Where customised hydraulicsolutions could make it:

In restricted installation spaces

For weight reduction

In case of deviating angular positions

In case of steps in nominal width

To eliminate screwed connections andlower the risk of leakage points

To reduce assembly expenditures

To streamline article management

Applications,e.g.:1SN/2SN/1SC/2SC/2SN-K /3SPC4SP4SHR13 /R15PTFE

Pressure fittings:soldered, welded,monobloc and ZAKO designs

More than 400 metricconnectors

International standards:SAE, JIC, BSP, NPT, ORFS, DIN

Quickly mountable adapters,O-ring designs

FerrulesHose clampsClamp mounting

Inserts at a glance:

Connection types:

Seals:

DKOLDKMSAE flangesDIN flangesAdjustable gear pump connectionswith hole circle (LK 35, 40, 55)

O-ring sealing variantsNew suction hose inserts for hightear prevention and seal integrity

Delivery programme (selection):Thin-walled pipesHigh pressure distributorsLine systems for differentpressure ranges

Low pressure distributorsReturn collecting tanksSuction distributors

Conventional pipe bending:

Pipe bends Ø from 4.6 mm to60 mm

Wall thickness from 1 mm to 10mm

Bending angle up to 180°Bending radii 1,5 x OD

CNC controlled bending machines:

Right and left bendingPipe diameter 6 mm to 70 mmWall thickness up to 6 mmBending angle up to 180°possible mean bending radii

1,5 x OD

Hose types:

SAE 100 R4Suction hose 17A

1SN, 1SC, 1SN-K, 2SN,2SC, 2SN-K, SPC3

4SP, 4SH, SAE 100 R15,SAE 100 R13

Abrasion-proof surface

Hose types:SAE 100 R4Suction hose 17A

1SN, 1SC, 1SN-K, 2SN, 2SC,2SN-K, SPC3

4SP, 4SH, SAE 100 R15,

SAE 100 R13

4SP 560bar DN19, DN256SP 525bar DN31

Impulse-tested assemblies