IDRO GAS ENGINEERING S.A.S. · Pipe saddles available from DN 25 to DN 1500, for cast iron/ductile...
Transcript of IDRO GAS ENGINEERING S.A.S. · Pipe saddles available from DN 25 to DN 1500, for cast iron/ductile...
IDRO GAS ENGINEERING S.A.S.
www.idrogasengineering.it
ADVANCED FITTING SYSTEMFOR WATER AND GAS PIPELINES
RAPIDOPipe saddles available from DN 25 to DN 1500, for castiron/ductile iron, A/C, steel, fiber-glass,PVC/PE and concrete pipes.Threaded or flanged outlet up to 6”.
EUROPAService connection valves, designed for the use also with saddles type
“RAPIDO”, with internal sealing plug with elastomeric rubber, soft sealing andstem made of stainless steel.
Sizes from ¾” to 2”.
TREPIWide tolerance three-part clampsfor repairing and tapping underpressure. Threaded or flangedoutlet up to 8”, available in sizesfrom DN 40 to DN 800 for castiron/ductile iron, A/C, steel,fiber-glass and concrete pipes.
DUEPIWide tolerance two-part clamps for repairing and tapping
under pressure. Threaded outlet ½”, available in sizes fromDN 15 to DN 200.
INOXGISWrap-around clamps for repairing under pressure, produced
in a variety of lenghts for sizes from DN 15 to DN 2000.Suitable for cast iron/ductile iron, A/C, steel,
fiber-glass, PVC/PE and concrete pipes.
ETERNOEntirely stainless steel wrap-around clamps for repairing ortapping under pressure, produced in a variety of lenghts for sizesfrom DN 15 to DN 2000, with threaded or flanged branch up to8”. Suitable for cast iron/ductile iron, A/C, steel,fiber-glass, PVC/PE and concrete pipes.
STOPAdjustable bell joint repair clamps for the leak repair of socketsand spigot joints on cast iron/ductile iron pipes.They can also
be used for the repairing of leakages on joints of pipes ofother material (A/C, fiber glass, steel, plastic).
Available in sizes from DN 50 to DN 1200.
UNIVERSALEUltra-wide, wide and medium tolerancecouplings/adaptors/end-caps (compression type). Available insizes from DN 20 to DN 800.
The drawings, photographs, sizes and technical datas are not binding but can be varied for constructive ormarket reasons. Even partial reproduction of texts,drawings or photographs is forbidden by law.
DEALER
UNIVERSALE SP
FORATUBI
CHIUSINI
Idro Gas Engineering S.A.S.Via Roma 10113010 Motta de’ Conti (Vc)Italy
VAT: IT 01466450069
tel.: ++390161780400 - 780444fax: ++390161780909 - 780411
e-mail: [email protected]
Tailor-made fittings in steel(couplings/adaptors/stepped couplings/end-caps),available in sizes from DN 100 to DN 2000.
Pipe drilling machine to use in connection with our “RAPIDO”,“TREPI”, “DUEPI” and “ETERNO” products on every kind of
pipe. Drill sizes from ½” to 6”.
Various types of surface boxes used for valves,hydrants, air releases, etc. All types are with adjustableheight.