IED 2015 FINAL REVIEW.notebook May 13, 2015 IED FINAL REVIEW PART 2 · 2015-05-13 · IED 2015...
Transcript of IED 2015 FINAL REVIEW.notebook May 13, 2015 IED FINAL REVIEW PART 2 · 2015-05-13 · IED 2015...
IED 2015 FINAL REVIEW.notebook
1
May 13, 2015
IED FINAL REVIEW PART 2
2-dimensional shapes must have a size and location
Drawing Annotation:
Part Tolerance:
“reinventing the wheel,” then you probably know the answer.
- _The creation of a new product/idea that does not already exist_________________________
Patents & Copyrights- NAME AND DATE should be on all drawings to protect your work
B) Brainstorming- The process used to find a solution to a problem by collecting ideas C) Design Constraints
A) - action by two or more people, in which each
B) Group NormsC) - is a branch of which seeks to address questions
Gannt Chart is a type of bar chart that illustrates a project
schedule.
IED 2015 FINAL REVIEW.notebook
2
May 13, 2015
5. Technical Report Engineers Notebook
6. The difference between a Model (non-functional 3D representation)
7. Elements of Design
-curved, horizontal, vertical, diagonal
-The shape, outline, or configuration
Color- Provides definition, interest, variety, change
(tonal shading)- By using various combinations of light &
shadow you can create a sense of depth
-
IED 2015 FINAL REVIEW.notebook
3
May 13, 2015
11. Dial Caliper
12. Reverse Engineering-
Functional Analysis- Observing how the object/process functions
13. Parametric Equations
Working Drawing- **dimensions included Assembly Drawing- shows how parts go together
Precision:________________________________________________________
Accuracy:________________________________________________________
Tolerance:________________________________________________________the amount of allowable variation
recording dimensions to the correct rule or standard
the number of digits (significant figures)
Pictorials
IED 2015 FINAL REVIEW.notebook
4
May 13, 2015
2,2,4,5,6,10,13
Parallel, horizontal, perpendicular, etc
Mate, Flush, Insert, Angle
dimensioning
18. SystemsHydraulic Systems
Standard Deviation
SUM__________
IED 2015 FINAL REVIEW.notebook
9
May 13, 2015
d= 4
Calculate the area of the circle:
Calculate the volume of the rectangle:
Calculate the mass if the density is .05: Calculate the mass if the density is .09:
What would the total cost be to ship 10 objects What would the total cost be to ship 15 objects
IED 2015 FINAL REVIEW.notebook
14
May 13, 2015
10.Assembly ConstraintsMATE
FLUSH
ANGLE
TANGENT
INSERT