Improved Adhesion EVA for Extrusion Coating / Extrusion ... · Improved Adhesion EVA for ....

26
Improved Adhesion EVA for Extrusion Coating / Extrusion Laminating Presented by: Scott Weber AD&TS Engineer Celanese

Transcript of Improved Adhesion EVA for Extrusion Coating / Extrusion ... · Improved Adhesion EVA for ....

  • Improved Adhesion EVA for Extrusion Coating / Extrusion

    Laminating

    Presented by:Scott WeberAD&TS EngineerCelanese

  • • Objective

    • Market / Applications

    • Experimental Procedures

    • Results

    • Conclusions

    Overview

  • Improved Adhesion EVA

    Objective: Improve adhesion of EVA to substrates in extrusion coating / lamination processes

    Potential Cost/Efficiency Benefits• Increased adhesion to substrates• Increased line speeds • Reduced air-gaps for improved neck-in• Reduced melt temperatures

  • • Flexible Packaging• Lidding stock• Cheese packaging

    • Thermal Lamination• Document protection• Gift cards

    Markets / Applications

  • Celanese Ateva® ExtruBond™ EVA Extrusion Coating Grades

    Property Ranges• VA 16-28%• MI 6-30

    Additives• Antioxidant• Slip• Antiblock• Chill Roll

    Release• UV Stabilizer

    1615 16% VA, 15 MI

    1641 16% VA, 28 MI

    1941 19% VA, 30 MI

    1943MS 19% VA, 30 MI

    1943SB 19% VA, 30 MI

    2020 20% VA, 20 MI

    2861A 28% VA, 6 MI

    2821A 28% VA, 25 MI

  • Experimental Approach

    • Performed lab studies to evaluate if the new technology will increase adhesion to PET substrates

    • Produced simulated extrusion coated samples for adhesion testing

    • Measure adhesion force of samples

  • Simulated Extrusion Coating Samples

    • Produced simulated Extrusion coated samples for adhesion testing

    • EVA 1 - 16% VA 8.5 MI (Standard)• EVA 2 - 16% VA 8.5 MI (New Technology)• 92ga PET (Hand sheets)

    • Tested untreated and corona treated PET

    • Measure adhesion force of samples

    • If successful, complete extrusion coating trials on production line

  • Experimental Approach

    • Adhesion test samples were prepared using a laboratory cast film line

    • Coating Thickness –25microns (1mil)

    • Line Speed 1.5 m/min (5 fpm)

  • Experimental Approach

    • PET Slip sheets were fed by hand onto the rubber roll to create a coated sample.

    • Coated untreated and corona treated PET

    • One inch wide strips were cut from the coated samples for adhesion testing

    Molten EVA Extrudate

    Rubber Roll

    Metal Chill Roll

    Polyester Film Fed by Hand

    Die

  • Lab Trials Adhesion Results

    • Untreated PET Film (Gen 1)

    • EVA 1 = 6 g/cm (15 g/in)• EVA 2 = 7.5 g/cm (19 g/in)

    • ~ 25% Adhesion Improvement

  • • Corona Treated PET Film ( Gen 1)

    • EVA 1 = 23.5 g/cm (60 g/in)• EVA 2 = 31.5 g/cm (80 g/in)

    • ~ 30% Adhesion Improvement

    Lab Trials Adhesion Results

  • • Modified the Technology ( Gen 2)• Corona Treated PET Film

    • EVA 1 = 23.5 g/cm (60 g/in)• EVA 2 = 146 g/cm (370 g/in)

    • ~ 515% Adhesion Improvement

    Lab Trials Adhesion Results

  • Extrusion Coating Trials

    • Next steps for scale up production EC trials

    • Purchased line time for commercial Extrusion Coating Trials

    • Define Trial Conditions

  • Extrusion Coating Trials

    • Extrusion Coating Trial Conditions• 1 Mil Coating - Melt Temperature 227°C (440°F)• Line Speeds 107m/min & 214m/min (350 fpm / 700 fpm)• 12 micron (48ga) PET • Substrate pre-treatments

    • No Treatment• Corona• Corona / Primer / Ozone

    • 178mm (7in) Air-gap

  • EVA 1 EVA 2 % IncreaseUntreated film107 mpm (350 fpm) 8 (20) 12 (30) 50%214 mpm (700 fpm) 8 (20) 16 (40) 100%

    Corona treated107 mpm (350 fpm) 16 (40) 55 (140) 250%214 mpm (700 fpm) 24 (60) 63 (160) 167%

    Corona/primer/O3107 mpm (350 fpm) 110 (280) 173 (440) 57%214 mpm (700 fpm) 106 (270) 173 (440) 63%

    Force g/cm (g/in)

    Extrusion Coating Trial Adhesion Results

  • Heat Seal Performance

    Chart1

    7070

    7575

    8080

    8585

    9090

    9595

    100100

    EVA 2

    EVA 1

    control

    mod

    Temperature (Deg C)

    Heat Seal Strength (g/cm)

    4

    3

    26

    37

    127

    95

    519

    587

    1651

    1513

    1807

    1489

    1559

    1523

    data - all samples

    Average of ValueComponentUnits2

    Peel LoadMax LoadPeel ForceMax Force

    Id textSealTempTest numberResult row noFailureTypegglbf/inlbf/in

    1615 (350 fpm) NT70127646531Adhesive33640.0730.141

    2Adhesive380.0060.018

    3Adhesive260.0040.014

    4Adhesive280.0050.017

    5Adhesive370.0060.016

    12764653 Average9190.01880.0412

    12764653 StdDev14250.03031006430.0558094974

    75127646541Adhesive691860.1530.41

    2Adhesive31670.0690.148

    3Adhesive451490.0990.328

    4Adhesive44840.0960.186

    5Adhesive2082750.4590.607

    12764654 Average791520.17520.3358

    12764654 StdDev73840.16154937330.1849491822

    80127591481Delaminate3775520.8321.218

    2Delaminate4305170.9481.14

    3Cohesive1725760.3791.271

    4Cohesive1405380.3091.186

    5Cohesive1835790.4041.276

    12759148 Average2605520.57441.2182

    12759148 StdDev133260.29308241160.0576211767

    85127591491Delaminate5368641.1821.906

    2Delaminate5555831.2241.285

    3Delaminate5075301.1181.168

    4Delaminate5397221.1881.592

    5Delaminate5486881.2071.517

    12759149 Average5376771.18381.4936

    12759149 StdDev181300.04032617020.2871555328

    90127591501Delaminate5235801.1531.28

    2Delaminate5156851.1351.51

    3Delaminate5186211.1411.368

    4Delaminate5226001.151.322

    5Delaminate5206421.1471.416

    12759150 Average5206261.14521.3792

    12759150 StdDev3400.00722495670.0890235924

    95127591511Delaminate5217671.1491.691

    2Delaminate5228151.1511.797

    3Delaminate5085211.1211.149

    4Delaminate5106781.1251.494

    5Delaminate5105541.1251.222

    12759151 Average5146671.13421.4706

    12759151 StdDev71290.01453272170.2832354145

    100127591521Delaminate5126361.1291.403

    12759152 Average5126361.1291.403

    12759152 StdDev

    105127591531Delaminate5196941.1451.53

    12759153 Average5196941.1451.53

    12759153 StdDev

    110127591541Delaminate5178521.1411.878

    12759154 Average5178521.1411.878

    12759154 StdDev

    115127591551Delaminate5136321.131.394

    12759155 Average5136321.131.394

    12759155 StdDev

    120127591561Delaminate2705570.5961.228

    12759156 Average2705570.5961.228

    12759156 StdDev

    125127591571Delaminate5286461.1641.425

    12759157 Average5286461.1641.425

    12759157 StdDev

    1615 (350 fpm) NT Total3464860.76286111111.0708611111

    1615 ( 350 fpm) C70127666181Adhesive12500.0270.11

    2Adhesive270.0040.015

    3Adhesive160.0020.014

    4Adhesive170.0030.014

    5Adhesive3120.0070.027

    12766618 Average4160.00860.036

    12766618 StdDev5190.0104546640.0417312832

    75127666191Adhesive1473230.3250.713

    2Adhesive26730.0580.16

    3Adhesive16530.0350.117

    4Adhesive21490.0450.108

    5Adhesive431050.0960.232

    12766619 Average511210.11180.266

    12766619 StdDev551150.12140716620.2546399419

    80127666201Delaminate56210481.2382.311

    2Delaminate24314280.5353.149

    3Delaminate5388501.1871.874

    4Delaminate17013150.3742.899

    5Delaminate47712541.0512.765

    12766620 Average39811790.8772.5996

    12766620 StdDev1792300.39581245560.5071053145

    85127666211Delaminate5189091.1422.003

    2Delaminate49710591.0962.334

    3Delaminate61310541.3522.324

    4Delaminate5569771.2262.153

    5Delaminate36811920.8112.629

    12766621 Average51010381.12542.2886

    12766621 StdDev911060.20090744140.2340625985

    90127666221Delaminate39810510.8772.317

    2Delaminate6959281.5322.045

    3Delaminate6089811.342.164

    4Delaminate61011171.3452.462

    5Delaminate13116600.2883.66

    12766622 Average48811471.07642.5296

    12766622 StdDev2282950.50262739680.6511668757

    95127666231Delaminate30310890.6692.401

    2Delaminate55814041.233.094

    3Delaminate63510361.42.283

    4Delaminate63512201.42.691

    5Delaminate44713210.9852.912

    12766623 Average51612141.13682.6762

    12766623 StdDev1421540.3118953350.3393813489

    100127666241Delaminate25016350.5523.605

    2Delaminate13713770.3023.035

    3Delaminate72210591.5912.336

    4Delaminate37512390.8262.732

    5Delaminate21614350.4753.163

    12766624 Average34013490.74922.9742

    12766624 StdDev2302160.50709634190.4751870158

    1615 ( 350 fpm) C Total3308660.72645714291.9100285714

    1615 ( 350 fpm) CPO70127666291Adhesive39960.0870.213

    2Adhesive370.0060.015

    3Adhesive480.0080.019

    4Adhesive170.0030.015

    5Adhesive390.0070.019

    12766629 Average10250.02220.0562

    12766629 StdDev16390.03627257920.0876766788

    75127666301Adhesive2085140.4591.133

    2Adhesive39870.0850.192

    3Adhesive20480.0440.106

    4Adhesive20720.0430.158

    5Adhesive421150.0940.254

    12766630 Average661670.1450.3686

    12766630 StdDev801950.1770607240.4306794632

    80127666311Adhesive17420120.3834.435

    2Adhesive36623050.8065.081

    3Adhesive28921400.6374.718

    4Adhesive33421120.7364.655

    5Adhesive454195714.314

    12766631 Average32321050.71244.6406

    12766631 StdDev1031340.22705792210.2954188552

    85127666321Cohesive122932242.717.109

    2Cohesive160329613.5346.528

    3Cohesive139536533.0758.054

    4Cohesive127935542.827.835

    5Cohesive109030542.4046.732

    12766632 Average131932892.90867.2516

    12766632 StdDev1933040.4244782680.6704694624

    90127666331Elongation4595570410.1312.574

    2Peel w/Elg423455219.33412.171

    3Peel w/Elg4741603710.45213.309

    4Peel w/Elg4633589810.21513.003

    5Cohesive277045046.1069.929

    12766633 Average419555339.247412.1972

    12766633 StdDev8196071.80569842441.3391049996

    95127666341Peel w/Elg4914604810.83313.334

    2Peel w/Elg4807596210.59913.143

    3Peel w/Elg4558600410.04913.236

    4Peel w/Elg406951748.9711.407

    5Peel w/Elg4607580810.15612.804

    12766634 Average4591579910.121412.7848

    12766634 StdDev3263610.71879016410.7956460897

    100127666351Peel w/Elg370256988.16212.563

    2Peel w/Elg402657818.87612.745

    3Peel w/Elg399759208.81213.051

    4Peel w/Elg392059428.64313.1

    5Peel w/Elg416159109.17313.029

    12766635 Average396158508.733212.8976

    12766635 StdDev1691060.37230055060.232920158

    105127674271Peel w/Elg4711581910.38512.829

    2Peel w/Elg432159599.52613.137

    3Peel w/Elg4565582010.06412.832

    4Peel w/Elg335352577.39111.589

    5Peel w/Elg417955839.21212.309

    12767427 Average422656889.315612.5392

    12767427 StdDev5302761.16863223470.6088827473

    110127675171Peel w/Elg4625582210.19612.836

    2Peel w/Elg4833596810.65513.157

    3Peel w/Elg4889598710.77713.2

    4Peel w/Elg411254969.06512.117

    5Peel w/Elg4640584610.22912.889

    12767517 Average4620582410.184412.8398

    12767517 StdDev3071970.67598431930.4345212308

    1615 ( 350 fpm) CPO Total259038095.71002222228.3972888889

    1615 ( 700 fpm) NT70127675931Adhesive36980.080.217

    2Adhesive060.0010.014

    3Adhesive4110.0080.025

    4Adhesive370.0060.016

    5Adhesive501200.110.265

    12767593 Average19480.0410.1074

    12767593 StdDev23560.05048762220.1232043019

    75127675941Delaminate2293120.5050.688

    2Adhesive12280.0260.062

    3Adhesive4180.0080.039

    4Adhesive6190.0120.041

    5Adhesive921610.2030.354

    12767594 Average691080.15080.2368

    12767594 StdDev971290.21413477060.285190638

    80127675951Delaminate3945970.8691.317

    2Delaminate1495770.3291.272

    3Delaminate4616491.0161.431

    4Adhesive984740.2151.045

    5Adhesive954360.2080.961

    12767595 Average2395470.52741.2052

    12767595 StdDev175890.38548450030.1957324705

    85127675961Delaminate59110421.3042.298

    2Delaminate5809131.2782.012

    3Delaminate5637151.241.576

    4Delaminate5485981.2081.318

    5Delaminate5345881.1781.297

    12767596 Average5637711.24161.7002

    12767596 StdDev232000.05097842680.4412076609

    90127675971Delaminate5937641.3071.683

    2Delaminate5747601.2651.676

    3Delaminate5275671.1621.25

    4Delaminate5286501.1641.434

    5Delaminate5818871.281.956

    12767597 Average5617261.23561.5998

    12767597 StdDev311220.06796543240.2690059479

    95127675981Delaminate5837791.2861.717

    2Delaminate5486931.2081.528

    3Delaminate5296231.1671.374

    4Delaminate6237701.3741.697

    5Delaminate6728211.4821.81

    12767598 Average5917371.30341.6252

    12767598 StdDev58790.1273687560.173409054

    100127675991Delaminate60210101.3262.227

    2Delaminate5738021.2631.767

    3Delaminate5496461.211.425

    4Delaminate5777251.2711.598

    5Delaminate5326021.1721.328

    12767599 Average5677571.24841.669

    12767599 StdDev271610.05928153170.3541983907

    1615 ( 700 fpm) NT Total3735280.82117142861.1633714286

    1615 ( 700 fpm) C70127680211Adhesive9380.020.084

    2Adhesive160.0030.014

    3Adhesive270.0040.015

    4Adhesive3110.0070.025

    5Adhesive1100.0020.023

    12768021 Average3140.00720.0322

    12768021 StdDev3130.00739594480.029354727

    75127680221Adhesive1513230.3320.712

    2Adhesive23580.050.128

    3Adhesive261090.0580.241

    4Adhesive18500.0390.11

    5Adhesive441580.0970.349

    12768022 Average521400.11520.308

    12768022 StdDev561110.12314909660.2454536616

    80127680231Delaminate58211891.2842.621

    2Adhesive17411240.3832.479

    3Adhesive1479730.3242.146

    4Adhesive19812030.4372.651

    5Adhesive19710970.4342.419

    12768023 Average26011170.57242.4632

    12768023 StdDev181920.40044887310.201859357

    85127680241Delaminate63516281.4013.589

    2Delaminate73111941.6112.633

    3Delaminate87011061.9192.438

    4Delaminate6488951.4291.973

    5Delaminate5448971.1991.978

    12768024 Average68611441.51182.5222

    12768024 StdDev1233010.27047587690.6624203348

    90127680251Delaminate98315812.1683.486

    2Delaminate81611641.7992.566

    3Delaminate61210161.352.24

    4Delaminate87811081.9352.444

    5Delaminate70110721.5442.363

    12768025 Average79811881.75922.6198

    12768025 StdDev1462260.32146648350.4985721613

    95127680261Delaminate93310882.0572.398

    2Delaminate6488931.431.968

    3Delaminate91211972.012.639

    4Delaminate6369061.4011.998

    5Delaminate63910851.4092.392

    12768026 Average75410341.66142.279

    12768026 StdDev1541310.3402503490.288189174

    100127680271Delaminate84213751.8563.031

    2Delaminate7259401.5982.073

    3Delaminate6808741.51.927

    4Delaminate6328651.3931.906

    5Delaminate7489201.6482.029

    12768027 Average7259951.5992.1932

    12768027 StdDev792150.17370089230.4734619309

    1615 ( 700 fpm) C Total4688051.03231428571.7739428571

    1615 ( 700 fpm) CPO70127683081Adhesive401450.0890.32

    2Adhesive3130.0080.029

    3Adhesive3130.0070.029

    4Adhesive380.0060.017

    5Adhesive4110.010.024

    12768308 Average11380.0240.0838

    12768308 StdDev16600.03636619310.132131374

    75127683091Adhesive41910.090.201

    2Adhesive22840.0490.185

    3Adhesive18420.0390.092

    4Adhesive42920.0930.202

    5Adhesive3725360.821.182

    12768309 Average991690.21820.3724

    12768309 StdDev1532060.33727392430.4548651449

    80127683101Adhesive18720380.4124.493

    2Adhesive33521390.7384.715

    3Adhesive29122110.6414.875

    4Adhesive20821750.4594.796

    5Adhesive25420400.564.497

    12768310 Average25521210.5624.6752

    12768310 StdDev60790.13259901960.1739603403

    85127683111Cohesive194537904.2888.356

    2Cohesive141738133.1248.407

    3Cohesive127337682.8078.306

    4Cohesive123035342.7137.792

    5Cohesive139235783.077.888

    12768311 Average145136973.20048.1498

    12768311 StdDev2871300.63206748060.2870665428

    90127683121Cohesive343858617.5812.922

    2Cohesive347558787.66112.958

    3Cohesive330058157.27612.819

    4Cohesive302160346.6613.302

    5Cohesive386659028.52313.011

    12768312 Average342058987.5413.0024

    12768312 StdDev307820.67576364210.1815937774

    95127683131Cohesive408756779.01112.515

    2Cohesive349058177.69412.823

    3Cohesive348358687.67912.937

    4Cohesive347458447.6612.885

    5Cohesive373957078.24212.581

    12768313 Average365557838.057212.7482

    12768313 StdDev266850.58664358860.1886085894

    100127683141Peel w/Elg417559499.20413.116

    2Peel w/Elg356758597.86312.918

    3Peel w/Elg437661789.64713.621

    4Peel w/Elg425361519.37713.561

    5Peel w/Elg425358009.37712.788

    12768314 Average412559879.093613.2008

    12768314 StdDev3201700.70594744850.3754606504

    105127700791Cohesive433560089.55713.246

    2Cohesive409463079.02513.905

    3Cohesive434559719.5813.164

    4Cohesive384758918.4812.988

    5Cohesive434958629.58812.923

    12770079 Average419460089.24613.2452

    12770079 StdDev2221770.4901117220.3911185242

    110127700801Peel w/Elg444261839.79213.631

    2Peel w/Elg406262438.95413.764

    3Peel w/Elg396160878.73213.418

    4Peel w/Elg440362259.70613.723

    5Peel w/Elg419260349.24313.302

    12770080 Average421261549.285413.5676

    12770080 StdDev209900.46136298070.1997906404

    115127700811Peel w/Elg422258809.30912.964

    2Peel w/Elg425360759.37713.394

    3Peel w/Elg389959138.59613.035

    4Peel w/Elg434158889.56912.982

    5Peel w/Elg411358279.06812.847

    12770081 Average416659179.183813.0444

    12770081 StdDev170940.37426554740.2071431872

    120127702541Peel w/Elg436258739.61712.947

    2Peel w/Elg446961169.85213.484

    3Peel w/Elg436157719.61512.724

    4Peel w/Elg451260319.94713.296

    5Peel w/Elg4671606510.29713.372

    12770254 Average447559719.865613.1646

    12770254 StdDev1281440.28174421020.3177165403

    125127702551Peel w/Elg262150385.77811.107

    2Peel w/Elg271247785.97810.533

    3Peel w/Elg337857357.44812.644

    4Peel w/Elg414361179.13513.486

    5Peel w/Elg345058737.60612.947

    12770255 Average326155087.18912.1434

    12770255 StdDev6205721.36796637391.2615923668

    1615 ( 700 fpm) CPO Total277744386.12219.78315

    K2743.x01 (350 fpm) NT70127699361Adhesive1120.0020.027

    2Adhesive480.0080.019

    3Adhesive5100.010.021

    4Adhesive3100.0060.022

    5Adhesive16600.0350.133

    12769936 Average6200.01220.0444

    12769936 StdDev6220.01308434180.0496165295

    75127699371Adhesive47960.1040.212

    2Adhesive31510.0680.112

    3Adhesive471230.1040.271

    4Adhesive25490.0560.108

    5Delaminate2773540.610.781

    12769937 Average851350.18840.2968

    12769937 StdDev1081270.2366533330.2793308075

    80127699381Adhesive1808030.3971.77

    2Adhesive2008670.441.912

    3Adhesive2315940.511.309

    4Adhesive1206550.2651.444

    5Adhesive1564470.3440.986

    12769938 Average1776730.39121.4842

    12769938 StdDev421670.09311659360.3691912783

    85127699391Delaminate5717171.2581.582

    2Delaminate61710581.3612.332

    3Delaminate5776731.2731.484

    4Delaminate61011021.3442.43

    5Delaminate5909431.3022.08

    12769939 Average5938991.30761.9816

    12769939 StdDev201950.04434298140.430351949

    90127699401Delaminate60312471.3292.749

    2Delaminate62812031.3852.652

    3Delaminate6249801.3752.161

    4Delaminate6058861.3341.954

    5Delaminate6079351.3372.061

    12769940 Average61310501.3522.3154

    12769940 StdDev121640.025961510.3607205289

    95127699411Delaminate6788591.4941.893

    2Delaminate5947971.3091.758

    3Delaminate6667961.4691.754

    4Delaminate6169791.3582.159

    5Delaminate63712601.4032.779

    12769941 Average6389381.40662.0686

    12769941 StdDev351950.07653953230.4298607914

    100127699421Delaminate5888671.2961.911

    2Delaminate5777321.2731.614

    3Delaminate6217441.371.639

    4Delaminate5927611.3061.678

    5Delaminate6077271.3391.604

    12769942 Average5977661.31681.6892

    12769942 StdDev17580.03804865310.1272348223

    K2743.x01 (350 fpm) NT Total3876400.85354285711.4114571429

    K2743.x01 (350 fpm) C70127702571Adhesive260.0030.014

    2Adhesive060.0010.014

    3Adhesive0700.015

    4Adhesive170.0030.015

    5Adhesive5240.0110.052

    12770257 Average2100.00360.022

    12770257 StdDev280.00433589670.0167779617

    75127702581Adhesive241090.0530.239

    2Adhesive12370.0270.081

    3Adhesive24720.0520.16

    4Adhesive15460.0340.102

    5Adhesive1354000.2970.883

    12770258 Average421330.09260.293

    12770258 StdDev521520.11481855250.3354586413

    80127702591Adhesive32718150.7214.002

    2Adhesive16713330.3682.94

    3Adhesive22817340.5043.823

    4Adhesive31319210.694.234

    5Adhesive2088880.4591.958

    12770259 Average24915380.54843.3914

    12770259 StdDev694260.15194505590.9390797623

    85127702601Delaminate53623131.1815.099

    2Delaminate77723711.7145.227

    3Delaminate61318651.3524.111

    4Delaminate61720951.3614.619

    5Delaminate87120221.924.457

    12770260 Average68321331.50564.7026

    12770260 StdDev1372090.3020865770.4608218745

    90127702611Delaminate60517581.3343.877

    2Delaminate56423401.2435.159

    3Delaminate57816961.2743.738

    4Delaminate52518651.1574.111

    5Delaminate50018471.1024.071

    12770261 Average55419011.2224.1912

    12770261 StdDev422550.09262019220.5616112534

    95127702621Delaminate60622271.3354.91

    2Delaminate66721301.474.695

    3Delaminate47421991.0464.848

    4Delaminate59619691.3144.341

    5Delaminate40823550.95.193

    12770262 Average55021761.2134.7974

    12770262 StdDev1061420.23291200050.3124600774

    100127702631Delaminate115916692.5563.679

    2Delaminate60122671.3264.998

    3Delaminate109815102.4223.329

    4Delaminate80616501.7783.637

    5Delaminate94215112.0763.33

    12770263 Average92117212.03163.7946

    12770263 StdDev2263140.49788633240.6926415379

    K2743.x01 (350 fpm) C Total42913730.94525714293.0274571429

    K2743.x01 (350 fpm) CPO70127703071Adhesive380.0060.018

    2Adhesive260.0040.013

    3Adhesive4100.0080.021

    4Adhesive5150.0110.033

    5Adhesive23550.0520.121

    12770307 Average7190.01620.0412

    12770307 StdDev9210.02017919720.04521283

    75127703081Adhesive20680.0450.151

    2Adhesive35790.0770.174

    3Adhesive2104330.4620.956

    4Adhesive15300.0320.066

    5Adhesive1994060.4390.895

    12770308 Average962030.2110.4484

    12770308 StdDev1001990.21939576110.4379158595

    80127703091Adhesive28322690.6245.002

    2Adhesive23920350.5284.486

    3Adhesive20122710.4445.008

    4Adhesive34122630.7514.989

    5Adhesive13719430.3014.284

    12770309 Average24021560.52964.7538

    12770309 StdDev781560.17140390890.34422696

    85127703101Cohesive157738473.4778.481

    2Cohesive124537382.7448.241

    3Cohesive143639183.1668.637

    4Cohesive124839362.7528.677

    5Cohesive194837784.2948.329

    12770310 Average149138433.28668.473

    12770310 StdDev291860.6414560.1891665932

    90127703111Cohesive408060498.99513.336

    2Cohesive353957447.80312.663

    3Cohesive381958078.4212.802

    4Cohesive322054797.09912.079

    5Cohesive4567603610.06813.307

    12770311 Average384558238.47712.8374

    12770311 StdDev5152351.13534289970.518643712

    95127703121Peel w/Elg380658258.39112.842

    2Peel w/Elg422354859.30912.092

    3Peel w/Elg353558137.79312.817

    4Peel w/Elg389960428.59613.32

    5Peel w/Elg345758507.62112.897

    12770312 Average378458038.34212.7936

    12770312 StdDev3062010.67513850430.4424141725

    100127703131Peel w/Elg436661099.62513.467

    2Cohesive271760035.98913.235

    3Peel w/Elg381961448.4213.546

    4Peel w/Elg390360148.60413.258

    5Peel w/Elg4538605210.00513.342

    12770313 Average386960648.528613.3696

    12770313 StdDev712611.56914763490.1341055554

    K2743.x01 (350 fpm) CPO Total190534164.19871428577.531

    K2743.x01 (700 fpm) NT65127705061Adhesive180.0020.017

    2Adhesive0500.012

    12770506 Average170.0010.0145

    12770506 StdDev120.00141421360.0035355339

    70127705071Adhesive5140.0110.03

    2Adhesive2110.0050.025

    3Adhesive311130.0680.249

    4Adhesive270.0040.015

    5Adhesive461180.1010.26

    12770507 Average17530.03780.1158

    12770507 StdDev20580.04427979220.1267899838

    75127705081Adhesive1122660.2470.587

    2Adhesive952030.210.447

    3Adhesive752300.1650.508

    4Adhesive15390.0330.087

    5Adhesive20670.0440.148

    12770508 Average631610.13980.3554

    12770508 StdDev441020.09700360820.2238130917

    80127705091Delaminate3655900.8051.302

    2Delaminate1687140.3711.574

    3Delaminate1627050.3571.553

    4Delaminate3355870.7391.295

    5Delaminate4905791.081.278

    12770509 Average3046350.67041.4004

    12770509 StdDev140680.3075935630.1493295014

    85127705101Delaminate4996551.0991.444

    2Delaminate4977011.0951.545

    3Delaminate4955901.0921.301

    4Delaminate4978631.0961.903

    5Delaminate4956541.0911.442

    12770510 Average4976931.09461.527

    12770510 StdDev21030.00320936130.2274258121

    90127705111Delaminate5036971.111.537

    2Delaminate5047491.1111.652

    3Delaminate4967411.0941.634

    4Delaminate5017771.1051.713

    5Delaminate5339741.1762.148

    12770511 Average5077881.11921.7368

    12770511 StdDev151080.03246074550.238396099

    95127705121Delaminate5377021.1841.548

    2Delaminate5647571.2441.67

    3Delaminate5358381.181.848

    4Delaminate5339771.1752.155

    5Delaminate5226561.1521.446

    12770512 Average5387861.1871.7334

    12770512 StdDev161260.0341906420.2792271477

    100127705131Delaminate5786981.2751.539

    2Delaminate5028281.1071.826

    3Delaminate5437631.1971.682

    4Delaminate5427481.1941.648

    5Delaminate5777361.2711.623

    12770513 Average5487551.20881.6636

    12770513 StdDev31480.06887089370.1050347562

    K2743.x01 (700 fpm) NT Total3355230.73756756761.1538108108

    K2743.x01 (700 fpm) C70127707351Adhesive26820.0560.181

    2Adhesive290.0040.02

    3Adhesive34890.0740.197

    4Adhesive060.0010.013

    12770735 Average16470.033750.10275

    12770735 StdDev17450.03684539770.0998478008

    75127707361Adhesive3335430.7331.197

    2Adhesive15410.0330.09

    3Adhesive28980.0610.217

    4Adhesive341100.0750.243

    5Adhesive19850.0410.187

    12770736 Average861750.18860.3868

    12770736 StdDev1382070.30477663950.4566028909

    80127707371Adhesive34623980.7625.286

    2Adhesive29221750.6444.795

    3Adhesive62018921.3674.172

    4Cohesive52315291.1533.371

    5Adhesive21321900.474.827

    12770737 Average39920370.87924.4902

    12770737 StdDev1683360.3706126010.7405225857

    85127707381Break Seal44223150.9755.103

    2Break Seal58619761.2924.356

    3Break Seal24925870.5485.703

    4Break Seal42924690.9465.444

    5Break Seal23325080.5135.529

    12770738 Average38823710.85485.227

    12770738 StdDev1482420.32590750220.5335930097

    90127707391Break Seal20534090.4527.515

    2Break Seal56724341.255.366

    3Break Seal66322381.4624.934

    4Break Seal65524261.4445.349

    5Break Seal14425870.3185.703

    6Break Seal24428850.5386.36

    12770739 Average41326630.91066666675.8711666667

    12770739 StdDev2404240.52991873590.9354740866

    95127707401Break Seal44720170.9854.447

    2Break Seal28522590.6284.98

    3Break Seal60120261.3244.466

    4Break Seal27821670.6134.778

    5Break Seal61821881.3644.825

    12770740 Average44621310.98284.6992

    12770740 StdDev1641060.36206725890.2339181481

    100127707411Break Seal22025170.4845.55

    2Break Seal41820860.9224.598

    3Break Seal56821961.2514.841

    4Break Seal34521610.764.765

    5Break Seal73919171.6284.226

    12770741 Average45821751.0094.796

    12770741 StdDev2012190.44354255710.4836336423

    K2743.x01 (700 fpm) C Total32617320.71917142863.8181142857

    K2743.x01 (700 fpm) CPO70127707431Adhesive280.0030.018

    2Adhesive37900.0830.199

    3Adhesive180.0020.017

    4Adhesive180.0020.017

    5Adhesive33790.0720.175

    12770743 Average15390.03240.0852

    12770743 StdDev18420.04135577350.0933177368

    75127707441Adhesive2275490.51.21

    2Adhesive25600.0540.133

    3Adhesive22640.0480.141

    4Adhesive25760.0550.167

    5Adhesive451160.10.256

    12770744 Average691730.15140.3814

    12770744 StdDev892110.19598163180.4657695782

    80127707451Adhesive32324970.7135.506

    2Adhesive31525240.6945.564

    3Adhesive22824130.5035.319

    4Adhesive39224870.8645.482

    5Adhesive23224950.5125.5

    12770745 Average29824830.65725.4742

    12770745 StdDev69420.15173562530.0920445544

    85127707461Cohesive134338982.968.594

    2Cohesive179138673.9498.525

    3Cohesive132336302.9178.003

    4Cohesive156741673.4569.186

    5Cohesive233141815.1399.217

    12770746 Average167139493.68428.705

    12770746 StdDev4152300.91538226990.5076982371

    90127707471Peel w/Elg378056568.33412.469

    2Peel w/Elg353458727.79212.947

    3Peel w/Elg371860278.19713.288

    4Peel w/Elg426259759.39513.173

    5Peel w/Elg388561098.56513.467

    12770747 Average383659288.456613.0688

    12770747 StdDev2701750.59507587750.3847287356

    95127707481Peel w/Elg407755928.98712.329

    2Peel w/Elg374858688.26212.938

    3Peel w/Elg362555657.99212.269

    4Peel w/Elg347754967.66612.117

    5Peel w/Elg393059228.66313.055

    12770748 Average377156898.31412.5416

    12770748 StdDev2381930.52464797720.4244134776

    100127707491Peel w/Elg442458039.75212.794

    2Peel w/Elg422660269.31813.285

    3Peel w/Elg409562399.02713.755

    4Peel w/Elg402460828.87113.407

    5Peel w/Elg436862529.63113.783

    12770749 Average422760809.319813.4048

    12770749 StdDev1711830.37775613830.4040757355

    K2743.x01 (700 fpm) CPO Total198434774.37365714297.6658571429

    graph - all samples

    FailureType(All)

    ComponentPeel Load

    Result row no(All)

    Average of ValueId text

    SealTemp1615 (350 fpm) NT1615 ( 350 fpm) C1615 ( 350 fpm) CPO1615 ( 700 fpm) NT1615 ( 700 fpm) C1615 ( 700 fpm) CPOK2743.x01 (350 fpm) NTK2743.x01 (350 fpm) CK2743.x01 (350 fpm) CPOK2743.x01 (700 fpm) NTK2743.x01 (700 fpm) CK2743.x01 (700 fpm) CPO

    651

    70941019311627171615

    75795166695299854296638669

    80260398323239260255177249240304399298

    855375101319563686145159368314914973881671

    905204884195561798342061355438455074133836

    955145164591591754365563855037845384463771

    1005123403961567725412559792138695484584227

    10551942264194

    11051746204212

    1155134166

    1202704475

    1255283261

    graph - all samples

    656565656565656565656565

    707070707070707070707070

    757575757575757575757575

    808080808080808080808080

    858585858585858585858585

    909090909090909090909090

    959595959595959595959595

    100100100100100100100100100100100100

    105105105105105105105105105105105105

    110110110110110110110110110110110110

    115115115115115115115115115115115115

    120120120120120120120120120120120120

    125125125125125125125125125125125125

    Id text 1615 (350 fpm) NT

    Id text 1615 ( 350 fpm) C

    Id text 1615 ( 350 fpm) CPO

    Id text 1615 ( 700 fpm) NT

    Id text 1615 ( 700 fpm) C

    Id text 1615 ( 700 fpm) CPO

    Id text K2743.x01 (350 fpm) NT

    Id text K2743.x01 (350 fpm) C

    Id text K2743.x01 (350 fpm) CPO

    Id text K2743.x01 (700 fpm) NT

    Id text K2743.x01 (700 fpm) C

    Id text K2743.x01 (700 fpm) CPO

    0.5

    8.6

    3.8

    10

    18.6

    3.2

    10.6

    5.8

    1.6

    7.4

    17.2

    15.5

    14.8

    79.4

    50.6

    65.8

    68.6

    52.4

    99

    85.4

    42

    95.8

    63.4

    85.8

    68.8

    260.4

    398

    323.4

    239.4

    259.6

    255

    177.4

    248.6

    240.2

    304

    398.8

    298

    537

    510.4

    1319.2

    563.2

    685.6

    1451.4

    593

    682.8

    1490.8

    496.6

    387.8

    1671

    519.6

    488.4

    4194.6

    560.6

    798

    3420

    613.4

    554.4

    3845

    507.4

    413

    3835.8

    514.2

    515.6

    4591

    591

    753.6

    3654.6

    638.2

    550.2

    3784

    538.2

    445.8

    3771.4

    512

    340

    3961.2

    566.6

    725.4

    4124.8

    597

    921.2

    3868.6

    548.4

    458

    4227.4

    519

    4225.8

    4194

    517

    4619.8

    4212

    513

    4165.6

    270

    4475

    528

    3260.8

    700 fpm Samples

    FailureType(All)

    ComponentPeel Load

    Result row no(All)

    Average of ValueId text

    SealTemp1615 ( 700 fpm) NT1615 ( 700 fpm) C1615 ( 700 fpm) CPOK2743.x01 (700 fpm) NTK2743.x01 (700 fpm) CK2743.x01 (700 fpm) CPO

    651

    7019311171615

    75695299638669

    80239260255304399298

    8556368614514973881671

    9056179834205074133836

    9559175436555384463771

    10056772541255484584227

    1054194

    1104212

    1154166

    1204475

    1253261

    700 fpm Samples

    656565656565

    707070707070

    757575757575

    808080808080

    858585858585

    909090909090

    959595959595

    100100100100100100

    105105105105105105

    110110110110110110

    115115115115115115

    120120120120120120

    125125125125125125

    Id text 1615 ( 700 fpm) NT

    Id text 1615 ( 700 fpm) C

    Id text 1615 ( 700 fpm) CPO

    Id text K2743.x01 (700 fpm) NT

    Id text K2743.x01 (700 fpm) C

    Id text K2743.x01 (700 fpm) CPO

    0.5

    18.6

    3.2

    10.6

    17.2

    15.5

    14.8

    68.6

    52.4

    99

    63.4

    85.8

    68.8

    239.4

    259.6

    255

    304

    398.8

    298

    563.2

    685.6

    1451.4

    496.6

    387.8

    1671

    560.6

    798

    3420

    507.4

    413

    3835.8

    591

    753.6

    3654.6

    538.2

    445.8

    3771.4

    566.6

    725.4

    4124.8

    548.4

    458

    4227.4

    4194

    4212

    4165.6

    4475

    3260.8

    700 fpm NT Samples

    FailureType(All)

    ComponentPeel Load

    Result row no(All)

    Average of ValueId text

    SealTemp1615 ( 700 fpm) NTK2743.x01 (700 fpm) NT

    651

    701917

    756963

    80239304

    85563497

    90561507

    95591538

    100567548

    700 fpm NT Samples

    6565

    7070

    7575

    8080

    8585

    9090

    9595

    100100

    Id text 1615 ( 700 fpm) NT

    Id text K2743.x01 (700 fpm) NT

    0.5

    18.6

    17.2

    68.6

    63.4

    239.4

    304

    563.2

    496.6

    560.6

    507.4

    591

    538.2

    566.6

    548.4

    700 fpm C Samples

    FailureType(All)

    ComponentPeel Load

    Result row no(All)

    Average of ValueId text

    SealTemp1615 ( 700 fpm) CK2743.x01 (700 fpm) C

    70316

    755286

    80260399

    85686388

    90798413

    95754446

    100725458

    700 fpm C Samples

    7070

    7575

    8080

    8585

    9090

    9595

    100100

    Id text 1615 ( 700 fpm) C

    Id text K2743.x01 (700 fpm) C

    3.2

    15.5

    52.4

    85.8

    259.6

    398.8

    685.6

    387.8

    798

    413

    753.6

    445.8

    725.4

    458

    700 fpm CPO Samples

    FailureType(All)

    ComponentPeel Load

    Result row no(All)

    Average of ValueId text

    SealTemp1615 ( 700 fpm) CPOK2743.x01 (700 fpm) CPO

    701115

    759969

    80255298

    8514511671

    9034203836

    9536553771

    10041254227

    1054194

    1104212

    1154166

    1204475

    1253261

    700 fpm CPO Samples

    7070

    7575

    8080

    8585

    9090

    9595

    100100

    105105

    110110

    115115

    120120

    125125

    Id text 1615 ( 700 fpm) CPO

    Id text K2743.x01 (700 fpm) CPO

    10.6

    14.8

    99

    68.8

    255

    298

    1451.4

    1671

    3420

    3835.8

    3654.6

    3771.4

    4124.8

    4227.4

    4194

    4212

    4165.6

    4475

    3260.8

    350 fpm Samples

    FailureType(All)

    ComponentPeel Load

    Result row no(All)

    Average of ValueId text

    SealTemp1615 (350 fpm) NT1615 ( 350 fpm) C1615 ( 350 fpm) CPOK2743.x01 (350 fpm) NTK2743.x01 (350 fpm) CK2743.x01 (350 fpm) CPO

    709410627

    75795166854296

    80260398323177249240

    8553751013195936831491

    9052048841956135543845

    9551451645916385503784

    10051234039615979213869

    1055194226

    1105174620

    115513

    120270

    125528

    350 fpm Samples

    707070707070

    757575757575

    808080808080

    858585858585

    909090909090

    959595959595

    100100100100100100

    105105105105105105

    110110110110110110

    115115115115115115

    120120120120120120

    125125125125125125

    Id text 1615 (350 fpm) NT

    Id text 1615 ( 350 fpm) C

    Id text 1615 ( 350 fpm) CPO

    Id text K2743.x01 (350 fpm) NT

    Id text K2743.x01 (350 fpm) C

    Id text K2743.x01 (350 fpm) CPO

    8.6

    3.8

    10

    5.8

    1.6

    7.4

    79.4

    50.6

    65.8

    85.4

    42

    95.8

    260.4

    398

    323.4

    177.4

    248.6

    240.2

    537

    510.4

    1319.2

    593

    682.8

    1490.8

    519.6

    488.4

    4194.6

    613.4

    554.4

    3845

    514.2

    515.6

    4591

    638.2

    550.2

    3784

    512

    340

    3961.2

    597

    921.2

    3868.6

    519

    4225.8

    517

    4619.8

    513

    270

    528

    350 fpm NT Samples

    FailureType(All)

    ComponentPeel Load

    Result row no(All)

    Average of ValueId text

    SealTemp1615 (350 fpm) NTK2743.x01 (350 fpm) NT

    7096

    757985

    80260177

    85537593

    90520613

    95514638

    100512597

    105519

    110517

    115513

    120270

    125528

    350 fpm NT Samples

    7070

    7575

    8080

    8585

    9090

    9595

    100100

    105105

    110110

    115115

    120120

    125125

    Id text 1615 (350 fpm) NT

    Id text K2743.x01 (350 fpm) NT

    8.6

    5.8

    79.4

    85.4

    260.4

    177.4

    537

    593

    519.6

    613.4

    514.2

    638.2

    512

    597

    519

    517

    513

    270

    528

    350 fpm C Samples

    FailureType(All)

    ComponentPeel Load

    Result row no(All)

    Average of ValueId text

    SealTemp1615 ( 350 fpm) CK2743.x01 (350 fpm) C

    7042

    755142

    80398249

    85510683

    90488554

    95516550

    100340921

    350 fpm C Samples

    7070

    7575

    8080

    8585

    9090

    9595

    100100

    Id text 1615 ( 350 fpm) C

    Id text K2743.x01 (350 fpm) C

    3.8

    1.6

    50.6

    42

    398

    248.6

    510.4

    682.8

    488.4

    554.4

    515.6

    550.2

    340

    921.2

    350 fpm CPO Samples

    FailureType(All)

    ComponentPeel Load

    Result row no(All)

    Average of ValueId text

    SealTemp1615 ( 350 fpm) CPOK2743.x01 (350 fpm) CPOSealcontrolmod

    701077043

    756696752637

    803232408012795

    851319149185519587

    90419538459016511513

    95459137849518071489

    1003961386910015591523

    1054226

    11046201.5748041.181103

    10.23622614.566937

    50.00002737.401595

    204.330819231.102487

    650.000351595.669613

    711.417707586.220789

    613.779859599.606623

    350 fpm CPO Samples

    7070

    7575

    8080

    8585

    9090

    9595

    100100

    105105

    110110

    Id text 1615 ( 350 fpm) CPO

    Id text K2743.x01 (350 fpm) CPO

    10

    7.4

    65.8

    95.8

    323.4

    240.2

    1319.2

    1490.8

    4194.6

    3845

    4591

    3784

    3961.2

    3868.6

    4225.8

    4619.8

    job report

    7070

    7575

    8080

    8585

    9090

    9595

    100100

    105105

    110110

    AT 1615 (Control)

    K2743.X01(Adhesion modified)

    Id text 1615 ( 350 fpm) CPO

    Id text K2743.x01 (350 fpm) CPO

    Sealing Temperature (Deg C)

    Heat Seal Strength (g/in)

    10

    7.4

    65.8

    95.8

    323.4

    240.2

    1319.2

    1490.8

    4194.6

    3845

    4591

    3784

    3961.2

    3868.6

    4225.8

    4619.8

    FailureIndex

    control

    mod

    Sealing Temperature (Deg C)

    Heat Seal Strength (g/cm)

    AnalysisComponent nameId textResult column nameResult row noResult valueResult textUnitsResult statusTest statusTest parametersTest numberProgress vidFailureTypeSealTempFailureIndexComponentUnitsValue

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp18080.0CECT=80,S=1212759148Delaminate8012759148_Seal Temp_1Seal TempC80

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10DelaminateECT=80,S=1212759148Delaminate8012759148_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load1377377gECT=80,S=1212759148Delaminate8012759148_Peel Load_1Peel Loadg377

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1552552gECT=80,S=1212759148Delaminate8012759148_Max Load_1Max Loadg552

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force10.8320.832lbf/inECT=80,S=1212759148Delaminate8012759148_Peel Force_1Peel Forcelbf/in0.832

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force11.2181.218lbf/inECT=80,S=1212759148Delaminate8012759148_Max Force_1Max Forcelbf/in1.218

    HS_PEEL2(Seal Temp)1615 (350 fpm) NTSeal Temp28080.0CECT=80,S=1212759148Delaminate8012759148_Seal Temp_2Seal TempC80

    HS_PEEL2(FailureType)1615 (350 fpm) NTFailureType20DelaminateECT=80,S=1212759148Delaminate8012759148_FailureType_2FailureType0Delaminate

    HS_PEEL2(Peel Load)1615 (350 fpm) NTPeel Load2430430gECT=80,S=1212759148Delaminate8012759148_Peel Load_2Peel Loadg430

    HS_PEEL2(Max Load)1615 (350 fpm) NTMax Load2517517gECT=80,S=1212759148Delaminate8012759148_Max Load_2Max Loadg517

    HS_PEEL2(Peel Force)1615 (350 fpm) NTPeel Force20.9480.948lbf/inECT=80,S=1212759148Delaminate8012759148_Peel Force_2Peel Forcelbf/in0.948

    HS_PEEL2(Max Force)1615 (350 fpm) NTMax Force21.141.140lbf/inECT=80,S=1212759148Delaminate8012759148_Max Force_2Max Forcelbf/in1.14

    HS_PEEL3(Seal Temp)1615 (350 fpm) NTSeal Temp38080.0CECT=80,S=1212759148Cohesive8012759148_Seal Temp_3Seal TempC80

    HS_PEEL3(FailureType)1615 (350 fpm) NTFailureType30CohesiveECT=80,S=1212759148Cohesive8012759148_FailureType_3FailureType0Cohesive

    HS_PEEL3(Peel Load)1615 (350 fpm) NTPeel Load3172172gECT=80,S=1212759148Cohesive8012759148_Peel Load_3Peel Loadg172

    HS_PEEL3(Max Load)1615 (350 fpm) NTMax Load3576576gECT=80,S=1212759148Cohesive8012759148_Max Load_3Max Loadg576

    HS_PEEL3(Peel Force)1615 (350 fpm) NTPeel Force30.3790.379lbf/inECT=80,S=1212759148Cohesive8012759148_Peel Force_3Peel Forcelbf/in0.379

    HS_PEEL3(Max Force)1615 (350 fpm) NTMax Force31.2711.271lbf/inECT=80,S=1212759148Cohesive8012759148_Max Force_3Max Forcelbf/in1.271

    HS_PEEL4(Seal Temp)1615 (350 fpm) NTSeal Temp48080.0CECT=80,S=1212759148Cohesive8012759148_Seal Temp_4Seal TempC80

    HS_PEEL4(FailureType)1615 (350 fpm) NTFailureType40CohesiveECT=80,S=1212759148Cohesive8012759148_FailureType_4FailureType0Cohesive

    HS_PEEL4(Peel Load)1615 (350 fpm) NTPeel Load4140140gECT=80,S=1212759148Cohesive8012759148_Peel Load_4Peel Loadg140

    HS_PEEL4(Max Load)1615 (350 fpm) NTMax Load4538538gECT=80,S=1212759148Cohesive8012759148_Max Load_4Max Loadg538

    HS_PEEL4(Peel Force)1615 (350 fpm) NTPeel Force40.3090.309lbf/inECT=80,S=1212759148Cohesive8012759148_Peel Force_4Peel Forcelbf/in0.309

    HS_PEEL4(Max Force)1615 (350 fpm) NTMax Force41.1861.186lbf/inECT=80,S=1212759148Cohesive8012759148_Max Force_4Max Forcelbf/in1.186

    HS_PEEL5(Seal Temp)1615 (350 fpm) NTSeal Temp58080.0CECT=80,S=1212759148Cohesive8012759148_Seal Temp_5Seal TempC80

    HS_PEEL5(FailureType)1615 (350 fpm) NTFailureType50CohesiveECT=80,S=1212759148Cohesive8012759148_FailureType_5FailureType0Cohesive

    HS_PEEL5(Peel Load)1615 (350 fpm) NTPeel Load5183183gECT=80,S=1212759148Cohesive8012759148_Peel Load_5Peel Loadg183

    HS_PEEL5(Max Load)1615 (350 fpm) NTMax Load5579579gECT=80,S=1212759148Cohesive8012759148_Max Load_5Max Loadg579

    HS_PEEL5(Peel Force)1615 (350 fpm) NTPeel Force50.4040.404lbf/inECT=80,S=1212759148Cohesive8012759148_Peel Force_5Peel Forcelbf/in0.404

    HS_PEEL5(Max Force)1615 (350 fpm) NTMax Force51.2761.276lbf/inECT=80,S=1212759148Cohesive8012759148_Max Force_5Max Forcelbf/in1.276

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp18585.0CECT=85,S=1212759149Delaminate8512759149_Seal Temp_1Seal TempC85

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10DelaminateECT=85,S=1212759149Delaminate8512759149_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load1536536gECT=85,S=1212759149Delaminate8512759149_Peel Load_1Peel Loadg536

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1864864gECT=85,S=1212759149Delaminate8512759149_Max Load_1Max Loadg864

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force11.1821.182lbf/inECT=85,S=1212759149Delaminate8512759149_Peel Force_1Peel Forcelbf/in1.182

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force11.9061.906lbf/inECT=85,S=1212759149Delaminate8512759149_Max Force_1Max Forcelbf/in1.906

    HS_PEEL2(Seal Temp)1615 (350 fpm) NTSeal Temp28585.0CECT=85,S=1212759149Delaminate8512759149_Seal Temp_2Seal TempC85

    HS_PEEL2(FailureType)1615 (350 fpm) NTFailureType20DelaminateECT=85,S=1212759149Delaminate8512759149_FailureType_2FailureType0Delaminate

    HS_PEEL2(Peel Load)1615 (350 fpm) NTPeel Load2555555gECT=85,S=1212759149Delaminate8512759149_Peel Load_2Peel Loadg555

    HS_PEEL2(Max Load)1615 (350 fpm) NTMax Load2583583gECT=85,S=1212759149Delaminate8512759149_Max Load_2Max Loadg583

    HS_PEEL2(Peel Force)1615 (350 fpm) NTPeel Force21.2241.224lbf/inECT=85,S=1212759149Delaminate8512759149_Peel Force_2Peel Forcelbf/in1.224

    HS_PEEL2(Max Force)1615 (350 fpm) NTMax Force21.2851.285lbf/inECT=85,S=1212759149Delaminate8512759149_Max Force_2Max Forcelbf/in1.285

    HS_PEEL3(Max Force)1615 (350 fpm) NTMax Force31.1681.168lbf/inECT=85,S=1212759149Delaminate8512759149_Max Force_3Max Forcelbf/in1.168

    HS_PEEL4(Seal Temp)1615 (350 fpm) NTSeal Temp48585.0CECT=85,S=1212759149Delaminate8512759149_Seal Temp_4Seal TempC85

    HS_PEEL4(FailureType)1615 (350 fpm) NTFailureType40DelaminateECT=85,S=1212759149Delaminate8512759149_FailureType_4FailureType0Delaminate

    HS_PEEL4(Peel Load)1615 (350 fpm) NTPeel Load4539539gECT=85,S=1212759149Delaminate8512759149_Peel Load_4Peel Loadg539

    HS_PEEL4(Max Load)1615 (350 fpm) NTMax Load4722722gECT=85,S=1212759149Delaminate8512759149_Max Load_4Max Loadg722

    HS_PEEL4(Peel Force)1615 (350 fpm) NTPeel Force41.1881.188lbf/inECT=85,S=1212759149Delaminate8512759149_Peel Force_4Peel Forcelbf/in1.188

    HS_PEEL4(Max Force)1615 (350 fpm) NTMax Force41.5921.592lbf/inECT=85,S=1212759149Delaminate8512759149_Max Force_4Max Forcelbf/in1.592

    HS_PEEL5(Seal Temp)1615 (350 fpm) NTSeal Temp58585.0CECT=85,S=1212759149Delaminate8512759149_Seal Temp_5Seal TempC85

    HS_PEEL5(FailureType)1615 (350 fpm) NTFailureType50DelaminateECT=85,S=1212759149Delaminate8512759149_FailureType_5FailureType0Delaminate

    HS_PEEL5(Peel Load)1615 (350 fpm) NTPeel Load5548548gECT=85,S=1212759149Delaminate8512759149_Peel Load_5Peel Loadg548

    HS_PEEL5(Max Load)1615 (350 fpm) NTMax Load5688688gECT=85,S=1212759149Delaminate8512759149_Max Load_5Max Loadg688

    HS_PEEL3(Seal Temp)1615 (350 fpm) NTSeal Temp38585.0CECT=85,S=1212759149Delaminate8512759149_Seal Temp_3Seal TempC85

    HS_PEEL3(FailureType)1615 (350 fpm) NTFailureType30DelaminateECT=85,S=1212759149Delaminate8512759149_FailureType_3FailureType0Delaminate

    HS_PEEL3(Peel Load)1615 (350 fpm) NTPeel Load3507507gECT=85,S=1212759149Delaminate8512759149_Peel Load_3Peel Loadg507

    HS_PEEL3(Max Load)1615 (350 fpm) NTMax Load3530530gECT=85,S=1212759149Delaminate8512759149_Max Load_3Max Loadg530

    HS_PEEL3(Peel Force)1615 (350 fpm) NTPeel Force31.1181.118lbf/inECT=85,S=1212759149Delaminate8512759149_Peel Force_3Peel Forcelbf/in1.118

    HS_PEEL5(Max Force)1615 (350 fpm) NTMax Force51.5171.517lbf/inECT=85,S=1212759149Delaminate8512759149_Max Force_5Max Forcelbf/in1.517

    HS_PEEL5(Peel Force)1615 (350 fpm) NTPeel Force51.2071.207lbf/inECT=85,S=1212759149Delaminate8512759149_Peel Force_5Peel Forcelbf/in1.207

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp19090.0CECT=90,S=1212759150Delaminate9012759150_Seal Temp_1Seal TempC90

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10DelaminateECT=90,S=1212759150Delaminate9012759150_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load1523523gECT=90,S=1212759150Delaminate9012759150_Peel Load_1Peel Loadg523

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1580580gECT=90,S=1212759150Delaminate9012759150_Max Load_1Max Loadg580

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force11.1531.153lbf/inECT=90,S=1212759150Delaminate9012759150_Peel Force_1Peel Forcelbf/in1.153

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force11.281.280lbf/inECT=90,S=1212759150Delaminate9012759150_Max Force_1Max Forcelbf/in1.28

    HS_PEEL2(Seal Temp)1615 (350 fpm) NTSeal Temp29090.0CECT=90,S=1212759150Delaminate9012759150_Seal Temp_2Seal TempC90

    HS_PEEL2(FailureType)1615 (350 fpm) NTFailureType20DelaminateECT=90,S=1212759150Delaminate9012759150_FailureType_2FailureType0Delaminate

    HS_PEEL2(Peel Load)1615 (350 fpm) NTPeel Load2515515gECT=90,S=1212759150Delaminate9012759150_Peel Load_2Peel Loadg515

    HS_PEEL2(Max Load)1615 (350 fpm) NTMax Load2685685gECT=90,S=1212759150Delaminate9012759150_Max Load_2Max Loadg685

    HS_PEEL2(Peel Force)1615 (350 fpm) NTPeel Force21.1351.135lbf/inECT=90,S=1212759150Delaminate9012759150_Peel Force_2Peel Forcelbf/in1.135

    HS_PEEL3(Seal Temp)1615 (350 fpm) NTSeal Temp39090.0CECT=90,S=1212759150Delaminate9012759150_Seal Temp_3Seal TempC90

    HS_PEEL3(FailureType)1615 (350 fpm) NTFailureType30DelaminateECT=90,S=1212759150Delaminate9012759150_FailureType_3FailureType0Delaminate

    HS_PEEL3(Peel Load)1615 (350 fpm) NTPeel Load3518518gECT=90,S=1212759150Delaminate9012759150_Peel Load_3Peel Loadg518

    HS_PEEL3(Max Load)1615 (350 fpm) NTMax Load3621621gECT=90,S=1212759150Delaminate9012759150_Max Load_3Max Loadg621

    HS_PEEL3(Peel Force)1615 (350 fpm) NTPeel Force31.1411.141lbf/inECT=90,S=1212759150Delaminate9012759150_Peel Force_3Peel Forcelbf/in1.141

    HS_PEEL3(Max Force)1615 (350 fpm) NTMax Force31.3681.368lbf/inECT=90,S=1212759150Delaminate9012759150_Max Force_3Max Forcelbf/in1.368

    HS_PEEL4(Seal Temp)1615 (350 fpm) NTSeal Temp49090.0CECT=90,S=1212759150Delaminate9012759150_Seal Temp_4Seal TempC90

    HS_PEEL4(FailureType)1615 (350 fpm) NTFailureType40DelaminateECT=90,S=1212759150Delaminate9012759150_FailureType_4FailureType0Delaminate

    HS_PEEL4(Peel Load)1615 (350 fpm) NTPeel Load4522522gECT=90,S=1212759150Delaminate9012759150_Peel Load_4Peel Loadg522

    HS_PEEL4(Max Load)1615 (350 fpm) NTMax Load4600600gECT=90,S=1212759150Delaminate9012759150_Max Load_4Max Loadg600

    HS_PEEL2(Max Force)1615 (350 fpm) NTMax Force21.511.510lbf/inECT=90,S=1212759150Delaminate9012759150_Max Force_2Max Forcelbf/in1.51

    HS_PEEL4(Peel Force)1615 (350 fpm) NTPeel Force41.151.150lbf/inECT=90,S=1212759150Delaminate9012759150_Peel Force_4Peel Forcelbf/in1.15

    HS_PEEL4(Max Force)1615 (350 fpm) NTMax Force41.3221.322lbf/inECT=90,S=1212759150Delaminate9012759150_Max Force_4Max Forcelbf/in1.322

    HS_PEEL5(Seal Temp)1615 (350 fpm) NTSeal Temp59090.0CECT=90,S=1212759150Delaminate9012759150_Seal Temp_5Seal TempC90

    HS_PEEL5(FailureType)1615 (350 fpm) NTFailureType50DelaminateECT=90,S=1212759150Delaminate9012759150_FailureType_5FailureType0Delaminate

    HS_PEEL5(Peel Load)1615 (350 fpm) NTPeel Load5520520gECT=90,S=1212759150Delaminate9012759150_Peel Load_5Peel Loadg520

    HS_PEEL5(Peel Force)1615 (350 fpm) NTPeel Force51.1471.147lbf/inECT=90,S=1212759150Delaminate9012759150_Peel Force_5Peel Forcelbf/in1.147

    HS_PEEL5(Max Force)1615 (350 fpm) NTMax Force51.4161.416lbf/inECT=90,S=1212759150Delaminate9012759150_Max Force_5Max Forcelbf/in1.416

    HS_PEEL5(Max Load)1615 (350 fpm) NTMax Load5642642gECT=90,S=1212759150Delaminate9012759150_Max Load_5Max Loadg642

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force11.1491.149lbf/inECT=95,S=1212759151Delaminate9512759151_Peel Force_1Peel Forcelbf/in1.149

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force11.6911.691lbf/inECT=95,S=1212759151Delaminate9512759151_Max Force_1Max Forcelbf/in1.691

    HS_PEEL2(Seal Temp)1615 (350 fpm) NTSeal Temp29595.0CECT=95,S=1212759151Delaminate9512759151_Seal Temp_2Seal TempC95

    HS_PEEL2(FailureType)1615 (350 fpm) NTFailureType20DelaminateECT=95,S=1212759151Delaminate9512759151_FailureType_2FailureType0Delaminate

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp19595.0CECT=95,S=1212759151Delaminate9512759151_Seal Temp_1Seal TempC95

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10DelaminateECT=95,S=1212759151Delaminate9512759151_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load1521521gECT=95,S=1212759151Delaminate9512759151_Peel Load_1Peel Loadg521

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1767767gECT=95,S=1212759151Delaminate9512759151_Max Load_1Max Loadg767

    HS_PEEL2(Max Load)1615 (350 fpm) NTMax Load2815815gECT=95,S=1212759151Delaminate9512759151_Max Load_2Max Loadg815

    HS_PEEL2(Peel Force)1615 (350 fpm) NTPeel Force21.1511.151lbf/inECT=95,S=1212759151Delaminate9512759151_Peel Force_2Peel Forcelbf/in1.151

    HS_PEEL2(Max Force)1615 (350 fpm) NTMax Force21.7971.797lbf/inECT=95,S=1212759151Delaminate9512759151_Max Force_2Max Forcelbf/in1.797

    HS_PEEL3(Seal Temp)1615 (350 fpm) NTSeal Temp39595.0CECT=95,S=1212759151Delaminate9512759151_Seal Temp_3Seal TempC95

    HS_PEEL3(FailureType)1615 (350 fpm) NTFailureType30DelaminateECT=95,S=1212759151Delaminate9512759151_FailureType_3FailureType0Delaminate

    HS_PEEL2(Peel Load)1615 (350 fpm) NTPeel Load2522522gECT=95,S=1212759151Delaminate9512759151_Peel Load_2Peel Loadg522

    HS_PEEL3(Peel Load)1615 (350 fpm) NTPeel Load3508508gECT=95,S=1212759151Delaminate9512759151_Peel Load_3Peel Loadg508

    HS_PEEL3(Max Load)1615 (350 fpm) NTMax Load3521521gECT=95,S=1212759151Delaminate9512759151_Max Load_3Max Loadg521

    HS_PEEL3(Peel Force)1615 (350 fpm) NTPeel Force31.1211.121lbf/inECT=95,S=1212759151Delaminate9512759151_Peel Force_3Peel Forcelbf/in1.121

    HS_PEEL3(Max Force)1615 (350 fpm) NTMax Force31.1491.149lbf/inECT=95,S=1212759151Delaminate9512759151_Max Force_3Max Forcelbf/in1.149

    HS_PEEL4(Seal Temp)1615 (350 fpm) NTSeal Temp49595.0CECT=95,S=1212759151Delaminate9512759151_Seal Temp_4Seal TempC95

    HS_PEEL4(FailureType)1615 (350 fpm) NTFailureType40DelaminateECT=95,S=1212759151Delaminate9512759151_FailureType_4FailureType0Delaminate

    HS_PEEL4(Peel Load)1615 (350 fpm) NTPeel Load4510510gECT=95,S=1212759151Delaminate9512759151_Peel Load_4Peel Loadg510

    HS_PEEL4(Max Load)1615 (350 fpm) NTMax Load4678678gECT=95,S=1212759151Delaminate9512759151_Max Load_4Max Loadg678

    HS_PEEL4(Peel Force)1615 (350 fpm) NTPeel Force41.1251.125lbf/inECT=95,S=1212759151Delaminate9512759151_Peel Force_4Peel Forcelbf/in1.125

    HS_PEEL4(Max Force)1615 (350 fpm) NTMax Force41.4941.494lbf/inECT=95,S=1212759151Delaminate9512759151_Max Force_4Max Forcelbf/in1.494

    HS_PEEL5(Seal Temp)1615 (350 fpm) NTSeal Temp59595.0CECT=95,S=1212759151Delaminate9512759151_Seal Temp_5Seal TempC95

    HS_PEEL5(FailureType)1615 (350 fpm) NTFailureType50DelaminateECT=95,S=1212759151Delaminate9512759151_FailureType_5FailureType0Delaminate

    HS_PEEL5(Peel Load)1615 (350 fpm) NTPeel Load5510510gECT=95,S=1212759151Delaminate9512759151_Peel Load_5Peel Loadg510

    HS_PEEL5(Max Load)1615 (350 fpm) NTMax Load5554554gECT=95,S=1212759151Delaminate9512759151_Max Load_5Max Loadg554

    HS_PEEL5(Peel Force)1615 (350 fpm) NTPeel Force51.1251.125lbf/inECT=95,S=1212759151Delaminate9512759151_Peel Force_5Peel Forcelbf/in1.125

    HS_PEEL5(Max Force)1615 (350 fpm) NTMax Force51.2221.222lbf/inECT=95,S=1212759151Delaminate9512759151_Max Force_5Max Forcelbf/in1.222

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force11.1291.129lbf/inECT=100,S=1212759152Delaminate10012759152_Peel Force_1Peel Forcelbf/in1.129

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force11.4031.403lbf/inECT=100,S=1212759152Delaminate10012759152_Max Force_1Max Forcelbf/in1.403

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp1100100.0CECT=100,S=1212759152Delaminate10012759152_Seal Temp_1Seal TempC100

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10DelaminateECT=100,S=1212759152Delaminate10012759152_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load1512512gECT=100,S=1212759152Delaminate10012759152_Peel Load_1Peel Loadg512

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1636636gECT=100,S=1212759152Delaminate10012759152_Max Load_1Max Loadg636

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp1105105.0CECT=105,S=1212759153Delaminate10512759153_Seal Temp_1Seal TempC105

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10DelaminateECT=105,S=1212759153Delaminate10512759153_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load1519519gECT=105,S=1212759153Delaminate10512759153_Peel Load_1Peel Loadg519

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1694694gECT=105,S=1212759153Delaminate10512759153_Max Load_1Max Loadg694

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force11.1451.145lbf/inECT=105,S=1212759153Delaminate10512759153_Peel Force_1Peel Forcelbf/in1.145

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force11.531.530lbf/inECT=105,S=1212759153Delaminate10512759153_Max Force_1Max Forcelbf/in1.53

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10DelaminateECT=110,S=1212759154Delaminate11012759154_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load1517517gECT=110,S=1212759154Delaminate11012759154_Peel Load_1Peel Loadg517

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1852852gECT=110,S=1212759154Delaminate11012759154_Max Load_1Max Loadg852

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force11.1411.141lbf/inECT=110,S=1212759154Delaminate11012759154_Peel Force_1Peel Forcelbf/in1.141

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force11.8781.878lbf/inECT=110,S=1212759154Delaminate11012759154_Max Force_1Max Forcelbf/in1.878

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp1110110.0CECT=110,S=1212759154Delaminate11012759154_Seal Temp_1Seal TempC110

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp1115115.0CECT=115,S=1212759155Delaminate11512759155_Seal Temp_1Seal TempC115

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10DelaminateECT=115,S=1212759155Delaminate11512759155_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load1513513gECT=115,S=1212759155Delaminate11512759155_Peel Load_1Peel Loadg513

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1632632gECT=115,S=1212759155Delaminate11512759155_Max Load_1Max Loadg632

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force11.131.130lbf/inECT=115,S=1212759155Delaminate11512759155_Peel Force_1Peel Forcelbf/in1.13

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force11.3941.394lbf/inECT=115,S=1212759155Delaminate11512759155_Max Force_1Max Forcelbf/in1.394

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10DelaminateECT=120,S=1212759156Delaminate12012759156_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load1270270gECT=120,S=1212759156Delaminate12012759156_Peel Load_1Peel Loadg270

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1557557gECT=120,S=1212759156Delaminate12012759156_Max Load_1Max Loadg557

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force10.5960.596lbf/inECT=120,S=1212759156Delaminate12012759156_Peel Force_1Peel Forcelbf/in0.596

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force11.2281.228lbf/inECT=120,S=1212759156Delaminate12012759156_Max Force_1Max Forcelbf/in1.228

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp1120120.0CECT=120,S=1212759156Delaminate12012759156_Seal Temp_1Seal TempC120

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10DelaminateECT=125,S=1212759157Delaminate12512759157_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load1528528gECT=125,S=1212759157Delaminate12512759157_Peel Load_1Peel Loadg528

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1646646gECT=125,S=1212759157Delaminate12512759157_Max Load_1Max Loadg646

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force11.1641.164lbf/inECT=125,S=1212759157Delaminate12512759157_Peel Force_1Peel Forcelbf/in1.164

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force11.4251.425lbf/inECT=125,S=1212759157Delaminate12512759157_Max Force_1Max Forcelbf/in1.425

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp1125125.0CECT=125,S=1212759157Delaminate12512759157_Seal Temp_1Seal TempC125

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp17070.0CECT=70,S=1212764653Adhesive7012764653_Seal Temp_1Seal TempC70

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10AdhesiveECT=70,S=1212764653Adhesive7012764653_FailureType_1FailureType0Adhesive

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load13333gECT=70,S=1212764653Adhesive7012764653_Peel Load_1Peel Loadg33

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load16464gECT=70,S=1212764653Adhesive7012764653_Max Load_1Max Loadg64

    HS_PEEL3(Peel Force)1615 (350 fpm) NTPeel Force30.0040.004lbf/inECT=70,S=1212764653Adhesive7012764653_Peel Force_3Peel Forcelbf/in0.004

    HS_PEEL3(Max Force)1615 (350 fpm) NTMax Force30.0140.014lbf/inECT=70,S=1212764653Adhesive7012764653_Max Force_3Max Forcelbf/in0.014

    HS_PEEL4(Seal Temp)1615 (350 fpm) NTSeal Temp47070.0CECT=70,S=1212764653Adhesive7012764653_Seal Temp_4Seal TempC70

    HS_PEEL4(FailureType)1615 (350 fpm) NTFailureType40AdhesiveECT=70,S=1212764653Adhesive7012764653_FailureType_4FailureType0Adhesive

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force10.0730.073lbf/inECT=70,S=1212764653Adhesive7012764653_Peel Force_1Peel Forcelbf/in0.073

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force10.1410.141lbf/inECT=70,S=1212764653Adhesive7012764653_Max Force_1Max Forcelbf/in0.141

    HS_PEEL2(Seal Temp)1615 (350 fpm) NTSeal Temp27070.0CECT=70,S=1212764653Adhesive7012764653_Seal Temp_2Seal TempC70

    HS_PEEL2(FailureType)1615 (350 fpm) NTFailureType20AdhesiveECT=70,S=1212764653Adhesive7012764653_FailureType_2FailureType0Adhesive

    HS_PEEL2(Peel Load)1615 (350 fpm) NTPeel Load233gECT=70,S=1212764653Adhesive7012764653_Peel Load_2Peel Loadg3

    HS_PEEL2(Max Load)1615 (350 fpm) NTMax Load288gECT=70,S=1212764653Adhesive7012764653_Max Load_2Max Loadg8

    HS_PEEL2(Peel Force)1615 (350 fpm) NTPeel Force20.0060.006lbf/inECT=70,S=1212764653Adhesive7012764653_Peel Force_2Peel Forcelbf/in0.006

    HS_PEEL2(Max Force)1615 (350 fpm) NTMax Force20.0180.018lbf/inECT=70,S=1212764653Adhesive7012764653_Max Force_2Max Forcelbf/in0.018

    HS_PEEL3(Seal Temp)1615 (350 fpm) NTSeal Temp37070.0CECT=70,S=1212764653Adhesive7012764653_Seal Temp_3Seal TempC70

    HS_PEEL3(FailureType)1615 (350 fpm) NTFailureType30AdhesiveECT=70,S=1212764653Adhesive7012764653_FailureType_3FailureType0Adhesive

    HS_PEEL3(Peel Load)1615 (350 fpm) NTPeel Load322gECT=70,S=1212764653Adhesive7012764653_Peel Load_3Peel Loadg2

    HS_PEEL3(Max Load)1615 (350 fpm) NTMax Load366gECT=70,S=1212764653Adhesive7012764653_Max Load_3Max Loadg6

    HS_PEEL4(Max Load)1615 (350 fpm) NTMax Load488gECT=70,S=1212764653Adhesive7012764653_Max Load_4Max Loadg8

    HS_PEEL4(Peel Force)1615 (350 fpm) NTPeel Force40.0050.005lbf/inECT=70,S=1212764653Adhesive7012764653_Peel Force_4Peel Forcelbf/in0.005

    HS_PEEL4(Max Force)1615 (350 fpm) NTMax Force40.0170.017lbf/inECT=70,S=1212764653Adhesive7012764653_Max Force_4Max Forcelbf/in0.017

    HS_PEEL5(Seal Temp)1615 (350 fpm) NTSeal Temp57070.0CECT=70,S=1212764653Adhesive7012764653_Seal Temp_5Seal TempC70

    HS_PEEL5(FailureType)1615 (350 fpm) NTFailureType50AdhesiveECT=70,S=1212764653Adhesive7012764653_FailureType_5FailureType0Adhesive

    HS_PEEL5(Peel Load)1615 (350 fpm) NTPeel Load533gECT=70,S=1212764653Adhesive7012764653_Peel Load_5Peel Loadg3

    HS_PEEL5(Max Load)1615 (350 fpm) NTMax Load577gECT=70,S=1212764653Adhesive7012764653_Max Load_5Max Loadg7

    HS_PEEL5(Peel Force)1615 (350 fpm) NTPeel Force50.0060.006lbf/inECT=70,S=1212764653Adhesive7012764653_Peel Force_5Peel Forcelbf/in0.006

    HS_PEEL5(Max Force)1615 (350 fpm) NTMax Force50.0160.016lbf/inECT=70,S=1212764653Adhesive7012764653_Max Force_5Max Forcelbf/in0.016

    HS_PEEL4(Peel Load)1615 (350 fpm) NTPeel Load422gECT=70,S=1212764653Adhesive7012764653_Peel Load_4Peel Loadg2

    HS_PEEL1(FailureType)1615 (350 fpm) NTFailureType10AdhesiveECT=75,S=1212764654Adhesive7512764654_FailureType_1FailureType0Adhesive

    HS_PEEL1(Peel Load)1615 (350 fpm) NTPeel Load16969gECT=75,S=1212764654Adhesive7512764654_Peel Load_1Peel Loadg69

    HS_PEEL1(Seal Temp)1615 (350 fpm) NTSeal Temp17575.0CECT=75,S=1212764654Adhesive7512764654_Seal Temp_1Seal TempC75

    HS_PEEL1(Max Load)1615 (350 fpm) NTMax Load1186186gECT=75,S=1212764654Adhesive7512764654_Max Load_1Max Loadg186

    HS_PEEL1(Peel Force)1615 (350 fpm) NTPeel Force10.1530.153lbf/inECT=75,S=1212764654Adhesive7512764654_Peel Force_1Peel Forcelbf/in0.153

    HS_PEEL2(Max Load)1615 (350 fpm) NTMax Load26767gECT=75,S=1212764654Adhesive7512764654_Max Load_2Max Loadg67

    HS_PEEL2(Peel Force)1615 (350 fpm) NTPeel Force20.0690.069lbf/inECT=75,S=1212764654Adhesive7512764654_Peel Force_2Peel Forcelbf/in0.069

    HS_PEEL2(Max Force)1615 (350 fpm) NTMax Force20.1480.148lbf/inECT=75,S=1212764654Adhesive7512764654_Max Force_2Max Forcelbf/in0.148

    HS_PEEL3(Seal Temp)1615 (350 fpm) NTSeal Temp37575.0CECT=75,S=1212764654Adhesive7512764654_Seal Temp_3Seal TempC75

    HS_PEEL3(FailureType)1615 (350 fpm) NTFailureType30AdhesiveECT=75,S=1212764654Adhesive7512764654_FailureType_3FailureType0Adhesive

    HS_PEEL3(Peel Load)1615 (350 fpm) NTPeel Load34545gECT=75,S=1212764654Adhesive7512764654_Peel Load_3Peel Loadg45

    HS_PEEL3(Max Load)1615 (350 fpm) NTMax Load3149149gECT=75,S=1212764654Adhesive7512764654_Max Load_3Max Loadg149

    HS_PEEL3(Peel Force)1615 (350 fpm) NTPeel Force30.0990.099lbf/inECT=75,S=1212764654Adhesive7512764654_Peel Force_3Peel Forcelbf/in0.099

    HS_PEEL3(Max Force)1615 (350 fpm) NTMax Force30.3280.328lbf/inECT=75,S=1212764654Adhesive7512764654_Max Force_3Max Forcelbf/in0.328

    HS_PEEL4(Seal Temp)1615 (350 fpm) NTSeal Temp47575.0CECT=75,S=1212764654Adhesive7512764654_Seal Temp_4Seal TempC75

    HS_PEEL4(FailureType)1615 (350 fpm) NTFailureType40AdhesiveECT=75,S=1212764654Adhesive7512764654_FailureType_4FailureType0Adhesive

    HS_PEEL4(Peel Load)1615 (350 fpm) NTPeel Load44444gECT=75,S=1212764654Adhesive7512764654_Peel Load_4Peel Loadg44

    HS_PEEL1(Max Force)1615 (350 fpm) NTMax Force10.410.410lbf/inECT=75,S=1212764654Adhesive7512764654_Max Force_1Max Forcelbf/in0.41

    HS_PEEL2(Seal Temp)1615 (350 fpm) NTSeal Temp27575.0CECT=75,S=1212764654Adhesive7512764654_Seal Temp_2Seal TempC75

    HS_PEEL2(FailureType)1615 (350 fpm) NTFailureType20AdhesiveECT=75,S=1212764654Adhesive7512764654_FailureType_2FailureType0Adhesive

    HS_PEEL2(Peel Load)1615 (350 fpm) NTPeel Load23131gECT=75,S=1212764654Adhesive7512764654_Peel Load_2Peel Loadg31

    HS_PEEL4(Peel Force)1615 (350 fpm) NTPeel Force40.0960.096lbf/inECT=75,S=1212764654Adhesive7512764654_Peel Force_4Peel Forcelbf/in0.096

    HS_PEEL4(Max Force)1615 (350 fpm) NTMax Force40.1860.186lbf/inECT=75,S=1212764654Adhesive7512764654_Max Force_4Max Forcelbf/in0.186

    HS_PEEL5(Seal Temp)1615 (350 fpm) NTSeal Temp57575.0CECT=75,S=1212764654Adhesive7512764654_Seal Temp_5Seal TempC75

    HS_PEEL5(FailureType)1615 (350 fpm) NTFailureType50AdhesiveECT=75,S=1212764654Adhesive7512764654_FailureType_5FailureType0Adhesive

    HS_PEEL5(Peel Load)1615 (350 fpm) NTPeel Load5208208gECT=75,S=1212764654Adhesive7512764654_Peel Load_5Peel Loadg208

    HS_PEEL5(Max Load)1615 (350 fpm) NTMax Load5275275gECT=75,S=1212764654Adhesive7512764654_Max Load_5Max Loadg275

    HS_PEEL5(Peel Force)1615 (350 fpm) NTPeel Force50.4590.459lbf/inECT=75,S=1212764654Adhesive7512764654_Peel Force_5Peel Forcelbf/in0.459

    HS_PEEL5(Max Force)1615 (350 fpm) NTMax Force50.6070.607lbf/inECT=75,S=1212764654Adhesive7512764654_Max Force_5Max Forcelbf/in0.607

    HS_PEEL4(Max Load)1615 (350 fpm) NTMax Load48484gECT=75,S=1212764654Adhesive7512764654_Max Load_4Max Loadg84

    HS_PEEL3(FailureType)1615 ( 350 fpm) CFailureType30AdhesiveECT=70,S=1212766618Adhesive7012766618_FailureType_3FailureType0Adhesive

    HS_PEEL1(Seal Temp)1615 ( 350 fpm) CSeal Temp17070.0CECT=70,S=1212766618Adhesive7012766618_Seal Temp_1Seal TempC70

    HS_PEEL1(FailureType)1615 ( 350 fpm) CFailureType10AdhesiveECT=70,S=1212766618Adhesive7012766618_FailureType_1FailureType0Adhesive

    HS_PEEL1(Peel Load)1615 ( 350 fpm) CPeel Load11212gECT=70,S=1212766618Adhesive7012766618_Peel Load_1Peel Loadg12

    HS_PEEL1(Max Load)1615 ( 350 fpm) CMax Load15050gECT=70,S=1212766618Adhesive7012766618_Max Load_1Max Loadg50

    HS_PEEL1(Peel Force)1615 ( 350 fpm) CPeel Force10.0270.027lbf/inECT=70,S=1212766618Adhesive7012766618_Peel Force_1Peel Forcelbf/in0.027

    HS_PEEL1(Max Force)1615 ( 350 fpm) CMax Force10.110.110lbf/inECT=70,S=1212766618Adhesive7012766618_Max Force_1Max Forcelbf/in0.11

    HS_PEEL2(Seal Temp)1615 ( 350 fpm) CSeal Temp27070.0CECT=70,S=1212766618Adhesive7012766618_Seal Temp_2Seal TempC70

    HS_PEEL2(FailureType)1615 ( 350 fpm) CFailureType20AdhesiveECT=70,S=1212766618Adhesive7012766618_FailureType_2FailureType0Adhesive

    HS_PEEL2(Peel Load)1615 ( 350 fpm) CPeel Load222gECT=70,S=1212766618Adhesive7012766618_Peel Load_2Peel Loadg2

    HS_PEEL2(Max Load)1615 ( 350 fpm) CMax Load277gECT=70,S=1212766618Adhesive7012766618_Max Load_2Max Loadg7

    HS_PEEL2(Peel Force)1615 ( 350 fpm) CPeel Force20.0040.004lbf/inECT=70,S=1212766618Adhesive7012766618_Peel Force_2Peel Forcelbf/in0.004

    HS_PEEL2(Max Force)1615 ( 350 fpm) CMax Force20.0150.015lbf/inECT=70,S=1212766618Adhesive7012766618_Max Force_2Max Forcelbf/in0.015

    HS_PEEL3(Seal Temp)1615 ( 350 fpm) CSeal Temp37070.0CECT=70,S=1212766618Adhesive7012766618_Seal Temp_3Seal TempC70

    HS_PEEL3(Peel Load)1615 ( 350 fpm) CPeel Load311gECT=70,S=1212766618Adhesive7012766618_Peel Load_3Peel Loadg1

    HS_PEEL3(Max Load)1615 ( 350 fpm) CMax Load366gECT=70,S=1212766618Adhesive7012766618_Max Load_3Max Loadg6

    HS_PEEL4(Peel Force)1615 ( 350 fpm) CPeel Force40.0030.003lbf/inECT=70,S=1212766618Adhesive7012766618_Peel Force_4Peel Forcelbf/in0.003

    HS_PEEL4(Max Force)1615 ( 350 fpm) CMax Force40.0140.014lbf/inECT=70,S=1212766618Adhesive7012766618_Max Force_4Max Forcelbf/in0.014

    HS_PEEL5(Seal Temp)1615 ( 350 fpm) CSeal Temp57070.0CECT=70,S=1212766618Adhesive7012766618_Seal Temp_5Seal TempC70

    HS_PEEL5(FailureType)1615 ( 350 fpm) CFailureType50AdhesiveECT=70,S=1212766618Adhesive7012766618_FailureType_5FailureType0Adhesive

    HS_PEEL5(Peel Load)1615 ( 350 fpm) CPeel Load533gECT=70,S=1212766618Adhesive7012766618_Peel Load_5Peel Loadg3

    HS_PEEL5(Max Load)1615 ( 350 fpm) CMax Load51212gECT=70,S=1212766618Adhesive7012766618_Max Load_5Max Loadg12

    HS_PEEL5(Peel Force)1615 ( 350 fpm) CPeel Force50.0070.007lbf/inECT=70,S=1212766618Adhesive7012766618_Peel Force_5Peel Forcelbf/in0.007

    HS_PEEL3(Peel Force)1615 ( 350 fpm) CPeel Force30.0020.002lbf/inECT=70,S=1212766618Adhesive7012766618_Peel Force_3Peel Forcelbf/in0.002

    HS_PEEL3(Max Force)1615 ( 350 fpm) CMax Force30.0140.014lbf/inECT=70,S=1212766618Adhesive7012766618_Max Force_3Max Forcelbf/in0.014

    HS_PEEL4(Seal Temp)1615 ( 350 fpm) CSeal Temp47070.0CECT=70,S=1212766618Adhesive7012766618_Seal Temp_4Seal TempC70

    HS_PEEL4(FailureType)1615 ( 350 fpm) CFailureType40AdhesiveECT=70,S=1212766618Adhesive7012766618_FailureType_4FailureType0Adhesive

    HS_PEEL4(Peel Load)1615 ( 350 fpm) CPeel Load411gECT=70,S=1212766618Adhesive7012766618_Peel Load_4Peel Loadg1

    HS_PEEL4(Max Load)1615 ( 350 fpm) CMax Load477gECT=70,S=1212766618Adhesive7012766618_Max Load_4Max Loadg7

    HS_PEEL5(Max Force)1615 ( 350 fpm) CMax Force50.0270.027lbf/inECT=70,S=1212766618Adhesive7012766618_Max Force_5Max Forcelbf/in0.027

    HS_PEEL1(Seal Temp)1615 ( 350 fpm) CSeal Temp17575.0CECT=75,S=1212766619Adhesive7512766619_Seal Temp_1Seal TempC75

    HS_PEEL1(FailureType)1615 ( 350 fpm) CFailureType10AdhesiveECT=75,S=1212766619Adhesive7512766619_FailureType_1FailureType0Adhesive

    HS_PEEL1(Peel Load)1615 ( 350 fpm) CPeel Load1147147gECT=75,S=1212766619Adhesive7512766619_Peel Load_1Peel Loadg147

    HS_PEEL1(Peel Force)1615 ( 350 fpm) CPeel Force10.3250.325lbf/inECT=75,S=1212766619Adhesive7512766619_Peel Force_1Peel Forcelbf/in0.325

    HS_PEEL1(Max Force)1615 ( 350 fpm) CMax Force10.7130.713lbf/inECT=75,S=1212766619Adhesive7512766619_Max Force_1Max Forcelbf/in0.713

    HS_PEEL2(Seal Temp)1615 ( 350 fpm) CSeal Temp27575.0CECT=75,S=1212766619Adhesive7512766619_Seal Temp_2Seal TempC75

    HS_PEEL2(FailureType)1615 ( 350 fpm) CFailureType20AdhesiveECT=75,S=1212766619Adhesive7512766619_FailureType_2FailureType0Adhesive

    HS_PEEL2(Peel Load)1615 ( 350 fpm) CPeel Load22626gECT=75,S=1212766619Adhesive7512766619_Peel Load_2Peel Loadg26

    HS_PEEL2(Max Load)1615 ( 350 fpm) CMax Load27373gECT=75,S=1212766619Adhesive7512766619_Max Load_2Max Loadg73

    HS_PEEL2(Peel Force)1615 ( 350 fpm) CPeel Force20.0580.058lbf/inECT=75,S=1212766619Adhesive7512766619_Peel Force_2Peel Forcelbf/in0.058

    HS_PEEL2(Max Force)1615 ( 350 fpm) CMax Force20.160.160lbf/inECT=75,S=1212766619Adhesive7512766619_Max Force_2Max Forcelbf/in0.16

    HS_PEEL3(Seal Temp)1615 ( 350 fpm) CSeal Temp37575.0CECT=75,S=1212766619Adhesive7512766619_Seal Temp_3Seal TempC75

    HS_PEEL3(FailureType)1615 ( 350 fpm) CFailureType30AdhesiveECT=75,S=1212766619Adhesive7512766619_FailureType_3FailureType0Adhesive

    HS_PEEL3(Peel Load)1615 ( 350 fpm) CPeel Load31616gECT=75,S=1212766619Adhesive7512766619_Peel Load_3Peel Loadg16

    HS_PEEL3(Max Load)1615 ( 350 fpm) CMax Load35353gECT=75,S=1212766619Adhesive7512766619_Max Load_3Max Loadg53

    HS_PEEL3(Peel Force)1615 ( 350 fpm) CPeel Force30.0350.035lbf/inECT=75,S=1212766619Adhesive7512766619_Peel Force_3Peel Forcelbf/in0.035

    HS_PEEL3(Max Force)1615 ( 350 fpm) CMax Force30.1170.117lbf/inECT=75,S=1212766619Adhesive7512766619_Max Force_3Max Forcelbf/in0.117

    HS_PEEL4(Seal Temp)1615 ( 350 fpm) CSeal Temp47575.0CECT=75,S=1212766619Adhesive7512766619_Seal Temp_4Seal TempC75

    HS_PEEL1(Max Load)1615 ( 350 fpm) CMax Load1323323gECT=75,S=1212766619Adhesive7512766619_Max Load_1Max Loadg323

    HS_PEEL4(Peel Load)1615 ( 350 fpm) CPeel Load42121gECT=75,S=1212766619Adhesive7512766619_Peel Load_4Peel Loadg21

    HS_PEEL4(Max Load)1615 ( 350 fpm) CMax Load44949gECT=75,S=1212766619Adhesive7512766619_Max Load_4Max Loadg49

    HS_PEEL4(Peel Force)1615 ( 350 fpm) CPeel Force40.0450.045lbf/inECT=75,S=1212766619Adhesive7512766619_Peel Force_4Peel Forcelbf/in0.045

    HS_PEEL4(Max Force)1615 ( 350 fpm) CMax Force40.1080.108lbf/inECT=75,S=1212766619Adhesive7512766619_Max Force_4Max Forcelbf/in0.108

    HS_PEEL5(Seal Temp)1615 ( 350 fpm) CSeal Temp57575.0CECT=75,S=1212766619Adhesive7512766619_Seal Temp_5Seal TempC75

    HS_PEEL5(FailureType)1615 ( 350 fpm) CFailureType50AdhesiveECT=75,S=1212766619Adhesive7512766619_FailureType_5FailureType0Adhesive

    HS_PEEL5(Peel Load)1615 ( 350 fpm) CPeel Load54343gECT=75,S=1212766619Adhesive7512766619_Peel Load_5Peel Loadg43

    HS_PEEL5(Max Load)1615 ( 350 fpm) CMax Load5105105gECT=75,S=1212766619Adhesive7512766619_Max Load_5Max Loadg105

    HS_PEEL5(Peel Force)1615 ( 350 fpm) CPeel Force50.0960.096lbf/inECT=75,S=1212766619Adhesive7512766619_Peel Force_5Peel Forcelbf/in0.096

    HS_PEEL5(Max Force)1615 ( 350 fpm) CMax Force50.2320.232lbf/inECT=75,S=1212766619Adhesive7512766619_Max Force_5Max Forcelbf/in0.232

    HS_PEEL4(FailureType)1615 ( 350 fpm) CFailureType40AdhesiveECT=75,S=1212766619Adhesive7512766619_FailureType_4FailureType0Adhesive

    HS_PEEL1(Seal Temp)1615 ( 350 fpm) CSeal Temp18080.0CECT=80,S=1212766620Delaminate8012766620_Seal Temp_1Seal TempC80

    HS_PEEL1(FailureType)1615 ( 350 fpm) CFailureType10DelaminateECT=80,S=1212766620Delaminate8012766620_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 ( 350 fpm) CPeel Load1562562gECT=80,S=1212766620Delaminate8012766620_Peel Load_1Peel Loadg562

    HS_PEEL1(Max Load)1615 ( 350 fpm) CMax Load110481048gECT=80,S=1212766620Delaminate8012766620_Max Load_1Max Loadg1048

    HS_PEEL1(Peel Force)1615 ( 350 fpm) CPeel Force11.2381.238lbf/inECT=80,S=1212766620Delaminate8012766620_Peel Force_1Peel Forcelbf/in1.238

    HS_PEEL1(Max Force)1615 ( 350 fpm) CMax Force12.3112.311lbf/inECT=80,S=1212766620Delaminate8012766620_Max Force_1Max Forcelbf/in2.311

    HS_PEEL2(Seal Temp)1615 ( 350 fpm) CSeal Temp28080.0CECT=80,S=1212766620Delaminate8012766620_Seal Temp_2Seal TempC80

    HS_PEEL2(FailureType)1615 ( 350 fpm) CFailureType20DelaminateECT=80,S=1212766620Delaminate8012766620_FailureType_2FailureType0Delaminate

    HS_PEEL4(Seal Temp)1615 ( 350 fpm) CSeal Temp48080.0CECT=80,S=1212766620Delaminate8012766620_Seal Temp_4Seal TempC80

    HS_PEEL4(FailureType)1615 ( 350 fpm) CFailureType40DelaminateECT=80,S=1212766620Delaminate8012766620_FailureType_4FailureType0Delaminate

    HS_PEEL4(Peel Load)1615 ( 350 fpm) CPeel Load4170170gECT=80,S=1212766620Delaminate8012766620_Peel Load_4Peel Loadg170

    HS_PEEL4(Max Load)1615 ( 350 fpm) CMax Load413151315gECT=80,S=1212766620Delaminate8012766620_Max Load_4Max Loadg1315

    HS_PEEL4(Peel Force)1615 ( 350 fpm) CPeel Force40.3740.374lbf/inECT=80,S=1212766620Delaminate8012766620_Peel Force_4Peel Forcelbf/in0.374

    HS_PEEL4(Max Force)1615 ( 350 fpm) CMax Force42.8992.899lbf/inECT=80,S=1212766620Delaminate8012766620_Max Force_4Max Forcelbf/in2.899

    HS_PEEL2(Peel Load)1615 ( 350 fpm) CPeel Load2243243gECT=80,S=1212766620Delaminate8012766620_Peel Load_2Peel Loadg243

    HS_PEEL2(Max Load)1615 ( 350 fpm) CMax Load214281428gECT=80,S=1212766620Delaminate8012766620_Max Load_2Max Loadg1428

    HS_PEEL2(Peel Force)1615 ( 350 fpm) CPeel Force20.5350.535lbf/inECT=80,S=1212766620Delaminate8012766620_Peel Force_2Peel Forcelbf/in0.535

    HS_PEEL2(Max Force)1615 ( 350 fpm) CMax Force23.1493.149lbf/inECT=80,S=1212766620Delaminate8012766620_Max Force_2Max Forcelbf/in3.149

    HS_PEEL3(Seal Temp)1615 ( 350 fpm) CSeal Temp38080.0CECT=80,S=1212766620Delaminate8012766620_Seal Temp_3Seal TempC80

    HS_PEEL3(FailureType)1615 ( 350 fpm) CFailureType30DelaminateECT=80,S=1212766620Delaminate8012766620_FailureType_3FailureType0Delaminate

    HS_PEEL3(Peel Load)1615 ( 350 fpm) CPeel Load3538538gECT=80,S=1212766620Delaminate8012766620_Peel Load_3Peel Loadg538

    HS_PEEL3(Max Load)1615 ( 350 fpm) CMax Load3850850gECT=80,S=1212766620Delaminate8012766620_Max Load_3Max Loadg850

    HS_PEEL3(Peel Force)1615 ( 350 fpm) CPeel Force31.1871.187lbf/inECT=80,S=1212766620Delaminate8012766620_Peel Force_3Peel Forcelbf/in1.187

    HS_PEEL3(Max Force)1615 ( 350 fpm) CMax Force31.8741.874lbf/inECT=80,S=1212766620Delaminate8012766620_Max Force_3Max Forcelbf/in1.874

    HS_PEEL5(FailureType)1615 ( 350 fpm) CFailureType50DelaminateECT=80,S=1212766620Delaminate8012766620_FailureType_5FailureType0Delaminate

    HS_PEEL5(Peel Load)1615 ( 350 fpm) CPeel Load5477477gECT=80,S=1212766620Delaminate8012766620_Peel Load_5Peel Loadg477

    HS_PEEL5(Max Load)1615 ( 350 fpm) CMax Load512541254gECT=80,S=1212766620Delaminate8012766620_Max Load_5Max Loadg1254

    HS_PEEL5(Peel Force)1615 ( 350 fpm) CPeel Force51.0511.051lbf/inECT=80,S=1212766620Delaminate8012766620_Peel Force_5Peel Forcelbf/in1.051

    HS_PEEL5(Max Force)1615 ( 350 fpm) CMax Force52.7652.765lbf/inECT=80,S=1212766620Delaminate8012766620_Max Force_5Max Forcelbf/in2.765

    HS_PEEL5(Seal Temp)1615 ( 350 fpm) CSeal Temp58080.0CECT=80,S=1212766620Delaminate8012766620_Seal Temp_5Seal TempC80

    HS_PEEL1(Seal Temp)1615 ( 350 fpm) CSeal Temp18585.0CECT=85,S=1212766621Delaminate8512766621_Seal Temp_1Seal TempC85

    HS_PEEL1(FailureType)1615 ( 350 fpm) CFailureType10DelaminateECT=85,S=1212766621Delaminate8512766621_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 ( 350 fpm) CPeel Load1518518gECT=85,S=1212766621Delaminate8512766621_Peel Load_1Peel Loadg518

    HS_PEEL1(Max Load)1615 ( 350 fpm) CMax Load1909909gECT=85,S=1212766621Delaminate8512766621_Max Load_1Max Loadg909

    HS_PEEL1(Peel Force)1615 ( 350 fpm) CPeel Force11.1421.142lbf/inECT=85,S=1212766621Delaminate8512766621_Peel Force_1Peel Forcelbf/in1.142

    HS_PEEL1(Max Force)1615 ( 350 fpm) CMax Force12.0032.003lbf/inECT=85,S=1212766621Delaminate8512766621_Max Force_1Max Forcelbf/in2.003

    HS_PEEL2(Seal Temp)1615 ( 350 fpm) CSeal Temp28585.0CECT=85,S=1212766621Delaminate8512766621_Seal Temp_2Seal TempC85

    HS_PEEL2(FailureType)1615 ( 350 fpm) CFailureType20DelaminateECT=85,S=1212766621Delaminate8512766621_FailureType_2FailureType0Delaminate

    HS_PEEL2(Peel Load)1615 ( 350 fpm) CPeel Load2497497gECT=85,S=1212766621Delaminate8512766621_Peel Load_2Peel Loadg497

    HS_PEEL2(Max Load)1615 ( 350 fpm) CMax Load210591059gECT=85,S=1212766621Delaminate8512766621_Max Load_2Max Loadg1059

    HS_PEEL2(Peel Force)1615 ( 350 fpm) CPeel Force21.0961.096lbf/inECT=85,S=1212766621Delaminate8512766621_Peel Force_2Peel Forcelbf/in1.096

    HS_PEEL2(Max Force)1615 ( 350 fpm) CMax Force22.3342.334lbf/inECT=85,S=1212766621Delaminate8512766621_Max Force_2Max Forcelbf/in2.334

    HS_PEEL3(Seal Temp)1615 ( 350 fpm) CSeal Temp38585.0CECT=85,S=1212766621Delaminate8512766621_Seal Temp_3Seal TempC85

    HS_PEEL3(FailureType)1615 ( 350 fpm) CFailureType30DelaminateECT=85,S=1212766621Delaminate8512766621_FailureType_3FailureType0Delaminate

    HS_PEEL3(Peel Load)1615 ( 350 fpm) CPeel Load3613613gECT=85,S=1212766621Delaminate8512766621_Peel Load_3Peel Loadg613

    HS_PEEL4(Peel Force)1615 ( 350 fpm) CPeel Force41.2261.226lbf/inECT=85,S=1212766621Delaminate8512766621_Peel Force_4Peel Forcelbf/in1.226

    HS_PEEL4(Max Force)1615 ( 350 fpm) CMax Force42.1532.153lbf/inECT=85,S=1212766621Delaminate8512766621_Max Force_4Max Forcelbf/in2.153

    HS_PEEL3(Max Load)1615 ( 350 fpm) CMax Load310541054gECT=85,S=1212766621Delaminate8512766621_Max Load_3Max Loadg1054

    HS_PEEL3(Peel Force)1615 ( 350 fpm) CPeel Force31.3521.352lbf/inECT=85,S=1212766621Delaminate8512766621_Peel Force_3Peel Forcelbf/in1.352

    HS_PEEL3(Max Force)1615 ( 350 fpm) CMax Force32.3242.324lbf/inECT=85,S=1212766621Delaminate8512766621_Max Force_3Max Forcelbf/in2.324

    HS_PEEL4(Seal Temp)1615 ( 350 fpm) CSeal Temp48585.0CECT=85,S=1212766621Delaminate8512766621_Seal Temp_4Seal TempC85

    HS_PEEL4(FailureType)1615 ( 350 fpm) CFailureType40DelaminateECT=85,S=1212766621Delaminate8512766621_FailureType_4FailureType0Delaminate

    HS_PEEL4(Peel Load)1615 ( 350 fpm) CPeel Load4556556gECT=85,S=1212766621Delaminate8512766621_Peel Load_4Peel Loadg556

    HS_PEEL4(Max Load)1615 ( 350 fpm) CMax Load4977977gECT=85,S=1212766621Delaminate8512766621_Max Load_4Max Loadg977

    HS_PEEL5(FailureType)1615 ( 350 fpm) CFailureType50DelaminateECT=85,S=1212766621Delaminate8512766621_FailureType_5FailureType0Delaminate

    HS_PEEL5(Peel Load)1615 ( 350 fpm) CPeel Load5368368gECT=85,S=1212766621Delaminate8512766621_Peel Load_5Peel Loadg368

    HS_PEEL5(Max Load)1615 ( 350 fpm) CMax Load511921192gECT=85,S=1212766621Delaminate8512766621_Max Load_5Max Loadg1192

    HS_PEEL5(Peel Force)1615 ( 350 fpm) CPeel Force50.8110.811lbf/inECT=85,S=1212766621Delaminate8512766621_Peel Force_5Peel Forcelbf/in0.811

    HS_PEEL5(Max Force)1615 ( 350 fpm) CMax Force52.6292.629lbf/inECT=85,S=1212766621Delaminate8512766621_Max Force_5Max Forcelbf/in2.629

    HS_PEEL5(Seal Temp)1615 ( 350 fpm) CSeal Temp58585.0CECT=85,S=1212766621Delaminate8512766621_Seal Temp_5Seal TempC85

    HS_PEEL1(Seal Temp)1615 ( 350 fpm) CSeal Temp19090.0CECT=90,S=1212766622Delaminate9012766622_Seal Temp_1Seal TempC90

    HS_PEEL1(FailureType)1615 ( 350 fpm) CFailureType10DelaminateECT=90,S=1212766622Delaminate9012766622_FailureType_1FailureType0Delaminate

    HS_PEEL1(Peel Load)1615 ( 350 fpm) CPeel Load1398398gECT=90,S=1212766622Delaminate9012766622_Peel Load_1Peel Loadg398

    HS_PEEL1(Max Load)1615 ( 350 fpm) CMax Load110511051gECT=90,S=1212766622Delaminate9012766622_Max Load_1Max Loadg1051

    HS_PEEL1(Peel Force)1615 ( 350 fpm) CPeel Force10.8770.877lbf/inECT=90,S=1212766622Delaminate9012766622_Peel Force_1Peel Forcelbf/in0.877

    HS_PEEL1(Max Force)1615 ( 350 fpm) CMax Force12.3172.317lbf/inECT=90,S=1212766622Delaminate9012766622_Max Force_1Max Forcelbf/in2.317

    HS_PEEL2(Seal Temp)1615 ( 350 fpm) CSeal Temp29090.0CECT=90,S=1212766622Delaminate9012766622_Seal Temp_2Seal TempC90

    HS_PEEL2(FailureType)1615 ( 350 fpm) CFailureType20DelaminateECT=90,S=1212766622Delaminate9012766622_FailureType_2FailureType0Delaminate

    HS_PEEL2(Peel Load)1615 ( 350 fpm) CPeel Load2695695gECT=90,S=1212766622Delaminate9012766622_Peel Load_2Peel Loadg695

    HS_PEEL4(Peel Load)1615 ( 350 fpm) CPeel Load4610610gECT=90,S=1212766622Delaminate9012766622_Peel Load_4Peel Loadg610

    HS_PEEL4(Max Load)1615 ( 350 fpm) CMax Load411171117gECT=90,S=1212766622Delaminate9012766622_Max Load_4Max Loadg1117

    HS_PEEL4(Peel Force)1615 ( 350 fpm) CPeel Force41.3451.345lbf/inECT=90,S=1212766622Delaminate9012766622_Peel Force_4Peel Forcelbf/in1.345

    HS_PEEL4(Max Force)1615 ( 350 fpm) CMax Force42.4622.462lbf/inECT=90,S=1212766622Delaminate9012766622_Max Force_4Max Forcelbf/in2.462

    HS_PEEL2(Max Load)1615 ( 350 fpm) CMax Load2928928gECT=90,S=1212766622Delaminate9012766622_Max Load_2Max Loadg928

    HS_PEEL2(Peel Force)1615 ( 350 fpm) CPeel Force21.5321.532lbf/inECT=90,S=1212766622Delaminate9012766622_Peel Force_2Peel Forcelbf/in1.532

    HS_PEEL2(Max Force)1615 ( 350 fpm) CMax Force22.0452.045lbf/inECT=90,S=1212766622Delaminate9012766622_Max Force_2Max Forcelbf/in2.045

    HS_PEEL3(Seal Temp)1615 ( 350 fpm) CSeal Temp39090.0CECT=90,S=1212766622Delaminate9012766622_Seal Temp_3Seal TempC90

    HS_PEEL3(FailureType)1615 ( 350 fpm) CFailureType30DelaminateECT=90,S=1212766622Delaminate9012766622_FailureType_3FailureType0Delaminate

    HS_PEEL3(Peel Load)1615 ( 350 fpm) CPeel Load3608608gECT=90,S=1212766622Delaminate9012766622_Peel Load_3Peel Loadg608

    HS_PEEL3(Max Load)1615 ( 350 fpm) CMax Load3981981gECT=90,S=1212766622Delaminate9012766622_Max Load_3Max Loadg981

    HS_PEEL3(Peel Force)1615 ( 350 fpm) CPeel Force31.341.340lbf/inECT=90,S=1212766622Delaminate9012766622_Peel Force_3Peel Forcelbf/in1.34

    HS_PEEL3(Max Force)1615 ( 350 fpm) CMax Force32.1642.164lbf/inECT=90,S=1212766622Delaminate9012766622_Max Force_3Max Forcelbf/in2.164

    HS_PEEL4(Seal Temp)1615 ( 350 fpm) CSeal Temp49090.0CECT=90,S=1212766622Delaminate9012766622_Seal Temp_4Seal TempC90

    HS_PEEL4(FailureType)1615 ( 350 fpm) CFailureType40DelaminateECT=90,S=1212766622Delaminate9012766622_FailureType_4FailureType0Delaminate

    HS_PEEL5(FailureType)1615 ( 350 fpm) CFailureType50DelaminateECT=90,S=1212766622Delaminate9012766622_FailureType_5FailureType0Delaminate

    HS_PEEL5(Peel Load)1615 ( 350 fpm) CPeel Load5131131gECT=90,S=1212766622Delaminate9012766622_Peel Load_5Peel Loadg131

    HS_PEEL5(Max Load)1615 ( 350 fpm) CMax Load516601660gECT=90,S=1212766622Delaminate9012766622_Max Load_5Max Loadg1660

    HS_PEEL5(Peel Force)1615 ( 350 fpm) CPeel Force50.2880.288lbf/inECT=90,S=1212766622Delaminate9012766622_Peel Force_5Peel Forcelbf/in0.288

    HS_PEEL5(Max Force)1615 ( 350 fpm) CMax Force53.663.660lbf/inECT=90,S=1212766622Delaminate9012766622_Max Force_5Max Forcelbf/in3.66

    HS_PEEL5(Seal Temp)1615 ( 350 fpm) CSeal Temp59090.0CECT=90,S=1212766622Delaminate9012766622_Seal Temp_5Seal TempC90

    HS_PEEL1(Seal Temp)1615 ( 350 fpm) CSeal Temp19595.0CECT=95,S=1212766623Delaminate9512766623_Seal Temp_1Seal TempC95


CORONA & PLASMA - · PDF fileCorona & Plasma for EXTRUSION Corona treatment = perfect adhesion ... Explains Vice President at Kung Hsing Plastic Machinery Co. Ltd Mr. Kun-Lin Tsai,

CORONA & PLASMA - · PDF fileCorona & Plasma for EXTRUSION Corona treatment = perfect adhesion ... Explains Vice President at Kung Hsing Plastic Machinery Co. Ltd Mr. Kun-Lin Tsai,

EXTRUSION CROSSHEADS & TOOLING – EXTRUSION EQUIPMENT · 2013. 2. 23. · V06-2009 EXTRUSION CROSSHEADS & TOOLING – EXTRUSION EQUIPMENT Your productivity guaranteed CH - 1429 Giez

EXTRUSION CROSSHEADS & TOOLING – EXTRUSION EQUIPMENT · 2013. 2. 23. · V06-2009 EXTRUSION CROSSHEADS & TOOLING – EXTRUSION EQUIPMENT Your productivity guaranteed CH - 1429 Giez

Design for Material Extrusion on Mesh Fabrics · adhesion and 3D printed structures stability on the fabric (Table 2). Meanwhile, the warping, linear surface structure finishing and

Design for Material Extrusion on Mesh Fabrics · adhesion and 3D printed structures stability on the fabric (Table 2). Meanwhile, the warping, linear surface structure finishing and

Newman Variable Extrusion Moistureceramics.org/.../05/newman-variable-extrusion-moisture.pdf · 2019-09-13 · “The Effects of Variable Extrusion Moisture on Extrusion, Drying,

Newman Variable Extrusion Moistureceramics.org/.../05/newman-variable-extrusion-moisture.pdf · 2019-09-13 · “The Effects of Variable Extrusion Moisture on Extrusion, Drying,

New Extrusion Coating Primers for Achieving EVA Adhesion ... · Figure 2. Comparison of Primer R with PEI and no primer 50µ BOPET/primer/EVA extrudate (no ozone) 0.00 0.50 1.00 1.50

New Extrusion Coating Primers for Achieving EVA Adhesion ... · Figure 2. Comparison of Primer R with PEI and no primer 50µ BOPET/primer/EVA extrudate (no ozone) 0.00 0.50 1.00 1.50

Extrusion Processing Technology: Food and Non-Food ... · Extrusion Processing Technology Extrusion Processing Technology Food and Non-Food Biomaterials Extrusion is the operation

Extrusion Processing Technology: Food and Non-Food ... · Extrusion Processing Technology Extrusion Processing Technology Food and Non-Food Biomaterials Extrusion is the operation

Emmett Yu - Adhesion in Extrusion Coating -English...BON films: 5 – 15 WD Corona Treatment of Films Use Proper Watt-Density Other Treatment Methods • Flame – proper air/gas ratio

Emmett Yu - Adhesion in Extrusion Coating -English...BON films: 5 – 15 WD Corona Treatment of Films Use Proper Watt-Density Other Treatment Methods • Flame – proper air/gas ratio

CoPolymers in Extrusion Coating What, Why, Where? · CoPolymers in Extrusion Coating What, Why, Where? Presented by: ... LDPE x x xx x X XX XXXX XX mLLDPE xx x x xx X X X X EVA xx

CoPolymers in Extrusion Coating What, Why, Where? · CoPolymers in Extrusion Coating What, Why, Where? Presented by: ... LDPE x x xx x X XX XXXX XX mLLDPE xx x x xx X X X X EVA xx

Adhesion Rubber Roughness Pre- Adhesion of Rubber on ...

Adhesion Rubber Roughness Pre- Adhesion of Rubber on ...

High Performance Extrusion Coating EVA with Low Temperature … · 2006-12-09 · Introduction What is Thermal Lamination Film ? Step 1: LDPE or EVA is extruded onto substrate film

High Performance Extrusion Coating EVA with Low Temperature … · 2006-12-09 · Introduction What is Thermal Lamination Film ? Step 1: LDPE or EVA is extruded onto substrate film

Apicobasal Polarity Controls Lymphocyte Adhesion to Hepatic Epithelial Cells Natalia Reglero-Real, Adrián Álvarez-Varela, Eva Cernuda-Morollón, Jorge Feito,

Apicobasal Polarity Controls Lymphocyte Adhesion to Hepatic Epithelial Cells Natalia Reglero-Real, Adrián Álvarez-Varela, Eva Cernuda-Morollón, Jorge Feito,

9/25/2005 - 9/28/2005 Caesar's Palace Las Vegas, NV - TAPPI...Understanding Why Adhesion in Extrusion Coating Decreases with Diminishing Coating Thickness, Part I: Penetration of Porous

9/25/2005 - 9/28/2005 Caesar's Palace Las Vegas, NV - TAPPI...Understanding Why Adhesion in Extrusion Coating Decreases with Diminishing Coating Thickness, Part I: Penetration of Porous

New Extrusion Coating Primers for Achieving EVA … Extrusion Coating Primers for Achieving EVA Adhesion to Film and Aluminum Foil Substrates Ginger Cushing Richard Allen, Ph.D. Mica

New Extrusion Coating Primers for Achieving EVA … Extrusion Coating Primers for Achieving EVA Adhesion to Film and Aluminum Foil Substrates Ginger Cushing Richard Allen, Ph.D. Mica

Extrusion | TissueMaster Conceptcms.kometdental.de/.../media/411958V0_BRO_EN_TMC_Extrusion.pdf · Extrusion | TissueMaster Concept Extraction, Replantation, Extrusion, Implantation

Extrusion | TissueMaster Conceptcms.kometdental.de/.../media/411958V0_BRO_EN_TMC_Extrusion.pdf · Extrusion | TissueMaster Concept Extraction, Replantation, Extrusion, Implantation

SOLVING ADHESION AND DIE BUILDUP PROBLEMS IN …a slower rate than C, and the result is a product that adequately survives the extrusion process. CONCLUSION These examples illustrate

SOLVING ADHESION AND DIE BUILDUP PROBLEMS IN …a slower rate than C, and the result is a product that adequately survives the extrusion process. CONCLUSION These examples illustrate

Extrusion Process - s3.amazonaws.coms3.amazonaws.com/gw_specattrimage/98098385_1163021_Tech-Cap... · Extrusion Process . Extrusion Equipment . Extrusion • Basics • Blown •

Extrusion Process - s3.amazonaws.coms3.amazonaws.com/gw_specattrimage/98098385_1163021_Tech-Cap... · Extrusion Process . Extrusion Equipment . Extrusion • Basics • Blown •

NEW PACKAGING SOLUTION FOR EXTRUSION LAMINATION …adhesion. In particular, weak bonding forces between film layers and therefore potential delamination (poor adhesion) represent a

NEW PACKAGING SOLUTION FOR EXTRUSION LAMINATION …adhesion. In particular, weak bonding forces between film layers and therefore potential delamination (poor adhesion) represent a

Adhesion molecules and inflammation: Introduction · Adhesion molecules and inflammation: Introduction Inflammation is a disease where cell adhesion plays a critical role. Cell adhesion

Adhesion molecules and inflammation: Introduction · Adhesion molecules and inflammation: Introduction Inflammation is a disease where cell adhesion plays a critical role. Cell adhesion

Module Encapsulation Materials, Processing and Testing ... · PDF fileBased on Module Design and Construction ... Mechanical Tester Tensile Test 90. o. Peel Test T-Peel Test. EVA Adhesion

Module Encapsulation Materials, Processing and Testing ... · PDF fileBased on Module Design and Construction ... Mechanical Tester Tensile Test 90. o. Peel Test T-Peel Test. EVA Adhesion

PHARMA EXTRUSION ACADEMY - SC- · PDF file↗ Nuremberg, Germany. PHARMA EXTRUSION ACADEMY Understanding Pharmaceutical Extrusion Technology ... The Leistritz Pharma Extrusion Academy

PHARMA EXTRUSION ACADEMY - SC- · PDF file↗ Nuremberg, Germany. PHARMA EXTRUSION ACADEMY Understanding Pharmaceutical Extrusion Technology ... The Leistritz Pharma Extrusion Academy