- i -

Contents

Session 1: TOWARDS A SUSTAINABLE FUTURE

Plenary Session 1 - Industry Keynote Speaker: Jean Fayolle - Corporate Senior Vice President, Adhesive Technologies, Henkel ······················································· 3

Introduced by: Ramon Bacardit, Henkel

》 Session 1-Track 1: A&S Industry ChallengesModerator: Ansgar Van Halteren, Industrieverband Klebstoffe e.V. (IVK) / German Adhesives

Association

A History of Sustainable Development in the Adhesive Industry ···················· 17

Dr. Hermann Onusseit, Henkel, Germany

Sustainability – turning waste into reusable resources ······································· 54

Herwart Wilms, Managing Director, REMONDIS Assets & Services GmbH & Co. KG, Germany

Packaging Sustainability ································································································ 63

Michel Fontaine, Chairman, Conseil National de L´Emballage, France

》 Session 1-Track 2: Technologies for SustainabilityModerator : Andy Johnston, Ashland Performance Materials Inc.

Polyurethane adhesives and sealants and sustainable development ··············· 79

Shpresa Kotaji, Environmental Affairs Manager, Huntsman Polyurethanes, Belgium

Sustainability with Polyurethane Adhesives ····························································· 89

Heinz-Werner Lucas, Business Unit Coatings, Adhesives and Specialties, Bayer MaterialScience

AG, Germany

Using Waste CO2 to Create Novel Renewable Polyols for Adhesive Applications ··················································································································· 107

Jason M. Anderson, Director, Business Development, Novomer Inc., USA

- ii -

Butyl Ionomers: A New Generation of Functionalized Butyl Rubber Polymers with Improved Adhesive Properties ········································································ 117

Dr. Dana K. Adkinson, Senior Research Scientist, Global Research and Development Center,

Lanxess Inc, Canada

》 Session 1-Track 3: The Green Performance of Adhesives & SealantsModerator: Will R. Barclay, Geocel Ltd.

Factors affecting durability of sealants ·································································· 129

Patrick Vandereecken, Technical Manager, Construction Dep., Dow Corning Europe S.A.,

Belgium

An experimental study on structural properties of 4 sided structural sealant glazing system that was applied to glass facade for over 20 years ············ 137

Hisashi Ishii Ph.D., LIXIL Corp. Research Institute, Japan

The External Thermal Insulation Composite System – The Key Role Of The Adhesive ························································································································· 146

Marco Cerra, R&D Director, Vinavil S.p.A., Italy

Innovative Wooden Sleeper Repair Material – Innovative method for the repair of wooden sleepers using new sealants ··················································· 164

Hiromu Nagae, SHARP CHEMICAL IND. CO. LTD., Hankyu Corporation, Japan

- iii -

Session 2: THE TECHNOLOGY REVOLUTION

Plenary Session 2 - Industry Keynote Speaker: Bernard Pinatel, Chairman andCEO, BOSTIK ·················································································································· 175

Introduced by: Phil Derby, Vice President – Western Europe, BOSTIK – Vice President of Feica,

Member of the Feica Executive Board

》 Session 2-Track 1: State of the Art Silane Terminated Systems Moderator: Marco Cerra, R&D Director, Vinavil S.p.A.

Future trends in moisture curable silane polymer technology ······················· 189

Luc Peeters, R&D Manager, High Performance Polymer Division, Kaneka Belgium N.V., Belgium

Alpha-Hybrids for strong bonding applications ·················································· 197

Dr. Lars Zander, Wacker Chemie AG, Germany

Silylated Polyurethane Prepolymers For Elastic Adhesives ······························· 208

Thomas Lim, Principal Scientist, Adhesives and Sealants Momentive Performance Materials, USA

A new ground-breaking silane-modified polymer technology for innovative sealant and adhesive formulators ··········································································· 220

Melanie Roessing, Marketing Manager, TEGOPAC Evonik Industries AG, Germany

Development of Two-Component Telechelic Polyacrylate Sealant ················· 234

Yasushi Hatta, CEMEDINE CO.,LTD, Japan

》 Session 2-Track 2: The Edge of Hotmelt TechnologyModerator: Trevor Clarke, Pafra Adhesives Ltd.

Innovative Hot Melt Adhesive Solutions for “Hard-to-Bond” Substrates ····· 245

Selim Yalvac, Senior R&D Manager, Dow Elastomers, The Dow Chemical Company, USA

Novel High Melting Low Molecular Weight Maleated Polyethylenes for High Performance APAO and mEO Hot Melt Adhesives Systems ··························· 253

Kurt Severyns, Manager, Field Marketing, EMEA Honeywell International, Belgium

Understanding Oxidative and Thermal Degradation of Hot Melt Adhesives ·· 263

Dr. Jerrold Miller, Science and Technology Team Leader, Rosin Esters, Arizona Chemical, USA

- iv -

Low Melt Viscosity Hot Melt Adhesives Based on Radial Styrenic Block Copolymers ···················································································································· 271

Brian Witt, R&D Technical Manager, Dexco Polymers LP, USA

Continued Developments in Caustic Removable Hot Melt PSA Additives TBC·········································································································································· 280

Marie-Laure Daignieres, Development Manager-Adhesives & Sealants, France, CRAY VALLEY

Hydrocarbon Specialty Chemicals, France

》 Session 2-Track 3: New Building Blocks for Reactive SystemsModerator: Eva Griessbach, Dow Corning Europe S.A.

A Study of Fatigue Properties of Two-Component Acrylic Structural Adhesive·········································································································································· 291

Meina Du, R&D Project Manager, Beijing Tonsan Adhesive Co., Ltd, China

New high strength / high peel performance adhesive for composite bonding·········································································································································· 308

Philippe Jeantet, Technical Support Adhesives, HUNTSMAN Advanced Materials (Switzerland)

GmbH, Switzerland

Modern PUR Sealants & Adhesives: Superior Products Thanks to Novel Curing Technology ······································································································· 320

Dr. Steffen Maier, Department Manager R&D, Sika Technology AG Switzerland

UV cure in place foam gaskets ··············································································· 330

Kazuyoshi Sekita, R&D, Dept. Adhesives DIV, Nitta Gelatin Inc., Japan

New high performance tin free silicone adhesives and sealants ··················· 338

Dominique Canpont, R&D, Textile Coating and Elastomers Lab Manager, Bluestar Silicones,

France

》 Session 2-Track 4: Advanced Technologies for Improved PSA PropertiesModerator: Bruno Charriere, Bostik

Water-Soluble Pressure-Sensitive Adhesives based on Acrylics for Recyclable Products used in Paper and Metal Industry ························································ 349

Dr. Roland Milker, CEO, POLY-CHEM AG, Germany

- v -

Flexible Block Polyacrylics and Polyolefins in PSA ············································· 363

Akira Matsumoto, Product Manager, Kuraray Europe GmbH, Germany

Pressure-Sensitive-Adhesive In Future Frontier Technology ····························· 371

Prof. Hyun-Joong Kim, Seoul National University, Korea

Novel Acrylic Emulsion Pressure Sensitive Adhesive ·········································· 401

Jong Guo, Sr. Research Chemist, Momentive Specialty Chemicals, USA

Innovative solutions to overcome the limited availability and price increases of some traditional polymers ··················································································· 408

Dr. Walter Ramirez, Global Technology Director, Dynasol, Mexico

- vi -

Session 3: Secure Raw Material Sourcing

Plenary Session 3 - Industry Keynote Speaker: Dr. Urs Mader, Global R+D Manager, Sika ··············································································································· 427

Introduced by: Eric Dehasque, Area Manager Benelux/Nordic, SIKA – Member of the FEICA

Executive Board

》 Session 3-Track 1: Strategic OutlookModerator: Glenn Frommer, ADCO Products Inc.

New HSBC Technology for Modification of Amorphous Polyolefins – Cost Effective and More Sustainable Alternatives for Hygiene Hot Melt Adhesives·········································································································································· 439

Donn Dubois, Kraton Polymers Belgium sprl, Belgium

Strategic view on rosin supply – demand cycles and the impact on speculation ····················································································································· 447

Alessandro Visconti, Division Manager Pine Chemicals, Petrofer AG, Switzerland

Pressure-Sensitive Adhesive sourcing faces challenging changes – The perspective of a polymers specialist. ························································· 457

Dr. Soren Butz, Technical Service & Marketing Manager Functional Polymers, Synthomer Group,

Germany

》 Session 3-Track 2: Ways to bio-based Raw MaterialsModerator: Gerry Heebner, Arizona Chemicals

Bio-derived adhesives from renewable feedstocks ············································· 469

Prof. James Clark, Director, University of York, Green Chemistry Centre of Excellence, UK

New bio-based and environmental solutions for high-performance adhesives·········································································································································· 483

Dr. Angela Smits, Applications specialist, Croda Coatings & Polymers, Netherlands

Keep an eye on green solutions: Bio-based polyester polyols for reactive PUR Hot Melts ······················································································································· 493

Gabriele Brenner, Director Applied Technology Reactive Hot Melts, Evonik Industries AG,

Germany

- vii -

Dry blood powder based adhesive as a renewable and free formaldehyde alternative for wood industry. ·················································································· 502

Daniela Garcia, INTI-Caucho, Argentina

》 Session 3-Track 3: Innovative Alternatives for Raw Materials under PressureModerator: Heinz-Werner Lucas, Bayer MS

High Performance Sustainable Resins and Applications ··································· 511

Dr. Yuung-Ching Sheen, Manager, Material Chemical Laboratories (MCL), Industrial Technology

Research Institute (ITRI), Hsinchu, Taiwan

New Production Channels for Plant based Chemicals ······································ 522

Franck Thumerel, Business Development & Marketing Manager, ROQUETTE Biohub Program

Management, Roquette, France

New Dibenzoate Plasticizer Blends for Waterborne Applications ··················· 533

William D. Arendt, Research Fellow, Emerald Kalama Chemical, LLC, USA

》 Session 3-Track 4 : Innovation in Design and PerformanceModerator: Thomas Drustrup, Danish Coatings and Adhesives Association (DLF)

A Methodology of Adhesive Design Based on Structure-Rheology-Property- Performance Inter-relationship of Adhesive Material ········································· 553

Dr. Hsiao Ken Chuang, RD-VGM, Texyear Industries Inc., Taiwan

A new generation of polyamide rheology modifiers for cold manufacturing process of sealants ······································································································ 568

Germain Fauquet, Technical Service Europe, Arkema Group, France

New Propylene-based Elastomers for Hot Melt Adhesive (HMA) Applications·········································································································································· 576

Joseph M. DeLucia, Sales Representative – Adhesion Industry Business Unit, ExxonMobil

Chemical Company, USA

New Polymer Dispersion with Improved Adhesion on Difficult Surfaces ···· 584

Dr. Gerhard Kogler, Senior Manager Technical Service Adhesives Europe, Wacker Chemie AG,

Germany

- viii -

Session 4: Creating Va lue - Entrepreneurship ... Design ... Innovation

Plenary Session 4 - Industry Keynote Speaker: Jim Owens, Director, President and Chief Executive Officer, H.B. Fuller ································································· 599

Moderator : Mr. Steven Kenny, Senior Vice President, EIMEA, H.B. Fuller – Member of the

Feica Executive Board

》 Session 4-Track 1: Innovative Solutions for Adhesives and SealantsModerator: Selim Yalvac, DOW

Polyurethane – a Survival Chance for Medium Sized Adhesive Manufacturers·········································································································································· 627

Klaus Becker-Weimann, Managing Director & Partner, Klebchemie M.G. Becker GmbH & Co.

KG, Germany

Towards Innovative Adhesives for Safe Food Packaging-Strategies, Projects & Materials ························································································································· 635

Dr. Hermann Onussei, Industrieverband Klebstoffe e.V. (IVK) - German Adhesives Association -

Technical Committee for Paper and Packaging Adhesives (TKPV), Germany

Migration studies of adhesives based on Vinyl Acetate Ethylene (VAE) copolymers intended for the food packaging industry ···································· 668

Dr. Meike Roth, Laboratory Manager Application Technology, Celanese Emulsions GmbH,

Germany

High strength hybrid adhesives: Today’s fillers for tomorrow’s technology ·· 681

Dennis Werner, Omya AG, Switzerland

Innovative Waterborne Polyurethane Dispersions for Modern Adhesive Applications ··················································································································· 690

Dr. Matthias Wintermantel, Bayer MaterialScience AG, Germany

Improved Bonding and Formulation Flexibility in Hot Melt Adhesives Based on Ethylene-Octene Elastomers ················································································ 704

Allan Mc Lennaghan, Lead Engineer Dow Elastomers, The Dow Chemical Company, USA

- ix -

》 Session 4-Track 2: Challenges and Opportunities to ManagementModerator: Cees Pille, Dutch Adhesives & Sealants Association (VLK)

What is in the crystal ball and what are the implications on our industries?·········································································································································· 713

Daniel S. Murad, President and CEO, The ChemQuest Group Inc., USA

Adhesive Bonding – but properly! An online-guideline for the correct use of adhesives ························································································································ 721

Andreas Groß, Head of Department ”Workforce Training and Technology Transfer“, Fraunhofer

IFAM, Germany

VOC – Challenges and Opportunities : LEED, EMICODE, VOC regulations · 730

Reinhard Oppl, Director, Eurofins Product Testing A/S, Denmark

Benchmarks & Critical Success Factors for Product and Technology Introduction in Adhesives ·························································································· 739

Bernard Hasson, Chief Operating Officer SpecialChem, France

Building reactive adhesive platforms globally designed around clear value propositions, from flexible packaging to panel assembly applications ········ 750

Marga Acevedo, Technical Manager – Global Reactives R&D, H.B. Fuller Company, USA

Intelligent use of scarce resources – the key to a sustainable future ········· 762

Anna Holmberg, Sustainability Policy Director – Europe, Arizona Chemical, USA

》 Session 4-Track 3: Progressive Problem SolvingModerator: Hermann Onusseit, Industrieverband Klebstoffe e.V. (IVK) German Adhesives

Association

The Effect of Bonding & De-bonding Conditions on Peel Adhesion ·········· 775

Allen Tsaur, Material Engineer at Adhesive Source, Consultant, Adhesive Source, Taiwan

Mixer Development with Computational Fluid Dynamics (CFD) ····················· 783

Dr. Sasan Habibi-Naini, Head of Strategic Innovation, Sulzer Mixpac Ltd., Switzerland

Established and new Solutions for the Pelletizing of Hot Melt Adhesives ·· 795

Michael Eloo, Managing Director, Gala Kunststoff- und Kautschukmaschinen GmbH, Germany

- x -

Multifunctional Adhesive Coating and Corrosion Protection For Magnet Applications ··················································································································· 808

Dr. Lothar Zapf, Permanent Magnets R&D, Chemical Technology, Vacuumschmelze GmbH &

Co. KG, Germany

Numerical and Experimental Investigation of Single Lap Shear Joint Design Elements on Joint Fatigue Strength ······································································· 817

Robert Jennings, Research Specialist 3M, USA

》 Session 4-Track 4: Adhesives as Enabler for Lightweight DesignModerator: Jürgen Wichelhaus, Henkel

Sustainability as a priority in the European transport policy ·························· 829

Saïd El Khadraoui, Member of the European Parliament (Member of the Committee on

Transport and Tourism, Belgium

Present and Future of the Chinese Auto Industry-Opportunities and Risks · 835

Dr. Bernd Leissner, President, BMLEI LLC. International Automotive Consulting, USA

Structural Bonding as Key Technology for Automotive Lightweight Parts in Multi-Material-Design ·································································································· 848

Benjamin Kraemer, Technical Marketing Manager Structural Bonding, Sika Automotive GmbH,

Germany

Properties of adhesives and adhesive materials used in aviation industry ··· 860

Irina A. Sharova, Federal State Unitary Enterprise All-Russian Scientific Research Institute of

Aviation Materials (VIAM), Russian Federation

Adhesive and Sealant Development in Aerospace: An Overview ··················· 864

Leslie J. Clark, Engineer - Surface Technology - Materials and Processes - ESWBU, Airbus

Operations Ltd, UK