index

BRITISH STANDARDS

BS 4:-Structural steel sections

BS 4-1:2005

Specification for hot-rolled sectionssupersedes BS 4-1:1993ISBN 0 580 46453 9

£32.00 members£64.00 non-members

ISE/13

BS 4551:2005

Mortar. Methods of test for mortar. Chemical analysis and physical testingsupersedes BS 4551-1:1998 and BS 4551-2:1998ISBN 0 580 46454 7


B/519/2

BS 5261:-

Copy preparation and proof correction

BS 5261-2:2005

Specification for typographic requirements, marks for copy preparation and proof correction, proofing proceduresupersedes BS 5261-2:1976ISBN 0 580 46570 5


PAI/43

BS 5261C:2005

Marks for copy preparation and proof correctionsupersedes BS 5261C:1976


PAI/43A fold-out card giving the marks specified in Table 1 of BS 5261-2, together with notes on their use. VAT is applicable to this item. Discounts are available for bulk orders (£42 for 10, £79 for 20, £189 for 50, £325 for 100).

BS 6001:-

Sampling procedures for inspection by attributes

BS 6001-4:2005

System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspectionpartially supersedes BS 6001-4:1994ISBN 0 580 46463 6


SS/5

BS 8432:2005Spinal orthoses. Guide to design

supersedes BS 5473:1977ISBN 0 580 46050 9


SS/5

BS 8440:-

Health informatics. Medical digital imaging. Profiles format

BS 8440-1:2005General principles

no current standard is supersededISBN 0 580 46549 7


IST/35

BS 8440-2:2005

Particular requirements for metadata profilesno current standard is supersededISBN 0 580 46550 0


IST/35

BS 8456:2005

Code of practice for design and installation of directional sounder evacuation systemsno current standard is supersededISBN 0 580 46416 4


CPL/34/9

BS EN PUBLICATIONS

BS EN 54:-

Fire detection and fire alarm systems

BS EN 54-13:2005

Compatibility assessment of system componentsno current standard is supersededISBN 0 580 46213 7


FSH/12,FSH/12/1

BS EN ISO 140:-

Acoustics. Measurement of sound insulation in buildings and of building elements

BS EN ISO 140-11:2005

Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floorsno current standard is supersededISBN 0 580 46445 8


EH/1/6

BS EN 1052:-Methods of test for masonry

BS EN 1052-5:2005

Determination of bond strength by the bond wrench methodno current standard is supersededISBN 0 580 46380 X


B/519

BS EN 1168:2005

Precast concrete products. Hollow core slabsno current standard is supersededISBN 0 580 46082 7


B/524

BS EN ISO 2063:2005

Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloyssupersedes BS EN 22063:1994ISBN 0 580 46219 6


STI/40

BS EN ISO 3815:-Zinc and zinc alloys

of 69BS EN PUBLICATIONS

BS EN ISO 3815-1:2005

Analysis of solid samples by optical emission spectrometrysupersedes BS EN 12019:1998 which remains currentISBN 0 580 46225 0


NFE/8

BS EN ISO 5983:-

Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein content

BS EN ISO 5983-1:2005Kjeldahl method

supersedes BS 5766-4:1998ISBN 0 580 46421 0


AW/10

BS EN ISO 5983-2:2005

Block digestion/steam distillation methodno current standard is supersededISBN 0 580 46420 2


AW/10

BS EN 10305:-

Steel tubes for precision applications. Technical delivery conditions

BS EN 10305-6:2005

Welded cold drawn tubes for hydraulic and pneumatic power systemssupersedes BS 6323-6:1982ISBN 0 580 46097 5


ISE/8

BS EN 10311:2005

Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquidspartially supersedes BS 534:1990ISBN 0 580 46124 6


ISE/8

BS EN ISO 10664:2005

Hexalobular internal driving feature for bolts and screwssupersedes BS EN ISO 10664:1999ISBN 0 580 46442 3


FME/9/2

BS EN ISO 11064:-

Ergonomic design of control centres

BS EN ISO 11064-6:2005

Environmental requirements for control centresno current standard is supersededISBN 0 580 46422 9


PH/9

BS EN ISO 12625:-Tissue paper and tissue products

BS EN ISO 12625-3:2005

Determination of thickness, bulking thickness and apparent bulk densitysupersedes BS EN 12625-3:1999ISBN 0 580 46435 0


PAI/11

BS EN ISO 12625-4:2005

Determination of tensile strength, stretch at break and tensile energy absorptionsupersedes BS EN 12625-4:1999ISBN 0 580 46436 9


PAI/11

BS EN ISO 12625-9:2005

Determination of ball burst strengthno current standard is supersededISBN 0 580 46437 7


PAI/11

BS EN 12629:-

Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety

BS EN 12629-6:2004

Stationary and mobile equipment for the manufacture of precast reinforced productsno current standard is supersededISBN 0 580 46113 0


MCE/3/7

BS EN 12697:-

Bituminous mixtures. Test methods for hot mix asphalt

BS EN 12697-43:2005Resistance to fuel



B/510/1

BS EN 12921:-

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours

BS EN 12921-4:2005

Safety of machines using halogenated solventsno current standard is supersededISBN 0 580 46359 1


MCE/3/8

BS EN 13060:2004Small steam sterilizers

supersedes BS 3970-4:1990ISBN 0 580 46187 4


LBI/35

BS EN 13367:2005

Ceramic machines. Safety. Transfer platforms and carsno current standard is supersededISBN 0 580 46428 8


MCE/3/14

BS EN 13630:-

Explosives for civil uses. Detonating cords and safety fuses


BS EN 13630-10:2005

Determination of initiating capability of detonating cordsno current standard is supersededISBN 0 580 46246 3


CII/61

BS EN 13796:-

Safety requirements for cableway installations designed to carry persons. Carriers

BS EN 13796-3:2005Fatigue tests



MCE/20

BS EN 13885:2005

Food processing machinery. Clipping machines. Safety and hygiene requirementsno current standard is supersededISBN 0 580 46254 4


MCE/3/5

BS EN 14336:2004

Heating systems in buildings. Installation and commissioning of water based heating systemspartially supersedes BS 5449:1990ISBN 0 580 46251 X


RHE/24

BS EN 14525:2004

Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cementno current standard is supersededISBN 0 580 46203 X


PSE/10

BS EN 14604:2005Smoke alarm devices

supersedes BS 5446-1:2000 which remains currentISBN 0 580 46651 5


FSH/12/2

BS EN ISO 14630:2005

Non-active surgical implants. General requirementssupersedes BS EN ISO 14630:1998ISBN 0 580 46223 4


CH/150

BS EN 14662:-

Ambient air quality. Standard method for measurement of benzene concentrations

BS EN 14662-5:2005

Diffusive sampling followed by solvent desorption and gas chromatographyno current standard is supersededISBN 0 580 46134 3


EH/2/3

BS EN 14666:2005

Surface active agents. Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules. Gas chromatographic methodno current standard is supersededISBN 0 580 46360 5


CII/34

BS EN 14712:2005

Surface active agents. Determination of physical stability in alkaline and acid solutionsno current standard is supersededISBN 0 580 46101 7


CII/34

BS EN 14733:2005

Bitumen and bituminous binders. Bituminous emulsions, fluxed and cut-back bitumen factory production controlno current standard is supersededISBN 0 580 46159 9


B/510/19

BS EN ISO 17707:2005

Footwear. Test methods for outsoles. Flex resistanceno current standard is supersededISBN 0 580 46424 5


TCI/69

BS EN 50131:-Alarm systems. Intrusion systems

BS EN 50131-5-3:2005

Requirements for interconnections equipment using radio frequency techniquesno current standard is supersededISBN 0 580 46135 1


GW/1

BS EN 50370:-

Electromagnetic compatibility (EMC). Product family standard for machine tools

BS EN 50370-1:2005Emission

no current standard is supersededISBN 0 580 46136 X


GEL/210/11

BS EN 60401:-

Terms and nomenclature for cores made of magnetically soft ferrites

BS EN 60401-1:2005

Terms used for physical irregularitiesno current standard is supersededISBN 0 580 46092 4


EPL/51

BS EN 60480:2004

Guidelines for the checking and treatment of sulphur hexafluoride (SF$d6) taken from electrical equipment and specification for its re-usepartially supersedes BS 5209:1975ISBN 0 580 45947 0


GEL/10


BS EN 60939:-

Passive filter units for electromagnetic interference suppression

BS EN 60939-2:2005

Sectional specification: passive filter units for which safety tests are appropriate. Test methods and general requirementssupersedes BS EN 133200:1999 which remains currentISBN 0 580 46032 0


EPL/40

BS EN 61241:-

Electrical apparatus for use in the presence of combustible dust

BS EN 61241-17:2005

Inspection and maintenance of electrical installations in hazardous areas (other than mines)partially supersedes BS EN 50281-1-2:1999, BS 6467-1:1985 and BS 6467-2:1988ISBN 0 580 46048 7


GEL/31/20

BS EN 61243:-Live working. Voltage detectors

BS EN 61243-1:2005

Capacitive type to be used for voltages exceeding 1 kV a.csupersedes BS EN 61243-1:1998ISBN 0 580 45943 8


PEL/78

BS EN 61249:-

Materials for printed boards and other interconnecting structures

BS EN 61249-2:-

Reinforced base materials, clad and unclad

BS EN 61249-2-1:2005

Phenolic cellulose paper reinforced laminated sheets, economic grade, copper cladno current standard is supersededISBN 0 580 45936 5


EPL/501

BS EN 61249-2-22:2005

Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-cladno current standard is supersededISBN 0 580 45928 4


EPL/501

BS EN 61249-2-23:2005

Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-cladno current standard is supersededISBN 0 580 45927 6


EPL/501

BS EN 61290:-Optical amplifiers. Test methods

BS EN 61290-11:-

Polarization mode dispersion parameter

BS EN 61290-11-2:2005

Poincare$1P sphere analysis methodno current standard is supersededISBN 0 580 46049 5


GEL/86/3

BS EN 61300:-

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures

BS EN 61300-2:-Tests

BS EN 61300-2-44:2005

Flexing of the strain relief of fibre optic devicesno current standard is supersededISBN 0 580 46047 9


GEL/86/2

BS EN 61754:-Fibre optic connector interfaces

BS EN 61754-21:2005

Type SMI connector family for plastic optical fibreno current standard is supersededISBN 0 580 46043 6


GEL/86/2

BS EN 62044:-

Cores made of soft magnetic materials. Measuring methods

BS EN 62044-2:2005

Magnetic properties at low excitation levelno current standard is supersededISBN 0 580 46042 8


EPL/51

BS EN 62115:2005Electric toys. Safety

supersedes BS EN 50088:1996 which remains currentISBN 0 580 46091 6


CPL/61/21

BS IMPLEMENTATIONS

BS ISO 248:2005

Rubber, raw. Determination of volatile-matter contentsupersedes BS 7164-6.1:1994ISBN 0 582 46505 5


PRI/23

BS ISO 727:-

Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure

BS ISO 727-2:2005Inch-based series

supersedes BS ISO 727-2:2002ISBN 0 580 46232 3


PRI/88/2

of 69BS IMPLEMENTATIONS

BS ISO 1830:2005

Paper, board and pulps. Determination of acid-soluble manganesesupersedes BS 4897-4:1983ISBN 0 580 46444 X


PAI/11

BS ISO 2108:2005

Information and documentation. International standard book number (ISBN)no current standard is supersededISBN 0 580 46234 X


IDT/2/18

BS ISO 3575:2005

Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualitiesno current standard is supersededISBN 0 580 46469 5


ISE/10

BS ISO 3865:2005

Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic materialsupersedes BS ISO 3865:1997ISBN 0 580 46389 3


PRI/22

BS ISO 4087:2005

Micrographics. Microfilming of newspapers for archival purposes on 35 mm microfilmsupersedes BS ISO 4087:1991ISBN 0 580 46429 6


IDT/1/2

BS ISO 4249:-

Motorcycle tyres and rims (code-designated series)

BS ISO 4249-3:2004Rims



AUE/4

BS ISO 5168:2005

Measurement of fluid flow. Procedures for the evaluation of uncertaintiessupersedes BS ISO TR 5168:1998ISBN 0 580 46279 X


CPI/30/9

BS ISO 6588:-

Paper, board and pulps. Determination of pH of aqueous extracts

BS ISO 6588-1:2005Cold extraction

partially supersedes BS 2924-1:1983ISBN 0 580 46438 5


PAI/11

BS ISO 7141:2005

Road vehicles. Light alloy wheels. Impact testno current standard is supersededISBN 0 580 46270 6


AUE/4

BS ISO 7341:2005

Banking. Nostro accounts reconciliationsupersedes BS ISO 7341:2000ISBN 0 580 46209 9


IST/12

BS ISO 7867:-

Tyres and rims (metric series) for agricultural tractors and machines

BS ISO 7867-1:2005

Tyre designation, dimensions and marking, and tyre/rim coordinationsupersedes BS AU 50-1.4.5a:1996ISBN 0 580 46472 5


AUE/4

BS ISO 7981:-

Water quality. Determination of polycyclic aromatic hydrocarbons (PAH)

BS ISO 7981-1:2005

Determination of six PAH by high performance thin layer chromatography with fluorescence detection after liquid-liquid extractionno current standard is supersededISBN 0 580 46410 5


EH/3/2

BS ISO 7981-2:2005

Determination of six PAH by high-performance liquid chromatography with fluorescence detection after liquid-liquid extractionno current standard is supersededISBN 0 580 46411 3


EH/3/2

BS ISO 8600:-

Optics and photonics. Medical endoscopes and endotherapy devices

BS ISO 8600-1:2005General requirements

supersedes BS ISO 8600-1:1997ISBN 0 580 46292 7


CPW/172/5

BS ISO 8600-5:2005

Determination of optical resolution of rigid endoscopes with opticsno current standard is supersededISBN 0 580 46432 6


CPW/172/5

BS ISO 8600-6:2005Vocabulary



CPW/172/5

BS ISO 13216:-

Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems


BS ISO 13216-2:2004

Top tether anchorages and attachmentsno current standard is supersededISBN 0 580 46208 0


AUE/7

BS ISO 13899:-

Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method

BS ISO 13899-2:2005Determination of Nb Content



ISE/18

BS ISO 14420:2005

Carbonaceous products for the production of aluminium. Baked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansionno current standard is supersededISBN 0 580 46452 0


CII/24

BS ISO 14461:-

Milk and milk products. Quality control in microbiological laboratories

BS ISO 14461-2:2005

Determination of the reliability of colony counts of parallel plates and subsequent dilution stepsno current standard is supersededISBN 0 580 46093 2


AW/9

BS ISO 14674:2005

Milk and milk powder. Determination of aflatoxin M$d1 content. Clean-up by immunoaffinity chromatography and determination by thin-layer chromatographyno current standard is supersededISBN 0 580 46228 5


AW/5

BS ISO 15583:2005

Ships and marine technology. Maritime standards listno current standard is supersededISBN 0 580 46398 2


SME/32/9

BS ISO 15634:2005

Iron ores. Determination of chromium content. Flame atomic absorption spectrometric methodpartially supersedes BS 7020-16:1993ISBN 0 580 46216 1


ISE/58

BS ISO 16063:-

Methods for the calibration of vibration and shock transducers

BS ISO 16063-22:2005

Shock calibration by comparison to a reference transducersupersedes BS 6955-4:1994ISBN 0 580 46281 1


GME/21/2

BS ISO 16241:2005

Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)no current standard is supersededISBN 0 580 46143 2


PRI/88/4

BS ISO 16881:-

Cranes. Design calculation for rail wheels and associated trolley track supporting structure

BS ISO 16881-1:2005General



MHE/3/3

BS ISO 17247:2005Coal. Ultimate analysis



PTI/16

BS ISO 17356:-

Road vehicles. Open interface for embedded automotive applications

BS ISO 17356-2:2005

OSEK/VDX specifications for binding OS, COM and NMno current standard is supersededISBN 0 580 46477 6


AUE/16

BS ISO/IEC 18033:-

Information technology. Security techniques. Encryption algorithms

BS ISO/IEC 18033-1:2005General



IST/33

BS ISO 18852:2005

Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)no current standard is supersededISBN 0 580 46233 1


PRI/50

BS ISO 19109:2005

Geographic information. Rules for application schemano current standard is supersededISBN 0 580 46379 6


IST/36


BS ISO 24237:2005

Surface chemical analysis. X-ray photoelectron spectroscopy. Repeatability and constancy of intensity scaleno current standard is supersededISBN 0 580 46280 3


CII/60

IT AND INFORMATION MANAGEMENT PUBLICATIONS AND PRODUCTSBIP 0018:2005

Simplifying the implementation of MPEG CD-ROMno current standard is supersededISBN 0 580 46110 6

£35.00 members£35.00 non-membersVAT is applicable to this item.

SPECIALIST BOOKS FROM BSIBIP 2073:2005Quality patient care in hospitals



ELECTRONIC PRODUCTS

BIP 0022:2005RA2 Art of risk CD-ROM

no current standard is superseded

£977.00 members£977.00 non-membersVAT is applicable to this item.

KITS, SETS, PACKS AND SERIESKIT 146Graphical symbols kit


£149.00 members£298.00 non-membersSpecial offer. Includes BS 5499 Parts 1 to 6 and Part 11.

KIT 147Graphical symbols kit


£206.00 members£412.00 non-membersVAT is applicable to this item. Special offer. Includes BS 5499 Parts 1 to 6 and Part 11 and EP 250 (Safety signs and symbols CD-ROM).

KIT 148Surface texture standards kit


£395.00 members£790.00 non-membersSpecial offer. Includes BS EN ISO 1302, BS EN ISO 3274, BS EN ISO 4287, BS EN ISO 4288, BS EN ISO 8785, BS ISO 10135, BS EN ISO 11562, BS EN ISO 12085, BS EN ISO 13565 Parts 1 to 3, BS EN ISO 14253-1, BS EN ISO 14660-1 and BS EN ISO 81714-1.

KIT 162Structural bearings kit


£258.00 members£516.00 non-membersSpecial offer. Includes BS EN 1337 Parts 1 & 2, 4, 6 & 7, and 9 to 11.

KIT 163Concrete standards kit


£190.00 members£380.00 non-membersSpecial offer. Includes BS 8500 Parts 1 & 2, BS EN 206-1 and BIP 2001.

KIT 164Testing concrete in structures kit


£67.00 members£134.00 non-membersSpecial offer. Includes BS EN 12504 Parts 1, 2 & 4.

KIT 165

Concrete paving requirements & test methods kitno current standard is supersededISBN 0 580 33422 8

£303.00 members£606.00 non-membersSpecial offer. Includes BS 6717, BS 7263-1, BS EN 1340, BS EN 1338, BS EN 1339, BS EN 12629-2, and BS EN 13863 Parts 1 & 2.

KIT 166Concrete paving kit


£212.00 members£424.00 non-membersSpecial offer. Includes BS 7533 Parts 1 to 4, 6 to 8, 10 and 11.

KIT 167

Hot rolled products of structural steels kitno current standard is supersededISBN 0 580 33418 X

£232.00 members£464.00 non-membersSpecial offer. Includes BS EN 10025 Parts 1 to 6.

KIT 168

CE marking for insulating glass units kitno current standard is supersededISBN 0 580 33424 4

£615.95 members£806.00 non-membersSpecial offer. Includes BS EN 1279 Parts 1 to 4 and Part 6, and a manufacturer's toolkit (BIP 3001) on CD-ROM.

KIT 169Insulating glass units kit


£191.00 members£382.00 non-membersSpecial offer. Includes BS EN 1279 Parts 1 to 4 and Part 6.

AMENDMENTS TO BRITISH STANDARDSBS 750:1984

Specification for underground fire hydrants and surface box frames and coversCORRIGENDUM 1 AMD 15667Updated standard:Please order by the reference:BS 750:1984£46.00 members£92.00 non-members

FSH/17Also incorporates Amendment 1, 2 and 3.

BS 2000:-

Methods of test for petroleum and its products

of 69AMENDMENTS TO BRITISH STANDARDS

BS 2000-239:-

Determination of the extreme-pressure and anti-wear properties of fluids. Four ball method (European conditions)See BS EN ISO 20623.

BS 6312:-

Connectors for analogue telecommunication interfaces

BS 6312-2:-

Sockets for use with plugs specified in BS 6312:Part 1

BS 6312-2.2:1997

Particular requirements for fixed socket-outlets used in permanent wiring installationsAMENDMENT 1 AMD 15632Updated standard:Please order by the reference:BS 6312-2.2:1997£32.00 members£64.00 non-members

TCT/2

BS 7499:2002

Static site guarding and mobile patrol services. Code of practiceAMENDMENT 1 AMD 15926Updated standard:Please order by the reference:BS 7499:2002£46.00 members£92.00 non-members

GW/3, GW/3/-/3

BS 8418:2003

Installation and remote monitoring of detector activated CCTV systems. Code of practiceAMENDMENT 1 AMD 15833Updated standard:Please order by the reference:BS 8418:2003£32.00 members£64.00 non-members

GW/1, GW/1/10

BS EN ISO 20623:2003(BS 2000-239:2004)

Petroleum and related products. Determination of the extreme-pressure and anti-wear properties of fluids. Four ball method (European conditions)AMENDMENT 1 AMD 15634Updated standard:Please order by the reference:BS EN ISO 20623:2003£16.65 members£22.20 non-members

PTI/13Also incorporates Corrigendum 1.

BS EN 60335:-

Specification for safety of household and similar electrical appliances

BS EN 60335-2:-Particular requirements

BS EN 60335-2-29:2004Battery chargers

AMENDMENT 1 AMD 15769Updated standard:Please order by the reference:BS EN 60335-2-29:2004£32.00 members£64.00 non-members

CPL/61, CPL/61/01Also incorporates Corrigendum 1.

UPDATED BRITISH STANDARDSBS 6037:-

Code of practice for the planning, design, installation and use of permanently installed access equipment

BS 6037-1:2003Suspended access equipment

AMENDMENT 1Updated standard:Please order by the reference:BS 6037-1:2003£46.00 members£92.00 non-members

B/514, B/514/39

BS EN 26:1998

Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burnersAMENDMENT 2Updated standard:Please order by the reference:BS EN 26:1998£74.00 members£148.00 non-members

GSE/34Also incorporates Amendment 1.

SPECIAL ANNOUNCEMENTS

NEW BT/TFServices of real estate agents

The Technical Board (BT) of the European Standardisation Agency (CEN) has proposed the establishment of a Technical Board/Task Force (BT/TF) to react to an application from the Austrian National Standards Body (ON). This application sets out to develop aContact: Ray KerriganEmail: [email protected]

NONE

BS EN 1949:2002/A1

Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other vehicles

No Draft for Public Comment was issued for this standard, which was amended by CEN/TC 181. Further information may be obtained from the contact point (below).Contact: Committee Service CentreEmail: [email protected]

GSE/24

BS EN 50144:-

Safety of hand-held electric motor operated tools

of 69SPECIAL ANNOUNCEMENTS

BS EN 50144-1:1999General requirements

This standard, which was withdrawn on 1 July 2005 in line with the national foreword to the superseding publication BS EN 60745-1:2003, is now to be re-instated.

Subsequent to publication of BS EN 60745-1 in May 2003 it was realised that a number of sContact: Geraldine SaltEmail: [email protected]

CPL/61/6

prEN ISO 12625:-Tissue paper and tissue products

prEN ISO 12625-7Determination of optical properties

This document has been issued for enquiry and is being reviewed by committee PAI/11. Copies are available upon request from the committee secretary (below).Contact: Sue BardenEmail: [email protected]

PAI/11

EN 13136:2001/A1

Refrigerating systems and heat pumps. Pressure relief devices and their associated piping. Method for calculation

The European document has recently been published and will shortly be made available in the UK as an amendment to BS EN 13136:2001 .Contact: Nyomee KyawEmail: [email protected]

RHE/18

prCEN/TS 14383:-

Prevention of crime. Urban planning and design

prCEN/TS 14383-4Shops and offices

This final draft has recently been received for FV (Formal Vote) and circulated to committee B/209/10. Further information is available from the committee secretary (below).Contact: Ranjit BhambraEmail: [email protected]

B/209/10

prCEN/TR 15352

Bitumen and bituminous binders. Development of performance-related specifications

This final draft has recently been received for FV (Formal Vote) and circulated to committee B/510/19. Further information is available from the committee secretary (below).Contact: Ranjit BhambraEmail: [email protected]

B/510/19

ISO/FDIS 8262:-

Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (reference method)

ISO/FDIS 8262-3Special cases

This standard has been circulated to ISO members as a Final Draft International Standard (FDIS) by ISO/TC 34/SC 5. It incorporates minor revisions to the earlier version of the International standard. It has not been circulated as a Draft for Publlic ComContact: Committee Service CentreEmail: [email protected]

AW/5

BRITISH STANDARDS PROPOSED FOR CONFIRMATIONBS 499:-Welding terms and symbols

BS 499-2C:1999

European arc welding symbols in chart form

WEE/1

BS 500:2000Steel sleepers

RAE/2/-/1

BS 873:-

Road traffic signs and internally illuminated bollards

BS 873-1:1983Methods of test

B/509

BS 873-2:1984

Specification for miscellaneous signs

B/509

BS 873-3:1980

Specification for internally illuminated bollards

B/509

BS 873-4:1987Specification for road studs

B/509

BS 873-7:1984Specification for posts and fittings

B/509

BS 1191:-

Specification for gypsum building plasters

BS 1191-1:1973

Excluding premixed lightweight plasters

B/544

BS 1191-2:1973Premixed lightweight plasters

B/544

BS 1230:-Gypsum plasterboard

BS 1230-1:1985

Specification for plasterboard excluding materials submitted to secondary operations

B/544

BS 1306:1975

Specification for copper and copper alloy pressure piping systems

PVE/10

BS 1369:-

Steel lathing for internal plastering and external rendering

BS 1369-1:1987

Specification for expanded metal and ribbed lathing

B/544

BS 1467:1972Specification for folders and files

FW/0

BS 1560:-

Circular flanges for pipes, valves and fittings (class designated)

of 69BRITISH STANDARDS PROPOSED FOR CONFIRMATION

BS 1560-3:-

Steel, cast iron and copper alloy flanges

BS 1560-3.2:1989Specification for cast iron flanges

PSE/15

BS 2737:1956

Terminology of internal defects in castings as revealed by radiography

WEE/46

BS 3143:-Road danger lamps

BS 3143-2:1990

Specification for low-intensity battery-operated lamps

B/509

BS 3143-4:1985

Specification for high intensity battery operated beacons

B/509

BS 3262:-

Hot-applied thermoplastic road marking materials

BS 3262-3:1989

Specification for application of material to road surfaces

B/509

BS 3273:1960

Specification for distant indicating thermometers for ships' refrigerated cargo spaces

SME/32

BS 3293:1960

Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry

PSE/15

BS 3934:-

Mechanical standardization of semiconductor devices

BS 3934-10:1992

Schedule of UK national drawings giving dimensions

EPL/47

BS 4022:1970

Specification for prefabricated gypsum wallboard panels

B/544

BS 4089:1999

Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases

PSE/12

BS 4263:1967

Specification for the marking of hatchway beams

SME/32

BS 4507:1969

Specification for grease gun cartridges (composite type)

GME/24

BS 4515:-

Specification for welding of steel pipelines on land and offshore

BS 4515-2:1999Duplex stainless steel pipelines

WEE/21/7

BS 5077:1974

Specification for grease guns (hand-operated lever type) for use with cartridges complying with BS 4507

GME/24

BS 5262:1991

Code of practice for external renderings

B/544

BS 5492:1990

Code of practice for internal plastering

B/544

BS 5873:-Educational furniture

BS 5873-1:1980

Specification for functional dimensions, identification and finish of chairs and tables for educational institutions

FW/0

BS 5873-2:1991

Specification for strength and stability of chairs for educational institutions

FW/0

BS 5873-3:1985

Specification for strength and stability of tables for educational institutions

FW/0

BS 5873-4:1998

Specification for strength and stability of storage furniture for educational institutions

FW/0

BS 5873-5:1998

Specification for security of fixed secure storage furniture for educational institutions

FW/0

BS 6129:-

Code of practice for the selection and application of bellows expansion joints for use in pressure systems

BS 6129-1:1981Metallic bellows expansion joints

PSE/14

BS 6130:-

Hose and hose assemblies for asphalt and bitumen

BS 6130-1:1993

Specification for flexible metallic hose and hose assemblies

PSE/12

BS 6222:-Domestic kitchen equipment

BS 6222-3:1999

Performance requirements for durability of surface finish and adhesion of surfacing and edging materials. Specification

FW/0

BS 6325:1982

Glossary of terms relating to black tea

AW/8

BS 6452:-

Beads for internal plastering and dry lining

BS 6452-1:1984

Specification for galvanized steel beads

B/544

BS 6571:-Vehicle parking control equipment

BS 6571-1:1989

Specification for coin operated clockwork parking meters

B/509


BS 6571-2:1989

Specification for electrically powered parking meters

B/509

BS 6571-4:1989

Specification for barrier type parking control equipment

B/509

BS 6571-6:1996

Specification for pay-on-foot parking control equipment

B/509/20

BS 6571-7:1997Specification for parking discs

B/509/20

BS 6571-8:1997

Specification for pre-purchased parking vouchers

B/509/20

BS 6779:-

Highway parapets for bridges and other structures

BS 6779-1:1998

Specification for vehicle containment parapets of metal construction

B/509/1

BS 6779-2:1991

Specification for vehicle containment parapets of concrete construction

B/509

BS 7364:1990

Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards

B/544

BS 7449:1991

Specification for inclusion of glass in the construction of furniture, other than tables or trolleys, including cabinets, shelving systems and wall hung or free standing mirrors

FW/0

BS 7777:-

Flat-bottomed, vertical, cylindrical storage tanks for low temperature service

BS 7777-1:1993

Guide to the general provisions applying for design, construction, installation and operation

PVE/15

BS 7777-2:1993

Specification for the design and construction of single, double and full containment metal tanks for the storage of liquefied gas at temperatures down to -165$0DC

PVE/15

BS 7777-3:1993

Recommendations for the design and construction of prestressed and reinforced concrete tanks and tank foundations, and for the design and installation of tank insulation, tank liners and tank coatings

PVE/15

BS 7777-4:1993

Specification for the design and construction of single containment tanks for the storage of liquid oxygen, liquid nitrogen and liquid argon

PVE/15

BS 7945:1999

Non-domestic furniture. Seating. Determination of stability

FW/0

BS 7962:2000

Black materials for masking existing road markings. Specification

B/509/2

BS 8212:1995

Code of practice for dry lining and partitioning using gypsum plasterboard

B/544/3

BS 9300 C199-276:1971

Detail specification for silicon voltage-regulator diodes

EPL/47

BS 9300 C377-378:1971

Detail specifications for silicon coaxial mixer diodes

EPL/47

BS 9300 C379-388:1971

Detail specifications for silicon stud mounted, power rectifier diodes

EPL/47

BS 9300 C476:1973

Detail specification for silicon avalanche rectifier diode

EPL/47

BS 9300 C534:1971

Detail specification for silicon coaxial resistive switching diode

EPL/47

BS 9300 C582-584:1971

Detail specifications for reverse blocking triode thyristors

EPL/47

BS 9300 C599:1971

Detail specification for silicon microwave switching diode, rod mounted

EPL/47

BS 9300 C667-668:1971

Detail specification for silicon avalanche rectifier diodes

EPL/47

BS 9300 C678-721:1971

Detail specification for silicon voltage regulator diodes

EPL/47

BS 9300 C762:1971

Detail specification for mixer diodes for use at X-band frequencies

EPL/47

BS 9300 C771-772:1971

Detail specification for coaxial mixer diodes

EPL/47

BS 9300 C776-777:1971

Detail specification for germanium coaxial mixer diodes

EPL/47

BS 9300 C778:1971

Detail specification for a matched pair of germanium coaxial mixer diodes

EPL/47

BS 9300 C780-831:1971


EPL/47


BS 9300 C841-849:1971


EPL/47

BS 9301 N002:1971

Detail specification for general purpose silicon signal diodes. 150 mA, 150 V, hermetically sealed, glass encapsulation. General application category Q

EPL/47

BS 9305 N001:1972

Detail specification for silicon voltage regulator diodes. 1.5 W, 3.3 to 33 V (5%), hermetically sealed. General application category Q

EPL/47

BS 9305 N041:1972

Detail specification for silicon voltage regulator diodes. 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation. General application category Q

EPL/47

BS 9305 N042:1972

Detail specification for silicon voltage regulator diodes. 1.5 W, 6.8 to 200 V (5%), hermetically sealed. General application category C

EPL/47

BS 9305 N044:1974

Detail specification for silicon voltage regulator diodes. 1.0 W, 3.3 to 33 V (5%), hermetically sealed. Full assessment level

EPL/47

BS 9364 N007 and N009:1978

Detail specification for low power silicon n-p-n switching transistors. 20 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level

EPL/47

BS 9364 N008 and N010:1978

Detail specification for low power silicon n-p-n switching transistors. 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level

EPL/47

BS 9364 N011:1978

Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level

EPL/47

BS 9364 N012:1978

Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level

EPL/47

BS 9364 N013:1979

Detail specification for low power silicon p-n-p switching transistors. 25 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level

EPL/47

BS 9364 N016:1979

Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level

EPL/47

BS 9364 N017:1979

Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level

EPL/47

BS 9430:1978

Rules for the preparation of detail specifications for integrated circuits of assessed quality: voltage regulators. Full assessment level

EPL/47

BS 9490:1975

Rules for the preparation of detail specifications for digital integrated circuits of assessed quality. Full assessment level

EPL/47

BS 9493:1981

Rules for the preparation of detail specifications for integrated circuits of assessed quality which perform mixed digital and/or analogue functions

EPL/47

BS ISO 4708:2000

Composition cork. Gasket material. Test methods

PRI/81

BS ISO 4709:2000

Composition cork. Gasket material. Classification system, requirements, sampling, packing and marking

PRI/81

BS ISO 4710:2000

Cork. Cylindrical stoppers for sparkling wines and gasified wines. Characteristics

PRI/81

BS ISO 4714:2000

Composition cork. Specifications, sampling, packaging and marking

PRI/81

BS ISO 7322:2000Composition cork. Test methods

PRI/81

PD 6430/1:1970

Extract (appendices A and B) from PD 6430: 'The adoption of the metric system in the marine industry: report, basic programme and guide. Units of the SI, their application and use in the marine industry'

SME/32

PD 6460:1971

Collected amendments to the CV7000 specifications for semiconductors adopted as British Standards (9300C series)

EPL/47

PD 7777:2000

Alternative steel selection and its effect on design and testing of tanks to BS 7777

PVE/15

PD ES 59008:-

Data requirements for semiconductor die


PD ES 59008-1:2000General requirements

EPL/47

PD ES 59008-2:1999Vocabulary

EPL/47

PD ES 59008-3:1999

Mechanical, material and connectivity requirements

EPL/47

PD ES 59008-4:-

Specific requirements and recommendations

PD ES 59008-4-3:2000Thermal

EPL/47

PD ES 59008-4-4:2000Electrical simulation

EPL/47

PD ES 59008-6:-

Exchange data formats and data dictionary

PD ES 59008-6-1:1999Data exchange. DDX file format

EPL/47

BS MA 6:1970

Specification for internal doors and frames

SME/32

BS MA 7:1983

Specification for manholes with bolted covers

SME/32

BS MA 9:1970

Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes

SME/32

BS MA 10:1971Specification for oval eyeplates

SME/32

BS MA 11:1971Specification for horncleats

SME/32

BS MA 12:-

Specification for welded steel bollards

BS MA 12-1:1983Vertical type

SME/32

BS MA 12-2:1983Cruciform type

SME/32

BS MA 13:1972

Recommendations for the co-ordination of dimensions in shipbuilding: glossary of terms

SME/32

BS MA 14:1972

Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for components and assemblies

SME/32

BS MA 17:1972

Specification for derrick boom clamp

SME/32

BS MA 18:1973

Specification for salt water piping systems in ships

SME/32

BS MA 19:1973

Specification for panama-type fairleads

SME/32

BS MA 20:1973

Specification for presentation of ships' cargo gear particulars

SME/32

BS MA 21:1973

Specification for deck-end roller fairleads

SME/32

BS MA 22:1973

Specification for cast roller fairleads

SME/32

BS MA 23:1973

Specification for multi-angle roller fairleads

SME/32

BS MA 25:1973Specification for ships' windows

SME/32

BS MA 26:1973Specification for suction strainers

SME/32

BS MA 27:1974

Specification for sight-flow indicators for tank overflow systems

SME/32

BS MA 30:1973

Glossary of terms and graphical symbols for ships' deck machinery

SME/32

BS MA 31:1973

Specification for ships' deck machinery. Cargo winches

SME/32

BS MA 33:1973

Specification for ships' deck machinery. Warping winches

SME/32

BS MA 34:1973

Specification for ships' deck machinery. Capstans

SME/32

BS MA 35:1975

Specification for ships' deck machinery. Windlasses

SME/32

BS MA 36:1974

Specification for ships' deck machinery. Topping winches

SME/32

BS MA 37:1973

Specification for external doors (wood) for ships

SME/32

BS MA 39:-Specification for ships' ladders

BS MA 39-1:1973Ladders, steel vertical

SME/32

BS MA 39-2:1973Ladders, steel sloping

SME/32

BS MA 39-3:1973Ladders, steel dog-step

SME/32

BS MA 40:-

Specification for marine guardrails, stanchions, etc


BS MA 40-1:1975

Guardrails for merchant ships (excluding passenger ships)

SME/32

BS MA 40-2:1975

Gates and portable guardrail sections for merchant ships (excluding passenger ships)

SME/32

BS MA 40-3:1975Storm rails (exterior)

SME/32

BS MA 42:1975

Specification for ships' awnings and supports

SME/32

BS MA 44:1974

Recommendations for the co-ordination of dimensions in shipbuilding: principles of dimensional co-ordination

SME/32

BS MA 45:1974

Recommendations for the co-ordination of dimensions in shipbuilding: controlling dimensions

SME/32

BS MA 46:1973

Specification for cast iron mudboxes

SME/32

BS MA 49:1986

Summary and application of carbon steel tubes for marine pipework systems

SME/32

BS MA 52:1974

Specification for ships' deck machinery. Accommodation ladder winches

SME/32

BS MA 53:1975

Specification for ships' deck machinery. Towing winches for deep sea use

SME/32

BS MA 55:1975

Specification for ships' deck machinery. Lifeboat winches

SME/32

BS MA 56:1974

Specification for ships' deck machinery. Anchor cable stoppers

SME/32

BS MA 59:1974Specification for sea tubes

SME/32

BS MA 60:1986

Summary and application of copper and copper alloy tubes for ships' pipework systems

SME/32

BS MA 61:1974

Specification for bilge drain and suction hats

SME/32

BS MA 62:1974

Specification for weed grids for sea inlets

SME/32

BS MA 69:1976Specification. Ventilator heads

SME/32

BS MA 70:-

Specification for dimensions of anchor chain cables

BS MA 70-1:1975Stud-link anchor chain cables

SME/32

BS MA 71:1977

Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating spaces for internal subdivision

SME/32

BS MA 72:1976

Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating spaces for furniture

SME/32

BS MA 73:1976

Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for fixtures, fittings and equipment

SME/32

BS MA 74:-

Tapers and other outboard details of propeller shafts

BS MA 74-2:1981

Specification for shafts of diameter greater than 160 mm up to 1000 mm

SME/32

BS MA 75:-

Specification for bulkhead pieces and tank pads

BS MA 75-1:1985

Bulkhead pieces of fabricated steel or copper alloy and steel pad pieces

SME/32

BS MA 75-2:1978

Bulkhead pieces of ductile iron (spheroidal graphite iron)

SME/32

BS MA 77:1976

Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for services

SME/32

BS MA 78:1978

Specification for aluminium shore gangways

SME/32

BS MA 79:1978

Specification for jib cranes: ship mounted type

SME/32

BS MA 93:1981

Code of practice for structural safety of deck machinery installation

SME/32

BS MA 94:1981

Specification for thermal insulation for marine piping systems

SME/32

BRITISH STANDARDS REVIEWED AND CONFIRMEDBS 61:1969

Specification for threads for light gauge copper tubes and fittings

NFE/34

BS 90:1975

Specification for direct-acting electrical recording instruments and their accessories

PEL/85

of 69BRITISH STANDARDS REVIEWED AND CONFIRMED

BS 411:1969

Specification for circular saws for woodworking and their attachment

MTE/20

BS 448:-

Dimensions of electronic tubes and valves

BS 448-2:1981

Specification for dimensions of United Kingdom electronic tubes

EPL/39

BS 459:1988

Specification for matchboarded wooden door leaves for external use

B/538

BS 787:-

Specification for mining type flameproof gate-end boxes

BS 787-1:1969

Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V)

MRE/3

BS 787-2:1968

Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts)

MRE/3

BS 787-3:1971

Gate-end boxes with lighting transformers

MRE/3

BS 787-4:1972

Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V)

MRE/3

BS 853:-

Specification for vessels for use in heating systems

BS 853-2:1996

Tubular heat exchangers and storage vessels for building and industrial services

RHE/12

BS 1545:1990Specification for liquid toilet soap

CII/34

BS 1552:1995

Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar

GSE/22

BS 1728:-

Methods for the analysis of aluminium and aluminium alloys

BS 1728-1:1951Determination of copper

NFE/35

BS 1728-5:1953

Determination of copper (absorptiometric method)

NFE/35

BS 1728-6:1955

Determination of iron (volumetric: titanous chloride method)

NFE/35

BS 1728-8:1957

Determination of iron (absorptiometric 1:10-phenanthroline method)

NFE/35

BS 1728-9:1957

Determination of manganese (volumetric: arsenite/nitrite method)

NFE/35

BS 1728-10:1957

Determination of manganese (absorptiometric method)

NFE/35

BS 1728-11:1960

Determination of silicon (perchloric acid method)

NFE/35

BS 1728-12:1961

Determination of silicon (absorptiometric molybdenum blue method)

NFE/35

BS 1728-14:1965

Determination of nickel (gravimetric method)

NFE/35

BS 1728-15:1966

Determination of nickel (photometric method)

NFE/35

BS 1728-16:1968

Determination of chromium (photometric method)

NFE/35

BS 1728-17:1968

Determination of chromium (volumetric method)

NFE/35

BS 1728-18:1970

Determination of zinc (ion-exchange-volumetric EDTA or polarographic method)

NFE/35

BS 1728-19:1971

Determination of magnesium (atomic absorption method)

NFE/35

BS 1728-20:1971

Determination of lead (atomic absorption method)

NFE/35

BS 1728-21:1973Zinc (atomic absorption method)

NFE/35

BS 1728-22:1972

Determination of magnesium (volumetric CDTA method)

NFE/35

BS 1728-23:1976

Copper (atomic absorption method)

NFE/35

BS 1728-24:1976Nickel (atomic absorption method)

NFE/35

BS 1911:1990Specification for hard soap

CII/34

BS 1912:1990Specification for soap flakes

CII/34

BS 1913:1990Specification for soft soap

CII/34

BS 1914:1990Specification for toilet soap

CII/34

BS 1919:-Hacksaw blades


BS 1919-1:1993

Specification for hand and machine hacksaw blades

MTE/20

BS 1919-2:1995

Specification for cutting performance

MTE/20

BS 2011:-Environmental testing

BS 2011-2.2:-Guidance

BS 2011-2.2Kd:1984

Test Kd. Guidance on test Kd: hydrogen sulphide test for contacts and connections

GEL/104

BS 2011-2.2Z/AFc and Z/BFc:1986

Tests Z/AFc and Z/BFc. Guidance on combined temperature (cold and dry heat) and vibration (sinusoidal) tests

GEL/50

BS 2049:1985

Specification for paraffin lighting appliances for domestic use

CW/31

BS 2857:1976

Specification for nickel-iron transformer and choke laminations

EPL/51

BS 3101:1986

Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines

MRE/3

BS 3138:1992

Glossary of terms used in management services

MS/1

BS 3300:1985

Specification for paraffin unflued space heating and cooking appliances for domestic use

CW/31

BS 3338:-

Methods for the sampling and analysis of tin and tin alloys

BS 3338-2:1961

Method for the determination of tin in ingot tin (aluminium reduction method)

NFE/27

BS 3338-3:1961

Method for the determination of antimony in ingot tin (photometric method)

NFE/27

BS 3338-4:1961

Method for the determination of copper in ingot tin and tin-lead solders (photometric method)

NFE/27

BS 3338-5:1961

Method for the determination of lead in ingot tin and tin-antimony solders (photometric method)

NFE/27

BS 3338-6:1961

Method for the determination of copper in high purity ingot tin (photometric method)

NFE/27

BS 3338-7:1961

Method for the determination of silver in solders (volumetric: ammonium thiocyanate method)

NFE/27

BS 3338-8:1961

Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)

NFE/27

BS 3338-9:1965

Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method)

NFE/27

BS 3338-10:1961

Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)

NFE/27

BS 3338-11:1961

Method for the determination of tin in solders (nickel coil reduction method)

NFE/27

BS 3338-13:1965

Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)

NFE/27

BS 3338-14:1965

Method for the sampling of white metal bearing alloy ingots

NFE/27

BS 3338-15:1965

Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)

NFE/27

BS 3338-16:1965

Method for the determination of tin in white metal bearing alloys (nickel coil reduction method)

NFE/27

BS 3338-17:1965

Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)

NFE/27

BS 3338-18:1966

Method for the determination of aluminium in solders and white metal bearing alloys (photometric method)

NFE/27

BS 3338-19:1966

Method for the determination of zinc in solders and white metal bearing alloys (photometric method)

NFE/27

BS 3338-20:1970

Method for the determination of nickel in capping metal (photometric method)

NFE/27

BS 3338-21:1983

Determination of high cadmium content of soft solders

NFE/27

BS 3673:-

Specification for spring retaining rings


BS 3673-2:1965Carbon steel E clips

FME/18

BS 3673-3:1968Carbon steel C clips

FME/18

BS 3673-4:1977Carbon steel circlips: metric series

FME/18

BS 3693:1992

Recommendations for design of scales and indexes on analogue indicating instruments

PEL/85

BS 3762:-Analysis of formulated detergents

BS 3762-3:-Quantitative test methods

BS 3762-3.12:1985

Method for determination of ammonia content

CII/34

BS 3762-3.14:1985

Method for determination of carbonate content

CII/34

BS 3762-3.15:1985

Method for estimation of carboxymethylcellulose content

CII/34

BS 3762-3.16:1985

Method for determination of chloride content

CII/34

BS 3877:1991

Specification for metal cutting bandsaw blades

MTE/20

BS 3905:1995

Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines

MRE/3

BS 3907:-

Methods for the analysis of magnesium and magnesium alloys

BS 3907-1:1965

Determination of aluminium in magnesium alloys (gravimetric method)

NFE/35

BS 3907-2:1966

Determination of iron in magnesium and magnesium alloys (photometric - 1:10-phenanthroline method)

NFE/35

BS 3907-3:1966

Determination of copper in magnesium and magnesium alloys (photometric method)

NFE/35

BS 3907-4:1966

Determination of manganese in magnesium and magnesium alloys (photometric-periodate method)

NFE/35

BS 3907-5:1966

Determination of manganese in magnesium and magnesium alloys (photometric-periodate method) (low contents)

NFE/35

BS 3907-6:1969

Determination of zirconium in magnesium and magnesium alloys (photometric method)

NFE/35

BS 3907-7:1969

Determination of nickel in magnesium alloys (photometric method)

NFE/35

BS 3907-8:1970

Determination of total rare earths in magnesium alloys (gravimetric method)

NFE/35

BS 3907-9:1969

Determination of zinc in magnesium alloys (ion-exchange-volumetric EDTA method)

NFE/35

BS 3907-10:1969

Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and/or silver (photometric method)

NFE/35

BS 3907-11:1970

Determination of silicon in magnesium and magnesium alloys (photometric method)

NFE/35

BS 3907-12:1971

Determination of aluminium in magnesium and magnesium alloys (photometric method)

NFE/35

BS 3907-13:1972

Determination of tin in magnesium and magnesium alloys (photometric method)

NFE/35

BS 3907-15:1976

Determination of lead in magnesium and magnesium alloys (atomic absorption method)

NFE/35

BS 4023:1975

Specification for flexible cellular PVC sheeting

PRI/71

BS 4078:-Powder actuated fixing systems

BS 4078-1:1987Code of practice for safe use

MTE/21

BS 4078-2:1989Specification for tools

MTE/21

BS 4105:1990

Specification for liquid carbon dioxide, industrial

CII/19

BS 4319:-

Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices)

BS 4319-1:1968

Essential conditions for measuring equivalent input and output admittances

EPL/39

BS 4393:1991

Specification for solderable tin or tin-lead coated wires for component terminations

NFE/27


BS 4405:1990Specification for liquid soap

CII/34

BS 4411:1969

Specification for woodcutting bandsaw blades

MTE/20

BS 4443:-

Methods of test for flexible cellular materials

BS 4443-4:1989

Method 10. Determination of solvent swelling

PRI/24

BS 4462:1969

Guide for the preparation of technical sales literature for measuring instruments and process control equipment

CPI/704

BS 4478:1969

Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers

EPL/39

BS 4553:-

Specification for 600/1000 V single-phase split concentric electric cables

BS 4553-1:1998Cables having PVC insulation

GEL/20/17

BS 4553-2:1998

Cables having thermosetting insulation

GEL/20/17

BS 4553-3:1998

Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire

GEL/20/17

BS 4577:1970

Specification for materials for resistance welding electrodes and ancillary equipment

NFE/34

BS 4727:-

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics

BS 4727-1:-

Terms common to power, telecommunications and electronics

BS 4727-1:Group 01:1983Fundamental terminology

GEL/1

BS 4727-1:Group 07:1991

Magnetic materials and components

GEL/1

BS 4727-1:Group 08:1992

Piezoelectric devices for frequency control and selection

GEL/1

BS 4727-2:-

Terms particular to power engineering

BS 4727-2:Group 08:1994Electric cables

GEL/1

BS 4727-2:Group 13:1991

Electrical apparatus for explosive atmospheres

GEL/1

BS 4727-2:Group 14:1991Power capacitors

GEL/1

BS 4727-2:Group 15:1991Overhead lines

GEL/1

BS 4727-2:Group 16:1991Instrument transformers

GEL/1

BS 4727-3:-

Terms particular to telecommunications and electronics

BS 4727-3:Group 08:1995Acoustics and electroacoustics

GEL/1

BS 4789:1972

Specification for ceramic components for use in envelopes for electronic tubes

EPL/39

BS 5067:1985

Specification for flameproof transformers for use in mines

MRE/3

BS 5125:1990

Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines

MRE/3

BS 5126:-

Mining type flameproof supply and control units for use on systems up to 1100 V

BS 5126-1:1993

Specification for direct-on-line motor starters

MRE/3

BS 5126-2:1993

Specification for circuit breaker units

MRE/3

BS 5126-3:1993

Specification for air-cooled lighting transformer units

MRE/3

BS 5126-4:1993

Specification for air-cooled transformers to power drilling machines

MRE/3

BS 5164:1975

Specification for indirect-acting electrical indicating and recording instruments and their accessories

PEL/85

BS 5226:1991

Code of practice for equipment and procedures for the cleaning and disinfecting of milking machine installations

AW/17

BS 5305:1984

Code of practice for cleaning and disinfecting of plant and equipment used in the dairying industry

AW/17


BS 5347:1976

Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment

EPL/51

BS 5754:1987

Specification for electrical analogue and state signals for use in coal mines

MRE/3

BS 5923:-

Methods for chemical analysis of rubber

BS 5923-2:1980

EDTA titrimetric method for determination of zinc content of rubber products

PRI/23

BS 6043:-

Methods of sampling and test for carbonaceous materials used in aluminium manufacture

BS 6043-1:-Electrode pitch

BS 6043-1.10:2000

Determination of volatile matter content

CII/24

BS 6043-1.11:2000

Determination of the atomic C/H ratio of the quinoline-insoluble material

CII/24

BS 6043-1.12:1994

Determination of mesophase content

CII/24

BS 6043-1.13:2000Determination of sulfur content

CII/24

BS 6043-2:-Electrode coke

BS 6043-2.4:2000

Analysis by X-ray fluorescence spectroscopy

CII/24

BS 6043-2.9:2000

Determination of particle size distribution

CII/24

BS 6043-2.10:1996

Determination of electrical resistivity of calcined coke granules

CII/24

BS 6043-2.11:1995

Determination of volatile matter content

CII/24

BS 6043-2.12:1994

Determination of particle size distribution of fine coke

CII/24

BS 6043-2.13:1996

Determination of tapped bulk density of green and calcined coke

CII/24

BS 6043-2-18:2001

Determination of the total sulfur by the Eschka method

CII/24

BS 6043-2.20:-Carboxy reactivity of calcined coke

BS 6043-2.20.1:2001

Determination of the reactivity by a loss in mass method

CII/24

BS 6043-2.21:-Air reactivity of calcined coke

BS 6043-2.21.1:2001

Determination of the reactivity by determination of ignition temperature

CII/24

BS 6043-3:-Electrodes

BS 6043-3.1:-Sampling

BS 6043-3.1.1:1999Sampling of cathodes

CII/24

BS 6043-3.1.2:1999Sampling of anodes

CII/24

BS 6043-3.3:2000

Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method

CII/24

BS 6043-3.4:2000

Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes using a hydrostatic method

CII/24

BS 6043-3.5:-Determination of flexural strength

BS 6043-3.5.1:2000Three point method

CII/24

BS 6043-3.6:2000

Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature

CII/24

BS 6043-3.8:-

Carboxy reactivity of prebaked anodes

BS 6043-3.8.1:2001


CII/24

BS 6043-3.9:-

Chemical reactivity to air of prebaked anodes

BS 6043-3.9.1:2002


CII/24

BS 6043-4:-Cold ramming pastes

BS 6043-4.1:2000Methods of sampling

CII/24

BS 6047:-

Flame supervision devices for domestic, commercial and catering gas appliances

BS 6047-1:1981

Specification for heat sensitive type

GSE/22


BS 6068:-Water quality

BS 6068-4:-Microbiological methods

BS 6068-4.8:-

Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia). Method by enrichment in a liquid mediumSee BS EN 26461-1.

BS 6068-4.13:-

Detection and enumeration of bacteriophages. Enumeration of somatic coliphagesSee BS EN ISO 10705-2.

BS 6068-5:-Biological methods

BS 6068-5.28:2000

Determination of long term toxicity of substances to Daphnia magna Straus (Cladocera, Crustacea)

EH/3/5

BS 6181:1981

Method of test for air permeability of joints in building

B/555

BS 6182:-

Intrinsically safe power supplies for use in coal mines

BS 6182-1:1994

Specification for d.c. power supplies

MRE/3

BS 6182-2:1982

Specification for a.c. power supplies

MRE/3

BS 6271:1982

Specification for miniature hacksaw blades

MTE/20

BS 6346:1997

Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V

GEL/20/17

BS 6353:1983

Specification for underground loudspeaker communication systems in coal mines

MRE/3

BS 6360:1991

Specification for conductors in insulated cables and cords

GEL/20/17

BS 6387:1994

Specification for performance requirements for cables required to maintain circuit integrity under fire conditions

GEL/20/18

BS 6469:-

Insulating and sheathing materials of electric cables

BS 6469-99:-

Test methods used in the United Kingdom but not specified in BS EN 60811 or other parts of BS 6469

BS 6469-99.2:1992Electrical tests

GEL/20/17

BS 6485:1999

PVC-covered conductors for overhead power lines

GEL/20/16

BS 6500:2000

Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments

GEL/20/17

BS 6556:-

Low speed digital signals for use in coal mines

BS 6556-1:1985Specification for optical coupling

MRE/3

BS 6556-2:1985

Specification for transformer coupling

MRE/3

BS 6556-3:1985

Specification for message protocols

MRE/3

BS 6600:-

Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment

BS 6600-1:1987

Specification for the outline dimensions of transformers and inductors using YEI-1 laminations

EPL/51

BS 6600-10:1985

Specification for the outline dimensions of transformers and inductors using the Q range of C-cores

EPL/51

BS 6704:1996

Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines

MRE/3

BS 6705:1987

Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines

MRE/3

BS 6708:1998

Flexible cables for use at mines and quarries

MRE/3

BS 6709:1986

Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp

MRE/3

BS 6724:1997

Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire

GEL/20/17

BS 6907:-

Electrical installations for open-cast mines and quarries

BS 6907-1:1988Glossary

MRE/3

BS 6907-2:1988

General recommendations for protection against direct contact and electric shock

MRE/3


BS 6907-3:1988

Recommendations for equipment and ancillaries

MRE/3

BS 6907-4:1988

Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems

MRE/3

BS 6907-5:1988Recommendations for operation

MRE/3

BS 6910:-

Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c.

BS 6910-1:1988Specification for materials

GEL/20/11

BS 6931:1988

Glossary of terms for copper and copper alloys

NFE/34

BS 6940:-

Total access communication system (T.A.C.S)

BS 6940-1:1989

Specification for performance requirements for mobile stations

EPL/102

BS 6940-2:1989

Specification for performance and tests of the signalling system of mobile stations

EPL/102

BS 6954:-Tolerances for building

BS 6954-1:1988

Recommendations for basic principles for evaluation and specification

B/555

BS 6954-2:1988

Recommendations for statistical basis for predicting fit between components having a normal distribution of sizes

B/555

BS 7019:1989

Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines

MRE/3

BS 7164:-

Chemical tests for raw and vulcanized rubber

BS 7164-11:-Butadiene rubber

BS 7164-11.2:1993

Method for determination of unsaturation

PRI/23

BS 7194:1990

Specification for direct-current and low-frequency electronic measuring instruments with a digital display

PEL/85

BS 7202:1989

Specification for non-incendive low voltage control/interlock and low voltage earth fault monitoring circuits for use in mines

MRE/3

BS 7211:1998

Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire

GEL/20/17

BS 7383:1990

Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines

MRE/3

BS 7461:1991

Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control

GSE/22

BS 7527:-

Classification of environmental conditions

BS 7527-2:-

Environmental conditions appearing in nature

BS 7527-2.1:1991Temperature and humidity

GEL/104

BS 7527-2.2:1991Precipitation and wind

GEL/104

BS 7527-2.3:1991Air pressure

GEL/104

BS 7527-2.4:1991Solar radiation and temperature

GEL/104

BS 7527-2.5:1991Dust, sand, salt mist

GEL/104

BS 7527-2.6:1991Earthquake vibration and shock

GEL/104

BS 7527-2.7:1991Fauna and flora

GEL/104

BS 7562:-

Planning, design and installation of irrigation schemes

BS 7562-1:1992Glossary of terms

AGE/30

BS 7562-2:1992Guide for acquisition of site data

AGE/30

BS 7562-4:1992Guide to water resources

AGE/30

BS 7562-5:1993Guide for irrigation equipment

AGE/30

BS 7562-6:1992

Guide for feasibility and implementation procedures

AGE/30


BS 7592:1992

Methods for sampling for Legionella<I/> organisms in water and related materials

EH/3

BS 7629:-

Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire

BS 7629-1:1997Multicore cables

GEL/20/17

BS 7629-2:1997Multipair cables

GEL/20/17

BS 7655:-

Specification for insulating and sheathing materials for cables

BS 7655-1:-Elastomeric insulating compounds

BS 7655-1.1:2000Harmonized types

GEL/20/17

BS 7655-1.2:1997General 90$0DC application

GEL/20/17

BS 7655-1.3:2000XLPE

GEL/20/17

BS 7655-1.4:2000Oil resisting types

GEL/20/17

BS 7655-1.5:2000Flame retardant composites

GEL/20/17

BS 7655-1.6:2000Coil end lead types

GEL/20/17

BS 7655-2:-Elastomeric sheathing compounds


GEL/20/17

BS 7655-2.3:2000General application

GEL/20/17

BS 7655-2.4:2000Welding cable covering

GEL/20/17

BS 7655-2.6:2000

Sheathing compounds for ships' wiring and offshore applications

GEL/20/17

BS 7655-3:-PVC insulating compounds


GEL/20/17

BS 7655-3.2:2000Hard grade types

GEL/20/17

BS 7655-4:-PVC sheathing compounds


GEL/20/17

BS 7655-4.2:2000General application

GEL/20/17

BS 7655-4.3:2000Special applications. RF cables

GEL/20/17

BS 7655-5:-

Cross-linked insulating compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire

BS 7655-5.1:1997Harmonized cross-linked types

GEL/20/17

BS 7655-6:-

Thermoplastic sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire

BS 7655-6.1:1997

General application thermoplastic types

GEL/20/17

BS 7655-8:-

Cross-linked sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire


GEL/20/17

BS 7655-10:-

Polyethylene sheathing compounds

BS 7655-10.1:2000

Thermoplastic medium density polyethylene (MDPE) sheathing compound

GEL/20/17

BS 7655-11:-

Miscellaneous insulating compounds

BS 7655-11.1:1997

Harmonized cross-linked PVC types

GEL/20/17

BS 7655-12:-

Miscellaneous sheathing compounds

BS 7655-12.1:2000

Harmonized thermoplastic polyurethane sheathing compound

GEL/20/17

BS 7769:-

Electric cables. Calculation of the current rating

BS 7769-1:-

Current rating equations (100% load factor) and calculation of losses

BS 7769-1.1:1997General

GEL/20/16

BS 7769-1.2:1994

Sheath eddy current loss factors for two circuits in flat formation

GEL/20/16

BS 7769-2:-Thermal resistance


BS 7769-2.2:1997

A method for calculating reduction factors for groups of cables in free air, protected from solar radiation

GEL/20/16

BS 7769-3:-Sections on operating conditions

BS 7769-3.1:1997

Reference operating conditions and selection of cable type

GEL/20/16

BS 7771:1994

Code of practice for pasteurization of milk on farms and in small dairies

AW/17

BS 7846:2000

Electric cables. 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire

GEL/20/17

BS 7852:1997

Code of practice for design of canoes and kayaks

GME/33

BS 7870:-

LV and MV polymeric insulated cables for use by distribution and generation utilities

BS 7870-1:1996General

GEL/20/16

BS 7870-2:1999Methods of test

GEL/20/16

BS 7870-4:-

Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV

BS 7870-4.10:1999Single-core 11 kV and 33 kV cables

GEL/20/16

BS 7870-4.11:1999

Single-core 33 kV lead sheathed cables

GEL/20/16

BS 7870-4.20:1999Three-core 11 kV cables

GEL/20/16

BS 7870-5:1999

Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution

GEL/20/16

BS 7870-6:-

Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations

BS 7870-6.1:1999

PVC insulated and PVC sheathed cables

GEL/20/16

BS 7870-6.2:1999

XLPE or HEPR insulated and PVC sheathed cables

GEL/20/16

BS 7870-6.3:1999

Cables with thermosetting insulation and non-halogenated sheath

GEL/20/16

BS 7874:1998

Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines

PRI/70

BS 7889:1997

Electric cables. Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V

GEL/20/17

BS 7924:1999

Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp

MRE/3

BS 9721:1985

Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval

EPL/51

BS 9727:1985

Sectional specification for power transformers of assessed quality for use in electronic equipment for capability approval

EPL/51

BS 9733:1985

Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval

EPL/51

BS 9741:1986

Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval

EPL/51

BS 9751:1979

Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full assessment level

EPL/51

BS 9753:1986

Sectional specification for variable r.f. type inductors of assessed quality for use in electronic equipment for capability approval

EPL/51

BS EN ISO 683:-

Heat-treated steels, alloy steels and free-cutting steels

BS EN ISO 683-17:1999Ball and roller bearing steels

ISE/31

BS EN 1622:1998

Water analysis. Determination of the threshold odour number (TON) and threshold flavour number (TFN)

EPL/47

BS EN 1976:1998

Copper and copper alloys. Cast unwrought copper products

GEL/20/17

BS EN 1977:1998

Copper and copper alloys. Copper drawing stock (wire rod)

GEL/20/17


BS EN 1978:1998

Copper and copper alloys. Copper cathodes

GEL/20/17

BS EN ISO 4957:2000Tool steels

ISE/31

BS EN ISO 6509:1995

Corrosion of metals and alloys. Determination of dezincification resistance of brass

ISE/NFE/8

BS EN ISO 7384:1995

Corrosion tests in artificial atmospheres. General requirements

ISE/NFE/8

BS EN ISO 7441:1995

Corrosion of metals and alloys. Determination of bimetallic corrosion in outdoor exposure corrosion tests

ISE/NFE/8

BS EN ISO 7539:-

Corrosion of metals and alloys. Stress corrosion testing

BS EN ISO 7539-1:1995

General guidance on testing procedures

ISE/NFE/8

BS EN ISO 7539-2:1995

Preparation and use of bent-beam specimens

ISE/NFE/8

BS EN ISO 7539-3:1995

Preparation and use of U-bend specimens

ISE/NFE/8

BS EN ISO 7539-4:1995

Preparation and use of uniaxially loaded tension specimens

ISE/NFE/8

BS EN ISO 7539-5:1995

Method for the preparation and use of C-ring specimens

ISE/NFE/8

BS EN ISO 7899:-

Water quality. Detection and enumeration of intestinal enterococci in surface and waste water

BS EN ISO 7899-1:1999

Miniaturized method (Most probable number) for surface and waste water

EH/3/4

BS EN ISO 7899-2:2000Membrane filtration method

EH/3/4

BS EN ISO 8044:2000

Corrosion of metals and alloys. Basic terms and definitions

ISE/NFE/8

BS EN ISO 8565:1995

Metals and alloys. Atmospheric corrosion testing. General requirements for field tests

ISE/NFE/8

BS EN ISO 9308:-

Water quality. Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water

BS EN ISO 9308-1:2000Membrane filtration method

EH/3/4

BS EN ISO 9308-3:1999

Miniaturized method (most probable number) for the detection and enumeration of E. coli in surface and waste water

EH/3/4

BS EN ISO 9400:1996

Nickel-based alloys. Determination of resistance to intergranular corrosion

ISE/NFE/8

BS EN 10048:1997

Hot rolled narrow steel strip. Tolerances on dimensions and shape

ISE/10

BS EN ISO 10062:1995

Corrosion test in artificial atmospheres at very low concentrations of polluting gas(es)

ISE/NFE/8

BS EN 10083:-Quenched and tempered steels

BS EN 10083-1:1991

Technical delivery conditions for special steels

ISE/31

BS EN 10083-2:1991

Technical delivery conditions for unalloyed quality steels

ISE/31

BS EN 10083-3:1996

Technical delivery conditions for boron steels

ISE/31

BS EN 10084:1998

Case hardening steels. Technical delivery conditions

ISE/31

BS EN 10087:1999

Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods

ISE/31

BS EN 10089:2002

Hot rolled steels for quenched and tempered springs. Technical delivery conditions

ISE/31

BS EN 10132:-

Cold rolled narrow steel strip for heat treatment. Technical delivery conditions

BS EN 10132-1:2000General

ISE/31

BS EN 10132-2:2000Case hardening steels

ISE/31

BS EN 10132-3:2000

Steels for quenching and tempering

ISE/31

BS EN 10132-4:2000

Spring steels and other applications

ISE/31

BS EN 10139:1998

Cold rolled uncoated mild steel narrow strip for cold forming. Technical delivery conditions

ISE/10

BS EN 10149:-

Specification for hot-rolled flat products made of high yield strength steels for cold forming


BS EN 10149-1:1996General delivery conditions

ISE/10

BS EN 10149-2:1996

Delivery conditions for thermomechanically rolled steels

ISE/10

BS EN 10149-3:1996

Delivery conditions for normalized or normalized rolled steels

ISE/10

BS EN 10209:1996

Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions

ISE/10

BS EN 10221:1996

Specification for surface quality classes for hot-rolled bars and rods. Technical delivery conditions

ISE/31

BS EN 10243:-

Steel die forgings. Tolerances on dimensions

BS EN 10243-1:1999Drop and vertical press forgings

ISE/31

BS EN 10243-2:1999

Upset forgings made on horizontal forging machines

ISE/31

BS EN 10250:-

Open steel die forgings for general engineering purposes


ISE/31

BS EN 10250-2:2000Non-alloy quality and special steels

ISE/31

BS EN 10250-3:2000Alloy special steels

ISE/31

BS EN 10250-4:2000Stainless steels

ISE/31

BS EN 10254:1999

Steel closed die forgings. General technical delivery conditions

ISE/31

BS EN 10267:1998

Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures

ISE/31

BS EN 10277:-

Bright steel products. Technical delivery conditions

BS EN 10277-1:1999General

ISE/31

BS EN 10277-2:1999

Steels for general engineering purposes

ISE/31

BS EN 10277-3:1999Free cutting steels

ISE/31

BS EN 10277-4:1999Case-hardening steels

ISE/31

BS EN 10277-5:1999

Steels for quenching and tempering

ISE/31

BS EN 10278:1999

Dimensions and tolerances of bright steel products

ISE/31

BS EN 10292:2000

Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming. Technical delivery conditions

ISE/10

BS EN ISO 10705:-

Water quality. Detection and enumeration of bacteriophages

BS EN ISO 10705-2:2001(BS 6068-4.13:2000)Enumeration of somatic coliphages

EH/3/4

BS EN ISO 11130:1999

Corrosion of metals and alloys. Alternate immersion test in salt solution

ISE/NFE/8

BS EN ISO 11306:1998

Corrosion of metals and alloys. Guidelines for exposing and evaluating metals and alloys in surface sea water

ISE/NFE/8

BS EN 12094:-

Fixed firefighting systems. Components for gas extinguishing systems

BS EN 12094-8:1998

Requirements and test methods for flexible connectors for CO$d2 systems

GEL/104

BS EN 12500:2000

Protection of metallic materials against corrosion. Corrosion likelihood in atmospheric environment. Classification, determination and estimation of corrosivity of atmospheric environments

ISE/NFE/8

BS EN 24506:1993

Specification for hardmetals. Compression test

ISE/65

BS EN 26461:-

Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia)

BS EN 26461-1:1993(BS 6068-4.8:1993)

Method by enrichment in a liquid medium

EH/3

BS EN 50109:-

Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications

BS EN 50109-1:1996General requirements and tests

EPL/46/2



BS EN 50109-2-1:1996

Radio frequency connectors and concentric contacts. Open throat tools with fixed dies, sizes A to E, V and W

EPL/46/2

BS EN 50109-2-2:1996

Radio frequency connectors and concentric contacts. Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W

EPL/46/2

BS EN 50109-2-3:1996Contacts of electrical connectors

EPL/46/2

BS EN 50109-2-4:1996

Centre contacts of RF connectors, series SMZ

EPL/46/2

BS EN 50109-2-5:1996

Termination of twin-ax cable for databus applications

EPL/46/2

BS EN 50117:-

Coaxial cables used in cabled distribution networks

BS EN 50117-3:1996

Sectional specification for outdoor drop cables

EPL/46/1

BS EN 50117-4:1996

Sectional specification for distribution and trunk cables

EPL/46/1

BS EN 50117-5:1997

Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz

EPL/46/1

BS EN 50117-6:1997

Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz

EPL/46/1

BS EN 50262:1999

Cable glands for electrical installations

GEL/20/11/1

BS EN 60068:-Environmental testing

BS EN 60068-1:1995General and guidance

GEL/104

BS EN 60068-2:-Test methods

BS EN 60068-2-1:1993Tests A. Cold

GEL/104

BS EN 60068-2-2:1993Tests B. Dry heat

GEL/104

BS EN 60068-2-6:1996Test Fc. Vibration (sinusoidal)

GEL/104

BS EN 60068-2-7:1993

Test Ga and guidance. Acceleration, steady state

GEL/104

BS EN 60068-2-11:1999Test KA. Salt mist

GEL/104

BS EN 60068-2-13:1999Test M. Low air pressure

GEL/104

BS EN 60068-2-14:2000Test N. Change of temperature

GEL/104

BS EN 60068-2-17:1995Test Q. Sealing

GEL/104

BS EN 60068-2-18:2001Tests R and guidance. Water

GEL/104

BS EN 60068-2-27:1993Test Ea and guidance. Shock

GEL/104

BS EN 60068-2-29:1993Test Eb and guidance. Bump

GEL/104

BS EN 60068-2-30:1999

Test Db and guidance. Damp heat, cyclic (12 + 12 hour cycle)

GEL/104

BS EN 60068-2-31:1993

Test Ec. Drop and topple, primarily for equipment-type specimens

GEL/104

BS EN 60068-2-32:1993Test Ed. Free fall

GEL/104

BS EN 60068-2-33:2000

Guidance on change of temperature tests

GEL/104

BS EN 60068-2-38:1999

Test Z/AD. Composite temperature/humidity cyclic test

GEL/104

BS EN 60068-2-39:1999

Test Z/AMD. Combined sequential cold, low air pressure and damp heat test

GEL/104

BS EN 60068-2-40:2000

Test Z/AM. Combined cold/low air pressure tests

GEL/104

BS EN 60068-2-41:2000

Test Z/BM. Combined dry heat/low air pressure tests

GEL/104

BS EN 60068-2-44:1995Guidance on test T. Soldering

GEL/104

BS EN 60068-2-45:1993

Test XA and guidance. Immersion in cleaning solvents

GEL/104

BS EN 60068-2-47:2000

Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests

GEL/104

BS EN 60068-2-48:2000

Guidance on the application of the tests of IEC 60068 to simulate the effects of storage

GEL/104

BS EN 60068-2-52:1996

Test Kb. Salt mist cyclic (sodium chloride solution)

GEL/104


BS EN 60068-2-55:1993Test Ee and guidance. Bounce

GEL/104

BS EN 60068-2-60:1996

Test Ke. Flowing mixed gas corrosion test

GEL/104

BS EN 60068-2-61:1994Test Z/ABDM. Climatic sequence

GEL/104

BS EN 60068-2-65:1995

Test Fg. Vibration, acoustically induced

GEL/104

BS EN 60068-2-66:1995

Test Cx. Damp heat, steady state (unsaturated pressurized vapour)

GEL/104

BS EN 60068-2-67:1996

Test Cy. Damp heat, steady state, accelerated test primarily intended for components

GEL/104

BS EN 60068-2-69:1996

Test Te. Solderability testing of electronic components for surface mount technology by the wetting balance method

GEL/104

BS EN 60068-2-70:1996

Test Xb. Abrasion of markings and letterings caused by rubbing of fingers and hands

GEL/104

BS EN 60068-2-75:1997Test Eh. Hammer tests

GEL/104

BS EN 60068-3:-Guidance

BS EN 60068-3-3:1993

Environmental testing. Miscellaneous. Guide to seismic test methods for equipment

GEL/104

BS EN 60154:-Flanges for waveguides


EPL/46/2

BS EN 60154-2:1997

Relevant specifications for flanges for ordinary rectangular waveguides

EPL/46/2

BS EN 60169:-Radio-frequency connectors

BS EN 60169-23:1994

Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0 ,1378 in)

EPL/46/2

BS EN 60169-24:1994

Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)

EPL/46/2

BS EN 60169-25:1994

Two-pole screw ($9L-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN)

EPL/46/2

BS EN 60719:1993

Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V

GEL/20/17

BS EN 60811:-

Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds

BS EN 60811-3:-

Pressure test at high temperature. Tests for resistance to cracking

BS EN 60811-3-1:1995

Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds

GEL/20/17

BS EN 60811-3-2:1995

Insulating and sheathing materials of electric cables. Common test methods

GEL/20/17

BS EN 60966:-

Radio frequency and coaxial cable assemblies

BS EN 60966-1:1999

Generic specification. General requirements and test methods

EPL/46/1

BS EN 61169:-Radio-frequency connectors

BS EN 61169-1:1996

Generic specification. General requirements and measuring methods

EPL/46/2

BS EN 61169-31:2000

RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling. Characteristic impedance 50 ohms (type 1,0)

EPL/46/2

BS EN 61169-32:2000

RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling. Characteristic impedance 50 ohms (type 1,85)

EPL/46/2

BS EN 61580:-

Methods of measurement for waveguides

BS EN 61580-1:1997

Decoupling and rotation of the plane of polarization

EPL/46/2

BS EN 61580-2:1997Level of intermodulation products

EPL/46/2

BS EN 61580-7:1997

Graphical method for the determination of waveguide performance

EPL/46/2

BS EN 61580-8:1997

Waveguide power holding capability

EPL/46/2

BS EN 61580-9:1997

Reflection coefficient at rectangular waveguide interfaces

EPL/46/2


BS EN 61726:2000

Cable assemblies, cables, connectors and passive microwave components. Screening attenuation measurement by the reverberation chamber method

EPL/46

BS EN 62037:2000

RF connectors, connector cable assemblies and cables. Intermodulation level measurement

EPL/46

BS EN 122150:1996

Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series EIA Flange

EPL/46

BS EN 122160:1996

Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SSMA

EPL/46

BS EN 122180:1996

Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series SSMC

EPL/46/2

BS EN 122190:1996

Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series 7-16

EPL/46

BS EN 122340:2002

Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series MMCX

EPL/46/2

DD ENV 302:-

Adhesives for load-bearing timber structures. Test methods

DD ENV 302-5:2002

Determination of the conventional assembly time

PRI/52

DD ENV 13999:-

Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application

DD ENV 13999-2:2002

Determination of volatile organic compounds

PRI/52

DD ENV 13999-3:2002Determination of volatile aldehydes

PRI/52

DD ENV 13999-4:2002

Determination of volatile diisocyanates

PRI/52

BS ISO 3534:-Statistics. Vocabulary and symbols

BS ISO 3534-3:1999Design of experiments

SS/1

BS ISO 4507:2000

Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test

ISE/65

BS ISO/IEC 6523:-

Information technology. Structure for the identification of organizations and organization parts

BS ISO/IEC 6523-1:1998

Identification of organization identification schemes

IST/40

BS ISO/IEC 6523-2:1998

Registration of organization identification schemes

IST/40

BS ISO 7539:-

Corrosion of metals and alloys. Stress corrosion testing

BS ISO 7539-8:2000

Preparation and use of specimens to evaluate weldments

ISE/NFE/8

BS ISO 9403:2000

Crude petroleum. Transfer accountability. Guidelines for cargo inspection

PTI/12

BS ISO 10270:1995

Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors

ISE/NFE/8

BS ISO 10405:2000

Petroleum and natural gas industries. Care and use of casing and tubing

PSE/17

BS ISO 11463:1995

Corrosion of metals and alloys. Evaluation of pitting corrosion

ISE/NFE/8

BS ISO 11782:-

Corrosion of metal and alloys. Corrosion fatigue testing

BS ISO 11782-1:1998Cycles to failure testing

ISE/NFE/8

BS ISO 11782-2:1998

Crack propagation testing using precracked specimens

ISE/NFE/8

BS ISO 11846:1995

Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys

ISE/NFE/8

BS ISO/IEC 13238:-

Information technology. Data management

BS ISO/IEC 13238-3:1998IRDS export/import facility

IST/40

BS ISO 14976:1998

Surface chemical analysis. Data transfer format

CII/60


BS ISO 15324:2000

Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test

ISE/NFE/8

BS IEC 60050:-

International electrotechnical vocabulary

BS IEC 60050-101:1998Mathematics

GEL/1

BS IEC 60050-121:1998Electromagnetism

GEL/1

BS IEC 60050-195:1998

Earthing and protection against electric shock

GEL/1

BS IEC 60050-351:1998Automatic control

GEL/1

BS IEC 60050-411:1996Rotating machines

GEL/1

BS IEC 60050-442:1998Electrical accessories

GEL/1

BS IEC 60050-551:1998Power electronics

GEL/1

BS IEC 60050-651:1999Live working

GEL/1

BS IEC 60050-705:1995Radio wave propagation

GEL/1

BS IEC 60050-715:1996

Telecommunication networks, teletraffic and operation

GEL/1

BS IEC 60050-821:1998

Signalling and security apparatus for railways

GEL/1

DD IEC/PAS 62338:2002

Screened balanced cables. Coupling attenuation measurement, triaxial method

EPL/46/1

PD 6484:1979

Commentary on corrosion at bimetallic contacts and its alleviation

ISE/NFE/8

PD 6634:-Vehicle restraint systems

PD 6634-1:1999Fundamentals. Database

B/509/1

PD 6634-2:1999

Fundamentals of highway restraint systems

B/509/1

PD 6634-3:1999

Development of vehicle highway barriers in the United Kingdom

B/509/1

PD 6634-4:1999

Development of bridge parapets in the United Kingdom

B/509/1

PD 6634-5:1999

Development of barrier transitions and terminals

B/509/1

PD 6634-6:1999

Crashworthy roadside features. Impact attenuators

B/509/1

BS G 257:-

Design of electromagnetic hazard protection of civil aircraft

BS G 257-1:1998Guide to theory and threats

ACE/66

BS G 257-2:1998Guide to protection

ACE/66

BS 2M 47:1990

Specification for retreading of cross ply tyres for aircraft

ACE/59

BS QC 221100:1997

Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with screw coupling. Characteristic impedance 50 ohms (type SMA)

EPL/46/2

BS QC 221200:1997

Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC)

EPL/46/2

BS QC 221300:1997

Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling. Characteristic impedance 50 ohms (type SMB)

EPL/46/2

BS QC 221400:1997

Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with screw coupling. Characteristic impedance 50 ohms (type SMC)

EPL/46/2

BS QC 222000:1996

Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling. Characteristic impedance 50 ohms (type TNC)

EPL/46/2

BS QC 222100:1997

Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (type N)

EPL/46/2


BS QC 222400:1997

Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 5,6 mm (0,22 in). Characteristic impedance 75 ohms (type 1,6/5,6). Characteristic impedance 50 ohms (type 1,8/5,6) with similar mating dimensions

EPL/46/2

BS AU 2a:1970

Specification for dimensions of 3$9H - 4$9H in diameter fifth wheel king pin for use with extra heavy duty semi-trailers

AUE/13

BS AU 3:1970

Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers

AUE/13

BS AU 25:1964

Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle

AUE/13

BS AU 26:1964

Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle

AUE/13

BS AU 27:1964

Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle

AUE/13

BS AU 28:1964

Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle

AUE/13

BS AU 29:1964

Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle

AUE/13

BS AU 30b:1970

Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to 14$9L tons laden weight

AUE/13

BS AU 146b:1970

Specification for standard automatic roller-type coupling for semi-trailers not exceeding 7$9D tons laden weight

AUE/13

BS AU 181:1982

Specification for interface dimensions for demountable vehicle body systems

AUE/13

BS AU 200:-

Spray reducing devices for heavy goods vehicles

BS AU 200-1a:1984

Specification for design of containment devices

AUE/13

BS AU 200-2a:1984

Specification for performance of suppression material and devices, and air/water separating material and devices

AUE/13

BS AU 217:-

Maximum road speed limiters for motor vehicles

BS AU 217-1a:1987

Specification for installed requirements

AUE/13

BS AU 217-2:1989

Specification for system and component requirements

AUE/13

BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCEBS 2050:1978

Specification for electrical resistance of conducting and antistatic products made from flexible polymeric material

PRI/22/-/5This standard has been proposed for obsolescence as it is not widely used.

BS 7669:-Vehicle restraint systems

BS 7669-3:1994

Guide to the installation, inspection and repair of safety fences

B/509This standard has been proposed for obsolescence as it is rarely used.

BS 7818:1995

Specification for pedestrian restraint systems in metal

B/509/1This standard has been proposed for obsolescence as it is rarely used.

BS 9450:1975

Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures). Generic data and methods of test

EPL/47This standard has been proposed for confirmation of obsolescence for a further period.

BRITISH STANDARDS DECLARED OBSOLESCENTBS 4370:-

Methods of test for rigid cellular materials

BS 4370-1:1988Methods 1 to 5

PRI/24This standard has been declared obsolescent as the methods it contains are no longer being used by UK industry.

BS 4570:1985

Specification for fusion welding of steel castings

WEE/-/1This standard has been declared obsolescent since although it is still used by some areas of UK industry, there is insufficient support for the preparation of an up-to-date revision.

BS 4579:-

Specification for performance of mechanical and compression joints in electric cable and wire connectors

of 69BRITISH STANDARDS DECLARED OBSOLESCENT

BS 4579-2:1973

Compression joints in nickel, iron and plated copper conductors

GEL/20/11This standard has been declared obsolescent as the committee believe it is no longer widely used for new designs. It should therefore be retained only for existing equipment, and will no longer require maintenance.

BS ISO/IEC 9579:2000

Information technology. Remote database access for SQL with security enhancement

IST/40This standard has been declared obsolescent since the international version is not being maintained by ISO/IEC and there is no evidence of its continued use in the UK.

BS ISO/IEC ISP 12073:2000

Information technology. International standardized profile FD16 directory data definitions. EDI use of the directory

IST/40This standard has been declared obsolescent since the international version is not being maintained by ISO/IEC and there is no evidence of its continued use in the UK.

BRITISH STANDARDS PROPOSED FOR WITHDRAWALBS 2011:-Environmental testing

BS 2011-5:-Guide to drafting of test methods

BS 2011-5.1:1991General principles

GEL/104This standard has been proposed for withdrawal because it is no longer in general use

BS 3648:1963Specification for cycle rear lamps

GME/25This standard, which was superseded by BS 6102-3:1986 but has remained current owing to its citation in legislation, has been proposed for full withdrawal as it is no longer used by UK industry

BS 6579:-

Safety fences and barriers for highways

BS 6579-1:1988

Specification for components for tensioned corrugated beam safety fence on Z posts

B/509This standard has been proposed for withdrawal as it is no longer used in the UK

BS 6579-3:1988

Specification for components for tensioned rectangular hollow section beam (100 mm x 100 mm) safety fence


BS 6579-4:1990

Specification for components for tensioned rectangular hollow section beam (200 mm x 100 mm) safety fence


BS 6579-5:1986

Specification for open box beam safety fence (single height)


BS 6579-6:1988

Specification for components for open box beam safety fence (double height)


BS 6579-7:1989

Specification for components for untensioned corrugated beam safety fence


BS 6579-8:1987

Specification for concrete safety barriers


BS 7368:1990

Specification for babies' elastomeric feeding bottle teats

CW/42This standard has been proposed for withdrawal in line with the publication of superseding documents BS EN 14350:2004 Parts 1 & 2

BS 7480:1992Specification for security seals

GW/2This standard has been proposed for withdrawal as it is no longer relevant. It will be superseded by an ISO standard, which is currently available as a Draft for Development, DD ISO/PAS 17712:2003

BS 7606:1992

Specification for social alarm system apparatus for connection to public switched telephone networks

GW/1This standard has been proposed for withdrawal as it is no longer used in the UK

DD IEC PAS 62255:-

Multi-pair cables used in high bit rate digital access telecommunication networks

DD IEC PAS 62255-1:2001Outdoor cables

EPL/46/1This standard has been proposed for withdrawal as it has been superseded by IEC 62255-1:2003, which has not been adopted by BSI as it conflicts with current European standards

PD 6522:1988

Terms relevant to the feather industry for fillings for bedding, upholstery and other domestic articles

TCI/66This standard has been proposed for full withdrawal owing to its complete supersession by BS EN 1885:1998

of 69BRITISH STANDARDS PROPOSED FOR WITHDRAWAL

BRITISH STANDARDS WITHDRAWNBS 1608:1990

Specification for electrically driven refrigerant condensing units

RHE/4This standard has been withdrawn as it is no longer current with respect to modern methods and consequently condensing unit manufacturers no longer refer to it

BS 3970:-

Sterilizing and disinfecting equipment for medical products

BS 3970-4:1990

Specification for transportable steam sterilizers for unwrapped instruments and utensils

LBI/35Superseded by BS EN 13060:2004

BS 4533:-Luminaires

BS 4533-102:-Particular requirements

BS 4533-102.22:1990

Specification for luminaires for emergency lighting

CPL/34Superseded by BS EN 60598-2-22:1999

BS 4897:-Trace metal contents of pulps

BS 4897-4:1983

Method for determination of manganese content by sodium periodate photometric and flame atomic absorption spectrometric methods

PAI/11Superseded by BS ISO 1830:2005

BS 5224:1995Specification for masonry cement

B/516/10Superseded by BS EN 413-1:2004

BS 5473:1977

Specification for spinal and abdominal fabric supports

CH/168Superseded by BS 8432:2005

BS 5766:-

Methods for analysis of animal feeding stuffs

BS 5766-4:1998

Determination of nitrogen content and calculation of crude protein content

AW/10Superseded by BS EN ISO 5983-1:2005

BS 6323:-

Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes

BS 6323-6:1982

Specific requirements for cold finished electric resistance welded (including induction welded) steel tubes

ISE/8Superseded by BS EN 10305 Parts 2, 3 & 6

BS 6955:-

Calibration of vibration and shock pick-ups

BS 6955-4:1994

Method for secondary shock calibration

GME/21Superseded by BS ISO 16063-22:2005

BS 7164:-

Chemical tests for raw and vulcanized rubber

BS 7164-6:-

Methods for determination of volatile matter

BS 7164-6.1:1994Raw rubber

PRI/23Superseded by BS ISO 248:2005

BS 7426:-

Specification for high-voltage alternating current switch-fuse combinationsSee BS EN 60420

BS 7866:1996

Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers

PEL/36Superseded by BS EN 50386:2002

BS 7877:1999

Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers

PEL/36/1Superseded by BS EN 50387:2002

BS EN 12625:-Tissue paper and tissue products

BS EN 12625-3:1999

Determination of thickness, bulking thickness and apparent bulk density

PAI/10Superseded by BS EN ISO 12625-3:2005

BS EN 12625-4:1999

Determination of tensile strength, stretch at break and tensile energy absorption

PAI/10Superseded by BS EN ISO 12625-4:2005

BS EN 22063:1994

Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys

STI/40Superseded by BS EN ISO 2063:2005

BS EN 50091:-

Specification for uninterruptible power systems (UPS)

BS EN 50091-1-1:1997

General and safety requirements for UPS used in operator access areas

PEL/22Superseded by BS EN 62040-1-1:2003

BS EN 50091-1-2:1999

General and safety requirements for UPS used in restricted access locations

PEL/22Superseded by BS EN 62040-1-2:2003

BS EN 60335:-

Specification for safety of household and similar electrical appliances


of 69BRITISH STANDARDS WITHDRAWN

BS EN 60335-2-3:1995Electric irons

CPL/61/30Superseded by BS EN 60335-2-3:2002

BS EN 60335-2-4:1995Spin extractors


BS EN 60335-2-25:1997Microwave ovens

CPL/61/2Superseded by BS EN 60335-2-25:2002

BS EN 60335-2-70:1996Milking machines


BS EN 60335-2-87:1999

Electric animal-stunning equipment

CPL/61, CPL/61/8Superseded by BS EN 60335-2-87:2002

BS EN 60335-2-90:1998Commercial microwave ovens

CPL/61, CPL/61/2Superseded by BS EN 60335-2-90:2002

BS EN 60420:1993(BS 7426:1991)

Specification for high-voltage alternating current switch-fuse combinations

PEL/17/1Superseded by BS EN 62271-105:2003

BS EN 61000:-

Electromagnetic compatibility (EMC)

BS EN 61000-4-7:1993

General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

GEL/210/8Superseded by BS EN 61000-4-7:2002

BS ISO/IEC 10728:1993

Information technology. Information resource dictionary system (IRDS) services interface

IST/40This standard has been withdrawn since it has been superseded by ISO/IEC 10728:1993 which is approved with any amendments for use in the UK

BS ISO/IEC 11179:-

Information technology. Specification and standardization of data elements

BS ISO/IEC 11179-3:1994Basic attributes of data elements

IST/40This standard has been withdrawn in line with the withdrawal of the international standard on which it was based

BS IEC 50:-


BS IEC 50(481):1996Primary cells and batteries

GEL/1This standard has been withdrawn as it has been superseded by IEC 60050-482, which has not been adopted by BSI as it is more readily available via the IEC on-line database

BS AU 50:-Tyres and wheels

BS AU 50-1:-Tyres

BS AU 50-1.4:-

Agricultural tractor and machine tyres

BS AU 50-1.4.5a:1996

Specification for designations, dimensions, marking and tyre/rim coordination for metric series tyres

AUE/4Superseded by BS ISO 7867-1:2005

NEW WORK STARTED

BS 4163 (Revision)

Health and safety for design and technology in schools and similar establishments code of practicewill supersede BS 4163:2000

GME/27

BS 5839:-

Fire detection and alarm systems for buildings

BS 5839-8 (Revision)

Code of practice for the design, installation, commissioning and servicing of voice alarm systemswill supersede BS 5839-8:1998

FSH/12/1

BS 5892:-Railway rolling stock materials


Specification for axles for traction and trailing stockwill supersede BS 5892-1:1992

RAE/3/-/1

BS 5892-5:1997/Amendment 1

Specification for steel bars for retaining rings for tired wheels

RAE/3/-/1

BS 5950:-

Structural use of steelwork in building


Code of practice for design. Rolled and welded sections

B/525/31

BS 6297 (Revision)

Design and installation of small sewage treatment works and cesspools code of practicewill supersede BS 6297:1983

B/505/40

BS 6739 (Revision)

Code of practice for instrumentation in process control systems. Installation design and practicewill supersede BS 6739:1986

GEL/65

BS 6782:-Binders for paints


Determination of monomeric and varnishes diisocyanates in polyisocyanate resins

STI/3

BS 7273:-

Code of practice for the operation of fire protection measures

of 69NEW WORK STARTED


Electrical actuation of gaseous total flooding extinguishing systemswill supersede BS 7273-1:2000

FSH/12/4

BS 7533:-

Pavements constructed with clay, natural stone, or concrete pavers


Code of practice for the construction of pavements of natural stone setts and cobbles, and rigid construction with concrete block paving

B/507


Guide for the structural design of trafficked pavements constructed of natural stone setts

B/507

BS 7941:-

Methods for measuring the skid resistance of pavement surfaces


Side-way force coefficient routine investigation machinewill supersede BS 7941-1:1999

B/510/5

BS 8476

Code of practice for the safe use of concrete pumps

B/513/8

BS 8477

Customer satisfaction customer service guidelines

SVS/8

BS 11000:-Relationship management

BS 11000-1General

SVS/8

BS XXXXSpecification for diving gases

PH/4/7BS XXXX

Code of practice for airtight ceilings and the control of air movements in roofs with airtight ceilings

B/542/1

BS XXXX

A code of practice for the design of limited access stairs

B/208

BS EN 33 (Revision)

Pedestal W.C. pans with close-coupled flushing cistern. Connecting dimensionswill supersede BS EN 33:2003

B/503

BS EN 40:-Lighting columns

BS EN 40-1:1992/Amendment 1Definitions and terms

B/509/50

BS EN 287:-

Qualification test of welders. Fusion welding

BS EN 287-1:2004/Amendment 2Steels

WEE/36

BS EN 343:2003/Amendment 1

Protective clothing. Garments for protection against rain

PH/3

BS EN 415:-Safety of packaging machines

BS EN 415-9

Noise measurement methods for packaging machines, packaging lines and auxiliary equipment. Grade 2 and 3 accuracy

MCE/3/3

BS EN 754:-

Aluminium and aluminium alloys. Cold drawn rod/bar and tube

BS EN 754-1 (Revision)

Technical conditions for inspection and deliverywill supersede BS EN 754-1:1997

NFE/35

BS EN 754-2 (Revision)Mechanical properties

will supersede BS EN 754-2:1997NFE/35


Round bars, tolerances on dimensions and formwill supersede BS EN 754-3:1996

NFE/35


Square bars, tolerances on dimensions and formwill supersede BS EN 754-4:1996

NFE/35


Rectangular bars, tolerances on dimensions and formwill supersede BS EN 754-5:1996

NFE/35


Hexagonal bars, tolerances on dimensions and formwill supersede BS EN 754-6:1996

NFE/35


Seamless tubes, tolerances on dimensions and formwill supersede BS EN 754-7:1998

NFE/35


Porthole tubes, tolerances on dimensions and formwill supersede BS EN 754-8:1998

NFE/35

BS EN 755:-

Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles



NFE/35

BS EN 755-2 (Revision)Mechanical properties

will supersede BS EN 755-2:1997NFE/35


Round bars, tolerances on dimensions and formswill supersede BS EN 755-3:1996

NFE/35


Square bars, tolerances on dimensions and formwill supersede BS EN 755-4:1996

NFE/35


Rectangular bars, tolerances on dimensions and formwill supersede BS EN 755-5:1996

NFE/35



Hexagonal bars, tolerances on dimensions and formwill supersede BS EN 755-6:1996

NFE/35


Seamless tubes, tolerances on dimensions and formwill supersede BS EN 755-7:1998

NFE/35


Porthole tubes, tolerances on dimensions and formwill supersede BS EN 755-8:1998

NFE/35


Tolerances on dimensions and formwill supersede BS EN 755-9:2001

NFE/35

BS EN 846:-

Methods of test for ancillary components for masonry


Determination of load capacity and load-deflection characteristics of joist hangerswill supersede BS EN 846-8:2000

B/519

BS EN 943:-

Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles

BS EN 943-1:2002/Amendment C

Performance requirements for ventilated and non-ventilated 'gas-tight' (type 1) and 'non-gas-tight' (type 2) chemical protective suits

PH/3/8

BS EN ISO/CD 945:-

Designation of microstructure of cast irons

BS EN ISO/CD 945-1

Graphite classification by visual analysis

ISE/35

BS EN 970 (Revision)

Non-destructive examination of fusion welds. Visual examinationwill supersede BS EN 970:1997

WEE/46

BS EN 1071:-

Advanced technical ceramics. Methods of test for ceramic coatings


Determination of the abrasion resistance of coatings by a micro-abrasion wear testwill supersede DD ENV 1071-6:2002

RPI/13

BS EN 1459:1999/Amendment 1

Safety of industrial trucks. Self-propelled variable reach trucks

MHE/7

BS EN 1634:-

Fire resistance tests for door and shutter assemblies

BS EN 1634-1:2000/Amendment 1Fire doors and shutters

FSH/22


Non-destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levelswill supersede BS EN 1712:1997

WEE/46


Non-destructive examination of welds. Ultrasonic examination of welded jointswill supersede BS EN 1714:1998

WEE/46


Masonry and masonry products. methods for determining design thermal valueswill supersede BS EN 1745:2002

B/519

BS EN ISO 3673:-Plastics. Epoxy resins

BS EN ISO 3673-2 (Revision)

Preparation of test specimens and determination of propertieswill supersede BS EN ISO 3673-2:2000

PRI/42

BS EN ISO 5850:-Pulp. Estimation of dirt and shives

BS EN ISO 5850-1

Inspection of laboratory sheets by transmitted light

PAI/11

BS EN ISO 6141

Gas analysis. Requirements for certificates for calibration gases and gas mixtureswill supersede BS 4559-4:2000

PTI/15

BS EN ISO 6143

Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtureswill supersede BS ISO 6143:2001

PTI/15

BS EN ISO 6144

Gas analysis. Preparation of calibration gas mixtures. Static volumetric methodwill supersede BS ISO 6144:2003

PTI/15

BS EN ISO 8662:-

Hand-held portable power tools. Measurement of vibrations at the handle

BS EN ISO 8662-4 (Revision)Angle and vertical grinders

will supersede BS EN ISO 8662-4:1995

MCE/8

BS EN ISO 11040:-Prefilled syringes

BS EN ISO 11040-4Glass barrels for injectables

CH/212

BS EN ISO 11058 (Revision)

Geotextiles and geotextile related products. Determination of water permeability characteristics normal to the plane, without loadwill supersede BS EN ISO 11058:1999

B/553

BS EN 12020:-

Aluminium and aluminium alloys. Extruded precision profiles in EN-AW-6060 and EN-AW-6063



NFE/35



Tolerances on dimensions and formwill supersede BS EN 12020-2:2001

NFE/35


Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impactwill supersede BS EN 12691:2001

B/546


Geotextiles and geotextile related products. Determination of the characteristic opening sizewill supersede BS EN ISO 12956:1999

B/553


Geotextiles and geotextile related products. Determination of water flow capacity in their planewill supersede BS EN ISO 12958:1999

B/553

BS EN 13126:-

Building hardware. Hardware for windows and balcony doors. Requirements and test methods

BS EN 13126-15Rollers

B/538/4

BS EN 13126-16Fittings for lift and slide systems

B/538/4

BS EN 13126-17Fittings for tilt and slide systems

B/538/4


Advanced technical ceramics. Ceramic composites mechanical properties at ambient temperature. Evaluation of the resistance to crack propagation by notch sensitivity testingwill supersede DD ENV 13234:2000

RPI/13


Advanced technical ceramics. Ceramic composites mechanical properties at high temperature under inert atmosphere. Determination of creep behaviourwill supersede DD ENV 13235:2000

RPI/13

BS EN 13381:-

Test methods for determining the contribution to the fire resistance of structural members

BS EN 13381-1Horizontal protective membranes

FSH/22

BS EN 13501:-

Fire classification of construction products and building elements


Classification using test data from reaction to fire testswill supersede BS EN 13501-1:2002

FSH/21


Classification using data from fire resistance tests, excluding ventilation serviceswill supersede BS EN 13501-2:2003

FSH/22


Safety and control devices for gas burners and gas burning appliances. General requirementswill supersede BS EN 13611:2000

GSE/22

BS EN 13618:-Water supply. Hose assemblies

BS EN 13618-1

Flexible hose assemblies with or without braiding

B/503

BS EN 13618-2

Semi rigid assemblies with or without braiding

B/503


Petroleum products and other liquids. Determination of flash point. Abel closed cup methodwill supersede BS EN ISO 13736:1998

PTI/13

BS EN 14459

Methods of risk analysis for the use of electronics in systems and control functions for gas burners and gas burning appliances

GSE/22

BS EN ISO 14896:2001/Corrigendum 1Plastics. Polyurethane raw materials. Determination of isocyanate content

PRI/42

BS EN ISO 15011:-

Health and safety in welding and allied processes. Laboratory method for sampling fume and gases

BS EN ISO 15011-3 (Revision)

Determination of ozone emission ratewill supersede BS EN ISO 15011-3:2002

WEE/40

BS EN 15287:-

Chimneys. Design, installation and commissioning of chimneys

BS EN 15287-1

Chimneys for non-roomsealed heating appliances

B/506

BS EN 15318

Design and application of gypsum blocks

B/544/1

BS EN 15320

Identification card systems. Surface transport applications. Interoperable public transport application (IOPTA)

IST/17

BS EN ISO 17249:2004/Amendment 1Safety footwear with resistance to chain saw cutting

PH/1

BS EN ISO 20344:2004/Amendment 1Personal protective equipment. Test methods for footwear

PH/1


BS EN ISO 20345:2004/Amendment 1Personal protective equipment. Safety footwear

PH/1

BS EN ISO 20346:2004/Amendment 1Personal protective equipment. Protective footwear

PH/1

BS EN ISO 20347:2004/Amendment 1Personal protective equipment. Occupational footwear

PH/1

BS EN ISO 23747

Lung ventilators and related equipment. Peak expiratory flow meterswill supersede BS EN 13826:2003

CH/121/3

BS EN 60050:-


BS EN 60050-411 (Edition 3)Rotating machinery

will supersede BS IEC 60050(411):1996

PEL/2

BS EN 60598:-Luminaires

BS EN 60598-2-20:1998/Corrigendum 4Particular requirements for lighting chains

CPL/34/4

BS EN 61338:-

Waveguide type dielectric resonators

BS EN 61338-1-4 (Edition 1)

General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at millimeter-wave frequency

EPL/49

BS EN 61788:-Superconductivity


Electronic characteristic measurements. Surface resistance of superconductors at microwave frequencieswill supersede BS EN 61788-7:2002

L/-/90

BS EN 62271:-

High-voltage switchgear and controlgear

BS EN 62271-104

Alternating current switches for rated voltages of 52kv and above

PEL/17/1

BS EN 62368

Audio/video, information and communication technology equipment. Safety requirements

EPL/108

BS EN 62442:-

Energy efficiency of electrical lighting equipment. Ballasts forfluorescent lamps

BS EN 62442-1

Method of measurement to determine energy consumption of ballast-lamp circuits

CPL/34/3

BS EN 00256124:-Measurement of axle loads

BS EN 00256124-1

Interoperable 'in-service' rail vehicles

RAE/1

BS EN 261339

Packaging. Flexible aluminium tubes test method to determine the porosity of the internal coating

PKW/0

BS EN 261340

Packaging. Flexible laminate tubes test methods to determine the strength of the head welding

PKW/0

BS EN 261341

Packaging. Flexible laminate and plastic tubes test method to determine the print adhesion

PKW/0

BS EN 261342

Packaging. Flexible laminate tubes test methods to determine the strength of the side seam

PKW/0

BS EN 261343

Packaging. Flexible aluminium tubes determination of the adhesion of the internal and external protective lacquering

PKW/0

BS ISO 3937:-Cutters arbors with tenon drive

BS ISO 3937-27/24 taper. Dimensions

MTE/5

BS ISO 3937-3

Hollow taper interface with flange contact surface. Dimensions

MTE/5

BS ISO 4252

Agricultural tractors. Operator's workplace, access and exit. Dimensions

AGE/6

BS ISO 4411

Hydraulic fluid power. Valves. Determination of pressure differential / flow characteristics

MCE/18

BS ISO 4625:-

Binders for paints and varnishes. Determination of softening point

BS ISO 4625-1:2004/Amendment 1Ring-and-ball method

STI/3

BS ISO 4625-2:2004/Amendment 1Cup-and-ball method

STI/3

BS ISO 5667:-Water quality. Sampling

BS ISO 5667-15

Guidance on the preservation and handling of sludge and sediment sampleswill supersede BS 6068-6.15:1999

EH/3/6


BS ISO 5667-17 (Revision)

Guidance on sampling of suspended sedimentswill supersede BS ISO 5667-17:2000

EH/3/6

BS ISO 6538:-

Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids

BS ISO 6538-1

General rules for components with fixed orifice

MCE/18

BS ISO 6538-2

General rules for components with variable or fixed orifices

MCE/18

BS ISO 6538-3

Discharge methods for components with variable or fixed orifices

MCE/18

BS ISO 6538-4

Charge method for components with variable or fixed orifices

MCE/18

BS ISO 6538-5

Alternative test methods. Simple discharge test

MCE/18

BS ISO 7302

Cereals and cereal products. Determination of total fat content

AW/4

BS ISO 8178:-

Reciprocating internal combustion engines. Exhaust emission measurement


Definitions and methods of measurement of exhaust gas smoke under steady state conditionswill supersede BS ISO 8178-3:1994

MCE/14/-/5

BS ISO 8178-5Test fuels

MCE/14/-/5

BS ISO 8468

Ships and marine technology ships bridge layout and associated equipment. Requirements and guidelineswill supersede BS EN ISO 8468:1995

SME/32/5

BS ISO 9241:-

Ergonomics of human-system interaction

BS ISO 9241-20

Guidance for the accessibility of information communication equipment and services

PH/9

BS ISO 9413

Tyre valves. Dimensions and designationwill supersede BS AU 50-3.1E:2004

AUE/4

BS ISO 9612

Acoustics. Measurement and calculation of occupational noise engineering method

EH/1/3

BS ISO 9635:-

Agricultural irrigation equipment. Irrigation valves

BS ISO 9635-3Check valves

AGE/30

BS ISO 10110:-

Optics and photonics. Preparation of drawings for optical elements and systems

BS ISO 10110-7 (Revision)Surface imperfection tolerances

will supersede BS ISO 10110-7:1996CPW/172/1

BS ISO 11178:-

Tractors and machinery for agriculture and forestry. Serial control and communications data network

BS ISO 11783-3 (Revision)Data link layer

will supersede BS ISO 11783-3:1998AGE/6

BS ISO 12003:-

Agriculture and forestry tractors. Narrow-track wheeled tractors


Rear-mounted roll-over protective structureswill supersede BS ISO 12003-2:2002

AGE/6

BS ISO 12635 (Revision)

Durability of wood and wood-based products. Qualitative determination of quaternary ammonium compounds in woodwill supersede BS ISO 12635:1996

PAI/43

BS ISO 14132:-

Optics and photonics. Vocabulary for telescopic systems

BS ISO 14132-5Terms for night vision systems

CPW/172

BS ISO/IEC 14496:-

Information technology. Coding of audio-visual objects

BS ISO/IEC 14496-9Reference hardware description

IST/37

BS ISO 15715:2003/Amendment 1

Binders for paints and varnishes. Determination of turbidity

STI/3

BS ISO 15819

Cosmetics. Nitrosamines. Detection and determination of n-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS

CW/217

BS ISO 16212

Cosmetics. Microbiology. Enumeration of yeast and mould

CW/217

BS ISO 17382

Oil of magnolia flower, China (Michelia alba DC)

AW/54

BS ISO/IEC 18047:-

Information technology. Automatic identification and data capture techniques

BS ISO/IEC 18047-2

RFID device conformance test methods

IST/34


BS ISO/IEC 18047-6

International symbology specification. Data matrix

IST/34

BS ISO 18072:-

Ships and marine technology ship structures

BS ISO 18072-2

Requirements for their ultimate limit state assessment

SME/32/8

BS ISO 19072:-

Road vehicles. Connection interface for pyrotechnic devices, two way and three way connections

BS ISO 19072-2

Test methods and general performances requirements

AUE/16

BS ISO 19712:-

Plastics. Classification and performance of decorative solid surfacing material

BS ISO 19712-1Classification and specifications

PRI/76

BS ISO 19712-2Sheet goods

PRI/76

BS ISO 21094

Optics and photonics. Telescopic systems. Specifications for night vision devices

CPW/172

BS ISO 21100

Air cargo unit load devices. Performance requirements and test parameters

ACE/57

BS ISO 21138:-

Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)

BS ISO 21138-1

Material and performance specifications for pipes, fittings and the systems

PRI/88/1

BS ISO 21138-2

Pipes with smooth external surface (all materials), type a

PRI/88/1

BS ISO 21138-3

Pipes with a non-smooth external surface (all materials), type b

PRI/88/1

BS ISO 21212

Intelligent transport systems. Communications, air-interface, long and medium range (CALM). 2G cellular systems

EPL/278

BS ISO 21213

Intelligent transport systems. Communications, air-interface, long and medium range (CALM). 3G cellular systems

EPL/278

BS ISO 21299

Agriculture and forestry machinery equipment. Powered ride-on equipment for turf maintenance applications. Roll-over protective structures (ROPS). Test procedures and acceptance criteria

AGE/20

BS ISO 22036

Soil quality. Determination of trace elements in extracts of soil by inductively coupled plasma-atomic emission spectrometry (ICP-AES)

EH/4

BS ISO 22574

Road vehicles. Brake linings. Friction materials. Visual inspection

AUE/11

BS ISO 22856

Equipment for crop protection. Laboratory drift methods measurements. Wind tunnels

AGE/15

BS ISO 23392

Fresh and quick-frozen maize and peas. Determination of alcohol-insoluble solids content

AW/100

BS ISO 23996

Resilient floor coverings. Determination of density

PRI/60

BS ISO 23997

Resilient floor coverings. Determination of mass per unit area

PRI/60

BS ISO 23999

Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat

PRI/60

BS ISO 24153:-Random sampling procedures

BS ISO 24153-1

Quality control and designed experiment applications

SS/5

BS ISO 24353

Hygrothermal performance of building materials and products. Determination of moisture adsorption/desorption properties in response to humidity variation

B/540/8

BS ISO 24597

Microbeam analysis. Scanning electron microscopy. Measurement methods for image resolution

CII/9

BS ISO/IEC 24745

Information technology. Security techniques. Biometric template protection

IST/33

BS ISO/IEC TR 24800:-JPSearch

BS ISO/IEC TR 24800-1

System framework and components

IST/37

BS ISO 25780

Plastics piping systems for pressure and non-pressure water supply, irrigation or drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Components intended to be installed using trenchless

PRI/88/2


BS ISO/IEC 81060:-Non-invasive sphygmomanometers

BS ISO/IEC 81060-1

Requirements and test methods for mechanical type

CH/62/4

BS ISO XXXXXX

Water quality. Determination of individual isomers of nonylphenol. Method by solid phase extraction

EH/3/2BS ISO XXXXXX

Water quality. Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) in un-filtrated water samples. Method by solid phase extraction and liquid chromatograph-mass spectrometry

EH/3/2

BS IEC 60412

Scintillation detectors nomenclature/type numbering standard dimensions of scintillatorswill supersede BS 5210:1975

NCE/2

BS IEC 60601:-Medical electrical equipment

BS IEC 60601-2-44 (Edition 3)

Particular requirements for the safety of X-ray equipment for computed tomographywill supersede BS EN 60601-2-44:2001

CH/62/2

BS IEC 60976

Medical electrical equipment. Medical electron accelerators. Functional performance characteristics

CH/62/3

BS IEC 60988

Acoustic monitoring systems for loose parts detection. Characteristics, design criteria and operational procedures

NCE/8

BS IEC 61227

Nuclear power plants. Control rooms. Operator controls

NCE/8

BS IEC 61453

Nuclear instrumentation. Scintillation detector systems of gamma-ray energies for assay of radionuclides. Calibration and usage

NCE/2

BS IEC 61772

Nuclear power plants. Main control room. Application of visual display units (VDU)

NCE/8

BS IEC 61948:-

Nuclear medicine instrumentation. Routine tests

BS IEC 61948-4Radionuclide calibrators

CH/62/3

BS IEC 62232

Methods for the assessment of electric, magnetic and electromagnetic fields associated with human exposure

GEL/106

DD CLC/TS 16587

Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and connection systems

GEL/9/2

PD 5500 (Revision)

Specification for fusion welded pressure vesselswill supersede PD 5500:2003

PVE/1

PD 8010:-Code of practice for pipelines

PD 8010-3

Codified approach for the on-shore application of pipeline risk assessment for lUP advice to local planning authorities

PSE/17/2

PD CEN ISO/TR 3834:-

Quality requirements for welding. Fusion welding of metallic materials

PD CEN ISO/TR 3834-6

Guidance on implementing ISO 3834

WEE/-/1

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT05/00422006 DC

prEN 1548 Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing.Method for exposure to bitumen

B/546/2Comments for the above document are required by 15 November, 2005

05/19976767 DC

BS ISO 11783-10 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Part 10. Task controller and management information system data interchange

AGE/6

05/19978685 DC

BS EN 74-3 Couplers, spigot pins and base plates for use in falsework and scaffolds. Part 3. Plain base plates and spigot pins. Requirements and test methods

B/514/21

05/19982631 DC

BS ISO 9150 Protective clothing. Determination of behaviour of materials on impact of small splashes of molten metal

PH/3/2

05/19990229 DC

BS ISO 9928-2 Cranes. Crane driving manual. Part 2. Mobile cranes

MHE/3/5Comments for the above document are required by 24 October, 2005

05/30057604 DC

BS 8504-1 Beach safety flags. Part 1. Colour, shape and meaning

PH/8/2/1

05/30057907 DC

BS 6465-1 Sanitary installations. Part 1. Code of practice for design of sanitary facilities and scale of provision of sanitary appliances

B/503

05/30059424 DC

ISO 19134 Geographic information. Location based services. Multimodal routing and navigation

IST/36

of 69DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT

05/30067086 DC

EN 203-2-7 Gas heated catering equipment. Part 2-7. Specific requirements. Salamanders and rotisseries

GSE/19

05/30075032 DC

ISO 23181 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid

MCE/18/-/6

05/30082472 DC

BS 7121-1 Code of practice for safe use of cranes. Part 1. General

MHE/3/11Comments for the above document are required by 31 October, 2005

05/30086722 DC

EN 15329 Railway applications. Braking. Brake block holder and brake shoe key for railway vehicles

RAE/4

05/30086725 DC

EN 15328 Railway applications. Braking. Brake pads

RAE/4

05/30090874 DC

EN 15327-1 Railway applications. Passenger alarm subsystem. Part 1. General requirements and passenger interface for the passenger emergency brake system

RAE/4

05/30091636 DC

ISO 14577-4 Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 4. Test method for metallic and non-metallic coatings

ISE/NFE/4/5

05/30093062 DC

prEN 15269-2 Extended application of test results for doorsets and shutter assemblies. For doors and shutters. Part 2. Steel hinged and pivoted doorsets£18.00 members£36.00 non-members

FSH/22

05/30095753 DC

ISO 7500-2 Metallic materials. Verification of static uniaxial testing machines. Part 2. Tension creep testing machines. Verification of the force applied

ISE/NFE/4/1

05/30097610 DC

BS ISO 23714 Pulps. Determination of water retention value (WRV)

PAI/11Comments for the above document are required by 14 November, 2005

05/30098235 DC

ISO 21081-1 Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid. Part 1. General principles

MCE/18/-/6

05/30098238 DC

ISO 21081-2 Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid. Part 2. Filter blockage technique

MCE/18/-/6

05/30099720 DC

EN 12368 Traffic control equipment. Signal heads

EPL/526

05/30099723 DC

EN 12352 Traffic control equipment. Warning and safety light devices

EPL/526

05/30102528 DC

IEC 62385 Nuclear power plants. Instrumentation and control important to safety. Methods for assessing the performance of safety system instrument channels

NCE/2

05/30102865 DC

EN ISO 19493 Water quality. Guidance on marine biological surveys of littoral and sublittoral hard bottoms

EH/3/5

05/30103531 DC

BS IEC 62275 Cable management. Cable ties for cable installations

PEL/213Comments for the above document are required by 28 October, 2005

05/30106456 DC

IEC 62282-6 Fuel cell technologies. Part 6-1. Micro fuel cell power systems. Safety£18.00 members£36.00 non-members

GEL/105

05/30107743 DC

ISO/IEC 19794-7 Biometric data interchange. Part 7. Signature/sign data

IST/44Comments for the above document are required by 31 October, 2005

05/30107760 DC

ISO/IEC 24713-1 Biometric profiles for interoperability and data interchange. Part 1. Biometric reference architecture


05/30111064 DC

BS 7291-1 Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Part 1. General requirements

PRI/88/2Comments for the above document are required by 31 December, 2005

05/30111066 DC

BS 7291-2 Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Part 2. Specification for polybutylene (PB) pipes and associated fittings


05/30111068 DC

BS 7291-3 Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Part 3: Specification for cross-linked polyethylene (PE-X) pipes and associated fittings



05/30111479 DC

ISO/IEC 19794-8 Biometrics. Biometric data interchange formats. Part 8. Finger pattern skeletal data

IST/44

05/30113382 DC

BS ISO 21630 Pumps. Testing. Submersible mixers for wastewater and similar applications

MCE/6Comments for the above document are required by 31 October, 2005

05/30115485 DC

EN 1739 Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure

B/523Comments for the above document are required by 15 November, 2005

05/30115489 DC

EN 15304 Determination of the freeze-thaw resistance of autoclaved aerated concrete

B/523Comments for the above document are required by 15 November, 2005

05/30117679 DC

IEC 60515 ED 2 Nuclear power plants. Instrumentation important to safety. Radiation detectors. Characteristics and test methods

NCE/8

05/30118212 DC

BS 8469 Personal protective equipment for fire-fighters. Assessment of ergonomic performance and compatibility. Requirements and test methods

PH/14Comments for the above document are required by 31 October, 2005

05/30122495 DC

IEC 62153-4-1 Metallic communication cable test methods. Part 4-1. Electro magnetic compatibility (EMC). Introduction to electromagnetic (EMC) screening measurements

EPL/46

05/30122498 DC

IEC 62153-4-0 Metallic communication cable test methods. Part 4-0. Electro magnetic compatibility (EMC). Relationship between surface transfer impedance and screening attenuation, recommended limits

EPL/46

05/30123357 DC

BS 8504-2 Beach safety flags. Part 2. Materials

PH/8/2/1

05/30124529 DC

ISO 20552 Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry

EH/2/2

05/30126248 DC

BS EN 71-5 Safety of toys. Part 5. Chemical toys (sets) other than experimental sets

CW/15Comments for the above document are required by 15 October, 2005

05/30127022 DC

ISO 4928 Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120$0DC max.)

PRI/69

05/30127561 DC

BS 8470 Code of practice for the secure destruction of confidential material

GW/2

05/30127645 DC

ISO 15364 Ships and marine technology. Pressure/vacuum valves for cargo tanks

SME/32/3

05/30128342 DC

ISO 15223-1 Medical devices. Symbols to be used with medical device labels, labelling, and information to be supplied. Part 1. General requirements

CH/210/3

05/30128661 DC

EN 13779 Ventilation for non residential buildings. Performance requirements for ventilation and room-conditioning systems

RHE/2

05/30129194 DC

EN 15317 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment

WEE/46

05/30129363 DC

ISO 9170-1 Terminal units for medical gas pipeline systems. Part 1. Terminal units for use with compressed medical gases and vacuum

CH/121/6

05/30129368 DC

ISO 9170-2 Terminal units for medical gas pipeline systems. Part 2. Terminal units for anaesthetic gas scavenging systems

CH/121/6

05/30129374 DC

ISO 15002 Flow-metering devices for connection to terminal units of medical gas pipeline systems

CH/121/6

05/30129688 DC

IEC 61156-5-1 ED 2 Multicore and symmetrical pair/quad cables for digital communications. Part 5-1. Symmetrical pair/quad cables with transmission characteristics up to 600 MHz. Horizontal floor wiring. Blank detail specification

EPL/46

05/30133088 DC

BS ISO 18332 Metallic and other inorganic coatings. Definitions and conventions concerning porosity

STI/33Comments for the above document are required by 28 October, 2005

05/30133509 DC

BS 7593 Code of practice for treatment of water in domestic hot water central heating systems

CII/62Comments for the above document are required by 31 December, 2005


05/30133687 DC

BS EN 1269 A1 Textile floor coverings. Assessment of impregnations in needled floor coverings by means of a soiling test

PRI/3

05/30135018 DC

ISO/IEC 24711 Method for determination of ink cartridge yield for color inkjet printers and multifunction devices that may contain printer components

IST/3

05/30135332 DC

BS 6102-3 A4 Cycles. Part 3. Specification for photometric and physical requirements of lighting equipment

GME/25

05/30135987 DC

EN 161 Automatic shut-off valves for gas burners and gas appliances

GSE/22

05/30136075 DC

ISO 1841 Cosmetics. Microbiology. Detection of Candida albicans

CW/217Comments for the above document are required by 31 October, 2005

05/30137202 DC

ISO/IEC 18000-6 A1 Information technology. Radio frequency identification for item management. Part 6. Parameters for air interface communications at 860 MHz to 960 MHz£18.00 members£36.00 non-members


05/30137420 DC

IEC 60086-1 Primary batteries. Part 1. General

CPL/35

05/30137514 DC

IEC 60747-14-4 Discrete semiconductor devices. Part 14-4. Semiconductor accelerometers£18.00 members£36.00 non-members

EPL/47

05/30137551 DC

ISO 21415-2 Wheat and wheat flour. Gluten content. Part 2. Determination of wet gluten by mechanical means

AW/4

05/30137579 DC

EN 13834 Cookware. Ovenware for use in traditional domestic ovens

CW/9

05/30137582 DC

ISO 24497-1 Non-destructive testing. Metal magnetic memory. Part 1. General requirements

WEE/46

05/30137585 DC

ISO 24497-2 Non-destructive testing. Metal magnetic memory. Part 2. Terms and definitions

WEE/46

05/30137588 DC

ISO 24497-3 Non-destructive testing. Metal magnetic memory. Part 3. Inspection of welds

WEE/46

05/30137603 DC

ISO 24014-1 Public transport. Interoperable fare management system. Part 1. Architecture

EPL/278

05/30137614 DC

ISO 18672-1 Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Part 1. Pipes and fittings with flexible joints

PRI/88/2

05/30137621 DC

EN 1564/prA1 Founding. Austempered ductile cast irons

ISE/35Comments for the above document are required by 28 October, 2005

05/30137627 DC

EN ISO 16000-7 Indoor air. Part 7. Sampling strategy for determination of airborne asbestos fibre concentrations

EH/2/3

05/30137694 DC

ISO 21501-2 Determination of particle size distribution. Single particle light-interaction methods. Part 2. Light-scattering liquid-borne particle counter

LBI/37

05/30137697 DC

ISO 21501-3 Determination of particle size distribution. Single particle light-interaction methods. Part 3. Light-extinction liquid-borne particle counter

LBI/37

05/30137700 DC

ISO 21501-4 Determination of particle size distribution. Single particle light-interaction methods. Part 4. Light-scattering airborne particle counter for clean spaces

LBI/37

05/30137717 DC

EN 15312 Free access multi-sports equipment. Requirements, including safety and test methods

SW/65

05/30137729 DC

ISO 8061 AMD 3 Alpine ski-bindings. Selection of release torque values

SW/136

05/30137732 DC

ISO 11088 AMD 1 Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system

SW/136

05/30137735 DC

ISO 22264 Telemark ski-boots for adults. Interface with Telemark ski-bindings. Requirements and test methods

SW/136

05/30137738 DC

ISO 9523 Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods

SW/136


05/30137754 DC

ISO/IEC 18004 Information technology. Automatic identification and data capture techniques. Bar code symbology specification. QR code£18.00 members£36.00 non-members

IST/34

05/30137789 DC

BS ISO 12465 Plywood. Specifications

B/541

05/30137797 DC

IEC 61400-25-1 ED 1 Wind turbines. Part 25-1. Communications for monitoring and control of wind power plants. Overall description of principles and models

PEL/88

05/30137801 DC

IEC 61400-25-2 ED 1 Wind turbines. Part 25-2. Communications for monitoring and control of wind power plants. Information models

PEL/88

05/30137805 DC

IEC 61400-25-3 ED 1 Wind turbines. Part 25-3. Communications for monitoring and control of wind power plants. Information exchange models

PEL/88

05/30137809 DC

IEC 61400-25-4 ED 1 Wind turbines. Part 25-4. Communications for monitoring and control of wind power plants. Mapping to XML based communication profile£18.00 members£36.00 non-members

PEL/88

05/30137813 DC

IEC 61400-25-5 ED 1 Wind turbines. Part 25-5. Communications for monitoring and control of wind power plants. Conformance testing

PEL/88

05/30137839 DC

ISO 3776-1 Tractors and machinery for agriculture. Seat belts. Part 1. Anchorage location requirements

AGE/6

05/30137842 DC

ISO 9679 Aerospace. Clamps for fluid systems. Test methods

ACE/69

05/30137845 DC

ISO 12319 Aerospace. Clamps 'P' (loop style). Procurement specification

ACE/69

05/30137850 DC

IEC 62215-2 Integrated circuits. Measurement of impulse immunity. Part 2. Impulse injection method

EPL/47

05/30137873 DC

EN 15315 Heating systems in buildings. Energy performance of buildings. Overall energy use, primary energy and CO$d2 emissions

RHE/24

05/30137882 DC

EN 15316-1 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 1. General

RHE/24

05/30137885 DC

EN 15316-3-1 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 3.1. Domestic hot water systems, characterisation of needs (tapping requirements)

RHE/24

05/30137890 DC

EN 15316-3-2 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 3.2. Domestic hot water systems, distribution

RHE/24

05/30137893 DC

EN 15316-3-3 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 3-3. Domestic hot water systems, generation

RHE/24

05/30137922 DC

ISO 13865-3 Safety of machinery. Pressure-sensitive protective devices. Part 3. General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices

MCE/3

05/30137930 DC

ISO 16100-4 Industrial automation systems and integration. Manufacturing software capability profiling for interoperability. Part 4. Conformance test methods, criteria and reports

AMT/5

05/30137946 DC

EN 15269-1 Extended application of test results for fire resistance for doorsets and shutter assemblies. For doors and windows. Part 1. General requirements for fire resistance

FSH/22

05/30137949 DC

EN 15269-3 Extended application of test results for fire resistance for doorsets and shutter assemblies. For doors and shutters. Part 3. Timber hinged and pivoted doorsets

FSH/22

05/30137978 DC

EN 15273-1 Railway applications. Gauges. Part 1. Generalities. Common rules for infrastructure and rolling stock

RAE/1/-/12

05/30137981 DC

EN 15273-2 Railway applications. Gauges. Part 2. Rolling stock gauges£18.00 members£36.00 non-members

RAE/1/-/12

05/30138000 DC

IEC 60155 AMD 2 Glow-starters for fluorescent lamps

CPL/34/1

05/30138005 DC

IEC 60079-14 ED 4 Electrical apparatus for explosive gas atmospheres. Part 14. Electrical installations in hazardous areas (other than mines)

GEL/31/11


05/30138009 DC

EN 15319 General principles of design of fibrous (gypsum) plaster works

B/544/1

05/30138017 DC

ISO/IEC 14471 Information technology. Software engineering. Guidelines for the adoption of CASE tools


05/30138025 DC

ISO/IEC 14102 Information technology. Guideline for the evaluation and selection of CASE tools


05/30138030 DCISO 2074 Plywood. Vocabulary

B/541

05/30138051 DC

EN 60335-2-79/prA1 Household and similar electrical appliances. Safety. Part 2-79. Particular requirements for high pressure cleaners and steam cleaners

CPL/61/10

05/30138064 DC

IEC CISPR16-1-1 AMD 2 ED 1 Specification for radio disturbance and immunity measuring apparatus methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Selectivity of measuring receiver in the frequency range 1GHz to 18GHz

GEL/210/12

05/30138070 DC

IEC 60598-2-27 ED 1 Luminaires. Part 2-27. Luminaires for neon lamp and similar equipment

CPL/34/4

05/30138085 DC

IEC CISPR 16-2-1 AMD 2 ED 1 Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-1. Methods of measurement of disturbance and immunity. Conducted disturbance measurements

GEL/210/12

05/30138123 DC

BS ISO 8836 Suction catheters for use in the respiratory tract

CH/121/2

05/30138125 DC

ISO 9911 Agricultural irrigation equipment. Manually operated small plastics valves

AGE/30

05/30138145 DC

BS 6172 AMD 1 Specification of installation of gas cooking appliances (1st, 2nd and 3rd family gases)

GSE/30/-/10

05/30138148 DC

EN 215:2004/prA1 Thermostatic radiator valves. Requirements and test methods

RHE/16Comments for the above document are required by 14 November, 2005

05/30138201 DC

ISO 12696 Cathodic protection of steel in concrete

ISE/NFE/8

05/30138208 DC

ISO 9635-1 Agricultural irrigation equipment. Irrigation valves. Part 1. General requirements

AGE/30

05/30138211 DC

ISO 9635-2 Agricultural irrigation equipment. Irrigation valves. Part 2. Isolating valves

AGE/30

05/30138214 DC

ISO 9635-3 Agricultural irrigation equipment. Irrigation valves. Part 3. Check valves

AGE/30

05/30138217 DC

ISO 9635-4 Agricultural irrigation equipment. Irrigation valves. Part 4. Air valves

AGE/30

05/30138220 DC

ISO 9635-5 Agricultural irrigation equipment. Irrigation valves. Part 5. Control valves

AGE/30

05/30138231 DC

ISO 8407 Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens

ISE/NFE/8

05/30138250 DC

IEC CISPR 16-4-1 AMD 2 Specification for radio disturbance and immunity measuring apparatus and methods. Part 4-1. Uncertainties, statistics and limit modelling. Uncertainties in standardized EMC tests

GEL/210/12

05/30138264 DC

EN 12592 Bitumen and bituminous binders. Determination of solubility

PTI/13

05/30138267 DC

EN 1426 Bitumen and bituminous binders. Determination of needle penetration

PTI/13

05/30138270 DC

EN 12593 Bitumen and bituminous binders. Determination of the Fraass breaking point

PTI/13

05/30138273 DC

EN 1427 Bitumen and bituminous binders. Determination of the softening point. Ring and ball method

PTI/13

05/30138276 DC

EN 12595 Bitumen and bituminous binders. Determination of kinematic viscosity

PTI/13

05/30138279 DC

EN 12594 Bitumen and bituminous binders. Preparation of test samples

PTI/13

05/30138282 DC

EN 12596 Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary

PTI/13


05/30138285 DC

EN 12606-1 Bitumen and bituminous binders. Determination of the paraffin wax content. Part 1. Method by distillation

PTI/13

05/30138288 DC

EN 12607-1 Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. Part 1. RTFOT method

PTI/13

05/30138291 DC

EN 12607-2 Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. Part 2. TFOT method

PTI/13

05/30138294 DC

EN 12607-3 Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. Part 3. RFT method

PTI/13

05/30138310 DC

ISO 15882 ED 2 Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results

LBI/35Comments for the above document are required by 18 October, 2005

05/30138350 DC

EN 15322 Bitumen and bituminous binders. Framework for specifying cutback and fluxed bituminous binders

PTI/13

05/30138353 DC

EN 15323 Bitumen and bituminous binders. Accelerated long-term ageing conditioning by the rotating cylinder method (RCAT)

PTI/13

05/30138357 DC

EN 15324 Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode

PTI/13

05/30138360 DC

EN 15325 Bitumen and bituminous binders. Determination of zero shear viscosity (ZSV) using a shear stress rheometer in creep mode

PTI/13

05/30138363 DC

EN 15326 Bitumen and bituminous binders. Measurement of density and specific gravity. Capillary-stoppered pyknometer method

PTI/13

05/30138371 DC

IEC 60068-2-27 ED 4 Basic environmental testing procedures. Part 2-27. Tests. Test Ea and guidance. Shock and bump

GEL/104

05/30138375 DC

IEC 60068-2-31 ED 2 Basic environmental testing procedures. Part 2-31. Tests. Test Ec. Rough handling shocks, primarily for equipment-type specimens

GEL/104

05/30138385 DC

EN 50440 Efficiency of domestic electrical storage water-heaters

CPL/59

05/30138424 DC

BS 8450 Code of practice for installation of electrical and electronic equipment in ships

JPEL/18

05/30138425 DC

ISO 4254-5 Agricultural machinery. Safety. Part 5. Power-driven soil-working equipment

AGE/6

05/30138432 DC

BS EN 1501-1 Refuse collection vehicles. General requirements and safety requirements. Part 1. Rear loaded refuse collection vehicles

B/508/1

05/30138471 DC

EN ISO 16276-2 Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a dry film. Part 2. Cross-cut testing and X-cut testing

STI/27

05/30138485 DC

EN 50469 Lightning protection systems. Symbols

GEL/81

05/30138590 DC

BS 6007 Electric cables. Single core unsheathed heat-resisting cables for voltages up to and including 450/750 V, for internal wiring

GEL/20/17

05/30138592 DC

BS 6231 Electric cables. 600/1000 V, PVC insulated cables for switchgear and controlgear wiring

GEL/20/17

05/30138596 DC

BS 6195 Electric cables. Insulated flexible cables and cords for coil leads

GEL/20/17

DOCUMENTS NOT ISSUED AS DPCsBS EN 1994:-

Eurocode 4. Design of composite steel and concrete structures

BS EN 1994-1:-General rules

BS EN 1994-1-2Structural fire design

This standard will shortly be prepared for publication. Please submit any comments to the committee secretary (below).Contact: Frank ThomasEmail: [email protected]

B/525/4

BS ISO 13357:-

Petroleum products. Determination of the filterability of lubricating oils

of 69DOCUMENTS NOT ISSUED AS DPCs

BS ISO 13357-2Procedure for dry oils

Copies of this document are available upon request from the committee secretary (below).Contact: Simon MerrimanEmail: [email protected]

MCE/18/-/16

BS ISO 21148

Cosmetics. Microbiology. General instructions for microbiological examination

Please direct any comments or queries regarding this forthcoming standard to the committee secretary (below).Contact: William BuckinghamEmail: [email protected]

CW/217

prEN 2602

Aerospace series. Ports for adaptors, threaded, with lockring. Geometric configuration

To view a copy of this document, which has now been issued as a Final Draft, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: [email protected]

ACE/69

prEN 2603

Aerospace series. Port ends for adaptors, threaded, with lockring. Geometric configuration


ACE/69

prEN 2604

Aerospace series. 8$0DC 30' interface for adaptors, threaded, with lockring. Geometric configuration


ACE/69

prEN 2605

Aerospace series. 24$0DC interface for adaptors, threaded, with lockring. Geometric configuration


ACE/69

prEN 2608

Aerospace series. Installation and removal requirements for 8$0DC 30' adaptors, threaded, with lockring


ACE/69

prEN 2645

Aerospace series. Lockrings for adaptors, threaded, with lockring. Dimensions


ACE/69

prEN 2713:-

Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 200$0DC

prEN 2713-003

Screened (spiral) and jacketed, ink jet printable. Product standard


ACE/6/-/2

prEN 2713-007

Screened (spiral) and jacketed, UV laser printable. Product standard


ACE/6/-/2

prEN 2714:-

Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 260$0DC

prEN 2714-007

Screened (spiral) and jacketed, UV laser printable. Product standard


ACE/6/-/2

prEN 2714-013

DR family, screened (spiral) and jacketed, UV laser printable. Product standard


ACE/6/-/2

prEN 4610

Aerospace series. Pipe coupling 8$0DC 30' in titanium alloy. Elbows 45$0DC, with thrust wire nut


ACE/69

of 69DOCUMENTS NOT ISSUED AS DPCs

prEN 15285

Agglomerated stone. Modular tiles for flooring (internal and external)

This Draft European Standard has been issued by CEN for Enquiry with a closing date of 30 November, 2005. It will not be issued for public comment in the UK because it covers agglomerated stone as a generic product in which the UK has little or no interesContact: David FisherEmail: [email protected]

B/545

prEN 15286

Agglomerated stone. Slabs and tiles for wall finishes (internal and external)

This Draft European Standard has been issued by CEN for Enquiry with a closing date of 30 November, 2005. It will not be issued for public comment in the UK because it covers agglomerated stone as a generic product in which the UK has little or no interesContact: David FisherEmail: [email protected]

B/545

prEN 45510:-

Guide for procurement of power station equipment

prEN 45510-2:-Electrical equipment

prEN 45510-2-9Cabling systems

This Draft European Standard has been circulated by CEN/CENELEC at Enquiry stage. However, the UK committee responsible for input is dormant and it has therefore not been circulated for public comment. The text of the Enquiry Draft is nonetheless availablContact: Committee Service CentreEmail: [email protected]

E/-/20

ISO 6580:2005

General-purpose industrial fans. Circular flanges. Dimensions

This International Standard has recently been published by ISO, and will shortly be implemented in the UK as a revision of dual-numbered standard BS 6339:1983 (ISO 6580:1981).Contact: Committee Service CentreEmail: [email protected]

MCE/17

ISO/IEC 15938:-

Information technology. Multimedia content description interface

ISO/IEC 15938-4:2002/FPDAM 2Audio

This standard has been circulated to ISO members as a final committee draft by ISO/IEC JTC 1/SC 29. Copies of the text are available from the committee secretary (below), to whom comments should be submitted by 30 October, 2005.Contact: Jean StrideEmail: [email protected]

IST/37

CEN/CENELEC UNIQUE ACCEPTANCE PROCEDUREBS EN 12961:2005

Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact

The text of this Draft European Standard has been circulated for approval to publish by October 2005. Copies are available on request using document reference B/546.0036/05 from the committee secretary (below), to whom comments should be submitted by 30Contact: Ray KerriganEmail: [email protected]

B/546

prEN 1854

Pressure sensing devices for gas burners and gas burning appliances

Please direct any comments regarding this Draft European Standard to the committee secretary (below).Contact: Bernard WilliamsEmail: [email protected]

GSE/22/12

prEN ISO 4925:-

Binders for paints and varnishes. Determination of softening point

prEN ISO 4925-1:2005Ring-and-ball method

This Draft European Standard has already been implemented in the UK as BS ISO 4925-1:2004. Consequently the UK will support its adoption as a BS EN ISO standard.Contact: Committee Service CentreEmail: [email protected]

STI/3

prEN ISO 4925-2:2005Cup-and-ball method

This Draft European Standard has already been implemented in the UK as BS ISO 4925-2:2004. Consequently the UK will support its adoption as a BS EN ISO standard.Contact: Committee Service CentreEmail: [email protected]

STI/3

EN ISO 6141

Gas analysis. Requirements for certificates for calibration gases and gas mixtures

This standard, which has not been issued as a Draft for Public Comment and is identical to ISO 6141:2000, has been circulated to CEN members for voting. Please submit any comments to the committee secretary (below) by 19 December, 2005.Contact: Sheila O'ReillyEmail: sheila.o'[email protected]

PTI/15

EN ISO 6143

Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures


PTI/15

of 69CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE

EN ISO 6144

Gas analysis. Preparation of calibration gas mixtures. Static volumetric method


PTI/15

prEN ISO 10283:2005

Binders for paints and varnishes. Determination of monomeric diisocyanates in polyisocyanate resins

This Draft European Standard has already been implemented in the UK as BS 6782-10:1998. Consequently the UK will support its adoption as a BS EN ISO standard.Contact: Committee Service CentreEmail: [email protected]

STI/3

EN 12259:-

Fixed firefighting systems. Components for sprinkler and water spray systems

EN 12259-1:1999/prA1:2001Sprinklers

This is a proposed amendment to normative annex B Test to determine operating temperatures of fusible link sprinklers and glass bulb sprinklers, specifically to the text of B.1 Apparatus & B.2 Procedure and to figure B.1, to address errors that have beenContact: Mike HodsonEmail: [email protected]

FSH/18/2

EN 12817:2002/prA1

LPG equipment and accessories. Inspection and requalification of LPG tanks up to and including 13 m$d3 overground

This draft amendment has been circulated by CEN/286 under a shortened UAP procedure. A copy of the text may be obtained on request from the committee secretary (below).Contact: Tim NewinsEmail: [email protected]

PVE/19

EN 12818:2002/prA1

LPG equipment and accessories. Inspection and requalification of LPG tanks up to and including 13 m$d3 underground


PVE/19

EN 13952:2003

LPG equipment and accessories. Filling procedures for LPG cylinders


PVE/19

prEN 14870:-

Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems

prEN 14870-3Flanges

The text of this ISO TC 67 SC 2 document has been issued by CEN TC 12. The UK participated actively in the preparation of the equivalent ISO publication, so it is accordingly proposed that a vote of acceptance be submitted in the CEN TC 12 ballot. PleaseContact: Keith SeydeEmail: [email protected]

PSE/17

prEN ISO 15715:2005

Binders for paints and varnishes. Determination of turbidity

This Draft European Standard has already been implemented in the UK as BS ISO 15715:2003. Consequently the UK will support its adoption as a BS EN ISO standard.Contact: Committee Service CentreEmail: [email protected]

STI/3

CEN EUROPEAN STANDARDS

EN 492:-

Fibre-cement slates and fittings. Product specification and test methodsAMENDMENT 1:August 2005to EN 492:2004


B/542/4

EN 494:-

Fibre-cement profiled sheets and fittings. Product specification and test methodsAMENDMENT 1:August 2005to EN 494:2004


B/542/4

EN 681:-

Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications

EN 681-1:-Vulcanized rubber

AMENDMENT 3:August 2005to EN 681-1:1996


PRI/70

EN 681-2:-Thermoplastic elastomers

AMENDMENT 2:August 2005to EN 681-2:2000


PRI/70

EN 681-3:-

Cellular materials of vulcanized rubberAMENDMENT 3:August 2005to EN 681-3:2000


PRI/70

EN 681-4:-

Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Part 4. Cast polyurethane sealing elementsAMENDMENT 2:August 2005to EN 681-4:2000


PRI/70

of 69CEN EUROPEAN STANDARDS

EN 682:-

Elastomeric seals. Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluidsAMENDMENT 1:August 2005to EN 682:2005


PRI/70

EN 695:2005

Kitchen sinks. Connecting dimensions£49.40 members£52.00 non-members

B/503

EN 957:-Stationary training equipment

EN 957-1:2005

General safety requirements and test methods£60.80 members£64.00 non-members

SW/136/4

EN 957-10:2005

Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods£49.40 members£52.00 non-members

SW/136/4

EN 1001:-

Durability of wood and wood-based products. Terminology

EN 1001-2:2005Vocabulary


B/515

EN 1071:-

Advanced technical ceramics. Methods of test for ceramic coatings

EN 1071-3:2005

Determination of adhesion and other mechanical failure modes by a scratch test£114.00 members£120.00 non-members

RPI/13

EN 1097:-

Tests for mechanical and physical properties of aggregates

EN 1097-9:-

Determination of the resistance to wear by abrasion from studded tyres. Nordic testAMENDMENT 1:August 2005to EN 1097-9:1998


B/502/6

EN 1104:2005

Paper and board intended to come into contact with foodstuffs. Determination of the transfer of antimicrobial constituents£49.40 members£52.00 non-members

CW/47/3

EN 1266:-

Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gasesAMENDMENT 1:August 2005to EN 1266:2002


GSE/36

EN 1504:-

Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity

EN 1504-1:2005Definitions


B/517/8

EN 1744:-

Tests for chemical properties of aggregates

EN 1744-4:2005

Determination of water susceptibility of fillers for bituminous mixtures£60.80 members£64.00 non-members

B/502

EN 1888:-

Child care articles. Wheeled child conveyances. Safety requirements and test methodsAMENDMENT 1:August 2005to EN 1888:2003


CW/39

EN 1888:-

Child care articles. Wheeled child conveyances. Safety requirements and test methodsAMENDMENT 2:August 2005to EN 1888:2003


CW/39

EN 1888:-

Child care articles. Wheeled child conveyances. Safety requirements and test methods.AMENDMENT 3:August 2005to EN 1888:2003


CW/39

EN 2088:2005

Aerospace series. Aluminium alloy AL-P2014A-T4 or T42. Clad sheet and strip. 0,4 mm < or = a < or = 6 mm£49.40 members£52.00 non-members

ACE/61/-/24

EN 2731:2005

Aerospace series. Magnesium alloy MG-C46001-T6. Sand casting£49.40 members£52.00 non-members

ACE/61/-/24

EN 4204:2005

Aerospace series. Aluminium alloy AL-P8090-T841. Sheet. 0,6 mm <= a <= 6 mm£49.40 members£52.00 non-members

ACE/61/-/24

EN 4449:2005

Aerospace series. Aluminium alloy AL-P7050-T76. Sheet. 0,8 mm <= a <= 6 mm£49.40 members£52.00 non-members

ACE/61/-/24


EN 10027:-Designation system for steels

EN 10027-1:2005Steel names


ISE/5

EN 10224:-

Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditionsAMENDMENT 1:June 2005to EN 10224:2002


ISE/8

EN 10226:-

Pipe threads where pressure-tight joints are made on the threads

EN 10226-2:2005

Taper external threads and taper internal threads. Dimensions, tolerances and designation.£49.40 members£52.00 non-members

ISE/19

EN 12044:2005

Footwear, leather and imitation leather goods manufacturing machines. Cutting and punching machines. Safety requirements£121.60 members£128.00 non-members

MCE/3/12

EN 12186:-

Gas supply systems. Gas pressure regulating stations for transmission and distribution. Functional requirementsAMENDMENT 1:August 2005to EN 12186:2000


GSE/33

EN 12279:-

Gas supply systems. Gas pressure regulating installations on service lines. Functional requirementsAMENDMENT 1:August 2005to EN 12279:2000


GSE/33

EN 12331:-

Food processing machinery. Mincing machines. Safety and hygiene requirementsAMENDMENT 1:July 2005to EN 12331:2003


MCE/3/5

EN 12467:-

Fibre-cement flat sheets. Product specification and test methodsAMENDMENT 1:August 2005to EN 12467:2004


B/542/4

EN 12497:2005

Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of mercury in an aqueous extract£49.40 members£52.00 non-members

CW/47

EN 12498:2005

Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of cadmium and lead in an aqueous extract£49.40 members£52.00 non-members

CW/47

EN 12546:-

Materials and articles in contact with foodstuffs. Insulated containers for domestic use

EN 12546-1:-

Specification for vacuum ware, insulated flasks and jugsAMENDMENT 1:March 2005to EN 12546-1:2005


CW/9

EN 12641:-

Swap bodies and commercial vehicles. Tarpaulins

EN 12641-1:2005Minimum requirements


TW/1

EN 13084:-Free-standing chimneys

EN 13084-4:2005Brick liners. Design and execution


B/525/13

EN 13136:-

Refrigerating systems and heat pumps. Pressure relief devices and their associated piping. Method for calculationAMENDMENT 1:June 2005to EN 13136:2001


RHE/18

EN 13155:-

Cranes. Non-fixed load lifting attachmentsAMENDMENT 1:August 2005to EN 13155:2003


MHE/3/5

EN 13209:-

Child use and care articles. Baby carriers. Safety requirements and test methods

EN 13209-2:2005Soft carriers


CW/41

EN 13480:-Metallic industrial piping

EN 13480-3:-

Design and calculation. Calculation method for large openingsAMENDMENT 1:August 2005to EN 13480-3:2002


PVE/10

EN 13518:-

Footwear. Test methods for uppers. Water resistanceAMENDMENT 1:July 2005to EN 13518:2001


TCI/69


EN 13732:-

Food processing machinery. Bulk milk coolers on farms. Requirements for construction, performance, suitability for use, safety and hygiene.AMENDMENT 1:August 2005to EN 13732:2002


MCE/3/5

EN 13845:2005

Resilient floor coverings. Polyvinyl chloride floor coverings with particle based enhanced slip resistance. Specification£60.80 members£64.00 non-members

PRI/60

EN 14241:-

Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods

EN 14241-1:2005Seals in flue liners


B/506/2

EN 14321:-

Glass in building. Thermally toughened alkaline earth silicate safety glass

EN 14321-2:2005

Evaluation of conformity. Product standard£100.70 members£106.00 non-members

B/520/1

EN 14471:2005

Chimneys. System chimneys with plastic flue liners. Requirements and test methods£121.60 members£128.00 non-members

B/506/2

EN 14501:2005

Blinds and shutters. Thermal and visual comfort. Performance characteristics and classification£87.40 members£92.00 non-members

B/538/3

EN 14600:2005

Doorsets and openable windows with fire resisting and/or smoke control characteristics. Requirements and classification£87.40 members£92.00 non-members

B/538/2

EN 14639:2005

Crude tar and crude benzole. Characteristics and test methods£49.40 members£52.00 non-members

CII/56

EN 14672:2005

Characterization of sludges. Determination of total phosphorous£49.40 members£52.00 non-members

EH/5

EN 14719:2005

Pulp, paper and board. Determination of the diisopropylnaphtalene (DIPN) content by solvent extraction£49.40 members£52.00 non-members

PAI/11

EN 14721:2005

Precast concrete products. Test method for metallic fibre concrete. Measuring the fibre content in fresh and hardened concrete£49.40 members£52.00 non-members

B/524

EN 14735:2005

Characterisation of waste. Preparation of waste sample for ecotoxicity test.£100.70 members£106.00 non-members

B/508/3

EN 14744:2005

Inland navigation vessels and sea-going vessels. Navigation light£100.70 members£106.00 non-members

SME/32/7

EN 14757:2005

Water quality. Sampling of fish with multi-mesh gillnets£87.40 members£92.00 non-members

EH/3/5

EN 14784:-

Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates

EN 14784-1:2005Classification of systems


WEE/46

EN 14784-2:2005

General principles for testing of metallic materials using X-rays and gamma rays£60.80 members£64.00 non-members

WEE/46

EN 14864:2005

Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification£49.40 members£52.00 non-members

STI/36

EN 14868:2005

Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems£60.80 members£64.00 non-members

ISE/NFE/8

EN 14873:-

Furniture removal activities. Storage of furniture and personal effects for private individuals

EN 14873-2:2005Provision of the service


TW/2

EN 14880:2005

Surface active agents. Determination of inorganic sulfate content in anionic surface active agents. Potentiometric lead selective electrode titration method£49.40 members£52.00 non-members

CII/34


EN 14881:2005

Surface active agents. Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines. Gas-chromatographic method£49.40 members£52.00 non-members

CII/34

EN 14882:2005

Rubber or plastic coated fabrics. Determination of the static and dynamic coefficient of friction£49.40 members£52.00 non-members

TCI/69

EN 14888:2005

Fertilizers and liming materials. Determination of cadmium content£60.80 members£64.00 non-members

CII/37

EN 14902:2005

Ambient air quality. Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter£121.60 members£128.00 non-members

EH/2/3

CEN WORKSHOP AGREEMENTSCWA 14729:-The Intrastat system

CWA 14729-1:2005The implementation model

supersedes CWA 14729-1:2003


CWA 14729-2:2005

Message implementation guideline of INSTAT/XMLsupersedes CWA 14729-2:2003


CWA 14729-3:2005

Message implementation guideline of INSRES/XMLsupersedes CWA 14729-3:2003


CWA 15295:2005

Description of references and data models for classificationno current standard is superseded


CWA 15374

Security management system for suppliers to the secure printing industryno current standard is superseded


CWA 15375:2005

Separators for marine residual fuel. Performance testing using specific test oil.no current standard is superseded


CEN REPORTS

CEN/TR 15120:2005

Tanks for transport of dangerous goods. Guidance and recommendations for loading, transport and unloading£100.70 members£106.00 non-members

AUE/18

CEN/TR 15126:2005

Characterization of sludges. Good practice to landfill of sludges and sludges treatment residues£87.40 members£92.00 non-members

EH/5

CEN/TR 15138:2005

Petroleum products and other liquids. Guide to flash point testing£49.40 members£52.00 non-members

PTI/13

CEN/TR 15139:2005

Petroleum products and other liquids. Applicability of test methods on sulfur determination in petrol and diesel fuel£49.40 members£52.00 non-members

PTI/13

CEN/TR 15160:2005

Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests£100.70 members£106.00 non-members

PTI/13

CEN/TR 15225:2005

Guidance on factory production control for the CE marking (attestation of conformity 2+) of designed masonry mortars£49.40 members£52.00 non-members

B/519

CEN/TR 15230:2005

Workplace atmospheres. Guidance for sampling of inhalable, thoracic and respirable aerosol fractions£87.40 members£92.00 non-members

EH/2/2

CEN TECHNICAL SPECIFICATIONSCEN/TS 13149:-

Public transport. Road vehicle scheduling and control systems

CEN/TS 13149-6:2005CAN message content


EPL/278

CEN/TS 15053:2005

Non-destructive testing. Recommendations for discontinuities-types in test specimens for examination£60.80 members£64.00 non-members

WEE/46

CEN/TS 15103:2005

Solid biofuels. Methods for the determination of bulk density£49.40 members£52.00 non-members

PTI/17

of 69CEN TECHNICAL SPECIFICATIONS

CEN/TS 15104:2005

Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods£49.40 members£52.00 non-members

PTI/17

CEN/TS 15105:2005

Solid biofuels. Methods for determination of the water soluble content of chloride, sodium and potassium£49.40 members£52.00 non-members

PTI/17

CEN/TS 15111:2005

Foodstuffs. Determination of trace elements. Determination of iodine in dietetic foods by ICP-MS (inductively coupled plasma mass spectrometry)£49.40 members£52.00 non-members

AW/-/3

CEN/TS 15150:2005

Solid biofuels. Methods for the determination of particle density£49.40 members£52.00 non-members

PTI/17

CEN ISO/TS 21432:2005(ISO/TS 21432:2005)

Non-destructive testing. Standards test method for determining residual stresses by neutron diffraction

WEE/46

CENELEC PUBLICATIONS

EN 50065:-

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz

EN 50065-4-7:2005

Portable low voltage decoupling filters. Safety requirements.£114.00 members£120.00 non-members

PEL/205

EN 50085:-

Cable trunking systems and cable ducting systems for electrical installations

EN 50085-1:2005General requirements


PEL/213

EN 50369:2005

Liquid tight sheathing systems for cable management£87.40 members£92.00 non-members

PEL/213

EN 50388:2005

Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability£100.70 members£106.00 non-members

GEL/9/3

EN 50395:2005

Electrical test methods for low voltage energy cables£49.40 members£52.00 non-members

GEL/20/17

EN 50396:2005

Non electrical test methods for low voltage energy cables£100.70 members£106.00 non-members

GEL/20/17

EN 50402:2005

Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems£121.60 members£128.00 non-members

GEL/31/19

EN 55016:-

Specification for radio disturbance and immunity measuring apparatus and methods

EN 55016-1:-

Radio disturbance and immunity measuring apparatus.

EN 55016-1-1:-(CISPR 16-1-1:2003/A1:2005)Measuring apparatus

AMENDMENT 1:August 2005to EN 55016-1-1:2004

GEL/210/12

EN 55016-2:-

Methods of measurement of disturbance and immunity

EN 55016-2-1:-(CISPR 16-2-1:2003/A1:2005)

Conducted disturbance measurements.AMENDMENT 1:August 2005to EN 55016-2-1:2004

GEL/210/12

EN 55016-2-2:-(CISPR 16-2-2:2003/A2:2005)Measurement of disturbance power

AMENDMENT 2:August 2005to EN 55016-2-2:2004

GEL/210/12

EN 55016-2-3:-(CISPR16-2-3:2003/A1:2005)

Radiated disturbance measurementsAMENDMENT 1:August 2005to EN 55016-2-3:2004

GEL/210/12

EN 55016-2-3:-(CISPR 16-2-3:2003/A2:2005)

Radiated disturbance measurements.AMENDMENT 2:August 2005to EN 55016-2-3:2004

GEL/210/12

EN 60335:-

Household and similar electrical appliances. Safety

EN 60335-2:-Particular requirements

EN 60335-2-15:2002(IEC 60335-2-15:2002)Appliances for heating liquids

CPL/61/07

EN 60335-2-92:2005(IEC 60745-2-92:2005 MODIFIED)

Pedestrian-controlled mains-operated lawn scarifies and aerators.

CPL/61/23

of 69CENELEC PUBLICATIONS

EN 60745:-

Hand-held motor-operated electric tools. Safety

EN 60745-2-19:2005(IEC 60745-2-19:2005 MODIFIED)Particular requirements for jointers

CPL/61/6

EN 60947:-

Low-voltage switchgear and control gear

EN 60947-3:-(IEC 60947-3:1999/A2:2005)

Switches, disconnections, swich-disconnectors and fuse-combination units.AMENDMENT 2:August 2005to EN 60947-3:1999

PEL/17/2

EN 61034:-

Measurement of smoke density of cables burning under defined conditions

EN 61034-1:2005(IEC 61034-1:2005)Test apparatus

GEL/20/18

EN 61034-2:2005(IEC 61034-2:2005)Test procedure and requirements

GEL/20/18

EN 61058:-Switches for appliances

EN 61058-2-4:2005(IEC 61058-2-4:1995+A1:2003)

Particular requirements for independently mounted switches

EPL/23

EN 61788:-Superconductivity

EN 61788-9:2005(IEC 61788-9:2005)

Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors

L/-/90

CENELEC REPORTS

CLC/TR 50448:2005

Guide to levels of competence required in laser safety£49.40 members£52.00 non-members

EPL/76

CLC/TR 50460:2005

Cable networks for television signals, sound signals and interactive services. System guidelines for analogue optical transmission systems£100.70 members£106.00 non-members

EPL/100

CENELEC TECHNICAL SPECIFICATIONSCLC/TS 50217:2005

Guide for in-situ measurements. In-situ measurements of disturbance emission£100.70 members£106.00 non-members

GEL/210/12

HARMONIZATION DOCUMENTSHD 622 S1:-

Power cables having rated voltage from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stationsAMENDMENT 2:August 2005to HD 622 S1:1996

GEL/20/16

HD 60364:-Electrical installations of buildings

HD 60364-7:-

Requirements for special installations or locations

HD 60364-7-712:2005(IEC 60364-7-712:2005)

Solar photovoltaic (PV) power supply systems

JPEL/64

HD 60364-7-715:2005(IEC 60364-7-715 MODIFIED)

Extra-low voltage lighting installations

JPEL/64

ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) EUROPEAN PUBLICATIONSEN 301 893: August 2005(Version 1.3.1)

Broadband radio access networks (BRAN). 5 GHz high performance RLAN. Harmonized EN covering essential requirements of article 3.2 of the R&TTE directivePrice on application

TCT/101

EN 302 842:-

Electromagnetic compatibility and radio spectrum matters (ERM). VHF air-ground and air-air digital link (VDL) mode 4 radio equipment. Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment

EN 302 842-1: August 2005(Version 1.1.1)Physical layer

Price on applicationTCT/101

EN 302 842-2: August 2005(Version 1.1.1)

General description and data link layerPrice on application

TCT/101

EN 302 842-3: August 2005(Version 1.1.1)Additional broadcast aspects


EN 302 842-4: August 2005(Version 1.1.1)Point-to-point functions


OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS

of 69OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS

EG 201 730:-

Access and terminals (AT). Access to the public telecommunications networks. Publication of interface specification under directive 1999/5/EC (R&TTE). Guidelines for the publication of interface specifications

EG 201 730-1: August 2005(Version 2.1.1)General and common aspects


EG 202 373: August 2005(Version 1.1.1)

Electromagnetic compatibility and radio spectrum matters (ERM). Guide to the methods of measurement of radio frequency (RF) fieldsPrice on application

TCT/101

ES 201 468: August 2005(Version 1.3.1)

Electromagnetic compatibility and radio spectrum matters (ERM). Additional electromagnetic compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific applicationsPrice on application

TCT/101

ES 203 021:-

Access and terminals (AT). Harmonized basic attachment requirements for terminals for connection to analogue interfaces of the telephone networks. Update of the technical contents of TBR 021, EN 301 437, TBR 015, TBR 017

ES 203 021-1: August 2005(Version 2.1.1)General aspects


ES 203 021-2: August 2005(Version 2.1.1)

Basic transmission and protection of the network from harmPrice on application

TCT/101

ES 203 021-3: August 2005(Version 2.1.1)

Basic interworking with the public telephone networksPrice on application

TCT/101

ES 282 001: August 2005(Version 1.1.1)

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). NGN functional architecture release 1Price on application

TCT/101

TR 101 362: June 2005(Version 8.4.0)

Digital cellular telecommunications system (phase 2+). Radio network planning aspects (3GPP TR 03.30 version 8.4.0 release 1999)Price on application

TCT/101

TR 102 397:-

Open service access (OSA). Mapping of Parlay X web services to Parlay/OSA APIs

TR 102 397-1: August 2005(Version 1.1.1)Common mapping


TR 102 397-2:-Third party call mapping

TR 102 397-2-1: August 2005(Version 1.1.1)Mapping to generic control


TR 102 397-2-2: August 2005(Version 1.1.1)Mapping to multi-party call control


TR 102 397-3:-Call notification mapping

TR 102 397-3-1: August 2005(Version 1.1.1)Mapping to generic call control


TR 102 397-3-2: August 2005(Version 1.1.1)Mapping to multi-party call control


TR 102 397-6: August 2005(Version 1.1.1)Payment mapping


TR 102 397-7: August 2005(Version 1.1.1)Account management mapping


TR 102 397-8: August 2005(Version 1.1.1)Terminal status mapping


TR 102 397-9:-Terminal location mapping

TR 102 397-9-1: August 2005(Version 1.1.1)Mapping to mobility user location


TR 102 397-9-2: August 2005(Version 1.1.1)

Mapping to mobility user location CAMELPrice on application

TCT/101

TR 102 397-10:-Call handling mapping


Mapping to generic call control and user interactionPrice on application

TCT/101


Mapping to multi-party call control and user interactionPrice on application

TCT/101

TR 102 397-11:-Audio call mapping



Mapping to generic call control and user interactionPrice on application

TCT/101


Mapping to multi-party call control and user interactionPrice on application

TCT/101

TR 102 397-12: August 2005(Version 1.1.1)Multimedia conference mapping


TR 102 397-14:-Presence mapping


Mapping to presence and availability managementPrice on application

TCT/101

TR 102 397-14-2: August 2005(Version 1.1.1)Mapping to SIP/IMS networks


TR 102 415: August 2005(Version 1.1.1)

Human factors (HF). Telecare services. Issues and recommendations for user aspectsPrice on application

TCT/101

TR 102 493: August 2005(Version 1.1.1)

Speech processing, transmission and quality aspects (STQ). Guidelines for the use of video quality algorithms for mobile applicationsPrice on application

TCT/101

TR 123 979: June 2005(Version 6.2.0)

Universal mobile telecommunications system (UMTS). 3GPP enablers for open mobile alliance (OMA) push-to-talk over cellular (PoC) services. Stage 2 (3GPP TR 23.979 version 6.2.0 release 6)Price on application

TCT/101

TR 125 922: May 2005(Version 6.1.0)

Universal mobile telecommunications system (UMTS). Radio resource management strategies (3GPP TR 25.922 version 6.1.0 release 6)Price on application

TCT/101

TR 125 993: June 2005(Version 6.10.0)

Universal mobile telecommunications system (UMTS). Typical examples of radio access bearers (RABs) and radio bearers (RBs) supported by universal terrestrial radio access (UTRA) (3GPP TR 25.993 version 6.10.0 release 6)Price on application

TCT/101

TR 143 030: June 2005(Version 4.1.0)


TCT/101

TR 143 030: June 2005(Version 5.2.0)


TCT/101

TR 143 030: June 2005(Version 6.1.0)


TCT/101

TS 100 812:-

Terrestrial trunked radio (TETRA). Subscriber identity module to mobile equipment (TSIM-ME) interface

TS 100 812-2: August 2005(Version 2.4.1)

Universal integrated circuit card (UICC). Characteristics of the TSIM applicationPrice on application

TCT/101

TS 100 925: July 2005(Version 8.2.1)

Digital cellular telecommunications system (phase 2+). Voice group call service (VGCS). Stage 1 (3GPP TS 02.68 version 8.2.1 release 1999)Price on application

TCT/101

TS 100 926: June 2005(Version 8.2.0)

Digital cellular telecommunications system (phase 2+). Voice broadcast service (VBS). Stage 1 (3GPP TS 02.69 version 8.2.0 release 1999)Price on application

TCT/101

TS 101 671: August 2005(Version 2.12.1)

Lawful interception (LI). Handover interface for the lawful interception of telecommunications trafficPrice on application

TCT/101

TS 101 709: June 2005(Version 8.6.0)

Digital cellular telecommunications system (phase 2+). Link adaptation (3GPP TS 05.09 version 8.6.0 release 1999)Price on application

TCT/101


Smart cards. UICC-terminal interface. Physical and logical characteristics (release 1999)Price on application

TCT/101




TCT/101



TCT/101



TCT/101



TCT/101


Lawful interception (LI). Service-specific details for internet access servicesPrice on application

TCT/101

TS 102 334:-

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Network address book on fixed network

TS 102 334-3: August 2005(Version 1.2.1)

vCard 2.1 profile for contact exchange by SMS/EMS for fixed networkPrice on application

TCT/101


Corporate telecommunication networks (CN). Tunnelling of QSIG over SIPPrice on application

TCT/101


Methods for testing and specification (MTS). Internet protocol testing (IPT). IPv6 testing. Methodology and frameworkPrice on application

TCT/101

TS 102 384: July 2005(Version 6.0.0)

Smart cards. UICC-terminal interface. Card application toolkit (CAT) conformance specification (release 6)Price on application

TCT/101


WS-session. Web services for application session servicesPrice on application

TCT/101

TS 123 002: June 2005(Version 6.8.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Network architecture (3GPP TS 23.002 version 6.8.0 release 6)Price on application

TCT/101

TS 123 060: June 2005(Version 6.9.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). General packet radio service (GPRS). Service description. Stage 2 (3GPP TS 23.060 version 6.9.0 release 6)Price on application

TCT/101

TS 123 107: June 2005(Version 6.3.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Quality of service (QoS) concept and architecture (3GPP TS 23.107 version 6.3.0 release 6)Price on application

TCT/101

TS 123 141: June 2005(Version 6.8.0)

Universal mobile telecommunications system (UMTS). Presence service. Architecture and functional description. Stage 2 (3GPP TS 23.141 version 6.8.0 release 6)Price on application

TCT/101

TS 123 207: June 2005(Version 6.5.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). End-to-end quality of service (QoS) concept and architecture (3GPP TS 23.207 version 6.5.0 release 6)Price on application

TCT/101

TS 123 228: June 2005(Version 6.10.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). IP multimedia subsystem (IMS). Stage 2 (3GPP TS 23.228 version 6.10.0 release 6)Price on application

TCT/101

TS 123 234: June 2005(Version 6.5.0)

Universal mobile telecommunications system (UMTS). 3GPP system to wireless local area network (WLAN) interworking. System description (3GPP TS 23.234 version 6.5.0 release 6)Price on application

TCT/101

TS 123 246: June 2005(Version 6.7.0)

Universal mobile telecommunications system (UMTS). Multimedia broadcast/multicast service (MBMS). Architecture and functional description (3GPP TS 23.246 version 6.7.0 release 6)Price on application

TCT/101


TS 123 251: June 2005(Version 6.4.0)

Universal mobile telecommunications system (UMTS). Network sharing. Architecture and functional description (3GPP TS 23.251 version 6.4.0 release 6)Price on application

TCT/101

TS 123 271: June 2005(Version 6.12.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Functional stage 2 description of location services (LCS) (3GPP TS 23.271 version 6.12.0 release 6)Price on application

TCT/101

TS 125 101: June 2005(Version 6.8.0)

Universal mobile telecommunications system (UMTS). User equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 6.8.0 release 6)Price on application

TCT/101

TS 125 133: June 2005(Version 5.15.0)

Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (FDD) (3GPP TS 25.133 version 5.15.0 release 5)Price on application

TCT/101

TS 125 133: June 2005(Version 6.10.0)

Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (FDD) (3GPP TS 25.133 version 6.10.0 release 6)Price on application

TCT/101

TS 125 141: June 2005(Version 5.10.0)

Universal mobile telecommunications system (UMTS). Base station (BS) conformance testing (FDD) (3GPP TS 25.141 version 5.10.0 release 5)Price on application

TCT/101

TS 125 141: June 2005(Version 6.10.0)

Universal mobile telecommunications system (UMTS). Base station (BS) conformance testing (FDD) (3GPP TS 25.141 version 6.10.0 release 6)Price on application

TCT/101

TS 125 301: June 2005(Version 5.5.0)

Universal mobile telecommunications system (UMTS). Radio interface protocol architecture (3GPP TS 25.301 version 5.5.0 release 5)Price on application

TCT/101

TS 125 301: June 2005(Version 6.3.0)

Universal mobile telecommunications system (UMTS). Radio interface protocol architecture (3GPP TS 25.301 version 6.3.0 release 6)Price on application

TCT/101

TS 125 302: June 2005(Version 5.8.0)

Universal mobile telecommunications system (UMTS). Services provided by the physical layer (3GPP TS 25.302 version 5.8.0 release 5)Price on application

TCT/101

TS 125 302: June 2005(Version 6.4.0)

Universal mobile telecommunications system (UMTS). Services provided by the physical layer (3GPP TS 25.302 version 6.4.0 release 6)Price on application

TCT/101

TS 125 309: June 2005(Version 6.3.0)

Universal mobile telecommunications system (UMTS). FDD enhanced uplink. Overall description. Stage 2 (3GPP TS 25.309 version 6.3.0 release 6)Price on application

TCT/101

TS 125 321: June 2005(Version 5.11.0)

Universal mobile telecommunications system (UMTS). Medium access control (MAC) protocol specification (3GPP TS 25.321 version 5.11.0 release 5)Price on application

TCT/101

TS 125 321: June 2005(Version 6.5.0)

Universal mobile telecommunications system (UMTS). Medium access control (MAC) protocol specification (3GPP TS 25.321 version 6.5.0 release 6)Price on application

TCT/101

TS 125 322: June 2005(Version 5.11.0)

Universal mobile telecommunications system (UMTS). Radio link control (RLC) protocol specification (3GPP TS 25.322 version 5.11.0 release 5)Price on application

TCT/101

TS 125 322: June 2005(Version 6.4.0)

Universal mobile telecommunications system (UMTS). Radio link control (RLC) protocol specification (3GPP TS 25.322 version 6.4.0 release 6)Price on application

TCT/101

TS 125 323: June 2005(Version 5.4.0)

Universal mobile telecommunications system (UMTS). Packet data convergence protocol (PDCP) specification (3GPP TS 25.323 version 5.4.0 release 5)Price on application

TCT/101


TS 125 323: June 2005(Version 6.2.0)

Universal mobile telecommunications system (UMTS). Packet data convergence protocol (PDCP) specification (3GPP TS 25.323 version 6.2.0 release 6)Price on application

TCT/101

TS 125 324: June 2005(Version 6.3.0)

Universal mobile telecommunications system (UMTS). Broadcast/multicast control (BMC) (3GPP TS 25.324 version 6.3.0 release 6)Price on application

TCT/101

TS 125 331: June 2005(Version 5.13.0)

Universal mobile telecommunications system (UMTS). Radio resource control (RRC) protocol specification (3GPP TS 25.331 version 5.13.0 release 5)Price on application

TCT/101

TS 125 331: June 2005(Version 6.6.0)

Universal mobile telecommunications system (UMTS). Radio resource control (RRC) protocol specification (3GPP TS 25.331 version 6.6.0 release 6)Price on application

TCT/101

TS 125 346: June 2005(Version 6.5.0)

Universal mobile telecommunications system (UMTS). Introduction of multimedia broadcast/multicast service (MBMS) in the radio access network (RAN). Stage 2 (3GPP TS 25.346 version 6.5.0 release 6)Price on application

TCT/101

TS 125 423: June 2005(Version 5.14.0)

Universal mobile telecommunications system (UMTS). UTRAN Iur interface radio network subsystem application part (RNSAP) signalling (3GPP TS 25.423 version 5.14.0 release 5)Price on application

TCT/101

TS 125 423: June 2005(Version 6.6.0)

Universal mobile telecommunications system (UMTS). UTRAN Iur interface radio network subsystem application part (RNSAP) signalling (3GPP TS 25.423 version 6.6.0 release 6)Price on application

TCT/101

TS 129 060: June 2005(Version 6.9.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). General packet radio service (GPRS). GPRS tunnelling protocol (GTP) across the Gn and Gp interface (3GPP TS 29.060 version 6.9.0 release 6)Price on application

TCT/101

TS 129 198:-

Universal mobile telecommunications system (UMTS). Open service access (OSA) application programming interface (API)

TS 129 198-4:-Call control

TS 129 198-4-3: July 2005(Version 6.5.1)

Multi-party call control service capability feature (SCF) (3GPP TS 29.198-04-3 version 6.5.1 release 6)Price on application

TCT/101

TS 129 198-5: July 2005(Version 6.4.1)

User interaction service capability feature (SCF) (3GPP TS 29.198-05 version 6.4.1 release 6)Price on application

TCT/101

TS 129 198-13: July 2005(Version 6.3.1)

Policy management service capability feature (SCF) (3GPP TS 29.198-13 version 6.3.1 release 6)Price on application

TCT/101

TS 129 198-15: July 2005(Version 6.2.1)

Multi-media messaging (MM) service capability feature (SCF) (3GPP TS 29.198-15 version 6.2.1 release 6)Price on application

TCT/101

TS 131 121: June 2005(Version 3.13.0)

Universal mobile telecommunications system (UMTS). UICC-terminal interface. Universal subscriber identity module (USIM) application test specification (3GPP TS 31.121 version 3.13.0 release 1999)Price on application

TCT/101

TS 132 305: June 2005(Version 6.0.0)

Universal mobile telecommunications system (UMTS). Telecommunication management. Configuration management (CM). Notification integration reference point (IRP). Extensible markup language (XML) definition (3GPP TS 32.305 version 6.0.0 release 6)Price on application

TCT/101

TS 134 109: June 2005(Version 5.5.0)

Universal mobile telecommunications system (UMTS). Terminal logical test interface. Special conformance testing functions (3GPP TS 34.109 version 5.5.0 release 5)Price on application

TCT/101

TS 134 109: June 2005(Version 6.1.0)

Universal mobile telecommunications system (UMTS). Terminal logical test interface. Special conformance testing functions (3GPP TS 34.109 version 6.1.0 release 6)Price on application

TCT/101


TS 143 055: June 2005(Version 6.10.0)

Digital cellular telecommunications system (phase 2+). Dual transfer mode (DTM). Stage 2 (3GPP TS 43.055 version 6.10.0 release 6)Price on application

TCT/101

TS 143 059: June 2005(Version 6.5.0)

Digital cellular telecommunications system (phase 2+). Functional stage 2 description of location services (LCS) in GERAN (3GPP TS 43.059 version 6.5.0 release 6)Price on application

TCT/101

TS 143 064: June 2005(Version 6.7.0)

Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Overall description of the GPRS radio interface. Stage 2 (3GPP TS 43.064 version 6.7.0 release 6)Price on application

TCT/101

TS 143 129: June 2005(Version 6.3.0)

Digital cellular telecommunications system (phase 2+). Packed-switched handover for GERAN A/Gb mode. Stage 2 (3GPP TS 43.129 version 6.3.0 release 6)Price on application

TCT/101

TS 143 246: June 2005(Version 6.4.0)

Digital cellular telecommunications system (phase 2+). Multimedia broadcast/multicast service (MBMS) in the GERAN. Stage 2 (3GPP TS 43.246 version 6.4.0 release 6)Price on application

TCT/101

TS 143 318: June 2005(Version 6.2.0)

Digital cellular telecommunications system (phase 2+). Generic access to the A/Gb interface. Stage 2 (3GPP TS 43.318 version 6.2.0 release 6)Price on application

TCT/101

TS 144 006: July 2005(Version 6.1.0)

Digital cellular telecommunications system (phase 2+). Mobile station - base stations system (MS-BSS) interface data link (DL) layer specification (3GPP TS 44.006 version 6.1.0 release 6)Price on application

TCT/101

TS 144 014: July 2005(Version 6.3.0)

Digital cellular telecommunications system (phase 2+). Individual equipment type requirements and interworking. Special conformance testing functions (3GPP TS 44.014 version 6.3.0 release 6)Price on application

TCT/101

TS 144 018: July 2005(Version 6.13.0)

Digital cellular telecommunications system (phase 2+). Mobile radio interface layer 3 specification. Radio resource control (RRC) protocol (3GPP TS 44.018 version 6.13.0 release 6)Price on application

TCT/101

TS 144 031: July 2005(Version 5.13.0)

Digital cellular telecommunications system (phase 2+). Location services (LCS). Mobile station (MS) - serving mobile location centre (SMLC) radio resource LCS protocol (RRLP) (3GPP TS 44.031 version 5.13.0 release 5)Price on application

TCT/101

TS 144 031: July 2005(Version 6.8.0)

Digital cellular telecommunications system (phase 2+). Location services (LCS). Mobile station (MS) - serving mobile location centre (SMLC) radio resource LCS protocol (RRLP) (3GPP TS 44.031 version 6.8.0 release 6)Price on application

TCT/101

TS 144 060: July 2005(Version 4.21.0)

Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Mobile station (MS) - base station system (BSS) interface. Radio link control / medium access control (RLC/MAC) protocol (3GPP TS 44.060 version 4.21.0 release 4)Price on application

TCT/101

TS 144 060: July 2005(Version 5.16.0)


TCT/101

TS 144 060: July 2005(Version 6.13.0)


TCT/101

TS 144 318: July 2005(Version 6.1.0)

Digital cellular telecommunications system (phase 2+). Generic access (GA) to the A/Gb interface. Mobile GA interface layer 3 specification (3GPP TS 44.318 version 6.1.0 release 6)Price on application

TCT/101

TS 145 002: June 2005(Version 6.10.0)

Digital cellular telecommunications system (phase 2+). Multiplexing and multiple access on the radio path (3GPP TS 45.002 version 6.10.0 release 6)Price on application

TCT/101


TS 145 005: June 2005(Version 6.10.0)

Digital cellular telecommunications system (phase 2+). Radio transmission and reception (3GPP TS 45.005 version 6.10.0 release 6)Price on application

TCT/101

TS 145 008: June 2005(Version 5.19.0)

Digital cellular telecommunications system (phase 2+). Radio subsystem link control (3GPP TS 45.008 version 5.19.0 release 5)Price on application

TCT/101

TS 145 008: June 2005(Version 6.13.0)

Digital cellular telecommunications system (phase 2+). Radio subsystem link control (3GPP TS 45.008 version 6.13.0 release 6)Price on application

TCT/101

TS 145 009: June 2005(Version 4.3.0)


TCT/101

TS 145 009: June 2005(Version 5.6.0)


TCT/101

TS 145 009: June 2005(Version 6.2.0)


TCT/101

TS 148 008: July 2005(Version 6.10.0)

Digital cellular telecommunications system (phase 2+). Mobile switching centre - base station system (MSC-BSS) interface layer 3 specification (3GPP TS 48.008 version 6.10.0 release 6)Price on application

TCT/101

TS 148 016: July 2005(Version 6.4.0)

Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Base station system (BSS) - serving GPRS support node (SGSN) interface. Network service (3GPP TS 48.016 version 6.4.0 release 6)Price on application

TCT/101

TS 148 018: July 2005(Version 5.12.0)

Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Base station system (BSS) - serving GPRS support node (SGSN). BSS GPRS protocol (3GPP TS 48.018 version 5.12.0 release 5)Price on application

TCT/101

TS 148 018: July 2005(Version 6.9.0)

Digital cellular telecommunications system (phase 2+). General packet radio service (GPRS). Base station system (BSS) - serving GPRS support node (SGSN). BSS GPRS protocol (3GPP TS 48.018 version 6.9.0 release 6)Price on application

TCT/101

TS 148 071: July 2005(Version 6.8.0)

Digital cellular telecommunications system (phase 2+). Location services (LCS). Serving mobile location centre - base station system (SMLC-BSS) interface. Layer 3 specification (3GPP TS 48.071 version 6.8.0 release 6)Price on application

TCT/101

TS 149 031: July 2005(Version 6.5.0)

Digital cellular telecommunications system (phase 2+). Location services (LCS). Base station system application part LCS extension (BSSAP-LE) (3GPP TS 49.031 version 6.5.0 release 6)Price on application

TCT/101

TS 151 010:-

Digital cellular telecommunications system (phase 2+). Mobile station (MS) conformance specification

TS 151 010-1: June 2005(Version 6.3.0)

Conformance specification (3GPP TS 51.010-1 version 6.3.0 release 6)Price on application

TCT/101

TS 151 010-2: June 2005(Version 6.3.0)

Protocol implementation conformance statement (PICS) proforma specification (3GPP TS 51.010-2 version 6.3.0 release 6)Price on application

TCT/101

TS 151 010-5: June 2005(Version 6.3.0)

Inter-radio-access-technology (RAT) (GERAN / UTRAN) interaction abstract test suite (ATS) (3GPP TS 51.010-5 version 6.3.0 release 6)Price on application

TCT/101

TS 151 026: June 2005(Version 6.1.0)

Digital cellular telecommunications system (phase 2+). GSM repeater equipment specification (3GPP TS 51.026 version 6.1.0 release 6)Price on application

TCT/101


Telecommunications and internet converged services and protocols for advanced networking (TISPAN). NGN signalling control protocol. Communication hold (HOLD) PSTN/ISDN simulation servicesPrice on application

TCT/101

ETSI DOCUMENTS ISSUED FOR ONE STEP APPROVAL PROCEDURE (OAP)The following ETSI documents are issued under the One-Step Approval OP20051216.<CR>Comments are welcome and should be addressed to the named contact to arrive by 11 November 2005.

of 69ETSI DOCUMENTS ISSUED FOR ONE STEP APPROVAL PROCEDURE (OAP)

EN 300 812:-

Terrestrial trunked radio (TETRA). Subscriber identity module to mobile equipment (SIM-ME) interface


Integrated circuit (IC). Physical, logical and TSIM application characteristicsContact: Nicolas WoollardEmail: [email protected]: Please order by quoting the reference 05/635089 DC (ETSI)£20.00

TCT/TTR

DRAFT ETSI STANDARDS FOR PUBLIC COMMENTThe following ETSI documents are issued under the Public Enquiry PE20051223.<CR>Comments are welcome and should be addressed to the named contact to arrive by 18 November 2005.EN 302 502: August 2005(Version 1.1.1)

Broadband radio access networks (BRAN). 5,8 GHz fixed broadband data transmitting systems. Harmonized EN covering essential requirements of article 3.2 of the R&TTE directiveContact: Kevin MylanEmail: [email protected]: Please order by quoting the reference 05/635091 DC (ETSI)£20.00

TCT/BRN

The following ETSI documents are issued under the Public Enquiry PE20051230.<CR>Comments are welcome and should be addressed to the named contact to arrive by 25 November 2005.EN 301 357:-

Electromagnetic compatibility and radio spectrum matters (ERM). Cordless audio devices in the range 25 MHz to 2 000 MHz. Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz


Technical characteristics and test methodsContact: Pete MyringEmail: [email protected]: Please order by quoting the reference 05/635093 DC (ETSI)£20.00

TCT/ERM/17


Harmonized EN under article 3.2 of the R&TTE directiveContact: Pete MyringEmail: [email protected]: Please order by quoting the reference 05/635094 DC (ETSI)£20.00

TCT/ERM/17

IEC PUBLICATIONS

IEC 60068:-Environmental testing

IEC 60068-2-30:2005(Edition 3)

Tests. Test Db: Damp heat, cyclic (12h + 12 h cycle)£43.20 members£45.00 non-members

GEL/104

IEC 60519:-Safety in electroheat installations

IEC 60519-10:2005

Particular requirements for electrical resistance trace heating systems for industrial and commercial applications£48.00 members£50.00 non-members

PEL/27

IEC 60740:-

Laminations for transformers and inductors

IEC 60740-1:2005

Mechanical and electrical characteristics£123.20 members£128.33 non-members

EPL/51

IEC 60747:-

Semiconductor devices. Discrete devices

IEC 60747-7-5:2005

Bipolar transistors for power switching applications£80.00 members£83.33 non-members

EPL/47

IEC 61196:-Coaxial communication cables

IEC 61196-1:-Electrical test methods

IEC 61196-1-102:2005

Test for insulation resistance of cable dielectric£19.20 members£20.00 non-members

EPL/46/1

IEC 61196-1-308:2005

Test for tensile strength and elongation for copper-clad metals£19.20 members£20.00 non-members

EPL/46/1

IEC 61196-1-310:2005

Test for torsion characteristics of copper-clad metals£19.20 members£20.00 non-members

EPL/46/1

IEC 61300:-

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures

IEC 61300-2:-Tests

IEC 61300-2-12:2005(Edition 2)Impact


GEL/86/2

IEC 61300-2-18:2005(Edition 2)

Dry heat. High temperature endurance£27.20 members£28.33 non-members

GEL/86/2

IEC 62328:-

Multimedia home server systems. Interchangeable volume/file structure adaptation for broadcasting receivers

of 69IEC PUBLICATIONS

IEC 62328-2:2005General recording structure


EPL/100

IEC 62328-3:2005

Broadcasting system specific recording structure. ISDB£123.20 members£128.33 non-members

EPL/100

IEC/PAS PUBLICATIONS

IEC/PAS 62405:2005

Real-time ethernet Vnet/IP specification£193.60 members£201.67 non-members

AMT/7

IEC/PAS 62407:2005

Real-time ethernet control automation technology (EtherCAT)£208.00 members£216.67 non-members

AMT/7

IEC/PAS 62408:2005Real-time ethernet powerlink (EPL)


AMT/7

IEC/PAS 62409:2005

Real-time ethernet for plant automation (EPA)£203.20 members£211.67 non-members

AMT/7

IEC/PAS 62411:2005Real-time ethernet PROFINET IO


AMT/7

IEC/PAS 62431:2005

Measurement methods for reflectivity of electromagnetic absorbers in millimetre wave frequency range£108.80 members£113.33 non-members

EPL/46/2

ISO PUBLICATIONS

ISO 37:2005(Edition 4)

Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties£78.40 members£81.67 non-members

PRI/22Will be implemented as an identical British Standard

ISO 179:-

Plastics . Determination of Charpy impact properties

ISO 179-1:-Non-instrumented impact test

AMENDMENT 1:July 2005to ISO 179-1:2000



ISO 185:2005(Edition 2)Grey cast iron. Classification


ISE/35Will be implemented as an identical British Standard

ISO 1920:-Testing of concrete

ISO 1920-4:2005Strength of hardened concrete


B/517/1Will not be implemented as a British Standard

ISO 3033:-Oil of spearmint

ISO 3033-1:2005Native type (Mentha spicata L)


AW/54Will be implemented as an identical British Standard

ISO 3033-2:2005

Chinese types (80% and 60%)(Mentha viridis L. var. crispa Benth.) redistilled oil£48.00 members£50.00 non-members


ISO 3033-3:2005

Indian type (Mentha spicata L.), redistilled oil£41.60 members£43.33 non-members


ISO 3033-4:2005

Scotch variety (Mentha X gracilis Sole)£35.20 members£36.67 non-members


ISO/TS 3567:2005

Vacuum gauges. Calibration by direct comparison with a reference gauge£59.20 members£61.67 non-members

MCE/8Will be implemented as an identical British Standard

ISO 4254:-Agricultural machinery. Safety

ISO 4254-1:2005(Edition 3)General requirements


AGE/6Will be implemented as an identical British Standard

ISO 4306:-Cranes. Vocabulary

ISO 4306-5:2005Bridge and gantry cranes


MHE/3/3Will not be implemented as a British Standard

of 69ISO PUBLICATIONS


Earth-moving machinery. Operator's manual. Content and format£56.00 members£58.33 non-members

B/513/1Will be implemented as an identical British Standard

ISO 6753:-

Tools for pressing and moulding. Machined plates

ISO 6753-1:2005(Edition 2)Machines plates for press tools


MTE/12Will be implemented as an identical British Standard

ISO 7225:2005(Edition 2)Gas cylinders. Precautionary labels


PVE/3/7Will be implemented as an identical British Standard


Ski-poles for alpine skiing. Requirements and test methods£64.00 members£66.67 non-members

SW/136Will be implemented as an identical British Standard

ISO 8267:-

Aircraft. Interface requirements for tow bar attachment requirements

ISO 8267-1:2005Main line aircraft


ACE/57Will be implemented as an identical British Standard

ISO 8267-2:2005Regional aircraft


ACE/57Will be implemented as an identical British Standard

ISO 8528:-

Reciprocating internal combustion engine driven alternating current generating sets

ISO 8528-5:2005(Edition 2)Generating sets


MCE/14/-/8Will be implemented as an identical British Standard

ISO/IEC 8802:-

Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements

ISO/IEC 8802-11:2005(Edition 2)

Wireless LAN medium access control (MAC) and physical layer (PHY) specifications£257.60 members£268.33 non-members

IST/6Will not be implemented as a British Standard. Is approved as suitable for use in the UK

ISO 8871:-

Elastomeric parts for parenterals and for devices for pharmaceutical use

ISO 8871-2:-Identification and characterization



CH/212Will not be implemented as a British Standard

ISO 8871-5:2005

Functional requirements and testing£48.00 members£50.00 non-members

CH/212Will not be implemented as a British Standard

ISO 8980:-

Ophthalmic optics. Uncut finished spectacle lenses

ISO 8980-5:2005

Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant£41.60 members£43.33 non-members

CH/172/3Will be implemented as an identical British Standard


Rubber and rubber products. Determination of precision for test method standards.£129.60 members£135.00 non-members


ISO 9276:-

Representation of results of particle size analysis

ISO 9276-5:2005

Methods of calculations relating to particle size analyses using logarithmic normal probability distribution.£51.20 members£53.33 non-members

LBI/37Will be implemented as an identical British Standard


Measurement of gas flow by means of critical flow Venturi nozzles£96.00 members£100.00 non-members

CPI/30/2Will be implemented as an identical British Standard

ISO 9311:-

Adhesives for thermoplastic piping systems

ISO 9311-1:2005Determination of film properties



ISO/IEC 9798:-

Information technology. Security techniques. Entity authentication


ISO/IEC 9798-6:2005

Mechanisms using manual data transfer£68.80 members£71.67 non-members

IST/33Will be implemented as an identical British Standard

ISO 9802:-Raw optical glass. Vocabulary

CORRIGENDUM 1:August 2005to ISO 9802:1996

CPW/172

ISO/IEC 9834:-

Information technology. Open systems interconnection. Procedures for operation of OSI registration authorities

ISO/IEC 9834-1:2005(Edition 2)

General procedures and top arcs of the ASN.1 object identifier tree£73.60 members£76.67 non-members


ISO/IEC 9834-8:2005

Generation and registration of universally unique identifiers (UUIDs) and their use as ASN.1 object identifier components£78.40 members£81.67 non-members


ISO 9927:-Cranes. Inspections

ISO 9927-3:2005Tower cranes


MHE/3Will be implemented as an identical British Standard

ISO/TS 9941:2005(Edition 2)

Milk and canned evaporated milk. Determination of tin content. Spectrometric method£35.20 members£36.67 non-members

AW/5Will not be implemented as a British Standard

ISO 10071:-

Tools for pressing. Ball-lock punches

ISO 10071-2:2005Ball-lock punches for heavy duty


MTE/12Will be implemented as an identical British Standard

ISO/IEC 10179:-

Information technology. Processing languages. Document style semantics and specification language (DSSSL). Amendment 2: Extensions to multilingual and complicated document stylesAMENDMENT 2:July 2005to ISO/IEC 10179:1996



ISO 11114:-

Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents

ISO 11114-4:2005

Test methods for selecting metallic materials resistant to hydrogen embrittlement£59.20 members£61.67 non-members


ISO 12468:-External exposure of roofs to fire

ISO 12468-2:2005Classification of roofs


FSH/22Will be implemented as an identical British Standard


Metallic materials. Determination of plane-strain fracture toughness£64.00 members£66.67 non-members

ISE/NFE/4/4Will be implemented as an identical British Standard

ISO 13373:-

Condition monitoring and diagnostics of machines. Vibration condition monitoring

ISO 13373-2:2005

Processing, analysis and presentation of vibration data£86.40 members£90.00 non-members

GME/21Will not be implemented as a British Standard

ISO/IEC 13818:-

Information technology. Generic coding of moving pictures and of moving pictures and associated audio information

ISO/IEC 13818-4:-

Conformance testing. Amendment 2: System target decoder modelAMENDMENT 2:July 2005to ISO/IEC 13818-4:2004


IST/37

ISO 14428:2004

Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Determination of expansion/shrinkage during baking£35.20 members£36.67 non-members

CII/24Will be implemented as an identical British Standard

ISO/IEC 14496:-

Information technology. Coding of audio-visual objects

ISO/IEC 14496-4:-Conformance testing

CORRIGENDUM 1:August 2005to ISO/IEC 14496-4:2004/Amd 1:2005

IST/37


ISO 14617:-Graphical symbols for diagrams

ISO 14617-1:2005(Edition 2)General information and indexes


TDW/4Will be implemented as an identical British Standard

ISO/IEC 14709:-

Information technology. Configuration of customer premises cabling (CPC) for applications

ISO/IEC 14709-2:-

Integrated services digital network (ISDN) primary rateAMENDMENT 1:July 2005to ISO/IEC 14709-2:1998


TCT/7Will be implemented as an identical British Standard

ISO/IEC 14776:-

Information technology. Small computer system interface (SCSI)

ISO/IEC 14776-452:2005SCSI primary commands-2 (SPC-2)


ISTIECCT/-Will not be implemented as a British Standard

ISO 14819:-

Traffic and travel information (TTI). TTI messages via traffic message coding

ISO 14819-3:2005Location referencing for ALERT-C


EPL/278Will be implemented as an identical British Standard

ISO 14880:-

Optics and photonics. Microlens arrays

ISO 14880-1:-Vocabulary

CORRIGENDUM 2:August 2005to ISO 14880-1:2001

CPW/172

ISO 15310:1999

Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method£51.20 members£53.33 non-members


ISO 15676:2005

Cardiovascular implants and artificial organs. Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)£41.60 members£43.33 non-members


ISO 15704:-

Industrial automation systems. Requirements for enterprise-reference architectures and methodologiesAMENDMENT 1:August 2005to ISO 15704:2000


AMT/5Will be implemented as an identical British Standard

ISO 15927:-

Hygrothermal performance of buildings. Calculation and presentation of climatic data

ISO 15927-4:2005

Hourly data for assessing the annual energy use for heating and cooling£35.20 members£36.67 non-members

B/540Will be implemented as a related British Standard

ISO 16121:-

Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses

ISO 16121-4:2005Cabin environment


AUE/12Will be implemented as an identical British Standard

ISO 16468:2005

Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements£56.00 members£58.33 non-members

ISE/6Will be implemented as an identical British Standard

ISO 17201:-

Acoustics. Noise from shooting ranges

ISO 17201-1:2005

Determination of muzzle blast by measurement£100.80 members£105.00 non-members

EH/1/3Will be implemented as an identical British Standard

ISO 17228:2005

Leather. Tests for colour fastness. Change in colour with accelerated ageing£41.60 members£43.33 non-members

TCI/69Will not be implemented as a British Standard

ISO 17864:2005

Corrosion of metals and alloys. Determination of the critical pitting temperature under potentiostatic control£56.00 members£58.33 non-members

ISE/NFE/8Will be implemented as an identical British Standard

ISO/IEC 18013:-

Information technology. Personal identification. ISO compliant driving licence


ISO/IEC 18013-1:2005

Physical characteristics and basic data set£129.60 members£135.00 non-members


ISO 18116:2005

Surface chemical analysis. Guidelines for preparation and mounting of specimens for analysis£59.20 members£61.67 non-members

CII/60Will not be implemented as a British Standard

ISO 19118:2005Geographic information. Encoding



ISO 19879:2005

Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections£68.80 members£71.67 non-members

MCE/18/-/4Will be implemented as an identical British Standard

ISO 19980:2005

Ophthalmic instruments. Corneal topography£78.40 members£81.67 non-members


ISO 20401:-

Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mmCORRIGENDUM 1:August 2005to ISO 20401:2005

MCE/18/-/5

ISO 20433:2005

Leather. Tests for colour fastness. Colour fastness to crocking£35.20 members£36.67 non-members

TCI/69Will not be implemented as a British Standard

ISO 20502:2005

Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of adhesion of ceramic coatings by scratch testing£86.40 members£90.00 non-members

RPI/13Will not be implemented as a British Standard

ISO/TS 20836:2005

Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Performance testing of thermal cyclers£56.00 members£58.33 non-members

AW/-/3Will be implemented as an identical British Standard

ISO 21007:-

Gas cylinders. Identification and marking using radio frequency identification technology

ISO 21007-1:2005

Reference architecture and terminology£51.20 members£53.33 non-members


ISO 21007-2:2005

Numbering schemes for radio frequency identification£100.80 members£105.00 non-members


ISO/TS 21432:2005

Non-destructive testing. Standard test method for determining residual stress by neutron diffraction£96.00 members£100.00 non-members

WEE/46Will be implemented as an identical British Standard

ISO 21968:2005

Non-magnetic metallic coatings on metallic and non-metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy current method£51.20 members£53.33 non-members

STI/33Will be implemented as an identical British Standard

ISO 22498:2005

Plastics. Vinyl chloride homopolymer and copolymer resins particle size determination by mechanical sieving£35.20 members£36.67 non-members


ISO 22664:2005

Space data and information transfer systems. TC (telecommand) space data link protocol£147.20 members£153.33 non-members

ACE/68/-/7Will be implemented as an identical British Standard

ISO 22666:2005

Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocol£137.60 members£143.33 non-members



ISO 22667:2005

Space data and information transfer systems. Communications operations procedure 1£129.60 members£135.00 non-members


ISO 22977:2005

Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing£41.60 members£43.33 non-members

MCE/9Will be implemented as an identical British Standard

ISO 23539:2005

Photometry. The CIE system of physical photometry£68.80 members£71.67 non-members

CPL/34/5Will be implemented as an identical British Standard

ISO/IEC TR 24746:2005

Information technology. Generic cabling for customer premises mid-span DTE power insertion.£16.00 members£16.67 non-members

ISTIECCT/-Will not be implemented as a British Standard

ISO/IEC 25000:2005

Software engineering. Software product quality requirements and evaluation (SQuaRE). Guide to SQuaRE£100.80 members£105.00 non-members


ISO 25539:-

Cardiovascular implants. Endovascular devices

ISO 25539-1:-Test methods




ISO/IEC 80416:-

Basic principles for graphical symbols for use on equipment

ISO/IEC 80416-4:2005

Supplementary guidelines for the adaptation of graphical symbols for use on screens and displays (icons)£68.80 members£71.67 non-members

PH/8/3Will be implemented as an identical British Standard

ISO 82045:-Document management

ISO 82045-5:2005

Application of metadata for the construction and facility management sector£51.20 members£53.33 non-members

B/555Will be implemented as an identical British Standard


index

Documents

Transcript of index