Industrial - wwiggins.co.nz · breaking force warp/weft 1290n / 1000n (as 2001.2.3) tear strength...

Industrial

27Page 127

Industrial | Canvas

Loomstate

Pack Duck

100% cotton canvas straight off the loom hence the name “loomstate”. A natural cotton colour and comes in four weights. 8oz, 10oz, 12oz and 14oz. Ideal for promo bags, bank bags, artist sheets, dust covers, filter bags etc. Roll Width is 183cm/72” and roll length usually between 40-60 metres

Packduck Canvas is a proofed cotton canvas. Because Packduck Canvas is 100% cotton, shrinkage will occur when water is applied to the canvas.

For higher quality jobs it is recommended to use a Poly/Cotton blended canvas like our Supaproof range.

Packduck Canvas is ideal for jobs such as swag bags, tool bags, econo-horse covers, loose fit tarpaulins etc.

TECHNICAL SPECIFICATIONS

WEIGHT 8oz 10oz 12oz 14oz

WIDTH 183cm 183cm 183cm 183cm

BASE CLOTH 100% Cotton 100% Cotton 100% Cotton 100% Cotton 2/24 x 1/8 2/10 x 1/10 2/10 x 2/10 2/10 x 3/10

WEAVE 68 x 38 Threads 44 x 32 Threads 44 x 32 Threads 48 x 28 Threads

FABRICATION METHODS Sewing

FABRIC CARE OFPANZ Care Label OF-3


WIDTH 183cm

WEIGHT 15oz Raw Loomstate (Approx 18oz finished Proofed weight)

BASE CLOTH 100% Cotton (finished with waterproof coating)

WEAVE 2/10 x 3/10 48 x 28 Threads

SHRINKAGE Shrinkage will occur when water is applied



GREEN BLACKOLIVE NAVY

Jute100% natural woven fibre derived from Asia. Ideal for sack bags, horse covers, cow covers, bitumen covers etc. 36”/91cm wide and weight is 20oz/650gsm. Roll lengths are approx 100 metres.

Industrial | Canvas

6oz supaproof® Poly/Cotton CanvasTECHNICAL SPECIFICATIONS

WIDTH 205cm

WEIGHT Loomstate 220gsm (6.5oz) Proofed 318gsm (9.4oz) +/- 30gsm

BASE CLOTH 65% Polyester / 35% Cotton

SHRINKAGE 2% - Warp

BREAKING FORCE Warp/Weft 1290N / 1000N (AS 2001.2.3)

TEAR STRENGTH Warp/Weft 40N / 32N (AS 2001.2.10)

HYDROSTATIC HEAD 1244.5mm (AS2001.2.17)

CONE TEST 0ml (24 Hours)

U/V STABILITY 5 Years



GREY BEIGEMAROON DARK GREENLIGHT GREYDARK NAVY

NAVY

LIGHT SAND

Supaproof® 6 is a light-weight (6.5oz basefabric, 9.4oz finished) premium finely woven 65/35 polyester/cotton specially engineered and impregnated utilizing the DDP Defab Duraproof Process.

Quality and weight balance is guaranteed with Supaproof® 6. Supaproof® 6 is tailored for very specific applications namely light-weight tent roofs & walls, awnings, flyovers and camper trailer walls and roofs.

• UV resistant• Water proof• Mildew resistant• Dimensionally stable

(shrinkage resistance)• Wide colour range selected

for the Australian and New Zealand market

• Defab Duraproof Process

Industrial | Canvas


WIDTH 205cm

WEIGHT Loomstate 293gsm(8oz) Proofed 394gsm (11oz) +/- 30gsm


MAXIMUM SHRINKAGE 2% - warp



HYDROSTATIC HEAD 1244.5mm (AS 2001.2.17)

CONE TEST 0ml (24 hours)




BLACK

DARK NAVY

ANTELOPE

MAROON

OLIVE

LIGHT GREY

BRUNSWICK GREEN

LIGHT SAND

DARK GREEN

KHAKI

NAVY

GREY BEIGE

Supaproof® 8 is a light -medium weight (8oz basefabric, 11oz finished) premium 65/35 polyester/cotton general purpose proofed canvas woven in Australia and impregnated utilizing the DDP Defab Duraproof Process.

Supaproof® 8 is highly breathable and is guaranteed to provide superior performance in the most arduous environmental conditions. The fabric demonstrates no crease whitening in fabrication assisting with end use applications and performance properties.

Supaproof® 8 is ideally suitable for annexe roofs and walls, camper trailer roofs, walls and caravan awnings, retractable covers, bags, satchels and loose covers.

• UV resistant• Water proof• Mildew resistant• Dimensionally stable (shrinkage resistance)• Wide colour range selected for the Australian

and New Zealand market• Defab Duraproof Process

Industrial | Canvas


WIDTH 205cm

WEIGHT Loomstate 380gsm(12oz) Proofed 530gsm (15oz) +/- 30gsm


MAXIMUM SHRINKAGE 2.5% - warp



HYDROSTATIC HEAD 1111.50mm (AS 2001.2.17)

CONE TEST 0ml (24 hours)




Supaproof® 12 is a medium weight (12oz basefabric, 15oz finished) two-fold warp and weft polyester/cotton waterproof general purpose proofed canvas woven in Australia and impregnated utilizing the DDP Defab Duraproof Process.

Supaproof® 12 is ideally suitable for general applications including supported covers, awnings, annexe roofing and walls, trailer covers, campervan roofs and walls, stall covers, swags, hats, bags and tent walls and roofs, agriculture covers and ground sheets.

• UV resistant• Water proof• Mildew resistant• Dimensionally stable (shrinkage resistance)• Wide colour range selected for the Australian

and New Zealand market• Defab Duraproof Process

BLACK

DARK NAVY

ANTELOPE

MAROON

OLIVE

LIGHT GREY

BRUNSWICK GREEN

LIGHT SAND

DARK GREEN

KHAKI BEIGEGREY

NAVY

Industrial | Canvas

Camperfield® Annexe Awning CanvasTECHNICAL SPECIFICATIONS

WIDTH 220cm

COMPOSITION 100% Polyester

MASS 350gsm

MAXIMUM SHRINKAGE 3% - warp

TENSILE STRENGTH Warp/Weft 2300N / 1700N (AS 2001.1.2)


HYDROSTATIC HEAD 2039mm (20kPa)

LIGHT FASTNESS 7-8



When outdoor protection needs to be capable of handling the roughest and toughest a sunburnt country has to offer, Camperfield® offers external protection fabrics for caravan annex walls and fixed awnings that are the strongest, most durable available in the market.

22704

22501

22511

22526

22553

22709

22503

22512

22547

22555

22728

22509

22516

22549

22731

22510

22522

22551

• Woven from 100% high strength polyester yarns• Woven and finished in Australia for Australian and New Zealand conditions• 100% blockout from the suns harmful UV rays• UV resistant• Highly rot, mould, mildew and water resistant• Available in a range of balanced back coating in both light sand and grey backing

Industrial | Canvas

tearlok® Bison II

tearlok® Bison II is an incredibly high strength heavy weight 100% core spun canvas fabric, with a two way rip stop woven construction with a square design grid.

tearlok® Bison II is manufactured using the superior DDP (Defab Duraproofing Process) coupled with the latest advancements in weaving technology. When outdoor protection needs to adjust to constantly altering weather, road or terrain conditions, Bison II guarantees a canvas that will ensure protection from the toughest and the most arduous conditions (18oz proofed).

tearlok® Bison II is ideal for applications such as heavy duty long haul road transport tarpaulins, utility and 4WD covers, heavy duty horse rugs & blankets, industrial covers & curtains, shipping /rail transport covers.


WIDTH 205cm

WEIGHT 615gsm

BASE CLOTH 52% Polyester / 48% Cotton (100% Corespun-Ripstop)

SHRINKAGE Warp/Weft 1.6% / 0.3%



HYDROSTATIC HEAD >122mbar / 12.2kpa / 1220mm (AS2001.2.17)

CONE TEST 0ml (24 Hours) (AS 20014.2.18)


RUB FASTNESS Dry 4/5—Wet 4/5 (AS 2001.4.3)



ROYAL ANTELOPE SLATE BLACK

Key Benefits:• Guaranteed 5 years• Environmentally friendly• Easy to care and maintain

Key Features:

• Australian Made

• High Tear resistance /Highly abrasive resistant two way Rip Stop Construction

• Highly waterproof /Superior hydrostatic water resistance

• Completely breathable /Guaranteed not to sweat

• Exclusive DDP (Defab Duraproofing Process)

• Dimensionally Stable /Shrinkage resistance

• Mould, Rot and Mildew Resistant

• Crease Whitening Resistant /Optimum fabric colour fastness

• Maximum UV Stability /Effective light and heat control

Industrial | Canvas

ROYAL ANTELOPE SLATE BLACK

tearlok® boulder

tearlok® Boulder is a medium weight 52/48 polyester cotton proofed canvas fabric with a tearlok square (ripstop) construction made of high tensile corespun yarn, to give it additional tear and tensile strength.

tearlok® Boulder is engineered using the DDP (Defab Duraproofing Process) coupled with the latest advancements in weaving technology. (12oz loomstate / 15oz proofed)

tearlok® Boulder is tailored for a myriad of medium to heavy weight applications including, fixed frame canopies, trailer, utility and 4WD covers, machinery covers, industrial curtains/partitions, temporary fabric structures, hire tarpaulins, heavy duty seat covers, horse and livestock covers and rugs and general canvas goods.


WIDTH 205cm

WEIGHT 550gsm

BASE CLOTH 52% Polyester / 48% Cotton (Corespun-Ripstop Thread Only)

SHRINKAGE Warp/Weft 0.33% / 0.33%



HYDROSTATIC HEAD >300mbar / 30kpa / 3000mm (AS2001.2.17)

CONE TEST 0ml (24 Hours) (AS 20014.2.18)


RUB FASTNESS Dry 4/5—Wet 4/5 (AS 2001.4.3)



Key Benefits:• Guaranteed 5 years

• Environmentally friendly

• Easy to care and maintain

Key Features:• Australian Made

• Highly waterproof (Superior hydrostatic water resistance)

• Completely breathable /Guaranteed not to sweat

• Exclusive DDP (Defab Duraproofing Process)

• Dimensionally Stable /Shrinkage resistance

• Mould, Rot and Mildew Resistant

• Crease Whitening Resistant /Optimum fabric colour fastness

• Maximum UV Stability /Effective light and heat control

Industrial | Canvas

SLATE GREY BLACK

MX Canvas

MX CANVAS is a blended Polycotton Canvas purposely designed for use as an automotive aftemarket seat cover material.

Used extensively by Farmers and Tradies to protect the original seat covers from wear and tear.

Available in:

8oz and 12oz weights.


WIDTH 203cm

WEIGHT 380gsm

BASE CLOTH 65% Polyester / 35% Cotton 2/20 x 2/20

MAXIMUM SHRINKAGE 2% Warp 0.4% Weft

TENSILE STRENGTH Warp/Weft 1981N / 1177N (AS2001.2.3)

TEAR STRENGTH Warp/Weft 59N / 42N (AS2001.2.10)

HYDROSTATIC HEAD 740mm (AS 2001.2.17)

CONE TEST 0ml / 24 hours (AS2001.2.18)

SPRAY RATING 80% (AS2001.2.16)

LIGHT FASTNESS 7/8 (AS2001.4.21)




Industrial | PE

WHITE

WHITE

NATURAL

BLUE/SILVER

BLUE

BEIGE OLIVE

Genlene Budget

Genlene Premium

GENLENE BUDGET is an economically priced polyethylene coated fabric.

GENLENE BUDGET is a suitable fabric for Ground sheets, Construction drop sheets, packaging, pattern making and various economical covers.

Because it is economically priced it is ideal for those one off throw away covers or protective sheets

GENLENE PREMIUM is an economically priced polyethylene coated fabric.

GENLENE PREMIUM is a suitable fabric for Ground sheets, Tent floors, Construction drop sheets, packaging and various economical covers.


WIDTH 183cm

WEIGHT 150gsm

BASE CLOTH 1000 Denier

WEAVE 12 x12

U/V STABILITY 1 Year minimum

FABRICATION METHODS Hot Wedge, Hot Air Welding & Sewing

FABRIC CARE OFPANZ care label OF-1


WIDTH 183cm

WEIGHT 150gsm


WEAVE 12 x12




Industrial | PE

WHITE WHITE/SILVER GREEN BLUE

LiteCover

LITECOVER is a high grade PE Polyethylene coated fabric, Litecover has good yarn uniformity with minimal distortion.

LITECOVER is recommended for “STATIONARY” covers such as Fixed Frame Covers, Boat storage covers, Stack covers, Ground sheets, Building tarps etc.


WIDTH 205cm All Colours / 366cm Silver White only

WEIGHT 250gsm


WEAVE 14 x 14

COATING 50 Micron face and back

TEAR STRENGTH Warp/Weft 270 / 260 N JIS1096C

TENSILE STRENGTH Warp/Weft 1500 / 1450 N JIS1096A


FLEXING 200,000 cycles minimum

FABRICATION METHODS Hot Wedge, Hot Air welding & Sewing


Industrial | PE

WHITEGREEN BLUEOLIVE

Maxlite

MAXLITE is a wide width premium polyethylene coated fabric woven on sultzer looms. This allows for maximum yarn uniformity and no moisture for best adhesion and U/V efficiency.

MAXLITE has recently been improved using Metallocene Polyethylene (mPE) resins which allow for easier welding and greater resistance to Water Capilary.

MAXLITE is an ideal fabric for large cost effective static covers, e.g. Haycovers, Boat Storage Covers, Fumigation covers and other stationary Tarpaulins.


WIDTH 366cm

WEIGHT 285gsm


WEAVE 14 x 14








9

Industrial | PE

Maxspan

Solarpro

MAXSPAN is a super strength wide width 366cm high grade PE coated fabric woven on the Sultzer loom.

This allows for ideal yarn uniformity with minimal, if any, distortion, and no moisture for best adhesion.

MAXSPAN is highly recommended for Fixed Framed Roof Structures and Stationary Covers.x

Solarpro is a high grade translucent polyethylene primarily for the horticulture market.

Solarpro will allow 85% light transmission to filter through therefore giving it a real greenhouse effect.


WIDTH 366cm

WEIGHT 320gsm


WEAVE 16 x 16 (Double layer 8 x 8)








WIDTH 183cm & 270cm

WEIGHT 180gsm


WEAVE 10 x 10

U/V STABILITY 5 Year Limited



WHITE/SILVER GREEN

0

Industrial | PE

Alumi/Black

PE 366

ALUMI/BLACK PE is a high grade Polyethylene coated fabric.

ALUMI/BLACK PE is a two toned fabric, Black on the underside with an Aluminium Foil coating on the topside.

The Aluminium Foil offers an excellent heat refelective surface making it ideal for produce bin covers, surfboard covers or any other cover that requires the heat to be reflected away.

Because the aluminium coating is not hot air weldable there is a 30mm strip on one egde of the material with no aluminium coating to allow the joining of another sheet.

PE 366 is a medium grade polyethylene coated fabric with good yarn uniformity.

PE 366 is recommended for static covers such as Boat Storage covers, Stack Covers,Ground Sheets, Fumigation covers etc.


WIDTH 180cm + 30mm weldable edge

WEIGHT 190gsm

BASE CLOTH 1000 Decitex HDPE

WEAVE 10 x 10

COATING 40 Micron face and back LDPE




FABRICATION METHODS Hot Wedge, Hot Air welding on edge seam & Sewing



WIDTH 366cm

WEIGHT 280gsm


WEAVE 16 x 16




WHITEBLUE

Industrial | Polyester

Industrial | PE

PE Repair Tape

CAMOUFLAGE PU

PE Repair Tape is uniquely designed for repairing Polyethylene material.

PE Repair Tape is a translucent tape allowing the colour of the PE you cover to show through giving an almost invisible repair.

Simply cut to length and stick over a tear to repair.

Available in:

50mm Wide x 20m length

100mm Wide x 20m length


WIDTH 150cm

WEIGHT 320gsm

BASE CLOTH 100% Polyester 600d x 600d

COATING PVC Coating on underside

WATERPROOFNESS 100%

U/V STABILITY 1 Year




WIDTH 150cm

WEIGHT 430gsm

BASE CLOTH 100% Polyester 900d x 900d

COATING PU Coating on underside

WATERPROOFNESS 800mm (AATCC 127)

U/V STABILITY 1 Year



NAVYBLACK

CAMOUFLAGE PU is a 900d Polyester with a “Jungle Green” Camouflage print.

CAMOUFLAGE PU has a 800mm PU coating for high water resistance making it an ideal choice for Gun Bags and Gear Bags.

Cortex is a durable woven Polyester fabric with a PVC backing for luggage and bag manufacturing.

NOTE: Cortex should not be used for outdoor covers.

Industrial | Polyester

Commander

Commander is a Solution dyed U/V stabilised Polyester fabric with a 1000mm PU backing for high water repellancy.

Commander is a durable light weight choice for boat covers, storage covers, furniture covers etc.


WIDTH 200cm

WEIGHT 240gsm

BASE CLOTH 100% Solution Dyed Polyester

COATING PU Coating on underside

WATERPROOFNESS 1000mm minimum (AATCC 127)

TEAR STRENGTH Warp/Weft 76 / 67N

ABRASION RESISTANCE 20,000 cycles (Martindale ISO 12847-2)

U/V STABILITY 3 Year Limited

COLOUR FASTNESS 4/5 (AATCC 16E)



LIGHT GREY NAVY BLACKMARINEBEIGE CHARCOAL

Industrial | PVC

Clear Pvc No F/R 0.3Mm

Clearview

Our Clear PVC 0.3mm is a lightweight clear suitable for small jobs like clear site file pockets to protect documents or for wall pocket storage etc.

Note: Clear PVC 0.3mm is not F/R (refer to Genclear for F/R quality)

CLEARVIEW is a Calandered Clear PVC.

CLEARVIEW is ideal for vertical screening. (Note: Clearview has no F/R additive, refer to Genclear for F/R quality)

Available 150cm wide in the following thicknesses: 0.70mm


WIDTH 127cm

THICKNESSES 0.3mm

U/V STABILITY 2 Years minimum / QUV 500hours

SHRINK RATE 4% Warp / 2% Weft (approximate only)

FIRE RETARDANT N/A

FLEXING 200,000 cycles minimum AS-1441.6

COLD CRACK -9°C

FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive



WIDTH 150cm

THICKNESSES 0.7mm

U/V STABILITY 2 Years minimum

SHRINK RATE 4%


COLD CRACK -9°C



Industrial | PVC

Genclear F/R

Tigertint F/R

GENCLEAR is a Calandered Clear PVC with added Fire Retardancy for your safety.

Available 150cm wide in the following thicknesses: 0.5mm, 0.70mm, 1.0mm

Tigertint is a Smoke Grey tinted Clear PVC ideal for reducing glare and creating privacy.


WIDTH 150cm

THICKNESSES 0.5mm / 0.7mm / 1.0mm


SHRINK RATE 4% Warp / 2% Weft (Approximate Only)

FIRE RETARDANT AS/NZS1530.2 / ASTM-D568

FLEXING 200,000 cycles minimum AS-1441.6

COLD CRACK -9°C




WIDTH 150cm

THICKNESSES 0.7mm


SHRINK RATE 4%

FIRE RETARDANT AS1530.2 / ASTM-D568


COLD CRACK -9°C



Industrial | PVC

Achilles Japan 3S

ACHILLES JAPAN 3S is a calandered Clear PVC with a double polished finish.

ACHILLES JAPAN 3S is an ideal clear PVC for vertical screening.

Available 137cm wide in the following thicknesses:

0.50mm x 30m roll

0.75mm x 25m roll


WIDTH 137cm


SHRINK RATE 2% - 4% approx.

THICKNESSES 0.5mm 0.75mm

TEAR STRENGTH 36.8N Warp / 36.7N Weft 61.6N Warp / 61.4N Weft

TENSILE STRENGTH 142N Warp / 126N Weft 183.6N Warp / 167.7N Weft

COLD CRACK -25°C



Industrial | PVC

AK 520

AK 520 PVC is an economically priced medium weight PVC coated Polyester material.

AK 520 should not be used for permanent exposure outdoors, the principal end use for AK 520 PVC is for Gym Mats, Tackle Pads, Mattress Covers, internal machinery covers etc.


WIDTH 205cm

WEIGHT 520gsm

BASE CLOTH Polyester 550 Decitex

WEAVE 8 x 8 per cm

COATING PVC paste coated

SURFACE FINISH Satin Face

TEAR STRENGTH Warp/Weft 250 / 200 N

TENSILE STRENGTH Warp/Weft 1100 / 840 N/ 5cm

U/V STABILITY 2 year minimum

FIRE RETARDANT N/A

ADHESION 75 N per 2.5cm


TEMPERATURE RANGE -30 / +70 degC



ROYAL BLUE

Industrial | PVC

Allcover

Allcover is a quality mid-range PVC and is ideal for gym mats, punch bags, tackle bags and so much more.


WIDTH 205cm

WEIGHT 620gsm


WEAVE 8 x 8 per cm


SURFACE FINISH High Gloss Lacquer




ADHESION 75 N per 5cm





ROYAL BLUE BLACK MATT BLACK FLUORO YELLOW

Industrial | PVC

Genlon 400

GENLON 400 is a woven polyester fabric with a flexible PVC coating on both sides.

GENLON 400 is an ideal fabric for banners, lightweight covers, aprons, sport and promotional products etc.


WIDTH 183cm

WEIGHT 480gsm


WEAVE 9 x 9 per cm

COATING PVC laminate coated

SURFACE FINISH Gloss finish



U/V STABILITY 2.5 year minimum

FIRE RETARDANT N/A






WHITE

HIVIS ORANGE

GREY YELLOWBLUE BLACK RED DARK GREEN

Industrial | PVC

Genlon 600

GENLON 600 is a high quality PVC coated polyester fabric with a superior flexible PVC coating on both sides.

GENLON 600 is a very versatile PVC commonly used for boat covers, fixed frame awnings, banners and other medium weight cover requirements.


WIDTH 205cm

WEIGHT 600gsm


WEAVE 8 x 8 per cm


SURFACE FINISH High Gloss ROWACRYL protective finish




FIRE RETARDANT N/A






WHITE

GREY

ROYAL BLUE NAVY BLUE BLACK

DARK GREEN YELLOWDARK GREY BEIGE ORANGE RED

Industrial | PVC

Covertex F/R

Covertex is a woven polyester fabric with a flexible PVC coating on both sides.

Covertex is a very versatile PVC making it an ideal choice for many applications such as tarpaulins and general covers, banners, gym mats, and with the added bonus of being FIRE RETARDANT.


WIDTH 250cm

WEIGHT 650gsm


WEAVE 8 x 8 per cm

COATING PVC Blade/Knife coated

SURFACE FINISH Acrylic protective finish




FIRE RETARDANT AS1530.2

ADHESION >100 N per 5cm

TEMPERATURE RANGE -30 / +70 deg C



WHITE 9003 RED 3002 BLUE 5002YELLOW 1003

ALUMINIUM R7038SBLACK 9005

GREEN 6005 LIGHT GREY 7004 DARK GREY 6023

Industrial | PVC

Polystar Premium

Polystar Premium is a woven polyester fabric with a flexible PVC coating on both sides.

Polystar Premium is a very versatile PVC making it the ideal choice for medium weight covers and tarpaulins and with a wide width of 250cm fabrication cost can also be kept to a minimum. (note: White also available at 300cm)


WIDTH 250cm all colours / 300cm White only

WEIGHT 720gsm

BASE CLOTH Polyester 1100 Denier / 1220 Decitex

WEAVE 8 x 8 per cm



TEAR STRENGTH Warp/Weft 490/430 N



FIRE RETARDANT AS/NZS 1530.2






YELLOW

KELLY GREEN

RED

WHITE

LIGHT BLUE

LEMON YELLOW

ROYAL BLUE EMERALD GREEN

ORANGE CANDY RED

DARK GREEN LIGHT GREY

BEIGE

DARK GREY

BLACK

Industrial | PVC

Express 900

EXPRESS 900 is a superwide PVC coated Panama weave polyester.

EXPRESS 900 is traditionally made for the truck side curtain market but also finds its way into heavy covers and screens.


WIDTH 330cm

WEIGHT 900gsm

BASE CLOTH Polyester 2 x 1100 Decitex

COATING PVC Paste Coated

SURFACE FINISH High Gloss ROWACRYL protective finish face and back






TEMPERATURE RANGE -30º/+70ºC



WHITE 900

Industrial | PVC

Sauleda Panama

A high quality and durable Panama woven PVC coated textile. Whilst specifically designed for the fabrication of Truck Curtainsider panama has also been used when the need for a heavy and/or durable cover is required.


WIDTH 300cm

WEIGHT 900gsm

BASE CLOTH Polyester AT 1100 Decitex

SURFACE FINISH Lacquered Face and Back








YELLOW 1003

WHITE 6396

RED 3020

MID BLUE 5005 COBALT 5002

GREEN 6026ORANGE 2004

LIGHT BLUE 5015 ROYAL 5010

RED 3002

NAVY 5013

DARK GREEN 6938

GREY 7038

BLACK 6949

Industrial | PVC

Suntex Translucent

SUNTEX is a translucent PVC fabric for Structures, Shade Sails and Awnings that request higher light transmission and UV blocking.

SUNTEX’s surface contains a PVDF treatment which allows for less contamination on the surface and higher Durability, Weatherability and Ease of Cleaning.

• Excellent UV Blocking

• 45% Light Transmission

• Superior Durability and Weatherability

• Hot Air /Hot Wedge / HF Weldable


WIDTH 204cm

WEIGHT 800gsm

BASE CLOTH Polyester 833 Decitex 150TPM Anti Wicking

WEAVE 8 x 8 per cm


SURFACE FINISH Top: PVDF Back: Acrylic Lacquer

TEAR STRENGTH Warp/Weft 380 / 445 N ASTM D751

TENSILE STRENGTH Warp/Weft 2090 / 2010 N/ 5cm ASTM D751

U/V STABILITY 10year Limited

ADHESION 107 N per 5cm ASTM D751

LIGHT TRANSMISSION 45%

U/V BLOCKING UV-R 98.4% KS K 0850:2014

UV-A 98.0% KS K 0850:2014

UV-B 99.9% KS K 0850:2014

FIRE RETARDANT AS1530.2 (FI Index =1) / CPAI-84




Industrial | PVC

Tarpstop Ripstop™

Tarpstop RipstopTM is a woven polyester ripstop weave with a flexible PVC coating on both sides.

Tarpstop RipstopTM is ideal for heavy duty tarpaulins and transport covers


WIDTH 205cm

WEIGHT 670gsm


WEAVE 9 x 9 per cm / Ripstop 1.5 x 1.5 per cm




TENSILE STRENGTH Warp/Weft 2800 / 2300 N


FIRE RETARDANT N/A






LIGHT BLUE ROYAL BLUE EMERALD GREEN DARK GREEN

WHITE COBALT BLUE

GREY YELLOWRED

Industrial | PVC

Durastop Ripstop

DURASTOP RIPSTOP is a woven polyester ripstop weave with a PVC coating on both sides.

DURASTOP RIPSTOP is ideal for heavy duty tarpaulins, transport covers, roll over bin covers, hire tarps and general PVC covers.


WIDTH 250cm

WEIGHT 670gsm


WEAVE 9 x 9 per cm / Ripstop 1.7 x 1.7 per cm

COATING Spread/Blade Coated

SURFACE FINISH High Gloss Acrylic protective finish




FIRE RETARDANT N/A






WHITE 9003 YELLOW 1003 RED 3002 GREEN 6005 BLUE 5002 DARK GREY 7016LIGHT GREY 7004

Industrial | PVC

Trident Premium Ripstop™

Trident Premium RipstopTM is a premium woven polyester ripstop weave fabric with a superior flexible PVC coating on both sides.

Trident Premium RipstopTM is a superior Ripstop PVC making it the first choice for heavy duty covers where quality, strength and durability are prime requirements.


WIDTH 205cm

WEIGHT 690gsm


WEAVE 9 x 9 per cm / Ripstop 1 x 1 per cm






FIRE RETARDANT N/A






LIGHT GREEN

NAVY BLUE

DARK GREEN

BLACKLIGHT BLUE

GREY

ROYAL BLUE

DARK GREY

WHITE

YELLOW ORANGE RED

Industrial | PVC

Widestop Ripstop™

Widestop RipstopTM is an extension of our Trident Ripstop product PVC coated Polyester ripstop yarn. And with an impressive width of 330cm will help minimise the need for extra fabrication time.

Widestop ripstopTM is ideal for heavy duty Tarps and Covers and especially good for roll over bin covers where the extra width allows for no joins.


WIDTH 330cm

WEIGHT 690gsm


WEAVE 9 x 9 per cm / Ripstop 1 x 1 per cm






FIRE RETARDANT N/A






ROYAL BLUE DARK GREENWHITE

Industrial | PVC

Vertex

Vertex is a reinforced translucent PVC designed for vertical screening whilst continuing to maximise the amount of light transferring through.

Vertex is a wide 250cm with a ripstop weave pattern for additional tear resistance.


WIDTH 250cm

WEIGHT 560gsm


WEAVE 3.5cm x 3.5cm Ripstop

COATING Clear PVC paste coated









Industrial | Mesh

Breezeway

Breezeway Extra

BREEZEWAY is a PVC coated mesh ideal for replacing outdoor furniture mesh, bottom panels on Marine squabs, breather panels on gym mats and so much more.

Available in Black and White.

BREEZEWAY EXTRA is a 2500mm wide durable PVC coated Polyester Mesh ideal for Truck Debris covers, Sandpit covers, bottom panel on marine squabs and much more.

Available in Black only.


WIDTH 137cm

WEAVE 16 x 12


COATING PVC



FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing



WIDTH 250cm

WEAVE 16 x 12


COATING PVC



FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing


Industrial | Mesh

Ferrari® 392 Mesh

Ferrari® 492-S2 Mesh

FERRARI 392 MESH is a multi-purpose heavy duty PVC coated polyester mesh ideal for architectural screens, separation screens, stock crate covers, enclosure pens etc.

Available in: Black

Ferrari’s exclusive Précontraint® technology holds the textile under tension in both warp and weft directions throughout the manufacturing process, ensuring higher levels of dimensional stability and tensile strength, less elongation and a flatter base cloth.

This enables a more substantial protective coating to be placed on top of the yarn without increasing overall thickness, creating a flatter, lighter textile subject to less deformation under tension. The finished textile delivers exceptional levels of strength and longevity.

Précontraint 492-S2 is suitable for a wide variety of applications ranging from catamaran trampolines to outdoor shade structures. Finished on both sides with a weldable acrylic lacquer for protection and ease of fabrication, the textile offers resistance to weathering, strength and reliability in an attractive, open mesh.


WIDTH 180cm

WEIGHT 820gsm

BASE CLOTH Polyester HT 1100 Decitex

SURFACE FINISH PVC Coating





POROSITY ± 27%

WIND EFFICIENCY 81%

FLAME RETARDANCY M2/NFP 92-507 • TEST 2/NFPA 701 • CSFM T19 • B1/DIN 4102-1 • G1/GOST 30244-94 • M2/UNE 23.727 •VKF 5.3/SN 198898 • Schwerbrennbar Q1-Tr1/ONORM B 3800-1





WIDTH 180cm

WEIGHT 1050gsm

BASE CLOTH Polyester HT 3300 Decitex

SURFACE FINISH Formula S fluorinated varnish weldable





POROSITY ± 31%

WIND EFFICIENCY 78%

FLAME RETARDANCY M2/NFP 92-507 • B1/DIN 4102-1 • G1/GOST 20244-94




Available in: White

Industrial | Mesh

Trampoline Mesh

Trampoline Mesh Fabric is a 100% woven polypropylene mesh.

Available in:197cm wide Black & Blue394cm wide Black & Blue


WIDTH 197cm & 394cm

WEIGHT 270gsm

BASE CLOTH 100% Polypropylene

FINISH Tentered & Calendered

TENSILE STRENGTH Warp/Weft 2201N / 1934N (ASTM D-4632 GRAB METHOD)

TEAR STRENGTH Warp/Weft 836N / 822N (ASTM D-4533)

BURST STRENGTH 825 PSI (ASTM D 3786)

PUNCTURE RESISTANCE 190 lbs / 86kgf (ASTM D 4833)

ABRASION RESISTANCE 95% Strength Retained at 5000 Hrs (ASTM D 4886)

U/V STABILITY 75% Strength Retained at 5000 Hrs (ASTM D G154)


BLACK BLUE

Tex Mesh

A wide open mesh allowing plenty of visibility.

Ideal for fixing as protective Bird netting in and around milking sheds whilst still allowing for plenty of natural light through.

Note: Tex Mesh MUST only be installed as a FIXED mesh installation.

This product is not suitable for high abrasion applications i.e Transport covers etc

Colour: Black


WIDTH 250cm

WEIGHT 210gsm

BASE CLOTH Polyester 2200 x 2200 dTex (2 x 1100 dTex)

WEAVE 6 x 6 per cm Knitted

COATING PVC coated




TEMPERATURE -30 / +70

FABRICATION METHODS High Frequency Welding: Sewing


Industrial | Mesh

I-Mesh

Non Slip Matting Per Mesh

I-MESH is a revolutionary way to eyelet material.

I-MESH is a knitted Polyethylene with a breaking force of 195kg (Much stronger than a conventional eyelet).

I-MESH is folded in half over the fabric and sewn into place offering multiple tie off points along your fabric.

Ideally suited for Tarps, Debris Covers, Sandpit Covers and so much more.

Colour: Black

NON SLIP MATTING PER MESH is a Phthalate free Non-Slip expanded foam mesh ideal for use on boats, caravans and camping as a non slip surface.

Because NON SLIP MATTING PER MESH is free of heavy metals it is also ideal to use around areas such as Hospitals, preschools, dental surgery and any applications involving food.

Standards Reached:

“OEKO-TEX” European environmental protection certificate -class-1, BABY use grade.

“ROHS” regulation (directive 2002/95/EC)

“REACH” European commission (EC)

“FDA” USA standard requirements, test by SGS.

“Heavy metal free”, test by SGS/TUV

“Toxic free”, test by SGS/TUV

Biodegradation – ISO14855/ASTM D6400

Available in:

BLUE 150cm wide (50m rolls)

Industrial | EVA

EF750 Eva Food Grade

EF750 is a EFM (Evironmentally Friendly Material) made from EVA.

• 30% lighter than PVC• Higher Flexibility and Anti-Cracking• Superior High Frequency weldability• FDA Certified (FDA21 CFR 177.1350)

Suitable for:

• Drinking water liners/bladders• Grain covers• Food containment• Covers in the Food industry

Reversible Blue/White colour


WIDTH 210cm

WEIGHT 670gsm

BASE CLOTH 833 Decitex H/T Polyester

SURFACE FINISH EVA Reversible Food Grade (FDA 21 CFR 177.1350)





ROLL LENGTH 30m

FABRICATION METHODS Hot Wedge: Hot Air or High Frequency Welding: Sewing


Industrial | Closed Cell Foam

P-FoamP-Foam is a cross-linked, expanded foam based on polyethylene polymer resin.

It is available in 30 kg/m3 Density

P-Foam performs particularly well where thermal insulation is critical, such as underlay and headliners, or cost-effectiveness is important, such as packaging.

Key features:

• Consistent quality• Thermoforming ability• Meets REACH regulations• Workability• Used in many high-end brands

Sheet size is 2000mm x 1000mm

Available in:

Blue and Black 3mm, 6mm, 9mm, 12mm, 20mm, 25mm, 30mm, 40mm, 50mm

Industrial | Leather

Indian Leather Strapping

INDIAN LEATHER STRAPPING is a natural leather hide of dyed chrome leather used for making strapping.

Hides will vary usually from approx12sqft to 21sqft

3.5 - 4.5mm Thickness variation

Industrial | Equestrian

Page 167

Horse Cover Lining RW500

Horse Cover Lining White RW 500

HORSE COVER LINING RW500 is a needled punched recycled wool lining for horsecovers.

500gsm x 1600mm wide (30m rolls)

HORSE COVER LINING White RW500 is a needled punched recycled wool lining for horsecovers.

500gsm x 1600mm wide (30m rolls)

Industrial | Equestrian

Girth Sponge

Cavallino Tearlok Breeze

GIRTH SPONGE is a neoprene fabric with a knitted polyester tricot backing, and soft PVC embossed surface, traditionally used as a outer padding for a girth strap on horses

GIRTH SPONGE has also found it’s way into many other applications.

Available in: Black and Brown.4.0mm thick x 137cm Wide

Cavallino Tearlok Breeze is a summer weight horse cover canvas.


WIDTH 205cm

WEIGHT 273gsm







Industrial - wwiggins.co.nz · breaking force warp/weft 1290n / 1000n (as 2001.2.3) tear strength...

Documents

Transcript of Industrial - wwiggins.co.nz · breaking force warp/weft 1290n / 1000n (as 2001.2.3) tear strength...