IE Browser- User Manual (For Windows PC)

1. How to log into camera on IE

Note: Our camera does not support view on Chrome, Firefox and Safari

Download “UC Client” via this link: www.cameracd.com, to search out camera ip address as below(Please refer to separate Search tools User Manual if you need more details)

IE address bar enter the IP address of the camera, press the Enter key to enter the camera login

interface (Default username admin and password 123456), as below

Note:

1) Since this Player has plug in, most of the antivirus program on your PC will regard it as virus

and stop it from install. Please take note this program will not cause any damage to your

computer, and you need to have it installed and allow it operate on your PC then you can view

the camera on IE succeed.

2) If you can not install the player succeed, please check If your PC has this program – Microsoft

Visual Studio_32-bit, you can search on your PC to download

3) If you can not log into IE, please check if your camera IP address and your PC are in the same

segment

2. Brief instruction for IE Menu

Home

Configuration--->Camera

Image: Here you can set camera working mode and image flip function and image white balance

modify

OSD: You can change user-defined information such as Camera name, Font size and Time stamp

here

Pricacy Mask: You can customize a region of the camera does’t show

Video: Get camera video details here

Configuration--->Network

Basic: Get camera IP information here

P2P: View cloud ID and settings to enable P2P service

Access Encryption: Set RTSP and ONVIF encryption, effectively protect the video security

Configuration--->Event

Video Detect: Here open video detection, only supports cloud storage(Please refer to separate

QuickStart Guide Manual if you need more details)

Configuration--->Storage

General Config: local storage: Memory Card & USB(not supported) and network storage: NFS

(cloud storage support)

Schedule Record: Set the schedule video

Device Manager: Storage management

Configuration--->System

User Manage: You can change default User name and password here

Device Language: You can change camera language

Date&Time: Here you can modify the camera's time

Factoty&Reset: Reset camera to factory settings

Reboot: Restart camera

Uprage: Upgrade camera version here(Upgrade can not power off and network)

Configuration--->Information

Version: Here view camera firmware version

Note: Camera default IP address:192.168.0.123 (when camera and computer are directly connected)