IEC 601-1 (Third Ed.)
Transcript of IEC 601-1 (Third Ed.)
TRF No: DTL-091 A1
Test Report issued under the responsibility of:
Prodigy Technology
Consultant Co., Ltd.
IEC 60601-1
Medical electrical equipment
Part 1: General requirements for basic safety and essential performance Report Reference No. ................... : M131107-04-A1
Date of issue ................................. : 2013-12-05 ..................................................
Total number of pages ................. : 88 ..................................................
CB Testing Laboratory ................. : Prodigy Technology Consultant Co., Ltd.
Address ......................................... : No.181, Sec. 2, Wunhua 1st Rd., Linkou District, New Taipei City 244, Taiwan CHINESE TAIPEI
Applicant’s name .......................... : WISTRON CORP
Address ......................................... : 21F 88 SEC 1 HSINTAI 5TH RD HSICHIH NEW TAIPEI, 221 TAIWAN
Test specification:
Standard ........................................ : EN 60601-1: 2006 /
IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007)
Test procedure .............................. : CB Scheme
Non-standard test method………..: None
Test item description .................... : LCD MONITOR
Trade Mark .................................... :
Manufacturer ................................. : Same as applicant
Model/Type reference ................... : DR-17P
Ratings .......................................... : For Power Adapter input rating: 100-240Vac, 50-60Hz, 1.6-0.7A For LCD MONITOR input rating: 24Vdc, 1.2A
Page 2 of 88 Report No. M131107-04-A1
TRF No: DTL-091 A1
Testing procedure and testing location:
CB Testing Laboratory:
Testing location/ address ...................... : Prodigy Technology Consultant Co., Ltd. / No.181, Sec. 2, Wunhua 1st Rd., Linkou District, New Taipei City 244, Taiwan CHINESE TAIPEI
Associated CB Test Laboratory:
Testing location/ address ...................... :
Tested by (name + signature) ..... : Frank Chang
Approved by (+ signature)........... : Yama Cheng
Testing procedure: TMP
Tested by (name + signature) ..... :
Approved by (+ signature)............ :
Testing location/ address ...................... :
Testing procedure: WMT
Tested by (name + signature) ..... :
Witnessed by (+ signature) .......... :
Approved by (+ signature)........... :
Testing location/ address ...................... :
Testing procedure: SMT
Tested by (name + signature) ..... :
Approved by (+ signature)........... :
Supervised by (+ signature) ........ :
Testing location/ address ...................... :
Testing procedure: RMT
Tested by (name + signature) ..... :
Approved by (+ signature)........... :
Supervised by (+ signature) ........ :
Testing location/ address ...................... :