ilti luce catalogue.images.philips.com/is/content/PhilipsConsumer/PDF... · di un museo, il...
Transcript of ilti luce catalogue.images.philips.com/is/content/PhilipsConsumer/PDF... · di un museo, il...
expo Lsistema LED magnetico
LTLD 1010
HANDCRAFTEDIN ITALY
ilti luceledscatalogue.
iltiluce.com
Museo Egizio di Torino
credits
direction and coordination nicola polzella
data developmentmarta eliasara munulli
hanno collaboratocarlo albanoclaudio spaccasassisilvia canonicamaria mancinimartina krulišgian paolo rasettocaterina giordano creative direction white
identity & graphic design undesign
photographyenrico murarogerardo del preteaa vv
rendering fabio fornasapasquale di ciommotreed - michele martino, alberto scatà
printing alzani tipografia
ed. ottobre 2010
ilti luce
La storia di ILTI LUCE ha inizio oltre vent’anni fa quando, dalla lunga esperienza in campo illuminotecnico del suo fondatore Carlo Alba-no, nasce la necessità di realizzare qualcosa di importante, destinato a diventare il punto di riferimento per molti professionisti della pro-gettazione.ILTI LUCE si è presentata sul mercato come la prima azienda italiana a fornire un’illuminazio-ne in grado di preservare i reperti storici, evi-tandone l’esposizione a raggi UV ed IR. Si trat-tava di un sistema a fibre ottiche ed era il 1989.Da allora la ricerca di soluzioni illuminotecniche innovative è diventata uno dei punti di forza di ILTI LUCE, che vanta al suo interno un labo-ratorio tecnico in cui sviluppa, progetta, pro-totipa e testa i prodotti che vengono realizzati per soddisfare le richieste, talvolta specifiche, di architetti e progettisti.ILTI LUCE è un’azienda flessibile, in grado di fornire consulenza e supporto tecnico proprio perché al suo interno dispone di personale qualificato che ripone del concetto di qualità, il fondamento del proprio lavoro.La qualità di cui parla ILTI LUCE è una qualità italiana, tutti i prodotti vengono progettati e re-alizzati in Italia. Solo alcune lavorazioni vengo-no effettuate all’esterno dell’azienda, spesso nella città natale, Torino e talvolta nel territorio del Nord Italia.“Handcrafted in Italy” è il modo in cui ILTI LUCE si presenta al mercato internazionale, un mercato attento alla tecnologia, intesa in termi-ni di qualità, efficienza e design.ILTI LUCE è un’azienda attenta all’ambiente. La ricerca in campo illuminotecnico l’ha porta-ta a sviluppare negli anni una delle gamme più complete di prodotti che utilizzano la sorgente a LED.L’utilizzo di apparecchi a LED garantisce un risparmio energetico considerevole, una ge-stione economica ottimale del sistema di illu-minazione per la riduzione dei costi di manu-tenzione. L’azienda ha scelto di sostenere e fare propria questa filosofia, nella sua ristrutturazione avve-nuta due anni fa. Una nuova sede, più grande della precedente in cui pannelli solari installati sul tetto dell’edificio producono energia solare per produrre apparecchi energy saving.
ilti luce
The history of ILTI LUCE started twenty years ago from a long experience in the field of lighting of its founder Mr. Carlo Albano, his desire was to achieve something that would become a landmark from many designers. ILTI LUCE was the first company in Italy to provide a lighting system that can preserve historical artifacts, avoiding exposure to UV and IR. The introduction of our fiber optic system became a fact in 1989.Since then the research for innovate lighting solutions has become one of the strengths of ILTI LUCE. The in house al a technical laboratory develops, makes prototypes and tests the products in accordance to the latest industry standards in order to meet the specific demands architects and designers.ILTI LUCE is a company that offers advice and technical support and above all flexibility.The quality of ILTI LUCE is handcrafted Italian quality, all products are developed and manufactured in Turin. “Handcrafted in Italy” is the way we present ILTI LUCE to the international market, a market conscious of technology, in terms of quality, efficiency and design.ILTI LUCE is an eco-friendly company. Our manufacturing process does not consume more power then we generate with our solar installation. This truly green spirit which is embedded in our DNA can also be found in our LED products, products which are designed for energy efficient performance. The result of our research in LED lighting is one of the most complete LED product ranges available in the market today.The use of our LED luminaires offers energy saving, optimal lighting control and light quality under all circumstances. And not to forget the reduction in maintenance cost over the lifetime of our products.
ILTI LEDS
È la linea di prodotti nata per concretizzare la ricerca sui LED che l’azienda ha iniziato fin dal 1998, sperimentando le nuove tecnologie che si sono rese disponibili negli ultimi anni. I LED attuali sono in fase di forte sviluppo e rappre-senteranno sempre di più un diverso modo di fare luce, con una crescente gamma di prodotti che ne adottano l’uso. Essi infatti sono il frutto dell’evoluzione di quei diodi luminosi che fino a poco tempo fa eravamo abituati a vedere nelle spie dei nostri elettrodomestici o lampeggianti sui nostri telefoni cellulari.La ricerca, nata nel campo dell’elettronica e dei microchips, ha consentito di elevarne la lumino-sità a livelli fino a qualche anno fa impensabili, mantenendo in gran parte integre le loro carat-teristiche di lunga durata e di basso consumo.Le potenze sono in genere di pochi watt e per-mettono di creare soluzioni luminose nuove e particolari.ILTI LUCE ha fatto una scelta precisa nell’adot-tare questa nuova sorgente luminosa, ovvero, produrre apparecchi destinati ai progettisti che desiderano materiali moderni e rifiniti come l’al-luminio e l’acciaio inox, l’ottone cromato satina-to, l’Ertacetal® e il policarbonato che si illumina-no quando vengono accesi. Questo catalogo ci consente di proporre, come sempre, ancora un nuovo modo di vedere la luce.La linea ILTI LEDS è tra le più complete sul mer-cato e comprende, oltre ad una serie di appa-recchi da incasso con LED ad alta resa, anche una vastissima serie di soluzioni illuminotecni-che per le esigenze dei progettisti.I sistemi sono modulari e possono essere adat-tati a qualunque esigenza. È possibile ottenere luce calda, fredda, colorata o regolabile con una rapida consultazione delle informazioni reperibili su questo nuovo Catalogo Tecnico Generale.
I.R.L. (Ilti Research Lab)Per un’azienda che ha nell’innovazione tecnologica il proprio principio operativo, il laboratorio rappre-senta il punto di partenza di ogni nuova proposta e soluzione.Attrezzato per la realizzazione di prototipi, è coadiu-vato da partner di settore per poter rispondere alle richieste di chi desidera una soluzione studiata ad hoc per le proprie esigenze.Qui si realizzano gli studi di fattibilità e si sperimen-tano le ultime tecnologie in campo illuminotecnico. Il progettista riceve sia la risposta ai quesiti tecnici, sia il prototipo funzionante di quanto vorrebbe re-alizzare.
materiali e costruzioneIlti Luce utilizza solo materiali di qualità come il policarbonato, l’alluminio, l’acciaio inox, l’otto-ne cromato satinato e l’Ertacetal®. Tutti i corpi dei faretti sono ottenuti mediante una tornitura
dal pieno per garantire la massima solidità co-struttiva e la cura del particolare. Ogni faretto da incasso è dotato di un dissipatore termico in alluminio anch’esso ottenuto dal pieno per con-sentire la migliore operatività del LED. Le mol-le di fissaggio sono state progettate per poter fissare i faretti in ogni condizione, e sono tutte realizzate in acciaio taglio laser. A questo scopo tutti i faretti, anche quelli previsti con montaggio a terra tramite cassaforma, sono predisposti nel retro del dissipatore termico, per l’inserimento delle molle in caso di fissaggio ad incasso a soffitto. Le ottiche interne sviluppate nel labo-ratorio I.R.L. garantiscono la massima resa con o senza l’abbinamento di focali e lenti. Queste ultime rappresentano una gamma completa per qualunque esigenza del progettista.
riflettori ed otticheI riflettori non sono tutti uguali e nelle prove di laboratorio con lo stesso tipo di LED e lo stes-so tipo di lente, la resa luminosa cambia se il riflettore non è adeguato alla tipologia di LED impiegato. La sperimentazione ha dato come risultato una serie di riflettori con una resa su-periore che vengono abbinati a lenti con angoli di apertura diversa. Questa tipologia di ottiche è stata denominata I.R.L.
dissipazione termicaTutta la serie Lux è progettata con idonee su-perfici di dissipazione. In particolare la serie da incasso è dotata di uno speciale dissipatore termico in alluminio che consente al LED di sca-ricare calore, garantendo così una temperatura ottimale di esercizio. Questo particolare costrut-tivo è importantissimo perché senza un’adegua-ta dissipazione termica, le prerogative di lunga durata tipiche dei LED vengono compromesse.
LED e fibre otticheLa grandissima esperienza maturata in quasi vent’anni di lavoro con le fibre ottiche non pote-va essere abbandonata con l’avvento dei LED. Anche in questo caso Ilti Luce ha cercato di pro-porre qualcosa di nuovo abbinando le due tec-nologie. Sono quindi stati realizzati e brevettati una nuova serie di illuminatori per fibre ottiche dalle dimensioni ridottissime, che consento-no l’impiego di fibre ottiche anche con bundle di serie normalmente utilizzati sugli illuminatori tradizionali.
accessoriSono tutti i particolari utili al completamento del proprio progetto. Sagome decorative di finitu-ra, elementi di fissaggio, picchetti per il terreno, profili, snodi, tutto quanto possa servire per la migliore riuscita del Vostro impianto di illumina-zione con i prodotti della linea ILTI LEDS.
applicazioniAll’interno di questo catalogo troverete la solu-zione ideale per una vasta serie di applicazioni. Illuminare, segnalare, far risaltare un particolare o rendere suggestivo un ambiente, tutto questo è possibile con ILTI LEDS. Progettare la vetrina di un museo, il camminamento di una casa, la cabina armadio di un hotel o un creare effetto di luce nell’acqua. Far cambiare colore alla faccia-ta di un palazzo, creare l’atmosfera desiderata in un ristorante, dare l’accento ad una serie di statue in un sito archeologico e segnalare per la sicurezza.
ILTI LEDS
is a range of products resulting from the research that ILTI LUCE has started since 1998.LEDs are currently undergoing a significate development and represent another way of lighting, Providing the opportunity to ever increase our product portfolio. Hugh Brightness and Power LEDs are the result of the evolution of lighting diodes, which we have seen as indicators in domestic appliances or flashing lights in mobile phones.The research, initiated in the electronic and micro-chips industry, has allowed to improve the lighting level and the light quality, keeping unchanged it’s long lifespan and low power consumption.ILTI LUCE chose to adopt new light sources and to manufacture new luminaires for designers who want to use new material, such as aluminum, stainless steel, sanded chromed brass, Ertacetal® and polycarbonate. Furthermore the small size of the LED light source opened a new field of possibilities to take form factor and design to the next level.We want to introduce this new catalogue to you as a new visual way of light and lighting design.ILTI LEDS is one of the most complete ranges available in the market, which includes a wide choice of different technologies of illuminating and engineering solutions for designers.The systems are modular and can be made suitable for any requirements.We can supply a wide variety of LED colours ranging from warm to cool white, coloured or dimmable .You can find the information you may need in this new General Technical Catalogue.
I.R.L. (Ilti Research Lab)ILTI LUCE’s in house laboratory is equipped with a facility for the development, technical validation and production of prototypes for onsite tests. This enables use to validate if customers specifications and design requirements are met.
material and constructionILTI LUCE uses high quality materials such as polycarbonate, aluminum, stainless steel, sanded chromed brass and Ertacetal®.All spots are machined from a solid rod of aluminum, brass or stainless steel in order to assure the best mechanical performance and to ensure a very high level of detail. All recessed spots are equipped with an aluminum heat dissipator, to obtain best in class thermal performance resulting in an excellent light output.. The fixing brackets have been designed to fix the spot in any condition and manufactured out of laser cut steel. All recessed spots for mounting in the floor are equipped
with a thermal dissipator. The internal optics developed by I.R.L. assure the high emission with or without optional lenses. We offer a wide variety of different beam angles to support our customers in various lighting needs.
reflectors and opticsReflectors are not all the same. Testing the same LED and the same lens, the light efficiency changes if the reflector is not maximized in performance to the LED used.The result of our research is a wide range of reflectors with a high efficiency that can be used in combination with several lenses. This type of optic is called I.R.L.
thermal dissipationSeries Lux has been designed with adequate dissipation surfaces, particularly the recessed series is equipped with a optimized aluminum dissipater to ensure thermal performance within the physical limits of the LED resulting in a stable light output over time and maximizing life time.This building block is very important as without a suitable thermal dissipation, the life-time and colour stability of the LED can be reduced.
LED and fibre opticsThe knowledge acquired over the last twenty years with fibre optic technology cannot be left aside with the introduction of the LED. Ilti Luce has now combined the two technologies. We have realized and patented a new range of fibre optic light-boxes with extremely small dimensions that enable the use of fibre optics with standard fibre harnesses.
accessoriesAccessories are useful for the successful completion of a project. Decorative rims, fixing elements, pegs, profiles, joints are all elements that are necessary to complete the lighting system with ILTI LEDS.
applicationsTo light or to highlight details or to create a specific environment, all is possible with ILTI LEDS. To design a show-case in a museum, the walkway of a residence or a light effect in water. To change the colour of the facade of a building, to create the atmosphere in a restaurant, to underline the details of statues in an archaeological site, or for signalizing and safety, for any situation you will find the solution.
Tak RGB
alluminio/ aluminum 4x2W
Pix-Q
Pix-T
Pix-Q Dark Light
Pix-T Dark Light
Net-Q
alluminio/aluminum 6 LED
Lux 32
Lux 32 RGB
alluminio/aluminum 9 LED
S.M.A. incasso/ recessed
alluminio/ aluminum 18 LED
Lux 32R
Lux 32R RGB
S.M.A.R. incasso/ recessed
S.M.A.R. RGB incasso/ recessed
guida alla consultazione/ directory for consultation
legenda icone e simboli/ caption icons and symbols
faretti da incasso serie LUX/
recessed spot LUX series
policarbonato/ polycarbonate 1,2W
Lux 01
Lux 02
Lux 03_25°
Lux 03_10°
Lux 04
policarbonato/ polycarbonate 3x1,2W
Lux 17_25°
Lux 17_10°
Lux 17_25° RGB
Lux 17_10° RGB
alluminio/ aluminum 1,2W - 2,5W
Lux 05
Lux 06
Lux 07_110°
Lux 07_60°
Lux 07_25°
Lux 07_10°
Lux 08
Lux 15
Tik
alluminio/ aluminum 3x1,2W
Lux 18_25°
Lux 18_10°
Lux 18_25° RGB
Lux 18_10° RGB
Lux 23_25°
Lux 23_10°
Lux 23_25° RGB
Lux 23_10° RGB
Tak
8
indice dei prodotti
product index
8
14
16
20
22
23
24
25
26
28
29
30
32
34
35
36
37
38
39
40
41
42
44
45
46
48
50
51
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
tecnopolimero/ techno-polymer 3x1,2W
Lux 20_25° TF
Lux 20_10° TF
Lux 20_25° RGB TF
Lux 20_10° RGB TF
faretti con fissaggio esterno serie lux/
spots with external bracket lux series
alluminio/ aluminum 2,5W
Lux 14
Lux 21
Lux 16
Lux 30
alluminio/aluminum 3x1,2W
Lux 27_25°
Lux 27_10°
Lux 27_25° RGB
Lux 27_10° RGB
Lux 10R_25°
Lux 10R_10°
Lux 10R_25° RGB
Lux 10R_10° RGB
acciaio inox/ stainless steel 3x1,2W
Lux 29_25°
Lux 29_10°
Lux 29_25° RGB
Lux 29_10° RGB
tecnopolimero/ techno-polymer 1,2W
Lux 09_110° TF
Lux 09_60° TF
Lux 10 TF
Lux 11 TF
Lux 12 TF
Lux 12 TF pedonabile/ Lux 12 TF walk over
ottone cromato satinato/ sanded chromed brass 1,2W
Lux 09_110°
Lux 09_60°
Lux 10
Lux 11
Lux 12
Lux 12 pedonabile/ walk over
Lux 12 S
Lux 35
Lux 36
ottone cromato satinato/ chromed sanded brass 3x1,2W
Lux 20_25°
Lux 20_10°
Lux 20_25° RGB
Lux 20_10° RGB
Lux 20 Opale RGB/ Lux 20 Opal RGB
84
85
86
87
88
89
90
92
93
94
95
96
98
100
102
103
104
106
108
109
110
112
114
115
116
117
118
119
120
121
122
124
126
128
129
130
131
132
133
134
136
9
Stick L orizzontale/ horizontal with lens
Stick verticale/ vertical
Stick L verticale/ vertical with lens
Flexled
Flexled 3W
Clemente LED
Clemente Master LED
Exalight
Exalight Q
serie bookled
Bookled 01
Bookled 02
Bookled 03
Bookled 04
Bookled HP
serie miniflux
Miniflux
Lux 25_10° + base/ with base
ottone cromato satinato/ sanded chromed brass 4x2W
Lux 34
faretti da incasso serie skilled/
recessed spot skilled series
Mini Skilled 01
Mini Skilled 02
Mini Skilled 03
Mini Skilled 04
Skilled 04
Skilled 03
Skilled 03 RGB
Skilled 01 SUV
Skilled 02 SUV
Skilled 03 SUV
Skilled 03 SUV RGB
lampade ed apparecchi a LED/
LED lamps and fittings
Stick orizzontale/ horizontal
alluminio/ aluminum 6 LED
Lux 33
Lux 33 RGB
alluminio/ aluminum 9 LED
S.M.A. staffa/ bracket
alluminio/ aluminum 18 LED
Lux 33R
Lux 33R RGB
S.M.A.R. staffa/ bracket
S.M.A.R. staffa RGB/ RGB bracket
acciaio inox/ stainless steel 2,5W
Lux 13
ottone cromato satinato/ sanded chromed brass 3x1,2W
Lux 25_25°
Lux 25_10°
Lux 25_25° RGB
Lux 25_10° RGB
Lux 25_25° + base
138
140
142
144
146
148
150
152
154
155
156
158
160
161
162
164
166
167
168
169
170
171
172
174
175
176
178
180
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
198
indice dei prodotti
product index
10
Daf 04
Daf 05
serie kobi
Kobi
serie ololux
Ololux-Q
Ololux-T
sistemi lineari a LED, di segnalazione
e sicurezza/ linear LED systems
for signalizing and safety
Appendiabiti LED/ LED dresshanger
Walk System LED 01
Walk System LED 01 incasso/ recessed
Walk System LED 02
Walk System LED 02 incasso/ recessed
Walk System LED HP
Walk System LED HP incasso/ recessed
Walk System LED HP opal
Nickname
Kalibro M
Kalibro L
lampade e apparecchi
per illuminazione d’effetto/
effect lighting lamps and fittings
serie raylux
Raylux
Raylux RGB
serie giet
Giet 01 plus
Giet 01 plus RGB
Giet 02 plus
Giet 02 plus RGB
serie glad
Glad 01
Glad 02
serie daf
Daf 01
Daf 02
Daf 03
Miniflux RGB
Miniflux HP
Miniflux HP RGB
Miniflux TwinLED
Camaled System
serie flexus
Flexus LED
serie velis
Velis LED
Velis LED RGB
Velis LED RGB DMX
serie bled
Bled LED
Bled LED RGB
Bled LED RGB DMX
Shapeline
apparecchi professionali/ professional devices
Soul Light
230
231
232
234
236
238
239
240
242
244
245
246
247
248
200
202
204
206
208
210
212
214
216
218
220
222
224
00
228
249
250
252
254
255
256
258
260
262
264
266
268
270
272
274
11
Slave RGB
Kit vetrine ricaricabile/ rechargeable kit for showcases
accessori/accessories
Lisadisk
sagome/ decorative rims
cassafome/ boxes
Luxcassa 1
Luxcassa 3
Luxcassa 5
Luxcassa 6
Boxskill 1
Boxskill 2
accessori DAF/ DAF accessories
Cassaforma/ box DAF 01
Cassaforma/ box DAF 02
Cassaforma/ box DAF 03
Kit pittogrammi/ pictograms kit
Illuminatore LED 02 + base/ LED light-box 02 with base
Illuminatore Fibraled HP/ LED light-box Fibraled HP
Illuminatore LED 02 RGB/ LED light-box 02 RGB
Kit cieli stellati/ kit starry sky 01-02
Kit cieli stellati/ kit starry sky 03-04
Kit cieli stellati/ kit starry sky 05-06
track system
Track system
sistemi di controllo e accessori/
control systems and accesories
Centralina da muro/ wall pilote station for DMX system
Centralina da muro/
Wall pilote station COLOR DMX
Centralina da muro/
Wall pilote station COLOR TEMPERATURE DMX
Slave DMX
Telecomando/ remote control
Tappo terminale/ end-cap DMX
Amplificatore di segnale/ signal amplifier
Cavo segnale DMX/ DMX signal cable
Centralina master RGB/ RGB pilote station
Walk System LED 03 incasso/ recessed
Walk System LED 04
Walk System LED 04 incasso/ recessed
Walk Movie LED
elettroluminescenza/ electroluminescence
Walk Slim Elettroluminescenza/ Electroluminescence
Walk Slim Elettroluminescenza incasso /
Electroluminescence recessed
Walk Movie Slim Elettroluminescenza/
Electroluminescence
Walk Movie Run Elettroluminescenza/
Electroluminescence
sistemi modulari a LED/ modular LED systems
Mago
Expo Q
Expo L
Sistema Angelicus/ Angelicus system
illuminatori a LED per fibre ottiche/
LED light-boxes for fibre optics
Illuminatore LED 01/ LED light-box 01
Illuminatore LED 02/ LED light-box 02
275
276
277
278
280
281
282
284
286
288
292
294
296
302
304
305
306
308
310
312
313
314
316
318
322
324
325
326
327
328
328
329
329
330
330
331
332
332
333
333
333
333
333
333
334
334
334
334
indice dei prodotti
product index
12
fissaggio/ fixation
Picchetto/ peg
Attacco/ fastening
Snodo/ fixation joint
Staffa Bled/ bracket for Bled
Chiave Lux 32/ key for Lux 32
Pozzetto Flexus LED/ well for Flexus LED
testate Walk Movie LED/
Walk Movie LED end-caps
Testata chiusa/ standard end-cap
Testata sagomata/ shaped end-cap
accessori appendiabiti LED/
LED dresshanger accessories
Coppia di ghiere/ pair of end-caps
Sostegno centrale/ ring of support
accessori Walk System/
Walk System accessories
Profili vuoti + alimentazione/ profiles+feeding
staffa di fissaggio rapido/ fast-fixing bracket
Profili vuoti a incasso + giunti/ recessed profiles+joints
staffe Velis/ Velis brackets
staffa sospensione/ suspension bracket
Staffa plafone/ ceiling bracket
Staffa parete/ wall bracket
Staffa angolare/ angle bracket
staffe soul light/ soul light brackets
accessori per miniflux/ miniflux accessories
schemi di collegamento/ wiring diagram
valigetta dimostrativa/ demo Case
avvertenze/ cautions
335
335
335
335
335
335
336
336
336
336
337
337
338
338
338
338
338
339
340
358
359
13
apparecchi LED per applicazioni in esterni/
LED spots for outdoor applications
Gli apparecchi presenti in questo elenco possono essere
installati sia in ambienti esterni sia in ambienti interni/ The
spots in this list can be installed in interior and in outdoor.
faretti da incasso serie Lux/
recessed spot serie Lux
alluminio/ aluminum 6 LED
alluminio/ aluminum 18 LED
ottone cromato satinato/
chromed sanded brass 1,2W
ottone cromato satinato/
chromed sanded brass 3x1,2W
acciaio inox 3x1,2W/ stainless steel 3x1,2W
tecnopolimero/ techno-polymer 1,2W
tecnopolimero/ techno-polymer 3x1,2W
faretti con fissaggio esterno serie Lux/
spots with external bracket serie Lux
alluminio/Aluminum 6 LED
alluminio/Aluminum 18 LED
acciaio inox/Stainless steel 2,5W
ottone cromato satinato/
chromed sanded brass 3x1,2W
ottone cromato/Chromed brass 4x2,5W
faretti da incasso serie SKILLED/
recessed spot serie SKILLED
lampade ed apparecchi a LED/
LED lamps and fittings
bookled 03 / Bookled 04 / Bookled HP
serie Miniflux/ Serie Miniflux
serie Flexus/ Serie Flexus
serie Velis/ Serie Velis
serie Bled/ Serie Bled
lampade e apparecchi per illuminazione d’effetto/
effect lighting lamps and fittings
serie Giet
serie Daf
sistemi lineari a LED e di segnalazione e sicurezza/
linear LED systems for signalizing and safety
nickname
walk System LED 04
illuminatori a LED per fibre ottiche/
LED light-boxes for fibre optics
illuminatori LED 01/ LED light box 01
illuminatori LED 02/ LED light box 02, 02 + base
apparecchi LED per applicazioni in interni/
LED spots for interior applications
Gli apparecchi presenti in questo elenco possono
essere installati solo in ambienti interni; per usi in
esterno si veda la categoria “applicazioni in esterno”/
The spots in this list can be installed only in interior;
for outdoor use see the category “outdoor application”.
faretti da incasso serie Lux/
recessed spot serie Lux/
policarbonato/ polycarbonate 1,2W
policarbonato/ polycarbonate 3x1,2W
alluminio/ aluminum 1,2W
alluminio/ aluminum 2,5W
alluminio/ aluminum 3x1,2W
alluminio/ aluminum 4x2W
alluminio/ aluminum 9 LED
alluminio/ aluminum 18 LED
faretti con fissaggio esterno serie Lux/
spots with external bracket serie Lux
alluminio/ aluminum 2,5W
alluminio/ aluminum 3x1,2W
alluminio/ aluminum 9LED
alluminio/ aluminum 18LED
lampade ed apparecchi a LED/
LED lamps and fittings
apparecchi professionali/
professional spots
lampade e apparecchi per illuminazione d’effetto/
effect lighting lamps and fittings pag.
sistemi lineari a LED e di segnalazione e sicurezza/
linear LED systems for signalizing and safety
sistemi modulari a LED/
modular LED systems
illuminatori a LED per fibre ottiche/
LED light-boxes for fibre optics
fibraled HP
track system
indice dei prodottiper applicazioni
product index
apparecchi LED IP65/68 per applicazioni in acqua/
LED spots IP65/68 for water applications
Gli apparecchi presenti in questo elenco possono essere
installati in acqua. Il grado IP65 protegge il faretto dal-
la polvere e dagli spruzzi d’acqua da tutte le direzioni; il
grado IP68 protegge il faretto dalla polvere e dagli effetti
dell’immersione (profondità max 1 mt)/
The spots in this list can be installed in water. IP65 index
of protection against dust and sprinkling of water from
all direction; IP68 index of protection against dust and
dipping effects.
faretti da incasso serie Lux/
recessed spot serie Lux
alluminio/Aluminum 6 LED
ottone cromato satinato/
chromed sanded brass 1,2W
ottone cromato satinato/
chromed sanded brass 3x1,2W
tecnopolimero/ techno-polymer 1,2W
tecnopolimero/ techno-polymer 3x1,2W
faretti con fissaggio esterno serie Lux/
spots with external bracket serie Lux
alluminio/Aluminum 6 LED
acciaio inox/Stainless steel 2,5W
ottone cromato satinato/
chromed sanded brass 3x1,2W
22
28
34
41
44
60
74
80
128
132
142
148
182
228
234
258
288
308
318
70
76
84
94
108
114
120
138
144
152
154
162
166
194
198
210
212
218
238
246
274
276
304
305+306
70
84
94
114
120
138
152
154
interni/ interior esterni/ outdoor immersione/ underwater
14
illuminatori a LED per fibre ottiche/
LED light-boxes for fibre optics
illuminatore LED 02 RGB/LED light-box 02 RGB
kit cieli stellati/ starry sky kits
apparecchi LED per uso decorativo RGB/RGBW*/
LED spots for decorative use RGB/RGBW*
Gli apparecchi presenti in questo elenco possono creare
effetti di luce dinamica e colorata. Si vedano le categorie
“applicazioni in interno” ed “applicazioni in esterno” per
un uso corretto dell’apparecchio/
The spots in this list create coloured and dynamic ef-
fects of light. See the category “interior application” or
“outdoor application” for the correct use of the spots.
faretti da incasso serie Lux/
recessed spot serie Lux
policarbonato/Polycarbonate 3x1W
alluminio/Aluminum 3x1W
alluminio/Aluminum 6 LED
alluminio/Aluminum 18 LED
ottone cromato satinato/
chromed sanded brass 3x1W
acciaio inox 3x1,2W/Stainless steel 3x1W
tecnopolimero/ techno-polymer 3x1W
faretti con fissaggio esterno serie Lux/
spots with external bracket serie Lux
alluminio/Aluminum 3 LED
alluminio/Aluminum 6 LED
alluminio/Aluminum 18 LED
ottone cromato satinato/
chromed sanded brass 3x1W
faretti da incasso serie SKILLED/
recessed spot serie SKILLED
skilled 03 RGB
skilled 03 SUV RGB
lampade ed apparecchi a LED/
LED lamps and fittings
miniflux RGB
miniflux HP RGB
velis RGB
velis RGB DMX
bled RGB
bled RGB DMX
lampade e apparecchi per illuminazione d’effetto/
effect lighting lamps and fittings
raylux RGB
giet Plus 01 RGB
giet Plus 02 RGB
kobi
30
46-82
72
78-82
96-104
110
122
134
140
146-150
156
172
178
200
204
214
216
220
222
236
240
242
252
310
312
decorativo/ decorative
15
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX0201F300CS
BLUX0201F30WCS
BLUX0201F301CS
BLUX0201F302CS
BLUX0201F303CS
BLUX0201F304CS
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
fascio ottico/beam angle
10°*
10°*
10°*
10°*
10°*
10°*
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
68
68
68
68
68
68
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
14000
3500
1550
875
5
10
14
18
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p. 342/ Example of wiring diagram on p. 342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 10ottone cromato satinato
lux 10 sanded chromed brass
guida alla consultazione/ directory for consultation
Faretto LED da incasso stagno per esterni.Corpo in ottone cromato satinato. Dissipatore ter-mico ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di guarnizioni di tenuta per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, con lente da 10° con vetro di protezione e pressa-cavo stagno. Il fissaggio può essere fatto con cas-saforma in plastica (Luxcassa 1) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 10° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 1). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
4453
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
!
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m. /Outdoor signalization, light effects and showers.Uderwater application: maximal depth 1m.
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)/ A soffitto tramite kit molle (incluse)
Recessed box Luxcassa 1 (not included p.333)/ Ceiling recessing with spring kit (included)
Solo per uso molle
Only for spring fixation
Ø 35 mm44
36
62
16
outdoor / underwateresterni / immersione
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
descrizione prodotto/product description
fotografia del prodotto/picture of product
esempio di applicazione/application example
specifiche tecniche e certificazioni internazionali/technical specifications and international certifications
tabella di riepilogo prodotti/ product overview table
alimentatori/ LED drivers
nome prodotto navigazione/ consultation
*note/ notes
disegni tecnici/technical drawings
illuminamento/illumination
avvertenze/warnings
applicazioni/applications
accessori/accessories
product name
17
legenda icone e simboli
caption icons and symbols
Prodotto conforme alle norme CEI 34-21, EN 60598 e rispondente alle direttive B.T. 73/23/CEE e loro aggiornamenti. Product in conformity with the CEI 3421 norms, EN 60598 and corresponding to the directives B.T. 73/23/CEE and their updates.
Apparecchio che utilizza una tensione di rete di 230V.Fitting using tension of 230V.
Grado di protezione contro la polvere e contro le ondate.Index of protection against dust and heavy waves.
Grado di protezione contro la polvere e contro l’im-mersione temporanea.Index of protection against dust and temporary im-mersion.
Consumo totale apparecchio W.Total power consumption W.
Grado di protezione contro i corpi solidi di dimen-sioni superiori a Ø 12 mm.Index of protection against solid bodies with dimen-sions greater than Ø12 mm.
Grado di protezione contro i corpi solidi di dimen-sioni superiori a 1 mm.Index of protection against solid bodies with dimen-sions greater than 1 mm.
Grado di protezione contro i corpi solidi di dimen-sioni superiori a 1 mm e la caduta di gocce d’acqua a pioggia fino a 60° dalla verticale.Index of protection against solid bodies with dimen-sions greater than 1 mm and drop of raining water up to 60° from the vertical.
Grado di protezione contro la penetrazione di pol-vere a gocce d’acqua a pioggia fino a 60° dalla verticale.Index of protection against penetration of dust and drop of raining water up to 60° from the vertical.
Grado di protezione contro la polvere e gli spruzzi d’acqua da tutte le direzioni.Index of protection against dust and sprinkling of water from all directions.
Protezione Classe I. Componente dotato di isola-mento principale provvisto di un dispositivo per il collegamento delle masse ad un conduttore di protezione.Protection Class I. Component with insulation provided with a device for the connection of the mass to a protection conductor.
Protezione Classe II. Componente dotato di un doppio isolamento o di un isolamento rinforzato e non provvisto di alcun dispositivo per il collegamen-to ad un conduttore di protezione.Protection Class II. Component with double insulation or reinforced insulation, not provided with any device for the connection to a protection conductor.
Protezione Classe III. Componente ad isolamento ridotto perchè destinato ad essere esclusivamente alimentato da un sistema a bassissima tensione di sicurezza (SELV) e nel quale non si generano tensioni di valore superiore a quello di tale sistema.Protection Class III. Component with reduced insulation because destined to be fed from a low voltage system (SELV), where are not produced higher tensions than the system itself.
Apparecchio che opera a bassa tensione 12V.Fitting working at low tension 12V.
Apparecchio che opera a bassa tensione 24V.Fitting working at low tension 24V.
12V
24V
230V
Grado di protezione contro la polvere e contro gli effetti dell’immersione (profondità max 1 mt.)Index of protection against dust and against dip-ping effects. (underwater max 1 mt.).
Massima temperatura ambiente nominale.Rated maximum ambient temperature.
Minima temperatura ambiente nominale.Rated minimum ambient temperature.
Orientabile +/- 20° dall’asse centrale.Adjustable +/- 20° from central axis.
Orientabile +/- 15° dall’asse centrale.Adjustable +/- 15° from central axis.
Orientabile +/- 45° dall’asse centrale.Adjustable +/- 45° from central axis.
18
Ottica asimmetrica. Fascio ottico 135°.Asymmetrical optic. Optic beam 135°.
Pedonabile.Walk over.
Non pedonabile.Do not walk over.
Carrabile fino a 500 kg (certificato).Weight resistant 500 kg (certified).
Carrabile fino a 3000 kg (certificato).Weight resistant 3000 kg (certified).
Non carrabile.Do not drive-over.
Fissaggio a parete.Wall mounted.
Fissaggio a soffitto.Ceiling mounted.
Fissaggio a parete o a soffitto.Wall or ceiling mounted.
Orientabile.Adjustability.
Fissaggio a parete, a pavimento o a soffitto.Wall, floor or ceiling mounted.
Montaggio a pavimento.Floor mounted.
Regolabile in altezza.Height adjustable.
Fissaggio a parete o a pavimentoWall or floor mounted.
Apparecchio RGB.RGB Fitting.
Apparecchio con 18 LED.Fitting with 18 LED.
Apparecchio con 6 LED.Fitting with 6 LED.
Apparecchio RGBW.RGBW Fitting.
Montaggio in immersione: profondità max 1m.Underwater application: maximal depth 1m.
Apparecchio RGB compatibile DMX 512.DMX 512 compatible RGB fitting.
Compatibile con Track system.Track system compatible.
track system compatible
19
Apparecchio con 72 LED.Fitting with 72 LED.
accessori/accessoriesLISADISK / sagome (non incluse p.332)
LISADISK / decorative rims (not included p.332)
22
lux 01policarbonato
lux 01 polycarbonate
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX01010300PC
BLUX0101030WPC
BLUX01010301PC
BLUX01010302PC
BLUX01010303PC
BLUX01010304PC
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
fascio ottico/beam angle
110°
110°
110°
110°
110°
110°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
accessori/accessories
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
IP/IP
44
44
44
44
44
44
h (m) E (lx) D (cm)
disegni tecnici/technical drawings
illuminamento/illumination
0.25
0.50
0.75
1.00
432
108
48
27
65
131
196
261
22
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
Solo per uso molle
Only for spring fixation
Ø 35mm
Faretto LED da incasso per interni.Corpo in policarbonato satinato ottenuto dal pieno. Dissipatore termico in alluminio pieno ricavato da bil-letta per ottimizzare la dispersione del calore, com-pleto di molle sagomate in acciaio per il fissaggio.1 LED da 1,2W 350 mA ad alta resa, dotato di otti-ca I.R.L. da 110°, vetro di protezione e pressacavo in materiale sintetico. Il faretto è ispezionabile inter-namente. Piccole sagome in acciaio elettroeroso o dischi in LISA colorata possono essere aggiunti in fase di montaggio come accessori decorativi. Ec-cellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Frosted polycarbonate body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 1 LED 1,2W 350mA high emission, with 110° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected. Optional decorative rims in stainless steel or in various colours of LISA can be added during installation. Excellent Colour Rendering Index (warm white = CRI >90).
41 38
110°
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
bianco freddo/cool white
1,2WIP44 Ta max 35°C
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
accessori/accessoriesLISADISK / sagome (non incluse p.332)
LISADISK / decorative rims (not included p.332)
lux 02policarbonato
lux 02 polycarbonate
interiorinterni
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX01016300PC
BLUX0101630WPC
BLUX01016301PC
BLUX01016302PC
BLUX01016303PC
BLUX01016304PC
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
fascio ottico/beam angle
60°
60°
60°
60°
60°
60°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
accessori/accessories
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
IP/IP
44
44
44
44
44
44
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
877
219
97
55
32
64
96
128
23
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
Solo per uso molle
Only for spring fixation
Ø 35mm
Faretto LED da incasso per interni. Corpo in policarbonato satinato ottenuto dal pieno. Dissipatore termico in alluminio pieno ricavato da bil-letta, per ottimizzare la dispersione del calore, com-pleto di molle sagomate in acciaio per il fissaggio.1 LED da 1,2W 350 mA ad alta resa, dotato di ottica I.R.L. con lente da 60° e pressacavo in materiale sin-tetico. Il faretto è ispezionabile internamente. Piccole sagome in acciaio elettroeroso o dischi in LISA co-lorata possono essere aggiunti in fase di montaggio come accessori decorativi. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Frosted polycarbonate body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 1 LED 1,2W 350mA high emission, with 60° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected. Optional decorative rims in stainless steel or in various colours of LISA can be added during installation. Excellent Colour Rendering Index (warm white = CRI >90).
41 38
60°
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
bianco freddo/cool white
1,2WIP44
disegni tecnici/technical drawings
illuminamento/illumination
Ta max 35°C
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
24
lux 03_25°policarbonato
lux 03_25° polycarbonate
prodotto/product
tabella di riepilogo prodotti/ product overview tablecolore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
fascio ottico/beam angle
25°*
25°*
25°*
25°*
25°*
25°*
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
accessori/accessories
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
IP/IP
44
44
44
44
44
44
24
Faretto LED da incasso per interni.Corpo in policarbonato satinato ottenuto dal pie-no. Dissipatore termico in alluminio pieno ricavato da billetta per ottimizzare la dispersione del calo-re, completo di molle sagomate in acciaio per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, dotato di lente da 25°, vetro di protezione e pres-sacavo in materiale sintetico. Il faretto è ispezio-nabile internamente. Piccole sagome in acciaio elettroeroso o dischi in LISA colorata possono essere aggiunti in fase di montaggio come acces-sori decorativi. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Frosted polycarbonate body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 1 LED 1,2W 350mA high emission, with 25° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected. Optional decorative rims in stainless steel or in various colours of LISA can be added during installation. Excellent Colour Rendering Index (warm white = CRI >90).
50 38
25°
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
codice/code
BLUX01014300PC
BLUX0101430WPC
BLUX01014301PC
BLUX01014302PC
BLUX01014303PC
BLUX01014304PC
1,2WIP44
disegni tecnici/technical drawings
illuminamento/illumination
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
bianco freddo/cool white
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
6928
1732
770
433
15
20
28
35
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
accessori/accessoriesLISADISK / sagome (non incluse p.332)
LISADISK / decorative rims (not included p.332)
Ta max 35°C
Solo per uso molle
Only for spring fixation
Ø 35mm
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
lux 03_10°policarbonato
lux 03_10° polycarbonate
prodotto/product
tabella di riepilogo prodotti/ product overview tablecolore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
fascio ottico/beam angle
10°*
10°*
10°*
10°*
10°*
10°*
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
accessori/accessories
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
IP/IP
44
44
44
44
44
44
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
12832
3208
1426
802
5
10
14
18
25
Faretto LED da incasso per interniCorpo in policarbonato satinato ottenuto dal pie-no. Dissipatore termico in alluminio pieno ricavato da billetta per ottimizzare la dispersione del calore, completo di molle sagomate in acciaio per il fissag-gio. 1 LED da 1,2W 350 mA ad alta resa, dotato di lente da 10°, vetro di protezione e pressacavo in materiale sintetico. Il faretto è ispezionabile inter-namente. Piccole sagome in acciaio elettroeroso o dischi in LISA colorata possono essere aggiunti in fase di montaggio come accessori decorativi. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Frosted polycarbonate body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 1 LED 1,2W 350mA high emission, with 10° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected. Optional decorative rims in stainless steel or in various colours of LISA can be added during installation. Excellent Colour Rendering Index (warm white = CRI >90).
50 38
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
codice/code
BLUX0101F300PC
BLUX0101F30WPC
BLUX0101F301PC
BLUX0101F302PC
BLUX0101F303PC
BLUX0101F304PC
10°
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
accessori/accessoriesLISADISK / sagome (non incluse p.332)
LISADISK / decorative rims (not included p.332)
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
bianco freddo/cool white
1,2WIP44
disegni tecnici/technical drawings
illuminamento/illumination
Ta max 35°C
Solo per uso molle
Only for spring fixation
Ø 35mm
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
interiorinterni
montaggio/installationA soffitto tramite molla/ dado/ O-ring (inclusi)
Ceiling recessing with spring/ nut/ O-ring (included)
*Disponibile in versione neutral white su richiesta. / Neutral white LED on demand.26
lux 04policarbonato
lux 04 polycarbonate
prodotto/product
tabella di riepilogo prodotti/ product overview tablecolore/colour
cool white*
warm white*
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
fascio ottico/beam angle
60°
60°
60°
60°
60°
60°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
molla/ dado/ O-ring/ spring/ nut/ O-ring
molla/ dado/ O-ring/ spring/ nut/ O-ring
molla/ dado/ O-ring/ spring/ nut/ O-ring
molla/ dado/ O-ring/ spring/ nut/ O-ring
molla/ dado/ O-ring/ spring/ nut/ O-ring
molla/ dado/ O-ring/ spring/ nut/ O-ring
IP/IP
40
40
40
40
40
40
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
725
181
81
45
30
60
89
119
26
Micro faretto LED da incasso per interni.Corpo in policarbonato satinato ottenuto dal pieno. 1 LED da 1,2W 350 mA ad alta resa, dis-sipatore interno in alluminio, dotato di un fascio ottico da 60°. Può essere fissato tramite dado M15 su superfici ispezionabili, con due o-ring in gomma o con molla di fissaggio. Il faretto è dotato di bloccacavo in materiale sintetico.
Micro recessed LED spot for interior use.Frosted polycarbonate body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation. 1 LED 1,2W 350mA high emission, 60° beam angle. You can use a M15 nut, two rubber O-rings or a spring to fix the spot. The spot is supplied with a pull relief.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
codice/code
BLUX06016500PC
BLUX0601650WPC
BLUX06016501PC
BLUX06016502PC
BLUX06016503PC
BLUX06016504PC
24 19
60°
1,2WIP40
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
Per incasso
Recessing
Ø 16mm
Ta max 35°C
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
interiorinterni
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX01034300PC
BLUX0103430WPC
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
policarbonato/
polycarbonate
policarbonato/
polycarbonate
fascio ottico/beam angle
25°*
25°*
ottica/optic
fissa/
fixed
fissa/
fixed
fissaggio/fixing
kit molle/
spring kit
kit molle/
spring kit
IP/IP
44
44
lux 17_25°policarbonato
lux 17_25° polycarbonate
Faretto LED da incasso per interni.Corpo in policarbonato satinato ottenuto dal pie-no. Dissipatore termico in alluminio pieno ricavato da billetta per ottimizzare la dispersione del calo-re, completo di molle sagomate in acciaio per il fissaggio. 3 LED da 1,2W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 25°, vetro di protezione e pressacavo in materiale sintetico. Il faretto è ispezionabile internamente in quanto il dissipatore è svitabile facendo presa sulla zigrinatura esterna. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Frosted polycarbonate body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 3 LED 1,2W 350mA high emission, with 25° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected by unscrewing the dissipator. Excellent Colour Rendering Index (warm white = CRI >90).
50 57
25°
3X1,2WIP44
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
Solo per uso molle
Only for spring fixation
Ø 48mm
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
Ta max 35°C
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
28
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
12640
3160
1404
790
20
30
45
65
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
50 57
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0103F300PC
BLUX0103F30WPC
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni
interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
policarbonato/
polycarbonate
policarbonato/
polycarbonate
fascio ottico/beam angle
10°*
10°*
ottica/optic
fissa/
fixed
fissa/
fixed
fissaggio/fixing
kit molle/
spring kit
kit molle/
spring kit
IP/IP
44
44
lux 17_10°policarbonato
lux 17_10° polycarbonate
Faretto LED da incasso per interni.Corpo in policarbonato satinato ottenuto dal pie-no. Dissipatore termico in alluminio pieno ricavato da billetta per ottimizzare la dispersione del calo-re, completo di molle sagomate in acciaio per il fissaggio. 3 LED da 1,2W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 10°, vetro di protezione e pressacavo in materiale sintetico. Il faretto è ispezionabile internamente in quanto il dissipatore è svitabile facendo presa sulla zigrinatura esterna. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Frosted polycarbonate body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 3 LED 1,2W 350mA high emission, with 10° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected by unscrewing the dissipator.Excellent Colour Rendering Index (warm white = CRI >90).
10°
3X1,2WIP44
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
Solo per uso molle
Only for spring fixation
Ø 48mm
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
Ta max 35°C
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
29
interiorinterni
3030
disegni tecnici/technical drawings fascio ottico/beam angle
25°
lux 17_25° RGBpolicarbonato
lux 17_25° RGB polycarbonate
Faretto LED da incasso per interni. Corpo in policarbonato satinato ottenuto dal pieno. Dissipatore termico in alluminio pieno ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di molle sagomate in acciaio per il fissaggio. 3 LED RGB da 1W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 25°, vetro di protezione e pres-sacavo in materiale sintetico. Il faretto è ispe-zionabile internamente in quanto il dissipatore è svitabile facendo presa sulla zigrinatura esterna. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando ma-nuale agendo direttamente sul master o tramite telecomando.
Recessed LED spot for interior use.Frosted polycarbonate body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 3 LED RGB 1W 350mA high emission, with 25° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected by unscrewing the dissipator. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.
50 57
Ta max 35°C3x1W RGBIP44
Solo per uso molle
Only for spring fixation
Ø 48mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
prodotto/product
tabella di riepilogo prodotti/ product overview table
31
applicazioni/applicationsIlluminazione decorativa e di accento per scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
codice/code
BLUX01034306PC
colore/colour
RGB
tipo/type
interni/
interior
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
policarbonato/
polycarbonate
fascio ottico/beam angle
25°*
ottica/optic
fissa/
fixed
fissaggio/fixing
kit molle/
spring kit
accessori/accessories
telecomando/
remote control
IP/IP
44
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
interior / decorativeinterni / decorativo
3232
lux 17_10° RGBpolicarbonato
lux 17_10° RGB polycarbonate
Faretto LED da incasso per interni. Corpo in policarbonato satinato ottenuto dal pieno. Dissipatore termico in alluminio pieno ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di molle sagomate in acciaio per il fissaggio. 3 LED RGB da 1W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 10°, vetro di protezione e pres-sacavo in materiale sintetico. Il faretto è ispe-zionabile internamente in quanto il dissipatore è svitabile facendo presa sulla zigrinatura esterna. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando ma-nuale agendo direttamente sul master o tramite telecomando.
Recessed LED spot for interior use.Frosted polycarbonate body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 3 LED RGB 1W 350mA high emission, with 10° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected by unscrewing the dissipator. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.
disegni tecnici/technical drawings fascio ottico/beam angle
50 5710°
Ta max 35°C3x1W RGBIP44
Solo per uso molle
Only for spring fixation
Ø 48mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
prodotto/product
tabella di riepilogo prodotti/ product overview table
33
codice/code
BLUX0103F306PC
colore/colour
RGB
tipo/type
interni/
interior
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
policarbonato/
polycarbonate
fascio ottico/beam angle
10°*
ottica/optic
fissa/
fixed
fissaggio/fixing
kit molle/
spring kit
accessori/accessories
telecomando/
remote control
IP/IP
44
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
applicazioni/applicationsIlluminazione decorativa e di accento per scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
interior / decorativeinterni / decorativo
3434
lux 05alluminio anodizzato
lux 05 anodized aluminum
prodotto/product
tabella di riepilogo prodotti/ product overview tablecolore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
180°
180°
180°
180°
180°
180°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
accessori/accessories
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
IP/IP
40
40
40
40
40
40
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
565
141
63
35
/
/
/
/
applicazioni/applicationsIlluminazione d’effetto e di accento. Per un impiego decorativo/Decorative lighting and accent lighting. Especially for decorative applications.
Faretto LED da incasso per interni.Corpo in alluminio solido anodizzato. Dissipatore termico in alluminio pieno ricavato da billetta per ottimizzare la dispersione del calore, completo di molle sagomate in acciaio per il fissaggio. LED da 1,2W 350 mA ad alta resa, fascio ottico 180° grazie ad una semisfera in policarbonato trasparente che permette di ottenere un effetto luce diffondente. Il faretto è ispezionabile internamente in quanto il dis-sipatore è svitabile facendo presa sulla zigrinatura esterna. Piccole sagome in acciaio elettroeroso o dischi in LISA colorata possono essere aggiunti come accessori decorativi.
Recessed LED spot for interior use.Anodized aluminum body machined from a solid rod to optimize heat dissipation, with steel fixation spring. 1 LED 1,2W 350mA high emission, with 180° beam angle, diffused effect through a transparent polycarbonate semisphere. The inside of the spot can be easily inspected by unscrewing the dissipator. Optional decorative rims in stainless steel or in various colours of LISA can be added during installation.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
codice/code
BLUX07015300AA
BLUX0701530WAA
BLUX07015301AA
BLUX07015302AA
BLUX07015303AA
BLUX07015304AA
180°
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
accessori/accessoriesLISADISK / sagome (non incluse p.332)
LISADISK / decorative rims (not included p.332)
Solo per uso molle
Only for spring fixation
Ø 35mm
32,558,5 ø38
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
Ta max 35°C1,2WIP40
35
lux 06alluminio anodizzato
lux 06 anodized aluminum
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX06016500AA
BLUX0601650WAA
BLUX06016501AA
BLUX06016502AA
BLUX06016503AA
BLUX06016504AA
colore/colour
cool white*
warm white*
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
60°
60°
60°
60°
60°
60°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
molla / dado/ O-ring/ spring/ nut/ O-ring
molla / dado/ O-ring/ spring/ nut/ O-ring
molla / dado/ O-ring/ spring/ nut/ O-ring
molla / dado/ O-ring/ spring/ nut/ O-ring
molla / dado/ O-ring/ spring/ nut/ O-ring
molla / dado/ O-ring/ spring/ nut/ O-ring
IP/IP
40
40
40
40
40
40
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
725
181
81
45
30
60
89
119
Micro faretto LED da incasso per interni. Corpo in alluminio anodizzato ottenuto da billet-ta piena. 1 LED da 1,2 W 350 mA, dissipatore interno in alluminio, dotato di un fascio ottico da 60°. Può essere fissato tramite dado M15 su superfici ispezionabili, con due O-ring in gomma o con molla di fissaggio. Il faretto è dotato di bloccacavo in materiale sintetico.
Micro recessed LED spot for interior use.Anodized aluminum body machined from a so-lid rod to optimize heat dissipation. 1 LED 1,2W 350mA high emission, 60° beam angle. You can use a M15 nut, two rubber O-rings or a spring to fix the spot. The spot is supplied with a pull relief.
60°
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
24 19
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*Disponibile in versione neutral white su richiesta. / Neutral white LED on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
Ta max 35°C1,2WIP40
montaggio/installationA soffitto tramite molla/ dado/ O-ring (inclusi)
Ceiling recessing with spring/ nut/ O-ring (included)
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
Per incasso
Recessing
Ø 16mm
interiorinterni
3636
lux 07_110°alluminio anodizzato
lux 07_110° anodized aluminum
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX01010300AA
BLUX0101030WAA
BLUX01010301AA
BLUX01010302AA
BLUX01010303AA
BLUX01010304AA
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
110°
110°
110°
110°
110°
110°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
accessori/accessories
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
IP/IP
44
44
44
44
44
44
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
432
108
48
27
65
131
196
261
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
Faretto LED da incasso per interni.Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calo-re. Completo di molle sagomate in acciaio per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, dotato di ottica I.R.L. da 110°, vetro di protezio-ne e pressacavo in materiale sintetico. Il faretto è ispezionabile internamente. Piccole sagome in acciaio elettroeroso o dischi in LISA colorata possono essere aggiunti in fase di montaggio come accessori decorativi. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Anodized aluminum body machined from a solid rod to optimize heat dissipation, with steel fixation spring. 1 LED 1,2W 350mA high emission, with 110° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected. Optional decorative rims in stainless steel or in various colours of LISA can be added during installation. Excellent Colour Rendering Index (warm white = CRI >90).
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
41 38
110°
1,2WIP44
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
accessori/accessoriesLISADISK / sagome (non incluse p.332)
LISADISK / decorative rims (not included p.332)
Ta max 35°C
Solo per uso molle
Only for spring fixation
Ø 35mm
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
37
lux 07_60°alluminio anodizzato
lux 07_60° anodized aluminum
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX01016300AA
BLUX0101630WAA
BLUX01016301AA
BLUX01016302AA
BLUX01016303AA
BLUX01016304AA
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
60°
60°
60°
60°
60°
60°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
accessori/accessories
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
IP/IP
44
44
44
44
44
44
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
877
219
97
55
32
64
96
128
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
Faretto LED da incasso per interni.Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calo-re. Completo di molle sagomate in acciaio per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, dotato di ottica I.R.L. con lente da 60° e pres-sacavo in materiale sintetico. Il faretto è ispezio-nabile internamente. Piccole sagome in acciaio elettroeroso o dischi in LISA colorata, possono essere aggiunti in fase di montaggio come ac-cessori decorativi. Eccellente Indice di Resa Cro-matica (warm white = CRI >90).
Recessed LED spot for interior use.Anodized aluminum body machined from a solid rod to optimize heat dissipation, with steel fixation spring. 1 LED 1,2W 350mA high emission, with 60° beam angle and synthetic cable gland. The inside of the spot can be easily inspecte. Optional decorative rims in stainless steel or in various colours of LISA can be added during installation. Excellent Colour Rendering Index (warm white = CRI >90).
60°
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
41 38
1,2WIP44
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
accessori/accessoriesLISADISK / sagome (non incluse p.332)
LISADISK / decorative rims (not included p.332)
Ta max 35°C
Solo per uso molle
Only for spring fixation
Ø 35mm
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
interiorinterni
38
lux 07_25°alluminio anodizzato
lux 07_25° anodized aluminum
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX01014300AA
BLUX0101430WAA
BLUX01014301AA
BLUX01014302AA
BLUX01014303AA
BLUX01014304AA
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
25°*
25°*
25°*
25°*
25°*
25°*
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
accessori/accessories
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
IP/IP
44
44
44
44
44
44
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
6928
1732
770
433
15
20
28
35
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
Faretto LED da incasso per interni.Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calore. Completo di molle sagomate in acciaio per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, dotato di lente da 25°, vetro di protezione e pres-sacavo in materiale sintetico. Il faretto è ispezio-nabile internamente. Piccole sagome in acciaio elettroeroso o dischi in LISA colorata possono es-sere aggiunti in fase di montaggio come accesso-ri decorativi. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Anodized aluminum body machined from a solid rod to optimize heat dissipation, with steel fixation spring. 1 LED 1,2W 350mA high emission, with 25° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected the dissipator. Optional decorative rims in stainless steel or in various colours of LISA can be added during installation. Excellent Colour Rendering Index (warm white = CRI >90).
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
50 38
25°
1,2WIP44
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
accessori/accessoriesLISADISK / sagome (non incluse p.332)
LISADISK / decorative rims (not included p.332)
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
Ta max 35°C
Solo per uso molle
Only for spring fixation
Ø 35mm
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
39
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
lux 07_10°alluminio anodizzato
lux 07_10° anodized aluminum
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX0101F300AA
BLUX0101F30WAA
BLUX0101F301AA
BLUX0101F302AA
BLUX0101F303AA
BLUX0101F304AA
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°*
10°*
10°*
10°*
10°*
10°*
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
accessori/accessories
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
sagome/ LISADISK/decorative rims/ LISADISK
IP/IP
44
44
44
44
44
44
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
12832
3208
1426
802
5
10
14
18
Faretto LED da incasso per interni.Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calore. Completo di molle sagomate in acciaio per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, dotato di lente da 10°, vetro di protezione e pressacavo in materiale sintetico. Il faretto è ispezionabile internamente. Piccole sagome in acciaio elettroeroso o dischi in LISA colorata possono essere aggiunti in fase di montaggio come accessori decorativi. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Anodized aluminum body machined from a solid rod to optimize heat dissipation, with steel fixation spring. 1 LED 1,2W 350mA high emission, with 10° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected. Optional decorative rims in stainless steel or in various colours of LISA can be added during installation. Excellent Colour Rendering Index (warm white = CRI >90).
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
50 38
10°
1,2WIP44
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
Ta max 35°C
accessori/accessoriesLISADISK / sagome (non incluse p.332)
LISADISK / decorative rims (not included p.332)
Solo per uso molle
Only for spring fixation
Ø 35mm
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
interiorinterni
4040
lux 08alluminio anodizzato
lux 08 anodized aluminum
codice/code
BLUX08016500AA
BLUX0801650WAA
BLUX08016501AA
BLUX08016502AA
BLUX08016503AA
BLUX08016504AA
colore/colour
cool white*
warm white*
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
60°
60°
60°
60°
60°
60°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
kit molle/ spring kit
IP/IP
40
40
40
40
40
40
Faretto LED da incasso per interni.Corpo in alluminio anodizzato. 1 LED da 1,2W 350 mA ad alta resa, dotato di lente 60° inserito in una sfera che consente di essere orientata. Il fissaggio avviene tramite molle in acciaio.
Recessed LED spot for interior use.Anodized aluminum body. 1 LED 1,2W 350mA high emission, with 60° beam angle. The lens is mounted in an adjustable sphere. Fixation with steel spring.
prodotto/product
tabella di riepilogo prodotti/ product overview table
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
725
181
81
45
30
60
89
11960°
25 45
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
*Disponibile in versione neutral white su richiesta. / Neutral white LED on demand.
Ta max 35°C
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
IP40 1,2W15°+-
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
Solo per uso molle
Only for spring fixation
Ø 37mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
41
Ta max 35°C
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
1266
316
141
79
33
65
98
130
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX08010300AA
BLUX0801030WAA
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni
interior
LED/LED
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
60°
60°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
kit molle/
spring kit
kit molle/
spring kit
IP/IP
40
40
lux 15alluminio anodizzato
lux 15 anodized aluminum
Faretto LED da incasso per interni.Corpo esterno in alluminio anodizzato. 1 LED da 2,5W 700 mA ad altissima resa collocato all’interno di un corpo in alluminio pieno, con alettature poste-riori, ricavato da billetta per ottimizzare la dispersione del calore, con pressacavo in materiale sintetico. Ottica orientabile con riflettore I.R.L. e lente da 60° completa di ghiera di chiusura. Un piccolo cilindro zigrinato posizionato sulla ghiera permette di fissare l’ottica nella posizione di orientamento desiderata. Il fissaggio avviene tramite molle in acciaio. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior.Anodized aluminum body. 1 LED 2,5W 700mA high emission positioned in an aluminum body machined from a solid rod to optimize heat dissipation. Synthetic cable gland. Adjustable spot I.R.L. optic with glass lens 60° with steel spring. Optic can be fixed in the desired orientation by means of a small screw. Steel fixation springs. Excellent Colour Rendering Index (warm white = CRI >90).
45 50
60°
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
3-5
4-12
4-12
8
/
*Esempio schemi di collegamento a p.345/ Example of wiring diagram on p.345
alimentatori/LED drivers
WALIMLED 01700
WALIMLED 03700
WALIMLED 05700
WALIMLED 12700
WALIMLED 12700D
WALIM/DIMM/JOLLY
WBOKVAR
3W - 700mA - 32x50x18 (h)
10W - 700mA - 115x34x20 (h)
18W - 700mA - 160x45x32 (h)
36W - 700mA - 132x40x30 (h)
36W - 700mA - 132x40x30 (h) - dimm.
25W - 700mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
IP4015°+-
2,5W
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
Solo per uso molle
Only for spring fixation
Ø 44mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
interiorinterni
4242
tikalluminio anodizzato
tik anodized aluminum
Microfaretto LED da incasso per interni.Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calore. IP40. 1 LED 1,2W 350mA ad alta resa. Fascio ottico 45°. Ottica orientabile +/- 20°. Incasso in controsoffitti max 5mm. Fissaggio con contro-ghiera in materiale plastico. Il faretto è ispezio-nabile internamente. Disponibile nelle versioni cool white, warm white, neutral white o luce colorata.BREVETTATO.
Micro LED recessed spot for interior use.Anodized aluminum body machined from a solid rod to optimize heat dissipation. IP40. 1 LED 1,2W 350mA high emission. Beam angle 45°. Adjustable optic +/- 20°. For recessed mounting in false ceilings max. 5mm. Fixation with plastic nut. The inside of the spot can be easily inspected. Available in cool white, warm white, neutral white or coloured light.PATENTED.
5022,50
8,50
24
45
disegni tecnici/technical drawings
montaggio/installationA soffitto tramite controghiera (inclusa)
Ceiling recessing with plastic nut (included)
Solo per uso controghiera
Only using plastic nut
Ø 35 mm
illuminamento/illumination
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
1952
488
217
122
16
32
47
63 45°
bianco freddo/cool white
20°
1,2W Ta max 35°CIP40+-
43
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BTIK08013500AA
BTIK0801350WAA
BTIK0801350NAA
colore/colour
cool white*
warm white*
neutral white*
tipo/type
interni/
interior
interni
interior
interni
interior
LED/LED
01
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
45°
45°
45°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
con controghiera/
with plastic nut
con controghiera/
with plastic nut
con controghiera/
with plastic nut
IP/IP
40
40
40
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
interiorinterni
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX01034300AA
BLUX0103430WAA
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
25°*
25 °*
ottica/optic
fissa/
fixed
fissa/
fixed
fissaggio/fixing
kit molle/
spring kit
kit molle/
spring kit
IP/IP
44
44
lux 18_25°alluminio anodizzato
lux 18_25° anodized aluminum
Faretto LED da incasso per interni.Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calo-re, completo di molle sagomate in acciaio per il fissaggio. 3 LED da 1,2W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 25°, vetro di protezione e pressacavo in ma-teriale sintetico. Il faretto è ispezionabile inter-namente in quanto il dissipatore è svitabile fa-cendo presa sulla zigrinatura esterna. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Anodized aluminum body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 3 LED 1,2W 350mA high emission, with 25° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected by unscrewing the dissipator. Excellent Colour Rendering Index (warm white = CRI >90).
50 57
25°
3X1,2WIP44
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
Solo per uso molle
Only for spring fixation
Ø 48mm
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
Ta max 35°C
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
44
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
12640
3160
1404
790
20
30
45
65
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0103F300AA
BLUX0103F30WAA
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
10°*
10°*
ottica/optic
fissa/
fixed
fissa/
fixed
fissaggio/fixing
kit molle/
spring kit
kit molle/
spring kit
IP/IP
44
44
lux 18_10°alluminio anodizzato
lux 18_10° anodized aluminum
Faretto LED da incasso per interni.Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calo-re, completo di molle sagomate in acciaio per il fissaggio. 3 LED da 1,2W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 10°, vetro di protezione e pressacavo in ma-teriale sintetico. Il faretto è ispezionabile inter-namente in quanto il dissipatore è svitabile fa-cendo presa sulla zigrinatura esterna. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Anodized aluminum body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 3 LED 1,2W 350mA high emission, with 10° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected by unscrewing the dissipator. Excellent Colour Rendering Index (warm white = CRI >90).
50 57
10°
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
Solo per uso molle
Only for spring fixation
Ø 48mm
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
3X1,2WIP44 Ta max 35°C
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
45
interiorinterni
4646
disegni tecnici/technical drawings fascio ottico/beam angle
lux 18_25° RGBalluminio anodizzato
lux 18_25° RGB anodized aluminum
Faretto LED da incasso per interni.Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calore, completo di molle sagomate in acciaio per il fis-saggio. 3 LED RGB da 1W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 25°, vetro di protezione e pressacavo in mate-riale sintetico. Il faretto è ispezionabile interna-mente in quanto il dissipatore è svitabile facen-do presa sulla zigrinatura esterna. La sequenza dinamica del cambio colore può avvenire au-tomaticamente o a comando manuale agendo direttamente sul master o tramite telecomando.
Recessed LED spot for interior use.Anodized aluminum body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 3 LED RGB 1W 350mA high emission, with 25° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected by unscrewing the dissipator. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.
50 5725°
Ta max 35°C3x1W RGBIP44
Solo per uso molle
Only for spring fixation
Ø 48mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
prodotto/product
tabella di riepilogo prodotti/ product overview table
47
codice/code
BLUX01034306AA
colore/colour
RGB
tipo/type
interni/
interior
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
fascio ottico/beam angle
25°*
ottica/optic
fissa/
fixed
fissaggio/fixing
kit molle/
spring kit
accessori/accessories
telecomando/
remote control
IP/IP
44
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
applicazioni/applicationsIlluminazione decorativa e di accento per scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
interior / decorativeinterni / decorativo
4848
lux 18_10° RGBalluminio anodizzato
lux 18_10° RGB anodized aluminum
Faretto LED da incasso per interni.Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calore, completo di molle sagomate in acciaio per il fis-saggio. 3 LED RGB da 1W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 10°, vetro di protezione e pressacavo in mate-riale sintetico. Il faretto è ispezionabile interna-mente in quanto il dissipatore è svitabile facen-do presa sulla zigrinatura esterna. La sequenza dinamica del cambio colore può avvenire au-tomaticamente o a comando manuale agendo direttamente sul master o tramite telecomando.
Recessed LED spot for interior use.Anodized aluminum body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 3 LED RGB 1W 350mA high emission, with 10° beam angle, protection glass and synthetic cable gland. The inside of the spot can be easily inspected by unscrewing the dissipator. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.
10°
disegni tecnici/technical drawings fascio ottico/beam angle
50 57
Solo per uso molle
Only for spring fixation
Ø 48mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
Ta max 35°C3x1W RGBIP44
prodotto/product
tabella di riepilogo prodotti/ product overview table
49
codice/code
BLUX0103F306AA
colore/colour
RGB
tipo/type
interni/
interior
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
fascio ottico/beam angle
10°*
ottica/optic
fissa/
fixed
fissaggio/fixing
kit molle/
spring kit
accessori/accessories
telecomando/
remote control
IP/IP
44
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
applicazioni/applicationsIlluminazione decorativa e di accento per scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
interior / decorativeinterni / decorativo
5050
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
4080
1020
453
295
30
45
65
90
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX08034300AA
BLUX0803430WAA
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
25°*
25°*
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
kit molle/
spring kit
kit molle/
spring kit
IP/IP
44
44
lux 23_25°alluminio anodizzato
lux 23_25°anodized aluminum
Faretto LED da incasso per interni.Corpo esterno in alluminio anodizzato solido. 3 LED da 1,2W 350 mA ad alta resa collocati all’interno di un corpo in alluminio pieno, con alettature posteriori, ricavato da billetta per ottimizzare la dispersione del calore, con pressacavo in materiale sintetico. Ottica orientabile dotata di lente a tre comparti con fascio ottico da 25° con vetro di protezione, completa di ghiera di chiusura. Un piccolo cilindro zigrinato po-sizionato sulla ghiera permette di fissare l’ottica nella posizione di orientamento desiderata. Il fissaggio avviene tramite molle in acciaio. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Anodized aluminum body. Aluminum heat dissipator with steel fixation spring. 3 LED 1,2W 350mA high emission, with 25° beam angle, adjustable optic, protection glass and synthetic cable gland. Optic can be fixed in the desired orientation by means of a small screw. Excellent Colour Rendering Index (warm white = CRI >90).
25°66 69
59
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
Solo per uso molle
Only for spring fixation
Ø 60mm
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
3X1,2WIP4415°+-
Ta max 35°C
51
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
12640
3160
1404
790
20
30
45
65
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0803F300AA
BLUX0803F30WAA
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
10°*
10°*
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
kit molle/
spring kit
kit molle/
spring kit
IP/IP
44
44
lux 23_10°alluminio anodizzato
lux 23_10°anodized aluminum
Faretto LED da incasso per interni.Corpo esterno in alluminio anodizzato solido. 3 LED da 1,2W 350 mA ad alta resa collocati all’interno di un corpo in alluminio pieno, con alettature posteriori, ricavato da billetta per ottimizzare la dispersione del calore, con pressacavo in materiale sintetico. Ottica orientabile dotata di lente a tre comparti con fascio ottico da 10° con vetro di protezione, completa di ghiera di chiusura. Un piccolo cilindro zigrinato po-sizionato sulla ghiera permette di fissare l’ottica nella posizione di orientamento desiderata. Il fissaggio avviene tramite molle in acciaio. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED spot for interior use.Anodized aluminum body. Aluminum heat dissipator with steel fixation spring. 3 LED 1,2W 350mA high emission, with 10° beam angle, adjustable optic, protection glass and synthetic cable gland. Optic can be fixed in the desired orientation by means of a small screw. Excellent Colour Rendering Index (warm white = CRI >90).
66 69
59
10°
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
Solo per uso molle
Only for spring fixation
Ø 60mm
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
interiorinterni
3X1,2WIP4415°+-
Ta max 35°C
5252
disegni tecnici/technical drawings fascio ottico/beam angle
lux 23_25° RGBalluminio anodizzato
lux 23_25° RGB anodized aluminum
Faretto LED da incasso per interni.Corpo esterno in alluminio anodizzato solido.3 LED RGB da 1W 350 mA ad alta resa col-locati all’interno di un corpo in alluminio pieno, con alettature posteriori, ricavato da billetta per ottimizzare la dispersione del calore, con pres-sacavo in materiale sintetico. Ottica orientabile dotata di lente a tre comparti con fascio otti-co da 25° con vetro di protezione, completa di ghiera di chiusura. Un piccolo cilindro zigrinato posizionato sulla ghiera permette di fissare l’ot-tica nella posizione di orientamento desiderata. Il fissaggio avviene tramite molle in acciaio. La sequenza dinamica del cambio colore può av-venire automaticamente o a comando manuale agendo direttamente sul master o tramite tele-comando.
Recessed LED spot for interior use.Anodized aluminum body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 3 LED 1,2W 350mA high emission, with 25° beam angle, adjustable optic, protection glass and synthetic cable gland. Optic can be fixed in the desired orientation by means of a small screw. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.
25°66 69
59
Solo per uso molle
Only for spring fixation
Ø 60mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
3x1WIP4415°+-
RGB Ta max 35°C
prodotto/product
tabella di riepilogo prodotti/ product overview table
53
codice/code
BLUX08034306AA
colore/colour
RGB
tipo/type
interni/
interior
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
fascio ottico/beam angle
25°*
ottica/optic
orientabile/
adjustable
fissaggio/fixing
kit molle/
spring kit
accessori/accessories
telecomando/
remote control
IP/IP
44
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
applicazioni/applicationsIlluminazione decorativa e di accento per scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
interior / decorativeinterni / decorativo
5454
lux 23_10° RGBalluminio anodizzato
lux 23_10° RGB anodized aluminum
10°
disegni tecnici/technical drawings fascio ottico/beam angle
66 69
59
Faretto LED da incasso per interni.Corpo esterno in alluminio anodizzato solido.3 LED RGB da 1W 350 mA ad alta resa col-locati all’interno di un corpo in alluminio pieno, con alettature posteriori, ricavato da billetta per ottimizzare la dispersione del calore, con pres-sacavo in materiale sintetico. Ottica orientabile dotata di lente a tre comparti con fascio otti-co da 10° con vetro di protezione, completa di ghiera di chiusura. Un piccolo cilindro zigrinato posizionato sulla ghiera permette di fissare l’ot-tica nella posizione di orientamento desiderata. Il fissaggio avviene tramite molle in acciaio. La sequenza dinamica del cambio colore può av-venire automaticamente o a comando manuale agendo direttamente sul master o tramite tele-comando.
Recessed LED spot for interior use.Anodized aluminum body. Aluminum heat dissipator, machined from a solid rod to optimize heat dissipation, with steel fixation spring. 3 LED 1,2W 350mA high emission, with 10° beam angle, adjustable optic, protection glass and synthetic cable gland. Optic can be fixed in the desired orientation by means of a small screw. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.
Solo per uso molle
Only for spring fixation
Ø 60mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
3x1WIP4415°+-
RGB Ta max 35°C
prodotto/product
tabella di riepilogo prodotti/ product overview table
55
codice/code
BLUX0803F306AA
colore/colour
RGB
tipo/type
interni/
interior
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
fascio ottico/beam angle
10°*
ottica/optic
orientabile/
adjustable
fissaggio/fixing
kit molle/
spring kit
accessori/accessories
telecomando/
remote control
IP/IP
44
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
applicazioni/applicationsIlluminazione decorativa e di accento per scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
interior / decorativeinterni / decorativo
disegni tecnici/technical drawings
takalluminio anodizzato
tak anodized aluminum
Faretto LED da incasso per interni. Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calore. Molle sagomate in acciaio per fissaggio in dota-zione. IP40. 3 LED 1,2W 350mA ad alta resa. Fascio ottico 10°/25°/40°. Ottica orientabile +/- 45°. Il faretto è ispezionabile internamente. Di-sponibile nelle versioni cool white, neutral white, warm white e luce colorata.BREVETTATO.
LED semi-recessed spot for interior.Body in anodized aluminum machined from a solid rod to optimize heat dissipation. Shaped fixation spring. IP40. 3 LED 1,2W 350mA high emission. Beam angle 10°/25°/40°. Adjustable optic +/- 45°. Available in cool white, neutral white, warm white and coloured light.PATENTED.
39
ø5085
56
3X1,2WIP4045°
Ta max 35°C+-
Solo per uso molle
Only for spring fixation
Ø 35mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.25
0.50
0.75
1.00
6240
1560
690
390
/
/
/
/
0.25
0.50
0.75
1.00
25790
6445
2865
1612
/
/
/
/
0.25
0.50
0.75
1.00
13920
3480
1547
870
/
/
/
/10° 25° 40°
bianco freddo/cool white
applicazioni/applicationsIlluminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BTAK0103F500AA
BTAK0103F50WAA
BTAK0103F50NAA
BTAK01034500AA
BTAK0103450WAA
BTAK0103450NAA
BTAK01037500AA
BTAK0103750WAA
BTAK0103750NAA
colore/colour
cool white
warm white
neutral white
cool white
warm white
neutral white
cool white
warm white
neutral white
tipo/type
interni/
interior
interni/
interior
interni/
interior
interni/
interior
interni/
interior
interni/
interior
interni/
interior
interni/
interior
interni/
interior
LED/LED
03
03
03
03
03
03
03
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
fascio ottico/beam angle
10°
10°
10°
25°
25°
25°
40°
40°
40°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing con molle/
with spring
con molle/
with spring
con molle/
with spring
con molle/
with spring
con molle/
with spring
con molle/
with spring
con molle/
with spring
con molle/
with spring
con molle/
with spring
IP/IP
40
40
40
40
40
40
40
40
40
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
57
interiorinterni
disegni tecnici/technical drawings
tak RGBalluminio anodizzato
tak RGB anodized aluminum
Faretto LED da incasso per interni. Corpo in alluminio anodizzato pieno ricavato da billetta per ottimizzare la dispersione del calore. Molle sagomate in acciaio per fissaggio in do-tazione. IP40. 3 LED RGB 1W 350mA ad alta resa. Fascio ottico 10°/25°/40°. Ottica orien-tabile +/- 45°. Il faretto è ispezionabile interna-mente. La sequenza dinamica del cambio colo-re può avvenire automaticamente o a comando manuale agendo direttamente sul master o tra-mite telecomando.BREVETTATO.
LED semi-recessed spot for interior.Body in anodized aluminum machined from a solid rod to optimize heat dissipation. Shaped fixation spring. IP40. 3 LED RGB 1W 350mA high emission. Beam angle 10°/25°/40°. Adjustable optic +/- 45°. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.PATENTED.
39
ø5085
fascio ottico/beam angle
58
10° 25° 40°
45°
3x1W Ta max 35°CIP40+-
RGB
Solo per uso molle
Only for spring fixation
Ø 35mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BTAK0103F506AA
BTAK01034506AA
BTAK01037506AA
colore/colour
RGB
RGB
RGB
tipo/type
interni/
interior interni/
interior
interni/
interior
LED/LED
03
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
fascio ottico/beam angle
10°
25°
40°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing con molle/
with spring
con molle/
with spring
con molle/
with spring
IP/IP
40
40
40
59
applicazioni/applicationsIlluminazione decorativa e di accento per scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
accessori/accessories
telecomando/
remote control
telecomando/
remote control
telecomando/
remote control
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
interior / decorativeinterni / decorativo
6060
disegni tecnici/technical drawings
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
2920
730
324
180
30
45
60
85
0.50
1.00
1.50
2.00
15280
3820
1690
955
10
20
30
40
0.50
1.00
1.50
2.00
6320
1580
702
395
15
30
40
50
pix-Qalluminio
pix-Q aluminum
10° 25° 40°
Faretto quadrato a LED da incassoper interni.Corpo esterno in lamiera di acciaio. 4 LED 2W 500mA (8W tot.) ad alta resa collocati all’inter-no di un corpo in alluminio anodizzato pieno, con alettature posteriori, ricavato da billetta per ottimizzare la dispersione del calore, con pres-sacavo in materiale sintetico. Ottica orientabile dotata di lente a quattro comparti con fascio ot-tico da 10°/25°/40°. Il fissaggio avviene tramite molle in acciaio. IP40. Finitura bianco, nero o grigio. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED square spot forinterior use.Square decorative rim made out of steel. 4 LED 2W 500mA (8W tot.) high emission, installed in a solid anodized aluminum body, machined from a solid rod to optimize heat dissipation, and synthetic pull relief. Adjustable optic angle 10°/25°/40°. Equipped with steel fixation spring. IP40. Available in white, black or grey. Excellent Colour Rendering Index (warm white = CRI >90).
bianco freddo/cool white
finitura biancowhite finishing
finitura grigiogrey finishing
finitura neroblack finishing
6090
Solo per uso molle
Only for spring fixation
Ø 65 - 70 mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
61
applicazioni/applicationsIlluminazione di ambienti e di locali pubblici, superfici, vetrine, corridoi./Hospitality lighting, showcases and corridor.
prodotto/product
codice/code
MPIXQ104F300BO
MPIXQ104F30WBO
MPIXQ1044300BO
MPIXQ104430WBO
MPIXQ1047300BO
MPIXQ104730WBO
MPIXQ104F300NE
MPIXQ104F30WNE
MPIXQ1044300NE
MPIXQ104430WNE
MPIXQ1047300NE
MPIXQ104730WNE
MPIXQ104F300GM
MPIXQ104F30WGM
MPIXQ1044300GM
MPIXQ104430WGM
MPIXQ1047300GM
MPIXQ104730WGM
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
finitura/finishing
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
*Esempio schemi di collegamento a p.344/ Example of wiring diagram on p.344
tabella di riepilogo prodotti/ product overview table
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
3
2
/
alimentatori/LED drivers
WALIMLED 04500
WALIMLED 08500
WALIMLED 12500
WALIM/DIMM/JOLLY
WBOKVAR
10W - 500mA
20W - 500mA - 165x40x25 (h)
26W - 500mA - 260x56x33 (h)
22W - 500mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
*Altre finiture disponibili con quantitativi minimi. /Other colour finishing on demand with minimum quantity.
interiorinterni
6262
disegni tecnici/technical drawings
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
pix-Talluminio
pix-T aluminum
10° 25° 40°
illuminamento/illuminationbianco freddo/cool white
finitura biancowhite finishing
finitura neroblack finishing
finitura grigiogrey finishing
82 60
Faretto tondo a LED da incassoper interni.Corpo esterno in lamiera di acciaio. 4 LED 2W 500mA (8W tot.) ad alta resa collocati all’inter-no di un corpo in alluminio anodizzato pieno, con alettature posteriori, ricavato da billetta per ottimizzare la dispersione del calore, con pres-sacavo in materiale sintetico. Ottica orientabile dotata di lente a quattro comparti con fascio ot-tico da 10°/25°/40°. Il fissaggio avviene tramite molle in acciaio. IP40. Finitura bianco, nero o grigio. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED round spot forinterior use.Round decorative rim made out of steel. 4 LED 2W 500mA (8W tot.) high emission, installed in a solid anodized aluminum body, machined from a solid rod to optimize heat dissipation, and synthetic pull relief. Adjustable optic an-gle 10°/25°/40°. Equipped with steel fixation spring. IP40. Available in white, black or grey. Excellent Colour Rendering Index (warm white = CRI >90).
Solo per uso molle
Only for spring fixation
Ø 65 - 70 mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
0.50
1.00
1.50
2.00
2920
730
324
180
30
45
60
85
0.50
1.00
1.50
2.00
15280
3820
1690
955
10
20
30
40
0.50
1.00
1.50
2.00
6320
1580
702
395
15
30
40
50
63
prodotto/product
codice/code
MPIXT104F300BO
MPIXT104F30WBO
MPIXT1044300BO
MPIXT104430WBO
MPIXT1047300BO
MPIXT104730WBO
MPIXT104F300NE
MPIXT104F30WNE
MPIXT1044300NE
MPIXT104430WNE
MPIXT1047300NE
MPIXT104730WNE
MPIXT104F300GM
MPIXT104F30WGM
MPIXT1044300GM
MPIXT104430WGM
MPIXT1047300GM
MPIXT104730WGM
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
kit molle/spring kit
finitura/finishing
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
tabella di riepilogo prodotti/ product overview table
*Altre finiture disponibili con quantitativi minimi. /Other colour finishing on demand with minimum quantity.
applicazioni/applicationsIlluminazione di ambienti e di locali pubblici, superfici, vetrine, corridoi./Hospitality lighting, showcases and corridor.
*Esempio schemi di collegamento a p.344/ Example of wiring diagram on p.344
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
3
2
/
alimentatori/LED drivers
WALIMLED 04500
WALIMLED 08500
WALIMLED 12500
WALIM/DIMM/JOLLY
WBOKVAR
10W - 500mA
20W - 500mA - 165x40x25 (h)
26W - 500mA - 260x56x33 (h)
22W - 500mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
interiorinterni
6464
pix-Q DARK-LIGHTalluminio
pix-Q DARK-LIGHT aluminum
Faretto quadrato a LED da incassoper interni.Corpo esterno in lamiera di acciaio. 4 LED 2W 500mA (8W tot.) ad alta resa collocati all’inter-no di un corpo in alluminio anodizzato pieno, con alettature posteriori, ricavato da billetta per ottimizzare la dispersione del calore, con pres-sacavo in materiale sintetico. Ottica arretrata per evitare l’abbagliamento e orientabile dotata di lente a quattro comparti con fascio ottico da 10°/25°/40°. Il fissaggio avviene tramite molle in acciaio. IP40. Finitura bianco, nero o grigio. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED square spot forinterior use.Square decorative rim made out of steel. 4 LED 2W 500mA (8W tot.) high emission, installed in a solid anodized aluminum body, machined from a solid rod to optimize heat dissipation, and synthetic pull relief. Adjustable optic angle 10°/25°/40°. Recessed optic system reduces glare and enhances visual comfort. Equipped with steel fixation spring. IP40. Available in whi-te, black or grey. Excellent Colour Rendering Index (warm white = CRI >90).
90 78
4,50
finitura biancowhite finishing
finitura neroblack finishing
finitura grigiogrey finishing
disegni tecnici/technical drawings
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
2920
730
324
180
30
45
60
85
0.50
1.00
1.50
2.00
15280
3820
1690
955
10
20
30
40
0.50
1.00
1.50
2.00
6320
1580
702
395
15
30
40
5010° 25° 40°
bianco freddo/cool white
Solo per uso molle
Only for spring fixation
Ø 70 - 72 mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
65
prodotto/product
codice/code
MPIXQD04F300BO
MPIXQD04F30WBO
MPIXQD044300BO
MPIXQD04430WBO
MPIXQD047300BO
MPIXQD04730WBO
MPIXQD04F300NE
MPIXQD04F30WNE
MPIXQD044300NE
MPIXQD04430WNE
MPIXQD047300NE
MPIXQD04730WNE
MPIXQD04F300GM
MPIXQD04F30WGM
MPIXQD044300GM
MPIXQD04430WGM
MPIXQD047300GM
MPIXQD04730WGM
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
finiturafinishing
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
tabella di riepilogo prodotti/ product overview table
*Altre finiture disponibili con quantitativi minimi. /Other colour finishing on demand with minimum quantity.
applicazioni/applicationsIlluminazione di ambienti e di locali pubblici, superfici, vetrine, corridoi./Hospitality lighting, showcases and corridor.
*Esempio schemi di collegamento a p.344/ Example of wiring diagram on p.344
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
3
2
/
alimentatori/LED drivers
WALIMLED 04500
WALIMLED 08500
WALIMLED 12500
WALIM/DIMM/JOLLY
WBOKVAR
10W - 500mA
20W - 500mA - 165x40x25 (h)
26W - 500mA - 260x56x33 (h)
22W - 500mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
interiorinterni
6666
pix-T DARK-LIGHTalluminio
pix-T DARK-LIGHT aluminum
finitura biancowhite finishing
finitura neroblack finishing
finitura grigiogrey finishing
Faretto tondo a LED da incassoper interni.Corpo esterno in lamiera di acciaio. 4 LED 2W 500mA (8W tot.) ad alta resa collocati all’inter-no di un corpo in alluminio anodizzato pieno, con alettature posteriori, ricavato da billetta per ottimizzare la dispersione del calore, con pres-sacavo in materiale sintetico. Ottica arretrata per evitare l’abbagliamento e orientabile dotata di lente a quattro comparti con fascio ottico da 10°/25°/40°. Il fissaggio avviene tramite molle in acciaio. IP40. Finitura bianco, nero o grigio. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed LED round spot forinterior use.Round decorative rim made out of steel. 4 LED 2W 500mA (8W tot.) high emission, installed in a solid anodized aluminum body, machined from a solid rod to optimize heat dissipation, and synthetic pull relief. Adjustable optic angle 10°/25°/40°. Recessed optic system reduces glare and enhances visual comfort. Equipped with steel fixation spring. IP40. Available in white, black or grey. Excellent Colour Rendering Index (warm white = CRI >90).
IP40 4x2W15°+-
Ta max 35°C
disegni tecnici/technical drawings
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
2920
730
324
180
30
45
60
85
0.50
1.00
1.50
2.00
15280
3820
1690
955
10
20
30
40
0.50
1.00
1.50
2.00
6320
1580
702
395
15
30
40
5010° 25° 40°
bianco freddo/cool white
Solo per uso molle
Only for spring fixation
Ø 70 - 72 mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
ø82
78
67
prodotto/product
codice/code
MPIXTD04F300BO
MPIXTD04F30WBO
MPIXTD044300BO
MPIXTD04430WBO
MPIXTD047300BO
MPIXTD04730WBO
MPIXTD04F300NE
MPIXTD04F30WNE
MPIXTD044300NE
MPIXTD04430WNE
MPIXTD047300NE
MPIXTD04730WNE
MPIXTD04F300GM
MPIXTD04F30WGM
MPIXTD044300GM
MPIXTD04430WGM
MPIXTD047300GM
MPIXTD04730WGM
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
04
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
con molle/with spring
finiturafinishing
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
bianco*/white*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
nero*/black*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
grigio*/grey*
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
tabella di riepilogo prodotti/ product overview table
*Altre finiture disponibili con quantitativi minimi. /Other colour finishing on demand with minimum quantity.
applicazioni/applicationsIlluminazione di ambienti e di locali pubblici, superfici, vetrine, corridoi./Hospitality lighting, showcases and corridor.
*Esempio schemi di collegamento a p.344/ Example of wiring diagram on p.344
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
3
2
/
alimentatori/LED drivers
WALIMLED 04500
WALIMLED 08500
WALIMLED 12500
WALIM/DIMM/JOLLY
WBOKVAR
10W - 500mA
20W - 500mA - 165x40x25 (h)
26W - 500mA - 260x56x33 (h)
22W - 500mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
interiorinterni
net-Qalluminio
net-Q aluminum
Faretto quadrato a LED da incassoper interni.4 LED 2W 500mA (8W tot.) ad alta resa colloca-ti all’interno di un corpo in alluminio anodizzato pieno, con alettature posteriori, ricavato da billetta per ottimizzare la dispersione del calore, con pres-sacavo in materiale sintetico. Ottica arretrata per evitare l’abbagliamento e dotata di lente a quattro comparti con fascio ottico da 10°/25°/40°. Il fis-saggio a scomparsa con cassaforma in dotazio-ne. IP40. Finitura bianco. Eccellente Indice di Resa Cromatica (warm white = CRI >90).Per controsoffitti di spessore max. 15mm.
Recessed LED square spot forinterior use.Aluminum body with frame and casing flush mounting. 4 LED 2W 500mA (8W tot.) high emission, installed in a solid anodized aluminum body, machined from a solid rod to optimize heat dissipation, and synthetic pull relief. Optic angle 10°/25°/40°. Fixation with box. Recessed optic system reduces glare and enhances visual comfort. IP40. White superficial finishing. Excellent Colour Rendering Index (warm white = CRI >90).For false ceiling max. 15mm.
Per incasso
Recessing
70x70 mm
IP40 4x2W Ta max 35°C
70
123
70
76
disegni tecnici/technical drawings
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
2920
730
324
180
30
45
60
85
0.50
1.00
1.50
2.00
15280
3820
1690
955
10
20
30
40
0.50
1.00
1.50
2.00
6320
1580
702
395
15
30
40
5010° 25° 40°
bianco freddo/cool white
montaggio/installationFissaggio con cassaforma (inclusa)
Fixation with box (included)
68
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
MPIX2104F300BO
MPIX21044300BO
MPIX21047300BO
colore/colour
cool white*
cool white*
cool white*
tipo/type
interni/
interior
interni
interior
interni
interior
LED/LED
04
04
04
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
10°
25°
40°
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissaggio/fixing
con cassaforma/
with box
con cassaforma/
with box
con cassaforma/
with box
finiturafinishing
bianco/
white
bianco/
white
bianco/
white
IP/IP
40
40
40
*Disponibile con LED a luce calda su richiesta. / Warm white LED on demand.
applicazioni/applicationsIlluminazione di ambienti e di locali pubblici, superfici, vetrine, corridoi./Hospitality lighting, showcases and corridor.
*Esempio schemi di collegamento a p.344/ Example of wiring diagram on p.344
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
3
2
/
alimentatori/LED drivers
WALIMLED 04500
WALIMLED 08500
WALIMLED 12500
WALIM/DIMM/JOLLY
WBOKVAR
10W - 500mA
20W - 500mA - 165x40x25 (h)
26W - 500mA - 260x56x33 (h)
22W - 500mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
69
interiorinterni
7070
lux 32alluminio anodizzato
lux 32 anodized aluminum
Proiettore da incasso a LED per esterni.Corpo in alluminio anodizzato ricavato dal pieno per ottimizzare la dissipazione del calore, guar-nizioni di tenuta per la protezione contro infiltra-zioni di polvere e di acqua e pressacavo stagno in metallo. Proiettore equipaggiato con 6 LED 3W 700mA ad alta resa. Driver per stabilizza-re la caduta di tensione in caso di cavi lunghi applicando alimentazione a 24V DC. Ottica con 6 lenti con fascio ottico 10°/25°/40° fissate su circuito elettronico, vetro di protezione e ghiera di chiusura in alluminio. Fissaggio tramite cas-saforma in materiale sintetico da annegare nel cemento. IP68. Potenza assorbita: 22W.Utilizzare alimentazione 12V in immersione.Collegamento in parallelo.BREVETTATO.
Recessed LED projector for outdoor use.Body in anodized aluminum machined from a solid rod to optimize heat dissipation, gasket for protection against dust and water ingress, cable gland in metal. The projector is equipped with 6 LED 3W 700mA high emission, internal low voltage converter to constant current. The converter is able to compensate the loss in line voltage using 24V DC drivers. Optic with 6 lenses 10°/25°/40° beam fixed on electronic circuit, protective glass and threaded ring in aluminum. Recessed box in synthetic material to install the spot in concrete. IP68. Power consumption: 22W.To use 12V feeding for submerged applications. Parallel connection.PATENTED.
80
110
124
accessori/accessoriesCassaforma Luxcassa6 (non inclusa p.333) e chiave (non inclusa p335)
Recessed installation box Luxcassa6 (not included p.333) and key (not included p.335)
111
120
disegni tecnici/technical drawings
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
6600
1650
730
410
/
/
/
/
0.50
1.00
1.50
2.00
33200
8300
3680
270
/
/
/
/
0.50
1.00
1.50
2.00
13200
3300
1450
820
/
/
/
/10° 25° 40°
bianco freddo/cool white
Ta max 35°C Ta min -20°C1mmaxIP68 6LED 22W
71
applicazioni/applicationsIlluminazione di ambienti, locali pubblici, facciate, piscine, fontane.Profondità massima d’immersione 1m./Hospitality lighting, front lighting, swimming pool, fountains.Underwater application: maximal depth 1m.
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
*codice/codenon inclusi/not included
*codice/codenon inclusi/not included
n. faretti/n. spots
n. faretti/n. spots
caratteristiche/specifications
caratteristiche/specifications
1
2
4
10
1
2
4
10
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
Per utilizzo in immersione/ For water immersion
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0606F300AA
BLUX0606F30WAA
BLUX06064300AA
BLUX0606430WAA
BLUX06067300AA
BLUX0606730WAA
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
06
06
06
06
06
06
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissaggio/fixing cassaforma/
box
cassaforma/
box
cassaforma/
box
cassaforma/
box
cassaforma/
box
cassaforma/
box
accessori/accessories
chiave/ key
Luxcassa6
chiave/ key
Luxcassa6
chiave/ key
Luxcassa6
chiave/ key
Luxcassa6
chiave/ key
Luxcassa6
chiave/ key
Luxcassa6
IP/IP
68
68
68
68
68
68
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
outdoor / underwateresterni / immersione
7272
lux 32 RGBalluminio anodizzato
lux 32 RGB anodized aluminum
Proiettore da incasso a LED per esterni. Corpo in alluminio anodizzato ricavato dal pieno per ottimizzare la dissipazione del calore, guar-nizioni di tenuta per la protezione contro infiltra-zioni di polvere e di acqua, e pressacavo stagno in metallo. Il proiettore è equipaggiato con 6 LED RGB ad alta emissione. Ottica con 6 lenti con fascio ottico 10°/25°/40° fissate su circuito elettronico, vetro di protezione e ghiera di chiu-sura in alluminio. Fissaggio tramite cassaforma in materiale sintetico da annegare nel cemento. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando ma-nuale agendo direttamente sul master o tramite telecomando. IP68. Potenza assorbita: 18W circa.Utilizzare sistema DMX con alimentata-zione 12V in immersioneBREVETTATO.
Recessed LED projector for outdoor use. Body in anodized aluminum machined from a solid rod to optimize heat dissipation, gasket for protection against dust and water ingress, cable gland in metal. The projector is equipped with 6 LED RGB high emission. Optic with 6 lenses 10°/25°/40° beam fixed on electronic circuit, protective glass and threaded ring in aluminum. Recessed box in synthetic material to install the spot in concrete. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP68. Power consumption: approximately 18W.When used in submerged applications, use only a 12V DMX system.PATENTED.
disegni tecnici/technical drawings
80
110
124
RGBIP68 6LED
fascio ottico/beam angle
10° 25° 40°
111
120
Ta max 35°C Ta min -20°C1mmax
accessori/accessoriesCassaforma Luxcassa6 (non inclusa p.333) e chiave (non inclusa p335)
Recessed installation box Luxcassa6 (not included p.333) and key (not included p.335)
18W
tabella di riepilogo prodotti/ product overview table
73
prodotto/product
codice/code
BLUX0606F306AA
BLUX06064306AA
BLUX06067306AA
colore/colour
RGB
RGB
RGB
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
06
06
06
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
10°
25°
40°
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissaggio/fixing cassaforma/
box
cassaforma/
box
cassaforma/
box
accessori/accessories
telecomando/ chiave/
remote control/ key/
Luxcassa 6
telecomando/ chiave/
remote control/ key/
Luxcassa 6
telecomando/ chiave/
remote control/ key/
Luxcassa 6
IP/IP
68
68
68
*Esempio schemi di collegamento a p.356/ Example of wiring diagram on p.356
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
In immersione con sistema DMX/ Submerged applications with DMX system
codice/code non inclusi/not included
Slave DMX
Controller
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
caratteristiche/specifications
n. faretti/n. spots
WSLAVEDMX6X3R
WTELEC-RGB
Slave DMX (24V /12V)
Telecomando / Remote control
3 (24V) /1 (12V)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB-DMX/controller RGB-DMX
!
Master DMX
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
/
/
/
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
applicazioni/applicationsIlluminazione di ambienti, locali pubblici, facciate, piscine, fontane.Profondità massima d’immersione 1m./Hospitality lighting, front lighting, swimming pool, fountains.Underwater application: maximal depth 1m.
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Cavi/ Cables
QDMX512/CABLE-A
QDMX512/CABLE-B
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
outdoor / underwater / decorativeesterni / immersione / decorativo
S.M.A. incassoalluminio
S.M.A. recessed aluminum
Faretto da incasso a LED per interni.Corpo in alluminio verniciato ricavato da una fusione in gravità. Proiettore equipaggiato con 9 LED 3W 700mA (27W tot.) ad alta resa, dri-ver integrato. Driver per stabilizzare la caduta di tensione in caso di cavi lunghi applicando ali-mentazione a 24V DC. Ottica con 9 lenti con fascio ottico 10°/25°/40° fissate su circuito elettronico. Grazie alla struttura che sostiene il faretto, si ha una ampia gestione dell’orientabi-lità in tutti i sensi. Fissaggio tramite ghiera con molle. IP40. Verniciato in bianco, nero o grigio.Eccellente Indice di Resa Cromatica (warm white = CRI >90).Collegamento in parallelo.BREVETTATO.
Recessed LED spot for interior use.Varnished die-casted aluminum body. Projector with 9 LED 3W 700mA (tot. 27W) high emission, internal low voltage converter to constant current. The converter is able to compensate the loss in line voltage using 24V DC drivers. Optic with 9 lenses with 10°/25°/40° beam angle. Steel fixation spring. IP40. White, black or grey varnish. Excellent Colour Rendering Index (warm white = CRI >90).Parallel connection.PATENTED.
disegni tecnici/technical drawings
ø127 ø146
80
20°+-
IP40 9x3W Ta max 35°C
finitura grigiogrey finishing
finitura neroblack finishing
finitura biancowhite finishing
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
10400
2600
1150
650
/
/
/
/
0.50
1.00
1.50
2.00
37200
9300
4100
2300
/
/
/
/
0.50
1.00
1.50
2.00
14400
3600
1600
900
/
/
/
/10° 25° 40°
bianco freddo/cool white
Solo per uso molle
Only for spring fixation
Ø 130 mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
74
applicazioni/applicationsIlluminazione generale di ambienti, locali pubblici e supermercati./General lighting, accent lighting, decorative ligh-ting, public places or supermarket lighting.
interiorinterni
prodotto/product
codice/code
MSMA0109F300GM
MSMA0109F30WGM
MSMA01094300GM
MSMA0109430WGM
MSMA01097300GM
MSMA0109730WGM
MSMA0109F300NE
MSMA0109F30WNE
MSMA01094300NE
MSMA0109430WNE
MSMA01097300NE
MSMA0109730WNE
MSMA0109F300BO
MSMA0109F30WBO
MSMA01094300BO
MSMA0109430WBO
MSMA01097300BO
MSMA0109730WBO
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
finiturafinishing
grigio/grey
grigio/grey
grigio/grey
grigio/grey
grigio/grey
grigio/grey
nero/black
nero/black
nero/black
nero/black
nero/black
nero/black
bianco/white
bianco/white
bianco/white
bianco/white
bianco/white
bianco/white
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
tabella di riepilogo prodotti/ product overview table
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
3
8
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
75
7676
lux 32Ralluminio anodizzato
lux 32R anodized aluminum
Proiettore LED da incasso per esterni.Corpo in alluminio anodizzato ricavato dal pieno per ottimizzare la dissipazione del calore, guarnizioni di tenuta per la protezione contro infiltrazioni di polve-re e di acqua e pressacavo in metallo. Il proiettore è equipaggiato con 18 LED 420 mA ad alta resa con driver integrato. Ottica fissa con 6 lenti minitrittiche con fascio ottico 10°/25°/40° fissate su circuito elettronico, vetro di protezione e ghiera di chiusura in alluminio. Fissaggio tramite cassaforma in mate-riale sintetico da annegare nel cemento. IP65/67. Potenza assorbita: 30W circa.NON in immersione.Collegamento in parallelo.BREVETTATO.
Recessed LED spot for outdoor use.Body in anodized aluminum machined from a solid rod to optimize heat dissipation, gasket for protec-tion against dust and water ingress, cable gland in metal. The projector is equipped with 18 LED 420 mA high efficiency, internal low voltage converter to constant current. Fixed optic with 6 triple lenses. Beam angle 10°/25°/40°, protective glass and th-reated ring in aluminum. Recessed box in synthetic material to install the spot in concrete. IP65/67. Po-wer consumption: approximately 30W.Do not use for water immersion.Parallel connection.PATENTED.
Ta max 35°C30W18LED Ta min -20°C
80
110
124
accessori/accessoriesCassaforma Luxcassa6 (non inclusa p.333) e chiave (non inclusa p335)
Recessed installation box Luxcassa6 (not included p.333) and key (not included p.335)
111
120
disegni tecnici/technical drawings
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
13400
3350
1480
830
/
/
/
/
0.50
1.00
1.50
2.00
49400
12350
5450
3080
/
/
/
/
0.50
1.00
1.50
2.00
29600
7400
3250
1850
/
/
/
/10° 25° 40°
bianco freddo/cool white
IP65/67
77
applicazioni/applicationsIlluminazione di ambienti, facciate, locali pubblici, viali./ Environments, front lighting and hospitality lighting.
esterniesterni
*Esempio schemi di collegamento a p.346 / Example of wiring diagram on p.346
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
7
alimentatori/LED drivers
WALIM40W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0618F500AA
BLUX0618F50WAA
BLUX06184500AA
BLUX0618450WAA
BLUX06187500AA
BLUX0618750WAA
colore/colour
cool white*
warm white*
cool white*
warm white*
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
18
18
18
18
18
18
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissaggio/fixing
cassaforma/
box
cassaforma/
box
cassaforma/
box
cassaforma/
box
cassaforma/
box
cassaforma/
box
accessori/accessories
chiave/ key
Luxcassa6
chiave/ key
Luxcassa6
chiave/ key
Luxcassa6
chiave/ key
Luxcassa6
chiave/ key
Luxcassa6
chiave/ key
Luxcassa6
IP/IP
65/67
65/67
65/67
65/67
65/67
65/67
*Disponibile in versione neutral white o con LED a luce colorata su richiesta. /Neutral white or coloured LED on demand.
7878
disegni tecnici/technical drawings
lux 32R RGBalluminio anodizzato
lux 32R RGB anodized aluminum
ø80
110
ø124
Proiettore LED da incasso per esterni.Corpo in alluminio anodizzato ricavato dal pie-no per ottimizzare la dissipazione del calore, guarnizioni di tenuta per la protezione contro infiltrazioni di polvere e di acqua e pressacavo in metallo. Il proiettore è equipaggiato con 18 LED RGB ad alta resa senza driver (utilizzare SLAVE DMX). Ottica fissa con 6 lenti minitrittiche con fascio ottico 10°/25°/40° fissate su circuito elet-tronico, vetro di protezione e ghiera di chiusura in alluminio. Fissaggio tramite cassaforma in materiale sintetico da annegare nel cemento. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando ma-nuale agendo direttamente sul master o tramite telecomando. IP65/67. Potenza assorbita: 25W circa. NON in immersione.BREVETTATO.
Recessed LED spot for outdoor use.Body in anodized aluminum machined from a solid rod to optimize heat dissipation, gasket for protection against dust and water ingress, cable gland in metal. The projector is equipped with 18 LED RGB high efficiency, whitout driver (to use SLAVE DMX). Fixed optic with 6 triple lenses. Beam angle 10°/25°/40°, protective glass and threated ring in aluminum. Recessed box in synthetic material to install the spot in concrete. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP65/67. Power consumption: approximately 25W. Do not use for water immersion.PATENTED.
fascio ottico/beam angle
10° 25° 40°
accessori/accessoriesCassaforma Luxcassa6 (non inclusa p.333) e chiave (non inclusa p335)
Recessed installation box Luxcassa6 (not included p.333) and key (not included p.335)
111
120
IP65/67 Ta min -20°CTa max 35°C18LED RGB25W
79
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
9
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0618F506AA
BLUX06184506AA
BLUX06187506AA
colore/colour
RGB
RGB
RGB
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
18
18
18
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
fascio ottico/beam angle
10°
25°
40°
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissaggio/fixing cassaforma/
box
cassaforma/
box
cassaforma/
box
accessori/accessories
telecomando /chiave/
remote control /key
Luxcassa6
telecomando /chiave/
remote control /key
Luxcassa6
telecomando /chiave/
remote control /key
Luxcassa6
IP/IP
65/67
65/67
65/67
*Esempio schemi di collegamento a p.356 / Example of wiring diagram on p.356
codice/code non inclusi/not included
Slave DMX
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
caratteristiche/specifications
n. faretti/n. spots
WSLAVEDMX6X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
Slave DMX
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
1
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB-DMX/controller RGB-DMX
!
Master DMX
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
/
/
/
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
applicazioni/applicationsIlluminazione di ambienti, facciate, locali pubblici, viali./ Environments, front lighting and hospitality lighting.
outdoor / decorativeesterni / decorativo
S.M.A.R incassoalluminio
S.M.A.R recessed aluminum
Faretto da incasso a LED per interni.Corpo in alluminio verniciato ricavato da una fu-sione in gravità. Proiettore equipaggiato con 18 LED 420mA ad alta resa, driver integrato. Driver per stabilizzare la caduta di tensione in caso di cavi lunghi applicando alimentazione a 24V DC. Ottica con 6 lenti minitrittiche e fascio ottico 10°/25°/40°. Grazie alla struttura che sostiene il faretto, si ha una ampia gestione dell’orien-tabilità in tutti i sensi. Fissaggio tramite ghiera con molle. Potenza assorbita: 30W circa. IP40. Verniciato in bianco, nero o grigio. Collegamento in parallelo.BREVETTATO.
Recessed LED spot for interior use.Varnished die-casted aluminum body. Projector with 18 LED 420mA high emission, internal low voltage converter to constant current. The converter is able to compensate the loss in line voltage using 24V DC drivers. Optic with 6 triple lenses with 10°/25°/40° beam angle. Fixation through nut with spring. Power consumption: approximately 30W. IP40. White, black or grey varnish.Parallel connection.PATENTED.
disegni tecnici/technical drawings
IP40 30W20°+-
Ta max 35°C18LED
ø127 ø146
80
finitura grigiogrey finishing
finitura neroblack finishing
finitura biancowhite finishing
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
13400
3350
1480
830
/
/
/
/
0.50
1.00
1.50
2.00
49400
12350
5450
3080
/
/
/
/
0.50
1.00
1.50
2.00
29600
7400
3250
1850
/
/
/
/10° 25° 40°
bianco freddo/cool white
Solo per uso molle
Only for spring fixation
Ø 130 mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
80
interiorinterni
prodotto/product
codice/code
MSMA0118F500GM
MSMA0118F50WGM
MSMA01184500GM
MSMA0118450WGM
MSMA01187500GM
MSMA0118750WGM
MSMA0118F500NE
MSMA0118F50WNE
MSMA01184500NE
MSMA0118450WNE
MSMA01187500NE
MSMA0118750WNE
MSMA0118F500BO
MSMA0118F50WBO
MSMA01184500BO
MSMA0118450WBO
MSMA01187500BO
MSMA0118750WBO
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
tramite ghiera con molle/with spring
finiturafinishing
grigio/grey
grigio/grey
grigio/grey
grigio/grey
grigio/grey
grigio/grey
nero/black
nero/black
nero/black
nero/black
nero/black
nero/black
bianco/white
bianco/white
bianco/white
bianco/white
bianco/white
bianco/white
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
*Esempio schemi di collegamento a p.346 / Example of wiring diagram on p.346
tabella di riepilogo prodotti/ product overview table
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
7
alimentatori/LED drivers
WALIM40W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
applicazioni/applicationsIlluminazione generale di ambienti, locali pubblici e supermercati./General lighting, accent lighting, decorative ligh-ting, public places or supermarket lighting.
81
S.M.A.R RGB incassoalluminio
S.M.A.R RGB recessed aluminum
Faretto da incasso a LED per interni.Corpo in alluminio verniciato ricavato da una fu-sione in gravità. Proiettore equipaggiato con 18 LED RGB ad alta resa, senza driver (utilizzare SLAVE DMX). Ottica fissa con 6 lenti minitritti-che con fascio ottico 10/25/40°. Fissaggio tra-mite ghiera con molle.La sequenza del cambio colore può avvenire automaticamente o a co-mando manuale, agendo direttamente sul Ma-ster o tramite il telecomando (optional). Potenza assorbita: 25W circa. IP40. Verniciato in bianco, nero o grigio.BREVETTATO.
Recessed LED spot for interior use.Varnished die-casted aluminum body. Projector with 18 LED RGB high emission, without driver (to use SLAVE DMX). Fixed optic with 6 triple lenses with 10°/25°/40° beam angle. Fixation through nut with spring. Power consumption: approximately 25W. IP40. White, black or grey varnish.The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.PATENTED.
disegni tecnici/technical drawings
fascio ottico/beam angle
10° 25° 40°
IP40 25W20°+-
Ta max 35°C18LED RGB
ø127 ø146
80
finitura grigiogrey finishing
finitura neroblack finishing
finitura biancowhite finishing
Solo per uso molle
Only for spring fixation
Ø 130 mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
82
tabella di riepilogo prodotti/ product overview table
interior / decorativeinterni / decorativo
prodotto/product
codice/code
MSMA0118F506GM
MSMA01184506GM
MSMA01187506GM
MSMA0118F506NE
MSMA01184506NE
MSMA01187506NE
MSMA0118F506BO
MSMA01184506BO
MSMA01187506BO
colore/colour
RGB
RGB
RGB
RGB
RGB
RGB
RGB
RGB
RGB
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
18
18
18
18
18
18
18
18
18
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°
25°
40°
10°
25°
40°
10°
25°
40°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
ghiera con molle/spring
ghiera con molle/spring
ghiera con molle/spring
ghiera con molle/spring
ghiera con molle/spring
ghiera con molle/spring
ghiera con molle/spring
ghiera con molle/spring
ghiera con molle/spring
finiturafinishing
grigio/grey
grigio/grey
grigio/grey
nero/black
nero/black
nero/black
bianco/white
bianco/white
bianco/white
IP/IP
40
40
40
40
40
40
40
40
40
applicazioni/applicationsIlluminazione generale di ambienti, locali pubblici./General lighting, accent lighting, decorative ligh-ting, public places.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
9
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
*Esempio schemi di collegamento a p.356 / Example of wiring diagram on p.356
codice/code non inclusi/not included
Slave DMX
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
caratteristiche/specifications
n. faretti/n. spots
WSLAVEDMX6X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
Slave DMX
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
1
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB-DMX/controller RGB-DMX
!
Master DMX
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
/
/
/
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
83
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)/ A soffitto tramite kit molle (incluse)
Recessed box Luxcassa 1 (not included p.333)/ Ceiling recessing with spring kit (included)
84
prodotto/product
tabella di riepilogo prodotti/ product overview tablecolore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
fascio ottico/beam angle
110°
110°
110°
110°
110°
110°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
68
68
68
68
68
68
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
560
140
60
35
55
120
200
250
84
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m. /Outdoor signalization, light effects and showers.Uderwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
Solo per uso molle
Only for spring fixation
Ø 35 mm
110°
lux 09_110°ottone cromato satinato
lux 09_110° sanded chromed brass
Faretto LED da incasso stagno per esterni.Corpo in ottone cromato satinato. Dissipatore ter-mico ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di guarnizioni di tenuta per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, con ottica 110° con vetro di protezione e pressa-cavo stagno. Il fissaggio può essere fatto con cas-saforma in plastica (Luxcassa 1) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 110° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box ( Luxcassa 1). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
44
36
62
codice/code
BLUX02010300CS
BLUX0201030WCS
BLUX02010301CS
BLUX02010302CS
BLUX02010303CS
BLUX02010304CS
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
4453
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)/ A soffitto tramite kit molle (incluse)
Recessed box Luxcassa 1 (not included p.333)/ Ceiling recessing with spring kit (included)
outdoor / underwater esterni / immersione
prodotto/product
tabella di riepilogo prodotti/ product overview tablecolore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
fascio ottico/beam angle
60°
60°
60°
60°
60°
60°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
68
68
68
68
68
68
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
880
220
95
55
35
60
90
120
85
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m. /Outdoor signalization, light effects and showers.Uderwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 09_60°ottone cromato satinato
lux 09_60° sanded chromed brass
Faretto LED da incasso stagno per esterni.Corpo in ottone cromato satinato. Dissipatore ter-mico ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di guarnizioni di tenuta per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, con lente da 60° con vetro di protezione e pressa-cavo stagno. Il fissaggio può essere fatto con cas-saforma in plastica (Luxcassa 1) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 60° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box ( Luxcassa 1). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
codice/code
BLUX02016300CS
BLUX0201630WCS
BLUX02016301CS
BLUX02016302CS
BLUX02016303CS
BLUX02016304CS
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
60°
Solo per uso molle
Only for spring fixation
Ø 35 mm44
36
62
4453
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
86
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX0201F300CS
BLUX0201F30WCS
BLUX0201F301CS
BLUX0201F302CS
BLUX0201F303CS
BLUX0201F304CS
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
fascio ottico/beam angle
10°*
10°*
10°*
10°*
10°*
10°*
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
68
68
68
68
68
68
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
14000
3500
1550
875
5
10
14
18
86
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 10ottone cromato satinato
lux 10 sanded chromed brass
Faretto LED da incasso stagno per esterni.Corpo in ottone cromato satinato. Dissipatore ter-mico ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di guarnizioni di tenuta per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, con lente da 10° con vetro di protezione e pressa-cavo stagno. Il fissaggio può essere fatto con cas-saforma in plastica (Luxcassa 1) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 10° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 1). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
10°
4453
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m. /Outdoor signalization, light effects and showers.Uderwater application: maximal depth 1m.
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)/ A soffitto tramite kit molle (incluse)
Recessed box Luxcassa 1 (not included p.333)/ Ceiling recessing with spring kit (included)
Solo per uso molle
Only for spring fixation
Ø 35 mm44
36
62
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX02014300CS
BLUX0201430WCS
BLUX02014301CS
BLUX02014302CS
BLUX02014303CS
BLUX02014304CS
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
fascio ottico/beam angle
25°*
25°*
25°*
25°*
25°*
25°*
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
68
68
68
68
68
68
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
7872
1968
875
492
15
20
28
35
87
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 11ottone cromato satinato
lux 11 sanded chromed brass
Faretto LED da incasso stagno per esterni.Corpo in ottone cromato satinato. Dissipatore ter-mico ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di guarnizioni di tenuta per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, con lente da 25° con vetro di protezione e pressa-cavo stagno. Il fissaggio può essere fatto con cas-saforma in plastica (Luxcassa 1) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 25° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 1). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
25°
4453
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m. /Outdoor signalization, light effects and showers.Uderwater application: maximal depth 1m.
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)/ A soffitto tramite kit molle (incluse)
Recessed box Luxcassa 1 (not included p.333)/ Ceiling recessing with spring kit (included)
Solo per uso molle
Only for spring fixation
Ø 35 mm44
36
62
outdoor / underwater esterni / immersione
accessori/accessoriesCassaforma Luxcassa 5 (non inclusa p.333)
Recessed installation box Luxcassa 5 (not included p.333)
88
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX05013500CS
BLUX0501350WCS
BLUX05013501CS
BLUX05013502CS
BLUX05013503CS
BLUX05013504CS
colore/colour
cool white*
warm white*
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
fascio ottico/beam angle
45°
45°
45°
45°
45°
45°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
accessori/accessories
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
IP/IP
68
68
68
68
68
68
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
1744
436
194
109
22
44
65
87
88
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m./Outdoor signalization, light effects ad showers.Uderwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 12ottone cromato satinato
lux 12 sanded chromed brass
Micro faretto LED da incasso stagno per esterni.Corpo in ottone cromato satinato e tecnopoli-mero. Dissipatore termico ricavato da billetta per ottimizzare la dispersione del calore, com-pleto di guarnizioni di tenuta per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, dotato di ottica con lente da 45° e pressacavo stagno. Il fissaggio può essere fatto con cassaforma in plastica (Luxcassa 5). IP68. NON pedonabile.
Recessed micro LED spot for outdoor use.Sanded chromed brass and techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 45° beam angle, waterproof cable gland. To fix the spot use plastic box (Luxcassa 5). IP68. DO NOT walk over.
45°
ø2641
Ø26
Ø20,8
45
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
IP68 1,2W
Solo per uso O-Ring
Only for O-Ring fixation
Ø 21 mm
*Disponibile in versione neutral white su richiesta. / Neutral white LED on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
Ta max 35°C Ta min -20°C1mmax
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
accessori/accessoriesCassaforma Luxcassa 5 (non inclusa p.333)
Recessed installation box Luxcassa 5 (not included p.333)
prodotto/product
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUX05010500CS
BLUX0501050WCS
BLUX05010501CS
BLUX05010502CS
BLUX05010503CS
BLUX05010504CS
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
fascio ottico/beam angle
110°
110°
110°
110°
110°
110°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
accessori/accessories
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
IP/IP
68
68
68
68
68
68
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
506
126
56
32
50
70
90
110
89
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento.Montaggio in immersione: profondità massima 1m./Outdoor signalization, light effects.Uderwater application: maximal depth 1m
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 12 pedonabileottone cromato satinato
lux 12 walk over sanded chromed brass
Micro faretto LED da incasso stagno per esterni.Corpo in ottone cromato satinato e tecnopoli-mero. Dissipatore termico ricavato da billetta per ottimizzare la dispersione del calore, com-pleto di guarnizioni di tenuta per il fissaggio. 1 LED 1,2W 350mA ad alta resa. Dotato di ottica fissa da 110° e pressacavo stagno in materiale sintetico.Il fissaggio avviene tramite cassaforma in ABS (Luxcassa 5) non inclusa. IP68.Pedonabile.
Recessed micro LED spot for outdoor use.Sanded chromed brass and techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with o-ring. 1 LED 1,2W 350mA high emission with 110° optic, waterproof synthetic cable gland. To fix the spot use plastic box (Luxcassa 5) not included. IP68. Walk over.
45 ø26
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
110°
Ø26
Ø20,8
45
*Disponibile in versione neutral white su richiesta./ Neutral white on demand.
outdoor / underwater esterni / immersione
lux 12 Sottone cromato satinato
lux 12 S sanded chromed brass
Micro faretto LED da incasso per interni/esterni. Corpo in ottone cromato satinato e tecnopoli-mero. Dissipatore termico ricavato da billetta per ottimizzare la dispersione del calore. 1 LED 1,2W 350mA ad alta resa. Fascio ottico da 45° e pressacavo stagno in materiale sintetico. Il fissaggio avviene tramite molle in acciaio sago-mate. IP65. NON pedonabile.
Recessed micro LED spot for interior/outdoor use.Sanded chromed brass and techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation. 1 LED 1,2W 350mA high emission with 45° beam angle, waterproof synthetic cable gland. Fixation with stainelss steel spring. IP65. Do not walk over.
45°
41
disegni tecnici/technical drawings illuminamento/illumination
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
1744
436
194
109
22
44
65
87
bianco freddo/cool white
ø26
Ta min -20°CTa max 35°CIP65 1,2W
Solo per uso molle
Only for spring fixation
Ø 21 mm
montaggio/installationA soffitto tramite kit molle (incluso)
Ceiling recessing with spring kit (included)
90
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUXS5013500CS
BLUXS501350WCS
BLUXS5013501CS
BLUXS5013502CS
BLUXS5013503CS
BLUXS5013504CS
colore/colour
cool white*
warm white*
blu/blue*
verde/green*
ambra/amber*
rosso/red*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
ottone/
brass
ottone/
brass
ottone/
brass
ottone/
brass
ottone/
brass
ottone/
brass
fascio ottico/beam angle
45°
45°
45°
45°
45°
45°
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissaggio/fixing
con molle/
with spring
con molle/
with spring
con molle/
with spring
con molle/
with spring
con molle/
with spring
con molle/
with spring
IP/IP
65
65
65
65
65
65
applicazioni/applicationsIlluminazione d’effetto e d’accento. Fissaggio a soffitto o a parete./Signalization, light effects. Ceiling/wall mounting.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
*Disponibile in versione neutral white su richiesta./ Neutral white on demand. 91
outdoor esterni
9292
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)
Recessed installation box Luxcassa 1 (not included p.333)
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX02012300CS
BLUX0201230WCS
BLUX02012301CS
BLUX02012302CS
BLUX02012303CS
BLUX02012304CS
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
fascio ottico/beam angle
asimmetrico/asymmetric
asimmetrico/asymmetric
asimmetrico/asymmetric
asimmetrico/asymmetric
asimmetrico/asymmetric
asimmetrico/asymmetric
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
65
65
65
65
65
65
disegni tecnici/technical drawings
applicazioni/applicationsIlluminazione di gradini, segnapasso laterale per esterni, illuminazione d’effetto e d’accento./For lighting stair cases, steps or paths, outdoor signalizations, light effects.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
44
36
62
lux 35ottone cromato satinato
lux 35 sanded chromed brass
Faretto LED da incasso per esterni.Corpo in ottone cromato satinato. Dissipatore termico ricavato da billetta per ottimizzare la di-spersione del calore, completo di O-ring per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, dotato di lente asimmetrica, vetro di protezione e pressacavo. Fissaggio tramite cassaforma in plastica (Luxcassa 1). IP65. NON pedonabile.
Recessed LED spot for outdoor use.Body in sanded chromed brass. Thermal dissipator machined from a solid rod to optimize heat dissipation. Equipped with rubber O-ring for fixation. 1 LED 1,2W 350mA high emission, with asymmetric beam, protective glass and cable gland. Fixation with recessed plastic installation box (Luxcassa 1). IP65. DO NOT walk over.
44
50
44
Ta min -20°CTa max 35°CIP65 1,2W
accessori/accessoriesCassaforma Luxcassa 5 (non inclusa p.333)
Recessed installation box Luxcassa 5 (not included p.333)
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX06012500CS
BLUX0601250WCS
BLUX06012501CS
BLUX06012502CS
BLUX06012503CS
BLUX06012504CS
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
fascio ottico/beam angle
asimmetrico/asymmetric
asimmetrico/asymmetric
asimmetrico/asymmetric
asimmetrico/asymmetric
asimmetrico/asymmetric
asimmetrico/asymmetric
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
accessori/accessories
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
IP/IP
65
65
65
65
65
65
disegni tecnici/technical drawings
93
applicazioni/applications
Illuminazione di gradini, segnapasso laterale per esterni, illuminazione d’effetto e d’accento./For lighting stair cases, steps or paths, outdoor signalizations, light effects.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 36ottone cromato satinato
lux 36 sanded chromed brass
Faretto LED da incasso per esterni.Corpo in ottone cromato satinato. Dissipatore termico ricavato da billetta per ottimizzare la di-spersione del calore, completo di O-ring per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, dotato di lente asimmetrica, vetro di protezione e pressacavo. Fissaggio tramite cassaforma in plastica (Luxcassa 5). IP65. NON pedonabile.
Recessed LED spot for outdoor use.Body in sanded chromed brass. Thermal dissipator machined from a solid rod to optimize heat dissipation. Equipped with rubber O-ring for fixation. 1 LED 1,2W 350mA high emission, with asymmetric beam, protective glass and cable gland. Fixation with recessed plastic installation box (Luxcassa 5). IP65. DO NOT walk over.
26
49
43
Ø26
Ø20,8
45
Solo per uso O-Ring
Only for O-Ring fixation
Ø 21mm
Ta min -20°CTa max 35°CIP65 1,2W
outdoor esterni
94
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90
94
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
25°
lux 20_25°ottone cromato satinato
lux 20_25° sanded chromed brass
Faretto LED da incasso stagno per esterni.Corpo in ottone cromato satinato. Dissipatore ter-mico ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di guarnizioni di tenuta per il fissaggio. 3 LED da 1,2W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 25°, vetro di protezione e pressacavo stagno. Il fissag-gio può essere fatto con cassaforma in plastica (Luxcassa 3) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su con-trosoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 3 LED 1,2W 350mA high emission, 25° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 3). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
Ø57
Ø49
67
accessori/accessoriesCassaforma Luxcassa 3 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed box Luxcassa 3 (not included p.333)/ Ceiling recessing with spring kit (included)
Solo per uso molle
Only for spring fixation
Ø 48 mm
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX01034300CS
BLUX0103430WCS
colore/colour
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
ottone/
brass
ottone/
brass
fascio ottico/beam angle
25°*
25°*
ottica/optic
fissa/
fixed
fissa/
fixed
fissaggio/fixing
cassaforma,
kit molle/
box, spring kit
cassaforma,
kit molle/
box, spring kit
accessori/accessories
Luxcassa 3
Luxcassa 3
IP/IP
68
68
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
5754
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
Ta max 35°C Ta min -20°C1mmaxIP68 3x1,2W
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m. /Outdoor signalization, light effects and showers.Uderwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
Ø57
Ø49
67
accessori/accessoriesCassaforma Luxcassa 3 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed box Luxcassa 3 (not included p.333)/ Ceiling recessing with spring kit (included)
Solo per uso molle
Only for spring fixation
Ø 48 mm
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
12640
3160
1404
790
20
30
45
65
95
10°
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0103F300CS
BLUX0103F30WCS
colore/colour
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
ottone/
brass
ottone/
brass
fascio ottico/beam angle
10°*
10°*
ottica/optic
fissa/
fixed
fissa/
fixed
fissaggio/fixing
cassaforma,
kit molle/
box, spring kit
cassaforma,
kit molle/
box, spring kit
accessori/accessories
Luxcassa 3
Luxcassa 3
IP/IP
68
68
lux 20_10°ottone cromato satinato
lux 20_10° sanded chromed brass
Faretto LED da incasso stagno per esterni.Corpo in ottone cromato satinato. Dissipatore ter-mico ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di guarnizioni di tenuta per il fissaggio. 3 LED da 1,2W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 10°, vetro di protezione e pressacavo stagno. Il fissag-gio può essere fatto con cassaforma in plastica (Luxcassa 3) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su con-trosoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 3 LED 1,2W 350mA high emission, 10° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 3). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
5754
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
Ta max 35°C Ta min -20°C1mmaxIP68 3x1,2W
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m. /Outdoor signalization, light effects and showers.Uderwater application: maximal depth 1m.
outdoor / underwater esterni / immersione
9696
accessori/accessoriesCassaforma Luxcassa 3 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed installation box Luxcassa 3 (not included p.333)/ Ceiling recessing with spring kit (included)
disegni tecnici/technical drawings fascio ottico/beam angle
25°
lux 20_25° RGBottone cromato satinato
lux 20_25° RGB sanded chromed brass
Faretto LED da incasso stagnoper esterni.Corpo in ottone cromato satinato. Dissipatore termico ricavato da billetta per ottimizzare la di-spersione del calore, completo di guarnizioni di tenuta per il fissaggio. 3 LED RGB da 1W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 25°, vetro di protezione e pres-sacavo stagno. Il fissaggio può essere fatto con cassaforma in plastica (Luxcassa 3) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti.La sequenza dinamica del cambio colore può av-venire automaticamente o a comando manuale agendo direttamente sul master o tramite tele-comando. IP68.Pedonabile.Utilizzare alimentazione 12V in immersione.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 3 LED RGB 1W 350mA high emission, 25° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 3). To install the spot in false ceiling use the steel fixation spring. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP68. Walk over.When used in submerged applications, use only a 12V DMX system.
5754
Ø57
Ø49
67
Solo per uso molle
Only for spring fixation
Ø 48 mm
Ta max 35°C Ta min -20°C1mmaxRGBIP68 3x1W
prodotto/product
tabella di riepilogo prodotti/ product overview table
97
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m./Outdoor signalization, light effects ad showers.Uderwater application: maximal depth 1m.
codice/code
BLUX01034306CS
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
ottone/
brass
fascio ottico/beam angle
25°*
ottica/optic
fissa/
fixed
fissaggio/fixing
cassaforma/
kit molle/
box/ spring kit
accessori/accessories
telecomando/
remote control/
Luxcassa 3
IP/IP
68
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
In immersione con sistema DMX/ Submerged applications with DMX system
Non in immersione/ Not for submerged applications
outdoor / underwater / decorativeesterni / immersione / decorativo
lux 20_10° RGBottone cromato satinato
lux 20_10° RGB sanded chromed brass
disegni tecnici/technical drawings fascio ottico/beam angle
575410°
Faretto LED da incasso stagnoper esterni.Corpo in ottone cromato satinato. Dissipatore termico ricavato da billetta per ottimizzare la di-spersione del calore, completo di guarnizioni di tenuta per il fissaggio. 3 LED RGB da 1W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 10°, vetro di protezione e pres-sacavo stagno. Il fissaggio può essere fatto con cassaforma in plastica (Luxcassa 3) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti.La sequenza dinamica del cambio colore può av-venire automaticamente o a comando manuale agendo direttamente sul master o tramite tele-comando. IP68.Pedonabile.Utilizzare alimentazione 12V in immersione.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 3 LED RGB 1W 350mA high emission, 10° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 3). To install the spot in false ceiling use the steel fixation spring. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP68.Walk over.When used in submerged applications, use only a 12V DMX system.
Ta max 35°C Ta min -20°C1mmaxRGBIP68 3x1W
accessori/accessoriesCassaforma Luxcassa 3 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed installation box Luxcassa 3 (not included p.333)/ Ceiling recessing with spring kit (included)
Ø57
Ø49
67
Solo per uso molle
Only for spring fixation
Ø 48 mm
98
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0103F306CS
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
ottone/
brass
fascio ottico/beam angle
10°*
ottica/optic
fissa/
fixed
IP/IP
68
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m./Outdoor signalization, light effects ad showers.Uderwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
In immersione con sistema DMX/ Submerged applications with DMX system
Non in immersione/ Not for submerged applications
fissaggio/fixing
cassaforma/
kit molle/
box/ spring kit
accessori/accessories
telecomando/
remote control/
Luxcassa 3
99
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
outdoor / underwater / decorativeesterni / immersione / decorativo
100100
disegni tecnici/technical drawings
lux 20 opale RGBottone cromato satinato
lux 20 opal RGB sanded chromed brass
Faretto LED da incasso stagnoper esterni.Corpo in ottone cromato satinato completo di guarnizioni di tenuta per il fissaggio. Dissipato-re termico ricavato da billetta per ottimizzare la dispersione del calore. 3 LED RGB 1W 350mA ad alta resa. Diffusore in vetro opalino e pressa-cavo stagno in materiale sintetico. Il fissaggio avviene tramite cassaforma in ABS (Luxcassa 3) o tramite molle sagomate in acciaio incluse, nel caso di montaggio su controsoffitti. La sequen-za dinamica del cambio colore può avvenire au-tomaticamente o a comando manuale agendo direttamente sul master o tramite telecomando. IP68. IK10. Pedonabile.Utilizzare alimentazione 12V in immersione.
Recessed LED spot for outdoor.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with o-ring. 3 LED RGB 1W 350mA high emission, opal glass and waterproof synthetic cable gland.To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 3). To install the spot in false ceiling use the steel fixation spring. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP68. IK10. Walk over.When used in submerged applications, use only a 12V DMX system.
5754
Ta max 35°C Ta min -20°C1mmaxRGBIP68 3x1W
accessori/accessoriesCassaforma Luxcassa 3 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed installation box Luxcassa 3 (not included p.333)/ Ceiling recessing with spring kit (included)
Ø57
Ø49
67
Solo per uso molle
Only for spring fixation
Ø 48 mm
101
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0103G505CS
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
ottone/
brass
ottica/optic
fissa/
fixed
IP/IP
68
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
fissaggio/fixing
cassaforma/
kit molle/
box/ spring kit
accessori/accessories
telecomando/
remote control/
Luxcassa 3
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento e docce.Montaggio in immersione: profondità massima 1m./Outdoor signalization, light effects ad showers.Uderwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
In immersione con sistema DMX/ Submerged applications with DMX system
Non in immersione/ Not for submerged applications
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
outdoor / underwater / decorativeesterni / immersione / decorativo
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
11136
2784
1237
696
8
16
24
32
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento./Outdoor signalization, light effects.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
25°
lux 10R_25°ottone cromato satinato
lux 10R_25° sanded chromed brass
Faretto LED da incassoper interni ed esterni.Corpo in ottone cromato satinato. Dissipatore termico ricavato da billetta per ottimizzare la di-spersione del calore, completo di guarnizioni di tenuta per il fissaggio. 3 LED 1,2W 350mA ad alta resa. Dotato di lente minitrittica con fascio ottico da 25°, vetro di protezione e pressacavo stagno in materiale sintetico. Il fissaggio avvie-ne tramite cassaforma in ABS (Luxcassa 1) non inclusa. IP67. Pedonabile.
Recessed LED spotfor interior and outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with o-ring. 3 LED 1,2W 350 mA high emission, with 25° beam angle, glass protection and waterproof synthetic cable gland. To fix the spot, use plastic box (Luxcassa 1) not included. IP67. Walk over.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX02034500CS
BLUX0203450WCS
colore/colour
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
ottone/
brass
ottone/
brass
fascio ottico/beam angle
25°*
25°*
ottica/optic
fissa/
fixed
fissa/
fixed
fissaggio/fixing
cassaforma/
box
cassaforma/
box
accessori/accessories
Luxcassa 1
Luxcassa 1
IP/IP
67
67
ø4460
Ta max 35°CIP67 3x1,2W
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*Disponibile in versione neutral white e/o con lente 40° su richiesta. / Neutral white version and/or with 40° lens on demand.
Ta min -20°C
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)
Recessed installation box Luxcassa 1 (not included p.333)44
36
62
102
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
20600
5160
1970
1290
6
11
17
22
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento./Outdoor signalization, light effects.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 10R_10°ottone cromato satinato
lux 10R_10° sanded chromed brass
Faretto LED da incassoper interni ed esterni.Corpo in ottone cromato satinato. Dissipatore termico ricavato da billetta per ottimizzare la di-spersione del calore, completo di guarnizioni di tenuta per il fissaggio. 3 LED 1,2W 350mA ad alta resa. Dotato di lente minitrittica con fascio ottico da 10°, vetro di protezione e pressacavo stagno in materiale sintetico. Il fissaggio avvie-ne tramite cassaforma in ABS (Luxcassa 1) non inclusa. IP67. Pedonabile.
Recessed LED spotfor interior and outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with o-ring. 3 LED 1,2W 350 mA high emission, with 10° beam angle, glass protection and waterproof synthetic cable gland. To fix the spot, use plastic box (Luxcassa 1) not included. IP67. Walk over.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0203F500CS
BLUX0203F50WCS
colore/colour
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
ottone/
brass
ottone/
brass
fascio ottico/beam angle
10°*
10°*
ottica/optic
fissa/
fixed
fissa/
fixed
fissaggio/fixing
cassaforma/
box
cassaforma/
box
accessori/accessories
Luxcassa 1
Luxcassa 1
IP/IP
67
67
10°
Ta max 35°CIP67 3x1,2W
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*Disponibile in versione neutral white e/o con lente 40° su richiesta. / Neutral white version and/or with 40° lens on demand.
ø4460
Ta min -20°C
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)
Recessed installation box Luxcassa 1 (not included p.333)44
36
62
103
outdoor esterni
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)
Recessed installation box Luxcassa 1 (not included p.333)
disegni tecnici/technical drawings
lux 10R_25° RGBottone cromato satinato
lux 10R_25° RGB sanded chromed brass
Faretto LED da incassoper interni ed esterni.Corpo in ottone cromato satinato. Dissipatore ter-mico ricavato da billetta per ottimizzare la disper-sione del calore, completo di guarnizioni di tenuta per il fissaggio. 3 LED RGB 1W 350mA ad alta resa. Dotato di lente minitrittica con fascio ottico da 25°, vetro di protezione e pressacavo stagno in materiale sintetico. Il fissaggio avviene tramite cassaforma in ABS (Luxcassa 1) non inclusa. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando manuale agendo direttamente sul master o tramite telecomando. IP67. Pedonabile.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with o-ring. 3 LED RGB 1W 350 mA high emission, with 25° beam angle, glass protection and waterproof synthetic cable gland. To fix the spot, use plastic box (Luxcassa 1) not included. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP67. Walk over.
fascio ottico/beam angle
25°
Ta max 35°CRGBIP67 3x1W
ø4460
Ta min -20°C
44
36
62
104
prodotto/product
tabella di riepilogo prodotti/ product overview table
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento./Outdoor signalization, light effects.
codice/code
BLUX02034506CS
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
ottone/
brass
ottica/optic
fissa/
fixed
fascio ottico/beam angle
25°*
fissaggio/fixing
cassaforma/
box
accessori/accessories
telecomando/
remote control,
Luxcassa 1
IP/IP
67
*Disponibile con lente da 40°./ 40° lens version on demand.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
105
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
outdoor / decorativeesterni / decorativo
disegni tecnici/technical drawings
lux 10R_10° RGBottone cromato satinato
lux 10R_10° RGB sanded chromed brass
fascio ottico/beam angle
10°ø4460
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)
Recessed installation box Luxcassa 1 (not included p.333)
Faretto LED da incassoper interni ed esterni.Corpo in ottone cromato satinato. Dissipatore termico ricavato da billetta per ottimizzare la di-spersione del calore, completo di guarnizioni di tenuta per il fissaggio. 3 LED RGB 1W 350mA ad alta resa. Dotato di lente minitrittica con fa-scio ottico da 10°, vetro di protezione e pressa-cavo stagno in materiale sintetico. Il fissaggio avviene tramite cassaforma in ABS (Luxcassa 1) non inclusa. La sequenza dinamica del cambio colore può avvenire automaticamente o a co-mando manuale agendo direttamente sul ma-ster o tramite telecomando. IP67.Pedonabile.
Recessed LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, with o-ring. 3 LED RGB 1W 350 mA high emission, with 10° beam angle, glass protection and waterproof synthetic cable gland. To fix the spot, use plastic box (Luxcassa 1) not included. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP67. Walk over.
Ta max 35°CRGBIP67 3x1W Ta min -20°C
44
36
62
106
prodotto/product
tabella di riepilogo prodotti/ product overview table
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento./Outdoor signalization, light effects.
codice/code
BLUX0203F506CS
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
03
fissaggio/fixing
cassaforma/
box
accessori/accessories
telecomando/
remote control,
Luxcassa 1
IP/IP
67
*Disponibile con lente da 40°./ 40° lens version on demand.
tipo di LED/LED type
alta emissione/
high emission
materiale/material
ottone/
brass
ottica/optic
fissa/
fixed
fascio ottico/beam angle
10°*
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
107
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
outdoor / decorativeesterni / decorativo
108108
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento.Non installare nelle vicinanze del mare, di aria salmastra, cloro oacque sulfuree./Outdoor signalization, light effects.Do not install nearby the sea, salt air, chlorine or sulphurous water.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX02034300NX
BLUX0203430WNX
colore/colour
cool white*
warm white*
tipo/type
interni/esterni/
interior/outdoor
interni/esterni/
interior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
acciaio inox e alluminio/
stainless steel and aluminum
acciaio inox e alluminio/
stainless steel and aluminum
fascio ottico/beam angle
25°*
25°*
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
cassaforma/ box
cassaforma/ box
accessori/accessories
Boxskill 1
Boxskill 1
IP/IP
67
67
lux 29_25°alluminio e acciaio inox
lux 29_25° aluminum and stainless steel
Faretto LED da incassoper esterni orientabile.Corpo esterno in fusione di alluminio con ghiera di chiusura superiore in acciaio inox AISI 303 finitura satinata. 3 LED da 1,2W 350 mA ad alta resa col-locati all’interno di un corpo in alluminio pieno, con alettature posteriori, ricavato da billetta per ottimizza-re la dispersione del calore, con pressacavo stagno. Ottica orientabile dotata di lente a tre comparti con fascio ottico da 25° con vetro di protezione, comple-ta di ghiera di chiusura. Due ghiere in alluminio con fissaggio a vite, permettono di bloccare l’ottica nella posizione di orientamento prescelta. Il fissaggio av-viene tramite cassaforma (Boxskill 1). IP67.Pedonabile.
Recessed and adjustable LED spotfor outdoor use.Aluminum body with stainless steel AISI 303, san-ded finish decorative rim. 3 LED 1,2W 350 mA high emission, positioned in an aluminum heat dissipator machined from a solid rod to optimize heat dissipa-tion. Waterproof cable gland. Adjustable optic with triple lens 25° beam angle, glass protection and de-corative rim. Optic can be fixed in the desired orien-tation by means of two small screws. Box (Boxskill 1) to fix the spot. IP67. Walk over.
accessori/accessoriesCassaforma Boxskill 1 (non inclusa p.333)
Recessed installation box Boxskill 1 (not included p.333)
Ø142
100
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.Possibilità di alimentazione a 700mA. / It can work at 700mA.
3x1,2WIP6715°+-
25°
Ta max 35°C
ø105
83
Ta min -20°C
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
12640
3160
1404
790
20
30
45
65
109
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento.Non installare nelle vicinanze del mare, di aria salmastra, cloro oacque sulfuree./Outdoor signalization, light effects.Do not install nearby the sea, salt air, chlorine or sulphurous water.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0203F300NX
BLUX0203F30WNX
colore/colour
cool white*
warm white*
tipo/type
interni/esterni/
interior/outdoor
interni/esterni/
interior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
acciaio inox e alluminio/
stainless steel and aluminum
acciaio inox e alluminio/
stainless steel and aluminum
fascio ottico/beam angle
10°*
10°*
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
cassaforma/ box
cassaforma/ box
accessori/accessories
Boxskill 1
Boxskill 1
IP/IP
67
67
lux 29_10°alluminio e acciaio inox
lux 29_10° aluminum and stainless steel
Faretto LED da incassoper esterni orientabile.Corpo esterno in fusione di alluminio con ghiera di chiusura superiore in acciaio inox AISI 303 finitura satinata. 3 LED da 1,2W 350 mA ad alta resa col-locati all’interno di un corpo in alluminio pieno, con alettature posteriori, ricavato da billetta per ottimizza-re la dispersione del calore, con pressacavo stagno. Ottica orientabile dotata di lente a tre comparti con fascio ottico da 10° con vetro di protezione, comple-ta di ghiera di chiusura. Due ghiere in alluminio con fissaggio a vite, permettono di bloccare l’ottica nella posizione di orientamento prescelta. Il fissaggio av-viene tramite cassaforma (Boxskill 1). IP67.Pedonabile.
Recessed and adjustable LED spotfor outdoor use.Aluminum body with stainless steel AISI 303, san-ded finish decorative rim. 3 LED 1,2W 350 mA high emission, positioned in an aluminum heat dissipator machined from a solid rod to optimize heat dissipa-tion. Waterproof cable gland. Adjustable optic with triple lens 10° beam angle, glass protection and de-corative rim. Optic can be fixed in the desired orien-tation by means of two small screws. Box (Boxskill 1) to fix the spot. IP67. Walk over.
accessori/accessoriesCassaforma Boxskill 1 (non inclusa p.333)
Recessed installation box Boxskill 1 (not included p.333)
Ø142
100
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.Possibilità di alimentazione a 700mA. / It can work at 700mA.
10°
3x1,2WIP6715°+-
Ta max 35°C
ø105
83
Ta min -20°C
outdooresterni
110110
disegni tecnici/technical drawings
lux 29_25° RGBalluminio e acciaio inox
lux 29_25° RGBaluminum and stainless steel
Faretto LED da incasso stagnoper esterni orientabile.Corpo esterno in fusione di alluminio con ghiera di chiusura superiore in acciaio inox AISI 303 finitura satinata. 3 LED RGB da 1W 350 mA ad alta resa collocati all’interno di un corpo in allu-minio pieno, con alettature posteriori, ricavato da billetta per ottimizzare la dispersione del ca-lore, con pressacavo stagno. Ottica orientabile dotata di lente a tre comparti con fascio otti-co da 25° con vetro di protezione, completa di ghiera di chiusura. Due ghiere in alluminio con fissaggio a vite, permettono di bloccare l’otti-ca nella posizione di orientamento prescelta. Il fissaggio avviene tramite cassaforma (Boxskill 1). La sequenza dinamica del cambio colore può avvenire automaticamente o a coman-do manuale agendo direttamente sul master o tramite telecomando. IP67. Pedonabile.
Recessed and adjustable LED spotfor outdoor use.Aluminum body with stainless steel AISI 303, sanded finish decorative rim. 3 LED RGB 1W 350 mA high emission, positioned in an aluminum heat dissipator machined from a solid rod to optimize heat dissipation. Waterproof cable gland. Adjustable optic with triple lens 25° beam angle, glass protection and decorative rim. Optic can be fixed in the desired orientation by means of two small screws. Box (Boxskill 1) to fix the spot. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP67. Walk over.
25°
accessori/accessoriesCassaforma Boxskill 1 (non inclusa p.333)
Recessed installation box Boxskill 1 (not included p.333)
IP67 3x1W15°+-
RGB
fascio ottico/beam angle
Ta max 35°C
Ø142
100
ø105
83
Ta min -20°C
prodotto/product
tabella di riepilogo prodotti/ product overview table
111
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento.Non installare nelle vicinanze del mare, di aria salmastra, cloro oacque sulfuree./Outdoor signalization, light effects.Do not install nearby the sea, salt air, ch-lorine or sulphurous water.
codice/code
BLUX02034306NX
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
acciaio inox
e alluminio/
stainless steel
and aluminum
fascio ottico/beam angle
10°*
ottica/optic
orientabile/
adjustable
fissaggio/fixing
cassaforma/ box
accessori/accessories
telecomando/
remote control,
Boxskill 1
IP/IP
67
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
outdoor / decorativeesterni / decorativo
112112
lux 29_10° RGBalluminio e acciaio inox
lux 29_10° RGBaluminum and stainless steel
disegni tecnici/technical drawings
accessori/accessoriesCassaforma Boxskill 1 (non inclusa p.333)
Recessed installation box Boxskill 1 (not included p.333)
fascio ottico/beam angle
10°
Ø142
100
ø105
83
Faretto LED da incasso stagno per esterni orientabile.Corpo esterno in fusione di alluminio con ghiera di chiusura superiore in acciaio inox AISI 303 fini-tura satinata. 3 LED RGB da 1W 350 mA ad alta resa collocati all’interno di un corpo in alluminio pieno, con alettature posteriori, ricavato da billet-ta per ottimizzare la dispersione del calore, con pressacavo stagno. Ottica orientabile dotata di lente a tre comparti con fascio ottico da 10° con vetro di protezione, completa di ghiera di chiu-sura. Due ghiere in alluminio con fissaggio a vite, permettono di bloccare l’ottica nella posizione di orientamento prescelta. Il fissaggio avviene tramite cassaforma (Boxskill 1). La sequenza dinamica del cambio colore può avvenire automaticamente o a comando manuale agendo direttamente sul ma-ster o tramite telecomando. IP67. Pedonabile.
Recessed and adjustable LED spot for outdoor use.Aluminum body with stainless steel AISI 303, san-ded finish decorative rim. 3 LED RGB 1W 350 mA high emission, positioned in an aluminum heat dis-sipator machined from a solid rod to optimize heat dissipation. Waterproof cable gland. Adjustable op-tic with triple lens 10° beam angle, glass protection and decorative rim. Optic can be fixed in the desired orientation by means of two small screws. Box (Bo-xskill 1) to fix the spot. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP67. Walk over.
IP67 3x1W15°+-
RGB Ta max 35°C Ta min -20°C
prodotto/product
tabella di riepilogo prodotti/ product overview table
113
codice/code
BLUX0203F306NX
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
acciaio inox
e alluminio/
stainless steel
and aluminum
fascio ottico/beam angle
10°*
ottica/optic
orientabile/
adjustable
fissaggio/fixing
cassaforma/ box
accessori/accessories
telecomando/
remote control,
Boxskill 1
IP/IP
67
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento.Non installare nelle vicinanze del mare, di aria salmastra, cloro oacque sulfuree./Outdoor signalization, light effects.Do not install nearby the sea, salt air, ch-lorine or sulphurous water.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
outdoor / decorativeesterni / decorativo
114
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX02010300TF
BLUX0201030WTF
BLUX02010301TF
BLUX02010302TF
BLUX02010303TF
BLUX02010304TF
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
fascio ottico/beam angle
110°
110°
110°
110°
110°
110°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
68
68
68
68
68
68
114
applicazioni/applications
In immersione e in ambienti con presenza di acqua marina, imbarcazioni e docce. Montaggio in immersione: profondità max 1m. /Underwater, in sea water and boats, showers.Underwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 09_110° TFtecnopolimero
lux 09_110° TF techno-polymer
Faretto LED da incasso stagno per esterni.Corpo in tecnopolimero. Dissipatore termico rica-vato da billetta per ottimizzare la dispersione del calore, completo di guarnizioni di tenuta per il fis-saggio. 1 LED da 1,2W 350 mA ad alta resa, con ottica da 110°, con vetro di protezione e pressa-cavo stagno. Il fissaggio può essere fatto con cas-saforma in plastica (Luxcassa 1) o tramite le molle sagomate in acciaio incluse, in caso di montaggio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 110° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box ( Luxcassa 1). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
560
140
60
35
55
120
200
250110°
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed box Luxcassa 1 (not included p.333)/ Ceiling recessing with spring kit (included)
Solo per uso molle
Only for spring fixation
Ø 35 mm44
36
62
4453
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX02016300TF
BLUX0201630WTF
BLUX02016301TF
BLUX02016302TF
BLUX02016303TF
BLUX02016304TF
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
fascio ottico/beam angle
60°
60°
60°
60°
60°
60°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
68
68
68
68
68
68
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
880
220
95
55
35
60
90
120
115
applicazioni/applications
In immersione e in ambienti con presenza di acqua marina, imbarcazioni e docce. Montaggio in immersione: profondità max 1m. /Underwater, in sea water and boats, showers.Underwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 09_60° TFtecnopolimero
lux 09_60° TF techno-polymer
Faretto LED da incasso stagno per esterni.Corpo in tecnopolimero. Dissipatore termico rica-vato da billetta per ottimizzare la dispersione del calore, completo di guarnizioni di tenuta per il fis-saggio. 1 LED da 1,2W 350 mA ad alta resa, con lente da 60°, con vetro di protezione e pressacavo stagno. Il fissaggio può essere fatto con cassafor-ma in plastica (Luxcassa 1) o tramite le molle sa-gomate in acciaio incluse, in caso di montaggio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 60° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box ( Luxcassa 1). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
60°
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed box Luxcassa 1 (not included p.333)/ Ceiling recessing with spring kit (included)
Solo per uso molle
Only for spring fixation
Ø 35 mm44
36
62
4453
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
outdoor / underwateresterni / immersione
116
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0201F300TF
BLUX0201F30WTF
BLUX0201F301TF
BLUX0201F302TF
BLUX0201F303TF
BLUX0201F304TF
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
fascio ottico/beam angle
10°*
10°*
10°*
10°*
10°*
10°*
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
68
68
68
68
68
68
116
applicazioni/applicationsIn immersione e in ambienti con presenza di acqua marina, imbarcazioni e docce. Montaggio in immersione: profondità max 1m. /Underwater, in sea water and boats, showers.Underwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
14000
3500
1550
875
5
10
14
1810°
lux 10 TFtecnopolimero
lux 10 TF techno-polymer
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed box Luxcassa 1 (not included p.333)/ Ceiling recessing with spring kit (included)
Solo per uso molle
Only for spring fixation
Ø 35 mm44
36
62
4453
materiale/material
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
Faretto LED da incasso stagno per esterni.Corpo in tecnopolimero. Dissipatore termico rica-vato da billetta per ottimizzare la dispersione del calore, completo di guarnizioni di tenuta per il fis-saggio. 1 LED da 1,2W 350 mA ad alta resa, con ottica da 10°, con vetro di protezione e pressacavo stagno. Il fissaggio può essere fatto con cassafor-ma in plastica (Luxcassa 1) o tramite le molle sa-gomate in acciaio incluse, in caso di montaggio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 10° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box ( Luxcassa 1). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX02014300TF
BLUX0201430WTF
BLUX02014301TF
BLUX02014302TF
BLUX02014303TF
BLUX02014304TF
colore/colour
cool white
warm white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
fascio ottico/beam angle
25°*
25°*
25°*
25°*
25°*
25°*
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
68
68
68
68
68
68
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
7872
1968
875
492
15
20
28
35
117
applicazioni/applicationsIn immersione e in ambienti con presenza di acqua marina, imbarcazioni e docce. Montaggio in immersione: profondità max 1m. /Underwater, in sea water and boats, showers.Underwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 11 TFtecnopolimero
lux 11 TF techno-polymer
25°
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
accessori/accessoriesCassaforma Luxcassa 1 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed box Luxcassa 1 (not included p.333)/ Ceiling recessing with spring kit (included)
Solo per uso molle
Only for spring fixation
Ø 35 mm44
36
62
4453
materiale/material
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
Faretto LED da incasso stagno per esterni.Corpo in tecnopolimero. Dissipatore termico rica-vato da billetta per ottimizzare la dispersione del calore, completo di guarnizioni di tenuta per il fis-saggio. 1 LED da 1,2W 350 mA ad alta resa, con lente da 25°, con vetro di protezione e pressacavo stagno. Il fissaggio può essere fatto con cassafor-ma in plastica (Luxcassa 1) o tramite le molle sa-gomate in acciaio incluse, in caso di montaggio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 25° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box ( Luxcassa 1). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
outdoor / underwateresterni / immersione
118
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX05013500TF
BLUX0501350WTF
BLUX05013501TF
BLUX05013502TF
BLUX05013503TF
BLUX05013504TF
colore/colour
cool white*
warm white*
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
fascio ottico/beam angle
45°
45°
45°
45°
45°
45°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
cassaforma, kit molle/box, spring kit
accessori/accessories
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
IP/IP
68
68
68
68
68
68
118
applicazioni/applications
In immersione e in ambienti con presenza di acqua marina, imbarcazioni e docce. Montaggio in immersione: profondità max 1m. /Underwater, in sea wather and boats, showers.Underwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
1744
436
194
109
22
44
65
87
Ø26
Ø20,8
45
*Disponibile in versione neutral white su richiesta./ Neutral white on demand.
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
45°
accessori/accessoriesCassaforma Luxcassa 5 (non inclusa p.333)
Recessed installation box Luxcassa 5 (not included p.333)
Solo per uso O-Ring
Only for O-Ring fixation
Ø 21 mm
ø2641
lux 12 TFtecnopolimero
lux 12 TF techno-polymer
Micro faretto LED da incasso stagno per esterni.Corpo in tecnopolimero. Dissipatore termico ri-cavato da billetta per ottimizzare la dispersione del calore, completo di guarnizioni di tenuta per il fissaggio. 1 LED da 1,2W 350 mA ad alta resa, dotato di ottica con lente da 45° e pressacavo stagno. Il fissaggio può essere fatto con cassa-forma in plastica (Luxcassa 5). IP68. NON pedonabile.
Recessed micro LED spotfor outdoor use.Techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA high emission, with 45° beam angle, waterproof cable gland. To fix the spot use plastic box (Luxcassa 5). IP68. DO NOT walk over. IP68 1,2W Ta max 35°C Ta min -20°C1m
max
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
Ø26
Ø20,8
45
*Disponibile in versione neutral white su richiesta./ Neutral white on demand.
prodotto/product
tabella di riepilogo prodotti/ product overview table/
codice/code
BLUX05010500TF
BLUX0501050WTF
BLUX05010501TF
BLUX05010502TF
BLUX05010503TF
BLUX05010504TF
colore/colour
cool white*
warm white*
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
tecnopolimero/techno-polymer
fascio ottico/beam angle
110°
110°
110°
110°
110°
110°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
cassaforma/box
accessori/accessories
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
Luxcassa 5
IP/IP
68
68
68
68
68
68
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
506
126
56
32
50
70
90
110
119
applicazioni/applicationsSegnapasso per esterni, illuminazione d’effetto e d’accento, docce.Montaggio in immersione: profondità max 1m. /Outdoor signalization, light effects, showers.Underwater application: maximal depth 1m.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 12 TF pedonabiletecnopolimero
lux 12 TF walk over techno-polymer
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
accessori/accessoriesCassaforma Luxcassa 5 (non inclusa p.333)
Recessed installation box Luxcassa 5 (not included p.333)
45 ø26
Micro faretto LED da incasso stagno per esterni.Corpo in tecnopolimero. Dissipatore termico ri-cavato da billetta per ottimizzare la dispersione del calore, completo di guarnizioni di tenuta per il fissaggio. 1 LED 1,2W 350mA ad alta resa. Dotato di ottica fissa da 110° e pressacavo stagno in materiale sintetico.Il fissaggio avviene tramite cassaforma in ABS (Luxcassa 5) non in-clusa. IP68. Pedonabile.
Recessed micro LED spotfor outdoor use.Techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with o-ring. 1 LED 1,2W 350mA high emission with 110° optic, waterproof synthetic cable gland. To fix the spot use plastic box (Luxcassa 5) not included. IP68. Walk over.
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Ta max 35°C Ta min -20°C1mmaxIP68 1,2W
110°
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
outdoor / underwateresterni / immersione
120120
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
25°
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX01034300TF
BLUX0103430WTF
colore/colour
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
tecnopolimero/
techno-polymer
tecnopolimero/
techno-polymer
fascio ottico/beam angle
25°*
25°*
ottica/optic
fissa/
fixed
fissa/
fixed
accessori/accessories
Luxcassa 3
Luxcassa 3
IP/IP
68
68
lux 20_25° TFtecnopolimero
lux 20_25° TF techno-polymer
applicazioni/applicationsIn immersione e in ambienti con presenza di acqua marina, imbarcazioni e docce. Montaggio in immersione: profondità max 1m. /Underwater, in sea water and boats, showers.Underwater application: maximal depth 1m.
fissaggio/fixing
cassaforma,
kit molle/
box, spring kit
cassaforma,
kit molle/
box, spring kit
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
accessori/accessoriesCassaforma Luxcassa 3 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed box Luxcassa 3 (not included p.333)/ Ceiling recessing with spring kit (included)
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
5754
Ø57
Ø49
67
Solo per uso molle
Only for spring fixation
Ø 48 mm
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90
Faretto LED da incasso stagnoper esterni.Corpo in tecnopolimero. Dissipatore termico ri-cavato da billetta per ottimizzare la dispersione del calore, completo di guarnizioni di tenuta per il fissaggio. 3 LED da 1,2W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 25°, vetro di protezione e pressacavo stagno. Il fissaggio può essere fatto con cassaforma in plastica (Luxcassa 3) o tramite le molle sagoma-te in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 3 LED 1,2W 350mA high emission, 25° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 3). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
Ta max 35°C Ta min -20°C1mmaxIP68 3x1,2W
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
121
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0103F300TF
BLUX0103F30WTF
colore/colour
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
tecnopolimero/
techno-polymer
tecnopolimero/
techno-polymer
fascio ottico/beam angle
10°*
10°*
ottica/optic
fissa/
fixed
fissa/
fixed
accessori/accessories
Luxcassa 3
Luxcassa 3
IP/IP
68
68
lux 20_10° TFtecnopolimero
lux 20_10° TF techno-polymer
applicazioni/applicationsIn immersione e in ambienti con presenza di acqua marina, imbarcazioni e docce. Montaggio in immersione: profondità max 1m. /Underwater, in sea water and boats, showers.Underwater application: maximal depth 1m.
fissaggio/fixing
cassaforma,
kit molle/
box, spring kit
cassaforma,
kit molle/
box, spring kit
10°
disegni tecnici/technical drawings
illuminamento/illumination bianco freddo/cool white
accessori/accessoriesCassaforma Luxcassa 3 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed box Luxcassa 3 (not included p.333)/ Ceiling recessing with spring kit (included)
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
5754
Ø57
Ø49
67
Solo per uso molle
Only for spring fixation
Ø 48 mm
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
12640
3160
1404
790
20
30
45
65
Faretto LED da incasso stagnoper esterni.Corpo in tecnopolimero. Dissipatore termico ri-cavato da billetta per ottimizzare la dispersione del calore, completo di guarnizioni di tenuta per il fissaggio. 3 LED da 1,2W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 10°, vetro di protezione e pressacavo stagno. Il fissaggio può essere fatto con cassaforma in plastica (Luxcassa 3) o tramite le molle sagoma-te in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti. IP68. Pedonabile.
Recessed LED spot for outdoor use.Techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 3 LED 1,2W 350mA high emission, 10° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 3). To install the spot in false ceiling use the steel fixation spring. IP68. Walk over.
Ta max 35°C Ta min -20°C1mmaxIP68 3x1,2W
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
outdoor / underwateresterni / immersione
122122
disegni tecnici/technical drawings
25°
fascio ottico/beam angle
5754
lux 20_25° RGB TFtecnopolimero
lux 20_25° RGB TF techno-polymer
accessori/accessoriesCassaforma Luxcassa 3 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed installation box Luxcassa 3 (not included p.333)/ Ceiling recessing with spring kit (included)
Faretto LED da incasso stagnoper esterni.Corpo in tecnopolimero. Dissipatore termico ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di guarnizioni di tenu-ta per il fissaggio. 3 LED RGB da 1W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 25°, vetro di protezione e pressa-cavo stagno. Il fissaggio può essere fatto con cassaforma in plastica (Luxcassa 3) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti.La sequenza dinamica del cambio colore può av-venire automaticamente o a comando manuale agendo direttamente sul master o tramite tele-comando. IP68.Pedonabile.Utilizzare alimentazione 12V in immersione.
Recessed LED spot for outdoor use.Techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 3 LED RGB 1W 350mA high emission, 25° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 3). To install the spot in false ceiling use the steel fixation spring. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP68. Walk over.When used in submerged applications, use only a 12V DMX system.
Ø57
Ø49
67
Solo per uso molle
Only for spring fixation
Ø 48 mm
Ta max 35°C Ta min -20°C1mmaxRGBIP68 3x1W
prodotto/product
tabella di riepilogo prodotti/ product overview table
123
applicazioni/applicationsIn immersione e in ambienti con presenza di acqua marina, imbarcazioni e docce. Montaggio in immersione: profondità max 1m. /Underwater, in sea water and boats, showers.Underwater application: maximal depth 1m.
codice/code
BLUX01034306TF
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
tecnopolimero/
techno-polymer
fascio ottico/beam angle
25°*
accessori/accessories
telecomando/
remote control,
Luxcassa 3
IP/IP
68
ottica/optic
fissa/
fixed
fissaggio/fixing
cassaforma/
kit molle/
box/ spring kit
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
In immersione con sistema DMX/ Submerged applications with DMX system
Non in immersione/ Not for submerged applications
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
outdoor / underwater / decorativeesterni / immersione / decorativo
124124
10°
disegni tecnici/technical drawings fascio ottico/beam angle
5754
lux 20_10° RGB TFtecnopolimero
lux 20_10° RGB TF techno-polymer
accessori/accessoriesCassaforma Luxcassa 3 (non inclusa p.333)/ A soffitto tramite kit molle (incluso)
Recessed installation box Luxcassa 3 (not included p.333)/ Ceiling recessing with spring kit (included)
Faretto LED da incasso stagnoper esterni.Corpo in tecnopolimero. Dissipatore termico ricavato da billetta per ottimizzare la dispersio-ne del calore, completo di guarnizioni di tenu-ta per il fissaggio. 3 LED RGB da 1W 350 mA ad alta resa, dotato di lente a tre comparti con fascio ottico 10°, vetro di protezione e pressa-cavo stagno. Il fissaggio può essere fatto con cassaforma in plastica (Luxcassa 3) o tramite le molle sagomate in acciaio incluse, nel caso di montaggio ad esempio su controsoffitti.La sequenza dinamica del cambio colore può av-venire automaticamente o a comando manuale agendo direttamente sul master o tramite tele-comando. IP68.Pedonabile.Utilizzare alimentazione 12V in immersione.
Recessed LED spot for outdoor use.Techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 3 LED RGB 1W 350mA high emission, 10° beam angle, glass protection and waterproof cable gland. To install the spot outdoor in a pedestrian area use the recessed installation box (Luxcassa 3). To install the spot in false ceiling use the steel fixation spring. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP68. Walk over.When used in submerged applications, use only a 12V DMX system.
Ø57
Ø49
67
Solo per uso molle
Only for spring fixation
Ø 48 mm
Ta max 35°C Ta min -20°C1mmaxRGBIP68 3x1W
prodotto/product
tabella di riepilogo prodotti/ product overview table
125
applicazioni/applicationsIn immersione e in ambienti con presenza di acqua marina, imbarcazioni e docce. Montaggio in immersione: profondità max 1m. /Underwater, in sea water and boats, showers.Underwater application: maximal depth 1m.
codice/code
BLUX0103F306TF
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
tecnopolimero/
techno-polymer
fascio ottico/beam angle
10°*
accessori/accessories
telecomando/
remote control,
Luxcassa 3
IP/IP
68
ottica/optic
fissa/
fixed
fissaggio/fixing
cassaforma/
kit molle/
box/ spring kit
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
In immersione con sistema DMX/ Submerged applications with DMX system
Non in immersione/ Not for submerged applications
Disponibile in versione certificata ETL (Stati Uniti / Canada) su richiesta. / ETL (US / Canada) certified version available on demand.
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
outdoor / underwater / decorativeesterni / immersione / decorativo
128
h (m) E (lx) D (cm)
disegni tecnici/technical drawings
illuminamento/illumination
0.25
0.50
0.75
1.00
1518
380
169
95
10
20
30
40
applicazioni/applicationsIlluminazioni di quadri, superfici, possibilità di sagomare il fascio./Paintings, surfaces, shaping light.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
3-5
4-12
4-12
8
/
*Esempio schemi di collegamento a p.345/ Example of wiring diagram on p.345
alimentatori/LED drivers
WALIMLED 01700
WALIMLED 03700
WALIMLED 05700
WALIMLED 12700
WALIMLED 12700D
WALIM/DIMM/JOLLY
WBOKVAR
3W - 700mA - 32x50x18 (h)
10W - 700mA - 115x34x20 (h)
18W - 700mA - 160x45x32 (h)
36W - 700mA - 132x40x30 (h)
36W - 700mA - 132x40x30 (h) - dimm.
25W - 700mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
tabella di riepilogo prodotti/ product overview table
lux 14alluminio anodizzato
lux 14 anodized aluminum
Faretto LED sagomatore per interni.Corpo in alluminio anodizzato, ottica con focale re-golabile. Il movimento dell’ottica anteriore consente una perfetta messa a fuoco, il fissaggio avviene tra-mite un grano a brugola. 1 LED 2,5W 700mA ad altissima resa posizionato nella parte posteriore su una basetta in allumino pieno per la corretta dissipa-zione del calore, completo di lente convessa e pres-sacavo trasparente. Lo snodo di fissaggio in allumi-nio e metallo cromato consente di fissare il faretto e di orientarlo. Il fascio di luce è sagomabile grazie a lamelle di acciaio che, se rimosse, danno un effetto luce rotondo. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Framing projector LED for interior use.Anodized aluminum body, optic with adjustable focusing. The movement of the front optic allows a perfect focusing. 1 LED 2,5W 700mA high emission located in the back on a aluminum base for a perfect heat dissipation, complete with convex lens and pull relief. The aluminum and chromed fixing joint, allows to fix the spot and adjust it. The beam of light is shaped thanks to the stainless steel thin plates, if removed the light will have a round shape. Excellent Colour Rendering Index (warm white = CRI >90).
64,5 134
90 78
30
prodotto/product
codice/code
BLUX10010300AA
BLUX1001030WAA
colore/colour
cool white*
warm white*
tipo/type
interni/ interior
interni/ interior
LED/LED
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
ottica sagomata/
shaped optic
ottica sagomata/
shaped optic
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
IP/IP
40
40
fissaggio/fixing
con snodo/
with joint
con snodo/
with joint
bianco freddo/cool white
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
Ta max 35°CIP40 2,5W
129
interiorinterni
disegni tecnici/technical drawings
illuminamento/illumination
applicazioni/applicationsIlluminazioni di quadri, superfici con cono di luce rotonda.Possibilità di proiettare scritte e loghi./Paintings light with round light cone. Possibility to put in inscriptions or logos.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
3-5
4-12
4-12
8
/
*Esempio schemi di collegamento a p.345/ Example of wiring diagram on p.345
alimentatori/LED drivers
WALIMLED 01700
WALIMLED 03700
WALIMLED 05700
WALIMLED 12700
WALIMLED 12700D
WALIM/DIMM/JOLLY
WBOKVAR
3W - 700mA - 32x50x18 (h)
10W - 700mA - 115x34x20 (h)
18W - 700mA - 160x45x32 (h)
36W - 700mA - 132x40x30 (h)
36W - 700mA - 132x40x30 (h) - dimm.
25W - 700mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
tabella di riepilogo prodotti/ product overview table
lux 21alluminio anodizzato
lux 21 anodized aluminum
Faretto LED sagomatore ad incassoper interni.Corpo in alluminio anodizzato, ottica con focale regolabile +/- 15°. Cono di luce di forma rotonda. All’interno può portare un diaframma o una gelatina sagomati con scritte o loghi. Il movimento dell’ottica anteriore consente una perfetta messa a fuoco, il fissaggio avviene tramite un grano a brugola. 1 LED 2,5W 700mA ad altissima resa posizionato nella parte posterione su una basetta in allumino pieno per la corretta dissipazione del calore, completo di pressacavo trasparente. IP40. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Recessed framing projector LEDfor interior use.Anodized aluminum body, optic with adjustable focusing +/- 15°. Round light cone. Use of inner framing/gelatine shaped with inscriptions or logos.The movement of the front optic allows a perfect focusing. 1 LED 2,5W 700mA high emission located in the back on a aluminum base for a perfect heat dissipation, complete with clear pull relief. IP40. Excellent Colour Rendering Index (warm white = CRI >90).
codice/code
BLUX15010300AA
BLUX1501030WAA
colore/colour
cool white*
warm white*
tipo/type
interni/ interior
interni/ interior
LED/LED
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
ottica sagomata/
shaped optic
ottica sagomata/
shaped optic
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
IP/IP
40
40
fissaggio/fixing
con molle/
with spring
con molle/
with spring
0.25
0.50
0.75
1.00
1518
380
169
95
10
20
30
40
h (m) E (lx) D (cm)120
40 50
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
15°+-
IP40 2,5W
bianco freddo/cool white
Ta max 35°C
Solo per uso molle
Only for spring fixation
Ø 44mm
montaggio/installationA soffitto tramite molle (incluso)
Ceiling recessing with spring (included)
130
disegni tecnici/technical drawings
illuminamento/illumination
applicazioni/applicationsIlluminazioni di quadri, superfici, oggetti preziosi e vetrine./Paintings, surfaces, precious objects and show-cases lighting
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
3-5
4-12
4-12
8
/
*Esempio schemi di collegamento a p.345/ Example of wiring diagram on p.345
alimentatori/LED drivers
WALIMLED 01700
WALIMLED 03700
WALIMLED 05700
WALIMLED 12700
WALIMLED 12700D
WALIM/DIMM/JOLLY
WBOKVAR
3W - 700mA - 32x50x18 (h)
10W - 700mA - 115x34x20 (h)
18W - 700mA - 160x45x32 (h)
36W - 700mA - 132x40x30 (h)
36W - 700mA - 132x40x30 (h) - dimm.
25W - 700mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
tabella di riepilogo prodotti/ product overview table
lux 16alluminio anodizzato
lux 16 anodized aluminum
Faretto LED per interni di ridotte dimensioni.Corpo in alluminio anodizzato ricavato da billet-ta piena per ottimizzare la dissipazione del ca-lore. 1 LED 2,5W 700mA ad altissima resa con ottica I.R.L. completa di lente da 60° e ghiera di chiusura a vite. Snodo incorporato in alluminio e metallo cromato che consente di fissare il fa-retto e di orientarlo. Nessun cavo è visibile all’e-sterno in quanto il passaggio dell’alimentazione avviene attraverso lo snodo. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
LED spot of small dimensionsfor interior use.Anodized aluminum body, machined from a solid rod to optimize heat dissipation. 1 LED 2,5W 700mA high emission, I.R.L. 60° beam angle, complete with lens and screw lock nut. Aluminum and chromed fixing joint included that allows to adjust and fix the orientation. No visible cable, because the wiring runs through the joint. Excellent Colour Rendering Index (warm white = CRI >90).
codice/code
BLUX04010300AA
BLUX0401030WAA
colore/colour
cool white*
warm white*
tipo/type
interni/ interior
interni/ interior
LED/LED
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
60°
60°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
IP/IP
40
40
fissaggio/fixing
con snodo/
with joint
con snodo/
with joint
43
60,5
30
0.25
0.50
0.75
1.00
1266
316
141
79
33
65
98
130
h (m) E (lx) D (cm)
60°
Ta max 35°CIP40 2,5W
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
bianco freddo/cool white
131
disegni tecnici/technical drawings
illuminamento/illumination
applicazioni/applications
Illuminazioni di quadri, superfici, oggetti preziosi e vetrine./Paintings, surfaces, precious objects and show-cases lighting
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
3-5
4-12
4-12
8
/
*Esempio schemi di collegamento a p.345/ Example of wiring diagram on p.345
alimentatori/LED drivers
WALIMLED 01700
WALIMLED 03700
WALIMLED 05700
WALIMLED 12700
WALIMLED 12700D
WALIM/DIMM/JOLLY
WBOKVAR
3W - 700mA - 32x50x18 (h)
10W - 700mA - 115x34x20 (h)
18W - 700mA - 160x45x32 (h)
36W - 700mA - 132x40x30 (h)
36W - 700mA - 132x40x30 (h) - dimm.
25W - 700mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
tabella di riepilogo prodotti/ product overview table
lux 30alluminio anodizzato
lux 30 anodized aluminum
Micro faretto LED per internidi ridottissime dimensioni.Corpo in alluminio anodizzato ricavato da billetta piena per ottimizzare la dissipazione del calore.1 LED 2,5W 700mA ad altissima resa con ottica I.R.L. completa di lente da 60° e ghiera di chiusura a vite. Staffa in acciaio inox cromato satinato che consente di fissare il faretto e di orientarlo. IP40. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
LED spot of small dimensionsfor interior use.Anodized aluminum body, machined from a solid rod to optimize heat dissipation. 1 LED 2,5W 700mA high emission, I.R.L. 60° optic beam. Sanded chromed stainless steel bracket to adjust and fix it. IP40. Excellent Colour Rendering Index (warm white = CRI >90).
prodotto/product
codice/code
BLUXS4016300AA
BLUXS401630WAA
colore/colour
cool white*
warm white*
tipo/type
interni/ interior
interni/ interior
LED/LED
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
60°
60°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
IP/IP
40
40
fissaggio/fixing
con staffa/
with bracket
con staffa/
with bracket
0.25
0.50
0.75
1.00
1266
316
141
79
33
65
98
130
h (m) E (lx) D (cm)
60°
44
35 32
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
Ta max 35°CIP40 2,5W
bianco freddo/cool white
interiorinterni
132132
disegni tecnici/technical drawings
illuminamento/illumination
applicazioni/applications
Illuminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
tabella di riepilogo prodotti/ product overview table
lux 27_25°alluminio anodizzato
lux 27_25° anodized aluminum
Faretto LED per interni.Corpo in alluminio anodizzato ricavato da billetta piena per ottimizzare la dissipazione del calore. 3 LED da 1,2W 350mA ad alta resa, ottica con lente a tre comparti con fascio ottico 25°, vetro di protezione e ghiera di chiusura a vite. Snodo incorporato in alluminio e metallo cromato che consente di fissare il faretto e di orientarlo. Nes-sun cavo è visibile all’esterno in quanto il pas-saggio dell’alimentazione avviene attraverso lo snodo. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
LED spot for interior use.Anodized aluminum body, machined from a solid rod to optimize heat dissipation. 3 LED 1,2W 350mA high emission, 25° beam angle, glass of protection and screw lock nut. Aluminum and chromed fixing joint included that allows to adjust and fix the orientation. No visible cable, because the wiring runs through the joint. Excellent Colour Rendering Index (warm white = CRI >90).
prodotto/product
codice/code
BLUX04034300AA
BLUX0403430WAA
colore/colour
cool white*
warm white*
tipo/type
interni/ interior
interni/ interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
25°*
25°*
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
IP/IP
40
40
fissaggio/fixing
con snodo/
with joint
con snodo/
with joint
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90
h (m) E (lx) D (cm)
25°
60 60
30
70
Ta max 35°CIP40 3x1,2W
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
bianco freddo/cool white
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
133
applicazioni/applications
Illuminazione di scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
disegni tecnici/technical drawings
illuminamento/illumination
tabella di riepilogo prodotti/ product overview table
lux 27_10°alluminio anodizzato
lux 27_10° anodized aluminum
Faretto LED per interni.Corpo in alluminio anodizzato ricavato da billetta piena per ottimizzare la dissipazione del calore. 3 LED da 1,2W 350mA ad alta resa, ottica con lente a tre comparti con fascio ottico 10°, vetro di protezione e ghiera di chiusura a vite. Snodo incorporato in alluminio e metallo cromato che consente di fissare il faretto e di orientarlo. Nes-sun cavo è visibile all’esterno in quanto il pas-saggio dell’alimentazione avviene attraverso lo snodo. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
LED spot for interior use.Anodized aluminum body, machined from a solid rod to optimize heat dissipation. 3 LED 1,2W 350mA high emission, 10° beam angle, glass of protection and screw lock nut. Aluminum and chromed fixing joint included that allows to adjust and fix the orientation. No visible cable, because the wiring runs through the joint. Excellent Colour Rendering Index (warm white = CRI >90).
prodotto/product
codice/code
BLUX0403F300AA
BLUX0403F30WAA
colore/colour
cool white*
warm white*
tipo/type
interni/ interior
interni/ interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
10°*
10°*
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
IP/IP
40
40
fissaggio/fixing
con snodo/
with joint
con snodo/
with joint
0.50
1.00
1.50
2.00
12640
3160
1404
790
20
30
45
65
h (m) E (lx) D (cm)60 60
30
70
10°
Ta max 35°CIP40 3x1,2W
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
bianco freddo/cool white
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
interiorinterni
134134
disegni tecnici/technical drawings fascio ottico/beam angle
25°
lux 27_25° RGBalluminio anodizzato
lux 27_25° RGB anodized aluminum
Faretto LED per interni.Corpo in alluminio anodizzato ricavato da bil-letta piena per ottimizzare la dissipazione del calore. 3 LED RGB da 1W 350mA ad alta resa, ottica con lente a tre comparti con fascio ottico 25°, vetro di protezione e ghiera di chiusura a vite. Snodo incorporato in alluminio e metallo cromato che consente di fissare il faretto e di orientarlo. Nessun cavo è visibile all’esterno in quanto il passaggio dell’alimentazione avviene attraverso lo snodo. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando manuale agendo direttamente sul master o tramite telecomando.
LED spot for interior use.Anodized aluminum body, machined from a solid rod to optimize heat dissipation. 3 LED RGB 1W 350mA high emission, 25° beam angle, glass of protection and screw lock nut. Aluminum and chromed finish fixing joint included that allows to adjust and fix the orientation. No visible cable, because the wiring runs through the joint. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.
60 60
30
70
Ta max 35°CIP40 3x1W RGB
135
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX04034306AA
colore/colour
RGB
tipo/type
interni/
interior
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
fascio ottico/beam angle
25°*
ottica/optic
orientabile/
adjustable
fissaggio/fixing
con snodo/
with joint
accessori/accessories
telecomando/
remote control
IP/IP
40
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
applicazioni/applicationsIlluminazione decorativa e di accento per scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
interior / decorativeinterni / decorativo
136136
disegni tecnici/technical drawings
lux 27_10° RGBalluminio anodizzato
lux 27_10° RGB anodized aluminum
60 60
30
70 10°
fascio ottico/beam angle
Faretto LED per interni.Corpo in alluminio anodizzato ricavato da bil-letta piena per ottimizzare la dissipazione del calore. 3 LED RGB da 1W 350mA ad alta resa, ottica con lente a tre comparti con fascio ottico 10°, vetro di protezione e ghiera di chiusura a vite. Snodo incorporato in alluminio e metallo cromato che consente di fissare il faretto e di orientarlo. Nessun cavo è visibile all’esterno in quanto il passaggio dell’alimentazione avviene attraverso lo snodo. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando manuale agendo direttamente sul master o tramite telecomando.
LED spot for interior use.Anodized aluminum body, machined from a solid rod to optimize heat dissipation. 3 LED RGB 1W 350mA high emission, 10° beam angle, glass of protection and screw lock nut. Aluminum and chromed finish fixing joint included that allows to adjust and fix the orientation. No visible cable, because the wiring runs through the joint. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.
Ta max 35°CIP40 3x1W RGB
137
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0403F306AA
colore/colour
RGB
tipo/type
interni/
interior
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
fascio ottico/beam angle
10°*
ottica/optic
orientabile/
adjustable
fissaggio/fixing
con snodo/
with joint
accessori/accessories
telecomando/
remote control
IP/IP
40
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
applicazioni/applicationsIlluminazione decorativa e di accento per scaffali, mensole, vetrine./Decorative lighting, accent lighting, shelves and showcases lighting.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
interior / decorativeinterni / decorativo
138138
lux 33alluminio anodizzato
lux 33 anodized aluminum
Proiettore orientabile a LED per esterni.Corpo in alluminio anodizzato ricavato dal pieno per ottimizzare la dissipazione del calore, guar-nizioni di tenuta per la protezione contro infiltra-zioni di polvere e di acqua, e pressacavo stagno in metallo. Proiettore con 6 LED 3W 700mA, driver integrato. Il driver è in grado di stabilizzare la caduta di tensione in caso di cavi lunghi ap-plicando alimentazione a 24V DC. Ottica con 6 lenti con fascio ottico 10°/25°/40° fissate su cir-cuito elettronico, vetro di protezione e ghiera di chiusura in alluminio. Staffa in acciaio inox con forature per fissare il faretto e orientarlo. Il faretto può essere fissato anche utilizzando il picchetto per il posizionamento nel terreno. IP68. Potenza assorbita: 22W. Utilizzare alimentazione 12V in immer-sione. Collegamento in parallelo.BREVETTATO.
Recessed LED projectorfor outdoor use.Body in anodized aluminum machined from a solid rod to optimize heat dissipation, gasket for protection against dust and water ingress, cable gland in metal. The projector is equipped with 6 LED 3W 700mA high emission, internal low voltage converter to constant current. The converter is able to compensate the loss in line voltage using 24V DC drivers. Optic with 6 lenses 10°/25°/40° beam fixed on electronic circuit, protective glass and threaded ring in aluminum. Stainless steel drilled brackets in order to fix and adjust the spot. The spot can be also fixed using peg for the ground. IP68. Power consumption: 22W.To use 12V feeding for submerged applications. Parallel connection.PATENTED.
disegni tecnici/technical drawings
accessori/accessoriesPicchetto (non incluso p.335)
Peg (not included p.335)
108
149
33115
115
IP68 Ta max 35°C Ta min -20°C1mmax
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
6600
1650
730
410
/
/
/
/
0.50
1.00
1.50
2.00
33200
8300
3680
270
/
/
/
/
0.50
1.00
1.50
2.00
13200
3300
1450
820
/
/
/
/10° 25° 40°
bianco freddo/cool white
6LED 22W
139
applicazioni/applicationsIlluminazione di monumenti,viali, segnapassi, facciate, piscine, fontane.Montaggio in immersione: profondità max 1m./Monuments lighting, paths and front lighting, swimming pool, fountains. Underwater application: maximal depth 1m.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0906F300AA
BLUX0906F30WAA
BLUX09064300AA
BLUX0906430WAA
BLUX09067300AA
BLUX0906730WAA
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
06
06
06
06
06
06
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
accessori/accessories
picchetto/
peg
picchetto/
peg
picchetto/
peg
picchetto/
peg
picchetto/
peg
picchetto/
peg
IP/IP
68
68
68
68
68
68
*Esempio schemi di collegamento a pag.346 / Example of wiring diagram on p.346
*codice/codenon inclusi/not included
*codice/codenon inclusi/not included
n. faretti/n. spots
n. faretti/n. spots
caratteristiche/specifications
caratteristiche/specifications
1
2
4
10
1
2
4
10
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
Per utilizzo in immersione/ For water immersion
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
outdoor / underwateresterni / immersione
140140
disegni tecnici/technical drawings
lux 33 RGBalluminio anodizzato
lux 33 RGB anodized aluminum
Proiettore da incasso a LED per esterni. Corpo in alluminio anodizzato ricavato dal pie-no per ottimizzare la dissipazione del calore, guarnizioni di tenuta per la protezione contro infiltrazioni di polvere e di acqua, e pressacavo stagno in metallo. Il proiettore è equipaggiato con 6 LED RGB ad alta emissione. Ottica con 6 lenti con fascio ottico 10°/25°/40° fissate su cir-cuito elettronico, vetro di protezione e ghiera di chiusura in alluminio. Staffa in acciaio inox con forature per fissare il faretto e orientarlo. Il faretto può essere fissato anche utilizzando il picchetto per il posizionamento nel terreno. La sequenza dinamica del cambio colore può avvenire au-tomaticamente o a comando manuale agendo direttamente sul master o tramite telecomando. IP68. Potenza assorbita: 18W circa.Utilizzare sistema DMX con alimenta-zione 12V in immersione.BREVETTATO.
Recessed LED projectorfor outdoor use. Body in anodized aluminum machined from a solid rod to optimize heat dissipation, gasket for protection against dust and water ingress, cable gland in metal. The projector is equipped with 6 LED RGB high emission. Optic with 6 lenses 10°/25°/40° beam fixed on electronic circuit, protective glass and threaded ring in aluminum. Stainless steel drilled brackets in order to fix and adjust the spot. The spot can be also fixed using peg for the ground. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP68. Power consumption: approximately 18W.When used in submerged applications, use only a 12V DMX system.PATENTED.
108
149
33115
115
accessori/accessoriesPicchetto (non incluso p.335)
Peg (not included p.335)
fascio ottico/beam angle
10° 25° 40°
IP68 6LED RGB Ta max 35°C Ta min -20°C1mmax18W
141
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BLUX0906F306AA
BLUX09064306AA
BLUX09067306AA
colore/colour
RGB
RGB
RGB
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
06
06
06
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
fascio ottico/beam angle
10°
25°
40°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
accessori/accessories
picchetto/
peg
picchetto/
peg
picchetto/
peg
IP/IP
68
68
68
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
*Esempio schemi di collegamento a p.356/ Example of wiring diagram on p.356
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
In immersione con sistema DMX/ Submerged applications with DMX system
codice/code non inclusi/not included
Slave DMX
Controller
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
caratteristiche/specifications
n. faretti/n. spots
WSLAVEDMX6X3R
WTELEC-RGB
Slave DMX (24V /12V)
Telecomando / Remote control
3 (24V) /1 (12V)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB-DMX/controller RGB-DMX
!
Master DMX
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
/
/
/
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
Cavi/ Cables
QDMX512/CABLE-A
QDMX512/CABLE-B
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
applicazioni/applicationsIlluminazione di monumenti,viali, segnapassi, facciate, piscine, fontane.Montaggio in immersione: profondità max 1m./Monuments lighting, paths and front lighting, swimming pool, fountains. Underwater application: maximal depth 1m.
outdoor / underwater / decorativeesterni / immersione / decorativo
142
S.M.A. staffaalluminio
S.M.A. bracket aluminum
Faretto a LED orientabile con staffa per interni.Corpo in alluminio verniciato ricavato da una fusio-ne in gravità. Proiettore equipaggiato con 9 LED 3W 700mA (27W tot.) ad alta resa. Driver integra-to per stabilizzare la caduta di tensione in caso di cavi lunghi applicando alimentazione a 24V DC. Ottica con 9 lenti con fascio ottico 10°/25°/40° fissate su circuito elettronico. Staffa in acciao inox con forature per fissare il faretto ed orientarlo. IP40. Verniciato in bianco, nero o grigio. Possibilità di abbinare alla staffa un adattatore per binario 24V. Eccellente Indice di Resa Cromatica (warm white = CRI >90).Collegamento in parallelo.BREVETTATO.
Adjustable LED spot with bracketfor interior use.Varnished die-casted aluminum body. Projector with 9 LED 3W 700mA (tot. 27W) high emission, internal low voltage converter to constant current. The converter is able to compensate the loss in line voltage using 24V DC drivers. Optic with 9 lenses with 10°/25°/40° beam angle. Stainless steel drilled bracket in order to fix and adjust the spot. IP40. White, black or grey varnish. Possibility to use with 24V rail adapter kit. Excellent Colour Rendering Index (warm white = CRI >90).Parallel connection.PATENTED.
disegni tecnici/technical drawings
78146
ø124,5
Ta max 35°CIP40 9x3W
finitura biancowhite finishing
finitura neroblack finishing
finitura grigiogrey finishing
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
10400
2600
1150
650
/
/
/
/
0.50
1.00
1.50
2.00
37200
9300
4100
2300
/
/
/
/
0.50
1.00
1.50
2.00
14400
3600
1600
900
/
/
/
/10° 25° 40°
bianco freddo/cool white
accessori/accessoriesAdattatore 24V DC per binario/Adattatore 220V DC per binario (non inclusi p.318)
Adapter 24V DC for track/Adapter 220V DC for track (not included p.318)
track systemcompatible
143
applicazioni/applicationsIlluminazione generale di ambienti, negozi, quadri, mostre, scaffali./Hospitality lighting, general lighting, decorative lighting, pictures, exhibition, shelves.
prodotto/product
codice/code
MSMAS409F300GM
MSMAS409F30WGM
MSMAS4094300GM
MSMAS409430WGM
MSMAS4097300GM
MSMAS409730WGM
MSMAS409F300NE
MSMAS409F30WNE
MSMAS4094300NE
MSMAS409430WNE
MSMAS4097300NE
MSMAS409730WNE
MSMAS409F300BO
MSMAS409F30WBO
MSMAS4094300BO
MSMAS409430WBO
MSMAS4097300BO
MSMAS409730WBO
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
09
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
finitura/finishing
grigio/grey
grigio/grey
grigio/grey
grigio/grey
grigio/grey
grigio/grey
nero/black
nero/black
nero/black
nero/black
nero/black
nero/black
bianco/white
bianco/white
bianco/white
bianco/white
bianco/white
bianco/white
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
tabella di riepilogo prodotti/ product overview table
*codice/codenon inclusi/not included
*codice/codenon inclusi/not included
n. faretti/n. spots
n. faretti/n. spots
caratteristiche/specifications
caratteristiche/specifications
1
2
3
8
2
3
8
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
interiorinterni
144144
disegni tecnici/technical drawings
Proiettore orientabile a LED per esterni. Corpo in alluminio anodizzato ricavato dal pieno per ottimizzare la dissipazione del calore, guarni-zioni di tenuta per la protezione contro infiltrazio-ni di polvere e di acqua e pressacavo in metallo. Staffa in acciaio inox con forature per fissare il fa-retto e orientarlo. Il proiettore è equipaggiato con 18 LED 420mA ad alta resa con driver integrato. Ottica con 6 lenti minitrittiche con fascio ottico 10°/25°/40° fissate su circuito elettronico, vetro di protezione e ghiera di chiusura in alluminio. IP65/67. Potenza assorbita: 30W circa.NON in immersione.Collegamento in parallelo.BREVETTATO.
LED projector with bracketfor outdoor use. Body in anodized aluminum machined from a solid rod to optimize heat dissipation, gasket for protection against dust and water ingress, cable gland in metal. Steel bracket with holes to fix and adjust the spot. The projector is equipped with 18 LED 420mA high efficiency, internal low voltage converter to constant current. Fixed optic with 6 triple lenses. Beam angle 10°/25°/40°, protective glass and threated ring in aluminum. IP65/67. Power consumption: approximately 30W.Do not use for water immersion.Parallel connection.PATENTED.
108
149
33115
115
lux 33Ralluminio anodizzato
lux 33R anodized aluminum
accessori/accessoriesPicchetto (non incluso p.335)
Peg (not included p.335)
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
13400
3350
1480
830
/
/
/
/
0.50
1.00
1.50
2.00
49400
12350
5450
3080
/
/
/
/
0.50
1.00
1.50
2.00
29600
7400
3250
1850
/
/
/
/10° 25° 40°
bianco freddo/cool white
Ta max 35°C18LED 30W Ta min -20°CIP65/67
145
*Esempio schemi di collegamento a p.346
Example of wiring diagram on p.346
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
7
alimentatori/LED drivers
WALIM40W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
applicazioni/applicationsIlluminazione di monumenti,viali, segnapassi, facciate./Monuments lighting, paths and front lighting.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0918F500AA
BLUX0918F50WAA
BLUX09184500AA
BLUX0918450WAA
BLUX09187500AA
BLUX0918750WAA
colore/colour
cool white*
warm white*
cool white*
warm white*
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
18
18
18
18
18
18
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
accessori/accessories
picchetto/
peg
picchetto/
peg
picchetto/
peg
picchetto/
peg
picchetto/
peg
picchetto/
peg
IP/IP
65/67
65/67
65/67
65/67
65/67
65/67
*Disponibile in versione neutral white o con LED a luce colorata su richiesta. / Neutral white or coloured LED on demand.
outdooresterni
146146
lux 33R RGBalluminio anodizzato
lux 33R RGB anodized aluminum
disegni tecnici/technical drawings
Proiettore orientabile a LED per esterni.Corpo in alluminio anodizzato ricavato dal pie-no per ottimizzare la dissipazione del calore, guarnizioni di tenuta per la protezione contro infiltrazioni di polvere e di acqua e pressacavo in metallo. Staffa in acciaio inox con forature per fissare il faretto e orientarlo. Il proiettore è equi-paggiato con 18 LED RGB ad alta resa senza driver (utilizzare SLAVE DMX). Ottica fissa con 6 lenti minitrittiche con fascio ottico 10°/25°/40° fissate su circuito elettronico, vetro di protezio-ne e ghiera di chiusura in alluminio. La sequenza dinamica del cambio colore può avvenire auto-maticamente o a comando manuale agendo direttamente sul master o tramite telecomando. IP65/67. Potenza assorbita: 25W circa.Non in immersione.BREVETTATO.
LED projector with bracketfor outdoor use. Body in anodized aluminum machined from a solid rod to optimize heat dissipation, gasket for protection against dust and water ingress, cable gland in metal. Steel bracket with holes to fix and adjust the spot. The projector is equipped with 18 LED RGB high efficiency, whitout driver (to use SLAVE DMX). Fixed optic with 6 triple lenses. Beam angle 10°/25°/40°, protective glass and threated ring in aluminum. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP65/67. Power consumption: approximately 25W.Do not use for water immersion.PATENTED.
108
149
33115
115
accessori/accessoriesPicchetto (non incluso p.335)
Peg (not included p.335)
fascio ottico/beam angle
10° 25° 40°
Ta max 35°CRGB18LED 25W Ta min -20°CIP65/67
147
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BLUX0918F506AA
BLUX09184506AA
BLUX09187506AA
colore/colour
RGB
RGB
RGB
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
18
18
18
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio /
aluminum
alluminio /
aluminum
alluminio /
aluminum
fascio ottico/beam angle
10°
25°
40°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
accessori/accessories
picchetto/ telecomando
peg/ remote control
picchetto/ telecomando
peg/ remote control
picchetto/ telecomando
peg/ remote control
IP/IP
65/67
65/67
65/67
applicazioni/applicationsIlluminazione di monumenti,viali, segnapassi, facciate./Monuments lighting, paths and front lighting.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
9
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
*Esempio schemi di collegamento a p.356
Example of wiring diagram on p.356
codice/code non inclusi/not included
Slave DMX
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
caratteristiche/specifications
n. faretti/n. spots
WSLAVEDMX6X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
Slave DMX
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
1
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB-DMX/controller RGB-DMX
!
Master DMX
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
/
/
/
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
outdoor / decorativeesterni / decorativo
148
S.M.A.R. staffaalluminio
S.M.A.R. bracket aluminum
Faretto a LED orientabile con staffaper interni.Corpo in alluminio verniciato ricavato da una fu-sione in gravità. Proiettore equipaggiato con 18 LED 420mA ad alta resa, driver integrato. Driver per stabilizzare la caduta di tensione in caso di cavi lunghi applicando alimentazione a 24V DC. Ottica con 6 lenti minitrittiche con fascio ottico 10°/25°/40° fissate su circuito elettronico e possibilità di applicare filtri colorati. Potenza assorbita: 30W circa. Staffa in acciaio inox con forature per fissare il faretto ed orientarlo. IP40. Verniciato in bianco, nero o grigio. Possibilità di abbinare alla staffa un adattatore per binario 24V. Collegamento in parallelo.BREVETTATO.
Adjustable LED spot with bracketfor interior use.Varnished die-casted aluminum body. Projector with 18 LED 420mA high emission, internal low voltage converter to constant current. The converter is able to compensate the loss in line voltage using 24V DC drivers. Optic with 6 triple lenses with 10°/25°/40° beam angle. Stainless steel drilled bracket in order to fix and adjust the spot. Power consumption: approximately 30W. IP40. White, black or grey varnish. Possibility to use with 24V rail adapter kit.Parallel connection.PATENTED.
disegni tecnici/technical drawings
Ta max 35°CIP40 30W18LED
finitura biancowhite finishing
finitura neroblack finishing
finitura grigiogrey finishing
illuminamento/illumination
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
0.50
1.00
1.50
2.00
13400
3350
1480
830
/
/
/
/
0.50
1.00
1.50
2.00
49400
12350
5450
3080
/
/
/
/
0.50
1.00
1.50
2.00
29600
7400
3250
1850
/
/
/
/10° 25° 40°
bianco freddo/cool white
accessori/accessoriesAdattatore 24V DC per binario/Adattatore 220V DC per binario (non inclusi p.318)
Adapter 24V DC for track/Adapter 220V DC for track (not included p.318)
78146
ø124,5
track systemcompatible
149
applicazioni/applicationsIlluminazione generale di ambienti, negozi, quadri, mostre, scaffali./Hospitality lighting, general lighting, decorative lighting, pictures, exhibition, shelves.
interiorinterni
prodotto/product
codice/code
MSMAS418F500GM
MSMAS418F50WGM
MSMAS4184500GM
MSMAS418450WGM
MSMAS4187500GM
MSMAS418750WGM
MSMAS418F500NE
MSMAS418F50WNE
MSMAS4184500NE
MSMAS418450WNE
MSMAS4187500NE
MSMAS418750WNE
MSMAS418F500BO
MSMAS418F50WBO
MSMAS4184500BO
MSMAS418450WBO
MSMAS4187500BO
MSMAS418750WBO
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
finitura/finishing
grigio/grey
grigio/grey
grigio/grey
grigio/grey
grigio/grey
grigio/grey
nero/black
nero/black
nero/black
nero/black
nero/black
nero/black
bianco/white
bianco/white
bianco/white
bianco/white
bianco/white
bianco/white
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
tabella di riepilogo prodotti/ product overview table
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
7
alimentatori/LED drivers
WALIM40W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
*Esempio schemi di collegamento a p.346
Example of wiring diagram on p.346
150
S.M.A.R RGB staffaalluminio
S.M.A.R RGB bracket aluminum
Faretto a LED orientabile con staffaper interni.Corpo in alluminio verniciato ricavato da una fusione in gravità. Proiettore equipaggiato con 18 LED RGB ad alta resa, senza driver (utilizza-re SLAVE DMX). Ottica con 6 lenti minitrittiche con fascio ottico 10°/25°/40° fissate su circuito elettronico e possibilità di applicare filtri colorati. Potenza assorbita: 25W circa. Staffa in acciaio inox con forature per fissare il faretto e orientar-lo. La sequenza del cambio colore può avve-nire automaticamente o a comando manuale, agendo direttamente sul Master o tramite il tele-comando (optional). IP40. Verniciato in bianco, nero o grigio.BREVETTATO.
Adjustable LED spot with bracketfor interior use.Varnished die-casted aluminum body. Projector with 18 LED RGB high emission, without driver (to use SLAVE DMX). Fixed optic with 6 triple lenses with 10°/25°/40° beam angle. Stainless steel drilled bracket in order to fix and adjust the spot. Power consumption: approximately 25W. IP40. White, black or grey varnish. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.PATENTED.
disegni tecnici/technical drawings fascio ottico/beam angle
10° 25° 40°
78
146
ø124,5
Ta max 35°CRGBIP40 25W18LED
finitura biancowhite finishing
finitura neroblack finishing
finitura grigiogrey finishing
151
tabella di riepilogo prodotti/ product overview table
interior / decorativeinterni / decorativo
prodotto/product
codice/code
MSMAS418F506GM
MSMAS4184506GM
MSMAS4187506GM
MSMAS418F506NE
MSMAS4184506NE
MSMAS4187506NE
MSMAS418F506BO
MSMAS4184506BO
MSMAS4187506BO
colore/colour
RGB
RGB
RGB
RGB
RGB
RGB
RGB
RGB
RGB
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
18
18
18
18
18
18
18
18
18
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
10°
25°
40°
10°
25°
40°
10°
25°
40°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
con staffa/with bracket
finitura/finishing
grigio/grey
grigio/grey
grigio/grey
nero/black
nero/black
nero/black
bianco/white
bianco/white
bianco/white
IP/IP
40
40
40
40
40
40
40
40
40
applicazioni/applicationsIlluminazione generale di ambienti, locali pubblici./General lighting, accent lighting, decorative ligh-ting, public places.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
9
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
*Esempio schemi di collegamento a p.356
Example of wiring diagram on p.356
codice/code non inclusi/not included
Slave DMX
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
caratteristiche/specifications
n. faretti/n. spots
WSLAVEDMX6X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
Slave DMX
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
1
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB-DMX/controller RGB-DMX
!
Master DMX
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
/
/
/
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
152
lux 13acciaio inox
lux 13 stainless steel
Faretto LED per esterni.Corpo in acciaio inox AISI 303 finitura satinata ricavato dal pieno per ottimizzare la dissipazio-ne del calore, guarnizioni di tenuta per la prote-zione contro infiltrazioni di polvere e di acqua, e pressacavo stagno in metallo. 1 LED da 2,5W 700mA ad altissima resa, con ottica I.R.L. com-pleta di lente da 60° e ghiera di chiusura a vite. Staffa in acciaio inox AISI 304 con forature per fissare il faretto e orientarlo. Il faretto può essere fissato anche utilizzando gli accessori, attacco parete/plafone (per una manutenzione più age-vole) e picchetto per il posizionamento nel ter-reno. IP68.
LED spot for interior use.Sanded stainless steel AISI 303 body, machined from a solid rod to optimize heat dissipation, gaskets to protect against dust and water penetrations and waterproof cable gland made of metal. 1 LED 2,5W 700mA high emission, 60° beam angle and screw lock nut. Stainless steel AISI 304 bracket in order to fix and adjust the orientation. The spot can be also fixed using the accessories, wall/ceiling (for an easy maintenance) and peg for the ground. IP68.
60°
IP68 2,5W
disegni tecnici/technical drawings illuminamento/illumination
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
1211
303
135
76
32
65
97
129
accessori/accessoriesPicchetto/ Attacco a parete (non inclusi p.335)
Peg/ Wall fastening (not included p.335)
bianco freddo/cool white
ø3072
74
Ta max 35°C Ta min -20°C1mmax
153
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX04010300NX
BLUX0401030WNX
colore/colour
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
acciaio inox/
stainless steel
acciaio inox/
stainless steel
fascio ottico/beam angle
60°
60°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
con staffa/
with bracket
con staffa/
with bracket
accessori/accessories
picchetto/attacco
peg/ wall fastening
picchetto/attacco
peg/ wall fastening
IP/IP
68
68
outdoor / underwateresterni / immersione
applicazioni/applicationsIlluminazione di monumenti, viali, segnapassi.Montaggio in immersione: profondità massima 1m.Non installare nelle vicinanze del mare, di aria salmastra, cloro o acque sulfuree./Monuments lighting and paths lighting. Underwater application: maximal depth 1m.Do not install nearby the sea, salt air, chlorine, sulphurus water.
*Esempio schemi di collegamento a p.345
Example of wiring diagram on p.345
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
3-5
4-12
4-12
8
/
alimentatori/LED drivers
WALIMLED 01700
WALIMLED 03700
WALIMLED 05700
WALIMLED 12700
WALIMLED 12700D
WALIM/DIMM/JOLLY
WBOKVAR
3W - 700mA - 32x50x18 (h)
10W - 700mA - 115x34x20 (h)
18W - 700mA - 160x45x32 (h)
36W - 700mA - 132x40x30 (h)
36W - 700mA - 132x40x30 (h) - dimm.
25W - 700mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
154
applicazioni/applicationsIlluminazione di monumenti, viali, segnapassi e fontane.Montaggio in immersione: profondità massima 1m./Monuments lighting, paths and fountain.Underwater application: maximal depth 1m.
lux 25_25°ottone cromato satinato
lux 25_25° sanded chromed brass
Faretto LED per esterni.Corpo in ottone cromato satinato ricavato dal pieno per ottimizzare la dissipazione del calore, guarnizioni di tenuta per la protezione contro infiltrazioni di polvere e di acqua, e pressaca-vo stagno in metallo. 3 LED da 1,2W 350mA ad alta resa, ottica con lente a tre comparti con fascio ottico 25°, vetro di protezione e ghiera di chiusura a vite. Staffa con forature per fissare il faretto e di orientarlo. Il faretto può essere fissa-to anche utilizzando gli accessori, attacco pare-te/plafone (per una manutenzione più agevole) e picchetto per il posizionamento nel terreno. IP68.
LED spot for outdoor use.Sanded chromed brass body machined from a solid rod to optimize heat dissipation, gaskets to protect against dust and water penetrations and waterproof cable gland made of metal. 3 LED 1,2W 350mA high emission, 25° beam angle, glass of protection and screw lock nut. Bracket in order to fix and adjust the orientation. The spot can be fixed using the accessories, wall/ceiling (for an easy maintenance) and peg for the ground. IP68.
0.50
1.00
1.50
2.00
disegni tecnici/technical drawings
illuminamento/illumination
4080
1020
453
255
30
45
65
90
h (m) E (lx) D (cm)
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX04034300CS
BLUX0403430WCS
colore/colour
cool white*
warm white*
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
fascio ottico/beam angle
25°*
25°*
ottica/optic
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
con staffa/with bracket
con staffa/with bracket
accessori/accessories
picchetto/attacco/peg/ wall fastening
picchetto/attacco/peg/ wall fastening
IP/IP
68
68
accessori/accessoriesPicchetto/ Attacco a parete (non inclusi p.335)
Peg/ Wall fastening (not included p.335)
80 44
80
25°
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
bianco freddo/cool white
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
3x1,2WIP68 Ta max 35°C Ta min -20°C1mmax
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
155
disegni tecnici/technical drawings
illuminamento/illumination
80 44
80
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
lux 25_10°ottone cromato satinato
lux 25_10° sanded chromed brass
Faretto LED per esterni.Corpo in ottone cromato satinato ricavato dal pieno per ottimizzare la dissipazione del calore, guarnizioni di tenuta per la protezione contro infiltrazioni di polvere e di acqua, e pressaca-vo stagno in metallo. 3 LED da 1,2W 350mA ad alta resa, ottica con lente a tre comparti con fascio ottico 10°, vetro di protezione e ghiera di chiusura a vite. Staffa con forature per fissare il faretto e di orientarlo. Il faretto può essere fissa-to anche utilizzando gli accessori, attacco pare-te/plafone (per una manutenzione più agevole) e picchetto per il posizionamento nel terreno. IP68.
LED spot for outdoor use.Sanded chromed brass body machined from a solid rod to optimize heat dissipation, gaskets to protect against dust and water penetrations and waterproof cable gland made of metal. 3 LED 1,2W 350mA high emission, 10° beam angle, glass of protection and screw lock nut. Bracket in order to fix and adjust the orientation. The spot can be fixed using the accessories, wall/ceiling (for an easy maintenance) and peg for the ground. IP68.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0403F300CS
BLUX0403F30WCS
colore/colour
cool white*
warm white*
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
fascio ottico/beam angle
10°*
10°*
ottica/optic
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
con staffa/with bracket
con staffa/with bracket
accessori/accessories
picchetto/attaccopeg/ wall fastening
picchetto/attaccopeg/ wall fastening
IP/IP
68
68
accessori/accessoriesPicchetto/ Attacco a parete (non inclusi p.335)
Peg/ Wall wall fastening (not included p.335)
0.50
1.00
1.50
2.00
12640
3160
1404
790
20
30
45
65
h (m) E (lx) D (cm)
10°
bianco freddo/cool white
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
applicazioni/applicationsIlluminazione di monumenti, viali, segnapassi e fontane.Montaggio in immersione: profondità massima 1m./Monuments lighting, paths and fountain.Underwater application: maximal depth 1m.
3x1,2WIP68 Ta max 35°C Ta min -20°C1mmax
VERIFICARE A FONDO CATALOGO LE INDICA-ZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
outdoor / underwateresterni / immersione
156156
lux 25_25° RGBottone cromato satinato
lux 25_25° RGB sanded chromed brass
Faretto LED per esterni.Corpo in ottone cromato satinato ricavato dal pieno per ottimizzare la dissipazione del calore, guarnizioni di tenuta per la protezione contro infiltrazioni di polvere e di acqua e pressacavo stagno in metallo. 3 LED RGB da 1W 350mA ad alta resa, ottica con lente a tre comparti con fascio ottico 25°, vetro di protezione e ghiera di chiusura a vite. Staffa con forature per fissare il faretto e orientarlo. Si possono utilizzare anche gli accessori: attacco parete/plafone e picchet-to. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando manuale agendo direttamente sul master o tra-mite telecomando. IP68. Utilizzare alimentazione 12V in immersione.
LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, gaskets to protect against dust and water penetrations and waterproof cable gland made of metal. 3 LED 1W 350mA high emission, 25° beam angle, glass of protection and screw lock nut. Bracket in order to fix and adjust the orientation. The spot can be fixed using the accessories: wall/ceiling and peg. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP68. When used in submerged applications, use only a 12V DMX system.
disegni tecnici/technical drawings fascio ottico/beam angle
accessori/accessories Picchetto/ Attacco a parete (non inclusi p.335)
Peg/ Wall fastening (not included p.335)
25°
IP68 3x1W RGB
80 44
80
Ta max 35°C Ta min -20°C1mmax
157
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX04034306CS
colore/colour
RGB
tipo/type
interni/ esterni/
interior/ outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
ottone/
brass
fascio ottico/beam angle
25°*
ottica/optic
orientabile/
adjustable
fissaggio/fixing
con staffa/
with bracket
accessori/accessories
picchetto/attacco/
telecomando
peg/ wall fastening/
remote control
IP/IP
68
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
applicazioni/applicationsIlluminazione di monu-menti, viali, segnapassi e fontane.Montaggio in immersio-ne: profondità massima 1m./Monuments lighting, paths and fountain.Underwater application: maximal depth 1m.
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
In immersione con sistema DMX/ Submerged applications with DMX system
Non in immersione/ Not for submerged applications
outdoor / underwater / decorativeesterni / immersione / decorativo
158158
lux 25_10° RGBottone cromato satinato
lux 25_10° RGB sanded chromed brass
accessori/accessoriesPicchetto/ Attacco a parete (non inclusi p.335)
Peg/ Wall fastening (not included p.335)
10°
disegni tecnici/technical drawings fascio ottico/beam angle
80 44
80
Faretto LED per esterni.Corpo in ottone cromato satinato ricavato dal pieno per ottimizzare la dissipazione del calore, guarnizioni di tenuta per la protezione contro infiltrazioni di polvere e di acqua e pressacavo stagno in metallo. 3 LED RGB da 1W 350mA ad alta resa, ottica con lente a tre comparti con fascio ottico 10°, vetro di protezione e ghiera di chiusura a vite. Staffa con forature per fissare il faretto e orientarlo. Si possono utilizzare anche gli accessori: attacco parete/plafone e picchet-to. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando manuale agendo direttamente sul master o tra-mite telecomando. IP68.Utilizzare alimentazione 12V in immersione.
LED spot for outdoor use.Sanded chromed brass body. Heat dissipator machined from a solid rod to optimize heat dissipation, gaskets to protect against dust and water penetrations and waterproof cable gland made of metal. 3 LED 1W 350mA high emission, 10° beam angle, glass of protection and screw lock nut. Bracket in order to fix and adjust the orientation. The spot can be fixed using the accessories: wall/ceiling and peg. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP68. When used in submerged applications, use only a 12V DMX system.
IP68 3x1W RGB Ta max 35°C Ta min -20°C1mmax
159
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BLUX0403F306CS
colore/colour
RGB
tipo/type
interni/ esterni/
interior/ outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
ottone/
brass
fascio ottico/beam angle
10°*
ottica/optic
orientabile/
adjustable
fissaggio/fixing
con staffa/
with bracket
accessori/accessories
picchetto/attacco/
telecomando
peg/ wall fastening/
remote control
IP/IP
68
*Disponibile con lente da 40° su richiesta. / 40° lens version on demand.
applicazioni/applicationsIlluminazione di monu-menti, viali, segnapassi e fontane.Montaggio in immersio-ne: profondità massima 1m./Monuments lighting, paths and fountain.Underwater application: maximal depth 1m.
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
2 DMX
6 DMX
17 DMX
28 DMX
70 DMX
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX (24V /12V)
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V) / 3 ( 12V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
In immersione con sistema DMX/ Submerged applications with DMX system
Non in immersione/ Not for submerged applications
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
outdoor / underwater / decorativeesterni / immersione / decorativo
160160
applicazioni/applicationsFacciate, zone di passaggio interno - esterno/Front lighting, interior - outdoor paths.
lux 25_25° + baseottone cromato satinato
lux 25_25° + base sanded chromed brass
Faretto LED per esterni. Corpo in ottone cromato satinato ricavato dal pieno per ottimizzare la dissipazione del calore, guarnizioni di tenuta per la protezione contro infiltrazioni di polvere e di acqua e pressacavo stagno in metallo. 3 LED da 1,2W 350mA ad alta resa, ottica con lente a tre comparti con fa-scio ottico 25°, vetro di protezione e ghiera di chiusura a vite. Staffa con forature che consen-te di fissare il faretto e di orientarlo. IP65. Completo di alimentatore all’interno della base in acciaio inox AISI 304 ver-niciata.
LED spot for outdoor use. Sanded chromed brass body for optimum heat dissipation, gaskets to protect against dust and water ingress and metal cable gland. 3 LED 1,2W 350mA high emission, 25° beam angle, protection glass and threaded front sealing ring. Stainless steel bracket to fix and adjust the orientation. IP65. LED driver integrated in the stainless steel AISI 304 base,varnished.
disegni tecnici/technical drawings
127
78
87
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BLUXB4034300CS
BLUXB403430WCS
colore/colour
cool white*
warm white*
tipo/type
interni/ esterni/
interior/ outdoor
interni/ esterni/
interior/ outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
ottone/ acciaio inox
brass/ stainless steel
ottone/ acciaio inox
brass/ stainless steel
fascio ottico/beam angle
25°*
25°*
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
IP/IP
65
65
fissaggio/fixing
tramite base/
with base
tramite base/
with base
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90 25°
illuminamento/illumination
Ta max 35°C3x1,2WIP65
bianco freddo/cool white
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
Ta min -20°C 230V
161
colore/colour
cool white*
warm white*
tipo/type
interni/ esterni/
interior/ outdoor
interni/ esterni/
interior/ outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
ottone/ acciaio inox
brass/ stainless steel
ottone/ acciaio inox
brass/ stainless steel
fascio ottico/beam angle
10°*
10°*
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
IP/IP
65
65
fissaggio/fixing
tramite base/
with base
tramite base/
with base
applicazioni/applications
Facciate, zone di passaggio interno - esterno/Front lighting, interior - outdoor paths
lux 25_10° + baseottone cromato satinato
lux 25_10° + base sanded chromed brass
Faretto LED per esterni. Corpo in ottone cromato satinato ricavato dal pieno per ottimizzare la dissipazione del calore, guarnizioni di tenuta per la protezione contro infiltrazioni di polvere e di acqua e pressacavo stagno in metallo. 3 LED da 1,2W 350mA ad alta resa, ottica con lente a tre comparti con fa-scio ottico 10°, vetro di protezione e ghiera di chiusura a vite. Staffa con forature che consen-te di fissare il faretto e di orientarlo. IP65.Completo di alimentatore all’interno della base in acciaio inox AISI 304 ver-niciata.
LED spot for outdoor use. Sanded chromed brass body for optimum heat dissipation, gaskets to protect against dust and water ingress and metal cable gland. 3 LED 1,2W 350mA high emission, 10° beam angle, protection glass and threaded front sealing ring. Stainless steel bracket to fix and adjust the orientation. IP65.LED driver integrated in the stainless steel AISI 304 base,varnished.
disegni tecnici/technical drawings
10°
127
78
87
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BLUXB403F300CS
BLUXB403F30WCS
illuminamento/illumination
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
12640
3160
1404
790
30
45
65
90
Ta max 35°C3x1,2WIP65
bianco freddo/cool white
*Disponibile con LED a luce colorata e/o con lente 40° su richiesta. / Coloured LED and/or with 40° lens on demand.
Ta min -20°C 230V
outdooresterni
162
lux 34ottone cromato
lux 34 chromed brass
Faretto LED per esterni.Corpo in ottone cromato ricavato dal pieno per ottimizzare la dissipazione del calore, guarnizio-ni di tenuta per la protezione contro infiltrazioni di polvere e di acqua, e pressacavo stagno in metallo. 4 LED 2W 500 mA (8W tot.) ad alta resa, ottica con lente a quattro comparti con fascio ottico 10°/25°/40°, vetro di protezione e ghiera di chiusura a vite. Staffa in acciaio inox con forature per fissare il faretto e di orientarlo. Il faretto può essere fissato anche utilizzando gli accessori, attacco parete/plafone (per una ma-nutenzione più agevole) e picchetto per il posi-zionamento nel terreno. IP65.
LED spot for outdoor use.Chromed brass body machined from a solid rod to optimize heat dissipation, gaskets for a protection against dust and water, metal cable gland. 4 LED 2W 500mA (8W tot.) high emission, 10°/25°/40° beam angle, protection glass and threaded ring. Stainless steel bracket in order to fix and adjust the orientation. The spot can be installed using wall/ceiling accessories, and a peg for a ground installation. IP65.
76107
113 51
6046
disegni tecnici/technical drawings
accessori/accessoriesPicchetto/ Attacco a parete (non inclusa p.335)
Peg/ Wall fastening (not included p.335)
4x2W Ta max 35°CIP65 Ta min -20°C
h (m)h (m) h (m) E (lx)E (lx) E (lx) D (cm)D (cm) D (cm)
10° 25° 40°
illuminamento/illuminationbianco freddo/cool white
0.50
1.00
1.50
2.00
2920
730
324
180
30
45
60
85
0.50
1.00
1.50
2.00
15280
3820
1690
955
10
20
30
40
0.50
1.00
1.50
2.00
6320
1580
702
395
15
30
40
50
163
codice/code
BLUX0904F300CR
BLUX0904F30WCR
BLUX09044300CR
BLUX0904430WCR
BLUX09047300CR
BLUX0904730WCR
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
04
04
04
04
04
04
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
ottone/
brass
ottone/
brass
ottone/
brass
ottone/
brass
ottone/
brass
ottone/
brass
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
con staffa/
with bracket
accessori/accessories
attacco/picchetto
wall fastening/peg
attacco/picchetto
wall fastening/peg
attacco/picchetto
wall fastening/peg
attacco/picchetto
wall fastening/peg
attacco/picchetto
wall fastening/peg
attacco/picchetto
wall fastening/peg
IP/IP
65
65
65
65
65
65
applicazioni/applicationsIlluminazione di monumenti, viali, segnapassi./Monuments lighting and paths lighting.
prodotto/product
tabella di riepilogo prodotti/ product overview table
*Esempio schemi di collegamento a p.344/ Example of wiring diagram on p.344
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
3
2
/
alimentatori/LED drivers
WALIMLED 04500
WALIMLED 08500
WALIMLED 12500
WALIM/DIMM/JOLLY
WBOKVAR
10W - 500mA
20W - 500mA - 165x40x25 (h)
26W - 500mA - 260x56x33 (h)
22W - 500mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
outdooresterni
166
miniskilled 01ottone cromato satinato
miniskilled 01 sanded chromed brass
codice/code
BLUX02L20500CS
BLUX02L2050WCS
BLUX02L20501CS
BLUX02L20502CS
BLUX02L20503CS
BLUX02L20504CS
colore/colour
cool white*
warm white*
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
65/67
65/67
65/67
65/67
65/67
65/67
Faretto a LED da incasso per esterni.Corpo in ottone cromato satinato e tecnopoli-mero. Dissipatore termico ricavato da billetta per ottimizzare la dispersione del calore, com-pleto di guarnizioni di tenuta per il fissaggio. 1 LED 1,2W 350mA ad alta resa. Emissione la-terale della luce attraverso 2 mini finestre posi-zionate a 90° e protette da un vetro di chiusura. Fissaggio con cassaforma in ABS (Luxcassa 1). IP65/67.
Recessed spot LED for outdoor use. Sanded brass chromed and techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA, high efficiency. Lateral emission of the light through 2 exit windows at 90° with glass protection. Fixation with ABS box (Luxcassa 1). IP65/67.
prodotto/product
tabella di riepilogo prodotti/ product overview table
disegni tecnici/technical drawings
applicazioni/applicationsSegnalazione di percorsi. Installazione in aree ad accesso limitato, di non pas-saggio (in prossimità di muri, etc) o su pareti./Signal paths. Decorative use, guidance marker.
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
ø44
55
9,5
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
accessori/accessoriesIncasso tramite cassaforma Luxcassa 1 (non inclusa p.333)
Recessed installation box Luxcassa 1 (not included p.333)
*Disponibile in versione neutral white su richiesta. / Neutral white LED on demand.
44
36
62
Ta min -20°C1,2WIP65/67 Ta max 35°C
167167
miniskilled 02ottone cromato satinato
miniskilled 02 sanded chromed brass
codice/code
BLUX02H20500CS
BLUX02H2050WCS
BLUX02H20501CS
BLUX02H20502CS
BLUX02H20503CS
BLUX02H20504CS
colore/colour
cool white*
warm white*
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
65/67
65/67
65/67
65/67
65/67
65/67
Faretto a LED da incasso per esterni.Corpo in ottone cromato satinato e tecnopolimero. Dissipatore termico ricavato da billetta per ottimiz-zare la dispersione del calore, completo di guarni-zioni di tenuta per il fissaggio. 1 LED 1,2W 350mA ad alta resa. Emissione laterale della luce attraverso 2 mini finestre posizionate a 180° e protette da un vetro di chiusura. Fissaggio con cassaforma in ABS (Luxcassa 1). IP65/67.
Recessed spot LED for outdoor use. Sanded brass chromed and techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA, high efficiency. Lateral emission of the light through 2 exit windows at 180° with glass protection. Fixation with ABS box (Luxcassa 1). IP65/67.
prodotto/product
tabella di riepilogo prodotti/ product overview table
disegni tecnici/technical drawings
applicazioni/applicationsSegnalazione di percorsi. Installazione in aree ad accesso limitato, di non pas-saggio (in prossimità di muri, etc) o su pareti./Signal paths. Decorative use, guidance marker.
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
ø44
55
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
accessori/accessoriesIncasso tramite cassaforma Luxcassa 1 (non inclusa p.333)
Recessed installation box Luxcassa 1 (not included p.333)
*Disponibile in versione neutral white su richiesta. / Neutral white LED on demand.
44
36
62
Ta min -20°C1,2WIP65/67 Ta max 35°C
9,5
outdooresterni
168
montaggio/installationIncasso tramite cassaforma Luxcassa 1 (non inclusa p.333)
Recessed installation box Luxcassa 1 (not included p.333)
miniskilled 03ottone cromato satinato
miniskilled 03 sanded chromed brass
codice/code
BLUX02030500CS
BLUX0203050WCS
BLUX02030501CS
BLUX02030502CS
BLUX02030503CS
BLUX02030504CS
prodotto/product
tabella di riepilogo prodotti/ product overview table
disegni tecnici/technical drawings
ø44
55
*Disponibile in versione neutral white su richiesta. / Neutral white LED on demand.
44
36
62
colore/colour
cool white*
warm white*
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
65/67
65/67
65/67
65/67
65/67
65/67
Faretto a LED da incasso per esterni.Corpo in ottone cromato satinato e tecnopoli-mero. Dissipatore termico ricavato da billetta per ottimizzare la dispersione del calore, com-pleto di guarnizioni di tenuta per il fissaggio. 1 LED 1,2W 350mA ad alta resa. Emissione la-terale della luce attraverso 3 mini finestre po-sizionate a 90° l’una dall’altra a coprire un an-golo di 180° e protette da un vetro di chiusura. Fissaggio con cassaforma in ABS (Luxcassa 1). IP65/67.
Recessed spot LED for outdoor use. Sanded brass chromed and techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA, high efficiency. Lateral emission of the light through 3 exit windows at 90° with glass protection. Fixation with ABS box (Luxcassa 1). IP65/67.
applicazioni/applicationsSegnalazione di percorsi. Installazione in aree ad accesso limitato, di non pas-saggio (in prossimità di muri, etc) o su pareti./Signal paths. Decorative use, guidance marker.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
Ta min -20°C1,2WIP65/67 Ta max 35°C
9,5
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
169
montaggio/installationIncasso tramite cassaforma Luxcassa 1 (non inclusa p.333)
Recessed installation box Luxcassa 1 (not included p.333)
miniskilled 04ottone cromato satinato
miniskilled 04 sanded chromed brass
codice/code
BLUX02040500CS
BLUX0204050WCS
BLUX02040501CS
BLUX02040502CS
BLUX02040503CS
BLUX02040504CS
prodotto/product
tabella di riepilogo prodotti/ product overview table
disegni tecnici/technical drawings
ø44
55
*Disponibile in versione neutral white su richiesta. / Neutral white LED on demand.
44
36
62
colore/colour
cool white*
warm white*
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
LED/LED
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottone/brass
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
accessori/accessories
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
Luxcassa 1
IP/IP
65/67
65/67
65/67
65/67
65/67
65/67
Faretto a LED da incasso per esterni.Corpo in ottone cromato satinato e tecnopoli-mero. Dissipatore termico ricavato da billetta per ottimizzare la dispersione del calore, com-pleto di guarnizioni di tenuta per il fissaggio. 1 LED 1,2W 350mA ad alta resa. Emissione late-rale della luce attraverso 4 mini finestre posizio-nate a 90° l’una dall’altra e protette da un vetro di chiusura. Fissaggio con cassaforma in ABS (Luxcassa 1). IP65/67.
Recessed spot LED for outdoor use. Sanded brass chromed and techno-polymer body. Heat dissipator machined from a solid rod to optimize heat dissipation, with O-ring. 1 LED 1,2W 350mA, high efficiency. Lateral emission of the light through 4 exit windows at 90° with glass protection. Fixation with ABS box (Luxcassa 1). IP65/67.
applicazioni/applicationsSegnalazione di percorsi. Installazione in aree ad accesso limitato, di non pas-saggio (in prossimità di muri, etc) o su pareti./Signal paths. Decorative use, guidance marker.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
Ta min -20°C1,2WIP65/67 Ta max 35°C
9,5
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
outdooresterni
170 *Fino ad esaurimento. /Until exhaustion.
Ta min -20°C
10558
57
accessori/accessoriesCassaforma Boxskill 2 per interni/ Boxskill 1 per esterni (non inclusa p.333)
Recessed installation box Boxskill 2 for interior/ Boxskill 1 for outdoor (not included p.333)
disegni tecnici/technical drawings
155
185
58,5
applicazioni/applicationsAdatto per segnalazione limitrofa di passaggi coperti o sotto tettoie ecc.Non installare in luoghi soggetti a momentanea immersione (es. pozzanghera)./Suitable for signal adjacent to covered walkways.Do not install in locations with temporary water immersion (example puddle).
skilled 04alluminio
skilled 04 aluminum
Apparecchio da incasso a LEDper esterni. Corpo in fusione di alluminio verniciato grigio. 1 LED da 1,2W 350mA ad alta resa, posizionato centralmente per l’emissione verso l’alto della luce attraverso un vetro di chiusura con guar-nizione. Grado di protezione IP54. Il fissaggio può avvenire con due tipologie diverse di cas-saforme in alluminio a seconda della profondità disponibile per l’incasso: Boxskill 1 studiata per gli esterni e Boxskill 2 studiata per gli interni. Pedonabile.
Recessed fitting with LEDfor outdoor use.Die-casted grey varnished aluminum body. 1 LED 1,2W 350mA high emission, with a central emission of the light through a protection glass with gaskets. IP54. Installation with aluminum boxes; Boxskill 1 for outdoor use and Boxskill 2 for interior use. Walk over.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BSK12500GR*
colore/colour
cool white
tipo/type
interni/esterni
interior/outdoor
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
fissaggio/fixing cassaforma/
box
accessori/accessories
Boxskill 1
Boxskill 2
IP/IP
54
Ta max 35°C1,2W
Ø142
100
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
IP54
171
outdooresterni
accessori/accessoriesCassaforma Boxskill 2 per interni/ Boxskill 1 per esterni (non inclusa p.333)
Recessed installation box Boxskill 2 for interior/ Boxskill 1 for outdoor (not included p.333)
codice/code
BSK12500NX
BSK12501NX
BSK12502NX
BSK12503NX
BSK12504NX
colore/colour
cool white
blu/blue
verde/green
ambra/amber
rosso/red
tipo/type
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
interni/ esterni/interior/ outdoor
LED/LED
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/ acciaio inox/aluminum/ stainless steel
alluminio/ acciaio inox/aluminum/ stainless steel
alluminio/ acciaio inox/aluminum/ stainless steel
alluminio/ acciaio inox/aluminum/ stainless steel
alluminio/ acciaio inox/aluminum/ stainless steel
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
cassaforma/ box
accessori/accessories
Boxskill 1Boxskill 2
Boxskill 1Boxskill 2
Boxskill 1Boxskill 2
Boxskill 1Boxskill 2
Boxskill 1Boxskill 2
IP/IP
65/67
65/67
65/67
65/67
65/67
prodotto/product
tabella di riepilogo prodotti/ product overview table
disegni tecnici/technical drawings
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
skilled 03alluminio e acciaio inox
skilled 03 aluminum and stainless steel
Apparecchio da incasso a LED per esterni.Carrabile fino a 500 kg. Corpo in fusione di alluminio. 1 LED 350mA ad alta resa bianco o colorato, posizionato per l’emissione laterale della luce attraverso un disco in policar-bonato trasparente sormontato da un coperchio di chiusura in acciaio inox AISI 304 satinato con guarnizione. IP65/67. Il fissaggio può avvenire con due tipologie diverse di cassaforme in alluminio a seconda della profondità disponibile per l’incasso; Boxskill 1 studiata per gli esterni e Boxskill 2 studia-ta per gli interni. Assorbimento: 1,8W. Collegamento in parallelo, 24V DC.
Recessed fitting with LED for outdoor use.Weight resistant kg 500.Die-casted aluminum body. 1 LED 350mA high emission white or coloured, positioned for a lateral light emission through a clear disk of polycarbonate closed with a cover in sanded stainless steel AISI 304, with gasket. IP65/67. Installation with aluminum boxes; Boxskill 1 for outdoor use, Boxskill 2 for interior use. Power consumption:1,8W. Parallel connection, 24V DC.
applicazioni/applicationsSegnalazione limitrofa di giardini, cortili, piste ciclabili, percorsi pedonabili, aree pedonabili o zone poco sollecitate. Luce radente per segnalazione di percorsi o l’evidenziazione di ostacoli in esterno e all’interno di edifici o aree di transito./For signal path in gardens, courts, bicycle paths, pedestrian paths,pedestian areas and areas with light traffic. Razing light for path lighting, for outdoor or interior use.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
WALIM/DIMM/JOLLY
WBOKVAR
20W - 24V - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
10
/
155
185
58,5
Ø142
100
63
ø58
ø105ø118
172
skilled 03 RGBalluminio e acciaio inox
skilled 03 RGBaluminum and stainless steel
Apparecchio da incasso a LEDper esterni.Carrabile fino a 500 kg. Corpo in fusione di alluminio. 1 LED da 4,6W 350mA ad alta resa RGB, posizionato per l’e-missione laterale della luce attraverso un disco in policarbonato trasparente sormontato da un coperchio di chiusura in acciaio inox AISI 304 satinato con guarnizione. L’effetto che si ottiene è una luce radente ideale per la segnalazione di percorsi o l’evidenziazione di ostacoli sia in esterno che all’interno di edifici o aree di tran-sito. Il grado di protezione IP65/67 consente la protezione da infiltrazioni di polvere e di acqua. Il fissaggio può avvenire con due tipologie diver-se di cassaforme in alluminio a seconda della profondità disponibile per l’incasso; Boxskill 1 studiata per gli esterni e Boxskill 2 studiata per gli interni.
Recessed fitting with LEDfor outdoor use. Weight resistant kg 500.Die-casted aluminum body. 1 LED RGB 4,6W 350mA high emission, positioned for a lateral light emission through a clear disk of polycarbonate closed with a sanded stainless steel AISI 304 cover with gasket. The effect is a razing light for path lighting, for outdoor or interior use. IP65/67, protected against dust and water ingress. Installation with aluminum boxes; Boxskill 1 for outdoor use and Boxskill 2 for interior use.
disegni tecnici/technical drawings
accessori/accessoriesCassaforma Boxskill 2 per interni/ Boxskill 1 per esterni (non inclusa p.333)
Recessed installation box Boxskill 2 for interior/ Boxskill 1 for outdoor (not included p.333)
63
ø58
ø105ø118
500Kg
155
185
58,5
Ø142
100
173
*Esempio schemi di collegamento a p.354-356
Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
3
7
11
18
45
alimentatori/LED drivers
applicazioni/applicationsSegnalazione limitrofa di giardini, cortili, piste ciclabili, percorsi pedonabili, aree pedonabili e zone poco sollecitate./For signal path in gardens, courts, bicycle paths, pedestrian paths, pedestian areas and areas with light traffic.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BSK12505NX
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
acciaio inox/
aluminum/
stainless steel
ottica/optic
fissa/
fixed
fissaggio/fixing cassaforma/
box
accessori/accessories
telecomando /
remote control/
Boxskill 1/
Boxskill 2
IP/IP
65/67
controllo RGB/controller RGB
alimentatori/ LED drivers - Controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-capController
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
3
/
/
/
5
3
Telecomando / Remote control
(con/with WMASTERRGB5X3l)WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
!
outdoor / decorativeesterni / decorativo
174
32,2
105
53
ø118,8
accessori/accessoriesCassaforma Boxskill 1 studiata per esterni (non inclusa p.333)
Recessed installation box Boxskill 1 for outdoor (not included p.333)
disegni tecnici/technical drawings
applicazioni/applicationsSegnalazione percorsi, parcheggi./Paths signalization, parking.
skilled 01 SUValluminio
skilled 01 SUV aluminum
Apparecchio da incasso LED per esterni.Carrabile fino a 3000 kg. Corpo in fusione di alluminio verniciato grigio. 1 LED 350mA ad alta resa posizionato per l’emissione laterale della luce attraverso 2 finestre. Il grado di protezione IP65/67 consente la protezione da infiltrazioni di polvere e di acqua. Fissaggio tramite cassaforma in alluminio (Boxskill 1). Assorbimento: 1,8W. Collegamento in parallelo, 24V DC.
Recessed fitting with LED for outdoor use.Weight resistant kg 3000.Die-casted aluminum grey varnished body. 1 LED 350mA, high efficiency with the lateral light emission through 2 exit windows. IP65/67, protected against dust and water ingress. Fixation with aluminum box (Boxskill 1). Absorption: 1,8W.Parallel connection, 24V DC.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BSKL02020300GR
colore/colour
cool white
tipo/type
esterni/
outdoor
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
fissaggio/fixing cassaforma/
box
accessori/accessories
Boxskill 1
IP/IP
65/67
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
WALIM/DIMM/JOLLY
WBOKVAR
20W - 24V - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
10
/
Ø142
100
175
32,2
105
53
ø118,8
accessori/accessoriesCassaforma Boxskill 1 studiata per esterni (non inclusa p.333)
Recessed installation box Boxskill 1 for outdoor (not included p.333)
disegni tecnici/technical drawings
applicazioni/applicationsSegnalazione percorsi, parcheggi./Paths signalization, parking.
skilled 02 SUValluminio
skilled 02 SUV aluminum
Apparecchio da incasso LED per esterni.Carrabile fino a 3000 kg. Corpo in fusione di alluminio verniciato grigio. 1 LED 350mA ad alta resa posizionato per l’emissione laterale della luce attraverso 4 finestre. Il grado di protezione IP65/67 consente la protezione da infiltrazioni di polvere e di acqua. Fissaggio tramite cassaforma in alluminio (Boxskill 1). Assorbimento: 1,8W.Collegamento in parallelo, 24V DC.
Recessed fitting with LED for outdoor use.Weight resistant kg 3000.Die-casted aluminum grey varnished body. 1 LED 350mA, high efficiency with the lateral light emission through 4 exit windows. IP65/67, protected against dust and water ingress. Fixation with aluminum box (Boxskill 1). Absorption: 1,8W.Parallel connection, 24V DC.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BSKL02040300GR
colore/colour
cool white
tipo/type
esterni/
outdoor
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
fissaggio/fixing cassaforma/
box
accessori/accessories
Boxskill 1
IP/IP
65/67
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
WALIM/DIMM/JOLLY
WBOKVAR
20W - 24V - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
10
/
outdooresterni
Ø142
100
176
skilled 03 SUValluminio e acciaio inox
skilled 03 SUValuminum and stainless steel
Apparecchio da incasso a LED per esterni.Carrabile fino a 3000 kg. Corpo in alluminio, acciaio inox AISI316 satinato e policarbonato. Effetto luce radente bianca/blu/verde/ambra/rossa. 1 LED 350mA ad alta resa e posizionato per l’emissione laterale della luce attraverso un disco in policarbonato trasparente sormontato da un coperchio di chiusura in ac-ciaio inox con guarnizione. Il grado di protezione IP65/67 consente la protezione da infiltrazioni di polvere e di acqua. Fissaggio tramite due tipi di cassaforme in alluminio (Boxskill 1 per esterni e Boxskill 2 per interni). Assorbimento: 1,8W.Collegamento in parallelo, 24V DC.
Recessed fitting with LED for outdoor usa.Weight resistant kg 3000.Aluminum body, sanded stainless steel AISI316 and polycarbonate. Razing light white/blue/green/amber/red. 1 LED 350mA, high efficiency. Positioned for a lateral emission through a clear disk of polycarbonate closed with a stainless steel cover with gasket. IP65/67, protected against dust and water ingress. Fixation with aluminum boxes (Boxskill 1 for outdoor use and Boxskill 2 for interior use). Absorption: 1,8W.Parallel connection, 24V DC.
ø118
ø58
ø105
66,2
disegni tecnici/technical drawings
accessori/accessoriesCassaforma Boxskill 2 per interni/ Boxskill 1 per esterni (non inclusa p.333)
Recessed installation box Boxskill 2 for interior/ Boxskill 1 for outdoor (not included p.333)
155
185
58,5
Ø142
100
IP65/67 Ta max 35°C3000Kg Ta min -20°C1,8W
177
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BSKL02010300NX
colore/colour
cool white
tipo/type
interni/esterni
interior/outdoor
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/ acciaio inox/
aluminum/ stainless steel
ottica/optic
fissa/
fixed
fissaggio/fixing cassaforma/
box
accessori/accessories
Boxskill 1
Boxskill 2
IP/IP
65/67
*Possibilità in alimentazione IN 24V, OUT 700mA su richiesta. / Feeding IN 24V, OUT 700mA on demand.
applicazioni/applicationsSegnalazione di percorsi o evidenziazione di ostacoli sia in parcheggi sia in aree di transito./Paths signalization, parking.
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
WALIM/DIMM/JOLLY
WBOKVAR
20W - 24V - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
10
/
outdooresterni
178
skilled 03 SUV RGBalluminio e acciaio inox
skilled 03 SUV RGBaluminum and stainless steel
Apparecchio da incasso LED per esterni. Carrabile fino a 3000 kg. Corpo in alluminio, acciaio inox AISI316 satina-to e policarbonato. Effetto luce radente. 1 LED RGB 4,6W ad alta resa posizionato per l’emis-sione laterale della luce attraverso un disco in policarbonato trasparente sormontato da un coperchio di chiusura in acciaio inox AISI316 con guarnizione. Il grado di protezione IP65/67 consente la protezione da infiltrazioni di polvere ed acqua. Fissaggio tramite due tipi di cassafor-me in alluminio (Boxskill 1 per esterni e Boxskill 2 per interni).
Recessed LED spot for outdoor use.Weight resistant kg 3000.Aluminum body, sanded stainless steel AISI316 and polycarbonate. Razing light.1 LED RGB 4,6W, high efficiency. Positioned for a lateral light emission through a clear disk of polycarbonate closed with a sanded AISI316 stainless steel cover with gasket. IP65/67 protected against dust and water ingress. Fixation with aluminum boxes (Boxskill 1 for outdoor use and Boxskill 2 for interior use).
disegni tecnici/technical drawings
ø118
ø58
ø105
66,2
accessori/accessoriesCassaforma Boxskill 2 per interni/ Boxskill 1 per esterni (non inclusa p.333)
Recessed installation box Boxskill 2 for interior/ Boxskill 1 for outdoor (not included p.333)
155
185
58,5
Ø142
100
IP65/67 3000Kg Ta max 35°C4,6W RGB Ta min -20°C
179
tabella di riepilogo prodotti/ product overview table
colore/colour
RGB
tipo/type
interni/esterni
interior/outdoor
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
acciaio inox/
aluminum/
stainless steel
ottica/optic
fissa/
fixed
fissaggio/fixing cassaforma/
box
accessori/accessories
Boxskill 1
Boxskill 2
IP/IP
65/67
applicazioni/applicationsSegnalazione di percorsi o evidenziazione di ostacoli sia in parcheggi sia in aree di transito./Paths signalization, parking.
*Esempio schemi di collegamento a p.354-356
Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
3
7
11
18
45
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
controllo RGB/controller RGB
alimentatori/ LED drivers - Controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-capController
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
3
/
/
/
5
3
Telecomando / Remote control
(con/with WMASTERRGB5X3l)WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
!
prodotto/product
codice/code
BSKL02010305NX
outdoor / decorativeesterni / decorativo
182
applicazioni/applicationsIlluminazione di vetrine, librerie, risalto di oggetti preziosi./Display-cases and book-cases lighting, precious objects lighting.
Faretto LED orientabile per interni.Corpo in profilato di alluminio anodizzato estru-so di ridotte dimensioni, con testatine di chiusu-ra complete di staffette di fissaggio in acciaio. 3 LED da 1,2W 350mA ad alta resa con ottica da 110° montati su circuito per una migliore stabi-lità. Dissipatore interno in alluminio per ottimiz-zare la dispersione del calore. Uscita laterale del cavo di alimentazione mediante pressacavo in materiale sintetico. Montaggio a parete o pla-fone. IP40. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Adjustable LED spot for interior use.Anodized aluminum body with small dimensions, end-caps with stainless steel brackets. 3 LED 1,2W 350mA high emission with 110° beam angle, installed on a circuit for a best stability. Aluminum built in dissipator to optimize the heat dissipation. Lateral feeding cable through a synthetic gland. Wall or ceiling mounting. IP40. Excellent Colour Rendering Index (warm white = CRI >90).
disegni tecnici/technical drawings
illuminamento/illumination
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
0.25
0.50
0.75
1.00
1120
280
120
70
/
/
/
/
h (m) E (lx) D (cm)
110°
stick_orizzontalealluminio anodizzato
stick_horizontal anodized aluminum
d
3825
28
8595
25
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BBOK04030300AA
BBOK0403030WAA
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
110°
110°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
IP/IP
40
40
fissaggio/fixing
con staffa/
with bracket
con staffa/
with bracket
bianco freddo/cool white
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
Ta max 35°C3x1,2WIP40
183
disegni tecnici/technical drawings
illuminamento/illumination
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
interiorinterni
applicazioni/applicationsIlluminazione di vetrine, librerie, risalto di oggetti preziosi./Display-cases and book-cases lighting, precious objects lighting.
Faretto LED orientabile per interni.Corpo in profilato di alluminio anodizzato estru-so di ridotte dimensioni, con testatine di chiusu-ra complete di staffette di fissaggio in acciaio. 3 LED da 1,2W 350mA ad alta resa con lenti da 60° montati su circuito per una migliore stabilità. Dissipatore interno in alluminio per ottimizzare la dispersione del calore. Uscita laterale del cavo di alimentazione mediante pressacavo in ma-teriale sintetico. Montaggio a parete o plafone. IP40. Eccellente Indice di Resa Cromatica (warm white = CRI >90).BREVETTATO.
Adjustable LED spot for interior use.Anodized aluminum body with small dimensions, end-caps with stainless steel brackets. 3 LED 1,2W 350mA high emission with 60° beam angle, installed on a circuit for a best stability. Aluminum built in dissipator to optimize the heat dissipation. Lateral feeding cable through a synthetic gland. Wall or ceiling mounting. IP40. Excellent Colour Rendering Index (warm white = CRI >90).PATENTED.
0.25
0.50
0.75
1.00
3200
800
350
200
40
70
100
140
h (m) E (lx) D (cm)
60°
stick L_orizzontalealluminio anodizzato
stick L_horizontal anodized aluminum
d
28
8595
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BBOK04036300AA
BB0KO403630WAA
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fascio ottico/beam angle
60°
60°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
IP/IP
40
40
fissaggio/fixing
con staffa/
with bracket
con staffa/
with bracket
bianco freddo/cool white
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
Ta max 35°C3x1,2WIP40
tipologia a richiesta con quantitativi minimi/on demand with a minimum quantityStick con flessibile in alluminio/ Stick con Tige
Stick with flexible aluminum arm/ Stick with rigid arm
184
Faretto LED orientabile per interni.Corpo in profilato di alluminio estruso ano-dizzato di ridotte dimensioni, con testatine di chiusura. 3 LED da 1,2W 350mA ad alta resa con ottica da 110° montati su circuito per una migliore stabilità. Dissipatore interno in alluminio per ottimizzare la dispersione del calore. Snodo incorporato in alluminio e metallo cromato che consente di fissare il faretto e di orientarlo. Nes-sun cavo è visibile all’esterno in quanto il pas-saggio dell’alimentazione avviene attraverso lo snodo. IP40. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Adjustable LED spot for interior use.Anodized aluminum body with small dimensions, with end-caps. 3 LED 1,2W 350mA high emission with 110° beam angle, installed on a circuit for a best stability. Aluminum built in dissipator to optimize heat dissipation. Aluminum and chromed finish fixing joint included, that allows to adjust and fix the orientation. No cables are visible because the feeding runs through the joint. IP40. Excellent Colour Rendering Index (warm white = CRI >90).
disegni tecnici/technical drawings
illuminamento/illumination
0.25
0.50
0.75
1.00
1120
280
120
70
/
/
/
/
h (m) E (lx) D (cm)
110°
stick_verticalealluminio anodizzato
stick_vertical anodized aluminum
d
applicazioni/applicationsIlluminazione di vetrine, librerie, risalto di oggetti preziosi./Display-cases and book-cases lighting, precious objects lighting.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BBOKS4030300AA
BBOKS403030WAA
colore/colour
cool white*
warm white*
tipo/type
interni/interior
interni/interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
110°
110°
ottica/optic
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
con snodo/with joint
con snodo/with joint
IP/IP
40
40
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
121
30
30
Ta max 35°C3x1,2WIP40
bianco freddo/cool white
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
185
tipologia a richiesta con quantitativi minimi/on demand with a minimum quantityStick con flessibile in alluminio/ Stick con Tige
Stick with flexible aluminum arm/ Stick with rigid arm
Faretto LED orientabile per interni.Corpo in profilato di alluminio estruso anodizzato di ridotte dimensioni, con testatine di chiusura. 3 LED da 1,2W 350mA ad alta resa con lenti da 60° montati su circuito per una migliore stabilità. Dissipatore interno in alluminio per ottimizzare la dispersione del calore. Snodo incorporato in allu-minio e metallo cromato che consente di fissare il faretto e di orientarlo. Nessun cavo è visibile all’e-sterno in quanto il passaggio dell’alimentazione avviene attraverso lo snodo. IP40. Eccellente In-dice di Resa Cromatica (warm white = CRI >90).BREVETTATO.
Adjustable LED spot for interior use.Anodized aluminum body with small dimensions, with end-caps. 3 LED 1,2W 350mA high emission with 60° beam angle, installed on a circuit for a best stability. Aluminum built in dissipator to optimize heat dissipation. Aluminum and chromed finish fixing joint included, that allows to adjust and fix the orientation. No cables are visible because the feeding runs through the joint. IP40. Excellent Colour Rendering Index (warm white = CRI >90).PATENTED.
disegni tecnici/technical drawings
illuminamento/illumination
0.25
0.50
0.75
1.00
3200
800
350
200
/
/
/
/
h (m) E (lx) D (cm)
60°
stick L_verticalealluminio anodizzato
stick L_vertical anodized aluminum
d
applicazioni/applicationsIlluminazione di vetrine, librerie, risalto di oggetti preziosi./Display-cases and book-cases lighting, precious objects lighting.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BBOKS4036300AA
BBOKS403630WAA
colore/colour
cool white*
warm white*
tipo/type
interni/interior
interni/interior
LED/LED
03
03
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/aluminum
alluminio/aluminum
fascio ottico/beam angle
60°
60°
ottica/optic
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
con snodo/with joint
con snodo/with joint
IP/IP
40
40
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
2
4
4
/
*Esempio schemi di collegamento a p.343/ Example of wiring diagram on p.343
alimentatori/LED drivers
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
121
30
Ta max 35°C3x1,2WIP40
bianco freddo/cool white
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
interiorinterni
tipologia a richiesta con quantitativi minimi/on demand with a minimum quantityFlexed con flessibile in metallo nero
Flexed with black flexible metal arm
186
Lampada flessibile a LED per interni.Guaina flessibile semirigida in alluminio rivesti-ta in materiale sintetico di colore nero. Corpo in alluminio anodizzato. 1 LED da 1,2W 350mA ad alta resa dotato di ottica orientabile e lente da 60°. Fissaggio tramite basetta in alluminio anodizzato. Nessun cavo è visibile all’esterno in quanto il passaggio dell’alimentazione avviene attraverso la guaina e la basetta. Disponibile con flessibile in metallo.
Flexible LED lamp for interior use.Anodized aluminum body. Flexible black coated aluminum stem. 1 LED 1,2W 350mA high emission provided with a adjustable optic and 60° beam angle. Fixed through an aluminum anodized plate. No cables are visible, because the wiring runs through the sheating and plate. Available with flexible metal arm.
disegni tecnici/technical drawings
illuminamento/illumination
0.25
0.50
0.75
1.00
725
181
81
45
30
60
89
119
h (m) E (lx) D (cm)
flexledalluminio anodizzato
flexled anodized aluminum
applicazioni/applicationsIlluminazione di opere d’arte, di particolari, postazioni di lavoro,postazioni di lettura, testaletto e vetrine./Fine arts lighting, showcase lighting and reading light.
tabella di riepilogo prodotti/ product overview table
5115
30
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
8
3-12
12
/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
prodotto/product
codice/code
BFLES4010500NE
BFLES401050WNE
BFLES4010500CR
BFLES401050WCR
colore/colour
cool white*
warm white*
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
interni/
interior
interni/
interior
LED/LED
01
01
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/ dekabon/ flessibile nero
aluminum/ dekabon/ black flexible
alluminio/ dekabon/ flessibile nero
aluminum/ dekabon/ black flexible
alluminio/ dekabon/ flessibile cromato
aluminum/ dekabon/ chromed flexible
alluminio/ dekabon/ flessibile cromato
aluminum/ dekabon/ chromed flexible
fascio ottico/beam angle
60°
60°
60°
60°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
tramite base/
with base
tramite base/
with base
tramite base/
with base
tramite base/
with base
IP/IP
40
40
40
40
60°
h tot.460
bianco freddo/cool white
*Disponibile in versione neutral white o con LED a luce colorata su richiesta. / Neutral white or coloured LED on demand.
Ta max 35°C1,2WIP40
187
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BFLES4016300NE
BFLES401630WNE
BFLES4016300CR
BFLES401630WCR
colore/colour
cool white*
warm white*
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
interni/
interior
interni/
interior
LED/LED
01
01
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/ dekabon/ flessibile nero
aluminum/ dekabon/ black flexible
alluminio/ dekabon/ flessibile nero
aluminum/ dekabon/ black flexible
alluminio/ dekabon/ flessibile cromato
aluminum/ dekabon/ chromed flexible
alluminio/ dekabon/ flessibile cromato
aluminum/ dekabon/ chromed flexible
fascio ottico/beam angle
60°
60°
60°
60°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
tramite base/
with base
tramite base/
with base
tramite base/
with base
tramite base/
with base
IP/IP
40
40
40
40
Lampada flessibile a LED per interni.Flessibile semirigida in alluminio cromato. Corpo in alluminio anodizzato. LED da 2,5W 700mA ad alta resa dotato di ottica I.R.L. con lente da 60°. Fissaggio tramite basetta in alluminio anodizza-to. Nessun cavo è visibile all’esterno in quanto il passaggio dell’alimentazione avviene attraverso la guaina e la basetta. Disponibile con guaina nera. Eccellente Indice di Resa Cromatica (warm white = CRI >90).
Flexible lamp at LED for interior use.Aluminum flexible sheating in chromed aluminum. Anodized aluminum body. LED 2,5W 700mA high emission provided with I.R.L. optic with lens 60°. Fixed through an aluminum anodized plate. No cables are visible because the feeding runs through the sheating and plate. Available with flexible black sheating coated. Excellent Colour Rendering Index (warm white = CRI >90).
disegni tecnici/technical drawings
illuminamento/illumination
0.25
0.50
0.75
1.00
1266
316
141
79
33
65
98
130
h (m) E (lx) D (cm)
flexled 3Walluminio anodizzato
flexled 3W anodized aluminum
applicazioni/applicationsIlluminazione di opere d’arte, di particolari, postazioni di lavoro.Indicata per illuminazione di postazioni di lettura, testaletto e vetrine. /Fine arts lighting, reading light and showcase lighting.
30
h tot.460
32
60
60°
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
3-5
4-12
4-12
8
/
*Esempio schemi di collegamento a p.345/ Example of wiring diagram on p.345
alimentatori/LED drivers
WALIMLED 01700
WALIMLED 03700
WALIMLED 05700
WALIMLED 12700
WALIMLED 12700D
WALIM/DIMM/JOLLY
WBOKVAR
3W - 700mA - 32x50x18 (h)
10W - 700mA - 115x34x20 (h)
18W - 700mA - 160x45x32 (h)
36W - 700mA - 132x40x30 (h)
36W - 700mA - 132x40x30 (h) - dimm.
25W - 700mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
bianco freddo/cool white
Ta max 35°C2,5WIP40
*Disponibile in versione neutral white o con LED a luce colorata su richiesta. / Neutral white or coloured LED on demand.
interiorinterni
188
Lampada LED a morsetto per interni.Composta da due moduli orientabili singolar-mente costruiti in profilato di alluminio anodiz-zato con testatine di chiusura, ciascuno con 3 LED da 1,2W 350mA ad alta resa con fascio ottico da 110°, montati su circuito per una mi-gliore stabilità, dotati di dissipatore interno in alluminio. Le aste sono in metallo cromato e trasmettono l’alimentazione. Il fissaggio avvie-ne tramite un morsetto in materiale sintetico trasparente dal nuovo design, in grado di poter essere bloccato sia su superfici piane che tu-bolari. Eccellente Indice di Resa Cromatica (warm white = CRI >90).Alimentatore remoto, incluso.
LED lamp with clamp for interior use.Composed by two adjustable parts in aluminum profile with end-caps, each with 3 LED 1,2W 350mA high emission with 110° beam angle. Rods are chromed and conduct the current. Fixation with a clear synthetic clamp. It can be fixed on flat surfaces or tubes. Excellent Colour Rendering Index (warm white = CRI >90).Remote LED driver, included.
disegni tecnici/technical drawings
illuminamento/illumination
0.25
0.50
0.75
1.00
1200
300
130
75
/
/
/
/
h (m) E (lx) D (cm)
110°
clemente LEDalluminio
clemente LED aluminum
d
applicazioni/applications
Illuminazione di pannelli-mostre, negozi, librerie, vetrine, scaffalie postazioni di lavoro e di studio./Panel-exhibition, bookcases lighting,working places and offices.
570
200
68
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BCLEMLED
colore/colour
cool white*
tipo/type
interni/
interior
LED/LED
06
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
fascio ottico/beam angle
110°
ottica/optic
orientabile/
adjustable
IP/IP
40
fissaggio/fixing
tramite morsetto/
with clamp
IP40 6x1,2W
bianco freddo/cool white
*Disponibile con LED a luce calda o colorata su richiesta. / Warm white LED or coloured LED on demand.
Ta max 35°C
189
Lampada LED in bassa tensione 12V.Composta da due aste conduttrici del diametro di 4mm. e distanziate tra loro di 20mm. Finitura in ot-tone cromato lucido. La lunghezza delle aste (max. cm 50) può variare in quanto scorrevoli su un mor-setto in plexiglass trasparente che può pizzicare qualsiasi superficie piana o tonda sino ad un mas-simo di 60mm. All’estremità è posta la lampadina LED orientabile. Potenza max. 7W e temperatura colore 3000°K. Il fissaggio della lampadina è di tipo meccanico attraverso 4 grani a brugola. La massi-ma orientabilità è garantita sia sul piano orizzonta-le sia sul piano verticale ed è possibile orientare il fascio luminoso anche durante l’accensione della lampada, grazie ad un particolare in plexiglass iso-lato posto sopra la lampadina. Alimentatore remoto incluso.
12V LED luminaire.Composed by conductor rods 4mm in diameter, 20mm apart. Chrome finish. The length of the rods (max. 55cm) can be adjusted with a clamp made of clear Plexiglass. This clamp can be attached to either a round or flat surface to a maximum thickness of 60mm. At the top there is a rotating LED lamp at 7W, color temperature 3000°K .The lamp can be fixed with 4 small screws. It is possible to rotate horizontally or vertically. It also possible to orient, while it has been switch on, with a Plexiglas lever.Remote LED driver included.
disegni tecnici/technical drawings
fascio ottico/beam angle
clemente master LEDottone cromato
clemente master LED chromed brass
applicazioni/applications
Illuminazione di pannelli-mostre, negozi, librerie, vetrine, scaffalie postazioni di lavoro e di studio./Panel-exhibition, bookcases lighting,working places and offices.
570
68
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BCLEMLEDM
colore/colour
warm white
tipo/type
interni/
interior
LED/LED
04
tipo di LED/LED type
alta emissione/
high emission
materiale/material
ottone/
brass
fascio ottico/beam angle
24°
ottica/optic
orientabile/
adjustable
IP/IP
20
fissaggio/fixing
tramite morsetto/
with clamp
IP20 Ta max 35°C
24°
7W
interiorinterni
190
exalightacciaio
exalight steel
180
11
54
54
150
Sistema modulare a LED a formaesagonale.E’ formato da una base di fissaggio che con-tiene il sistema di alimentazione e da una cover esagonale in acciaio con finitura bianca o nera opaca. La cover viene fissata alla base tramite piccoli magneti. Spessore 11mm. L’apparec-chio è equipaggiato con 6 LED da 1,2W ad alta resa pilotati a 350mA. I LED sono completi di parabole e di lente 45°. IP40.BREVETTATO.
Hexagonal modular LED system.Fixing base with feeding system. Hexagonal steel cover, matte white or black finish. The cover is fixed to the base with little magnets. Thickness 11mm. 6 LED 1,2W 350mA high emission. 45° beam angle. IP40.PATENTED.
0.25
0.50
0.75
1.00
9168
2292
1019
573
18
36
53
71
h (m) E (lx) D (cm)
applicazioni/applicationsIl fascio ottico estremamente omogeneo rende l’apparecchio idealeper l’impiego all’interno di vetrine gioielleria e profumeria./The light is extremly uniform, Exalight is a perfect luminairesto light jewellery showcases.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MEXA04063500SB
MEXA0406350WSB
MEXA04063500SW
MEXA0406350WSW
colore/colour
cool white*
warm white*
cool white*
warm white*
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
06
06
06
06
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
acciaio/ steel
acciaio/ steel
acciaio/ steel
acciaio/ steel
fascio ottico/beam angle
45°
45°
45°
45°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
IP/IP
40
40
40
40
45°
disegni tecnici/technical drawings
illuminamento/illumination
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
*codice/codenon inclusi/not included
alimentatori/LED drivers
WALIMLED08350
WALIMLED12350
WALIM/DIMM/JOLLY
WBOKVAR
n. faretti/n. spots
caratteristiche/specifications
1
2
2
/
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
*Disponibile in versione neutral white su richiesta. / Neutral white LED on demand.
bianco freddo/cool white
6x1,2WIP40 Ta max 35°C
finitura/finishing
nero/black
nero/black
bianco/white
bianco/white
191
exalight-QCorian®
exalight-Q Corian®
150
12
Sistema modulare a LED a formaquadrata.E’ formato da una base di fissaggio che con-tiene il sistema di alimentazione e da una cover quadrata in Corian® bianco o nero. La cover viene fissata alla base tramite piccoli magneti. Spessore 11mm. L’apparecchio è equipaggia-to con 6 LED da 1,2W ad alta resa pilotati a 350mA. I LED sono completi di parabole e di lente 45°. IP40.
Square modular LED system.Fixing base with feeding system. Square Corian® cover, white or black. The cover is fixed to the base with little magnets. Thickness 11mm. 6 LED 1,2W 350mA high emission. Optic beam 45°. IP40.
0.25
0.50
0.75
1.00
9168
2292
1019
573
18
36
53
71
h (m) E (lx) D (cm)
applicazioni/applications
Il fascio ottico estremamente omogeneo rende l’apparecchio idealeper l’impiego all’interno di vetrine gioielleria e profumeria./The light is extremly uniform, Exalight is a perfect luminairesto light jewellery showcases.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MEXAQ04063500SB
MEXAQ0406350WSB
MEXAQ04063500SW
MEXAQ0406350WSW
colore/colour
cool white*
warm white*
cool white*
warm white*
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
06
06
06
06
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
Corian®
Corian®
Corian®
Corian®
fascio ottico/beam angle
45°
45°
45°
45°
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissaggio/fixing
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
IP/IP
40
40
40
40
45°
disegni tecnici/technical drawings
illuminamento/illumination
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
*codice/codenon inclusi/not included
alimentatori/LED drivers
WALIMLED08350
WALIMLED12350
WALIM/DIMM/JOLLY
WBOKVAR
n. faretti/n. spots
caratteristiche/specifications
1
2
2
/
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
*Disponibile in versione neutral white su richiesta. / Neutral white LED on demand.
bianco freddo/cool white
6x1,2WIP40 Ta max 35°C
finitura/finishing
nero/black
nero/black
bianco/white
bianco/white
interiorinterni
192
Elemento luminoso a LED per interni.Corpo in profilato di alluminio estruso anodizzato di ridotte dimensioni, con testatine di chiusura comple-te di staffette in acciaio orientabili. Disponibile in due versioni: 6 o 12 LED da 1,2W 350mA ad alta resa con ottica orientabile da 110°, montati su circuito di alimentazione per una migliore stabilità. Dissipatore interno in alluminio per ottimizzare la dispersione del calore. Montaggio a sospensione con agganci rapi-di montati sulle staffette laterali. Eccellente Indice di Resa Cromatica (warm white = CRI >90).Alimentatore incluso non a bordo dell’ap-parecchio.
LED lighting fitting for interior use.Anodized aluminum body with small dimensions, with end-caps with adjustable stainless steel brackets. Available in two versions: 6 or 12 LED 1,2W 350mA high emission, with 110° adjustable beam angle. Internal aluminum dissipator to optimize heat dissipation. Suspension mounting with fast device installed on the lateral brackets. Excellent Colour Rendering Index (warm white = CRI >90).Remote LED driver included.
disegni tecnici/technical drawings
illuminamento/illumination
0.25
0.50
0.75
1.00
2240
560
240
140
/
/
/
/
h (m) E (lx) D (cm)
110°
bookled 01alluminio anodizzato
bookled 01 anodized aluminum
d
applicazioni/applicationsIlluminazione di quadri, superfici, ambienti./Artwork lighting, surfaces, environments, bookshelves.
600/1200
23
28
50 100
200
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BBOK03060300AA
BBOK0306030WAA
BBOK03120300AA
BBOK0312030WAA
colore/colour
cool white
warm white
cool white
warm white
tipo/type
interni/interiorL=60 cm
interni/interiorL=60 cm
interni/interiorL=120 cm
interni/interiorL=120 cm
LED/LED
06
06
12
12
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
fascio ottico/beam angle
110°
110°
110°
110°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
a sospensione/suspension
a sospensione/suspension
a sospensione/suspension
a sospensione/suspension
IP/IP
40
40
40
40
bianco freddo/cool white
6x1,2W12x1,2W Ta max 35°CIP40
193
Elemento luminoso a LED per interni.Corpo in profilato di alluminio estruso anodizzato di ridotte dimensioni, con testatine di chiusura complete di staffette di fissaggio in acciaio orien-tabili. Disponibile in due versioni: 6 o 12 LED da 1,2W 350mA ad alta resa con ottica orientabile da 110°, montati su circuito di alimentazione per una migliore stabilità. Dissipatore interno in allu-minio per ottimizzare la dispersione del calore. Montaggio a parete o plafone. Eccellente Indice di Resa Cromatica (warm white = CRI >90).Alimentatore incluso non a bordo dell’apparecchio.
LED Lighting fitting for interior use.Anodized aluminum body with small dimensions, with end-caps complete with adjustable stainless steel brackets. Available in two versions: 6 or 12 LED 1,2W 350mA with high emission, with 110° adjustable beam angle. Internal aluminum dissipator to optimize heat dissipation. Wall or ceiling mounting. Excellent Colour Rendering Index (warm white = CRI >90).Remote LED driver included.
disegni tecnici/technical drawings
illuminamento/illumination
0.25
0.50
0.75
1.00
2240
560
240
140
/
/
/
/
h (m) E (lx) D (cm)
110°
bookled 02alluminio anodizzato
bookled 02 anodized aluminum
d
applicazioni/applicationsIlluminazione di quadri, superfici, vetrine./Artwork lighting, surfaces, showcases.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BBOK04060300AA
BBOK0406030WAA
BBOK04120300AA
BBOK0412030WAA
colore/colour
cool white
warm white
cool white
warm white
tipo/type
interni/interiorL=60 cm
interni/interiorL=60 cm
interni/interiorL=120 cm
interni/interiorL=120 cm
LED/LED
06
06
12
12
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
fascio ottico/beam angle
110°
110°
110°
110°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
parete/ plafone/wall/ ceiling
parete/ plafone/wall/ ceiling
parete/ plafone/wall/ ceiling
parete/ plafone/wall/ ceiling
IP/IP
40
40
40
40
600/120028
50 100
materiale/material
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
bianco freddo/cool white
Ta max 35°C6x1,2W12x1,2WIP40
interiorinterni
Elemento luminoso a LED per interni/esterni.Corpo in profilo di alluminio anodizzato di ridotte dimensioni, con elementi stabilizzanti, inserito in un cilindro di policarbonato trasparente diam. 4 cm con chiusure stagne per un grado di protezione IP65, contro l’infiltrazione di polvere e di acqua. Disponi-bile in due versioni: 6 o 12 LED da 1,2W 350mA ad alta resa con ottica orientabile da 110°, montati su circuito di alimentazione per una migliore stabili-tà. Dissipatore interno in alluminio per ottimizzare la dispersione del calore. Montaggio a parete/plafone, orientabile, con staffe di acciaio inox predisposte per il fissaggio con vite passante. Alimentatore incluso non a bordo dell’apparecchio.
LED Lighting fitting for interior/outdoor use.Anodized aluminum body with small dimensions, fitted in a clear polycarbonate tube ø 4cm, with IP65 tight end-caps, against dust and water ingress. Available in two versions: 6 or 12 LED 1,2W 350mA with high emission, with 110° adjustable beam angle. Internal aluminum dissipator to optimize the heat dissipation. Wall or ceiling mounting, adjustable through stainless steel brackets. Remote LED driver included.
disegni tecnici/technical drawings
illuminamento/illumination
0.25
0.50
0.75
1.00
2240
560
240
140
/
/
/
/
h (m) E (lx) D (cm)
110°
bookled 03alluminio e policarbonato
bookled 03 aluminum and polycarbonate
d
applicazioni/applicationsIlluminazione di facciata, zone di passaggio interno-esterno./Façade lighting, interior-outdoor paths.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BBOK09060300PC
BBOK0906030WPC
BBOK09120300PC
BBOK0912030WPC
colore/colour
cool white
warm white
cool white
warm white
tipo/type
interni/esterni L=70 cminterior/outdoor L=70 cm
interni/esterni L=70 cminterior/outdoor L=70 cm
interni/esterni L=130 cminterior/outdoor L=130 cm
interni/esterni L=130 cminterior/outdoor L=130 cm
LED/LED
06
06
12
12
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/ policarbonato/ aluminum/ polycarbonate
alluminio/ policarbonato/ aluminum/ polycarbonate
alluminio/ policarbonato/ aluminum/ polycarbonate
alluminio/ policarbonato/ aluminum/ polycarbonate
fascio ottico/beam angle
110°
110°
110°
110°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
IP/IP
65
65
65
65
670/1270
696/1296
500/1000
40 42
55
bianco freddo/cool white
194
Ta min -20°CTa max 35°C6x1,2W12x1,2WIP65
195
colore/colour
cool white
warm white
cool white
warm white
tipo/type
interni/esterni L=70 cminterior/outdoor L=70 cm
interni/esterni L=70 cminterior/outdoor L=70 cm
interni/esterni L=130 cminterior/outdoor L=130 cm
interni/esterni L=130 cminterior/outdoor L=130 cm
LED/LED
06
06
12
12
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/ policarbonato/ aluminum/ polycarbonate
alluminio/ policarbonato/ aluminum/ polycarbonate
alluminio/ policarbonato/ aluminum/ polycarbonate
alluminio/ policarbonato/ aluminum/ polycarbonate
fascio ottico/beam angle
25°
25°
25°
25°
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
IP/IP
65
65
65
65
Elemento luminoso a LED per interni/esterni.Corpo in profilo di alluminio anodizzato di ridotte dimensioni, con elementi stabilizzanti, inserito in un cilindro di policarbonato trasparente diam. 4cm con chiusure stagne per un grado di protezione IP65, contro l’infiltrazione di polvere e di acqua. Disponi-bile in due versioni: 6 o 12 LED da 1,2W 350mA ad alta resa con lente da 25°, montati su circuito di alimentazione per una migliore stabilità. Dissipato-re interno in alluminio per ottimizzare la dispersione del calore. Montaggio a parete/plafone, orientabile, con staffe di acciaio inox predisposte per il fissaggio con vite passante. Alimentatore incluso non a bordo dell’apparecchio.
LED light fitting for interior/outdoor use.Anodized aluminum body of small dimensions with stabilized elements, fit in a clear polycarbonate tube of ø 4cm. IP65 against dust and water ingress. Available in two versions with 6 or 12 LED 1,2W 350mA high emission with 25° beam angle. Internal aluminum dissipator for optimal heat dissipation.Wall/ceiling mounting, adjustable with stainless steel brackets. Remote LED driver included.
disegni tecnici/technical drawings
illuminamento/illumination
0.50
1.00
1.50
2.00
3000
750
330
185
30
45
60
80
h (m) E (lx) D (cm)
25°
bookled 04alluminio e policarbonato
bookled 04 aluminum and polycarbonate
d
applicazioni/applicationsIlluminazione di facciata, zone di passaggio interno-esterno./Façade lighting, interior-outdoor paths.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BBOK09064300PC
BBOK0906430WPC
BBOK09124300PC
BBOK0912430WPC
640/1240
666/1266
500/1000
40 42
55
bianco freddo/cool white
Ta min -20°CTa max 35°C6x1,2W12x1,2WIP65
outdooresterni
196
bookled HPalluminio e policarbonato
bookled HPaluminum and polycarbonate
Elemento luminoso a LEDper interni/esterni.Corpo in profilo di alluminio anodizzato di ridot-te dimensioni, con elementi stabilizzanti, inserito in un cilindro di policarbonato satinato ø4 cm con chiusure stagne per un grado di protezione IP65, contro l’infiltrazione di polvere e di acqua. Sorgente costituita da nastro LED 24V DC alta emissione (warm white o neutral white) monta-to su circuito di alimentazione per una migliore stabilità. Dissipatore interno in alluminio per ot-timizzare la dispersione del calore. Montaggio a parete/plafone, orientabile, con staffe di ac-ciaio inox predisposte per il fissaggio con vite passante. Alimentatore 24V DC incluso a bordo dell’apparecchio.
LED light fitting for interior/outdoor use.Anodized aluminum body with small dimensions, fitted in a sanded polycarbonate tube ø4 cm with IP65 end-caps, against dust and water ingress. LED strip 24V DC high emission (warm white or neutral white). Internal aluminum dissipator to optimize heat dissipation. Wall or ceiling mounting, adjustable through stainless steel brackets. Built-in LED driver 24V DC included.
disegni tecnici/technical drawings
600/1200
40
55
42
illuminamento/illumination
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
800
200
89
50
115
229
344
458
bianco freddo/cool white
Ta max 35°CIP65 Ta min -20°C 230V
197
applicazioni/applicationsIlluminazione di facciata, zone di passaggio interno-esterno./Façade lighting, interior-outdoor paths.
codice/code
BBOK09060005NPO
BBOK09120005NPO
BBOK09060005WPO
BBOK09120005WPO
colore/colour
neutral white
neutral white
warm white
warm white
tipo/type
interni/ esterni/
interior/ outdoor
L=60cm
interni/ esterni/
interior/ outdoor
L=120cm
interni/ esterni/
interior/ outdoor
L=60cm
interni/ esterni/
interior/ outdoor
L=120cm
tipo di LED/LED type
nastro LED alta emissione/
high emission LED strip
nastro LED alta emissione/
high emission LED strip
nastro LED alta emissione/
high emission LED strip
nastro LED alta emissione/
high emission LED strip
materiale/material
alluminio/ policarbonto/
aluminum/ polycarbonate
alluminio/ policarbonto/
aluminum/ polycarbonate
alluminio/ policarbonto/
aluminum/ polycarbonate
alluminio/ policarbonto/
aluminum/ polycarbonate
potenza/power
12W
20W
12W
20W
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fascio ottico/beam angle
asimmetrico/
asymmetric
asimmetrico/
asymmetric
asimmetrico/
asymmetric
asimmetrico/
asymmetric
fissaggio/fixing
tramite staffe/
with brackets
tramite staffe/
with brackets
tramite staffe/
with brackets
tramite staffe/
with brackets
IP/IP
65
65
65
65
prodotto/product
tabella di riepilogo prodotti
outdooresterni
198
disegni tecnici/technical drawings
minifluxpolicarbonato
miniflux polycarbonate
accessori/accessoriesBBOKGIUNTO - Giunto di connessione per linea continua (non incluso pag.339) immagine1
Connection joint for linear mounting (not included p.339) image 1
BBOKALIMPG7 - Alimentazione con pressacavo PG7 (non inclusa pag.339) immagine 2PG7 feeding (not included p.339) image 2
BBOKTAPPO - Tappo di chiusura (non incluso pag.339) immagine 3End-cap (not included p.339) image 3
1 2 3
Sistema a LED modulareper interni/esterni.Struttura in profilato di alluminio su cui è posi-zionata una striscia di LED 12V a media emis-sione. Diffusore in policarbonato trasparente diam.1,6cm completa di staffe di fissaggio in policarbonato trasparente. L=105, 205, 305cm. I LED possono essere cool white, warm white oppure colorati. Il sistema si completa di tappo di alimentazione e tappo terminale. IP65. Ali-mentatore escluso. IK08. Collegamento in il linea continua max 10m.
Modular LED systemfor interior/outdoor use.Aluminum structure with a LED strip 12V medium emission. Clear polycarbonate tube ø 1,6cm with fixing brackets in clear polycarbonate. Miniflux can be supplied in the following lengths: L=105, 205, 305cm. LED can be cool white, warm white or coloured. The system is supplied with feeding cap and end cap. IP65. LED driver not included. IK08. For linear connection max 10m.
Ta max 35°CIP65
ø16 ø17
231050/2050/3050
Ta min -20°C
illuminamento/illumination200 lm/m
199
applicazioni/applicationsSegnalazione di percorsi e superfici./Path marking, cove lighting and graze lighting.
prodotto/product
codice/code
BBOK09600060PC
BBOK09120060PC
BBOK09180060PC
BBOK0960006WPC
BBOK0912006WPC
BBOK0918006WPC
BBOK09600061PC
BBOK09120061PC
BBOK09180061PC
BBOK09600062PC
BBOK09120062PC
BBOK09180062PC
BBOK09600063PC
BBOK09120063PC
BBOK09180063PC
BBOK09600064PC
BBOK09120064PC
BBOK09180064PC
colore/colour
cool white
cool white
cool white
warm white
warm white
warm white
blu/blue
blu/blue
blu/blue
verde/green
verde/green
verde/green
ambra/amber
ambra/amber
ambra/amber
rosso/red
rosso/red
rosso/red
tipo/type
interni/esterni / interior/outdoorL=105 cm
interni/esterni / interior/outdoorL=205 cm
interni/esterni / interior/outdoorL=305 cm
interni/esterni / interior/outdoorL=105 cm
interni/esterni / interior/outdoorL=205 cm
interni/esterni / interior/outdoorL=305 cm
interni/esterni / interior/outdoorL=105 cm
interni/esterni / interior/outdoorL=205 cm
interni/esterni / interior/outdoorL=305 cm
interni/esterni / interior/outdoorL=105 cm
interni/esterni / interior/outdoorL=205 cm
interni/esterni / interior/outdoorL=305 cm
interni/esterni / interior/outdoorL=105 cm
interni/esterni / interior/outdoorL=205 cm
interni/esterni / interior/outdoorL=305 cm
interni/esterni / interior/outdoorL=105 cm
interni/esterni / interior/outdoorL=205 cm
interni/esterni / interior/outdoorL=305 cm
potenza/power
4,5 W
9 W
13,5 W
4,5 W
9 W
13,5 W
4,5 W
9 W
13,5 W
4,5 W
9 W
13,5 W
4,5 W
9 W
13,5 W
4,5 W
9 W
13,5 W
tipo di LED/LED type
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
materiale/material
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
policarbonato/polycarbonate
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
IP/IP
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
*Esempio schemi di collegamento a p.347/ Example of wiring diagram on p.347
tabella di riepilogo prodotti/ product overview table
*codice/codenon inclusi/not included
*codice/codenon inclusi/not included
caratteristiche/specifications
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
WALIM/DIMM/JOLLY
WBOKVAR
WBOKOTDIM
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
10W - 12V - 103x67x21 (h) - dimm.
variatore/dimmer 1- 10V
dimmer (50W max ) necessita di alimentatore/ needs driver
outdooresterni
200
miniflux RGBpolicarbonato
miniflux RGB polycarbonate
Sistema a LED modulareper interni/esterni. Struttura in profilato di alluminio su cui è posi-zionata una striscia di LED 12V a media emis-sione. Diffusore in policarbonato trasparente diam.1,6cm completa di staffe di fissaggio in policarbonato trasparente. L=105, 205, 305cm. I LED cambiano colore in sequenza manuale o automatica e possono essere fermati su un co-lore a scelta. Il sistema si completa di tappo di alimentazione e tappo terminale. IP65. Alimen-tatore escluso. IK08.Non previsto per effetti con luce bianca.Collegamento in linea continua max 10m.
Modular LED systemfor interior/outdoor use. Aluminum structure with a LED strip 12V medium emission. Clear polycarbonate tube ø 1,6cm with fixing brackets in clear polycarbonate. Miniflux RGB can be supplied in the following lengths: 105, 205, 305cm. LED can change colours in manual or automatic sequence and can be stopped on a colour. The system is supplied with feeding cap, and end cap. IP65. LED driver not included. IK08.For linear connection max 10m.
disegni tecnici/technical drawings
Ta max 35°CRGBIP65
ø16 ø17
231050/2050/3050
1 2
Ta min -20°C
accessori/accessoriesBBOKGIUNTO-RGB - Giunto di connessione RGB per linea continua (non incluso pag.339) immagine1
RGB connection joint for linear mounting (not included p.339) image 1
BBOKALIMPG7-RGB - Alimentazione RGB con pressacavo PG7 (non inclusa pag.339) immagine 2RGB PG7 feeding (not included p.339) image 2
BBOKTAPPO - Tappo di chiusura (non incluso pag.339) immagine 3End-cap (not included p.339) image 3
3
201
applicazioni/applicationsIlluminazione decorativa.Segnalazione di percorsi e superfici./Decorative lighting.Path marking, cove lighting and graze lighting.
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
caratteristiche/specifications
caratteristiche/specifications
WBOKOTDIM
WBOKVAR
WBOKSEQUENCER
WBOKVAR
Dimmer colormix (50W max)
Variatore colormix/ Dimmer colormix
Sequencer colormix (60W max)
Variatore di velocità/ Speed dimmer
controllo manuale RGB/ RGB manual control
controllo automatico RGB/ RGB automatic control
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
codice/code non inclusi/not included
Slave DMX
Master DMX
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
caratteristiche/specifications
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX12/24V
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX 12/24V (max. 10m)
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
!
*Esempio schemi di collegamento a p.352-357
Example of wiring diagram on p.352-357
outdoor / decorativeesterni / decorativo
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BBOK09600065PC
BBOK09120065PC
BBOK09180065PC
colore/colour
RGB
RGB
RGB
tipo/type
interni/esterni / interior/outdoorL=105 cm
interni/esterni / interior/outdoorL=205 cm
interni/esterni / interior/outdoorL=305 cm
potenza/power
7,5W
15W
22,5W
IP/IP
65
65
65
tipo di LED/LED type
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
nastro a media emissione/medium emission strip
materiale/material
policarbonato/ polycarbonate
policarbonato/ polycarbonate
policarbonato/ polycarbonate
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
accessori/accessories
telecomando/remote control
telecomando/remote control
telecomando/remote control
202
miniflux HPpolicarbonato
miniflux HP polycarbonate
disegni tecnici/technical drawings
Sistema a LED modulareper interni/esterni. Corpo in profilato in alluminio su cui è posizio-nata una striscia di Nastro LED 24V DC ad alta emissione. Diffusore in policarbonato traspa-rente diam.1,6cm. Fissaggio con staffe in po-licarbonato trasparente. Lunghezze 103, 201, 305cm. Ottica orientabile. IP65. IK08. Il sistema si completa di tappo di alimentazione e tappo terminale inclusi. Alimentatore escluso.Emissione luminosa: circa 800 lm/m.Collegamento in linea continua max 6mt.
Modular LED systemfor interior/outdoor use. Aluminum profile. Clear polycarbonate diffuser. Transparent polycarbonate brackets for fixation. Miniflux can be supplied in the following lenghts: 103, 201, 305cm. Adjustable optic. High emission LED strip 24V DC. IP65. IK08. Feeding cap and end cap included. LED driver not included. Luminous flux: approximately 800 lm/m. Max 6 meters in line.
illuminamento/illumination
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
800
200
89
50
115
229
344
458
Ta max 35°CIP65
bianco neutro/neutral white
ø16 ø17
231030/2010/3050
Ta min -20°C
1
accessori/accessoriesBBOKGIUNTO - Giunto di connessione per linea continua (non incluso pag.339) immagine1
Connection joint for linear mounting (not included p.339) image 1
BBOKALIMPG7 - Alimentazione con pressacavo PG7 (non inclusa pag.339) immagine 2PG7 feeding (not included p.339) image 2
BBOKTAPPO - Tappo di chiusura (non incluso pag.339) immagine 3End-cap (not included p.339) image 3
1 2 3
203
applicazioni/applicationsPer sbaffi di luce in velette, illuminazione di nicchie, illuminazione di accento, banconi e locali pubblici./Decorative lighting, cove lighting, graze lighting, accent lighting, hospitality lighting.
*Esempio schemi di collegamento a p.348
Example of wiring diagram on p.348
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED20/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIM/DIMM/JOLLY
WBOKVAR
WBOKOTDIM
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
20W - 24V - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
dimmer (120W max ) necessita di alimentatore/ needs driver
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BBOK0960005NPC
BBOK0912005NPC
BBOK0918005NPC
BBOK0960005WPC
BBOK0912005WPC
BBOK0918005WPC
colore/colour
neutral white
neutral white
neutral white
warm white
warm white
warm white
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
policarbonato/
polycarbonate
policarbonato/
polycarbonate
policarbonato/
polycarbonate
policarbonato/
polycarbonate
policarbonato/
polycarbonate
policarbonato/
polycarbonate
potenzapower
L=103cm
16W
L=201cm
32W
L=305cm
48W
L=103cm
16W
L=201cm
32W
L=305cm
48W
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
con staffa/ with brackets
con staffa/ with brackets
con staffa/ with brackets
con staffa/ with brackets
con staffa/ with brackets
con staffa/ with brackets
IP/IP
65
65
65
65
65
65
outdooresterni
204
miniflux HP RGBpolicarbonato
miniflux HP RGB polycarbonate
disegni tecnici/technical drawings
Sistema a LED modulareper interni/esterni. Corpo in profilato in alluminio su cui è posizio-nata una striscia di Nastro LED RGB 24V DC ad alta emissione. Diffusore in policarbonato trasparente diam.1,6cm. Fissaggio con staffe in policarbonato trasparente. Lunghezze 103, 201, 305cm. Ottica orientabile. IP65. Il sistema si completa di tappo di alimentazione e tappo terminale inclusi. Alimentatore escluso. IK08.Non previsto per effetti con luce bianca.Collegamento in linea continua max 6m.
Modular LED systemfor interior/outdoor use. Aluminum profile. Clear polycarbonate diffuser. Transparent polycarbonate brackets for fixation. Miniflux can be supplied in the following lenghts: 103, 201, 305cm. Adjustable optic. High emission RGB LED strip 24V DC. IP65. Feeding cap and end cap included. LED driver not included. IK08.For linear connection max 6m.
Ta max 35°CRGBIP65
1
Ta min -20°C
1 2
accessori/accessoriesBBOKGIUNTO-RGB - Giunto di connessione RGB per linea continua (non incluso pag.339) immagine1
RGB connection joint for linear mounting (not included p.339) image 1
BBOKALIMPG7-RGB - Alimentazione RGB con pressacavo PG7 (non inclusa pag.339) immagine 2RGB PG7 feeding (not included p.339) image 2
BBOKTAPPO - Tappo di chiusura (non incluso pag.339) immagine 3End-cap (not included p.339) image 3
3
ø16 ø17
231030/2010/3050
205
*Esempio schemi di collegamento a p.353-357
Example of wiring diagram on p.353-357
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
codice/code non inclusi/not included
codice/code non inclusi/not included
caratteristiche/specifications
caratteristiche/specifications
WBOKOTDIM
WBOKVAR
WBOKSEQUENCER
WBOKVAR
Dimmer colormix (120W max)
Variatore colormix/ Dimmer colormix
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
codice/code non inclusi/not included
Slave DMX
Master DMX
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
caratteristiche/specifications
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX12/24V
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX 12/24V (max. 5m)
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
!
applicazioni/applicationsPer sbaffi di luce in velette, illuminazione di nicchie, illuminazione di accento, banconi e locali pubblici./Decorative lighting, cove lighting, graze lighting, accent lighting, hospitality lighting.
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 109x50x35 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
controllo manuale RGB/ RGB manual control
controllo automatico RGB/ RGB automatic control
controllo RGB-DMX/controller RGB-DMX
Sequencer colormix (60W max)
Variatore di velocità/ Speed dimmer
outdoor / decorativeesterni / decorativo
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BBOK09600055PC
BBOK09120055PC
BBOK09180055PC
colore/colour
RGB
RGB
RGB
tipo/type
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
potenza/power
L=103cm16W
L=201cm32W
L=305cm48W
materiale/material
policarbonato/ polycarbonate
policarbonato/ polycarbonate
policarbonato/ polycarbonate
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
IP/IP
65
65
65
accessori/accessories
telecomando/remote control
telecomando/remote control
telecomando/remote control
LED/LED
nastro LED RGBRGB LED strp
nastro LED RGBRGB LED strp
nastro LED RGBRGB LED strp
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
206
miniflux twin LEDpolicarbonato
miniflux twin LED polycarbonate
disegni tecnici/technical drawings
Sistema a LED modulareper interni/esterni. Struttura in profilato in alluminio. Diffusore in policarbonato trasparente diam.1,6cm. La sor-gente è costituita da moduli LED ad alta emis-sione con temperatura colore variabile da cool a warm white (da 3.000°K a 8.000°K), miscelabile e dimmerabile. L’indice di resa cromatica (CRI) è >90. Alimentazione 24V DC. Dimmerabile 1...10V (necessita di 2 canali) o con Consolle DMX. Assorbimento: circa 9W al metro. Fis-saggio con staffe in policarbonato trasparente. Lunghezze 101,197, 293cm. Ottica orientabile. IP65. Il sistema si completa di tappo di alimen-tazione e tappo terminale inclusi. Alimentatore escluso.Collegamento in parallelo.
Modular LED systemfor interior/outdoor use. Structure in aluminum profile. Clear polycarbonate diffuser. With modular LED high emission in variable color temperature from cool white to warm white (3.000°K/8.000°K), turnable and dimmable. Color Rendering Index >90. Power supply 24V DC. Dimmable 1...10V (2 channels) or with DMX Consolle. Power consumption: about 9W/mt. Transparent polycarbonate brackets for fixation. Lenght 101,197, 293cm. Adjustable optic. IP65. Feeding cap and end cap included. LED driver not included.Parallel connection.
Ta max 35°CIP65
illuminamento/illumination450 lm/m
ø16 ø17
231010/1970/2930
Ta min -20°C
207
codice/code non inclusi/not included
Controllo manuale c/w / manual c/w controller
caratteristiche/specifications
WBOKOTDIM
WBOKVAR
dimmer cool/warm white(120W max)
variatore/ dimmer 1-10V
controllo cool/warm white/controller cool/warm white
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BBOK0908060EPC
BBOK0916060EPC
BBOK0924060EPC
colore/colour
warm whitecool white
warm whitecool white
warm whitecool white
tipo/type
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
potenza/power
L=101cm10W
L=197cm20W
L=293cm30W
materiale/material
policarbonato/ polycarbonate
policarbonato/ polycarbonate
policarbonato/ polycarbonate
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
fissaggio/fixing
tramite staffe/with brackets
tramite staffe/with brackets
tramite staffe/with brackets
LED/LED
nastro LEDLED strp
nastro LEDLED strp
nastro LEDLED strp
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
applicazioni/applicationsPer sbaffi di luce in velette, illuminazione di nicchie, illuminazione di accento, banconi, locali pubblici e vetrine./Decorative lighting, cove lighting, graze lighting, accent lighting, hospitality lighting and showcases.
*Esempio schemi di collegamento a p.349-357
Example of wiring diagram on p.349-357
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
codice/code non inclusi/not included
Slave DMX
Master DMX
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
caratteristiche/specifications
WCOLORWHEELCT
WALIMCOLORWHEEL
WSLAVEDMX12/24V
QDMX512/CABLE-A
QDMX512/CABLE-B
Master DMX CT
Alimentatore per WCOLORWHEELCT
(obbligatorio)/
Feeder for WCOLORWHEELCT
(strictly necessary)
Slave DMX 12/24V (max. 6m)
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
!
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 109x50x35 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
controllo DMX/controller DMX
outdooresterni
IP/IP
65
65
65
208
camaled systemalluminio anodizzato
camaled system anodized aluminum
Sistema modulare a LED per interni.Corpo in profilo di alluminio anodizzato estruso. I profili hanno una lunghezza di 101, 197, 293 cm. La sorgente è costituita da moduli LED ad alta emissione con temperatura colore variabile da cool a warm white (da 3.000°K a 8.000°K), miscelabile e dimmerabile. L’indice di resa cro-matica (CRI) è >90. Alimentazione 24V DC. Il sistema è disponibile con due diverse soluzioni: con schermo satinato oppure con lente lineare concentrante che restringe il fascio luminoso e ne aumenta la resa. Dimmerabile 1...10V (ne-cessita di 2 canali) o con Consolle DMX. Assor-bimento: circa 9W al metro.Collegamento in parallelo.
Modular LED system for interior use.Body in anodized aluminum. Profiles are 101, 197, 293cm long. With modular LED high emission in variable color temperature from cool white to warm white (3.000°K/8.000°K), turnable and dimmable. Color Rendering Index >90. Power supply 24V DC. Two version are available: with sanded screen or with focusing linear lens that narrows the optic beam. Dimmable 1...10V (2 channels) or with DMX Consolle. Power consumption: 9W/mt.Parallel connection.
disegni tecnici/technical drawings
illuminamento/illumination450 lm/m
1010/1970/2930 12 12
IP40 Ta max 35°C
209
codice/code
BCAM0908P60EAA
BCAM0916P60EAA
BCAM0924P60EAA
BCAM0908660EAA
BCAM0916660EAA
BCAM0924660EAA
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/
interior
interni/
interior
interni/
interior
interni/
interior
interni/
interior
interni/
interior
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/ schermo satinato/
aluminum/ sanded screen
alluminio/ schermo satinato/
aluminum/ sanded screen
alluminio/ schermo satinato/
aluminum/ sanded screen
alluminio/ lente lineare concentrante/
aluminum/ focusing linear lens
alluminio/ lente lineare concentrante/
aluminum/ focusing linear lens
alluminio/ lente lineare concentrante/
aluminum/ focusing linear lens
potenza/power
L=101cm/
10W
L=197cm/
20W
L=293cm/
30W
L=101cm/
10W
L=197cm/
20W
L=293cm/
30W
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
LED/LED
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
fissaggio/fixing
tramite viti/
with screws
tramite viti/
with screws
tramite viti/
with screws
tramite viti/
with screws
tramite viti/
with screws
tramite viti/
with screws
IP/IP
40
40
40
40
40
40
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code non inclusi/not included
Controllo manuale c/w / manual c/w controller
caratteristiche/specifications
WBOKOTDIM
WBOKVAR
controllo cool/warm white/controller cool/warm white
*Esempio schemi di collegamento a p.349-357
Example of wiring diagram on p.349-357
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
codice/code non inclusi/not included
Slave DMX
Master DMX
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
caratteristiche/specifications
WCOLORWHEELCT
WALIMCOLORWHEEL
WSLAVEDMX12/24V
QDMX512/CABLE-A
QDMX512/CABLE-B
Master DMX CT
Alimentatore per WCOLORWHEELCT
(obbligatorio)/
Feeder for WCOLORWHEELCT
(strictly necessary)
Slave DMX 12/24V (max. 6m)
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
!
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 109x50x35 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
applicazioni/applicationsPer sbaffi di luce in velette, illuminazione di nicchie, illuminazione di accento, banconi, locali pubblici e vetrine./Decorative lighting, cove lighting, graze lighting, accent lighting, hospitality lighting and showcases.
*Limmagine è puramente indicativa: applicazione speciale./The picture is purelly indicative: special application.
dimmer cool/warm white(120W max)
variatore/ dimmer 1-10V
controllo DMX/controller DMX
interiorinterni
210
Lampada da esternoad emissione direzionale. Struttura cilindrica in policarbonato trasparente. Dotata di profilo in alluminio con 6 LED 1,2W 350mA ad alta resa. Può essere realizzata nelle stesse versioni di quella fluorescente, ovvero, con finitura alluminio e base flessibile. Diffusore con o senza lamelle orientabili. Colore grigio.Alimentatore incluso non a bordo dell’apparecchio.
LED lamp for outdoor usewith adjustable light pattern.Clear polycarbonate. 6 LED 1,2W 350mA high emission. It can be in aluminum finish with flexible base. Available with or without adjustable frames. Grey colour.Remote LED driver included.
disegni tecnici/technical drawings
flexus LED design Studio Metispolicarbonato e alluminio
flexus LED polycarbonate and aluminum
applicazioni/applicationsSegnalazione di percorsi, giardini./Path marking, gardens.
340
180
1000
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MFLEB4060300SILY
colore/colour
cool white*
tipo/type
esterni/
outdoor
LED/LED
06
tipo di LED/LED type
alta emissione/
high emission
materiale/material
policarbonato*/ alluminio/
polycarbonate*/ aluminum
ottica/optic
fissa/
fixed
accessori/accessories
pozzetto/
well
IP/IP
65
fissaggio/fixing
con base/
with base
accessori/accessoriesPozzetto (non incluso p.335)
Well (not included p.335)
*Disponibile con LED a luce colorata e/o con policarbonato satinato. / Coloured LED and/or with sanded polycarbonate.
6x1,2W Ta max 35°CIP65 Ta min -20°C
outdooresterni
212
velis LEDvetro e alluminio
velis LED glass and aluminum
Apparecchio per illuminazione a LED per interni/esterniCorpo in profilato di alluminio estruso con guar-nizioni stabilizzanti, inserito in un cilindro di ve-tro borosilicato trasparente diam. 6,5cm con chiusure stagne. 3/6/9/12 gruppi di 3 LED da 1,2W 350mA cablati su circuito per una migliore stabilità, con piastra di dissipazione in alluminio, per ottimizzare la dispersione del calore. Ogni gruppo di LED è dotato di un ottica formata da una lente a tre comparti con fascio ottico da 25°. Montaggio a parete/plafone/sospensione, orientabile. Alimentatori e accessori (esclusi) non a bordo dell’apparecchio. Disponibile in 4 differenti lunghezze e potenze. IP65.Alimentazione 24V DC.Collegamento in parallelo.
LED luminaire for interior/outdoor use.Interior body in aluminum with gaskets, clear glass ø 6,5cm. 3/6/9/12 set of 3 LED 1,2W 350mA with an aluminum dissipation plate for optimal heat dissipation. Each set of LED is equipped with a lens with 25° beam angle. Wall/ceiling/suspension mounting, adjustable. Remote LED driver. Available in 4 different lengths and power. IP65.24V DC feeding.Parallel connection.
disegni tecnici/technical drawings
accessori/accessoriesStaffe Velis/ Velis brackets (non incluse/ not included p.338)
OVE-CAVO1+STAF /OVE-PLAF+STAF /OVE-STAFPAR /OVE-ANG+STAF
illuminamento/illumination
0.50
1.00
1.50
2.00
0.50
1.00
1.50
2.00
0.50
1.00
1.50
2.00
0.50
1.00
1.50
2.00
7340
2300
1220
650
7490
3240
1800
1100
7850
3510
2180
1450
11300
4460
2610
1750
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
h (m) h (m) h (m) h (m)E (lx) E (lx) E (lx) E (lx)D (cm) D (cm) D (cm) D (cm)
25°d
IP65
935
1235 335ø65
635
960
1260 360
660
bianco freddo/cool white
Velis L=36cm Velis L=66cm Velis L=96cm Velis L=126cm
Ta max 35°C9x1,2W18x1,2W 36x1,2W
27x1,2W Ta min -20°C
213
*Esempio schemi di collegamento a p.350
Example of wiring diagram on p.350
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
applicazioni/applicationsIlluminazione di ambienti, facciate e d’effetto./Interior - outdoor lighting effects.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BVEL09090300TR
BVEL0909030WTR
BVEL09180300TR
BVEL0918030WTR
BVEL09270300TR
BVEL0927030WTR
BVEL09360300TR
BVEL0936030WTR
colore/colour
cool white*
warm white*
cool white*
warm white*
cool white*
warm white*
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
09
09
18
18
27
27
36
36
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fascio ottico/beam angle
25°*
25°*
25°*
25°*
25°*
25°*
25°*
25°*
fissaggio/fixing staffe
brakets
staffe
brakets
staffe
brakets
staffe
brakets
staffe
brakets
staffe
brakets
staffe
brakets
staffe
brakets
accessori/accessories
staffe velis/
velis brackets
staffe velis/
velis brackets
staffe velis/
velis brackets
staffe velis/
velis brackets
staffe velis/
velis brackets
staffe velis/
velis brackets
staffe velis/
velis brackets
staffe velis/
velis brackets
assorbimento/powerconsumption
12W
12W
24W
24W
36W
36W
48W
48W
IP/IP
65
65
65
65
65
65
65
65
*Disponibile con LED a luce colorata e/o con lente da 10° o 40° su richiesta. / Coloured LED and/or with 10 or 40° lens on demand.
outdooresterni
214
velis LED RGBvetro e alluminio
velis LED RGB glass and aluminum
Apparecchio LED RGBper interni/esterni. Corpo in profilato di alluminio estruso con guar-nizioni stabilizzanti, inserito in un cilindro di vetro borosilicato trasparente ø 6,5cm con chiusure stagne. 3/6/9/12 gruppi di 3 LED RGB da 1W 350mA cablati su circuito per una migliore sta-bilità, con piastra di dissipazione in alluminio, per ottimizzare la dispersione del calore. Ogni gruppo di LED è dotato di ottica formata da 1 lente a tre comparti con fascio ottico da 25°. Grazie al sistema di controllo dinamico della luce, è possibile ottenere effetti luce cromatici gestibili in modalità manuale o automatica, per decidere sia la sequenza colore che il blocco su uno a scelta, anche con telecomando. Montag-gio a parete/plafone/sospensione, orientabile. Alimentatori e accessori (esclusi) non a bordo dell’apparecchio. Disponibile in 4 differenti lun-ghezze e potenze. IP65.
RGB LED luminairefor interior/outdoor use.Internal body in aluminum with gaskets, clear glass ø 6,5cm. 3/6/9/12 set of 3 RGB LED 1W 350mA with an aluminum dissipation plate for optimal heat dissipation. Each set of LED is equipped with a lens with optic beam of 25°. Thanks to the light control, you can get light effects manually or automatically with a remote control. Wall/ceiling/suspension mounting, adjustable. Remote LED driver not included. Available in 4 different lengths and power. IP65.
fascio ottico/beam angle
25°d
disegni tecnici/technical drawings
935
1235 335ø65
635
960
1260 360
660
IP65
accessori/accessoriesStaffe Velis/ Velis brackets (non incluse/ not included p.338)
OVE-CAVO1+STAF /OVE-PLAF+STAF /OVE-STAFPAR /OVE-ANG+STAF
Ta min -20°CTa max 35°CRGB9x1W18x1W 36x1W
27x1W
215
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BVEL09090306TR
BVEL09180306TR
BVEL09270306TR
BVEL09360306TR
colore/colour
RGB
RGB
RGB
RGB
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
09
18
27
36
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fascio ottico/beam angle
25°*
25°*
25°*
25°*
fissaggio/fixing staffe velis/
velis brackets
staffe velis/
velis brackets
staffe velis/
velis brackets
staffe velis/
velis brackets
accessori/accessories
telecomando/
remote control
telecomando/
remote control
telecomando/
remote control
telecomando/
remote control
assorbimento/powerconsumption
9W
18W
27W
36W
IP/IP
65
65
65
65
codice/code non inclusi/not included
Slave RGB
Master RGB
Controller
caratteristiche/specifications
WMASTERRGB5X3I
WSLAVERGB5X3
WTELEC-RGB
Master RGB + Sensor
Slave RGB
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
controllo RGB/controller RGB
*Esempio schemi di collegamento a p.351
Example of wiring diagram on p.351
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
*Disponibile con lente da 10° o 40° su richiesta. / With 10° or 40° lens version on demand.
applicazioni/applicationsIlluminazione di ambienti, facciate e d’effetto./Interior - outdoor lighting effects.
outdoor / decorativeesterni / decorativo
216
velis LED RGB DMXvetro e alluminio
velis RGB LED DMXglass and aluminum
Apparecchio LED RGB DMXper interni/esterni.Corpo in profilato di alluminio estruso con guar-nizioni stabilizzanti, inserito in un cilindro di vetro borosilicato trasparente ø 6,5cm con chiusure stagne. 3/6/9/12 gruppi di 3 LED RGB da 1W 350mA cablati su circuito per una migliore sta-bilità, con piastra di dissipazione in alluminio, per ottimizzare la dispersione di calore. Ogni gruppo di LED è dotato di un ottica formata da una lente a tre comparti con fascio ottico da 25°. Grazie al sistema di controllo dinamico del-la luce mediante DMX è possibile ottenere effetti luce cromatici gestibili in modalità manuale o automatica, per decidere sia la sequenza colore che il blocco su uno a scelta, utilizzando una console di comando o una centralina a pare-te. Montaggio a parete/plafone/ sospensione, orientabile. Alimentatori e accessori (esclusi) non a bordo dell’apparecchio. Disponibile in 4 differenti lunghezze e potenze. Slave incluso. IP65.
RGB DMX LED luminarie for interior /outdoor use.Interior body in aluminum with gaskets, clear glass ø 6,5cm. 3/6/9/12 set of 3 RGB LED 1W 350mA with an aluminum dissipation plate for optimal heat dissipation. Each set of LED is equipped with a lens with 25° beam angle. Thanks to the light control through DMX, you can get light effects manually or automatically with a console or a wall station. Wall/ceiling/suspension mounting, adjustable. Remote driver. Available in 4 different lengths and power. Slave included. IP65.
fascio ottico/beam angle
25°d
disegni tecnici/technical drawings
935
1235 335ø65
635
985
1285 385
685
DMX
accessori/accessoriesStaffe Velis/ Velis brackets (non incluse/ not included p.338)
OVE-CAVO1+STAF /OVE-PLAF+STAF /OVE-STAFPAR /OVE-ANG+STAF
IP65 Ta min -20°CTa max 35°CRGB9x1W18x1W 36x1W
27x1W
217
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BVEL09090306DMX
BVEL09180306DMX
BVEL09270306DMX
BVEL09360306DMX
colore/colour
RGB
RGB
RGB
RGB
tipo/type
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
interni/esterni
interior/outdoor
LED/LED
09
18
27
36
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fascio ottico/beam angle
25°*
25°*
25°*
25°*
fissaggio/fixing staffe velis/
velis brackets
staffe velis/
velis brackets
staffe velis/
velis brackets
staffe velis/
velis brackets
accessori/accessories
telecomando/
remote control
telecomando/
remote control
telecomando/
remote control
telecomando/
remote control
assorbimento/power consumption
12W
24W
36W
48W
IP/IP
65
65
65
65
codice/code non inclusi/not included
Controller
caratteristiche/specifications
WTELEC-RGB Telecomando / Remote control
(con/with WMASTERRGB5X3l)
controllo RGB-DMX/controller RGB-DMX
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
Master DMX
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
*Disponibile con lente da 10° o 40° su richiesta. / With 10° or 40° lens version on demand.
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
applicazioni/applicationsIlluminazione di ambienti, facciate e d’effetto./Interior - outdoor lighting effects.
Cavi/ Cables
QDMX512/CABLE-A
QDMX512/CABLE-B
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
outdoor / decorativeesterni / decorativo
218
bled LEDvetro e alluminio
bled LED glass and aluminum
Lampada a profilo da incasso a LED per interni/esterni.Corpo in estruso di alluminio, completo di testa-te in pressofusione e diffusore in vetro traspa-rente.Indicata per l’incasso a pavimento tramite l’apposita cassaforma in dotazione, consente di creare un’illuminazione a luce bianca con tonalità fredda o calda. Disponibile in due lun-ghezze diverse con 6 o 12 gruppi di 3 LED da 1,2W. Ogni gruppo di LED è dotato di un’ottica formata da una lente a tre comparti con fascio ottico da 25°, cablati su circuito per una miglio-re stabilità, con piastra di dissipazione in allu-minio, per ottimizzare la dispersione del calore. Montaggio ad incasso. Alimentatori e accessori (esclusi) non a bordo dell’apparecchio. Grado di protezione IP65. Pedonabile.Alimentazione 24V DC.Collegamento in parallelo.
LED recessed lampfor interior/outdoor use.Body made of aluminum, extrusion complete with die-casted end-caps and screen made of clear glass. Suitable for floor recessing. Can be supplied with warm white light or cool white light. Available in two different lengths with 6 or 12 set of 3 LED 1,2W. Each group of LED beam has an angle of 25°, with dissipation plate in aluminum. Recessed mounting. Remote driver (not included). Optimal heat dissipation. IP65. Walk over.24V DC feeding.Parallel connection.
disegni tecnici/technical drawings
montaggio/installationFissaggio con Staffa Bled (non inclusa p.335)/ Incasso tramite cassaforma (inclusa)
Fixing with Bled bracket (not included p.335)/Recessed installation box (included)
0.50
1.00
1.50
2.00
0.50
1.00
1.50
2.00
7490
3240
1800
1100
11300
4460
2610
1750
/
/
/
/
/
/
/
/
h (m) h (m)E (lx) E (lx)D (cm) D (cm)
25°d
605/1205630/1230
123,5
77101
640/1240120
11686
IP65 Ta max 35°C18x1,2W36x1,2W Ta min -20°C
illuminamento/illuminationbianco freddo/cool white
Bled L=64cm Bled L=124cm
219
applicazioni/applications
Illuminazione di ambienti, facciate e d’effetto./Interior/outdoor lighting effects.
*Esempio schemi di collegamento a p.350
Example of wiring diagram on p.350
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MBLE02180300AA
MBLE0218030WAA
MBLE02360300AA
MBLE0236030WAA
colore/colour
cool white*
warm white*
cool white*
warm white*
tipo/type
interni/esterni
interior/outdoor
L=64 cm
interni/esterni
interior/outdoor
L=64 cm
interni/esterni
interior/outdoor
L=124 cm
interni/esterni
interior/outdoor
L=124 cm
LED/LED
18
18
36
36
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fascio ottico/beam angle
25°*
25°*
25°*
25°*
fissaggio/fixing cassaforma
inclusa/
with included box
cassaforma
inclusa/
with included box
cassaforma
inclusa/
with included box
cassaforma
inclusa/
with included box
accessori/accessories
staffa bled/
bled bracket
staffa bled/
bled bracket
staffa bled/
bled bracket
staffa bled/
bled bracket
IP/IP
65
65
65
65
assorbimento/powerconsumption
24W
24W
48W
48W
*Disponibile con LED a luce colorata e/o con lente da 10° o 40° su richiesta. / Coloured LED and/or with 10 or 40° lens on demand.
outdooresterni
220
bled LED RGBvetro e alluminio
bled LED RGB glass and aluminum
Lampada a profilo da incasso a LED RGB per interni/ esterni.Con corpo in estruso di alluminio, completa di testate in pressofusione e diffusore in vetro trasparente. Indicata per l’incasso a pavimen-to tramite l’apposita cassaforma in dotazione, consente di creare un’illuminazione con effetto di cambio colore nella versione RGB. Disponibi-le in due lunghezze diverse con 6 o 12 gruppi di 3 LED RGB da 1W. Ogni gruppo di LED è dotato di un ottica formata da una lente a tre comparti con fascio ottico da 25°, cablati su circuito per una migliore stabilità, con piastra di dissipazione in alluminio, per ottimizzare la dispersione del calore. Grazie al sistema di con-trollo dinamico della luce, è possibile ottenere effetti luce cromatici che possono essere gestiti sia in modalità manuale che automatica, dando la possibilità di decidere sia la sequenza colore che il blocco su uno a scelta, anche con tele-comando. Montaggio ad incasso. Alimentatori e accessori (esclusi) non a bordo dell’apparec-chio. Grado di protezione IP65.Pedonabile.
RGB LED recessed lampfor interior/outdoor use.Body made of aluminum, extrusion complete with die-casted end-caps and screen made of clear glass. Suitable for floor recessing, enables the changing of colour via RGB. Available in two different lengths with 6 or 12 set of 3 LED RGB 1W. Each group of LED has a 25° beam angle, with dissipation plate in aluminum, for optimal heat dissipation. Thanks to dinamic control sy-stem of light, it can be obtained cromatic light effect controlled in to manual way or automatic way, given the possibility of a color sequence or fixed color. Remote control as option. IP65. Walk over.
disegni tecnici/technical drawings
640/1240
77101
120
11686
IP65
fascio ottico/beam angle
25°d
605/1205630/1230
123,5
77101
Ta max 35°CRGB18x1W36x1W Ta min -20°C
montaggio/installationFissaggio con Staffa Bled (non inclusa p.335)/ Incasso tramite cassaforma (inclusa)
Fixing with Bled bracket (not included p.335)/Recessed installation box (included)
221
applicazioni/applicationsIlluminazione di ambienti, facciate e d’effetto./Interior/outdoor lighting effects.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MBLE02180306AA
MBLE02360306AA
colore/colour
RGB
RGB
tipo/type
interni/esterni
interior/outdoor
L=64 cm
interni/esterni
interior/outdoor
L=124 cm
LED/LED
18
36
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
ottica/optic
fissa/
fixed
fissa/
fixed
fascio ottico/beam angle
25°*
25°*
fissaggio/fixing cassaforma
inclusa/
with included box
cassaforma
inclusa/
with included box
accessori/accessories
teleomando/
remote contol/
staffa bled/
bled bracket
teleomando/
remote contol/
staffa bled/
bled bracket
IP/IP
65
65
codice/code non inclusi/not included
Slave RGB
master RGB
Controller
caratteristiche/specifications
WMASTERRGB5X3I
WSLAVERGB5X3
WTELEC-RGB
Master RGB + Sensor
Slave RGB
Telecomando / Remote control
(con/with WMASTERRGB5X3l)
controllo RGB/controller RGB
*Esempio schemi di collegamento a p.351
Example of wiring diagram on p.351
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
assorbimento/powerconsumption
18W
36W
*Disponibile con lente da 10° o 40° su richiesta. / With 10 or 40° lens on demand.
outdoor / decorativeesterni / decorativo
222
bled LED RGB DMXvetro e alluminio
bled LED RGB DMXglass and aluminum
Lampada a profilo da incasso a LED RGB DMX per interni/ esterni.Con corpo in estruso di alluminio, completa di testate in pressofusione e diffusore in vetro trasparente. Indicata per l’incasso a pavimen-to tramite l’apposita cassaforma in dotazione, consente di creare un’illuminazione con effetto di cambio colore nella versione RGB DMX. Di-sponibile in due lunghezze diverse con 6 o 12 gruppi di 3 LED RGB da 1W. Ogni gruppo di LED è dotato di un ottica formata da una lente a tre comparti con fascio ottico da 25°, cablati su circuito per una migliore stabilità, con pia-stra di dissipazione in alluminio, per ottimizzare la dispersione del calore. Grazie al sistema di controllo dinamico della luce DMX, è possibile ottenere effetti luce cromatici che possono es-sere gestiti sia in modalità manuale che auto-matica, dando la possibilità di decidere sia la sequenza colore che il blocco su uno a scelta, anche con telecomando. Montaggio ad incas-so. Alimentatori e accessori (esclusi) non a bor-do dell’apparecchio. Grado di protezione IP65. Pedonabile.
RGB DMX LED recessed lampfor interior/outdoor use.Body made of aluminum, extrusion complete with die-casted end-caps and screen made of clear glass. Suitable for floor recessing, enables the changing of colour via RGB. Available in two different lengths with 6 or 12 set of 3 LED RGB 1W. Each group of LED has a 25° beam angle, with dissipation plate in aluminum, for optimal heat dissipation. Thanks to dinamic control sy-stem of light, it can be obtained cromatic light effect controlled in to manual way or automatic way, given the possibility of a color sequence or fixed color. Remote control as option. IP65. Walk over.
disegni tecnici/technical drawings
640/1240
77101
120
11686
DMX
fascio ottico/beam angle
25°d
605/1205630/1230
123,5
77101
montaggio/installationFissaggio con Staffa Bled (non inclusa p.335)/ Incasso tramite cassaforma (inclusa)
Fixing with Bled bracket (not included p.335)/Recessed installation box (included)
IP65 Ta max 35°CRGB18x1W36x1W Ta min -20°C
223
applicazioni/applications
Illuminazione di ambienti, facciate, d’effetto./Interior/outdoor lighting effects.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MBLE02180306DMX
MBLE02360306DMX
colore/colour
RGB
RGB
tipo/type
interni/esterni
interior/outdoor
L=64 cm
interni/esterni
interior/outdoor
L=124 cm
LED/LED
18
36
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
vetro/ alluminio/
glass/ aluminum
vetro/ alluminio/
glass/ aluminum
ottica/optic
fissa/
fixed
fissa/
fixed
fascio ottico/beam angle
25°*
25°*
fissaggio/fixing cassaforma
inclusa/
with included box
cassaforma
inclusa/
with included box
accessori/accessories
teleomando/
remote contol/
staffa bled/
bled bracket
teleomando/
remote contol/
staffa bled/
bled bracket
IP/IP
65
65
*Disponibile con lente da 10° o 40° su richiesta. / With 10° or 40° lens version on demand.
codice/code non inclusi/not included
Controller
caratteristiche/specifications
WTELEC-RGB Telecomando / Remote control
(con/with WMASTERRGB5X3l)
controllo RGB-DMX/controller RGB-DMX
WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
Master DMX
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
Cavi/ Cables
QDMX512/CABLE-A
QDMX512/CABLE-B
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
assorbimento/powerconsumption
24W
48W
outdoor / decorativeesterni / decorativo
224
Profilo modulare a LED a sospensione.Corpo in lamiera con finitura bianca/nera (a richie-sta corpo in policarbonato trasparente). Alimenta-tore 24V DC 100W a bordo. Sospensioni max 2 metri. E’ possibile accoppiare i profili con apposite staffe orientabili. 3 faretti equipaggiati con 9 LED 3W 700mA (27W tot.) ad alta resa con driver in-tegrato. Ottica con 9 lenti con fascio ottico 25° (a richiesta lente da 10°/40°). IP20. Eccellente Indice di Resa Cromatica (warm white = CRI >90).BREVETTATO.
LED suspended modular profile.White/black plate body (on demand clear polycarbonate body). Integrated LED driver 24V DC 100W. Suspension cables 2 meters max. Profiles can be joint with connectors. 3 spots equipped with 9 LED 3W 700mA (27W tot.) high emission built-in driver. Optic with 9 lenses 25° beam angle (on demand 10/40° lens). IP20. Excellent Colour Rendering Index (warm white = CRI >90).PATENTED.
disegni tecnici/technical drawings
shapelineacciaio e alluminio
shapeline steel and aluminum
applicazioni/applicationsIlluminazione di banconi, sale riunioni, reception./Lighting desks, meeting rooms, reception, shops, general lighting.
70
1200
2m
25°
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MSHA03274300BI
MSHA0327430WBI
MSHA03274300NE
MSHA0327430WNE
colore/colour
cool white
warm white
cool white
warm white
tipo/type
interni/
interior
interni/
interior
interni/
interior
interni/
interior
LED/LED
27
27
27
27
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
acciaio/ alluminio/
steel/ aluminum
acciaio/ alluminio/
steel/ aluminum
acciaio/ alluminio/
steel/ aluminum
acciaio/ alluminio/
steel/ aluminum
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fascio ottico/beam angle
25°*
25°*
25°*
25°*
fissaggio/fixing sospensione/
suspension
sospensione/
suspension
sospensione/
suspension
sospensione/
suspension
finitura/finishing
bianco/
white
bianco/
white
nero/
black
nero/
black
IP/IP
20
20
20
20
*Disponibile con lente da 10° o 40° su richiesta. / With 10° or 40° lens version on demand.
Ta max 35°C90WIP20
illuminamento/illumination
0.50
1.00
1.50
2.00
14800
4590
2700
1800
/
/
/
/
h (m) E (lx) D (cm)
bianco freddo/cool white
230V
finitura neroblack finishing
finitura biancowhite finishing
interiorinterni
228
soul light design Aldo Solbiatialluminio
soul light aluminum
Proiettore professionale a LED per in-terni.Corpo in alluminio verniciato composto da 72 LED RGBW (White 3000°K).La posizione e l’orientamento dei LED, e rispet-tive lenti, è fissa ed è studiata con lo scopo di diffondere al meglio il colore, grazie anche ad un riflettore interno asimmetrico. Il fascio ottico combinato è composto da lenti da 25 e 40° su tre piani ottici, ed è orientabile in un angolo maggiore o superiore a 45°.L’apparecchio prevede deflettori laterali per la compensazione del fascio con gli altri Soul Light presenti. Il sistema RGB + white color mixing può essere gestito con segnale DMX: 15 canali in modalità estesa e 7 in modalità compatta. La codifica dei canali e il set up, avvengono tra-mite display con spegnimento temporizzato e tastiera integrata. L’apparecchio può lavorare ad 8/16 bit, garantendo così una maggiore pro-fondità di colore, una maggiore percezione di sfumature ed una migliore resa cromatica. La dissipazione del calore è passiva, garanten-do così l’ assenza di rumore altrimenti generata da ventole. È presente una protezione contro i sovraccarichi. Sorgente protetta da un vetro in Pirex® temprato ultrachiaro.Possibilità di montaggio in studio su struttura, a plafone, o con staffe di sostegno in acciaio verniciato a terra (escluse).
LED Professional luminaire for interior.Varnished aluminum body composed with 72 LEDs RGBW (white 3000°K).The position and the adjustment of LEDs and lenses is fixed and designed with the aim to dif-fuse the color thanks to an internal asymmetri-cal reflector. The optic beam is composed with 25° lenses and 40° lenses on three optic lines and it is adjustable with an angle upper than 45°. The luminaire has lateral deflectors. RGB system + white color mixing is controlled with a DMX signal: 15 channels in extended mode and 7 in compact mode. The code of the channels and the set up is made through a display with temporized switch off and integrated board. The fitting can work at 8/16 bit and allow a bet-ter color depth, thus ensuring a better depth of color, a perception of nuances and a better co-lor rendition.Heat dissipation is passive, thus ensuring the absence of noise otherwise generated by fans. There is an overload protection.Source protected by a tempered glass Pyrex ® very transparent.Possibility of mounting in structure, ceiling, or painted steel ground support brackets (not in-cluded).
72LED RGBW Ta max 35°CDMXIP20 230V
229
interiorinterni
applicazioni/applicationsIlluminazione di fondali e programmi televisivi in alta definizione./Lighting backdrops, television programs in high definition.
prodotto/product
tabella di riepilogo prodotti/ product overview table
accessori/accessories
staffe /
brackets
codice/code
BSOULS4724508NE
colore/colour
RGBW
tipo/type
interni/
interior
LED/LED
72
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
orientabile/
oriented
IP/IP
20
fissaggio/fixing
con staffe o plafone/
with brackets or ceiling
disegni tecnici/technical drawings
387 387
105
280
355
accessori/accessoriesStaffe BSOUL/PIEDE/NE (non incluse p.338)
Brackets BSOUL/PIEDE/NE (not included p.338)
230
kalibro Malluminio anodizzato
kalibro M anodized aluminum
Proiettore LED sagomatore per interni.Applicazione a 2/3 metri. Corpo in alluminio anodizzato nero, ottica con focale regolabile. Il movimento dell’ottica anteriore consente una perfetta messa a fuoco, il fissaggio avviene tramite vite. Il fascio di luce è sagomabile grazie a lamelle di acciaio inox. 1 LED 13W 700mA ad altissima resa, driver integrato 24V DC. Apposito dissipatore per il calore generato dal LED. Fissaggio con staffa in acciaio inox satinato. Possibilità di abbinare alla staffa un adattatore per binario 24V. IP20. Potenza assorbita: 16W. Collegamento in parallelo.
LED projector shaper for interior.Application at 2/3 meters distance.Black anodized aluminum body, optic with adjustable focusing. The movement of the front optic allowed a perfect focusing, through screw. The beam of light is shaped thanks to the stainless stell thin plates. 1 LED 13W 700mA high emission, built.in driver 24V DC. Specific heat sink for LED. Fixing with sanded stainless steel bracket. Possibility to use with 24V rail adapter kit. IP20. Power consumption: 16W. Parallel connection.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MSAGM4019400AN
MSAGM401940WAN
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
LED/LED
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
ottica/optic
sagomata/
shaped
sagomata/
shaped
fissaggio/fixing con staffa/
with bracket
con staffa/
with bracket
IP/IP
20
20
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
170
212,5 85
disegni tecnici/technical drawings
applicazioni/applicationsIlluminazione di quadri. Possibilità di sagomare il fascio./Painting lighting, shaping light.
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
accessori/accessoriesAdattatore 24V DC (non incluso p.318)
Adapter 24V DC (not included p.318)
IP20 16W Ta max 35°C
illuminamento/illumination
h h h
1m550lxh=60
46°
ø2,5m
2m130lxh=120 3m
60lxh=180
track systemcompatible
231
kalibro Lalluminio anodizzato
kalibro L anodized aluminum
Proiettore LED sagomatore per interni.Applicazione a 6/8 metri. Corpo in alluminio anodizzato nero, ottica con focale regolabile. Il movimento dell’ottica anteriore consente una perfetta messa a fuoco, il fissaggio avviene tramite vite. Il fascio di luce è sagomabile grazie a lamelle di acciaio inox. 1 LED 13W 700mA ad altissima resa, driver integrato 24V DC. Apposito dissipatore per il calore generato dal LED. Fissaggio con staffa in acciaio inox satinato. Possibilità di abbinare alla staffa un adattatore per binario 24V. IP20. Potenza assorbita: 16W. Collegamento in parallelo.
LED projector shaper for interior.Application at 6/8 meters distance.Black anodized aluminum body, optic with adjustable focusing. The movement of the front optic allowed a perfect focusing, through screw. The beam of light is shaped thanks to the stainless stell thin plates. 1 LED 13W 700mA high emission, built.in driver 24V DC. Specific heat sink for LED. Fixing with sanded stainless steel bracket. Possibility to use with 24V rail adapter kit. IP20. Power consumption: 16W. Parallel connection.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MSAGL4019400AN
MSAGL401940WAN
colore/colour
cool white*
warm white*
tipo/type
interni/
interior
interni/
interior
LED/LED
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
ottica/optic
sagomata/
shaped
sagomata/
shaped
fissaggio/fixing con staffa/
with bracket
con staffa/
with bracket
IP/IP
20
20
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
170
280 85
disegni tecnici/technical drawings
applicazioni/applicationsIlluminazione di quadri. Possibilità di sagomare il fascio./Painting lighting, shaping light.
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
accessori/accessoriesAdattatore 24V DC (non incluso p.318)
Adapter 24V DC (not included p.318)
IP20 16W Ta max 35°C
illuminamento/illumination
17°h h h h h h h
1m3200lxh=28
2m800lxh=48
3m260lxh=68
4m200lxh=88
5m128lxh=108
6m89lx
h=1287m50lx
h=148
ø2m
track systemcompatible
interiorinterni
234
Lampada decorativa a LED.Corpo in alluminio adatto per creare effetti lu-minosi a raggiera sulla parete. La sorgente è composta da 1 LED da 2,5W 700 mA ad alta resa che può essere fornito in diversi colori. Ali-mentatore esterno (non incluso). Grado di pro-tezione IP20.
Decorative lamp with LED. Aluminum body suitable to create wall light effects. Source with 1 LED 2,5W 700 mA high emission in different colours. Outdoor LED driver (not included). IP20.
rayluxalluminio
raylux aluminum
IP20 2,5W Ta max 35°C
disegni tecnici/technical drawings
90 64,5
54
235
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MRAY04010300GR
colore/colour
cool white*
tipo/type
interni/
interior
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
IP/IP
20
fissaggio/fixing
a parete/
wall
alimentatori/LED drivers
applicazioni/applicationsIlluminazione d’effetto, decorazione, locali pubblici. È particolarmente adatta per l’impiego in locali quali ristoranti, bar, discoteche, o anche in abitazioni quando si vuole avere un effetto luce particolare./Light effects, decoration and public spaces. To use in restaurants, bars, discos or private houses for lighting effects.
*Esempio schemi di collegamento a p.345
Example of wiring diagram on p.345
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1
3
3-5
4-12
4-12
8
/
WALIMLED 01700
WALIMLED 03700
WALIMLED 05700
WALIMLED 12700
WALIMLED 12700D
WALIM/DIMM/JOLLY
WBOKVAR
3W - 700mA - 32x50x18 (h)
10W - 700mA - 115x34x20 (h)
18W - 700mA - 160x45x35 (h)
36W - 700mA - 132x40x30 (h)
36W - 700mA - 132x40x30 (h) - dimm.
25W - 700mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
*Disponibile con LED a luce calda o colorata su richiesta. / Warm white LED or coloured LED on demand.
interiorinterni
236
raylux RGBalluminio
raylux aluminum
Lampada decorativa a LED RGB.Corpo in alluminio, adatto per creare effetti lumi-nosi a raggiera sulla parete. La sorgente è com-posta da 1 LED da 4,6W ad alta resa fornito in versione RGB per il cambio colore. L’alimen-tatore o la centralina per il cambio colore (non compresi) sono esterni. Grado di protezione IP20. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando manuale agendo direttamente sul master o tra-mite telecomando.
Decorative lamp with LED RGB.Aluminum body suitable to create wall light effects. Source with 1 LED 4,6W high emission in RGB version. The feeder or the change colour controller (not included) are remote. IP20. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls.
disegni tecnici/technical drawings
90 64,5
54
Ta max 35°CIP20 4,6W RGB
237
applicazioni/applicationsIlluminazione d’effetto, decorazione, locali pubblici. È particolarmente adatta per l’impiego in locali quali ristoranti, bar, discoteche, o anche in abitazioni quando si vuole avere un effetto luce particolare./Light effects, decoration and public spaces. To use in restaurants, bars, discos or private houses for lighting effects.
prodotto/product
tabella di riepilogo prodotti/ product overview table
accessori/accessories
telecomando /
remote control
codice/code
MRAY04010305GR
colore/colour
RGB
tipo/type
interni/
interior
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
IP/IP
20
fissaggio/fixing
a parete/
wall
*Esempio schemi di collegamento a p.354-356
Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
3
7
11
18
45
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
controllo RGB/controller RGB
alimentatori/ LED drivers - Controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-capController
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
3
/
/
/
5
3
Telecomando / Remote control
(con/with WMASTERRGB5X3l)WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
!
interior / decorativeinterni / decorativo
238
Apparecchio per interni/esterni a LED.Corpo in acciaio inox AISI 304 verniciato gri-gio. Consente di avere un fascio di luce bianca o colorata. La sorgente è costituita da 3 LED da 1,2W 350mA ad altissima resa. È dotato di ottica con lente a tre comparti. Possibilità di fa-scio 10°, 25°, 40°. Il grado di protezione è IP65. Fissaggio a parete tramite base.Alimentatore incluso nella base.
LED fitting for interior/ outdoor use.AISI 304 stainless steel body grey vanished. It creates a beam of white or coloured light. The source is composed by 3 LED 1,2W 350mA high emission. It is equipped with a fixed optic with lens at three sections. Beam angle 10°, 25°, 40°. IP65. Wall fixed with base.Integrated feeder.
disegni tecnici/technical drawings
illuminamento/illumination
giet 01 plusacciaio inox
giet 01 plus stainless steel
applicazioni/applicationsIlluminazione d’effetto, decorazione, locali pubblici. È particolarmente adatta per l’impiego in locali quali ristoranti, bar, discoteche, o anche in abitazioni quando si vuole avere un effetto luce particolare./Light effects, decoration and public spaces. To use in restaurants, bars, discos or private houses for lighting effects.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MGIE0903F300GR
MGIE09034300GR
MGIE09037300GR
colore/colour
cool white*
cool white*
cool white*
tipo/type
interni/ esterni/
interior/ outdoor
interni/ esterni/
interior/ outdoor
interni/ esterni/
interior/ outdoor
LED/LED
03
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
acciaio inox/
stainless steel
acciaio inox/
stainless steel
acciaio inox/
stainless steel
fascio ottico/beam angle
10°
25°
40°
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissaggio/fixing
a parete/
wall
a parete/
wall
a parete/
wall
IP/IP
65
65
65
7890
115
*Disponibile con LED a luce calda o colorata su richiesta. / Warm white LED or coloured LED on demand.
IP65 3x1,2W Ta max 35°C
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90
h (m) E (lx) D (cm)
25°
bianco freddo/cool white
Ta min -20°C 230V
239
Apparecchio per interni/esterni a LED.Corpo in acciaio inox AISI 304 verniciato grigio. Consente di avere un doppio fascio di luce bianca o colorata. La sorgente è costituita da 6 LED da 1,2W 350mA ad altissima resa. È dotato di ottica con lente a tre comparti. Possibilità di fascio 10°, 25°, 40°. Il grado di protezione è IP65. Fissaggio a parete tramite base.Alimentatore incluso nella base.
LED fitting for interior/ outdoor use.AISI 304 stainless steel body grey vanished. It creates a double emission light beam of white or coloured light. The source is composed by 3 LED 1,2W 350mA high emission. It is equipped with a fixed optic with lens are three sections. Beam angle 10°, 25°, 40°. IP65. Wall fixed with base.Integrated feeder.
disegni tecnici/technical drawings
illuminamento/illumination
giet 02 plusacciaio inox
giet 02 plus stainless steel
applicazioni/applicationsIlluminazione d’effetto, decorazione, locali pubblici. È particolarmente adatta per l’impiego in locali quali ristoranti, bar, discoteche, o anche in abitazioni quando si vuole avere un effetto luce particolare./Light effects, decoration and public spaces. To use in restaurants, bars, discos or private houses for lighting effects.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MGIE0906F300GR
MGIE09064300GR
MGIE09067300GR
colore/colour
cool white*
cool white*
cool white*
tipo/type
interni/ esterni/
interior/ outdoor
interni/ esterni/
interior/ outdoor
interni/ esterni/
interior/ outdoor
LED/LED
06
06
06
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
acciaio inox/
stainless steel
acciaio inox/
stainless steel
acciaio inox/
stainless steel
fascio ottico/beam angle
10°
25°
40°
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissaggio/fixing
a parete/
wall
a parete/
wall
a parete/
wall
IP/IP
65
65
65
78
*Disponibile con LED a luce calda o colorata su richiesta. / Warm white LED or coloured LED on demand.
IP65 6x1,2W Ta max 35°C
163
115
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90
h (m) E (lx) D (cm)
25°
bianco freddo/cool white
Ta min -20°C 230V
outdooresterni
240
giet 01 plus RGBacciaio inox
giet 01 plus RGB stainless steel
Apparecchio a LED RGBper interni/esterni.Corpo in acciaio inox AISI 304 verniciato grigio. Consente di avere un fascio di luce colorata nel-la versione RGB. La sorgente è costituita da 3 LED da 1W 350mA RGB ad altissima resa. È dotato di ottica fissa con lente a tre comparti. Possibilità di fascio 10°, 25°, 40°. Fissaggio tra-mite base. La sequenza dinamica del cambio colore può avvenire automaticamente o a co-mando manuale agendo direttamente sul ma-ster o tramite telecomando. IP65.
LED RGB fittingfor interior/outdoor use.AISI 304 stainless steel body, grey vanished. It creates a beam of coloured light in RGB version. The source is composed by 3 LED 1W 350mA RGB high emission. It is equipped with a fixed optic with lens at three sections. Beam angle 10°, 25°, 40°. Fixing with base. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP65.
disegni tecnici/technical drawings
7890
115
fascio ottico/beam angle
10° 25° 40°
Ta max 35°CIP65 3x1W RGB Ta min -20°C
241
applicazioni/applicationsIlluminazione d’effetto, decorazione, locali pubblici. È particolarmente adatta per l’impiego in locali quali ristoranti, bar, discoteche, o anche in abitazioni quando si vuole avere un effetto luce particolare./Light effects, decoration and public spaces. To use in restaurants, bars, discos or private houses for lighting effects.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MGIE0903F306GR
MGIE09034306GR
MGIE09037306GR
colore/colour
RGB
RGB
RGB
tipo/type
interni/esterni / interior/outdoor
interni/esterni / interior/outdoor
interni/esterni / interior/outdoor
LED/LED
03
03
03
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
acciaio inox/stainless steel
acciaio inox/stainless steel
acciaio inox/stainless steel
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fascio ottico/beam angle
10°
25°
40°
fissaggio/fixing
a parete/wall
a parete/wall
a parete/wall
IP/IP
65
65
65
accessori/accessories
telecomando/remote control
telecomando/remote control
telecomando/remote control
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 /(5 DMX)
12 /(11 DMX)
18 /(17 DMX)
28 /(28 DMX)
70 /(70 DMX)
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
5
/
/
/
6 (24V)
5
Telecomando / Remote control
(con/with WMASTERRGB5X3l) WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX, 6 outputs
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
outdoor / decorativeesterni / decorativo
242
giet 02 plus RGBacciaio inox
giet 02 plus RGB stainless steel
Apparecchio a LED RGBper interni/esterni.Corpo in acciaio inox AISI 304 verniciato grigio. Consente di avere un fascio di luce colorata nel-la versione RGB. La sorgente è costituita da 6 LED da 1W 350mA RGB ad altissima resa. È dotato di ottica fissa con lente a tre comparti. Possibilità di fascio 10°, 25°, 40°. Fissaggio tra-mite base. La sequenza dinamica del cambio colore può avvenire automaticamente o a co-mando manuale agendo direttamente sul ma-ster o tramite telecomando. IP65.
LED RGB fittingfor interior/outdoor use.AISI 304 stainless steel body, grey vanished. It creates a double emission light beam of coloured light in RGB version. The source is composed by 6 LED 1W 350mA RGB high emission. It is equipped with a fixed optic with lens at three sections. Beam angle 10°, 25°, 40°. Fixing with base. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP65.
disegni tecnici/technical drawings
Ta max 35°CIP65 RGB6x1W
78163
115
fascio ottico/beam angle
10° 25° 40°
Ta min -20°C
243
applicazioni/applicationsIlluminazione d’effetto, decorazione, locali pubblici. È particolarmente adatta per l’impiego in locali quali ristoranti, bar, discoteche, o anche in abitazioni quando si vuole avere un effetto luce particolare./Light effects, decoration and public spaces. To use in restaurants, bars, discos or private houses for lighting effects.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MGIE0906F306GR
MGIE09064306GR
MGIE09067306GR
colore/colour
RGB
RGB
RGB
tipo/type
interni/esterni / interior/outdoor
interni/esterni / interior/outdoor
interni/esterni / interior/outdoor
LED/LED
06
06
06
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
acciaio inox/stainless steel
acciaio inox/stainless steel
acciaio inox/stainless steel
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fascio ottico/beam angle
10°
25°
40°
fissaggio/fixing
a parete/wall
a parete/wall
a parete/wall
IP/IP
65
65
65
accessori/accessories
telecomando/remote control
telecomando/remote control
telecomando/remote control
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
2
5
8
14
30
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-cap
Controller
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
2
/
/
/
3
2
Telecomando / Remote control
(con/with WMASTERRGB5X3l) WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX, 6 outputs
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
controllo RGB/controller RGB
controllo RGB-DMX/controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
!
*Esempio schemi di collegamento a p.354-356/ Example of wiring diagram on p.354-356
outdoor / decorativeesterni / decorativo
244
Lampada da parete a LED.Corpo in pressofusione di alluminio verniciato in colore grigio. Sorgente luminosa costituita da 1 LED da 2,5W ad alta resa. Schermo diffusore in vetro satinato per la diffusione uniforme della luce. Grado di protezione IP44.Alimentatore interno incluso.
Wall lamp with LED.Die-cast aluminum grey painted body. Light source with high emission LED 2,5W. Frosted screen for diffused and even light. IP44.Integrated feeder included.
disegni tecnici/technical drawings
glad 01alluminio
glad 01 aluminum
applicazioni/applications
Segnalazione di percorsi e superfici./Path marking, signal lighting.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MGLA09010300GR
colore/colour
cool white*
tipo/type
interni/ esterni/
interior/ outdoor
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
IP/IP
44
fissaggio/fixing
a parete/
wall
ø12060
110
45
Ta max 35°CIP44 2,5W
*Disponibile con LED a luce calda o colorata su richiesta. / Warm white LED or coloured LED on demand.
230V
245
Lampada da parete a LED.Corpo in pressofusione di alluminio verniciato in colore grigio. Sorgente luminosa costituita da 1 LED da 2,5W ad alta resa. Schermo diffusore in vetro satinato per la diffusione uniforme della luce direzionata verso il basso. Grado di protezione IP44.Alimentatore interno incluso.
Wall lamp with LED.Die-cast aluminum grey painted body. Light source with high emission LED 2,5W. Frosted screen for diffused and even downlight. IP44. Integrated feeder included.
disegni tecnici/technical drawings
glad 02alluminio
glad 02 aluminum
applicazioni/applications
Segnalazione di percorsi e superfici./Path marking, signal lighting.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MGLAA9010300GR
colore/colour
cool white*
tipo/type
interni/ esterni/
interior/ outdoor
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
IP/IP
44
fissaggio/fixing
a parete/
wall
52 ø100
*Disponibile con LED a luce calda o colorata su richiesta. / Warm white LED or coloured LED on demand.
interiorinterni
Ta max 35°CIP44 2,5W 230V
246
Lampada per interni/esternida incasso a LED.Corpo in pressofusione di alluminio verniciato in co-lore grigio. Sorgente luminosa costituita da 1 LED da 1,2W 350mA ad alta resa. Schermo diffusore sabbiato per la diffusione uniforme della luce, do-tata di alimentatore interno, completa di molle di fissaggio. Il fissaggio avviene tramite cassaforma in materiale plastico. Grado di protezione IP54.Alimentatore interno.
Recessed lamp for interior/outdoor use. Die-cast aluminum grey painted body. Light source with 1 LED 1,2W 350mA high emission. Frosted screen for diffused and even light, with mounting springs. Installation with plastic recessed box. IP54.Integrated feeder.
disegni tecnici/technical drawings
daf 01alluminio
daf 01 aluminum
applicazioni/applications
Segnalazione di percorsi e superfici./Path marking, signal lighting.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MDAF02010500GR
colore/colour
cool white*
tipo/type
interni/ esterni/
interior/ outdoor
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
IP/IP
54
accessori/accessories
cassaforma/
box
fissaggio/fixing
con molle/
with spring
135 70 90108
8090
d - zona non illuminata /dark area
d
h
accessori/accessoriesIncasso tramite cassaforma MDAFCASSA1 (non inclusa p.334)
Box MDAFCASSA1 (not included p.334)
illuminamento/illumination
0.25
0.50
0.75
1.00
120
27
10
6
10
20
37
45
h (m) E (lx) D (cm)
Ta max 35°CIP54 1,2W
*Disponibile con LED neutral white o luce calda o colorata su richiesta. /Neutral white or warm white or coloured LED on demand.
bianco freddo/cool white
Ta min -20°C 230V
247
Lampada per interni/esternida incasso a LED.Corpo in pressofusione di alluminio verniciato in colore grigio. Sorgente luminosa costituita da 2 LED da 1,2W 350mA ad alta resa. Schermo diffusore sabbiato per la diffusione uniforme della luce, dotata di alimentatore interno, completa di molle di fissaggio. Il fissaggio avviene tramite cassaforma in materiale plastico. Grado di protezione IP54.Alimentatore interno.
Recessed lamp for interior/outdoor use. Die-cast aluminum grey painted body. Light source with 2 LED 1,2W 350mA high emission. Frosted screen for diffused and even light, with mounting springs. Installation with plastic recessed box. IP54.Integrated feeder.
disegni tecnici/technical drawings
daf 02alluminio
daf 02 aluminum
applicazioni/applications
Segnalazione di percorsi e superfici./Path marking, signal lighting.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MDAF02020500GR
colore/colour
cool white*
tipo/type
interni/ esterni/
interior/ outdoor
LED/LED
02
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
IP/IP
54
accessori/accessories
cassaforma/
box
fissaggio/fixing
con molle/
with spring
d - zona non illuminata /dark area
d
h
accessori/accessoriesIncasso tramite cassaforma MDAFCASSA2 (non inclusa p.334)
Box MDAFCASSA2 (not included p.334)
illuminamento/illumination
0.25
0.50
0.75
1.00
135
35
15
8
10
20
37
45
h (m) E (lx) D (cm)
135135
115108
80135
*Disponibile con LED neutral white o luce calda o colorata su richiesta. /Neutral white or warm white or coloured LED on demand.
2x1,2W Ta max 35°CIP54
bianco freddo/cool white
Ta min -20°C 230V
outdooresterni
248
Lampada per interni/esternida incasso a LED.Corpo in pressofusione di alluminio verniciato in colore grigio. Sorgente luminosa costituita da 3 LED da 1,2W 350mA ad alta resa. Schermo dif-fusore sabbiato per la diffusione uniforme della luce, dotata di alimentatore interno, completa di molle di fissaggio. Il fissaggio avviene tramite cassaforma in materiale plastico. Grado di pro-tezione IP54.Alimentatore interno.
Recessed lamp for interior/outdoor use. Die-casted aluminum grey painted body. Light source with 3 LED 1,2W 350mA high emission. Frosted screen for diffused and even light, with mounting springs. Installation with plastic recessed box. IP54.Integrated feeder.
disegni tecnici/technical drawings
daf 03alluminio
daf 03 aluminum
applicazioni/applications
Segnalazione di percorsi e superfici./Path marking, signal lighting.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MDAF02030500GR
colore/colour
cool white*
tipo/type
interni/ esterni/
interior/ outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
IP/IP
54
accessori/accessories
cassaforma/
box
fissaggio/fixing
con molle/
with spring
d - zona non illuminata /dark area
d
h
accessori/accessoriesIncasso tramite cassaforma MDAFCASSA3 (non inclusa p.334)
Box MDAFCASSA3 (not included p.334)
illuminamento/illumination
0.25
0.50
0.75
1.00
285
80
35
20
10
20
37
45
h (m) E (lx) D (cm)
135160 180
108
80180
3x1,2W Ta max 35°CIP54
bianco freddo/cool white
*Disponibile con LED neutral white o luce calda o colorata su richiesta. /Neutral white or warm white or coloured LED on demand.
Ta min -20°C 230V
outdooresterni
249
Lampada per interni ad incasso a LED.Corpo in pressofusione di alluminio verniciato in colore grigio. Sorgente luminosa costituita da 1 LED da 1,2W 350mA ad alta resa. Schermo dif-fusore sabbiato per la diffusione uniforme della luce, che consente volendo l’inserimento di un logo o di un’immagine, completa di molle per il fissaggio. Il fissaggio avviene tramite molle, alimentatore esterno (non compreso). Grado di protezione IP40.
Lamp for interior usewith LED recessed spot.With die-casted grey painted aluminum body. Light source 1 LED 1,2W 350mA high emission. Frosted screen for even light, available with logo or image as option, complete of fastener springs. The fixing happens through springs, re-mote LED driver (not included). IP40.
disegni tecnici/technical drawings
daf 04alluminio
daf 04 aluminum
applicazioni/applicationsRetroilluminazione loghi e segnalazione./Logos back-lighting and path marking.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MDAFS1010300AA
colore/colour
cool white
tipo/type
interni/
interior
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
IP/IP
40
accessori/accessories
kit pittogrammi/
pictograms kit
fissaggio/fixing
con molle/
with springs
accessori/accessoriesKit MDAFPITTOKIT07 composto da 7 pittogrammi (non inclusi p.334)
Kit MDAFPITTOKIT07 composed by 7 pictograms (not included p.334)
90
90
22
72
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
1383-1212/
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
alimentatori/LED drivers
WALIMLED 01350WALIMLED 03350WALIMLED 08350WALIMLED 12350WALIM/DIMM/JOLLYWBOKVAR
1,4W - 350mA - 34x32x25 (h)4W - 350mA - 43x41x23 (h)10W - 350mA - 100x40x27 (h)15W - 350mA - 122x38x28 (h)15W - 350mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
interiorinterni
Ta max 35°CIP40 1,2W
250
Lampada per interni ad incasso a LED. Corpo in pressofusione di alluminio verniciato in colore grigio. Sorgente luminosa costituita da 1 LED da 1,2W 350mA ad alta resa. Schermo dif-fusore sabbiato per la diffusione uniforme della luce, completa di molle per il fissaggio. Il fissag-gio avviene tramite molle, alimentatore esterno (non compreso). Grado di protezione IP40.
Lamp for interior usage withLED recessed spot.Die-casted grey painted aluminum body. Light source 1 LED 1,2W 350mA high emission. Frosted screen for an even light effect, complete of fastener springs. Fixing through springs, remote driver (not included). IP40.
daf 05alluminio
daf 05 aluminum
d - zona non illuminata /dark area
d
h
90
90
22
72
disegni tecnici/technical drawings
illuminamento/illumination
h (m) E (lx) D (cm)
0.25
0.50
0.75
1.00
220
55
24
14
/
/
/
/
bianco freddo/cool white
Ta max 35°CIP40 1,2W
251
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MDAF01010300AA
colore/colour
cool white
tipo/type
interni/
interior
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
IP/IP
40
fissaggio/fixing
con molle/
with springs
applicazioni/applicationsIlluminazione di scalee di segnalazione./Stairs lighting, path marking.
*Esempio schemi di collegamento a p.342
Example of wiring diagram on p.342
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
1
3
8
3-12
12
/
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21(h) - dimm.
variatore/dimmer 1-10V
interiorinterni
252
kobivetro opalino
kobi opal glass
Lampada cubetto a LED.Lampada in vetro opalino. Crea una luce diffusa e d’ambiente. La sorgente è costituita da 1 LED 1,2W 350 mA ad alta resa che può essere fornito in diversi colori. L’alimentatore (non compreso) è esterno. Grado di protezione IP40.
Cube lamp with LED.Lamp in opal glass. It creates a diffusing lighting athmosphere. Source with 1 LED 1,2W 350 mA high emission available in different colours.Remote LED driver (not included). IP40.
disegni tecnici/technical drawings
45
42
42
Ta max 35°CIP40 1,2W
253
applicazioni/applicationsIlluminazione d’effetto, decorazione, locali pubblici. Indicata per creare composizioni sulla parete, o semplicemente per creare l’indicazione di percorsi, o come lampada di cortesia./Light effects, decoration and public spaces. Suitable to create wall lighting effects or as a sign lighting.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
MKOBQ4010500AA
MKOBQ4010501AA
colore/colour
cool white*
blu/blue*
tipo/type
interni/
interior
interni
interior
LED/LED
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
vetro opalino/
opal glass
vetro opalino/
opal glass
ottica/optic
fissa/
fixed
fissa/
fixed
fissaggio/fixing
a parete/
wall
a parete/
wall
IP/IP
40
40
*Disponibile con LED a luce calda o colorata su richiesta. / Warm white LED or coloured LED on demand.
*Esempio schemi di collegamento a p.342
Example of wiring diagram on p.342
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
1
3
8
3-12
12
/
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21(h) - dimm.
variatore/dimmer 1-10V
interior / decorativeinterni / decorativo
254
Lampada quadrata a LED.Corpo in pressofusione in alluminio, dotata di schermo opalino che permette una diffusione uniforme della luce. Il prodotto è indicato per l’utilizzo in interni e può essere applicato come indicazione di percorsi, o come elemento di segnalazione (ad esempio per i numeri di stan-za negli Hotel) applicando semplicemente una serigrafia adesiva sulla superficie luminosa. La sorgente è costituita da 1 LED da 1,2W 350mA ad alta resa. L’alimentatore (non compreso) è esterno. Grado di protezione IP40.
Square lamp with LED. Die-casted aluminum with opal screen for diffused and even light. Interior lamp for sign lighting (for example the room numbers in an hotel) adding a silk-screen process adhesive. Source composed with 1 LED 1,2W 350mA high emission. Remote LED driver (not included). IP40.
disegni tecnici/technical drawings
ololux-Qalluminio
ololux-Q aluminum
applicazioni/applications
Retroilluminazione loghi e segnalazione./Logos back-lighting and path marking.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MOLOQ4010300AA
colore/colour
cool white
tipo/type
interni/
interior
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
fascio ottico/beam angle
diffuso/
diffused
IP/IP
40
fissaggio/fixing
a parete/
wall
74
70
102
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
1
3
8
3-12
12
/
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 122x38x28 (h)
15W - 350mA - 138x39x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
Ta max 35°CIP40 1,2W
255
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
1
3
8
3-12
12
/
WALIMLED 01350
WALIMLED 03350
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
1,4W - 350mA - 34x32x25 (h)
4W - 350mA - 43x41x23 (h)
10W - 350mA - 122x38x28 (h)
15W - 350mA - 138x39x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
*Esempio schemi di collegamento a p.342/ Example of wiring diagram on p.342
Lampada tonda a LED.Corpo in pressofusione in alluminio, dotata di schermo opalino che permette una diffusione uniforme della luce. Il prodotto è indicato per l’utilizzo in interni e può essere applicato come indicazione di percorsi, o come elemento di segnalazione (ad esempio per i numeri di stan-za negli Hotel) applicando semplicemente una serigrafia adesiva sulla superficie luminosa. La sorgente è costituita da 1 LED da 1,2W 350mA ad alta resa. L’alimentatore (non compreso) è esterno. Grado di protezione IP40.
Round lamp with LED. Die-casted aluminum with opal screen for diffused and even light. Interior lamp for sign lighting (for example the room numbers in an hotel) adding a silk-screen process adhesive. Source composed with 1 LED 1,2W 350mA high emission. Remote LED driver (not included). IP40.
disegni tecnici/technical drawings
ololux-Talluminio
ololux-T aluminum
applicazioni/applications
Retroilluminazione loghi e segnalazione./Logos back-lighting and path marking.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
MOLOT4010300AA
colore/colour
cool white
tipo/type
interni/
interior
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
ottica/optic
fissa/
fixed
fascio ottico/beam angle
diffuso/
diffused
IP/IP
40
fissaggio/fixing
a parete/
wall
74
70
102
Ta max 35°CIP40 1,2W
interiorinterni
258
appendiabiti LEDalluminio anodizzato
LED dresshanger anodized aluminum
Modulo appendiabiti a LED per interni. Corpo in profilo di alluminio estruso anodizzato, completo di ghiere di fissaggio anch’esse di al-luminio anodizzato. La sorgente è costituita da nastro LED 12V a media emissione con scher-mo di protezione. Disponibile nelle lunghezze: 60, 120, 180, 240 cm con uno o due sostegni in alluminio e alimentatore esterno compreso.N.B.: È possibile tagliare l’estruso in base alle proprie esigenze di montaggio. Il sistema inter-no a LED è modulare e può essere riposizionato ogni 5 cm per poter essere centrato rispetto all’estruso.
LED dresshanger with LED for interior use.Anodized aluminum profile with fixing aluminum end-caps. The source is composed from medium emission LED strip 12V and protection screen. Supplied in lengths: 60, 120, 180, 240 cm with one or two aluminum supports. Remote LED driver, included.NOTICE: The profile can be cut in accordance with the desired length. The interior system is modular and can be placed every 5 cm, starting from the middle of the profile.
disegni tecnici/technical drawings
accessori/accessoriesGhiere (alluminio anodizzato, ottone satinato)/ Sostegno centrale (alluminio anodizzato) p.336.
End-caps (anodized aluminum, frosted brass)/ Central support (anodized aluminum) p.336.
alluminio anodizzatoanodized aluminum
grigio anticoantique grey
ottone satinatosanded brass
ottone lucidopolished brass
50614/1214/1814/2414
estruso/profile 600/1200/1800/2400
Ta max 35°CIP40
259
applicazioni/applicationsArmadi, cabine armadio, spogliatoi, negozi di abbigliamento./In furniture, built-in wardrobes, dressing-rooms and shops.
prodotto/product
codice/code
GAPLED060AA
GAPLED060GR
GAPLED0600S
GAPLED0600L
GAPLED120AA
GAPLED120GR
GAPLED1200S
GAPLED1200L
GAPLED180AA
GAPLED180GR
GAPLED1800S
GAPLED240AA
GAPLED240GR
GAPLED2400S
colore/colour
cool white
cool white
cool white
cool white
cool white
cool white
cool white
cool white
cool white
cool white
cool white
cool white
cool white
cool white
tipo/type
interni/ interior
interni/ interior
interni/ interior
interni/ interior
interni/ interior
interni/ interior
interni/ interior
interni/ interior
interni/ interior
interni/ interior
interni/ interior
interni/ interior
interni/ interior
interni/ interior
potenza/power
2,7 W
2,7 W
2,7 W
2,7 W
5,4 W
5,4 W
5,4 W
5,4 W
8,1 W
8,1 W
8,1 W
10,8 W
10,8 W
10,8 W
tipo di LED/LED type
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
materiale/material
alluminio anodizzato/anodized aluminum
grigio antico/antique grey
ottone satinato/sanded brass
ottone lucido/polished brass
alluminio anodizzato/anodized aluminum
grigio antico/antique grey
ottone satinato/sanded brass
ottone lucido/polished brass
alluminio anodizzato/anodized aluminum
grigio antico/antique grey
ottone satinato/sanded brass
alluminio anodizzato/anodized aluminum
grigio antico/antique grey
ottone satinato/sanded brass
accessori/accessories
ghiere/end-caps
ghiere/end-caps
ghiere/end-caps
ghiere/end-caps
ghiere/ sostegno centrale/end-caps/ central support
ghiere/ sostegno centrale/end-caps/ central support
ghiere/ sostegno centrale/end-caps/ central support
ghiere/ sostegno centrale/end-caps/ central support
ghiere/ sostegno centrale/end-caps/ central support
ghiere/ sostegno centrale/end-caps/ central support
ghiere/ sostegno centrale/end-caps/ central support
ghiere/ sostegno centrale/end-caps/ central support
ghiere/ sostegno centrale/end-caps/ central support
ghiere/ sostegno centrale/end-caps/ central support
fissaggio/fixing
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
tramite ghiere/with end-caps
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
tabella di riepilogo prodotti/ product overview table
*Esempio schemi di collegamento a p.347/ Example of wiring diagram on p.347
*codice/codenon inclusi/not included
*codice/codenon inclusi/not included
caratteristiche/specifications
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
WALIM/DIMM/JOLLY
WBOKVAR
WBOKOTDIM
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
10W - 12V - 103x67x21 (h) - dimm.
variatore/dimmer 1- 10V
dimmer (50W max ) necessita di alimentatore/ needs driver
interiorinterni
260
Sistema di segnalazione a LEDper interni.Corpo in profilo di alluminio estruso anodizza-to completo di testatine di chiusura con guar-nizione. I profili sono collegabili ed hanno una lunghezza di 190 cm. La sorgente è costituita da 4 barrette, ciascuna contenente 32 LED a media emissione collegate tra loro, con uno schermo di protezione trasparente. Il fissag-gio avviene tramite una staffa rapida in metallo (BWALKSTAFFA). Alimentatore esterno, esclu-so. A richiesta, il Walk System 01 può essere fornito in una versione predisposta per ottenere effetti di luce in movimento, utilizzando una ap-posita centralina di controllo. Questo sistema è particolarmente indicato per applicazioni di se-gnalazione luminosa.
Signal system with LED for interior use.Anodized aluminum profile with end caps with gaskets. Profiles can be jointed and their length is 190 cm. The source is composed from 4 bars, each bar contains 32 LED medium emission, with a clear protection screen. Fixing with a metal fast bracket (BWALKSTAFFA). Remote LED driver, not included. On request, Walk System 01 can be supplied with a system for the movement of the light, thanks to the special control. This system is especially used for signal light.
walk system LED 01alluminio anodizzato
walk system LED 01 anodized aluminum
disegni tecnici/technical drawings
accessori/accessoriesStaffa di fissaggio BWALKSTAFFA p.337/ Profili vuoti p.337/ Giunto di alimentazione p.337 (non inclusi)
Fixing bracket BWALKSTAFFA p.337/ Recessed profile p.337/ Feeding joint p.337 (not included)
1900
60
2,5
20
50alimentazione interna/internal feeding joint
Ta max 35°CIP44
261
applicazioni/applicationsSegnalazione di percorsi e superfici, ostacoli./Path marking and graze lighting.
*Esempio schemi di collegamento a p.347
Example of wiring diagram on p.347
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BWALKLED1900W
BWALKLED1900Y
BWALKLED1900R
colore/colour
cool white
giallo/yellow
rosso/red
tipo/type
interni/
interior
interni
interior
interni
interior
LED/LED
128
(16W)
128
(16W)
128
(16W)
tipo di LED/LED type
media emissione/
medium emission
media emissione/
medium emission
media emissione/
medium emission
materiale/material
alluminio anodizzato/
anodized aluminum
alluminio anodizzato/
anodized aluminum
alluminio anodizzato/
anodized aluminum
accessori/accessories
staffa/ profili/ giunto
bracket/ profile/ joint
staffa/ profili/ giunto
bracket/ profile/ joint
staffa/ profili/ giunto
bracket/ profile/ joint
fissaggio/fixing
a parete tramite staffe/
wall with brackets
a parete tramite staffe/
wall with brackets
a parete tramite staffe/
wall with brackets
IP/IP
44
44
44
interiorinterni
262
Sistema di segnalazione a LED da incasso per interni.Corpo in profilo di alluminio estruso anodizza-to completo di molle di fissaggio. I profili sono collegabili ed hanno una lunghezza di 190 cm. La sorgente è costituita da 4 barrette, ciascu-na contenente 32 LED a media emissione col-legate tra loro, con uno schermo di protezione trasparente. Alimentatore esterno, escluso. A richiesta, il Walk System 01 può essere fornito in una versione predisposta per ottenere effetti di luce in movimento, utilizzando una apposita centralina di controllo. Questo sistema è parti-colarmente indicato per applicazioni di segna-lazione luminosa.
Signal system with LED for interior use.Anodized aluminum profile with end caps with gaskets. Profiles can be jointed and their length is 190 cm. The source is composed from 4 bars, each bar contains 32 LED medium emission, with a clear protection screen. Remote LED driver, not included. On request, Walk System 01 can be supplied with a system for the movement of the light, thanks to a special control. This system is especially used for signal light.
walk system LED 01 incassoalluminio anodizzato
walk system LED 01 recessed anodized aluminum
disegni tecnici/technical drawings
accessori/accessoriesProfili vuoti p.337/ Giunto di alimentazione p.337 (non inclusi)
Recessed profile p.337/ Feeding joint p.337 (not included)
50
1900 18
25 31,5
Ta max 35°CIP40
alimentazione interna/internal feeding joint
263
applicazioni/applicationsSegnalazione di percorsi e superfici, ostacoli./Path marking and graze lighting.
*Esempio schemi di collegamento a p.347
Example of wiring diagram on p.347
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BWALKLED/R1900W
BWALKLED/R1900Y
BWALKLED/R1900R
colore/colour
cool white
giallo/yellow
rosso/red
tipo/type
interni/
interior
interni
interior
interni
interior
LED/LED
128
(16W)
128
(16W)
128
(16W)
tipo di LED/LED type
media emissione/
medium emission
media emissione/
medium emission
media emissione/
medium emission
accessori/accessories
profili/ giunto
profile/ joint
profili/ giunto
profile/ joint
profili/ giunto
profile/ joint
fissaggio/fixing
tramite molle (incluse)/
with springs (included)
tramite molle (incluse)/
with springs (included)
tramite molle (incluse)/
with springs (included)
IP/IP
40
40
40
materiale/material
alluminio anodizzato/
anodized aluminum
alluminio anodizzato/
anodized aluminum
alluminio anodizzato/
anodized aluminum
interiorinterni
264
Sistema di segnalazione a LED per interni.Corpo in profilo di alluminio estruso anodizza-to completo di testatine di chiusura con guar-nizione. I profili sono collegabili ed hanno una lunghezza di 105, 200, 300 cm. La sorgente è costituita da moduli LED a media emissione, con uno schermo di protezione trasparente. Il fissaggio avviene tramite una staffa rapida in metallo (BWALKSTAFFA). Alimentatore esterno, escluso.N.B.: È possibile tagliare l’estruso in base alle proprie esigenze di montaggio. Il sistema inter-no a LED è modulare e può essere riposizionato ogni 5cm a seconda delle tipologie per poter essere centrato rispetto all’estruso.
Signal system with LED for interior use. Anodized aluminum profile with end caps with gaskets. Profiles can be jointed. Lengths are 105, 200, 300 cm. The source is modular LED medium emission, with a clear protection screen. Fixing with a metal fast bracket (BWALKSTAFFA). Remote LED driver, not included.NOTICE: The profile can be cut in accordance with the desired length. The internal system is modular and it can be placed every 5cm, starting from the middle of the profile.
walk system LED 02alluminio anodizzato
walk system LED 02anodized aluminum
disegni tecnici/technical drawings
accessori/accessoriesStaffa di fissaggio BWALKSTAFFA p.337/ Profili vuoti p.337/ Giunto di alimentazione p.337 (non inclusi)
Fixing bracket BWALKSTAFFA p.337/ Recessed profile p.337/ Feeding joint p.337 (not inclded)
1050 / 2000 / 3000
60
2,5
20
50
Ta max 35°CIP44
alimentazione interna/internal feeding joint
265
prodotto/product
codice/code
BWALKLED1050W
BWALKLED2000W
BWALKLED3000W
BWALKLED1050Y
BWALKLED2000Y
BWALKLED3000Y
BWALKLED1050G
BWALKLED2000G
BWALKLED3000G
BWALKLED1050B
BWALKLED2000B
BWALKLED3000B
BWALKLED1050R
BWALKLED2000R
BWALKLED3000R
colore/colour
cool white
cool white
cool white
giallo/ yellow
giallo/ yellow
giallo/ yellow
verde/ green
verde/ green
verde/ green
blu/ blue
blu/ blue
blu/ blue
rosso/ red
rosso/ red
rosso/ red
tipo/type
interni/ interiorL=105 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=105 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=105 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=105 cm
interni/ interiorL=200 cm
nterni/ interiorL=300 cm
interni/ interiorL=105 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
potenza/power
4,7 W
9 W
13,5 W
4,7 W
9 W
13,5 W
4,7 W
9 W
13,5 W
4,7 W
9 W
13,5 W
4,7 W
9 W
13,5 W
tipo di LED/LED type
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
accessori/accessories
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
staffa/ profili/ giuntobracket/ profile/ joint
fissaggio/fixing
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
IP/IP
44
44
44
44
44
44
44
44
44
44
44
44
44
44
44
tabella di riepilogo prodotti/ product overview table
*Esempio schemi di collegamento a p.347 /Example of wiring diagram on p.347
*codice/codenon inclusi/not included
*codice/codenon inclusi/not included
caratteristiche/specifications
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
WALIM/DIMM/JOLLY
WBOKVAR
WBOKOTDIM
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
10W - 12V - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
dimmer (50W max) necessita di alimentatore/ needs driver
applicazioni/applicationsSegnalazione di percorsi e superfici, ostacoli./Path marking and graze lighting.
interiorinterni
266
Sistema di segnalazione a LED da incasso per interni.Corpo in profilo di alluminio anodizzato estru-so completo di molle di fissaggio. I profili sono collegabili ed hanno una lunghezza di 105, 200, 300 cm. La sorgente è costituita da moduli LED a media emissione, con uno schermo di protezione trasparente. Alimentatore esterno, escluso.N.B.: È possibile tagliare l’estruso in base alle proprie esigenze di montaggio. Il sistema inter-no a LED è modulare e può essere riposizionato ogni 5 cm a seconda delle tipologie per poter essere centrato rispetto all’estruso.
Signal system with LED for interior use. Anodized aluminum profile with fixing springs. Profiles can be jointed. Lengths are 105, 200, 300 cm. The source is composed from modular LED medium emission, with a clear protection screen. Remote LED driver, not included. NOTICE: The profile can be cut in accordance with the desired length. The interior system is modular and can be placed every 5 cm, starting from the middle of the profile.
walk system LED 02 incassoalluminio anodizzato
walk system LED 02 recessed anodized aluminum
disegni tecnici/technical drawings
accessori/accessoriesProfili vuoti p.337/ Giunto di alimentazione p.337 (non inclusi)
Recessed profile p.337/ Feeding joint p.337 (not included)
50
18
25 31,5
1050 / 2000 / 3000
Ta max 35°CIP40
alimentazione interna/internal feeding joint
267
prodotto/product
codice/code
BWALKLED/R1050W
BWALKLED/R2000W
BWALKLED/R3000W
BWALKLED/R1050Y
BWALKLED/R2000Y
BWALKLED/R3000Y
BWALKLED/R1050G
BWALKLED/R2000G
BWALKLED/R3000G
BWALKLED/R1050B
BWALKLED/R2000B
BWALKLED/R3000B
BWALKLED/R1050R
BWALKLED/R2000R
BWALKLED/R3000R
colore/colour
cool white
cool white
cool white
giallo/ yellow
giallo/ yellow
giallo/ yellow
verde/ green
verde/ green
verde/ green
blu/ blue
blu/ blue
blu/ blue
rosso/ red
rosso/ red
rosso/ red
tipo/type
interni/ interiorL=105 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=105 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=105 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=105 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=105 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
potenza/power
4,7 W
9 W
13,5 W
4,7 W
9 W
13,5 W
4,7 W
9 W
13,5 W
4,7 W
9 W
13,5 W
4,7 W
9 W
13,5 W
tipo di LED/LED type
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
accessori/accessories
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
profili/ giuntoprofile/ joint
fissaggio/fixing
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
tabella di riepilogo prodotti/ product overview table
*Esempio schemi di collegamento a p.347/Example of wiring diagram on p.347
*codice/codenon inclusi/not included
*codice/codenon inclusi/not included
caratteristiche/specifications
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
WALIM/DIMM/JOLLY
WBOKVAR
WBOKOTDIM
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
applicazioni/applicationsSegnalazione di percorsi e superfici, ostacoli./Path marking and graze lighting.
240W - 12V - 193x163x50 (h)
10W - 12V - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
dimmer (50W max) necessita di alimentatore/ needs driver
interiorinterni
268
Sistema di illuminazione a LED per interni.Corpo in profilo di alluminio estruso anodizza-to completo di testatine di chiusura con guar-nizione. I profili sono collegabili ed hanno una lunghezza di 100, 200, 300 cm. La sorgente è costituita da nastro LED HP 24V DC ad alta emissione, con uno schermo di protezione tra-sparente. Il fissaggio avviene tramite una staffa rapida in metallo (BWALKSTAFFA) non inclusa. Alimentatore esterno, escluso. IP44.N.B.: È possibile tagliare l’estruso in base alle proprie esigenze di montaggio. Il sistema inter-no a LED è modulare e può essere riposizionato ogni 7,5 cm a seconda delle tipologie per poter essere centrato rispetto all’estruso.
Lighting system with LED for interior use.Anodized aluminum profile with end caps with gaskets. Profiles can be jointed. Lengths are 100, 200, 300 cm. The source is LED strip HP 24V DC, with a clear protection screen. Fixing with a metal fast bracket (BWALKSTAFFA) not included. Remote LED driver, not included. IP44.NOTICE: The profile can be cut in accordance with the desired length. The internal system is modular and it can be placed every 7,5 cm, starting from the middle of the profile.
walk system LED HPalluminio anodizzato
walk system LED HPanodized aluminum
accessori/accessoriesStaffa di fissaggio BWALKSTAFFA p.337/ Profili vuoti p.337/ Giunto di alimentazione p.337 (non inclusi)
Fixing bracket BWALKSTAFFA p.337/ Recessed profile p.337/ Feeding joint p.337 (not inclded)
disegni tecnici/technical drawings
1000 / 2000 / 3000
60
2,5
20
50
Ta max 35°CIP44
alimentazione interna/internal feeding joint
illuminamento/illumination
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
800
200
89
50
115
229
344
458
bianco neutro/neutral white
269
applicazioni/applicationsIlluminazione di piccole teche, effetti di luce./Decorative lighting, small showcases lighting, light effects.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BWALKHP1000W
BWALKHP2000W
BWALKHP3000W
BWALKHP1000N
BWALKHP2000N
BWALKHP3000N
colore/colour
warm white
warm white
warm white
neutral white
neutral white
neutral white
tipo/type
interni/
interior
interni/
interior
interni/
interior
interni/
interior
interni/
interior
interni/
interior
LED/LED
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
potenzapower
L=100cm/
16W
L=200cm/
32W
L=300cm/
48W
L=100cm/
16W
L=200cm/
32W
L=300cm/
48W
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
accessori/accessories
staffe/ profili/ giunto/
brackets/ profile/ joint
staffe/ profili/ giunto/
brackets/ profile/ joint
staffe/ profili/ giunto/
brackets/ profile/ joint
staffe/ profili/ giunto/
brackets/ profile/ joint
staffe/ profili/ giunto/
brackets/ profile/ joint
staffe/ profili/ giunto/
brackets/ profile/ joint
fissaggio/fixing
con staffe/
with brackets
con staffe/
with brackets
con staffe/
with brackets
con staffe/
with brackets
con staffe/
with brackets
con staffe/
with brackets
IP/IP
44
44
44
44
44
44
*Esempio schemi di collegamento a p.348 /Example of wiring diagram on p.348
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIM/DIMM/JOLLY
WBOKVAR
WBOKOTDIM
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
20W - 24V - 103x67x29 (h) - dimm.
variatore/dimmer 1-10V
dimmer (120W max) necessita di alimentatore/ needs driver
interiorinterni
270
Sistema di illuminazione a LED da incas-so per interni.Corpo in profilo di alluminio estruso anodizza-to completo di molle di fissaggio. I profili sono collegabili ed hanno una lunghezza di 100, 200, 300 cm. La sorgente è costituita da nastro LED HP 24V DC ad alta emissione, con uno scher-mo di protezione trasparente. Il fissaggio avvie-ne tramite molle incluse. Alimentatore esterno, escluso. IP40.N.B.: È possibile tagliare l’estruso in base alle proprie esigenze di montaggio. Il sistema inter-no a LED è modulare e può essere riposizionato ogni 7,5 cm a seconda delle tipologie per poter essere centrato rispetto all’estruso.
Lighting recessed system with LEDfor interior use.Anodized aluminum profile with fixing springs. Profiles can be jointed. Lengths are 100, 200, 300 cm. The source is LED strip HP 24V DC, with a clear protection screen. Fixing with springs. Remote LED driver, not included. IP40.NOTICE: The profile can be cut in accordance with the desired length. The internal system is modular and it can be placed every 7,5 cm, starting from the middle of the profile.
walk system LED HP incassoalluminio anodizzato
walk system LED HP recessedanodized aluminum
Ta max 35°CIP40
disegni tecnici/technical drawings
50
18
25 31,5
1000 / 2000 / 3000
alimentazione interna/internal feeding joint
accessori/accessoriesProfili vuoti p.337/ Giunto di alimentazione p.337 (non inclusi)
Recessed profile p.337/ Feeding joint p.337 (not included)
illuminamento/illumination
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
800
200
89
50
115
229
344
458
bianco neutro/neutral white
271
prodotto/product
tabella di riepilogo prodotti/ product overview table
colore/colour
warm white
warm white
warm white
neutral white
neutral white
neutral white
tipo/type
interni/
interior
interni
interior
interni
interior
interni/
interior
interni
interior
interni
interior
LED/LED
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
potenzapower
L=100cm/
16W
L=200cm/
32W
L=300cm/
48W
L=100cm/
16W
L=200cm/
32W
L=300cm/
48W
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
accessori/accessories
profili/ giunto/ profile/ joint
profili/ giunto/ profile/ joint
profili/ giunto/ profile/ joint
profili/ giunto/ profile/ joint
profili/ giunto/ profile/ joint
profili/ giunto/ profile/ joint
*Esempio schemi di collegamento a p.348 /Example of wiring diagram on p.348
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIM/DIMM/JOLLY
WBOKVAR
WBOKOTDIM
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
20W - 24V - 103x67x29 (h) - dimm.
variatore/dimmer 1-10V
dimmer (120W max) necessita di alimentatore/ needs driver
fissaggio/fixing
con molle (incluse)/
with springs (included)
con molle (incluse)/
with springs (included)
con molle (incluse)/
with springs (included)
con molle (incluse)/
with springs (included)
con molle (incluse)/
with springs (included)
con molle (incluse)/
with springs (included)
IP/IP
40
40
40
40
40
40
applicazioni/applicationsIlluminazione di piccole teche, effetti di luce./Decorative lighting, small showcases lighting, light effects.
codice/code
BWALKHP/R1000W
BWALKHP/R2000W
BWALKHP/R3000W
BWALKHP/R1000N
BWALKHP/R2000N
BWALKHP/R3000N
interiorinterni
272
Sistema di illuminazione a LED daincasso per interni.Corpo in profilo di alluminio estruso anodizza-to completo di molle di fissaggio. I profili sono collegabili ed hanno una lunghezza di 100, 200, 300 cm. La sorgente è costituita da nastro LED HP 24V DC ad alta emissione, con uno scher-mo di protezione opalino. Il fissaggio avviene tramite molle incluse. Alimentatore esterno, escluso. IP40.N.B.: È possibile tagliare l’estruso in base alle proprie esigenze di montaggio. Il sistema inter-no a LED è modulare e può essere riposizionato ogni 7,5 cm a seconda delle tipologie per poter essere centrato rispetto all’estruso.
Lighting recessed system with LED forinterior use.Anodized aluminum profile with fixing springs. Profiles can be jointed. Supplied lengths are 100, 200, 300 cm. The source is LED strip HP 24V DC, with a opal protection screen. Fixing with springs. Remote LED driver, not included. IP40.NOTICE: The profile can be cut in accordance with the desired length. The internal system is modular and it can be placed every 7,5 cm, starting from the middle of the profile.
walk system LED HP opalalluminio anodizzato
walk system LED HP opalanodized aluminum
Ta max 35°CIP40
disegni tecnici/technical drawings
50
18
25 31,5
1000 / 2000 / 3000
alimentazione interna/internal feeding joint
accessori/accessoriesProfili vuoti p.337/ Giunto di alimentazione p.337 (non inclusi)
Recessed profile p.337/ Feeding joint p.337 (not included)
273
applicazioni/applicationsIlluminazione decorativa, effetti di luce./Decorative lighting, light effects.
prodotto/product
tabella di riepilogo prodotti/ product overview table
*Esempio schemi di collegamento a p.348 /Example of wiring diagram on p.348
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIM/DIMM/JOLLY
WBOKVAR
WBOKOTDIM
colore/colour
warm white
warm white
warm white
neutral white
neutral white
neutral white
tipo/type
interni/
interior
interni
interior
interni
interior
interni/
interior
interni
interior
interni
interior
LED/LED
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
nastro LED/
LED strip
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
potenzapower
L=100cm/
16W
L=200cm/
32W
L=300cm/
48W
L=100cm/
16W
L=200cm/
32W
L=300cm/
48W
ottica/optic
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
fissa/
fixed
accessori/accessories
profili/ giunto/ profile/ joint
profili/ giunto/ profile/ joint
profili/ giunto/ profile/ joint
profili/ giunto/ profile/ joint
profili/ giunto/ profile/ joint
profili/ giunto/ profile/ joint
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
20W - 24V - 103x67x29 (h) - dimm.
variatore/dimmer 1-10V
dimmer (120W max) necessita di alimentatore/ needs driver
fissaggio/fixing
con molle (incluse)/
with springs (included)
con molle (incluse)/
with springs (included)
con molle (incluse)/
with springs (included)
con molle (incluse)/
with springs (included)
con molle (incluse)/
with springs (included)
con molle (incluse)/
with springs (included)
IP/IP
40
40
40
40
40
40
interiorinterni
codice/code
BWALKHP/R1000WOP
BWALKHP/R2000WOP
BWALKHP/R3000WOP
BWALKHP/R1000NOP
BWALKHP/R2000NOP
BWALKHP/R3000NOP
274
disegni tecnici/technical drawings
illuminamento/illumination
0.50
1.00
1.50
2.00
800
200
89
50
115
229
344
458
h (m) E (lx) D (cm)
nickname design Studio ARUPalluminio anodizzato
nickname anodized aluminum
applicazioni/applicationsSegnalazione di percorsi e superfici, ostacoli./Path marking and graze lighting.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BWALKHP/R1000WIP
BWALKHP/R2000WIP
BWALKHP/R3000WIP
BWALKHP/R1000NIP
BWALKHP/R2000NIP
BWALKHP/R3000NIP
colore/colour
warm white
warm white
warm white
neutral white
neutral white
neutral white
tipo/type
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
interni/esterni/interior/outdoor
LED/LED
nastro LED/LED strip
nastro LED/LED strip
nastro LED/LED strip
nastro LED/LED strip
nastro LED/LED strip
nastro LED/LED strip
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
potenza/power
L=100cm/ 16W
L=200cm/ 32W
L=300cm/ 48W
L=100cm/ 16W
L=200cm/ 32W
L=300cm/ 48W
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
IP/IP
65
65
65
65
65
65
bianco freddo/cool white
Sistema di illuminazione a LED da incasso per interni/ esterni.Corpo in profilo di alluminio estruso anodizzato.I profili hanno una lunghezza di 100, 200, 300 cm. La sorgente è costituita da nastro LED HP 24V DC ad alta emissione, con uno schermo di protezione trasparente. Alimentatore esterno escluso. IP65.
Lighting recessed system with LED forinterior/outdoor use.Anodized aluminum profile. Supplied lengths are 100, 200, 300 cm. The source is LED strip HP 24V DC, with a clear protection screen. Remote LED driver, not included. IP65.
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
20W - 24V - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
dimmer (120W max) necessita di alimentatore/ needs driver
Ta min -20°CTa max 35°CIP65
*codice/codenon inclusi/not included
caratteristiche/specifications
*Esempio schemi di collegamento a p.348/ Example of wiring diagram on p.348
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
WALIM/DIMM/JOLLY
WBOKVAR
WBOKOTDIM
50
18
25 31,5
1000 / 2000 / 3000
outdooresterni
275
Sistema di illuminazione a LED da incas-so per interni.Corpo in profilo di alluminio anodizzato estru-so, completo di molle di fissaggio. I profili han-no una lunghezza di 60 o 120 cm. La sorgente è costituita da 6 o 12 LED 1,2W 350 mA ad alta emissione con fascio ottico da 110°, con uno schermo di protezione trasparente (scher-mo sabbiato su richiesta). Alimentatore esterno escluso.
Signal system with LED for interior use.Anodized aluminum profile with end caps with fixing springs gaskets. Profiles are in lengths of 60 or 120 cm. The source is composed from 6 or 12 LED 1,2W 350mA high emission, 110° beam angle and clear protection screen (frosted protection screen on demand). Remote LED driver, not included.
disegni tecnici/technical drawings
fascio ottico/beam angle
110°
walk system LED 03 incassoalluminio anodizzato
walk system LED 03 recessedanodized aluminum
d
applicazioni/applicationsIlluminazione di ripiani e librerie./Shelves and bookcases lighting.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BWALKLED06X1/0
BWALKLED06X1/W
BWALKLED012X1/0
BWALKLED012X1/W
colore/colour
cool white
warm white
cool white
warm white
tipo/type
interni/interiorL=60 cm
interni/interiorL=60 cm
interni/interiorL=120 cm
interni/interiorL=120 cm
LED/LED
06
06
12
12
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
fascio ottico/beam angle
110°
110°
110°
110°
fissaggio/fixing
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
IP/IP
40
40
40
40
accessori/accessories
profili/profile
profili/profile
profili/profile
profili/profile
18
25 31,5
600 / 1200
accessori/accessoriesProfili vuoti p.337 (non inclusi)
Recessed profile p.337 (not included)
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
6 LED
12 LED
12 LED
/
alimentatori/LED drivers
WALIMLED 08350
WALIMLED 12350
WALIM/DIMM/JOLLY
WBOKVAR
10W - 350mA - 100x40x27 (h)
15W - 350mA - 122x38x28 (h)
15W - 350mA - 103x67x21 (h) - dimm.
variatore/dimmer 1-10V
6x1,2W12x1,2W Ta max 35°CIP40
interiorinterni
276
applicazioni/applicationsSegnalazione di percorsi e superfici.N.B. In caso di montaggio all’esterno, predisporre una scatolastagna per l’alloggiamento dell’alimentatore./Path marking and graze lighting.NOTICE: in case of outdoor installation, put the feeder in a waterproof box.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BWALKIP671000W
BWALKIP672000W
BWALKIP673000W
colore/colour
cool white
cool white
cool white
tipo/type
esterni/outdoorL=100 cm
esterni/outdoorL=200 cm
esterni/outdoorL=300 cm
LED/LED
3,6W
7,2W
10,8W
tipo di LED/LED type
nastro media emissione/medium emission strip
nastro media emissione/medium emission strip
nastro media emissione/medium emission strip
materiale/material
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
fissaggio/fixing
con staffe/with brackets
con staffe/with brackets
con staffe/with brackets
IP/IP
67
67
67
accessori/accessories
staffe/ profili/ giunto/brackets/ profile/ joint
staffe/ profili/ giunto/brackets/ profile/ joint
staffe/ profili/ giunto/brackets/ profile/ joint
accessori/accessoriesStaffa di fissaggio p.337/ Profili vuoti p.337/Giunto di alimentazione / Tappo terminale (non inclusi)
Fixing bracket p.337/ Recessed profile p.337/Feeding joint / End-cap (not included)
*Esempio schemi di collegamento a p.347/ Example of wiring diagram on p.347
Sistema di segnalazione a LEDper interni/esterni.Corpo in profilo di alluminio anodizzato estruso completo di testatine di chiusura con guarnizio-ne. I profili sono collegabili con lunghezza di 100, 200, 300 cm. Sorgente: nastro LED a media emissione in materiale sintetico. Fissaggio tra-mite una staffa rapida in metallo (BWALKSTAF-FA). Alimentatore esterno, escluso. IP67. N.B.: È possibile tagliare l’estruso in base alle proprie esigenze di montaggio. Il sistema interno a LED può essere tagliato ogni 8 cm e riposizionato all’interno dell’estruso.
Signal system with LEDfor interior/outdoor use.Anodized aluminum profile with end caps with gaskets. Profiles can be jointed. Lengths are 100, 200, 300 cm. The source is medium emission a LED strip. Fixing with a metal fast bracket (BWALKSTAFFA). Remote LED driver, not included. IP67. NOTICE: The profile can be cut in accordance with the desired length. The interior LED system can be cut every 8 cm and placed in the profile.
walk system LED 04alluminio anodizzato
walk system LED 04 anodized aluminum
disegni tecnici/technical drawings1000 / 2000 / 3000
60
16,5
60
2,5 20
80alimentazione interna/internal feeding jointtappo terminale/end-cap
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
Ta max 35°CIP67 Ta min -20°C
277
applicazioni/applicationsSegnalazione di percorsi e superfici.N.B. In caso di montaggio all’esterno, predisporre una scatolastagna per l’alloggiamento dell’alimentatore./Path marking and graze lighting.NOTICE: in case of outdoor installation, put the feeder in a waterproof box.
tabella di riepilogo prodotti/ product overview table
prodotto/product
codice/code
BWALKIP67/R1000W
BWALKIP67/R2000W
BWALKIP67/R3000W
colore/colour
cool white
cool white
cool white
tipo/type
esterni/outdoorL=100 cm
esterni/outdoorL=200 cm
esterni/outdoorL=300 cm
LED/LED
3,6W
7,2W
10,8W
tipo di LED/LED type
nastro media emissione/medium emission strip
nastro media emissione/medium emission strip
nastro media emissione/medium emission strip
materiale/material
alluminio/ aluminum
alluminio/ aluminum
alluminio/ aluminum
fissaggio/fixing
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
con molle (incluse)/with springs (included)
IP/IP
67
67
67
accessori/accessories
profili/ giunto/profile/ joint
profili/ giunto/profile/ joint
profili/ giunto/profile/ joint
accessori/accessoriesProfili vuoti p.337/ Giunto di alimentazione/ Tappo terminale (non inclusi)
Recessed profile p.337/ Feeding joint/ End-cap (not included)
*Esempio schemi di collegamento a p.347/ Example of wiring diagram on p.347
Ta max 35°CIP67
disegni tecnici/technical drawings
alimentazione interna/internal feeding jointtappo terminale/end-cap
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
9W - 12V - 73x35x18 (h)
25W - 12V - 157x43x30 (h)
60W - 12V - 198x44x40 (h)
100W - 12V - 230x65x42 (h)
240W - 12V - 193x163x50 (h)
Sistema di segnalazione a LED da in-casso per interni/esterni. Corpo in profilo di alluminio anodizzato estru-so completo di molle di fissaggio. I profili sono collegabili ed hanno una lunghezza di 100, 200, 300 cm. La sorgente è costituita da un nastro LED a media emissione in materiale sintetico. Alimentatore esterno, escluso. IP67.N.B.: È possibile tagliare l’estruso in base alle proprie esigenze di montaggio. Il sistema inter-no a LED può essere tagliato ogni 8 cm e ripo-sizionato all’interno dell’estruso.
Signal system with LEDfor interior/outdoor use.Anodized aluminum profile with fixing springs. Profiles can be jointed. Supplied lengths are 100, 200, 300 cm. The source is a medium emission LED strip. Remote LED driver, not in-cluded. IP67.NOTICE: The profile can be cut in accordance with the desired length. The interior LED system can be cut every 8 cm and placed in the profile.
walk system LED 04 incassoalluminio anodizzato
walk system LED 04 recessedanodized aluminum
60 80
18
25 31,5
1000 / 2000 / 3000
Ta min -20°C
outdooresterni
278
Sistema di segnalazione a LED per gradini. Corpo in profilo di alluminio estruso anodizzato nero, completo di gomma antiscivolo sulla parte superiore. La sorgente è posizionata nella parte inferiore ed è costituita da un nastro LED a me-dia emissione montato su supporto e completo di schermo di protezione trasparente. La lun-ghezza del profilo può essere di 100, 120, 200, 300 cm con una parte luminosa rispettivamente di 95, 115, 195, 295 cm. A scelta il colore dei LED può essere bianco, giallo, verde, blu, ros-so. I profili possono essere rifiniti con testatine di chiusura piene o sagomate. Alimentatore ester-no, escluso.N.B.: È possibile tagliare l’estruso in base alle proprie esigenze di montaggio. Il sistema inter-no a LED è modulare e può essere tagliato ogni 5 cm ed essere centrato all’estruso.
Signal system with LED for steps. Black anodized aluminum profile, with antislip rubber on the upper part. The LED source is a medium emission strip placed in the lower part covered from a clear screen. The lengths of the profile are 100, 120, 200, 300 cm, with a lit part of 95, 115, 195, 295 cm. The colours of the LED are: white, yellow, green, blue, red. Profiles can be supplied with some end-caps (order separately). Remote LED driver, not included.NOTICE: the profile can be cut in accordance with the desired length. The interior LED system can be cut every 5 cm and placed in the profile.
walk movie LEDalluminio anodizzato nero
walk movie LEDblack anodized aluminum
disegni tecnici/technical drawings
accessori/accessoriesTestate BMOVIEHEAD/01/N p.336/ BMOVIEHEAD/02/N p.336 (non inclusi)
End-caps BMOVIEHEAD/01/N p.336/ BMOVIEHEAD/02/N p.336 (not included)
1000/1200/2000/3000
1000/1200/2000/3000
77
30
Ta max 35°CIP40
279
applicazioni/applicationsSegnalazione di percorsi e gradini.Cinema./Path marking and steps lighting.Cinemas.
prodotto/product
codice/code
BMOVIELED100/W
BMOVIELED120/W
BMOVIELED200/W
BMOVIELED300/W
BMOVIELED100/Y
BMOVIELED120/Y
BMOVIELED200/Y
BMOVIELED300/Y
BMOVIELED100/G
BMOVIELED120/G
BMOVIELED200/G
BMOVIELED300/G
BMOVIELED100/B
BMOVIELED120/B
BMOVIELED200/B
BMOVIELED300/B
BMOVIELED100/R
BMOVIELED120/R
BMOVIELED200/R
BMOVIELED300/R
colore/colour
cool white
cool white
cool white
cool white
giallo/ yellow
giallo/ yellow
giallo/ yellow
giallo/ yellow
verde/ green
verde/ green
verde/ green
verde/ green
blu/ blue
blu/ blue
blu/ blue
blu/ blue
rosso/ red
rosso/ red
rosso/ red
rosso/ red
tipo/type
interni/ interiorL=100 cm
interni/ interiorL=120 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=100 cm
interni/ interiorL=120 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=100 cm
interni/ interiorL=120 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=100 cm
interni/ interiorL=120 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
interni/ interiorL=100 cm
interni/ interiorL=120 cm
interni/ interiorL=200 cm
interni/ interiorL=300 cm
potenza/power
4,5 W
5,4 W
9 W
13,5 W
4,5 W
5,4 W
9 W
13,5 W
4,5 W
5,4 W
9 W
13,5 W
4,5 W
5,4 W
9 W
13,5 W
4,5 W
5,4 W
9 W
13,5 W
tipo di LED/LED type
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
media emissione/medium emission
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
accessori/accessories
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
testate/end-caps
fissaggio/fixing
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
tramite viti/with screws
IP/IP
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
*Esempio schemi di collegamento a p.347/ Example of wiring diagram on p.347
tabella di riepilogo prodotti/ product overview table
*codice/codenon inclusi/not included
*codice/codenon inclusi/not included
caratteristiche/specifications
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED09W12V
WALIMLED025/12
WALIMLED060/12
WALIMLED100/12
WALIMLED240/12
WALIM/DIMM/JOLLY
WBOKVAR
WBOKOTDIM
9W 12V - 73x35x18 (h)
25W 12V - 157x43x30 (h)
60W 12V - 198x44x40 (h)
100W 12V - 230x65x42 (h)
240W 12V - 193x163x50 (h)
10W 12V - 103x67x21 (h) - dimm.
variatore/dimmer 1- 10V
Dimmer (50W max ) necessita di alimentazione/ needs driver
interiorinterni
280
Sistema di segnalazione per interni.Può essere installato tramite staffa su superficie. Il profilo è dotato di una copertura trasparente a protezione del nastro luminoso. In condizioni di scarsa luminosità è possibile segnalare percorsi oppure ostacoli con una luce discreta e non invadente. Il sistema si completa di tutti gli accessori necessari all’installazione come staffe di fissaggio, tappi di chiusura e alimentatore.
Signalizing system for interior use. It can be installed through bracket on surface. The profile has a clear protection cover for the interior strip. In dark areas, it can be used to signal paths. The system is complete with all necessary accessories such as mounting brackets, end-caps and feeder.
disegni tecnici/technical drawings
walk slimelettroluminescenzaalluminio anodizzato
walk slim electroluminescenceanodized aluminum
nastro elettroluminescente/electroluminescent stripnon incluso / not included
WALIMSLIM100/33
codice/code
BSLIM0200W
BSLIM1000W
BSLIM2000W
BSLIM0200B
BSLIM1000B
BSLIM2000B
BSLIM0200G
BSLIM1000G
BSLIM2000G
lunghezza/length
200 cm
1000 cm
2000 cm
200 cm
1000 cm
2000 cm
200 cm
1000 cm
2000 cm
colore/colour
bianca/ white
bianca/ white
bianca/ white
blu/ blue
blu/ blue
blu/ blue
verde/ green
verde/ green
verde/ green
33V OUT/ 230V IN
L= max 20 m
Tensione di uscita: 36 VOutput voltage: 36 V
Frequenza: 700 HzFrequency: 700 Hz
Capacità di alimentazione: 2000 cmFeeding until: 2000 cm
Assorbimento: 500 mAAbsorption: 500 mA
accessori/accessoriesStaffa di fissaggio BWALKSTAFFA p.337/ Profili vuoti p.337/ Giunto di alimentazione (non inclusi)
Fixing bracket BWALKSTAFFA p.337/ Recessed profile p.337/ Feeding joint (not included)
alimentatore/driver (non incluso/ not included)
1000/2000/3000 32,5
16,5
602,5
Ta max 35°CIP44
185
192
80
281
Sistema di segnalazione per interni.Può essere installato ad incasso. Il profilo è do-tato di una copertura trasparente a protezione del nastro luminoso. In condizioni di scarsa lu-minosità è possibile segnalare percorsi oppure ostacoli con una luce discreta e non invadente. Il sistema si completa di tutti gli accessori ne-cessari all’installazione come molle di fissaggio e alimentatore (non incluso).
Signalizing system for interior use. It can be recessed. The profile has a clear protection cover for the interior strip. In dark areas it can be used to signal paths. The system is complete with all necessary accessories such as mounting springs and driver (not included).
disegni tecnici/technical drawings
walk slimelettroluminescenza incassoalluminio anodizzato
walk slim electroluminescence recessedanodized aluminum
nastro elettroluminescente/electroluminescent stripnon incluso / not included
WALIMSLIM100/33
codice/code
BSLIM0200W
BSLIM1000W
BSLIM2000W
BSLIM0200B
BSLIM1000B
BSLIM2000B
BSLIM0200G
BSLIM1000G
BSLIM2000G
lunghezza/length
200 cm
1000 cm
2000 cm
200 cm
1000 cm
2000 cm
200 cm
1000 cm
2000 cm
colore/colour
bianca/ white
bianca/ white
bianca/ white
blu/ blue
blu/ blue
blu/ blue
verde/ green
verde/ green
verde/ green
33V OUT/ 230V IN
L= max 20 m
Tensione di uscita: 36 VOutput voltage: 36 V
Frequenza: 700 HzFrequency: 700 Hz
Capacità di alimentazione: 2000 cmFeeding until: 2000 cm
Assorbimento: 500 mAAbsorption: 500 mA
accessori/accessoriesProfili vuoti p.337/Giunto di alimentazione (non inclusi)
Recessed profile p.337/ Feeding joint (not included)
alimentatore/driver (non incluso/ not included)
1000/2000/300032,6
32,6
16,5
19,5
32,6
17
27
185
192
80
Ta max 35°CIP40
interiorinterni
282
Sistema di segnalazione ad elettroluminescenza per gradini.Il sistema Walk Movie è stato studiato per se-gnalare gradini e percorsi in mancanza di luce. Il sistema è composto da profili in alluminio ano-dizzato nero dotati di accessori e di gomma an-tiscivolo superiore. La sorgente luminosa è un nastro di elettroluminescenza alimentata a bas-so voltaggio (33V), collegabile all’alimentazione tramite uno speciale cavo ultrapiatto che può essere collocato sotto il rivestimento del pavi-mento. In questo modo è possibile segnalare anche i numeri di fila, corridoi e gradinate.
Signal system with electroluminescence for steps.Walk Movie has been designed to signalize steps and paths in case of poor light. The system is composed with black aluminum anodized profiles with accessories and an upper no slide rubber. The light source is a low voltage electroluminescence strip (33V) connected at the feeding with a special ultra flat cable that can be installed under the carpet. In this way you can signalize the row of seats, corridors and tiers.
disegni tecnici/technical drawings
accessori/accessories (non inclusi/ not included)
BMOVIECABLE - cavo ultrapiatto di connessione. Da usare come giunto di connessione (immagine 1)/ BMOVIEJOINT - giunto di connessione (1 per gradino o placca) 50mm (immagine 2)/BMOVIESIGN/01/B - placca di segnalazione posto disabili (immagine 3)/ BMOVIEHEAD/01/N - testata gradino normale 2mm p.336 (immagine 4)/ BMOVIEHEAD/02/N - testata gradino sagomata 2mm p.336 (immagine 5)
BMOVIECABLE - special ultra-flat cable of connection. To use with joint of connection (image1)/BMOVIEJOINT - joint of connection (1 for step or sign) 50mm (image2)/BMOVIESIGN/01/B - handicap sign (image3)/ BMOVIEHEAD/01/N - standard head for step 2mm p.336 (image4)/ BMOVIEHEAD/02/N - shaped head for step 2mm p.336 (image 5)
1 2 3 4 5
walk movie slimelettroluminescenzaalluminio anodizzato nero
walk movie slim electroluminescenceblack anodized aluminum
Ta max 35°CIP44
WALIMSLIM100/33 33V OUT/ 230V IN
L= max 20 m
Tensione di uscita: 36 VOutput voltage: 36 V
Frequenza: 700 HzFrequency: 700 Hz
Capacità di alimentazione: 2000 cmFeeding until: 2000 cm
Assorbimento: 500 mAAbsorption: 500 mA
alimentatore/driver (non incluso/ not included)
185
192
13
5,08 100
80
1000/1200/2000/2400/3000
1000/1200/2000/2400/3000
77
30
283
nastro elettroluminescente/electroluminescent stripnon incluso / not included
profili vuoti in alluminio/empty aluminum profiles
profilo con gomma antiscivolo/profile with no slide rubber
profilo con gomma antiscivolo e segnanumero/profile with no slide rubber and row numbers
codice/code
BSLIM0200W
BSLIM1000W
BSLIM2000W
BSLIM0200B
BSLIM1000B
BSLIM2000B
BSLIM0200G
BSLIM1000G
BSLIM2000G
codice/code
BMOVIE100
BMOVIE120
BMOVIE200
BMOVIE240
BMOVIE300
codice/code
BMOVIE100/01/B
BMOVIE120/01/B
BMOVIE200/01/B
BMOVIE240/01/B
BMOVIE300/01/B
codice/code
BMOVIE100/02/B
BMOVIE120/02/B
BMOVIE200/02/B
BMOVIE240/02/B
BMOVIE300/02/B
lunghezza/length
200 cm
1000 cm
2000 cm
200 cm
1000 cm
2000 cm
200 cm
1000 cm
2000 cm
lunghezza/length
100 cm
120 cm
200 cm
240 cm
300 cm
elettroluminescenza/electroluminescence
blu/ blue
blu/ blue
blu/ blue
blu/ blue
blu/ blue
elettroluminescenza/electroluminescence
blu/ blue
blu/ blue
blu/ blue
blu/ blue
blu/ blue
IP/IP
44
44
44
44
44
IP/IP
44
44
44
44
44
accessori/accessories
testate/
end-caps
testate/
end-caps
testate/
end-caps
testate/
end-caps
testate/
end-caps
accessori/accessories
testate/ placca/
end-caps/ sign
testate/ placca/
end-caps/ sign
testate/ placca/
end-caps/ sign
testate/ placca/
end-caps/ sign
testate/ placca/
end-caps/ sign
colore/colour
bianca/ white
bianca/ white
bianca/ white
blu/ blue
blu/ blue
blu/ blue
verde/ green
verde/ green
verde/ green
tipo/type
interni/
interior
interni/
interior
interni/
interior
interni/
interior
interni/
interior
tipo/type
interni/ interior
L=100 cm
interni/ interior
L=120 cm
interni/ interior
L=200 cm
interni/ interior
L=240 cm
interni/ interior
L=300 cm
tipo/type
interni/ interior
L=100 cm
interni/ interior
L=120 cm
interni/ interior
L=200 cm
interni/ interior
L=240 cm
interni/ interior
L=300 cm
materiale/material
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
materiale/material
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
materiale/material
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
alluminio anodizzato nero/
black anodized aluminum
applicazioni/applicationsIndicato per l’impiego all’interno di cinema, teatri e sale conferenza./It can be installed in cine-mas, theaters and mee-ting rooms.
interiorinterni
284
Sistema di segnalazione ad elettroluminescenza.Il sistema Walk Movie Run è stato studiato per segnalare percorsi in mancanza di luce. Il siste-ma è composto da profili in alluminio anodizzato nero con copertura in policarbonato. La sorgen-te luminosa è un nastro di elettroluminescenza alimentata a basso voltaggio (33V), collegabile all’alimentazione tramite uno speciale cavo ul-trapiatto che può essere collocato sotto il rive-stimento del pavimento.
Signal system with electroluminescence.Walk Movie Run has been designed to signalize paths in dark areas. The system is composed with a black anodized aluminum profile with a polycarbonate protection. The light source is a low voltage electroluminescence strip (33V) connected at the feeding with a special ultra flat cable that can be installed under the carpet.
disegni tecnici/technical drawings
walk movie runelettroluminescenzaalluminio anodizzato nero
walk system electroluminescenceblack anodized aluminum
Nastro elettroluminescente (incluso)/
Electroluminescent strip (included)
2000
26,8
5,5
26,8
codice/code
BMOVIERUN/200/B
elettroluminescenza/electroluminescence
blu/ blue
IP/IP
40
ottica/optic
fissa/
fixed
tipo/type
L=200 cm
interni/ interior
materiale/material
alluminio/
aluminum
WALIMSLIM100/33 33V OUT/ 230V IN
L= max 20 m
Tensione di uscita: 36 VOutput voltage: 36 V
Frequenza: 700 HzFrequency: 700 Hz
Capacità di alimentazione: 2000 cmFeeding until: 2000 cm
Assorbimento: 500 mAAbsorption: 500 mA
alimentatore/driver (non incluso/ not included)
185
192
80
Ta max 35°CIP40
tabella di riepilogo prodotti/ product overview table
prodotto/product
interiorinterni
288
Sistema magnetico a LEDsu binario in alluminio.In tre differenti lunghezze, 100, 200 e 300 cm. Può essere installato anche ad incasso e può essere tagliato nella misura che si desidera. I faretti sono magnetici e possono essere collo-cati sul binario senza l’ausilio di alcun attrezzo e posizionati a piacere. Disponibilie verniciato bianco. Dotato di circuito24V DC.BREVETTATO.
Magnetic LED system on aluminum track.Supplied in three different lengths, 100, 200 and 300 cm. It can be also recessed and cut to the desired length. Spots are magnetic and can be installed without any tools. Available white var-nish. Feeding at 24V DC.PATENTED.
MAGObinario e alimentazionealluminio
MAGO track and feedingaluminum
1000
23
35
IP20 Ta max 35°C
disegni tecnici/technical drawings
faretto orientabile*adjustable spot**
*L’immagine è puramente indicativa, rappresenta il sistema completo. Ogni componente viene venduto separatamente.**The picture is purelly indicative of the complete system. Each component is supplied separately.
faretto ottica fissa*fixed optic spot**
binario*track**
alimentazione*feeding**
33
13
25
289
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
16
23
33
WALIMLED025/24
WALIMLED035/24
WALIMLED050/24
25W - 24V - 109x50x35 (h)
35W - 24V - 120x65x40 (h)
50W - 24V - 185x45x40 (h)
applicazioni/applicationsPer illuminazione di vetrine, nicchie./For showcases, cove lighting.
I faretti sono magnetici e senza polarità. / Spots are magnetics and without any polarity.
prodotto*/product**
tabella di riepilogo prodotti/ product overview table
codice/code
MMAGBINARIO100E
MMAGBINARIO200E
MMAGBINARIO300E
MMAGALIM
caratteristiche/specifications
binario/track
L=100cm
binario/track
L=200cm
binario/track
L=300cm
alimentazione con morsetto/
feeding with clamp
materiale/material
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
tipo/type
interni/
interior
interni/
interior
interni/
interior
interni/
interior
finitura/finishing
bianco/
white
bianco/
white
bianco/
white
bianco/
white
fissaggio/fixing
con viti/
with screws
con viti/
with screws
con viti/
with screws
con viti/
with screws
IP/IP
20
20
20
20
interiorinterni
290
Faretto LED con ottica orientabile.Elemento formato da una base in alluminio e da una cover in policarbonato che permette il fissag-gio della parte orientabile. La cover é fissata mec-canicamente alla base, su quest’ultima sono fissati 2 magneti che ne permettono l’ancoraggio su bi-nario. 1 LED 1,2W 350mA ad alta resa. Dotato di circuito 24V DC. Vi è la possibilità di scelta tra lente a 45°/60°, o con ottica da 110°, rendendo l’appa-recchio ideale per l’impiego all’interno di vetrine.BREVETTATO.
Adjustable LED spot.Aluminum base with a polycarbonate cover that allows to fix the adjustable part. Cover mechanically fixed on the base. Base with 2 magnetic elements to fix the spot on the track. 1 LED 1,2W 350mA high emission. 24V DC built-in converter. Available with 45°/60° lens or with 110° beam angle as option. Fixture for using in showcases. PATENTED.
MAGOfaretto orientabilealluminio e policarbonato
MAGO adjustable LED spotaluminum and polycarbonate
disegni tecnici/technical drawings
applicazioni/applications
Per illuminazione di vetrine./For showcases.
51
22 33
prodotto/product
codice/code
MMAG08013500BO
MMAG0801350WBO
MMAG0801350NBO
MMAG08016500BO
MMAG0801650WBO
MMAG0801650NBO
MMAG08010500BO
MMAG0801050WBO
MMAG0801050NBO
colore/colour
cool white
warm white
neutral white
cool white
warm white
neutral white
cool white
warm white
neutral white
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
fissaggio/fixing
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
fascio ottico/beam angle
45°
45°
45°
60°
60°
60°
110°
110°
110°
IP/IP
20
20
20
20
20
20
20
20
20
ottica/optic
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
orientabile/adjustable
tabella di riepilogo prodotti/ product overview table
Ta max 35°C1,2WIP20
291
Faretto LED ottica fissa.Elemento formato da una base in alluminio e da una cover in policarbonato che protegge LED e lente. La cover é fissata meccanicamente alla base, su quest’ultima sono fissati 2 magneti che ne permettono l’ancoraggio su binario. 1 LED 1,2W 350mA ad alta resa, dotato di circuito 24V DC. Vi è la possibilità di scelta tra lente a 45°/60°, o con ottica da 110°, rendendo l’apparecchio ideale per l’impiego all’interno di vetrine.BREVETTATO.
Fixed LED spot.Aluminum base with a polycarbonate cover that protects LED and lens. Cover mechanically fixed on the base. Base with 2 magnetic elements to fix the spot on the track. 1 LED 1,2W 350mA. 24V DC built-in converter. Available with 45°/60° lens or with 110° beam angle as option. Fixture for using in showcases. PATENTED.
MAGOfaretto ottica fissaalluminio e policarbonato
MAGO fixed optic LED spotaluminum and polycarbonate
disegni tecnici/technical drawings
applicazioni/applications
Per illuminazione di vetrine./For showcases.
22
33
prodotto/product
codice/code
MMAG01013500BO
MMAG0101350WBO
MMAG0101350NBO
MMAG01016500BO
MMAG0101650WBO
MMAG0101650NBO
MMAG01010500BO
MMAG0101050WBO
MMAG0101050NBO
colore/colour
cool white
warm white
neutral white
cool white
warm white
neutral white
cool white
warm white
neutral white
tipo/type
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
interni/interior
LED/LED
01
01
01
01
01
01
01
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
alta emissione/high emission
materiale/material
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
policarbonato e alluminio/polycarbonate and aluminum
fissaggio/fixing
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
con magneti/with magnets
fascio ottico/beam angle
45°
45°
45°
60°
60°
60°
110°
110°
110°
IP/IP
20
20
20
20
20
20
20
20
20
ottica/optic
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
fissa/fixed
tabella di riepilogo prodotti/ product overview table
Ta max 35°C1,2WIP20
interiorinterni
292
Sistema modulare magnetico a LED. Il sistema è costituito da un modulo a base quadrata. Rappresenta un modo diverso di concepire l’illuminazione di teche e vetrine con copertura trasparente in quanto una possibile applicazione é il posizionamento appoggiato su queste con orientamento dell’apparecchio verso il basso. I faretti sono magnetici e pos-sono essere collocati sulla base senza l’ausilio di alcun attrezzo e senza problemi di polarità. Possono essere posizionati a piacere in qua-lunque momento. Faretti disponibili con 3 LED 1,2W ad alta emissione ed elevato indice di resa cromatica, ottica orientabile e fascio ottico con lente 10°/25°/40°. Disponibile nelle versioni warm white o cool white. Disponibile anodizza-to nero. Alimentazione a 24V DC. Possibilità di dimmerazione.Disponibili accessori di finitura per il prodotto. Eccellente Indice di Resa Cromatica (warm white = CRI >90).BREVETTATO.
Magnetic LED modular system.The system consist of a square modular base. It is a different way to conceive showcases lighting. It is possible the placement on showcase with transparent cover and shape the light downward. Magnetic spots can be installed on the base without additional tool and whenever is needed, without any polarity. Available spots with 3 LED 1,2W high emission and high Color Rendering Index. Adjustable optic 10°/25°/40° beam angle. Available in warm white or cool white. Supplied black anodized. Power supply at 24V DC. Dimming control available. There are finishing accessory for the profile. Excellent Colour Rendering Index (warm white = CRI >90).PATENTED.
expo Q design ISOLARCHITETTIalluminio e policarbonato
expo Q aluminum and polycarbonate
disegni tecnici/technical drawings
197
60 60
60 60
60,5
18
83
197
fascio ottico/beam angle
10° 25°
25°
40°
3x1,2WIP20 Ta max 35°C
faretto orientabile*adjustable spot**
cover di finitura*finishing cap**
struttura*box**
illuminamento/illumination
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90
bianco freddo/cool white(1 faretto/ 1 spot)
*L’immagine è puramente indicativa, rappresenta il sistema completo. Ogni componente viene venduto separatamente.**The picture is purelly indicative of the complete system. Each component is supplied separately.
293
applicazioni/applicationsPer illuminazione di vetrine./For showcases.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
9
25
WALIM40W24V
WALIMLED100/24
WBOKOTDIM
WBOKVAR
40W - 24V - 120x65x40 (h)
100W - 24V - 215x67x43 (h)
dimmer (120W max)
necessita di alimentatore/ needs driver
variatore/dimmer 1-10V
prodotto/product
prodotto/product
prodotto/product
faretti/spots
struttura/box
cover di finitura/finishing cap
tabella di riepilogo prodotti/ product overview table
codice/code
MMEG0803F300AN
MMEG0803F30WAN
MMEG08034300AN
MMEG0803430WAN
MMEG08037300AN
MMEG0803730WAN
codice/code
MMEGBOX
codice/code
MMEGCOVER
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/
interior interni/
interior interni/
interior
interni/
interior interni/
interior interni/
interior
tipo/type
interni/
interior
tipo/type
interni/
interior
LED/LED
03
03
03
03
03
03
faretti supportati/supported spots
09
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
materiale/material
alluminio/
aluminum
materiale/material
alluminio/
aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
con magneti/
with magnets
con magneti/
with magnets
con magneti/
with magnets
con magneti/
with magnets
con magneti/
with magnets
con magneti/
with magnets
finitura/finishing
nero/
black
finitura/finishing
nero/
black
IP/IP
20
20
20
20
20
20
IP/IP
20
IP/IP
20
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
interiorinterni
294
Sistema modulare magnetico a LED. Il sistema è costituito da un modulo a base line-are. Rappresenta un modo diverso di concepire l’illuminazione di teche e vetrine con copertura trasparente in quanto una possibile applicazione é il posizionamento appoggiato su queste con orientamento dell’apparecchio verso il basso. I faretti sono magnetici e possono essere collo-cati sul binario senza l’ausilio di alcun attrezzo e senza problemi di polarità. Possono essere posizionati a piacere in qualunque momento. Faretti disponibili con 3 LED 1,2W ad alta emis-sione ed elevato indice di resa cromatica, ottica orientabile e fascio ottico con lente 10°/25°/40°. Disponibile nelle versioni warm white e cool whi-te. Disponibile anodizzato nero. Alimentazione a 24V DC. Possibilità di dimmerazione. Disponibili accessori di finitura per il prodotto. Eccellente Indice di Resa Cromatica (warm white = CRI >90).BREVETTATO.
Magnetic LED modular system.The system consist of a linear modular base. It is a different way to conceive showcases lighting. It is possible the placement on showcase with transparent cover and shape the light downward. Magnetic spots can be installed on the track without additional tool and whenever is needed, without any polarity. Available spots with 3 LED 1,2W high emission and high Color Rendering Index. Adjustable optic 10°/25°/40° beam angle. Available in warm white and cool white. Supplied in black anodized. Power supply at 24V DC. Dimming control available. There are finishing accessory for the profile. Excellent Colour Rendering Index (warm white = CRI >90).PATENTED.
expo L design ISOLARCHITETTIalluminio
expo L aluminum
disegni tecnici/technical drawings
68,5
560/920
85,8
60 60
60 6060,5
fascio ottico/beam angle
10° 25° 40°
3x1,2WIP20 Ta max 35°C
faretto orientabile*adjustable spot**
cover di finitura*finishing cap**
binario*track**
accessori/accessoriesMMEGSOSP - sospensione per profilo/ suspension for profile
18
25°
illuminamento/illumination
h (m) E (lx) D (cm)
0.50
1.00
1.50
2.00
4080
1020
453
255
30
45
65
90
bianco freddo/cool white(1 faretto/ 1 spot)
*L’immagine è puramente indicativa, rappresenta il sistema completo. Ogni componente viene venduto separatamente.**The picture is purelly indicative of the complete system. Each component is supplied separately.
295
prodotto/product
binario/track
tabella di riepilogo prodotti/ product overview table
codice/code
MMEGPROFILO60
MMEGPROFILO100
lunghezza/lenght
60cm
100cm
finitura/finishing
nero/
black
nero/
black
tipo/type
interni/
interior
interni/
interior
faretti supportati/supported spots
09
15
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fissaggio/fixing
con staffe (incluse)/
with brackets (included)
con staffe (incluse)/
with brackets (included)
IP/IP
20
20
applicazioni/applicationsPer illuminazione di vetrine, negozi./For showcases, shops.
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
WALIM40W24V
WALIMLED100/24
WBOKOTDIM
WBOKVAR
40W - 24V - 120x65x40 (h)
100W - 24V - 215x67x43 (h)
dimmer (120W max)
necessita di alimentatore/ needs driver
variatore/dimmer 1-10V
*Esempio schemi di collegamento a p.346/ Example of wiring diagram on p.346
prodotto/product
prodotto/product
faretti/spots
cover di finitura/finishing cap
codice/code
MMEG0803F300AN
MMEG0803F30WAN
MMEG08034300AN
MMEG0803430WAN
MMEG08037300AN
MMEG0803730WAN
codice/code
MMEGCOVER
colore/colour
cool white
warm white
cool white
warm white
cool white
warm white
tipo/type
interni/
interior interni/
interior interni/
interior
interni/
interior interni/
interior interni/
interior
tipo/type
interni/
interior
LED/LED
03
03
03
03
03
03
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
alluminio/
aluminum
materiale/material
alluminio/
aluminum
fascio ottico/beam angle
10°
10°
25°
25°
40°
40°
ottica/optic
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
orientabile/
adjustable
fissaggio/fixing
con magneti/
with magnets
con magneti/
with magnets
con magneti/
with magnets
con magneti/
with magnets
con magneti/
with magnets
con magneti/
with magnets
finitura/finishing
nero/
black
IP/IP
20
20
20
20
20
20
IP/IP
20
per profilo L=60 cm/ for L=60 cm profile
per profilo L=100 cm/ for L=100 cm profile
interiorinterni
296
Binario flessibile a bassa tensione.Piccolo binario di illuminazione a basso voltaggio realizzato in estrusione di policarbonato e bande in rame (lega 27% IACS) ad alta conducibilità. Ha la sede per due coppie di conduttori in rame diame-tro 2,5mm (4 conduttori) per il trasporto elettrico. Sezione totale del conduttore 8 mmq. Alta resi-stenza termica. Opera a bassa tensione a 12V o 24V in parallelo (garanzia di continuità del circuito elettrico indipendentemente dal numero di lampa-dine inserite e funzionanti). Carico massimo di 30A. Per un’alimentazione in 12V, la potenza massima è di 360W e per un’alimentazione a 24V la potenza massima è di 720W. Si può usare con lampadine LED (12V) e con lampadine incandescenti o allo xenon 5W o faretti con bispina max 20W, dicroiche max 20W (vedere catalogo Innovation). Profilo cur-vabile per adattarsi a forme concave o convesse, con un raggio di curvatura di 35 cm. I profili stan-dard possono essere collegati in serie utilizzando giunti elettrici lineari o curvi. È dotato nella parte inferiore di un sistema di aggancio a coda di rondi-ne per un montaggio rapido (senza viti o adesivi). Forature pre-spaziate per l’applicazione alle super-fici mediante viti. Per il fissaggio utilizzare sempre il distanziale isolante HAN-IS. Il binario può essere tagliato con un seghetto a lunghezza desiderata, limando il bordo dopo il taglio.
Flexible track.Small low-voltage track, polycarbonate extrusion with high-conductive copper sides (27% IACS alloy). Available for mounting two copper conductors couples 2,5 mm diam. (4 conductors) for carrying electricity. Total conductor section 8 sqmm. High-thermical resistance. Profile bending adapting to hollow or convex shapes. 12V or 24V linear low-voltage (it ensures continuity of the electrical circuit, independently from the quantity of the installed operating bulbs). 30A maximum load.360W is the maximum power applied with 12V feeding, while 24V allows 720W maximum power. LED bulbs (12V) or 5W incandescent or xenon bulbs available, spots with 20W maximum two pins or dichroic bulbs (see Innovation catalogue). Bending radius 35 cms. Standard profiles can be connected in series with linear or curved electric joint. The underside equipped with “swallow-tailed” clips system for quick installation (screws and adhesif not required). Pilot holes for screws mounting application. For fixation always use the insulation sleves HAN-IS. Pour fixer le rail, utiliser toujour l’article HAN-IS.
sistema angelicuspolicarbonato e rame
angelicus system polycarbonate and copper
esempio di compisizione/example of composition
HAN-200
HAN-MATE1
WLED12V2700
HAN-WWASH1
LROUND5
12V360W
max30AIP20 L max 8m
297
applicazioni/applicationsMobili, cucine, mensole, specchiere, controsoffitti, banconi, reception, vetrine di ogni tipo e dove gli spazi ridotti non permettono di utilizzare le comuni sorgenti luminose disponibili sul mercato. Illumi-nazione angolare per superfici curve, per velette, illuminazione di gradini./Furniture, kitchens, walls, display-case, for all applications where the space does not allow to use the traditional light. Corner lighting for curved surfaces, stairs lighting.
interiorinterni
298
binario flessibile/flexible track sezione/section
22
6
14
5
ø2,5
alimentazione e giunti/feeders and joints
lunghezza/length
100 cm
200 cm
300 cm
400 cm
600 cm
codice/code
HAN-100
HAN-200
HAN-300
HAN-400
HAN-600
trasformatori 12V - 5W/transformers 12V - 5W
100W
200W
300W
n° max lampadine/n° max light bulb
20
40
60
80
120
Alimentazione di testata. In policarbonato,completa di tappo di chiusura.
Feeding head.In polycarbonate,with end closing.
codice/code - HAN-T1
Coppia adesivi in velcro. L=50mm
Pair of adhesive tape.L=50mm
codice/code - HAN-DL
Giunto elettrico curvo.
Curved electric joint.
codice/code - HAN-T3
Giunto elettrico lineare.
Linear electric joint.
codice/code - HAN-T2
Distanziale isolante.
Insulation sleeve.
codice/code - HAN-IS
WT12V100W 12V 100W a=31 b=40 c=97,5
WT12V150W 12V 150W a=32,5 b=45 c=126
WT12V200W 12V 200W a=38,5 b=49 c=153
WT12V250W 12V 250W a=38,5 b=49 c=151
WTOR200 12V 200W ø=114 h=45
WTOR300 12V 300W ø=131 h=47
WTOR400 12V 400W ø=133 h=56,5
WTOR500 12V 500W ø=131 h=66
trasformatori/transformers
codice/code
codice/code
descrizione/description
descrizione/description
ingombri/dimensions
ingombri/dimensions
elettronicl/electronic
toroidale/toroidal
ø
c
h
b
a
299
lampadine LED/LED bulbscodice/code
WLED12V2700
WLED12V4200
WLED12V5500
Faretto per lmpadine a siluro. In policarbonato trasparente oin policarbonato metallizzato alluminio oin policarbonato colore dorato.
Spot for bulbs.In clear polycarbonate orin polycarbonate with bright aluminum finish or in polycarbonate golden colour.
codice/code
HAN-MATE 1- trasparente/clearHAN-MATE 2 - metallizzato alluminio/
bright aluminumHAN-MATE 3 - dorato/golden
Riflettore wall washer basculante. Per HAN-MATE 1, disponibile grigio.Per HAN-MATE 2, disponibile alluminio metallizzato.Per HAN-MATE 1, disponibile dorato.
Wall washer reflector.For HAN-MATE 1, available grey.For HAN-MATE 2, available bright aluminum.For HAN-MATE 1, available golden.
codice/code
HAN-WWASH 1- grigio/greyHAN-WWASH 2 - metallizzato alluminio/
bright aluminumHAN-WWASH 3 - dorato/golden
28
14,323
48
T31/4
SV8.5/8
Protezione per singolo faretto. In metacrilato satinato.Max potenza 5W
Protection for single spot. In frosted methacrylate.Max power 5W
codice/code
LROUND5
5 5
35,5
17
42
25
potenza/power
0,48W
(2 LED)
0,48W
(2 LED)
0,48W
(2 LED)
fascio ottico/beam angle
110°
110°
110°
efficienza/efficiency
62,5-75 lm/W
62,5-75 lm/W
62,5-75 lm/W
T colore/colout T
2700°K
4200°K
5500°K
alimentazione/feeding
12V
AC-DC
12V
AC-DC
12V
AC-DC
flusso lum./lum. flux
30-36 lm
30-36 lm
30-36 lm
interiorinterni
300
Profilo rotondo. L =120cm o 240cmIn alluminio anodizzato ocon finitura grigio antico oin ottone lucido oin ottone satinato.
Round profile. L =120cm o 240cmIn anodized aluminum orwith antique grey finiture orin polished brass orin frosted brass.
codice/codeL =120cm HROTONDOAA120 - alluminio anodizzato/
anodized aluminum
HROTONDOGR120 - finitura grigio antico/antique grey finiture
HROTONDOOL120 - ottone lucido/polished brass
HROTONDOOS120 - ottone satinato/frosted brass
L =240cmHROTONDOAA240 - alluminio anodizzato/
anodized aluminum
HROTONDOGR240 - finitura grigio antico/antique grey finiture
HROTONDOOS240 - ottone satinato/frosted brass
Profilo angolare. L =120cm o 240cmIn alluminio anodizzato ocon finitura grigio antico oin ottone lucido oin ottone satinato.
Angle profile. L =120cm o 240cmIn anodized aluminum orwith antique grey finiture orin polished brass orin frosted brass.
codice/codeL =120cm HANGOLAREAA120 - alluminio anodizzato/
anodized aluminum
HANGOLAREGR120 - finitura grigio antico/antique grey finiture
HANGOLAREOL120 - ottone lucido/polished brass
HANGOLAREOS120 - ottone satinato/frosted brass
L =240cmHANGOLAREAA240 - alluminio anodizzato/
anodized aluminum
HANGOLAREGR240 - finitura grigio antico/antique grey finiture
HANGOLAREOS240 - ottone satinato/frosted brass
31,2
33
33
R 16,65
R 17,65
301
Protezione*.In policarbonato LEXAN.L =60cm - max potenza 5W.Protection*.LEXAN polycarbonate.L =60cm - max power 5W.
codice/codeLFILM
Protezione**.In policarbonato LEXAN.L =60cm o 120cm - max potenza 5W.Protection**.LEXAN polycarbonate.L =60cm or 120cm - max potenza 5W.codice/codeLEXAGONAL060 - L=60cmLEXAGONAL120 - L=120cm
Griglia schermo*.In alluminio o ottone.L =120cm.Screen grid*.In aluminum or brass.L =120cm.codice/codeHGCR/A - alluminio/aluminumHGCR/B - ottone/brass
Griglia schermo**.In alluminio o ottone.L =120cm.Screen grid**.In aluminum or brass.L =120cm.codice/codeHGCS/A - alluminio/aluminumHGCS/B - ottone/brass
Coppia terminali per profilo*.Disponibile in nero con staffe.
End couple for profile*.Supplied in black with brackets.
codice/codeLTERMTONDO
Coppia terminali per profilo**.Disponibile in nero con staffe.
End couple for profile**.Supplied in black with brackets.
codice/codeLTERMANGO *Solo per profilo tondo. /Only for round profile.
**Solo per profilo angolare. /Only for angle profile.
interiorinterni
304
Micro illuminatore a LED 01 per fibre ottiche.Corpo in alluminio anodizzato nero ricavato dal pie-no, LED da 2,5W 700 mA ad altissima resa com-pleto di dissipatore. IP68. Una speciale ottica di convogliamento, consente di indirizzare la massima potenza sul mini connettore comune (Tipo 5), otte-nendo un’ottima resa luminosa delle fibre ottiche. Pressacavo posteriore in metallo. Il fissaggio può avvenire con snodo orientabile. Alimentatore ester-no, escluso. Per la quantità di fibre ottiche, vedere la tabella. N.B.: In caso di montaggio all’esterno, predisporre una scatola stagna per l’alloggiamento dell’alimentatore.
Micro LED light-box 01 for fibre optics. Black anodized aluminum body, LED 2,5W 700mA high emission with heat dissipator. IP68. A special conveyance optic allows the maximum power on the mini common-end (Type 5) achieving the high light emission of the fibre optics. Metal cable gland. Fixation by adjustable joint. Remote LED driver, not included. Concerning fibres quantity, please refer to the list. NOTICE: In case of outdoor installation, put the feeder in a waterproof box.
disegni tecnici/technical drawings
illuminatore LED 01alluminio anodizzato nero
LED light-box 01black anodized aluminum
applicazioni/applications
Illuminazione “cielo stellato”, illuminazione di fibre ottiche per pannellidecorativi e scritte./ Sky ceiling lighting, panels or signs lighting.
tipologia/type
materiale fibra/fibre material
n. di fibre/n. of fibres
PMMAPMMAVetro/glassVetro/glassVetro/glassVetro/glassVetro/glass
FIBRA CK 30FIBRA CK 40FIBRA ø 6FIBRA ø 4,3FIBRA ø 3,3FIBRA ø 2,6FIBRA ø 1,3
50351246
24
*Esempio schemi di collegamento a p.345/ Example of wiring diagram on p.345
77
69
ø30
22
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
quantità di fibre ottiche utilizzabili/max quantity of fibers optics
133-54-124-128/
WALIMLED 01700WALIMLED 03700WALIMLED 05700WALIMLED 12700WALIMLED 12700DWALIM/DIMM/JOLLYWBOKVAR
3W - 700mA - 32x50x18 (h)10W - 700mA - 115x34x20 (h)18W - 700mA - 160x45x32 (h)36W - 700mA - 132x40x30 (h)36W - 700mA - 132x40x30 (h) - dimm.25W - 700mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
tabella di riepilogo prodotti/ product overview tableprodotto/product
codice/code
QILL09010300AN
QILL0901030WAN
colore/colour
cool white*
warm white*
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
01
01
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/ aluminum
alluminio/ aluminum
fissaggio/fixing
tramite snodo/with joint
tramite snodo/with joint
IP/IP
68
68
accessori/accessories
snodo/joint
snodo/joint
accessori/accessoriesSnodo BLUXSNODO (non incluso p.335)
Joint BLUXSNODO (not included p.335)
Ta max 35°C2,5WIP68
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
Ta min -20°C
305
tipologia/type
materiale fibra/fibre material
n. di fibre/n. of fibres
quantità di fibre ottiche utilizzabili/max quantity of fibers optics
Illuminatore a LED 02 per fibre ottiche. Corpo in alluminio anodizzato nero ricavato dal pieno, sorgente formata da 3 LED da 2,5W 700 mA ad alta resa completi di dissipatore e dotati di ottica di convogliamento, per consentire una resa ottimale delle fibre ottiche. IP68. Questo illumina-tore utilizza un normale connettore comune (Tipo 1 Light). Questo solido e innovativo apparecchio rappresenta la soluzione ideale per poter creare effetti di luce decorativi, sia in interni che in esterni, o quando ci siano problemi di rumorosità e ridot-te dimensioni dei vani di alloggiamento. Eccellente Indice di Resa Cromatica (warm white = CRI >90). BREVETTATO.
LED light-box 02 for fibre optics. Black anodized aluminum body, 3 LED 2,5W 700mA high emission with dissipator. A special con-veyance optic allows the best light of the fibre op-tics. IP68. This light-box uses a common-end (Type 1 Light). This new light-box represents the best so-lution to create decorative effects, either for interior or outdoor use, or when it is necessary to have a no noisy or smaller light-box. Excellent Colour Rende-ring Index (warm white = CRI >90). PATENTED.
disegni tecnici/technical drawings
illuminatore LED 02alluminio anodizzato nero
LED light-box 02black anodized aluminum
applicazioni/applications
Illuminazione “cielo stellato”, illuminazione di fibre ottiche per pannelli decorativi e scritte. N.B.: In caso di montaggio all’esterno, predisporre una scatola stagna per l’alloggiamento dell’ alimentatore. Staffa per fissaggio inclusa./Sky ceiling lighting, panels or signs lighting. NOTICE: In case of outdoor installation, put the feeder in a waterproof box. Bracket for fixing included. PMMA
PMMAVetro/glassVetro/glassVetro/glassVetro/glassVetro/glass
FIBRA CK 30FIBRA CK 40FIBRA ø 6FIBRA ø 4,3FIBRA ø 3,3FIBRA ø 2,6FIBRA ø 1,3
250150
49
1525
100
*Esempio schemi di collegamento a p.345/ Example of wiring diagram on p.345
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
alimentatori/LED drivers
122-42-43/
WALIMLED 03700WALIMLED 05700WALIMLED 12700WALIMLED 12700DWALIM/DIMM/JOLLYWBOKVAR
10W - 700mA - 115x34x20 (h)18W - 700mA - 160x45x32 (h)36W - 700mA - 132x40x30 (h)36W - 700mA - 132x40x30 (h) - dimm.25W - 700mA - 103x67x21 (h) - dimm.variatore/dimmer 1-10V
tabella di riepilogo prodotti/ product overview tableprodotto/product
codice/code
QILL0903F300AN
QILL0903F30WAN
colore/colour
cool white*
warm white*
tipo/type
interni/esterniinterior/outdoor
interni/esterniinterior/outdoor
LED/LED
03
03
tipo di LED/LED type
alta emissione/high emission
alta emissione/high emission
materiale/material
alluminio/ aluminum
alluminio/ aluminum
fissaggio/fixing
tramite staffa/with bracket
tramite staffa/with bracket
IP/IP
68
68
135 44
*Disponibile con LED a luce colorata su richiesta. / Coloured LED on demand.
Ta max 35°CIP68 3x2,5W Ta min -20°C
outdooresterni
306
Illuminatore a LED 02 per fibre ottiche con base.Corpo in alluminio anodizzato nero ricavato dal pie-no e base in acciaio inox AISI 303 verniciata grigio. Sorgente formata da 3 LED da 1,2W 350 mA ad alta resa completi di dissipatore e dotati di ottica di convogliamento, per consentire una resa ottimale delle fibre ottiche. Questo illuminatore utilizza un normale connettore comune (Tipo 1 Light). Questo solido e innovativo apparecchio, rappresenta la so-luzione ideale per poter creare effetti di luce deco-rativi, sia in interni che in esterni, o quando ci siano problemi di rumorosità e ridotte dimensioni dei vani di alloggiamento. Completo di alimentatore nella base. Eccellente Indice di Resa Cromatica (warm white = CRI >90). BREVETTATO.
LED light-box 02 for fibre optics with base. Black anodized aluminum body and stainless steel AISI 303 base (finishing grey). With 3 LED 1,2W 350mA, high emission, with dissipator and interior optic to get the best light of the fibre optic. The light-box uses a standard common-end (1 light). It is able to create decorative effects, for interior/outdoor use or when noise is a problem. Integrated feeder. Excellent Colour Rendering Index (warm white = CRI >90). PATENTED.
disegni tecnici/technical drawings
applicazioni/applications
Illuminazione di ambienti, scaffali, mensole, vetrine./Shelves, showcases, decorative effects.
tabella di riepilogo prodotti/ product overview tableprodotto/product
codice/code
QILLB403F300NX
colore/colour
cool white*
tipo/type
interni/esterniinterior/outdoor
LED/LED
03
tipo di LED/LED type
alta emissione/high emission
materiale/material
alluminio e acciaio inox/ aluminum and stainless steel
fissaggio/fixing
tramite base/with base
IP/IP
65
PMMA
PMMA
Vetro/glass
Vetro/glass
Vetro/glass
Vetro/glass
Vetro/glass
FIBRA CK 30
FIBRA CK 40
FIBRA ø 6
FIBRA ø 4,3
FIBRA ø 3,3
FIBRA ø 2,6
FIBRA ø 1,3
250
150
4
9
15
25
100
142 142
110
illuminatore LED 02 + basealluminio e acciaio inox
LED light-box 02 + basealuminum and stainless steel
tipologia/type
materiale fibra/fibre material
n. di fibre/n. of fibres
quantità di fibre ottiche utilizzabili/max quantity of fibers optics
*Disponibile con LED a luce calda o colorata su richiesta. / Warm white LED or coloured LED on demand.
Ta max 35°C3x1,2WIP65 Ta min -20°C 230V
outdooresterni
308
Illuminatore a LED per fibre ottiche. Corpo in alluminio anodizzato ricavato dal pie-no. Sorgente formata da 1 LED da 13W 700mA, alta emissione, driver integrato. Base di appog-gio in alluminio anodizzato. Utilizza un normale connettore comune (Tipo 1 Light). Questo so-lido ed innovativo apparecchio rappresenta la soluzione ideale per poter creare effetti di luce decorativi e non, in interni, o quando ci siano problemi di rumorosità e ridotte dimensioni dei vani di alloggiamento. Disponibile in versione warm white o cool white. Utilizzabile con fibre ottiche in vetro e PMMA. IP54. Collegamento in parallelo. Alimentazione 24V DC.BREVETTATO.
LED Light-box for fiber optics.Body in anodized aluminum. 1 LED 13W 700mA high emission, built-in driver. Fixing with anodized aluminum base. The light-box uses a standard common-end (1 Light). Fibraled HP 13W represent the best solution when is needed to obtain decorative light effect in interior where is requested silence or spepific dimensions. Available in warm white or cool white. It can be used with glass fiber optics or PMMA fiber optics. IP54. Parallel connection. Power supply at 24V DC.PATENTED.
illuminatore fibraLED HPalluminio anodizzato
LED light-box fibraLED HP anodized aluminum
disegni tecnici/technical drawings
ø73160
IP54 Ta max 35°C13W
309
applicazioni/applicationsIlluminazione “cielo stellato”, effetti decorativi, scritte o teche./Sky ceiling lighting, for panels, signs or showcases.
*Esempio schemi di collegamento a p.346
Example of wiring diagram on p.346
*codice/codenon inclusi/not included
caratteristiche/specifications
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
QILLB4010400AA
QILLB401040WAA
colore/colour
cool white
warm white
tipo/type
interni/
interior
interni/
interior
LED/LED
01
01
tipo di LED/LED type
alta emissione/
high emission
alta emissione/
high emission
materiale/material
alluminio/
aluminum
alluminio/
aluminum
fissaggio/fixing
con base/
with base
con base/
with base
IP/IP
54
54
tipologia/type
materiale fibra/fibre material
n. di fibre/n. of fibres
PMMA
PMMA
Vetro/glass
Vetro/glass
Vetro/glass
Vetro/glass
Vetro/glass
FIBRA CK 30
FIBRA CK 40
FIBRA ø 6
FIBRA ø 4,3
FIBRA ø 3,3
FIBRA ø 2,6
FIBRA ø 1,3
250
150
4
9
15
25
100
quantità di fibre ottiche utilizzabili/max quantity of fibers optics
interiorinterni
310
Illuminatore a LED 02 RGBper fibre ottiche. Corpo in alluminio anodizzato nero ricavato dalpieno, sorgente formata da 1 LED RGB da 4,6W ad alta resa, completo di dissipatore e dotato di ottica di convogliamento, per consentire una resa ottimale delle fibre ottiche. Alimentatore escluso, staffa inclusa. Questo illuminatore utilizza un normale connettore comune (Tipo 1 Light). Questo solido e innovativo apparecchio rappresenta la soluzione ideale per poter creare effetti di luce decorativi cromatici (completa gamma cromatica), quando ci siano problemi di rumorosità e ridotte dimensioni dei vani di alloggiamento. La sequenza dinamica del cambio colore può avvenire automaticamente o a comando manuale, agendo direttamente sul Master o tramite telecomando (optional). IP65. N.B.: In caso di montaggio all’esterno, predi-sporre una scatola stagna per l’alloggiamento dell’alimentatore.
LED light-box 02 RGB for fiber optics.Black anodized aluminum body, 1 LED RGB 4,6W high emission with heat dissipator. A special conveyance optic allows the best light of the fibre optics. LED driver not included, bracket included. This light-box uses a common-end (Type 1 Light). This new light-box represents the best solution to create decorative chromatic effects, when it is necessary to have a no noisy or smaller light-box. The dynamic sequence of colour changing can be controlled automatically or manually using switches on the master panel, by remote control or by means of lighting controls. IP65.NOTICE: In case of external installation, put theLED driver in a waterproof box.
illuminatore LED 02 RGBalluminio anodizzato nero
LED light-box 02 RGB black anodized aluminum
disegni tecnici/technical drawings
135
ø44
IP65 4,6W Ta max 35°CRGB Ta min -20°C
311
applicazioni/applicationsIlluminazione “cielo stellato”. Illuminazione di fibre ottiche per pannelli decorativi e scritte./Sky ceiling lighting, panels or signs lighting.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
QILL0901S305AN
colore/colour
RGB
tipo/type
interni/esterni/
interior/outdoor
LED/LED
01
tipo di LED/LED type
alta emissione/
high emission
materiale/material
alluminio/
aluminum
fissaggio/fixing
tramite staffa/with bracket
IP/IP
65
*Esempio schemi di collegamento a p.354-356
Example of wiring diagram on p.354-356
*codice/codenon inclusi/not included
n. faretti/n. spots
caratteristiche/specifications
3
7
11
18
45
alimentatori/LED drivers
WALIMLED020/24
WALIM40W24V
WALIM60W24V
WALIMLED100/24
WALIMLED240/24
20W - 24V - 146x55x19 (h)
40W - 24V - 120x65x40 (h)
60W - 24V - 184x45x40 (h)
100W - 24V - 215x67x43 (h)
240W - 24V - 193x163x50 (h)
controllo RGB/controller RGB
alimentatori/ LED drivers - Controller RGB-DMX
L’ASSORBIMENTO DEGLI SLAVE E’ PARI AL 10-20% DELL’ASSORBIMENTO DEI FARETTI SUPPORTATI.THE POWER CONSUMPTION OF THE DMX SLAVE IS APPROXIMATELY 10-20% OF THE TOTAL POWER CONSUMPTION OF THE CONNECTED LUMINAIRES.
codice/code non inclusi/not included
codice/code non inclusi/not included
Slave DMX
Master RGB
Master DMX
Slave RGB
Controller
Cavi/ Cables
Amplificatore di segnale e tappo terminale/ Signal amplifier and end-capController
caratteristiche/specifications
caratteristiche/specifications
n. faretti/n. spots
n. faretti/n. spots
WMASTERRGB5X3I
WMASTERDMX/INC
WCOLORWHEEL
WALIMCOLORWHEEL
WSLAVEDMX6X3
WSLAVERGB5X3
WTELEC-RGB
QDMX512/CABLE-A
QDMX512/CABLE-B
WTELEC-RGB
Master RGB + sensor
Master DMX512
Master DMX
Alimentatore per WCOLORWHEEL
(obbligatorio)/
Feeder for WCOLORWHEEL
(strictly necessary)
Slave DMX
Slave RGB
Telecomando / Remote control
Cavo segnale 24 AWG per DMX L= 3m/
Signal cable 24 AWG for DMX L= 3m/
Cavo segnale 24 AWG per DMX L= 10m/
Signal cable 24 AWG for DMX L= 10m/
3
/
/
/
5
3
Telecomando / Remote control
(con/with WMASTERRGB5X3l)WAMPL/SIGNAL-DMX
QDMX512/CAP
Amplificatore di segnale DMX 6 uscite
(30 slave max per ogni uscita)
Signal amplifier DMX 6 output
(30 slave max for each output)
Tappo terminale DMX / DMX end-cap
!
decorativedecorativo
312
Kit con illuminatore a LED e fascio di fibre ottiche per cielo stellato. Sono composti da un illuminatore a LED 01 con 1 LED da 2,5W 700 mA, IP68, realizzato con corpo in alluminio anodizzato nero completo di alimentatore esterno. Il fascio (bundle) di fibre ottiche in PMMA (sintetiche) è disponibile in due diverse lunghezze di composizione. Può essere utilizzato per effetti di cielo stellato sia in interno che all’esterno, e per la creazione di pannelli decorativi e scritte.N.B.: In caso di montaggio all’esterno, predisporre una scatola stagna per l’alloggiamento dell’alimen-tatore.
Kit composed from one LED light-box and one bundle of fibre optics for starry sky. LED light-box 01 with 1 LED 2,5W 700mA, IP68, black anodized aluminum body with remote LED driver. The bundle of fibre optics is composed from PMMA fibres with two different lengths, depends on composition. For starry sky effect, in interior or outdoor applications and for creating decorative panels or logos.NOTICE: In case of outdoor applications, put the LED driver in a waterproof box.
disegni tecnici/technical drawings
kit cielo stellato 01-02
kit starry sky 01-02
applicazioni/applications
Illuminazione “cielo stellato”, illuminazione di fibre otticheper pannelli decorativi e scritte./Sky ceiling lighting, panels or signs lighting.
accessori/accessoriesFissaggio tramite snodo BLUXSNODO (non incluso, p.335)
Fixation with joint BLUXSNODO (not included, p.335)
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
QKITSKY11
QKITSKY12
colore/colour
cool white
cool white
tipo/type
interni/ esterni/
interior/ outdoor
interni/ esterni/
interior/ outdoor
LED/LED
01
01
numero fibre/quantity fibers
65 fibre/ fibres CK 30 L=100 cm
65 fibre/ fibres CK 30 L=200 cm
alimentatorifeeder
inclusi/
included
inclusi/
included
accessori/accessories
snodo/
joint
snodo/
joint
fissaggio/fixing
tramite snodo/
with joint
tramite snodo/
with joint
Ta max 35°C2,5W
69
ø30
Ta min -20°C
313
Kit con illuminatore a LED e fascio di fibre ottiche per cielo stellato. Sono composti da un illuminatore a LED 02, IP68 con 3 LED da 2,5W 700 mA, realizzato con cor-po in alluminio anodizzato nero, dotato di staffetta di fissaggio e completo di alimentatore esterno. Il fascio (bundle) di fibre ottiche è formato da fibre in PMMA (sintetiche), con lunghezze diverse a secon-da della composizione. Può essere utilizzato per la creazione di cieli stellati sia in interno che all’esterno e per illuminazione segnaletica di scale, cammina-menti.N.B.: In caso di montaggio all’esterno, predisporre una scatola stagna per l’alloggiamento dell’alimen-tatore.
Kit composed from one LED light-box and one bundle of fibre optics for starry sky. LED light-box 02 with 3 LED 2,5W 700mA, IP68 black anodized aluminum body with joint to adjust the position and remote LED driver. The bundle of fibre optics is composed from PMMA fibres with two different lengths, depends on composition. For starry sky effect, in interior or outdoor applications and for signals on stairs or path etc...NOTICE: In case of outdoor applications, put the LED driver in a waterproof box.
disegni tecnici/technical drawings
kit cielo stellato 03-04
kit starry sky 03-04
applicazioni/applications
Illuminazione “cielo stellato”, illuminazione di fibre otticheper pannelli decorativi e scritte./Sky ceiling lighting, panels or signs lighting.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
QKITSKY13
QKITSKY14
colore/colour
cool white
cool white
tipo/type
interni/ esterni/
interior/ outdoor
interni/ esterni/
interior/ outdoor
LED/LED
03
03
numero fibre/quantity fibers
150 fibre/ fibres PMMA
CK 40 ø 1,0 mm L=200 cm
150 fibre/ fibres PMMA
CK 40 ø 1,0 mm (75 L=100 cm/ 75 L=200 cm)
alimentatorifeeder
inclusi/
included
inclusi/
included
fissaggio/fixing
tramite staffa/
with bracket
tramite staffa/
with bracket
Ta max 35°C3x2,5W Ta min -20°C
decorativedecorativo
314
Kit con illuminatore a LED e fascio di fibre ottiche per cielo stellato. Sono composti da un illuminatore a LED 02, IP68 con 3 LED da 2,5W 700 mA, realizzato con corpo in alluminio anodizzato nero, dotato di staffetta di fissaggio e completo di alimentatore esterno. Il fa-scio (bundle) di fibre ottiche è formato da fibre di vetro, con lunghezze diverse a seconda della com-posizione. Può essere utilizzato per la creazione di cieli stellati sia in interno che all’esterno e per illu-minazione segnaletica di scale, camminamenti. In abbinamento al kit, possono essere applicati tutti gli accessori previsti per il diametro di fibra utilizzato. (Vedi Catalogo Tecnico Fibre Ottiche). N.B.: In caso di montaggio all’esterno, predisporre una scatola stagna per l’alloggiamento dell’alimentatore.
Kit composed from one LED light-box and one bundle of fibre optics for starry sky. LED light-box 02 with 3 LED 2,5W 700mA, IP68 black anodized aluminum body with joint to adjust the position and remote LED driver. The bundle of fibre optics is composed from glass fibres with two different lengths, depends on composition. For starry sky effect, in interior or outdoor applications and for signals on stairs or path etc... All the accessories for glass fibre are available (see our technical manual for fibre optics). NOTICE: In case of outdoor applications, put the LED driver in a waterproof box.
disegni tecnici/technical drawings
kit cielo stellato 05-06
kit starry sky 03-04
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
QKITSKY15
QKITSKY16
colore/colour
cool white
cool white
tipo/type
interni/ esterni/
interior/ outdoor
interni/ esterni/
interior/ outdoor
LED/LED
03
03
numero fibre/quantity fibers
100 fibre/ fibers in vetro/ glass
ø 1,3 mm L=200 cm
100 fibre/ fibers in vetro/ glass
ø 1,3 mm (50 L=200 cm/ 50 L=300 cm)
alimentatorifeeder
inclusi/
included
inclusi/
included
fissaggio/fixing
tramite staffa/
with bracket
tramite staffa/
with bracket
Ta max 35°C3x2,5W
applicazioni/applications
Illuminazione “cielo stellato”, illuminazione di fibre otticheper pannelli decorativi e scritte./Sky ceiling lighting, panels or signs lighting.
Ta min -20°C
decorativedecorativo
318
Adattatore 24V DC.Disponibile in 3 versioni: bianco, nero o grigio.
Rail adapter 24V DC.Supplied in 3 versions: white, black or grey.
codice/code
MKITADATT24VBO - bianco/whiteMKITADATT24VNE - nero/blackMKITADATT24VGR - grigio/grey
Binario. Lunghezza 2m.Disponibile bianco o nero.
Track.Length 2m.Supplied white or black.
codice/code
MSMA2000BI - bianco/whiteMSMA2000NE - nero/black
Adattatore 220V DCDisponibile in 3 versioni: bianco, nero o grigio.
Rail dapter 220V DCSupplied in 3 versions: white, black or grey.
codice/code
MKITADAT220VBO - bianco/whiteMKITADAT220VNE - nero/blackMKITADAT220VGR - grigio/grey
esempio di compisizione/example of composition
esempio kit sospensione/suspension kit example
track system
track system
56
84
84
170
228
5530
32,5
L=2m 31,5
32,5
230V24V
MSMA0027BI
MSMA0026NE
MSMA2000BI
MSMA2000NE
MSMA0020BI
MSMA0016NE
MSMA0031BI
MSMA0030NE
MSMA0022BI
MSMA0012NE
MSMA0024BI MSMA0019GR
MSMA0018
MSMA0017
MSMA0015AL
319
applicazioni/applications
Illuminazione generale di ambienti, negozi, quadri, mostre, scaffali./Hospitality lighting, general lighting, decorative lighting, pictures, exhibition, shelves.
apparecchi compatibili/compatible fittings
S.M.A. staffa/ S.M.A bracket - p.142S.M.A.R. staffa/ S.M.A.R. bracket - p.148Kalibro M - p.230Kalibro L - p.231
interiorinterni
320
Giunzione a L destra.Disponibile in bianco o nero
Right L connector.Supplied white or black.
codice/code
MSMA0031BI - bianco/whiteMSMA0030NE - nero/black
Giunzione flessibile.Disponibile in bianco o nero
Flexible connector.Supplied white or black.
codice/code
MSMA0020BI - bianco/whiteMSMA0016NE - nero/black
Giunzione a L sinistra.Disponibile in bianco o nero
Lef t L connector.Supplied white or black.
codice/code
MSMA0033BI - bianco/whiteMSMA0032NE - nero/black
65
65
175
65
65
Alimentazione con tappoterminale destra. Disponibile bianco o nero.
Right feeding with end-cap.Supplied white or black.
codice/code
MSMA0022BI - bianco/whiteMSMA0012NE - nero/black
Alimentazione con tappoterminale sinistra. Disponibile in bianco e nero.
Left feeding with end-cap.Supplied white o black.
codice/code
MSMA0027BI - bianco/whiteMSMA0026NE - nero/black
32
491
68
32
4
68
91
321
Cavo di sospensione in acciaio. Diametro - 1,5mm/ Lunghezza - 1,5m.
Steel suspended cable.Diameter - 1,5mm/ Length - 1,5m.
codice/code
MSMA0018
Wire gripper per sospensione rapida.
Wire gripper for faster suspension.
codice/code
MSMA0017
Staffa sospensione il alluminio.
Aluminum suspended bracket.
codice/code
MSMA0015AL
Rosoncino con staffa. Disponibile in bianco o grigio.
White rosette with bracket.Supplied white o grey.
codice/code
MSMA0024BI - bianco/whiteMSMA0019GR - grigio/grey
Utensile curva cavi post taglio binario.
Tool for bending cables/outing track.
codice/code
MSMA0035
31
13
30
52,25
10
L=1,5 m
45,5 30
Altri accessori disponibili a richiesta. / Additional accessories on demand.
interiorinterni
324
centralina da muro DMX
wall pilote station for DMX system
324
È una centralina da muro che consente di pilotare gli apparecchi predisposti per la gestione del cambio di colore con si-stema DMX.Può essere alloggiata in una normale scatola standard da incasso a parete, e consente di vi-sualizzare la sequenza tramite un LED RGB posi-zionato sul frontalino. Viene fornita con una serie di programmi preimpostati che consentono di ottenere cinque diversi show che vanno dalla ac-censione dei differenti colori in sequenza a quella miscelata con un passaggio lento tra le varie to-nalità cromatiche. Consente inoltre di dimmerare singolarmente ciascun canale, fattore molto im-portante se si decide di utilizzare la centralina con faretti o apparecchi LED a luce monocromatica. È inoltre possibile selezionare fra tre differenti ve-locità di esecuzione degli show e gestire le fun-zioni tramite telecomando (opzionale).
It is a wall pilote station ables to pilote fittings arranged for colour changing with DMX system.It can be installed in a stardard box for recessing mounting and it is able to visualize the sequence through a RGB LED placed on the front. It is supplied with a certain presetted programs, in order to get five shows, starting from a switching on of different colours as a sequence to a mixed run of all chromatic shades. It can dimm each channel individually. It is an important factor if you decide to use the wall pilote station with spots or LED fittings with monochromatic light. You can select among three different speeds of show performance and manage the functions with a remote control (optional).
disegni tecnici/technical drawings
80
117
9850
58,5
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
WMASTERDMX/INC
materiale/material
alluminio/
aluminum
accessori/accessories
telecomando/
remote control
IP/IP
20
fissaggio/*fixing
incasso a parete/
wall recessing
IP20 RGBDMX
master DMX
show preimpostati/programmed show
Show n. 2
Show n. 4
Show n. 5
Show n. 3
effetto visuale/visual effect
multicolore/multi-coloured
multicolore/multi-coloured
Tonalità calde/warm colours
Tonalità fredde/cold colours
Canali RGB sincronizzati/RGB syncronized channels
esempi di schemi di collegamento a pag. 00/ example of wiring diagrams on pag 00
* da installare tramite scatola di fissaggio a muro (3 moduli) non fornita/ to use with surface mounting box (3 module) not supplied
accensione in sequenza/switch-on sequence
accensione miscelata/switch-on mixed
accensione miscelata/switch-on mixed
accensione miscelata/switch-on mixed
per dimmerare bianco - colore/to dim white/colour
Show n. 1
230V
centralina da muro COLOR DMX
wall pilote station COLOR DMX
325
È una centralina da muro che consente di pilotare gli apparecchi predisposti per la gestione del cambio di colore con si-stema DMX .Permette la scelta tra un’infinita varietà di colori, con un semplice tocco, grazie all’anello di co-lori studiato per favorire l’interazione dell’utente con il sistema. Il cambio colore si può effettuare semplicemente sfiorando l’anello di colori. Possi-bilità di memorizzare due colorazioni utilizzando il pannello frontale. Prevede la variazione della completa gamma cromatica su faretti Ilti Luce controllati da sistema DMX. Consumo Max 10W.Alimentatore WALIMCOLORWHEEL da ordinare separatamente.
The WCOLORWHEEL DMX user interface panel provides direct access for selecting a specific color point on full-color DMX RGB lighting systems.Direct access to a specific color point is provided via a touch-sensitive backlit RGB color selection ring. The selected color can be stored in one of the two user-defined presets available on the front of the panel. Power max 10W. WALIMCOLORWHEEL needs to be ordered separately.
disegni tecnici/technical drawings
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
WCOLORWHEEL
finitura/finishing
bianco lucida/
glossy white
IP/IP
20
fissaggio/*fixing
staffe a muro (incasso)/
wall recessing (recessed)
IP20 RGBDMX
* da installare tramite scatola di fissaggio a muro (2 moduli) non fornita/ to use with surface mounting box (2 module) not supplied
90
90
36 140
65
11
23 19
Alimentatore - intefaccia DMX/ Driver - DMX interface
codice/code
WALIMCOLORWHEEL
dimensioni/dimension
140x65x36 (h)
È una centralina da muro che consente di pilotare gli apparecchi predisposti per la gestione del cambio di tonalità di co-lore bianco con sistema DMX. Permette la scelta tra una tonalità bianca calda ed una tonalità bianca fredda ed un’infinità di tonalità intermedie e miscelate, con un sempli-ce tocco, grazie all’anello di colori studiato per favorire l’interazione dell’utente con il sistema. Il cambio di tonalità si può effettuare semplicemen-te sfiorando l’anello di colori. Prevede la variazio-ne di tonalità colore su faretti Ilti Luce predisposti per una variazione di tonalità colore. Consumo Max 10W. Alimentatore WALIMCOLORWHEEL da ordinare separatamente.
The WCOLORWHEELCT DMX user interface panel is designed for intuitive control of color temperature variation on DMX lighting systems.Direct access to a specific color point is provided via a touch-sensitive backlit color temperature selection ring. The selected color can be stored in one of the two user-defined presets available on the front of the panel. Power max 10W. WALIMCOLORWHEEL needs to be ordered separately.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
WCOLORWHEELCT
Alimentatore - intefaccia DMX/ Driver - DMX interface
codice/code
WALIMCOLORWHEEL
dimensioni/dimension
140x65x36 (h)
disegni tecnici/technical drawings
90
90
36 140
65
11
23 19
finitura/finishing
bianco lucida/
glossy white
IP/IP
20
fissaggio/*fixing
staffe a muro (incasso)/
wall recessing (recessed)
326326
centralina da muro COLOR TEMPERATURE DMX
wall pilote station COLOR TEMPERATURE DMX
IP20 DMX
* da installare tramite scatola di fissaggio a muro (2 moduli) non fornita/ to use with surface mounting box (2 module) not supplied
IP/IP
40
40
40
fissaggio/fixing
con viti/ with screws
con viti/ with screws
con viti/ with screws
slave DMX
slave DMX
Interfaccia DMX con uscita in corrente per sistemi LED ad alta potenza o siste-mi lineari RGB.Questo componente elettronico può essere uti-lizzato in abbinamento ai Master DMX presenti in questo catalogo o a console DMX professionali.IP40 ,per utilizzo in interni è fornito di corpimor-setto e serracavo. DMX mode tramite morset-tiera per il collegamento basato sul protocollo DMX512 , lo slave è dotato di Dip switch per impostazione indirizzi. Input 12/24V. Il fissaggio dello Slave avviene tramite asole per viti.
Disponibile in tre versioni:WSLAVEDMX6X3 – per sistemi LED – uscita in corrente costante 350mAWSLAVEDMX6X3R – per sistemi LED – uscita in corrente costante 700mAWSLAVEDMX12/24V – per sistemi lineari LED – uscita in tensione costante 10/30V
DMX interface with current output for power LED systems or RGB linear systems.This electronic component can be used in combination with Master DMX in this catalogue or with professional DMX console. IP40, for indoor use the slave is supplied with terminal cover and cable retainer. DMX mode based on DMX512 Standard, it is equipped with a Dipswitch for setting DMX address. Input 12/24V. Slave DMX can be secured with slot for screws.
Available in 3 versions:WSLAVEDMX6X3 – high power LEDs – constant current output 350mAWSLAVEDMX6X3R – high power LEDs – con-stant current output 700mAWSLAVEDMX12/24V – LED linear systems – constant voltage output 10/30V
disegni tecnici/technical drawings
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
WSLAVEDMX6X3
WSLAVEDMX6X3R
WSLAVEDMX12/24V
materiale/material
plastica/ plastic
plastica/ plastic
plastica/ plastic
71,5 119
33,5
327
telecomando
remote control
tappo terminale DMX
end-cap DMX
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
WTELEC-RGB
materiale/material
plastica/ plastic
adatto per/suitable for
WMASTERDMX/INC
WMASTERRGB5X3I
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
QDMX-512/CAP
caratteristiche/specifications
resistenza terminale 120 ohm/
terminal resistance 120 ohm
dimensioni/dimension
25x5x3 mm
adatto per/suitable for
WSLAVEDMX6X3
WSLAVEDMX6X3R
WSLAVEDMX12/24V
Questo telecomando consente di gestire la centralina DMX e il WMASTERRGB5X3I con sensore.Oltre alla possibilità di scegliere il colore della luce, permette di selezionare diverse gradazioni e in-tensità. Inoltre è possibile operare una scelta su diversi programmi di movimento della luce e di intermittenza.
This remote control enables to control the DMX control panel and the WMASTERRGB5X3I with sensor. In addition to the possibility to choose the color of the light, with a selection among gradings and intensity. It’s possible to make a choice about different light movement programs and switching programs.
Tappo terminale DMX.Resistenza 120W che chiude il sistema DMX per impedire interferenze con l’ambiente circostante.
DMX end cap.Resistance 120W to close the DMX system to avoid interferences.
328328
cavo segnale DMX
signal cable DMX
amplificatore di segnale
signal amplifier
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
WAMPL/SIGNAL-DMX
materiale/material
plastica/ plastic
dimensioni/dimension
88x90x58 (h)
input
9-48V
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
QDMX512/CABLE-A
QDMX512/CABLE-B
caratteristiche/specifications
cavo segnale 24 AWG per DMX/signal cable 24 AWG for DMX
cavo segnale 24 AWG per DMX/signal cable 24 AWG for DMX
lunghezza/lenght
3 m
10 m
Questo prodotto è uno splitter a 6 canali DMX con un ingresso DMX e 6 uscite DMX (max 30 slaves, TOT. 180). L’unità divide il segnale DMX in ingresso in sei canali separati di uscita. Ciascun canale di uscita e di ingresso è completamente isolato elettronicamente dagli altri e tutti i sei canali di uscita hanno driver d’uscita indipendente per amplificare il segnale DMX. Installazione a parete o binario DIN. This product is a six channel DMX booster with one DMX input and six DMX outputs (max 30 slaves, TOT. 180). This unit takes the incoming DMX signal and splits the signal into six separate output channels. Each output channel and input channel are completely electronically isolated from each other, all six output channels have independent output drivers to boost the DMX signal. Surface mount or DIN rail monted.
Cavo segnale tre poli 24 AWG per DMX. Disponibile in due differenti lunghezze: 3 o 10 metri.
3 poles signal cable 24 AWG per DMX. Available in two different lengths: 3 or 10 meters.
IP20
IP/IP
20
329
Centralina di controllo colore RGB. Dimmerabilità separata per ogni canale con ap-posito potenziometro o telecomando IR direzio-nato verso il sensore. Fornita con tre programmi preimpostati a colori variabili (arcobaleno, colori caldi, colori freddi), selezionabili con apposito ta-sto. Possibilità di memorizzazione del colore/pro-gramma allo spegnimento, anche in assenza di rete. Possibilità di sincronizzazione con l’utilizzo di Slave RGB. Input: 24V DC. Output current: 350mA. Cavi in ingresso: sez max 1,5 mmq. Dimensioni: 67x103x30.
RGB color control console. Each color can be controlLED with a dimming (1-10V) potentiometer or IR remote control. Supplied with three pre-sets with variable colors (rainbow colors, warm colors and cool colors). Internal storage capacity of the color/program in case the controller is switched off or in absence of the network. Ability to synchronize with the RGB slave. Input: 24V DC. Output current: 350mA. Input cables: sez max 1,5 mmq. Dimensions: 67x103x30.
centralina master RGB
RGB pilote station
slave RGB
slave RGB
Questo componente elettronico può es-sere utilizzato in abbinamento alla Centra-lina Master RGB. Ciò consente di ricevere il segnale dal master per comunicare con gli apparecchi RGB che si voglio-no controllare in cascata. Connessione in serie per massimo n. 5 faretti LED 3x1W. Possono essere collegati un massimo di 99 Slave al Master RGB per un controllo fino a 500 faretti RGB 3x1W.Input: 24V DC. Output current: 350mA. Cavi in ingresso: sez max 1,5 mmq. Dimensioni: 67x103x30.
This electric component is in combination with the Console Master RGB. It receives the signal from Master to communicate with the RGB Luminaires. Series connection up to 5 LED spots 3x1W. Possibility to connect up to 99 Slaves to a RGB Master to drive and up to 500 RGB spots 3x1W. Input: 24V DC. Output current: 350mA. Input cables: sez max 1,5 mmq. Dimensions: 67x103x30.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
WSLAVERGB5X3
materiale/material
plastica/ plastic
materiale/material
plastica/ plastic
utilizzabile con/to use with
WMASTERRGB5X3I
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
WMASTERRGB5X3I
utilizzabile con/to use with
WTELEC-RGB
330330
Kit vetrine ricaricabile
windows kit rechargeable
Il Kit è dotato di 2 batterie 12V/24Ah, una scheda inverter e un carica batterie 24V.Le batterie (1) se completamente cariche man-tengono il Kit acceso per 45 ore con 10 LED (2) da 1W/350 mA; una volta scariche devono essere immediatamente ricaricate: il tempo di ricarica è di 15 ore circa; sopportano fino a 250 cicli di ricari-ca. Il carica batterie (3) può essere attivo anche con l’impianto acceso. L’interruttore (4) deve essere collegato a monte alla scheda inverter (5). Non collegare l’interruttore in serie ai LED.
The kit is composed by 2 batteries 12V/24Ah, an inverter card and a battery charger 24V. The batteries (1) when completely charged, can operate for 45 hours with 10 LED (2) 1W 350mA, when the battery is running empty you should charge the unit immediately, charging time is approximately 15 hours, Unit can be recharged up to 250 times. The battery charger (3) can charge when Luminair is operationaln. The switch (4) must be connected to the inverter card (5). Do not connect the switch to the LED in series.
Input: 24V DCOutput: 350mAMax 10 LED 1W
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BKITBATLED
adatto per/suitable for
10 LED 1W 350mA
331
batteria12 V - 24 Ah
batteria12 V - 24 Ah
-
+
-
+
scheda inverterdotato di fusibile interno
+
-
+
-
caricabatterie 24V
interruttore
rete 100 - 240V
1
1
4
3
52
lisadisk
lisadisk
sagome
templates
Lisadisk è un disco in LISA con finalità deco-rative applicabile ai faretti della famiglia LUX per incasso.
Lisadisk is a disk with decorative purposes to add on the Lux spots.
Sagome sono degli elementi decorativi in acciaioinox applicabili alla famiglia dei faretti LUX. Sagoma 01, 02 e 03 sono standard, 04 e 05 sonoa richiesta.
Templates are decorative elements in stainlesssteel applicable to the Lux family spots. Template 01, 02, 03 are standard, 04 and 05 are on demand.
3Ø 54
disegni tecnici/technical drawings
disegni tecnici/technical drawings
tabella di riepilogo prodotti/ product overview table
tabella di riepilogo prodotti/ product overview table
parete - soffitto/ wall- ceiling
LISADISK
faretto/spot
schema incasso LISADISK/ diagram LIDASDISK
schema incasso Sagome/ diagram decorative rims
codice/code
BLUXDISCOLISARO
BLUXDISCOLISAVE
BLUXDISCOLISABL
materiale/material
lisa rossa/ red lisa
lisa verde/ green lisa
lisa blu/ blue lisa
adatto per/suitable for
Lux 01, 02, 03_10°, 03_25°, 05, 07_110°, 07_60°,07_25°, 07_10°
Lux 01, 02, 03_10°, 03_25°, 05, 07_110°, 07_60°, 07_25°, 07_10°
Lux 01, 02, 03_10°, 03_25°, 05, 07_110°, 07_60°, 07_25°, 07_10°
prodotto/product
codice/code
BLUXSAG01
BLUXSAG02
BLUXSAG03
BLUXSAG04
BLUXSAG05
materiale/material
acciaio inox/stainless steel
acciaio inox/stainless steel
acciaio inox/stainless steel
acciaio inox/stainless steel
acciaio inox/stainless steel
adatto per/suitable for
Lux 01, 02, 03_10°, 03_25°, 05, 07_110°, 07_60°, 07_25°, 07_10°
Lux 01, 02, 03_10°, 03_25°, 05, 07_110°, 07_60°, 07_25°, 07_10°
Lux 01, 02, 03_10°, 03_25°, 05, 07_110°, 07_60°, 07_25°, 07_10°
Lux 01, 02, 03_10°, 03_25°, 05, 07_110°, 07_60°, 07_25°, 07_10°
Lux 01, 02, 03_10°, 03_25°, 05, 07_110°, 07_60°, 07_25°, 07_10°
prodotto/product
60
59
60 Ø 60
70
60 Ø 65
parete - soffitto/ wall- ceiling
sagome/ decorative rims
faretto/spot
332332
01 02 03 04 05
cassaforme
boxes
Le cassaforme Luxcassa e Boxskill sono acces-sori indispensabili per l’incasso dei faretti a terra, in alternativa alle molle in dotazione che servono per l’applicazione a controsoffittature.
The boxes Luxcassa and Boxskill are accessories useful to recess the spots in a floor, as alternative of the springs useful for installations in falseceilings.
disegni tecnici/technical drawings
tabella di riepilogo prodotti/ product overview tablecodice/code
BLUXCASSA1
BLUXCASSA3
BLUXCASSA5
BLUXCASSA6
QBOXSKILL1
QBOXSKILL2
materiale/material
ABS
ABS
ABS
geberit
alluminio/aluminum
alluminio/aluminum
adatto per/suitable for
Lux 09_110°, 09_60°, 10, 11, 35, 09_110° TF, 09_60° TF,10 TF, 11 TF, 35...
Lux 20_25°, 20_25° RGB, 20_10°, 20_10° RGBLux 20_25° TF, 20_25° RGB TF, 20_10° TF, 20_10° RGB TF...
Lux 12, Lux 12 TF, Lux 36...
Lux 32, Lux 32 RGB...
Lux 29_25°, 29_25°RGB, 29_10°, 29_10° RGBSkilled 01, 02, 03, 03 RGB, 04...
Skilled 01, 02, 03, 03 RGB, 04...
prodotto/product
Ø 36
Ø 44
Luxcassa1
Luxcassa1
Luxcassa6
Luxcassa6
Luxcassa5
Luxcassa5
Boxskill1
Boxskill1
Luxcassa3
Luxcassa3
Boxskill2
Boxskill2
Ø 111 Ø 142 Ø 185
Ø 155
120 10058,5
Ø 26 Ø 49
Ø 57Ø 20,8
6245 67
333
VERIFICARE A FONDO CATALOGO LE INDICAZIONI PER L’UTILIZZO DEI FARETTI IN IMMERSIONE (P.359)./PLEASE REFER TO THE END OF THIS CATALOGUE FOR THE APPLICATION OF IP68 SPOTS (P.360).
!
accessori Daf
Daf accessories
Le cassaforme per la serie Daf sono accessori in materiale plastico adatte ad essere incassate e ce-mentate nel muro per agevolare l’installazione delle lampade DAF. Il foro deve essere realizzato in modo da consentire il posizionamento del lato con la bor-datura esterna verso l’interno del foro, in modo che abbia una migliore tenuta.
Wall recessing box for Daf range made of plastic and used for an easier installation. The hole should be made so as to place the external face of box at the bottom of the hole, for a better fixation.
Kit abbinabile a Daf 04, composto da 7 pittogram-mi ritraenti le indicazioni in figura.
Kit combined with Daf 04, composed by 7 pictograms depicting the information in picture
codice/code
MDAFCASSA1
MDAFCASSA2
MDAFCASSA3
materiale/material
ABS
ABS
ABS
adatto per/suitable for
DAF 01
DAF 02
DAF 03
prodotto/product
tabella di riepilogo prodotti/ product overview table
disegni tecnici/technical drawings
Cassaforma/ Box Daf01
Cassaforma/ Box Daf01 Metodo di installazione cassaforme Daf/ Daf boxes method of installation
Cassaforma/ Box Daf02
Cassaforma/ Box Daf02
Cassaforma/ Box Daf03
Cassaforma/ Box Daf03
kit pittogrammi
kit pittogrammi
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
MDAFPITTOKIT07
caratteristiche/specifications
kit composto da 7 pittogrammi/
kit composed by 7 pictograms
utilizzabile con/to use with
Daf04
90
95
139
90
139
139
186
139
90
334334
tabella di riepilogo prodotti/ product overview table
disegni tecnici/technical drawings
fissaggio
fixation
22
150
Schema fissaggio tramite picchetto BLUXPICCHETTO/Diagram with BLUXPICCHETTO Peg
faretto/ spot
picchetto/ peg
BLUXPICCHETTO
faretto/ spot
attacco/ fastening
Schema fissaggio tramite BLUXATT/Diagram with BLUXATT
BLUXATT
20
23
BLUXSNODO
MBLESTAFFA
BLUXCHIAVE32
FPOZZETTO
13
60
Ø 30
codice/code
BLUXPICCHETTO
BLUXATT
BLUXSNODO
MBLESTAFFA
BLUXCHIAVE32
FPOZZETTO
materiale/material
acciaio inox/stainless steel
alluminio/aluminum
alluminio-cromo/ aluminum-chrome
alluminio/aluminum
acciaio/steel
ABS
adatto per/suitable for
Lux 13, 25_25°, 25_25° RGB, 25_10°, 25_10° RGB, 34, 33, 33 RGB...
Lux 13, 25_25°, 25_25° RGB, 25_10°, 25_10° RGB, 34, 33, 33 RGB...
Illuminatore LED 01/LED Light-box 01
Bled
Lux 32, 32 RGB, 32R, 32R RGB
Flexus LED
prodotto/product
70 50
80
130
3
104
93
15
200 190
190
335
testate walk movie
walk movie end-caps
codice/code
BMOVIEHEAD/01/N
BMOVIEHEAD/02/N
materiale/material
alluminio anod. nero/black anodized aluminum
alluminio anod. nero/black anodized aluminum
adatto per/suitable for
Walk Movie LED, Walk Movie SlimElettroluminescenza/Electroluminescence
Walk Movie LED, Walk Movie SlimElettroluminescenza/Electroluminescence
prodotto/product
tabella di riepilogo prodotti/ product overview table
tabella di riepilogo prodotti/ product overview table
accessori appendiabiti LED
LED dresshanger accessories
77 77
30 301,5 1,5
disegni tecnici/technical drawings
disegni tecnici/technical drawings
testata standard/ standard end-cap
BMOVIEHEAD/01/N BMOVIEHEAD/02/N
testata sagomata/ shaped end-cap
codice/code
FATTACCOAA
FATTACCOOS
FSOSTEGNOAA
materiale/material
alluminio anodizzato/ anodized aluminum
ottone satinato/ sanded brass
alluminio anodizzato/ anodized aluminum
adatto per/suitable for
appendiabiti LED/ LED dresshanger
appendiabiti LED/ LED dresshanger
appendiabiti LED/ LED dresshanger
prodotto/product
Ø 30
93
10
Ø 50
18
Coppia di ghiere. Disponibile in alluminio anodizzato FATTACCOAA o in ottone satinato FATTACCOOS
Pair of end-caps for LED dresshanger.Available in anodised aluminum FATTACCOAA or sanded brass FATTACCOOS
336336
tabella di riepilogo prodotti/ product overview table
disegni tecnici/technical drawings
accessori walk system
walk system accessories
Elementi vuoti di varie differenti lunghezze forniti di protezione in policarbonato trasparente. N.B.: Per l’alimentazione utilizzare un solo alimenta-tore/giunto, che consiste in una connessione all’in-terno del profilo.
Empty profiles in aluminum of different lengths with protection in clear polycarbonate.NOTICE: for feeding please use only one feeder/joint inside the profile.
codice/code
BWALK950
BWALK1900
BWALK3800
BWALK1000
BWALK2000
BWALK3000
WALIM-LED05
BTAPELEDALIM
codice/code
BWALKSTAFFA
lunghezza/lenght
950
1900
3800
1000
2000
3000
alim./feeding 50
alim./feeding 50
materiale/material
acciaio inox/stainless steel
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
adatto per/suitable for
Walk System LED 01, 02, 04,Walk Slim Elettroluminescenza/Electroluminescence
prodotto/product
prodotto/product
codice/code
BWALK/R950
BWALK/R1900
BWALK/R3800
BWALK/R1000
BWALK/R2000
BWALK/R3000
WALIM-LED/R05
BTAPELEDALIM
lunghezza/lenght
incasso/recessed 950
incasso/recessed 1900
incasso/recessed 3800
incasso/recessed 1000
incasso/recessed 2000
incasso/recessed 3000
alim. incasso/rec. feeding 50
alim. incasso/rec. feeding 80
materiale/material
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
alluminio/aluminum
prodotto/product
profili vuoti/ external profile profili vuoti ad incasso/ recessed profile
staffa di fissaggio rapido/ fast-fixing bracket
68
39 17
337
L max 200
3722
22
92
37
3763
117,5
50
151
50
staffe velis
velis brackets
staffe soul light
soul light brackets
codice/code
OVE-CAVO1 +STAF
OVE-PLAF+STAF
OVE-STAFPAR
OVE-ANG+STAF
materiale/material
acciaio inox/stainless steel
acciaio inox/stainless steel
acciaio inox/stainless steel
acciaio inox/stainless steel
adatto per/suitable for
Velis
Velis
Velis
Velis
tipologia/type
sospensione/ suspension bracket
plafone/ ceiling bracket
parete/ wall bracket
angolare/ angle bracket
prodotto/product
tabella di riepilogo prodotti/ product overview table
disegni tecnici/technical drawings
disegni tecnici/technical drawings
OVE-CAVO1+STAF
OVE-PLAF+STAF
OVE-STAFPAR
OVE-ANG+STAF
Kit di sospensione con cavi L=2 m, grippers, due staffe/Suspension bracket kit with cableL=2 m, grippers, two brackets
Staffe per il fissaggio a pavimento di Soul Light.Ne permettono la stabilità, l’orientabilità ed il fissag-gio sulla posizione/orientamento desiderato tramite manopole.
Brackets for surface mounting of Soul Light. Allowing stability in orientation and fixation in the desired position by means of quick release/lock handles.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
BSOUL/PIEDE/NE
materiale/material
alluminio/ aluminum
utilizzabile con/to use with
Soul Light
Attacco a plafone, coppia di staffe/Root/ ceiling bracket, brackets included
Attacco a parete, coppia di staffe/Wall bracket, brackets included
Blocchetto per angolo, coppia di staffeAngle bracket, brackets included
35
280
338338
codice/code
BBOKGIUNTO
BBOKGIUNTO-RGB
BBOKALIMPG7
BBOKALIMPG7-RGB
BBOKTAPPO
adatto per/suitable for
Miniflux - Miniflux HP
Miniflux RGB - Miniflux HP RGB
Miniflux - Miniflux HP
Miniflux RGB - Miniflux HP RGB
Miniflux - Miniflux HP- Miniflux RGB - Miniflux HP RGB
prodotto/product
tabella di riepilogo prodotti/ product overview table
disegni tecnici/technical drawings
BBOKGIUNTO-RGB
BBOKGIUNTO
BBOKALIMPG7-RGB
BBOKALIMPG7
BBOKTAPPO
accessori per miniflux
miniflux accessories
Giunto di connessione per effettuare linee continue. Disponibile per Miniflux luce bianca o in versione RGB. Comprende i cavi per il cablaggio.
Connection joint for the creation of continuous lines. Available for Miniflux in white or RGB versions. Connecting wires included.
Giunto di connessione RGB per linea continua.
Connection joint for the creation of continuous lines.
Alimentazione RGB con pressacavo PG7.
RGB feeding with cable gland PG7.
Tappo di chiusura.
End-cap.
caratteristiche/specifications
giunto/ joint
giunto RGB/ RGB joint
alimentazione/ feeding
alimentazione RGB/ RGB feeding
tappo di chiusura/ end-cap
Alimentazione per Miniflux. Da utilizzare quando, da tagli del profilo, si vogliono ottenere più tratti di Mi-niflux. Disponibile per Miniflux luce bianca o in ver-sione RGB. Utilizzabile anche per effettuare curve in linea continua. Alimentazione con pressacavo PG7.
Feeder Unit for Miniflux. To use when the profile is to be cut to the desired length. Available in white or RGB versions. Suitable also for curved continuous connection. Feeding with cable gland PG7.
3
23
3
23
30
30
339
3
13
350mA faretti 1,2W
350mA 1,2W spots
schemi di collegamento/
wiring diagram
alimentatore/feeder
WALIMLED01350
1 faretto LED 1W/1 spots LED 1W
32x34x25(h) - 1W - 350mA
alimentatore/feeder
WALIMLED03350
fino a 3 faretti LED 1W/
Up to 3 spots LED 1W
41x43x23(h) - 3W - 350mA
alimentatore/feeder
WALIMLED08350
fino a 8 faretti LED 1W/
Up to 8 spots LED 1W
40x100x27(h) - 10W - 350mA
alimentatore/feeder
WALIMLED12350
fino a 12 faretti LED 1W/
Up to 12 spots LED 1W
138x39x28(h) - 15W - 350mA
alimentatore/feeder
WALIM/DIMM/JOLLY
fino a 12 faretti LED 1W/
Up to 12 spots LED 1W
15W - 350mA **
variatore/current variation
WBOKVAR
80x80x60 - 1 - 10V
A
A
B
C
D
E
B
C
D
E
VAR
110V
220V
110V
220V
110V
220V
110V
220V
110V
220V
L
L
L
L
L
N
N
N
N
N
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
faretti 1W/1W spots
* sezione cavo 2x1mm / cable section 2x1mm.
** alimentatore multipotenza fornito di dip-switch per la selezione della corrente in uscita / Multi-power driver supplied with dip-switch for the selection of the output current
VAR
342342
+
-
+-
+-
+-
+
-
+-
+-
+-
+-
+-
+-
+-
+-
+
-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+
-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
350mA faretti 3x1,2W
350mA 3x1,2W spots
schemi di collegamento/
wiring diagram
VAR
110V
220V
110V
220V
110V
220V
110V
220V
L
L
L
L
N
N
N
N
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
Faretti 3x1W/3x1W spots
* sezione cavo 2x1mm / cable section 2x1mm.
** alimentatore multipotenza fornito di dip-switch per la selezione della corrente in uscita / Multi-power driver supplied with dip-switch for the selection of the output current.
alimentatore/feeder
WALIMLED03350
1 faretto LED 3x1W/1 spot LED 3x1W
41x43x23(h) - 3W - 350mA
alimentatore/feeder
WALIMLED08350
fino a 2 faretti LED 3x1W/
Up to 2 spots LED 3x1W
40x100x27(h) - 10W - 350mA
alimentatore/feeder
WALIMLED12350
fino a 4 faretti LED 3x1W/
Up to 4 spots LED 3x1W
138x39x28(h) - 15W - 350mA
alimentatore/feeder
WALIM/DIMM/JOLLY
fino a 4 faretti LED 3x1W/
Up to 4 spots LED 3x1W
15W - 350mA **
variatore/current variation
WBOKVAR
80x80x60 - 1 - 10V
B
B
C
D
D
C
D
E
343
+
-
+-
+
-
+-
+-
+
-
+-
+-
+-
+-
-+
-
+-
+-
++-
* 20 mt (40 mt totali)VAR
faretti 4x2W/4x2W spots
* sezione cavo 2x1mm² / cable section 2x1mm².
** alimentatore multipotenza fornito di dip-switch per la selezione della corrente in uscita / Multi-power driver supplied with dip-switch for the selection of the output current
alimentatore/feeder
WALIMLED04500
1 faretto LED 4x2W/1 spot LED 4x2W
500mA
alimentatore/feeder
WALIMLED08500
fino a 2 faretti LED 4x2W/
up to 2 spots LED 4x2W
500mA
alimentatore/feeder
WALIM/DIMM/JOLLY
fino a 2 faretti LED 4x2W/
up to 2 spots LED 4x2W
500mA **
variatore/current variation
WBOKVAR
80x80x60 - 1 - 10V
M
N
E
M
N
E
110V
220V
110V
220V
110V
220V
L
L
L
N
N
N
* 20 mt (40 mt totali)
VAR
500mA faretti 4x2W
500mA 4x2W spots
schemi di collegamento/
wiring diagram
344
+
-
+-
+
-
+-
+-
+
-
+-
+-
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)VAR
+
-
+-
+
-
+-
+-
+-
+
-
+ +-
+- -
+-
+-
+
-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+
-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+
-
+-
+-
+-
+-
+-
+-
+-
+-
alimentatore/feeder
WALIMLED1700
1 faretto LED 2,5W/1spot LED 2,5W
50x32x18(h) - 2,5W - 700mA
alimentatore/feeder
WALIMLED03700
fino a 3 faretti LED 2,5W/
up to 3 spot LED 2,5W
115x34x20(h) - 10W - 700mA
alimentatore/feeder
WALIMLED05700
fino a 5 faretti LED 2,5W/
up to 5 spot LED 2,5W
111x38x21(h) - 15W - 700mA
alimentatore/feeder
WALIMLED12700
fino a 12 faretti LED 2,5W/
up to 12 spot LED 2,5W
138x39x28(h) - 36W - 700mA
F
G
H
I
F
G
H
I
110V
220V
110V
220V
110V
220V
110V
220V
L
L
L
L
N
N
N
N
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
* 20 mt (40 mt totali)
alimentatore/feeder
WALIMLED12700D
fino a 12 faretti LED 2,5W/
up to 12 spots LED 2,5W
138x39x28(h) - 36W - 700mA
variatore/current variation
WBOKVAR
80x80x60 - 1 - 10V
alimentatore/feeder
WALIM/DIMM/JOLLY
fino a 8 faretti LED 2,5W/
up to 8 spots LED 2,5W
25W - 700mA
variatore/current variation
WBOKVAR
80x80x60 - 1- 10V
L
E
VAR
VAR
L
E
110V
220V
110V
220V
L
L
N
N
VAR
VAR
* sezione cavo 2x1mm²/ cable section 2x1mm².
** alimentatore multipotenza fornito di dip-switch per la selezione della corrente in uscita / Multi-power driver supplied with dip-switch for the selection of the output current
700mA faretti 2,5W
700mA 2,5W spots
schemi di collegamento/
wiring diagram
345
alimentatore/feeder
WALIMLED008350
fino a 1 faretti Exalight/
up to 1 spots Exalight
40x100x27(h) - 10W - 350mA
alimentatore/feeder
WALIMLED12350
fino a 2 faretti Exalight/
up to 2 spots Exalight
138x39x28(h) - 15W - 350mA
alimentatore/feeder
WALIM/DIMM/JOLLY
fino a 2 faretti Exalight/
up to 2 spots Exalight
15W - 350mA **
variatore/current variation
WBOKVAR
80x80x60 - 1 - 10V
alimentatore/feeder
WALIMLED100/24
prodotti con circuito integrato 24V/
product with internal driver 24V
connessione in parallelo (es. Lux 32)/
parallel connection (ex. Lux 32)
Products: MAGO / KALIBRO / EXPO / FIBRALED HP /
VELIS LED / BLED LED / LUX 32 / LUX 33 / ...
C
D
E
VAR
24V DC
24V DC
C
D
110V
220V
110V
220V
L
L
N
N
* 20 mt (40 mt totali)
* sezione cavo 2x1mm²/ cable section 2x1mm².
** alimentatore multipotenza fornito di dip-switch per la selezione della corrente in uscita / Multi-power driver supplied with dip-switch for the selection of the output current
* 20 mt (40 mt totali)
L110V
220V
110V
220V
L
L
N
N
VAR
350mA faretti 6x1,2W/ sistemi 24V
350mA - 6x1,2Wspots/ 24V systems
schemi di collegamento/
wiring diagram
346
+
-
-+
+
-
+-
+-
-+
-
+-
+
+-
* 20 mt (40 mt totali)
10 mtmax
10 mtmax
10 mtmax
alimentatore/feeder
WALIMLED09W12V
prodotti con nastro LED 12V/
product with 12V strip LED
35x73x18(h) - 9W - 12V
alimentatore/feeder
WALIMLED09W12V
prodotti con nastro LED 12V/
product with 12V strip LED
35x73x18(h) - 9W - 12V
dimmer
WBOKOTDIM (50W max)
170x40x19 - 4W
variatore/current variation
WBOKVAR
80x80x60 - 1 - 10V
O
O
O
E
O
110V
220V
110V
220V
110V
220V
L
L
L
N
N
N
VAR
OT-DIM
OT-DIM
VAR
VAR
alimentatore/feeder
WALIM/DIMM/JOLLY
prodotti con nastro LED 12V/
product with 12V strip LED
MAX 10W - 12V
variatore/current variation
WBOKVAR
80x80x60 - 1 - 10V
E
VAR
12V sistemi lineari
12V linear system
schemi di collegamento/
wiring diagram
347
+
+
+
-
-
-
50 mm = 0,22W (1mt = 4,5W)
striscia LED 12V/12V LED strip
alimentatore/feeder
WALIMLED020/24
prodotti con nastro LED 24V/
product with 24V strip LED
20W - 24V
alimentatore/feeder
WALIMLED020/24
prodotti con nastro LED 24V/
product with 24V strip LED
20W - 24V
dimmer
WBOKOTDIM (120W max)
170x40x19 - 4W
variatore/current variation
WBOKVAR
80x80x60 - 1 - 10V
P
P
E110V
220V
110V
220V
L
L
N
N
VAR
OT-DIM
OT-DIM
VAR
VAR
alimentatore/feeder
WALIM/DIMM/JOLLY
prodotti con nastro LED 24V/
product with 24V strip LED
MAX 20W - 24V
variatore/current variation
WBOKVAR
80x80x60 - 1 - 10V
E
VAR
+-
24V sistemi lineari
24V linear system
schemi di collegamento/
wiring diagram
P
348
10 mtmax
10 mtmax
10 mtmax
+
+
-
-
75 mm = 1,2W (1mt = 16W)
striscia LED 24V/24V LED strip
P110V
220V L
N
console
WCOLORWHEELCT
DMX - 90x90x11
20W - 24V
alimentatore/feeder
WALIMCOLORWHEEL
alimentatore per WCOLORWHEELCT/RGB/
power supply unit for WCOLORWHEELCT/RGB
140x65x36
alimentatore/feeder
WALIMLED020/24
prodotti con nastro LED 24V/
product with 24V strip LED
20W - 24V
slave DMX 12/24V
WSLAVEDMX12/24V
120x72x35
alimentatore/feeder
WALIMLED020/24
prodotti con nastro LED 24V/
product with 24V strip LED
20W - 24V
dimmer
WBOKOTDIM (24V - 120W max)
170x40x19 - 4W
variatore/current variation
WBOKVAR
80x80x60 - 1 - 10V
W
P
P
S2
W
P
P
S2
110V
220V
110V
220V
110V
220V
L
L
L
N
N
N
5mt
segnale DMX/ DMX signal
VAR
OT-DIM
5mt
OT-DIM
OT-DIM
VAR
VAR
WW
CW
24V twin LED sistemi lineari
24V twin LED sistemi lineari
schemi di collegamento/
wiring diagram
349
120 mm = 1,2W (1mt = 9/10W)
striscia LED 24V Twin LED/12V Twin LED strip
+-
+-
+-
+-
alimentatore/feeder
WALIMLED020/24
fino a 1 velis LED 24V/9W/
up to 1 veli LED 24V/9W
20W - 24V
alimentatore/feeder
WALIM40W24
fino a 1 velis LED 24V/30W/
up to 1 veli LED 24V/30W
40W - 24V
alimentatore/feeder
WALIM60W24
fino a 1 velis LED 24V/40W/
up to 1 veli LED 24V/40W
60W - 24V
P
Q
R
Q110V
220V L
N
Velis: BVEL0918030_TR Bled: MBLE0218030_AA
+
P110V
220V L
N
Velis: BVEL0909030_TR
+-
-
R110V
220V L
N
Velis: BVEL0936030_TR - BVEL0927030_TR Bled: MBLE0236030_AA
20 mt. MAX
+-
24V velis LED/ bled LED
24V velis LED/ bled LED
schemi di collegamento/
wiring diagram
350
alimentatore/feeder
WALIM40W24V
fino a 1 Velis/Bled 36 LED/
up to 1 Velis/Bled 36 LED
122x65x42
master
WMASTEREGB5X3I (con sensore/with sensor)
portata ma 99 SLAVE/max load 99 SLAVE
supporta fino a 6 faretti LED 3x1W/
up to 6 spots LED 3x1W
103x67x30
slave
WSLAVERGB5X3
supporta fino a 6 faretti LED 3x1W/
up to 6 spots LED 3x1W
103x67x30
Q master RGB
master RGB
master RGB
slave RGB
slave RGB
slave RGB
slave RGB
slave RGB
slave RGB
slave RGB
Q
Q
Q
Q
110V
220V
110V
220V
110V
220V
110V
220V
L
L
L
L
N
N
N
N
10 mt. MAX
24V velis RGB/ bled RGB
24V velis RGB/ bled RGB
schemi di collegamento/
wiring diagram
351Alimentazione/Feeding
Segnale RGB/RGB signal 200 mt. TOT
Cavo 12 poli/Cables 12 wires
Cavo 6 poli/Cables 6 wires
Velis: BVEL09360256TR - BVEL09270256TR
Bled: MBLE02360256TR
Velis: BVEL09180306TR Bled: MBLE02180306TR
1235/935 mm
635 mm
fino ad un massimo di 50 apparecchi sincronizzati/
up to 50 syncronized fittings
+
+
+
+
-
-
-
-
master RGB
slave RGB
Q110V
220V L
N
fino ad un massimo di 200 apparecchi sincronizzati/
up to 200 syncronized fittings
+-
Velis: BVEL09090306TR
collegati in serie/
series connection
collegati in serie/
series connection
335 mm
fino ad un massimo di 200 apparecchi sincronizzati/
up to 100 syncronized fittings
T
T
110V
220V
110V
220V
L
L
N
N
5mt
5mt
OT-DIM
OT-DIM
OT-DIM
VAR
VAR
VAR
VAR
R
G
B
La velocità di cambio-colore può variare da 5 secondi a 10 minuti (1,3-9,8V) e rimanere fermo sul colore desiderato(>9,8V).
La possibilità di abbinare i due sistemi è a richiesta./
The speed of the colour-changing can change from 5 sec. up to 10 min. (1,3-9,8V) and be stopped on the desired colour (>9,8V).
The possibility to combine the two systems is on demand.
12V sistemi lineari RGB
12V linear system RGB
schemi di collegamento/
wiring diagram
352
+-
GRB
+-
+-
+-
+
100 mm = 0,75W (1mt = 7,5W)
striscia LED RGB/ LED strip RGB
alimentatore/feeder
WALIMLED060/12V
156x80x48(h) - 60W - 12V
Variatore/Current variation
WBOKVAR
per Bookled RGB-Miniflux RGB/
for Bookled RGB-Miniflux RGB
80x80x60 - 1-10V
dimmer
WBOKOTDIM (12V - 50W max)
170x40x19 - 4W
Sequencer
WBOKSEQUENCER (12V - 3x20W)
170x40x19 - 4W
T VAR OT - DIM
SEQUENCER
SEQUENCER
variazione manuale del cambio colore
manual changing of the colour
12V RGB LED strip
12V RGB LED strip
variazione automatica del cambio colore/
automatic changing of the colour
+-
GRBG
R
B
+++
+
La velocità di cambio-colore può variare da 5 secondi a 10 minuti (1,3-9,8V) e rimanere fermo sul colore desiderato(>9,8V).
La possibilità di abbinare i due sistemi è a richiesta./
The speed of the colour-changing can change from 5 sec. up to 10 min. (1,3-9,8V) and be stopped on the desired colour (>9,8V).
The possibility to combine the two systems is on demand.
75 mm = 1,2W (1mt = 16W)
striscia 24V HP RGB/ 24V RGB LED HP strip
24V sistemi lineari RGB
24V linear system RGB
schemi di collegamento/
wiring diagram
353
alimentatore/feeder
WALIMLED020/24V
nastro LED 24V RGB/product with 24V RGB strip LED
20W - 24 V
variatore/current variation
WBOKVAR
80x80x60 - 1-10V
dimmer
WBOKOTDIM (24V - 120W max)
170x40x19 - 4W
Sequencer
WBOKSEQUENCER (24V - 3x48W MAX)
170x40x19 - 4W
P VAR OT - DIM
SEQUENCER
P
P
110V
220V
110V
220V
L
L
N
N
5mt
5mt
OT-DIM
OT-DIM
OT-DIM
VAR
VAR
VAR
VAR
R
G
B
+-
GRB
+-
+-
+-
+
SEQUENCER
variazione manuale del cambio colore
manual changing of the colour
24V RGB LED strip
24V RGB LED strip
variazione automatica del cambio colore/
automatic changing of the colour
+-
GRBG
R
B
+++
+
alimentatore/feeder
WALIM40W24V
fino a 12 faretti LED 3x1W/ up to 12 spots LED 3x1W
122x65x42
master
WMASTEREGB5X3I (con sensore/with sensor)
portata ma 99 SLAVE/max load 99 SLAVE
supporta fino a 5 faretti 3x1W/ up to 5 spots 3x1W
103x67x30
slave
WSLAVERGB5X3
supporta fino a 5 faretti 3x1W/ up to 5 spots 3x1W
103x67x30
Q master RGB slave RGB
2 mt. (20mt MAX)
30 mt. TOT. MAX
24V faretti RGB
24V RGB spots
schemi di collegamento/
wiring diagram
354
5mt
5mt
+-
+-
Q
Q
110V
220V
110V
220V
L
L
N
N
master RGB
slave RGB
slaveRGB
slave RGB
fino ad un massimo di 50 apparecchi sincronizzati/
up to 50 syncronized fittings
Tipologia di prodotti utilizzabili con WMASTERRGB5X3I/ Kind of product to use with WSLAVERGB5X3I
max 5 spots 3x1W RGB (connessione in serie/series connection)
max 3 spots 4,6W Multichip RGB (connessione in serie/series connection)
Alimentazione/Feeding
Segnale RGB/RGB signal 200 mt. TOT
Cavo 6 poli/Cables 6 wires
master DMX
master DMX
schemi di collegamento/
wiring diagram
355
WALIMCOLORWHEEL110V
220V L
N
IN
OUT +-
WMASTERDMX/INC
console
WCOLORWHEEL
DMX - 90x90x11
10W Max
alimentatore/feeder
WALIMCOLORWHEEL
Alimentatore per WCOLORWHEEL/CT/
power supply unit for WCOLORWHEEL/CT
140x65x36
console
WMASTERDMX/INC
117x80x60
Segnale DMX/DMX signal 200mt. TOT
DMX110V
220V L
N
IN
OUT +
-
Segnale DMX/DMX signal 200mt. TOT
slave DMX
slave DMX
schemi di collegamento/
wiring diagram
356
DMX
DMX
DMX
DMX
+-
+-
DMX
DMX
DMX
DMX
IN
IN
IN
IN
OUT
OUT
OUT
OUT
R S1
S1
S1
MASTER DMX
Segnale DMX/DMX signal 200mt. TOT
Tipologia di prodotti utilizzabili con WSLAVEDMX6X3/Kind of product to use with WSLAVEDMX6X3
max 6 spots 3x1W RGB (connessione in serie/series connection)
max 3 spots 3x3W RGB con/with WLAVEDMX6X3R (connessione in serie/series connection)
max 5 spots 4,6W Multichip RGB (connessione in serie/series connection)
max 1 spot 18x1W RGB
SPOTS
SPOTS 10mt MAX
15mt MAX
alimentatore/feeder
WALIM60W/24V
fino a 2 SLAVE DMX/up to 2 SLAVE DMX
(up to 12 spots LED 3x1W)
Slave DMX
WSLAVEDMX6X3
120x72x35
WMASTERDMX/INC
WCOLORWHEEL
WCOLORWHEELCT
+
+-
-
+-
+-
+
+-
-
Alimentazione/Feeding
Segnale RGB/RGB signal 200 mt. TOT
Cavo 6 poli/Cables 6 wires
fino a 32 SLAVE DMX (dopo 32 apparecchi utilizzare amplificatore di segnale cod. MAMPL/SIGNAL_DMX)
up to 32 SLAVE DMX (after 32 fittings use the signal amplifier cod. MAMPL/SIGNAL_DMX)
terminale/cap
120
R-R+G-G+B-B+
R-R+G-G+B-B+
ROSA/PINKGRIGIO/GRAYMARRONE/BROWNBIANCO/WHITEGIALLO/YELLOWVERDE/GREEN
ROSA/PINKGRIGIO/GRAYMARRONE/BROWNBIANCO/WHITEGIALLO/YELLOWVERDE/GREEN
+-
R 110V
220V
110V
220V
L
L
N
Nmaster DMX
+ -
slave DMX sistemi lineari 12/24V
12/24V slave DMX linear system
schemi di collegamento/
wiring diagram
357
WMASTERDMX/INC
WCOLORWHEEL
WCOLORWHEELCT
DMX
DMX
DMX
DMX
DMX
DMX
DMX
DMX
IN
IN
IN
IN
OUT
OUT
R S2
S2
S2
MASTER DMX
Segnale DMX/DMX signal 200mt. TOT
Tipologia di prodotti utilizzabili con WSLAVEDMX12/24V/Kind of product to use with WSLAVEDMX12/24V
max 6 mt. TOT (2x3 mt connessione in parallelo/parallel connection)
Striscia LED 24V Twin LED/ 24V Twin Led strip
Striscia LED 12V RGB - 12V LED strip RGB
Striscia LED 24V HP RGB - 24V RGB HP LED strip
max 10 mt. TOT (2x5 mt connessione in parallelo/parallel connection)
max 5 mt. TOT
SPOTS
SPOTS
10mt MAX
15mt MAX
alimentatore/feeder
WALIM60W/24V
fino a 2 SLAVE DMX/up to 2 SLAVE DMX
(up to 12 spots LED 3x1W)
Slave DMX
WSLAVEDMX12/24V
120x72x35
fino a 32 SLAVE DMX (dopo 32 apparecchi utilizzare amplificatore di segnale cod. MAMPL/SIGNAL_DMX)
up to 32 SLAVE DMX (after 32 fittings use the signal amplifier cod. MAMPL/SIGNAL_DMX)
terminale/cap
120
GIALLO/YELLOW
BIANCO/WHITE
VERDE/GREEN
MARRONE/BROWN
+-
R 110V
220V
110V
220V
L
L
N
Nmaster DMX
+
+
+
+
-
-
-
-
+
+
-
-
+
+
B-
B-
G-
G-
R-
R-
GIALLO/YELLOW
BIANCO/WHITE
VERDE/GREEN
MARRONE/BROWN
+ -
valigetta dimostrativa
demo case
La valigetta dimostrativa è uno strumento utile per pre-
sentare e valutare le applicazioni di numerosi apparecchi
della linea ILTI LEDS. Comoda da trasportare ovunque,
permette di valutare l’efficienza luminosa del contenu-
to in quanto tutti gli articoli inseriti al suo interno sono
funzionanti. La versione standard può essere rivista a
richiesta del Cliente per l’inserimento di modelli differen-
ti, ma dovrà essere rispettato l’ingombro previsto dal
rispettivo alloggiamento.
The demo-case is an useful tool to introduce and va-
lue the applications of several ILTI LEDS spots. Easy to
carry, it demonstrates the lighting efficiency of the spots
included. The standard version can be changed by the
customer on demand, but must be respected the inter-
nal space of every single spot.
Valigetta dimostrativa/
demo case 36x46x17 cm.
La foto presenta una delle possibili composizioni, ma è
puramente indicativa./
The picture shows one combination of spots, but it is
purely indicative.
prodotto/product
tabella di riepilogo prodotti/ product overview table
codice/code
codice a richiesta/
code on demand
materiale/material
acciaio inox/
stainless steel
misure/measures
36x46x17 cm
358
359
avvertenze
Indicazioni per una corretta installazione /
funzionamento apparecchi led ilti luce
L’installazione e la connessione elettrica devono
essere eseguite da personale qualificato.
Non collegare mai i faretti LED con l’alimentatore in
tensione.
Non aprire mai i faretti se non espressamente indi-
cato nelle istruzioni di montaggio/collegamento.
Verificare sempre il corretto alimentatore da utiliz-
zare con il prodotto LED e il numero minimo/massimo
di faretti supportati.
Verificare sempre che il grado di protezione
dell’apparecchio sia adeguato alla tipoligia di installa-
zione/utilizzo.
Se non espressamente indicato gli apparecchi non
sono nè calpestabili nè carrabili.
Gli apparecchi LED risentono delle variazioni di
temperatura. Per garantire una adeguata dissipazione
di calore accertarsi sempre che le zone/locali dove
verranno installati siano sufficientemente grandi e/o
areati e non coprire per nessuno motivo la parte metal-
lica che garantisce lo scambio di calore, non effettuare
verniciature e/o trattamenti che possano compromet-
tere questa funzionalità.
Indicazione particolare per faretti da IP65 a IP68.
Gli apparecchi LED con questo grado di protezio-
ne non devono essere aperti.
Le connessioni elettriche devono obbligatoria-
mente essere eseguite garantendo un grado di prote-
zione simile e/o superiore al faretto stesso (connettori
unipolari a perforazione di isolante e inglobamento a
gel, muffole a inglobamento a gel, muffole cilindriche
IP68 con pressacavi).
Nel caso di apparecchi incasso per esterni preve-
dere sempre uno strato drenante sotto la cassaforma.
Il corretto fissaggio a pavimento avviene solamente
con l’utilizzo delle cassaforme ILTI LUCE indicate.
Pulire periodicamente gli apparecchi per rimuove-
re gli accumuli di sporco e sostanze che si depositano
sulle superfici a contatto con aria/acqua.
Per utilizzo in acque termali,acque con sostanze
chimiche additive e particolari si consiglia di utilizza-
re apparecchi TF in materiale sintetico e/o rivolgersi
all’Ufficio Tecnico per consigli e modalità di utilizzo.
Manutenzione
Prima della pulizia, spegnere l’apparecchio e la-
sciarlo raffreddare.
E’ indispensabile eseguire la pulizia ad intervalli
regolari per rimuovere eventuali accumuli di polvere,
sporco o calcare. Gli intervalli ed i metodi richiesti a
tale riguardo dipendono dal luogo e dalla situazione
di montaggio nonché dalle condizioni ambientali.
Effettuare le pulizia utilizzando un panno morbido
inumidito in acqua tiepida.
Non usare prodotti per la pulizia a base acida per
pulire i faretti. Non utilizzare idropulitrici.
Nessuna parte degli apparecchi installati in ester-
no deve entrare in contatto con sostanze chimiche
aggressive (es. fertilizzanti, diserbanti, calce, acidi e
sostanze potenzialmente corrosive, etc…).
Garanzia
Il produttore non si assume nessuna responsa-
bilità per danni all’apparecchio, a cose o a persone,
causati dall’utilizzo di un alimentatore non idoneo o da
una connessione non eseguita a regola d’arte.
La garanzia non copre gli eventuali difetti e/o danni
causati da un utilizzo errato e non conforme alle istru-
zioni di installazione ed impiego ed alle indicazioni so-
pracitate.
Non si assumono responsabilità per difetti deri-
vanti da eventi atmosferici o calamità naturali (sovra-
tensioni, fulminazioni, etc...).
Avvertenze led
I Led utilizzati da ILTI LUCE seguono particolari
selezioni allo scopo di garantire la migliore uniformità
possibile sia in termini di resa cromatica sia in temini
di rendimento e flusso luminoso. Nonostante questi
accorgimenti possono presentarsi differenze con una
tolleranza di circa +/- 10%.
Le note tecniche e gli schemi di collegamento
sono da ritenersi puramente indicativi e non vincolanti.
Per qualsiasi dubbio o chiarimento contattare l’Ufficio
Tecnico ILTI LUCE.
Le dimensioni degli alimentatori indicate sul pre-
sente catalogo sono da ritenersi indicative e possono
subire variazioni senza alcun preavviso.
Dato il rapido sviluppo della tecnologia LED con
rese ed emissioni in costante aumento, ILTI LUCE si ri-
serva la facoltà di aggiornare e migliorare la tecnologia
LED all’interno dei suoi prodotti.
Di conseguenza i dati relativi alle letture fotometri-
che sono da considerarsi puramente indicativi in quan-
to soggetti a questi continui miglioramenti.
Avvertenze generali
Il presente catalogo sostituisce e annulla i prece-
denti.
I prodotti all’interno di questo catalogo sono sog-
getti al contributo di smaltimento come da direttiva
RAEE Dlgs n.151 vigente al 31 dicembre 2006 che
incorpora la direttiva RoHs relativa alla riduzione del-
le sostanze pericolose presenti nelle apparecchiature
elettriche ed elettroniche. Le sorgenti luminose a LED
e i materiali utilizzati da ILTI LUCE per la produzione
di apparecchi LED sono conformi alle direttive RoHS
riguardanti l’inquinamento ambientale e lo smaltimen-
to dei rifiuti pericolosi. Rispetto alle sorgenti luminose
tradizionali ad alto rendimento, contenenti gas, mercu-
rio ed altre sostanze tossiche di difficile smaltimento, il
LED non contiene alcuna sostanza considerata inqui-
nante.
I prodotti sono conformi EN60598 (2004/108/CE,
2006/95/CE e 93/68) e quindi costruiti, verificati e col-
laudati in conformità alle norme applicabili.
La ILTI LUCE si riserva il diritto di sopprimere in
qualsiasi momento e senza preavviso, eventuali pro-
dotti dalla collezione e, ferme restando le caratteristi-
che essenziali dei modelli descritti, di apportare va-
riazioni allo scopo di migliorare il prodotto per ragioni
costruttive e/o commerciali. Il programma contenuto
sul presente catalogo, potrà subire evoluzioni relative
allo sviluppo tecnologico della tecnologia LED e delle
sue applicazioni. Consigliamo quindi di contattare la
ILTI LUCE per qualunque risposta che non venga tro-
vata sulla presente documentazione.
ILTI LUCE non risponde di malfunzionamenti, du-
rata e resa luminosa dei propri prodotti quando alimen-
tati e gestiti con prodotti NON forniti da ILTI LUCE.
Se non espressamente indicato, gli alimentatori, gli
accessori ed altre parti non indicate come comprese
sono da ritenersi esclusi.
Le foto, le immagini, le dimensioni, le descrizioni ed
ogni altra possibile indicazione del presente catalogo,
hanno unicamente lo scopo di presentare il prodotto e
non sono vincolanti.
Per qualsiasi applicazione dalle dubbie implicazio-
ni, siete pregati di contattare l’Ufficio Tecnico ILTI LUCE
per verificarne la fattibilità.
Su richiesta sono disponibili le curve fotometriche
dei prodotti a catalogo.
Se non espressamente indicato, i faretti non sono
pedonabili.
Le dimensioni degli alimentatori etc … sono pura-
mente indicative.
Tutte le quote sono espresse in millimetri.
Tutti i prodotti, alimentatori ed accessori installati
devono essere accessibili ed ispezionabili per garantire
la corretta manutenzione.
360
cautions
Information with regards to the correct installation/
functioning of ilti luce led luminaires.
Installation and electrical connection must be per-
formed by a qualified installer.
Never switch on LED luminaires without the power
supply being connected.
Never open the luminaire, if not specifically indica-
ted on the mounting instructions.
Always check the specification of the power sup-
ply with regards to the minimum/maximum number of
luminaires which can be connected.
Always check if the IP rating of the luminaires is
suitable for the desider application.
Unless otherwise stated, the luminaires are neither
walk over nor drive-over.
LED fittings are affected by fluctuations in tem-
perature which can result in undesired colour shift or
loss of luminous flux. To ensure adequate dissipation
of heat always make sure that the area/room where
the luminaire will be installed are adequately ventilated.
Never cover the metal dissipater of a luminair as this
restricts the flow of air and will result in a shorter than
specified lifetime.
Information with regards to ip65 and ip68 luminaires
LED fittings rated IP65,IP66,IP67 or IP68 should
never be opened.
In case of recessed luminaires for exterior use,
always prepare a drainage layer under the recessed
box. The correct installation in the floor is only with the
use of the listed ILTI LUCE recessed boxes.
Periodically clean the fittings to remove dirt and
substances deposited on surfaces in contact with air
and water.
For use in thermal waters, in waters with chemical
additives, we always suggest to use TF fixtures in syn-
thetic material and/or refer to the technical office staff
for advise concerning the use of luminaires in such ap-
plications.
Maintainence
Before cleaning the luminar, switch off the power
supply and let it cool down.
It is essential to clean the luminair periodi-
cally at regular intervals in order to remove the
dust,dirt,limestone or other contaminations. Not main-
taining the luminaires may result in malfunctioning.
Clean the luminaires using a soft cloth damped in luke-
warm water.
Do not use cleaning products which contain acidic
substances. Do not use cleaner machines.
Luminaires must not be used in corrosive envi-
ronments, exposure to corrosive substances must be
avoided at all times. In case of doubts concerning che-
mical resistancy of our luminaires please contact our
technical department.
Warranty
The producer does not accept any liability for da-
mage of the luminaires, property or persons, caused
by the use of a wrong driver or by faulty electrical con-
nection.
The warranty does not cover defects and/or da-
mages caused by wrong use in cases where the instal-
lation instructions have not been followed.
The producer does not accept any liability for de-
fects caused by natural disaster.
Led warnings
The LEDs used by ILTI LUCE are selected in order
to provide the best uniformity in terms of chromatic ef-
ficiency and light efficiency. Despite these precautions,
there may be differences within a tolerance approxima-
tely +/- 10%.
Technical notes and wiring diagrams are to be consi-
dered purely indicative and are not binding. For informa-
tion please contact the Technical Office of ILTI LUCE.
Dimensions of the power supplies stated in the
present catalogue are purely indicative and they are
subject to change without notice.
Due to quick technological improvements in LED
technology related to lm/w ratios ILTI LUCE reserves
the rights to alter the specifications of our products.
As a consequence, the photometric data are to be
considered purely indicative and subject to continuous
improvements.
General warnings
The present catalogue replaces the previous ver-
sion, the previous version is no longer considered valid.
Products shown in this catalogue are conform the
RAEE (WEEE) Directive Legislative Decree n. 151 ver-
sion 31 December 2006, including RoHs directive.
Products are conform EN60598(2004/108/CE,
2006/96/CE and version 93/68), built and tested in
accordance with the latest regulations.
ILTI LUCE reserves the right to eliminate products
from the program as offered in this catalogue without
prior consent. The program in this catalogues can be
altered without prior consent due to the technical de-
velopment of the LEDs.
If not specifically specified ,power supplies, acces-
sories and other parts not listed as being included are
believed to be excluded.
ILTI LUCE cannot be held responsible for malfun-
ctioning, short lifespan and decrease in light output if
the products are not driven and connected to a speci-
fied LED driver.
Photography, images and product descriptions in
this catalogue are intended to present the product and
cannot considered binding.
Photometric files are available on request.
I not specifically indicated, the Luminaires are not
suited for pedestrian areas.
The dimensions of the LED drivers are indicative
All dimensions are specified in millimeters.
All products, power supplies and accessories in-
stalled must be accessible and available for inspection
to ensure proper maintenance.
Lungo Dora P. Colletta 113/910153 Torino (Italia)tel + 39 011 248.2291 - .9412 - .7286fax + 39 011 853 855p.iva 05966420019
Ilti Luce Srl a Philips Company