India Mark Handpump

Available Models & Operating Data:

Pump Model Head Minimum ID of bore (millimeter)

Riser pipe Size in inches

Stroke Length

Recommended for water level setting depth (meters)

Discharge

India Mark II 12 to 45

m 100 1¼ 125 +/- 4

mm 20-45 0.43 liter / stroke

India Mark III 12 to 33

m 100 2 / 2½ 125 +/- 4

mm 20-45 0.43 liter / stroke

India Mark II Extra Deep well

50 to 85 m 100 1¼

125 +/- 4 mm 45-90 0.43 liter / stroke

Afridev 45 m 100 2½ 225 mm 45 0.44 liter / stroke

Materials of Construction:

HANDPUMP Part Name Material Coating

Head Assembly M.S. G.I.(Hot Dip) or Zink (Electro Plated)*

Handle Assembly M.S. G.I.(Hot Dip) or Zink (Electro Plated)*

Third Plate M.S. G.I.(Hot Dip) or Zink (Electro Plated)*

Water Tank Assembly M.S.

G.I.(Hot Dip) or Zink (Electro Plated)*

Stand Assembly M.S. G.I.(Hot Dip) or) Zink (Electro Plated)*

Chain Assembly M.S. Pitch chain welded with M12 internal threaded coupler

Excel M.S. or S.S.*

India Mark Handpump Parts

CONNECTING ROD:Part Name Material Coating Length

Two Side Nut & Coupling Welded Connecting Rod

M.S.Zink (Electro Plated) 3”meter

India Mark-II or India Mark -III CYLINDER ASSEMBLY:

Part Name Material Coating

Cylinder body C.I. Hot Paint

Liner Brass

Plunger rod M.S. or S.S.*

Reducer cap C.I.Sealing ring RubberPlunger yoke G.M.

Check valve G.M.Check valve guide G.M.Check valve seat Rubber

Cup washers (Pump Bucket) Rubber or Leather

Tool Kits

INDIA MARK -II STANDARD TOOL KIT:

NO. ITEM NAME QTY

1 1 each button die set for 12mm threads. 1NOS.

2 1 each die set for threads of 32 mm NB GI riser pipe 1NOS.

3 1 each pipe wrench, 450 mm drop forged carbon steel. 1NOS.

4 1 each pipe wrench, 600 mm drop forged carbon steel 1NOS. 5 4 each double ended CV open jaw spanner M 17 x M19 4NOS.

6 1 each adjustable spanner 250 mm drop forged with heat treated induction hardened polished jaws. 1NOS.

7 1 each screw driver 300 mm engineering type. 1NOS.

8 1 each screw driver to adjust die as per [1] & [2] 1NOS.

9 1 each hacksaw with 300 mm blade and 6 spare blades 1NOS.

10 1 each flat file 250 mm with a wooden handle. 1NOS. 11 1 each half round file, 250 mm with wooden handle 1NOS.

12 1 each ball pain hammer [head 800 gram. Drop gorged with a varnished wooden handle] 1NOS.

13 1 each pressure type oil can [1/2 pint] / plastic oil can with nozzle outlet 1NOS.

14 1 each wire brush with wooden handle 1NOS.

15 1 each center punch carbon steel, ground tip for locking valves. 1NOS.

16 1 each 75 meters. Nylon rope 3 mm thick 1NOS.

17 1 each 1kg. Multi purpose grease. 1NOS.

INDIA MARK-II SPECIAL TOOL KIT:

NO. ITEM NAME QTY 1 1 each self locking clamp or heavy duty clamp for 32 mm NB GI pipe 1NOS.

2 1 each connecting rod vice 1NOS.

3 3 each pipe lifting spanner 3NOS.

4 1 each water tank lifter 1NOS.

5 2 each crank spanner [M17 x M 19] 2NOS.

6 1 each connecting rod lifter 1NOS.

7 1 each handle axle punch 1NOS. 8 1 each rod coupling spanner 1NOS.

9 1 each chain coupler supporting tool 1NOS.

10 1 each bearing pressing / mounting tool 1NOS.

Question’s & Solutions’:

What’s difference between India mark-ii & India mark-iii hand pump?

Many buyers have a hard time deciding between the Mark 2 and Mark 3 pumps. While the Mark 2

Pumps has been around for ages and is used in almost every corner of the world, the VLOM advantage in Mark 3

means that every time the cylinder components need replacement or maintenance, only the valve assemblies

can be pulled out without taking out the riser mains. In many villages where the resources are scarce, this can

often mean the difference between the pump working a nd or being broken down for a long time. At the same

time, the cost of riser pipes is nearly double in Mark -III. So is this cost justified? We feel that in the end this

choice must be made by factors such as availability of funds for the purchase and the c omfort level of the

community who will ultimately be responsible for maintaining and operating the pump.

What’s difference between Flange Leg or 3 Angle Legs?

We are providing you Two Type of Hand pump’s legs. 3 – Angle legs are Regular usages for hand

pump, but if customer’s requirement we provide them any hand pump’s leg in to Square or Round Flange. So

1’st benefit is Square Flange’s hand pump is take very less space in container. & 2’nd is it’s very easy to fix on

foundation.

About Folding Hand Pump?

We are also providing you Folding Hand Pump. In This Pump We are Attach Hand pump’s leg With

2Nut Bolt & Water tank’s pipe is attach by 1.1/4” coupling so water tank & Stand Assembly take very less space

in container & Our Buyer’s take benefit in to sh ipment & container’s space.

Packing Detail: (General Consignment)

Handpump packing: - 1nos. Handpump Stand assembly & Head are coated with thick plastic after pack into cotton bag.

- 4nos. handle pack in to cotton bag.

- If Customer’s requirement we are also providing wooden box & other facility. (charges are extra payable by

customer)

Rod packing: - 20pcs. Are pack in to plastic or cotton bag.

Cylinder packing: - 6pcs. Cylinder pack in 1box after its pack in to cotton or plastic bag.

Pipe packing:

- 5pcs. G.I.Pipe packs in to 1bunch.

- 10pcs. P.V.C.Pipe Pack in to Plastic pack.

CONTACT PERSON: HIREN PATEL

Tel : + 91 281 2387008 : + 91 90334 64658 : + 91 99743 31117

Email : hirenpatel_mpi@hotmail.com