Incubation Services Brochure - Startseite · Design Thinking Workshop – facilitated by Dr. Moritz...

IGTR is Launching its Incubation Services3-Days Start-up Bootcamp @ Indo-German Tool Room (IGTR), Aurangabad

26-28 April 2017

Start-up Bootcamp

Technology Start-ups (Hardware & Software), Final Year Students with

Entrepreneurial Spirit, Existing Enterprises

The Programme

Target Group:

Technology has changed our lives drastically.

Tablets, mobile phones, social platforms are

results of revolutionary innovations developed by

visionary innovators, some of them from start-ups

who have grown to multinational companies such

as Facebook. Incubators play an important role for

start-ups to support their growth, provide advisory

as well as access to technologies, mentors,

investors, etc. Aurangabad has been a striving

industry hub, especially for the auto-component

sector, with approx. 1220-1500 SMEs, excellent

colleges as well as few OEMs such as Bajaj Auto,

SKODA, etc.; thus providing high potential for

new start-ups.

Given the importance of start-ups for industrial

and economic growth, Indo-German Tool Room is

launching its incubation services with a 3-day

Start-up bootcamp. If you already have an idea in

the technology domain or if you are working on

your venture or are looking to diversify your

product / business model, join the bootcamp to

refine your idea with the help of tools such as

design thinking and business modeling.

International and national experts will evaluate

your product and your business model and will

give you valuable inputs.

If you do not have an idea yet, but the

entrepreneurial spirit to found your own venture,

Background:

industrial leaders will present their challenges on

the first day which you could take up to develop

your own idea/venture or to gain practical

experience of solving real industrial problems.

Some of the project ideas given by the industry are

described in this brochure. You can choose one of

them to apply for the bootcamp. The bootcamp

will help you to do your first steps and to think

strategically about your idea with the help of the

design thinking and business modeling method.

The participants of the bootcamp will have access

to IGTR's state of-the-art facilities including

sophisticated machines such as CNC Milling,

EDM & Wire Cut machines, 3D scanning and

printing as well as access to its experts in areas

such as Design, Enterprise Development, Project

Management, etc.

The best idea/venture will also get the chance to

further work on their idea/venture with support of

industry leaders and IGTR!

Apply now! Last date to submit your application is

the 5th April 2017. Participation in Design

Thinking and Business Modelling workshop is

limited to a maximum of 20 participants.

For further information, contact

[email protected]!

Agenda

10:00 – 11:00 Opening Session: Start up and Enterprise Development Ecosystem

Participation open for all (industry, students, institutions) pre- registered delegates

Participation for pre-selected applicants to work on their ideas. Max 20 delegates

11:00 – 11:30

14:30 – 17:00

Coffee Break

Design Thinking Workshop – facilitated by Dr. Moritz Gekeler, Strategic Consultant, Coach and Facilitator for Creative Collaboration and Design Thinking, CEO, Dolaborate GmbH

Design Thinking is a method which is used for practical and creative resolution of problems as well as creation of solutions. Design thinking is often used to support entrepreneurs to identify the right business model for their innovation. The workshop will provide you with an opportunity to flesh out your idea. If you already have a business model, the design thinking tools will help you to further elaborate your concept and come up with new ideas.

Lunch13:30 – 14:30

09:00 – 13:00 Continuation of Design Thinking Workshop Participation open for all (industry, students, institutions) pre- registered delegates

13:00 – 14:00

14:00 – 17:00

Business Modeling Workshop – facilitated by Manohar Esarapu, Head Corporate Venture Programme, Digital Enterprise, Partner - Business Services, Consumer Products, Bosch

The workshop will provide you an overview on how to develop a successful business model based on your idea using tools such as the business model canvas, etc. If you already have a business model, it will help you to identify gaps and opportunities. The workshop has been designed to enhance your understanding of the business type, how to evaluate key activities, resources and partnerships in this context, etc.

11:30 – 13:30 Reverse Pitch

Local Industry leaders will pitch their problems to budding entrepreneurs, start-ups and final year students. These can concern production, process, operational, quality issues; problems with regard to their products or just simple issues concerning their business model.

09:00 – 13:00 Continuation of Business Modeling Workshop Participation

open for all

(industry,

students,

institutions) pre-

registered

delegates

13:00 – 14:00

14:00 – 16:00

Pitch Event

Pitch your ideas (refined during the design thinking and business

modelling workshop) to industry leaders. The winner will get the

chance to further work on their idea with support of Industry

leaders and IGTR.

Technology Start-ups (Hardware & Software), Final Year Students with

Entrepreneurial Spirit, Existing Enterprises

The Programme

Target Group:

Technology has changed our lives drastically.

Tablets, mobile phones, social platforms are

results of revolutionary innovations developed by

visionary innovators, some of them from start-ups

who have grown to multinational companies such

as Facebook. Incubators play an important role for

start-ups to support their growth, provide advisory

as well as access to technologies, mentors,

investors, etc. Aurangabad has been a striving

industry hub, especially for the auto-component

sector, with approx. 1220-1500 SMEs, excellent

colleges as well as few OEMs such as Bajaj Auto,

SKODA, etc.; thus providing high potential for

new start-ups.

Given the importance of start-ups for industrial

and economic growth, Indo-German Tool Room is

launching its incubation services with a 3-day

Start-up bootcamp. If you already have an idea in

the technology domain or if you are working on

your venture or are looking to diversify your

product / business model, join the bootcamp to

refine your idea with the help of tools such as

design thinking and business modeling.

International and national experts will evaluate

your product and your business model and will

give you valuable inputs.

If you do not have an idea yet, but the

entrepreneurial spirit to found your own venture,

Background:

industrial leaders will present their challenges on

the first day which you could take up to develop

your own idea/venture or to gain practical

experience of solving real industrial problems.

Some of the project ideas given by the industry are

described in this brochure. You can choose one of

them to apply for the bootcamp. The bootcamp

will help you to do your first steps and to think

strategically about your idea with the help of the

design thinking and business modeling method.

The participants of the bootcamp will have access

to IGTR's state of-the-art facilities including

sophisticated machines such as CNC Milling,

EDM & Wire Cut machines, 3D scanning and

printing as well as access to its experts in areas

such as Design, Enterprise Development, Project

Management, etc.

The best idea/venture will also get the chance to

further work on their idea/venture with support of

industry leaders and IGTR!

Apply now! Last date to submit your application is

the 5th April 2017. Participation in Design

Thinking and Business Modelling workshop is

limited to a maximum of 20 participants.

For further information, contact

[email protected]!

Agenda

10:00 – 11:00 Opening Session: Start up and Enterprise Development Ecosystem

Participation open for all (industry, students, institutions) pre- registered delegates

Participation for pre-selected applicants to work on their ideas. Max 20 delegates

11:00 – 11:30

14:30 – 17:00

Coffee Break

Design Thinking Workshop – facilitated by Dr. Moritz Gekeler, Strategic Consultant, Coach and Facilitator for Creative Collaboration and Design Thinking, CEO, Dolaborate GmbH

Design Thinking is a method which is used for practical and creative resolution of problems as well as creation of solutions. Design thinking is often used to support entrepreneurs to identify the right business model for their innovation. The workshop will provide you with an opportunity to flesh out your idea. If you already have a business model, the design thinking tools will help you to further elaborate your concept and come up with new ideas.

Lunch13:30 – 14:30

09:00 – 13:00 Continuation of Design Thinking Workshop Participation open for all (industry, students, institutions) pre- registered delegates

13:00 – 14:00

14:00 – 17:00

Business Modeling Workshop – facilitated by Manohar Esarapu, Head Corporate Venture Programme, Digital Enterprise, Partner - Business Services, Consumer Products, Bosch

The workshop will provide you an overview on how to develop a successful business model based on your idea using tools such as the business model canvas, etc. If you already have a business model, it will help you to identify gaps and opportunities. The workshop has been designed to enhance your understanding of the business type, how to evaluate key activities, resources and partnerships in this context, etc.

11:30 – 13:30 Reverse Pitch

Local Industry leaders will pitch their problems to budding entrepreneurs, start-ups and final year students. These can concern production, process, operational, quality issues; problems with regard to their products or just simple issues concerning their business model.

09:00 – 13:00 Continuation of Business Modeling Workshop Participation

open for all

(industry,

students,

institutions) pre-

registered

delegates

13:00 – 14:00

14:00 – 16:00

Pitch Event

Pitch your ideas (refined during the design thinking and business

modelling workshop) to industry leaders. The winner will get the

chance to further work on their idea with support of Industry

leaders and IGTR.

Project Ideas

If you already have an idea /working on your project, please

let us know more details about your idea in the registration

form. If you do not already have your own venture idea, please

indicate in the application form which of the following project

ideas you would like to further explore during the bootcamp

and consequently work on. The project ideas will be pitched in

full to you during the reverse pitch. Please regularly check the

following link as we will update more project ideas collected

from industry leaders:

https://www.facebook.com/AurangabadInnovationNetwork/

The company is producing sheet metal and fabrication parts for the automobile sectors. Their fabrication processes include blanking, piercing, forming by using the latest progressive tooling and machines. The company is using 80 to 700 tonnage presses.

Major rejection in sheet metal parts is happening because of dents/scratches and other visual defects. In almost all sheet metal industries, a lot of resources are spent on visual inspection of parts at the final inspection table. In order decrease visual inspection and thus avoid quality issues, the company is looking for someone who could develop an automatic camera system which is able to check all the parts visually in an auto mode. The system shall be able to catch burrs, scratch marks and dents on the surface and reject parts that do not comply with the quality standards of the company.

Design and development of automatic visual inspection system for sheet metal parts like magnet case, etc.

The company is primarily operating into sheet rolling and slitting. As per the requirement of the industry, sheet is rolled in various sizes (thickness and width) by using rolling mills. The company is having two rolling mills and is producing different sizes of sheet for many sheet metal industries.

Before sending the metal strip though a rolling mill, it has to be cleaned. For the cleaning purpose it is passing through a horizontal chamber filled with an acidic cleaning agent. This acidic cleaning agent is circulated through a heat exchanger as the acid has to be heated to a temperature of around 60 degree to properly function. The company is currently running an outside heat exchanger for the heating, however, this solution is very costly as they generate the heat by creating steam in a boiler which is then passed through heat exchanger with the help of a motor. The company is therefore looking for someone who could develop a cheaper method to heat up the acidic solution. This can be achieved by designing and developing a heater which can be placed directly in the acid tank.

Design and development of a heater which can heat the acidic cleaning agent solution tank

The company is also producing different types of brackets which have multiple holes in it. As per design requirement of the customer these holes should not have any presence of burr/chips. However, due to limitations in the punching process small projections are being generated. To remove these projections or burrs from the bracket holes, the company is having ten manual machines to remove the burrs from the holes one by one. This operation is very time and resource consuming as multiple machines with operators have to run at the same time to meet the production requirements for these burr free parts. The company is therefore looking for someone who could design and develop an automatic multi chamfering tool/machine.

Design and development of automatic multi chamfering tool/machine

The company is manufacturing clutches and other 2&3 wheeler sheet metal parts for companies such as Bajaj Auto, Endurance and many more customers. These parts are produced by integrating stamping, punching, forming and blanking processes which are carried out on multiple presses.

Generally, the parts loading and unloading on the sheet metal presses are done manually which sometimes results in injuries to the operator's hand. Due to manual loading and unloading, the overall productivity is decreased. In all developed nations, this material transfer and loading/unloading of parts are done by robots which are however too costly for Indian SMEs. The company is therefore looking for someone who could design and develop a low cost solution for automatic loading and unloading of parts as well as for material transfer from one press to another.

Design and development of a low cost solution for automatic loading and unloading of parts during multiple processes on different presses

The company is a transformer manufacturing company. It manufactures different types and sizes of transformers, starting from design of the transformer component to the assembly and testing. The testing of the transformer is done by 'Set on Site Electricals' itself.

Currently, all the transformer components design calculation is done manually. On the basis of input and output parameters, coil size, number of turns of wire, wire diameters and other parameters calculation is done manually. The company is therefore looking for someone who could develop a software which after entering input and output parameters is calculating all major components design automatically. The calculation algorithms can be developed by analyzing the manual calculation method. The software would help 'Set on Site Electricals' to design error proof components which would lead to a decrease in rejection and rework substantially.

Development of a software for transformer components design calculation