Illumination Modules for 3D SensingCoInnovateCS, May 2019, Minneapolis,MN

Jim ForesiVice President of Product DevelopmentTriLumina Corpjforesi@trilumina.com

Business Model: Illumination Modules for LiDAR and 3D Sensing Systems

Copyright 2019 | 2

Customers: 3D Sensing,LiDAR Systems

OEMs

Multiple 6” Fab PartnersContract Assembly

Design of EPI and VCSEL Array and Illumination Module

TriLumina | ISO 9001 certified

• Innovation: Combine Lasers, steering and optics in one chip• 940nm, Back-side-emitting flip-chip VCSEL arrays enable high

performance, low cost, reliable, tiny Illumination Modules• 65 patents granted and pending; Own all IP

• Addressing the inflection point for 3D Sensing VCSELs + MicroOptics Market• $6B (Auto+ consumer)

• Business Model: Sell VCSEL array Illuminator modules

• Shipped A and B Samples for first revenue 2018

• Ramping production and qualification in 2019

• Focus on design/innovation

• High Volume, robust supply chain: Multiple 6” epitaxy, wafer fab and test and assembly partners

Illumination Modules

Value Chain Positioning Enables Low Risk, High Value

Illumination for Automotive and Consumer 3DS

3

8 W QCW Module (In-Cabin)Short Range (<15 m)

300 W Illuminator Module for Solid State Front Lidar (Flash) Used in > 250m Long Range solid state LiDAR

100 W QCW Illuminator Module, Demonstrated >30 m Range in Multi-Mode Camera (Vision/IR/LiDAR)

8-Line Segmented Flash Integrated into 3D Flash LiDAR Reference Design – 50-100 m Range

600 W Illuminator Module for Solid State Front Lidar (Flash)> 250 m Range LR LiDAR

Same VCSEL Area as 300W

VCSEL Array for Mobile ToF

TriLumina | ISO 9001 certified Copyright 2019 | 3

4

Contact Information801 University Blvd SE, Suite 101Albuquerque, NM 87106www.TriLumina.com THANK YOU!