1

The MultiCam V-Series Plasma is designed for companies looking for maximum value in a CNC plasma machine. It is ideal for the entry level manufacturer or anyone on a budget. Capable of cutting mild steel, stainless steel, aluminum and brass, the V-Series plasma is offered in a variety of popular table formats and comes standard with Hypertherm plasma cutting torch technology. The CNC control system is extraordinarily easy-to-use and because it is a MultiCam, the V-Series Plasma also comes with the full support of the MultiCam Technology Center network. With over 70 locations worldwide, sales, service, support and training are always located nearby.

MultiCam, Inc. 1025 West Royal LaneDFW Airport, Texas 75261972.929.4070 • fax 972.929.4071www.multicam.com • sales@multicam.com

All specifications subject to change. © 2010 MultiCam, Inc. All Rights Reserved.

Features & Specifications Guide for MultiCam V-Series CNC Plasma

Incredible Value and Performance!

Innovation. Quality. Performance.

2

The MultiCam V-Series Plasma offers a wide variety of standard features:

MultiCam 2545 EZ Control - 4 axis Motion •Control System complete with EZ Suite application softwareMultiCam EZ G Code™ programming software•Standard Ethernet or RS232 direct connections•Custom engineered extruded aluminum frame •with steel leg supports for high strength and rigidity.Automatic Torch Height (ATH)•Powerful dual X-axis digital high-speed •drive motorsIntergral V Cam roller bearings for maximum •stiffness and contamination resistanceHypertherm PowerMax™ plasma torches•

Hand Held Operator Interface

All MultiCam V-Series Plasma systems come standard with MultiCam’s easy-to-use Hand Held Operator Interface featuring graphic icons for all machine functions. With a few minutes of training any employee can operate a MultiCam V-Series Plasma.

Standard Working Surface

The standard work surface is constructed using mild steel to form a level, slat table. The slats are 50mm on center to provide maximum support and highvolumeairflow.TheV-Seriesdowndrafttablecomes with a high volume fume extraction plenum and 12” diameter outlet.

Base Frame The legs are welded steel assemblies with heavy structural channel cross members. The stringers are fabricated from heavy-duty aerospace grade aluminum with precision machined bearing datums. The base features an integrated dross pan/fume extraction plenum and reinforced steel leg supports.

V-Series Plasma Specifications

3

V-Series Plasma Specifications

Gantry

The Gantry is custom engineered and precision machined for maximum stiffness using high quality aluminum extrusion. The extrusion’s heavy wall thickness and 120mm x 145mm rectangular structure combine to make the gantry extremely rigid.

Gantry Supports

Cast aluminum gantry supports are used to house X-axis drive motors and bearings. The supports are machined on a four axis horizontal machining center to ensure that they are parallel and perpendicular. Castings provide extremely stable support for the gantry.

Bearings

Self-contained integral V Cam roller bearings are used on all axes. This technology is ideal for plasma systems because the bearings themselves are isolated from the environment while the rolling contact between the wheel and track sweeps debris aside.

Drive Motor System

The 2-phase digital, brushless, synchronous electric motors Multicam has selected for the V-Series Plasma have undergone extensive testing. The inductance and resistance of the windings are optimized for system smoothness. The integrated digital motor drives have also been optimized to runthesemotorsefficiently.

4

V-Series Plasma Specifications

Drive Transmission Assembly

The X axis drive transmissions are manufactured using an aluminum casting and feature steel cable reinforced urethane belt-drives. The output pinions are supported by a dual bearing arbor with wide bearing separation for optimum stiffness.

Plasma Torches

MultiCam V-Series Plasma systems exclusively use Hypertherm PowerMax torches. PowerMax 65, 85 & 1650 torches provide wide cutting capacity on metals including aluminum and mild steel. Ask your MultiCam representative for additional details and capabilities of the Hypertherm PowerMax torches.

Automatic Torch Height (ATH) Control

Automatic Torch Height is standard on all V-Series plasma systems. Most competitive ATH systems are limited as they are independent of the motion control system and rely on a set of average parameters to control the torch height. MultiCam systems are fully integrated with the control and torch height is automatically adjusted based on the current cutting parameters. This allows the system to be extremely responsive when cutting a wide variety of metals.

Plate Rider Option

MultiCam’s optional plate rider with integrated ball bearings attaches to the Automatic Torch Height assembly and is ideal for cutting thin gauge sheet metal.

5

V-Series Plasma Specifications

Standard Features

Leveling Feet

Operation Manual

Tool Box

Electrical Schematics

6

Size Chart (metric)

Size Chart (inches)

V Series Plasma Specs (inches)

• Z-Axis Clearance: 2.6”• Z-Axis Travel: 3.5"• Repeatability: +/- .001"• Cutting Speed: 800 ipm• Rapid Traverse: 1200 ipm• Drive System X, Y, and Z axis: Rack and Pinion• Standard Work Surface: Steel slat

V Series Plasma Specs (metric)

• Z-Axis Clearance: 66.0 mm• Z-Axis Travel: 88.9 mm• Repeatability: +/- .0254 mm• Cutting Speed: 20.3 M/min• Rapid Traverse: 30.5 M/min• Drive System X, Y, and Z axis: Rack and Pinion• Standard Work Surface: Steel slat

MODEL L W HWORKING

AREA

1-103P1-101P

125149149

7082

102

53 50 x 10075 70 53 50 x 50

60 x 12080 x 120

5353

1-204P1-304P

MODEL L W HWORKING

AREA

1-103P1-101P

317537853785

177820832591

1346 1270 x 25401905 1778 1346 1270 x 1270

1524 x 30482133 x 3048

13461346

1-204P1-304P

H a n d H e l d a n d m e c H a n i z e d p l a s m a s y s t e m s f o r c u t t i n g a n d g o u g i n g m e t a l

Powermax Selection Guide®

8

powermax product lineHigh-performance industrial products for every cutting and gouging need.

Hypertherm’sPowermaxlineofproductsconsistsoffivesystemsthatwillhelpyougetyourcuttingandgougingjobsdonefaster,easier,morereliablyandatlowercost.

Forpartnumbersrefertoproductbrochuresorvisitwww.hypertherm.com/powermax

Don’tletthesmallsizefoolyou.ThePowermax30doestheworkofsystemstwiceitssizeandweight.Itefficientlycuts1/4"(6mm)metal.Includesashoulderstrapforincreasedportability.

Handheld cut capacity

Recommended� 1/4"�(6�mm) at�20�ipm�(500�mm/min)3/8"�(10�mm) at�10�ipm�(250�mm/min)

Severance� 1/2"�(12�mm) at�5�ipm�(125�mm/min)

Ourbestsellingsystem,thePowermax45isthemostversatileandportable1/2"(12mm)machineonthemarket,withabroadsetofapplicationcapabilitiesthatmakeitatrulymulti-purposetool.ThePowermax45cutsorgougesfaster,easierandbetterthananyotherproductinitsclass.

Handheld cut capacity

Recommended 1/2"�(12�mm) at�20�ipm�(500�mm/min)3/4"�(19�mm) at�10�ipm�(250�mm/min)

Severance 1"�(25�mm) at�5�ipm�(125�mm/min)

mechanized pierce capacity3/8"�(10�mm)

T30v�hand�torch

T45m�machine�torch

T45v�hand�torch

Capacityratings

Thereisnoindustrystandardforratingplasmasystems,soitisimportanttotakecarewhencomparingproductsfromdifferentmanufacturers.

HandheldcutcapacityRecommended–Thethicknessofmildsteelonwhichthesystemdeliversgoodcutqualityandspeedsatorgreaterthan20"(500mm)perminute.Eightypercentormoreofcuttingshouldbeattherecommendedthickness.

Severance–Thethicknessofmildsteelthatcanbereasonablyseveredataminimumof5ipm(125 mm)butwithpoorcutquality.Cuttingtheseverancethicknessshouldbeinfrequent.

MechanizedpiercecapacityThethicknessofmildsteelthatmaybepiercedwithgoodcutqualityandwithoutexcessivewearontheconsumableparts.Ifedgestarting,thecutcapacityis thesameashandheldcapacity.

Withthemaximumpowerandperformanceforairplasmainourline,thePowermax1650deliverssuperiorcutcapabilitieson1-1/4"(32mm)thickmetals.Ithasthedutycycleandreliabilityfor themostdemandingcuttingandgougingjobs.

Handheld cut capacity

Recommended 1-1/4"�(32�mm) at�20�ipm�(500�mm/min)1-1/2"�(38�mm) at�10�ipm�(250�mm/min)

Severance 1-3/4"�(44�mm) at�5�ipm�(125�mm/min)

mechanized pierce capacity3/4"�(19�mm)

9

New!

Handheld cut capacity

Recommended� 3/4"�(19�mm) at�20�ipm�(500�mm/min)1"�(25�mm) at�10�ipm�(250�mm/min)

Severance 1-1/4"�(32�mm) at�5�ipm�(125�mm/min)

mechanized pierce capacity

1/2"�(12�mm)

Handheld cut capacity

Recommended� 1"�(25�mm) at�20�ipm�(500�mm/min)1-1/4"�(32�mm) at�10�ipm�(250�mm/min)

Severance 1-1/2"�(38�mm) at�5�ipm�(125�mm/min)

mechanized pierce capacity

5/8"�(16�mm)

M65/85�full-length�machine�torch

M65m/85m�mini-machine�torch

H65s/85s�15°�hand�torch

H65/85�75°�hand�torch

Withmoretorchoptionsandthelatesttechnologicalinnovations,thePowermax65andPowermax85helpyoudomorethaneverbefore.FourDuramax™torchstylesprovidegreaterversatilityandenableoperatorstoeasilyselecttherighttoolforthejob.SmartSense™technologyautomaticallyadjustsgaspressureaccordingtocuttingmodeandtorchleadlengthforoptimumcutting.

T100m�machine�torch

T100�hand�torch

available technologies and features

model

power supply torch Work cable miscellaneous

Drag

-cutti

ng��

capa

bility

Goug

ing�m

ode

Pilot�

arc�co

ntroll

er

Conta

ct�sta

rt

Boos

t�Con

dition

er��

circu

it�3

Auto-

volta

ge�3

FastC

onne

ct�de

sign

Basic

�mac

hine�

interf

ace

Adva

nced

�autom

ation

�int

erfac

e

90°�h

and�t

orch

75°�h

and�t

orch

15°�h

and�t

orch

Full-l

ength

�mac

hine�

torch

Mini-

mach

ine�to

rch

Hand

�clam

p

C-sty

le�cla

mp

Magn

etic�c

lamp

Ring�t

ermina

l

Remo

te�pe

ndan

t

Carry

�strap

Whe

el�ge

ar

Powermax30 O O O O O O O OPowermax45 O O O O O O O O O O O OPowermax65 O O O O O O O O O O O O O O O O O OPowermax85 O O O O O O O O O O O O O O O O O OPowermax1650 O O O O O O O O O O O O O� 3�On�CSA�models

1 1

powermax30 powermax45 powermax65 powermax85 powermax1650Handheld cut capacity

Recommended 1/4"�(6�mm) 1/2"�(12�mm) 3/4"�(19�mm) 1"�(25�mm) 1-1/4"�(32�mm)3/8"�(10�mm) 3/4"�(19�mm) 1"�(25�mm) 1-1/4"�(32�mm) 1-1/2"�(38�mm)

Severance 1/2"�(12�mm) 1"�(25�mm) 1-1/4"�(32�mm) 1-1/2"�(38�mm) 1-3/4"�(44�mm)mechanized pierce capacityMaximum

Not�applicable 3/8"�(10�mm) 1/2"�(12�mm) 5/8"�(16�mm) 3/4"�(19�mm)

Gouge�capacity�Metal�removed�per�hour Not�applicable 6.2�lbs�(2.8�kg) 10.7�lbs�(4.8�kg) 19.5�lbs�(8.8�kg) 21.8�lbs�(9.8�kg)

depth�x�width1 Not�applicable .13"�(3.3�mm)�x�.22"�(5.5�mm) .14"�(3.5�mm)�x�.26"�(6.6�mm) .23"�(5.8�mm)�x�.28"�(7.1�mm) .26"�(6.6�mm)�x�.28"�(7.1�mm)Output�current 15�–�30�A 20�–�45�A 20�–�65�A 25�–�85�A 30�–�100�AInput�voltage CSA� 120�–�230�V,�1-PH�50/60�Hz

CE� 120�–�230�V,�1-PH�50/60�Hz�CSA� 200�–�240�V,�1-PH,�50-60�HzCE� 230�V,�1-PH,�50-60�HzCE� 400�V,�3-PH,�50-60�Hz

CSA� 200�–�480�V,�1-PH,�50-60�Hz� 200�–�600�V,�3-PH,�50-60�HzCE� 400�V,�3-PH,�50-60�Hz

CSA� 200�–�480�V,�1-PH,�50-60�Hz� 200�–�600�V,�3-PH,�50-60�HzCE� 400�V,�3�PH,�50-60�Hz

CSA� 200�–�600�V,�3-PH,�50/60�HzCE� 230�–�400�V,�3-PH,�50/60�Hz

Rated�output�voltage 83�VDC 132�VDC 139�VDC 143�VDC 160�VDCInput�current CSA� 120�–�230�V,�1-PH:�26�–�13.5�A

CE� 120�–�230�V,�1-PH:�26�–�13.5�ACSA� 200/230�V,�1-PH,�34/28�ACE� 230�V,�1-PH,�30�A� 380/400�V,�3-PH,�10.5/10�A

CSA� 200/208/240/480�V,�1-PH� 52/50/44/22�A� 200/208/240/480/600�V,�3-PH� 32/31/27/13/13�ACE� 380/400�V,�3-PH� 15.5/15�A

CSA� 200/208/240/480�V,�1-PH� 70/68/58/29�A� 200/208/240/480/600�V,�3-PH� 42/40/35/18/17�ACE� 380/400�V,�3-PH� 20.5/19.5�A

CSA� 200/208/230/240/400/480/600�V,�3-PH� 53/51/46/44/27/22/21�ACE� 230/380/400�V,�3-PH� 46/26/27�A

Duty�cycle�at�full�output2 CSA� 50%,�230�V� 35%,�120�VCE� 50%,�230�V� 35%,�120�V

CSA� 50%�@�45�A,�200�–�240�V,�1-PH� 60%�@�41�A,�200�–�240�V,�1-PH� 100%�@�32�A,�200�–�240�V,�1-PHCE� 50%�@�45�A,�230�V,�1-PH� 60%�@�41�A,�230�V,�1-PH� 100%�@�32�A,�230�V,�1-PHCE� 50%�@�45�A,�380/400�V,�3-PH� 60%�@�41�A,�380/400�V,�3-PH� 100%�@�32�A,�380/400�V,�3-PH

CSA� 50%�@�65�A,�230�–�600�V,�1/3-PH� 40%�@�65�A�200�–�208�V,�1/3-PH� 100%�@�46�A,�230�–�600�V,�1/3-PHCE� 50%�@�65�A�380/400�V,�3-PH� 100%�@�46A�380/400�V,�3-PH

CSA� 60%�@�85�A,�230�–�600�V,�3-PH� 60%�@�85�A,�480�V,�1-PH� 50%�@�85�A,�240�V,�1-PH� �50%�@�85�A�200�–�208�V,�3-PH� 40%�@�85�A�200�–�208�V,�1-PH� 100%�@�66�A,�230�–�600�V,�1/3-PHCE� 60%�@�85�A�380/400�V,�3-PH� 100%�@�66�A�380/400�V,�3-PH

CSA� 60%�@�100�A,�200�–�208�V,�3-PH� 70%�@�100�A,�230�–�240�V,�3-PH� 80%�@�100�A,�380�–�600�V,�3-PH� 100%�@�80�A,�200�–�208�V,�3-PH� 100%�@�85�A,�230�–�240�V,�3-PH� 100%�@�90�A,�400�–�600�V,�3-PHCE� 70%�@�100�A,�230�–�240�V,�3-PH� 80%�@�100�A,�380�–�415�V,�3-PH� 100%�@�85�A,�230�–�240�V,�3-PH

Dimensions�with�handledepth�x�width�x�height

14.0�x�6.6�x�12.0"(356�x�168�x�305�mm)

16.75�x�6.75�x�13.7"(426�x�172�x�348�mm)

19.7�x�9.2�x�17.9"(500�x�234�x�455�mm)

19.7�x�9.2�x�17.9"(500�x�234�x�455�mm)

26.4�x�16.8�x�25.8"(671�x�427�x�655�mm)

Weight�with�torch CSA� 20�lbs�(9�kg)CE� 21�lbs�(10�kg)

CSA� 37�lbs�(17�kg)CE� 35�lbs�(16�kg)

CSA� 64�lbs�(29�kg)CE� 57�lbs�(26�kg)

CSA� 71�lbs�(32�kg)CE� 62�lbs�(28�kg)

CSA� 141�lbs�(64�kg)CE� 144�lbs�(65�kg)

Gas�supply Air�or�N2 Air�or�N2 Air�or�N2 Air�or�N2 Air�or�N2Recommended�gas�inlet�flow�rate/pressure 240�scfh,�4�scfm�(113�l/min)�@��

80�psi�(5.5�bar)Cutting:�360�scfh,�6�scfm��

(170�l/min)�@�80�psi�(5.5�bar)Gouging:�360�scfh,�6�scfm��

(170�l/min)�@�60�psi�(4.1�bar)

Cutting:�400�scfh,�6.7�scfm��(189�l/min)�@�85�psi�(5.6�bar)

Gouging:�450�scfh,�7.5�scfm��(212�l/min)�@�70�psi�(4.8�bar)

Cutting:�400�scfh,�6.7�scfm��(189�l/min)�@�85�psi�(5.6�bar)

Gouging:�450�scfh,�7.5�scfm��(212�l/min)�@�70�psi�(4.8�bar)

Cutting:�550�scfh,�9.2�scfm��(260�l/min)�@�75�psi�(5.1�bar)

Gouging:�550�scfh,�9.2�scfm��(260�l/min)�@�70�psi�(4.8�bar)

Torch�lead�lengths� Handheld 15'�(4.5�m) 20',�50',�75'��(6.1�m,�15.2�m,�22.8�m)

10',�25',�50',�75'�(3�m,�7.6�m,�15.2�m,�22.8�m)

10',�25',�50',�75'��(3�m,�7.6�m,�15.2�m,�22.8�m)

25',�50',�75'�(7.6�m,�15.2�m,�22.8�m)

� Mechanized Not�applicable 15',�25',�35',�50',�75'��(4.5�m,�7.6�m,�10.7�m,�15.2�m,�22.8�m)

15',�25',�35',�50',�75'��(4.5�m,�7.6�m,�10.7�m,�15.2�m,�22.8�m)

15',�25',�35',�50',�75'��(4.5�m,�7.6�m,�10.7�m,�15.2�m,�22.8�m)

25',�35',�50',�75'�(7.6�m,�10.7�m,�15.2�m,�22.8�m)

�1� Dependent�on�speed,�torch�angle�and�standoff.�2� �Hypertherm’s�duty�cycle�ratings�are�established�at�104°�F�(40°�C),�according�to�international�standards,�and�are�determined�at�actual�cutting�arc�voltage�levels.�

Competitive�systems�are�often�rated�at�room�temperature�70°�F�(20°�C)�and�at�theoretical�output�voltages,�which�allows�duty�cycle�ratings�to�be�significantly�overstated.

Pick it & Click it!Introducing EZ Parts by MultiCam—the latest parametric software in parts manufacturing. Designing and creating parts has never been easier! If you can think it, EZ Parts can make it.

Offering a complete parts library, 54 standard templates and a customizing feature, MultiCam EZ Parts software makes nesting parts as easy as 1,2,3.

1. Select a part from the EZ Parts library and fill in the custom parameters. 2. Click and send the part for toolpathing. 3. Click Nest and cut out the parts.

With a click of the mouse, MultiCam EZ Parts can create and nest multiple parts on one sheet of material. And that’s not all! Whether you want to define a new gusset, flange or lift hook, MultiCam EZ Parts has the solution.

Work Smarter, Not Harder.

tel 972.929.4070www.multicam.com

Innovation. Quality. Performance.

© 2007 MultiCam L.P. All Rights Reserved.