IBM.Actualtests.000-218.v2012-02-17.by.sindhu company has set up an adapter Container JVM to...

000-218qa104_formatted

Number: 000-000Passing Score: 800Time Limit: 120 minFile Version: 1.0

http://www.gratisexam.com/

IBM 000-218

IBM Sterling B2B Integrator V5.2, Solution

ImplementationIBM 000-218 Exam

Topic 1, Volume A

Exam A

QUESTION 1A company has set up an adapter Container JVM to increase performance and reliability. Which three serveradapters are available to be used with the container? (Choose three.)

A. Connect:DirectB. FTPC. HTTPSD. JMSE. OFTPF. SMTP

Correct Answer: ABCSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 2A customer has deployed a two node active-active IBM Sterling B2B Integrator (SBI) cluster in the secure zoneon two servers. The customer has installed two servers in the DMZ for the purpose of installing remote SBIPerimeter Servers to facilitate communications with external partners. External partners will connect to anexternal IP Load Balancer that will distribute inbound FTP/S, SFTP and HTTP Client sessions across thePerimeter Servers. The customer requirement is that if any single server fails, all the other SBI nodes andremote Perimeter Server instances must continue to activelyThe customer? requirement is that if any singleserver fails, all the other SBI nodes and remote Perimeter Server instances must continue to actively handleinbound sessions for each protocol. What is the minimum number of remote Perimeter Server instances thatmust be deployed in the DMZ?

A. 2B. 3C. 4D. 12

Correct Answer: CSection: (none)Explanation


QUESTION 3A developer has created a Business Process (BP) that uses the File System Adapter to write a file IBM 000-218Examto the file system. Where should the target file name be stored in the BP so that the File System Adapter canretrieve it?

A. Primary DataB. Process DataC. Primary DocumentD. Process Document

Correct Answer: BSection: (none)

Explanation


QUESTION 4What would cause the IBM Sterling B2B Integrator (SBI) database size to continually grow and thus impactperformance?

A. persistence level set to FULLB. improperly sized database connection poolsC. index, archive, and purge services not runningD. incorrect number of database threads assigned



QUESTION 5A Business Process (BP) implementer wants to use the Document Keyword Replace Service in the GraphicalProcess Modeler (GPM) but the service is not showing in the All Services stencil. What needs to be done tomake the Document Keyword Replace Service show in the GPM?

A. Update the license file.B. Create a service configuration.C. Execute install3rdParty.sh/.cmd.D. Add JavaTask to adapters.properties.

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:IBM 000-218 Exam

QUESTION 6A company wants to change their document storage to file system storage for a IBM Sterling B2B Integrator(SBI) cluster deployment. Which configuration needs to exist?


A. with a shared file system mounted as /FS:document_dir.jdbc.properties=/shareddefaultDocumentStorageType.jdbc.properties=FS

B. with a shared file system mounted as /FS:document_dir.jdbc.properties=/FS

defaultDocumentStorageType.jdbc.properties=sharedC. with a shared file system mounted as /shared:

document_dir.jdbc.properties=/FSdefaultDocumentStorageType.jdbc.properties=FS

D. with a shared file system mounted as /shared:document_dir.jdbc.properties=/shareddefaultDocumentStorageType.jdbc.properties=FS

Correct Answer: DSection: (none)Explanation


QUESTION 7The system default for the amount of time a Business Process (BP) remains online in the system is set to fivedays. How can that value be overridden?

A. Update noapp.properties.B. Modify the lifespan setting for a BP.C. Update with the Performance Tuning wizard.D. Create a new Retention Service configuration.



QUESTION 8Based on the screen shot,IBM 000-218 Exam

how many days will documents and other trackable data stay in the system by default?

A. 1 dayA.1 dayB. 2 daysB.2 daysC. 3 daysC.3 daysD. The setting is controlled at the individual Business Process (BP) level.D.The setting is controlled at the

individual Business Process (BP) level.

Correct Answer: C

Section: (none)Explanation


QUESTION 9Given the following information from the servers.properties file:

noapp=/home/SBI/properties/noapp.properties jboss=/home/SBI/properties/noapp.properties jdbcService=/home/SBI/properties/jdbc.propertiesjdbcServiceCustomer=/home/SIB/properties/jdbc_customer.properties si_config=/home/SBI/properties/sandbox.cfgIBM 000-218 Examcustomer_overrides=/home/SBI/properties/customer_overrides.properties filesystem=/home/SBI/properties/filesystem.properties

The customer would like to change the default directory to store on-disk documents to a new directory. Howshould this override be configured in the system?

A. Edit sandbox.cfg and add document_dir=<new directory full path>.B. Edit filesystem.properties and add filesystem.document_dir=<new directory full path>.C. Edit customer_overrides.properties and add jdbcService.document_dir=<new directory full path>.D. Edit jdbc_customer.properties and add jdbcServiceCustomer.document_dir=<new directory full path>.



QUESTION 10Of the locations where persistence levels can be set, which has the highest precedence?

A. GlobalB. SystemC. Trading PartnerD. Business Process (BP) Definition



QUESTION 11A company allows trading partners to send files to it via SFTP. Which port needs to be configured on the SFTPServer adapter to define the communication port?

A. Data PortB. Send PortC. Listen PortD. Passive Port



QUESTION 12A company is planning to offer FTPS connection to its community of trading partners. They already have oneserver certificate in IBM Sterling B2B Integrator (SBI) that they want to use for the FTPS server in theproduction environment. In the development environment they want to use a self-signed test certificate. Wherecan the test certificate be created?

A. Trading Partner > Digital Certificates > CAB. Trading Partner > Digital Certificates > TrustedC. Trading Partner > Digital Certificates > SystemD. Trading Partner > Digital Certificates > Cert Manager



QUESTION 13IBM Sterling B2B Integrator (SBI) is installed with a LDAP connection to allow users to log in using theirusername/password stored in the LDAP server. A user is created in SBI as a local user and the InternalUserpassword policy is specified. The InternalUser policy states that the password has to be changed every 30days. After 29 days the SBI security administrator deletes the InternalUser policy from the system. When theuser logs in two days later, will the user be prompted to change the password?

A. Yes, because of the configuration of the original password policy.B. No, because the policy is deleted so the user has no password policy.C. The user will not be logged in because there is no valid policy specified.D. No, the policy is irrelevant since the password is managed by the LDAP server.



QUESTION 14A company requires FTP users to be unable to login after five failed login attempts. How can this beaccomplished?IBM 000-218 Exam

A. Create a Lockout Policy.B. Configure the FTP user account.C. Configure a LoginPolicy service configuration.D. Add an entry to customer_overrides.properties.

Correct Answer: A

Section: (none)Explanation


QUESTION 15IBM Sterling B2B Integrator (SBI) uses a certificate to encrypt persisted documents. If this certificate needs tobe replaced with a deployment specific certificate, which certificate store is the new certificate imported intobefore updating the certificate name in the customer overrides property file?

A. CAB. TrustedC. SystemD. Certificate



QUESTION 16Due to a rise in fraud, a financial company risk management team is looking to implement more stringentsecurity measures. What are two security features to address the fraud? (Choose two.)

A. FTP Client and Server Adapters for exchanging dataB. identification policies for recipients of data in a file transferC. Cyber Security Operations Center (CSOC) Comprehensive Cyber Threat Detection and ResponseD. Controlled Substances Ordering System (CSOS) to permit electronic transmission of orders for controlled

substancesE. a suite of encryption services to ensure that data remains secure and meets organization, industry, and

government mandates for datasecurity

Correct Answer: BESection: (none)Explanation


QUESTION 17An administrator is getting error notifications from the Schedule_IndexBusinessProcessService stating that aprevious instance of the Schedule_IndexBusinessProcessService is still running. Which menu screen in thesystem displays the conflict identified in the notification?

A. Operations > Lock ManagerB. Operations > System > TroubleshooterC. Deployment > Services > ConfigurationD. Deployment > Resource Managers > Resource Tags

Correct Answer: ASection: (none)

Explanation


QUESTION 18What is the most efficient way to terminate 1,000 instances of Business Processes (BP) from the dashboardinterface?

A. Database UsageB. Thread Process MonitorC. Business Process UsageD. Business Process Queue Usage



QUESTION 19How can a report be set to be stored on the file system?

A. Schedule a report.B. Create a new report.C. Edit an existing report.D. Change a properties file.

Correct Answer: ASection: (none)Explanation


QUESTION 20An administrator at a company wants to receive batch email notifications containing the current BusinessProcess (BP) state for BP that do not have the ompleted?or erminated?state by the time their deadline expires.The administrator asks the developer to modifythe ?ompleted?or ?erminated?state by the time their deadlineexpires. The administrator asks the developer to modify customer_overrides.properties in order to set up thebatch notifications. Which configurations will meet the administrator's requirements?

A. noapp.dbDeadLineThread=truebpdeadline.deadlinePerBP=falsebpdeadline.includeBPstate=truebpdeadline.EmailTo=siadmin@CompanyA.com

B. noapp.dbDeadLineThread=truebpdeadline.deadlinePerBP=truebpdeadline.includeBPstate=truebpdeadline.EmailTo=siadmin@CompanyA.com

C. noapp.dbDeadLineThread=truebpdeadline.deadlineBatchBP=truebpdeadline.includeBPstate=truebpdeadline.EmailTo=siadmin@CompanyA.com

D. noapp.dbDeadLineThread=truebpdeadline.deadlineBatchBP=truebpdeadline.includeBPstate=falsebpdeadline.EmailTo=siadmin@CompanyA.com



QUESTION 21A Business Process (BP) has been identified that failed due to an issue that was introduced with an externalsystem not having a file system available. The BP has OnFault logic that traps the error and sends an emailnotification. The administrator has talked with the appropriate resources and confirmed the issue has beenresolved so all future processing works as desired. To reprocess the failed BP, which two actions must beexecuted for each of the failed instances? (Choose two.)

A. RestartB. Resume

IBM 000-218 ExamC. Advanced RestartD. Terminate and ResubmitE. Interrupt and Resubmit

Correct Answer: ACSection: (none)Explanation


QUESTION 22How can a real-time overview of all the defined JDBC pools within a system be viewed?

A. ThreadsB. System StatusC. Host InformationD. Database Usage



QUESTION 23Which XPath expression references a document in process data?

A. SCIObjectIDB. PrimaryDocumentC. Document/SCIObjectIDD. PrimaryDocument/@SCIObjectID



QUESTION 24Assuming a system with configuration for tracking purchase orders as "PON", an operator needs to search foran inbound ASC X12 purchase order from a specific trading partner. Which correlation name should beselected along with the Sender ID from the Document Advanced Search?IBM 000-218 Exam

A. Name: PONValue: "actual purchase order number"

B. Name: PurchaseOrderNumberValue: "actual purchase order number"

C. Name: Purchase Order NumberValue: "actual purchase order number"

D. Name: Purchase_Order_NumberValue: "actual purchase order number"



QUESTION 25The developer has a requirement to execute multiple threads and then continue once all have been completed.Which BPML activity should be used?

A. ChoiceB. All StartC. Invoke SyncD. Produce/Consume



QUESTION 26A developer has created and deployed a LWJDBC adapter with all the setting completed. The developer hasused the following SQL in the SQL parameter UPDATE TEST SET CERT = O?WHERE CERTREVIEW = ?.parameter UPDATE TEST SET CERT = ?O?WHERE CERTREVIEW = ?. Which setting needs to be addedinto the configuration of the LWJDBC?

A. var1B. param1C. var1, vartype1D. param1, paramtype1



QUESTION 27A developer uses a dynamic value in multiple Business Processes (BP) which can change betweenenvironments of IBM Sterling B2B Integrator (SBI) using sci-get-property. Which two methods could thedeveloper use to reuse the same BP with different values in a different environment of SBI? (Choose two.)

A. Add an entry into the <sbi_root>/properties/sandbox.cfg and restart SBI.B. Create a customer properties file in <sbi_root>/properties/ and run the Cache Refresh Service.C. Add an entry into <sbi_root>/properties/customer_overrides.properties and use the Cache Refresh Service

in a BP.D. Create a custom table and use a Lightweight JDBC adapter to retrieve the data and insert it into cache

using the Cache Refresh Service.E. Use assign statements followed by the Cache Refresh Service in a BP which runs once at the startup of SBI

and can then be used by other BP.

Correct Answer: BCSection: (none)Explanation


QUESTION 28A company has implemented a Web Service (WS) in IBM Sterling B2B Integrator (SBI). The WS is usingunencrypted HTTP as transport. The SBI is deployed as a single node instance. How can this transport beconfigured to be encrypted?

A. Change the URL in the WSDL file to https://...B. Change the transport to HTTPS in WS manager.C. Change the SSL settings in SOAHttpServerAdapter.D. Check in a SSL certificate and link to it in WS manager.



QUESTION 29Given the following BPML, what will the value of "c" be in ProcessData when the Business Process (BP)completes successfully?IBM 000-218 Exam

A. 10B. 11C. 15D. 16



QUESTION 30An inbound EDI process receives X12 and EDIFACT files where the functional group can contain multiple X12transaction sets or EDIFACT messages. However, it is a requirement of the backend interface that will receivethe translated data that only one transaction or message per file is delivered to the interface. Where is thisconfigured?

A. Transaction level Document EnvelopeB. Interchange level Document EnvelopeC. Parameter in customer_overrides.properties fileD. Parameter passed to the X12Deenvelope or the EDIFACTDeenvelope service


Explanation

Explanation/Reference:IBM 000-218 Exam

Explanation:

QUESTION 31A developer is implementing onFault logic into a Business Process (BP) for error handling. Based on thefollowing BPML code:

Which error will trigger the onFault in the BP?

A. Any errorB. xPath errorC. No file in folderD. No files to collect



QUESTION 32A customer does a very large volume of outbound FTP sessions. To help facilitate the throughput and provideload-balancing and fail over support, the customer created two FTP Client Adapter instances associated withtwo Perimeter Servers deployed on two separate servers. Which feature can be used by the customer toreference the two FTP Client adapter instances by a common name in the Graphical Process Modeler (GPM)or BPML?

A. Service GroupB. Adapter GroupC. Transaction GroupD. customer_overrides



QUESTION 33IBM 000-218 ExamA developer is importing a Business Processes (BP) called ftp_CompanyA into production via ResourceManager and Object Updates is set to Yes. What happens if this BP already exists?

A. The BP is not imported.B. The BP gets renamed to ftp_CompanyA_TEMP.C. The import appends a new BP version to the list of previously saved versions, incrementing by one.

D. A backup is made of default ftp_CompanyA BP in a file called backup.xml and then it is overwritten.



QUESTION 34A company wants a Business Process (BP) to be triggered by the arrival of a file in a particular folder. Whichadapter could be set to bootstrap when a file is found?

A. File SystemB. FTP Client GetC. Lightweight JDBCD. Command Line Adapter 2



QUESTION 35A developer has been tasked with writing a communications process to connect to a partner SFTP server andget order files. Authentication of theA developer has been tasked with writing a communications process toconnect to a partner? SFTP server and get order files. Authentication of the user is being performed by a keysignature to the partner SFTP server.user is being performed by a key signature to the partner? SFTP server.Which two keys are required for establishing an SFTP session to the SFTP server? (Choose two.)

A. Known Host KeyB. Host Identity KeyC. User Identity KeyD. Remote Host KeyE. Authorized User Key

IBM 000-218 Exam



QUESTION 36In an FTP pull scenario with many trading partners, if the expected file is not available at the external FTPServer, the Business Process (BP) should reconnect and check for the file again after about 15 - 30 minutes.Which service would provide the optimal performance for the timing logic?

A. Wait serviceB. Sleep serviceC. Schedule serviceD. FTP Client Begin Adapter



QUESTION 37A developer needs to set a default value if a particular element in Process Data does not exist. Given thefollowing bpml code, what is the correct corresponding rule?

A. <rule name="IsFileSizeNotSet?"><condition>FileSize = 0</condition></rule>

B. <rule name="IsFileSizeNotSet?"><condition>FileSize.length() = 0</condition></rule>

C. <rule name="IsFileSizeNotSet?"><condition>string(/ProcessData/FileSize) = 0</condition> </rule>IBM 000-218 Exam

D. <rule name="IsFileSizeNotSet?"><condition>string-length(/ProcessData/FileSize) = 0</condition> </rule>



QUESTION 38A company needs to change the folder location for outgoing AS2 documents. Locations for inbound andoutbound file storage are configured in which area for a single organization installation?

A. RelationshipB. Partner setupC. Organization setupD. Http Server Adapter



QUESTION 39A developer needs to copy the contents of the Primary Document to Process Data before completing asubsequent step. How can this be accomplished?

A. <assign to="MyTempDocument" from="PrimaryDocument"></assign>B. <assign to="MyTempDocument">DocToDOM(PrimaryDocument)</assign>C. <assign to="MyTempDocument" from="PrimaryDocument.document()"></assign>D. <assign to="MyTempDocument" from="DocToDOM(PrimaryDocument)"></assign>



QUESTION 40A company has a new version of an active Business Process (BP). They would like to add the new .bp versionfrom the Graphical Process Modeler (GPM) to IBM Sterling B2B Integrator (SBI) and have the new version run.Which steps need to be completed to use the new version? IBM 000-218 Exam

A. Check out existing version in Source Manger.Check-in new version.Set new version to default during check-in.

B. Disable previous version.Check-in new version.Set new version to default in Execution Manager.

C. Delete previous version.Check-in new version.Set new version to default in Execution Manager.

D. Create a new Process Definition.Provide a new or varied name.Configure schedules and invokes to use new name.



QUESTION 41A developer has been tasked with creating an inbound EDI process to support ASC X12 and EDIFACT EDIstandards. A communications process has been created that retrieves the inbound EDI data on a scheduledbasis from a Value Added Network (VAN). The file retrieved from the VAN contains a mix of EDIFACT andASC X12 interchanges. Which asset is used to split the file by interchange and invoke the proper EDI standardspecific Business Process (BP) for each interchange?

A. Typing ServiceB. EDI Parser ServiceC. EDIDenveloping ServiceD. Document Extraction Service




QUESTION 42A mapping specialist is testing a map that has been created. For some reason an extended rule on an outputelement is not executed. What is the most probable reason?

A. The element is not in a group.B. There is no link to the element.C. Extended rules are not executed on the output side.

IBM 000-218 ExamD. Extended rule on the input side ran nullifying the output side.



QUESTION 43When a file arrives it must be archived. The ProcessFileArrival and ArchiveFile Business Processes (BP)handle this. The requirement is for ProcessFileArrival to invoke ArchiveFile, but not wait for ArchiveFile to finishbefore further processing. Which invoke mode should be used?

A. InlineB. AsyncC. QueuedD. Deferred



QUESTION 44A system administrator who is responsible for the maintenance of an IBM Sterling B2B Integrator (SBI)installation notices issues with the archiving of process data. Which service should run on a schedule andselect all completed or terminated Business Process (BP) data and BP for archiving or purging?

A. Purge ServiceB. Data Cleanup ServiceC. Process Data Archiving ServiceD. Index Business Process Service



QUESTION 45A developer wants to see which messages were added to a mailbox between two given dates. Which serviceshould be used in a Business Process (BP)? IBM 000-218 Exam

A. Mailbox List ServiceB. Mailbox Add ServiceC. Mailbox Query ServiceD. Mailbox Search Service



QUESTION 46A system developer wants to change the tracking discovery level for some Business Processes (BP). Thedeveloper is doing this by changing the global tracking.discovery parameter in the doc_tracking.properties filesfrom NONE to MANDATORY. What are two side effects with this selected alternative? (Choose two.)

A. It affects the tracking discovery level on all BP.B. It can have a serious impact on system performance.C. Customer override properties files will not override this.D. The doc_tracking.properties is generated from sandbox.cfg.E. The functionality will be changed in the future and doc_tracking.properties removed.

Correct Answer: ABSection: (none)Explanation


QUESTION 47A developer has been tasked with configuring IBM Sterling B2B Integrator (SBI) to accept FTP sessions usingSSL from a partner FTP client for theA developer has been tasked with configuring IBM Sterling B2B Integrator(SBI) to accept FTP sessions using SSL from a partner? FTP client for the purpose of allowing the partner topull invoice documents from their SBI Mailbox. The requirement is that only server side SSL authentication beused. Which certificate store must be referenced when configuring the FTP Server adapter?

A. TrustedB. SystemC. Host IdentityD. CA Certificate



QUESTION 48A developer is creating an IBM Sterling B2B Integrator (SBI) Business Process (BP) using the GraphicalProcess Modeler (GPM). A Mailbox Delete service is being used to delete a specific message from a mailbox.The developer is assigning the parameter MessageId to delete in the name-value pair in the Service Editor.There are other services being used in the BP that create the XML tag MessageId in Process Data. Whichmessage mode in the GPM Service Editor will be required to ensure that the value of MessageId set in theService Editor will be used?

A. Message from ServiceInput Msg tab: Allow Message Write

B. Message from ServiceInput Msg tab: Allow Process Data Write

C. Message to ServiceOutput Msg tab: Obtain Message First, then Process Data

D. Message to ServiceOutput Msg tab: Obtain Process Data First, then Messages



QUESTION 49The Clean-Up processes monitor available in the troubleshooter screen identifies all the system clean upprocesses along with status, work flow ID and last time each process was run. What are three of the requiredsystem processes that need to be run on a regular schedule? (Choose three.)

A. Schedule_PurgeServiceB. Schedule_BackupServiceC. Schedule_AFTPurgeServiceD. Schedule_FileCleanUpServiceE. Schedule_MailboxRemovalServiceF. Schedule_IndexBusinessProcessService

Correct Answer: ABFSection: (none)Explanation


QUESTION 50While gracefully stopping the system in a controlled manner, IBM Sterling B2B Integrator (SBI) has the ability tocontrol the completion of which type of queued items on the local node?

A. FIFO messagesB. Mailbox messagesC. ActiveMQ messages

D. Business Processes (BP)



QUESTION 51A company is onboarding a new group of trading partners with high volumes and is expecting increasedinteraction between IBM Sterling B2B Integrator (SBI) and the database. What is one thing that should be doneto efficiently handle the increased database interaction?

A. Create a Service Group of database connections.B. Create additional Lightweight JDBC Service configurations.C. Increase the maximum connections in the connection pool.D. Increase the maximum connections in the Lightweight JDBC Service configuration.



QUESTION 52For increased availability reasons, a two-node application cluster has been multi-homed with each node havingtwo network adapters cards. The system needs to be enabled to accept inbound FTP or FTP SSL clientconnection on port 25000. The system will use a wildcard (*) default in the perimeter server. How many FTPserver adapters need to be configured to support ACTIVE and PASSIVE user initiated seasons?

A. 2B. 4C. 8D. 16



Topic 2, Volume B

QUESTION 53A customer has moved the IBM Sterling B2B Integrator (SBI) database server to a new ipaddress/hostnameand needs to make the changes to SBI so that it can connect to the new server. Which procedures should befollowed?

A. Edit <sbi_install>/properties/sandbox.cfg and change all old database ipaddress/hostname to the new one,save and run setupfiles.sh.

B. Edit <sbi_install>/properties/jdbc.properties.in and change all old database ipaddress/hostname to the newone, save and run setupfiles.sh.

C. Edit <sbi_install>/properties/jdbc.properties and change all old database ipaddress/hostname to the newone, save and run setupfiles.sh.

D. Edit <sbi_install>/properties/jdbc_customer.properties.in and add all database pools into this file with newipaddress/hostname, save and runsetupfiles.sh.



QUESTION 54When switching between editing a Business Process (BP) in the Graphical Process Modeler (GPM) and thetext editor, some meta data is lost. What meta data will be retained regardless of the switch?

A. BP execution settingsB. graphical layout of the BPC. custom name set on services/adaptersD. annotations (comments) on services/adapters



QUESTION 55Where are two places the amount of time a Business Process (BP) remains online in the system IBM 000-218Examcan be updated? (Choose two.)

A. Archive ManagerB. archive.propertiesC. Business Process EditorD. Performance Tuning WizardE. Retention Service configuration



QUESTION 56A company has installed a larger drive on their IBM Sterling B2B Integrator (SBI) server and want to change thelocation of their archived data to this new drive. Where is the default directory for archive data set?

A. Archive ManagerB. Performance Tuning UtilityC. Archive Service ConfigurationD. customer_overrides.properties



QUESTION 57A global persistence level is set to PERSISTENCE_NONE. Which Business Process (BP) persistence settingswill result in more information being persisted?

A. System DefaultB. Step Status OnlyC. Step Status - Engine May OverrideD. BP Start Stop - Engine May Override



QUESTION 58A company allows HTTP communication from trading partners. What must be configured on the HTTP Serveradapter to allow a Business Process (BP) to be invoked to handle incoming HTTP requests?

A. URIB. WAR fileC. Input schemaD. CA Certificate



QUESTION 59A developer is implementing onFault logic into a Business Process (BP) for error handling. Given the followingBPML code containing two onFaults:

How will the onFault execute for the error "XML failed validation"?

A. Execute both faults.

B. Execute neither fault.C. Execute the first fault.D. Execute the second fault.



QUESTION 60A developer has been asked to create an EDI process for generating outbound ASC X12 invoices, purchaseorder acknowledgments, and advanced ship notices for a number of partners. All transaction types aregenerated by the application systems and processed by IBM Sterling B2B IBM 000-218 ExamIntegrator (SBI) throughout the day. The requirement is that certain outbound EDI transactions or partners betranslated and enveloped immediately while others are deferred such that they are translated and envelopedonly at specific times. Which asset can be scheduled to implement the deferred processing?

A. X12Envelope ServiceB. EDI Envelope ServiceC. Document Extraction ServiceD. X12EnvelopeUnified Business Process (BP)



QUESTION 61A customer is setting up a new EDI trading partner that uses the ASC X12 standard. The trading partner will besending inbound purchase orders to the customer and expects to receive Functional Acknowledgments (ASCX12 997) transactions in return with Transaction Level acknowledgment detail. Where does the customerenable the outbound Functional Acknowledgments to the trading partner?

A. Set level Inbound Document EnvelopeB. Group level Inbound Document EnvelopeC. Interchange level Inbound Document EnvelopeD. Parameter to X12Deenvelope service in the X12DeenvelopeUnified Business Process (BP)



QUESTION 62A company needs to call an executable program on a remote server. Which service or adapter can beconfigured to work with remote systems?

A. Remote Server AdapterB. Command Line Adapter 2C. Execution Control Service

D. Encoding Conversion Service


Explanation/Reference:IBM 000-218 Exam

Explanation:

QUESTION 63A developer has been tasked with configuring IBM Sterling B2B Integrator (SBI) to initiate FTP sessions usingSSL to a partner FTP/S server for theA developer has been tasked with configuring IBM Sterling B2B Integrator(SBI) to initiate FTP sessions using SSL to a partner? FTP/S server for the purpose getting order files from thepartner. The requirement is that both Client and Server Authentication be performed. Which two certificatestores must be configured for selection when configuring this FTP over SSL client communications? (Choosetwo.)

A. CA CertificateB. Trusted CertificateC. System CertificateD. Self-Signed CertificateE. Host Identity Certificate



QUESTION 64A developer is using a Doc Keyword Replace Service to replace an @ with a ~ in an EDI file inside theGraphical Process Modeler (GPM). The base configuration does not have settings for the keyword and replacesettings. Where in the GPM can the developer add service settings into the BPML?

A. View Menu > SourceB. Service Editor > AdvancedC. Tools Menu > Source ManagerD. Not able to add in GPM, must add in the text editor.



QUESTION 65A mailbox is created for an end user called /partner/orders/TPA_inbound. When the end user IBM 000-218Examconnects, the end user can only see /TPA_inbound mailbox from root. What has happened?

A. A virtual root has been created on /partner/orders for that SBI userid.B. The end user has been assigned /TPA_inbound permissions for the mailbox.

C. Mailbox permission rights have been changed to VIEW for /partner/orders/TPA_inbound.D. Another mailbox was created called /partner/orders/TPB_inbound which the user is not allowed to access.



QUESTION 66A 2-node IBM Sterling B2B Integrator (SBI) clustered solution is being designed. The customer will initiateconnections with external partners using HTTP, FTP and SFTP protocols. For load balancing and fail overpurposes 2 client adapters for each protocol are configured on each node and Service Groups are being used.How many Service Groups will be required?

A. 1B. 2C. 3D. 6



QUESTION 67A developer needs to export all versions of a Business Processes (BP). Which two formats can be selectedwithin Resource Manager for exporting objects from IBM Sterling B2B Integrator (SBI)? (Choose two.)

A. WAR File (.war)B. Install Bundle (.jar)C. Text Document (.txt)D. XML Document (.xml)E. Compressed file (.zip)

Correct Answer: BDSection: (none)Explanation


QUESTION 68The following BPML code describes a choice that takes place:

What are the activity values referring to?

A. BPML sequencesB. assign statement valuesC. elements in Process DataD. results from rule evaluation



QUESTION 69A mapping specialist is creating a map to transform data from an incoming EDI document to an internal XMLformat. The internal XML format requires a customer ID which is not available in the EDI document. It needs tobe retrieved from the Business Process (BP) executing the map. How can the mapping specialist include thecustomer ID in the map?

A. Use standard rule Select.B. Use extended rule getFromProcessData.C. Specify XPath on the segment's Properties > Business Process Data.D. Add a temporary structure on the input side and map to Process Data.



QUESTION 70When editing a Business Process (BP), a developer checks the Document Tracking check box.IBM 000-218 Exam

What functionality will this action enable?

A. The document tracking data will be available in document_tracking.log.B. The document will be visible in Business Processes > Monitor > Current Documents.C. The document meta information will be available in process data when the BP executes.D. The document will be archived in an external archive configured in doc_tracking.properties.



QUESTION 71An analyst is responsible for implementing an AS2 solution for their company using IBM Sterling B2B Integrator(SBI). After certificates and connections information have been gathered, what is the first thing that must becreated in the system?

A. PartnersB. Code ListC. RelationshipD. Organization



QUESTION 72A developer has been tasked with configuring IBM Sterling B2B Integrator (SBI) to accept SFTP sessions froma partner SFTP client for the purposeA developer has been tasked with configuring IBM 000-218 ExamIBM Sterling B2B Integrator (SBI) to accept SFTP sessions from a partner? SFTP client for the purpose ofallowing the partner to pull invoice documents from their Mailbox. The SFTP session initiated by the partner willbe authenticated by a key signature to the SBI SFTP server. Which two keys are required to be configured inSBI for the establishment of the SFTP session? (Choose two.)

A. Known Host KeyB. Host Identity KeyC. User Identity KeyD. Remote Host KeyE. Authorized User Key

Correct Answer: BESection: (none)Explanation


QUESTION 73In an order process, three JDBC queries need to be executed against three separate databases:1. Decrease inventory by the ordered volume to reserve inventory (in the inventory database) 2. Check thecustomer credit limit in a table (in the customer database) 3. Insert the order details in the order table (in the

order database) If, for example, the credit limit check fails, the inventory needs to be restored. Which servicecan be of help in this situation?

A. End Transaction ServiceB. Lightweight JDBC AdapterC. Rollback Database ServiceD. Restore Business Process Service



QUESTION 74A developer has created and deployed a LWJDBC adapter with only result_name and row_name defined. Thedeveloper has opened the configuration setting for this LWJDBC in the Graphic Process Modeler (GPM) andput this into the SQL parameter SELECT * FROM CERTTEST WHERE TEST = O? ?O? Which otherparameters need to be configured?

A. pool, param1B. querytype, pool

IBM 000-218 ExamC. dbuser, dbpasswordD. param1, paramtype1, QueryType



QUESTION 75A developer has created two FTP Client adapters 'FtpClient1' and 'FtpClient2' and placed them in the'FtpClientGroup' Service Group. What is the proper way to invoke these adapters in a clustered environment toallow for maximum availability?

A. <operation name="FTP Client Begin Session Service"><participant name="FTPClientBeginSession"/><output message="FTPClientBeginSessionServiceTypeInputMessage"> <assignto="ServiceGroup">FtpClientGroup</assign><assign to="." from="*"></assign></output><input message="inmsg"><assign to="FTPSessionResults" from="*"></assign></input></operation>

B. <operation name="FTP Client Begin Session Service"><participant name="FTPClientBeginSession"/><output message="FTPClientBeginSessionServiceTypeInputMessage"> <assignto="FTPClientAdapter">FtpClient1 | FtpClient2</assign> <assign to="." from="*"></assign></output><input message="inmsg"><assign to="FTPSessionResults" from="*"></assign></input>

</operation>C. <operation name="FTP Client Begin Session Service">

<participant name="FTPClientBeginSession"/><output message="FTPClientBeginSessionServiceTypeInputMessage"> <assignto="FTPClientAdapter">FtpClientGroup</assign> <assign to="." from="*"></assign></output><input message="inmsg"><assign to="FTPSessionResults" from="*"></assign></input></operation>

D. <operation name="FTP Client Begin Session Service">D. <operation name="FTP Client Begin SessionService">IBM 000-218 Exam<participant name="FTPClientBeginSession"/><output message="FTPClientBeginSessionServiceTypeInputMessage"> <assignto="FTPClientAdapter">FtpClient1</assign> <assign to="FTPClientAdapter">FtpClient1</assign><assign to="FTPClientAdapter">FtpClient2</assign><assign to="." from="*"></assign></output><input message="inmsg"><assign to="FTPSessionResults" from="*"></assign></input></operation>



QUESTION 76When implementing a Web Service (WS), a company creates an XSD to specify and validate the WS input.The schema is checked in to IBM Sterling B2B Integrator (SBI). What needs to be done to connect the schemato the WS?

A. Specify the schema in the WS Manager.B. Create a schema mapping to a Business Process (BP).C. Use the XML Validation Service and specify the schema.D. Nothing needs to be done because the namespace specified in the XSD is sufficient.



QUESTION 77A file must be translated and then sent via FTP. The TranslateFile and SendFTP Business Processes (BP)handle this. In the event of a failure in SendFTP, the file must be able to be resent without translating the fileagain. What is the most appropriate invoke mode for TranslateFile to call SendFTP?

A. InlineB. DirectC. AsyncD. Embedded

IBM 000-218 Exam



QUESTION 78Given the following BPML, what will the value of "c" be in ProcessData when the Business Process (BP)completes successfully?

A. 10B. 11C. 15C.15D. 16D.16



QUESTION 79IBM 000-218 ExamA system developer is involved in a project to onboard one trading partner. The trading partner is usingEDIFACT. The system developer is required to setup a Business Process (BP) to process the EDIFACTdocuments arriving in a mailbox. Which out-of-the-box BP can be used for this purpose?

A. EDIEnvelopeB. EDIINTParseC. EDIDeenvelopeD. EDIInboundMailboxExtraction



QUESTION 80A customer properties file called test.properties has the following entries:

ABCD = 1234

test = ABCD

What is the correct way to get the value of the ABCD property into process data VAR1?

A. <assign to="VAR1" from="sci-get-property('1234', 'test')"></assign>B. <assign to="VAR1" from="sci-get-property('test', '1234')"></assign>C. <assign to="VAR1" from="sci-get-property('ABCD, 'test')"></assign>D. <assign to="VAR1" from="sci-get-property('test', 'ABCD')"></assign>



QUESTION 81A developer is testing an IBM Sterling B2B Integrator (SBI) Business Process (BP) that was created using theGraphical Process Modeler (GPM). The developer is attempting to extract the Primary Document contained inProcess Data to a file system folder using a File System Adapter (FSA). In the File System Adapter ServiceEditor and/or Service Configuration the developer has assigned values to the parameters for the Action(Extract), extraction folder and for the file name to name the extracted file. However, the process is failing at theFSA with an error indicating that the Primary Document is null or doesn exist.Document is null or doesn? exist.The developer has verified that the Primary Document does exist. What is the most likely cause of the error?IBM 000-218 Exam

A. File System adapter Service Editor tab Message to Service Output Msg set to Messages OnlyB. File System adapter Service Editor tab Message from Service Input Msg set to Allow Message WriteC. File System adapter Service Editor tab Message from Service Input Msg set to Allow Process Data WriteD. File System adapter Service Editor tab Message to Service Output Msg set to Obtain Message First, then

Process DataE. File System adapter Service Editor tab Message to Service Output Msg set to Obtain Process Data First,

then Messages



QUESTION 82A developer needs to check if the 'Preprocess' element equals 'Y' in Process Data. Which statement is mostefficient?

A. INPUT/Header/Preprocess = 'Y'B. string(INPUT/Header/Preprocess) = 'Y'C. string(//INPUT/Header/Preprocess) = 'Y'D. //ProcessData/INPUT/Header/Preprocess/text() = 'Y'



QUESTION 83Which Business Process (BP) check in option must be set to enable tracking of documents to be seen in the"Current Documents" details list?

A. Enable TransactionB. Document TrackingC. Set the Event Reporting Level to: FullD. Set the Document Storage to: Inherited



QUESTION 84Under which report section can a report be set to be emailed at a set interval?

A. CalendarB. ScheduleC. Report typesD. Create a new report



QUESTION 85Where in the dashboard interface can multiple adapter service configurations be enabled or disabled on onescreen?

A. Current ActivityB. Adapter UtilitiesC. System TroubleshooterD. Business Process Manager



QUESTION 86Assuming a generic system with no special deployment configuration, an operator needs to search for aninbound EDIFACT purchase order from a specific trading partner. Which correlation name should be selectedalong with the Sender ID from the Document Advanced Search?

A. Name: SenderTransaction Sender ID : EDITransactionValue: Equals ORDERS

B. Name: TransactionSetIDTransaction Set ID : EDIValue: Equals ORDERS

C. Name: SenderIDQualifierSender ID Qualifier : EDIGroupValue: Equals ORDERS

D. Name: TransactionSenderIDQualifierIBM 000-218 ExamTransactions Sender ID Qualifier : EDIValue: Equals ORDERS



QUESTION 87Which option shuts down a system and ensures that currently running processes complete prior to termination?

A. Soft StopB. Host InformationC. Quiesce SystemD. Stop the System


Explanation


QUESTION 88A Business Process (BP) has been identified that failed due to an issue with the Lightweight JDBC adapterusing a database that is unavailable. The database has been made available again. The BP has no built inOnFault logic. To reprocess the failed BP, which action to be executed is the most efficient for each of the failedinstances?

A. RestartB. ResumeC. Advanced RestartD. Terminate and Resubmit



QUESTION 89A company has many CA certificates in their IBM Sterling B2B Integrator (SBI). The company's SBIadministrator is responsible for contacting the Certificate Authorities for certificate renewal before they expire.Recently the company decides to have their security administrator perform the IBM 000-218 Examjob instead, and requires automated notification be sent to the security administrator 30 days prior to acertificate's expiration date. What is the most effective way to configure SBI to meet the requirements?

A. Add the security administrator's email to all certificates management.B. Add the security administrator to the SBI administrator email distribution list.C. In the security.properties file, set emailRecipients = <security admin's email address>.D. Create a Business Process (BP) to check all certificate expire dates and send notification accordingly.E. Set "Expire Days" to 30 in Check Expire Service configuration, set "Output method" to Email, and input the

security administrator's emailaddress.

Correct Answer: ESection: (none)Explanation


QUESTION 90A client is experiencing failed Business Processes (BP) due to a resource group not having an active adapteravailable. Which menu path identifies the adapters that are disabled?

A. Operations > Thread MonitorB. Operations > Support Tools > Support CaseC. Deployment > Services > Configuration > ListD. Deployment > Services > Installation > Setup

Correct Answer: CSection: (none)

Explanation


QUESTION 91Which three areas in IBM Sterling B2B Integrator (SBI) are automatically cleaned up? (Choose three.)

A. Map definitionsB. Correlation dataC. Mailbox messagesD. Business Process (BP) definitionsE. BP instance dataF. archived data files on the file system

IBM 000-218 Exam

Correct Answer: BCESection: (none)Explanation


QUESTION 92A company increased the number of CPUs allocated to IBM Sterling B2B Integrator (SBI). What should bedone to take advantage of this increased processing capacity?

A. Increase the Cache Size.B. Increase the Global Threads.C. Increase the Initial Heap Size.D. Add additional Perimeter Servers.



QUESTION 93To allow existing AS2 communications to complete, which Drain Queues option must be selected whengracefully stopping an IBM Sterling B2B Integrator (SBI) system in a controlled manner?

A. Drain No BPsB. Drain ALL BPsC. Drain Not Started BPsD. Drain Not Started BPs and No Open Session BPs



QUESTION 94A customer has deployed a two node active-active IBM Sterling B2B Integrator (SBI) cluster in the secure zoneon two servers. The customer has installed two servers in the DMZ for the purpose of installing remote SBIPerimeter Servers to facilitate communications with external partners. Each server in the DMZ is multi-homed(two external facing NIC cards with two external IP addresses and one internal facing NIC card) to two differentexternal facing network segments for redundancy in case one network segment fails or a NIC card fails.External partners will connect to an external IP Load Balancer that will distribute inbound FTP/S, SFTP andHTTP Client sessions IBM 000-218 Examacross the Perimeter Servers. The Perimeter Servers will be installed without using wildcard addresses. Thecustomer requirement is that if any single server fails and oneServers. The Perimeter Servers will be installedwithout using wildcard addresses. The customer? requirement is that if any single server fails and one of thetwo external facing network segments fail, all the other SBI nodes and remote Perimeter Server instances mustcontinue to actively handle inbound sessions for each protocol. What is the minimum number of remotePerimeter Server instances that must be deployed in the DMZ?

A. 4B. 6C. 8D. 12



QUESTION 95Which two items can help reduce the size of process data and increase performance? (Choose two.)

A. Purge ServiceB. Release ServiceC. message_to_childD. JVM Max Heap sizeE. Compression Service

Correct Answer: BCSection: (none)Explanation


QUESTION 96A company would like to maintain communication adapter availability in the event of IBM Sterling B2B Integrator(SBI) being shut down for maintenance. What can be deployed to maintain adapter communications?

A. Service GroupB. Clustered NodeC. Perimeter ServerD. Adapter Container JVM

IBM 000-218 Exam



QUESTION 97For increased availability reasons, a two-node application cluster has two servers in the DMZ. Each DMZ serverhas two network adapters. The system needs to be enabled to accept inbound FTP or FTP SSL clientconnections on port 25000 and 26000. A wildcard (*) is not used in the Perimeter Server. How many FTPServer adapters need to be configured to support ACTIVE and PASSIVE user initiated sessions?

A. 2B. 4C. 8D. 16



QUESTION 98A developer has set up a File System Adapter to monitor a specific folder on the file system. When a file arrivesin the folder, a Business Process (BP) will be executed. Where will the file payload be available to the rest ofthe BP?

A. Primary DataB. Process DataC. Primary DocumentD. Process Document



QUESTION 99The security administrator configures a user to be authenticated with a LDAP server instead of the IBM SterlingB2B Integrator (SBI) user database. Where is the LDAP Host configured? IBM 000-218 Exam

A. in the ui.properties fileB. in the security.properties fileC. in the authentication_policy.properties fileD. in the SBI dashboard under Operations > LDAP Servers



QUESTION 100

An information security department is trying to coordinate duties between various organization to increasesecurity. What are three supported security features that will increase security? (Choose three.)

A. FTP Client and Server Adapters for transmissionB. authentication integrated with external certificate repositoriesC. support for AUTACK authentication messages for EDIFACT transactionsD. Cyber Security Operations Center (CSOC) Comprehensive Cyber Threat Detection and ResponseE. Controlled Substances Ordering System (CSOS) to permit electronic transmission of orders for controlled

substancesF. Perimeter server, with a reverse proxy in the DMZ for managing protocols and ensuring firewall security

from the outside

Correct Answer: BCFSection: (none)Explanation


QUESTION 101A company has deployed a new SFTP Server adapter. What needs to be added to IBM Sterling B2B Integrator(SBI) to provide server authentication for this adapter?

A. CA CertificateB. User Identity KeyC. System CertificateD. SSH Host Identity Key



QUESTION 102A company requires all data at rest to be stored securely. How can this be configured in IBM Sterling B2BIntegrator (SBI)?

A. Import a System Certificate.B. Create a PGP Server Profile.C. Enable Document Encryption.D. Configure an Obscure Data service.



QUESTION 103A new IBM Sterling B2B Integrator (SBI) system is being designed for a client. The client will use a mix ofdocument storage types. To ensure the system stores all data in encrypted format, which security parametermust be set for this deployment?

A. security.CERT_NAME=doccryptoB. security.ENC_DECR_DOCS=NONEC. security.ENC_DECR_DOCS=ENC_FSD. security.ENC_DECR_DOCS=ENC_DBE. security.ENC_DECR_DOCS=ENC_ALL

Correct Answer: ESection: (none)Explanation

Explanation/Reference:

QUESTION 104A developer has created a new Business Process (BP) and needs to physically check the BP into the systemwith the document storage type specifically set.

What are three supported modes of document storage?

A. UserB. QueueC. SharedD. InheritedE. DatabaseF. File System

Correct Answer: DEFSection: (none)Explanation

Explanation/Reference:


IBM.Actualtests.000-218.v2012-02-17.by.sindhu company has set up an adapter Container JVM to...

Documents

Transcript of IBM.Actualtests.000-218.v2012-02-17.by.sindhu company has set up an adapter Container JVM to...