icracker7803
-
Upload
himanshu.argalon -
Category
Small Business & Entrepreneurship
-
view
1 -
download
0
description
Transcript of icracker7803
![Page 1: icracker7803](https://reader036.fdocuments.us/reader036/viewer/2022082914/61095ef83a89f91564421875/html5/thumbnails/1.jpg)
Top 100 Baths in Northam Find Baths ads in Northam. Buy and sell almost anything on icracker
classifieds.
Traditional freestanding baths fall into a number of broad categories
with regard to their general shape, two other issues of equal
importance are the style of foot and the type of tap fittings required.
Each of these and the main styles of traditional bath tub shape are
described below. The information in this article is about
contemporarily manufactured traditional style freestanding baths
not antique baths.
Bath Foot Style
Traditional bath feet usually come in one of four broad styles
although the variation within those styles can be great. Plain feet,
ball and claw feet, often just called claw feet are in the form of a
talon or claw gripping onto a ball which rests on the floor and takes
the weight of the bath, lions paw feet are shaped like the paw of a
![Page 2: icracker7803](https://reader036.fdocuments.us/reader036/viewer/2022082914/61095ef83a89f91564421875/html5/thumbnails/2.jpg)
lion standing on the bathroom floor and then there are various more
or less Art Deco style feet that you can find on a few freestanding
baths. Of these three categories the ball and claw feet come in such
wide variation that the more stylised versions are barely
recognisable as such with much of the detail gone. Plain feet are
similar to the ball and claw in general shape but have no detail on
them.
Bath feet are available in various materials and finishes, cast iron feet
must be painted, most often they are painted black, white or the
same colour as the bathroom walls. Feet are also available made
from brass, either with a polished brass finish (which is often used
with gold taps) or in electroplated chrome, gold (usually called
antique gold), brushed nickel or bright nickel. Not all traditional
baths have feet. In general feet are not interchangeable between
baths although they may sometimes be that specific manufacturers
use the same feet on two or more of their baths. You should never
buy a bath without the feet unless you already know you can get the
proper feet manufactured for that bat
Roll Top and Tap Fittings
Its important to know when you buy a traditional freestanding bath
what sort of taps you will use with it and what you will need to
attractively plumb them in Traditional freestanding baths are often
![Page 3: icracker7803](https://reader036.fdocuments.us/reader036/viewer/2022082914/61095ef83a89f91564421875/html5/thumbnails/3.jpg)
called roll top baths, this refers to the rolling edge of many
traditional style of bath. It is not possible to mount a tap onto the
rolling edge of a roll top bath. A traditional solution to this was to
drill the taps hole in the side of the bath just above the overflow the
taps used are shaped to come up at right angles to the water inlet so
they are in the same form as a deck mounted set of taps. These taps
are called globe taps, they usually come as a pair of taps, hot and
cold. Globe taps are only really used these days with antique cast
iron roll top baths
More generally these days roll top baths onto which taps can be
mounted have what's called a tap platform. A tap platform is a
flattened part of the bath edge into which tap holes can be drilled
and taps mounted. For baths onto which taps can't be mounted you
will use either wall mounted or floor mounted taps. Note also that
there are some contemporarily manufactured and, broadly speaking,
traditionally styled baths that do not have a roll top as such and onto
which taps could in theory be mounted anywhere on the edge of the
bath.
Traditional Single Ended
This is the simplest of the traditional bath styles, its a level topped
tub sitting on four feet, in plan its rounded at the head end (where
your head would go if you were lying in it) and flat at the foot end.
![Page 4: icracker7803](https://reader036.fdocuments.us/reader036/viewer/2022082914/61095ef83a89f91564421875/html5/thumbnails/4.jpg)
The plug hole and overflow are at the foot end of the bath. If it has a
tap platform that is also at the foot end of the bath. Its distinguished
from a slipper bath by being the same height all around the top of
the bath.
Traditional Double Ended
This is essentially the same as the traditional single ended bath but in
plan it is rounded at both ends and the plug hole and overflow in the
middle of one of the long sides of the bath. If it has a tap platform
then that is also in the middle along the long side of the bath. Like
the single ended bath it is the same height all around the top of the
bath and it sits on four feet of one style or another..
Find Baths ads in Northam. Buy and sell almost anything on icracker
classifieds.Free, local, classifieds, classified Ads, icracker,
icracker.com.au, Northam, Baths, classes, real estate, babysitter,
dog, cat, shared rooms, pets, rental, apartments, apartment for rent,
jobs, resume, cars, housing, furniture, personals, services, events,
appliances marketplace, private, for free, search, find for more info
vidit https://northam.icracker.com.au/baby-children/baths/
Slipper Baths
A slipper bath is a traditional single ended bath but with a the head
end of the bath higher than the foot end. The head end of the bath
![Page 5: icracker7803](https://reader036.fdocuments.us/reader036/viewer/2022082914/61095ef83a89f91564421875/html5/thumbnails/5.jpg)
rises up, usually with some style, to make the (heeled) 'slipper' shape
after which the bath is named. Traditional slipper baths sit on four
feet, often with slipper baths the front feet and back feet are slightly
different shapes and are not interchangeable. Short slipper baths,
1500mm. are popular in en-suites. Large slipper baths are suitable
for a very luxurious and indulgent setting. Slipper baths are often but
not always quite wide and deep.
Bateau Baths
A bateau bath is a double ended version of the slipper bath, whereas
the slipper bath goes up at just one end the bateau is symmetrical
and rises up at both ends. Like the slipper bath its generally on four
feet, unlike the slipper bath there shouldn't usually be different feet
required for the front and back. Bateau baths are found both with
and without tap ledges for mounting taps.
Boat Baths
A boat bath is a bateau bath without feet, instead it generally has a
skirt that goes down to a plinth which takes the weight of the bath
![Page 6: icracker7803](https://reader036.fdocuments.us/reader036/viewer/2022082914/61095ef83a89f91564421875/html5/thumbnails/6.jpg)
Keyhole Shower Baths
These keyhole shaped baths, where the round end of the bath was
for a shower are very rare and there may well be no non-bespoke
manufacturers of them left, although up until recently they could be
bought as a non-bespoke product.
Variations
Of course there are variations, in particular, there are a number of
baths designed to tile in including double ended, single ended and
corner baths that nevertheless have feet and are in effect
freestanding (but tile-able in). Finally there are a few distinctly Art
Deco baths with simple lines and angles of that period style.
Find Baths ads in Northam. Buy and sell almost anything on icracker
classifieds.Free, local, classifieds, classified Ads, icracker,
icracker.com.au, Northam, Baths, classes, real estate, babysitter,
dog, cat, shared rooms, pets, rental, apartments, apartment for rent,
jobs, resume, cars, housing, furniture, personals, services, events,
appliances marketplace, private, for free, search, find for more info
vidit https://northam.icracker.com.au/baby-children/baths/