IFM Vibration Monitor System
-
Upload
minh-vien-ngoc -
Category
Engineering
-
view
95 -
download
4
Transcript of IFM Vibration Monitor System
UNICO VINA JSC
~ 1 ~ Mr. Vien Ngoc Minh
HP: +84 983 886 943 || +84 906 701 599
Email: [email protected] || [email protected]
Skype: minh.vienngoc
VIBRATION MONITORING SYSTEM
INDEX VIBRATION MONITORING SYSTEM ....................................................................................................... 1
1. Description .............................................................................................................................................. 2
1.1. Why we need the Maintenance? ..................................................................................................... 2
1.2. Maintenance Approaches ................................................................................................................ 2
2. Proactive Maintenance’s Technologies .................................................................................................. 5
3. Vibration Analysis .................................................................................................................................. 5
3.1. General Knowledge ........................................................................................................................ 5
3.2. Four Popular Problems ................................................................................................................... 6
3.3. IFM Vibration Monitoring System – Efector Octavis .................................................................... 7
System Specification ............................................................................................................................... 7
Customer benefits ................................................................................................................................... 9
System Components ................................................................................................................................ 9
UNICO VINA JSC
~ 2 ~ Mr. Vien Ngoc Minh
HP: +84 983 886 943 || +84 906 701 599
Email: [email protected] || [email protected]
Skype: minh.vienngoc
1. Description
In the paper, the writer just want to provide very first basic knowledge about
Maintenance Strategies and one kind of Vibration Monitoring application from IFM for
every people, it definitely is not academic one. For further reference, please contact to:
Mr. Vien Ngoc Minh
HP: +84 983 886 943 or +84 906 701 599
Email: [email protected] || [email protected]
Skype: minh.vienngoc
1.1. Why we need the Maintenance?
Minimize errors
o Balancing the machine components.
o Improving maintenance operation.
o Cleaning oil, lubricating mechanical parts.
Prevent effects to production operation
o Avoiding unwanted reparation.
o Stopping chain defects to other parts.
o Saving maintenance cost.
1.2. Maintenance Approaches
Approach Advantages Disadvantages
Breakdown Maintenance
- Only repair when machine broken
down.
- Popular in undeveloped areas.
- Maybe short-term
reducing cost.
- High cost for
replacing broken
parts (Normally
above ten-times in
compare to
maintenance cost).
- High downtime.
- Need large spare
parts quantity.
- Generate a lot of
safety problems
UNICO VINA JSC
~ 3 ~ Mr. Vien Ngoc Minh
HP: +84 983 886 943 || +84 906 701 599
Email: [email protected] || [email protected]
Skype: minh.vienngoc
- Customer must purchase for
reparation when machine broken
down.
during operation
and reparation.
Preventive Maintenance
- Maintain, repair before machine
broken down.
- Schedule maintenance plan based on
experiences.
- The most popular approach at the
current, this approach will be good
with the assumption that the machines
and parts will be broken as descripted
in the original datasheet.
- Need to answer two questions below:
(1) WHEN is the machine broken
down?
(2) WHY the machine will be
broken?
- Depending on
experiences, it takes
years to have a good
maintenance plans.
There’re several
problems at the
beginning of Plan
Process:
Over-
maintained.
Over-
lubricated.
Over-stock
Spare parts.
Predictive Maintenance
- Not unpredicted
downtime.
- Not unpredicted
errors.
- Not associated
damages.
- Depending on
individual
experiences.
UNICO VINA JSC
~ 4 ~ Mr. Vien Ngoc Minh
HP: +84 983 886 943 || +84 906 701 599
Email: [email protected] || [email protected]
Skype: minh.vienngoc
- Maintain, repair based on experienced
about machine condition.
- Predict when machine broken down.
- Maintain, repair at the most suitable
time.
- Only maintain, repair when machine
“require”.
- Assess risk intelligently.
- Monitor machine status online.
- Predict error modes.
- Every maintenance
plans will be pre-
scheduled.
Proactive Maintenance
- “Repair one time, repair right place”
or “Precious Maintenance”.
- Inherited and developed from
Predictive Maintenance.
- Predict error modes by using
intelligent analysis tools.
- Change the machine design,
procurement, and maintenance to
reduce errors and increase
reliabilities.
- Precise balance…
- Proactive and
precise maintenance.
- Not unpredicted
errors.
- Not need to stop
machine to inspect
operating condition.
- Minimize
maintenance cost.
UNICO VINA JSC
~ 5 ~ Mr. Vien Ngoc Minh
HP: +84 983 886 943 || +84 906 701 599
Email: [email protected] || [email protected]
Skype: minh.vienngoc
2. Proactive Maintenance’s Technologies
- Existent technology:
+ Vibration Analysis
+ Oil Analysis
+ Wear Particle Analysis
+ Thermography
+ Ultrasound
+ Steam trap
Proactive Maintenance Technology
3. Vibration Analysis
3.1. General Knowledge
- Vibration signal changed during operation
condition changed.
- Causes of Vibration
+ When the sharp rotating, there are two forces appeared: Friction Force and
Rotation Force.
+ These forces will be transmitted from Bearing to Machine Housing.
UNICO VINA JSC
~ 6 ~ Mr. Vien Ngoc Minh
HP: +84 983 886 943 || +84 906 701 599
Email: [email protected] || [email protected]
Skype: minh.vienngoc
3.2. Four Popular Problems
There are four popular errors that Vibration
Technology can detect:
Imbalance
Misalignment
Looseness
Faulty Bearing
Errors Causes Images
Imbalance
- The heavy points on
the shaft make the
machine imbalance
during rotating
process, the vibrated
shaft causes bearing
broken down.
Misalignment - Misalignment causes
machine vibrated
strongly and damage
bearing.
Looseness - Machine
components are not
connected tightly
during installation
- During operation,
components
UNICO VINA JSC
~ 7 ~ Mr. Vien Ngoc Minh
HP: +84 983 886 943 || +84 906 701 599
Email: [email protected] || [email protected]
Skype: minh.vienngoc
3.3. IFM Vibration Monitoring System – Efector Octavis
System Specification
Alarm Signals of Efecto Octavis System
- The system monitor and analyze online machine operating conditions, which divide
into three warning levels:
+ Normal – OK: (Green LED) Machine in Normal Status
+ Pre-alarm: (Yellow LED) Machine begins to have problems; however, it still
can be operated.
+ Main alarm: (Red LED) Machine need to be maintained.
Bearing Fault
(1) Vibration
Amplitude
(2) Vibration
Frequency
- Production errors.
- Operating in bad-
lubricated
conditions.
- Small objects get
into bearing.
UNICO VINA JSC
~ 8 ~ Mr. Vien Ngoc Minh
HP: +84 983 886 943 || +84 906 701 599
Email: [email protected] || [email protected]
Skype: minh.vienngoc
Especially, Efecto Octavis system still has ability to realize the current warning level
of the machine based on intelligent analysis ability.
- Data storage ability:
+ Manage parallel up to 7 VE modules, or 24 VSE modules.
+ Real-time data, stored on VSE module up to at least 03 weeks depending on
logging time frame.
+ Direct warning to PLC.
+ System monitoring via PC, can be accessed via Internet.
UNICO VINA JSC
~ 9 ~ Mr. Vien Ngoc Minh
HP: +84 983 886 943 || +84 906 701 599
Email: [email protected] || [email protected]
Skype: minh.vienngoc
Customer benefits
High Quality brand name with cost effectiveness.
IFM is the top brand in supplying online Vibration Monitoring system.
Quality Service Certificate for products and services.
One of the most popular brand with the field equipment.
Free parameterized software.
Local support.
Global training, consulting system.
System Components
Vibration Sensor: Can diagnose three operating conditions simultaneously.
o Imbalance condition.
o Bearing condition.
o Looseness condition.
Diagnostic Electronic System: Data Acquisition Module, which can connect to
computer via Ethernet, has ability to store historical data for several months. Each
motor, gearbox need 01 Data Acquisition Module and from 04 Sensors to supervise
all the machine operating conditions.
Computer Software: Computer with installed Software to parameterize and
supervise all the machine operating conditions.