOSSWYu XLPE
2.5 12 0.60 1.40 1.60 1.90 37.152460
12TC2-E-YaOSSWYu PVC 256624TC2-E-2XOSSWYu XLPE
2.5 24 0.60 1.60 2.00 2.10 50.854850
24TC2-E-YaOSSWYu PVC 506336TC2-E-2XOSSWYu XLPE
2.5 36 0.60 1.80 2.50 2.20 57.556376
36TC2-E-YaOSSWYu PVC 6695
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/triad counts are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
![Page 70: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/70.jpg)
Page 69 Industrial Cables
12349 6 578
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC 90°C, XLPE 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.4. Individual Screening/Shield: Aluminium-
Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
8. Armour: Galvanised Round Steel Wires.9. Jacket: Poly Vinyl Chloride Flame Retardant
(Black).
MULTI TWISTED PAIR/TRIAD WITH INDIVIDUAL AND OVERALL SHIELD, STEEL WIRE ARMOURED INSTRUMENTATION CABLE
EN 50288-7, 90°C / 500V SUNLIGHT & OIL RESISTANT, FLAME RETARDANT
MULTI PAIR WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor area size (mm2)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-A-2XISSWYu XLPE0.5 2
0.50 0.90 0.90 1.40 15.40 34502PC2-A-YaISSWYu PVC 0.60 0.90 0.90 1.40 16.05 37904PC2-A-2XISSWYu XLPE
0.5 40.50 1.20 0.90 1.50 17.65 480
04PC2-A-YaISSWYu PVC 0.60 1.20 0.90 1.50 18.50 52608PC2-A-2XISSWYu XLPE
0.5 80.50 1.20 1.25 1.70 22.30 809
08PC2-A-YaISSWYu PVC 0.60 1.20 1.25 1.70 23.50 88610PC2-A-2XISSWYu XLPE
0.5 100.50 1.20 1.25 1.70 24.20 921
10PC2-A-YaISSWYu PVC 0.60 1.20 1.25 1.70 25.55 103112PC2-A-2XISSWYu XLPE
0.5 120.50 1.20 1.25 1.70 24.75 992
12PC2-A-YaISSWYu PVC 0.60 1.20 1.60 1.70 26.85 123324PC2-A-2XISSWYu XLPE
0.5 240.50 1.30 1.60 1.80 32.15 1698
24PC2-A-YaISSWYu PVC 0.60 1.30 1.60 1.80 34.15 191336PC2-A-2XISSWYu XLPE
0.5 360.50 1.50 1.60 1.90 36.20 2192
36PC2-A-YaISSWYu PVC 0.60 1.50 2.00 1.90 39.35 270102PC2-B-2XISSWYu XLPE
0.75 2 0.60 1.10 0.90 1.50 17.40439
02PC2-B-YaISSWYu PVC 44704PC2-B-2XISSWYu XLPE
0.75 4 0.60 1.20 0.90 1.60 19.55570
04PC2-B-YaISSWYu PVC 58608PC2-B-2XISSWYu XLPE
0.75 8 0.60 1.30 1.25 1.80 25.10993
08PC2-B-YaISSWYu PVC 102410PC2-B-2XISSWYu XLPE
0.75 10 0.60 1.30 1.60 1.80 28.051282
10PC2-B-YaISSWYu PVC 132112PC2-B-2XISSWYu XLPE
0.75 12 0.60 1.30 1.60 1.80 28.751367
12PC2-B-YaISSWYu PVC 141424PC2-B-2XISSWYu XLPE
0.75 24 0.60 1.70 1.60 2.00 37.552225
24PC2-B-YaISSWYu PVC 231936PC2-B-2XISSWYu XLPE
0.75 36 0.60 2.00 2.00 2.20 43.503171
36PC2-B-YaISSWYu PVC 331202PC2-C-2XISSWYu XLPE
1.0 2 0.60 1.10 0.90 1.50 18.00468
02PC2-C-YaISSWYu PVC 47604PC2-C-2XISSWYu XLPE
1.0 4 0.60 1.20 0.90 1.60 20.25619
04PC2-C-YaISSWYu PVC 63608PC2-C-2XISSWYu XLPE
1.0 8 0.60 1.30 1.25 1.80 26.801199
08PC2-C-YaISSWYu PVC 123310PC2-C-2XISSWYu XLPE
1.0 10 0.60 1.30 1.60 1.80 29.201389
10PC2-C-YaISSWYu PVC 143212PC2-C-2XISSWYu XLPE
1.0 12 0.60 1.30 1.60 1.80 29.901501
12PC2-C-YaISSWYu PVC 155324PC2-C-2XISSWYu XLPE
1.0 24 0.60 1.70 1.60 2.00 40.052677
24PC2-C-YaISSWYu PVC 278036PC2-C-2XISSWYu XLPE
1.0 36 0.60 2.00 2.00 2.20 45.503492
36PC2-C-YaISSWYu PVC 3646
![Page 71: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/71.jpg)
Page 70Industrial Cables
MULTI PAIR WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material
Type
Conductor area size (mm2)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-D-2XISSWYu XLPE1.5 2 0.60 1.20 0.90 1.60 19.35
54102PC2-D-YaISSWYu PVC 55104PC2-D-2XISSWYu XLPE
1.5 4 0.60 1.30 1.25 1.70 22.50828
04PC2-D-YaISSWYu PVC 84808PC2-D-2XISSWYu XLPE
1.5 8 0.60 1.50 1.60 1.90 29.051416
08PC2-D-YaISSWYu PVC 145510PC2-D-2XISSWYu XLPE
1.5 10 0.60 1.50 1.60 1.90 31.751651
10PC2-D-YaISSWYu PVC 170012PC2-D-2XISSWYu XLPE
1.5 12 0.60 1.50 1.60 1.90 32.501770
12PC2-D-YaISSWYu PVC 182924PC2-D-2XISSWYu XLPE
1.5 24 0.60 1.70 2.00 2.10 43.103128
24PC2-D-YaISSWYu PVC 324636PC2-D-2XISSWYu XLPE
1.5 36 0.60 2.00 2.50 2.40 50.204497
36PC2-D-YaISSWYu PVC 467502PC2-E-2XISSWYu XLPE
2.5 2 0.60 1.30 1.25 1.70 21.90759
02PC2-E-YaISSWYu PVC 77104PC2-E-2XISSWYu XLPE
2.5 4 0.60 1.40 1.25 1.80 24.651010
04PC2-E-YaISSWYu PVC 103408PC2-E-2XISSWYu XLPE
2.5 8 0.60 1.60 1.60 2.00 31.951749
08PC2-E-YaISSWYu PVC 179610PC2-E-2XISSWYu XLPE
2.5 10 0.60 1.60 1.60 2.00 35.052035
10PC2-E-YaISSWYu PVC 209412PC2-E-2XISSWYu XLPE
2.5 12 0.60 1.60 1.60 2.00 35.952212
12PC2-E-YaISSWYu PVC 228324PC2-E-2XISSWYu XLPE
2.5 24 0.60 1.80 2.00 2.20 47.853917
24PC2-E-YaISSWYu PVC 405936PC2-E-2XISSWYu XLPE
2.5 36 0.60 2.10 2.50 2.50 55.705659
36PC2-E-YaISSWYu PVC 5872
MULTI TRIAD WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor area size (mm2)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-A-2XISWFYu XLPE0.5 2 0.60
0.90 0.90 1.40 16.80 40302TC2-A-YaISSWYu PVC 0.90 0.90 1.40 17.60 44504TC2-A-2XISSWYu XLPE
0.5 4 0.601.20 0.90 1.50 19.35 563
04TC2-A-YaISSWYu PVC 1.20 0.90 1.50 20.35 62508TC2-A-2XISSWYu XLPE
0.5 8 0.601.20 1.25 1.70 24.75 964
08TC2-A-YaISSWYu PVC 1.20 1.60 1.70 26.80 121010TC2-A-2XISSWYu XLPE
0.5 10 0.601.20 1.60 1.70 27.70 1249
10TC2-A-YaISSWYu PVC 1.20 1.60 1.70 29.30 140212TC2-A-2XISSWYu XLPE
0.5 12 0.601.20 1.60 1.70 28.35 1352
12TC2-A-YaISSWYu PVC 1.20 1.60 1.70 30.00 150124TC2-A-2XISSWYu XLPE
0.5 24 0.601.30 1.60 1.80 36.35 2068
24TC2-A-YaISSWYu PVC 1.30 2.00 1.80 39.55 261336TC2-A-2XISSWYu XLPE
0.5 36 0.601.50 2.00 1.90 41.90 2927
36TC2-A-YaISSWYu PVC 1.50 2.00 1.90 44.75 338902TC2-B-2XISSWYu XLPE
0.75 2 0.60 1.10 0.90 1.50 19.05514
02TC2-B-YaISSWYu PVC 52604TC2-B-2XISSWYu XLPE
0.75 4 0.60 1.20 1.25 1.60 22.25788
04TC2-B-YaISSWYu PVC 81108TC2-B-2XISSWYu XLPE
0.75 8 0.60 1.30 1.60 1.80 28.701336
08TC2-B-YaISSWYu PVC 138310TC2-B-2XISSWYu XLPE
0.75 10 0.60 1.30 1.60 1.80 31.401557
10TC2-B-YaISSWYu PVC 161612TC2-B-2XISSWYu XLPE
0.75 12 0.60 1.30 1.60 1.80 32.201664
12TC2-B-YaISSWYu PVC 173524TC2-B-2XISSWYu XLPE
0.75 24 0.60 1.70 2.00 2.00 43.352989
24TC2-B-YaISSWYu PVC 312936TC2-B-2XISSWYu XLPE
0.75 36 0.60 2.00 2.50 2.20 50.354305
36TC2-B-YaISSWYu PVC 451602TC2-C-2XISSWYu XLPE
1.0 2 0.60 1.10 0.90 1.50 19.75551
02TC2-C-YaISSWYu PVC 56404TC2-C-2XISSWYu XLPE
1.0 4 0.60 1.20 1.25 1.60 23.10854
04TC2-C-YaISSWYu PVC 88008TC2-C-2XISSWYu XLPE
1.0 8 0.60 1.30 1.60 1.80 29.901471
08TC2-C-YaISSWYu PVC 152210TC2-C-2XISSWYu XLPE
1.0 10 0.60 1.30 1.60 1.80 32.801696
10TC2-C-YaISSWYu PVC 176012TC2-C-2XISSWYu XLPE
1.0 12 0.60 1.30 1.60 1.80 33.651836
12TC2-C-YaISSWYu PVC 191424TC2-C-2XISSWYu XLPE
1.0 24 0.60 1.70 2.00 2.00 45.453330
24TC2-C-YaISSWYu PVC 348436TC2-C-2XISSWYu XLPE
1.0 36 0.60 2.00 2.50 2.00 52.804776
36TC2-C-YaISSWYu PVC 5007
![Page 72: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/72.jpg)
Page 71 Industrial Cables
MULTI TRIAD WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCCItem Code
Insulation Material
Type
Conductor area size (mm2)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-D-2XISSWYu XLPE1.5 2 0.60 1.20 1.25 1.60 22.00
74402TC2-D-YaISSWYu PVC 75904TC2-D-2XISSWYu XLPE
1.5 4 0.60 1.30 1.25 1.70 24.901001
04TC2-D-YaISSWYu PVC 130108TC2-D-2XISSWYu XLPE
1.5 8 0.60 1.50 1.60 1.90 32.451739
08TC2-D-YaISSWYu PVC 179810TC2-D-2XISSWYu XLPE
1.5 10 0.60 1.50 1.60 1.90 35.702037
10TC2-D-YaISSWYu PVC 211112TC2-D-2XISSWYu XLPE
1.5 12 0.60 1.50 1.60 1.90 36.652197
12TC2-D-YaISSWYu PVC 228624TC2-D-2XISSWYu XLPE
1.5 24 0.60 1.70 2.50 2.10 50.054312
24TC2-D-YaISSWYu PVC 449036TC2-D-2XISSWYu XLPE
1.5 36 0.60 2.00 2.50 2.40 57.155677
36TC2-D-YaISSWYu PVC 594302TC2-E-2XISSWYu XLPE
2.5 2 0.60 1.30 1.25 1.70 24.20902
02TC2-E-YaISSWYu PVC 92004TC2-E-2XISSWYu XLPE
2.5 4 0.60 1.40 1.60 1.80 28.151374
04TC2-E-YaISSWYu PVC 141008TC2-E-2XISSWYu XLPE
2.5 8 0.60 1.60 1.60 2.00 35.902179
08TC2-E-YaISSWYu PVC 225010TC2-E-2XISSWYu XLPE
2.5 10 0.60 1.60 2.00 2.00 40.402797
10TC2-E-YaISSWYu PVC 288212TC2-E-2XISSWYu XLPE
2.5 12 0.60 1.60 2.00 2.00 41.503024
12TC2-E-YaISSWYu PVC 313124TC2-E-2XISSWYu XLPE
2.5 24 0.60 1.80 2.50 2.20 55.705454
24TC2-E-YaISSWYu PVC 566736TC2-E-2XISSWYu XLPE
2.5 36 0.60 2.10 2.50 2.50 63.707256
36TC2-E-YaISSWYu PVC 7575
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/triad counts are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard Cutting length 1000m ± 5%, other lengths are available upon request.
![Page 73: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/73.jpg)
Page 72Industrial Cables
SINGLE PAIR SHIELDED – LEAD JACKET – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SINGLE TRIAD SHIELDED– LEAD JACKET – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC 90°C, XLPE 90°C.3. Pairing/Triads: Uniformly twisted
insulated conductors with a suitable twist of lay, applied with a polyester wrapping tape.
4. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
6. Lead Jacket: Lead Alloy.
7. Intermediate Jacket: Poly Vinyl Chloride Flame Retardant.
8. Armour: Galvanised Round Steel Wires.9. Jacket: Poly Vinyl Chloride Flame
Retardant (Black).
SCC Item CodeInsulation Material
Type
Conductor area size (mm2)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Lead Jacket Thickness
(mm)
Intermediate Jacket
Thickness (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
01PC2-A-2XOSLSWYu XLPE0.5
0.500.80 1.10 0.80 0.90 1.30
16.00 64801PC2-A-YaOSLSWYu PVC 0.60 16.35 68001PC2-B-2XOSLSWYu XLPE
0.75 0.60 0.80 1.10 0.80 0.90 1.30 16.80718
01PC2-B-YaOSLSWYu PVC 72201PC2-C-2XOSLSWYu XLPE
1.0 0.60 0.80 1.10 0.80 0.90 1.30 17.15748
01PC2-C-YaOSLSWYu PVC 75301PC2-D-2XOSLSWYu XLPE
1.5 0.60 0.80 1.10 0.90 0.90 1.40 17.90810
01PC2-D-YaOSLSWYu PVC 81501PC2-E-2XOSLSWYu XLPE
2.5 0.60 0.90 1.20 0.90 0.90 1.50 19.60985
01PC2-E-YaOSLSWYu PVC 991
SCC Item CodeInsulation Material
Type
Conductor area size (mm2)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Lead Jacket Thickness
(mm)
Intermediate Jacket
Thickness (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
01TC2-A-2XOSLSWYu XLPE0.5
0.500.80 1.10 0.80 0.90 1.30
16.30 67801TC2-A-YaOSLSWYu PVC 0.60 16.70 72101TC2-B-2XOSLSWYu XLPE
0.75 0.60 0.80 1.10 0.80 0.90 1.30 17.15755
01TC2-B-YaOSLSWYu PVC 76101TC2-C-2XOSLSWYu XLPE
1.0 0.60 0.80 1.10 0.80 0.90 1.30 17.50794
01TC2-C-YaOSLSWYu PVC 80001TC2-D-2XOSLSWYu XLPE
1.5 0.60 0.80 1.10 0.90 0.90 1.40 18.35964
01TC2-D-YaOSLSWYu PVC 87101TC2-E-2XOSLSWYu XLPE
2.5 0.60 0.90 1.20 0.90 0.90 1.50 20.101056
01TC2-E-YaOSLSWYu PVC 1065
Note: 1. For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2. Other conductor sizes are available and pair/triad counts upon request. 3. Dimensions of cables with Galvanised Double Steel Tape Armour are available upon request. 4. Other jacket materials are available upon request. 5. Standard Cutting length 1000m ± 5%. Other lengths are available upon request.
123456789
SINGLE PAIR/TRIAD SHIELDED, PVC BEDDED, LEAD ALLOY SHEATHED, PVC BEDDED, STEEL WIRE ARMOURED AND PVC SHEATHED INSTRUMENTATION CABLE
EN 50288-7, 90°C / 500VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT / LEAD SHEATHED
![Page 74: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/74.jpg)
Page 73 Industrial Cables
MULTI TWISTED PAIR/TRIAD, UNSHIELDED, WITH OVERALL SHIELD, PVC BEDDED, LEAD ALLOY SHEATHED, PVC BEDDED, STEEL WIRE ARMOURED AND PVC SHEATHED INSTRUMENTATION CABLE
MULTI PAIR UNSHIELDED WITH OVERALL SHIELD – LEAD JACKET– WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC 90°C, XLPE 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.4. Assembly and wrapping: The required
number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
5. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
6. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
7. Lead Jacket: Lead Alloy.8. Intermediate Jacket: Poly Vinyl Chloride
Flame Retardant.
9. Armour: Galvanised Round Steel Wires.10. Jacket: Poly Vinyl Chloride Flame Retardant
(Black).
SCC Item CodeInsulation Material
Type
Conductor area size (mm2)
No. of (Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Lead Jacket
Thickness (mm)
Intermediate Jacket
Thickness (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
02PC2-A-2XOSLSWYu XLPE0.5 2
0.500.80 1.10 0.80 0.90 1.30
18.45 85002PC2-A-YaOSLSWYu PVC 0.60 19.05 90804PC2-A-2XOSLSWYu XLPE
0.5 40.50
1.10 1.10 0.80 1.25 1.4021.30 1155
04PC2-A-YaOSLSWYu PVC 0.60 22.05 124108PC2-A-2XOSLSWYu XLPE
0.5 80.50
1.20 1.10 1.00 1.60 1.6026.25 1689
08PC2-A-YaOSLSWYu PVC 0.60 27.40 183010PC2-A-2XOSLSWYu XLPE
0.5 100.50
1.20 1.10 1.00 1.60 1.6028.00 1891
10PC2-A-2XOSLSWYu PVC 0.60 29.30 205312PC2-A-2XOSLSWYu XLPE
0.5 120.50
1.20 1.10 1.00 1.60 1.6028.50 1965
12PC2-A-YaOSLSWYu PVC 0.60 29.85 214224PC2-A-2XOSLSWYu XLPE
0.5 240.50
1.30 1.30 1.00 1.60 1.7035.15 2927
24PC2-A-YaOSLSWYu PVC 0.60 37.10 324736PC2-A-2XOSLSWYu XLPE
0.5 360.50
1.30 1.40 1.20 2.00 1.8039.95 3861
36PC2-A-YaOSLSWYu PVC 0.60 42.25 428702PC2-B-2XOSLSWYu XLPE
0.75 2 0.60 0.80 1.10 0.80 0.90 1.40 20.00973
02PC2-B-YaOSLSWYu PVC 98104PC2-B-2XOSLSWYu XLPE
0.75 4 0.60 1.20 1.10 0.80 1.25 1.50 23.351351
04PC2-B-YaOSLSWYu PVC 136608PC2-B-2XOSLSWYu XLPE
0.75 8 0.60 1.20 1.20 1.00 1.60 1.70 29.002059
08PC2-B-YaOSLSWYu PVC 209710PC2-B-2XOSLSWYu XLPE
0.75 10 0.60 1.20 1.20 1.00 1.60 1.70 31.102307
10PC2-B-YaOSLSWYu PVC 234612PC2-B-2XOSLSWYu XLPE
0.75 12 0.60 1.20 1.20 1.00 1.60 1.70 31.752422
12PC2-B-YaOSLSWYu PVC 246924PC2-B-2XOSLSWYu XLPE
0.75 24 0.60 1.50 1.40 1.20 2.00 1.80 41.254037
24PC2-B-YaOSLSWYu PVC 413136PC2-B-2XOSLSWYu XLPE
0.75 36 0.60 1.50 1.60 1.30 2.00 2.00 46.105097
36PC2-B-YaOSLSWYu PVC 523702PC2-C-2XOSLSWYu XLPE
1.0 2 0.60 0.80 1.10 0.80 1.25 1.40 21.251125
02PC2-C-YaOSLSWYu PVC 113404PC2-C-2XOSLSWYu XLPE
1.0 4 0.60 1.20 1.10 0.80 1.25 1.50 24.001433
04PC2-C-YaOSLSWYu PVC 145008PC2-C-2XOSLSWYu XLPE
1.0 8 0.60 1.20 1.20 1.00 1.60 1.70 30.002201
08PC2-C-YaOSLSWYu PVC 223610PC2-C-2XOSLSWYu XLPE
1.0 10 0.60 1.20 1.20 1.00 1.60 1.70 32.252485
10PC2-C-YaOSLSWYu PVC 252812PC2-C-2XOSLSWYu XLPE
1.0 12 0.60 1.20 1.20 1.00 1.60 1.70 32.902599
12PC2-C-YaOSLSWYu PVC 265124PC2-C-2XOSLSWYu XLPE
1.0 24 0.60 1.50 1.40 1.20 2.00 1.80 42.904350
24PC2-C-YaOSLSWYu PVC 445236PC2-C-2XOSLSWYu XLPE
1.0 36 0.60 1.50 1.60 1.30 2.50 2.00 49.055919
36PC2-C-YaOSLSWYu PVC 6074
12345678910
EN 50288-7, 90°C / 500VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT / LEAD SHEATHED
![Page 75: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/75.jpg)
Page 74Industrial Cables
MULTI PAIR UNSHIELDED WITH OVERALL SHIELD – LEAD JACKET – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCC Item CodeInsulation Material
Type
Conductor area size (mm2)
No. of (Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Lead Jacket
Thickness (mm)
Intermediate Jacket
Thickness (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
02PC2-D-2XOSLSWYu XLPE1.5 2 0.60 0.90 1.10 0.80 1.25 1.40 22.35
124702PC2-D-YaOSLSWYu PVC 125704PC2-D-2XOSLSWYu XLPE
1.5 4 0.60 1.20 1.20 1.00 1.60 1.60 26.651815
04PC2-D-YaOSLSWYu PVC 183508PC2-D-2XOSLSWYu XLPE
1.5 8 0.60 1.30 1.30 1.00 1.60 1.80 32.302578
08PC2-D-YaOSLSWYu PVC 261810PC2-D-2XOSLSWYu XLPE
1.5 10 0.60 1.30 1.30 1.00 1.60 1.80 34.702914
10PC2-D-YaOSLSWYu PVC 296312PC2-D-2XOSLSWYu XLPE
1.5 12 0.60 1.30 1.30 1.00 1.60 1.80 35.453056
12PC2-D-YaOSLSWYu PVC 311524PC2-D-2XOSLSWYu XLPE
1.5 24 0.60 1.50 1.60 1.30 2.00 2.00 46.705300
24PC2-D-YaOSLSWYu PVC 541836PC2-D-2XOSLSWYu XLPE
1.5 36 0.60 1.70 1.80 1.40 2.50 2.10 53.557197
36PC2-D-YaOSLSWYu PVC 737502PC2-E-2XOSLSWYu XLPE
2.5 2 0.60 1.00 1.20 0.90 1.25 1.50 24.601522
02PC2-E-YaOSLSWYu PVC 153304PC2-E-2XOSLSWYu XLPE
2.5 4 0.60 1.30 1.30 1.10 1.60 1.70 29.202209
04PC2-E-YaOSLSWYu PVC 223308PC2-E-2XSLSWYu XLPE
2.5 8 0.60 1.40 1.40 1.10 1.60 1.90 25.453161
08PC2-E-YaOSLSWYu PVC 320810PC2-E-2XOSLSWYu XLPE
2.5 10 0.60 1.40 1.40 1.10 2.00 1.90 39.153820
10PC2-E-YaOSLSWYu PVC 387912PC2-E-2XOSLSWYu XLPE
2.5 12 0.60 1.40 1.40 1.10 2.00 1.90 40.004022
12PC2-E-YaOSLSWYu PVC 409324PC2-E-2XOSLSWYu XLPE
2.5 24 0.60 1.60 1.70 1.40 2.50 2.10 52.806954
24PC2-E-YaOSLSWYu PVC 709636PC2-E-2XOSLSWYu XLPE
2.5 36 0.60 1.80 1.90 1.50 2.50 2.20 59.308913
36PC2-E-YaOSLSWYu PVC 9126
MULTI TRIAD UNSHIELDED WITH OVERALL SHIELD–LEAD JACKET–WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCC Item CodeInsulation Material
Type
Conductor area size (mm2)
No. of (Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket
Thickness (nom.) (mm)
Lead Jacket
Thickness (mm)
Intermediate Jacket
Thickness (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
02TC2-A-2XOSLSWYu XLPE0.5 2
0.50 0.80 1.10 0.80 0.90 1.30 19.35 93302TC2-A-YaOSLSWYu PVC 0.60 0.80 1.10 0.80 1.25 1.30 20.05 110404TC2-A-2XOSLSWYu XLPE
0.5 40.50 1.10 1.10 0.80 1.25 1.40 22.40 1270
04TC2-A-YaOSLSWYu PVC 0.60 1.10 1.10 0.80 1.25 1.40 23.30 138208TC2-A-2XOSLSWYu XLPE
0.5 80.50 1.20 1.10 1.00 1.60 1.60 27.85 1893
08TC2-A-YaOSLSWYu PVC 0.60 1.20 1.10 1.00 1.60 1.60 29.15 208110TC2-A-2XOSLSWYu XLPE
0.5 100.50 1.20 1.10 1.00 1.60 1.60 29.85 2125
10TC2-A-YaOSLSWYu PVC 0.60 1.20 1.10 1.00 1.60 1.60 31.35 233912TC2-A-2XOSLSWYu XLPE
0.5 120.50 1.20 1.10 1.00 1.60 1.60 30.45 2218
12TC2-A-YaOSLSWYu PVC 0.60 1.20 1.10 1.00 1.60 1.60 32.00 246824TC2-A-2XOSLSWYu XLPE
0.5 240.50 1.30 1.30 1.00 2.00 1.70 38.70 3614
24TC2-A-YaOSLSWYu PVC 0.60 1.30 1.30 1.00 2.00 1.70 40.95 404936TC2-A-2XOSLSWYu XLPE
0.5 360.50 1.30 1.40 1.20 2.00 1.80 43.15 4486
36TC2-A-YaOSLSWYu PVC 0.60 1.30 1.40 1.20 2.00 1.80 45.80 504902TC2-B-2XOSLSWYu XLPE
0.75 2 0.60 0.80 1.10 0.80 1.25 1.40 21.801186
02TC2-B-YaOSLSWYu PVC 119804TC2-B-2XOSLSWYu XLPE
0.75 4 0.60 1.20 1.10 0.80 1.25 1.50 24.651514
04TC2-B-YaOSLSWYu PVC 153708TC2-B-2XOSLSWYu XLPE
0.75 8 0.60 1.20 1.20 1.00 1.60 1.70 30.952337
08TC2-B-YaOSLSWYu PVC 238410TC2-B-2XOSLSWYu XLPE
0.75 10 0.60 1.20 1.20 1.00 1.60 1.70 33.352641
10TC2-B-YaOSLSWYu PVC 269912TC2-B-2XOSLSWYu XLPE
0.75 12 0.60 1.20 1.20 1.00 1.60 1.70 34.052767
12TC2-B-YaOSLSWYu PVC 287324TC2-B-2XOSLSWYu XLPE
0.75 24 0.60 1.50 1.40 1.20 2.00 1.80 44.554674
24TC2-B-YaOSLSWYu PVC 481436TC2-B-2XOSLSWYu XLPE
0.75 36 0.60 1.50 1.60 1.30 2.50 2.00 51.006344
36TC2-B-YaOSLSWYu PVC 6555
![Page 76: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/76.jpg)
Page 75 Industrial Cables
MULTI TRIAD UNSHIELDED WITH OVERALL SHIELD–LEAD JACKET–WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
SCC Item CodeInsulation Material
Type
Conductor area size (mm2)
No. of (Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket
Thickness (nom.) (mm)
Lead Jacket
Thickness (mm)
Intermediate Jacket
Thickness (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
02TC2-C-2XOSLSWYu XLPE1.0 2 0.60 0.80 1.10 0.80 1.25 1.40 22.45
125102TC2-C-YaOSLSWYu PVC 126404TC2-C-2XOSLSWYu XLPE
1.0 4 0.60 1.20 1.10 0.80 1.60 1.50 26.151729
04TC2-C-YaOSLSWYu PVC 175508TC2-C-2XOSLSWYu XLPE
1.0 8 0.60 1.20 1.20 1.00 1.60 1.70 32.052509
08TC2-C-YaOSLSWYu PVC 256110TC2-C-2XOSLSWYu XLPE
1.0 10 0.60 1.20 1.20 1.00 1.60 1.70 34.602843
10TC2-C-YaOSLSWYu PVC 290712TC2-C-2XOSLSWYu XLPE
1.0 12 0.60 1.20 1.20 1.00 1.60 1.70 35.353004
12TC2-C-YaOSLSWYu PVC 308124TC2-C-2XOSLSWYu XLPE
1.0 24 0.60 1.50 1.40 1.20 2.00 1.80 46.505097
24TC2-C-YaOSLSWYu PVC 525136TC2-C-2XOSLSWYu XLPE
1.0 36 0.60 1.50 1.60 1.30 2.50 2.00 53.256950
36TC2-C-YaOSLSWYu PVC 718702TC2-D-2XOSLSWYu XLPE
1.5 2 0.60 0.90 1.10 0.80 1.25 1.40 23.701400
02TC2-D-YaOSLSWYu PVC 141504TC2-D-2XOSLSWYu XLPE
1.5 4 0.60 1.20 1.20 1.00 1.60 1.60 28.252044
04TC2-D-YaOSLSWYu PVC 207308TC2-D-2XOSLSWYu XLPE
1.5 8 0.60 1.30 1.30 1.00 1.60 1.80 34.452970
08TC2-D-YaOSLSWYu PVC 302910TC2-D-2XOSLSWYu XLPE
1.5 10 0.60 1.30 1.30 1.00 1.60 1.80 37.353367
10TC2-D-2XOSLSWYu PVC 344112TC2-D-2XOSLSWYu XLPE
1.5 12 0.60 1.30 1.30 1.00 2.00 1.80 40.003796
12TC2-D-YaOSLSWYu PVC 388424TC2-D-2XOSLSWYu XLPE
1.5 24 0.60 1.50 1.60 1.30 2.50 2.00 51.706632
24TC2-D-YaOSLSWYu PVC 680936TC2-D-2XOSLSWYu XLPE
1.5 36 0.60 1.70 1.80 1.40 2.50 2.10 58.158540
36TC2-D-YaOSLSWYu PVC 880602TC2-E-2XOSLSWYu XLPE
2.5 2 0.60 1.00 1.20 0.90 1.60 1.50 26.851851
02TC2-E-YaOSLSWYu PVC 186904TC2-E-2XOSLSWYu XLPE
2.5 4 0.60 1.30 1.30 1.10 1.60 1.70 31.052503
04TC2-E-YaOSLSWYu PVC 253808TC2-E-2XOSLSWYu XLPE
2.5 8 0.60 1.40 1.40 1.10 2.00 1.90 38.903910
08TC2-E-YaOSLSWYu PVC 398110TC2-E-2XOSLSWYu XLPE
2.5 10 0.60 1.40 1.40 1.10 2.00 1.90 42.204461
10TC2-E-YaOSLSWYu PVC 454912TC2-E-2XOSLSWYu XLPE
2.5 12 0.60 1.40 1.40 1.10 2.00 1.90 43.204727
12TC2-E-YaOSLSWYu PVC 483324TC2-E-2XOSLSWYu XLPE
2.5 24 0.60 1.60 1.70 1.40 2.50 2.10 57.358281
24TC2-E-YaOSLSWYu PVC 849336TC2-E-2XOSLSWYu XLPE
2.5 36 0.60 1.80 1.90 1.50 2.50 2.20 64.6510736
36TC2-E-YaOSLSWYu PVC 11055
Note: 1. For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2. Other conductor sizes are available and pair/triad counts upon request. 3. Dimensions of cables with Galvanised Double Steel Tape Armour are available upon request. 4. Other jacket materials are available upon request. 5. Standard Cutting length 1000m ± 5%. Other lengths are available upon request.
![Page 77: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/77.jpg)
Page 76Industrial Cables
1. Conductor: Plain/Tinned Stranded Copper conductor.
2. Insulation: PVC 90°C, XLPE 90°C.3. Pairing/Triads: Uniformly twisted
insulated conductors with a suitable twist of lay.
4. Individual Screening/Shield: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Inner Jacket: Poly Vinyl Chloride Flame Retardant.
8. Lead Jacket: Lead Alloy.9. Intermediate Jacket: Poly Vinyl Chloride
Flame Retardant.10. Armour: Galvanised Round Steel
Wires.11. Jacket: Poly Vinyl Chloride Flame
Retardant (Black).
MULTI TRIAD UNSHIELDED WITH OVERALL SHIELD–LEAD JACKET–WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCC Item CodeInsulation Material
Type
Conductor area size (mm2)
No. of (Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket
Thickness (nom.) (mm)
Lead Jacket
Thickness (mm)
Intermediate Jacket
Thickness (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
02PC2-A-2XISLSWYu XLPE0.5 2
0.50 0.90 1.10 0.80 0.90 1.40 19.40 93202PC2-A-YaISLSWYu PVC 0.60 20.05 99704PC2-A-2XISLSWYu XLPE
0.5 40.50 1.20 1.10 0.80 1.25 1.50 22.35 1271
04PC2-A-YaISLSWYu PVC 0.60 23.15 136008PC2-A-2XISLSWYu XLPE
0.5 80.50 1.20 1.20 1.00 1.60 1.70 27.65 1935
08PC2-A-YaISLSWYu PVC 0.60 28.80 208310PC2-A-2XISLSWYu XLPE
0.5 100.50 1.20 1.20 1.00 1.60 1.70 29.50 2151
10PC2-A-2XISLSWYu PVC 0.60 30.85 233812PC2-A-2XISLSWYu XLPE
0.5 120.50 1.20 1.20 1.00 1.60 1.70 30.05 224
12PC2-A-YaISLSWYu PVC 0.60 31.45 244624PC2-A-2XISLSWYu XLPE
0.5 240.50 1.30 1.40 1.20 2.00 1.80 38.40 3668
24PC2-A-YaISLSWYu PVC 0.60 40.40 401436PC2-A-2XISLSWYu XLPE
0.5 360.50 1.50 1.60 1.30 2.00 1.90 43.10 4702
36PC2-A-YaISLSWYu PVC 0.60 45.45 517902PC2-B-2XISLSWYu XLPE
0.75 2 0.60 1.10 1.10 0.80 1.25 1.50 22.101213
02PC2-B-YaISLSWYu PVC 122104PC2-B-2XISLSWYu XLPE
0.75 4 0.60 1.20 1.20 1.00 1.25 1.60 24.851559
04PC2-B-YaISLSWYu PVC 157508PC2-B-2XISLSWYu XLPE
0.75 8 0.60 1.30 1.30 1.00 1.60 1.80 30.652353
08PC2-B-YaISLSWYu PVC 238410PC2-B-2XISLSWYu XLPE
0.75 10 0.60 1.30 1.30 1.00 1.60 1.80 32.902638
10PC2-B-YaISLSWYu PVC 267712PC2-B-2XISLSWYu XLPE
0.75 12 0.60 1.30 1.40 1.10 1.60 1.80 33.952897
12PC2-B-YaISLSWYu PVC 294424PC2-B-2XISLSWYu XLPE
0.75 24 0.60 1.70 1.60 1.30 2.00 2.00 44.454833
24PC2-B-YaISLSWYu PVC 492736PC2-B-2XISLSWYu XLPE
0.75 36 0.60 2.00 1.80 1.50 2.50 2.20 51.456646
36PC2-B-YaISLSWYu PVC 678702PC2-C-2XISLSWYu XLPE
1.0 2 0.60 1.10 1.10 0.80 1.25 1.50 22.651278
02PC2-C-YaISLSWYu PVC 128704PC2-C-2XISLSWYu XLPE
1.0 4 0.60 1.20 1.20 1.00 1.60 1.60 26.251762
04PC2-C-YaISLSWYu PVC 177908PC2-C-2XISLSWYu XLPE
1.0 8 0.60 1.30 1.30 1.00 1.60 1.80 31.602501
08PC2-C-YaISLSWYu PVC 253510PC2-C-2XISLSWYu XLPE
1.0 10 0.60 1.30 1.30 1.00 1.60 1.80 34.052823
10PC2-C-YaISLSWYu PVC 286612PC2-C-2XISLSWYu XLPE
1.0 12 0.60 1.30 1.30 1.00 1.60 1.80 35.153087
12PC2-C-YaISLSWYu PVC 313824PC2-C-2XISLSWYu XLPE
1.0 24 0.60 1.70 1.60 1.30 2.00 2.00 46.155192
24PC2-C-YaISLSWYu PVC 529536PC2-C-2XISLSWYu XLPE
1.0 36 0.60 2.00 1.80 1.50 2.50 2.20 53.507161
36PC2-C-YaISLSWYu PVC 7315
1234567891011
MULTI TWISTED PAIR/TRIAD, WITH INDIVIDUAL AND OVERALL SHIELD, PVC BEDDED, LEAD ALLOY SHEATHED, PVC BEDDED, STEEL WIRE ARMOURED, AND PVC SHEATHED INSTRUMENTATION CABLE
EN 50288-7, 90°C / 500VSUNLIGHT & OIL RESISTANT, FLAME RETARDANT / LEAD SHEATHED
![Page 78: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/78.jpg)
Page 77 Industrial Cables
MULTI TRIAD UNSHIELDED WITH OVERALL SHIELD–LEAD JACKET–WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
MULTI TRIAD WITH INDIVIDUAL AND OVERALL SHIELD–LEAD JACKET- WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCC Item CodeInsulation Material
Type
Conductor area size (mm2)
No. of (Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket
Thickness (nom.) (mm)
Lead Jacket
Thickness (mm)
Intermediate Jacket
Thickness (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
02PC2-D-2XISLSWYu XLPE1.5 2 0.60 1.20 1.10 1.00 1.25 1.60 24.45
144002PC2-D-YaISLSWYu PVC 145004PC2-D-2XISLSWYu XLPE
1.5 4 0.60 1.30 1.20 1.00 1.60 1.70 27.801963
04PC2-D-YaISLSWYu PVC 198308PC2-D-2XISLSWYu XLPE
1.5 8 0.60 1.50 1.40 1.20 1.60 1.90 34.502972
08PC2-D-YaISLSWYu PVC 301110PC2-D-2XISLSWYu XLPE
1.5 10 0.60 1.50 1.50 1.20 1.60 1.90 37.403470
10PC2-D-YaISLSWYu PVC 352012PC2-D-2XISLSWYu XLPE
1.5 12 0.60 1.50 1.50 1.20 2.00 1.90 38.983881
12PC2-D-YaISLSWYu PVC 394124PC2-D-2XISLSWYu XLPE
1.5 24 0.60 1.70 1.80 1.40 2.50 2.10 50.806558
24PC2-D-YaISLSWYu PVC 667636PC2-D-2XISLSWYu XLPE
1.5 36 0.60 2.00 2.00 1.50 2.50 2.40 57.558410
36PC2-D-YaISLSWYu PVC 858802PC2-E-2XISLSWYu XLPE
2.5 2 0.60 1.30 1.20 1.00 1.60 1.70 27.451869
02PC2-E-YaISLSWYu PVC 188104PC2-E-2XISLSWYu XLPE
2.5 4 0.60 1.40 1.30 1.10 1.60 1.80 30.402370
04PC2-E-YaISLSWYu PVC 239408PC2-E-2XISLSWYu XLPE
2.5 8 0.60 1.60 1.50 1.30 1.60 2.00 37.853591
08PC2-E-YaISLSWYu PVC 363810PC2-E-2XISLSWYu XLPE
2.5 10 0.60 1.60 1.60 1.30 2.00 2.00 41.904452
10PC2-E-YaISLSWYu PVC 451112PC2-E-2XISLSWYu XLPE
2.5 12 0.60 1.60 1.60 1.30 2.00 2.00 42.804708
12PC2-E-YaISLSWYu PVC 477924PC2-E-2XISLSWYu XLPE
2.5 24 0.60 1.80 1.90 1.50 2.50 2.20 56.007945
24PC2-E-YaISLSWYu PVC 808636PC2-E-2XISLSWYu XLPE
2.5 36 0.60 2.10 2.10 1.60 2.50 2.50 63.4510240
36PC2-E-YaISLSWYu PVC 10453
SCC Item CodeInsulation Material
Type
Conductor area size (mm2)
No. of (Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket
Thickness (nom.) (mm)
Lead Jacket
Thickness (mm)
Intermediate Jacket
Thickness (mm)
Diameter of Armour Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
02TC2-A-2XISLSWYu XLPE0.5 2
0.500.90 1.10 0.80 1.25 1.40
21.50 115802TC2-A-YaISLSWYu PVC 0.60 22.30 124004TC2-A-2XISLSWYu XLPE
0.5 40.50
1.20 1.10 0.80 1.25 1.5024.05 1442
04TC2-A-YaISLSWYu PVC 0.60 25.00 155308TC2-A-2XISLSWYu XLPE
0.5 80.50
1.20 1.20 1.00 1.60 1.7030.05 2217
08TC2-A-YaISLSWYu PVC 0.60 31.45 242210TC2-A-2XISLSWYu XLPE
0.5 100.50
1.20 1.20 1.00 1.60 1.7032.30 2505
10TC2-A-YaISLSWYu PVC 0.60 33.95 274112TC2-A-2XISLSWYu XLPE
0.5 120.50
1.20 1.20 1.00 1.60 1.7032.95 2622
12TC2-A-YaISLSWYu PVC 0.60 34.65 287724TC2-A-2XISLSWYu XLPE
0.5 240.50
1.30 1.40 1.20 2.00 1.8042.60 4333
24TC2-A-YaISLSWYu PVC 0.60 48.00 480836TC2-A-2XISLSWYu XLPE
0.5 360.50
1.50 1.60 1.30 2.50 1.9049.00 5957
36TC2-A-YaISLSWYu PVC 0.60 51.80 660302TC2-B-2XISLSWYu XLPE
0.75 2 0.60 1.10 1.10 0.80 1.25 1.50 23.751375
02TC2-B-YaISLSWYu PVC 138704TC2-B-2XISLSWYu XLPE
0.75 4 0.60 1.20 1.20 1.00 1.60 1.60 27.601919
04TC2-B-YaISLSWYu PVC 194308TC2-B-2XISLSWYu XLPE
0.75 8 0.60 1.30 1.30 1.00 1.60 1.80 33.502741
08TC2-B-YaISLSWYu PVC 278810TC2-B-2XISLSWYu XLPE
0.75 10 0.60 1.30 1.30 1.00 1.60 1.80 36.253095
10TC2-B-YaISLSWYu PVC 315512TC2-B-2XISLSWYu XLPE
0.75 12 0.60 1.30 1.40 1.10 1.60 1.80 37.453386
12TC2-B-YaISLSWYu PVC 345624TC2-B-2XISLSWYu XLPE
0.75 24 0.60 1.70 1.60 1.30 2.50 2.00 50.456098
24TC2-B-YaISLSWYu PVC 623836TC2-B-2XISLSWYu XLPE
0.75 36 0.60 2.00 1.80 1.50 2.50 2.20 57.307921
36TC2-B-YaISLSWYu PVC 8132
![Page 79: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/79.jpg)
Page 78Industrial Cables
SCC Item CodeInsulation Material
Type
Conductor area size (mm2)
No. of (Triad)
Insulation Thickness
(nom.) (mm)
Inner Jacket
Thickness (nom.) (mm)
Lead Jacket
Thickness (mm)
Intermediate Jacket
Thickness (mm)
Diameter of Armour
Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
02TC2-C-2XISLSWYu XLPE1.0 2 0.60 1.10 1.10 0.80 1.25 1.50 24.45
145402TC2-C-YaISLSWYu PVC 146704TC2-C-2XISLSWYu XLPE
1.0 4 0.60 1.20 1.20 1.00 1.60 1.60 28.452040
04TC2-C-YaISLSWYu PVC 206608TC2-C-2XISLSWYu XLPE
1.0 8 0.60 1.30 1.30 1.00 1.60 1.80 34.702927
08TC2-C-YaISLSWYu PVC 297810TC2-C-2XISLSWYu XLPE
1.0 10 0.60 1.30 1.30 1.00 2.00 1.80 38.453545
10TC2-C-YaISLSWYu PVC 360912TC2-C-2XISLSWYu XLPE
1.0 12 0.60 1.30 1.40 1.10 2.00 1.80 39.703879
12TC2-C-YaISLSWYu PVC 395624TC2-C-2XISLSWYu XLPE
1.0 24 0.60 1.70 1.60 1.30 2.50 2.00 52.556597
24TC2-C-YaISLSWYu PVC 675236TC2-C-2XISLSWYu XLPE
1.0 36 0.60 2.00 1.80 1.50 2.50 2.20 59.758578
36TC2-C-YaISLSWYu PVC 881002TC2-D-2XISLSWYu XLPE
1.5 2 0.60 1.20 1.10 1.00 1.60 1.60 27.151787
02TC2-D-YaISLSWYu PVC 180204TC2-D-2XISLSWYu XLPE
1.5 4 0.60 1.30 1.20 1.00 1.60 1.70 30.202279
04TC2-D-YaISLSWYu PVC 230808TC2-D-2XISLSWYu XLPE
1.5 8 0.60 1.50 1.40 1.20 2.00 1.90 38.753719
08TC2-D-YaISLSWYu PVC 377810TC2-D-2XISLSWYu XLPE
1.5 10 0.60 1.50 1.50 1.20 2.00 1.90 42.154365
10TC2-D-2XISLSWYu PVC 443912TC2-D-2XISLSWYu XLPE
1.5 12 0.60 1.50 1.50 1.20 2.00 1.90 43.104592
12TC2-D-YaISLSWYu PVC 468124TC2-D-2XISLSWYu XLPE
1.5 24 0.60 1.70 1.80 1.40 2.50 2.10 56.757849
24TC2-D-YaISLSWYu PVC 802636TC2-D-2XISLSWYu XLPE
1.5 36 0.60 2.00 2.00 1.50 2.50 2.40 64.5010176
36TC2-D-YaISLSWYu PVC 1044202TC2-E-2XISLSWYu XLPE
2.5 2 0.60 1.30 1.20 1.10 1.60 1.70 29.702162
02TC2-E-YaISLSWYu PVC 218004TC2-E-2XISLSWYu XLPE
2.5 4 0.60 1.40 1.30 1.10 1.60 1.80 33.152765
04TC2-E-YaISLSWYu PVC 280108TC2-E-2XISLSWYu XLPE
2.5 8 0.60 1.60 1.50 1.30 2.00 2.00 42.604531
08TC2-E-YaISLSWYu PVC 460210TC2-E-2XISLSWYu XLPE
2.5 10 0.60 1.60 1.60 1.30 2.00 2.00 46.505309
10TC2-E-YaISLSWYu PVC 539812TC2-E-2XISLSWYu XLPE
2.5 12 0.60 1.60 1.60 1.30 2.00 2.00 47.605636
12TC2-E-YaISLSWYu PVC 574324TC2-E-2XISLSWYu XLPE
2.5 24 0.60 1.80 1.90 1.50 2.50 2.50 62.859669
24TC2-E-YaISLSWYu PVC 988136TC2-E-2XISLSWYu XLPE
2.5 36 0.60 2.10 2.10 1.60 2.50 2.50 71.5012585
36TC2-E-YaISLSWYu PVC 12904
MULTI TRIAD WITH INDIVIDUAL AND OVERALL SHIELD–LEAD JACKET- WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS (CONTINUATION)
Note: 1. For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2. Other conductor sizes are available and pair/triad counts upon request. 3. Dimensions of cables with Galvanised Double Steel Tape Armour are available upon request. 4. Other jacket materials are available upon request. 5. Standard Cutting length 1000m ± 5%. Other lengths are available upon request.
![Page 80: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/80.jpg)
Page 79 Industrial Cables
APPLICATION
• Instrumentation cables installed in an area that has the risk of fire (as in Fire and Gas Area, is required to be fire resistant).
• Such cable has characteristics that it can survive and carry electric signal in case of fire and flame temperature up to 950°C for 3 hours without circuit breakdown shorted or open. (Meets IEC-60331-21 & BS 6387 Cat. C, W, Z)
FIRE RESISTANT, INSTRUMENTATION CABLES
Single & Multipair and Multi-Triple, individual and /or Collective screen, PVC- sheath
Cable Features:Fire resistant cables that complies with IEC 60331 and BS 6387
Low smoke and zero halogen emission
UnarmouredArmoured
Common Cable Construction:Conductor Type– Plain Copper– Tinned Coated Copper
Conductor Wrapping– Mica Tape
Insulation Material– XLPE 90°C
Unarmoured
Armoured– Galvanised Steel Wires– Double Steel Tape
Jackets– Flame Retardant Low Smoke Zero Halogen Free
ELECTRICAL PROPERTIES OF INSTRUMENTATION CABLES – 500V
Conductor area size (mm2) 0.5 0.75 1.0 1.5 2.5
Conductor Resistance @ 20°CPlain Cu
(Ω / km) max.≤36.0 ≤24.5 ≤18.10 ≤12.10 ≤7.41
Tinned Cu ≤36.7 ≤24.8 ≤18.20 ≤12.20 ≤7.56
Mutual Capacitance @ 1 KhzXLPE
(nF/km) max.≤150 ≤150 ≤150 ≤150 ≤150
PVC ≤150 ≤250 ≤250 ≤250 ≤250
L/R ratio µH/Ω max. ≤25 ≤25 ≤25 ≤40 ≤60
Insulation ResistanceXLPE
MΩ – Kmmin. ≥1000 ≥1000 ≥1000 ≥1000 ≥1000
PVC min. ≥10 ≥10 ≥10 ≥10 ≥10
Test Voltage Core/Core (Urms)Core/shield (Urms)
XLPEV min. ≥2000 ≥2000 ≥2000 ≥2000 ≥2000
PVC
PHYSICAL PROPERTIES
Fire ResistantPasses IEC 60331 for 3 hrs @ 750°C
Passes BS 6387 for 3 hrs @ 950°C Category C and Category W, Z
Flame RetardancyPasses Flame Retardant IEC 60332-1 & IEC 60332-3 Cat. A or C
Passes Flame Retardant IEC 60332-3 Cat. A or C
Test Halogen Acid Gases Passes IEC 60754-1
Low smoke emission Passes IEC 61034
Minimum Bending Radius7.5 x Cable Outside Diameter (for unarmoured cables)10 x Cable Outside Diameter (for armoured cables)
Temperature RangeDuring Operation: -30°C to +90°CDuring Installation: -5°C to +50°C
INSULATION AND JACKET COLOURS
Pair colour Black & White. Other pair colours are available upon request.
Triad colour Black, White and Red. Other triad colours are available upon request.
Jacket colour Black. Other colours are available upon request.
EN 50288-7, 90°C / 500VFIRE RESISTANT CABLES
![Page 81: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/81.jpg)
Page 80Industrial Cables
1. Conductor: Plain/Tinned Stranded Copper conductor, wrapped with Fire Resistant MICA Tape.
2. Insulation: XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted
insulated conductors with a suitable twist of lay.
4. Individual Screening/Shield : Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Jacket: Flame Retardant, Low Smoke Halogen Free (LSHF) (Orange).
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
MULTI PAIR WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material Type
Conductor area size
(mm2)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02PC2-A-FXFISHF XLPE 0.5 2 0.50 0.90 13.10 11504PC2-A-FXFISHF XLPE 0.5 4 0.50 1.20 15.50 20008PC2-A-FXFISHF XLPE 0.5 8 0.50 1.20 20.50 34510PC2-A-FXFISHF XLPE 0.5 10 0.50 1.20 23.10 41012PC2-A-FXFISHF XLPE 0.5 12 0.50 1.20 23.80 48024PC2-A-FXFISHF XLPE 0.5 24 0.50 1.30 32.50 85036PC2-A-FXFISHF XLPE 0.5 36 0.50 1.50 37.50 129002PC2-B-FXFISHF XLPE 0.75 2 0.60 1.10 14.50 15004PC2-B-FXFISHF XLPE 0.75 4 0.60 1.20 17.10 24508PC2-B-FXFISHF XLPE 0.75 8 0.60 1.30 23.10 43010PC2-B-FXFISHF XLPE 0.75 10 0.60 1.30 26.00 54012PC2-B-FXFISHF XLPE 0.75 12 0.60 1.30 27.00 62024PC2-B-FXFISHF XLPE 0.75 24 0.60 1.70 37.50 121036PC2-B-FXFISHF XLPE 0.75 36 0.60 2.00 43.50 175002PC2-C-FXFISHF XLPE 1.0 2 0.60 1.10 15.10 16004PC2-C-FXFISHF XLPE 1.0 4 0.60 1.20 17.50 27008PC2-C-FXFISHF XLPE 1.0 8 0.60 1.30 23.50 47010PC2-C-FXFISHF XLPE 1.0 10 0.60 1.30 26.50 59012PC2-C-FXFISHF XLPE 1.0 12 0.60 1.30 27.50 67024PC2-C-FXFISHF XLPE 1.0 24 0.60 1.70 38.50 132036PC2-C-FXFISHF XLPE 1.0 36 0.60 2.00 45.10 193002PC2-D-FXFISHF XLPE 1.5 2 0.60 1.20 16.50 20004PC2-D-FXFISHF XLPE 1.5 4 0.60 1.30 19.10 33008PC2-D-FXFISHF XLPE 1.5 8 0.60 1.50 25.50 61010PC2-D-FXFISHF XLPE 1.5 10 0.60 1.50 29.10 73512PC2-D-FXFISHF XLPE 1.5 12 0.60 1.50 30.20 84524PC2-D-FXFISHF XLPE 1.5 24 0.60 1.70 41.20 161036PC2-D-FXFISHF XLPE 1.5 36 0.60 2.00 48.50 230002PC2-E-FXFISHF XLPE 2.5 2 0.60 1.30 18.10 25004PC2-E-FXFISHF XLPE 2.5 4 0.60 1.40 19.50 43008PC2-E-FXFISHF XLPE 2.5 8 0.60 1.60 28.50 81010PC2-E-FXFISHF XLPE 2.5 10 0.60 1.60 32.10 98012PC2-E-FXFISHF XLPE 2.5 12 0.60 1.60 33.50 113024PC2-E-FXFISHF XLPE 2.5 24 0.60 1.80 46.30 215036PC2-E-FXFISHF XLPE 2.5 36 0.60 2.10 53.50 3120
12356 47 Illustrations correct?
MULTI PAIR/TRIAD, WITH INDIVIDUAL AND OVERALL SHIELD, UNARMOURED, FIRE RESISTANT INSTRUMENTATION CABLES
EN 50288-7, 90°C / 500VFIRE RESISTANT CABLES
![Page 82: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/82.jpg)
Page 81 Industrial Cables
MULTI TRIAD WITH INDIVIDUAL AND OVERALL SHIELD CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material Type
Conductor area size
(mm2)
No. of Elements(Triad)
Insulation Thickness
(nom.) (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter
Approx. (mm)
Net Weight Approx. (kg/km)
02TC2-A-FXFISHF XLPE 0.5 2 0.50 0.90 14.50 14004TC2-A-FXFISHF XLPE 0.5 4 0.50 1.20 17.50 25008TC2-A-FXFISHF XLPE 0.5 8 0.50 1.20 23.50 43010TC2-A-FXFISHF XLPE 0.5 10 0.50 1.20 26.50 52012TC2-A-FXFISHF XLPE 0.5 12 0.50 1.20 27.50 60024TC2-A-FXFISHF XLPE 0.5 24 0.50 1.30 38.00 111036TC2-A-FXFISHF XLPE 0.5 36 0.50 1.50 44.00 164002TC2-B-FXFISHF XLPE 0.75 2 0.60 1.10 16.50 18504TC2-B-FXFISHF XLPE 0.75 4 0.60 1.20 19.50 30008TC2-B-FXFISHF XLPE 0.75 8 0.60 1.30 26.50 55010TC2-B-FXFISHF XLPE 0.75 10 0.60 1.30 30.00 68012TC2-B-FXFISHF XLPE 0.75 12 0.60 1.30 31.00 78024TC2-B-FXFISHF XLPE 0.75 24 0.60 1.70 43.50 154036TC2-B-FXFISHF XLPE 0.75 36 0.60 2.00 51.00 226002TC2-C-FXFISHF XLPE 1.0 2 0.60 1.10 17.50 20004TC2-C-FXFISHF XLPE 1.0 4 0.60 1.20 20.50 34008TC2-C-FXFISHF XLPE 1.0 8 0.60 1.30 27.50 63010TC2-C-FXFISHF XLPE 1.0 10 0.60 1.30 31.20 78012TC2-C-FXFISHF XLPE 1.0 12 0.60 1.30 32.40 90024TC2-C-FXFISHF XLPE 1.0 24 0.60 1.70 46.00 178036TC2-C-FXFISHF XLPE 1.0 36 0.60 2.00 53.20 261002TC2-D-FXFISHF XLPE 1.5 2 0.60 1.20 19.00 25004TC2-D-FXFISHF XLPE 1.5 4 0.60 1.30 22.10 42008TC2-D-FXFISHF XLPE 1.5 8 0.60 1.50 30.00 80010TC2-D-FXFISHF XLPE 1.5 10 0.60 1.50 34.10 99012TC2-D-FXFISHF XLPE 1.5 12 0.60 1.50 34.50 115024TC2-D-FXFISHF XLPE 1.5 24 0.60 1.70 49.20 220036TC2-D-FXFISHF XLPE 1.5 36 0.60 2.00 56.50 320002TC2-E-FXFISHF XLPE 2.5 2 0.60 1.30 20.50 31004TC2-E-FXFISHF XLPE 2.5 4 0.60 1.40 24.50 57008TC2-E-FXFISHF XLPE 2.5 8 0.60 1.60 33.10 110010TC2-E-FXFISHF XLPE 2.5 10 0.60 1.60 37.50 135012TC2-E-FXFISHF XLPE 2.5 12 0.60 1.60 38.50 155024TC2-E-FXFISHF XLPE 2.5 24 0.60 1.80 54.20 300036TC2-E-FXFISHF XLPE 2.5 36 0.60 2.10 63.20 4400
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/Triad counts are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard Cutting length 1000m ± 5%, other lengths are on request.
![Page 83: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/83.jpg)
Page 82Industrial Cables
1. Conductor: Plain/Tinned Stranded Copper conductor, wrapped with Fire Resistant MICA Tape
2. Insulation: XLPE FR 90°C.3. Pairing/Triads: Uniformly twisted insulated
conductors with a suitable twist of lay.4. Individual Screening/Shield: Aluminium-
Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
5. Assembly and wrapping: The required number of pairs/triads are assembled together with non-hygroscopic fillers (if required) and wrapped with a polyester wrapping tape.
6. Overall Screening: Aluminium-Polyester (AL-PET foil) laminated tape with 100% coverage and suitable overlap, metal side in contact with stranded tinned copper drain wire.
7. Inner Jacket: Flame Retardant, Low Smoke Halogen Free (LSHF)
8. Armour: Galvanised Round Steel Wires.9. Jacket: Flame Retardant, Low Smoke
Halogen Free (LSHF) (Orange).
MULTI TWISTED PAIR/TRIAD WITH INDIVIDUAL AND OVERALL SHIELD, STEEL WIRE ARMOURED FIRE RESISTANT INSTRUMENTATION CABLE
EN 50288-7, 90°C / 500VFIRE RESISTANT CABLES
MULTI PAIR WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor area size
(mm2)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Dia. of Armour
Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
02PC2-A-FXFISSWHF XLPE 0.5 2 0.50 0.90 0.90 1.40 17.50 41004PC2-A-FXFISSWHF XLPE 0.5 4 0.50 1.20 1.25 1.50 21.00 68008PC2-A-FXFISSWHF XLPE 0.5 8 0.50 1.20 1.60 1.70 27.00 114010PC2-A-FXFISSWHF XLPE 0.5 10 0.50 1.20 1.60 1.70 29.50 131012PC2-A-FXFISSWHF XLPE 0.5 12 0.50 1.20 1.60 1.70 30.10 140024PC2-A-FXFISSWHF XLPE 0.5 24 0.50 1.30 2.00 1.80 40.00 240036PC2-A-FXFISSWHF XLPE 0.5 36 0.50 1.50 2.00 1.90 45.10 305002PC2-B-FXFISSWHF XLPE 0.75 2 0.60 1.10 0.90 1.50 19.80 52704PC2-B-FXFISSWHF XLPE 0.75 4 0.60 1.20 1.25 1.60 22.50 80008PC2-B-FXFISSWHF XLPE 0.75 8 0.60 1.30 1.60 1.80 29.50 136010PC2-B-FXFISSWHF XLPE 0.75 10 0.60 1.30 1.60 1.80 32.50 156012PC2-B-FXFISSWHF XLPE 0.75 12 0.60 1.30 1.60 1.80 33.50 167024PC2-B-FXFISSWHF XLPE 0.75 24 0.60 1.70 2.00 2.00 45.20 301036PC2-B-FXFISSWHF XLPE 0.75 36 0.60 2.00 2.50 2.20 52.50 431002PC2-C-FXFISSWHF XLPE 1.0 2 0.60 1.10 0.90 1.50 19.50 54004PC2-C-FXFISSWHF XLPE 1.0 4 0.60 1.20 1.25 1.60 23.50 84008PC2-C-FXFISSWHF XLPE 1.0 8 0.60 1.30 1.60 1.80 30.50 145010PC2-C-FXFISSWHF XLPE 1.0 10 0.60 1.30 1.60 1.80 33.50 161012PC2-C-FXFISSWHF XLPE 1.0 12 0.60 1.30 1.60 1.80 34.50 179024PC2-C-FXFISSWHF XLPE 1.0 24 0.60 1.70 2.00 2.00 46.50 326036PC2-C-FXFISSWHF XLPE 1.0 36 0.60 2.00 2.50 2.20 54.50 470002PC2-D-FXFISSWHF XLPE 1.5 2 0.60 1.20 1.25 1.60 22.10 72004PC2-D-FXFISSWHF XLPE 1.5 4 0.60 1.30 1.25 1.70 25.00 95008PC2-D-FXFISSWHF XLPE 1.5 8 0.60 1.50 1.60 1.90 32.50 168010PC2-D-FXFISSWHF XLPE 1.5 10 0.60 1.50 1.60 1.90 36.40 195012PC2-D-FXFISSWHF XLPE 1.5 12 0.60 1.50 1.60 1.90 37.50 205024PC2-D-FXFISSWHF XLPE 1.5 24 0.60 1.70 2.50 2.10 51.10 405036PC2-D-FXFISSWHF XLPE 1.5 36 0.60 2.00 2.50 2.40 58.30 520002PC2-E-FXFISSWHF XLPE 2.5 2 0.60 1.30 1.25 1.70 24.10 84004PC2-E-FXFISSWHF XLPE 2.5 4 0.60 1.40 1.25 1.80 28.00 127008PC2-E-FXFISSWHF XLPE 2.5 8 0.60 1.60 1.60 2.00 35.50 201010PC2-E-FXFISSWHF XLPE 2.5 10 0.60 1.60 1.60 2.00 40.10 259012PC2-E-FXFISSWHF XLPE 2.5 12 0.60 1.60 1.60 2.00 41.20 280024PC2-E-FXFISSWHF XLPE 2.5 24 0.60 1.80 2.50 2.20 55.70 495036PC2-E-FXFISSWHF XLPE 2.5 36 0.60 2.10 2.50 2.50 63.80 6500
12349 6 578
Illustrations correct?
![Page 84: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/84.jpg)
Page 83 Industrial Cables
MULTI TRIAD WITH INDIVIDUAL AND OVERALL SHIELD – WIRE ARMOURED CABLE – DIMENSIONS AND WEIGHTS
SCCItem Code
Insulation Material
Type
Conductor area size
(mm2)
No. of Elements
(Pair)
Insulation Thickness
(nom.) (mm)
Inner Jacket Thickness
(nom.) (mm)
Dia. of Armour
Wire (mm)
Jacket Thickness
(nom.) (mm)
Overall Diameter Approx.
(mm)
Net Weight Approx. (kg/km)
02TC2-A-FXFISSWHF XLPE 0.5 2 0.60 0.90 0.90 1.40 19.20 40304TC2-A-FXFISSWHF XLPE 0.5 4 0.60 1.20 1.25 1.50 23.00 80008TC2-A-FXFISSWHF XLPE 0.5 8 0.60 1.20 1.60 1.70 30.10 135010TC2-A-FXFISSWHF XLPE 0.5 10 0.60 1.20 1.60 1.70 33.20 156012TC2-A-FXFISSWHF XLPE 0.5 12 0.60 1.20 1.60 1.70 34.10 170024TC2-A-FXFISSWHF XLPE 0.5 24 0.60 1.30 2.00 1.80 45.30 297036TC2-A-FXFISSWHF XLPE 0.5 36 0.60 1.50 2.50 1.90 52.70 418002TC2-B-FXFISSWHF XLPE 0.75 2 0.60 1.10 1.25 1.50 22.20 71504TC2-B-FXFISSWHF XLPE 0.75 4 0.60 1.20 1.60 1.60 25.60 105008TC2-B-FXFISSWHF XLPE 0.75 8 0.60 1.30 1.60 1.80 33.60 161010TC2-B-FXFISSWHF XLPE 0.75 10 0.60 1.30 1.60 1.80 36.80 190512TC2-B-FXFISSWHF XLPE 0.75 12 0.60 1.30 2.00 1.80 38.70 224024TC2-B-FXFISSWHF XLPE 0.75 24 0.60 1.70 2.50 2.00 52.50 400536TC2-B-FXFISSWHF XLPE 0.75 36 0.60 2.00 2.50 2.20 60.20 533002TC2-C-2XISSWYu XLPE 1.0 2 0.60 1.10 1.25 1.50 23.00 76004TC2-C-2XISSWYu XLPE 1.0 4 0.60 1.20 1.60 1.60 56.80 115008TC2-C-2XISSWYu XLPE 1.0 8 0.60 1.30 1.60 1.80 34.40 174010TC2-C-2XISSWYu XLPE 1.0 10 0.60 1.30 1.60 1.80 38.80 231012TC2-C-2XISSWYu XLPE 1.0 12 0.60 1.30 2.00 1.80 40.10 248624TC2-C-2XISSWYu XLPE 1.0 24 0.60 1.70 2.50 2.00 54.60 444436TC2-C-2XISSWYu XLPE 1.0 36 0.60 2.00 2.50 2.20 62.60 584502TC2-D-2XISSWYu XLPE 1.5 2 0.60 1.20 1.25 1.60 24.60 85004TC2-D-2XISSWYu XLPE 1.5 4 0.60 1.30 1.60 1.70 28.70 131508TC2-D-2XISSWYu XLPE 1.5 8 0.60 1.50 1.60 1.90 37.15 206010TC2-D-2XISSWYu XLPE 1.5 10 0.60 1.50 2.00 1.90 42.15 267012TC2-D-2XISSWYu XLPE 1.5 12 0.60 1.50 2.00 1.90 43.50 290024TC2-D-2XISSWYu XLPE 1.5 24 0.60 1.70 2.50 2.10 58.45 511536TC2-D-2XISSWYu XLPE 1.5 36 0.60 2.00 2.50 2.40 67.25 681502TC2-E-2XISSWYu XLPE 2.5 2 0.60 1.30 1.60 1.70 27.50 117804TC2-E-2XISSWYu XLPE 2.5 4 0.60 1.40 1.60 1.80 31.45 158708TC2-E-2XISSWYu XLPE 2.5 8 0.60 1.60 2.00 2.00 41.35 278010TC2-E-2XISSWYu XLPE 2.5 10 0.60 1.60 2.00 2.00 46.05 324012TC2-E-2XISSWYu XLPE 2.5 12 0.60 1.60 2.00 2.00 47.40 351824TC2-E-2XISSWYu XLPE 2.5 24 0.60 1.80 2.50 2.20 64.25 632036TC2-E-2XISSWYu XLPE 2.5 36 0.60 2.10 2.50 2.50 73.25 8450
Note: 1.) For Tinned Copper conductor, simply replace “C2” to “T2” of the SCC ITEM CODE. 2.) Other conductor sizes and Pair/Triad counts are available upon request. 3.) Other jacket materials are available upon request. 4.) Standard Cutting length 1000m ± 5%, other lengths are on request.
![Page 85: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/85.jpg)
Page 84Industrial Cables
CERTIFICATION
![Page 86: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/86.jpg)
Page 85 Industrial Cables
CERTIFICATION
![Page 87: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/87.jpg)
Page 86Industrial Cables
![Page 88: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/88.jpg)
Page 87 Industrial Cables
CERTIFICATION
![Page 89: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/89.jpg)
Page 88Industrial Cables
![Page 90: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/90.jpg)
Page 89 Industrial Cables
![Page 91: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/91.jpg)
Page 90Industrial Cables
CABLE HANDLING AND STORAGE GUIDELINES
The purpose of this document is to provide proper guidelines for transportation, handling and storage of cables and cable reels. Cables not handled properly may lead to damage. Any such damage may alter or degrade the cable characteristics.
K E E P I N G T H E R E E L U P R I G H T :The reel should be handled in upright position with proper stops as shown below.
Proper stops must be fitted to avoid the reels from rolling.
R O L L I N G T H E R E E L S :If reels are to be rolled, they should be rolled in the direction of the arrow on the reel as shown below. Rolling reels in the opposite direction may cause the cable to become loose and cause difficulty in installation. The reel should never be dragged or pushed even for short distances as the flange of the reel may break or get damaged.
L I F T I N G T H E R E E L F O R L O A D I N G / U N L O A D I N G :When lifting the reel from above with a crane or other lifting device, a spreader bar must be used above the reel to prevent inward pressure on the top of the reel flanges. The proper technique is shown below.
![Page 92: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/92.jpg)
Page 91 Industrial Cables
It should be properly be ensured that the reel is properly hoisted and balanced.
If the reel is lifted by forklift, then approach the reel from the flange side. Position the forks such that the reel is lifted by both reel flanges. Do not allow the lift forks to contact the cable.
T R A N S P O R T A T I O N :During transportation, the reel should be fastened to the base through the center hole or across the flanges with wires or ropes.
To prevent the movement of reels, a combination of wedges/stops and proper support should be used and tied down front and rear as shown below. Reels should never be stacked onto one another.
S T O R A G E :Cable reels should be stored on hard surfaces resting on the flange edge as shown below. The area chosen for storage of cable reels must be level and dry to avoid moisture entry, and protected from sunlight if stored for longer time. A minimum distance of 30cm must be kept between each reel to avoid damage to the cable ends (End Caps). If a portion of the cable is used, the open end of the cable remaining on the reel should immediately be re-sealed in a manner equivalent to the factory seal to prevent the entrance of moisture.
![Page 93: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/93.jpg)
Page 92Industrial Cables
![Page 94: INDUSTRIAL CABLES CATALOGUE...2016/03/01 · locations class I and class II division 2 acc. to NEC 501-4(b) and NEC 502-4(b), not allowed for direct connection to low impedance sources,](https://reader036.fdocuments.us/reader036/viewer/2022081620/610429bd2d277757f90ca2f0/html5/thumbnails/94.jpg)
Head Office
Riyadh
Al-Khobar
Innovation, Commitment, Appreciation, Respect and Excellence W www.saudicable.com
P.O Box 4403, Jeddah 21491
P.O Box 6793, Riyadh 11452
P.O Box 2449, Al-Khobar 31952
T +966 12 608 7666
T +966 11 464 9080
T +966 13 887 5818
F +966 12 608 2864
F +966 11 464 4148
F +966 13 887 5818