ImageWorks Intraskan DC Switch Install quick guide
-
Upload
don-vibbert -
Category
Health & Medicine
-
view
181 -
download
3
Transcript of ImageWorks Intraskan DC Switch Install quick guide
Intraskan DCDoorbell or Remote Console Connection Quick
Guide
05/0
1/20
23
2ImageWorks Proprietary – Confidential Information
Connections
Remove small daughter board by detaching two hex screws*
Open timer face plate cover
05/0
1/20
23
3ImageWorks Proprietary – Confidential Information
ConnectionsDaughter board could be rotated 180 degrees, and this is ok.
However, for either scenario, connections on next slide need to be to correct terminals
Scenario 1 Scenario 2
05/0
1/20
23
4ImageWorks Proprietary – Confidential Information
Connection Diagram
Main Unit Console
Doorbell Switch*Main Unit Power Board
Remote Console**
* Doorbell switch does not have to be from ImageWorks** Remote console is optional
1 pair communication wire connected to 2 outer
terminals
05/0
1/20
23
5ImageWorks Proprietary – Confidential Information
These instructions serve as supplemental guidance. They are not meant to replace the manuals, but
rather serve to complement it.
If there are any questions, please do not hesitate to contact us
914-592-6100
Summary