IEC 60320 WIRING DEVICES - INTERNATIONAL...

127

I C I

TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985

© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com

INTERNATIONAL

IEC 60320WIRING DEVICES

128

IEC 60320 C-13 CONNECTORS2 Pole 3 Wire Grounding15 Ampere 250 Volt / 10 Ampere 250 Volt “CE” MARK

70°C

IEC 60320 C-13

57055-NS Connector body.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81153 available (Use withNo. 57011 bolt-in type inlet only). Use clamp No. 81151 withNo. 57311 snap-in type inlet only.

Cat. No. Approvals Description

3, 20, 22

57055-NS

All dimensions are in millimeters (1 mm = 0.039")

57055-NSL 3, 20, 22

57055-M 3, 20

57070 3, 4, 9,13, 17,

18, 20, 22

Connector body.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81153 available (Use withNo. 57011 bolt-in type inlet only). Use clamp No. 81151 withNo. 57311 snap-in type inlet only.

Connector body. Heavy duty.Black Nylon, 65°C.Dust/moisture seal provided at cord grip.Cord grip range = 9.0-16.5 mm (0.360-0.655”)Clamp type terminals accept 4.0 mm (12 AWG) conductorsRating: 15 Amp-125 Volt, 10 Amp-250 Volt

Connector body. Down angle design.Black thermoplastic, UL 94 V0.Screw terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15Amp-250Volt (UL/CSA),10Amp-250Volt(European)“CE” MARK

NOTE: See connector body No. 57070-A, page 129, forsimilar connector with compression type terminals.

Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI

I C I

TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985


57055-NSL

57055-M

57070

21

28.7

61.587

8761.5

28.7

21

5272 36

DIA

27 37

49

81

129


70°C

IEC 60320 C-13

57065-NSConnector body. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK

Cat. No. ApprovalsDescription

3, 20, 22


57065-NSL 3, 20, 22

57070-A 2, 4, 7,12, 13,14, 17,18, 22

Connector body. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK

Connector body. Down angle.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 9 mm (0.354”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating: 10 Amp-250 Volt (VDE)“CE” MARK

I C I




57065-NS

57065-NSL

57070-A

21

51

7044.5

7044.5

51

21

40

47

72

28

130


120°C

IEC 60320 C-15

57050 Connector body.Black thermoplastic, UL 94 V0.Screw terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 9 mm (0.354”)Max conductor size accepted by terminals = 1.5 mm(16 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81156 available (Use withNo. 57011 bolt-in type inlet only).


3, 14, 17,18, 20, 22


57050-NS 1, 3, 20,22

57050-NSL 1, 3, 20,22

57050-A 4, 13, 14,17, 22

Connector body.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81153 available (Use withNo. 57011 bolt-in type inlet only). Use clamp No. 81151 withNo. 57311 snap-in type inlet only.

Connector body.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81153 available (Use withNo. 57011 bolt-in type inlet only). Use clamp No. 81151 withNo. 57311 snap-in type inlet only.

Connector body.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81156 available (Use withNo. 57011 bolt-in type inlet only).

57050-M 3, 20 Connector body. Heavy duty.Black Nylon, 65°C.Dust/moisture seal provided at cord grip.Cord grip range = 9.0-16.5 mm (0.360-0.655”)Clamp type terminals accept 4.0 mm (12 AWG) conductorsRating: 15 Amp-125 Volt, 10 Amp-250 Volt

I C I




57050

57050-NS

57050-NSL

57050-A

57050-M

21

31

8858

8761.5

28.7

21

8761.5

28.7

21

5884

20

30

7252

36DIA

131


57060-NSConnector body. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK


3, 20, 22


57060-NSL 3, 20, 22

57060-A 7, 12, 13,17, 18, 22

Connector body. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK

Connector body. Right angle.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 9 mm (0.354”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating: 10 Amp-250 Volt (VDE)“CE” MARK

120°C

IEC 60320 C-15

57075 3, 18, 20,22

Connector body. Left angle.Black thermoplastic.Screw terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 7 mm (0.276”)Max conductor size accepted by terminals = 1.5 mm(16 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK

LEFT ANGLE CONNECTOR BODY

57085 2, 4, 12,13, 14,

17, 18, 22

Connector body. Down angle.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 9 mm (0.354”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating: 10 Amp-250 Volt (VDE)“CE” MARK

I C I




57060-NS

57085

57060-NSL

57060-A

57075

7044.5

5133

21

5133

7044.5

21

19

2652

54

19.54028

47

72

6639

5334

20

132

IEC 60320 C-14 PLUGS2 Pole 3 Wire Grounding15 Ampere 250 Volt / 10 Ampere 250 Volt “CE” MARK

70°C

IEC 60320 C-14

57030-NSL Attachment plug.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8 mm (0.315”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81154 available (Use withNo. 57120 bolt-in type outlet only). Use clamp No. 81155with No. 57320 snap-in type outlet only.


3, 20, 22


57030 3, 20, 22

57030-A 2, 7, 12,13, 14,17, 22

57035 3, 18, 20

Attachment plug.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:10 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81154 available (Use withNo. 57120 bolt-in type outlet only). Use clamp No. 81155with No. 57320 snap-in type outlet only.

Attachment plug.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81159 available (Use withNo. 57120 bolt-in type outlet only).

Attachment plug.Black thermoplastic, UL 94 V0.Screw terminals.Max. cord O.D. - External strain relief = 8 mm (0.315”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:10 Amp-250 Volt (UL/CSA),6 Amp-250 Volt (SEV)“CE” MARKRight angle cable entry cover can be rotated to allow cableto exit at 90°, 180°, 270° or 360°.

I C I




57035

57030-NSL

57030

57030-A

21.6

29

6085.5

21

29

81

21

29

5684

3538

47.5

75

133

IEC 60320 C-14 PLUGS2 Pole 3 Wire Grounding15 Ampere 250 Volt / 10 Ampere 250 Volt “CE” MARK

57040-NSLAttachment plug. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8 mm (0.315”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK


3, 20, 22


57040 3, 20, 22

57040-A 22

Attachment plug. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:10 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK

Attachment plug. Right angle.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating: 10 Amp-250 Volt (VDE)“CE” MARK

57045 3, 18, 20,22

Attachment plug. Left angle.Black thermoplastic.Screw type terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK

LEFT ANGLE PLUG

70°C

IEC 60320 C-14

I C I




57045

57040-NSL

57040

57040-A

47

7044.5

21

47

7044.5

21

4168

50

21

5226

19

55

134

57011 Power inlet. Screw on panel mount, frontor rear. Black thermoplastic, polyamid 6.6.Brass terminals, tin plated. Quick discon-nect terminals, 6.3 x 0.8 mm (.250" x .032").


3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

IEC 60320 C-14 INLETS2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK

57311, 57313, 57315

Note: Snap-in models are available for1.0, 1.2, 2.0, 2.5 and 3.0 mm thick panels.Minimum quantity may apply.

57315 3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

Same as inlet No. 57311 except with 3.5 x0.8 mm (.138" x .032") solder terminals.

57313 3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

Same as inlet No. 57311 except with 4.8 x0.8 mm (.187" x .032") quick disconnectterminals.

57311 3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

Power inlet. Snap-in panel mount for 1.5mm thick panels. Black thermoplastic,polyamid 6.6. Brass terminals, tin plated.Quick disconnect terminals, 6.3 x 0.8 mm(.250" x .032").

57015 3, 4, 7, 9,12, 13,14, 17,

18, 20, 22


57013 Same as inlet No. 57011 except with 4.8 x0.8 mm (.187" x .032") quick disconnectterminals.

3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

57011, 57013, 57015

TYPICAL

TYPICAL

40

R3MAX.

27.5 MIN.

MIN.20

M3

MOUNTING HOLE

3.5 DIA. THRU6.3 X 90 C'SINK

4048

23.5

23

28.5

R3MAX.

27.5 -0+0.2

20 +0.2-0

MOUNTING HOLE

25.5

28.5

1.5

30

23


70°C

IEC 60320 C-14

I C I




135


57620


57610

MOUNTING HOLE

MOUNTING HOLE


Power inlet, right angle PC mount. Screwon panel mount from rear. Wave solderableand washable in aqueous solutions. Blackthermoplastic UL 94 V-O. Brass contacts,nickel plated. Terminals tin plated.

57610 3, 17, 18,20, 22

Power inlet, right angle PC mount. Screwon panel mount from rear. Wave solderableand washable in aqueous solutions. Blackthermoplastic, polyamid 6.6. Brass con-tacts, tin plated. Terminals silver, tin plated.

57620 3, 17, 18,20, 22

40 ±0.1530.3

3.6 DIA.

R5.9MAX.

22.5

+0.2

+0.2

40 ±0.1530.3

3.6 DIA.

R5.9MAX.

22.5

+0.2

+0.2

40 ±0.15

±0.19.7

9.05 +0.1-0.2

±0.05

±0.115.85

40 ±0.15

±0.5 3.4 DIA.4 PLCS.

3.524.349.6

14.2527.8

8.73.5

1.6 DIA.

3.6DIA.

PIN SPACING

7 ±0.05

7.3

40 ±0.15

±0.1

±0.05

3.5

8.7

25.531.45

3.4 DIA.4 PLCS.

3.5

27.8

49.6

±0.5

±0.1540

15.85 ±0.1 3.6DIA.

7 ±0.051.6DIA.

PIN SPACING

70°C

IEC 60320 C-14

I C I




136

57715 Power entry module. Integral double pole(DPST) on/off switch. Screw mount fromfront or back. 0.187” x 0.32” (4.8 x 0.8 mm)quick connect terminals. Black UL 94 V-0thermoplastic body.15 Ampere - 250 Volt (UL/CSA)10 Ampere - 250 Volt (International)


3, 17, 18,20, 22

IEC 60320 C-14 POWER ENTRY MODULES2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK

57710

57715


70°C

IEC 60320 C-14

MOUNTING HOLE

MOUNTING HOLE

57710 Power entry module. Integral single pole(SPST) on/off switch. Screw mount fromfront or back. 0.187” x 0.32” (4.8 x 0.8 mm)quick connect terminals. Black UL 94 V-0thermoplastic body.10 Ampere - 250 Volt (UL/CSA)10 Ampere - 250 Volt (International)

3, 17, 18,20, 22

I C I




41.7

31.727.2

3.2 DIA. THRU6.3 X 90° C'SINK

2

30

59 51

M3 THRU(2) PLACES

-0.15+0.1542

R3 -0.2+0

-0+0.2

+0.2-027.5

51


3644

4.2

2

34

35.5

±0.1

-0.2+0 31.5

M3

-0+0.2

+0.2-027.5

36

R2.5

137

57720


57725

MOUNTING HOLE

MOUNTING HOLE


57725 3, 17, 18,20, 22

57720 3, 17, 18,20, 22

IEC 60320 C-14 POWER ENTRY MODULES2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK

70°C

IEC 60320 C-14

Power entry module. Integral double pole(DPST) on/off switch. Snap-in mount.0.187” x 0.32” (4.8 x 0.8 mm) quick connectterminals. Black UL 94 V-0 thermoplasticbody.15 Ampere - 250 Volt (UL/CSA),10 Ampere - 250 Volt (International)

Power entry module. Integral single pole(SPST) on/off switch. Snap-in mount.0.187” x 0.32” (4.8 x 0.8 mm) quick connectterminals. Black UL 94 V-0 thermoplasticbody.10 Ampere - 250 Volt (UL/CSA),10 Ampere - 250 Volt (International)

Note: Snap-in models are available for1.0, 2.0 and 2.5 mm thick panels.Also available with illuminated switches.

I C I




27.231.7

41.744.5

2

30

42

R3 -0.2+0

-0+0.2

+0.2-027.5

31.2

4.2

2

35.527.230

34

-0.2+0 31.5 -0

+0.2

+0.2-027.5

R2.5

138

IEC 60320 C-14 POWER ENTRY MODULES2 Pole 3 Wire Grounding10 Ampere 250 Volt (International); 10 Ampere 250 Volt (UL / CSA) "CE" MARK

57411, 57423, 57425


57211 3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

Note: Snap-in models are available for1.0, 1.2, 2.0, 2.5 and 3.0 mm thick panels.

Same as power entry module No. 57411except with 3.5 x 0.8 mm (.138" x .032")solder terminals.

57425 3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

Same as power entry module No. 57411except with 4.8 x 0.8 mm (.187" x .032")quick disconnect terminals.

57423 3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

Power entry module, single pole. Snap-inmount for 1.5 mm thick panels. Blackthermoplastic, polyamid 6.6. Brass nickelplated terminals and contacts. Fuse drawerfor 5 x 20 mm fuse and spare fuse compart-ment. Quick disconnect terminals, 6.3 x 0.8mm (.250" x .032").

57411 3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

Same as power entry module No. 57211except with 3.5 x 0.8 mm (.138" x .032")solder terminals.

57215 3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

Same as power entry module No. 57211except with 4.8 x 0.8 mm (.187" x .032")quick disconnect terminals.

57213 3, 4, 7, 9,12, 13,14, 17,

18, 20, 22

57211, 57213, 57215

MOUNTING HOLE

MOUNTING HOLE

TYPICAL

TYPICAL


M3

30.5 -0+0.2

+0.2-027.5

R3MAX.

36

R3MAX.

27.5 +0.2

+0.2-031.5

-0

FUSE

30

34

1.5

28.525.5

FUSE

3644 28.5

2.5

34

23.5


Power entry module, single pole. Screwon panel mount, front or rear. Blackthermoplastic, polyamid 6.6. Brass nickelplated terminals and contacts. Fuse drawerfor 5 x 20 mm fuse and spare fuse compart-ment. Quick disconnect terminals, 6.3 x 0.8mm (.250" x .032").

70°C

IEC 60320 C-14

I C I




139

57510Power inlet with single pole fuseholder.Screw on panel mount, front or rear. Blackfiberglass reinforced thermoplastic (PETP)UL 94 V-O. Brass contacts, nickel plated.Brass terminals, silver and tin plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Fuse drawers listed below. Order separatefrom power inlets.


3, 17, 18,20, 22

FUSEDRAWERS FOR POWER INLETS5 x 20 mm 5 x 20 mm 1-POLE + SPARE 2-POLE BLACK w/

1-POLE BLACK 2-POLE BLACK FUSE CASE shorting bar in the neutral side

Standard 57551 57561 57571 57581* Medical 57552 57562 57572 57582* Standards: IEC 601-1, BS 5724 part 1, DIN/VDE 0750 part 1 (for medical applications)

57540 3, 17, 18,20, 22

Power inlet with double pole fuseholder.Snap-in panel mount. Black fiberglassreinforced thermoplastic (PETP) UL 94V-O. Brass contacts, nickel plated. Brassterminals, silver and tin plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Snap-in mount to 1.5 mm thick panels.Snap-in models available for 2.0 mm and2.5 mm thick panels. Contact Factory.Fuse drawers listed below. Order separatefrom power inlets.

57530Power inlet with single pole fuseholder.Snap-in panel mount. Black fiberglassreinforced thermoplastic (PETP) UL 94V-O. Brass contacts, nickel plated. Brassterminals, silver and tin plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Snap-in mount to 1.5 mm thick panels.Snap-in models available for 2.0 mm and2.5 mm thick panels. Contact Factory.Fuse drawers listed below. Order separatefrom power inlets.

3, 17, 18,20, 22

57520 3, 17, 18,20, 22

Power inlet with double pole fuseholder.Screw on panel mount, front or rear. Blackfiberglass reinforced thermoplastic (PETP)UL 94 V-O. Brass contacts, nickel plated.Brass terminals, silver and tin plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Fuse drawers listed below. Order separatefrom power inlets.

IEC 60320 C-14 POWER ENTRY MODULES2 Pole 3 Wire Grounding10 Ampere 250 Volt (International); 10 Ampere 250 Volt (UL / CSA) "CE" MARK

70°C

IEC 60320 C-14

57530, 57540

57510, 57520

MOUNTING HOLE

TYPICAL

MOUNTING HOLE

TYPICAL

±0.1

-0.2+0 31.5

M3

-0+0.2

+0.2-027.5

36

R2.5


FUSE

3644

34

40.54.2

2

-0.2+0 31.5 -0

+0.2

+0.2-027.5

R2.5

FUSE

40.54.2

2

34

30

I C I




140

57320, 57345, 57330

Cat. No. Description

57120, 57125, 57130

Power outlet. Screw on panel mount, frontor rear. Black thermoplastic, polyamid 6.6.Brass terminals, tin plated. Quick discon-nect terminals, 6.3 x 0.8 mm (.250" x .032").Models available with shuttered contacts.

Same as power outlet No. 57320 exceptwith 3.5 x 0.8 mm (.138" x .032") solderterminals.


Same as power outlet No. 57320 exceptwith 4.8 x 0.8 mm (.187" x .032") quickdisconnect terminals.

57330 3, 7, 9,12, 13,14, 17,

18, 20, 22

57345 3, 7, 9,12, 13,14, 17,

18, 20, 22

Power outlet. Snap-in panel mount for 1.5mm thick panels. Black thermoplastic,polyamid 6.6. Brass contacts, tin plated.Brass terminals, tin plated. Quick discon-nect terminals, 6.3 x 0.8 mm (.250" x .032").

57320 3, 7, 9,12, 13,14, 17,

18, 20, 22

Same as power outlet No. 57120 exceptwith 3.5 x 0.8 mm (.138" x .032") solderterminals.

57130 3, 7, 9,12, 13,14, 17,

18, 20, 22

Same as power outlet No. 57120 exceptwith 4.8 x 0.8 mm (.187" x .032") quickdisconnect terminals.

57125 3, 7, 9,12, 13,14, 17,

18, 20, 22

57120 3, 7, 9,12, 13,14, 17,

18, 20, 22

Approvals

IEC 60320 C-13 OUTLETS2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK

70°C

IEC 60320 C-13

MOUNTING HOLE

MOUNTING HOLE

TYPICAL

TYPICAL


-0

32.540

24.8+0.2R4MAX.

M3

4050 30.5

27.5

28


-0

32.5

24.8+0.2R4MAX.

28

35 30.5

27.5

1.5

I C I




141


57640

57630

IEC 60320 C-13 OUTLETS2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK

MOUNTING HOLE

MOUNTING HOLE


Power outlet, right angle PC mount.Screw on panel mount from rear. Wavesolderable and washable in aqueoussolutions. Black thermoplastic UL 94 V-O.Brass contacts, tin plated. Brass terminals,tin plated.

57630 3, 17, 18,20, 22

Power outlet, surface mount design.Black thermoplastic. Quick disconnectterminals, 6.3 x 0.8 mm (.250" x .032").

57640 3, 4, 13,17, 18, 20

3.45 DIA.2 HOLES

26.4

4033.9

7.8 RMAX.

43.5 DIA.4 HOLES

15.1

40

77

8.7

2538.2

3.2

40

15.930.3

49.6

1.63DIA.

3.45DIA.

3.0 DIA. THRU5.5 x 90° C'SINK

223545 35

24

M3 - 2 PLCS.

R2MAX

3524

17

70°C

IEC 60320 C-13

I C I




142


Combination power outlet-inlet. Snap-inmount. Black thermoplastic, polyamid 6.6.Brass terminals, nickel plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Ground terminals NOT connected.

57350 3, 17, 18,20, 22

Approvals

IEC 60320 C-13 / C-14 OUTLET-INLET2 Pole 3 Wire Grounding10 Ampere 250 Volt (Int'l); 10 Ampere 250 Volt (UL / CSA), "CE" MARK

IEC 60320 C-13 / C-14

70°C

MOUNTING HOLE

57350, 57355

Combination power outlet-inlet. Snap-inmount. Black thermoplastic, polyamid 6.6.Brass terminals, nickel plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Ground terminals are connected.

57355 3, 17, 18,20, 22

33 +0.5

X

R2

-0

A

32.5

52

35 28.7

A = 0.8 - 1.2, X = 50.3A = 1.3 - 2.0, X = 50.5

I C I




143



120°C

IEC 60320 C-16

57321, 57325, 57323

57021, 57025, 57023

TYPICAL


57021 3, 4, 7,12, 13,14, 17,

18, 20, 22

57323 3, 4, 7,12, 13,14, 17,

18, 20, 22

57325 3, 4, 7,12, 13,14, 17,

18, 20, 22

57321 3, 4, 7,12, 13,14, 17,

18, 20, 22

57023 3, 4, 7,12, 13,14, 17,

18, 20, 22

57025 3, 4, 7,12, 13,14, 17,

18, 20, 22

Power inlet. Screw on panel mount, frontor rear. Black thermoplastic, polyamid 6.6.Brass terminals and contacts, tin plated.Quick disconnect terminals, 6.3 x 0.8 mm(.250" x .032").




Power inlet. Snap-in panel mount for 1.5mm thick panels. Black thermoplastic,polyamid 6.6. Brass terminals and contacts,tin plated. Quick disconnect terminals, 6.3 x0.8 mm (.250" x .032").



MOUNTING HOLE

40

R3MAX.

27.5 MIN.

MIN.20

M3

TYPICAL

3.5 DIA. THRU6.3 X 90 C'SINK

4048

23.5

23

28.5

2.5

MOUNTING HOLE

-0+0.220

+0.2-027.5

R3MAX.

25.5

28.5

1.5

30

23

I C I




144



C-8 power inlet. Screw mount. Blackthermoplastic. UL 94 V-O, PBT (30%Glassfiber). Solder terminals 1.5 x 2.3 mm."CE" MARK

57701 3, 13, 17,18, 20, 22

Approvals

IEC 60320 C-7 AND C-8 CLASS II2 Pole 2 Wire, 2.5 Ampere 250 Volt

IEC 60320 C-7, C-8

70°C

2835 21

6.5

15

57701

NEMA 1-15P detachable cord set. 1.8meters long. Black. Rated 2.5 ampere 250volt. C-7 connector and NEMA 1-15 plug.

80900 3, 20

84900 6 Australian detachable cord set. 1.8meters long. Black. Rated 2.5 ampere 250volt. C-7 connector and Australian plug.

United Kingdom detachable cord set. 1.8meters long. Black. Rated 2.5 ampere 250volt. C-7 connector and BS 1363A plug.

83900 1

Europlug detachable cord set. 1.8 meterslong. Black. Rated 2.5 ampere 250 volt.C-7 connector and CEE 7 / 16 plug.

81900 22

57703 3, 13, 17,18, 20, 22

C-8 power inlet. Snap-in mount. Blackthermoplastic. UL 94 V-O, PBT (30%Glassfiber). Solder terminals 1.5 x 2.3 mm."CE" MARK

81900

22.52.5

28

16

57703

57702

57702 3, 17, 20,22

C-7 outlet. Bolt in. Panel mount. Blackthermoplastic. Solder terminals."CE" MARK


C-6 power inlet. Screw mount front or rear.UL 94 V-O rated black thermoplastic.Solder terminals."CE" MARK

57705 3, 4, 13,17, 18,20, 22

Approvals

IEC 60320 C-6 INLET2 Pole 2 Wire, 2.5 Ampere 250 Volt

IEC 60320 C-5, C-6

70°C

57705


I C I




50 3229

25 16

40

3921.530

22.5 20.5

19 17.5

90035

IEC 60320 jumper cord. C-14 plug, C-5connector. 10A-250V, 2.5A-250V 18/3AWG, SJT, 105°C / 1.0 mm H05VV-F.Black. 1.8 meters (6 foot). UL, CSA, VDEapprovals. “CE” Mark.NOTE: See cord set section pages 14-26for mating detachable cords for use invarious countries.

90035 3, 20, 22

“CE” MARK

NOTE: See cord set section pages 14-26for mating detachable cords for use invarious countries.

145

IEC 60320 C-19 CONNECTORS2 Pole 3 Wire Grounding20 Ampere 250 Volt (UL / CSA); 16 Ampere 250 Volt (International) "CE" MARK

57090Connector body.Black thermoplastic.Screw terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 20 Amp-250 Volt (UL/CSA),16 Amp-250 Volt (VDE)Connector retaining clamp No. 81154 available (Usewith No. 57081 bolt-in type inlet only).Right angle connector available. Cat.# 57090-RA


3, 18, 20,22


57090-A 3, 20

57090-V 3, 20

Connector body.Black thermoplastic.Screw terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 11 mm (0.433”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 20 Amp-250 Volt (UL/CSA)“CE” MARKConnector retaining clamp No. 81115 available (Usewith No. 57081 bolt-in type inlet only).

Connector body.Black thermoplastic, 65°C.Compression terminals.Max. cord O.D. - External strain relief = 12 mm (0.472”)Max. cord O.D.- Internal cord grip = 12 mm (0.472”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 20 Amp-250 Volt (UL/CSA)Connector retaining clamp No. 81115 available (Usewith No. 57081 bolt-in type inlet only).

70°C

IEC 60320 C-19

57091 22Connector body.Black rubber.Screw terminals.Max. cord O.D. - External strain relief = 11 mm (0.433”)Max. cord O.D.- Internal cord grip = 9 mm (0.354”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating: 16 Amp-250 Volt (VDE)“CE” MARK

I C I




57090

57091

57090-A

57090-V

57090-M

Connector body. Heavy duty.Black Nylon, 65°C.Dust/moisture seal provided at cord grip.Cord grip range = 9.0-16.5 mm (0.360-0.655”)Clamp type terminals accept 4.0 mm (10 AWG) conductorsRating: 20 Amp-250 Volt (UL/CSA)

57090-M 3, 20

98

32

63

25 24

69

28

36

84

5272 36

DIA

446545

58

30

9257

23 21

NOTE: See pages 38-39 for moldedcord sets with C-19/C-20 connectors.

146

IEC 60320 C-20 PLUGS2 Pole 3 Wire Grounding20 Ampere 250 Volt (UL / CSA); 16 Ampere 250 Volt (International) "CE" MARK

70°C

IEC 60320 C-20

57110 Attachment plug.Black thermoplastic.Screw terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 20 Amp-250 Volt (UL/CSA),16 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81154 available (Usewith No. 57100 bolt-in type inlet only).Right angle plug available. Cat. # 57110-RA


3, 18, 20,22


57110-V 3, 20 Attachment plug.Black thermoplastic, 65°C.Compression terminals.Max. cord O.D. - External strain relief = 12 mm (0.472”)Max. cord O.D.- Internal cord grip = 12 mm (0.472”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 20 Amp-250 Volt (UL/CSA)

I C I




57110

57110-V

26

5893

33

35

8570

37

NOTE: See pages 38-39 for molded cord sets with C-19/C-20 connectors.

147

57080


57081, 57082

MOUNTING HOLE

MOUNTING HOLE

TYPICAL


Power inlet, IEC 60320 C-20. Screw onpanel mount. Black thermoplastic. Brassterminals and contacts, nickel plated. Screw/ compression terminals.

UL / CSA rated: 20 ampere 125 volt

20 ampere 250 voltVDE rated: 16 ampere 250 volt

Power inlet, IEC 60320 C-20. Screw onpanel mount. Black thermoplastic, UL 94 V-O. Brass terminals and contacts, nickelplated. Quick disconnect terminals, 6.3 x0.8 mm (.250" x .032").


16 ampere 250 voltVDE, SEMKO, SEV, NEMKO, DEMKO, FI,SETI, KEMA rated: 16 ampere 250 volt

57080 3, 18,20, 22

3, 4, 7,12, 13,17, 18,20, 22

57081

3.2 DIA. THRU6 X 90° C'SINK

2932

30

4253

25

4232.5

M3

R3MAX.


30

4253 35

32

3342

25R3MAX.

M3


3, 4, 7,12, 13,17, 18,20, 22

57082

IEC 60320 C-20 INLETS2 Pole 3 Wire Grounding20 Amp 125 Volt, 16 Amp 250 Volt (UL / CSA); 16 Amp 250 Volt (Int’l) "CE" MARK

70°C

IEC 60320 C-20

I C I




148

57745


57740

Power inlet, IEC 60320 C-20. Snap-inmount to 1.5 mm thick panels. Blackthermoplastic. Brass terminals and con-tacts, nickel plated. Quick disconnectterminals, 6.3 x 0.8 mm (.250" x .032").



NOTE: Snap-in models available fordifferent panel thicknesses.


57745 3, 20, 22

57740 3, 20, 22

Approvals

IEC 60320 C-20 INLETS2 Pole 3 Wire Grounding20 Amp 125 Volt, 20 Amp 250 Volt (UL / CSA); 16 Amp 250 Volt (Int’l) "CE" MARK

MOUNTING HOLE

MOUNTING HOLE


70°C

IEC 60320 C-20

I C I




36 3121

28

3

24.224.0

32.232.0

R 3.0 MAX.

3.0

3621

28

26

24.224.0

32.232.0

R 3.0 MAX.

149


57735

57730

MOUNTING HOLE

MOUNTING HOLE


Power entry module. Integral double pole(DPST) on/off switch. Screw mount fromfront or back. 6.3 x 0.8 mm (.250" x .032")quick connect terminals. Black UL 94 V-0thermoplastic body.Rated 20 Ampere -125 Volt, 20 Ampere -250 Volt (UL/CSA), 16 Ampere - 250 Volt(International).

57730 3, 20, 22

Power entry module. Integral double pole(DPST) on/off switch. Snap-in mount to 1.5mm thick panels. 6.3 x 0.8 mm (.250" x.032") quick connect terminals. Black UL 94V-0 thermoplastic body.Rated 20 Ampere -125 Volt, 20 Ampere -250 Volt (UL/CSA), 16 Ampere - 250 Volt(International).NOTE: Snap-in models available fordifferent panel thicknesses.

57735 3, 20, 22

IEC 60320 C-20 POWER ENTRY MODULES2 Pole 3 Wire Grounding20 Amp 125 Volt, 20 Amp 250 Volt (UL / CSA); 16 Amp 250 Volt (Int’l) "CE" MARK

70°C

IEC 60320 C-20

I C I




4.8

DIA. 3.3 THRUDIA 6.4 COUNTERBORE

3632.2 52

56.8

26.6

46.25767

R 2.95±0.05

46.5±0.10

32.5±0.10

26.6

4.832.256.8

46.2

5236

50

R 2.95±0.05

DIA. 3.6 THRU(2) PLACES

32.5±0.10

46.5±0.10

57.0±0.10

150

57100 Power outlet. Screw on panel mount.Black thermoplastic. Brass horizontalterminals and contacts, nickel plated.Quick disconnect terminals, 6.3 x 0.8 mm(.250" x .032").


20 ampere 250 voltVDE rated: 16 ampere 250 voltNOTE: Available with screw terminals.Catalog number 57100-ARated: 16 ampere 250 volts.European approvals only.


3, 17, 18,20, 22

IEC 60320 C-19 OUTLETS2 Pole 3 Wire Grounding20 Amp 125 Volt, 20 Amp 250 Volt (UL / CSA); 16 Amp 250 Volt (Int’l) "CE" MARK

57105, 57107

57100

TYPICAL


MOUNTING HOLE

MOUNTING HOLE

57105 3, 7, 17,18, 20, 22

Power outlet. Screw on panel mount.Black thermoplastic. Brass verticalterminals and contacts, nickel plated.Quick disconnect terminals, 6.3 x 0.8 mm(.250" x .032").




45

34

384155

45

30

38

R3MAX.

M3

Power outlet. Screw on panel mount.Black thermoplastic. Brass vertical termi-nals and contacts, nickel plated. 4.0 x 0.8mm (.157" x .032") quick disconnect /solder terminals.



571074554 37

34

34


R3MAX.

M3

3845

30

3, 7, 17,18, 20, 22

70°C

IEC 60320 C-19

I C I




151


57103

MOUNTING HOLE


Power outlet. Snap-in mount to 1.5 mmpanels. Black thermoplastic. Brass hori-zontal terminals and contacts, nickelplated. Quick disconnect terminals, 6.3 x0.8 mm (.250" x .032").



NOTE: Snap-in models available fordifferent panel thicknesses.

57103 3, 20, 22

IEC 60320 C-19 OUTLETS2 Pole 3 Wire Grounding20 Amp 125 Volt, 20 Amp 250 Volt (UL / CSA); 16 Amp 250 Volt (Int’l) "CE" MARK

70°C

IEC 60320 C-19

I C I




42 41

38

34

29.729.5

37.737.5

R3 MAX.

152

NOTES

I C I



IEC 60320 WIRING DEVICES - INTERNATIONAL...

Documents

Transcript of IEC 60320 WIRING DEVICES - INTERNATIONAL...