IMM Katalog Fasergeraete
-
Upload
sumeet-sharma-a -
Category
Documents
-
view
219 -
download
0
Transcript of IMM Katalog Fasergeraete
-
8/13/2019 IMM Katalog Fasergeraete
1/21
Fiber Optic Fault Locators and Accessories
Made in Germany
Release 2011
-
8/13/2019 IMM Katalog Fasergeraete
2/21
18
171
Parameter Min. Typ. Max.
Wavelength 635 nm
(Singlemode fiber 9/125 m) 500 W 700 W
(Multimode fiber 50/125 m) 500 W 800 W
Operation temperature - 10 C 45 C
Storage temperature - 40 C 70 C
1Operation time - one battery pack (Pulsed mode) 40 hours
Battery type AAA
Optical output power 1 mW
Retention force for ferrule 1 - 2 N
Laser protection class 2
Operation mode pulsed mode:frequency 2 - 3 Hz
Weight incl. batteries 100 g
Fiber coupled power
Operation current 40 mA
D (mm)
L (mm)
L
Suitable ferrule 2.5 mm DIN, E2000, FC, SC, ST
D
L
Patented universalport 2.5 mm
FIBERPOINT 250Part
Number: 1401000002
- 2 - [email protected]
Made in GermanyFiber Optic Fault Locator
1)Battery: VARTA Industrial Alkaline No. 4003;1.5 V; AAA; LR03 Micro; AM4; MN2400
Notes: Do not use rechargeable batteries.Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)The above product specifications are subject to change without notice.
Applications:
- Dust cap- One battery pack- Instruction manual- Quadrosafe economy plastic shipping box
Included in delivery:
Accessories (not included):
- The compact design of the visual fault locator is very suitable for daily usein all fiber optic applications e.g.inthe field,in industrial environment as well as in laboratory.
- To check singlemode/multimodeoptical fibers and
other fiber optic components on faults.- Patching of fibers.
- Adapters please see page 8/9 this brochure
- Private labelling is available instead of stamping FIBERPOINT 250
- One-time charge applies- Minimum order quantity applies
Feature:
-
8/13/2019 IMM Katalog Fasergeraete
3/21
18
171
D (mm)
L (mm)
FIBERPOINT 250DPart
Number: 1401000013
D
L
Parameter Min. Typ. Max.
Wavelength 635 nm
(Singlemode fiber 9/125 m) 500 W 700 W
(Multimode fiber 50/125 m) 500 W 800 W
Operation temperature - 10 C 45 C
Storage temperature - 40 C 70 C
1Operation time - one battery pack (Pulsed mode) 40 hours
Battery type AAA
Optical output power 1 mW
Retention force for ferrule 1 - 2 N
Laser protection class 2
Operation mode continuous wave
Weight incl. batteries 100 g
Fiber coupled power
Operation current 40 mA
Suitable ferrule 2.5 mm DIN, E2000, FC, SC, ST
- 3 - [email protected]
Made in GermanyFiber Optic Fault Locator
1)Battery: VARTA Industrial Alkaline No. 4003;1.5 V; AAA; LR03 Micro; AM4; MN2400
Notes: Do not use rechargeable batteries.Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)The above product specifications are subject to change without notice.
Applications: - The compact design of the visual fault locator is very suitable for daily usein all fiber optic applications e.g.inthe field,in industrial environment as well as in laboratory.
- To check singlemode/multimodeoptical fibers and
other fiber optic components on faults.- Patching of fibers.
- Dust cap- One battery pack- Instruction manual- Quadrosafe economy plastic shipping box
Included in delivery:
Accessories (not included): - Adapters please see page 8/9 this brochure
- Private labelling is available instead of stamping FIBERPOINT 250
- One-time charge applies- Minimum order quantity applies
Feature:
Patented universalport 2.5 mm
-
8/13/2019 IMM Katalog Fasergeraete
4/21
12
167
1)Battery: VARTA Industrial Alkaline No. 4003;1.5 V; AAA; LR03 Micro; AM4; MN2400
Parameter Min. Typ. Max.
Wavelength 635 nm
(Singlemode fiber 9/125 m) 500 W 700 W
(Multimode fiber 50/125 m) 500 W 800 W
Operation temperature - 10 C 45 C
Storage temperature - 40 C 70 C
1Operation time - one battery pack (Pulsed mode) 40 hours
Battery type AAA
Optical output power 1 mW
Retention force for ferrule 1 - 2 N
Laser protection class 2
Operation mode continuous wave; pulsed mode: frequency 2 - 3 Hz
Weight incl. batteries 60 g
- Dust cap- One battery pack- Instruction manual
Included in delivery:
Fiber coupled power
Operation current 40 mA
D (mm)
L (mm)
FIBERPOINT 250MDPart
Number: 1400000030Q / 1400000030E
D
L
Suitable ferrule 2.5 mm DIN, E2000, FC, SC, ST
- Adapters please see page 8/9 this brochureAccessories (not included):
- 4 - [email protected]
Made in GermanyFiber Optic Fault Locator
Notes: Do not use rechargeable batteries.Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)The above product specifications are subject to change without notice.
Applications: - The compact design of the visual fault locator is very suitable for daily usein all fiber optic applications e.g.inthe field,in industrial environment as well as in laboratory.
- To check singlemode/multimodeoptical fibers and
other fiber optic components on faults.- Patching of fibers.
- Private labelling is available- Minimum order quantity appliesFeature:
Patented universalport 2.5 mm
Order number: - 1400000030Q: Individually packed in Quadrosafe- 1400000030E: Individually packed in etui style plastic packaging
-
8/13/2019 IMM Katalog Fasergeraete
5/21
Parameter Min. Typ. Max.
Wavelength 532 nm
(Singlemode fiber 9/125 m) 500 W 700 W
(Multimode fiber 50/125 m) 500 W 800 W
Operation temperature 20 C 30 C
Storage temperature - 40 C 70 C
Battery type AAA
Optical output power 1 mW
Retention force for ferrule 1 - 2 N
Laser protection class 2M
Operation mode pulsed mode:frequency 2 - 3 Hz
Weight incl. batteries 60 g
Fiber coupled power
Operation current 300 mA
FIBERPOINT 250GPart
Number: 1401000026A
Applications:
Suitable ferrule 2.5 mm DIN, E2000, FC, SC, ST
- 5 - [email protected]
Made in GermanyFiber Optic Fault Locator
12
~180
D (mm)
L (mm)
D
L
1)Battery: VARTA Industrial Alkaline No. 4003;1.5 V; AAA; LR03 Micro; AM4; MN2400
Notes: Do not use rechargeable batteries.Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)The above product specifications are subject to change without notice.
- The compact design of the visual fault locator is very suitable for daily usein all fiber optic applications e.g.inthe field,in industrial environment as well as in laboratory.
- To check singlemode/multimodeoptical fibers and
other fiber optic components on faults.- Patching of fibers.
- Dust cap- One battery pack- Instruction manual- Quadrosafe economy plastic shipping box
Included in delivery:
Accessories (not included): - Adapters please see page 8/9 this brochure
- Private labelling is available
- Minimum order quantity applies
Feature:
Patented universalport 2.5 mm
-
8/13/2019 IMM Katalog Fasergeraete
6/21
12.1
156,5
Parameter Min. Typ. Max.
Wavelength 650 nm 655 nm 660 nm
(Singlemode fiber 9/125 m) 200 W 350 W
(Multimode fiber 50/125 m) 200 W 600 W
Operation temperature - 10 C 45 C
Storage temperature - 40 C 70 C
1Operation time - one battery pack (Pulsed mode) 40 hours
Battery type AAA
Optical output power 1 mW
Retention force for ferrule 1 - 2 N
Laser protection class 2
Operation mode continuous wave; pulsed mode: frequency: 2 - 3 Hz
Weight incl. batteries 70 g
Fiber coupled power
Operation current 35 mA
D (mm)
L (mm)
FIBERPOINT ETPart
Number: 1400000094Q / 1400000094E
D
L
Suitable ferrule 2.5 mm DIN, E2000, FC, SC, ST
- 1400000094Q:- 1400000094E:
Order number: Individually packed in QuadrosafeIndividually packed in etui style plastic packaging
- Private labelling is available
- Minimum order quantity applies- For resellers only
Feature:
- 6 - [email protected]
Made in GermanyFiber Optic Fault Locator
1)Battery: VARTA Industrial Alkaline No. 4003;1.5 V; AAA; LR03 Micro; AM4; MN2400
Notes: Do not use rechargeable batteries.Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)The above product specifications are subject to change without notice.
Applications:
- Dust cap- One battery pack- Instruction manual
Included in delivery:
- Adapters please see page 8/9 this brochureAccessories (not included):
- The compact design of the visual fault locator is very suitable for daily usein all fiber optic applications e.g.inthe field,in industrial environment as well as in laboratory.
- To check singlemode/multimodeoptical fibers and
other fiber optic components on faults.- Patching of fibers.
Patented universalport 2.5 mm
-
8/13/2019 IMM Katalog Fasergeraete
7/21
18
171
Parameter @ Tc = 25C Min. Typ. Max.
Wavelength 630 nm 638 nm 642 nm
(Singlemode fiber 9/125 m) 1400 W 1700 W
(Multimode fiber 50/125 m) 1400 W 2000 W
Operation temperature - 10 C 45 C
Storage temperature - 40 C 70 C
Battery type AAA
Optical output power 5 mW
Retention force for ferrule 1 - 2 N
Laser protection class 3R
Operation mode pulsed mode:frequency 2 - 3 Hz (250HP), cw (250HPD)
Weight incl. batteries 100 g
Fiber coupled power
Operation current 40 mA
D (mm)
L (mm)
L
Suitable ferrule 2.5 mm DIN, E2000, FC, SC, ST
D
L
FIBERPOINT 250HP / HPDPart
Number: 1401000007 / 1401000012
Made in GermanyFiber Optic Fault Locator
1)Battery: VARTA Industrial Alkaline No. 4003;1.5 V; AAA; LR03 Micro; AM4; MN2400
Notes: Do not use rechargeable batteries.Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)The above product specifications are subject to change without notice.
Applications:
- Dust cap- One battery pack- Instruction manual- Quadrosafe economy plastic shipping box
Included in delivery:
Accessories (not included):
- The compact design of the visual fault locator is very suitable for daily usein all fiber optic applications e.g.inthe field,in industrial environment as well as in laboratory.
- To check singlemode/multimodeoptical fibers and
other fiber optic components on faults.- Patching of fibers.
- Adapters please see page 8/9 this brochure
- Private labelling is available instead of stamping FIBERPOINT 250
- One-time charge applies- Minimum order quantity applies
Feature:
- 7 -
Patented universalport 2.5 mm
-
8/13/2019 IMM Katalog Fasergeraete
8/21
8.5
26
Parameter Specification
Side of the fiber 1.25 mm connection for LC, MU, F3000 etc.
Side of the FIBERPOINT 2.50 mm SM-ferrule
- Dust cap on both sides- Plastic foil bag packaging
Included in delivery:
D (mm)
L (mm)
Adapter 2.50 mm to 1.25 mmPart
Number: 1400000070
Applications:
- Adapts patented 2.50 mmFIBERPOINT connectionto a 1.25 mmconnection.Consequentlyyou can check most of thepopular fiber connector types with just onefiber optic fault locator.
1.25 mm side
D
L
Attenuation < 1.0 dB
Weight 10 g
FIBERPOINT 250with Adapter
FIBERPOINT 250MDwith Adapter
- 8 - [email protected]
Accessoirs
Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)Note: The above product specifications are subject to change without notice.
-
8/13/2019 IMM Katalog Fasergeraete
9/21
Adapter for POF (polymer optical fiber)Part
Number: 1400000078
Applications:
- Adapts the patented 2.50 mmFIBERPOINT connectionto a 1.5 and 2.2 mm outer diameter polymer optical fiberconnection. Consequentlyyou can check both popular fiberdiameters with one fiber optic fault locator.
Accessoirs
Parameter Specification
Side of the fiber 1.5 and 2.2 mm
Side of the FIBERPOINT 2.50 mm SM-ferrule
Attenuation typ .< 1.0 dB
Weight 8.5 g
Adapter for SMAPart
Number: 1400000088
Applications: - Adapts patented 2.50 mmFIBERPOINT connectionto SMA 905connection. Consequentlyyou can checkboth popular fiber connector types with just one fiber
optic fault locator.
Parameter Specification
Side of the fiber SMA 905 connector
Side of the FIBERPOINT 2.50 mm SM-ferrule
Attenuation typ. < 1.0 dB
Weight 3.5 g
- 9 - [email protected]
Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)Note: The above product specifications are subject to change without notice.
- Dust cap on both sides- Plastic foil packaging
Included in delivery:
- Dust cap on both sides- Plastic foil bag packaging
Included in delivery:
-
8/13/2019 IMM Katalog Fasergeraete
10/21
-
8/13/2019 IMM Katalog Fasergeraete
11/21- 11 - [email protected]
Equipment
Power MeterNumber: 7430000068
VC6-OPM / VC6-OPM-HPart
Features: - Dynamic range -60 dBm to 10 dBm- Resolution 0.01 dB- Wavelengths 850 nm,1300 nm,1310 nm,1490 nm, 1550 nm,1625 nm- Store data and download later via USB port
- Shows readings on large ViewConn display screen
- Powered by ViewConn batteries or AC adapter
Features
Display type mW, dBm, dB(REF)
Tone detection
270 Hz, 1000 Hz, 2000 Hz(for 850 nm, power within-25 dBm ~ 10 dBm, for allother wavelength, power
within -35 dBm ~ 10 dBm)
Data storage 999 items
Data interface USB 2.0
Software support included
Optical
Uncertainty 5 %
Wavelengths 800 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm
Resolution0.01 dB
(0.1 dB when < -55 dBm)
Dynamic range -40 dBm to 25 dBm
Interchangeable type FC/SC/ST/LC/E2K or universal type
Mechanical & Environmental
Operating temperature -10 C to 50 C
Dimensions 125 mm x 37 mm x 30 mm
Storage temperature -20 C to 70 C
Humidity (none condensing) 0 % to 95 %
Weight 100 g
VC6-OPM VC6-OPM-H
270 Hz, 1000 Hz, 2000 Hz(for 850 nm, power within-15 dbm ~ 25 dBm, for allother wavelength, power
within -20 dbm ~ 25 dBm)
0.01 dB(0.1 dB when < -35 dBm)
Distributed by IMM Photonics
Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)Note: The above product specifications are subject to change without notice.For USA based customers please contact Lightel directly.
-
8/13/2019 IMM Katalog Fasergeraete
12/21
- USB 2.0 adapter uses CI-1100 probe to view, capture and
store images on a Windows PC (7430000084)- ConnectorView Plus software for pass/fail analytical and
reporting software for a Windows PC (7430000088)- Hot fiber filter to inspect live fiber connectors. Useable toat least 20 dBm. Higher power would not damage the unit,but may not provide useful images
- Tip adapter to use any older CI-1000 tip with CI-1100 (7430000106)
Accessories:
Connector Inspector CI-1100Number: 7430000100Part
Applications: - Portable video microscope for fiber optic connectorend face inspection of male and female connectors
- Handheld probe design to enable inspection of bothpatchcords and difficult to reach in adaptor connectors
Features: - Eye-safe video viewing; Ergonomic design- Fast and easy focus; One hand operation- Large 3.5 LCD display- Operation by rechargeable battery pack- Inspect jumper cables and in bulkheads- Change inspection tips in seconds
- PC and APC tips for single fiber and ribbon connectors
- Probe CI-1100; LCD Monitor- Rechargeable battery pack (inside LCD monitor)- AC power adapter / battery charger- Universal 2.5 mm tip for PC type male connectors
- Universal 1.25 mm tip for PC type male connectors- Tip for SC and FC PC type female connectors- Tip for LC PC type female connectors- Tip box; Carrying case
- 12 - [email protected]
Equipment Distributed by IMM Photonics
Parameter Specification Probe
Optical resolution 0.5 m detectable
Field of view 0.425 mm x 0.320 mm~
Focus Manual adjustment, 2 mm travel
Light source Blue LED
D (mm) 35, L (mm) 175 (without cap)
Weight 200g
Parameter Specification Monitor
Weight
Power supply
Battery life
Dimensions W (mm) 105, H (mm) 90, D (mm) 45 (folded)
Display 3,5 LCD-TFT, 960x240 pixels; adjustable brightness and contrast
255 g (without battery)
9.6V battery pack or AC power supply US, EU and UK version available
4 hours
CI-1100-A2 Package includesone each:
Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)Note: The above product specifications are subject to change without notice.For USA based customers please contact Lightel directly.
Dimensions
-
8/13/2019 IMM Katalog Fasergeraete
13/21
- ConnectorView Plus pass/fail software (page 11 this brochure)Accessories:
Digital Inspector DI-1000Number: 7430000102 / 7430000103Part
Applications: - Inspect jumper cables and in bulkheads
Features: - Eye-safe video viewing- Fast, easy focus- One hand operation- Direct USB connection to PC- Built-in capture button- Digital zoom
- Free image capture software
Parameter Specification
Optical resolution 0.5 m detectable
Field of view 0.40 mm x 0.30 mm~
Focus Manual adjustment; 2 mm max. travel
Light source Blue LED
DI-1000-B2 Package includes:(Part Number 7430000102)
- USB 2.0 digital inspection probe- Series 2 universal tip for 2.5 mm male PC type connectors- Series 2 universal tip for 1.25 mm male PC type connectors- Series 2 tip for SC and FC female PC type connector- Soft carrying case for DI-1000- ConnectorView (standard) software, CD and manual
- 13 - [email protected]
Equipment
Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)Note: The above product specifications are subject to change without notice.For USA based customers please contact Lightel directly.
Distributed by IMM Photonics
Dimensions Diameter (mm) 35; Length (mm) 175 (without tip)
Power supply USB port of PC
DI-1000-B2/APC Package includes:(Part Number 7430000103) - USB 2.0 digital inspection probe- Series 2 universal tip for 2.5 mm male APC type connectors- Series 2 tip for SC and FC female APC type connector- Soft carrying case for DI-1000- ConnectorView (standard) software, CD and manual
Accessories:
-
8/13/2019 IMM Katalog Fasergeraete
14/21
Equipment
- 14 - [email protected]
ConnectorView Plus SoftwarePart Number: 7430000088
Features: - Designed for users needing a portableautomated pass/fail software to checkfor connector instantaneous
- Easy to use- Self-calibrating- Virtually instantaneous- Capture and save the images- Summary report can also be automatically generated in Excel
System requirements: - Windows 2000, XP, Vista- 10 MB of space
Screenshot from ferrule without contamination Screenshot from ferrule with contamination
Distributed by IMM Photonics
Note: The above product specifications are subject to change without notice.For USA based customers please contact Lightel directly.
-
8/13/2019 IMM Katalog Fasergeraete
15/21- 15 - [email protected]
Equipment
TMIBC Brand Cleaner LC, SCPart
Number: 7430000062 7430000063
Applications: - Fiber network panels and assemblies
- Outdoor FTTX applications- Cable assembly production- Test laboratory- Servers, switches, routers and OADMS with SC, FC, STand LC interfaces
Features: - Easy pushing motion engages connector and initiates cleaning- Disposable with 525+ cleanings per unit
- Made from antistatic resins- Cleaning micro fibers are densely stranded and debris free- Cleaning system rotates 180 for a full sweep- Extendable (27 mm) tip reaches recessed connectors- Audible click when fully engaged- Proven effective at removing (Test reports available): - Arizona Road Dust - Dryer Lint - Graphite - Post Mate - Distilled H2O Residue - NaCl Residue - Skin Oil
- Graphite - Pre Mate - 70% IPA Residue - Hand Lotion - Vegetable Oil
Number 9392 9393
Part number 7430000063 7430000062
DesciptionIBC Brand Cleaner SC for 2,5 mm
connectors - SC, FC and ST for UPC andAPC polishes
TM IBC 1,25 mmconnectors - LC, LC secure key and MU
for UPC and APC polishes
TM Brand Cleaner LC for
Environmental propertiesCrush resistance up to 45 lbsImpact resistance up to 6 feet
Operating temperature range -10C to 60C
Distributed by IMM Photonics
Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)Note: The above product specifications are subject to change without notice.For USA based customers please contact USConec directly.
-
8/13/2019 IMM Katalog Fasergeraete
16/21- 16 - [email protected]
Equipment
TMIBC Brand Cleaner M20Part
Number: 7430000095
Applications: - For harsh environment 2.0 mm based connector systems mostly used in broadcast and movie sector- Cleans plug and socket TERMINI- Cleans fiber optic ferrules in SMTPE 304M- Cleans LEMO MH-series connectors
- Cleans MIL-28876 mostly used in NATO based navy shipboard communication systems
Features: - Easy pushing motion engages connector and initiates cleaning- Disposable with 525+ cleanings per unit- Made from antistatic resins- Cleaning micro fibers are densely stranded and debris free- Cleaning system rotates 180 for a full sweep- Extendable (27 mm) tip reaches recessed connectors- Audible click when fully engaged
Number 12926
Part number 7430000095
Environmental properties
Crush resistance up to 45 lbs
Impact resistance up to 6 feetOperating temperature range -10C to 60C
Distributed by IMM Photonics
Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)Note: The above product specifications are subject to change without notice.For USA based customers please contact USConec directly.
Number 12926
Description IBC Brand Cleaner for SMTPE 304M, 2.0 mm TERMINITM
-
8/13/2019 IMM Katalog Fasergeraete
17/21
-
8/13/2019 IMM Katalog Fasergeraete
18/21
-
8/13/2019 IMM Katalog Fasergeraete
19/21- 19 - [email protected]
Equipment
Applications:
- US Conec MTP Brand MPO style connectors- MPO style cassette modules and cable assemblies- Parallel optics transceivers- Outdoor hardend MT ferrule based connectors
TM- HBMT connectors
TM- Molex ARRAY connectors (6 & 8 port)
Features: - Cleans both male and female MT ferrule based connectors- 600+ cleanings per unit- Cleaning cloth made from high density woven micro fibers- Cleaning cloth is washed and debris free- Adapter tip is supplied with 7104 for cleaning unmated MPO style connectors
Cleaners
Number Part Number Description
7104 7430000065TM
IBC Brand Cleaner for MPO style connectors (Verizon PID #11039451)
8247 7430000081TM TM
IBC Brand Cleaner for OptiTip compatible connectors
8037 7430000082TM TM
IBC Brand Cleaner for HBMT , ARRAY & MPO style connectors
TMIBC Brand Cleaner MPO, etc.Part
Number: 7430000065 7430000081
7430000082
Distributed by IMM Photonics
Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)Note: The above product specifications are subject to change without notice.For USA based customers please contact USConec directly.
-
8/13/2019 IMM Katalog Fasergeraete
20/21- 20 - [email protected]
Equipment
Optipop - Reel Cleaner, Pipe Cleaner, Stick Cleaners
Applications: - FTTX work sites installing OptiTap drop cables- Data center installation and preventive maintenance- Central office and head end new equipment installationsand preventive maintenance
- Production facilities that terminate fiber optic cableassemblies
- Testing and measuring laboratory using optoelectronicequipment
- Any application that uses unmated fiber optic connectors
Features: - Eliminates electrostatic charge- The washed, ultra clean micro-fiber cloth captures debris and other contamination- The cloth is robust, it does not fray or leave any fibrous materials behind- The most cost effective high-end cleaning solution available- Recommended by the leading optical networking companies
Cassette Cleaners
Number Part Number Description (400+ Cleanings)
6227 7430000064 Reel Cleaner, suitable for all connector types except male MT connectors
6226 7430000071 Reel Cleaner, suitable for male MTs (with guide pins), such as male MPOs
8057 7430000073
Reel Cleaner, suitable for single fiber hardened connectors, such as OptiTap
6230 7430000066 2-slot Reel Cleaner, suitable for all connector types except male MT connectors
6228 7430000072 Reel Cleaner, suitable for male MT-RJ ferrules
6232 7430000067 Reel Cleaner, Refills (pack of six)
Stick & Pipe Cleaners
Number Part Number Description
7892 7430000078 1,25mm stick cleaner for bulkhead & transceiver apps; LC and MU connectors (Qty=250)
7893 7430000079 2,50mm stick cleaner for bulkhead & transceiver apps; SC, ST,FC(150mm long-Qty=250)
6363 7430000074 1,25mm pipe cleaners for cleaning outside of ferrule and inside connector (Qty=600)
6364 7430000075 2,50mm pipe cleaners for cleaning outside of ferrule and inside connector (Qty=200)
Card Cleaners
Number Part Number Description
6367 7430000076 Small form factor cleaner for field use (120 cleanings)
6368 7430000077 Refills for Part #6367 (10 sheets)
8752 7430000080 Single sheet, disposable card cleaner (12 cleanings)
Distributed by IMM Photonics
Compliant with RoHS-requirements (2002/95/EG vom 27.01.2003)Note: The above product specifications are subject to change without notice.For USA based customers please contact USConec directly.
-
8/13/2019 IMM Katalog Fasergeraete
21/21
Ohmstrae 4
85716 Unterschleiheim
Germany
Tel.:
Fax:
www.imm-photonics.de
Release: 02-2011
by IMM Photonics GmbH
IMM Photonics GmbH
+49 89 321412-0
+49 89 321412-11