IBM WMB V7.0, System Admin By Dhruv · 2019-11-02 · Version 6.0 to WebSphere Message Broker...

IBM WMB V7.0, System Admin By Dhruv

Number: 000-184Passing Score: 800Time Limit: 120 minFile Version: 1.0

http://www.gratisexam.com/

Exam : 000-184

Title : IBM WebSphere Message Broker V7.0, System Administration

All the Best.....

-Kalyankumar.K

Exam A

QUESTION 1An administrator has installed WebSphere Message Broker Toolkit V7.0 on a production system which has anexisting implementation of WebSphere Message Broker V6.1. How should the administrator use theWebSphere Message Broker Toolkit V7.0 to administer WebSphere Message Broker 7.0 and WebSphereMessage Broker V6.1?

A. Use the WebSphere Message Broker Toolkit V7.0 to adopt the V6.1 brokers.B. Use the WebSphere Message Broker Toolkit V7.0 to connect to the WebSphere Message Broker V6.1.C. Install SupportPac I097 to achieve unified administration through the WebSphere Message Broker Toolkit

V7.0.D. Administration of WebSphere Message Broker V6.1 is not supported through WebSphere Message Broker

Toolkit V7.0.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 2A company has legacy and modern applications co-existing in their enterprise environment. The legacyapplication requires business messages in COMMAREA formats while the modern application requires XMLformat for processing. There is a need for their web application to interact with legacy and modern applicationto process a transaction. What is the recommended way for implementing the desired solution?

A. Split the business use case to two different transactions each invoking one target component.B. Invoke the modern application on XML format request then process the legacy application request.C. Implement two different format request invocation from the application to the target components.D. Implement WebSphere Message Broker and route the request on specified formats to the target

components.



QUESTION 3An administrator has been asked to prepare the environment for migration of WebSphere Message BrokerVersion 6.0 to WebSphere Message Broker Version 7.0. What steps does the administrator need to perform toprepare the environment for migration? Upgrade the WebSphere Message Broker Version 6.0 to use:

A. WebSphere MQ Version 7.0.0 before migration, upgrade WebSphere Message Broker runtime to Fix Pack9 (Version 6.0.0.9) or later, upgrade WebSphere Message Broker toolkit to 6.0.2 or later.

B. WebSphere MQ Version 7.0.1 before migration, upgrade WebSphere Message Broker runtime to Fix Pack7 (Version 6.0.0.7) or later, upgrade WebSphere Message Broker toolkit to 6.0.2 or later.

C. WebSphere MQ Version 7.0.1 before migration, upgrade WebSphere Message Broker runtime to Fix Pack9 (Version 6.0.0.9) or later, upgrade WebSphere Message Broker toolkit to 6.0.2 or later.

D. WebSphere MQ Version 6.0.2.10 before migration, upgrade WebSphere Message Broker runtime to FixPack 7 (Version 6.0.0.7) or later, upgrade WebSphere Message Broker toolkit to 6.0.2 or later.

Correct Answer: C

Section: (none)Explanation


QUESTION 4A company has a central server, which stores the catalogue price of everything that the company sells. Thisinformation is required by all Point of Sale (PoS) terminals in all the stores, and each PoS terminal must benotified of any price change. The PoS terminals connect to the central server through TCP/IP and wait for anyprice changes. The server sends any price changes to all connected client applications. The company hasfuture plans to include other types of PoS clients which uses WebSphere MQ protocol to interact with thecentral server. How should the system be implemented?

A. Implement protocol conversion on the application code.B. Implement protocol transformation engines at request entry point.C. Implement WebSphere Message Broker with TCP/IP and WebSphere MQ Adapters.D. Implement WebSphere Message Broker to support other request protocols like WebSphere MQ.



QUESTION 5An administrator has installed WebSphere Message Broker V7.0 on a production system which has an existingimplementation of WebSphere Message Broker V6.1. The administrator already has an Administration API(CMP API) script for monitoring the deployed resources on V6.1. What is the option that the administrator canuse to monitor the deployed resources for WebSphere Message Broker V7.0?

A. Install SupportPac I098.B. Reuse the existing Administration API script.C. Update the CLASSPATH to add new API JARs.D. Update the existing Administration API script to remove deprecated API calls.

Correct Answer: BSection: (none)Explanation


QUESTION 6An administrator has been asked to do capacity planning for the implementation of WebSphere MessageBroker on an already existing system where other enterprise applications are running. What is therecommended approach for sizing?


A. Analyze the current capacity sizing on the systemB. Implement WebSphere Message Broker and add 1GB RAM in current production.C. Implement WebSphere Message Broker on the production so the capacity planning can be done.D. Vertically scale the system by adding CPU, RAM & disk space if needed for Message Broker

implementation.E. Generate the capacity planning report via the capacity planning for a given topology feature in WebSphere

Message Broker.

Correct Answer: ADSection: (none)Explanation


QUESTION 7An administrator has backed up a broker on AIX using the command mqsibackupbroker. After the broker isrestored on a new machine, which one of the following tasks must be completed?

A. Restore JAR files that were deployed in BAR files.B. Restore the configurable services that were defined.C. Restore the necessary MQ queues for message flows.D. Restore the /var/mqsi/components/<broker> file system.

Correct Answer: CSection: (none)Explanation


QUESTION 8A message flow Flow1 is running on execution group EG1 on the broker BRK1. As per the businessrequirement, the flow accesses the database for transformation and routing. The user ID and password used bythe flow need to be changed to adhere to the company's new policy for user IDs and passwords. Theadministrator has been asked to change the user ID and password for the given message flow without affectingother flows. The administrator is using the mqsisetdbparms command to set the user ID and password. Whichcommand should the administrator use next?

A. mqsistart BRK1B. mqsireload BRK1 -e EG1C. mqsistartmsgflow BRK1 -e EG1 -m Flow1D. mqsistopmsgflow BRK1 -e EG1 -m Flow1



QUESTION 9A broker administrator needs to verify the number of message flows that are running or will start to run withineach execution group in a running broker. Which detail level should be specified for mqsilist BRK1 -d?

A. 0

B. 1C. 2D. 3



QUESTION 10An administrator has backed up the broker using the command mqsibackupbroker. The command was issuedwhile the broker was running and processing deployments. What is the outcome?

A. The command completes successfully as normal.B. The backup file contains incomplete information and is unusable.C. The command does not complete until deployments are complete.D. An error message was issued indicating the broker was in use.



QUESTION 11An administrator needs to modify the JVM Heap Size property that is associated with an execution group.Which command should the administrator execute?

A. mqsichangebrokerB. mqsichangepropertiesC. mqsichangeexecutiongroupD. mqsicreateexecutiongroup



QUESTION 12An administrator is asked to set up administration security for an existing broker, so that only authorized userscan perform administrative tasks against the broker and its resources. What command does the administratorneed to run?

A. mqsisetsecurityB. mqsichangebrokerC. mqsicreateaclentryD. mqsichangeproperties

Correct Answer: BSection: (none)

Explanation


QUESTION 13An administrator needs to group several brokers into a Broker Set to make it easier to manage them from asingle WebSphere Message Broker Explorer workspace. The administrator creates an Automatic Broker Setusing the filter brokerEnvironment:Production. Which of the following steps does the administrator need toperform in WebSphere Message Broker Explorer to ensure the correct brokers are in this Broker Set?

A. Drag and drop the correct brokers onto the Broker Set.B. Manually change the Properties of the correct brokers.C. Manually change the Broker Tags of the correct brokers.D. Define the properties of the filter to select brokers by the correct name.

Answer:



QUESTION 14An administrator needs to administer a broker on a Windows platform through the Administration API exerciser.How can the administrator start the exerciser?

A. Set the mqsiclasspath and then invoke ConfigManagerProxy.shB. Invoke the shell script install_dir/sample/ConfigManagerProxy/StartConfigManagerProxyExerciserC. Run the shell script install_dir\sample\ConfigManagerProxy\StartConfigManagerProxyExerciser from a

WebSphere Message Broker Command Console.D. Put a .bat script install_dir/sample/ConfigMangerProxy/StartConfigManagerProxyExerciser which can

include the broker environment and start the Configuration Manager.



QUESTION 15An administrator needs to install service updates to the WebSphere Message Broker V 7.0 toolkit. What shouldthe administrator use to do this?

A. IBM Support CenterB. IBM Software SupportC. IBM Support AssistantD. IBM Installation Manager



QUESTION 16A developer is defining properties on a node or message flow. The administrator has option to create theconfigurable services so that the message flow can refer to them to find properties at run-time. How can theadministrator define the configurable services?

A. Use the Command Line Interface (CLI) to issue the mqsichangeproperties command.B. Use the CLI to issue the mqsichangeconfigurableservice command.C. Use the CLI to issue the mqsicreateconfigurableservice command.D. Use the CLI to issue the mqsideleteconfigurableservice command.E. Use the WebSphere Message Broker Explorer to create and import configurable services.

Correct Answer: CESection: (none)Explanation


QUESTION 17An administrator has been notified that a new flow has to be deployed in production and needs to be configuredfor high throughput. The MQ messages that would get processed are of less than 1K in size, non-persistentand independent of each other. Which option can the administrator apply to increase throughput with the leastadministrative overhead?

A. Create a new broker that would process messages exclusively for this queue.B. Create two new execution groups and deploy the flow in each of the execution group.C. Change the Additional Instances parameter to 300 in the broker archive file and deploy.D. Increase the commit count to 20 and Additional Instances parameter to 20 in the broker archive file and

deploy.



QUESTION 18A company faces issues with their production system. The broker is throwing intermittent errors significantlyaffecting the business. The administrator is asked to raise a Problem Management Record (PMR) for the issue.What should be the severity of PMR raised by the administrator?

A. Severity 1B. Severity 2C. Severity 3D. Severity 4



QUESTION 19An administrator needs to start all the message flows deployed on the execution group EG1 on the brokerBRK1 without affecting other execution groups. What command does the administrator need to execute?

A. mqsistartmsgflow BRK1 -g -jB. mqsistartmsgflow BRK1 -g -m Flow1C. mqsistartmsgflow BRK1 -e EG1 -jD. mqsistartmsgflow BRK1 -e EG1 -m Flow1



QUESTION 20A BAR file Solutionv1.bar has been deployed. A developer created a BAR file Solutionv2.bar to meet newbusiness requirements, and asked the administrator to deploy it. The content of these BAR files is listed below.Content of the file Solutionv1.bar: MsgFlow1.cmf MsgFlow2.cmf MsgSet1.dictionary MsgSet2.dictionaryContent of the file Solutionv2.bar: MsgFlow1New.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet3.dictionaryThe administrator performed a successful complete deployment to an execution group. What artifacts are in theexecution group?

A. MsgFlow1New.cmfMsgFlow3.cmf MsgSet1.dictionaryMsgSet3.dictionary

B. MsgFlow1.cmfMsgFlow2.cmf MsgSet1.dictionary MsgSet2.dictionary

C. MsgFlow1New.cmf MsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet2.dictionary MsgSet3.dictionary

D. MsgFlow1.cmf MsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet2.dictionary MsgSet3.dictionary

E. MsgFlow1.cmf MsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet2.dictionary MsgSet3.dictionary

F. MsgFlow1.cmf MsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet2.dictionary MsgSet3.dictionary

G. MsgFlow1.cmf

MsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet2.dictionary MsgSet3.dictionary

Correct Answer: ASection: (none)Explanation


QUESTION 21An application developer configures message flow MF to generate monitoring events and deploys it onexecution group EG of broker BRK. The application developer creates a new subscription to listen to eventmessages being generated for MF on a specific queue MF.SUB.QUEUE. The administrator later gets notifiedthat there are no event messages being generated on MF.SUB.QUEUE even though messages are beingprocessed by the flow MF. What command does the administrator need to run to enable MF to generate theevents?

A. mqsichangebroker BRK -e MON_EVENTS -v enableB. mqsichangeflowmonitoring BRK -c active -e EG -f MFC. mqsireportflowstats BRK -a -e EG -f MF -q MF.SUB.QUEUED. mqsichangeproperties BRK -e EG -f MF -n MON_EVENTS -v enable



QUESTION 22A message flow without sequence requirement is deployed in an execution group EG1. With the growth of thebusiness, the message transaction volume increases significantly. In order to increase the messagethroughput, an administrator: ?creates another execution group EG2. ?changes the message flow propertyAdditional Instances to 3 using the Broker Archive editor. ?redeploys the message flow into the executiongroups EG1 and EG2. How many threads can the broker use to service the message flow?

A. 3B. 5C. 6D. 8



QUESTION 23An administrator needs to change a user-defined property on a message flow using the Administration API(CMP API). Which method call should the administrator use to change the property?

A. ConfigManagerProxy.setUserProperty()

B. ConfigManagerProxy.setUserDefinedProperty()C. MessageFlowProxy.setUserDefinedProperty()D. MessageFlowProxy.getHandle(); setUserProperty()



QUESTION 24A broker has been created using default parameters. The broker is configured to allow the WebSphereApplication Server to be the JMS provider. When creating a JMS provider configurable service for theWebSphere_WAS_Client, the administrator issues the following command: mqsichangepropertiesMB7BROKER -c JMSProviders -o WebSphere_WAS_Client By default, where MUST the provider's JAR filesbe located on an AIX Message Broker system?

A. /var/mqsi/shared-classesB. /var/mqsi/MB7BROKER/shared-classesC. /opt/IBM/mqsi/7.0/classesD. /opt/IBM/mqsi/7.0/JMSProviders



QUESTION 25An administrator needs to view Resource Statistics data in WebSphere Message Broker Explorer for a remotebroker. After creating a connection to the remote broker, which action does the administrator need to performnext?

A. Select 'JMS Queues Setup'B. Enable Resource StatisticsC. Enable Message Flow StatisticsD. Subscribe to Resource Statistics



QUESTION 26A company needs to charge the customer based on the usage of its particular message flow on a broker. Howcan the administrator implement this?

A. Enable application logging.B. Ask the customer for their usage report on a weekly basis.C. Use accounting and statistics from the broker.D. Use a network gateway to assemble statistics on usage by customer.



QUESTION 27A BAR file which contains a message flow with SOAP nodes is provided by the development team fordeployment. Before deploying the BAR file, the administrator needs to verify whether or not the port number isdefined correctly. What should the administrator do to verify what ports have been allocated to the SOAPnodes?

A. Run command mqsireadbar.B. Run command mqsireportproperties.C. Ask the developer to provide the port number.D. Require the developer to provide the message flow source code.



QUESTION 28A developer is designing a message flow and has decided to use a secure SSL connection to a WebSphereService Registry and Repository. The administrator must configure the broker to use a keystore for the HTTPSconnection. Which type of keystore is supported?

A. JKS (JavaKeyStore)B. CMS (Cryptographic Message Syntax)C. JCEKS (Java Cryptography Extension KeyStore)D. PKCS12 (Public Key Cryptography Standard #12)



QUESTION 29An administrator needs to set up a separate authorized login ID that the broker MB7BROKER can use tosearch the LDAP directory. Which command should the administrator issue to store the username andpassword?

A. mqsisetdbparms MB7BROKER -n ldap::LDAP -u username -p passwordB. mqsisetdbparms MB7BROKER -s server::LDAP -u username -p passwordC. mqsisetdbparms MB7BROKER -q queue::<security.admin.queue> -u username -p passwordD. mqsisetdbparms MB7BROKER -s host::<Domain name> -u username -p password where domain name is

the base LDAP server name as ldap.mydomain.com

Correct Answer: ASection: (none)

Explanation


QUESTION 30An administrator needs to configure several broker instances on distributed platforms to use broker security.The brokers operation is dependant on the information which is provided in the broker registry which in allcases must be secured and guarded against accidental corruption or failure. Select where the broker userregistry is identified?

A. Windows RegistryB. /var/mqm/mqs.iniC. /var/mqm/qmgrs/MB7BROKER/qm.iniD. /var/mqsi/registry/BROKER/SecurityCacheE. /var/mqsi/registry/BROKER/AdminSecurity

Correct Answer: ACSection: (none)Explanation


QUESTION 31An administrator has been asked to enable broker administration security in a UNIX environment and restrictdeployment activities to users belonging to only a specific group. Which of the following commands does theadministrator need to use to achieve this?

A. mqsichangebroker, setmqautB. mqsichangebroker, mqsicreateaclentryC. mqsichangeproperties, setmqautD. mqsichangeproperties, mqsicreateaclentry



QUESTION 32An administrator needs to create a security mapping that uses a WS-Trust V1.3 compliant Security TokenServer (STS) using Tivoli Federated Identity Manager (TFIM) V6.2. For the TFIM V6.2 WS-Trust V1.3 endpoint,the path is /TrustServerWST13/services/RequestSecurityToken Which command should the administratorissue?

A. mqsicreateconfigurableservice brokername -c SecurityProfiles -v "WS-Trust v1.3 STS",/TrustServerWST13/services/RequestSecurityToken

B. mqsicreateconfigurableservice brokername -c SecurityProfiles -o profilename -n mapping,mappingConfig -v"WS-Trust v1.3 STS",/RequestSecurityToken

C. mqsicreateconfigurableservice brokername -c SecurityProfiles -o profilename -n mapping,mappingConfig -v"WS-Trust v1.3 STS",http://stsserver.mycompany.com:9080/TrustServerWST13/services/RequestSecurityToken

D. mqsicreateconfigurableservice brokername -o profilename -n mapping,mappingConfig -v "WS-Trust v1.3STS",/TrustServerWST13/services/RequestSecurityToken



QUESTION 33An administrator has activated the broker administration security for broker BRK running under queue managerBRKQMGR on a Windows system. The administrator has been asked to grant view and deploymentpermissions for user 'User1' only to execution group 'EG1'. Which of the following set of commands does theadministrator need to run?

A. setmqaut -m BRKQMGR -t qmgr -p User1 +connect +inq setmqaut -m BRKQMGR -t queue -nSYSTEM.BROKER.AUTH -p User1 -all setmqaut -m BRKQMGR -t queue -nSYSTEM.BROKER.AUTH.EG1 -p User1 +all

B. setmqaut -m BRKQMGR -t qmgr -p User1 +all setmqaut -m BRKQMGR -t queue -nSYSTEM.BROKER.DEPLOY.QUEUE -p User1 +put +get setmqaut -m BRKQMGR -t queue -nSYSTEM.BROKER.AUTH -p User1 llsetmqaut -m BRKQMGR -t queue -n SYSTEM.BROKER.AUTH -pUser1 ?ll setmqaut -m BRKQMGR -t queue -n SYSTEM.BROKER.AUTH.EG1 -p User1 +all

C. setmqaut -m BRKQMGR -t queue -n SYSTEM.BROKER.DEPLOY.QUEUE -p User1 +put setmqaut -mBRKQMGR -t queue -n SYSTEM.BROKER.DEPLOY.REPLY -p User1 +put +get setmqaut -m BRKQMGR -t queue -n SYSTEM.BROKER.AUTH -p User1 llsetmqaut -m BRKQMGR -t queue -nSYSTEM.BROKER.AUTH -p User1 ?ll setmqaut -m BRKQMGR -t queue -n SYSTEM.BROKER.AUTH.EG1-p User1 +all

D. setmqaut -m BRKQMGR -t qmgr -p User1 +connect +inq setmqaut -m BRKQMGR -t queue -nSYSTEM.BROKER.DEPLOY.QUEUE -p User1 +put setmqaut -m BRKQMGR -t queue -nSYSTEM.BROKER.DEPLOY.REPLY -p User1 +put +get setmqaut -m BRKQMGR -t queue -nSYSTEM.BROKER.AUTH -p User1 +inq setmqaut -m BRKQMGR -t queue -nSYSTEM.BROKER.AUTH.EG1 -p User1 +put +inq



QUESTION 34The broker environment in a company is as follows: The administrator has set up Public Key Infrastructure(PKI) at the broker level. For the flows that contained SOAP Input nodes, the administrator has set up PKI atthe execution group level. The administrator also configured the broker-wide listener for the HTTP node basedweb services. In this environment, the administrator was asked to deploy a new secured web service based onHTTP nodes in the same execution group that contained SOAP node based web service. After a few days thepartner system that was making HTTP(s) calls to this new web service reported SSL certificate expiry errors.What should the administrator do to resolve this problem?

A. Update the certificate at the broker level PKI.B. Update the certificate at the execution group level PKI.C. Use the command mqsireloadsecurity to update the certificate.D. Use the command mqsichangeproperties to update the certificate



QUESTION 35An administrator has configured a security policy to use LDAP. When issuing themqsicreateconfigurableservice command, what MUST the administrator do with the LDAP URL?

A. Use a fully qualified domain name.B. Use an IP address instead of a domain name.C. Enclose all values with spaces in double quotes.D. Enclose the URL in backslash-escaped double quotes.



QUESTION 36An administrator is setting up a new broker environment where all users have to use SSL to connect to thebroker from the toolkit. The administrator passes on the following details for connecting to the broker along withthe SSL Certificate to the developers: HostName: server1.xyz.com QueueManager Name: BRKQMGR Port:Default Port Server Connection Channel: Default Value SSL CipherSpec: NULL_MD5 The administrator isnotified that one of the developers is getting errors while trying to access the broker. The developer has passedon the following screen shot of the connection parameters: What should the administrator suggest to resolvethe problem?

A. Enter the value of Cipher Suite as NULL_MD5A.Enter the value of Cipher Suite as NULL_MD5B. Enter the value of Cipher Suite as SSL_RSA_WITH_NULL_MD5B.Enter the value of Cipher Suite as

SSL_RSA_WITH_NULL_MD5C. Enter the value of SVRCONN Channel Name as SYSTEM.ADMIN.SVRCONNC.Enter the value of

SVRCONN Channel Name as SYSTEM.ADMIN.SVRCONND. Enter the value of Key Store as C:\Test\trustStore instead of Trust StoreD.Enter the value of Key Store as

C:\Test\trustStore instead of Trust Store



QUESTION 37An administrator has been requested to create a security profile by using either themqsicreateconfigurableservice command or the WebSphere Message Broker Explorer. The purpose of thesecurity profile is to use external security providers to provide the required security enforcement and mapping.Which of the following types of security profiles can be defined for an external security provider?

A. X.509B. LDAPC. SAMLD. WS-Trust v1.0E. WS-Trust v1.3

Correct Answer: BE



QUESTION 38An administrator has experienced an issue with a message flow that receives email. In order to troubleshootthis issue, the administrator has collected a service trace. What MUST the administrator do to get this traceanalyzed?

A. Open a Problem Management Report.B. Run the mqsiformatlog commandC. Upload the trace file to developerWorks.D. Import the trace into the IBM Support Portal.



QUESTION 39An administrator notices that one of the execution groups throws an 'Out of Memory' error while processingmessages of size greater than 4MB. On a detailed analysis, the administrator notices that a new flow has beendeployed in the execution group that has around 20 nodes but a lot of them are user defined nodes. Whataction should the administrator take to resolve this problem?

A. Increase the memory of the system.B. Increase the stack size of the execution group.C. Increase the JVM heap size of the execution group.D. Deploy the flow causing the issue in a new execution group.



QUESTION 40An administrator needs to gather a detailed user level trace to diagnose an issue with a flow F1 in executiongroup EG1 on broker MB7BROKER. The flow has trace nodes included that will write data to the usertrace, butthey are disabled by default. The administrator enables user trace in WebSphere Message Broker Explorer.What command does the administrator then run?

A. mqsichangetrace MB7BROKER -u -e EG1 -f F1B. mqsichangetrace MB7BROKER -t -e EG1 -f F1C. mqsichangetrace MB7BROKER -u -e EG1 -l debugD. mqsichangetrace MB7BROKER -n on -e EG1 -f F1




QUESTION 41An administrator has experienced an issue with WebSphere Message Broker Explorer (MBX), and worked withIBM Support through a Problem Management Report (PMR). An interim fix has been provided. To install theinterim fix, the administrator needs to:

A. install the fix into a new location.B. follow the instructions that come with the fix.C. manually replace files in the MBX install location.D. run Installation Manager and point it at the fix files.



QUESTION 42An administrator creates a broker BRK on AIX. The administrator is notified that an execution group isrepeatedly crashing while processing messages. The administrator decides to view the contents of the abendfiles to find out more details about the errors. Where are the abend files located?

A. /var/admB. /var/mqsi/BRK/errorsC. /var/mqsi/common/errorsD. /var/mqsi/components/BRK/errors



QUESTION 43An administrator is receiving an error when modifying the JVM Debug port for a Broker using themqsichangeproperties command. The administrator needs to trace the execution of the mqsichangepropertiescommand to determine the failure. What step is necessary?

A. Run mqsichangetrace command.B. Review the system log for BIP errors.C. Add the -v parameter and specify the trace file.D. Set the MQSI_UTILITY_TRACE environment variable.

Correct Answer: DSection: (none)

Explanation


QUESTION 44An administrator has set up a new broker environment which involves installing some user-defined extensions.The administrator is later notified by the development team that they are unable to deploy and test some of theflows involving user-defined extensions. How can the administrator verify which of the user-defined extensionshave been loaded by the broker?

A. mqsilistB. mqsireportbrokerC. mqsireportpropertiesD. mqsireportflowuserexits



QUESTION 45An administrator needs to use WebSphere Message Broker 7.0 with an existing high availability (HA) managerHACMP. The administrator has created and added the broker to the HA environment. How should theadministrator start the broker?

A. Use the support pack IC91.B. Use the HACMP SupportPac.C. Use the mqsistart command.D. Use the hamqsi_start_broker script file.



QUESTION 46An administrator needs to configure multi-instance WebSphere Broker environments that allow for thecontinued processing of already existing and new incoming messages at the messaging layer. What are thetasks required to configure a multi-instance broker on WebSphere Message Broker? Two network servers areto:

A. operate in isolated cells to provide high availability (HA) linked using MQ Clustering for load balancing.B. be configured to host separate Logical Unit Number (LUN) for the work path for the multi-instance broker

and queue manager.C. be configured to host shared work paths for the multi-instance broker and shared directories for the multi-

instance queue manager (Active/Passive).D. be configured to host separate work paths on a shared file system for the multi-instance broker and queue

manager to allow for isolated redundancy of each broker instance (Active/Passive).

Correct Answer: CSection: (none)

Explanation


QUESTION 47In configuring a WebSphere Message Broker to run in a multi-instance mode, a NFS V4 share is created andmounted on nodes A and B. Which of the following steps does an administrator need to take before a multi-instance broker can be created?

A. Create a queue manager on each node and add them in a cluster.B. Create a queue manager on each node using the same queue manager name.C. Create shared directories and then a multi-instance queue manager.D. Create shared directories and then a queue manager on each node.



QUESTION 48An administrator needs to backup a multi-instance WebSphere Message Broker 7.0 implemented on theWindows environment. What command should the administrator use?

A. mqsibackup BRK1 -d /BackupDirectory/WMBB. mqsibackup BRK1 -d C:\MQSI\BACKUP -v C:\MQSI\BACKUP\trace.logC. mqsibackupbroker BRK1 -d /BackupDirectory/WMBD. mqsibackupbroker BRK1 -d C:\MQSI\BACKUP -v C:\MQSI\BACKUP\trace.log



QUESTION 49WebSphere Message Broker Version 7.0 has made it easier to use a high availability manager. The scripts todo this are now in the V7 Info Center, but were developed under a SupportPac. Which SupportPac?

A. IC61B. IC63C. IC72D. IC91



QUESTION 50A multi-instance broker has been created on nodes A and B. To verify the multi-instance broker, an

administrator starts the broker on node A and then on node B, and then runs the command mqsilist. What stateof the broker will be displayed if the multi-instance broker is running successfully? The broker is running:

A. in active mode on both nodes A and B.B. in active mode on node A and stopped mode on node B.C. in active mode on node A and in standby mode on node B.D. in active mode on node B and in standby mode on node A.



QUESTION 51An administrator is receiving an MQ error when trying to perform a deployment to a Broker using theWebSphere Message Broker Explorer. The administrator needs to trace the execution of the WebSphereMessage Broker Explorer to determine the failure. What step is necessary?

A. Add the -v parameter to strmqcfg.B. Run mqsichangetrace command.C. Set the MQSI_UTILITY_TRACE environment variable.D. Change the Explorer properties to set a trace file and size.



QUESTION 52An administrator needs to gather a detailed user level trace in order to diagnose an issue with a flow F1 inexecution group EG1 on broker MB7BROKER. What command does the administrator issue?

A. mqsichangetrace MB7BROKER -u -e EG1 -f F1 -l on -rB. mqsichangetrace MB7BROKER -u -e EG1 -f F1 -l debug -rC. mqsichangetrace MB7BROKER -t -e EG1 -f F1 -l normal -rD. mqsichangetrace MB7BROKER -n on -e EG1 -f F1 -l debug -r



QUESTION 53An administrator is notified by the developer that the WebSphere Message Broker Toolkit is crashing whendebugging complex flows in a Windows XP machine. Which of the following files should the administratorrequest the developer to send to find more details about the error?

A. <workspace>\.metadata\.logB. <workspace>\.metadata\errors

C. C:\Documents and Settings\All Users\Application Data\IBM\MQSI\.logD. C:\Documents and Settings\All Users\Application Data\IBM\MQSI\errors



QUESTION 54An administrator needs to configure a property of the Broker SOAPListener to ensure that it will meet a newrequirement. The property is not currently configurable. What action should the administrator take to meet thisneed?

A. Open a Requirement.B. Open a Problem Management Report (PMR).C. Alter the config.xml of the Axis engine.D. Use the Admin API to update the execution group.



QUESTION 55An administrator is asked to install the broker component on Windows Server 2003. The administrator noticesthat the installation process freezes after a few minutes. Which file will provide the administrator with more errordetails?

A. %HOMEPATH%\mqsi7_install.logB. %HOMEPATH%\mqsi7_install.errorsC. C:\Documents and Settings\All Users\Application Data\IBM\mqsi7_install.logD. C:\Documents and Settings\All Users\Application Data\IBM\mqsi7_install.errors



QUESTION 56An administrator is asked to enable broker administration security in the development environment for brokerBRK running under queue manager BRKQMGR. The administrator is notified that some of the developers areencountering authorization errors while performing deployment operations. Which directory should theadministrator check to get more details about the errors?

A. /var/mqsi/common/logB. /var/mqsi/common/errorsC. /var/mqsi/components/BRK/errorsD. /var/mqm/qmgrs/BRKQMGR/errors

Correct Answer: D



QUESTION 57An administrator plans to install WebSphere Message Broker Explorer V7.0 in an environment whereWebSphere Message Broker Explorer Plug-in(SupportPac IS02) has already been installed. In addition torunning the installer, what other step does the administrator need to do to successfully install the WebSphereMessage Broker Explorer?

A. Delete the SupportPac IS02 extracted directory.B. The installer will remove any existing installation of SupportPac IS02.C. Update the BrokerExplorer.link file copied into the MQ_Install_Root\eclipseSDK33\eclipse\links where

MQ_Install_Root is the WebSphere MQ installation root replacing the .ini file with V7 values.D. Delete the SupportPac extracted directory and delete the BrokerExplorer.link file copied into the

MQ_Install_Root\eclipseSDK33\eclipse\links where MQ_Install_Root is the WebSphere MQ installationroot.



QUESTION 58Team members of a development project were asked to install WebSphere Message Broker 7.0 onto theirmachines. The company is only licensed for Starter Edition. How can the administrator ensure that only theStarter Edition was used?

A. Use mqsimode to list and change the mode of the broker.B. Use mqsilist to list the mode and use mqsichangebroker to change the mode of the broker.C. Use mqsimode to list the mode and use mqsichangebroker to change the mode of the broker.D. Use mqsilist to list the mode and use mqsichangeproperties to change the mode of the broker.



QUESTION 59An administrator needs to install WebSphere Message Broker V7.0 in a system where WebSphere MQ V6 isrunning. What does an administrator have to perform before the installation?

A. Install WebSphere MQ V7.0B. Install and migrate WebSphere MQ resources to WebSphere MQ V7.0.1C. Migrate WebSphere MQ V6 to WebSphere MQ V6.1D. Migrate WebSphere MQ V6 to Websphere MQ V7.0



QUESTION 60A company has legacy and modern applications co-existing in their enterprise environment. The legacyapplication requires business messages in COMMAREA formats while the modern application requires XMLformat for processing. There is a need for their web application to interact with legacy and modern applicationto process a transaction. What is the recommended way for implementing the desired solution?

A. Split the business use case to two different transactions each invoking one target component.B. Invoke the modern application on XML format request then process the legacy application request.C. Implement two different format request invocation from the application to the target componentsD. Implement WebSphere Message Broker and route the request on specified formats to the target

components.



QUESTION 61A company has the following WebSphere Message Broker 6.0 components installed in its environment. Oracle10g Release 2 WebSphere MQ V7.0.0 Rational Agent Controller V5.0.2.1 Java Runtime Environment V5 Tomigrate to WebSphere Message Broker V 7.0, the administrator needs to update:

A. Java Runtime Environment V5 to V6.B. Oracle 10g Release 2 to 11g Release 1.C. IBM WebSphere MQ V7.0.0 to V7.0.1.D. IBM WebSphere MQ V7.0.0 to V7.0.1 and Rational Agent Controller V5.0.2.1 to V6.0.



QUESTION 62A company has a business scenario whereby a request on their application has to pass through variousvendors to generate a response. Each vendor invocation results in a message response which comes indifferent formats (SWIFT, XML, SEPA). The final response to the initial request has to be sent in EDIFACTformat to the end client. What is the recommended way for implementation?

A. Implement selective aggregation on the vendors' messages at the application layer.B. Implement transformation and aggregation of the vendors' responses in WebSphere Message Broker.C. Implement transformation of each vendor's message to XML at the application layer and send to client for

aggregation.D. Implement business logic on the vendor component to send response in XML format to the WebSphere

Message Broker.



QUESTION 63An administrator needs to provide two brokers on a dedicated Windows operating system. What are the systemrequirements for the above topology?

A. Minimum of 512 MB RAMB. Minimum of 512 MB RAM and 1 GB of swap spaceC. Minimum of 512 MB RAM and 2 GB of swap spaceD. Minimum of 1 GB RAM and 1 GB of swap space for each broker



QUESTION 64A flow MF has been configured to generate transaction start monitoring events on a production system. Theadministrator is notified that another flow AF deployed in the same execution group has to be configured togenerate similar transaction start monitoring events with the least downtime and changes to the flow. Theadministrator performs the following sequence of steps: 1. Uses the command mqsireportflowstats to generatethe monitoring profile for flow MF and updates it to reflect changes for flow AF. 2. Uses the commandsmqsicreateconfigurableservice and mqsichangeproperties to create a new configurable service with theupdated monitoring profile. Which additional step does the administrator need to perform to achieve theobjective?

A. Use the command mqsireload to reload the execution group for the configurable service to become active.B. Run the command mqsichangeflowmonitoring to apply the newly created configurable service and enable

monitoring on the flow AF.C. Use the command mqsiapplybaroverride on the BAR file for flow AF to apply the newly created configurable

service and deploy it to the broker.D. Open the BAR file for flow AF in the Broker Archive Editor and edit the Monitoring Profile Name to reflect the

newly created configurable service and deploy it to the broker.



QUESTION 65A message flow in the development environment is promoted into the User Acceptance Testing (UAT)environment. Before deployment, an administrator needs to make changes to the data source used by themessage flow in the BAR file. What command does the administrator need to run?

A. mqsichangebrokerB. mqsichangeflowstatsC. mqsiapplybaroverrideD. mqsichangeproperties

Correct Answer: C



QUESTION 66Broker BRK1 consists of execution group EG1 in which message flow Flow1 is deployed and running. Flow1has been deployed with the BAR file flow1.bar. The administrator needs to remove the deployed Flow1. Whatcommand should the administrator execute?

A. mqsideploy BRK1 -e EG1 -d Flow1.cmfB. mqsideploy BRK1 -e EG1 -d -a flow1.barC. mqsideploy BRK1 -e EG1 -f Flow1 -dD. mqsideploy BRK1 -d EG -r Flow1.cmf -c



QUESTION 67An administrator needs to create the same configurable service on several brokers. The administrator uses theWebSphere Message Broker Explorer to create a service on one broker. At a minimum, what does theadministrator need to do to create the same service on other brokers using Message Broker Explorer?

A. Drag and Drop the configurable service on each broker.B. Drag and Drop the configurable service onto a Broker Set.C. Manually create the configurable service on each broker.D. Import the configurable service from a .configurableservice file.



QUESTION 68A message flow that includes HTTP nodes is deployed to 3 execution groups in a broker. All HTTP nodes areconfigured to use a single port. After performance testing, it is decided that the inbound and outbound HTTPmessages in each execution group should be routed through separate listener ports in order to achieve higherthroughput. An administrator is asked to make the configuration changes. Which one of the following actions isrequired to achieve this?

A. Run command mqsichangeproperties to enable the broker-wide listener.B. Run command mqsichangeproperties to disable the broker-wide listener.C. Run command mqsichangeproperties to disable all of the execution group listeners.D. Run command mqsichangeproperties to enable one of the execution group listeners.



QUESTION 69An administrator needs to apply Fixpack 7.0.0.1 to the WebSphere Message Broker V 7.0 on AIX. From whereshould the administrator obtain the Fixpack?

A. Log into the IBM Support Center and download the Fixpack.B. Download the Fixpack from the WebSphere Message Broker support page on the IBM support portal.C. Log into the Electronic Service Request (ESR/SR) tool and raise a Problem Management Record (PMR) to

request the Fixpack.D. Contact IBM Support by phone using your region-specific telephone number as listed on the website at

http://www.ibm.com/planetwide/ and request them to send the Fixpack.



QUESTION 70An administrator has been asked to apply measures to increase throughput of one of the flows that processesmessages to meet additional demands. The administrator does a quick check of the various system resourcesand notices that overall cpu and memory utilization is well within the limits but the size of the execution group ison the higher side. Which one of the following options does the administrator need to apply to increase thethroughput?

A. Increase the stack size of the execution group.B. Increase the JVM Heap Size of the execution group.C. Deploy another instance of the flow in a newly created execution group.D. Change the additional instances parameter to 20 in the broker archive file and deploy.



QUESTION 71An administrator is asked to write an Administration API (CMP API) based application for monitoring themessage broker environment. What are prerequisites to run Java applications that use the CMP API?

A. A configuration manager API (CMP API) Exerciser.B. A Java Development Kit (JDK) at a supported Java level.C. A WebSphere MQ queue manager running on the server.D. A local broker running on that environment to connect to remote brokers.E. The WebSphere MQ Classes for Java added to classpath.

Correct Answer: BESection: (none)Explanation


QUESTION 72An administrator has defined a new IMSConnect configurable service and deployed the message flow to theappropriate execution group. After the deployment, it was identified that the execution time-out value within theconfigurable service was set too low. What MUST the administrator do to resolve this?

A. Change the properties of the configurable service (mqsichangeproperties) and then restart the broker.B. Change the properties of the configurable service (mqsichangeproperties) and then restart the execution

group.C. Delete the IMSConnect configurable service (mqsideleteconfigurableservice) and redefine

(mqsicreateconfigurableservice) with new values and then restart the broker.D. Delete the IMSConnect configurable service (mqsideleteconfigurableservice) and redefine

(mqsicreateconfigurableservice) with new values including the redeployment of the message flow to theexecution group.



QUESTION 73An administrator needs to stop flow F1 deployed on execution group EG1 on broker TEST without affectingother runtime components. What command does the administrator need to use?

A. mqsistopmsgflow TEST -e EG1 -f F1B. mqsistopmsgflow TEST -e EG1 -m F1C. mqsistopmsgflow TEST.broker -e EG1 -jD. mqsistopmsgflow TEST.broker -e EG1 -m F1



QUESTION 74A BAR file Solutionv1.bar has been deployed. The developer created a BAR file Solutionv2.bar to meet newbusiness requirements and asked the administrator to deploy it. The content of these BAR files is listed below.Content of the file Solutionv1.bar: MsgFlow1.cmf MsgFlow2.cmf MsgSet1.dictionary MsgSet2.dictionaryContent of the file Solutionv2.bar: MsgFlow1New.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet3.dictionaryThe administrator performed a successful incremental deployment to an execution group. What artifacts are inthe execution group?

A. MsgFlow1New.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet3.dictionary

B. MsgFlow1New.cmf MsgFlow1.cmf MsgFlow2.cmf MsgSet1.dictionary MsgSet2.dictionary

C. MsgFlow1.cmf MsgFlow2.cmf

MsgFlow3.cmf MsgSet1.dictionary MsgSet2.dictionary MsgSet3.dictionary

D. MsgFlow1New.cmf MsgFlow1.cmf MsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet2.dictionary MsgSet3.dictionary

E. MsgFlow1New.cmf MsgFlow1.cmfMsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet2.dictionary MsgSet3.dictionary

F. MsgFlow1New.cmf MsgFlow1.cmf MsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet2.dictionary MsgSet3.dictionary

G. MsgFlow1New.cmf MsgFlow1.cmf MsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionary MsgSet2.dictionary MsgSet3.dictionary

H. MsgFlow1New.cmfMsgFlow1.cmf MsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionaryMsgSet2.dictionary MsgSet3.dictionary

I. MsgFlow1New.cmfMsgFlow1.cmf MsgFlow2.cmf MsgFlow3.cmf MsgSet1.dictionaryMsgSet2.dictionary MsgSet3.dictionary

Correct Answer: DEFGHISection: (none)Explanation


QUESTION 75An administrator needs to start collecting resource statistics for the default execution group for BrokerV7.Which command should the administrator use?

A. mqsichangeresourcestats BrokerV7 -c active -e defaultB. mqsichangeresourcestats BrokerV7 -c activeC. mqsichangeproperties BrokerV7 -c active -e defaultD. mqsichangeproperties BrokerV7 -c active



QUESTION 76An administrator needs to create execution groups on different brokers. How can the administrator automatethe creation of the execution group?

A. Write a native code program and execute that across each environment.B. Create an automatic execution group command on the broker environment.C. Use system tools to schedule a script that runs the mqsideploy command.D. Using the CMP API exerciser, record a script of execution group creation which can then be reused on

other environments.



QUESTION 77An administrator executes the command mqsicreateexecutiongroup -n TEST.broker -e EG1 -w 300 -v trace.txtto create the execution group EG1 on the broker TEST. What is the outcome of the command? Createsexecution group EG1 on the broker:

A. named TEST and waits for 300 seconds to start the execution group.B. named TEST and waits for 300 seconds to start the execution group and then write to the trace file.C. specified in the broker file TEST.broker, creates a trace file and wait for 300 seconds to start the execution

group.D. specified in the broker file TEST.broker, waits for up to 300 seconds for the broker to respond and creates a

trace file.



QUESTION 78An administrator needs to update an existing Problem Management Record (PMR) with specific technicalinformation. How can the administrator perform this activity in the least amount of steps?

A. Use IBM Electronic Service Agent to update the PMR.B. Log into the Passport Advantage web page and update the PMR.C. Log into the Electronic Service Request (ESR/SR) tool and update the PMR.

D. Contact IBM Support by phone using your region-specific telephone number..



QUESTION 79An administrator has backed up a broker using the mqsibackupbroker command. This command is run weeklyafter deployments are made. Each output file is kept in a version control repository. The administrator nowneeds to restore one single execution group to the configuration it had three weeks ago. Which commandshould the administrator run to accomplish this task?

A. mqsideployB. mqsireloadC. mqsichangebrokerD. mqsirestorebroker



QUESTION 80An administrator needs to automatically invoke a user-written script when the broker command environment isinitialized. How does the administrator accomplish this in a UNIX and/or Linux environment?

A. Add the script to the same directory as the command mqsiprofile.B. Add the script to the directory $MQSI_WORKPATH/common/profiles.C. Change the location of the command mqsiprofile to the directory where the script resides.D. Change the location of the command mqsiprofile to the directory $MQSI_WORKPATH/common/profiles.



QUESTION 81An administrator has backed up a broker on a Windows 2003 system using the command mqsibackupbroker.The administrator attempts to restore the broker on a Windows 7 system using the commandmqsirestorebroker. What is the outcome? The restore command:

A. fails because Windows 7 is 64-bit.B. fails because the queue manager was not created first.C. fails because the operating system level is not the same.D. succeeds, but the queue manager is not restored.



QUESTION 82A broker is being configured to allow WebSphere Application Server to be the JMS provider. The administratorissued this command to define the Message Broker Instance: mqsicreatebroker MB7BROKER -i wmbadmin -apassword -q MB7QMGR -w /var/mqsi/MB7BROKER When creating a JMS provider configurable service for theWebSphere_WAS_Client, the administrator issues the following command: mqsichangepropertiesMB7BROKER -c JMSProviders -o WebSphere_WAS_Client Where MUST the provider's JAR files be locatedon the AIX system?

A. /var/mqsi/shared-classesB. /var/mqsi/MB7BROKER/shared-classesC. /opt/IBM/mqsi/7.0/classesD. /opt/IBM/mqsi/7.0/JMSProviders



QUESTION 83A BAR file including a message flow with MQInput node is deployed to a test environment. After the test issuccessfully completed, an administrator is asked to deploy the same BAR file to the UAT environment. Theadministrator uses the broker archive editor to change the queue name in MQInput node. However, afterclicking uild broker archive? the queue name does not change.node. However, after clicking ?uild brokerarchive? the queue name does not change. What does the administrator need to do?

A. Ask the developer to provide a new BAR file.B. Open the file Broker.xml to set the new queue name.C. Uncheck the build option verride configurable properties values?Uncheck the build option ?verride

configurable properties values?D. Check the build option emove content of Broker Archive before building?Check the build option ?emove

content of Broker Archive before building?



QUESTION 84An administrator needs to deploy several BAR files to the same execution group (EG) using WebSphereMessage Broker Explorer. Not all of the BAR files are in the WebSphere Message Broker Explorer workspace.How can the administrator perform the task in one step?

A. Import the BAR files into the workspace and then deploy them.B. Select the EG and then Deploy; choose the BAR files.C. Select the BAR files in the file system and then drag them to the EG.D. Select the BAR files in the workspace and then drag them to the EG.

Correct Answer: B



QUESTION 85A company is planning to evaluate WebSphere Message Broker as an ESB across its various departments.The administrator is asked to set up a new broker environment for this purpose with the condition that onedepartment does not have any access to other department's resources. Which of the following options shouldthe administrator implement that will involve the least administrative overhead?

A. Create broker set up in a separate machine for each department.B. Create one broker per department and run each broker under a different user ID.C. Create one execution group for each department and use access control lists to restrict access.D. Create one execution group for each department and use the broker administration security to restrict

access.



QUESTION 86An administrator has enabled broker admin security for a broker running in Windows Server. The administratoris notified that a new user needs to have view access of all the execution groups and the associated flows inthe broker. The administrator grants authorizations to the user on the following queues:SYSTEM.BROKER.DEPLOY.QUEUE SYSTEM.BROKER.DEPLOY.REPLY SYSTEM.BROKER.AUTH Later,the administrator is notified that the user is not able to view any execution groups and the message flows evenafter connecting to the broker. Which of the following is the reason why the user is unable to view the executiongroups and message flows?

A. The broker component is not running.B. The administrator did not grant connect options to the queue manager.C. The administrator did not grant authorizations on SYSTEM.BROKER.AUTH.**D. The administrator did not run the mqsicreateaclentry command to give authorizations.



QUESTION 87An administrator needs to create a security profile that uses SSL secured Tivoli?Federated Identity Manager(TFIM) V6.1 that runs on URL https://tfimserver.mycompany.com:9443. Which command should theadministrator issue?

A. mqsichangeproperties brokername -c SecurityProfiles -n mapping,mappingConfig -v TFIM,http://tfimserver.mycompany.com:9443

B. mqsichangeproperties brokername -c SecurityProfiles -n mapping,mappingConfig -v TFIM,https://tfimserver.mycompany.com:9443

C. mqsicreateconfigurableservice brokername -o profilename -n mapping,mappingConfig -v TFIM,http://

tfimserver.mycompany.com:9443D. mqsicreateconfigurableservice brokername -c SecurityProfiles -o profilename -n mapping,mappingConfig -v

TFIM,https://tfimserver.mycompany.com:9443



QUESTION 88An administrator is required to configure the Public Key Infrastructure at the broker level. This will allow use ofHTTPS request calls to web services. Which commands will set the keystore and truststore properties?

A. mqsichangeproperties MB7BROKER -o BrokerRegistry -n KeystoreFile -v /var/mqsi/MB7BROKER/MB7BROKER.jks

B. mqsichangeproperties MB7BROKER -o BrokerRegistry -n TruststoreFile -v /var/mqsi/MB7BROKER/MB7BROKER.jks

C. mqsichangeproperties MB7BROKER -o BrokerRegistry -n brokerKeystoreFile -v /var/mqsi/MB7BROKER/MB7BROKER.jks

D. mqsichangeproperties MB7BROKER -o BrokerRegistry -n brokerTruststoreFile -v /var/mqsi/MB7BROKER/MB7BROKER.jks

E. mqsichangeproperties MB7BROKER -o Registry -n TruststoreFile -v /var/mqsi/MB7BROKER/MB7BROKER.jks

Correct Answer: CDSection: (none)Explanation


QUESTION 89An administrator has applied the Security Profiles to the SecurityPEP node, and the Security Profiles areconfigured by the administrator at deployment time. What methods can the administrator use to modify andenable newly created Security Profiles prior to deployment?

A. mqsichangepropertiesB. mqsicreateconfigurableserviceC. mqsimodifyconfigurableserviceD. mqsichangeconfigurableserviceE. BAR file editor in the WebSphere Message Broker toolkit

Correct Answer: BESection: (none)Explanation


QUESTION 90A company has a broker environment where message flows belonging to a specific business unit wereconnecting to an LDAP Server LDAP1 using anonymous bind for authorization. Later the company asks theadministrator to extend the broker environment to another business unit that had their own LDAP ServerLDAP2. The administrator runs the following command to achieve this: mqsisetdbparms -n ldap::LDAP -u

username -p password The administrator is then notified that the message flows that were using LDAP ServerLDAP1 started throwing errors. What should the administrator do to resolve the problem?

A. Restart the LDAP Server LDAP1.B. Run the command mqsireloadsecurityC. Run the command mqsisetdbparms -n ldap::LDAP1 -u anonymous -p passwordD. Delete the entry for ldap::LDAP and use the command mqsicreateconfigurableservice to specify LDAP2

username and password.



QUESTION 91An administrator needs to configure a security policy to provide authentication, authorization and mapping.Which of the following security providers can be used?

A. OpenLDAP v2.4B. Tivoli Federated Identity Manager v6.1C. WS-Trust V1.2 compliant security token serverD. WebSphere Service Registry and Repository v6.1.0.2



QUESTION 92An administrator needs to establish a secure connection between Broker MB7BROKER and the WebSphereService Registry and Repository (WSRR) instance named DefaultWSRR . To change the endpointAddressconfiguration parameter to specify HTTPS and the secure port for the DefaultWSRR of the ServiceRegistriesconfigurable service, which command should the administrator issue?

A. mqsichangeproperties MB7BROKER -c ServiceRegistries -o DefaultWSRR -o endpointAddressB. mqsichangeproperties MB7BROKER -c ServiceRegistries -o DefaultWSRR -p -q 180 -v https://

localhost:9443/WSRR6_1/services/WSRRCoreSDOPortC. mqsichangeproperties MB7BROKER -c ServiceRegistries -o DefaultWSRR -n endpointAddress -v https://

localhost:9443/WSRR6_1/services/WSRRCoreSDOPortD. mqsichangeproperties MB7BROKER -a endpointAddress -v https://localhost:9443/WSRR6_1/services/

WSRRCoreSDOPort



QUESTION 93An administrator was asked to give security permissions to an Administration API based application thatdisplays the execution groups and associated message flows. Which of the following security access levels

should the administrator set for the application's user ID?

A. SYSTEM.BROKER.AUTH : InquireB. SYSTEM.BROKER.AUTH : Inquire, Put, GetC. SYSTEM.BROKER.AUTH,SYSTEM.BROKER.AUTH.** : InquireD. SYSTEM.BROKER.AUTH,SYSTEM.BROKER.AUTH.** : Inquire, Put, Get

Correct Answer: Section: (none)Explanation


QUESTION 94An administrator has created a broker with its default parameter values. It is required that security be enabledfor this broker to control which developers will have the ability to Start, Stop and Deploy to an execution group.What steps should the administrator take to activate the broker administration security before granting andrevoking authority for requests?

A. Run mqsichangebroker command and specify the broker with -s active parameter, then stop and restart thebroker.

B. Run mqsichangebroker command and specify the broker with -s enabled parameter, then stop and restartthe broker.

C. Stop the broker, run mqsichangebroker command and specify the broker with -s active parameter andrestart the broker.

D. Stop the broker, run mqsichangebroker command and specify the broker with -a active parameter andrestart the broker.



QUESTION 95A multi-instance broker is configured on nodes A and B in an AIX system. Due to a network failure on node A,the multi-instance broker is automatically failed over to node B. After the problem was fixed on node A, anadministrator is asked to switch the multi-instance broker back to node A. What does the administrator need todo?

A. Start the multi-instance broker on node A and stop the multi-instance broker on node B.B. Start the multi-instance broker on node B and stop the multi-instance broker on node A.C. Stop the multi-instance queue manager on node A and start the multi-instance broker on node B.D. Stop the multi-instance queue manager on node B and start the multi-instance broker on node A.



QUESTION 96A multi-instance broker BRK1 associated with the multi-instance queue manager BRK1QM is running in active

mode on node A and in standby mode on node B. An administrator needs to make a controlled failover to thestandby broker in order to perform system maintenance on node A. What command does the administratorneed to run to initiate the controlled failover process?

A. mqsistop BRK1 on node AB. mqsistop BRK1 on node BC. endmqm -s BRK1QM on node AD. endmqm -s BRK1QM on node B



QUESTION 97An administrator needs to use WebSphere Message Broker 7.0 with an existing high availability (HA) managerHP-UX Serviceguard. The administrator has created and added the broker to the HA environment. How shouldthe administrator monitor the broker?

A. Use the SupportPac IC91.B. Use the mqsilist command.C. Use the mqsireportproperties commandD. Use the hamqsi_monitor_broker_as script file.



QUESTION 98An administrator is planning to build a broker run-time environment where the MQ message delivery is assuredand all broker resources are highly available. What is the required environment for high availability?

A. Utilize a broker and MQ publish/subscribe topology.B. Non-persistent message adoption with redundant broker resources.C. Persistent message adoption with a clustered queue in the broker.D. Persistent messages on a clustered queue with redundant broker and broker resources.



QUESTION 99An administrator needs to remove a multi-instance broker from a server where WebSphere Message Broker7.0 has been installed. What command should the administrator use?

A. mqsideletebrokerB. mqsiremovebroker

C. mqsideletebrokerinstanceD. mqsiremovebrokerinstance



QUESTION 100An administrator needs to configure the broker to withstand software or hardware failures when working withSAP. WebSphere Message Broker V7.0 provides specific functionality to move the Transaction ID (TID) storeto a remote queue manager which can be shared between two brokers. To avoid a single point of failure whatMUST the administrator do to mitigate this risk using high availability?

A. Use a third queue manager on a remote network server (stand-alone).B. Use a third queue manager clustered with the two broker queue managers.C. Use a third queue manager distributed with two network servers using multi-instancing (active/passive).D. Use a third and fourth queue manager with MQ clustering on two network servers (active/active).



QUESTION 101A WebSphere Message Broker V6 has been used in a financial company on an AIX system in productionenvironment for years. The broker is configured for high availability and failover using Power HA (HACMP). Thecomponents in the resource group include the broker and its queue manager. The company plans to create anew WebSphere Message Broker V7 environment and migrate the existing broker to the V7 system with thesame business requirements. An administrator is asked to review and provide a design proposal for the highavailability and failover in the WebSphere Message Broker V7 system. What should the administratorrecommend?

A. Keep using the existing HA solution.B. Use a multi-instance broker to replace the current HA solution.C. Convert an existing broker to a multi-instance broker using the mqsichangebroker command.D. Create custom scripts to check the health of the broker and trigger a failover when the broker failure is

detected.



QUESTION 102A WebSphere Message Broker V6 has been used in a financial company on an AIX system in productionenvironment for years. The broker is configured with a high availability solution. The components in theresource group include both the broker and a client application database. The company plans to create a newWebSphere Message Broker V7 environment and migrate the existing broker to the V7 system with the samebusiness requirements. An administrator is asked to review and provide a design proposal for the highavailability and failover in the WebSphere Message Broker V7 system. Which of the following options should

the administrator recommend?

A. Keep using the existing high availability solution.B. Use a multi-instance broker to replace the current high availability solution.C. Convert an existing broker to a multi-instance broker using the mqsichangebroker command.D. Create custom scripts to check the health of the broker and trigger a failover when the broker failure is

detected.




IBM WMB V7.0, System Admin By Dhruv · 2019-11-02 · Version 6.0 to WebSphere Message Broker...

Documents

Transcript of IBM WMB V7.0, System Admin By Dhruv · 2019-11-02 · Version 6.0 to WebSphere Message Broker...