Index to BRE Digests, Guides, Information Papers and ... · PDF fileIndex to BRE Digests,...
Transcript of Index to BRE Digests, Guides, Information Papers and ... · PDF fileIndex to BRE Digests,...
Index to BRE Digests, Guides, Information Papers and Expert Packs
January 2009
DIGESTS Digests are authoritative summaries of the state of the art on specific topics in construction design and technology. They draw on BRE’s expertise in these areas and provide essential support for all involved in design, specification, construction and maintenance. Digests are presented in an easy-to-read format supported by photographs and detailed diagrams. A small number of Special Digests cover particular topics in more depth.
INFORMATION PAPERS Information Papers summarise recent BRE research findings, and give advice on how to apply this information in practice.
GOOD BUILDING GUIDES Good Building Guides give construction professionals concise guidance on the principles and practicalities for achieving good-quality building. These highly illustrated practical guides draw on BRE experience and research, and other sources, to provide clear technical advice and solutions.
GOOD REPAIR GUIDES Good Repair Guides deal with the defects most commonly encountered in buildings and offer sound advice on putting them right. They are highly illustrated to make the problems and solutions easy to identify and understand.
This leaflet provides a classified subject index to BRE Digests, Good Building Guides, Good Repair Guides and Information Papers. It also includes numerical listings of titles in each series. The publications are available on subscription through BRE Connect and BRE Connect Online and individual copies can be ordered from IHS BRE Press, Willoughby Road, Bracknell, RG12 8FB, 01344 328038, [email protected], or online at www.ihsbrepress.com. Subscribers to BRE Connect Online receive all new leaflets published month each in pdf format, and have access to the complete catalogue of BRE reports and guides, and many other discounts and benefits.
2 INDEX – JANUARY 2009
SUBJECT INDEX
Building elements and structures Doors, windows, glazing and cladding 2 Floors, flooring and stairs 2 Masonry, walls and chimneys 3 Roofs and roofing 3 Soils, ground investigation and foundations 4
Design and management Building design 4 Procurement, maintenance, site organisation and waste management 4
Environment and services Air quality, radon and ventilation 4Condensation and dampness 5Electrical, lighting, acoustics and control systems 5Energy, insulation and air conditioning 5Sustainability and green issues 5Water supply, drainage and sanitation 6Wind, floods and climate 6
Fire and security 6 Materials Bricks, mortar, render, plaster and stone 6Composites, metals, paints, adhesives and sealants 7Concrete 7Timber 7
LISTINGS Good Repair Guides 8
Good Building Guides 8
Pollution control guides 9
In-situ ground testing 9
Digests 9
Special Digests 11
Withdrawn Digests 12
Information Papers 13
ORDER FORM 16
SUBJECT INDEXThis index lists all BRE Digests, Good Building Guides, Good Repair Guides in print and Information Papers published from 1994, grouped under 19 subject headings.
BUILDING ELEMENTS AND STRUCTURES
Doors, windows, glazing and cladding Double glazing for heat and sound
insulation DG379 1993Factory glazed windows
Part 1. Introduction and the glazing process DG497/1 2005 Part 2. Transport, storage and installation DG497/2 2005
Hot air repair of PVC-U profiles IP12/01 2001
Hot air repair of PVC-U window and door frames GR31 2001
Impact standards for glass IP1/05 2005Installing domestic automatic door controls
GG48 2001Installing domestic automatic window controls GG49 2201Insulated external cladding systems GG31 1999Insulating glazing units DG453 2000Level external thresholds: reducing moisture penetration and thermal
bridging GG47 2001Metal cladding: assessing the thermal performance of built-up systems
which use ‘Z’ spacers IP10/02 2002Whole life performance of domestic automatic window controls IP3/02 2002Plastics external glazing DG430 1998PVC-U windows DG404 1995Reinforced plastics cladding panels DG161 1974Repairing or replacing lintels GG1 1992Repairing timber windows
Part 1. Investigating defects and dealing with water leakage GR10/1 1997 Part 2. Dealing with draughty windows, condensation in sealed units, operating problems, and deterioration of frames GR10/2 1997
Selecting windows by performance DG377 1992Wall cladding defects and their diagnosis DG217Wall cladding: designing to minimise defects due to inaccuracies and
movements DG223 1979Weathering of white external PVC-U DG440 1999
Floors, flooring and stairs Domestic floors: repairing or replacing
floors and flooring Part 1. Construction, insulation and damp-proofing GG28/1 1997 Part 2. Concrete floors, screeds and finishes GG28/2 1997 Part 3. Timber floors and decks GG28/3 1997 Part 4. Magnesite, tiles, slabs and screeds GG28/4 1997 Part 5 Wood blocks and suspended timber GG28/5 1997
Flooring, paving and setts – requirements for safety in use IP10/00 2000
Heat losses through ground floors DG145 1972
Increasing the fire resistance of existing timber floors DG208 1988Industrial platform floors: mezzanine and raised storage DG437 1999Insulating ground floors GG45 2001Joist hangers GG21 1996Proprietary nosings for non-domestic stairs IP15/03 2003Repairing and replacing ground floors GR17 1998Safer floors: guidance on specifying flooring for internal and external
safety in domestic buildings IP10/07 2007*
PRICES [BRE Connect prices shown in square brackets]
Prices of multi-part leaflets are available at www.ihsbrepress.com. Prices of Special Digests are given on page 11.
Price code a b c d e
Digests, Good Building Guides, Good Repair Guides
£9
[£7.50]
£15
[£12]
£15
[£12]
£20
[£15]
£22.50
[£15]
Information Papers
£9
£7.50]
£9
[£7.50]
£12.50
[£10]
£15
[£12]
UPDATINGIHS BRE Press produces regular catalogues of new and best-selling titles, and email newsletters about new titles and developments. Our complete catalogue of over 1500 titles can be downloaded from www.ihsbrepress.com.
EXPERT PACKSThe leaflets under each subject heading are available in Expert Packs, apart from those marked *, which are recent titles, Special Digests or Information Papers published before 2000. The competitively priced packs are supplied in heavy-duty ring binders and further information is given on page 10. [BRE Connect subscriber prices for the Expert Packs are shown in square brackets.]
Doors, windows, glazing and cladding pack
AP256 £70 [£50]
Floors, flooring and stairs pack
AP260 £45 [£32.50]
3 INDEX – JANUARY 2009
Masonry, walls and chimneys AAC ‘aircrete’ blocks and masonry
Part 1. DG468/1 2002 Part 2. DG468/2 2002
Aircrete tongue and grooved block masonry IP7/05 2005
Aircrete: thin joint mortar systems DG432 1998
Building brickwork or blockwork retaining walls GG27 1996
Building damp-free cavity walls GG33 1999Building reinforced, diaphragm and wide
plan freestanding walls GG19 1994Building simple plan brick or blockwork
freestanding walls GG14 1994Cleaning exterior masonry
Part 1. Developing and implementing a strategy DG449/1 2000 Part 2. Methods and materials DG449/2 2000
Cleaning external walls of buildings Part 1. Cleaning methods GR27/1 2000 Part 2. Removing dirt and stains GR27/2 2000
Corrosion of metal components in walls DG461 2001Domestic chimneys for solid fuel – flue design and installation GG46 2001Dynamic stiffness of wall ties used in masonry cavity walls: measurement
procedure IP3/01 2001Earth, clay and chalk walls: inspection and repair methods GR35 2006Freestanding brick walls – repairs to copings and cappings GG17 1993Installing wall ties GG41 2000Installing wall ties in existing construction DG329 2000Insulating masonry cavity walls
Part 1. Techniques and materials GG44/1 2001 Part 2. Principal risks and guidance GG44/2 2001
Insulating solid masonry walls GG50 2002Masonry and concrete structures: measuring in-situ stress and elasticity
using flat jacks DG409 1995Measuring the compressive strength of masonry materials: the screw pull-
out test DG421 1997Principles of masonry conservation management DG502 2007Providing temporary support during work on openings in external walls
GG15 1992Removing internal loadbearing walls in older dwellings GG20 1999Repairing brick and block freestanding walls GR28 2000Repairing brick and block masonry DG359 1991Repairing chimneys and parapets GR15 1998Repairing damage to brick and block walls GR3 1996Replacing masonry wall ties GR4 1996Replacing wall ties DG401 1995Repointing external brickwork walls GR24 1999Retro-installation of bed joint reinforcement in masonry GG62 2004Supporting temporary openings GR25 1999Surveying brick or blockwork freestanding walls GG13 1992Surveying masonry chimneys for repair or rebuilding GG2 1990Temporary support for openings in external walls: assessing load GG10 1991Testing bond strength of masonry DG360 1991Thin layer mortar masonry GG58 2003Ties for masonry walls: a decade of development IP11/00 2000Untied cavity party walls: structural performance when using AAC
blockwork IP1/99 1999
Roofs and roofing Bracing trussed rafter roofs GG8 1991Building a new felted flat roof GG36 1999Designing roofs for climate change:
modifications to good practice guidance DG499 2006
Designing roofs with safety in mind IP7/04 2004
Erecting, fixing and strapping trussed rafter roofs GG16 1993
Flat roof design Part 1. Bituminous roofing membranes DG419 1996 Part 2. The technical options DG312 1986 Part 3. Thermal insulation DG324 1987
Flat roofs: assessing and making roof repairs Part 1. Assessing bitumen felt and mastic asphalt roofs for repair GR16/1 1998 Part 2. Making repairs to bitumen felt and mastic asphalt roofs GR16/2 1988
Insulated profiled metal roofs GG43 2000
Insulating roofs at rafter level: sarking insulation GG37 2000Loft conversion
Part 1. Structural considerations GG69/1 2006 Part 2. Safety, insulation and services GG69/2 2006
Re-covering old timber roofs DG351 1990Re-covering pitched roofs GR14 1998Roof loads due to local drifting of snow DG439 1999Safety considerations in designing roofs DG493 2005Site-cut pitched timber roofs
Part 1. Design GG52/1 2002 Part 2. Construction GG52/2 2002
Slate and tile roofs: avoiding damage from aircraft wake vortices DG467 2002Stability under wind load of loose-laid external roof insulation boards
DG295 1985Structural appraisal of buildings with long-span roofs DG282 1984Swimming pool roofs: minimising the risk of condensation using warm-
deck roofing DG336 1988Tiling and slating pitched roofs
Part 1. Design criteria, underlays and battens GG64/1 2005 Part 2. Plain and profiled clay and concrete tiles GG64/2 2005 Part 3. Natural and manmade slates GG64/3 2005
Ventilated and unventilated cold pitched roofs GG51 2002Ventilating thatched roofs GG32 1999
Soils, ground investigation and foundations A simple guide to in-situ ground testing
Part 1. What is it and why do it? IS1 2003 Part 2. Cone penetration testing IS2 2003 Part 3. Flat dilatometer testing IS3 2003 Part 4. Dynamic probing IS4 2003 Part 5. Pressuremeter testing IS5 2003 Part 6. Large-diameter plate loading tests IS6 2003 Part 7. Geophysical testing IS7 2003
Assessment of damage in low-rise buildings DG251 1995
Basement construction and waterproofing: Part 1. Site investigation and preparation GG72/1 2007* Part 2 Construction, safety, insulation and services GG72/2 2007*
Building on brownfield sites Part 1. Identifying the hazards GG59/1 2003 Part 2. Building on brownfield sites: reducing the risks GG59/2 2004
Contaminated land: ingress of organic vapours into buildings DG482 2004Cracks caused by foundation movement GR1 1996Damage to buildings caused by trees GR2 1996Desiccation in clay soils DG412 1996Development of sites containing expansive ferrous slags IP8/05 2005Foundations for low-rise building extensions GG53 2002Low-rise building foundations on soft ground DG471 2002Low-rise building foundations: the influence of trees in clay soils DG298 1999Low-rise buildings on fill
Part 1. Classification and load-carrying characteristics DG427/1 1997 Part 2. Site investigation, ground movement and foundation design DG427/2 1998 Part 3. Engineered fill DG427/3 1998
Low-rise buildings on shrinkable clay soils Part 1. DG240 1993 Part 2. DG241 1993
Monitoring building and ground movement by precise levelling DG386 1993Optimising ground investigation DG472 2002Pfa grouts for stabilising mine workings IP10/06 2006Principal drivers for reusing foundations IP5/07 2007Pruning trees to reduce water use: summaries of research; conclusions and
recommendations IP7/06 2006 Simple measuring and monitoring of movement in low-rise buildings
Part 1. Cracks DG343 1989 Part 2. Settlement, heave and out-of-plumb DG344 1989
Simple foundations for low-rise housing Part 1. Site investigation GG39/1 2000 Part 2. ‘Rule of thumb’ design GG39/2 2001 Part 3. Groundworks: getting it right GG39/3 2002
Site investigation for low-rise building Part 1. Desk studies DG318 1987 Part 2. Procurement DG322 1987 Part 3. Soil description DG383 1993 Part 4. The walk-over survey DG348 1989 Part 5. Trial pits DG381 1993 Part 6. Direct investigations DG411 1995
Masonry, walls and chimneys pack
AP261 £130 [£90]
Roofs and roofing pack AP263 £85 [£60]
Soils, ground investigation and foundations pack
AP264 £130 [£90]
4 INDEX – JANUARY 2009
Slurry trench cut-off walls to contain contamination DG395 1994Soakaway design DG365 1991Tilt of low-rise buildings with particular reference to progressive
foundation movement DG475 2003Timber piles and foundations DG479 2003Underpinning DG352 1993
DESIGN AND MANAGEMENT
Building design Acces to buildings DG505 2008*An introduction to building with Structural
Insulated Panels (SIPs) IP13/04 2004Applying the code for sustainable homes
on the BRE Innovation Park (4-part set) IP9/08 2008*
Part 1. Lessons learnt about building fabric Part 2. Lessons learnt about energy sources, overheating and ventilation Part 3. Lessons learnt about water use, harvesting, recycling and drainage Part 4. Lessons learnt about architecture, construction and material sourcing
Bird, bee and plant damage to buildings DG418 1996Building performance feedback: getting started DG478 2003Building without cold spots GG35 1999Common defects in low-rise traditional housing DG268 1982Connecting walls and floors
Part 1. A practical guide GG29/1 1997 Part 2. Design and performance GG29/2 1997
Control of lichens, moulds and similar growths DG370 1992Damage to structures from ground-borne vibration DG403 1995Habitability guidelines for existing housing GG9 1991Helping visually impaired people in their homes: assistive technology
IP8/03 2003Loads generated by jumping crowds: experimental assessment IP4/02 2002Masonry walls and beam-and-block floors U-values and building
regulations. SD4:2007*Modern methods of construction (MMC) in housing
Part 1. Drivers and barriers to their use IP3/07/1 2007 Part 2. Planning for manufactured housing IP3/07/2 2007 Part 3. Designing for manufacture IP3/07/3 2007 Part 4. Successful development and manufacture of MMC products IP3/07/4 2007
Naturally innovative: using biomimetics in construction IP11/07 2007*New build and refurbishment in the sustainable communities plan IP2/08
2008*Outline guide to assessment of traditional housing for rehabilitation GG6 1990Permanent cantilever grandstands: dynamic response IP5/00 2000Prefabricated housing in the UK
Part 1. A case study – Murray Grove, Hackney IP16/01/1 2001 Part 2. A case study – CASPAR II, Leeds IP16/01/2 2001 Part 3. A summary paper IP16/01/3
Prefabricated relocatable extensions: evaluating their use for people with disabilities IP7/07 2007
Refurbishing Victorian housing IP9/06 2006Retractable grandstands: dynamic response IP4/00 2000Reducing the risk of pest infestations in buildings DG415 1996Relocatable buildings: structural design, construction and maintenance
DG374 2002Static load testing: concrete floor and roof structures within buildings
DG402 1995Structural appraisal of existing buildings for change of use DG366 1991Structural design in architecture DG12 1960Supplementary guidance for assessment of timber-framed houses
Part 1. Examination GG11 1993 Part 2. Interpretation GG12 1993
Temporary demountable grandstands: dynamic response IP3/00 2000The response of structures to dynamic crowd loads DG426 2004Timber frame dwellings. Conservation of fuel and power: AD L1A
guidelines. SD2:2006* U-values for light steel-frame construction DG465 2002Why do buildings crack? DG361 1991
Procurement, maintenance, site organisation and waste management Achieving cost effective responsive
maintenance IP14/05 2005A guide to certification and approval for
engineers and designers IP5/08 2008*Balanced Value for sustainable
procurement IP6/06 2006Better building – integrating the supply
chain: a guide for clients and their consultants DG450 2000
Cleaning buildings: legislation and good practice DG448 2000
Composting in the construction industry IP3/05 2005
Construction and demolition waste Part 1. GG57/1 2003 Part 2. GG57/2 2003
Construction logistics: an introduction DG459 2001Construction site communication
Part 1. General GG54/1 2003 Part 2. Masonry GG54/2 2003
Construction site packaging wastes: a market position report IP8/02 2002Handover of Office Building Operations protocol (HOBO) DG474 2002Lists of excluded materials: a change in practice DG425 1997Non-ferrous metal wastes as aggregates in highway construction IP8/06 2006Offsite construction: an introduction GG56 2003Reclamation and recycling of building materials: industry position report
IP7/00 2000Recycling fibre reinforced polymers in the construction industry IP4/04 2004The Quality Mark Scheme GG55 2003Using small volume wastes in construction IP9/05 2005Waste minimisation on a construction site DG447 2000Whole building commissioning
Part 1. A guide for clients IP8/04/1 2004 Part 2. A guide for designers IP8/04/2 2004 Part 3. A guide for specifiers IP8/04/3 2004 Part 4. A guide for facilities managers IP8/04/4 2004
Working with local businesses and residents GG71 2007
ENVIRONMENT AND SERVICES
Air quality, radon and ventilation Achieving airtightness
Part 1. General principles GG67/1 Part 2. Practical guidance on techniques – floors, walls and roofs GG67/2 Part 3. Practical guidance on techniques – windows and doors, sealing methods and materials GG67/3
Airtightness in UK dwellings IP1/00Airtightness of ceilings: energy loss and
condensation risk IP4/06Background ventilators for dwellings IP2/03Buildings and radon GG25Carbon monoxide detectors GG30CFCs in buildings DG358 Continuous mechanical ventilation in dwellings: design, installation and
operation DG398Humidistat controlled extract fans: performance in dwellings IP5/99Improving air quality in homes with supply air windows IP6/03Improving ventilation in housing GR21 Maintaining good air quality in your home IP9/04Natural ventilation in non-domestic buildings DG399Pollution control guides: Controlling emissions of particles, vapour and
noise on construction sites Part 1. Pre-project planning and effective management PG1 Part 2. Site preparation, demolition, earthworks and landscaping PG2 Part 3. Haulage routes, vehicles and plant PG3 Part 4. Materials handling, storage, stockpiles, spillage and disposal PG4 Part 5 Fabrication processes and internal and external finishes PG5
Positive input ventilation IP12/00Radon protection for new domestic extension and conservatories GG73
2008*Radon protection for new dwellings GG74 2008*Ventilation and indoor air quality in schools IP6/05Ventilators: ventilation and acoustic effectiveness IP4/99VOC emissions from building products
Part 1. Sources, testing and emission data DG464/1 Part 2. Control, evaluation and labelling schemes DG464/2
VOC emissions from flooring adhesives: European test methods and labelling IP12/03
Building design pack AP252 £95 [£67.50]
Procurement, maintenance, site organisation and waste
management pack AP262 £70 [£50]
Air quality, radon and ventilation pack AP250 £85 [£60]
5 INDEX – JANUARY 2009
Condensation and dampness Assessing moisture in building materials
Part 1. Sources of moisture GR33/1 2002 Part 2. Measuring moisture content GR33/2 2002 Part 3. Interpreting moisture data GR33/3 2002
Condensation in roofs DG180 1975Damp-proof courses DG380 1993Diagnosing the causes of dampness GR5
1997Drying out buildings DG163 1974Estimation of thermal and moisture
movements and stresses DG227 1979Estimation of thermal and moisture
movements and stresses DG228 1979Interstitial condensation and fabric degradation DG369 1992Modelling and controlling interstitial condensation in buildings IP2/05 2005Modelling condensation and airflows in pitched roofs IP5/06 2006Remedying condensation in domestic pitched tiled roofs GR30 2001Rising damp in walls: diagnosis and treatment DG245 2007Surface condensation and mould growth in traditionally-built dwellings
DG297 1985Temperature and humidity in batten voids IP20/01 2001Treating condensation in houses GR7 1997Treating dampness in basements GR23 1999Treating rain penetration in houses GR8 1997Treating rising damp in houses GR6 1997
Electrical, lighting, acoustics and control systems Control of solar shading IP12/02 2002Dealing with poor sound insulation
between new dwellings IP14/02 2002Developments in innovative lighting IP9/00
2000Dwellings and energy efficient lighting:
new regulation Part L IP5/02 2002Electrical interference in buildings DG335
1988Electronic tagging and wireless
technologies Part 1. Application in the construction industry IP16/02/1 2002 Part 2. An overview IP16/02/2 2002
Estimating daylight in buildings DG309 1986Hospitals in the best light: an introduction to hospital lighting IP14/00 2000Impact of horizontal shading devices on peak solar gains through windows
IP17/03 2003Improving sound insulation
Part 1. GR22/1 1999 Part 2. GR22/2 1999
Improving the sound insulation of separating walls and floors DG293 1985Installing BMS to meet electromagnetic compatibility requirements DG424 1997Insulation against external noise DG338 1988Internet Protocol: an introductory guide IP1/07 2007Minimising noise from domestic fan systems: fan-assisted radon mitigation
systems GG26 1996Lighting
Part 1. General principles GG61/1 2004 Part 2. Domestic and exterior GG61/2 2004 Part 3. Non-domestic GG61/3 2004
Photoelectric control of lighting: design, setup and installation issues IP2/99 1999
Photovoltaics: integration into buildings DG438 1999Prefabricated power cabling for buildings: procuring, installing and testing
DG456 2001Protecting buildings against lightning DG428 1998Rain noise from glazed and lightweight roofing IP2/06 2006Reducing impact and structure-borne sound in buildings IP4/01 2001Retrofitting solar shading IP11/02 2002Selecting lighting controls DG498 2006Sound insulation: basic principles DG337 1994Standardised and prefabricated wiring for buildings
Part 1. Use in building services IP15/01/1 2001 Part 2. Case studies IP15/01/2 2001
Traffic noise and overheating in offices DG162 1974Whole life performance of domestic automatic door controls IP2/02 2002An intoduction to intelligent buildings IP13/08 2008*
Energy, insulation and air conditioning Air as a refrigerant in air conditioning
systems in buildings IP21/00 2000Ammonia refrigerant in buildings:
minimising the hazards IP18/00 2000An introduction to PassivHaus IP 12/08
2008*Assessing the effects of thermal bridging at
junctions and around openings IP1/06 2006
Condensing boilers DG339 1988Determining the minimum thermal resistnace
of cavity closers IP8/08 2008*Domestic energy use and carbon emissions:
scenarios to 2050 IP16/05 2005Dynamic insulation for energy saving and comfort IP3/03 2003Energy efficiency in dwellings DG355 1990Free cooling with displacement ventilation IP6/02 2002Improving energy efficiency
Part 1. Thermal insulation GR26/1 1999 Part 2. Boilers and heating systems, draughtstripping GR26/2 1999
Installing thermal insulation: good site practice Part 1. GG68/1 2006 Part 2. GG68/2 2006
Mechanical installation of roof-mounted photovoltaic systems DG495 2005Modelling the performance of thermal mass IP6/01 2001Perimeter chilled beams IP11/04 2004Reliability and performance of solar-collector systems DG254 1981SBEM for non-domestic buildings IP2/07 2007Small scale, building integrated, wind power systems IP12/05 2005Solar energy in urban areas IP5/01 2001The Carbon Performance Rating for offices DG457 2001Thermal mass in office buildings
Part 1. An introduction DG454/1 2001 Part 2. Design criteria DG454/2 2001
The scope for reducing carbon emissions from housing IP15/05 2005
Sustainability and green issues Assessing environmental impacts of
construction: industry consensus, BREEAM and UK Ecopoints DG446 2000
Costing sustainability: how much does it cost to achieve BREEAM and Ecohomes ratings IP4/05 2005
Delivering sustainability objectives through planning IP3/08 2008*
Environmental benchmarking for property portfolio managers IP1/01 2001
Environmental sustainability in bridge management IP14/04 2004
Environmental weightings: their use in the environmental assessment of construction products IP4/07 2007
Green buildings revisited Part 1. Small projects IP13/00/1 2000 Part 2. Large projects IP13/00/2 2000
Life cycle impacts of timber: a review of the environmental impacts of wood products in construction DG470 2002
Local authorities’ performance on sustainable construction IP7/01 2001Managing sustainable construction AP146 2002Reducing the effects of climate change by roof design DG486 2004Refurbishment or redevelopment of office buildings?
Part 1. Sustainability comparisons IP9/02/1 2002 Part 2. Sustainability case histories IP9/02/2 2002
Sustainable buildings Part 1. Benefits for occupiers IP13/03/1 2003 Part 2. Benefits for designers IP13/03/2 2003 Part 3. Benefits for investors and developers IP13/03/3 2003 Part 4. Benefits for constructors IP13/03/4 2003
Sustainability indicators for utilities IP21/01 2001Sustainability lessons from private finance and similar private initiatives
IP13/02 2002The price of sustainable schools IP1/08 2008*Whole life costing and life-cycle assessment for sustainable building design
DG452 2000Whole Life Value: sustainable design in the built environment IP10/04 2004
Condensation and dampness pack AP255 £50 [£35]
Electrical, lighting, acoustics and control systems pack
AP257 £95 [£67.50]
Energy, insulation and air conditioning pack AP258 £70 [£50]
Sustainability and green issues pack
AP247 £50 [£35]
6 INDEX – JANUARY 2009
Water supply, drainage and sanitation Access to domestic underground drainage
systems DG292 1984Dealing with noisy plumbing GR32 2002Disposing of rainwater GG38 2000Drainage design for buildings with reduced
water use IP1/04 2004Preventing hot water scaldings in
bathrooms: using TMVs IP14/03 2003Protecting pipes from freezing GG40 2000Reed beds
Part 1. Application and specification GG42/1 2000 Part 2. Design, construction and maintenance GG42/2 2000
Repairing and replacing rainwater goods GR9 1997Sanitary pipework
Part 1. Design basis DG248 1981 Part 2. Design of pipework DG249 1981
Self-sealing waste valves for domestic use: an assessment IP8/07 2007Unvented domestic hot water systems DG308 1986Water conservation: low flow showers and flow restrictors IP2/00 2000Weathering of plastics pipes and fittings IP8/01 2001
Wind, floods and climate Building in winter GG34 1999Building overseas in warm climates
DG302 1985Climate and site development
Part 1. General climate of the UK DG350/1 1990 Part 2. Influence of microclimate DG350/2 1990 Part 3. Improving microclimate through design DG350/3 1990
Climate change GG63 2004Micro-wind turbines on house roofs
IP4/08 2008*New materials in hot climates DG382 1993Repairing flood damage
Part 1. Immediate action GR11/1 1997 Part 2. Ground floors and basements GR11/2 1997 Part 3. Foundations and walls GR11/3 1997 Part 4. Services, secondary elements, finishes, fittings GR11/4 1997
Repairing frost damage Part 1. Roofing GR20/1 1998 Part 2. Walls GR20/2 1998
The assessment of wind loads Part 1. Background and method DG346/1 1989 Part 2. Classification of structures DG346/2 1989 Part 3. Wind climate in the United Kingdom DG346/3 1989 Part 4. Terrain and building factors and gust peak factors DG346/4 1989 Part 5. Assessment of wind speed over topography DG346/5 1989 Part 6. Loading coefficients for typical buildings DG346/6 1989 Part 7. Wind speeds for serviceability and fatigue assessments DG346/7 1989 Part 8. Internal pressures DG346/8 1990
Wind actions on buildings and structures DG406 1995Wind loading on buildings
Part 1. Brief guidance for using BS 6399-2: 1997 DG 436/1 1999 Part 2. BS 6399-2: 1997 worked examples – effective wind speeds for a site, and loads on a two-storey house DG436/2 1999 Part 3. BS 6399-2: 1997 worked examples – loads on a portal frame building and on an office tower on a podium DG436/3 1999
Wind around tall buildings DG390 1994Wind loads on canopy roofs DG284 1984Wind loads on roof-based photovoltaic systems DG489 2004Wind loads on temporary stage decks DG483 2004Wind loads on unclad structures. SD5 2004*Wind scour of gravel ballast on roofs DG311 1986
FIRE AND SECURITY
FireBR135: Annex B: Performance criteria
and classification method of BS 8414-4:2005 DG501 2007
Dust explosions DG288 1984Fire doors DG320 1988Fire modelling DG367 2004Fire risks from combustible cavity
insulation DG294 1985Precast Hollowcore slabs in fire IP5/03
2003Risk of dust fires and explosions IP14/08
2008Safe and secure town centres at night
IP10/08 2008*Safe as houses? DG458 2001Security Fog generators DG506 2008*Steel structures supporting composite floor slabs: design for fire DG462 2001Self heating and spontaneous combustion IP11/08 2008*Structural fire engineering design – Introduction DG484 2004Structural fire engineering design
Part 1. Aspects of life safety DG490 2004 Part 2. Fire and thermal response DG488 2004 Part 3. Fire development DG485 2004
Structural fire engineering design – Materials behaviour Part 1. Concrete DG487/1 2004 Part 2. Steel DG487/2 2004 Part 3. Masonry DG487/3 2004 Part 4. Timber DG487/4 2004
Wireless fire detection and European regulations IP6/08 2008
MATERIALS
Bricks, mortar, render, plaster and stone Assessing external rendering for
replacement or repair GG23 1995Bricks, blocks and masonry made from
aggregate concrete Part 1. Performance requirements DG460/1 2001 Part 2. Appearance and environmental aspects DG460/2 2001
Building masonry with lime-based mortars GG66 2005
Building mortar DG362 1991Choosing external rendering GG18 1994Clay bricks and clay brick masonry
Part 1. DG441/1 1999 Part 2. DG441/2 1999 Part 3. DG441/3 1999
Cleaning exterior masonry Part 1. Pretreatment assessment of a stone building IP9/99 1999 Part 2. Assessing cleaning of a brick-built church IP10/99 1999
Conservation and cleaning of masonry art 1.Stonework DG508 2008*Lightweight veneer stone cladding panels IP10/01 2001Perforated clay bricks DG273 1983Plasterboard
Part 1. Types and their applications GG70/1 2007 Part 2. Fixing and finishing non-separating walls and floors GG70/2 2007 Part 3. Fixing and finishing separating and compartment walls and floors GG70/3 2007
Plastering and internal rendering Part 1. Design and specification GG65/1 2005 Part 2. Workmanship GG65/2 2005
Proprietary renders IP16/03 2003Repairing external rendering GG24 1995Replacing failed plaster GG7 1991Replacing plasterwork GR18 1998Selecting natural building stones DG420 1997
How to order • t: +44 (0)1344 328038
• f: +44 (0)1344 328005
• e: [email protected]
• www.brebookshop.com
Water supply, drainage and sanitation pack
AP266 £45 [£32.50]
Wind, floods and climate pack
AP267 £85 [£60]
Fire pack AP259 £50 [£35]
Bricks, mortar, render, plaster and stone pack
AP251 £70 [£50]
7 INDEX – JANUARY 2009
Composites, metals, paints, adhesives and sealants Advanced polymer composites in
construction IP7/99 1999Architectural use of polymer composites
DG442 1999Choosing wood adhesives DG340 1989Corrosion of metals by wood DG301
1985EN 927: the new European Standard for
exterior wood coatings DG466 2002Fibre reinforced polymer materials in
construction IP5/04 2004Fibre reinforced polymers in construction:
durability IP10/03 2003Fibre reinforced polymers in construction:
predicting weathering IP11/03 2003Internal painting: tips and hints GR19 1998Low-solvent primers: performance in construction steelwork IP16/00 2000Maintaining exterior wood finishes GG22 1995Painting exterior wood DG422 1997Planned maintenance painting: improving value for money IP7/03 2003Refixing ceramic wall tiles to internal walls GR29 2001Repair and maintenance of FRP structures GR34 2003Selecting building sealants with ISO 11600 DG463 2002Selecting gaskets for construction joints DG469 2002Stainless steel as a building material DG349 1989The performance and use of coatings with low solvent content IP8/99 1999The performance of fibre cement slates: effects of condensation IP19/01 2001Wood plastic composites and plastic lumber DG480 2004Wood plastic composites: market drivers and opportunities in Europe
IP2/04 2004Zinc-coated steel DG305 1986
Concrete Accelerated carbonation testing of
concrete IP20/00 2000Alkali-silica reaction in concrete
Part 1. Background to the guidance notes DG330/1 2004 Part 2. Detailed guidance for new construction DG330/2 2004 Part 3. Worked examples DG330/3 2004 Part 4. Simplified guidance for new construction using normal reactivity aggregates DG330/4 2004
Blastfurnace slag and steel slag: their use as aggregates IP18/01 2001
Carbonation of concrete and its effect on durability DG405 1995Cements with lower environmental impact IP7/08 2008*Concrete in aggressive ground. SD1, 2005 edition*Concrete strength: the effect of ocean-depth water pressure IP6/00 2000Concretes with high ggbs contents for use in hard/firm secant piling
IP17/05 2005Concrete with minimal or no primary aggregate content: the MAGCON
pilot study IP12/04 2004Corrosion of reinforcement in concrete: electrochemical monitoring
DG434 1998Corrosion of steel in concrete
Part 1. Durability of reinforced concrete structures DG444/1 2000 Part 2. Investigation and assessment DG444/2 2000 Part 3. Protection and remediation DG444/3 2000
Corrosion of steel in concrete: a review of the effect of humidity DG491 2004Corrosion of steel in concrete: service life design and prediction DG455 2001Delayed ettringite formation: in-situ concrete IP11/01 2001Deterioration of cement-based building materials: lessons learnt IP4/03 2003Durability of precast HAC concrete in buildings IP8/00 2000HAC concrete in the UK: assessment, durability management,
maintenance and refurbishment. SD3 2002*Innovation in concrete frame construction IP11/05 2005Marine aggregates in concrete DG507 2008Minimising the risk of alkali-silica reaction: alternative methods IP1/02 2002Porous aggregates in concrete
Part 1. Jurassic limestones IP9/01 2001 Part 2. Sandstones from NW England IP6/04 2004
Recycled aggregates DG433 1998
Reinforced autoclaved aerated concrete panels: test results, assessment and design IP7/02 2002
Reinforced concrete service life design Part 1. Overview IP3/06/1 2006 Part 2. Design for durability IP3/06/2 2006 Part 3. Service life forecasting and enhancement IP3/06/3 2006
Self-compacting concrete IP3/04 2004Shrinkage of natural aggregates in concrete DG357 1991Tension tests for concrete DG451 2000Volumetric strain of concrete under uniaxial compression: sustained
loading and high grade concrete IP15/02 2002Water reducing admixtures in concrete IP15/00 2000
Timber Advances in timber grading DG445 2000Best practice of timber waste management
IP9/03 2003Design of timber floors to prevent decay
DG364 1991Dry rot: its recognition and control
DG299 1993Durability of timber in ground contact
IP14/01 2001European Standards for wood
preservatives and treated wood IP1/03 2003
Evaluating joinery preservatives: performance prediction using BS EN 330 L-joint trials IP2/01 2001
Five-storey timber-frame hall of residence: a reconstruction case study IP19/00 2000
Green gluing of timber: a feasibility study IP10/05 2005Guide to machine strength grading of timber DG476 2003Hardwoods for construction and joinery: current and future sources of
supply DG417 1996Hardwoods for joinery and construction
Part 1. Technical assessment methods DG431/1 1998 Part 2. Test results and recommendations DG431/2 1998 Part 3. Test results and recommendations DG431/3 1998
Identifying damage by wood-boring insects DG307 2003Incising UK-grown Sitka spruce IP13/05 2005Insecticidal treatments against wood-boring insects DG327 1992Insulation of timber-frame construction: U-values and regulations for the
UK, Republic of Ireland and Isle of Man SD7 2008*Preservative treated timber: the UK’s code of best practice IP13/01 2001Preservative-treated timber: ensuring conformity with European Standards
IP6/99 1999Specifying structural timber DG416 1996Termites and UK buildings
Part 1. Biology, detection and diagnosis DG443/1 1998 Part 2. Control and management of subterranean termites DG443/2 1998
The structural use of wood-based panels DG423 1997Timber bridges DG481 2004Timber for joinery DG407 1995Timber frame A guide to the construction process DG496 2005Timber frame construction: an introduction GG60 2004Timber-frame dwellings: section six of the Domestic Technical Handbook
(Scotland): Energy SD6 2008*Timber grading and scanning DG492 2005Timbers: their natural durability and resistance to preservative treatment
DG429 1998Using UK grown Douglas fir and larch timber for external cladding DG494 2005Using UK-grown Sitka spruce for exterior cladding DG500 2006Wet rots: recognition and control DG345 1989Wood-based panel products: their contribution to the conservation of
forest resources DG375 1992Wood-based panels
Part 1. Oriented strand board (OSB) DG477/1 2003 Part 2. Particleboard (chipboard) DG477/2 2003 Part 3. Cement-bonded particleboard DG477/3 2003 Part 4. Plywood DG477/4 2003 Part 5. Medium density fibreboard (MDF) DG477/5 2004 Part 6. Hardboard, medium board and softboard DG477/6 2004 Part 7. Selection DG477/7 2004
Wood-boring insect attack Part 1. Identifying and assessing damage GR13/1 1998 Part 2. Treating damage GR13/2 1998
Wood rot: assessing and treating decay GR12 1997
Composites, metals, paints, adhesives and sealants pack
AP253 £70 [£50]
Concrete pack AP254 £95 [£67.50]
Timber pack AP265 £130 [£90]
8 INDEX – JANUARY 2009
GOOD REPAIR GUIDES GR1 Cracks caused by foundation movement 1996 aGR2 Damage to buildings caused by trees 1996 aGR3 Repairing damage to brick and block walls 1996 aGR4 Replacing masonry wall ties 1996 aGR5 Diagnosing the causes of dampness 1997 aGR6 Treating rising damp in houses 1997 aGR7 Treating condensation in houses 1997 aGR8 Treating rain penetration in houses 1997 aGR9 Repairing and replacing rainwater goods 1997 aGR10 Repairing timber windows b
Part 1. Investigating defects and dealing with water leakage 1997 Part 2. Draughty windows, condensation in sealed units, operating problems, deterioration of frames 1997
GR11 Repairing flood damage 1997 e Part 1. Immediate action Part 2. Ground floors and basements Part 3. Foundations and walls Part 4. Services, secondary elements, finishes, fittings
GR12 Wood rot: assessing and treating decay 1997 aGR13 Wood-boring insect attack c
Part 1. Identifying and assessing damage 1998 Part 2. Treating damage 1998
GR14 Re-covering pitched roofs 1998 aGR15 Repairing chimneys and parapets 1998 aGR16 Flat roofs 1998 d
Part 1. Assessing bitumen felt and mastic asphalt roofs for repair Part 2. Repairs to bitumen felt and mastic asphalt roofs
GR17 Repairing and replacing ground floors 1998 aGR18 Replacing plasterwork 1998 aGR19 Internal painting: tips and hints 1998 aGR20 Repairing frost damage 1998 b
Part 1. Roofing Part 2. Walls
GR21 Improving ventilation in housing 1998 aGR22 Improving sound insulation 1999 b
Part 1. Diagnosis Part 2. Treatment
GR23 Treating dampness in basements 1999 aGR24 Repointing external brickwork walls 1999 aGR25 Supporting temporary openings 1999 aGR26 Improving energy efficiency 1999 a
Part 1. Thermal insulation Part 2. Boilers and heating systems, draughtstripping
GR27 Cleaning external walls of buildings d Part 1. Cleaning methods Part 2. Removing dirt and stains
GR28 Repairing brick and block freestanding walls 2000 aGR29 Refixing ceramic wall tiles to internal walls 2001 aGR30 Remedying condensation in domestic pitched tiled roofs 2001 bGR31 Hot air repair of PVC-U window and door frames 2001 aGR32 Dealing with noisy plumbing 2002 aGR33 Assessing moisture in building materials e
Part 1. Sources of moisture 2002 Part 2. Measuring moisture content 2002 Part 3. Interpreting moisture data 2002
GR34 Repair and maintenance of FRP structures 2003 aGR35 Earth, clay and chalk walls: Inspection and repair methods 2006 b
GOOD BUILDING GUIDESGG1 Repairing or replacing lintels 1992 bGG2 Surveying masonry chimneys for repair or rebuilding 1990 aGG6 Outline guide to assessment of traditional housing for
rehabilitation 1990 aGG7 Replacing failed plaster 1991 bGG8 Bracing trussed rafter roofs 1991 aGG9 Habitability guidelines for existing housing 1991 aGG10 Temporary support for openings in external walls: assessing
load 1992 aGG11 Supplementary guidance for assessment of timber-framed
houses: Part 1. Examination 1993 aGG12 Supplementary guidance for assessment of timber-framed
houses: Part 2. Interpretation 1993 aGG13 Surveying brick or blockwork freestanding walls 1992 aGG14 Building simple plan brick or blockwork freestanding walls 1994 bGG15 Providing temporary support during work on openings in
external walls 1992 bGG16 Erecting, fixing and strapping trussed rafter roofs 1993 bGG17 Freestanding brick walls: repairs to copings and cappings 1993 bGG18 Choosing external rendering 1994 aGG19 Building reinforced, diaphragm and wide plan freestanding
walls 1994 cGG20 Removing internal loadbearing walls in older dwellings 1999 bGG21 Joist hangers 1996 bGG22 Maintaining exterior wood finishes 1995 aGG23 Assessing external rendering for replacement or repair 1995 aGG24 Repairing external rendering 1995 bGG25 Buildings and radon 1996 c
GG26 Minimising noise from domestic fan systems: fan-assisted radon mitigation systems 1996 b
GG27 Building brickwork or blockwork retaining walls 1996 cGG28 Domestic floors: repairing or replacing floors and flooring
Part 1. Construction, insulation and damp-proofing 1997 Part 2. Concrete floors, screeds and finishes 1997 Part 3. Timber floors and decks 1997 Part 4. Magnesite, tiles, slabs and screeds 1997 Part 5. Wood blocks and suspended timber 1997
GG29 Connecting walls and floors d Part 1. A practical guide 1997 Part 2. Design and performance 1997
GG30 Carbon monoxide detectors 1999 aGG31 Insulated external cladding systems 1999 aGG32 Ventilating thatched roofs 1999 aGG33 Building damp-free cavity walls 1999 aGG34 Building in winter 1999 aGG35 Building without cold spots 1999 aGG36 Building a new felted flat roof 2000 aGG37 Insulating roofs at rafter level: sarking insulation 2000 bGG38 Disposing of rainwater 2000 aGG39 Simple foundations for low-rise housing e
Part 1. Site investigation 2000 Part 2. ‘Rule of thumb’ design 2000 Part 3. Groundworks: getting it right 2002
GG40 Protecting pipes from freezing 2000 aGG41 Installing wall ties 2000 aGG42 Reed beds d
Part 1. Application and specification 2000 Part 2. Design, construction and maintenance 2000
GG43 Insulated profiled metal roofs 2000 aGG44 Insulating masonry cavity walls d
Part 1. Techniques and materials 2000 Part 2. Principal risks and guidance 2000
GG45 Insulating ground floors 2001 bGG46 Domestic chimneys for solid fuel: flue design and installation 2001 aGG47 Level external thresholds: reducing moisture penetration and
thermal bridging 2001 bGG48 Installing domestic automatic door controls 2001 cGG49 Installing domestic automatic window controls 2001 cGG50 Insulating solid masonry walls 2002 bGG51 Ventilated and unventilated cold pitched roofs 2002 aGG52 Site-cut pitched timber roofs 2002 c
Part 1. Design 2002 Part 2. Construction 2002
GG53 Foundations for low-rise building extensions 2002 bGG54 Construction site communication d
Part 1. General 2003 Part 2. Masonry 2003
GG55 The Quality Mark Scheme 2003 aGG56 Offsite construction: an introduction 2003 bGG57 Construction and demolition waste (2 parts) 2003 dGG58 Thin layer mortar masonry 2003 bGG59 Building on brownfield sites b
Part 1. Identifying the hazards 2003 Part 2. Reducing the risks 2004
GG60 Timber frame construction: an introduction 2004 aGG61 Lighting e
Part 1. General principles 2004 Part 2. Domestic and exterior 2004 Part 3. Non-domestic 2004
GG62 Retro-installation of bed joint reinforcement in masonry 2004 bGG63 Climate change 2004 bGG64 Tiling and slating pitched roofs e
Part 1. Design criteria, underlays and battens 2005 Part 2. Plain and profiled clay and concrete tiles 2005 Part 3. Natural and manmade slates 2005
GG65 Plastering and internal rendering d Part 1. Design and specification 2005 Part 2. Workmanship 2005
GG66 Building masonry with lime-based mortars 2005 bGG67 Achieving airtightness 2006 e
Part 1. General principles Part 2. Guidance on techniques: floors, walls and roofs Part 3. Guidance on techniques - windows and doors, sealing methods and materials
GG68 Installing thermal insulation 2006 d Part 1. Good site practice Part 2. Good site practice
GG69 Loft conversion 2006 d Part 1. Structural considerations Part 2. Safety, insulation and services
GG70 Plasterboard 2007 e Part 1. Types and their applications Part 2. Fixing and finishing non-separating walls and floors Part 3. Fixing and finishing separating and compartmenting walls and floors
GG71 Working with local businesses and residents 2007 bGG72 Basement construction and waterproofing 2007 c Part 1. Site investigation and preparation Part 2. Construction, safety, insulation and servicesGG73 Radon protection for new domestic extensions and
conservatories with solid concrete ground floors 2008 bGG74 Radon protection for new dwellings 2008 b
(for price codes, see page 2)
(for price codes, see page 2)
9 INDEX – JANUARY 2009
POLLUTION CONTROL GUIDES AP160 Controlling particles, vapour and noise pollution from
construction sites 2003 (5 part set) £65 [£40]Also available separately at £15 [£10]PG1 Part 1. Pre-project planning and effective managementPG2 Part 2. Site preparation, demolition, earthworks and landscaping PG3 Part 3. Haulage routes, vehicles and plantPG4 Part 4. Materials handling, storage, stockpiles, spillage and disposalPG5 Part 5. Fabrication processes and internal and external finishes
IN-SITU GROUND TESTING AP159 A simple guide to in-situ ground testing 2003 (7 part set)
£37.50 [£27.50]Also available separately at £9 [£7.50]IS1 Part 1. What is it and why do it?IS2 Part 2. Cone penetration testingIS3 Part 3. Flat dilatometer testingIS4 Part 4. Dynamic probingIS5 Part 5. Pressuremeter testingIS6 Part 6. Large-diameter plate loading testsIS7 Part 7. Geophysical testing
DG12 Structural design in architecture 1969r b DG145 Heat losses through ground floors 1984r aDG161 Reinforced plastics cladding panels 1973 bDG162 Traffic noise and overheating in offices 1973 aDG163 Drying out buildings 1973 aDG180 Condensation in roofs 1986r aDG208 Increasing the fire resistance of existing timber floors 1988 b DG217 Wall cladding defects and their diagnosis 1977 bDG223 Wall cladding: designing to minimise defects due to
inaccuracies and movements 1978 bDG227 Estimation of thermal and moisture movements and stresses:
Part 1. 1978 bDG228 Estimation of thermal and moisture movements and stresses:
Part 2. 1978 bDG240 Low-rise buildings on shrinkable clay soils: Part 1. 1993E aDG241 Low-rise buildings on shrinkable clay soils: Part 2.1990r aDG245 Rising damp in walls: diagnosis and treatment 2007E bDG248 Sanitary pipework: Part 1. Design basis 1981 aDG249 Sanitary pipework: Part 2. Design of pipework 1981 bDG251 Assessment of damage in low-rise buildings 1990E, 1995r bDG254 Reliability and performance of solar-collector systems 1981 bDG268 Common defects in low-rise traditional housing 1988r bDG273 Perforated clay bricks 1983 bDG282 Structural appraisal of buildings with long-span roofs 1984 aDG284 Wind loads on canopy roofs 1986E aDG288 Dust explosions 1984 bDG292 Access to domestic underground drainage systems 1985 bDG293 Improving the sound insulation of separating walls and floors
1985 a DG294 Fire risks from combustible cavity insulation 1985 aDG295 Stability under wind load of loose-laid external roof insulation
boards 1985 aDG297 Surface condensation and mould growth in traditionally-built
dwellings 1990r bDG298 Low-rise building foundations: the influence of trees in clay
soils 1999E bDG299 Dry rot: its recognition and control 1993r bDG301 Corrosion of metals by wood 1985 aDG302 Building overseas in warm climates 1985 bDG305 Zinc-coated steel 1986 aDG307 Identifying damage by wood-boring insects 1996r bDG308 Unvented domestic hot water systems 1986 bDG309 Estimating daylight in buildings 1986 bDG311 Wind scour of gravel ballast on roofs 1986 aDG312 Flat roof design: the technical options 1986 bDG318 Site investigation for low-rise building: desk studies 1987 cDG320 Fire doors 1988E bDG322 Site investigation for low-rise building: procurement 1987 bDG324 Flat roof design: thermal insulation 1987 cDG327 Insecticidal treatments against wood-boring insects 1993r bDG329 Installing wall ties in existing construction 2000E dDG330 Alkali-silica reaction in concrete 2004
Part 1. Background to the guidance notes b Part 2. Detailed guidance for new construction c Part 3. Worked examples b Part 4. Simplified guidance for new construction using normal reactivity aggregates a
DG335 Electrical interference in buildings 1988 bDG336 Swimming pool roofs: minimising the risk of condensation
using warm-deck roofing 1989 bDG337 Sound insulation: basic principles 1994 bDG338 Insulation against external noise 1989 bDG339 Condensing boilers 1990r bDG340 Choosing wood adhesives 1989 bDG343 Simple measuring and monitoring of movement in low-rise
buildings: Part 1. Cracks 1989 bDG344 Simple measuring and monitoring of movement in low-rise
buildings: Part 2. Settlement, heave and out-of-plumb 1995r aDG345 Wet rots: recognition and control 1989 c
DG346 The assessment of wind loads Part 1. Background and method 1992r b Part 2. Classification of structures 1989 a Part 3. Wind climate in the United Kingdom 1992r a Part 4. Terrain and building factors and gust peak factors 1992r a Part 5. Assessment of wind speed over topography 1989 b Part 6. Loading coefficients for typical buildings 1989 b Part 7. Wind speeds for serviceability and fatigue assessments 1989 a Part 8. Internal pressures 1990 a
DG348 Site investigation for low-rise building: the walk-over survey 1989 bDG349 Stainless steel as a building material 1989 aDG350 Climate and site development e
Part 1. General climate of the UK 1990 Part 2. Influence of microclimate 1990 Part 3. Improving microclimate through design 1990
DG351 Re-covering old timber roofs 1990 aDG352 Underpinning 1993r bDG355 Energy efficiency in dwellings 1990 bDG357 Shrinkage of natural aggregates in concrete 1991 aDG358 CFCs in buildings 1992E bDG359 Repairing brick and block masonry 1991 bDG360 Testing bond strength of masonry 1991 bDG361 Why do buildings crack? 1991 cDG362 Building mortar 1991 bDG364 Design of timber floors to prevent decay 1991 aDG365 Soakaway design 2007 r bDG366 Structural appraisal of existing buildings for change of use 1991 bDG367 Fire modelling 2004 bDG369 Interstitial condensation and fabric degradation 1992 bDG370 Control of lichens, moulds and similar growths 1992 aDG374 Relocatable buildings: structural design, construction and
maintenance 1992 bDG375 Wood-based panel products: their contribution to the
conservation of forest resources 1992 aDG377 Selecting windows by performance 1992 bDG379 Double glazing for heat and sound insulation 1993 bDG380 Damp-proof courses 1993 bDG381 Site investigation for low-rise building: trial pits 1993 cDG382 New materials in hot climates 1993 cDG383 Site investigation for low-rise building: soil description 1993 cDG386 Monitoring building and ground movement by precise
levelling 1994 bDG390 Wind around tall buildings 1994 cDG395 Slurry trench cut-off walls to contain contamination 1994 bDG398 Continuous mechanical ventilation in dwellings: design,
installation and operation 1994 bDG399 Natural ventilation in non-domestic buildings 1994 bDG401 Replacing wall ties 1995 cDG402 Static load testing: concrete floor and roof structures within
buildings 1995 bDG403 Damage to structures from ground-borne vibration 1995 bDG404 PVC-U windows 1995 bDG405 Carbonation of concrete and its effect on durability 1995 bDG406 Wind actions on buildings and structures 1995 bDG407 Timber for joinery 1995 bDG409 Masonry and concrete structures: measuring in-situ stress and
elasticity using flat jacks 1995 bDG411 Site investigation for low-rise buildings: direct investigations 1996 cDG412 Desiccation in clay soils 1996 cDG415 Reducing the risk of pest infestations in buildings 1996 bDG416 Specifying structural timber 1996 bDG417 Hardwoods for construction and joinery: current and future
sources of supply 1996 cDG418 Bird, bee and plant damage to buildings 1996 bDG419 Flat roof design: bituminous roofing membranes 1996 bDG420 Selecting natural building stones 1997 bDG421 Measuring the compressive strength of masonry materials: the
screw pull-out test 1997 aDG422 Painting exterior wood 1997 bDG423 The structural use of wood-based panels 1997 bDG424 Installing BMS to meet electromagnetic compatibility
requirements 1997 c
DIGESTSCurrent titles showing date of latest revision: r=minor revision, E=new edition (for price codes, see page 2)
10 INDEX – JANUARY 2009
Expert packs for the built environmentProfessional and valuable advice from BRE’s experts
Provide guidance and advice on a wide variety of topics at affordable prices.
Include important published titles from industry experts at BRE.
Presented in a reader friendly way with numerous illustrations and diagrams.
Collated in a ring binder for ease of use allowing content to be easily updated.
19 subject specific titles available!
Expert packs:
Choose from 19 specific industry topics:
Ref code Title No of leaflets Full price BRE Connect priceAP250 Air quality, radon and ventilation 26 £85 £60
AP251 Bricks, mortar, render, plaster and stone 23 £70 £50
AP252 Building design 35 £95 £67.50
AP253 Composites, metals, paints, adhesives and sealants 23 £70 £50
AP254 Concrete 34 £95 £67.50
AP255 Condensation and dampness 20 £50 £35
AP256 Doors, windows, glazing and cladding 23 £70 £50
AP257 Electrical, lighting, acoustics and control systems 33 £95 £67.50
AP258 Energy, insulation and air conditioning 23 £70 £50
AP259 Fire 16 £50 £35
AP260 Floors, flooring and stairs 13 £45 £32.50
AP261 Masonry, walls and chimneys 43 £130 £90
AP262 Procurement, maintenance, site organisation and waste management 25 £70 £50
AP263 Roofs and roofing 29 £85 £60
AP264 Soils, ground investigation and foundations 44 £130 £90
AP247 Sustainability and green issues 21 £50 £35
AP265 Timber 43 £130 £90
AP266 Water supply, drainage and sanitation 15 £45 £32.50
AP267 Wind, floods and climate 30 £85 £60
Each expert pack worth at
least £200
For more information and a list of each pack’s contents visit www.ihsbrepress.com and search by the code e.g. AP247
Call us today on 01344 328038
to order your copies!
11 INDEX – JANUARY 2009
DG425 Lists of excluded materials: a change in practice 1997 aDG426 The response of structures to dynamic crowd loads 2004 cDG427 Low-rise buildings on fill e Part 1. Classification and load-carrying characteristics 1998 Part 2. Site investigation, ground movement and foundation
design 1998 Part 3. Engineered fill 1998DG428 Protecting buildings against lightning 1998 bDG429 Timbers: their natural durability and resistance to preservative
treatment 1998 bDG430 Plastics external glazing 1998 aDG431 Hardwoods for joinery and construction 1998 Part 1. Technical assessment methods a Part 2. Test results and recommendations d Part 3. Test results and recommendations dDG432 Aircrete: thin joint mortar systems 1998 bDG433 Recycled aggregates 1998 aDG434 Corrosion of reinforcement in concrete: electrochemical
monitoring 1998 cDG436 Wind loading on buildings Part 1. Brief guidance for using BS 6399-2:1997 1999 d Part 2. BS 6399-2:1997 worked examples – effective wind
speeds for a site, and loads on a two-storey house 1999 c Part 3. BS 6399-2:1997 worked examples – loads on a portal
frame building and on an office tower on a podium 1999 cDG437 Industrial platform floors: mezzanine and raised storage 1999 dDG438 Photovoltaics: integration into buildings 1999 aDG439 Roof loads due to local drifting of snow 1999 cDG440 Weathering of white external PVC-U 1999 bDG441 Clay bricks and clay brick masonry (2 parts) 1999 dDG442 Architectural use of polymer composites 1999 cDG443 Termites and UK buildings d Part 1. Biology, detection and diagnosis 1999 Part 2. Control and management of subterranean termites 1999DG444 Corrosion of steel in concrete 2000 Part 1. Durability of reinforced concrete structures c Part 2. Investigation and assessment d Part 3. Protection and remediation cDG445 Advances in timber grading 2000 aDG446 Assessing environmental impacts of construction Industry
consensus, BREEAM and UK Ecopoints 2000 cDG447 Waste minimisation on a construction site 2000 bDG448 Cleaning buildings: legislation and good practice 2000 bDG449 Cleaning exterior masonry e
Part 1. Developing and implementing a strategy 2000 Part 2. Methods and materials 2000
DG450 Better building – integrating the supply chain: a guide for clients and their consultants 2000 c
DG451 Tension tests for concrete 2000 dDG452 Whole life costing and life-cycle assessment for sustainable
building design 2000 bDG453 Insulating glazing units 2000 cDG454 Thermal mass in office buildings e
Part 1. An introduction 2001 Part 2. Design criteria 2001
DG455 Corrosion of steel in concrete: service life design and prediction 2001 c
DG456 Prefabricated power cabling for buildings: procuring, installing and testing 2001 a
DG457 The Carbon Performance Rating for offices 2001 cDG458 Safe as houses? 2001 bDG459 Construction logistics: an introduction 2001 cDG460 Bricks, blocks and masonry made from aggregate concrete e
Part 1. Performance requirements 1901 Part 2. Appearance and environmental aspects 2001
DG461 Corrosion of metal components in walls 2001 bDG462 Steel structures supporting composite floor slabs: design for fire 2001cDG463 Selecting building sealants with ISO 11600 2002 aDG464 VOC emissions from building products e
Part 1. Sources, testing and emission data 2002 Part 2. Control, evaluation and labelling schemes 2002
DG465 U-values for light steel-frame construction 2002 cDG466 EN 927: the new European Standard for exterior wood
coatings 2002 bDG467 Slate and tile roofs: avoiding damage from aircraft wake
vortices 2002 cDG468 AAC ‘aircrete’ blocks and masonry (2 parts) 2002 eDG469 Selecting gaskets for construction joints 2002 cDG470 Life cycle impacts of timber: a review of the environmental
impacts of wood products in construction 2002 bDG471 Low-rise building foundations on soft ground 2002 cDG472 Optimising ground investigation 2002 bDG474 Handover of Office Building Operations protocol 2002 cDG475 Tilt of low-rise buildings with particular reference to
progressive foundation movement 2003 bDG476 Guide to machine strength grading of timber 2003 c
DG477 Wood-based panels Part 1. Oriented strand board (OSB) 2003 a Part 2. Particleboard (chipboard) 2003 b Part 3. Cement-bonded particleboard 2003 c Part 4. Plywood 2003 d Part 5. Medium density fibreboard (MDF) 2004 c Part 6. Hardboard, medium board and softboard 2004 c Part 7. Selection 2004 d
DG478 Building performance feedback: getting started 2003 cDG479 Timber piles and foundations 2004 cDG480 Wood plastic composites and plastic lumber 2004 aDG481 Timber bridges 2004 cDG482 Contaminated land: ingress of organic vapours into buildings 2004bDG483 Wind loads on temporary stage decks 2004 cDG484 Structural fire engineering design: introduction 2004 aDG485 Structural fire engineering design: fire development 2004 aDG486 Reducing the effects of climate change by roof design 2004 aDG487 Structural fire engineering design 2004
Part 1. Materials behaviour: concrete b Part 2. Materials behaviour: steel b Part 3. Materials behaviour: masonry c Part 4. Materials behaviour: timber a
DG488 Structural fire engineering design: fire and thermal response 2004 b
DG489 Wind loads on roof-based photovoltaic systems 2004 bDG490 Structural fire engineering design: aspects of life safety 2004 dDG491 Corrosion of steel in concrete: a review of the effect of
humidity 2004 bDG492 Timber grading and scanning 2005 cDG493 Safety considerations in designing roofs 2005 aDG494 Using UK-grown Douglas fir and larch timber for external
cladding 2005 aDG495 Mechanical installation of roof-mounted photovoltaic systems
2005 aDG496 Timber frame buildings. A guide to the construction process
2005 cDG497 Factory glazed windows 2005
Part 1. Introduction and the glazing process c Part 2. Transport, storage and installation b
DG498 Selecting lighting controls 2006 bDG499 Designing roofs for climate change: Modifications to good
practice guidance 2006 bDG500 Using UK-grown Sitka spruce for exterior cladding 2006 bDG501 BR135: Annex B Performance criteria and classification
method for BS 8414-2:2005 aDG502 Principles of masonry conservation management 2007 bDG503 External timber structures: preservative treatment and
durability 2007 bDG504 Modified wood: an introduction to products in UK construction
2007 cDG505 Access to buildings 2008 cDG506 Security fog generators 2008 aDG507 Marine aggregates in concrete 2008 aDG508 Conservation and cleaning of masonry (Part1. Stonework) 2008 d
SPECIAL DIGESTSSD1 Concrete in aggressive ground 2005 edition £60 [£40]SD2:2006 Timber frame dwellings. Conservation of fuel and power:
AD L1A guidelines Second edition 2006 £30 [£20]SD3 HAC concrete in the UK: assessment, durability management,
maintenance and refurbishment 2002 £27.50 [£17.50]SD4:2007 Masonry walls and beam-and-block floors U-values and
building regulations. Second edition 2007 £30 [£20]SD5 Wind loads on unclad structures 2004 £27.50 [£17.50]SD6 Timber-frame dwellings section six of the Domestic Technical
Handbook (Scotland): Energy 2008 £30.00 [£20.00]SD7 Insulation of timber-frame construction: U-values and
regulations for the UK, Republic of Ireland and Isle of Man 2008 £22.50 [£15.00]
AP242 2006, CD-ROM, 1100pp, 978-1-86081-925-4, £100 + VAT
BRE GOOD BUILDING GUIDES AND GOOD REPAIR GUIDESBRE Good Building Guides, numbers 1–67, tell you how to
achieve good quality building. Drawing on BRE experience they provide clear technical advice and solutions covering a
range of subjects from roofing to offsite construction. BRE Good Repair Guides, numbers 1–34, are an extensively illustrated series of leaflets specifically designed to provide essential information on the identification, diagnosis and repair of defects.
The complete library of guides – worth over £900 – is now available
on CD-ROM for just £100!
12 INDEX – JANUARY 2009
Collated Series Ref AP243
£195[BRE Connect £135]
BRE Building ElementsTHE reference tool for the construction professional
Call +44 (0) 1344 328038 or email [email protected]
This indispensable series provides construction professionals with a comprehensive range of information about the main elements of building:
Building services (BR404) - £47.50
Floors and flooring (BR460) - £47.50
Foundations, basements and external works (BR440) - £47.50
Roofs and roofing (BR302) - £47.50
Walls, windows and doors (BR352) - £47.50
Understanding dampness (BR466) - £42.50
Each of the six books deals with the principles and reasons behind best practice. Over 1600 pages of extensively illustrated practical details, descriptions and practical advice.
•
•
•
•
•
•
WITHDRAWN DIGESTSIf a Digest has been replaced, its new number is shown in brackets. An asterisk* indicates that the replacement Digest has also been withdrawn.
1 66 (164)*, (165)* 131 201 (378)* 2782 67 132 202 279 Index 19833 68 133 203 280 (448), (449/1), (449/2)4 69 134 204 2815 (237)* 70 135 (153)* 205 283 (346/5)6 71 136 Index 1971 206 2857 72 137 207 Index 1977 286 (387)*8 73 (304)* 138 209 (340) 2879 74 Index 1966 139 (370) 210 28910 75 (361) 140 (379) 211 290 (332)*11 (52)* 77 (380) 141 (390) 212 291 Index 198413 (244)* 78 (170)* 142 (222)* 213 296 (429)14 79 143 (337) 214 30015 80 (248), (249) 144 215 303 Index 198516 (178)* 81 146 216 (331)* 30417 (178)* 82 (192)* 147 218 30618 (364) 83 148 Index 1972 219 Index 1978 31019 84 149 220 (320) 31320 85 150 (237)* 221 (312) 31421 86 Index 1967 151 (365) 222 (274)*, (275)*, (276)* 31522 87 (179)* 152 224 316 Index 198623 (127)* 88 (179)* 153 (185)* 225 31724 Index 1962 89 (362) 154 226 31925 (123)* 90 155 (220)* 229 321 (407)26 (123)* 91 (110)* 156 230 32327 (245) 92 (302) 157 231 Index 1974 32528 93 (224)* 158 232 32629 94 (224)* 159 Index 1973 233 328 Index 198730 95 (315)* 160 (362) 234 33131 96 (187)* 164 (441) 235 332 (439)32 (80)* 97 165 (441) 236 33333 98 166 (441) 237 (325)* 33434 (107)* 99 (119)* 167 238 (415) 341 Index 198935 (357) 100 Index 1968 168 (169) 239 34236 101 (119)* 170 242 34737 102 (252)* 171 Index 1974 243 Index 1980 353 (403)38 103 (266)* 172 244 (326)* 354 (422)39 (93)*, (94)* 104 173 (260)* 246 356 Index 199040 105 (119)* 174 (250)* 247 (447) 363 Special Digest 141 (309), (310)* 106 (261)* 175 (340) 250 (363)* 368 Index 199142 (309), (310)* 107 (188)*, (189)* 176 252 (333)* 37143 108 177 253 37244 109 178 (342)* 255 Index 1981 37345 110 179 256 376 (397)*46 111 181 257 (329) 37847 112 Index 1969 182 (286)* 258 (330) 384 Index 199348 113 (280)* 183 Index 1975 259 38549 (213)* 114 (234)* 184 260 (396)* 38750 Index 1964 115 (248), (249) 185 261 (396)* 38851 116 (168)*, (169) 186 261 (354)* 38952 117 (278)* 187 (347)* 262 (377) 391 (467)53 118 (278)* 188 263 (444/1), (444/2), (444/3) 392 Special Digest 354 119 (346) 189 264 (444/1), (444/2), (444/3) 39355 120 190 265 (444/1), (444/2), (444/3) 39456 121 (349) 191 266 (334)* 39657 122 192 267 Index 1982 39758 (160)* 123 193 269 (420) 40059 124 Index 1970 194 270 40860 125 195 Index 1976 271 41061 (246)* 126 196 (410)* 272 413 (IP10/96)62 Index 1964 127 197 274 (427) 414 Index 199663 128 (338) 198 275 (427) 473 (507)64 129 (338) 199 276 SD2 SD2 200665 (164)*, (165)* 130 200 (359) 277 SD4 SD4 2007
13 INDEX – JANUARY 2009
INFORMATION PAPERS Published since January 1994. Earlier titles are listed at www.ihsbrepress.com
IP1/95 Cockroach infestation of dwellings in the UK aIP2/95 Guidance for engineers conducting static load tests on building
structures aIP3/95 Comfort, control and energy efficiency in offices aIP4/95 A guide to the development of BREDEM aIP5/95 Testing the performance of terminals for ventilation systems,
chimneys and flues aIP6/95 Flow resistance and wind performance of some common
ventilation terminals aIP7/95 Bituminous roofing membranes: performance in use aIP8/95 Interior painting of trim with solvent-borne paints aIP9/95 Destratification of air in industrialised buildings aIP10/95 Daylighting design for display screen equipment aIP11/95 Control of biological growths on stone aIP12/95 Controlling mould growth by using fungicidal paints aIP13/95 The passive gas tracer method for monitoring ventilation rates
in buildings aIP14/95 Phase-out of CFCs and HCFCs: options for owners and
operators of air conditioning systems aIP15/95 Potential carbon emission savings from energy efficiency in
housing aIP16/95 The safety and environmental requirements of new refrigerants a
IP1/96 Management of construction and demolition wastes aIP2/96 An assessment of exterior medium density fibreboard (MDF) aIP3/96 Potential carbon emission savings from energy efficiency in
commercial buildings aIP4/96 Potential carbon emission savings from combined heat and
power in buildings aIP5/96 Progress in European standardisation for exterior wood
coatings aIP6/96 People and lighting controls aIP7/96 Testing anti-carbonation coatings for concrete aIP8/96 Moisture resistance of laminated veneer lumber (LVL) aIP9/96 Preservative-treated timber: checking compliance with new
European Standards aIP10/96 Reinforced autoclaved aerated concrete planks designed
before 1980 a
IP1/97 Unvented hot water storage systems: microbial growth in expansion vessels a
IP2/97 Magnetic fields and building services aIP3/97 Demonstration of re-use and recycling of materials: BRE
energy efficient office of the future aIP4/97 Preservative-treated timber for exterior joinery: applying the
new European Standards aIP5/97 Building on fill: collapse compression on inundation aIP6/97 External claddings using thin stone aIP7/97 Energy use and carbon dioxide emissions for UK housing: two
possible scenarios aIP8/97 Water conservation a Part 1. A guide for designers of low flush WCs Part 2. A guide for installation and maintenance of low flush WCs IP9/97 Emergency lighting and wayfinding systems for visually
impaired people aIP10/97 Assessment of emergency wayfinding lighting systems in smoke IP11/97 Progress in European standardisation for the protection and
repair of concrete aIP12/97 Plastics recycling in the construction industry a
IP1/98 Magnesian limestone aggregate in concrete aIP2/98 Mortars for blockwork: improved thermal performance aIP3/98 Daylight in atrium buildings aIP4/98 Night ventilation for cooling office buildings aIP5/98 Metal cladding: assessing thermal performance aIP6/98 Performance of air-conditioning systems with alternative
refrigerants aIP7/98 External cladding: how to determine the thickness of natural
stone panels aIP8/98 Reducing kiln-drying twist of Sitka spruce aIP9/98 Energy efficient concrete walls using EPS permanent formwork aIP10/98 Resistance of masonry paints to microbial attack aIP11/98 Assessing carbonation depth in ageing high alumina cement
concrete aIP12/98 Trickle ventilators in offices aIP13/98 Eurocode 1 a Part 1. The structural loading basis of design, dead,
imposed, fire, snow and wind loads Part 2. The code for structural loading IP14/98 Blocks with recycled aggregates: beam-and-block floors aIP15/98 Water conservation aIP16/98 Interior lighting calculations: a guide to computer programs aIP17/98 Use of lightweight veneer stone cladding panels aIP18/98 Stone cladding panels: in-situ weathering a
IP1/99 Untied cavity party walls: structural performance when using AAC blockwork b
IP2/99 Photoelectric control of lighting: design, setup and installation issues b
IP3/99 Structural Eurocodes: their adoption in the UK aIP4/99 Ventilators: ventilation and acoustic effectiveness bIP5/99 Humidistat controlled extract fans: performance in dwellings bIP6/99 Preservative-treated timber: ensuring conformity with
European Standards aIP7/99 Advanced polymer composites in construction bIP8/99 The performance and use of coatings with low solvent content aIP9/99 Cleaning exterior masonry: pretreatment assessment of a stone
building aIP10/99 Cleaning exterior masonry: assessing cleaning of a brick-built
church a
IP1/00 Airtightness in UK dwellings bIP2/00 Water conservation: low-flow showers and flow restrictors aIP3/00 Temporary demountable grandstands: dynamic response bIP4/00 Retractable grandstands: dynamic response bIP5/00 Permanent cantilever grandstands: dynamic response bIP6/00 Concrete strength: the effect of ocean-depth water pressure aIP7/00 Reclamation and recycling of building materials: industry
position report bIP8/00 Durability of precast HAC concrete in buildings bIP9/00 Developments in innovative lighting aIP10/00 Flooring, paving and setts: requirements for safety in use bIP11/00 Ties for masonry walls: a decade of development bIP12/00 Positive input ventilation bIP13/00 Green buildings revisited c Part 1. Small projects Part 2. Large projects IP14/00 Hospitals in the best light: an introduction to hospital lighting bIP15/00 Water reducing admixtures in concrete aIP16/00 Low-solvent primers: performance in construction steelwork aIP17/00 Advanced technologies for 21st century building services bIP18/00 Ammonia refrigerant in buildings: minimising the hazards aIP19/00 Five-storey timber-frame hall of residence: a reconstruction
case study bIP20/00 Accelerated carbonation testing of concrete cIP21/00 Air as a refrigerant in air conditioning systems in buildings a
IP1/01 Environmental benchmarking for property portfolio managers bIP2/01 Evaluating joinery preservatives: performance prediction using
BS EN 330 L-joint trials aIP3/01 Dynamic stiffness of wall ties used in masonry cavity walls:
measurement procedure bIP4/01 Reducing impact and structure-borne sound in buildings bIP5/01 Solar energy in urban areas aIP6/01 Modelling the performance of thermal mass cIP7/01 Local authorities’ performance on sustainable construction bIP8/01 Weathering of plastics pipes and fittings aIP9/01 Porous aggregates in concrete: Jurassic limestones bIP10/01 Lightweight veneer stone cladding panels aIP11/01 Delayed ettringite formation: in-situ concrete bIP12/01 Hot air repair of PVC-U profiles aIP13/01 Preservative treated timber: the UK’s code of best practice aIP14/01 Durability of timber in ground contact bIP15/01 Standardised and prefabricated wiring for buildings (2 parts) cIP16/01 Prefabricated housing in the UK d
Part 1. A case study – Murray Grove, Hackney Part 2. A case study – CASPAR II, Leeds Part 3. A summary paper
IP17/01 Assessing the effects of thermal bridging at junctions and around openings b
IP18/01 Blastfurnace slag and steel slag: their use as aggregates bIP19/01 The performance of fibre cement slates: effects of
condensation aIP20/01 Temperature and humidity in batten voids cIP21/01 Sustainability indicators for utilities b
IP1/02 Minimising the risk of alkali-silica reaction: alternative methods bIP2/02 Whole life performance of domestic automatic door controls dIP3/02 Whole life performance of domestic automatic window
controls dIP4/02 Loads generated by jumping crowds: experimental assessment cIP5/02 Dwellings and energy efficient lighting: new regulation Part L aIP6/02 Free cooling with displacement ventilation bIP7/02 Reinforced autoclaved aerated concrete panels: test results,
assessment and design bIP8/02 Construction site packaging wastes: a market position report bIP9/02 Refurbishment or redevelopment of office buildings? d
Part 1. Sustainability comparisons Part 2. Sustainability case histories
IP10/02 Metal cladding: assessing the thermal performance of built-up systems which use ‘Z’ spacers b
IP11/02 Retrofitting solar shading aIP12/02 Control of solar shading b
(for price codes, see page 2)
14 INDEX – JANUARY 2009
IP13/02 Sustainability lessons from private finance and similar private initiatives b
IP14/02 Dealing with poor sound insulation between new dwellings aIP15/02 Volumetric strain of concrete under uniaxial compression:
sustained loading and high grade concrete aIP16/02 Electronic tagging and wireless technologies
Part 1. Application in the construction industry a Part 2. An overview a
IP1/03 European Standards for wood preservatives and treated wood aIP2/03 Background ventilators for dwellings aIP3/03 Dynamic insulation for energy saving and comfort bIP4/03 Deterioration of cement-based building materials: lessons learnt aIP5/03 Precast Hollowcore slabs in fire aIP6/03 Improving air quality in homes with supply air windows aIP7/03 Planned maintenance painting: improving value for money bIP8/03 Helping visually impaired people in their homes: assistive
technology bIP9/03 Best practice of timber waste management cIP10/03 Fibre reinforced polymers in construction: durability bIP11/03 Fibre reinforced polymers in construction: predicting
weathering aIP12/03 VOC emissions from flooring adhesives: European test
methods and labelling bIP13/03 Sustainable buildings
Part 1. Benefits for occupiers a Part 2. Benefits for designers a Part 3. Benefits for investors and developers a Part 4. Benefits for constructors a
IP14/03 Preventing hot water scaldings in bathrooms: using TMVs bIP15/03 Propriety nosings for non-domestic stairs bIP16/03 Proprietary renders bIP17/03 Impact of horizontal shading devices on peak solar gains
through windows a
IP1/04 Drainage design for buildings with reduced water use aIP2/04 Wood plastic composites: market drivers and opportunities in Europe bIP3/04 Self-compacting concrete bIP4/04 Recycling fibre reinforced polymers in the construction industry aIP5/04 Fibre reinforced polymer materials in construction bIP6/04 Porous aggregates in concrete: sandstones from NW England aIP7/04 Designing roofs with safety in mind aIP8/04 Whole building commissioning d
Part 1. A guide for clients Part 2. A guide for designers Part 3. A guide for specifiers Part 4. A guide for facilities managers
IP9/04 Maintaining good air quality in your home aIP10/04 Whole Life Value: sustainable design in the built environment aIP11/04 Perimeter chilled beams cIP12/04 Concrete with minimal or no primary aggregate content: the
MAGCON pilot study bIP13/04 An introduction to building with Structural Insulated Panels
(SIPs) bIP14/04 Environmental sustainability in bridge management c
IP1/05 Impact standards for glass aIP2/05 Modelling and controlling interstitial condensation in buildings cIP3/05 Composting in construction cIP4/05 Costing sustainability: how much does it cost to achieve
BREEAM and EcoHomes ratings? aIP5/05 Self-sealing waste valves for domestic use: an assessment bIP6/05 Ventilation and indoor air quality in schools bIP7/05 Aircrete tongue and grooved block masonry bIP8/05 Development of sites containing expansive ferrous slags cIP9/05 Using small volume wastes in construction bIP10/05 Green gluing of timber: a feasibility study bIP11/05 Innovation in concrete frame construction aIP12/05 Small scale, building integrated wind power systems cIP13/05 Incising UK-grown Sitka spruce cIP14/05 Achieving cost effective responsive maintenance aIP15/05 The scope for reducing carbon emissions from housing bIP16/05 Domestic energy use and carbon emissions: scenarios to 2050 aIP17/05 Concretes with high ggbs contents for use in hard/firm secant
piling a
IP1/06 Assessing the effects of thermal bridging at junctions and around openings a
IP2/06 Rain noise from glazed and lightweight roofing aIP3/06 Reinforced concrete service life design
Part 1. Overview b Part 2. Design for durability a Part 3. Service life forecasting and enhancement b
IP4/06 Airtightness of ceilings: energy loss and condensation risk cIP5/06 Modelling condensation and airflows in pitched roofs cIP6/06 Balanced Value for sustainable procurement bIP7/06 Pruning trees to reduce water use: summaries of research;
conclusions and recommendations bIP8/06 Non-ferrous metal wastes as aggregates in highway construction bIP9/06 Refurbishing Victorian housing: guidance and assessment
method for sustainable refurbishment a
IP10/06 Pfa grouts for stabilising mine workings dIP1/07 Internet Protocol: an introductory guide bIP2/07 SBEM for non-domestic buildings cIP3/07 Modern methods of construction (MMC) in housing
Part 1. Drivers and barriers to their use a Part 2. Planning for manufactured housing a Part 3. Designing for manufacture b Part 4. Successful development and manufacture of MMC products b
IP4/07 Environmental weightings: their use in the environmental assessment of construction products b
IP5/07 Principal drivers for reusing foundations aIP7/07 Prefabricated relocatable extensions: evaluating their use for
people with disabilities bIP8/07 Self-sealing waste valves for domestic use: an assessment bIP9/07 Performance-based intervention for durable concrete repairs bIP10/07 Safer floors: guidance on specifying flooring for internal and
external safety in domestic buildings aIP11/07 Naturally innovative: using biomimetics in construction a
COMING SOONSOME TOPICS TO BE COVERED BY DIGESTS, INFORMATION PAPERS AND GOOD BUILDING GUIDES DURING 2009A guide to GreenPrint methodologyBetter BREEAM ratings Composite structural connections for combined seismic and fire performance Conservation and cleaning of masonry: brickwork Domestic sprinklers Electromagnetic compatibility in buildingsFire modelling applications Fire safety engineering in tunnels Fire suppression technology Good practice for installing automatic fire sprinkler systems Introduction of PV into non-domestic buildings Introduction to sprinkler systemsModelling convective heat transfer from building surfaces Radon – protective measures for workplaces Sanitary pipeworkSustainability through planning Service life and performance methodology of environmental profiles Silica fume concreteSmart Home technologies on the Innovation ParkWater mist systems
IP 1/08 The price of sustainable schools aIP 2/08 New build and refurbishment in the Sustainable Communities
Plan bIP 3/08 Delivering sustainability objectives through planning aIP 4/08 Micro-wind turbines on house roofs aIP 5/08 A guide to certification and approval for engineers and
designers bIP 6/08 Wireless fire detection systems and European regulations aIP 7/08 Cements with lower environmental impact aIP 8/08 Determining the minimum thermal resistance of cavity closers cIP 9/08 Applying the code for sustainable homes on the BRE
Innovation Park Part 1. Lessons learnt about building fabric b Part 2. Lessons learnt about energy sources, overheating and ventilation c Part 3. Lessons learnt about water use, harvesting, recycling and drainage b Part 4. Lessons learnt about architecture, construction and material sourcing b
IP10/08 Safe and secure town centres at night cIP11/08 Self-heating and spontaneous combustion aIP12/08 An introduction to PassivHaus bIP13/08 An introduction to intelligent buildings c
Part 1. Benefits and technology Part 2. Legislation, planning and design
IP14/08 Risks of dust fires and explosions b