We Manage Voltage You Save Energy.

EDITELEKTRONiK

IMP-IMPR - 3P15 SERIESSTATIC ELECTRONIC VOLTAGE STABILIZER

EDIT ELEKTRONIK Sistemleri San. Tic. Ltd. Şti. Meclis Mah. Ahmet Taner Kışlalı Cad. No:25 34785

Sancaktepe - Istanbul / Turkey

editelektronik.com.trvor.com.trPhone: + 90 216 622 62 22 (pbx) Fax : + 90 216 622 62 31

15 kVA Single Line Diagram

BY-PASS MODE

INPUTNEUTRAL

OUTPUTNEUTRAL

INPUTPHASE

OUTPUTCONTACTOR

NORMAL MODE

MANUALBY-PASS SWITCH

OUTPUTPHASE

THYRISTOR THYRISTOR

REGULATOR TRANSFORMER

INPUT CB

Power : 15 kVAInput Voltage Range : (±%5 up to ±%60)Smart voltage regulation softwareHigh speed voltage regulation (500V/sec.)High efficiency (97%)Protection against over load, over temperature, high voltage,low voltage and other failures. Designed for heavy duty industrial working conditionsMaintenance free electronic voltage management technology.Fast voltage correction for sag and swells in voltage Built in surge arrester for surges and sags Independent phase regulation to correct voltage and load imbalanceSelf test facility LCD Display for easy monitoring

EDITELEKTRONiK

EDIT ELEKTRONIK Sistemleri San. Tic. Ltd. Şti. Meclis Mah. Ahmet Taner Kışlalı Cad. No:25 34785

Sancaktepe - Istanbul / Turkey

editelektronik.com.trvor.com.trPhone: + 90 216 622 62 22 (pbx) Fax : + 90 216 622 62 31

IMP - IMPR SERIES STATIC ELECTRONIC VOLTAGE STABILIZER

STRUCTURAL SPECIFICATIONSPRODUCT SPECIFICATIONSWHAT IS STATIC VOLTAGE STABILIZER?

IMP-IMPR Static Voltage Stabilizers are the devices for voltage control, protection and management which are microprocessor controlled, and have high speed semiconductor technology. They are adjusted to the right voltage value required by industrial devices which develop rapidly and become more sensitive; and they are designed to meet their continuous, settled and secure energy requirements.

WHAT ARE THE APPLICATION FIELDS?IMP-IMPR Static Voltage Stabilizers, which can be produced in a very wide input voltage interval for places where grid voltages drop or rise excessively, evaluates grid voltage decreases and increases in 0.020 seconds when the main gid voltage drops -60% or rise +40% and corrects with 500V/sec. speed. By this means, your high cost industrial devices are protected against dangerous voltage changes and also it enables your systems to work with high efficiency and without interruption.

HOW DO WE DESIGN?IMP-IMPR Static Voltage Stabilizers are designed with its compact, aesthetic and modular structure, in sucha way that it can be easily connected with electric systems everywhere in the world. “BUS-BAR PANEL INPUT-OUTPUT MODULE” which is required for direct connection can be added to BUS BAR systems optionally on request. Information such as Input Voltage, Output Voltae, and Load percentage etc. can be viewed; breakdown and warning information can be followed on LCD DISPLAY which is standard in IMP-IMPR SVS. One may reach devices over on the web, view all information on LCD DISPLAY and change setting values of the device with optional “REMOTE VIEWING AND MANAGEMENT UNIT”.

HOW DO WE PROTECT YOUR MACHINES?IMP-IMPR Static Voltage Stabilizers high Hige Voltage, Low Voltage, Over-temperature, Overload, Short Circuit and Phase Break protections for its own operating safety and also for all electronic devices in your business to work safely. There is a “Manual By-pass” unit which enables the loads to be transferred directly to network voltage for providing usage flexibility and working safety. It is equipped with thermomagnetic fuses in its input and output terminals.

■ 2k A - 3200kVA with single phase and three phase outputs■ All industrial voltage value(208 - 380 - 400 - 415 - 480 - 600V etc.)■ Wide input voltage range up to -65% / +45■ Maintenance-free new technology withMicroprocessor controller■ High speed regulation (500 V/sec., (Optional fullregulation up to 3 cycles) )■ High Efficiency (97%)■ CPU controlled thyristor units for power managemen■ Protection against over load, over temperature, highvoltage, low voltage etc.■ Flexible design and software property that can easilyorient itself to different grid and voltage conditions■ On / Off and manual by-pass switch for workingthrough aid, in cases where malfunction happens orwhen maintenance is required■ Real static-modular design with THYRISTOR technologyused in power units and SMPS technology in feeding units■ “Remote Management System” and software supportby which the user can remotely view manage all ofthis information■ Production according to ISO 9001:2008 QualityManagement System■ New technological design that is suitable for industriaenvironments like very dusty conditions, humidity and vibration■ Maintenance free design■ Safe usage for all electrical device■ Minimal size, long life■ User friendly , easy and comprehensive LCD Displayand mimic diagram■ Compact structure with high quality material anminimum malfunction hazard■ Sure Arrester against sudden voltage increases andstreaks lightning■ Spare part providing guarantee for 10 year■ Parallel connection for special high power application■ Self test facility

30A

EDITELEKTRONiK

EDIT ELEKTRONIK Sistemleri San. Tic. Ltd. Şti. Meclis Mah. Ahmet Taner Kışlalı Cad. No:25 34785

Sancaktepe - Istanbul / Turkey

editelektronik.com.trvor.com.trPhone: + 90 216 622 62 22 (pbx) Fax : + 90 216 622 62 31

TECHNICAL SPECIFICATIONS OF IMP-IMPR MODEL THREE PHASE STATIC VOLTAGE STABILIZERS

MODEL

POWER (kVA) 15

Power Factor 1

INPUT

Voltage

Voltage Tolerance

Frequency 50Hz ± 5%

Input Connection Screw Terminal

OUTPUT

VoltageSCR Module

Voltage Tolerance

Frequency 50 Hz ± 5%

Current 22A

Overload Capability 101%-125% 3 min., 126%-150% 10 sec., 151% load 0,2 sec., after then output shut-off

Response Time 5-20 msec

Correction Speed 500 V/sec (Optional full regulation up to 3 cycles)Efficiency > 97% typical

Output Connection Screw Terminal

LCD Display Input Voltage Value, Output Voltage Value, Output Load Percent, Output Frequency, Stabilizer Condition and Failure Info, Warnings (Overload, over temperature, input failure, output failure, etc)

Communication

PROTECTION

Input Voltage Protection Stabilizer shut off electronically under / over voltage

Output Voltage Protection Stabilizer shut off electronically under / over voltage

Input Current Protection MCB (optional)

Output Current Protection MCB (optional)

Output Overload Protection 101%-125% 3 min., 126%-150% 10 sec., %151-%200 load 0,2 sec., above %200 immediately output shut-off

Over Temperature Protection Stabilizer shut off for over - temperature

Manual By-Pass Switch

Surge Arrester Suitable surge arrester unit for lightning and high voltage (optional)

ENVIRONMENTAL CONDITIONS

Operating Temperature -10 °C ~ +40 °C (optional cooling units on request)

Altitude < 3000 m

Humidity 90% none condensed

Acoustic Noise < 45 dB

CABINET SPECIFICATIONS

Type Indoor

Protection Class IP 21 (optional outdoor cabinets on request)Color RAL 7035

Base Wheel / Plinth

Cooling Air forced Fans

*Dimensions (WxDxH) cm 35x80x80

*Weight (kg) 120 125 142 155

IMP-3P15 IMPR-3P15

XS(-15%,+15%) S (-25%,+15%) M (-35%,+15%) L (-50%,+15%)

3TT 4TT 5TT

%3 %1,5 %1

3TT 4TT 5TT

%4 %2 %1,5

3TT 4TT 5TT

%5 %3 %2

3TT 4TT 5TT

%7 %5 %3

Current 26A 35A 45A22A 22A 22A 22A

Remote monitoring and management via Ethernet interface (optional) MOD-BUS RTU with RS485 interface (optional) Dry Contact Information (optional)

Manual bypass for faults and maintenance (optional)

380 V AC phase + neutral (Other grid voltage optional)

380 V AC phase + neutral (Other grid voltage optional)

35x80x80 35x80x80 35x80x80

*These are estimated weight and dimensions. We are going to give the exact dimension and weight after we finish the production.

EDITELEKTRONiK

EDIT ELEKTRONIK Sistemleri San. Tic. Ltd. Şti. Meclis Mah. Ahmet Taner Kışlalı Cad. No:25 34785

Sancaktepe - Istanbul / Turkey

editelektronik.com.trvor.com.trPhone: + 90 216 622 62 22 (pbx) Fax : + 90 216 622 62 31

EDITELEKTRONiK

EDIT ELEKTRONIK Sistemleri San. Tic. Ltd. Şti. Meclis Mah. Ahmet Taner Kışlalı Cad. No:25 34785

Sancaktepe - Istanbul / Turkey

editelektronik.com.trvor.com.trPhone: + 90 216 622 62 22 (pbx) Fax : + 90 216 622 62 31

VOLTAGE STABILIZER ORDERING CODE INFORMATION

CODE TABLE -1 (STANDARD SPECIFICATION)

VOR - 3P 1250 - XS 380STABILIZER MODELSVOR :Parallel Redundant Voltage Stabilizer IMP :High PerformanceIMPR :Cost EffectiveESV :Electro Mechanic

PHASE QUANTITY 1P :Single Phase 2P :Dual Phase 3P :Three Phase

POWER RANGE 01 kVA - 3200 kVA

SML

INPUT VOLTAGE RANGE

XS :Vnominal -%15 - Vnominal +%15:Vnominal -%25 - Vnominal +%15:Vnominal -%35 - Vnominal +%15:Vnominal -%50 - Vnominal +%15

XL :Vnominal -%60 - Vnominal +%15

AVAILABLE NOMINAL VOLTAGE220 :220VAC 1P+N or 3P+N380 :380VAC 3P+N400 :400VAC 3P+N415 :415VAC 3P+N480 :480VAC 3P+N600 :600VAC 3P+N

EDITELEKTRONiK

EDIT ELEKTRONIK Sistemleri San. Tic. Ltd. Şti. Meclis Mah. Ahmet Taner Kışlalı Cad. No:25 34785

Sancaktepe - Istanbul / Turkey

editelektronik.com.trvor.com.trPhone: + 90 216 622 62 22 (pbx) Fax : + 90 216 622 62 31

VOLTAGE STABILIZER ORDERING CODE INFORMATION

CODE TABLE -2 (OPTIONAL SPECIFICATION)

VOR - 3P 1250 - XS 380 - 4CT - ABP - ICB - RMU

THYRISTOR CONFIGURATION AND QUANTITY

Order Code Input Voltage Range

Output Voltage Tolerance

3TT - 3CT4TT - 4CT5TT - 5CT

XS :-%15+%15XS :-%15+%15XS :-%15+%15

3TT - 3CT S :-%25+%154TT - 4CT S :-%25+%155TT - 5CT S :-%25+%15

3TT - 3CT M :-%35+%154TT - 4CT M :-%35+%155TT - 5CT M :-%35+%15

3TT - 3CT L :-%50+%154TT - 4CT L :-%50+%155TT - 5CT L :-%50+%15

3TT - 3CT4TT - 4CT5TT - 5CT

XL :-%60+%15XL :-%60+%15XL :-%60+%15

The output voltage tolerance table for each thyristorconfiguration in the different input voltage range is as follows.

ABP :Automatic By-Pass Unit IBP :Internal By-Pass Unit MBP :Manual By-Pass Unit

ICB :Input Circuit Breaker OCB :Output Circuit Breaker

RMU :Remote Management Unit RLC :Relay Alarm Contact

±%2±%1±%0,5

±%3±%2±%1

±%4±%3±%2

±%5±%4±%3

±%6±%4±%3