iPCD » Triple Combo Sonic » Quad Combo iPCD™ » Triple Combo Sonic » Quad Combo
ICP2-COMBO - Softlogsoftlog.com/userfiles/file/Downloads/ICP2-COMBO.pdf · a host system. Adaptable...
Transcript of ICP2-COMBO - Softlogsoftlog.com/userfiles/file/Downloads/ICP2-COMBO.pdf · a host system. Adaptable...
www.softlog.com
Secure ProgrammingUtilizing patent-pending technology, this optional software feature provides several layers of protection that dramatically reduce the risk of unauthorized reconstruction of hex files. These include strong hex file encryption, a counter that ensures the number of programmed devices does not exceed a pre-defined value, and a secure buffer of “invisible” hex data stored in ICP2-COMBO protected memory.
Microchip-OrientedReflecting our focus and expertise in working with Microchip, ICP2-COMBO is specifically designed for full compatibility with all Microchip microcontrollers and peripheral components.
ATE CompatibleFinal test machine (FTM) functions in DLL allow the ICP2-COMBO software to easily integrate with test equipment, working in either standalone mode or driven by a host system. Adaptable to bed-of-nails and other types of ATEs, ICP2-COMBO helps you preserve your investment in test equipment.
24x7 SupportWe understand the importance of zero downtime on your assembly line. Softlog’s technical support engineers are available round-the-clock to provide you with immediate solutions to operational and maintenance issues which may arise.
ICP2-COMBOProduction Quality In-Circuit 12-Channel Programmer
ICP2-COMBO is the top high-volume model in our line of high-speed, production-grade in-circuit programmers for Microchip microcontrollers. Incorporating twelve independent channels and expandable to up to 60 channels in a daisy chain configuration, ICP2-COMBO is ideal for non-stop, mass production operations. Using our breakthrough Secure Programming technology, ICP2-COMBO ensures the highest level of protection for your intellectual property during the manufacturing process.
Up to 60 true parallel channelsFast high-volume programmingEasy ATE integrationBuilt-in opto-relay barrier for target linesGalvanic isolation of control lines Innovative, multi-layer IP protection (optional)
USB
RS232
POWER+12
ICP2-COMBO
13.5V
Softlog Systems specializes in In-Circuit Serial Programming (ICSPTM) for Microchip microcontrollers. Since 1998, our high-performance, cost-effective ICSPTM solutions have been used to manufacture millions of products worldwide. Leveraging our technical know-how and extensive field experience, Softlog Systems’ ICP family of production-grade programmers reduce manufacturing costs and accelerate time-to-market.
About Softlog Systems
Softlog Systems (2006) Ltd. 6 Hayotzrim st., Or-Yehuda, 6021820, Israel
Tel: 972-3-9515359 Fax: 972-3-9527520email: [email protected] www.softlog.com
Programmable HardwareWired remote programming and environment switch: Go/Pass/Fail/EnvProgrammable Vdd (2.0 to 5.5V) and Vpp (2.0 to 13.5V)Programmable delay between Vdd and Vpp (0.1 to 250ms)Programmable clock/data speed (500KHz to 10MHz)Programmable Vdd source (ICP2-COMBO or target)Vdd current limit: 250mA per channelPrevents damage to connected microcontroller in case of power ON and power OFF
Easy-to-Use SoftwareWindows® DLL/Command line functions for automatic programming (optional)Secure programming feature including hex file encryption, counter and secure buffer (optional)
High-Speed, Scalable Programming DeviceDesigned for in-circuit (ICSP™) programming of 8-bit PIC® MCUs, 16-bit PIC® MCUs & dsPIC® DSCs (optional), 32-bit PIC® MCUs (optional), Keeloq® encoders (optional) and serial EEPROMsUltra fast programming of up to 60 channels simultaneouslyBuilt-in opto-relay barrier for target linesGalvanic isolation of control and communication lines LAN, USB and RS-232 interfaceOn-board 4MB flash memory per channel for non-volatile storage of HEX, configuration and serialization files (6 environments)Multiple serialization schemes: Sequential, random, pseudo-random and user file 1 to 8 bytes, automatic “retlw” or “raw data”Tests Vdd and Vpp for overload with indication by softwareDimensions: 215x118x90mm
Windows®-95/98/2000/ME/XP/NT/Vista/7/8USB, RS-232 port or LAN
Host System Requirements
Typical in-circuit programming connection (1 channel shown)ICP2-COMBO
Production Quality In-Circuit 12-Channel Programmer
Typical Application
12 targets
Up to 60 targets
Single board with multiple
targets
(4 channels shown)
MCU2MCU1
MCU4
MCU3
up to 5 boxes in daisy chain connection
LAN