[1]

[2]

INDEX

CONTENTS Page No.

1. gqhfynk ns/ ckow GoB pko/ gzikph ftZu ikDekohgqhfynk ns/ ckow GoB pko/ gzikph ftZu ikDekohgqhfynk ns/ ckow GoB pko/ gzikph ftZu ikDekohgqhfynk ns/ ckow GoB pko/ gzikph ftZu ikDekoh 4-18

2. INTRODUCTION 19

3. OVERVIEW OF THE EXAMINATION 19

4. NUMBER OF VACANCIES 19

5. CATEGORY WISE BREAK UP OF VACANCIES 20

6. ELIGIBILITY CONDITIONS 21-22

a) Educational Qualification 21

b) Age Limit 21

c) Number of Attempts at the examination 22

d) Nationality 22

7. PLAN FOR PRELIMINARY COMPETITIVE EXAMINATION 23-25

a) How to apply 23

b) How to pay Examination fee 23

c) Submission of Application form 24

d) Admit Card 25

8. INELIGIBILITY CONDITIONS 25

9. DISCIPLINARY ACTION 25-26

10. EXAMINATION CENTRES 26

11. INFORMATION REGARDING PAPER I & II 27

(OPTIONAL SUBJECTS)

12. SYLLABUS FOR PRELIMINARY EXAMINATION 28-70

(OBJECTIVE TYPE)

[3]

13. INSTRUCTIONS TO CANDIDATES REGARDING 71-78

FILLING UP OF OMR APPLICATION FORM FOR

PRELIMINARY EXAMINATION

a) General Instructions 71-73

b) Category code list 74

c) Age relaxation code list 74

d) State/U.T. Code list 75

e) Instructions regarding OMR form 76-78

14. PLAN FOR MAIN COMPETITIVE EXAMINATION 79-84

a) How to apply 83

b) Certificates to be submitted & their order of placement. 83

c) Examination Fee 84

d) Submission of Application form 84

15. SYLLABUS FOR MAIN EXAMINATION 85-191

(DESCRIPTIVE TYPE)

16. DEFINITIONS 192-195

17. SPECIMEN CERTIFICATES 196-198

18. SPECIMEN OMR SHEET 199-200

19. BLANK OMR SHEET WITH ENVELOPE

[4]

The Public Service Commission occupies a pivotal place of importance in the State and

the integrity and efficiency of the State's administrative apparatus depends considerably on the

quality of the selections made by the Public Service Commission. It is absolutely essential that

the best and finest talent should be drawn in the administration and administrative services

must be composed of men who are honest, upright and independent.

COST OF INFORMATION BROCHURE-CUM-PRELIMINARY APPLICATION FORM

At Counter Rs. 500/-

By Post Rs. 560/-

EXAMINATION FEE

� Preliminary Competitive Examination Rs. 1500/-

Scheduled Castes and Backward Classes (Punjab) Rs. 375/-

Ex-servicemen of Punjab No fee to be paid.

� Main Competitive Examination Rs. 2000/-

Schedules Castes and Backward Classes (Punjab) Rs. 500/-

Ex-servicemen of Punjab No fee to be paid.

Note: (1) The Brochure should be retained by the Applicant/Candidate till the completion of the process.

Note: (2) The application form for the Main Examination shall be provided after the declaration of result of the Preliminary examination.

[5]

gzikp b'e ;/tk efw;aB dk oki ftZu fJZe wjZstg{oB ;EkB j? ns/ oki dh gq;ak;eh

w;ahBoh dh nyzvsk ns/ ekoie[;absk nfjw s"o s/ gzikp b'e ;/tk efw;aB tb'A r[DtZsk d/

nkXko s/ ehsh rJh u'D s/ fBoGo j? . fJj w[ezwb o{g ftZu iao{oh j? fe gq;ak;aB ftZu ;G s'A

tXhnk ns/ gqfsGktkB ftneshnK B{z fbnKdk ikt/ ns/ gq;ak;fBe ;/tktK ftZu fJwkBdko,

fBogZy ns/ fdnkBsdko ftneshnK B{z jh fbnKdk ikt/ .

fJBcow/;aB (;{uBk) po';ao^ew nkozGe noiah ckow dh ehwsfJBcow/;aB (;{uBk) po';ao^ew nkozGe noiah ckow dh ehwsfJBcow/;aB (;{uBk) po';ao^ew nkozGe noiah ckow dh ehwsfJBcow/;aB (;{uBk) po';ao^ew nkozGe noiah ckow dh ehws

ekT{ANo s/ 500$^ o[gJ/

vke okjhA 560$^ o[gJ/

gqhfynk ch;gqhfynk ch;gqhfynk ch;gqhfynk ch;

nkozGe w[ekpb/ dh gqhfynk 1500$^ o[gJ/

nB[;{fus ikshnK ns/ gSVhnK Pq/DhnK,gzikp 375$^ o[gJ/

;kpek ca"ih,gzikp e'Jh ch; BjhA

w[yw[yw[yw[y w[ekpb/ dh gqhfynk w[ekpb/ dh gqhfynk w[ekpb/ dh gqhfynk w[ekpb/ dh gqhfynk 2000$^ o[gJ/

nB[;{fus ikshnK ns/ gSVhnK Pq/DhnK,gzikp 500$^ o[gJ/

gzikp d/ ;kpek c"aih e'Jh ch; BjhA

B'NL (1) noiah eosk$T[whdtko B{z fJj po';ao,gqhfynk dh ;koh gqfefonk ysw j'D sZe

nkgD/ e'b oZyDk ukjhdk j?.

B'NL (2) nkozGe gqhfynk dk Bshik x'f;as j'D s'A pknd jh w[y gqhfynk bJh noiah cakow

fdZsk ikt/rk.

[6]

ikD gSkDikD gSkDikD gSkDikD gSkD

;z:[es gzikp b'e ;/tk efw;aB i' fe gzikp b'e ;/tk efw;aB dk gfjbk BK ;h, fi; dk nkd/;a

y?po dZo/ s'A fdZbh B/V/ iwBk sZe ubdk ;h, dh ;EkgBk bkj"o ftZu fJZe wJh, 1937 B{z j'Jh

;h. d/;a tzv T[gozs gzikp b'e ;/tk efw;aB cotoh, 1948 B{z f;awb/ fty/ w[V j'Ad ftZu

nkfJnk, dk ;z;a'Xs nfXeko y/so e/tb T[; ;w/A d/ g{oph gzikp gqKs sZe ;hws ;h. gzikp

ns/ g?g;{ okiK d/ ftbhB j'D T[gozs fJj gfNnkb/ ubk frnk ns/ j[D fJ; d/ nfXeko y/so

ftZu g?g;{ gpfbe ;oft; efw;aB th ;akfwb ;h. pknd ftZu 1966 ftZu gzikp oki d/

g[Bo^;zrmB d[nkok fJ; dhnK jZdK fJ; w[skfpe S'NhnK eo fdZshnK rJhnK .

gzikp oki f;tb ;/tktK ;KMgzikp oki f;tb ;/tktK ;KMgzikp oki f;tb ;/tktK ;KMgzikp oki f;tb ;/tktK ;KM//// w[ekpb/ dh gqhfynk, 2009 w[ekpb/ dh gqhfynk, 2009 w[ekpb/ dh gqhfynk, 2009 w[ekpb/ dh gqhfynk, 2009

gzikp b'e ;/tk efw;aB d[nkok gzikp oki f;tb ;/tktK dh Gosh bJh ;KM/ w[ekpb/ dh gqhfynk

gfNnkbk fty/ ;kb 2009 ftZu eotkJh ikt/rh.

gqhfynk brksko d' GkrK ftZu j't/rhL

i) nkozGe w[ekpb/ dh gqhfynkL ns/

ii) w[y (w/B) w[ekpb/ dh gqhfynk (fbysh ns/ w"fye)

gqhfynk d/ ;pzX ftZu iao{oh rZbKgqhfynk d/ ;pzX ftZu iao{oh rZbKgqhfynk d/ ;pzX ftZu iao{oh rZbKgqhfynk d/ ;pzX ftZu iao{oh rZbK

1) fB:w 13^J/ d/ T[gfB:w (1) d/ sfjs, gzikp ;oeko d[nkok fBoXkos e[b n;kwhnK d/

13 r[DK T[whdtkoK B{z w[y gqhfynk ftZu ;akfwb ehsk ikt/rk.

2) nkozGe w[ekpb/ dh gqhfynk ftZu T[whdtko i' nkg;aBb ft;ak b?Dk ukj[zdk j?, nkgDh

noaih ftZu nzfes eo/rk.

3) id'A sZe j'ot/A jdkfJs Bk ehsh ikt/ fJe T[whdtko g/go dk T[so nzro/iah wkfXnw iK

gzikph wkfXnw ftZu d/t/rk.

4) e'Jh th T[whdtko w[y w[ekpb/ dh gqhfynk ftZu nghno j'D bJh T[d'A sZe gkso BjhA

j't/rk id'A sZe T[j d't/A g/goK d/ e[b i'V dk 45 gqsh;as Bzpo jk;b BjhA eo b?Adk, jo/e

ft;a/ ftZu xZN' xZN 40 gqsh;as Bzpo j'D/ ukjhd/ jB.

5) T[whdtko tb'A gqhfynk ftZu jk;b ehs/ Bzpo fi; nkXko s/ T[; B{z w[y w[ekpb/ dh

gqhfynk ftZu dkyab ehsk ikDk j?, B{z efw;aB d[nkok pDkJh ikD tkbh ckJhBb w?foN ftZu

BjhA frfDnk ikt/rk .

[7]

6) T[whdtkoK tb'A gq;aBK d/ T[so nkgNheb wkoe; ohvo (UHn?wHnkoH) ;ahN s/ fdZs/

ikDr/.

7) ;kpek c"aih T[whdtkoK B{z f;oc iBob ;NZvhia d/ g/go ftZu jh nghno j'D dh b'V j?.

;kpek c"aihnK dh tz;ars ;zskB Bkb ;pzXs (n?bHvhHJhHn?;Hn?wH) e?N/roh T[whdtkoK B{z

;ko/ g/go ;w/s nkg;aBb g/goK ftZu nghno j'Dk iao{oh j?.

n;kwhnKn;kwhnKn;kwhnKn;kwhnK

gqhfynk d/ Bshi/ d/ nXko s/ GohnK ikD tkbhnK n;kwhnK dh frDsh fBwB nB[;ko j?L^

bVh BzLbVh BzLbVh BzLbVh BzL n;kwh dkn;kwh dkn;kwh dkn;kwh dk BK BK BK BK n;kwhnK dh frDshn;kwhnK dh frDshn;kwhnK dh frDshn;kwhnK dh frDsh

1H gzikp f;tb ;oft; (ekoiekoh ;akyk) 38

2H fvgNh ;[govzN nkca g[fb; 18

3H nkpekoh s/ eo nc;o 37

4H sfj;hbdko 06

5H y[oke ;gbkJh ns/ ygseko wkwb/ nc;o 05

6H pbke ftek; ns/ gzukfJs nc;o 15

7H ;jkfJe ofi;Noko ;fjekoh ;GktK 08

8H feos ns/ ;[bQk^;ckJh nc;o 03

9H o'iarko f;oiB ns/ f;ybkJh nc;o 13

eZ[b 143143143143

n;kwhnK dh frDsh fpBK fe;/ B'fN; s'A tXkJh xNkJh ik ;edh j?. n;kwhnK dk

okytKeoD gzikp ;oeko d[nkok fBoXkos ehs/ nB[;ko jh j't/rk.

B'NB'NB'NB'NL^ e/tb gzikp d/ t;Bhe ;kpek c"aih$;kpek ca"ihnK dh tz;ars ;zskB (LDESM) T[whdtko

jh ;kpek c"aih tor bJh okyt/AeoD bJh gkso jB.

[8]

;KM/ w[ekpb/ dh gqhfynk d/ Bshi/ d/ nkXko s/ GohnK ikD tkbhnK n;kwhnK dh e?N/roh

nB[;ko frDsh fBwB nB[;ko j?L^

bVh bVh bVh bVh BzLBzLBzLBzL

n;kwh dk BKn;kwh dk BKn;kwh dk BKn;kwh dk BK iBobiBobiBobiBob

JhHn?;H JhHn?;H JhHn?;H JhHn?;H n?wH$ n?wH$ n?wH$ n?wH$ n?bHvhH n?bHvhH n?bHvhH n?bHvhH JhHn?;HJhHn?;HJhHn?;HJhHn?;Hn?w, n?w, n?w, n?w, gzikpgzikpgzikpgzikp

fyvkoh fyvkoh fyvkoh fyvkoh gzikpgzikpgzikpgzikp

;ohoe ;ohoe ;ohoe ;ohoe s"o s/ s"o s/ s"o s/ s"o s/ ngzr ngzr ngzr ngzr ftnesh ftnesh ftnesh ftnesh gzikpgzikpgzikpgzikp

nB[;{^ nB[;{^ nB[;{^ nB[;{^ fus fus fus fus iksh, iksh, iksh, iksh, gzikpgzikpgzikpgzikp

nB[;{^ nB[;{^ nB[;{^ nB[;{^ fus fus fus fus iksh iksh iksh iksh JhHn?;HJhHn?;HJhHn?;HJhHn?;Hn?wH n?wH n?wH n?wH gzikpgzikpgzikpgzikp

nB{̂ nB{̂ nB{̂ nB{̂ ;{fus ;{fus ;{fus ;{fus iksh iksh iksh iksh n?;H n?;H n?;H n?;H ghH ghH ghH ghH gzikpgzikpgzikpgzikp

ppppkbwhekbwhekbwhekbwhehhhh$wijp$wijp$wijp$wijph h h h f;Zy, f;Zy, f;Zy, f;Zy, gzikpgzikpgzikpgzikp

ppppkbwhehkbwhehkbwhehkbwheh$wijph $wijph $wijph $wijph f;Zy f;Zy f;Zy f;Zy

JhHn?;HJhHn?;HJhHn?;HJhHn?;Hn?w, n?w, n?w, n?w, gzikpgzikpgzikpgzikp

ppppkbwheh kbwheh kbwheh kbwheh $wijph $wijph $wijph $wijph f;Zy f;Zy f;Zy f;Zy

n?;Hgh, n?;Hgh, n?;Hgh, n?;Hgh, gzikpgzikpgzikpgzikp

phHphHphHphH

;h ;h ;h ;h gzLgzLgzLgzL

phH phH phH phH ;hH ;hH ;hH ;hH JhH JhH JhH JhH n?;H n?;H n?;H n?;H n?wH n?wH n?wH n?wH gzHgzHgzHgzH

e[be[be[be[b

1

gzikp f;tb ;oft;

(ekoiekoh ;akyk)

17 2 1 1 4 1 1 4 - - 6 1 38

2 fvgNh

;[govzN nkc g[fb;

9 1 - - 2 1 - 2 - - 3 - 18

3 nkpekoh s/

eo nc;o

18 3 1 2 4 1 - 4 - - 3 1 37

4 sfj;hbdko 03 - - 1 - - - - 1 - 1 - 06

5

y[oke ;gbkJh ns/ ygseko

wkwb/ nc;o

02 - - - 1 1 - - - - 1 - 05

6 pbke ftek; ns/ gzukfJs nc;o

08 1 - - 1 1 - 1 - 1 2 - 15

7

;jkfJe ofi;Noko ;fjekoh ;GktK

03 1 - - 1 1 - 1 - - 1 - 08

8 feos ns/ ;[bkQ^ ;ckJh nc;o

01 1 - - 1 - - - - - - - 03

9

o'irko f;oiB ns/ f;ybkJh nc;o

06 1 - - 2 - - 2 - - 2 - 13

E[b 67 10 2 4 16 6 1 14 1 1 19 2 143

B'NL JhHn?;Hn?wH$ n?bHvhHJhHn?;Hn?wH, gzikp s'A Gkt ;kpek c"aih$ ;kpek c"aihnK dh tz;ars ;zskB, gzikp nB[;{fus iksh JhHn?;Hn?wH, gzikp s'A Gkt nB[;{fus iksh ;kpek ca"ih, gzikp nB[;{fus iksh n?;HghH, gzikp s'A Gkt nB[;{fus iksh fyvkoh, gzikp pkbwheh$ wijph f;Zy JhHn?;Hn?wH, gzikp s'A Gkt pkbwheh$ wijph f;Zy ;kpek c"aih, gzikp phH;hH, gzikp s'A Gkt gZSVh Pq/DhnK, gzikp phH;hH JhHn?;Hn?wH, gzikp s'A Gkt gZSVh Pq/DhnK ;kpek c"aih, gzikp

[9]

gksosk dhnK ;aosKgksosk dhnK ;aosKgksosk dhnK ;aosKgksosk dhnK ;aosK 1H1H1H1H ftfdne :'rskftfdne :'rskftfdne :'rskftfdne :'rsk

T[whdtko B/ fe;/ th wkBsk gqkgs :{Bhtof;Nh iKiKiKiK ;z;Ek s'A fe;/ th y/so ftZu ;Bkse

fvroh jk;b ehsh j't/ .

p;aos/ fe T[BQK T[whdtkoK B{z th nkozGe gqhfynk ftZu p?mD dh nkfrnk j't/rh, i'

T[whdtko nkgDh fvroh dh gVQkJh eo oj/ jB, gqzs{ T[whdtko w[y gqhfynk ftZu nghno j'D

bJh sd jh gkso j'Dr/ i/ T[j nkgDh fvroh T[;/ ;kb ftZu w[ezwb j'D ;pzXh ;p{s g/;a

eoBr/ .

2H e'Jh th T[whdtko nkozGe gqhfynk ftZu nghno j'D bJh T[d'A sZe gkso BjhA j't/rk id'A

sZe T[j d;thA dh gqhfynk ftZu gzikph fJZe iao{oh ft;a/ iKiKiKiK u'Dt/A ft;a/ d/ s"o s/ iKiKiKiK fJ; d/

pokpo dh gqhfynk gzikph Gk;ak ftZu gk; BjhA eo b?Adk, i'fe ;w/A^;w/A f;o ;oeko d[nkok

fBoXkos ehsh rJh j't/.

ftnkfynk L^ fJ; fB:w ftZu "wkBsk gqkgs :{Bhtof;Nh" iK iK iK iK

";z;Ek" dk T[jh noE j't/rk, fit/A fe gzikp f;tb

;/tktK (iBob ns/ ekwB ezvh;aBia ;/tk fB:w)

1994 ftZu fdZsk frnk j? .

iao{oh B'NL T[whdtko fiBQK B/ gzikp g[fb; ;oft; th u[Dh j? ns/ w[y w[ekpb/ dh gqhfynk e[nkbhckJh eo bJh j?, B{z fciaheb N?;N e[nkbhckJh eoBk j't/rk . T[whdtko B{z j/m fby/ ;ohoe wkgdzvK B{z g{ok eoBk iao{oh j?L^

xZN'^xZN T[ZukJhxZN'^xZN T[ZukJhxZN'^xZN T[ZukJhxZN'^xZN T[ZukJh Sksh dk wkgSksh dk wkgSksh dk wkgSksh dk wkg

nkdwhnkdwhnkdwhnkdwh !!!!n"osKn"osKn"osKn"osK n;kwh dk BKn;kwh dk BKn;kwh dk BKn;kwh dk BK nkdwhnkdwhnkdwhnkdwh n"osKn"osKn"osKn"osK

fpBfpBfpBfpBK c[bkJ/K c[bkJ/K c[bkJ/K c[bkJ/ c[bk e/c[bk e/c[bk e/c[bk e/

fvgNh ;[govzN g[fb; 5'-7" 5'-3" 33" 341" 2 -

!!!!n"os T[whdtkoK tk;s/ Sksh d/ wkg dh ;aos bkr{ BjhA j? .

[10]

2H2H2H2H T[wo ;hwkT[wo ;hwkT[wo ;hwkT[wo ;hwk

(T) efw;aB d/ dcaso fty/ noiahnK gj[zuD dh nkyoh fwsh fi; ;kb ftZu nkT[Adh j't/, dh gfjbh iBtoh B{z T[whdtko dh xZN'^xZN T[wo 21 ;kb ns/ tZX s'A tZX 35 ;kb j'Dh ukjhdh j? .

(i) go ;aos fJj j? fe gzikp g[fb; ;oft; tkb/ T[whdtkoK d/ e/; ftZu fit/A fe T[Zgo

do;kfJnk frnk j?, ;kb dh gfjbh iBtoh B{z xZN'^xZN T[wo 21 ;kb ns/ tZX s'A tZX

T[wo ;hwk 28 ;kb j'Dh ukjhdh j? .

(ii) go ;aos fJj j? fe fvgNh ;[govzN g[fb; dh nk;kwh bJh nB[;{fus iksh ns/

gZSVhnK Pq/DhnK, gzikp Bkb ;pzXs T[whdtkoK B{z gzikp ;oeko d[nkok ikoh jdkfJsK

nB[;ko T[wo ftZu gzi ;kb sZe dh S'N j't/rh .

(n) gzikp ;oeko d/ eowukoh, ;w/s e'oNK, fiBQK B/ ;oeko nXhB xZN'^xZN uko ;kb

brksko ;/tk g{oh eo bJh j?, B{z T[gobh T[wo ;hwk ftZu 45 ;kb sZe S'N j't/rh .

(J) T[go'es do;kJh T[gobh T[wo ;hwk ftZu ;ko/ okiK dhnK nB[;{fus ikshnK ns/

nB[;{fus ephfbnK ns/ gzikp dhnK gZSVh Pq/DhnK d/ T[whdtkoK B{z tZX s'A tZX gzi ;kb

dh S'N j't/rh .

(;) gzikp dhnK ftXtktK, sbkeP[dk ns/ nfijhnK j'o yk; torK dhnK n"osK B{z T[gobh

T[wo ;hwk ftZu ukbh ;kb sZe S'N j't/rh .

(j) gzikp d/ ;ohoe s"o s/ ngzr T[whdtkoK B{z T[gobh T[wo ;hwk ftZu 10 ;kb sZe S'N

j't/rh .

(e) gzikp d/ ;kpek c"aih nkgD/ e/Ado d/ oZfynk pbK ftZu ehsh nkgDh ;/tk d/ ;w/A B{z nkgDh

n;b T[wo ftZu'A xNk e/ ns/ i/ BshisB T[wo ftZu fszB ;kb iwQK eoe/, T[wo ;hwk

;/tk fB:wK ftZu fJ; nk;kwh ftZu f;ZX/ s"o s/ Gosh j'D bJh fB;afus T[wo ;hwk s'A tZX

BjhA j[zdh sK T[j T[wo ;hwk ;pzXh ;aosK B{z g{ok eodk ;wfMnk ikt/rk .

[11]

3H3H3H3H gqhfynk bJh w"fenK dh frDshgqhfynk bJh w"fenK dh frDshgqhfynk bJh w"fenK dh frDshgqhfynk bJh w"fenK dh frDsh

(T) fJjBK fB:wK d/ j'Ad ftZu nkT[D T[gozs jo/e T[whdtko B{z gqhfynk ftZu nghno j'D

bJh uko w"e/ fdZs/ ikDr/ id'A sZe ;oeko tZb'A fJ; ;pzX ftZu ;w/A ;w/A s/ S'N d/D bJh

e'Jh B'Nhfce/;aB ikoh BjhA ehsh iKdh .

ftnkfynk L^ fJ; fB:w d/ wzst bJh i/eo T[whdtko nkozGe gqhfynk

ftZu fJZe tko nghno j' iKdk j? sK T[; tZb'A fbnk

frnk fJj w"ek gqhfynk d/ w"e/ ti'A s;Zto ehsk ikt/rk .

(n) gzikp ;oeko dk eowukoh, ;w/s e'oNK, fijVk fe j'ot/A :'r j't/, ns/ fi; dh efw;aB

fty/ noiahnK gj[zuD dh nkyoh fwsh B{z brksko uko ;kb s'A xZN ;/tk Bk j't/ ns/ fi;

B/ T[BQK s'A fJbktk fszB w"fenK dk bkG Bk T[mkfJnk j't/ fijV/ fe T[j fe;/ j'o ;woZEk

ftZu b? ;edk ;h, T[j fJ; e?N/roh nXhB ngbkJh eoB d/ :'r j?.

(J) ;kpek c"aih tor Bkb ;pzXs T[whdtkoK B{z gqhfynk ftZu nghno j'D bJh f;oca fszB

w"e/ fdZs/ iKd/ jB .

4H e"whnse"whnse"whnse"whns

T[whdtko L^

(T) Gkos dk Bkrfoe j't/l iKiKiKiK

(n) B/gkb dk Bkrfoe j't/l iKiKiKiK

(J) G{NkB dh goik j't/l iKiKiKiK

(;) nfijk fsZpsh ;aoBkoEh j't/, fijVk Gkos ftZu gZe/ s"o s/ t;D d/ fJokd/ Bkb

1 iBtoh, 1962 s'A gfjbK Gkos ftZu nk frnk j't/; iK

(j) w{b o{g ftZu nfijk Gkosh j't/, fijVk Gkos ftZu gZe/ s"o s/ t;D d/ fJokd/ Bkb

gkfe;skB, powk, ;qhbzek ns/ ehBhnk, :{rKvk d/ g{oph ncoheh d/;aK ns/ sBiakBhnk d/

;z:[es rDoki (fi; B{z gfjbK *NKrkBhek* ns/ *izaiahpko* fejk iKdk ;h) iKphnk,

wkbth, ia?o/, fJE'ghnk ns/ thnsBkw s'A gotk; eoe/ nkfJnk j't/ .

go ;aos fJj j? fe e?N/roh (n), (J), (;), (j) Bkb ;pzX oZydk T[whdtko e/tb T[;

ftnesh B{z ;wfMnk ikt/rk fi; bJh gzikp ;oeko (rqfj wkwb/ ns/ fBnK ftGkr) tZb'A

gksosk ;oNhfce/N fdZsk frnk j? .

[12]

nkozGe w[ekpb/ dh gqhfynk bJh ftT[AsnkozGe w[ekpb/ dh gqhfynk bJh ftT[AsnkozGe w[ekpb/ dh gqhfynk bJh ftT[AsnkozGe w[ekpb/ dh gqhfynk bJh ftT[As

ngbkJh fet/A eoBk j?L^

i) nkozGe w[ekpb/ dh gqhfynk bJh noiahnK gfjbK jh sfj ehsh fBoXkos UHn?wHnkoH

(pre-folded O.M.R.) noiah ckow s/ G/ihnK ikD. fJzBcow/;aB po';ao Bkb gfjbK fby/

gs/ tkb/ fbcakca/ ftZu fBoXkos UHn?wHnkoH noiah ckow T[whdtkoK B{z G/fink iKdk j? i'

fe T[whdtkoK tZb'A nkgD/ jZE Bkb Gfonk ikt/. UHn?wHnkoH ckow d/ ckow?N ftZu Goh

rJh noiah ftukoh BjhA ikt/rh. feqgk eoe/ noiah ckow GoB s'A gfjbK gzBk 76^78 s/

fdshnK jdkfJsK B{z gfVQnk ikt/ ns/ gzBk 199^200 s/ UHn?wHnkoH noiah ckow d/ Go/

j'J/ Bw{B/ B{z t/fynk ikt/. ckow ezfgT{NokJhiav f;;Nw okjhA u?e ehsk ikt/rk fJ; bJh

T[whdtkoK B{{z fXnkB oZyDk ukjhdk j? fit/ fe jdkfJsK ftZu ftnkfynk ehsh rJh j?, d/

nB[;ko ckow ftZu ;ko/ ekbw mhe Go/ ikD .

ii) T[whdtkoK B{z fJ; gZXo s/ nkgD/ noiah ckow Bkb T[wo ns/ ftfdne :'rsk

d/ eb/w ;pzXh e'Jh ;oNhfce/N G/iD dh b'V BjhA . fiBQK dh SkD phD f;oc w[y w[ekpb/

dh gqhfynk d/ ;w/A jh ehsh ikt/rh. fJ; bJh feqgk eoe/ nfij/ ;oNhfce/N nkgD/

UHn?wHnkoH noiah ckow Bkb fe;/ jkbs ftZu Bk G/i/ ikD. fJBQK dh fJ; gZXo s/ b'V

BjhA j?.

iii) T[whdtko i' gqhfynk bJh ngbkJh eo oj/ jB, B{z :ehBh pDkT[Dk ukjhdk j? fe T[j

gqhfynk ftZu nghno j'D bJh :'rsktK ;pzXh ;aosK g{ohnK eod/ jB. gqhfynk ftZu

nghno j'D bJh ;ko/ gZXoK s/, fiBQK ftZu efw;aB d[nkok T[BK B{z dkyab ehsk iKdk j?,

nkozGe w[ekpb/ dh gqhfynk, w[y w[ekpb/ dh gqhfynk ns/ w"fye N?;N, fBoXkos gksosk

dhnK ;aosK g{ohnK eoB dh ;aos sfjs gq'thiaBb j't/rk. i/eo SkDphD eod/ ;w/A fe;/

gZXo s/ fJj gkfJnk frnk fe T[j gksosk ;pzXh e'Jh ;aos g{oh BjhA eod/ sK gqhfynk

bJh T[BK dh T[whdtkosk oZd eo fdZsh ikt/rh. n?vfwN ekov ikoh j'D dk fJj wsbp

BjhA fe T[whdtko dh gksosk B{z efw;aB tb'A nzfsw s"o s/ wzB fbnk frnk j? iK

T[whdtko tb'A nkgD/ noiah ckow ftZu fdZsh rbs iK ;jh ;{uBk B{z efw;aB tb'A ;theko

eo fbnk frnk j?. T[whdtkoK tb'A w[y w[ekpb/ dh gqhfynk e[nkbhckJh eoB T[gozs

efw;aB n;b d;skt/iK Bkb SkDphD eo/rk. id'A sZe T[whdtko dh gksosk efw;aB tb'A

gZe/ s"o s/ wzBh Bk ikt/, T[; ;w/A sZe fJj gq'thiaBb s"o s/ j't/rh . T[whdtko dh

[13]

gksosk ;pzXh iKiKiKiK gqhfynk ftZu nghno eotkT[D ;pzXh efw;aB dk c?;bk nzfsw

j't/rk .

iv) ;ko/ T[whdtko Gkt/A fe T[j gfjbK jh ;oekoh ;/tk ftZu j'D iKiKiKiK noX ;oekoh ndkfonK

ftZu j'D iKiKiKiK fJ; soQK d/ j'o ;zrmBK ftZu j'D iKiKiKiK gqkJht/N B"eoh ftZu j'D, B{z nkgD/

noiah ckow f;ZX/ efw;aB B{z G/iD/ ukjhd/ jB ns/ gqhfynk ftZu nghno j'D bJh nkgD/

fB:[esheko B{z ;{fus eoBk ukjhdk j? . i/ e'Jh T[whdtko nzfsw fwsh s'A gfjbK nkgD/

fB:[esheko B{z noiah G/idk j? ns/ fB:[esheko noiah gj[zuD dh nkyoh fwsh s'A gfjbK

T[j noiah efw;aB B{z BjhA G/idk j? ns/ efw;aB d/ dcso fty/ noiah b/N gj[zudh j? sK

efw;aB fJ; B{z ;theko BjhA eo/rk .

[14]

gqhfynk cah; dh ndkfJrh fet/A eoBh jgqhfynk cah; dh ndkfJrh fet/A eoBh jgqhfynk cah; dh ndkfJrh fet/A eoBh jgqhfynk cah; dh ndkfJrh fet/A eoBh j????

nkozGe w[ekpb/ dh gqhfynk ftZu nghno j'D bJh T[whdtko B{z 1,500$^ o[gJ/ (e/tb fJZe

jiako gzi ;' o[gJ/) cah; ti'A efw;aB B{z ndkfJrh eoBh j't/rh .

(T) ;ko/ okiK dhnK nB[;{fus iksh tor Bkb ;pzXs ns/ gzikp d/ gZSVhnK Pq/DhnK Bkb

;pzXs T[whdtkoK B{z gqhfynk cah; ti'A 375$^ o[gJ/ (e/tb fszB ;" guZso o[gJ/) dh

ndkfJrh eoBh j't/rh .

(n) f;oca gzikp d/ t;Bhe ;kpek c"aihnK B{z gqhfynk cah; dh ndkfJrh s'A S'N j? .

(J) ;kpek c"aihnK d/ tz;ars ;zskB dh e?N/roh Bkb ;pzXs T[whdtkoK B{z b'VhAdh gqhfynk cah;

dh ndkfJrh eoBh j't/rh.

B'NB'NB'NB'N L^ L^ L^ L^ i' T[whdtko gqhfynk cah; s'A S'N$ w[nkcah d/ jZedko jB, B{z nkgDh UHn?wHnkoH noiah

ckow Bkb cah; ftZu bJh ikD tkbh S'N d/ eb/w ti'A ;oNhfce/N dh s;dheP[adk ekgh oZyDh

iao{oh j? (;N?gb Bk ehsk ikt/) .

T[dkjoD ti'A ;kpek c"aih tor Bkb ;pzXs T[whdtko B{z ;kpek c"aih tor Bkb ;pzXs

j'D ;pzXh ;oNhfce/N dh ekgh G/iDh iao{oh j? . nfij/ ;oNhfce/NK dhnK Bw{Bk ekghnK ns/

nfij/ ;oNhfce/N ikoh eoB tkb/ ;woZE nfXekohnK d/ BK po';ao ftZu fdZs/ rJ/ jB . T[j

;pzXs T[whdtko i' nfij/ ;oNhfce/NK dhnK ekghnK BjhA G/id/, fe;/ th jkbs ftZu cah; ftZu

fwbD tkbh S'N$ w[nkcah d/ jZedko BjhA j'Dr/ .

gqhfynk cah; w[ezwb noiah ckow Bkb n;b eok;v p?Ae vokcN d[nkok ;eZso, gzikp

b'e ;/tk efw;aB d/ BK s/ G/ih ikt/ i' fe gfNnkbk fty/ ndkfJrh :'r j't/ . gqwkDe p?Ae

vhwKv vokcN iKiKiKiK nX{oh gqhfynk cah; s'A fpBQK gqkgs j'Jh noiah B{z f;ZX/ s"o s/ oZd eo fdZsk

ikt/rk . fdZsh rJh gqhfynk cah; tkfg; BjhA j't/rh . T[whdtkoK B{z p?Ae vhwKv vokcN d/

fgSb/ gk;/ w'N/ nZyoK ftZu nkgDk po';ao Bzpo, Bkw ns/ gsk fbyDk ukjhdk j? .

noiah ckow g/;a eoBknoiah ckow g/;a eoBknoiah ckow g/;a eoBknoiah ckow g/;a eoBk

i) noiahnK fBoXkos UHn?wHnkoH ckow s/ ;ko/ gZyK s'A w[ezwb, ;eZso, gzikp b'e ;/tk

efw;aB, pkoKdoh rkovBia, gfNnkbk^147001 gk; fwsh 28 d;zpo, 2009 B{z ;akw 5H00

ti/ s'A gfjbK gqhfynk cah; ;w/s gj[zuDhnK ukjhdhnK jB . noiah ckow vke okjhA G/i/

ik ;ed/ jB iKiKiKiK fBZih s"o s/ efw;aB d/ ;tkrsh ekT{ANo s/ th fdZs/ ik ;ed/ jB .

[15]

ii) gfjbK sfj ehs/ rJh UHn?wHnkoH noiah ckow B{z ;g?;ab fbcakca/ s/ gfjbK fby/ gs/ s/

fdZsk ikDk j? ns/ T[whdtko B{z fJ;/ fbcakca/ ftZu w[ezwb ckow G/iDk ukjhdk j? .

UHn?wHnkoH noiah ckow dhnK T[;/ soQK sfjnK bkJhnK ikD fit/A fe fJj fdZsk frnk

j?. fe;/ th jkbs ftZu e'Jh BthA sfj Bk bkJh ikt/ .

iii) UHn?wHnkoH noiah ckow Bkb e'Jh fgzB, ;N?gb g/;N iKiKiKiK N?r Bk brkfJnk

ikt/ . i/eo s[;hA fbcakca/ Bkb e'Jh gj[zu o;ahd BZEh iKiKiKiK ;N?gb eoBh j? sK feqgk eoe/

fJ; B{z fbcakca/ s/ do;kJh EK s/ brkfJnk ikt/ . fJj iao{oh j? feT[A i' noiah ckow dh

gqfeqnk ezfgT{No d[nkok ehsh ikDh j? .

T[whdtko B{z UHn?wHnkoH ckow dh ftuekobh sfj ftZu f;oca p?Ae vhwKv vokcN

ns/ gqhfynk cah; bJh S'N d/ eb/w ;pzXh ;p{s ti'A ;oNhfce/N, fiE/ Y[ZetK j't/, T[E/

oZyDk ukjhdk j? .

p?Ae vokcN ns/ eb/w d/ ;p{s ti'A ;oNhfce/N UHn?wHnkoH noiah ckow Bkb fgzB,

;N?gb, g/;N iKiKiKiK N?r Bk ehs/ ikD . e'Jh j'o ;oNhfce/N iKiKiKiK d;skt/iaK dh SkDphD f;oca

w[y w[ekpb/ dh gqhfynk ;w/A jh ehsh ikt/rh .

iv) T[whdtko B{z nkgDk noiah ckow mhe GoB bJh g{ok fXnkB oZyDk ukjhdk j? . e'Jh th

ekbw ykbh Bk SZfvnk ikt/ . nX{o/ iKiKiKiK rbs Go/ noiah ckow f;ZX/ s"o s/ oZd eo fdZs/

ikDr/ . oZd j'D ;pzXh fe;/ th jkbs ftZu e'Jh gqshp/Bsh BjhA ftukoh ikt/rh ns/ Bk jh

fJ; ;pzX ftZu e'Jh fbyk^gVQh ehsh ikt/rh .

v) T[whdtkoK B{z fJj fXnkB oZyDk ukjhdk j? fe T[BQK dk noiah ckow efw;aB d/ dcaso

ftZu d/oh Bkb gj[zuD bJh iKiKiKiK Bk gj[zuD bJh efw;aB fe;/ th ;{os ftZu fizaw/tko BjhA

j't/rk . fBoXkos nkyoh fwsh s'A pknd gqkgs j'Jh noiah B{z fe;/ th jkbs ftZu

ftukfonk BjhA ikt/rk ns/ ;kohnK b/N noiahnK f;ZX/ jh oZd eo fdZshnK ikDrhnK .

T[whdtko d[nkok noiah G/iD s'A pknd, nkgDh T[whdtkosk tkfg; b?D ;pzXh T[;

d[nkok gqkgs j'Jh gqsh^p/Bsh fe;/ th jkbs ftZu ;theko BjhA ehsh ikt/rh .

n?vfwN ekovn?vfwN ekovn?vfwN ekovn?vfwN ekov

i) T[whdtkoK B{z vke okjhA fJZe n?vfwN ekov G/fink ikt/rk i' fe T[BQK B{z gqhfynk jkb

ftZu nkgD/ Bkb fbnkT[Dk iao{oh j? . n?vfwN ekov Bkb Bk fbnkT[D dh ;{os ftZu T[BQK

B{z gqhfynk ftZu p?mD dh nkfrnk BjhA j't/rh .

[16]

ii) T[whdtkoK B{z n?vfwN ekov s/ do;kJh EK s/ nkgDh BthBsw gk;g'oN ;kJhia c'N'rokca

fugekT[Dh j't/rh i' fe riafNv nca;o d[nkok s;dhe ehsh j't/ . n?vfwN ekov s/ c'N'

B{z fgzB iKiKiKiK ;N?gb Bkb Bk fugekfJnk ikt/ . T[whdtko B{z c'N'rokca d/ ;kjwD/ gk;/

(Front Side) s/ nkgD/ j;skyo iao{o eoB/ ukjhd/ jB .

iii) T[whdtko B'N eoB fe T[j nkgD/ n?vfwN ekov s/ brkJh c'N' Bkb fwbdhnK fszB

gk;g'oN ;kJhia dhnK s;dhePa[dk c'N'nK w[y w[ekpb/ dh gqhfynk noiah ckow Bkb

G/iDr/ . fJj :ehBh pDkfJnk ikt/ fe gqhfynk dhnK ;kohnK ;N/iaK s/ T[BQK tZb'A G/ihnK

rJhnK ;kohnK c'N'nK ftZu nkg; ftZu fJe;kosk j't/ . i/eo SkDphD eod/ ;w/A fe;/

;N/ia s/ fJj gkfJnk frnk fe T[BQK tZb'A G/ihnK rJhnK c'N'nK ftZu fJe;kosk BjhA j? sK

T[BQK dh T[whdtkosk e?A;b eo fdZsh ikt/rh . n?vfwN ekov T[Zs/ d{ihnK uhiaK d/

Bkb^Bkb o'b Bzpo, gqhfynk ;?ANo, ;pi?eN nkg;aB ns/ gqhfynk dk NkJhwN/pb fdZsk

ikt/rk .

ngksosk ;ngksosk ;ngksosk ;ngksosk ;aosKaosKaosKaosK

j'o ;aosK d/ Bkb^Bkb j/m fbyhnK ;aosK T[whdtkoK B{z nkozGe w[ekpb/ dh gqhfynk bJh n:'r

pDk d/DrhnK L^

1H gqhfynk cah; g{oh Bk G/ih j't/l

2H gqhfynk cah; eok;v p?Ae vhwKv vokcN s'A fJbktk j'o sohfenK okjhA iwQK eotkJh j't/l

3H noiah ckow d/oh Bkb gj[zuDkl

4H noiah ckow ftZu fdZsh rJh rbs$ nX{oh ;{uBkl

5H gzikp b'e ;/tk efw;aB$ j'o efw;aBK d[nkok tofis (debarred) ehs/ T[whdtkol

6H :'rsktK ;pzXh ;aosK ftZu'A e'Jh th ;aos g{oh Bk eoBk, fi; ftZu T[wo ns/ ftfdne

:'rsktK ;akfwb jB .

nB[;ak;Bh ekotkJhnB[;ak;Bh ekotkJhnB[;ak;Bh ekotkJhnB[;ak;Bh ekotkJh

fJZe T[whdtko i' fe efw;aB tZb'A d';ah x'f;as ehsk frnk j? L^

i) nkgDh T[whdtkosk bJh j/m fby/ sohfenK okjhA wdd gqkgs eodk j?l

(T) r?o ekB{zBh sohfenK okjhA fo;ats fdzdk j?l iKiKiKiK

(n) fe;/ fe;w dk dpkn gkT[Adk j?l

[17]

(J) gqhfynk eotkT[D Bkb ;pzXs fe;/ ftnesh B{z pb?ew/b eodk j? iKiKiKiK pb?ew/b eoB

dh Xweh fdzdk j?l iKiKiKiK

ii) fe;/ d{i/ dk o{g Xkodk j?l

iii) X'y/ Bkb fe;/ d{i/ B{z nkgDh EK s/ g/;a eodk j?l iKiKiKiK

iv) M{m/ iKiKiKiK rbs d;skt/ia g/;a eodk j?l iKiKiKiK

v) nfij/ fpnkB fdzdk j? i' rbs iKiKiKiK M{m/ j'D iKiKiKiK e'Jh ;{uBk S[gkT[Adk j?l iKiKiKiK

vi) gqhfynk bJh nkgDh T[whdtkosk Bkb ;pzXs fBwBfbys sohfenK dk ;jkok b?Adk j? L^

(T) n:'r sohfenK okjhA gq;aB gZso dh ekgh gqkgs eodk j?l iKiKiKiK

(n) gqhfynk d/ r[gs ezw Bkb ;pzXs ftneshnK d/ t/oftnK ;pzXh ;{uBk gqkgs eodk

j?l

(J) gqhfynktK s/ dpkn gkT[Adk j?l iiiiKKKK

vii) gqhfynk d"okB rbs sohfenK dh tos'A eodk j?l iKiKiKiK

viii) T[so gZsoh ftZu n;abhb rZbK fbydk j? iKiKiKiK n;abhb o/yk fuZso (sketch) pDkT[Adk j?l

ix) gqhfynk jkb ftZu p[ok ;b{e eodk j?, fi; ftZu T[so gZsoh gkVBk, Bkb d/ ;kEhnK B{z

gqhfynk dk pkJhekN eoB ;pzXh GVekT[Adk j? iKiKiKiK rVpV g?dk eoB tkbk wj"b g?dk

eodk j?l iKiKiKiK

x) efw;aB tZb'A gqhfynk bJh brkJ/ rJ/ ;Nkca B{z szr eodk j? iK iK iK iK ;ohoe s"o s/ B[e;akB

gj[zukT[Adk j?l iKiKiKiK

xi) gqhfynk ftZu nghno j'D bJh T[whdtko B{z dkyabk ;oNhfce/N Bkb fdZshnK rJhnK

jdkfJsK ftZu'A fe;/ dh T[bzxDk eodk j?l iKiKiKiK

xii) T[es XkoktK ftZu do;kJ/ ;ko/ iKiKiKiK fe;/ fJZe rbs ezw, fit/A th e/; j't/, bJh efw;aB B{z

T[e;kT[Adk j? iKiKiKiK p[ok ezw eoB dh e'f;a;a eodk j?, T[j nkgD/ nkg B{z ca"idkoh w[eZdw/ dk

Gkrh pDkT[Adk j?, T[j fizaw/tko j't/rkL^

(T) efw;aB tZb'A gqhfynk bJh T[; B{z n:'r eoko fdZsk frnk j?, fi; bJh T[j

T[whdtko j?l iKiKiKiK

(n) efw;aB tZb'A eotkJh ikD tkbh e'Jh gqhfynk iKiKiKiK fe;/ f;b?e;aB bJh T[; B{z gZe/ s"o

s/ iKiKiKiK fB;afus ;w/A bJh tofis ehsk frnk j?l

(J) i/eo T[j Gkos ;oeko, oki ;oeko iK iK iK iK gpfbe ;?eNo ndko/ dh B"eoh ftZu j?,

T[; fto[ZX ;pzXs fB:wK sfjs nB[;ak;Bh ekotkJh ehsh ik ;edh j?l

[18]

go ;aos fJj j? fe T[; fto[ZX Xkok (T) iKiKiKiK (n), sfjs fit/A th e/; j't/, e'Jh ;iak BjhA

brkJh ikt/rh f;tkJ/ id sZe L^

i) T[whdtko B{z nkgDh gqsh^p/Bsh fbysh o{g ftZu d/D dk w'ek fdZsk ikt/rk, i/eo T[j fJ;

;pzX ftZu d/Dk ukj[zdk j?l ns/

ii) i/eo T[whdtko tZb'A T[; B{z fdZs/ rJ/ fBoXkos ;w/A ftZu e'Jh gqsh^p/Bsh fdZsh iKdh j? sK

T[; s/ ftuko ehsk ikt/rk .

[19]

gqhfynk e/Adogqhfynk e/Adogqhfynk e/Adogqhfynk e/Ado

nkozGe ns/ w[y w[ekpbk d't/A gqhfynktK gfNnkbk ;afjo ftZu ;fEs e/AdoK s/ eotkJhnK

ikDrhnK . gqhfynk e/Ado dk ;EkB n?vfwN ekov s/ do;kfJnk ikt/rk i' fe T[whdtkoK B{z

gqhfynk ftZu dkyab j'D bJh G/fink ikt/rk . T[whdtko B{z fJZe tko nbkN ehsk nkg;aBb

;pi?eN iKiKiKiK gqhfynk e/Ado fe;/ th jkbs ftZu pdfbnk BjhA ikt/rk .

w[y w[ekpb/ dh gqhfynk w[y w[ekpb/ dh gqhfynk w[y w[ekpb/ dh gqhfynk w[y w[ekpb/ dh gqhfynk

w[y w[ekpb/ dh gqhfynk noiah ckow Bkb d;skt/I j/m fbyh soshp nB[;ko brkJ/ ikD L^

1H iBw fwsh d/ ;p{s ti'A ;oNhfce/N fit/A do;kfJnk frnk j?

2H fvroh ;oNhfce/N

3H w?fNqe iK fJ; d/ pokpo gZXo dh gzikph gk; dk ;p{s

4H ro/i{J/;aB dk vhN/b wkoe; ekov

5H okythA e?N/roh ;pzXh ;oNhfce/N

6H ;kpek c"aih$ ;kpek c"aih dh tz;ars ;zskB (Lineal Descendent of Ex-serviceman

Punjab) ;pzXh ;oNhfce/N

7H p?Ae vokcN

8H fszB gk;g'oN ;kJhi s;dheP[adk c'N'nK i' fe nkozGe gqhfynk Bkb G/ihnK c'N'nK Bkb

fwbdhnK j'D .

[20]

INTRODUCTION

The Joint Public Service Commission, the precursor of the Punjab Public Service Commission, with its writ running from the Khyber Pass to the Jamuna near Delhi, was born at Lahore on May 1, 1937. In the wake of Partition, the Punjab Public Service Commission resurged in February, 1948, at Shimla with its revised jurisdiction extending over the then province of East Punjab. Following the merger of the States of Punjab and Pepsu, it shifted to Patiala. Its area of jurisdiction now covered the domain till then under the Pepsu Public Service Commission. Consequent upon the reorganisation of Punjab in 1966, its bounds were compressed accordingly.

PUNJAB STATE CIVIL SERVICES COMBINED COMPETITIVE EXAMINATION, 2009

A combined competitive examination for recruitment to the Punjab State Civil Services will be held at Patiala in 2009 by the Punjab Public Service Commission.

The Examination will consist of two successive stages:

i) Preliminary Competitive Examination; and

ii) Main Competitive Examination (written and viva voce).

Overview of the Examination:-

(1) Candidates equal to thirteen times of the total vacancies determined by the Government

under sub-rule (1) of Rule 13-A shall qualify for the main competitive examination.

(2) A candidate shall specify in his application the optional subjects which he desires to take

in the preliminary competitive examination.

(3) Unless otherwise directed, a candidate shall answer the paper in English medium or

Punjabi medium.

(4) No candidate shall be eligible to appear in the Main Competitive Examination unless he

obtains 45 per cent marks in aggregate of the two papers with minimum 40 per cent

marks in each subject.

(5) The marks obtained in the preliminary examination by the candidates who are declared

qualified for admission to the main Competitive Examination will not be counted for

determining their final order of merit by the Commission.

(6) The question shall be answered by candidates on an Optical Marks Reader (OMR)

sheet;

(7) Ex-servicemen candidates need to appear in the General Studies paper only, LDESM

category candidates, however, must appear in all the papers, including optional.

VACANCIES

The number of vacancies to be filled on the result of the examination is as follows:

Sr. No. Name of post No. of posts

1. Punjab Civil Service (Executive Branch) 38

2. Deputy Superintendent of Police 18

3. Excise & Taxation Officer 37

4. Tehsildar 06

5. Food Supply and Consumer Affairs Officer 05

6. Block Development & Panchayat Officer 15

7. Assistant Registrar Co-operative Societies 08

8. Labour and Reconciliation Officer 03

9. Employment Generation and Training Officer 13

Total 143

[21]

THE NUMBER OF VACANCIES IS LIABLE TO ALTERATION WITHOUT NOTICE. RESERVATION IN RESPECT OF VACANCIES WILL BE MADE AS MAY BE DETERMINED BY THE GOVERNMENT OF PUNJAB.

Note: Only Resident of Punjab Ex-servicemen/Lineal Descendent of Ex-Servicemen are eligible for reservation under the Ex-servicemen category.

The categorywise detail of posts to be filled on the basis of the result of combined competitive examination, is as follows:-

Sr.

No.

Name of the Post

Gen

ESM/

LDESM

Pb.

SP Pb.

Phy.

Hand.

Pb.

SCOP SC

ESM Pb.

SC SP Pb.

B/M Sikh Pb.

B/M Sikh ESM Pb.

B/M

Sikh SP

Pb.

BC

Pb.

BC ESM Pb.

Total

1

PCS(EB)

17 2 1 1 4 1 1 4 - - 6 1 38

2

DSP

9 1 - - 2 1 - 2 - - 3 - 18

3

ETO

18 3 1 2 4 1 - 4 - - 3 1 37

4

Tehsildar

03 - - 1 - - - - 1 - 1 - 06

5

Food Supply &

Consumer Affairs Officer.

02 - - - 1 1 - - - - 1 - 05

6

BDPO

08 1 - - 1 1 - 1 - 1 2 - 15

7

Assistant Registrar Co-op. Socities

03 1 - - 1 1 - 1 - - 1 - 08

8

Labour & Reconcili-

ation Officer.

01 1 - - 1 - - - - - - - 03

9

Employ-ment

Genera-

tion & Training Officer.

06 1 - - 2 - - 2 - - 2 - 13

Total 67 10 2 4 16 6 1 14 1 1 19 2 143

[22]

ELIGIBILITY CONDITIONS

1. EDUCATIONAL QUALIFICATION

1. The candidate should possess a degree of bachelor in any discipline from a recognised university or institution; Provided that the candidate may be permitted to take preliminary examination while studying for his degree. However, the candidate shall be required to produce proof of passing the degree course for being eligible to take the final examination during that year.

2. No candidate shall be eligible for appearing in the preliminary examination, unless he has passed the Matriculation examination with Punjabi as one of the compulsory or elective subjects or any other equivalent examination in Punjabi language, which may be specified by the Government from time to time.

Explanation:- In this rule, the expression "recognised university" or "institution" shall have the same meaning, as assigned to it in the Punjab Civil Services (General and Common Conditions of Service) Rules, 1994.

IMPORTANT NOTE:- The candidates who have also opted for the Punjab Police Service and who qualify the main competitive examination shall have to qualify the physical test. A candidate is required to fulfil the following physical standards:

Minimum Height Chest Measurement

Men Name of the Post Men Women

Unexpanded Expanded

*Women

DSP 5'.7" 5'.3" 33" 341/2"

-

* Chest measurement is not applicable to women candidates.

2. AGE LIMIT

a) A candidate should have attained the minimum age of twenty one years and should

not have attained the age of thirty five years on the first day of January of the year, in

which the last day falls for submission of application to the Commission;

(i) Provided that in the case of Punjab Police Service, a candidate should have

attained the minimum age of twenty-one years and should not have attained the age of

twenty-eight years on the first day of the year, referred to above.

(ii) Provided that in the case of Deputy Superintendent of Police, candidates belonging

to Scheduled Castes and Backward Classes of Punjab are relaxed in age upto 5 years

as per Punjab Government Instructions.

b) The upper age limit for a Punjab Government employee, including that of a court, who

has not less than four years continuous service under the Government, will be

relaxable up to 45 years.

c) The upper age limit prescribed above will be relaxable up to a maximum of five years

for Schedules Castes and Scheduled Tribes of all States and Backward Classes of

Punjab.

d) The upper age limit for widows, divorcees and certain other categories of women of

Punjab will be relaxable up to 40 years.

[23]

e) Age relaxation in upper age limit, upto 10 years to the disabled persons of Punjab.

f) An ex-serviceman of Punjab domicile shall be allowed to deduct the period of his

service in Armed Forces of the Union from his actual age and if the resultant age does

not exceed the maximum age limit prescribed for direct appointment to such a vacancy

in the Service Rules concerned by more than three years, he shall be deemed to

satisfy the condition regarding age limit.

3. NUMBER OF ATTEMPTS AT THE EXAMINATION

a) Unless covered by any of the exceptions, which may from time to time, be notified by

the Government in this behalf, every candidate appearing for the examination after the

commencement of these rules, shall be permitted to avail four attempts at the

examination.

Explanation:- For the purpose of this rule, an appearance of a candidate in the

Preliminary Examination, shall be deemed to be an attempt at the examination.

b) A Punjab Government servant, including that of court, who is otherwise eligible , and

has not less than four years of continuous service on the last date fixed by the

Commission for submission of applications and who has not availed of three chances

in addition to those which he might have availed of in any other capacity, is eligible to

apply under this category;

c) Ex-servicemen category candidates are permitted only three attempts at the

examination.

4. NATIONALITY

A candidate shall be a:

a) Citizen of India; or

b) Citizen of Nepal; or

c) Subject of Bhutan; or

d) Tibetan refugee who came over to India before the Ist January. 1962, with the intention

of permanently settling in India; or

e) A person of Indian origin who has migrated from Pakistan, Burma, Sri Lanka and East

African countries of Kenya, Uganda and United Republic of Tanzania (formerly

Tanganike and Zanzibar) Zambia, Malawi, Zaire, Ethiopia and Vietnam with the

intention of permanently settling in India;

Provided that a candidate belonging to categories (b), (c), (d) and (e) shall be a person in

whose favour a certificate of eligibility has been issued by the Government of Punjab in the

Department of Home Affairs and Justice.

[24]

PLAN FOR PRELIMINARY COMPETITIVE EXAMINATION

HOW TO APPLY

i) Applications for the Preliminary Competitive Examination are to be made on the

prescribed pre-folded OMR application form. The prescribed Optical Marks Reader (OMR)

application form supplied in the pre-addressed envelope with the Information Brochure is

to be filled by candidates in their own hand. Applications filled in on the format of OMR

form will not be considered. Please read the instructions given on page 76-78 and the

sample on page 199-200 filled in OMR application form before filling the form. The form

will be processed by a computerized system and, therefore, the candidates must take

care that all entries in the form are filled correctly and as described in the instructions.

ii) Candidates are NOT required at this stage to submit along with their application

any certificates in support of their claims regarding age and educational

qualifications, which will be verified only at the time of the Main Competitive

Examination. Therefore, please DO NOT enclose such certificates with your OMR

application form under any circumstances. THESE ARE NOT NEEDED AT THIS STAGE.

iii) The candidates applying for the examination should ensure that they fulfil the

eligibility conditions for admission to the examination. Their admission at all stages

of the examination for which they are admitted by the Commission-Preliminary

Competitive Examination, Main Competitive examination and viva voce test-will be

provisional, subject to their satisfying the prescribed eligibility conditions. If on

verification at any time it is found that they do not fulfil any of the eligibility

conditions, their candidature for the examination will be cancelled. The mere fact

that an ADMIT CARD has been issued to a candidate will not imply that his candidature

has been finally cleared by the Commission or that the entries made by the candidate in

his application have been accepted by the Commission as true and correct. The

Commission will take up the verification of eligibility conditions of a candidate, with

reference to original documents, only after the candidate has qualified for the Main

Competitive Examination. Unless the candidature is formally confirmed by the

Commission, it continues to be provisional. The decision of the Commission as to the

eligibility or otherwise of a candidate for admission to the examination shall be final.

iv) All candidates, whether already in Government Service, or in Government owned

undertakings, or other similar organisations or in private employment, should submit their

application direct to the Commission and inform their employer of their intention to take

the examination. If any candidate forwards his application through his employer and it

reaches the Commission late, the application-even if submitted to the employer before the

closing date-will not be considered.

HOW TO PAY EXAMINATION FEE

The candidates seeking admission to the Preliminary Competitive Examination must pay to

the Commission a fee of Rs.1500/-(Rupees one thousand and five hundred only).

a) The candidates belonging to the Scheduled Castes of all States and Backward Classes

categories of Punjab shall pay an examination fee of only Rs.375/-.

b) Only Ex-servicemen of Punjab are exempted from paying the examination fee.

c) Lineal Descendent of Ex-servicemen (LDESM) category candidates, however, MUST

pay the required examination fee.

[25]

NOTE: The candidates entitled to examination fee concession/exemption MUST submit with

their OMR application form an attested copy of the certificate verifying their claim for

examination fee concession/exemption.

For example, an Ex-servicemen category candidate must submit a certificate stating that

he belongs to the Ex-servicemen category. Specimen copies of such certificates and the

authorities competent to issue such certificates are given in the Brochure. Those candidates

concerned who do not submit such a certificate shall not be entitled to examination fee

concession/exemption under any circumstances.

The Examination fee must be submitted along with the completed application form

through a crossed Bank Demand Draft in original, drawn in favour of the Secretary, Punjab

Public Service Commission, and made payable at Patiala. The applications received without a

valid Bank Demand Draft or with inadequate examination fee shall be summarily rejected. The

examination fee is non-refundable. Candidates must write their Brochure No., name and

address in BLOCK LETTERS on the reverse of the Bank Demand Draft.

SUBMISSION OF APPLICATION FORM

i) Applications on the prescribed OMR form, complete in all respects, must reach the

Secretary, Punjab Public Service Commission, Baradari Gardens, Patiala 147001 before

5.00 PM on or before the last date fixed i.e. 28th December 2009, along with examination

fee. Applications can either be submitted by post or personally at the Reception counter of

the Commission.

ii) The pre-folded OMR application form is supplied in a pre-addressed special envelope and

the candidates MUST dispatch the completed form in the same envelope. The OMR

application form is to be folded in the same manner as it is supplied. No new fold should

be made under any circumstances.

iii) Nothing is to be pinned, stapled, pasted or tagged to the OMR application form. IN CASE

YOU HAVE TO ATTACH/STAPLE AN ACKNOWLEDGEMENT DUE (AD) SLIP TO THE

ENVELOPE, PLEASE DO SO IN THE SPACE PROVIDED ON THE ENVELOPE. THIS

IS IMPORTANT AS THE OMR APPLICATION FORM HAS TO BE PROCESSED BY A

COMPUTER SYSTEM.

The candidates are required to PLACE in the centre-fold of the OMR application form

ONLY the Bank Demand Draft and the proof of claim certificate for examination fee

concession/exemption, where applicable. The bank draft and the proof of claim certificate

are not to be pinned, stapled, pasted or tagged to the OMR application form. No other

certificate, or documents are to be submitted with the OMR application form as such

documents shall be verified only at the time of the Main Competitive Examination.

iv) Due care should be taken by the candidates to fill their application form correctly.

No column should be left blank. Incomplete or wrongly filled application forms shall

be summarily rejected. No representation or correspondence regarding such rejection

shall be entertained under any circumstances.

v) The candidates should note that the Commission will in no case be responsible for non-

receipt of their applications or any delay in receipt on any account whatsoever. No

application received later than the prescribed last date will be entertained under any

circumstances and all the late applications will be summarily rejected. No request for

withdrawal of candidature received from a candidate after he has submitted his

application will be entertained under any circumstances.

[26]

ADMIT CARD

i) The candidates shall be sent an ADMIT CARD by post, which they must bring to the

examination hall, failing which they shall not be allowed to take the examination.

ii) THE CANDIDATES MUST PASTE (NOT PIN OR STAPLE) A LATEST PASSPORT–

SIZE PHOTOGRAPH ATTESTED BY A GAZETTED OFFICER IN THE SPACE

PROVIDED ON THE ADMIT CARD. THE CANDIDATES MUST SIGN ON THE FRONT

SIDE OF THE PHOTOGRAPH.

iii) THE CANDIDATES MAY NOTE THAT THEY SHALL HAVE TO SUBMIT THREE

ATTESTED PHOTOGRAPHS IDENTICAL TO THE ONE PASTED ON THE ADMIT

CARD ALONG WITH THEIR MAIN COMPETITIVE EXAMINATION APPLICATION

FORM. THIS IS TO ENSURE THAT ALL PHOTOGRAPHS SUBMITTED BY THEM AT

VARIOUS STAGES OF THE EXAMINATION ARE IDENTICAL. IF, ON VERIFICATION

AT ANY STAGE, ANY VARIATION IS FOUND IN THE PHOTOGRAPHS SUBMITTED

BY THEM, THEIR CANDIDATURE IS LIABLE TO BE CANCELLED.

The ADMIT CARD, among other things, will contain the roll no., examination centre, subject

option and the timetable of the examination.

INELIGIBLITY CONDITIONS

The following conditions, among others, shall render the candidates ineligible for the

Preliminary Competitive Examination:

a) Insufficient examination fee;

b) Examination fee deposited by means other than a crossed Bank Demand Draft;

c) Late receipt of application form;

d) Wrong/incomplete information given in application form;

e) Candidates debarred by the PPSC/other Commissions;

f) Non-fulfilment of any of the eligibility conditions, including those of age and educational

qualifications.

DISCIPLINARY ACTION

A candidate who is or has been declared by the Commission to be guilty of-

i) Obtaining support for his candidature by-

a) Offering illegal gratification; or

b) applying pressure; or

c) blackmailing, or threatening to blackmail any person connected with the conduct of the

examination; or

ii) impersonating; or

iii) procuring impersonation by any person; or

iv) submitting fabricated or tampered documents; or

v) making statements, which are incorrect or false or suppressing material information; or

[27]

vi) resorting to the following means in connection with his candidature for the examination,

namely:-

a) obtaining copy of question paper through improper means; or

b) finding out the particulars of the persons connected with secret work relating to the

examination; or

c) influencing the examiners; or

vii) using unfair means during the examination; or

viii) Writing obscene matters or drawing obscene sketches in the scripts; or

ix) misbehaving in the examination hall including tearing off the scripts, provoking fellow

examinees to boycott examination, creating a disorderly scene and the like; or

x) harassing or doing bodily harm to the staff employed by the Commission for the conduct

of their examinations; or

xi) violating any of the instructions issued to candidates along with their admission

certificates permitting them to take the examination; or

xii) attempting to commit or, as the case may be abetting the Commission of all or any of the

acts specified in the foregoing clauses, may, in addition to rendering himself liable to

criminal prosecution, be liable-

a) to be disqualified by the Commission from the examination for which he is a

candidate; or

b) to be debarred either permanently or for a specified period by the Commission, from

any examination or selection held by it; and

c) if he is already in service under Government of India, a State Government or a Public

Sector Undertaking, to disciplinary action under the relevant rules;

Provided that no penalty under clause (a) or clause (b) , as the case may be, shall be

imposed, except after-

i) giving the candidate an opportunity of making such representation in writing as he may

wish to make in that behalf; and

ii) taking the representation, if any submitted by the candidate, within the period allowed to

him, into consideration.

EXAMINATION CENTRES

Both the Preliminary and Main Competitive examinations will be held at centres located in

Patiala city. The venue of the examination centre shall be indicated on the Admit Card, which

will be sent to the candidates admitted to the examination. An Examination centre or optional

subject once allotted will not be changed under any circumstances.

[28]

PRELIMINARY PUNJAB STATE CIVIL SERVICE COMBINED COMPETITIVE EXAMINATION

1. The preliminary competitive examination will consist of two papers of objective type (multiple choice questions) and carry a maximum of 450 marks in the subject as under :—

Paper I General Studies 150 Marks Paper II One subject to be selected 300 Marks from the list of optional subjects given below.

Total 450 Marks

List of optional subjects for Preliminary Examination :—

Optional Subjects Code No.

1. Agriculture 01

2. Botany 02

3. Chemistry 03

4. Commerce 04

5. Economics 05

6. Geography 06

7. Geology 07

8. Indian History 08

9. Law 09

10. Mathematics 10

11. Philosophy 11

12. Physics 12

13. Political Science 13

14. Psychology 14

15. Public Administration 15

16. Sociology 16

17. Statistics 17

18. Zoology 18

19. Animal Husbandry and Veterinary Science 19

20. Civil Engineering 20

21. Electrical Engineering 21

22. Mechanical Engineering 22

23. Medical Science 23

Note.— (i) Duration of each paper for Preliminary Examination will be to two hours.

(ii) Both the question papers will be of the objective type (multiple choice questions).

(iii) The question papers will be set both in Punjabi and English.

(iv) The course content of the syllabi or the optional subjects will be of the degree level.

(v) Each paper will be of two hours duration. Blind candidates will, however, be allowed an extra time of twenty minutes at each paper.

(vi) The Syllabus for the optional subjects for the Preliminary Competitive Examination is at page 28 to 70.

(Vii) Number of Questions in Paper-I and Paper-II will be as per UPSC pattern i.e, 150 for General Studies and 120 for Optional Subjects.

[29]

SYLLABUS FOR PRELIMINARY PUNJAB STATE CIVIL SERVICES COMBINED COMPETITIVE EXAMINATION

GENERAL STUDIES

The paper on General Studies will include questions covering the following fields of knowledge.

Punjab’s Economy and People ; its Social, Economic and Cultural Institution ; its Language, its History, its Geography and Current Events.

General Science.

Current Events of national and international importance.

History of India and Indian National Movement.

Indian and World Geography.

Indian Polity and Economy.

General Mental Ability.

Questions on General Science will cover General appreciation and understanding of science

including matters of everyday observation and experience, as may be expected of a well

educated person who has not made a special study of any particular scientific discipline. In

current events, knowledge of significant national and international events will be tested. In

History of India, emphasis will be on broad general understanding of the subject in its social,

economic and political aspects. Questions on the Indian National Movement will relate to the

nature and character of the nineteenth century resurgence, growth of nationalism and

attainment of Independence. In Geography, emphasis will be on Geography of India.

Questions on the Geography of India will relate to physical, social and economic Geography

of the country, including the main features of Indian agricultural and natural resources.

Questions on Indian Polity and Economy will test knowledge of the country’s political system

and Constitution of India. Panchayati Raj, Social System and economic developments in

India. On general mental ability, the candidates will be tested on reasoning and analytical

abilities.

[30]

OPTIONAL SUBJECTS FOR PRELIMINARY EXAMINATION

AGRICULTURE CODE NO. (01)

Agriculture, its importance in national economy. Factors determining agro-ecological zones

and geographical distribution of crop plants.

Importance of crop plants, cultural practices for cereal, pulses, oilseed, fibre, sugar, tuber and

fodder crops and scientific basis for these crop rotations, multiple and relay cropping,

intercropping and mixed cropping.

Soil as medium of plant growth and its composition, mineral and organic constituents of the

soil and their role in crop production; chemical, physical and microbiological properties of

soils. Essential plant nutrients (macro and micro)—their functions, occurrence, cycling in soils.

Principles of soil fertility and its evaluation for judicious fertilizer use. Organic manures and

bio-fertilizers, inorganic fertilizers, integrated nutrient management.

Principles of plant physiology with reference to plant nutrition, absorption, translocation and

metabolism of nutrients.

Diagnosis of nutrient deficiencies and their amelioration, photosynthesis and respiration,

growth and development, auxins and hormones in plant growth.

Cell and cell organelles. Cell division. Reproductive cycle. Principles of genetics, gene-

interaction, sex determination, linkage and recombination, mutation, extra-chromosomal

inheritance, polyploidy. Origin and domestication of crop plants. Genetic resources—

conservation and utilization. Floral biology in relation to selfing and crossing.

Genetic basis of plant breeding, pureline selection, mass selection, male sterility and

incompatibility and their use in plant breeding. Pedigree selection, back-cross method of

selection. Heterosis and its exploitation. Development of hybrids, composites and synthetics,

Important varieties, hybrids, composites and synthetics of major crops. Seeds and seed-

production techniques.

Important fruit and vegetable crops of India, method of propagation—sexual and asexual.

Package and practices and their scientific basis. Croporotation, intercropping, companion

crops, role of fruits and vegetables in human nutrition, post-harvest handling and processing

of fruits and vegetables. Landscaping and ornamental horticulture, commercial floriculture.

Medicinal and aromatic plants.

Serious pests and diseases affecting major crops. Principles of control of crop pests and

diseases, integrated management. Proper use and maintenance of plant protection

equipment.

Principles of economics as applied to agriculture. Farm planning and optimum resource—use

efficiency and maximising income and employment. Farm systems and their spatial

distribution, their significant roles in regional economic development.

[31]

BOTANY—CODE NO. (02)

1. Cell Biology.—Structure and function of cell wall (extra cellular matrix or ECM), cell

membrane and cell organelles. Nucleus, nucleolus, nuclear pore complex (NPC),

chromosome and nucleosome. Mitosis, meiosis, molecular control involving checkpoints

in cell division cycle. Differentiation, cellular senescence.

2. Genetics, Molecular Biology and Biotechnology.—Laws of inheritance. Concept of

gene and allelomorph. Linkage, crossing over and gene mapping. Structural and

numerical changes in chromosomes and gene mutations. Sex determination and

differentiation. Structure and synthesis of nucleic acids and proteins. Genetic code.

Regulation of gene expression. Genetic engineering and crop improvement. Protoplast,

cell, tissue and organ cultures. Somatic hybridization. Biofertilizers and biopesticides.

Biotechnology in agri-horticulture, medicine and industry.

3. Tissue Systems.—Origin, development, structure and function of primary and secondary

tissues.

4. Plant Diversity and Systematics.—Structure and function of plant forms from

evolutionary aspect (viruses to Angiosperms including fossils). Principles of

nomenclature, classification and identification of plants. Modern approaches in plant

taxonomy. Recent classification of living organisms into three groups (bacteria, archaea

and eukarya).

5. Plant Physiology.—Water relations. Mineral nutrition. Photosynthesis. Respiration. Nitrogen metabolism. Enzymes and coenzymes. Dynamics of growth, growth movements, growth substances, photomorphogenesis. Secondary metabolites. Isotopes in biological studies. Physiology of flowering.

6. Methods of Reproduction and Seed Biology.—Vegetative, asexual and sexual methods of reproduction. Pollination and fertilization. Sexual incompatibility. Development, structure, dormancy and germination of seed.

7. Plant Pathology.—Diseases of rice, wheat, sugarcane, potato, mustard, groundnut and cotton crops. Factors affecting infection (host factors, pathogen factors, biotic factors like rhizosphere and phyllosphere organisms). Chemical, biological and genetic methods of disease control (including transgenic plants).

8. Plant and Environment.—Biotic and abiotic components. Ecological adaptation. Types of vegetational zones and forests of India. Deforestation, afforestation, social forestry and plant introduction. Soil erosion, wasteland, reclamation. Environmental pollution and its control (including phytoremediation), Bioindicators, Global warming.

9. Biodiversity, Plant Genetic Resources.—Methods of conservation of plant genetic resources and its importance. Convention of Biological Diversity (CBD). Endangered, threatened and endemic taxa. Role of cell/tissue culture in propagation and enrichment of genetic diversity. Plants as sources of food, fodder, forage, fibres, oils, drugs, wood and timber, paper, rubber, beverages, spices, essential oils and resins, gums, dyes, insecticides, pesticides and ornamentation. Biomass as a source of energy.

10. Origin of Life and Evolution.—Basic concepts of origin of earth and origin of life. Theories of organic evolution, molecular basis of evolution.

[32]

CHEMISTRY—CODE NO. (03)

SECTION—A (Inorganic Chemistry)

1.1 Atomic structure.—Schrodinger wave equation, significance of Ψ1 and Ψ2, quantum numbers and their significance, radial and angular probability, shapes of orbitals, relative energies of atomic orbitals as a function of atomic number. Electronic configurations of elements; Aufbau principle, Hund’s multiplicity rule, Pauli exclusion principle.

1.2 Chemical periodicity.—Periodic classification of elements, salient characteristics of s, p, d and f block elements. Periodic trends of atomic radii, ionic radii, ionisation potential, electron affinity and electronegativity in the periodic table.

1.3 Chemical bonding.—Types of bonding, overlap of atomic orbitals, sigma and pi bonds,

hydrogen and metallic bonds. Shapes of molecules, bond order, bond length,

V.S.E.P.R. theory and bond angles. The concept of hybridization and shapes of

molecules and ions.

1.4 Oxidation states and oxidation number.—Oxidation and reduction, oxidation

numbers, common redox reactions, ionic equations. Balancing of equations for oxidation

and reduction reactions.

1.5 Acids and bases.—Bronsted and Lewis theories of acids and bases. Hard and soft

acids and bases. HSAB principle, relative strengths of acids and bases and the effect of

substituents and solvents on their strength.

1.6 Chemistry of elements :

(i) Hydrogen.—Its unique position in the periodic table, isotopes, ortho and para

hydrogen, industrial production, heavy water.

(ii) Chemistry of s and p block elements.—Electronic configuration, general

characteristics properties, inert pair effect, allotropy and catenation. Special

emphasis on solutions of alkali and alkaline earth metals in liquid ammonia.

Preparation, properties and structures of boric acid, borates, boron nitrides,

borohydride (diborane), carboranes, oxides and oxyacids of nitrogen, phosphorous,

sulphur and chlorine; interhalogen compounds, polyhalide ions, pseudohalogens,

fluorocarbons and basic properties of halogens. Chemical reactivity of noble gases,

preparation, structure and bonding of noble gas compounds.

(iii) Chemistry of d block elements.—Transition metals including lanthanides, general

characteristic properties, oxidation states, magnetic behaviour, colour. First row

transition metals and general properties of their compounds (oxides, halides and

sulphides); lanthanide contraction.

1.7 Extraction of metals.—Principles of extraction of metals as illustrated by sodium,

magnesium, aluminium, iron, nickel, copper, silver and gold.

1.8 Nuclear Chemistry.—Nuclear reactions; mass defect and binding energy, nuclear

fission and fusion. Nuclear reactors; radioisotopes and their applications.

1.9 Coordination compounds.—Nomenclature, isomerism and theories of coordination

compounds and their role in nature and medicine.

1.10 Pollution and its control.—Air pollution, types of air pollutants; control of air and water

pollution; radioactive pollution.

[33]

SECTION—B (Organic Chemistry)

2.1 Bonding and shapes of organic molecules.—Electronegativity, electron

displacements—inductive, mesomeric and hyperconjugative effects; bond polarity and

bond polarizability, dipole moments of organic molecules; hydrogen bond; effects of

solvent and structure on dissociation constants of acids and bases; bond formation,

fission of covalent bonds ; homolysis and heterolysis; reaction intermediates—

carbonations, carbanions, free radicals and carbenes; generation, geometry and

stability; nucleophiles and electrophiles.

2.2 Chemistry of aliphatic compounds.—Nomenclature; alkenes—synthesis, reactions

(free radical halogenation) — reactivity and selectivity, sulphonation—detergents;

cycloalkanes-Baeyer’s strain theory; alkenes and alkynes—synthesis, electrohilic

addition reactions, Markownikov’s rule, peroxide affects, 1, 3—dipolar addition;

nucleophilic addition to electron-deficient alkenes; polymerisation; relative acidity;

synthesis and reactions of alkyl halides, alkanols, alkanals, alkanones, alkanoic acids,

esters, amides, nitriles, amines, acid anhydrides, £, ß– unsaturated ketones, ethers and

nitro compounds.

2.3 Stereochemistry of carbon compounds.—Elements of symmetry, chiral and achiral

compounds. Fischer projection formulae; optical isomerism of lactic and tartaric acids,

enantiomerism and diastereoisomerism; configuration (relative and absolute);

conformations of alkanes upto four carbons, cyclohexane and dimethylcyclo hexanes—

their potential energy. D, L- and R, S-notations of compounds containing chiral centres;

projection formulae—Fischer, Newman and Sawhorse—of compounds containing two

adjacent chiral centres; meso and dl-isomers, erythro and threoisomers; racemization

and resolution; examples of homotopic, enantiotopic and diasteretopic atoms and groups

in organic compounds, geometrical isomers; E and Z notations. Stereochemistry of SN1,

SN2, E1 and E2 reactions.

2.4 Organometallic compounds.—Preparation and synthetic uses of Grignard reagents,

alkyl lithium compounds.

2.5 Active methylene compounds.—Diethyl malonate, ethyl acetoacetate, ethyl

cyanoacetate—applications in organic synthesis; tautomerism (ketoenol).

2.6 Chemistry of aromatic compounds.—Aromaticity; Huckel’s rule; electrophilic aromatic

substitution—nitration, sulphonation, halogenation (nuclear and side chain), Friedel-

Crafts alkylation and acylation, substituents effect; chemistry and reactivity of aromatic

halides, phenols, nitro-, diazo, diazonium and sulphonic acid derivatives, benzyne

reactions.

2.7 Chemistry of biomolecules.—(i) Carbohydrates Classification, reactions, structure of

glucose, D, L-configuration, osazone formation; fructose and sucrose; step-up and step-

down of aldoses and ketoses, and their interconversions,

(ii) Amino Acids : Essential amino acids; zwitterions, isoelectric point, polypeptides;

proteins; methods of synthesis of £ amino acids.

(iii) Elementary idea of oils, fats, soaps and detergents.

2.8 Basic principles and applications.—Of UV, visible, IR and NMR spectroscopy of

simple organic molecules.

[34]

SECTION—C (Physical Chemistry)

3.1 Gaseous state.—Deviation of real gases from the equation of state for an ideal gas,

Van der Waals and Virial equation of state, critical phenomena, principle of

corresponding states, equation for reduced state. Liquification of gases, distribution of

molecular speed, collisions between molecules in a gas; mean free path, specific heat

of gases

3.2 Thermodynamics.—(i) First law and its applications: Thermodynamic systems,

states and processes, work, heat and internal energy, zeroth law of thermodynamics,

various types of work done on a system in reversible and irreversible processes.

Calorimetry and thermochemistry, enthalpy and enthalpy changes in various physical

and chemical processes, Joule-Thomson effect, inversion temperature. Heat capacities

and temperature dependence of enthalpy and energy changes.

(ii) Second law and its applications.—Spontaneity of a process, entropy and entropy

changes in various processes, free energy functions, criteria for equilibrium, relation

between equilibrium constant and thermodynamic quantities.

3.3 Phase rule and its applications.—Equilibrium bewteen liquid, solid and vapours of a

pure substance, Clausius-Clapeyron equation and its applications. Number of

components, phases and degrees of freedom; phase rule and its applications; simple

systems with one (water and sulphur) and two components (lead-silver, salt hydrates).

Distribution law, its modifications, limitations and applications.

3.4 Solutions.—Solubility and its temperature dependence, partially miscible liquids, upper

and lower critical solution temperatures, vapour pressures of liquids over their mixtures,

Raoult’s and Henry’s laws, fractional and steam distillations.

3.5 Colligative Properties.—Dilute solutions and colligative properties, determination of

molecular weights using colligative properties.

3.6 Electrochemistry.—Ions in solutions, ionic equilibria, dissociation constants of acids

and bases, hydrolysis, pH and buffers, theory of indicators and acid-base titrations.

Conductivity of ionic solutions, its variation with concentration, Ostwald’s dilution law,

Kohlrausch law and its application. Transport number and its determination. Faraday’s

laws of electrolysis, galvanic cells and measurements of their e.m.f., cell reactions,

standard cell, standard reduction potential, Nernst equation, relation between

thermodynamic quantities and cell e.m.f., fuel cells, potentiometric titrations.

3.7 Chemical kinetics.—Rate of chemical reaction and its dependence on concentrations

of the reactants, rate constant and order of reaction and their experimental

determination; differential and integral rate equations for first and second order reaction,

half-life periods; temperature dependence of rate constant and Arrhenius parameters;

elementary ideas regarding collision and transition state theory.

3.8 Photochemistry.—Absorption of light, laws of photochemistry, quantum yield, the

excited state and its decay by radiative, non radiative and chemical pathways; simple

photochemical reactions.

3.9 Catalysis.—Homogeneous and heterogeneous catalysis and their characteristics,

mechanism of heterogeneous catalysis; enzyme catalysed reactions (Michaelis-Menten

mechanism).

3.10 Colloids.—The colloidal state, preparation and purification of colloids and their

characteristics properties; lyophilic and lyophobic colloids and coagulation; protection of

colloids; gels, emulsions, surfactants and micelles.

[35]

COMMERCE—CODE NO. (4)

Part-I Accounting and Auditing

Nature, Scope and Objectives of Accounting—Accounting as an Information System—Users

of Accounting Information.

Generally Accepted Principles of Accounting—The Accounting Equation—Accrual Concept—

Other concepts and Conventions Distinction between capital and revenue expenditure.

Accounting Standards and their application—Accounting standards relating to fixed assets,

depreciation, inventory, recognition of revenue.

Final Accounts of Sole Proprietors, Partnership Firms and Limited Companies—Statutory

Provisions —Reserves, Provisions and Funds.

Final Accounts of non-profit organisation.

Accounting problems related to admission and retirement of a partner and dissolution of a

firm.

Accounting for Shares and Debentures—Accounting Treatment of convertible debentures.

Analysis and Interpretation of Financial Statements Ratio analysis and interpretation. Ratios

relating to short term liquidity, long term solvency and profitability—Importance of the rate of

return on investment (ROI) in evaluating the overall performance of a business entity—Cash-

flow statement and statement of source and Application of Funds—Societal obligations of

Accounting.

AUDITING

—Nature, objectives and basic principles of auditing.

—Techniques of Auditing—physical verification, examination of documents and vouching

direct confirmation, analytical review.

—Planning an audit, audit programmes, working paper, audit process.

—Evaluation of internal controls.

—Test checking and sampling.

—Broad outlines of company audit.

—Audit of non-corporate enterprises.

—Internal and management audit.

Part—II Business Organisation

Distinctive features of different forms of business organisation

Sole Proprietor :

Partnership-characteristics, Registration, partnership deed, rights and duties, retirement,

dissolution.

[36]

Joint Stock Company—Concept, characteristics, types.

Cooperative and State ownership forms of organisations.

Types of securities and methods of their issue.

Economic functions of the capital market, stock exchanges.

Mutual Funds, Controls and regulations of capital market.

Business Combination: Control of Monopolies. Problems of modernisation—industrial

enterprises. Social Responsibility of business.

Foreign trade—Procedure and financing of import and export trade. Incentives for export

promotion. Financing of foreign trade.

Insurance—Principles and practice of Life, Fire, Marine and General Insurance.

MANAGEMENT

Management functions—Planning—strategies, Organising-levels of authority, Staffing, Line

function and staff function, Leadership, Communication, Motivation.

Directing—Principles, Strategies.

Coordination—Concept, types, methods.

Control—principles, performance standards, corrective action.

Salary and wage administration—Job evaluation.

Organisation Structure—Centralisation and decentralisation—Delegation of authority—Span

of control—Management by Objectives and Management by Exception.

Management of change: Crisis Management.

Office Management—Scope and principles: systems and routines: handling of records—

modern aids to Office management: office equipment and machines: Automation and

Personal computers.

Impact of Organisation and Methods (O & M)

Company Law :

Joint stock companies—incorporation, documents and formalities—Doctrine of indoor

management and constructive notice.

Duties and powers of the board of directors of a company.

Accounts and audit of companies.

Company Secretary—role and functions—qualifications for appointment.

[37]

ECONOMICS—CODE NO. (05)

Part-I—General Economics

1. Micro-Economics.—(a) Production : Agents of Production; Costs and Supply;

Isoquants; (b) Consumption and Demand: Elasticity concept; (c) Market Structures and

concepts of equilibrium; (d) Determination of prices; (e) Components and Theories of

Distribution; (f) Elementary concepts of Welfare economics : Pareto-optimality—Private

and social products—consumers surplus.

2. Macro-Economics.—(a) National Income concepts; (b) Determinants of National

Income Employment; (c) Determinants of consumption, savings and Investment; (d)

Rate of Interest and its determination; (e) Interest and profit.

3. Money, Banking and Public Finance.—(a) Concepts of Money and measures of

money supply; velocity of money; (b) Banks and credit creation: Banks and portfolio

management; (c) Central Bank and control over money supply; (d) Determination of the

price level; (e) Inflation, its causes and remedies; (f) Public Finance—Budget—Taxes

and non-tax revenues—Types of Budget deficits.

4. International Economics.—

(1) Theories of International Trade—comparative costs—Heckscher—Ohlin—Gains from

(2) Free Trade and Protection.

(3) Balance of Payments Accounts and Adjustment.

(4) Exchange rate under free exchange markets.

(5) Evolution of the International Monetary Systems and World Trading order—Gold

Standard—the Bretton woods system—

IMF and the World Bank and their associates—

Floating rates—GATT and WTO

5. Growth and Development.—(1) Meaning and measurement of growth; Growth,

distribution and Welfare ; (2) Characteristics of underdevelopment; (3) Stages of

Development; (4) Sources of growth—capital, Human capital, population, productivity,

Trade and aid, non-economic factors; growth Strategies, (5) Planning in a mixed

economy—Indicative planning—Planning and growth.

6. Economic Statistics.—Types of averages—measures of dispersion—correlation—

Index numbers; types, uses and limitations.

Part-II—Indian Economics

1. Main features; Geographic size—Endowment of natural resources, Population; size,

composition quality and growth trend—Occupational distribution—Effects of British Rule

with reference to Drain theory and Laissez Faire policy.

2. Major problems, their dimensions, nature and broad causes; Mass poverty—

Unemployment and its types—Economic effects of population pressure—Inequality and

types thereof—Low productivity and low per capita income, Rural—urban

[38]

disparities—Foreign Trade and payments imbalances. Balance of Payments and

External

Debt—Inflation, and parallel economy and its effects—Fiscal deficits.

3. Growth in income and employment since Independence—Rate, Pattern, Sectoral

trends—Distributional Changes—Regional disparities.

4. Economic Planning in India : Major controversies on planning in India—Alternative

strategies—goals and achievements, shortfalls of different plans—planning and the

Market.

5. Broad Fiscal, monetary, industrial trade and agricultural policies—objectives, rationale,

constraints and effects.

[39]

GEOGRAPHY - CODE NO. (06)

Section - A - Physical Geography

(i) Geomorphology : Origin of the earth; Geological Time Scale; Interior of the earth;

Types and characteristics of rocks; Folding and Faulting; Volcanoes; Earthquakes;

Weathering; Landforms caused by fluvial, aeolian and glacial actions.

(ii) Climatology : Structure and composition of atmosphere; Temperature; Pressure belts

and Wind systems; Clouds and rainfall types; Cyclones and anti-cyclones; Major

climatic types.

(iii) Oceanography : Ocean relief; Temperature; Salinity; Ocean deposits; Ocean currents,

El Nino and La Nino; Waves and tides.

(iv) Biogeography : Origin and types of soils; Major biomes of the world; Ecosystem and

food chain; Environmental degradation and conservation.

Section - B - Human Geography

(i) Man and Environment Relationship : Growth and development of Human Geography;

Concepts of Determinism and Possibilism.

(ii) Population.—Races of mankind and tribes; growth and distribution of world population;

migration; population problems of developed and developing countries.

(iii) Economic Activities.—Food gathering and hunting; pastoral herding; fishing and

forestry; Types of agriculture-shifting, subsistence, commercial and plantation; Mining,

Power; Manufacturing—locational factors of textile, iron and steel, sugar and fertilizer

industries; Tertiary activities—trade, transport, communication and services.

(iv) Settlements.—Origin, types and patterns of rural settlements; Processes of

urbanization; morphology and functional classification of towns; million-cities and mega-

cities.

Section - C - Geography of the World

(i) Major Natural Regions ; Characteristics, economic base and human adaptation.

(ii) Regional Geography of Developed Countries : Canada, U.S.A., Western Europe,

Russia, Japan, Australia and New Zealand.

(iii) Regional Geography of Developing Countries : S.E. Asia, S.W. Asia, China, Southern

Africa and Brazil.

(iv) Regional Geography of South Asia.

Section - D - Geography of India

(i) Physical Setting.—Landforms, drainage, climate, soils and natural vegetation.

(ii) Economic Base.—Minerals & energy resources, aquatic resources, forest resources;

irrigation, agriculture and industries; trade and commerce.

(iii) Population.—Growth, distribution and density; demographic characteristics.

[40]

(iv) Environmental problems, developmental issues and regional planning.

Section - E - Geographical Thought

(i) Ancient Period.—Contributions of Indians, Greeks, Romans and Arabs.

(ii) Pre-Modern Period.—Contributions of Verenius, Kant, Humboldt and Ritter.

(iii) Modern Period.—Dichotomy of determinism and possibilism; contributions of Ratzel,

Semple, Huntington and La Blache.

(iv) Recent Period.—Quantitive Revolution; Radicalism, Behaviouralism and Humanism.

Section-F—Techniques of Geographical Analysis

(i) Maps : Scale types and uses.

(ii) Diagrams : Types and uses

(iii) Projections : Types, characteristics and uses.

(iv) Remote sensing and geographical information system (GIS) : Aerial photographs

and imagery, GIS.

[41]

GEOLOGY : CODE NO. (07)

PART-I

(a) General Geology : Solar System. The Earth : its origin, age and internal constitution.

Volcanoes—types, distribution, geological effects and products. Earthquakes—intensity,

magnitude, distribution, causes and effects. Elementary ideas about isostasy,

geosynclines, mountain building, continental drift, sea floor spreading and plate

tectonics.

(b) Geomorphology : Basic concepts. External and internal processes. Rock weathering.

Cycle of erosion. Fluvial landforms and drainage patterns. Landforms of aeolian,

marine, glacial and ‘Karst’ landscapes. Elements of Remote Sensing.

(c) Structural and field Geology : Primary and secondary structures. Dip and strike of

beds. Unconformities. Study of folds, joints, faults, foliation and lineations. Overthrusts

and nappe structures. Stages of rock deformation. Construction of block diagrams.

Stereographic and equal-area nets. Solution of simple problems by stereographic net.

Topographic maps and their interpretation. Use of clinometer compass in the field.

Measurements of bed, foliation, folds, joints, faults and lineations in the field. Principles

of geological mapping. Effects of topography on outcrops. Drawing of sections.

PART-II

(a) Crystallography : Elements of crystal structure. Laws of crystallography, Symmetry

elements of normal classes of seven crystal systems.

Properties and interaction of light and crystalline matter. Petrological microscope and

accessories. Construction and use of Nicole prism. Pleochroism, double refraction,

extinction angle, birefringence and twinning in crystals, Isotropic, uniaxial and biaxial

minerals.

(b) Mineralogy : Physical, chemical and optical properties of the following common rock

forming minerals: quartz, feldspar, mica, pyroxene, amphibole, olivine, garnet, chlorite,

carbonates, aluminosilicates. Structure of silicates and crystal chemistry of minerals.

Gemstones.

(c) Economic Geology : Ore, ore mineral and gangue. Classification of ore deposits. Important processes of their formation. Occurrence, origin and distribution in India of the ores of aluminium, chromium, copper, gold, lead, zinc, iron, manganese and radioactive elements. Deposits of minerals use as abrasives, refractories and in ceramics, deposits of coal and petroleum. Elements of prospecting for mineral deposits.

PART -III

(a) Igneous Petrology : Origin of magma and formation of igneous rocks. Bowen’s reaction principle. Crystallisation of binary systems. Classification of igneous rocks. Textures and structures of igneous rocks. Composition, origin and mode of occurrence of granite, syenite, diorite, mafic and ultramafic groups, anorthosites and alkaline rocks.

(b) Sedimentary Petrology : Sedimentary process and products. Classification of sedimentary rocks. Sedimentary structures. Residual deposits—their mode of formation, characteristics and types, Clastic deposits—their classification, mineral composition and texture. Elementary ideas about the origin and characteristics of quartz arenites,

[42]

arkoses and graywackes. Siliceous and calcareous deposits of chemical and organic origin.

(c) Metamorphic Petrology : Types and factors of metamorphism. Zones, grades and facies of metamorphism. Regional and contact metamorphism. Textures and structures of metamorphic rocks. Metamorphism of argillaceous, arenaceous, calcareous and basic rocks. Metasomatism.

PART-IV

(a) Palaeontology : Habits and habitats of animals. Fossils and fossilization. Modes of preservation. Application of fossils, Study of morphology and geological history of Foraminiferida, Brachiopoda, Bivalvia, Gastropoda, Cephalopoda, Trilobita, Echinoidea and Anthozoa.

Mammals of Siwalik Group. A brief study of Gondwana flora.

(b) Stratigraphy and Geology of India : Fundamental laws of stratigraphy. Stratigraphic classification lithostratigraphic, biostratigraphic and chronostratigraphic. Geological time scale.

Physiographic divisions and outline of stratigraphy of India. Brief study of Dharwar,

Vindhyan and Gondwana Supergroups and Siwalik Group with reference to their major

subdivisions, lithology, fossils, areal distribution and economic importance.

[43]

INDIAN HISTORY : CODE NO. (08)

Section-A

1. Prehistoric cultures in India

2. Indus Civilization. Origins. The Mature Phase; extent, society, economy and culture.

Contacts with other cultures.Problems of decline.

3. Geographical distribution and characteristics of pastoral and farming communities

outside the Indus region, from the neolithic to early iron phases.

4. Vedic society. The Vedic texts; change from Rigvedic to later Vedic phases. Religion ;

Upanishadic thought. Political and social organisation; evolution of monarchy and varna

system.

5. State formation and urbanization, from the mahajanapadas to the Nandas. Jainism and

Buddhism. Factors for the spread of Buddhism.

6. The Mauryan Empire. Chandragupta; Megasthenes. Asoka and his inscriptions; his

dhamma, administration, culture and art. The Arthasastra.

7. Post-Mauryan India, BC 200- AD 300. Society: Evolution of jatis. The Satavahanas and

state formation in Peninsula. Sangam texts and society. Indo-Greeks, Sakas,

Parthians, Kushanas; Kanishka. Contacts with the outside world. Religion : Saivism,

Bhagavatism, Hinayana and Mahayana Buddhism; Jainism; Culture and art.

8. The Guptas and their successors (to c. 750 AD). Changes in political organisation of

empire. Economy and society. Literature and science. Arts.

Section-B

9. Early Medieval India. Major dynasties; the Chola Empire. Agrarian and political

structures. The Rajaputras. Extent of social mobility. Position of women. The Arabs in

Sind and the Ghaznavides.

10. Cultural trends, 750-1200, Religious conditions : importance of temples and monastic

institutions; Sankaracharya; Islam; Sufism. Literature and Science. Alberuni’s “India”.

Art and architecture.

11-12. Thirteenth and fourteenth Centuries: Ghorian invasions causes and consequences.

Delhi Sultante under the “Slave” Rulers. Alauddin Khalji : Conquests; administrative,

agrarian and economic measures. Muhammad Tughlug’s innovations. Firuz Tughluq

and the decline of the Delhi Sultante. Growth of commerce and urbanization. Mystic

movements in Hinduism and Islam. Literature. Architecture, Technological changes.

13. The fifteenth and early 16th Century : major Provincial dynasties; Vijaya-nagara

Empire. The Lodis, First phase of the Mughal Empire: Babur, Humayun. The Sur

empire and administration. The Portuguese.

Monotheistic movements: Kabir, Guru Nanak and Sikkhism; Bhakti. Growth of regional

literatures. Art and Culture.

14-15. The Mughal Empire , 1556-1707. Akbar: conquests, administrative measures, jagir and

mansab system ; policy of sulh-i-kul. Jahangir, Shahjahan and Aurangzeb :

expansion in the Deccan; religious policies, Shivaji.

Culture: Persian and regional literatures, religious thought: Abul Fazl; Maharashtra

dharma. Painting. Architecture.

[44]

Economy: conditions of peasants and artisans, growth in trade; commerce with Europe.

Social stratification and status of women.

16. Decline of Mughal Empire, 1707-61. Causes behind decline. Maratha power under the

Peshwas. Regional states. The Afghans. Major elements of composite culture. Sawai

Jai Singh, astronomer. Rise of Urdu language.

Section-C

17. British expansion : The Carnatic Wars, Conquest of Bengal. Mysore and its resistance

to British expansion: The three Anglo-Maratha Wars. Early structure of British Raj:

Regulating and Pitt’s India Acts.

18. Economic Impact of the British Raj : Drain of Wealth (Tribute); land revenue

settlements (zamindari, ryotwari, mahalwari); Deindustrialisation; Railways and

commercialisation of agriculture; Growth of landless labour.

19. Cultural Encounter and Social Changes : Introduction of western education and modern

ideas. Indian Renaissance, social and religious reforms movements; growth of Indian

middle class; The press and its impact: rise of modern literature in Indian languages.

Social reforms measures before 1857.

20. Resistance to British rule : Early uprisings; The 1857 Revolt—causes, nature, course

and consequences.

21. Indian Freedom struggle—the first phase: Growth of national consciousness; Formation

of Associations; Establishment of the Indian National Congress and its Moderate

phase;—Economic Nationalism; Swadeshi Movement; The growth of “Extremism” and

the 1907 split in Congress; The Act of 1909—the policy of Divide and Rule; Congress-

League Pact of 1916.

22. Gandhi and his thought; Gandhian techniques of mass mobilisation—Khilafat and Non

Cooperation Movement, Civil Disobedience and Quit India Movement; Other strands in

the National Movement—Revolutionaries, the Left, Subhas Chandra Bose and the

Indian National Army.

23. Separatist Trends in Indian nationalist politics-—the Muslim League and the Hindu

Mahasabha; The post -1945 developments; Partition and Independence.

24. Indian independence to 1964. A parliamentary, secular, democratic republic (the 1950

Constitution). Jawaharlal Nehru’s vision of a developed, socialist society, Planning and

state-controlled industrialization. Agrarian reforms. Foreign policy of Non-alignment and

Chinese aggression.

[45]

LAW CODE NO. (09)

I. Jurisprudence :

1. Nature and concept of law.

2. Schools of Jurisprudence : Analytical, Historical, Philosophical, Sociological and

Natural.

3. Administration of Justice : Theories of punishment.

4. Sources of Law : Customs, Precedent and Legislation.

5. A few basic Legal concepts:

(i) Rights and Duties.

(ii) Legal Personality.

(iii) Ownership and Possession.

II. Constitutional Law of India

1. Salient features of the Indian Constitution.

2. Preamble.

3. Fundamental Rights, Directive Principles and Fundamental Duties.

4. Constitutional position and powers of President and Governors.

5. Supreme Court and High Courts: Jurisdiction, powers, appointment and transfer of

Judges.

6. Union Public Service Commission and State Public Service Commissions: Powers

and functions.

7. Distribution of Legislative and Administrative Powers between the Union and the

States ;

8. Emergency Provisions ;

9. Amendment of the Constitution.

III. International Law :

1. Nature and definition of International Law ;

2. Sources: Treaty, Custom, General Principles of Law recognized by civilized nations,

and subsidiary means of determination of law ;

3. State Recognition and State Succession ;

4. The United Nations, its objectives, purpose and Principal Organs; Constitution, role

and jurisdiction of International Court of Justice ;

5. Protection of Human Rights :

(i) Provisions in the UN Charter ;

(ii) Universal Declaration of Human Rights, 1948 ;

(iii) International Covenant of Civil and Political Rights, 1966 ;

(iv) International Covenant on Economic, Social and Cultural Rights, 1966.

[46]

IV. Torts :

1. Nature and definition of Tort ;

2. Liability based on fault and strict liability ;

3. Vicarious Liability including State Liability ;

4. Joint Tort-feasors ;

5. Negligence ;

6. Defamation ;

7. Conspiracy ;

8. Nuisance ;

9. False imprisonment ;

10. Malicious Prosecution.

V. Criminal Law :

1. General Principles of criminal liability: Mens rea and actus reus ;

2. Preparation and criminal attempts ;

3. General exceptions ;

4. Joint and constructive liability ;

5. Abetment ;

6. Criminal Conspiracy ;

7. Sedition ;

8. Murder and culpable homicide ;

9. Theft: extortion, robbery and dacoity ;

10. Misappropriation and Criminal breach of trust.

VI. Law of Contract :

1. Definition of contract ;

2. Basic elements of contract: Offer, acceptance, consideration, contractual capacity ;

3. Factors vitiating consent ;

4. Void, Voidable, illegal and unenforceable agreements ;

5. Wagering agreements ;

6. Contingent contracts ;

7. Performance of contracts ;

8. Dissolution of contractual obligations: frustration of contracts ;

9. Quasi-contracts ;

10. Remedies for breach of contract.

[47]

MATHEMATICS—CODE NO. (10)

1. Algebra.—Elements of Set Theory; Algebra of Real and Complex numbers including

Demovire’s Theorem; Polynomials and Polynomial Equations, Relation between Co-

efficients and Roots, Symmetric functions of roots;

Elements of Group Theory; Sub-groups, Cyclic groups, Permutation groups and their

elementary properties.

Rings, Integral Domains and Fields and their elementary properties.

2. Vector Spaces and Matrices : Vector Space, Linear Dependence and Independence,

Sub-spaces, Basis and Dimensions, Finite Dimensional Vector Spaces. Linear

Transformation of a Finite Dimensional Vector Space, Matrix Representation. Singular

and Non-singular Transformations. Rank and Nullity.

Matrices.—Addition, Multiplication, Determinants of a Matrix, Properties of Determinants

of order ‘n’ Inverse of a Matrix, Cramer’s rule.

3. Geometry and Vectors.—Analytic Geometry of straight lines and conics in Cartesian and

Polar coordinates; Three Dimensional geometry for planes, straight lines, sphere, cone

and cylinder. Addition, Subtraction and Products of Vectors and Simple applications to

Geometry.

4. Calculus.—Functions, Sequences, Series, Limits, Continuity, Derivatives. Application of

Derivatives.—Rates of change, Tangents, Normals, Maxima, Minima, Rolle’s Theorem,

Mean Value Theorems of Lagrange and Cauchy, Asymptotes, Curvature, methods of

finding indefinite integrals, Definite Integrals, Fundamental Theorem of Integral Calculus.

Application of definite integrals to area, length of a plane curve, Volume and Surfaces of

revolution.

5. Ordinary Differential Equations.—Order and Degree of a Differential Equation, First

Order Differential Equations, Singular solution, Geometrical interpretation, Second order

equations with constant co-efficients.

6. Mechanics.—Concepts of particles-Lamina; Rigid Body; Displacements; Force; Mass;

Weight; Motion; Velocity; Speed; Acceleration; Parallelogram of forces; Parallelogram of

velocity, acceleration; resultant; equilibrium of coplanar forces; Moments; Couple; Friction;

Centre of mass, Gravity; Laws of Motion; Motion of a particle in a straight line; Simple

Harmonic Motion; Motion under conservative forces; Motion under gravity; Projectile;

Escape velocity; Motion of artificial satellites.

7. Elements of Computer Programming.—Binary system, Octal and Hexadecimal

systems. Conversion to and from Decimal systems. Codes, Bits, Bytes and Words.

Memory of a computer, Arithmetic and Logical operations on numbers. Precisions. AND ;

OR, XOR, NOT and Shift/Rotate operators, Algorithms and Flow Charts.

[48]

PHILOSOPHY—CODE NO. (11)

Section A : Problems of Philosophy

1. Substance and Attributes : Aristotle, Descartes, Locke, Berkeley’s criticism, Nyaya-

Vaisesika, Buddhist criticism of Pudgala.

2. God, Soul and the World : Thomas Acquinas, St. Augustine, Spinoza, Descartes, Nyaya-

Vaisesika, Sankara, Ramanuja.

3. Universals : Realism and Nominalism (Plato, Aristotle, Berkeley’s criticism of abstract

ideas, Nyaya-Vaisesika, Buddhism).

4. Bases of Knowledge : Pramanavada in Carvaka, Nyaya-Vaisesika, Buddhism, Advaita

Vedanta.

5. Truth and Error : Correspondence Theory, Coherence Theory, Pragmatic Theory;

Khyativada (Anyathakhyati, Akhyati, Anirvacaniyakhyati).

6. Matter and Mind : Descartes, Spinoza, Leibnitz, Berkeley.

Section B : Logic

1. Truth and Validity.

2. Classification of sentences : Traditional and Modern.

3. Syllogism : Figures and Moods; Rules of Syllogism (General and special) validation by Venn Diagrammes; Formal Fallacies.

4. Sentential Calculus : Symbolisation; Truth-Functions and their interdefinability; Truth

Tables; Formal Proof.

Section C : Ethics

1. Statement of fact and statement of value.

2. Right and Good; Teleology and Deontology.

3. Psychological Hedonism.

4. Utilitarianism (Bentham; J.S. Mill).

5. Kantian Ethics.

6. Problem of the freedom of will.

7. Moral Judgements : Descriptivism, Prescriptivism, Emotivism.

8. Niskamakrama : Sthitaprajna.

9. Jaina Ethics.

10. Four Noble Truths and Eight fold path in Buddhism.

11. Gandhian Ethics : Satya, Ahimsa, Ends and Means.

[49]

PHYSICS—CODE NO. (12)

1. Mechanics and Waves :

Dimensional analysis. Newton’s laws of motion and applications, variable mass systems,

projectiles. Rotational dynamics-kinetic energy, angular momentum, theorems of moment of

inertia and calculations in simple cases. Conservative forces, frictional forces. Gravitational

potential and intensity due to spherical objects. Central forces, Kepler’s problem, escape

velocity and artificial satellites (including GPS). Streamline motion, viscosity, Poiseuille’s

equation. Applications of Bernoulli’s equation and Stokes’ law.

Special relativity and Lorentz transformation-length contraction, time dilation, mass-energy

relation.

Simple harmonic motion, lissajous figures. Damped oscillation, forced oscillation and

resonance. Beats, Phase and group velocities. Stationary waves, vibration of strings and air

columns, longitudinal waves in solids. Doppler effect. Ultrasonics and applications.

2. Geometrical and Physical Optics :

Laws of reflection and refraction from Fermat’s principle. Matrix method in paraxial optics—

thin lens formula, nodal planes, system of two thin lenses. Chromatic and spherical

aberrations. Simple optical instruments-magnifier, eyepieces, telescopes and microscopes.

Huygens’ principle—reflection and refraction of waves. Interference of light—Young’s

experiment, Newton’s rings, interference by thin films. Michelson interferometer. Fraunhofer

diffraction—single slit, double slit, diffraction grating, resolving power. Fresnel diffraction—

half-period zones and zone plate. Production and detection of linearly, circularly and

elliptically polarised light. Double refraction, quarter—wave plates and half-wave plates.

Polarizing sheets. Optical activity and applications. Raman & Rayleigh scattering and

applications.

Elements of fibre optics—attenuation; pulse dispersion in step index and parabolic index

fibres; material dispersion. Lasers, characteristics of laser light—spatial and temporal

coherence. Focussing of laser beams and applications.

3. Heat and Thermodynamics :

Thermal equilibrium and temperature. The zeroth law of thermodynamics. Heat and the first

law of thermodynamics. Efficiency of Carnot engines. Entropy and the second law of

thermodynamics. Kinetic theory and the equation of state of an ideal gas. Mean free path,

distribution of molecular speeds and energies. Transport phenomena. Andrew’s

experiements—van der Waals equation and applications. Joule—Kelvin effect and

applications. Brownian motion. Thermodynamic potentials—Maxwell relations. Phase

transitions. Kirchhoff’s laws. Black-body radiation—Stefan-Boltzmann law, spectral radiancy,

Wien displacement law, application to the cosmic microwave background radiation, Planck

radiation law.

4. Electricity and Magnetism :

Electric charge, Coulomb’s law, electric field, Gauss’ law. Electric potential, van de Graaff

accelerator. Capacitors, dielectrics and polarization. Ohm’s law, Kirchhoff’s first and second

rules, resistors in series and parallel, applications to two-loop circuits. Magnetic field—

[50]

Gauss’law for magnetism, atomic and nuclear magnetism, magnetic susceptibility,

classification of magnetic materials. Circulating charges, cyclotron, synchrotron. Hall effect.

Biot-Savart law, Ampere’s law, Faraday’s law of induction, Lenz’s law. Inductance. Alternating

current circuits-RC. LR, single-loop LRC circuits, impedance, resonance, power in AC circuits.

displacement current, Maxwell’s equations (MKS units), electromagnetic waves, energy,

transport and poynting vector.

5. Atomic and Nuclear Physics :

Photoelectric effect, Einstein’s photon theory. Bohr’s theory of hydrogen atom. Stern-Gerlack

experiment, quantisation of angular momentum, electron spin. Pauli exclusion principle and

applications. Zeeman effect. X-ray spectrum, Bragg’s law, Bohr’s theory of the Mosley plot.

Compton effect, Compton wave length. Wave nature of matter, de Broglie wavelength, wave-

particle duality. Heisenberg’s uncertainty relationships. Schroedinger’s equation—eigenvalues

and eigenfunctions of (i) particle in a box, (ii) simple harmonic oscillator and (iii) hydrogen

atom. Potential step and barrier penetration. Natural and artificial radioactivity. Binding energy

of nuclei, nuclear fission and fusion. Classification of elementary particles and their

interactions.

6. Electronics :

Diodes in half-wave and full-wave rectification, qualitative ideas of semiconductors, p type and

n type semiconductors, junction diode, Zener diode, transistors, binary numbers, Logic gates

and truth tables, Elements of microprocessors and computers.

[51]

POLITICAL SCIENCE—CODE NO.(13)

Section—A

1. Political Science.—Nature & scope of the discipline, relationship with allied disciplines

like History, Economics, Philosophy, Sociology, Psychology.

2. Meaning of Politics.—Approaches to the study of Politics.

3. Key Concepts.—State, Society, Sovereignty, Power, Citizenship, Nation, Global order

and Imperialism.

4. Political Ideas.—Rights, Liberty, Equality, Justice, Rule of Law. Civil Society Swaraj,

Revolution, Democratic Participation.

5. Democracy.—Meaning and Theories of Democracy, Electoral system, Forms of

Representation & Participation, Political accountability.

6. Political Ideologies.—Liberalism, Neoliberalism, Marxism, Socialism, Fascism,

Gandhism.

7. Party System and Political Process.—Theories of Party System, National and

regional parties, Political Parties in the Third World. Patterns of coalition politics, interest

and pressure groups.

8. Forms of Government.—Parliamentary and Presidential. Federal & unitary Modes of

decentralisation.

9. Bureaucracy Concept.—Theories, Weber and critiques of Bureaucracy.

10. Theories of Development.—Meaning and various approaches. Concept and Theories

of under development Debates in the Third World.

11. Social Movements.—Meaning, Theories & Forms, Role of Environmental Feminist

Peasant & workers movements, Role of Non-Governmental organisation.

12. Nationalism and Internationalism :

13. Major theories of International relations.—Realist Marxist, Systems & Decision

making & Game theory.

14. State and the Global order.—Neo-Liberalism, globalisation, structural adjustment,

regional economic integration, Nature and Impact of globalisation.

Section—B

Indian Government and Politics

1. Approaches to the study of Governments.—Comparative historical, legal,

institutional, Political economy and Political sociology, approaches.

2. Classification of Political Systems.—Democratic and Authoritarian, characteristics of

political systems in the third world.

3. Typologies of constitutions; Basic features of these constitutions &

Governments.—including U.K., USA. France, Germany, China, and South Africa.

4. Constitutional development.—In India during British Rule—A historical perspective.

[52]

5. Constituent Assembly.—philosophical and socio-economic dimensions, salient

features of the Indian Constitution.

6. Nature of Indian federalism.—Centre-state relations, legislative, administrative,

financial and political; politics of regional move and National Integration.

7. Fundamental Rights.—Constitutional provisions and political dynamics, Judicial

Interpretations and socio political realities; Fundamental duties.

8. The Union Executive.—President, Prime Minister and the Council of Ministers,

Constitutional provisions & framework and political trends.

9. Parliament.—Powers and functions of the Lok Sabha & Rajya Sabha; Parliamentary

Committees; Functioning of the Parliamentary system in India.

10. The Judiciary.—The Supreme Court, Judicial Review, Judicial Activism, Public Interest

litigation; Judicial Reforms.

11. The State Executive.—Governor, Chief Minister and the Council of Ministers;

Constitutional provisions and political trends.

12. Indian Party System.—Evolution and contemporary trends; coalition Governments at

the Centre and States, pressure groups in Indian politics.

13. The interaction of Government & Scientific & Technology business.—Previous and

now their inter-relationship and changing roles in society, elites, Role of pressure groups

class and voluntary associations in society.

14. Local Government & Politics.—Panchayati Raj and Municipal Government, structure

Powers & functions. Political realities, Significance of 73rd and 74th Amendments, role

of women in Panchayats.

15. Bureaucracy and Development.—Post-colonial India; its changing role in the context

of liberatis after, bureaucratic Accountability.

16. Challenges to Indian Democracy :

(a) Communalism, Regionalism violence, criminalisation and corruption.

(b) Regional disparities, environmental degradation, illiteracy, Mass poverty,

Population, growth, caste oppressions and socio- economic inequalities among

backward classes.

[53]

PSYCHOLOGY—CODE NO. (14)

1. Introduction to psychology.—Concept and definition of psychology. Nature and

Scope. Branches of psychology. Application of psychology to society and social

problems.

2. Methods in Psychology.—Characteristics of psychological studies, Observation.

Survey method, Clinical and case study method. Experimental method. Application of

the method.

3. Quantitative Analysis.—Measures of central tendency and dispersion. Correlation.

Levels of measurement. Reliability and validity. Application in test construction.

4. Physiological Psychology.—Structure of neuron, nerve impulses, synapse and

neurotransmitters. Central and peripheral nervous system—Structure and neural control

of behaviour. Hemispheric specialisation. Endocrine system and hormonal control of

behaviour. Application of hemispheric knowledge to diagnostic purposes.

5. Development of human behaviour.—Individual Differences : Heredity and

environment. Life span development. Role of early experience and mastering of

developmental tasks. Sensitive or critical periods of development in human life cycle

and its application.

6. Perception.—Perceptual processes. Perceputal organisation. Perception of form,

colour, depth and time. Perceptual readiness and constancy. Role of motivation, social

and cultural factors in perception. Application of knowledge of perception to skill

development (e.g. for certain jobs like that of driving, airline pilots etc.)

7. Learning.—Classical conditioning and operant conditioning. Modeling and

observational learning. Transfer of training. Learning and motivation. Application of the

above to the improvement of academic performance in education.

8. Memory.—Physiological basis of memory. Memory and forgetting. Measurement of

memory (Recall, Recognition, Relearning). Short term and long term memory. Theories

of forgetting (Decay and Interference theories and Repressive forgetting). Application of

Mnemonic devices etc. to improving memory.

9. Cognition and Language.—Concept of formation. Nature and development of thinking.

Language and thought and acquisition of language. Problem solving. Creative thinking

and its applications.

10. Intelligence and Aptitude.—Definition and concept. Theories and models of

Intelligence. Measurement of intelligence and aptitude. Exceptional intelligence. Mental

retardation. Concepts of multiple, emotional and artificial intelligence and their

application.

11. Motivation and Emotion.—Definition and concept of instinct, needs, drives and

motives. Theories of motivation and their application (drive reduction theory, Maslow’s

motivational hierarchy). Social motivation: Achievement, power, affiliation motives and

influence of early experiences. Physiological basis of emotion. Theories of emotion

(James-Lange and Cannon-Bard theories, cognitive physiological theory).

12. Personality.—Concepts and Definition of personality. Study of personality (Trait, type

and electric approaches) Development of personality (Freud, Erikson, Biological and

socio-cultural determinants). Measurement of Personality (Projective tests, pencil-paper

tests). Application of personality profiles in fitting a person to a job.

[54]

13. Adjustment and Stress.—Concept and definition. Factors affecting adjustment

(frustration and conflict). Sources of stress and reactions to stress. Coping with stress.

Application of stress management techniques.

14. Social Behaviour.—Socio-cultural factors and behaviour, Development of attitudes,

stereotypes and prejudice, Measurement of Attitudes (Thurstone, Likert attitude scales

and Bogardus Social Distance scale). Strategies for reducing prejudice and changing

attitude. Person perception, implicit personality theory and integrating impressions.

Application of person perception to impression management.

15. Application of Psychology.—Health and mental health (yoga, meditation and

relaxation therapies). Education (Programmed learning, self instructional learning and

learning styles). Community (self help through group cohesiveness and leadership).

Industry (Assessment center approach in selection, recruitment and training).

Environment (man-nature interaction, personal space concept, pollution reduction).

Information Technology (Application to commercial, educational and health areas).

[55]

PUBLIC ADMINISTRATION—CODE NO. (15)

1. Introduction.—Meaning, scope and significance. Evolution and status of discipline. Comparative Public Administration and Development Administration. Public and Private Administration; State versus market debate. New Public Administration. New Public Management perspective.

2. Basic concepts and principles.—Organisation, hierarchy, Unit of Command, Span of Control, Authority and Responsibility, Co-ordination, Centralization and Decentralization, Delegation, Supervision, Line and Staff.

3. Theories of Administration.—Scientific Management (Taylor and the Scientific Management Movement), Classical Theory (Fayol, Urwick, Gulick and others), Bureaucratic Theory (Weber and his critics). Ideas of Mary Parker Follett and C.I. Barnard; Human Relations School (Elton Mayo and others). Behavioral Approach and Systems approach.

4. Administrative Behaviour.—Decision making with special reference to H. Simon, communication and control, leadership theories. Theories of motivation (Maslow and Herzberg)

5. Accountability and Control.—The concepts of Accountability and control. Legislative, executive and judicial control. Citizen and Administration: Role of civil society, people’s participation and Right to Information.

6. Administrative Systems.—Comparative administrative features of USA, Great Britain, France and Japan.

7. Personnel Administration.—Role of Civil Service in developing societies; position classification, Recruitment, Training, Promotion, Pay and Service condition. Relations with the Political Executive; Administrative Ethics.

8. Financial Administration.—Budget, Concepts and forms. Formulation and execution of budget, Deficit Financing and Public Debt, Accounts and Audit.

9. Union Government and Administration in India.—British legacy Constitutional context of Indian Administration; The President, Prime Minister and the Council of Ministers; Central Secretariat; Cabinet Secretariat, Prime Minister’s Office, Planning Commission; Finance Commission; Election Commission; Comptroller and Auditor-General of India. Public Enterprises: Patterns, role, performance and impact of liberalisation.

10. Civil Services in India.—Recruitment of All India and Central Services. Union Public Service Commission; Training of Civil Servants. Generalists and Specialists. Minister—Civil Servant relationship.

11. State and District Administration.—Governor, Chief Minister, Secretariat, Chief Secretary, Directorates, District Collector: changing role.

12. Local Government.—Panchayati Raj and Urban Local Government: Main features, structures, finance and problem areas. 73rd and 74th Constitutional Amendements.

[56]

SOCIOLOGY—CODE NO. (16)

Unit I : Basic Concepts :

Society, community, association, institution, Culture—culture change, diffusion,

Cultural—tag, Cultural relativism, ethnocentrism, acculturation.

Social Groups—primary, secondary and reference groups.

Social structure, social system, social action.

Status and role, role conflict, role set.

Norms and values—conformity and deviance, Law and customs.

Socio-cultural processes :

socialisation, assimilation, integration, cooperation, competition, conflict, accommodation,

social distance, relative deprivation.

Unit II : Marriage, Family and Kinship :

Marriage : types and forms, marriage as contract, and as a sacrament.

Family : types, functions and changes.

Kinship : terms and usages, rules of residence, descent, inheritance.

Unit III : Social Stratification :

Forms and functions; Caste and Class. Jajmani system, purity and pollution, dominant

caste, sanskritisation.

Unit IV : Types of Society :

Tribal, agrarian, industrial and post-industrial.

Unit V : Economy and Society :

Man, nature and social production, economic systems of simple and complex societies,

non-economic determinants of economic behaviour, market (free) economy and

controlled (planned) economy.

Unit VI : Industrial and Urban Society :

Rural—Urban Continuum, urban growth and urbanisation—town, city and metropolis;

basic features of industrial society; impact of automation of society; industrialisation and

environment.

Unit VII : Social Demography :

Population size, growth, composition and distribution in India; components of population

growth—births, deaths and migration; causes and consequences of population growth;

population and social development; population policy.

[57]

Unit VIII : Political Processes :

Power, authority and legitimacy; political socialisation; political modernisation, pressure

groups; caste and politics.

Unit IX : Weaker Sections and Minorities :

Social justice—equal opportunity and special opportunity; protective discrimination;

constitutional safeguards.

Unit X : Social Change :

Theories of change; factors of change; science, technology and change. Social

movements—Peasant Movement, Women’s Movement, Backward Caste Movement,

Dalit Movement.

[58]

STATISTICS—CODE NO. (17)

Probability :

Random experiment, sample space, event, algebra of events, probability on a discrete sample space, basic theorems of probability and simple examples based thereon, conditional probability of an event, independent events, Bayes’ theorem and its application, discrete and continuous random variables and their distributions, expectation, moments, moment generating function, joint distribution of two or more random variables, marginal and conditional distributions, independence of random variables, covariance, correlation, co-efficient, distribution of function of random variables. Bernoulli, binomial, geometric, negative binomial, hypergeometric, Poisson, multinomial, uniform, beta, exponential, gamma, Cauchy, normal, lognormal and bivariate normal distributions, real-life situations where these distributions provide appropriate models, Chebyshev’s inequality, weak law of large numbers and central limit theorem for independent and identically distributed random variables with finite variance and their simple applications.

Statistical Methods :

Concept of a statistical population and a sample, types of data, presentation and summarization of data, measures of central tendency, dispersion, skewness and kurtosis, measures of association and contingency, correlation, rank correlation, intraclass correlation, correlation ratio, simple and multiple linear regression, multiple and partial correlations (involving three variables only), curve-fitting and principle of least squares, concepts of

random sample, parameter and statistic, Z, X2, t and F statistics and their properties and applications, distributions of sample range and median (for continuous distributions only), censored sampling (concept and illustrations).

Statistical Inference :

Unbiasedness, consistency, efficiency, sufficiency, Completeness, minimum variance

unbiased estimation, Rao-Blackwell theorem, Lehmann-Scheffe theorem, Cramer-Rao

inequality and minimum variance bound estimator, moments, maximum likelihood, least

squares and minimum chisquare methods of estimation, properties of maximum likelihood

and other estimators, idea of a random interval, confidence intervals for the Parameters of

standard distributions, shortest confidence intervals, large-sample confidence intervals.

Simple and composite hypotheses, two kinds of errors, level of significance, size and power of

a test, desirable properties of a good test, most powerful test, Neyman-Pearson lemma and

its use in simple examples, uniformly most powerful test, likelihood ratio test and its properties

and applications.

Chi-square test, sign test, Wald-Wolfowitz runs test, run test for randomness, median test,

Wilcoxon test and Wilcoxon-Mann-Whitney test.

Wald’s sequential probability ratio test, OC and ASN functions, application to binomial and

normal distributions.

Loss function, risk function, minimax and Bayes rules.

Sampling Theory and Design of Experiments :

Complete enumeration vs. sampling, need for sampling, basic concepts in sampling,

designing large-scale sample surveys, sampling and non-sampling errors, simple random

sampling, properties of a good estimator, estimation of sample size, stratified random

[59]

sampling, systematic sampling, cluster sampling, ratio and regression methods of estimation

under simple and stratified random sampling, double sampling for ratio and regression

methods of estimation, two-stage sampling with equal-size first-stage units.

Analysis of variance with equal number of observations per cell in one, two and three-way

classifications, analysis of covariance in one and two-way classifications, basic priniciples of

experimental designs, completely randomized design, randomized block design, latin square

design, missing plot technique, 22 factorial design, total and partial confounding, 32 factorial

experiments, split-plot design and balanced incomplete block design.

[60]

ZOOLOGY—CODE NO. (18)

I. Cell structure and function:

(a) Prokaryote and eukaryote.

(b) Structure of animal cell, structure and functions of cell organelles.

(c) Cell cycle—mitosis, meiosis.

(d) Structure and contents of nucleus including nuclear membrane, structure of

chromosome and gene, chemistry of genetic components.

(e) Mendel’s laws of inheritance, linkage and genetic recombination; cytoplasmic

inheritance.

(f) Function of gene: replication, transcription and translation; mutations (Spontaneous

and artificial); Recombinant DNA: principle and application.

(g) Sex determination in Drosophila and man; sex linkage in man.

II. Systematics :

(a) Classification of non-chordates (up to sub-classes) and chordates (up to orders)

giving general features and evolutionary relationship of the following phyla:

Protozoa, Porifera, Coelenterata, Platyhelminthes, Nemathelminthes, Annelida,

Arthropoda, Mollusca, Echinodermata, Minor phyla (Bryozoa, Phoronida and

Chaetognatha) and Hemichordata.

(b) Structure reproduction and life history of the following types:

Amoeba, Monocystis, Plasmodium, Paramaecium, Sycon, Hydra, Obelia, Fasciola,

Taenia, Ascaris, Neanthes, Pheretima, Hirudinia, Palaemon, Buthus, Periplaneta,

Lamellidens, Pila, Asterias and Balanoglossus.

(c) Classification of chordates (up to orders), giving general features and evolutionary

relationship of the following: Protochordata; Agnatha; Gnathostomata—Pisces,

Amphibia, Reptilia, Aves and Mammalia.

(d) Comparative functional anatomy of the following based on type animals (Scoliodon,

Rana, Calotes, Columba and Oryctolagus): integument and its derivatives,

endoskeleton, digestive system, respiratory system, circulatory system including

heart and aortic arches, urinogenital system; brain and sense organs (eye and ear);

endocrine glands and other hormone producing structures (pituitary, thyroid,

parathyroid, adrenal, pancreas, gonads) their function.

III. Vertebrate Physiology and Biochemistry :

(a) Chemical composition of protoplasm; nature and function of enzymes, vitamins, their sources and role; colloids and hydrogen ion concentration; biological oxidation, electron trasport and role of ATP, energetics, glycolysis, citric acid cycle; vertebrate hormones; their type, sources and fucntions; pheromones and their role.

(b) Neuron and nerve impulse—conduction and transmission across synapses; neurotrasmitters and their role, including acetyl cholinesterase activity.

(c) Homeostasis; osmoregulation; active transport and ion pump.

(d) Composition of carbohydrates, fats, lipids and proteins; steroids.

[61]

IV. Embryology :

(a) Gametogenesis, fertilization, cleavage; gastrulation in frog and chick.

(b) Metamorphosis in frog and retrogressive metamorphosis in ascidian; extra-embryonic membranes in chick and mammal; placentation in mamals; Biogenetic law.

V. Evolution :

(a) Origin of life; principles, theories and evidences of evolution; species concept.

(b) Zoogeographical realms, insular fauna; geological eras.

(c) Evolution of man; evolutionary status of man.

VI. Ecology, Wildlife and Ethology :

(a) Abiotic and biotic factors; concept of ecosystem, food chain and energy flow; adaptation of aquatic, terrestrial and aerial fauna; intra-and inter-specific animal relationships; environmental pollution: types, sources, causes, control and prevention.

(b) Wildlife of India; endangered species of India; sanctuaries and national parks of India.

(c) Biological rhythms.

VII. Economic Zoology :

(a) Beneficial and harmful insects including insect vectors of human diseases.

(b) Industrial fish, prawn and molluses of India.

(c) Non-poisonous and poisonous snakes of India.

(d) Venomous animals—centipede, wasp, honey bee.

(e) Diseases causd by aberrant chromosomes/genes in man; genetic counselling; DNA as a tool for forensic investigation.

[62]

ANIMAL HUSBANDRY AND VETERINARY SCIENCE—CODE NO. (19)

Animal Husbandry :

1. General.—Role of Livestock in Indian Economy and human health. Mixed farming. Agroclimatic zones and livestock distribution. Socio-economic aspects of livestock enterprise with special reference to women.

2. Genetics and Breeding.—Principle of genetics, chemical nature of DNA and RNA and their models and functions. Recombinant DNA technology, transgenic animals. Multiple ovulation and embryo-transfer.

Cytogenetics, Immunogenetics and biochemicals polymorphism and their application in animal improvement. Gene actions. Systems and strategies for improvement of livestock for milk, meat, wool production and draught and poultry for eggs and meat. Breeding animals for disease resistance. Breeds of livestock, poultry and rabbits.

3. Nutrition.—Role of nutrition in animal health and production. Classification of feeds, Proximate composition of feeds. Feeding standards, Computation of rations. Ruminant- nutrition. Concepts of total digestible nutrients and starch equivalent systems. Significance of energy determinations. Conservation of feeds and fodder and utilization of agro by products. Feed supplements and additives. Nutrition deficiencies and their management.

4. Management.—System of housing and management of livestock, poultry and rabbits. Farm records. Economics of livestock, poultry and rabbit farming. Clean milk production. Veterinary hygiene with reference to water, air and habitation. Sources of water and standards of potable water. Purification of water. Air changes and thermal comfort. Drainage systems and effluent disposal. Biogas.

5. Animal Production.—

(a) Artificial insemination, fertility and sterility. Reproductive physiology, semen—characteristics and preservation. Sterility—its causes and remedies.

(b) Meal, eggs and wool production. Methods of slaughter of meat animals, meat inspection, judgement, carcass characteristics, adulteration and its detection processing and preservation. Meal products, quality control and nutritive value, by-products. Physiology of egg production, nutritive value, grading of eggs preservation and marketing. Types of wool, grading and marketing.

6. Veterinary Science.—

(i) Major contagious diseases affecting cattle, buffaloes, horses, sheep and goats, pig,

poultry, rabbits and pet animals—Etiology, symptoms, pathogenicity, diagnosis,

treatment and control of major bacterial viral, rickettsial and parasitic infections.

(ii) Description, symptoms, diagnosis and treatment of the following :—

(a) Production diseases of milch animals, pig and poultry.

(b) Deficiency diseases of domestic livestock and birds.

(c) Poisonings due to infected/contaminated foods and feeds, chemicals and drugs.

7. Principles of immunization and vaccination.—Different types of immunity, antigens

and antibodies. Methods of immunization. Breakdown of immunity, Vaccines and their use

in animals. Zoonoses, Foodborne infections and intoxications, occupation hazards

[63]

8. (a) Poisons used for killing animals—euthanasia.

(b) Drugs used for increasing production/performance efficiency and their adverse

effects.

(c) Drugs used to tranquilize wild animals as well as animals in captivity.

(d) Quarantine measures in India and abroad. Act, Rules and Regulations.

9. Dairy Science.—Physico—chemical and nutritional properties of milk.

Quality assessment of milk and milk products, Common tests and legal standards.

Cleaning and sanitization of dairy equipment. Milk collections, chilling, transportation

processing, packaging, storage and distribution. Manufacture of market milk, cream

butter, cheese, ice-cream, condensed and dried milk, by products and Indian Milk

products.

Unit operations in dairy plant.

Role of micro-organisms in quality of milk and milks products.

Physiology of milk secretion.

[64]

CIVIL ENGINEERING CODE NO. (20)

PART-A

1. Engineering Mechanics :

Units and Dimensions, SI Units, Vectors, Concept of Force, Concept of particle and rigid

body. Concurrent, non-concurrent and parallel forces in a plane, moment of force and

Varignon’s theorem, free body diagram, conditions of equilibrium, Principle of virtual work,

equivalent force system.

First and Second Moments of area, Mass moment of Inertia.

Static Friction Inclined plane and bearings.

Kinematics and Kinetics : Kinematics in cartesian and polar co-ordinates, motion under

uniform and non-uniform acceleration, motion under gravity. Kinetics of particle : Momentum

and Energy principles, ‘D’ Alembert’s Principle, Collision of elastic bodies, rotation of rigid

bodies, simple harmonic motion.

2. Strength of Materials :

Simple Stress and Strain, Elastic constants, axially loaded compression members, Shear

force and bending moment, theory of simple bending, Shear Stress distribution across cross

sections, Beams of uniform strength, Leaf spring, Strain Energy in direct stress, bending and

shear.

Deflection of beams :

Macaulay’s method, Mohr’s moment area method, Conjugate beam method, unit load

method. Torsion of Shafts, Transmission of power, closecoiled helical springs, Elastic stability

of columns : Euler’s, Rankine’s and Secant formulae. Principal stresses and strains in two

dimensions, Mohr’s Circle. Theories of Elastic Failure, Thin and Thick cylinders : Stresses due

to internal and external pressures—Lame’s equations.

3. Structural Analysis :

Analysis of pin jointed plane trusses, deflection in trusses. Three hinged and two hinged

arches, rib shortening, temperature effects, influence lines in arches. Analysis of propped

cantilevers, fixed beams, continuous beams and rigid frames. Slope deflection, moment

distribution, Kani’s method and Matrix method : Force and Displacement Methods. Rolling

loads and influence lines for determinate beams and pin jointed trusses.

PART-B

Geotechnical Engineering:—Types of soil, field identification and classification, phase

relationships, consistency limits, particle size distribution, classification of soil, structure and

clay mineralogy.

Capillary water and structural water, effective stress and pore water pressure, Darcy’s Law,

factors affecting permeability, determination of permeability, permeability of stratified soil

deposits.

Seepage pressure, quick sand condition, compressibility and consolidation, Terzaghi’s theory

of one dimensional consolidation, consolidation test. Compaction of soil, optimum moisture

content, Proctor Density.

[65]

Subsurface exploration, methods of boring, sampling, types of sampler, field tests.

Shear strength of soils, Mohr-Coulomb failure theory, shear tests.

Earth pressure at rest, active and passive pressure, Rankine’s theory, Coulomb’s wedge

theory, earth pressure on retaining wall.

Bearing capacity, Terzaghi and other important theories, net and gross bearing pressure,

Immediate and consolidation settlement.

Load carrying capacity of pile groups.

Stability of slope-Conventional method of slices, stability numbers.

Transportation Engineering :

Highway alignment, choice of layout and capacity of highways, location survey, geometric

design of highways—various elements, curves, grade separation and segregation of traffic,

intersection design, highway materials and testing subgrade and pavement components,

types of pavements, road drainage, elements of airport engineering.

Railway engineering-elements of permanent track-rails, sleepers, ballast and rail fastenings,

tractive resistance, elements of geometric design—gradients and grade compensation on

curves, cant transition curves and vertical curves, stresses in railway tracks, points and

crossings, signalling and interlocking, maintenance of railway track. Culverts and small

bridges.

PART-C

Fluid Mechanics:—Fluid properties, fluid statics, forces on plane and curved surfaces,

stability of floating and submerged bodies.

Kinematics:—Velocity, streamlines, continuity equation, accelerations irrotational and

rotational flow, velocity potential and stream functions, flownet, separation.

Dynamics:—Euler’s equation along streamline, control volume equation, continuity,

momentum, energy and moment of momentum equation from control volume equation,

applications to pipe flow, moving vanes, moment of momentum, Dimensional analysis.

Boundary layer on a flat plate, drag and lift on bodies. Laminar and Turbulent Flows. Laminar

and turbulent flow through pipes, friction factor variation, pipe networks, water hammer, and

surge tanks.

Open Channel Flow: Energy and momentum correction factors, uniform and non-uniform

flows, specific energy and specific force, critical depth, friction factors and roughness

coefficients, flow in transitions, free overfall, weirs, hydraulic jump, surges, gradually varied

flow equations, surface profiles, moving hydraulic jump.

PART-D

Environmental Engineering :

Water Supply:—Estimation of surface and subsurface water resources, predicting demand for

water, impurities of water and their significance, physical, chemical and bacteriological

analysis, water borne diseases, standards for potable water.

[66]

Intake of water:—pumping and gravity schemes, water treatment: principles of coagulation,

flocculation and sedimentation; slow-, rapid-, pressure, filters; chlorination, softening, removal

of taste, odour and salinity.

Water storage and distribution: Storage and balancing reservoir types, location and capacity.

Distribution systems: layout, hydraulics of pipe lines, pipe fittings, valves including check and

pressure reducing valves, meters, analysis of distribution systems, leak detection,

maintenance of distribution systems, pumping stations and their operations.

Sewerage systems:—Domestic and industrial wastes, storm sewage—separate and

combined systems, flow through sewers, design of sewers, sewer appurtenances, manholes,

inlets, junctions, siphon. Plumbing in Public buildings.

Sewage characterisation:—BOD, COD, solids, dissloved oxygen, nitrogen and TOC.

Standards of disposal in normal water course and on land.

Sewage treatment:—Working principles, units, chambers, sedimentation tank, trickling filters,

oxidation ponds, activated sludge process, septic tank, disposal of sludge, recycling of waste

water.

Construction Management :

Elements and principles of Activity on Arrow (AOA) and Activity on Node (AON) networks and

work breakdown structure. Interfaces. Ladder networks. Activity time. Time computations and

Floats. ATC and PTC trade-off. Work study and sampling. Scheduling principles-Material

schedules. ABC and EOQ analysis of inventory. Budgeting with barcharts. Working capital.

PERT, probability of completion.

Elements of Engineering Economics, methods of appraisal, present worth, annual cost,

benefit-cost, incremental analysis. Economy of scale and size. Choosing between alternatives

including levels of investments. Project profitability.

[67]

ELECTRICAL ENGINEERING—CODE NO. (21)

Electrical Circuits—Theory and Applications :

Circuit components, network graphs, KCL, KVL; circuit analysis methods: nodal analysis,

mesh analysis; basic network theorems and applications; transient analysis : RL, RC and RLC

circuits; sinusoidal steady state analysis; resonant circuits and applications; coupled circuits

and applications; balanced 3-phase circuits. Two port networks, driving point and transfer

functions; poles and zeros of network functions.

Signals & Systems :

Representation of continuous-time and discrete-time signals & systems; LTI systems;

convolution; impulse response; time-domain analysis of LTI systems based on convolution

and differential/difference equations. Fourier transform, Laplace transform, Z-transform,

Transfer function. Sampling and recovery of signals.

Control Systems :

Elements of control systems; block-diagram representations; open-loop & closed-loop

systems; principles and applications of feed-back. LTI systems : time domain and transform

domain analysis. Stability : Routh Hurwitz criterion, root-loci, Nyquist’s criterion Bode-plots,

Design of lead-lag compensators; Proportional, PI, PID controllers.

E-M Theory :

Electro-static and magneto-static fields; Maxwell’s equations; e.m. waves and wave

equations; wave propagation and antennas; transmission lines; micro-wave resonators,

cavities and wave guides.

Electrical Engineering Materials :

Electrical/electronic behaviour of materials : conductivity; free-electrons and band-theory;

intrinsic and extrinsic semi-conductor, p-n junction; solar cells, super-conductivity. Dielectric

behaviour of materials : polarization phenomena; piezo-electric phenomena. Magnetic

materials: behaviours and application.

Analog Electronics :

Diode circuits: Rectifiers filters, clipping and clamping, zener diode and voltage regulation.

Bipolar and field effect transistors (BJT, JFET and MOSFET) : Characteristics, biasing and

small signal equivalent circuits. Basic amplifier circuits; differential amplifier circuits. Amplifiers

: analysis, frequency response. Principles of feedback; OPAMP circuits; filters; oscillators.

Digital Electronics :

Boolean algebra; minimisation of Boolean functions; logic gates, digital IC families (DTL, TTL,

ECL, MOS, CMOS). Combinational circuits : arithmetic circuits, code converters, multiplexers

and decoder’s. Sequential circuits : latches and flip-flops, counters and shift-registers.

Comparators, timers, multivibrators. Sample and hold circuits; ADCs and DACs. Semi-

conductor memories.

Communication Systems :

Fourier analysis of signals : amplitude, phase and power spectrum, auto-correlation and

cross-correlation and their Fourier transforms. Analog modulation systems : amplitude and

angle modulation and demodulation systems, spectral analysis; superheterodyne receivers.

[68]

Pulse code modulation (PCM), differential PCM, delta modulation. Digital modulation

schemes : amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK).

Multiplexing : time-division, frequency-division. Additive Gaussian noise : characterization

using correlation, probability density function, power spectral density, Signal-to-noise ratio

calculations for AM and FM. Elements of digital communication systems : source coding,

channel coding; digital modulation & demodulation. Elements of Information theory, channel

capacity. Elements of satellite and mobile communication; principles of television engineering;

radar engineering and radio aids to navigation.

Computers and Microprocessors :

Computer organization : number representation and arithmetic, functional organization,

machine instructions, addressing modes, ALU, hardwired and microprogrammed control,

memory organization. Elements of microprocessors. 8-bit microprocessors -architecture,

instruction set, assembly level programming, memory, I/O interfacing, microcontrollers and

applications.

Measurement and Instrumentation :

Error analysis; measurement of current voltage, power, energy, power-factor, resistance,

inductance, capacitance and frequency; bridge measurements. Electronic measuring

instruments: multimeter, CRO, digital voltmeter, frequency counter, Q-meter, spectrum-

analyser, distortion-meter. Transducers: thermocouple, thermistor, LVDT, strain-guages,

piezo-electric crystal. Use of transducers in measurements of non-electrical quantities. Data-

acquisition systems.

Energy Conversion :

Single-phase transformer : equivalent circuit, phasor-diagram, tests, regulation and efficiency; three-phase transformer; auto transformer. Principles of energy conversion-d.c. generators

and motors : performance characteristics, starting and speed control, armature reaction and

commutation; three-phase induction motor: performance characteristics, starting and speed

control. Single-phase induction motor. Synchronous generators : performance characteristics,

regulation, parallel operation. Synchronous motors : starting characteristics, applications;

synchronous condensor. FHP motors, permanent magnet and stepper motors, brushless d.c.

motors, single-phase motors.

Power Systems :

Electric power generation : thermal, hydro, nuclear. Transmission line parameters : steady-

state performance of overhead transmission lines and cables. Distribution systems :

insulators, bundle conductors, corona and radio interference effects; per-unit quantities; bus

admittance and impedance matrices; load flow; voltage control and power factor correction.

Economic operation. Principles of overcurrent, differential and distance protection; solid state

relays, circuit breakers, concept of system stability. HVDC transmission.

Power Electronics and Electric Drives :

Semiconductor power devices : diode, transistor, thyristor, triac, GTO and MOSFET, static

characteristics, principles of operation; triggering circuits; phase controlled rectifiers; bridge

converters—fully controlled and half controlled; principles of thyristor chopper and inverter.

Basic concept of speed control of dc and ac motor drives.

Elements of IC Fabrication Technology :

Overview of IC Technology. Unit steps used in IC fabrication : wafer cleaning, photo-

lithography, wet and dry etching, oxidation, diffusion, ion-implantation, CVD and LPCVD

techniques for deposition of poly-silicon, silicon, silicon-pnitride and silicon dioxide;

metallisation and passivation.

[69]

MECHANICAL ENGINEERING CODE NO. (22)

Statics :

Simple application of equilibrium equations.

Dynamics :

Simple applications of equations of motion work, energy and power.

Theory of Machines :

Simple examples of kinematic chains and their inversions. Different types of gears, bearings, governors, flywheels and their functions.

Static and dynamic balancing of grid rotors.

Simple vibrations analysis of bars and shafts.

Linear automatic control systems.

Mechanics of Solids :

Stress, strain and Hooke’s Law. Shear and bending moments in beams. Simple bending and torsion of beams, springs and thin walled cylinders. Elementary concepts of elastic stability, mechanical properties and material testing.

Manufacturing Science :

Mechanics of metal cutting, tool life, economics of machining, cutting tool materials. Basic types of machine tool and their processes. Automatic machine tools, transfer lines. Metal forming processes and machines—shearing, drawing, spinning, rolling, forging, extrusion. Types of casting and welding methods. Powder metallurgy and processing of plastics.

Manufacturing Management :

Methods and time study, motion economy and work space design, operation and flow process charts. Cost estimation, break-even analysis. Location and layout of plants, material handling. Capital budgeting. Job shop and mass production, scheduling, despatching, Routing, Inventory.

Thermodynamics :

Basic concepts, definitions and laws, heat, work and temperature, Zeroth law, temperature scales, behaviour of pure substances, equations of state, first law and its corollaries, second law and its corollaries, analysis of air standard power cycles, carnot, otto, diesel, brayton cycles, vapour power cycles. Rankine reheat and regenerative cycles, Refrigeration cycles—Ben coleman. Vapour absorption and Vapour compression cycle analysis, open and closed cycle gas turbine with intercooling, reheating Energy Conversion.

Flow of steam through nozzles, critical pressure ratio, shock formation and its effect, Steam Generators, mountings and accessories. Impulse and reaction turbines, elements and layout of thermal power plants.

Hydraulic turbines and pumps, specific speed, layout of hydraulic power plants.

Introduction to nuclear reactors and power plants, handling of nuclear waste.

Refrigeration and Air Conditioning :

Refrigeration equipment and operation and maintenance, refrigerents, principles of air conditioning, psychrometric chart, comfort Zones, humidification and dehumidification.

Fluid Mechanics :

Hydrostatics, continuity equation. Bernoulli’s theorem, flow through pipes, discharge measurement, laminar and turbulent flow, boundary layer concept.

[70]

MEDICAL SCIENCE—CODE NO. (23)

Human Anatomy :

General principles and basic structural concept of Gross Anatomy of hipjoint, heart, stomach,

lungs, spleen, kidneys, uterus , ovary and adrenal glands.

Histological features of parotid gland, bronchi, testis, skin, bone and thyroid gland.

Gross anatomy of thalamus, internal capsule, cerebrum, including their blood supply;

functional localisation in cerebral cortex, cerebellum, spinal cord, eye, ear, throat, cranial

nerves.

Embryology of vertebral column, respiratory system and their congenital anomalies.

Human physiology and Biochemistry :

Neurophysiology: Sensory receptors, reticular formation, cerebellum and basal ganglia.

Reproduction : Regulation of functions of male and female gonads.

Cardiovascular system : Mechanical and electrical properties of heart including E.C.G. ;

regulation of cardiovascular functions.

G.I. System : Bilirubin metabolism, liver function tests.

Haematology : Haemoglobin synthesis, abnormal haemoglobins.

Respiration : Regulation of respiration, Digestion and absorption of fats, Metabolism of

carbohydrates.

Renal Physiology : Tubular function, regulation of pH.

Nucleic acids: R.N.A., D.N.A., genetic code and protein synthesis.

Pathology and Microbiology :

Principles of inflammation, Principles of carcinogenesis and tumour spread, Coronary heart

disease, Infective diseases of liver and gall bladder, Pathogenesis of tuberculosis, Immune

system, Immunological and serological tests for collagen vascular disease.

Histological diagnosis by fluroscent microscopy.

Etiology and laboratory diagnosis of diseases caused by Salmonella, Vibrio, Meningococcus

and hepatitis virus.

Life cycle and laboratory diagnosis of Entamoeba, histolytica, malarial parasite Ascaris.

Medicine :

Protein energy malnutrition.

Medical management of :

Coma, cerebro-vascular accidents, status asthamaticus, cardio pulmonary arrest, status

epilepticus, acute renal failure.

[71]

Clinical features, etiology and treatment of : Coronary heart disease, Rheumatic heart

disease, Pneumonia, Cirrhosis of liver, amoebic liver abscess, Peptic ulcer, Pyclonephritis,

Leprosy, Rheumatoid arthritis, Diabetes mellitus, Poliomyelitis, Meningitis, Schizophrenia.

Surgery :

Principles of surgical management of severely injured and process of fracture healing.

Malignant tumours of stomach and their surgical management.

Signs, symptoms, investigation and management of fractures of femur, Principles of pre-

operative and post-operative care.

Clinical manifestations, investigations and management of :— Hydrocephalus, Buerger’s

disease, Appendicitis, benign prostatic hypertrophy, spinabifida, brochogenic carcinoma,

carcinoma breast, carcinoma colon.

Clinical manifestations, investigations and surgical management of : Intestinal obstruction,

acute urinary retention, spinal injury, haemorrhagic shock, pneumothorax, pericardial

tamponade, haemetemesis.

Preventive and Social Medicine :

Principles of epidemiology, health care delivery.

Concept and general principles of prevention of disease and promotion of health.

National health programmes, effects of environmental pollution on health, concept of

balanced diet, family planning methods.

[72]

INSTRUCTIONS TO THE CANDIDATES & CODE LIST

There are two set of instructions for the candidates in the Information Brochure. The

candidates are required to read these instructions carefully. Non-compliance with any of these

instructions can result in the cancellation of the candidature of the candidates to the

examination. These instructions are:

1) General Instructions; and

2) Instructions for filing OMR application form

GENERAL INSTRUCTIONS

1) The application must be filled by the candidates in their own hand on the prescribed

form contained in the Information Brochure or supplied with it. Corrections, if any,

should be legible and attested by the candidates.

2) Before filling the application form, the candidates should read the eligibility conditions

carefully. They should apply only if they fulfil all the conditions to avoid disappointment

at a later stage.

3) The name of the candidate in the application form must be the same as in the

matriculation/secondary examination certificate.

4) The candidates should note that only the date of birth as recorded in the

matriculation/secondary examination certificate will be accepted by the Commission and

no subsequent request for its change will be considered or granted.

5) The candidates should take special care to ensure that all entries made in the

application form are clear and legible. The candidates will be solely responsible for any

adverse decision on their candidature due to illegible or misleading entries. Applications

which are illegible, incomplete, incorrect or are not accompanied by the prescribed fee

or certificates in the manner listed shall be summarily rejected.

6) Each candidate is required to paste (not pin or staple) on the ADMIT CARD a LATEST

PASSPORT SIZE PHOTOGRAPH ATTESTED BY A GAZETTED OFFICER and

signed by the candidate on the front side of the photograph. The candidates are

advised to keep THREE copies of this photograph with them for submission along with

the Main Competitive Examination application form. This is to ensure that all the

photographs submitted by them to the Commission at various stages of the examination

are identical. If, on verification at any stage, any variation is found in the photographs

submitted by them, their candidature is liable to be cancelled.

Note: The candidates must bring with them to the examination hall an extra attested copy of

the photograph identical to the one affixed on the ADMIT CARD.

7) While filling the application form, the candidates should carefully decide about their

choice of optional subjects. More than one application form from a candidate giving

different subject options will not be accepted. The Commission will accept only one

application at its discretion and the Commission's decision in the matter shall be final.

The candidates should note that no request for change of subject originally indicated by

them in the application form shall be entertained by the Commission under any

circumstances.

[73]

8) The application forms will be processed by a computerised system. The candidates are,

therefore, advised to read all instructions carefully and fill the application forms

indicating correctly the optional subject and reserve category code.

9) No change in the entries made in the original application form will be allowed under any

circumstances.

10) The candidates are advised in their own interest to ensure that their applications reach

the Commission's office on or before the closing date. Applications received in the

Commission's office after the closing date will not be considered and will be rejected

summarily.

11) The candidates should use only the international form of Indian numerals in the filling of

application forms and for writing the code, e.g. 1,2,3,4,5,6 etc. Only the Code Number

thus filled in will be taken into account.

12) Each candidate should send his application in a separate envelope.

13) THE INFORMATION BROCHURE HAS A PRINTED NUMBER ON THE FRONT

COVER. THIS IS YOUR BROCHURE NO., WHICH YOU MUST FILL ON THE OMR

APPLICATION FORM IN THE SPACE PROVIDED AND ALSO QUOTE IN ALL

CORRESPONDENCE WITH THE COMMISSION.

14) Please retain for your reference copies of all the completed application forms

submitted to the Commission.

15) The candidates should ensure that the signature appended by them in all the places,

viz., in their application forms, on the attendance sheet submitted by them in the

examination hall, in the Attendance List and in all correspondence with the Commission,

should be identical and there should be no variation of any kind. If any variation is found

in the signatures appended by them, their candidature is liable to be cancelled.

16) The candidates must write their papers in their own hand. In no circumstances will they

be allowed the help of a scribe to write the answers for them.

17) Travelling and other expenses shall be borne by the candidates themselves.

18) The Commission will not make any arrangements for the boarding and lodging of the

candidates.

19) The candidates who are unable to appear on the scheduled date of examination for any

reason shall not be entitled to re-examination under any circumstances.

20) The following shall amount to unfair means.

i) Obtaining support for his candidature by:

a) offering illegal gratification to, or

b) applying pressure to, or

c) blackmailing, or threatening to blackmail any person connected with the conduct

of the examination, or

ii) impersonating; or

iii) procuring impersonation by any person; or

[74]

iv) submitting fabricated document or documents which have been tampered with; or

v) making statements which are incorrect or false or suppressing material information;

or

vi) resorting to the following means in connection with his candidature for the

examination namely:

a) obtaining copy of question paper through improper means,

b) finding out the particulars of the persons connected with secret work relating to

the examination,

c) influencing the examiners or

vii) using unfair means during the examination; or

viii) writing obscene matter or drawing obscene sketches on the scripts, or

ix) misbehaving in the examination hall, including tearing of the scripts, provoking

fellow examinees to boycott the examination, creating a disorderly scene and the

like, or

x) harassing or doing bodily harm to the staff employed by the Commission for the

conduct of the examination; or

xi) violating any of the instructions issued to the candidates along with their ADMIT

CARD permitting them to take the examination; or

All or any of the acts specified in the foregoing clauses may, in addition to rendering

a candidate liable to criminal prosecution, also make him liable:-

a) to be disqualified by the Commission from the examination for which he is a

candidate; and/or

b) to be debarred either permanently or for a special period by the Commission

from any examination or selection held by it.

21) The following abbreviations have been used in the Information Brochure/application

forms:-

a) ESM: Ex-Servicemen

b) LDESM: Lineal Descendent of Ex-servicemen

c) SC: Scheduled Castes

d) SC ESM: Scheduled Castes Ex-servicemen

e) BC: Backward Classes

f) BC ESM: Backward Classes Ex-servicemen

g) SP (Pb.): Sports Person Punjab

h) SC SP (Pb.): Scheduled Castes Sports Person Punjab

[75]

CATEGORIES CODE LIST

CODE CATEGORY NAME

71 General Category

72 ESM Punjab Category

73 LDESM Punjab Category

74 Freedom Fighter Punjab

75 Sports Person Punjab

76 Physically Handicapped Punjab

77 S.C. Others Punjab

78 S.C. ESM Punjab

80 SC SP Punjab

81 Balmiki/Mazhbi Sikh Punjab

82 Balmiki/Mazhbi Sikh ESM Punjab

84 Balmiki/Mazhbi Sikh SP Punjab

85 BC Punjab

86 BC ESM Punjab

AGE RELAXATION CODE LIST

91 Punjab Government Servants, including courts

92 SC other states

93 Widows & certain other categories of women of Punjab

[76]

List of States

Sr. No. Name of State Code No.

1. Andhra Pradesh 101

2. Arunachal Pradesh 102

3. Assam 103

4. Bihar 104

5. Chhattisgarh 105

6. Goa 106

7. Gujarat 107

8. Haryana 108

9. Himachal Pradesh 109

10. Jammu & Kashmir 110

11. Jharkhand 111

12. Karnataka 112

13. Kerala 113

14. Madhya Pradesh 114

15. Maharashtra 115

16. Manipur 116

17. Meghalaya 117

18. Mizoram 118

19. Nagaland 119

20. Orissa 120

21. Punjab 121

22. Rajasthan 122

23. Sikkim 123

24. Tamil Nadu 124

25. Tripura 125

26. Uttar Pradesh 126

27. Uttarakhand 127

28. West Bengal 128

UNION TERRITORIES

29. Andaman and Nicobar Islands 129

30. Chandigarh 130

31. Delhi 131

32. Dadra and Nagar Haveli 132

33. Daman and Diu 133

34. Lakshadweep 134

35. Puducherry 135

[77]

INSTRUCTIONS FOR FILLING OMR APPLICATION FORM

For Preliminary Examination.

1. The application form is to be scanned by an Optical Marks Reader (OMR), a computer-

based equipment. Therefore, particular attention should be paid to the filling of data in

the application form.

2. The OMR application form is to be filled both in ink and in pencil as instructed. Several

columns like the name of the candidate, father's name, brochure number, optional

subjects code, date of birth, category code, number of chances availed and address

contain rectangular boxes as well as circles. In the rectangular boxes, the candidates

MUST write ONLY in ink. One letter should be entered into each box. The appropriate

circle below the rectangular box MUST be darkened ONLY with an HB pencil. DO NOT

DARKEN CIRCLE WITH INK UNDER ANY CIRCUMSTANCES. In case of a gap

between words, the relevant box should be left blank. The candidates should fill the

application form carefully because, when filling in ink, the ink mark cannot be erased.

Only the circles darkened with and an HB pencil can be corrected/changed by

completely erasing the wrongly filled circle. The erasure should be complete and without

any smudges as partially erased marks lead to wrong reading by the computer.

3. Completely darken the respective circle of your response as shown below. Darken the

circle fully, so that the letter/number inside the circle is not visible.

Wrong Method

Wrong Method

Wrong Method

Wrong Method

Correct Method

Wrong Method

A

A

A

A

A

A

D

D

D

D

D

D

B

B

B

B

B

B C

C

C

C

C

4. Do not scribble or make any stray marks on this form as this may invalidate your

application form.

5. The pre-folded OMR application form is supplied in a pre-addressed special

envelope and the candidate MUST submit the completed form in the same

envelope. The OMR application form is to be folded in the same manner as it is

supplied. No new fold should be made under any circumstances.

Nothing is to be pinned, stapled, pasted or tagged to the OMR application form. IN

CASE YOU HAVE TO ATTACH/STAPLE AN ACKNOWLEDGEMENT DUE (AD) SLIP

TO THE ENVELOPE, PLEASE DO SO IN THE SPACE PROVIDED ON THE

ENVELOPE. THIS IS IMPORTANT AS THE OMR APPLICATION FORM HAS TO BE

PROCESSED BY A COMPUTER SYSTEM.

The candidates are required to PLACE in the centre-fold of the OMR application

form ONLY the bank demand draft and the proof of claim certificate for

examination fee concession/exemption, where applicable. The bank draft and the

proof of claim certificate are NOT to be pinned, stapled, pasted or tagged to the

OMR application form. No other certificates or documents are to be submitted

with the OMR application form as such documents shall be verified only at the

time of the Main Competitive Examination.

[78]

6. The candidates are advised to keep a photocopy of the OMR application form and the

demand draft. However, such a photocopy shall not automatically entitle the candidate

to be admitted to the examination.

7. The candidates are advised to carefully go through the filled sample OMR application

form given in the brochure. Brief instructions for filling each column are given ahead.

Column No.1. The candidates are required to enter in the rectangular boxes their

name in ink in BLOCK CAPITAL LETTERS as given in the

Matriculation/Secondary Examination Certificate. In case a candidate's

name exceeds the number of boxes, he should ignore the rest of the

name. One space should be left blank between the first, middle and last

name. After writing the name in the rectangular boxes, darken the

appropriate circles below and complete this column as illustrated.

Column No.2. The candidates must fill their father's name in this column. Rest of the

instructions are the same as column No.1

Column No.3. The candidates are required to enter their six-digit Brochure number

which is given on the front cover of the Brochure.

Column No.4. The candidates must select an optional subject code from the list of

subject codes for the Preliminary Competitive Examination given in the

brochure and fill the code-one digit in each rectangle and darken the

appropriate circle – as illustrated on page 199-200.

Column No.5. Darken the appropriate circle if the candidates have passed the

graduation degree.

Column No.6. Darken the appropriate circle if the candidates are appearing in final

graduation examination.

Column No.7. Darken the appropriate circle if the candidates have passed Punjabi of

matric or equivalent standard.

Column No.8 Darken the appropriate circle if the candidates claim age relaxation

Column No.9 Category for Age relaxation

The candidates belonging to any of the six categories listed in this

column are entitled to age relaxation. Darken only appropriate circle

opposite the category applicable.

Column No.10 Sex

The candidates must darken the appropriate circle.

[79]

Column No.11 Examination fee

The candidates should check from the Brochure the amount of

examination fee to be paid by them. Darken the appropriate circle

accordingly.

Column No.12 Date of Birth

The candidates should fill the date of birth as per the

Matriculation/Secondary Examination Certificate. The candidates must

prefix zero for single-digit dates. For example, if a candidate's date of

birth is 15th May, 1985, he should write it as 15 May 85 and darken by

appropriate circle.

Column No.13. Category Code

The candidates must select a category code from the list given in the

Brochure and write it in the rectangular boxes—one digit in each

rectangle--and darken the appropriate circle.

Column No.14 Write with a ball point pen in clear legible CAPITAL LETTERS, the

name of the bank, name of the town/city in which it is situated, amount,

draft number and date.

Column No.15 Write with a black ball point pen in clear legible CAPITAL LETTERS, the

complete e-mail address.

Column No.16 Paste (DO NOT STAPLE) a recent coloured photograph of size 3.5cm

X 4.5 cm photograph with name plate. Do not attest the photograph.

Column No.17 Candidate should sign in the space provided for this purpose.

Column No.18 This column is self explanatory and is to be filled as per the illustration

in the sample form. Please mention only your correspondence

address.

Column No.19, 20 &

21

These columns are self explanatory and are to be filled as per the

illustration in the sample form.

Column No.22

This is a declaration which should be dated and signed by the candidate

in ball point pen in the space provided.

[80]

MAIN COMPETITIVE EXAMINATION

The compulsory and optional subjects and the maximum marks fixed for each subject for the

main competitive examination shall be as shown in the statement below :—

Paper Subject Maximum

Marks

I English 100

II Essay 100

Note.—The candidate may opt to write the Essay

either in English or Punjabi (in Gurmukhi Script)

III Punjabi (in Gurmukhi Script) 100

IV & V General Studies (Two papers of 100 marks each) 200

VI to IX Any two subjects to be selected from the list of 400

the optional subjects set out in para 16 below.

Each subject will have two papers.

Interview 100

_____________________________________________________________________

Total : 1000

2. The main Examination is intended to assess the overall intellectual traits and depth of

understanding of candidates rather than merely the range of their information and

memory. Total number of questions in the question papers of optional subjects will be

eight. All questions will carry equal marks. Each paper will be divided into two parts, viz.

Part A and Part B, each part containing four questions. Out of eight questions, five

questions are to be attempted. One question in each part will be compulsory. Candidates

will be required to answer three more questions out of remaining six questions, taking at

least one question from each Part. In this way, atleast two questions will be attempted

from each Part i.e. one compulsory question plus one more.

3. The scope of the syllabus for optional subject papers for the examination is broadly of the

honours degree level i.e. a level higher than the bachelor’s degree and lower than the

master’s degree. In the case of Engineering, Medical Science and Law, the level

corresponds to the bachelors degree.

4. The main competitive examination shall include compulsory and optional subjects and

every candidate shall take all the compulsory subjects and two of the optional subjects. A

candidate shall specify in his application form the optional subjects he desires to take.

5. The main examination will consist of written examination and an interview test. The written

examination will consist of 9 papers of conventional essay type in the subjects set out in

Regulation 1 above.

6. A candidate shall answer the question papers other than the language paper, in English

medium or in Punjabi medium.

7. No candidate shall be eligible to appear in the viva voce test unless he obtains 45 per

cent marks in the aggregate of all subject including at least 33 per cent marks in Punjabi

[81]

(in Gurmukhi Script) : provided that if at any main competitive examination a sufficient

number of candidates do not obtain 45 per cent marks in the aggregate, the Commission

may at their discretion lower this percentage to not below 40 per cent, percentage for the

language paper, i.e. Punjabi in Gurmukhi Script, remaining unchanged.

8. No candidate shall be considered to have qualified in the main competitive examination

unless he obtains at least 45 per cent marks in the aggregate in all subjects including viva

voce except in the case of any main competitive examination for which this percentage

has been lowered to not less than 40 per cent by the Commission under the proviso to

regulation 7 in which case the qualifying percentage shall be as determined by the

Commission.

9. If a candidate’s handwriting is not easily legible, a deduction which may be considerable

may be made on this account from the total marks otherwise accruing to him/her.

10. Credit will be given for orderly effective and exact expression combined with due economy

of words, in all subjects of the examination.

11. Names of qualified and unqualified candidates shall be arranged in order of merit

according to the aggregate marks obtained at the main competitive examination.

12. Ex-servicemen category candidates are required to appear only in the Compulsory

subjects, i.e., Paper I, II, III, IV & V. LDESM category candidates shall have to appear in

all the papers, including optional.

13. The candidates must list, in order of preference, in the space provided in the application

form for the Main Competitive Examination the service/post they wish to join.

Note.—In the event of tie order of merit shall be determined in accordance with highest

marks secured in viva voce.

14. The candidates securing the highest aggregate marks in the written part of the Main

Competitive Examination, numbering not more than three times the number of vacancies,

shall be called for the viva voce test.

15. Candidates shall specify in their application form the optional subjects they desire to take.

No change in the choice of options will be permitted under any circumstances.

16. The main examination shall include Compulsory and Optional Subjects as under :—

(A) List of Compulsory Subjects :

1. English

2. Essay

3. Punjabi (in Gurmukhi Script)

4. General Studies

(B) List of optional subjects for main examination : Code No.

1. Agriculture 31

2. Animal Husbandry and Veterinary Science 32

3. Anthropology 33

[82]

4. Botany 34

5. Chemistry 35

6. Civil Engineering 36

7. Commerce and Accountancy 37

8. Economics 38

9. Electrical Engineering 39

10. Geography 40

11. Geology 41

12. History 42

13. Law 43

14. Management 44

15. Mathematics 45

16. Mechanical Engineering 46

17. Medical Science 47

18. Philosophy 48

19. Physics 49

20. Political Science and International Relations 50

21. Psychology 51

22. Public Administration 52

23. Sociology 53

24. Statistics 54

25. Zoology 55

26. Literature of one of the following Languages :— 56

1. Hindi, 2. Punjabi, 3. Sanskrit, 4. Urdu, 5. English.

Note : (i) Candidates will not be allowed to offer the following combinations of subjects:

(a) Political Science and International Relations and Public Administration ;

(b) Commerce and Accountancy and Management ;

(c) Anthropology and Sociology ;

(d) Mathematics and Statistics ;

(e) Agriculture and Animal Husbandry and Veterinary Science ;

(f) Management and Public Administration :

(g) Of the Engineering subject viz., Civil Engineering, Electrical Engineering

and Mechanical Engineering—not more than one subject ;

(h) Animal Husbandry and Veterinary Science and Medical Science.

(ii) The question papers for the examination will be of conventional (essay) type.

[83]

(iii) Each paper will be of three hours duration. Blind candidates will, however, be

allowed an extra time of thirty minutes at each paper.

(iv) Candidates will have the option to answer all the question papers, except the

language papers viz., Papers I and II above in Punjabi or in English.

(v) Candidates exercising the option to answer Papers III to IX in Punjabi language,

may, if they so desire, give English version within brackets of only the

description of the technical terms, if any, in addition to the version in Punjabi

language.

(vi) The question papers other than language papers will be set both in Punjabi and

English.

(vii) The Compulsory papers on Punjabi Language and English will be of 10+2 or

equivalent standard.

(viii) For the Language papers, the script to be used by the candidates will be as

under :—

Language Script

Hindi Devanagari

Punjabi Gurmukhi

Sanskrit Devanagari

Urdu Persian

[84]

C. Interview Test :

The candidate will be interviewed by a Board who will have before them a record of his

career. He will be asked questions on matters of general interest. The object of the interview

is to assess the personal suitability of the candidate for a career in public service by a Board

of competent and unbiased observers. The test is intended to judge the mental calibre of a

candidate. In broad terms this is really an assessment of not only his intellectual qualities but

also social traits and his interest in current affairs. Some of the qualities to be judged are

mental alertness, critical powers of assimilation, clear and logical exposition, balance of

judgement, variety and depth of interest, ability for social cohesion and leadership, intellectual

and moral integrity.

2. The technique of the interview is not that of a strict cross-examination but of a natural,

though directed and purposive conversation which is intended to reveal the mental qualities of

the candidate.

3. The interview test is not intended to be a test either of the specialised or general

knowledge of the candidates which has been already tested through their written papers.

Candidates are expected to have taken an intelligent interest not only in their special subjects

of academic study but also in the events which are happening around them both within and

outside their own State or country as well as in modern currents of thought and in new

discoveries which should rouse the curiosity of well educated youth.

HOW TO APPLY

Those declared to have qualified the Preliminary Competitive Examination shall submit in their

own hand a fresh application form for admission to the Main Competitive Examination. The

application form for the Main Competitive Examination shall be issued to the candidates after

the declaration of result of the preliminary examination.

Certificates to be submitted and their order of placement as under:-

1. Date of birth certificate as specified

2. Degree Certificate

3. Proof of Punjabi pass of Matric or its equivalent standard

4. Detail Marks Card of graduation

5. Reserve Category Certificate issued by the competent authority in support of their claim

6. ESM/LDESM Pb. Certificate

7. Bank Draft

8. Three attested passport size photographs

Identical to the ones submitted for the Preliminary Competitive examination.

NOTE:- Those candidates called for the viva voce test shall be required to present the

original certificates before the Commission at the time of viva voce test.

[85]

EXAMINATION FEE

The candidates seeking admission to the Main Competitive Examination must pay an

examination fee of Rs.2000/- (Rupees Two Thousand only) to the Commission. The

candidates belonging to the Scheduled Castes of all States and Backward Classes of Punjab

are required to pay an examination fee of only Rs.500/- (Rupees Five hundred only) . The

candidates belonging to the Ex-servicemen of Punjab category are exempted from paying the

examination fee. LDESM category candidates, however, must pay the required examination

fee.

The examination fee must be submitted along with the completed application form through a

crossed Bank Demand Draft in original, drawn in favour of the Secretary, Punjab Public

Service Commission, and made payable at Patiala. The applications received without a Bank

Demand Draft or with inadequate examination fee shall be summarily rejected. The

examination fee is non-refundable. Candidates should write their name and address in

BLOCK LETTERS on the reverse of the Bank Demand Draft.

SUBMISSION OF APPLICATION FORM

Completed applications on the prescribed form for the Main Competitive Examination

must reach the Secretary, Punjab Public Service Commission, Baradari Gardens,

Patiala on or before the last date prescribed for the purpose along with the

examination fee. The candidates should note that the Commission will in no case be

responsible for non-receipt of their applications or any delay in receipt on any account

whatsoever. No application received later than the prescribed last date will be entertained

under any circumstances and all the late applications will be summarily rejected. Incomplete

application forms shall also be summarily rejected.

***

[86]

SYLLABUS FOR MAIN COMPETITIVE EXAMINATION

PAPER I - ENGLISH

SECTION-A

1. Comprehension (Unseen Passage)— 10 Marks

An unseen passage of 400-500 words

followed by 5 Questions to be answered

2. Precis Writing— 10 Marks

A passage of about 300 words to be

summarized to 1/3rd

3. Letter to Editor (on social problems e.g. child 10 Marks

labour, girl child, dowry, child marriage or on

environmental problem e.g. pollution etc—200

words)

4. Composition (Any general topic—300 words) 10 Marks

5. Translation of a Punjabi Paragraph (5 marks)/ 10 Marks

Sentences (5 marks) into English (10 sentences/

70 words)

SECTION-B

6. Correct the following sentences 5 Marks

7. Active and Passive Voice 5 Marks

8. Direct and Indirect Speech 5 Marks

9. Tenses 5 Marks

10. Join the sentences using Conjunctions 5 Marks

11. Fill in the blanks with Prepositions 5 Marks

12. Punctuate the Paragraph 10 Marks

13. Synonyms and Antonyms 5 Marks

14. Fill in the blanks with the correct form of verb 5 Marks

PAPER II - ESSAY

Candidates will be required to write an essay on a specific topic. The choice of subjects will

be given. They will be expected to keep closely to the subject of the essay to arrange their

ideas in orderly fashion, and to write concisely. Credit will be given for effective and exact

expression.

[87]

PAPER III - gzikphgzikphgzikphgzikph

GkrGkrGkrGkr————TTTT

e[Zb nze—100

1H nDfvZmk g?oQk (T[go'es g?o/Q B{z gVQ e/ 10 j/m fby/ gq;BK d/ T[so fdU)

2H ;zy/g ouBk (j/m fby/ g?oQ/ dk Y[ZetK f;ob/y 10 fdzd/ j'J/ fJZe fsjkJh ;apdK ftZu ;zy/g ouBk eo')

3H noih iK gZso (dcasoh iK xo/b{) 10 200 ;apdK ftZu

4H fe;/ fJZe ft;a/ s/ b/y fby' (400 ;apdK ftZu) 10

5H fdZs/ j'J/ g?o/Q (5 nze) iK tkeK (5 nze) dk 10 nzro/iah s/ gzikph ftZu nB[tkd eo'.

GkrGkrGkrGkr————nnnn

6H w[jkto/ ns/ nykD 10

7H fdZs/ j'J/ tkeK iK ;apdK B{z ;[ZX eo' 5

8H tke tNKdok (j/m fby/ tkeK B{z fdZshnK 5 j'JhnK jdkfJsK nB[;ko pdb')

9H tku pdb' (eosoh tku s'A eowDh tku) 5 (eowDh tku s'A eosoh tku)

10H ft;aokw fuzBQ brkU 5

11H nr/so 5

12H fgS/so 5

13H pj[nkoEe ;apd 10

[88]

PAPER IV & V - GENERAL STUDIES

General Guidelines

The nature and standard of questions in the General Studies paper will be such that a

well-educated person will be able to answer them without any specialised study. The

questions will be such as to test a candidate's general awareness of a variety of subjects,

which will have relevance for a career in Civil Services. The questions are likely to test the

candidate's basic understandings of all relevant issues, and ability to analyze and take a view

on conflicting socio- economic goals, objectives and demands. The candidates must give

relevant, meaningful and succinct answers.

PAPER-I

1. History of Modern Indian and Indian Culture :

The History of Modern India will cover history of the Country from about the middle of

nineteenth century and would also include questions on important personalities who

shaped the freedom movement and social reforms. The part relating to Indian culture will

cover all aspects of Indian culture from the ancient to modern times as well as principal

features of literature, arts and architecture.

2. Geography of India :

In this part, questions will be on the physical, economic and social geography of India.

3. Constitution of India and Indian Polity :

This part will include questions on the Constitution of India as well as all constitutional,

legal and administrative and other issues emerging from the politico- administrative

system prevalent in the country.

4. Current National Issues and Topics of Social Relevance :

This part is intended to test the candidate's awareness of current national issues and

topics of social relevance in present-day India, such as the following :

(i) The Indian economy and issues relating to planning, mobilization of resources,

growth, development and employment.

(ii) Issues arising from the social and economic exclusion of large sections from the

benefits of development.

(iii) Other issues related to development and management of human resource.

(iv) Health issues including the management of Public Health, Health Education and

ethical concerns regarding health care, medical research and pharmaceuticals.

(v) Law enforcement, internal security and related issues such as the preservation of

communal harmony.

(vi) Issues relating to good governance and accountability to the citizens including the

maintenance of human rights and of probility in public life.

(vii) Environmental issues, ecological preservation, conservation of natural resources

and national heritage.

5. Punjab Economy and People; its Social Economic and Cultural Institutions; and its

Language.

[89]

PAPER-II

1. India and the World :

This part will include questions to test candidate’s awareness of India's relationship with

the world in various spheres such as the following :—

Foreign Affairs with special emphasis on India's relations with neighbouring countries and

in the region.

Security and defence related matters.

Nuclear policy, issues and conflicts.

The Indian diaspora and its contribution to the India and the World.

2. India's Economic Interaction with the World :

In this part, questions will be economic and trade issues such as foreign trade, foreign

investment, economic and diplomacy issues relating to oil, gas and energy flows; the role

and functions of I.M.F. world Bank, W.T.O., WIPO etc., which influence India’s economic

interaction with other countries and international institutions.

3. Developments in the field of Science and Technology, IT and Space :

In this part, questions will test the candidate's awareness of the development in the field of

science and technology, information technology, space and basic ideas about computers,

robotics, nanotechnology, biotechnology and related issues regarding intectual property

rights.

4. International Affairs and institutions :

This part include questions on important events in the world affairs and on international

institutions.

5. Statistical analysis, graphs and diagrams :

This part will test the candidate's ability to draw conclusions from information presented in

statistical, graphical or diagrammatical from and to interpret them.

[90]

AGRICULTURE

PAPER - I

Ecology and its relevance to man, natural resources, their sustainable management and

conservation. Physical and social environment as factors of crop distribution and production.

Agro ecology; cropping pattern as indicators of environments. Environmental pollution and

associated hazards to crops, animals and humans. Climate change – International

conventions and global initiatives. Green house effect and global warming. Advance tools for

ecosystem analysis – Remote sensing (RS) and Geographic Information Systems (GIS).

Cropping patterns in different agro-climatic zones of the country. Impact of high-yielding and

short-duration varieties on shifts in cropping patterns. Concepts of various cropping and

farming systems. Organic and Precision farming. Package of practices for production of

important cereals, pulses, oil seeds, fibres, sugar, commercial and fodder crops.

Important features and scope of various types of forestry plantations such as social forestry,

agro-forestry, and natural forests. Propagation of forest plants. Forest products, Agro forestry

and value addition. Conservation of forest flora and fauna.

Weeds, their characteristics, dissemination and association with various crops; their

multiplications; cultural, biological, and chemical control of weeds.

Soil-physical, chemical and biological properties. Processes and factors of soil formation.

Soils of India. Mineral and organic constituents of soils and their role in maintaining soil

productivity. Essential plant nutrients and other beneficial elements in soils and plants.

Principles of soil fertility, soil testing and fertilizer recommendations, integrated nutrient

management.

Biofertilizers. Losses of nitrogen in soil, nitrogen-use efficiency in submerged rice soils,

nitrogen fixation in soils. Efficient phosphorus and potassium use. Problem soils and their

reclamation. Soil factors affecting greenhouse gas emission.

Soil conservation, integrated watershed management. Soil erosion and its management. Dry

land agriculture and its problems. Technology for stabilizing agriculture production in rain fed

areas.

Water-use efficiency in relation to crop production, criteria for scheduling irrigations, ways and

means of reducing run-off losses of irrigation water. Rainwater harvesting. Drip and sprinkler

irrigation. Drainage of waterlogged soils, quality of irrigation water, effect of industrial effluents

on soil and water pollution. Irrigation projects in India. Farm management, scope, importance

and characteristics, farm planning. Optimum resource use and budgeting. Economics of

different types of farming systems. Marketing management – strategies for development,

market intelligence. Price fluctuations and their cost; role of co-operatives in agricultural

economy; types and systems of farming and factors affecting them. Agricultural price policy.

Crop Insurance.

Agricultural extension, its importance and role, methods of evaluation of extension

programmes, socio-economic survey and status of big, small and marginal farmers and

landless agricultural labourers. Training programmes for extension workers. Role of Krishi

Vigyan Kendra’s (KVK) in dissemination of Agricultural technologies. Non Government

Organization (NGO) and self-help group approach for rural development.

[91]

PAPER - II

Cell structure, function and cell cycle. Synthesis, structure and function of genetic material.

Laws of heredity. Chromosome structure, chromosomal aberrations, linkage and cross-over

and their significance in recombination breeding. Polyploidy, euploids and aneuploids.

Mutations - and their role in crop improvement. Heritability, sterility and incompatibility,

classification and their application in crop improvement. Cytoplasmic inheritance, sex-linked,

sex-influenced and sex-limited characters.

History of plant breeding. Modes of reproduction, selfing and crossing techniques. Origin,

evolution and domestication of crop plants, center of origin, law of homologous series, crop

genetic resources—conservation and utilization. Application of principles of plant breeding,

improvement of crop plants. Molecular markers and their application in plant improvement.

Pure-line selection, pedigree, mass and recurrent selections, combining ability, its significance

in plant breeding. Heterosis and its exploitation. Somatic hybridization. Breeding for disease

and pest resistance. Role of interspecific and intergeneric hybridization. Role of genetic

engineering and biotechnology in crop improvement. Genetically modified crop plants.

Seed production and processing technologies. Seed certification, seed testing and storage.

DNA finger printing and seed registration. Role of public and private sectors in seed

production and marketing. Intellectual Property Rights (IPR) issues, WTO issues and its

impact on Agriculture.

Principles of Plant Physiology with reference to plant nutrition, absorption, translocation and

metabolism of nutrients. Soil-water-plant relationship.

Enzymes and plant pigments; photosynthesis—modern concepts and factors affecting the process, aerobic and anaerobic respiration; C

3, C

4 and CAM mechanisms. Carbohydrate,

protein and fat metabolism. Growth and development; photoperiodism and vernalilzation.

Plant growth substances and their role in crop production. Physiology of seed development

and germination; dormancy. Stress physiology—draught, salt and water stress.

Major fruits, plantation crops, vegetables, spices and flower crops. Package practices of

major horticultural crops. Protected cultivation and high tech horticulture. Post harvest

technology and value addition of fruits and vegetables. Landscaping and commercial

floriculture. Medicinal and aromatic plants. Role of fruits and vegetables in human nutrition.

Diagnosis of pests and diseases of field crops, vegetables, orchard and plantation crops and

their economic importance. Classification of pests and diseases and their management.

Integrated pest and disease management. Storage pests and their management. Biological

control of pests and diseases. Epidemiology and forecasting of major crop pests and

diseases. Plant quarantine measures. Pesticides, their formulation and modes of action.

Food production and consumption trends in India. Food security and growing population—

vision 2020. Reasons for grain surplus. National and international food policies. Production,

procurement, distribution constraints. Availability of food grains, per capita expenditure on

food. Trends in poverty, Public Distribution System and Below Poverty Line population,

Targeted Public Distribution System (PDS), policy implementation in context to globalization.

Processing constraints. Relation of food production to National Dietary Guidelines and food

consumption pattern. Food based dietary approaches to eliminate hunger. Nutrient deficiency

—Micro nutrient deficiency : Protein Energy Malnutrition or Protein Calorie Malnutrition (PEM

or PCM), Micro nutrient deficiency and HRD in context of work capacity of women and

children. Food grain productivity and food security.

[92]

ANIMAL HUSBANDRY AND VETERINARY SCIENCE

PAPER – I

1. Animal Nutrition:

1.1 Partitioning of food energy within the animal. Direct and indirect calorimetry. Carbon—nitrogen balance and comparative slaughter methods. Systems for expressing energy value of foods in ruminants, pigs and poultry. Energy requirements for maintenance, growth, pregnancy, lactation, egg, wool, and meat production.

1.2 Latest advances in protein nutrition. Energy protein interrelationships. Evaluation of protein quality. Use of NPN compounds in ruminant diets. Protein requirements for maintenance, growth, pregnancy, lactation, egg, wool and meat production.

1.3 Major and trace minerals—Their sources, physiological functions and deficiency symptoms. Toxic minerals. Mineral interactions. Role of fat-soluble and water—soluble vitamins in the body, their sources and deficiency symptoms.

1.4 Feed additives—methane inhibitors, probiotics, enzymes, antibiotics, hormones, oligosaccharides, antioxidants, emulsifiers, mould inhibitors, buffers etc. Use and abuse of growth promoters like hormones and antibiotics—latest concepts.

1.5 Conservation of fodders. Storage of feeds and feed ingredients. Recent advances in feed technology and feed processing. Anti–nutritional and toxic factors present in livestock feeds. Feed analysis and quality control. Digestibility trials—direct, indirect and indicator methods. Predicting feed intake in grazing animals.

1.6 Advances in ruminant nutrition. Nutrient requirements. Balanced rations. Feeding of calves, pregnant, work animals and breeding bulls. Strategies for feeding milch animals during different stages of lactation cycle. Effect of feeding on milk composition. Feeding of goats for meat and milk production. Feeding of sheep for meat and wool production.

1.7 Swine Nutrition. Nutrient requirements. Creep, starter, grower and finisher rations. Feeding of pigs for lean meat production. Low cost rations for swine.

1.8 Poultry nutrition. Special features of poultry nutrition. Nutrient requirements for meat and egg production. Formulation of rations for different classes of layers and broilers.

2. Animal Physiology:

2.1 Physiology of blood and its circulation, respiration, excretion. Endocrine glands in health and disease.

2.2 Blood constituents.—Properties and functions—blood cell formation-Haemoglobin synthesis and chemistry-plasma proteins production, classification and properties, coagulation of blood; Haemorrhagic disorders-anticoagulants-blood groups-Blood volume-Plasma expanders-Buffer systems in blood. Biochemical tests and their significance in disease diagnosis.

2.3 Circulation.—Physiology of heart, cardiac cycle, heart sounds, heart beat, electrocardiograms. Work and efficiency of heart-effect of ions on heart function-metabolism of cardiac muscle, nervous and chemical regulation of heart, effect of temperature and stress on heart, blood pressure and hypertension, osmotic regulation, arterial pulse, vasomotor regulation of circulation, shock. Coronary and pulmonary circulation, Blood-Brain barrier—Cerebrospinal fluid- circulation in birds.

2.4 Respiration.—Mechanism of respiration, Transport and exchange of gases –neural control of respiration-chemo-receptors-hypoxia-respiration in birds.

[93]

2.5 Excretion-Structure and function of kidney-formation of urine-methods of studying renal function-renal regulation of acid-base balance: physiological constituents of urine-renal failure-passive venous congestion-Urinary secretion in chicken-Sweat glands and their function. Bio-chemical test for urinary dysfunction.

2.6 Endocrine glands.—Functional disorders their symptoms and diagnosis. Synthesis of hormones, mechanism and control of secretion- hormonal receptors-classification and function.

2.7 Growth and Animal Production- Prenatal and postnatal growth, maturation, growth curves, measures of growth, factors affecting growth, conformation, body composition, meat quality.

2.8 Physiology of Milk Production.—Reproduction and Digestion—Current status of hormonal control of mammary development, milk secretion and milk ejection, Male and Female reproductive organs, their components and functions. Digestive organs and their functions.

2.9 Environmental Physiology.—Physiological relations and their regulation; mechanisms of adaptation, environmental factors and regulatory mechanisms involved in animal behaviour, climatology – various parameters and their importance. Animal ecology. Physiology of behaviour. Effect of stress on health and production.

3. Animal Reproduction:

Semen quality—Preservation and Artificial Insemination—Components of semen, composition of spermatozoa, chemical and physical properties of ejaculated semen, factors affecting semen in vivo and in vitro. Factors affecting semen production and quality, preservation, composition of diluents, sperm concentration, transport of diluted semen. Deep freezing techniques in cows, sheep, goats, swine and poultry. Detection of oestrus and time of insemination for better conception. Anoestrus and repeat breeding.

4. Livestock Production and Management:

4.1 Commercial Dairy Farming—Comparison of dairy farming in India with advanced countries. Dairying under mixed farming and as specialized farming, economic dairy farming. Starting of a dairy farm, capital and land requirement, organization of the dairy farm. Opportunities in dairy farming, factors determining the efficiency of dairy animal. Herd recording, budgeting, cost of milk production, pricing policy; Personnel Management. Developing Practical and Economic rations for dairy cattle; supply of greens throughout the year, feed and fodder requirements of Dairy Farm. Feeding regimes for young stock and bulls, heifers and breeding animals; new trends in feeding young and adult stock; Feeding records.

4.2 Commercial meat, egg and wool production—Development of practical and economic rations for sheep, goats, pigs, rabbits and poultry. Supply of greens, fodder, feeding regimes for young and mature stock. New trends in enhancing production and management. Capital and land requirements and socio-economic concept.

4.3 Feeding and management of animals under drought, flood and other natural calamities.

5. Genetics and Animal Breeding:

History of animal genetics. Mitosis and Meiosis: Mendelian inheritance; deviations to Mendelian genetics; Expression of genes; Linkage and crossing over; Sex determination, sex influenced and sex limited characters; Blood groups and polymorphism; Chromosome aberrations; Cytoplasmic inheritance. Gene and its structure; DNA as a genetic material; Genetic code and protein synthesis; Recombinant

[94]

DNA technology. Mutations, types of mutations, methods for detecting mutations and mutation rate. Trans-genesis.

5.1 Population Genetics applied to Animal Breeding—Quantitative Vs. qualitative traits; Hardy Weinberg Law; Population Vs. individual; Gene and genotypic frequency; Forces changing gene frequency; Random drift and small populations; Theory of path coefficient; Inbreeding, methods of estimating inbreeding coefficient, systems of inbreeding, effective population size; Breeding value, estimation of breeding value, dominance and epistatic deviation; Partitioning of variation; Genotype X environment correlation and genotype X environment interaction; role of multiple measurements; Resemblance between relatives.

5.2 Breeding Systems—Breeds of livestsock and Poultry. Heritability, repeatability and genetic and phenotypic correlations, their methods of estimation and precision of estimates; Aids to selection and their relative merits; Individual, pedigree, family and within family selection; Progeny testing; Methods of selection; Construction of selection indices and their uses; Comparative evaluation of genetic gains through various selection methods; Indirect selection and correlated response; Inbreeding, out breeding, upgrading, cross-breeding and synthesis of breeds; Crossing of inbred lines for commercial production; Selection for general and specific combining ability; Breeding for threshold characters. Sire index.

6. Extension:

Basic philosophy, objectives, concept and principles of extension. Different Methods adopted to educate farmers under rural conditions. Generation of technology, its transfer and feedback. Problems and constraints in transfer of technology. Animal husbandry programmes for rural development.

PAPER – II

1. Anatomy, Pharmacology and Hygiene:

1.1 Histology and Histological Techniques: Paraffin embedding technique of tissue processing and H.E. staining—Freezing microtomy— Microscopy—Bright field microscope and electron microscope. Cytology—structure of cell, organells and inclusions; cell division—cell types—Tissues and their classification—embryonic and adult tissues—Comparative histology of organs—Vascular. Nervous, digestive, respiratory, musculo—skeletal and urogenital systems—Endocrine glands —Integuments—sense organs.

1.2 Embryology—Embryology of vertebrates with special reference to aves and domestic mammals gametogenesis—fertilization—germ layers—foetal membranes and placentation—types of placenta in domestic mammals—Teratology—twins and twinning—organogenesis—germ layer derivatives—endodermal, mesodermal and ectodermal derivates.

1.3 Bovine Anatomy—Regional Anatomy: Paranasal sinuses of OX—surface anatomy of salivary glands. Regional anatomy of infraorbital, maxillary, mandibuloalveolar, mental and cornual nerve block. Regional anatomy of paravertebral nerves, pudendal nerve, median ulnar and radial nerves—tibial, fibular and digital nerves—Cranial nerves-structures involved in epidural anaesthesia—superficial lymph nodes—surface anatomy of visceral organs of thoracic, abdominal and pelvic cavities—comparative features of locomotor apparatus and their application in the biomechanics of mammalian body.

1.4 Anatomy of Fowl—Musculo—skeletal system—functional anatomy in relation to respiration and flying, digestion and egg production.

[95]

1.5 Pharmacology and therapeutic drugs—Cellular level of pharmacodynamics and pharmacokinetics. Drugs acting on fluids and electrolyte balance. Drugs acting on Autonomic nervous system. Modern concepts of anaesthesia and dissociative anaesthetics. Autacolds. Antimicrobials and principles of chemotherapy in microbial infections. Use of hormones in therapeutics—chemotherapy of parasitic infections. Drug and economic concerns in the Edible tissues of animals—chemotherapy of Neoplastic diseases. Toxicity due to insecticides, plants, metals, non-metals, zootoxins and mycotoxins.

1.6 Veterinary Hygiene with reference to water, air and habitation—Assessment of pollution of water, air and soil—Importance of climate in animal health—effect of environment on animal function and performance—relationship between industrialization and animal agriculture—animal housing requirements for specific categories of domestic animals viz. pregnant cows and sows, milking cows, broiler birds—stress, strain and productivity in relation to animal habitation.

2. Animal Diseases:

2.1 Etiology, epidemiology pathogenesis, symptoms, postmortem lesions, diagnosis, and control of infectious diseases of cattle, sheep and goat, horses, pigs and poultry.

2.2 Etiology, epidemiology, symptoms, diagnosis, treatment of production diseases of cattle, horse, pig and poultry.

2.3 Deficiency diseases of domestic animals and birds.

2.4 Diagnosis and treatment of non-specific conditions like impaction, Bloat, Diarrhoea, Indigestion, dehydration, stroke, poisoning.

2.5 Diagnosis and treatment of neurological disorders.

2.6 Principles and methods of immunization of animals against specific diseases—herd immunity—disease free zones—‘zero’ disease concept—chemoprophylaxis.

2.7 Anaesthesia—local, regional and general—preanesthetic medication. Symptoms and surgical interference in fractures and dislocation. Hernia, choking abomasal displacement—Caesarian operations. Rumenotomy—Castrations.

2.8 Disease investigation techniques.—Materials for laboratory investigation—Establishment of Animal Health Centers—Disease free zone.

3. Veterinary Public Health :

3.1 Zoonoses.—Classification, definition, role of animals and birds in prevalence and transmission of zoonotic diseases—occupational zoonotic diseases.

3.2 Epidemiology—Principle, definition of epidemiological terms, application of epidemiological measures in the study of diseases and disease control. Epidemiological features of air, water and food borne infections. OIE regulations, WTO, sanitary and phytosanitary measures.

3.3 Veterinary Jurisprudence—Rules and Regulations for improvement of animal quality and prevention of animal diseases—State and central rules for prevention of animal and animal product borne diseases—S P C A—Veterolegal cases—Certificates—Materials and Methods of collection of samples for veterolegal investigation.

[96]

4. Milk and Milk Products Technology :

4.1 Market Milk: Quality, testing and grading of raw milk. Processing, packaging, storing, distribution, marketing, defects and their control. Preparation of the following milks: Pasteurized, standardized, toned, double toned, sterilized, homogenized, reconstituted, recombined and flavoured milks. Preparation of cultured milks, cultures and their management, yoghurt, Dahi, Lassi and Srikhand. Preparation of flavoured and sterilized milks. Legal standards. Sanitation requirement for clean and safe milk and for the milk plant equipment.

4.2 Milk Products Technology.—Selection of raw materials, processing, storing, distributing and marketing milk products such as Cream, Butter, Ghee, Khoa, Channa, Cheese, condensed, evaporated, dried milk and baby food, Ice cream and Kulfi; by-products, whey products, butter milk, lactose and casein. Testing, grading, judging milk products—BIS and Agmark specifications, legal standards, quality control and nutritive properties. Packaging, processing and operational control. Costing of dairy products.

5. Meat Hygiene and Technology :

5.1 Meat Hygiene.

5.1.1 Ante mortem care and management of food animals, stunning, slaughter and dressing operations; abattoir requirements and designs; Meat inspection procedures and judgment of carcass meat cuts—grading of carcass meat cuts—duties and functions of Veterinarians in wholesome meat production.

5.1.2 Hygienic methods of handling production of meat—Spoilage of meat and control measures—Post—slaughter physicochemical changes in meat and factors that influence them—Quality improvement methods— Adulteration of meat and detection—Regulatory provisions in Meat Trade and Industry.

5.2 Meat Technology.

5.2.1 Physical and chemical characteristics of meat—Meat emulsions—Methods of preservation of meat—Curing, canning, irradiation, packaging of meat and meat products, processing and formulations.

5.3 By—products—Slaughter house by—products and their utilization—Edible and inedible by products—Social and economic implications of proper utilization of slaughter house by-products—Organ products for food and pharmaceuticals.

5.4 Poultry Products Technology—Chemical composition and nutritive value of poultry meat, pre—slaughter care and management. Slaughtering techniques, inspection, preservation of poultry meat and products. Legal and BIS standards.

Structure, composition and nutritive value of eggs. Microbial spoilage. Preservation and maintenance. Marketing of poultry meat, eggs and products. Value added meat products.

5.5 Rabbit/Fur Animal farming—Rabbit meat production. Disposal and utilization of fur and wool and recycling of waste by-products. Grading of wool.

[97]

ANTHROPOLOGY

PAPER - I

1.1 Meaning, scope and development of Anthropology.

1.2 Relationships with other disciplines : Social Sciences, Behavioural Sciences, Life

Sciences, Medical Sciences, Earth Sciences and Humanities.

1.3 Main branches of Anthropology, their scope and relevance :

(a) Social- cultural Anthropology.

(b) Biological Anthropology.

(c) Archaeological Anthropology.

(d) Linguistic Anthropology.

1.4 Human Evolution and emergence of Man :

(a) Biological and Cultural factors in human evolution.

(b) Theories of Organic Evolution (Pre-Darwinian, Darwinian and Post-Darwinian).

(c) Synthetic theory of evolution; Brief outline of terms and concepts of evolutionary

biology (Doll’s rule, Cope’s rule, Gause’s rule, parallelism, convergence, adaptive

radiation, and mosaic evolution).

1.5 Characteristics of Primates; Evolutionary Trend and Primate Taxonomy; Primate

Adaptations; (Arboreal and Terrestrial) Primate Taxonomy; Primate Behaviour; Tertiary

and Quaternary fossil primates; Living Major Primates; Comparative Anatomy of Man

and Apes; Skeletal changes due to erect posture and its implications.

1.6 Phylogenetic status, characteristics and geographical distribution of the following :

(a) Plio-pleistocene hominids in South and East Africa—Australopithecines.

(b) Homo erectus : Africa (Paranthropus), Europe (Homo erectus heidelbergensis),

Asia (Homo erectus javanicus, Homo erectus pekinensis).

(c) Neanderthal Man- La-Chapelle-aux-saints (Classical type), Mt. Carmel

(Progressive type).

(d) Rhodesian man.

(e) Homo sapiens — Cromagnon, Grimaldi and Chancelede.

1.7 The biological basis of life : The Cell, DNA structure and replication, Protein Synthesis,

Gene, Mutation, Chromosomes, and Cell Division.

1.8 (a) Principles of Prehistoric Archaeology. Chronology : Relative and Absolute Dating

methods.

(b) Cultural Evolution—Broad Outlines of Prehistoric cultures:

(i) Paleolithic

(ii) Mesolithic

(iii) Neolithic

[98]

(iv) Chalcolithic

(v) Copper-Bronze Age

(vi) Iron Age

2.1 The Nature of Culture : The concept and characteristics of culture and civilization;

Ethnocentrism vis-à-vis cultural Relativism.

2.2 The Nature of Society: Concept of Society; Society and Culture; Social Institutions;

Social groups; and Social stratification.

2.3 Marriage : Definition and universality; Laws of marriage (endogamy, exogamy,

hypergamy, hypogamy, incest taboo); Types of marriage (monogamy, polygamy,

polyandry, group marriage). Functions of marriage; Marriage regulations (preferential,

prescriptive and proscriptive); Marriage payments (bride wealth and dowry).

2.4 Family : Definition and universality; Family, household and domestic groups; functions

of family; Types of family (from the perspectives of structure, blood relation, marriage,

residence and succession); Impact of urbanization, industrialization and feminist

movements on family.

2.5 Kinship : Consanguinity and Affinity; Principles and types of descent (Unilineal, Double,

Bilateral, Ambilineal); Forms of descent groups (lineage, clan, phratry, moiety and

kindred); Kinship terminology (descriptive and classificatory); Descent, Filiation and

Complimentary Filiation; Descent and Alliance.

3. Economic organization : Meaning, scope and relevance of economic anthropology;

Formalist and Substantivist debate; Principles governing production, distribution and

exchange (reciprocity, redistribution and market), in communities, subsisting on hunting

and gathering, fishing, swiddening, pastoralism, horticulture, and agriculture;

globalization and indigenous economic systems.

4. Political organization and Social Control : Band, tribe, chiefdom, kingdom and state;

concepts of power, authority and legitimacy; social control, law and justice in simple

societies.

5. Religion: Anthropological approaches to the study of religion (evolutionary,

psychological and functional); monotheism and polytheism; sacred and profane; myths

and rituals; forms of religion in tribal and peasant societies (animism, animatism,

fetishism, naturism and totemism); religion, magic and science distinguished; magico-

religious functionaries (priest, shaman, medicine man, sorcerer and witch).

6. Anthropological theories :

(a) Classical evolutionism (Tylor, Morgan and Frazer)

(b) Historical particularism (Boas); Diffusionism (British, German and American)

(c) Functionalism (Malinowski); Structural-functionlism (Radcliffe-Brown)

(d) Structuralism (L’evi - Strauss and E. Leach)

(e) Culture and personality (Benedict, Mead, Linton, Kardiner and Cora - du Bois).

(f) Neo - evolutionism (Childe, White, Steward, Sahlins and Service)

[99]

(g) Cultural materialism (Harris)

(h) Symbolic and interpretive theories (Turner, Schneider and Geertz)

(i) Cognitive theories (Tyler, Conklin)

(j) Post- modernism in anthropology

7. Culture, language and communication : Nature, origin and characteristics of language;

verbal and non-verbal communication; social context of language use.

8. Research methods in anthropology :

(a) Fieldwork tradition in anthropology

(b) Distinction between technique, method and methodology

(c) Tools of data collection : observation, interview, schedules, questionnaire, Case

study, genealogy, life-history, oral history, secondary sources of information,

participatory methods.

(d) Analysis, interpretation and presentation of data.

9.1 Human Genetics – Methods and Application : Methods for study of genetic principles in

man-family study (pedigree analysis, twin study, foster child, co-twin method, cytogenetic

method, chromosomal and karyo-type analysis), biochemical methods, immunological

methods, D.N.A. technology and recombinant technologies.

9.2 Mendelian genetics in man-family study, single factor, multifactor, lethal, sub-lethal and

polygenic inheritance in man.

9.3 Concept of genetic polymorphism and selection, Mendelian population, Hardy-Weinberg

law; causes and changes which bring down frequency–mutation, isolation, migration,

selection, inbreeding and genetic drift. Consanguineous and non-consanguineous

mating, genetic load, genetic effect of consanguineous and cousin marriages.

9.4 Chromosomes and chromosomal aberrations in man, methodology.

(a) Numerical and structural aberrations (disorders).

(b) Sex chromosomal aberrations – Klinefelter (XXY), Turner (XO), Super female

(XXX), intersex and other syndromic disorders.

(c) Autosomal aberrations – Down syndrome, Patau, Edward and Cri-du-chat

syndromes.

(d) Genetic imprints in human disease, genetic screening, genetic counseling, human

DNA profiling, gene mapping and genome study.

9.5 Race and racism, biological basis of morphological variation of non-metric and metric

characters. Racial criteria, racial traits in relation to heredity and environment; biological

basis of racial classification, racial differentiation and race crossing in man.

9.6 Age, sex and population variation as genetic marker—ABO, Rh blood groups, HLA Hp,

transferring, Gm, blood enzymes. Physiological characteristics-Hb level, body fat, pulse

rate, respiratory functions and sensory perceptions in different cultural and socio-

economic groups.

[100]

9.7 Concepts and methods of Ecological Anthropology. Bio-cultural Adaptations—Genetic

and Non- genetic factors. Man’s physiological responses to environmental stresses: hot

desert, cold, high altitude climate.

9.8 Epidemiological Anthropology : Health and disease. Infectious and non-infectious

diseases. Nutritional deficiency related diseases.

10. Concept of human growth and development : stages of growth—pre-natal, natal, infant,

childhood, adolescence, maturity, senescence.

—Factors affecting growth and development genetic, environmental, biochemical,

nutritional, cultural and socio-economic.

—Ageing and senescence. Theories and observations—biological and chronological

longevity. Human physique and somatotypes. Methodologies for growth studies.

11.1 Relevance of menarche, menopause and other bioevents to fertility. Fertility

patterns and differentials.

11.2 Demographic theories—biological, social and cultural.

11.3 Biological and socio-ecological factors influencing fecundity, fertility, natality and

mortality.

12. Applications of Anthropology: Anthropology of sports, Nutritional anthropology,

Anthropology in designing of defence and other equipments, Forensic Anthropology,

Methods and principles of personal identification and reconstruction, Applied human

genetics – Paternity diagnosis, genetic counseling and eugenics, DNA technology in

diseases and medicine, serogenetics and cytogenetics in reproductive biology.

PAPER – II

1.1 Evolution of the Indian Culture and Civilization — Prehistoric (Palaeolithic, Mesolithic,

Neolithic and Neolithic-Chalcolithic). Protohistoric (Indus Civilization) : Pre-Harappan,

Harappan and post-Harappan cultures. Contributions of tribal cultures to Indian

civilization.

1.2 Palaeo – anthropological evidences from India with special reference to Siwaliks and

Narmada basin (Ramapithecus, Sivapithecus and Narmada Man).

1.3 Ethno-archaeology in India : The concept of ethno-archaeology; Survivals and Parallels

among the hunting, foraging, fishing, pastoral and peasant communities including arts

and crafts producing communities.

2. Demographic profile of India — Ethnic and linguistic elements in the Indian population

and their distribution. Indian population—factors influencing its structure and growth.

3.1 The structure and nature of traditional Indian social system — Varnashram,

Purushartha, Karma, Rina and Rebirth.

3.2 Caste system in India—structure and characteristics, Varna and caste, Theories of

origin of caste system, Dominant caste, Caste mobility, Future of caste system, Jajmani

system, Tribe—caste continuum.

3.3 Sacred Complex and Nature-Man—Spirit Complex.

[101]

3.4 Impact of Buddhism, Jainism, Islam and Christianity on Indian society.

4. Emergence and growth of anthropology in India—Contributions of the 18th, 19th and

early 20th Century scholar-administrators. Contributions of Indian anthropologists

to tribal and caste studies.

5.1 Indian Village :—Significance of village study in India; Indian village as a social system;

Traditional and changing patterns of settlement and inter-caste relations; Agrarian

relations in Indian villages; Impact of globalization on Indian villages.

5.2 Linguistic and religious minorities and their social, political and economic status.

5.3 Indigenous and exogenous processes of socio-cultural change in Indian society :—

Sanskritization, Westernization, Modernization; Inter-play of little and great traditions;

Panchayati raj and social change; Media and social change.

6.1 Tribal situation in India—Bio-genetic variability, linguistic and socio-economic

characteristics of tribal populations and their distribution.

6.2 Problems of the tribal Communities—land alienation, poverty, indebtedness, low

literacy, poor educational facilities, unemployment, underemployment, health and

nutrition.

6.3 Developmental projects and their impact on tribal displacement and problems of

rehabilitation. Development of forest policy and tribals. Impact of urbanization and

industrialization on tribal populations.

7.1 Problems of exploitation and deprivation of Scheduled Castes, Scheduled Tribes and

Other Backward Classes. Constitutional safeguards for Scheduled Tribes and

Scheduled Castes.

7.2 Social change and contemporary tribal societies—Impact of modern democratic

institutions, development programmes and welfare measures on tribals and weaker

sections.

7.3 The concept of ethnicity; Ethnic conflicts and political developments; Unrest among

tribal communities; Regionalism and demand for autonomy; Pseudo-tribalism; Social

change among the tribes during colonial and post-Independent India.

8.1 Impact of Hinduism, Buddhism, Christianity, Islam and other religions on tribal societies.

8.2 Tribe and nation state — a comparative study of tribal communities in India and other

countries.

9.1 History of administration of tribal areas, tribal policies, plans, programmes of tribal

development and their implementation. The concept of PTGs (Primitive Tribal Groups),

their distribution, special programmes for their development. Role of N.G.Os in tribal

development.

9.2 Role of anthropology in tribal and rural development.

9.3 Contributions of anthropology to the understanding of regionalism, communalism, and

ethnic and political movements.

[102]

BOTANY

PAPER – I

1. Microbiology and Plant Pathology:

Structure and reproduction/multiplication of viruses, viroids, bacteria, fungi and

mycoplasma; Applications of microbiology in agriculture, industry, medicine and in control

of soil and water pollution; Prion and Prion hypothesis.

Important crop diseases caused by viruses, bacteria, mycoplasma, fungi and nematodes;

Modes of infection and dissemination; Molecular basis of infection and disease

resistance/defence; Physiology of parasitism and control measures; Fungal toxins;

Modelling and disease forecasting; Plant quarantine.

2. Cryptogams:

Algae, fungi, lichens, bryophytes, pteridophytes—structure and reproduction from

evolutionary viewpoint; Distribution of Cryptogams in India and their ecological and

economic importance.

3. Phanerogams:

Gymnosperms:—Concept of Progymnosperms ; Classification and distribution of

gymnosperms; Salient features of Cycadales, Ginkgoales, Coniferales and Gnetales, their

structure and reproduction; General account of Cycadofilicales, Bennettitales and

Cordaitales; Geological time scale; Type of fossils and their study techniques.

Angiosperms: Systematics, anatomy, embryology, palynology and phylogeny.

Taxonomic hierarchy; International Code of Botanical Nomenclature; Numerical taxonomy

and chemotaxonomy; Evidence from anatomy, embryology and palynology.

Origin and evolution of angiosperms; Comparative account of various systems of

classification of angiosperms; Study of angiospermic families—Mangnoliaceae,

Ranunculaceae, Brassicaceae, Rosaceae, Fabaceae, Euphorbiaceae, Malvaceae,

Dipterocarpaceae, Apiaceae, Asclepiadaceae, Verbenaceae, Solanaceae, Rubiaceae,

Cucurbitaceae, Asteraceae, Poaceae, Arecaceae, Liliaceae, Musaceae and

Orchidaceae.

Stomata and their types; Glandular and non-glandular trichomes; Unusual secondary growth; Anatomy of C

3 and C

4 plants; Xylem and phloem differentiation; Wood anatomy.

Development of male and female gametophytes, pollination, fertilization; Endosperm—its

development and function; Patterns of embryo development; Polyembroyony and

apomixes; Applications of palynology; Experimental embryology including pollen storage

and test-tube fertilization.

4. Plant Resource Development:

Domestication and introduction of plants; Origin of cultivated plants; Vavilov’s centres of

origin; Plants as sources for food, fodder, fibre, spices, beverages, edible oils, drugs,

narcotics, insecticides, timber, gums, resins and dyes, latex, cellulose, starch and its

products; Perfumery; Importance of Ethnobotany in Indian context; Energy plantations;

Botanical Gardens and Herbaria.

[103]

5. Morphogenesis:

Totipotency, polarity, symmetry and dfferentiation; Cell, tissue, organ and protoplast

culture; Somatic hybrids and Cybrids; Micropropagation; Somaclonal variation and its

applications; Pollen haploids, embryo rescue methods and their applications.

PAPER – II

1. Cell Biology:

Techniques of cell biology; Prokaryotic and eukaryotic cells—structural and ultrastructural

details; Structure and function of extracellular matrix (cell wall), membranes-cell adhesion,

membrane transport and vesicular transport; Structure and function of cell organelles

(chloroplasts, mitochondria, ER, dictyosomes ribosomes, endosomes, lysosomes,

peroxisomes); Cytoskelaton and microtubules; Nucleus, nucleolus, nuclear pore complex;

Chromatin and nucleosome; Cell signalling and cell receptors; Signal transduction; Mitosis

and meiosis; Molecular basis of cell cycle; Numerical and structural variations in

chromosomes and their significance; Chromatin organization and packaging of genome;

Polytene chromosomes; B-chromosomes—structure, behaviour and significance.

2. Genetics, Molecular Biology and Evolution:

Development of genetics; Gene versus allele concepts (Pseudoalleles); Quantitative

genetics and multiple factors; Incomplete dominance, polygenic inheritance, multiple

alleles; Linkage and crossing over; Methods of gene mapping, including molecular maps

(idea of mapping function); Sex chromosomes and sex-linked inheritance, sex

determination and molecular basis of sex differentiation; Mutations (biochemical and

molecular basis); Cytoplasmic inheritance and cytoplasmic genes (including genetics of

male sterility).

Structure and synthesis of nucleic acids and proteins; Genetic code and regulation of

gene expression; Gene silencing; Multigene families; Organic evolution—evidences,

mechanism and theories. Role of RNA in origin and evolution.

3. Plant Breeding, Biotechnology and Biostatistics:

Methods of plant breeding – introduction, selection and hybridization (pedigree,

backcross, mass selection, bulk method); Mutation, polyploidy, male sterility and heterosis

breeding; Use of apomixes in plant breeding; DNA sequencing; Genetic engineering—

methods of transfer of genes; Transgenic crops and biosafety aspects; Development and

use of molecular markers in plant breeding; Tools and techniques—probe, southern

blotting, DNA fingerprinting, PCR and FISH.

Standard deviation and co-efficient of variation (CV); Tests of significance (Z-test, t-test

and chi-square test); Probability and distributions (normal, binomial and Poisson);

Correlation and regression.

4. Physiology and Biochemistry:

Water relations, mineral nutrition and ion transport, mineral deficiencies; Photosynthesis – photochemical reactions; photophosphorylation and carbon fixation pathways; C

3, C

4 and

CAM pathways; Mechanism of phloem transport; Respiration (anerobic and aerobic,

including fermentation) – electron transport chain and oxidative phosphorylation;

Photorespiration; Chemiosmotic theory and ATP synthesis; Lipid metabolism; Nitrogen

fixation and nitrogen metabolism; Enzymes, coenzymes; Energy transfer and energy

[104]

conservation; Importance of secondary metabolites; Pigments as photoreceptors

(plastidial pigments and phytochrome); Plant movements; Photoperiodism and flowering,

vernalization, senescence; Growth substances—their chemical nature, role and

applications in agri-horticulture; Growth indices, growth movements; Stress physiology

(heat, water, salinity, metal); Fruit and seed physiology; Dormancy, storage and

germination of seed; Fruit ripening – its molecular basis and manipulation.

5. Ecology and Plant Geography:

Concept of ecosystem; Ecological factors; Concepts and dynamics of community; Plant

succession; Concept of biosphere; Ecosystems; Conservation; Pollution and its control

(including phytoremediation); Plant indicators; Environment (Protection) Act.

Forest types of India—Ecological and economic importance of forests, afforestation,

deforestation and social forestry; Endangered plants, endemism, IUCN categories, Red

Data Books; Biodiversity and its conservation; Protected Area Network; Convention on

Biological Diversity; Farmers’ Rights and Intellectual Property Rights; Concept of

Sustainable Development; Biogeochemical cycles; Global warming and climatic change;

Invasive species; Environmental Impact Assessment; Phytogeographical regions of India.

[105]

CHEMISTRY

PAPER - I

1. Atomic Structure:

Heisenberg’s uncertainty principle, Schrodinger wave equation (time independent);

Interpretation of wave function, particle in one-dimensional box, quantum numbers,

hydrogen atom wave functions; Shapes of s, p and d orbitals.

2. Chemical Bonding:

Ionic bond, characteristics of ionic compounds, lattice energy, Born-Haber cycle; covalent

bond and its general characteristics, polarities of bonds in molecules and their dipole

moments; Valence bond theory, concept of resonance and resonance energy; Molecular orbital theory (LCAO method); bonding in H

2+, H

2 , He

2+ to Ne

2, NO, CO, HF, and CN-;

Comparison of valence bond and molecular orbital theories, bond order, bond strength

and bond length.

3. Solid State:

Crystal systems; Designation of crystal faces, lattice structures and unit cell; Bragg’s law; X-ray diffraction by crystals; Close packing, radius ratio rules, calculation of some limiting radius ratio values; Structures of NaCl, ZnS, CsCl and CaF

2; Stoichiometric and

nonstoichiometric defects, impurity defects, semi-conductors.

4. The Gaseous State and Transport Phenomenon:

Equation of state for real gases, inter-molecular interactions and critical phenomena and liquefaction of gases, Maxwell’s distribution of speeds, intermolecular collisions, collisions on the wall and effusion; Thermal conductivity and viscosity of ideal gases.

5. Liquid State:

Kelvin equation; Surface tension and surface energy, wetting and contact angle, interfacial tension and capillary action.

6. Thermodynamics:

Work, heat and internal energy; first law of thermodynamics.

Second law of thermodynamics; entropy as a state function, entropy changes in various processes, entropy–reversibility and irreversibility, Free energy functions; Thermodynamic equation of state; Maxwell relations; Temperature, volume and pressure dependence of

U, H, A, G, Cp and C

v, α and β J-T effect and inversion temperature; criteria for equilibrium,

relation between equilibrium constant and thermodynamic quantities; Nernst heat theorem, introductory idea of third law of thermodynamics.

7. Phase Equilibria and Solutions:

Clausius-Clapeyron equation; phase diagram for a pure substance; phase equilibria in binary systems, partially miscible liquids–upper and lower critical solution temperatures; partial molar quantities, their significance and determination; excess thermodynamic functions and their determination.

8. Electrochemistry:

Debye-Huckel theory of strong electrolytes and Debye-Huckel limiting Law for various equilibrium and transport properties.

Galvanic cells, concentration cells; electrochemical series, measurement of e.m.f. of cells and its applications fuel cells and batteries.

[106]

Processes at electrodes; double layer at the interface; rate of charge transfer, current

density; overpotential; electroanalytical techniques: Polarography, amperometry, ion

selective electrodes and their uses.

9. Chemical Kinetics:

Differential and integral rate equations for zeroth, first, second and fractional order

reactions; Rate equations involving reverse, parallel, consecutive and chain reactions;

branching chain and explosions; effect of temperature and pressure on rate constant;

Study of fast reactions by stop-flow and relaxation methods; Collisions and transition state

theories.

10. Photochemistry:

Absorption of light; decay of excited state by different routes; photochemical reactions

between hydrogen and halogens and their quantum yields.

11. Surface Phenomena and Catalysis:

Absorption from gases and solutions on solid adsorbents, Langmuir and B.E.T. adsorption

isotherms; determination of surface area, characteristics and mechanism of reaction on

heterogeneous catalysts.

12. Bio-inorganic Chemistry:

Metal ions in biological systems and their role in ion transport across the membranes

(molecular mechanism), oxygen-uptake proteins, cytochromes and ferredoxins.

13. Coordination Compounds:

(i) Bonding theories of metal complexes; Valence bond theory, crystal field theory and

its modifications; applications of theories in the explanation of magnetism and

electronic spectra of metal complexes.

(ii) Isomerism in coordination compounds; IUPAC nomenclature of coordination

compounds; stereochemistry of complexes with 4 and 6 coordination numbers;

chelate effect and polynuclear complexes; trans effect and its theories; kinetics of

substitution reactions in square-planer complexes; thermodynamic and kinetic

stability of complexes.

(iii) EAN rule, Synthesis structure and reactivity of metal carbonyls; carboxylate anions,

carbonyl hydrides and metal nitrosyl compounds.

(iv) Complexes with aromatic systems, synthesis, structure and bonding in metal olefin

complexes, alkyne complexes and cyclopentadienyl complexes; coordinative

unsaturation, oxidative addition reactions, insertion reactions, fluxional molecules

and their characterization; Compounds with metal-metal bonds and metal atom

clusters.

14. Main Group Chemistry:

Boranes, borazines, phosphazenes and cyclic phosphazene, silicates and silicones,

Interhalogen compounds; Sulphur – nitrogen compounds, noble gas compounds.

15. General Chemistry of ‘f’ Block Elements:

Lanthanides and actinides; separation, oxidation states, magnetic and spectral properties;

lanthanide contraction.

[107]

PAPER - II

1. Delocalised Covalent Bonding:

Aromaticity, anti-aromaticity; annulenes, azulenes, tropolones, fulvenes, sydnones.

2. (i) Reaction Mechanisms.—General methods (both kinetic and non-kinetic) of study

of mechanism of organic reactions: isotopic method, cross-over experiment,

intermediate trapping, stereochemistry; energy of activation; thermodynamic control

and kinetic control of reactions.

(ii) Reactive Intermediates.—Generation, geometry, stability and reactions of

carbonium ions and carbanions, free radicals, carbenes, benzynes and nitrenes.

(iii) Substitution Reactions.—SN1, S

N2 and S

Ni mechanisms; neighbouring group

participation; electrophilic and nucleophilic reactions of aromatic compounds

including heterocyclic compounds–pyrrole, furan, thiophene and indole.

(iv) limination Reactions: E1, E2 and Elcb mechanisms; orientation in E2 reactions—

Saytzeff and Hoffmann; pyrolytic syn elimination – Chugaev and Cope eliminations.

(v) Addition Reactions.—Electrophilic addition to C=C and C C; nucleophilic addition

to C=0, C N, conjugated olefins and carbonyls.

(vi) Reactions and Rearrangements.—(a) Pinacol-pinacolone, Hoffmann, Beckmann,

Baeyer–Villiger, Favorskii, Fries, Claisen, Cope, Stevens and Wagner-Meerwein

rearrangements.

(b) Aldol condensation, Claisen condensation, Dieckmann, Perkin, Knoevenagel,

Witting, Clemmensen, Wolff-Kishner, Cannizzaro and von Richter reactions; Stobbe,

benzoin and acyloin condensations; Fischer indole synthesis, Skraup synthesis,

Bischler-Napieralski, Sandmeyer, Reimer-Tiemann and Reformatsky reactions.

3. Pericyclic Reactions:

Classification and examples; Woodward—Hoffmann rules—electrocyclic reactions,

cycloaddition reactions [2+2 and 4+2] and sigmatropic shifts [1, 3; 3, 3 and 1, 5] FMO

approach.

4. (i) Preparation and Properties of Polymers.—Organic polymers–polyethy-lene,

polystyrene, polyvinyl chloride, teflon, nylon, terylene, synthetic and natural rubber.

(ii) Biopolymers.—Structure of proteins, DNA and RNA.

5. Synthetic Uses of Reagents:

OsO4, HIO

4, CrO

3, Pb(OAc)

4, SeO

2, NBS, B

2H

6, Na-Liquid NH

3, LIAIH

4, NaBH

4, n-BuLi and

MCPBA.

6. Photochemistry:

Photochemical reactions of simple organic compounds, excited and ground states, singlet

and triplet states, Norrish-Type I and Type II reactions.

[108]

7. Spectroscopy:

Principle and applications in structure elucidation:

(i) Rotational.—Diatomic molecules; isotopic substitution and rotational constants.

(ii) Vibrational.—Diatomic molecules, linear triatomic molecules, specific frequencies

of functional groups in polyatomic molecules.

(iii) Electronic.—Singlet and triplet states; ν→π* and π π*→ transitions; application to

conjugated double bonds and conjugated carbonyls–Woodward-Fieser rules;

Charge transfer spectra.

(iv) Nuclear Magnetic Resonance (1H NMR).—Basic principle; chemical shift and spin-

spin interaction and coupling constants.

(v) Mass Spectrometry.—Parent peak, base peak, metastable peak, McLafferty

rearrangement.

[109]

CIVIL ENGINEERING

PAPER – I

1. Engineering Mechanics, Strength of Materials and Structural Analysis:

1.1 Engineering Mechanics:

Units and Dimensions, SI Units, Vectors, Concept of Force, Concept of particle and rigid

body. Concurrent, Non Concurrent and parallel forces in a plane, moment of force, free

body diagram, conditions of equillibrium, Principle of virtual work, equivalent force

system.

First and Second Moment of area, Mass moment of Inertia.

Static Friction.

Kinematics and Kinetics:

Kinematics in Cartesian Co-ordinates, motion under uniform and nonuniform

acceleration, motion under gravity. Kinetics of particle: Momentum and Energy

principles, collision of elastic bodies, rotation of rigid bodies.

1.2 Strength of Materials:

Simple Stress and Strain, Elastic constants, axially loaded compression members,

Shear force and bending moment, theory of simple bending, Shear Stress distribution

across cross sections, Beams of uniform strength.

Deflection of beams: Macaulay’s method, Mohr’s Moment area method, Conjugate

beam method, unit load method. Torsion of Shafts, Elastic stability of columns, Euler’s

Rankine’s and Secant formulae.

1.3 Structural Analysis:

Castiglianio’s theorems I and II, unit load method of consistent deformation applied to

beams and pin jointed trusses. Slope-deflection, moment distribution,

Rolling loads and Influences lines : Influences lines for Shear Force and Bending

moment at a section of beam. Criteria for maximum shear force and bending Moment in

beams traversed by a system of moving loads. Influences lines for simply supported

plane pin jointed trusses.

Arches : Three hinged, two hinged and fixed arches, rib shortening and temperature

effects.

Matrix methods of analysis : Force method and displacement method of analysis of

indeterminate beams and rigid frames.

Plastic Analysis of beams and frames : Theory of plastic bending, plastic analysis,

statical method, Mechanism method.

Unsymmetrical bending : Moment of inertia, product of inertia, position of Neutral Axis

and Principle axes, calculation of bending stresses.

[110]

2. Design of Structures: Steel, Concrete and Masonry Structures:

2.1 Structural Steel Design:

Structural Steel : Factors of safety and load factors. Riveted, bolted and welded joints

and connections. Design of tension and compression member, beams of built up

section, riveted and welded plate girders, gantry girders, stancheons with battens and

lacings.

2.2 Design of Concrete and Masonry Structures:

Concept of mix design. Reinforced Concrete : Working Stress and Limit State

method of design–Recommendations of I.S. codes Design of one way and two way

slabs, stair-case slabs, simple and continuous beams of rectangular, T and L sections.

Compression members under direct load with or without eccentricity, Cantilever and

Counter fort type retaining walls.

Water tanks : Design requirements for Rectangular and circular tanks resting on

ground.

Prestressed concrete : Methods and systems of prestressing, anchorages, Analysis

and design of sections for flexure based on working stress, loss of prestress.

Design of brick masonry as per I.S. Codes

3. Fluid Mechanics, Open Channel Flow and Hydraulic Machines:

3.1 Fluid Mechanics:

Fluid properties and their role in fluid motion, fluid statics including forces acting on

plane and curved surfaces.

Kinematics and Dynamics of Fluid flow : Velocity and accelerations, stream lines,

equation of continuity, irrotational and rotational flow, velocity potential and stream

functions.

Continuity, momentum and energy equation, Navier-Stokes equation, Euler’s equation

of motion, application to fluid flow problems, pipe flow, sluice gates, weirs.

3.2 Dimensional Analysis and Similitude:

Buckingham’s Pi-theorem, dimensionless parameters.

3.3 Laminar Flow:

Laminar flow between parallel, stationary and moving plates, flow through tube.

3.4 Boundary layer:

Laminar and turbulent boundary layer on a flat plate, laminar sub layer, smooth and

rough boundaries, drag and lift.

Turbulent flow through pipes : Characteristics of turbulent flow, velocity distribution

and variation of pipe friction factor, hydraulic grade line and total energy line.

[111]

3.5 Open channel flow:

Uniform and non-uniform flows, momentum and energy correction factors, specific

energy and specific force, critical depth, rapidly varied flow, hydraulic jump, gradually

varied flow, classification of surface profiles, control section, step method of integration

of varied flow equation.

3.6 Hydraulic Machines and Hydropower:

Hydraulic turbines, types classification, Choice of turbines, performance parameters,

controls, characteristics, specific speed.

Principles of hydropower development.

4. Geotechnical Engineering:

Soil Type and structure – gradation and particle size distribution – consistency limits.

Water in soil – capillary and structural – effective stress and pore water pressure –

permeability concept – field and laboratory determination of permeability – Seepage

pressure – quick sand conditions – Shear strength determination – Mohr Coulomb

concept.

Compaction of soil – Laboratory and field tests.

Compressibility and consolidation concept – consolidation theory – consolidation

settlement analysis.

Earth pressure theory and analysis for retaining walls, Application for sheet piles and

Braced excavation.

Bearing capacity of soil – approaches for analysis – Field tests – settlement analysis –

stability of slope of earth walk.

Subsurface exploration of soils – methods

Foundation – Type and selection criteria for foundation of structures – Design criteria for

foundation – Analysis of distribution of stress for footings and pile – pile group action-

pile load test.

Ground improvement techniques.

PAPER - II

1. Construction Technology, Equipment, Planning and Management:

1.1 Construction Technology:

Engineering Materials :

Physical properties of construction materials with respect to their use in construction—

Stones, Bricks and Tiles; Lime, Cement, different types of Mortars and Concrete.

Specific use of ferro cement, fibre reinforced C.C, High strength concrete.

[112]

Timber, properties and defects—common preservation treatments.

Use and selection of materials for specific use like Low Cost Housing, Mass Housing,

High Rise Buildings.

1.2 Construction:

Masonry principles using Brick, stone, Blocks – construction detailing and strength

characteristics.

Types of plastering, pointing, flooring, roofing and construction features.

Common repairs in buildings.

Principles of functional planning of building for residents and specific use—Building

code provisions.

Basic principles of detailed and approximate estimating—specification writing and rate

analysis – principles of valuation of real property.

Machinery for earthwork, concreting and their specific uses – Factors affecting selection

of equipments – operating cost of Equipments.

1.3 Construction Planning and Management:

Construction activity – schedules- organization for construction industry – Quality

assurance principles.

Use of Basic principles of network – analysis in form of CPM and PERT – their use in

construction monitoring, Cost optimization and resource allocation.

Basic principles of Economic analysis and methods.

Project profitability – Basic principles of Boot approach to financial planning – simple toll

fixation criterions.

2. Surveying and Transportation Engineering

2.1 Surveying:

Common methods and instruments for distance and angle measurement for CE work –

their use in plane table, traverse survey, leveling work, triangulation, contouring and

topographical map.

Basic principles of photogrammetry and remote sensing.

2.2 Railway Engineering:

Permanent way – components, types and their functions – Functions and Design

constituents of turn and crossings – Necessity of geometric design of track – Design of

station and yards.

2.3 Highway Engineering:

Principles of Highway alignments – classification and geometrical design elements and

standards for Roads.

[113]

Pavement structure for flexible and rigid pavements—Design principles and

methodology of pavements.

Typical construction methods and standards of materials for stabilized soil, WBM,

Bituminous works and CC roads.

Surface and sub-surface drainage arrangements for roads—culvert structures.

Pavement distresses and strengthening by overlays.

Traffic surveys and their applications in traffic planning—Typical design features for

channelized, intersection, rotary etc.–signal designs – standard Traffic signs and

markings.

3. Hydrology, Water Resources and Engineering:

3.1 Hydrology:

Hydrological cycle, precipitation, evaporation, transpiration, infiltration, overland flow,

hydrograph, flood frequency analysis, flood routing through a reservoir, channel flow

routing-Muskingam method.

3.2 Ground water flow:

Specific yield, storage coefficient, coefficient of permeability, confined and unconfined

equifers, aquifers, aquitards, radial flow into a well under confined and unconfined

conditions.

3.3 Water Resources Engineering:

Ground and surface water resource, single and multipurpose projects, storage capacity

of reservoirs, reservoir losses, reservoir sedimentation.

3.4 Irrigation Engineering:

(i) Water requirements of crops: consumptive use, duty and delta, irrigation methods

and their efficiencies.

(ii) Canals: Distribution systems for canal irrigation, canal capacity, canal losses,

alignment of main and distributory canals, most efficient section, lined canals, their

design, regime theory, critical shear stress, bed load.

(iii) Water logging: causes and control, salinity.

(iv) Canal structures: Design of, head regulators, canal falls, aqueducts, metering

flumes and canal outlets.

(v) Diversion headwork: Principles and design of weirs of permeable and

impermeable foundation, Khosla’s theory, energy dissipation.

(vi) Storage works: Types of dams, design, principles of rigid gravity, stability analysis.

(vii) Spillways: Spillway types, energy dissipation.

(viii) River training: Objectives of river training, methods of river training.

[114]

4. Environmental Engineering:

4.1 Water Supply:

Predicting demand for water, impurities of water and their significance, physical,

chemical and bacteriological analysis, waterborne diseases, standards for potable

water.

4.2 Intake of water:

Water treatment: principles of coagulation, flocculation and sedimentation; slow-; rapid-,

pressure-, filters; chlorination, softening, removal of taste, odour and salinity.

4.3 Sewerage systems:

Domestic and industrial wastes, storm sewage–separate and combined systems, flow

through sewers, design of sewers.

4.4 Sewage characterization:

BOD, COD, solids, dissolved oxygen, nitrogen and TOC. Standards of disposal in

normal watercourse and on land.

4.5 Sewage treatment:

Working principles, units, chambers, sedimentation tanks, trickling filters, oxidation

ponds, activated sludge process, septic tank, disposal of sludge, recycling of

wastewater.

4.6 Solid waste:

Collection and disposal in rural and urban contexts, management of long-term ill effects.

5. Environmental pollution:

Sustainable development. Radioactive wastes and disposal. Environmental impact

assessment for thermal power plants, mines, river valley projects. Air pollution. Pollution

control acts.

[115]

COMMERCE & ACCOUNTANCY

PAPER - I

Accounting and Finance

Accounting, Taxation & Auditing

1. Financial Accounting:

Accounting as a Financial Information System; Impact of Behavioural Sciences.

Accounting Standards e.g., Accounting for Depreciation, Inventories, Research and

Development Costs, Long-term Construction Contracts, Revenue Recognition, Fixed

Assets, Contingencies, Foreign Exchange Transactions, Investments and

Government Grants, Cash Flow Statement, Earnings Per Share.

Accounting for Share Capital Transactions including Bonus Shares, Right Shares,

Employees Stock Option and Buy- Back of Securities.

Preparation and Presentation of Company Final Accounts.

Amalgamation, Absorption and Reconstruction of Companies.

2. Cost Accounting:

Nature and Functions of Cost Accounting. Installation of Cost Accounting System.

Cost Concepts related to Income Measurement, Profit Planning, Cost Control and

Decision Making.

Methods of Costing: Job Costing, Process Costing, Activity Based Costing.

Volume – cost – Profit Relationship as a tool of Profit Planning.

Incremental Analysis/ Differential Costing as a Tool of Pricing Decisions, Product

Decisions, Make or Buy Decisions, Shut-Down Decisions etc.

Techniques of Cost Control and Cost Reduction: Budgeting as a Tool of Planning and

Control. Standard Costing and Variance Analysis.

Responsibility Accounting and Divisional Performance Measurement.

3. Taxation :

Income Tax: Definitions; Basis of Charge; Incomes which do not form Part of Total

Income. Simple problems of Computation of Income (of Individuals only) under

Various Heads, i.e., Salaries, Income from House Property, Profits and Gains from

Business or Profession, Capital Gains, Income from other sources, Income of other

Persons included in Assessee’s Total Income .

Set - Off and Carry Forward of Loss.

Deductions from Gross Total Income.

Salient Features/Provisions Related to VAT and Services Tax.

[116]

4. Auditing :

Company Audit: Audit related to Divisible Profits, Dividends, Special investigations,

Tax audit.

Audit of Banking, Insurance, Non-Profit Organizations and Charitable

Societies/Trusts/Organizations.

Financial Management, Financial Institutions and Markets

1. Financial Management:

Finance Function: Nature, Scope and Objectives of Financial Management: Risk and

Return Relationship.

Tools of Financial Analysis: Ratio Analysis, Funds-Flow and Cash-Flow Statement.

Capital Budgeting Decisions: Process, Procedures and Appraisal Methods. Risk and

Uncertainty Analysis and Methods.

Cost of capital: Concept, Computation of Specific Costs and Weighted Average Cost

of Capital. CAPM as a Tool of Determining Cost of Equity Capital.

Financing Decisions: Theories of Capital Structure—Net Income (NI) Approach, Net

Operating Income (NOI) Approach, MM Approach and Traditional Approach.

Designing of Capital structure: Types of Leverages (Operating, Financial and

Combined), EBIT- EPS Analysis, and other Factors.

Dividend Decisions and Valuation of Firm: Walter’s Model, MM Thesis, Gordan’s

Model Lintner’s Model. Factors Affecting Dividend Policy.

Working Capital Management: Planning of Working Capital. Determinants of Working

Capital, Components of Working Capital—Cash, Inventory and Receivables.

Corporate Restructuring with focus on Mergers and Acquisitions (Financial aspects

only)

2. Financial Markets and Institutions:

Indian Financial System: An Overview Money Markets: Participants, Structure and

Instruments. Commercial Banks. Reforms in Banking sector. Monetary and Credit

Policy of RBI. RBI as a Regulator.

Capital Market: Primary and Secondary Market. Financial Market Instruments and

Innovative Debt Instruments; SEBI as a Regulator.

Financial Services: Mutual Funds, Venture Capital, Credit Rating Agencies, Insurance

and IRDA.

[117]

PAPER – II

Organisation Theory and Behaviour,

Human Resource Management and

Industrial Relations

Organisation Theory and Behaviour

1. Organisation Theory:

Nature and Concept of Organisation; External Environment of Organizations—

Technological, Social, Political, Economical and Legal; Organizational Goals—Primary

and Secondary goals, Single and Multiple Goals; Management by Objectives.

Evolution of Organisation Theory: Classical, Neo-classical and Systems Approach.

Modern Concepts of Organisation Theory: Organisational Design, Organisational

Structure and Organisational Culture.

Organisational Design–Basic Challenges; Differentiation and Integration Process;

Centralization and Decentralization Process; Standardization / Formalization and

Mutual Adjustment. Coordinating Formal and Informal Organizations. Mechanistic

and Organic Structures.

Designing Organizational structures–Authority and Control; Line and Staff Functions,

Specialization and Coordination. Types of Organization Structure –Functional. Matrix

Structure, Project Structure. Nature and Basis of Power , Sources of Power, Power

Structure and Politics. Impact of Information Technology on Organizational Design

and Structure.

Managing Organizational Culture.

2. Organisation Behaviour:

Meaning and Concept; Individual in organizations: Personality, Theories, and

Determinants; Perception—Meaning and Process.

Motivation: Concepts, Theories and Applications. Leadership—Theories and Styles.

Quality of Work Life (QWL): Meaning and its impact on Performance, Ways of its

Enhancement. Quality Circles (QC) – Meaning and their Importance. Management of

Conflicts in Organizations. Transactional Analysis, Organizational Effectiveness,

Management of Change.

Human Resources Management and Industrial Relations

1. Human Resources Management (HRM):

Meaning, Nature and Scope of HRM, Human Resource Planning, Job Analysis, Job

Description, Job Specification, Recruitment Process, Selection Process, Orientation

and Placement, Training and Development Process, Performance Appraisal and 360°

Feed Back, Salary and Wage Administration, Job Evaluation, Employee Welfare,

Promotions, Transfers and Separations.

2. Industrial Relations (IR):

Meaning, Nature, Importance and Scope of IR, Formation of Trade Unions, Trade

Union Legislation, Trade Union Movement in India. Recognition of Trade Unions,

[118]

Problems of Trade Unions in India. Impact of Liberalization on Trade Union

Movement.

Nature of Industrial Disputes : Strikes and Lockouts , Causes of Disputes, Prevention

and Settlement of Disputes.

Worker’s Participation in Management: Philosophy, Rationale, Present Day Status

and Future Prospects.

Adjudication and Collective Bargaining.

Industrial Relations in Public Enterprises, Absenteeism and Labour Turnover in Indian

Industries and their Causes and Remedies.

ILO and its Functions.

[119]

ECONOMICS

PAPER – I

1. Advanced Micro Economics:

(a) Marshallian and Walrasiam Approaches to Price determination.

(b) Alternative Distribution Theories: Ricardo, Kaldor, Kaleeki.

(c) Markets Structure: Monopolistic Competition, Duopoly, Oligopoly.

(d) Modern Welfare Criteria: Pareto Hicks & Scitovsky, Arrow’s Impossibility

Theorem, A.K. Sen’s Social Welfare Function.

2. Advanced Macro Economics:

Approaches to Employment Income and Interest Rate determination Classical,

Keynes (IS-LM) curve, Neo classical synthesis and New classical, Theories of Interest

Rate determination and Interest Rate Structure.

3. Money - Banking and Finance:

(a) Demand for and Supply of Money: Money Multiplier Quantity Theory of Money

(Fisher, Pique and Friedman) and Keyne’s Theory on Demand for Money, Goals

and Instruments of Monetary Management in Closed and Open Economies.

Relation between the Central Bank and the Treasury. Proposal for ceiling on

growth rate of money.

(b) Public Finance and its Role in Market Economy : In stabilization of supply,

allocation of resources and in distribution and development. Sources of Govt.

revenue, forms of Taxes and Subsidies, their incidence and effects. Limits to

taxation, loans, crowding-out effects and limits to borrowings. Public

Expenditure and its effects.

4. International Economics:

(a) Old and New Theories of International Trade

(i) Comparative Advantage.

(ii) Terms of Trade and Offer Curve.

(iii) Product Cycle and Strategic Trade Theories.

(iv) Trade as an engine of growth and theories of under development in an

open economy.

(b) Forms of Protection : Tariff and quota.

(c) Balance of Payments Adjustments : Alternative Approaches.

(i) Price versus income, income adjustments under fixed exchange rates.

(ii) Theories of Policy Mix.

(iii) Exchange rate adjustments under capital mobility.

(iv) Floating Rates and their Implications for Developing Countries : Currency

Boards.

(v) Trade Policy and Developing Countries.

[120]

(vi) BOP, adjustments and Policy Coordination in open economy macro-

model.

(vii) Speculative attacks.

(viii) Trade Blocks and Monetary Unions.

(ix) WTO : TRIMS, TRIPS, Domestic Measures, Different Rounds of WTO

talks.

5. Growth and Development:

(a) (i) Theories of growth: Harrod’s model.

(ii) Lewis model of development with surplus labour.

(iii) Balanced and Unbalanced growth.

(iv) Human Capital and Economic Growth.

(v) Research and Development and Economic Growth.

(b) Process of Economic Development of Less developed countries: Myrdal and

Kuzments on economic development and structural change: Role of Agriculture

in Economic Development of less developed countries.

(c) Economic development and International Trade and Investment, Role of

Multinationals.

(d) Planning and Economic Development: changing role of Markets and Planning,

Private-Public Partnership.

(e) Welfare indicators and measures of growth – Human Development Indices. The

basic needs approach.

(f) Development and Environmental Sustainability – Renewable and Non-

Renewable Resources, Environmental Degradation, Intergenerational equity

development.

PAPER – II

1. Indian Economy in Pre-Independence Era:

Land System and its changes, Commercialization of agriculture, Drain theory, Laissez

faire theory and critique. Manufacture and Transport: Jute, Cotton, Railways, Money

and Credit.

2. Indian Economy after Independence:

A. The Pre Liberalization Era :

(i) Contribution of Vakil, Gadgil and V.K.R.V. Rao.

(ii) Agriculture : Land Reforms and land tenure system, Green Revolution and

capital formation in agriculture.

(iii) Industry Trends in composition and growth, Role of public and private sector,

Small scale and cottage industries.

(iv) National and Per capita income : patterns, trends, aggregate and Sectoral

composition and changes their in.

[121]

(v) Broad factors determining National Income and distribution, Measures of

poverty, Trends in poverty and inequality.

B. The Post Liberalization Era :

(i) New Economic Reform and Agriculture : Agriculture and WTO, Food

processing, Subsidies, Agricultural prices and public distribution system,

Impact of public expenditure on agricultural growth.

(ii) New Economic Policy and Industry : Strategy of industrialization, Privatization,

Disinvestments, Role of foreign direct investment and multinationals.

(iii) New Economic Policy and Trade : Intellectual property rights : Implications of

TRIPS, TRIMS, GATS and new EXIM policy.

(iv) New Exchange Rate Regime : Partial and full convertibility, Capital account

convertibility.

(v) New Economic Policy and Public Finance : Fiscal Responsibility Act, Twelfth

Finance Commission and Fiscal Federalism and Fiscal Consolidation.

(vi) New Economic Policy and Monetary system. Role of RBI under the new

regime.

(vii) Planning : From central Planning to indicative planning, Relation between planning and markets for growth and decentralized planning : 73rd and 74th Constitutional amendments.

(viii) New Economic Policy and Employment : Employment and poverty, Rural wages, Employment Generation, Poverty alleviation schemes, New Rural, Employment Guarantee Scheme.

[122]

ELECTRICAL ENGINEERING

PAPER - I

1. Circuit Theory:

Circuit components; network graphs; KCL, KVL; circuit analysis methods : nodal analysis, mesh analysis; basic network theorems and applications; transient analysis : RL, RC and RLC circuits; sinusoidal steady state analysis; resonant circuits; coupled circuits; balanced 3-phase circuits; Two-port networks.

2. Signals & Systems:

Representation of continuous-time and discrete-time signals & systems; LTI systems; convolution ; impulse response; time-domain analysis of LTI systems based on convolution and differential/difference equations. Fourier transform, Laplace transform, Z-transform, Transfer function. Sampling and recovery of signals DFT, FFT Processing of analog signals through discrete-time systems.

3. E.M. Theory:

Maxwell’s equations, wave propagation in bounded media. Boundary conditions, reflection and refraction of plane waves. Transmission line: travelling and standing waves, impedance matching, Smith chart.

4. Analog Electronics:

Characteristics and equivalent circuits (large and small-signal) of Diode, BJT, JFET and MOSFET. Diode circuits : clipping, clamping, rectifier. Biasing and bias stability. FET amplifiers. Current mirror; Amplifiers: single and multi-stage, differential, operational, feedback and power. Analysis of amplifiers; frequency-response of amplifiers. OPAMP circuits. Filters; sinusoidal oscillators : criterion for oscillation; single-transistor and OPAMP configurations. Function generators and wave-shaping circuits. Linear and switching power supplies.

5. Digital Electronics:

Boolean algebra; minimization of Boolean functions; logic gates; digital IC families

(DTL, TTL, ECL, MOS, CMOS). Combinational circuits : arithmetic circuits, code

converters, multiplexers and decoders. Sequential circuits : latches and flip-flops,

counters and shift-registers. Comparators, timers, multivibrators. Sample and hold

circuits, ADCs and DACs. Semiconductor memories. Logic implementation using

programmable devices (ROM, PLA, FPGA).

6. Energy Conversion:

Principles of electromechanical energy conversion : Torque and emf in rotating

machines. DC machines : characteristics and performance analysis; starting and

speed control of motors; Transformers : principles of operation and analysis;

regulation, efficiency; 3-phase transformers. 3-phase induction machines and

synchronous machines : characteristics and performance analysis; speed control.

7. Power Electronics and Electric Drives:

Semiconductor power devices : diode, transistor, thyristor, triac, GTO and MOSFET–static characteristics and principles of operation; triggering circuits; phase control rectifiers; bridge converters : fully-controlled and half-controlled; principles of thyristor

[123]

choppers and inverters; DC-DC converters; Switch mode inverter; basic concepts of speed control of DC and AC motor drives applications of variable-speed drives.

8. Analog Communication:

Random variables : continuous, discrete; probability, probability functions. Statistical averages; probability models; Random signals and noise : white noise, noise equivalent bandwidth; signal transmission with noise; signal to noise ratio. Linear CW modulation : Amplitude modulation : DSB, DSB-SC and SSB. Modulators and Demodulators; Phase and Frequency modulation : PM & FM signals; narrowband FM; generation & detection of FM and PM, Deemphasis, Preemphasis. CW modulation system : Superhetrodyne receivers, AM receivers, communication receivers, FM receivers, phase locked loop, SSB receiver Signal to noise ratio calculation for AM and FM receivers.

PAPER - II

1. Control Systems :

Elements of control systems; block-diagram representation; open-loop & closed-loop systems; principles and applications of feed-back. Control system components. LTI systems : time-domain and transform-domain analysis. Stability : Routh Hurwitz criterion, root-loci, Bode-plots and polar plots, Nyquist’s criterion; Design of lead-lad compensators. Proportional, PI, PID controllers. State-variable representation and analysis of control systems.

2. Microprocessors and Microcomputers :

PC organisation; CPU, instruction set, register set, timing diagram, programming, interrupts, memory interfacing, I/O interfacing, programmable peripheral devices.

3. Measurement and Instrumentation :

Error analysis; measurement of current, voltage, power, energy, power-factor, resistance, inductance, capacitance and frequency; bridge measurement. Signal conditioning circuit; Electronic measuring instruments : multimeter, CRO, digital voltmeter, frequency counter, Q-meter, spectrum-analyzer, distortion-meter. Transducers : thermocouple, thermistor, LVDT, strain-gauge, piezo-electric crystal.

4. Power Systems: Analysis and Control :

Steady-state performance of overhead transmission lines and cables; principles of active and reactive power transfer and distribution; per-unit quantities; bus admittance and impedance matrices; load flow; voltage control and power factor correction; economic operation; symmetrical components, analysis of symmetrical and unsymmetrical faults. Concept of system stability: swing curves and equal area criterion. Static VAR system. Basic concepts of HVDC transmission.

5. Power System Protection :

Principles of overcurrent, differential and distance protection. Concept of solid state relays. Circuit breakers. Computer aided protection : Introduction; line bus, generator, transformer protection; numeric relays and application of DSP to protection.

6. Digital Communication :

Pulse code modulation (PCM), differential pulse code modulation (DPCM), delta modulation (DM), Digital modulation and demodulation schemes : amplitude, phase and frequency keying schemes (ASK, PSK, FSK). Error control coding : error detection and correction, linear block codes, convolution codes. Information measure and source coding. Data networks, 7-layer architecture.

[124]

GEOGRAPHY

PAPER - I

PRINCIPLES OF GEOGRAPHY

Physical Geography:

1. Geomorphology :—Factors controlling landform development; endogenetic and

exogenetic forces; Origin and evolution of the earth’s crust; Fundamentals of

geomagnetism; Physical conditions of the earth’s interior; Geosynclines; Continental

drift; Isostasy; Plate tectonics; Recent views on mountain building; Vulcanicity;

Earthquakes and Tsunamis; Concepts of geomorphic cycles and Landscape

development ; Denudation chronology; Channel morphology; Erosion surfaces; Slope

development; Applied Geomorphology : Geohydrology, economic geology and

environment.

2. Climatology.—Temperature and pressure belts of the world; Heat budget of the

earth; Atmospheric circulation; atmospheric stability and instability. Planetary and local

winds; Monsoons and jet streams; Air masses and fronto genesis, Temperate and

tropical cyclones; Types and distribution of precipitation; Weather and Climate;

Koppen’s, Thornthwaite’s and Trewartha’s classification of world climates;

Hydrological cycle; Global climatic change and role and response of man in climatic

changes, Applied climatology and Urban climate.

3. Oceanography: Bottom topography of the Atlantic, Indian and Pacific Oceans;

Temperature and salinity of the oceans; Heat and salt budgets, Ocean deposits;

Waves, currents and tides; Marine resources : biotic, mineral and energy resources;

Coral reefs, coral bleaching; sea-level changes; law of the sea and marine pollution.

4. Biogeography.—Genesis of soils; Classification and distribution of soils; Soil profile;

Soil erosion, Degradation and conservation; Factors influencing world distribution of

plants and animals; Problems of deforestation and conservation measures; Social

forestry; agro-forestry; Wild life; Major gene pool centres.

5. Environmental Geography.—Principle of ecology; Human ecological adaptations;

Influence of man on ecology and environment; Global and regional ecological

changes and imbalances; Ecosystem their management and conservation;

Environmental degradation, management and conservation; Biodiversity and

sustainable development; Environmental policy; Environmental hazards and remedial

measures; Environmental education and legislation.

Human Geography:

1. Perspectives in Human Geography.—Areal differentiation; regional synthesis;

Dichotomy and dualism; Environmentalism; Quantitative revolution and locational

analysis; radical, behavioural, human and welfare approaches; Languages, religions

and secularisation; Cultural regions of the world; Human development index.

2. Economic Geography.—World economic development: measurement and problems;

World resources and their distribution; Energy crisis; the limits to growth; World

agriculture: typology of agricultural regions; agricultural inputs and productivity; Food

and nutrition problems; Food security; famine: causes, effects and remedies; World

industries: locational patterns and problems; patterns of world trade.

[125]

3. Population and Settlement Geography.—Growth and distribution of world

population; demographic attributes; Causes and consequences of migration; concepts

of over-under-and optimum population; Population theories, world population

problems and policies, Social well-being and quality of life; Population as social

capital. Types and patterns of rural settlements; Environmental issues in rural

settlements; Hierarchy of urban settlements; Urban morphology: Concepts of primate

city and rank-size rule; Functional classification of towns; Sphere of urban influence;

Rural - urban fringe; Satellite towns; Problems and remedies of urbanization;

Sustainable development of cities.

4. Regional Planning.—Concept of a region; Types of regions and methods of

regionalisation; Growth centres and growth poles; Regional imbalances; regional

development strategies; environmental issues in regional planning; Planning for

sustainable development.

5. Models, Theories and Laws in Human Geography.—Systems analysis in Human

geography; Malthusian, Marxian and demographic transition models; Central Place

theories of Christaller and Losch ; Perroux and Boudeville; Von Thunen’s model of

agricultural location; Weber’s model of industrial location; Ostov’s model of stages of

growth. Heartland and Rimland theories; Laws of international boundaries and

frontiers.

PAPER – II

GEOGRAPHY OF INDIA

1. Physical Setting.—Space relationship of India with neighboring countries; Structure

and relief; Drainage system and watersheds; Physiographic regions; Mechanism of

Indian monsoons and rainfall patterns, Tropical cyclones and western disturbances;

Floods and droughts; Climatic regions; Natural vegetation; Soil types and their

distributions.

2. Resources.—Land, surface and ground water, energy, minerals, biotic and marine

resources; Forest and wild life resources and their conservation; Energy crisis.

3. Agriculture.—Infrastructure: irrigation, seeds, fertilizers, power; Institutional factors:

land holdings, land tenure and land reforms; Cropping pattern, agricultural

productivity, agricultural intensity, crop combination, land capability; Agro and social-

forestry; Green revolution and its socio- economic and ecological implications;

Significance of dry farming; Livestock resources and white revolution; aqua - culture;

sericulture, apiculture and poultry; agricultural regionalisation; agro-climatic zones;

agro- ecological regions.

4. Industry.—Evolution of industries; Locational factors of cotton, jute, textile, iron and

steel, aluminium, fertilizer, paper, chemical and pharmaceutical, automobile, cottage

and agro-based industries; Industrial houses and complexes including public sector

undertakings; Industrial regionalisation; New industrial policies; Multinationals and

liberalization; Special Economic Zones; Tourism including eco-tourism.

5. Transport, Communication and Trade.—Road, railway, waterway, airway and

pipeline networks and their complementary roles in regional development; Growing

importance of ports on national and foreign trade; Trade balance; Trade Policy;

Export processing zones; Developments in communication and information

technology and their impacts on economy and society; Indian space programme.

6. Cultural Setting.—Historical Perspective of Indian Society; Racial, linguistic and

ethnic diversities; religious minorities; major tribes, tribal areas and their problems;

[126]

cultural regions; Growth, distribution and density of population; Demographic

attributes: sex-ratio, age structure, literacy rate, work-force, dependency ratio,

longevity; migration (inter-regional, intra- regional and international) and associated

problems; Population problems and policies; Health indicators.

7. Settlements.—Types, patterns and morphology of rural settlements; Urban

developments; Morphology of Indian cities; Functional classification of Indian cities;

Conurbations and metropolitan regions; urban sprawl; Slums and associated

problems; town planning; Problems of urbanization and remedies.

8. Regional Development and Planning.—Experience of regional planning in India;

Five Year Plans; Integrated rural development programmes; Panchayati Raj and

decentralised planning; Command area development; Watershed management;

Planning for backward area, desert, drought prone, hill, tribal area development;

multi-level planning; Regional planning and development of island territories.

9. Political Aspects.—Geographical basis of Indian federalism; State reorganisation;

Emergence of new states; Regional consciousness and inter state issues;

international boundary of India and related issues; Cross border terrorism; India’s role

in world affairs; Geopolitics of South Asia and Indian Ocean realm.

10. Contemporary Issues.—Ecological issues: Environmental hazards: landslides,

earthquakes, Tsunamis, floods and droughts, epidemics; Issues relating to

environmental pollution; Changes in patterns of land use; Principles of environmental

impact assessment and environmental management; Population explosion and food

security; Environmental degradation; Deforestation, desertification and soil erosion;

Problems of agrarian and industrial unrest; Regional disparities in economic

development; Concept of sustainable growth and development; Environmental

awareness; Linkage of rivers; Globalisation and Indian economy.

Note: Candidates will be required to answer one compulsory map question pertinent to

subjects covered by this paper.

[127]

GEOLOGY

PAPER - I

1. General Geology:

The Solar System, Meteorites, Origin and interior of the earth and age of earth; Volcanoes-

causes and products, Volcanic belts; Earthquakes-causes, effects, Seismic zones of India;

Island arcs, trenches and mid-ocean ridges; Continental drifts; Seafloor spreading, Plate

tectonics; Isostasy.

2. Geomorphology and Remote Sensing:

Basic concepts of geomorphology; Weathering and soil formations; Landforms, slopes and

drainage; Geomorphic cycles and their interpretation; Morphology and its relation to structures

and lithology; Coastal geomorphology; Applications of geomorphology in mineral prospecting,

civil engineering; Hydrology and environmental studies; Geomorphology of Indian

subcontinent.

Aerial photographs and their interpretation-merits and limitations; The Electromagnetic

spectrum; Orbiting satellites and sensor systems; Indian Remote Sensing Satellites; Satellites

data products; Applications of remote sensing in geology; The Geographic Information

Systems (GIS) and Global Positioning System (GPS) - its applications.

3. Structural Geology:

Principles of geologic mapping and map reading, Projection diagrams, Stress and strain

ellipsoid and stress-strain relationships of elastic, plastic and viscous materials; Strain

markers in deformed rocks; Behaviour of minerals and rocks under deformation conditions;

Folds and faults classification and mechanics; Structural analysis of folds, foliations,

lineations, joints and faults, unconformities; Time-relationship between crystallization and

deformation.

4. Paleontology:

Species- definition and nomenclature; Megafossils and Microfossils; Modes of preservation of

fossils; Different kinds of microfossils; Application of microfossils in correlation, petroleum

exploration, paleoclimatic and paleoceanographic studies; Evolutionary trend in Hominidae,

Equidae and Proboscidae; Siwalik fauna; Gondwana flora and fauna and its importance;

Index fossils and their significance.

5. Indian Stratigraphy:

Classification of stratigraphic sequences: lithostratigraphic, biostratigraphic, chro-

nostratigraphic and magnetostratigraphic and their interrelationships; Distribution and

classification of Precambrian rocks of India; Study of stratigraphic distribution and lithology of

Phanerozoic rocks of India with reference to fauna, flora and economic importance; Major

boundary problems- Cambrian/Precambrian, Permian/Triassic, Cretaceous/Tertiary and

Pliocene/Pleistocene; Study of climatic conditions, paleogeography and igneous activity in the

[128]

Indian subcontinent in the geological past; Tectonic framework of India; Evolution of the

Himalayas.

6. Hydrogeology and Engineering Geology:

Hydrologic cycle and genetic classification of water; Movement of subsurface water; Springs;

Porosity, permeability, hydraulic conductivity, transmissivity and storage coefficient,

classification of aquifers; Water-bearing characteristics of rocks; Groundwater chemistry; Salt

water intrusion; Types of wells; Drainage basin morphometry; Exploration for groundwater;

Groundwater recharge; Problems and management of groundwater; Rainwater harvesting;

Engineering properties of rocks; Geological investigations for dams, tunnels highways, railway

and bridges; Rock as construction material; Landslides-causes, prevention and rehabilitation;

Earthquake-resistant structures.

PAPER - II

1. Mineralogy:

Classification of crystals into systems and classes of symmetry; International system of

crystallographic notation; Use of projection diagrams to represent crystal symmetry;

Elements of X-ray crystallography.

Physical and chemical characters of rock forming silicate mineral groups; Structural

classification of silicates; Common minerals of igneous and metamorphic rocks; Minerals of

the carbonate, phosphate, sulphide and halide groups; Clay minerals. Optical properties of

common rock forming minerals; Pleochroism, extinction angle, double refraction,

birefringence, twinning and dispersion in minerals.

2. Igneous and Metamorphic Petrology:

Generation and crystallization of magmas; Crystallization of albite-anorthite, diopside-

anorthite and diopside-wollastonite-silica systems; Bowen’s Reaction Principle; Magmatic

differentation and assimilation; Petrogenetic significance of the textures and structures of

igneous rocks; Petrography and petrogenesis of granite, syenite, diorite, basic and ultrabasic

groups, charnockite, anorthosite and alkaline rocks; Carbonatites; Deccan volcanic province.

Types and agents of metamorphism; Metamorphic grades and zones; Phase rule; Facies of

regional and contact metamorphism; ACF and AKF diagrams; Textures and structures of

metamorphic rocks; Metamorphism of arenaceous, argillaceous and basic rocks; Minerals

assemblages Retrograde metamorphism; Metasomatism and granitisation, migmatites,

Granulite terrains of India.

3. Sedimentary Petrology:

Sediments and Sedimentary rocks: Processes of formation; digenesis and lithification; Clastic

and non-clastic rocks-their classification, petrography and depositional environment;

Sedimentary facies and provenance; Sedimentary structures and their significance; Heavy

minerals and their significance; Sedimentary basins of India.

4. Economic Geology:

Ore, ore minerals and gangue, tenor of ore, classification of ore deposits; Process of

formation of minerals deposits; Controls of ore localization; Ore textures and structures;

[129]

Metallogenic epochs and provinces; Geology of the important Indian deposits of aluminium,

chromium, copper, gold, iron, lead zinc, manganese, titanium, uranium and thorium and

industrial minerals; Deposits of coal and petroleum in India; National Mineral Policy;

Conservation and utilization of mineral resources; Marine mineral resources and Law of Sea.

5. Mining Geology:

Methods of prospecting geological, geophysical, geochemical and geobotanical; Techniques

of sampling; Estimation of reserves or ore; Methods of exploration and mining metallic ores,

industrial minerals, marine mineral resources and building stones; Mineral beneficiation and

ore dressing.

6. Geochemistry and Environmental Geology:

Cosmic abundance of elements; Composition of the planets and meteorites; Structure and

composition of Earth and distribution of elements; Trace elements; Elements of crystal

chemistry—types of chemical bonds, coordination number; Isomorphism and polymorphism;

Elementary thermodynamics.

Natural hazards—floods, mass wasting, costal hazards, earthquakes and volcanic activity and

mitigation; Environmental impact of urbanization, mining, industrial and radioactive waste

disposal, use of fertilizers, dumping of mine waste and fly ash; Pollution of ground and surface

water, marine pollution; Environment protection—legislative measures in India; Sea level

changes: causes and impact.

[130]

HISTORY

PAPER - I

1. Sources:

Archaeological sources:

Exploration, excavation, epigraphy, numismatics, monuments

Literary sources:

Indigenous: Primary and secondary; poetry, scientific literature, literature, literature in

regional languages, religious literature.

Foreign accounts: Greek, Chinese and Arab writers.

2. Pre-history and Proto-history:

Geographical factors; hunting and gathering (paleolithic and mesolithic); Beginning of

agriculture (neolithic and chalcolithic).

3. Indus Valley Civilization:

Origin, date, extent, characteristics, decline, survival and significance, art and

architecture.

4. Megalithic Cultures:

Distribution of pastoral and farming cultures outside the Indus, Development of

community life, Settlements, Development of agriculture, Crafts, Pottery, and Iron

industry.

5. Aryans and Vedic Period:

Expansions of Aryans in India.

Vedic Period: Religious and philosophic literature; Transformation from Rig Vedic

period to the later Vedic period; Political, social and economical life; Significance of

the Vedic Age; Evolution of Monarchy and Varna system.

6. Period of Mahajanapadas:

Formation of States (Mahajanapada) : Republics and monarchies; Rise of urban

centres; Trade routes; Economic growth; Introduction of coinage; Spread of Jainism

and Buddhism; Rise of Magadha and Nandas.

Iranian and Macedonian invasions and their impact.

7. Mauryan Empire:

Foundation of the Mauryan Empire, Chandragupta, Kautilya and Arthashastra;

Ashoka; Concept of Dharma; Edicts; Polity, Administration; Economy; Art,

architecture and sculpture; External contacts; Religion; Spread of religion; Literature.

Disintegration of the empire; Sungas and Kanvas.

8. Post - Mauryan Period (Indo-Greeks, Sakas, Kushanas, Western Kshatrapas):

Contact with outside world; growth of urban centres, economy, coinage, development

of religions, Mahayana, social conditions, art, architecture, culture, literature and

science.

[131]

9. Early State and Society in Eastern India, Deccan and South India:

Kharavela, The Satavahanas, Tamil States of the Sangam Age; Administration,

economy, land grants, coinage, trade guilds and urban centres; Buddhist centres;

Sangam literature and culture; Art and architecture.

10. Guptas, Vakatakas and Vardhanas:

Polity and administration, Economic conditions, Coinage of the Guptas, Land grants,

Decline of urban centres, Indian feudalism, Caste system, Position of women,

Education and educational institutions; Nalanda, Vikramshila and Vallabhi, Literature,

scientific literature, art and architecture.

11. Regional States during Gupta Era:

The Kadambas, Pallavas, Chalukyas of Badami; Polity and Administration, Trade

guilds, Literature; growth of Vaishnava and Saiva religions. Tamil Bhakti movement,

Shankaracharya; Vedanta; Institutions of temple and temple architecture; Palas,

Senas, Rashtrakutas, Paramaras, Polity and administration; Cultural aspects. Arab

conquest of Sind; Alberuni, The Chalukyas of Kalyana, Cholas, Hoysalas, Pandyas;

Polity and Administration; local Government; Growth of art and architecture, religious

sects, Institution of temple and Mathas, Agraharas, education and literature, economy

and society.

12. Themes in Early Indian Cultural History:

Languages and texts, major stages in the evolution of art and architecture, major

philosophical thinkers and schools, ideas in Science and Mathematics.

13. Early Medieval India, 750—1200:

- Polity: Major political developments in Northern India and the Peninsula, origin

and the rise of Rajputs

- The Cholas: administration, village economy and society

- “Indian Feudalism”

- Agrarian economy and urban settlements

- Trade and commerce

- Society: the status of the Brahman and the new social order

- Condition of women

- Indian science and technology

14. Cultural Traditions in India, 750—1200:

- Philosophy: Skankaracharya and Vedanta, Ramanuja and Vishishtadvaita,

Madhva and Brahma-Mimansa

- Religion: Forms and features of religion, Tamil devotional cult, growth of Bhakti,

Islam and its arrival in India, Sufism

- Literature: Literature in Sanskrit, growth of Tamil literature, literature in the newly

developing languages, Kalhan’s Rajtarangini, Alberuni’s India

- Art and Architecture: Temple architecture, sculpture, painting

[132]

15. The Thirteenth Century:

- Establishment of the Delhi Sultanate: The Ghurian invasions – factors behind

Ghurian success

- Economic, social and cultural consequences

- Foundation of Delhi Sultanate and early Turkish Sultans

- Consolidation: The rule of Iltutmish and Balban

16. The Fourteenth Century:

- “The Khalji Revolution”

- Alauddin Khalji: Conquests and territorial expansion, agrarian and economic

measures

- Muhammad Tughluq: Major projects, agrarian measures, bureaucracy of

Muhammad Tughluq

- Firuz Tughluq: Agrarian measures, achievements in civil engineering and public

works, decline of the Sultanate, foreign contacts and Ibn Battuta’s account

17. Society, Culture and Economy in the Thirteenth and Fourteenth Centuries:

- Society: composition of rural society, ruling classes, town dwellers, women,

religious classes, caste and slavery under the Sultanate, Bhakti movement, Sufi

movement

- Culture: Persian literature, literature in the regional languages of North India,

literature in the languages of South India, Sultanate architecture and new

structural forms, painting, evolution of a composite culture

- Economy: Agricultural production, rise of urban economy and non-agricultural

production, trade and commerce

18. The Fifteenth and Early Sixteenth Century – Political Developments and

Economy:

- Rise of Provincial Dynasties: Bengal, Kashmir (Zainul Abedin), Gujarat, Malwa,

Bahmanids

- The Vijayanagra Empire

- Lodis

- Mughal Empire, First phase: Babur and Humayun

- The Sur Empire: Sher Shah’s administration

- Portuguese Colonial enterprise

- Bhakti and Sufi Movements

19. The Fifteenth and early Sixteenth Century – Society and Culture:

- Regional cultural specilicities

- Literary traditions

- Provincial architecture

- Society, culture, literature and the arts in Vijayanagara Empire.

[133]

20. Akbar:

- Conquests and consolidation of the Empire

- Establishment of Jagir and Mansab systems

- Rajput policy

- Evolution of religious and social outlook, theory of Sulh-i-kul and religious policy

- Court patronage of art and technology

21. Mughal Empire in the Seventeenth Century:

- Major administrative policies of Jahangir, Shahjahan and Aurangzeb

- The Empire and the Zamindars

- Religious policies of Jahangir, Shahjahan and Aurangzeb

- Nature of the Mughal State

- Late Seventeenth century crisis and the revolts

- The Ahom Kingdom

- Shivaji and the early Maratha Kingdom

22. Economy and Society in the Sixteenth and Seventeenth Centuries:

- Population, agricultural production, craft production

- Towns, commerce with Europe through Dutch, English and French companies : a

trade revolution

- Indian mercantile classes, banking, insurance and credit systems

- Condition of peasants, condition of women

- Evolution of the Sikh community and the Khalsa Panth

23. Culture in the Mughal Empire:

- Persian histories and other literature

- Hindi and other religious literature

- Mughal architecture

- Mughal painting

- Provincial architecture and painting

- Classical music

- Science and technology

24. The Eighteenth Century:

- Factors for the decline of the Mughal Empire

- The regional principalities: Nizam’s Deccan, Bengal, Awadh

- Maratha ascendancy under the Peshwas

[134]

- The Maratha fiscal and financial system

- Emergence of Afghan Power, Battle of Panipat:1761

- State of politics, culture and economy on the eve of the British conquest

PAPER - II

1. European Penetration into India:

The Early European Settlements; The Portuguese and the Dutch; The English and the

French East India Companies; Their struggle for supremacy; Carnatic Wars; Bengal—

The conflict between the English and the Nawabs of Bengal; Siraj and the English;

The Battle of Plassey; Significance of Plassey.

2. British Expansion in India:

Bengal—Mir Jafar and Mir Kasim; The Battle of Buxar; Mysore; The Marathas; The

three Anglo-Maratha Wars; The Punjab.

3. Early Structure of the British Raj:

The early administrative structure; From diarchy to direct control; The Regulating Act

(1773); The Pitt’s India Act (1784); The Charter Act (1833); The voice of free trade

and the changing character of British colonial rule; The English utilitarian and India.

4. Economic Impact of British Colonial Rule:

(a) Land revenue settlements in British India; The Permanent Settlement; Ryotwari

Settlement; Mahalwari Settlement; Economic impact of the revenue

arrangements; Commercialization of agriculture; Rise of landless agrarian

labourers; Impoverishment of the rural society.

(b) Dislocation of traditional trade and commerce; De-industrialisation; Decline of

traditional crafts; Drain of wealth; Economic transformation of India; Railroad and

communication network including telegraph and postal services; Famine and

poverty in the rural interior; European business enterprise and its limitations.

5. Social and Cultural Developments:

The state of indigenous education, its dislocation; Orientalist-Anglicist controversy,

The introduction of western education in India; The rise of press, literature and public

opinion; The rise of modern vernacular literature; Progress of science; Christian

missionary activities in India.

6. Social and Religious Reform movements in Bengal and Other

Areas:

Ram Mohan Roy, The Brahmo Movement; Devendranath Tagore; Iswarchandra

Vidyasagar; The Young Bengal Movement; Dayanada Saraswati; The social reform

movements in India including Sati, widow remarriage, child marriage etc.; The

contribution of Indian renaissance to the growth of modern India; Islamic revivalism—

the Feraizi and Wahabi Movements.

7. Indian Response to British Rule:

Peasant movements and tribal uprisings in the 18th and 19th centuries including the

Rangpur Dhing (1783), the Kol Rebellion (1832), the Mopla Rebellion in Malabar

(1841—1920), the Santal Hul (1855), Indigo Rebellion (1859-60), Deccan Uprising

[135]

(1875) and the Munda Ulgulan (1899-1900); The Great Revolt of 1857 - Origin,

character, causes of failure, the consequences; The shift in the character of peasant

uprisings in the post—1857 period; the peasant movements of the 1920s and 1930s.

8. Factors leading to the birth of Indian Nationalism; Politics of Association; The

Foundation of the Indian National Congress; The Safety-valve thesis relating to the

birth of the Congress; Programme and objectives of Early Congress; the social

composition of early Congress leadership; the Moderates and Extremists; The

Partition of Bengal (1905); The Swadeshi Movement in Bengal; the economic and

political aspects of Swadeshi Movement; The beginning of revolutionary extremism in

India.

9. Rise of Gandhi; Character of Gandhian nationalism; Gandhi’s popular appeal; Rowlatt

Satyagraha; the Khilafat Movement; the Non-cooperation Movement; National politics

from the end of the Non-cooperation movement to the beginning of the Civil

Disobedience movement; the two phases of the Civil Disobedience Movement; Simon

Commission; The Nehru Report; the Round Table Conferences; Nationalism and the

Peasant Movements; Nationalism and Working Class Movements; Women and

Indian youth and students in Indian politics (1885-1947); the election of 1937 and the

formation of ministries; Cripps Mission; the Quit India Movement; the Wavell Plan; The

Cabinet Mission.

10. Constitutional Developments in the Colonial India between 1858 and 1935.

11. Other strands in the National Movement :

The Revolutionaries: Bengal, the Punjab, Maharashtra, U.P, the Madras Presidency,

Outside India.

The Left; The Left within the Congress: Jawaharlal Nehru, Subhas Chandra Bose, the

Congress Socialist Party; the Communist Party of India, other left parties.

12. Politics of Separatism; the Muslim League; the Hindu Mahasabha; Communalism and

the politics of partition; Transfer of power; Independence.

13. Consolidation as a Nation; Nehru’s Foreign Policy; India and her neighbours (1947-

1964); The linguistic reorganisation of States (1935-1947); Regionalism and regional

inequality; Integration of Princely States; Princes in electoral politics; the Question of

National Language.

14. Caste and Ethnicity after 1947; Backward castes and tribes in post-colonial electoral

politics; Dalit movements.

15. Economic development and political change; Land reforms; the politics of planning

and rural reconstruction; Ecology and environmental policy in post - colonial India;

Progress of science.

16. Enlightenment and Modern ideas:

(i) Major ideas of Enlightenment: Kant, Rousseau.

(ii) Spread of Enlightenment in the colonies.

(iii) Rise of socialist ideas (up to Marx); spread of Marxian Socialism.

[136]

17. Origins of Modern Politics:

(i) European States System.

(ii) American Revolution and the Constitution.

(iii) French revolution and aftermath, 1789-1815.

(iv) American Civil War with reference to Abraham Lincoln and the abolition of slavery.

(v) British Democratic Politics, 1815-1850; Parliamentary Reformers, Free Traders,

Chartists.

18. Industrialization:

(i) English Industrial Revolution: Causes and Impact on Society.

(ii) Industrialization in other countries: USA, Germany, Russia, Japan.

(iii) Industrialization and Globalization.

19. Nation-State System:

(i) Rise of Nationalism in 19th century.

(ii) Nationalism: State-building in Germany and Italy.

(iii) Disintegration of Empires in the face of the emergence of nationalities across

the world.

20. Imperialism and Colonialism:

(i) South and South-East Asia.

(ii) Latin America and South Africa.

(iii) Australia.

(iv) Imperialism and free trade: Rise of neo-imperialism.

21. Revolution and Counter-Revolution:

(i) 19th Century European revolutions.

(ii) The Russian Revolution of 1917-1921.

(iii) Fascist Counter-Revolution, Italy and Germany.

(iv) The Chinese Revolution of 1949.

22. World Wars:

(i) 1st and 2nd World Wars as Total Wars: Societal implications.

(ii) World War I: Causes and consequences.

(iii) World War II: Causes and consequence.

23. The World after World War II:

(i) Emergence of two power blocs.

(ii) Emergence of Third World and non-alignment.

(iii) UNO and the global disputes.

[137]

24. Liberation from Colonial Rule:

(i) Latin America-Bolivar.

(ii) Arab World-Egypt.

(iii) Africa-Apartheid to Democracy.

(iv) South-East Asia-Vietnam.

25. Decolonization and Underdevelopment:

(i) Factors constraining development: Latin America, Africa.

26. Unification of Europe:

(i) Post War Foundations: NATO and European Community.

(ii) Consolidation and Expansion of European Community.

(iii) European Union.

27. Disintegration of Soviet Union and the Rise of the Unipolar World:

(i) Factors leading to the collapse of Soviet communism and the Soviet Union,

1985-1991.

(ii) Political Changes in Eastern Europe 1989-2001.

(iii) End of the cold war and US ascendancy in the World as the lone superpower.

[138]

LAW

PAPER - I

Constitutional and Administrative Law

1. Constitution and Constitutionalism: The distinctive features of the Constitution.

2. Fundamental rights – Public interest litigation; Legal Aid; Legal services authority.

3. Relationship between fundamental rights, directive principles and fundamental duties.

4. Constitutional position of the President and relation with the Council of Ministers.

5. Governor and his powers.

6. Supreme Court and High Courts:

(a) Appointments and transfer.

(b) Powers, functions and jurisdiction.

7. Centre, States and local bodies:

(a) Distribution of legislative powers between the Union and the States.

(b) Local bodies.

(c) Administrative relationship among Union, State and Local Bodies.

(d) Eminent domain – State property – common property – community property.

8. Legislative powers, privileges and immunities.

9. Services under the Union and the States:

(a) Recruitment and conditions of services; Constitutional safeguards; Administrative

tribunals.

(b) Union Public Service Commission and State Public Service Commissions –

Power and functions

(c) Election Commission – Power and functions.

10. Emergency provisions.

11. Amendment of the Constitution.

12. Principles of natural justice – Emerging trends and judicial approach.

13. Delegated legislation and its constitutionality.

14. Separation of powers and constitutional governance.

15. Judicial review of administrative action.

16. Ombudsman: Lokayukta, Lokpal etc.

International Law :

1. Nature and definition of international law.

2. Relationship between international law and municipal law.

3. State recognition and state succession.

4. Law of the sea: Inland waters, territorial sea, contiguous zone, continental shelf,

exclusive economic zone, high seas.

[139]

5. Individuals: Nationality, statelessness; Human rights and procedures available for their

enforcement.

6. Territorial jurisdiction of States, extradition and asylum.

7. Treaties: Formation, application, termination and reservation.

8. United Nations: Its principal organs, powers, functions and reform.

9. Peaceful settlement of disputes – different modes.

10. Lawful recourse to force: aggression, self-defence, intervention.

11. Fundamental principles of international humanitarian law – International conventions

and contemporary developments.

12. Legality of the use of nuclear weapons; ban on testing of nuclear weapons; Nuclear –

non proliferation treaty, CTBT.

13. International terrorism, state sponsored terrorism, hijacking, international criminal court.

14. New international economic order and monetary law: WTO, TRIPS, GATT, IMF, World

Bank.

15. Protection and improvement of the human environment: International efforts.

PAPER - II

Law of Crimes

1. General principles of criminal liability: Mens rea and actus reus, mens rea in statutory

offences.

2. Kinds of punishment and emerging trends as to abolition of capital punishment.

3. Preparation and criminal attempt.

4. General exceptions.

5. Joint and constructive liability.

6. Abetment.

7. Criminal conspiracy.

8. Offences against the State.

9. Offences against public tranquility.

10. Offences against human body.

11. Offences against property.

12. Offences against women.

13. Defamation.

14. Prevention of Corruption Act, 1988.

15. Protection of Civil Rights Act, 1955 and subsequent legislative developments.

16. Plea bargaining.

Law of Torts

1. Nature and definition.

2. Liability based upon fault and strict liability; Absolute liability.

[140]

3. Vicarious liability including State liability.

4. General defences.

5. Joint tort feasors.

6. Remedies.

7. Negligence.

8. Defamation.

9. Nuisance.

10. Conspiracy.

11. False imprisonment.

12. Malicious prosecution.

13. Consumer Protection Act, 1986.

Law of Contracts and Mercantile Law

1. Nature and formation of contract/E-contract.

2. Factors vitiating free consent.

3. Void, voidable, illegal and unenforceable agreements.

4. Performance and discharge of contracts.

5. Quasi- Contracts.

6. Consequences of breach of contract.

7. Contract of indemnity, guarantee and insurance.

8. Contract of agency.

9. Sale of goods and hire purchase.

10. Formation and dissolution of partnership.

11. Negotiable Instruments Act, 1881.

12. Arbitration and Conciliation Act, 1996.

13. Standard form contracts.

Contemporary Legal Developments

1. Public Interest Litigation.

2. Intellectual property rights – Concept, types/prospects.

3. Information Technology Law including Cyber Laws – Concept, purpose/prospects.

4. Competition Law—Concept, purpose/ prospects.

5. Alternate Dispute Resolution – Concept, types/prospects.

6. Major statutes concerning environmental law.

7. Right to Information Act.

8. Trial by media.

[141]

MANAGEMENT

The candidate should make a study of the concept and development of management as

science and art drawing upon the contributions of leading thinkers of management and apply

the concepts to the real life of Government and business decision making keeping in view the

changes in the strategic and operative environment.

PAPER – I

1. Managerial Function and Process :

Concept and Foundations of Management, Evolution of Management Thoughts;

Managerial Functions – Planning, Organizing, Controlling; Decision making; Role of

Manager, Managerial skills; Entrepreneurship; Management of innovation; Managing in a

global environment, Flexible Systems Management; Social responsibility and managerial

ethics; Process and customer orientation; Managerial processes on direct and indirect

value chain.

2. Organisational Behaviour and Design :

Conceptual model of organization behaviour; The individual processes – personality,

values and attitude, perception, motivation, learning and reinforcement, work stress and

stress management; The dynamics of organization behaviour – power and politics,

conflict and negotiation, leadership process and styles, communication; The

Organizational Processes - decision making, job design; Classical, Neoclassical and

Contingency approaches to organizational design; Organizational theory and design -

organizational culture, managing cultural diversity, learning organization; organizational

change and development; Knowledge Based Enterprise – systems and processes;

Networked and virtual organizations.

3. Human Resource Management :

HR challenges; HRM functions; The future challenges of HRM; Strategic Management of

human resources; Human resource planning; Job analysis; Job evaluation; Recruitment

and selection; Training and development; Promotion and transfer; Performance

management; Compensation management and benefits; Employee morale and

productivity; Management of organizational climate and Industrial relations; Human

resources accounting and audit; Human resource information system; International

human resource management.

4. Accounting for Managers :

Financial accounting – concept, importance and scope, generally accepted accounting

principles, preparation of financial statements with special reference to analysis of a

balance sheet and measurement of business income, inventory valuation and

depreciation, financial statement analysis, fund flow analysis, the statement of cash

flows; Management accounting – concept, need, importance and scope; Cost accounting

– records and processes, cost ledger and control accounts, reconciliation and integration

between financial and cost accounts; Overhead cost and control, Job and process

costing, Budget and budgetary control, Performance budgeting, Zero-base budgeting,

relevant costing and costing for decision-making, standard costing and variance

analysis, marginal costing and absorption costing.

[142]

5. Financial Management :

Goals of finance function; Concepts of value and return; Valuation of bonds and shares;

Management of working capital: Estimation and financing; Management of cash,

receivables, inventory and current liabilities; Cost of capital; Capital budgeting; Financial

and operating leverage; Design of capital structure: theories and practices; Shareholder

value creation: dividend policy, corporate financial policy and strategy, management of

corporate distress and restructuring strategy; Capital and money markets: institutions

and instruments; Leasing, hire purchase and venture capital; Regulation of capital

market; Risk and return: portfolio theory; CAPM; APT; Financial derivatives: option,

futures, swap; Recent reforms in financial sector.

6. Marketing Management :

Concept, evolution and scope; Marketing strategy formulation and components of

marketing plan; Sogmenting and targeting the market; Positioning and differentiating the

market offering; Analyzing competition; Analyzing consumer markets; Industrial buyer

behaviour; Market research; Product strategy; Pricing strategies; Designing and

managing Marketing channels; Integrated marketing communications; Building customer

satisfaction, Value and retention; Services and non-profit marketing; Ethics in marketing;

Consumer protection; Internet marketing; Retail management; Customer relationship

management; Concept of holistic marketing.

PAPER – II

1. Quantitative Techniques in Decision Making:

Descriptive statistics – tabular, graphical and numerical methods, introduction to

probability, discrete and continuous probability distributions, inferential statistics-

sampling distributions, central limit theorem, hypothesis testing for differences between

means and proportions, inference about population variances, Chi-square and ANOVA,

simple correlation and regression, time series and forecasting, decision theory, index

numbers; Linear programming – problem formulation, simplex method and graphical

solution, sensitivity analysis.

2. Production and Operations Management:

Fundamentals of operations management; Organizing for production; Aggregate

production planning, capacity planning, plant design: process planning, plant size and

scale of operations, Management of facilities; Line balancing; Equipment replacement

and maintenance; Production control; Supply chain management - vendor evaluation

and audit; Quality management; Statistical process control, Six Sigma; Flexibility and

agility in manufacturing systems; World class manufacturing; Project management

concepts, R&D management, Management of service operations; Role and importance

of materials management, value analysis, make or buy decision; Inventory control, MRP;

Waste management.

3. Management Information System:

Conceptual foundations of information systems; Information theory; Information resource

management; Types of information systems; Systems development - Overview of

systems and design; System development management life-cycle, Designing for online

[143]

and distributed environments; Implementation and control of project; Trends in

information technology; Managing data resources - Organising data; DSS and RDBMS;

Enterprise Resource Planning (ERP), Expert systems, e-Business architecture, e-

Governance; Information systems planning, Flexibility in information systems; User

involvement; Evaluation of information systems.

4. Government Business Interface:

State participation in business, Interaction between Government, Business and different

Chambers of Commerce and Industry in India; Government’s policy with regard to Small

Scale Industries; Government clearances for establishing a new enterprise; Public

Distribution System; Government control over price and distribution; Consumer

Protection Act (CPA) and The Role of voluntary organizations in protecting consumers’

rights; New Industrial Policy of the Government: liberalization, deregulation and

privatisation; Indian planning system; Government policy concerning development of

Backward areas/regions; The Responsibilities of the business as well as the

Government to protect the environment; Corporate Governance; Cyber Laws.

5. Strategic Management:

Business policy as a field of study; Nature and scope of strategic management,

Strategic intent, vision, objectives and policies; Process of strategic planning and

implementation; Environmental analysis and internal analysis; SWOT analysis; Tools

and techniques for strategic analysis—Impact matrix: The experience curve, BCG

matrix, GEC mode, Industry analysis, Concept of value chain; Strategic profile of a firm;

Framework for analysing competition; Competitive advantage of a firm; Generic

competitive strategies; Growth strategies—expansion, integration and diversification;

Concept of core competence, Strategic flexibility; Reinventing strategy; Strategy and

structure; Chief Executive and Board; Turnaround management; Management of

strategic change; Strategic alliances, Mergers and Acquisitions; Strategy and corporate

evolution in the Indian context.

6. International Business:

International Business Environment: Changing composition of trade in goods and

services; India’s Foreign Trade: Policy and trends; Financing of International trade;

Regional Economic Cooperation; FTAs; Internationalisation of service firms;

International production; Operation Management in International companies;

International Taxation; Global competitiveness and technological developments; Global

e-Business; Designing global organisational structure and control; Multicultural

management; Global business strategy; Global marketing strategies; Export

Management; Export—Import procedures; Joint Ventures; Foreign Investment: Foreign

direct investment and foreign portfolio investment; Cross-border Mergers and

Acquisitions; Foreign Exchange Risk Exposure Management; World Financial Markets

and International Banking; External Debt Management; Country Risk Analysis.

[144]

MATHEMATICS

PAPER - I

(1) Linear Algebra:

Vector spaces over R and C, linear dependence and independence, subspaces, bases, dimension; Linear transformations, rank and nullity, matrix of a linear transformation.

Algebra of Matrices; Row and column reduction, Echelon form, congruence’s and similarity; Rank of a matrix; Inverse of a matrix; Solution of system of linear equations; Eigenvalues and eigenvectors, characteristic polynomial, Cayley-Hamilton theorem, Symmetric, skew-symmetric, Hermitian, skew-Hermitian, orthogonal and unitary matrices and their eigenvalues.

(2) Calculus:

Real numbers, functions of a real variable, limits, continuity, differentiability, mean-value theorem, Taylor’s theorem with remainders, indeterminate forms, maxima and minima, asymptotes; Curve tracing; Functions of two or three variables: limits, continuity, partial derivatives, maxima and minima, Lagrange’s method of multipliers, Jacobian.

Riemann’s definition of definite integrals; Indefinite integrals; Infinite and improper integrals; Double and triple integrals (evaluation techniques only); Areas, surface and volumes.

(3) Analytic Geometry:

Cartesian and polar coordinates in three dimensions, second degree equations in three variables, reduction to canonical forms, straight lines, shortest distance between two skew lines; Plane, sphere, cone, cylinder, paraboloid, ellipsoid, hyperboloid of one and two sheets and their properties.

(4) Ordinary Differential Equations:

Formulation of differential equations; Equations of first order and first degree, integrating factor; Orthogonal trajectory; Equations of first order but not of first degree, Clairaut’s equation, singular solution.

Second and higher order linear equations with constant coefficients, complementary function, particular integral and general solution.

Second order linear equations with variable coefficients, Euler-Cauchy equation; Determination of complete solution when one solution is known using method of variation of parameters.

Laplace and Inverse Laplace transforms and their properties; Laplace transforms of elementary functions. Application to initial value problems for 2nd order linear equations with constant coefficients.

(5) Dynamics & Statics:

Rectilinear motion, simple harmonic motion, motion in a plane, projectiles; constrained motion; Work and energy, conservation of energy; Kepler’s laws, orbits under central forces.

Equilibrium of a system of particles; Work and potential energy, friction; common catenary; Principle of virtual work; Stability of equilibrium, equilibrium of forces in three dimensions.

(6) Vector Analysis:

Scalar and vector fields, differentiation of vector field of a scalar variable; Gradient, divergence and curl in cartesian and cylindrical coordinates; Higher order derivatives; Vector identities and vector equations.

Application to geometry: Curves in space, Curvature and torsion; Serret-Frenet’s formulae.

Gauss and Stokes’ theorems, Green’s identities.

[145]

PAPER - II

(1) Algebra:

Groups, subgroups, cyclic groups, cosets, Lagrange’s Theorem, normal subgroups, quotient

groups, homomorphism of groups, basic isomorphism theorems, permutation groups,

Cayley’s theorem.

Rings, subrings and ideals, homomorphisms of rings; Integral domains, principal ideal

domains, Euclidean domains and unique factorization domains; Fields, quotient fields.

(2) Real Analysis:

Real number system as an ordered field with least upper bound property; Sequences, limit of

a sequence, Cauchy sequence, completeness of real line; Series and its convergence,

absolute and conditional convergence of series of real and complex terms, rearrangement of

series.

Continuity and uniform continuity of functions, properties of continuous functions on compact

sets.

Riemann integral, improper integrals; Fundamental theorems of integral calculus.

Uniform convergence, continuity, differentiability and integrability for sequences and series of

functions; Partial derivatives of functions of several (two or three) variables, maxima and

minima.

(3) Complex Analysis:

Analytic functions, Cauchy-Riemann equations, Cauchy’s theorem, Cauchy’s integral formula,

power series representation of an analytic function, Taylor’s series; Singularities; Laurent’s

series; Cauchy’s residue theorem; Contour integration.

(4) Linear Programming:

Linear programming problems, basic solution, basic feasible solution and optimal solution;

Graphical method and simplex method of solutions; Duality.

Transportation and assignment problems.

(5) Partial differential equations:

Family of surfaces in three dimensions and formulation of partial differential equations;

Solution of quasilinear partial differential equations of the first order, Cauchy’s method of

characteristics; Linear partial differential equations of the second order with constant

coefficients, canonical form; Equation of a vibrating string, heat equation, Laplace equation

and their solutions.

(6) Numerical Analysis and Computer programming:

Numerical methods: Solution of algebraic and transcendental equations of one variable by

bisection, Regula-Falsi and Newton-Raphson methods; solution of system of linear equations

by Gaussian elimination and Gauss-Jordan (direct), Gauss-Seidel(iterative) methods.

Newton’s (forward and backward) interpolation, Lagrange’s interpolation.

Numerical integration: Trapezoidal rule, Simpson’s rules, Gaussian quadrature formula.

Numerical solution of ordinary differential equations: Euler and Runga Kutta-methods.

[146]

Computer Programming: Binary system; Arithmetic and logical operations on numbers; Octal

and Hexadecimal systems; Conversion to and from decimal systems; Algebra of binary

numbers.

Elements of computer systems and concept of memory; Basic logic gates and truth tables,

Boolean algebra, normal forms.

Representation of unsigned integers, signed integers and reals, double precision reals and

long integers.

Algorithms and flow charts for solving numerical analysis problems.

(7) Mechanics and Fluid Dynamics:

Generalized coordinates; D’ Alembert’s principle and Lagrange’s equations; Hamilton

equations; Moment of inertia; Motion of rigid bodies in two dimensions.

Equation of continuity; Euler’s equation of motion for inviscid flow; Stream-lines, path of a

particle; Potential flow; Two-dimensional and axisymmetric motion; Sources and sinks, vortex

motion; Navier-Stokes equation for a viscous fluid.

[147]

MECHANICAL ENGINEERING

PAPER - I

1. Mechanics:

1.1 Mechanics of rigid bodies:

Equations of equilibrium in space and its application; first and second moments of

area; simple problems on friction; kinematics of particles for plane motion; elementary

particle dynamics.

1.2 Mechanics of deformable bodies:

Generalized Hooke’s law and its application; design problems on axial stress, shear

stress and bearing stress; material properties for dynamic loading; bending shear and

stresses in beams;. determination of principle stresses and strains—analytical and

graphical; compound and combined stresses; bi-axial stresses—thin walled pressure

vessel; material behaviour and design factors for dynamic load; design of circular

shafts for bending and torsional load only; deflection of beam for statically determinate

problems; theories of failure.

2. Engineering Materials:

Basic concepts on structure of solids; common ferrous and non-ferrous materials and

their applications; heat-treatment of steels; non-metals- plastics, ceramics, composite

materials and nano-materials.

3. Theory of Machines:

Kinematic and dynamic analysis of plane mechanisms. Cams, Gears and epicyclic

gear trains, flywheels, governors, balancing of rigid rotors, balancing of single and

multicylinder engines, linear vibration analysis of mechanical systems (single degree

of freedom), Critical speeds and whirling of shafts.

4. Manufacturing Science:

4.1 Manufacturing Process:

Machine tool engineering—Merchant’s force analysis; Taylor’s tool life equation;

conventional machining; NC and CNC machining process; jigs and fixtures.

Non-conventional machining – EDM, ECM, ultrasonic, water jet machining etc;

application of lasers and plasmas; energy rate calculations.

Forming and welding processes—standard processes.

Metrology—concept of fits and tolerances; tools and gauges; comparators; inspection

of length; position; profile and surface finish.

4.2. Manufacturing Management:

System design: factory location—simple OR models; plant layout— methods based;

applications of engineering economic analysis and break— even analysis for product

selection, process selection and capacity planning; predetermined time standards.

[148]

System planning; forecasting methods based on regression and decomposition,

design and balancing of multi model and stochastic assembly lines; Inventory

management—probabilistic inventory models for order time and order quantity

determination; JIT systems; strategic sourcing; managing inter plant logistics.

System operations and control: Scheduling algorithms for job shops; applications of

statistical methods for product and process quality control —applications of control

charts for mean, range, percent defective, number of defectives and defects per unit;

quality cost systems; management of resources, organizations and risks in projects.

System improvement: Implementation of systems, such as total quality management,

developing and managing flexible, lean and agile organizations.

PAPER - II

1. Thermodynamics, Gas Dynamics and Turbine:

1.1 Basic concept of First –law and second law of Thermodynamics; concept of entropy

and reversibility; availability and unavailability and irreversibility.

1.2 Classification and properties of fluids; incompressible and compressible fluids flows;

effect of Mach number and compressibility; continuity momentum and energy

equations; normal and oblique shocks; one dimensional isentropic flow; flow or fluids

in duct with frictions that transfer.

1.3 Flow through fans, blowers and compressors; axial and centrifugal flow configuration;

design of fans and compressors; single problems compresses and turbine cascade;

open and closed cycle gas turbines; work done in the gas turbine; reheat and

regenerators.

2. Heat Transfer:

2.1 Conduction heat transfer—general conduction equation—Laplace, Poisson and

Fourier equations; Fourier law of conduction; one dimensional steady state heat

conduction applied to simple wall, solid and hollow cylinder & spheres.

2.2 Convection heat transfer—Newton’s law of convection; free and forces convection;

heat transfer during laminar and turbulent flow of an incompressible fluid over a flat

plate; concepts of Nusselt number, hydrodynamic and thermal boundary layer their

thickness; Prandtl number; analogy between heat and momentum transfer—

Reynolds, Colbum, Prandtl analogies; heat transfer during laminar and turbulent flow

through horizontal tubes; free convection from horizontal and vertical plates.

2.3 Black body radiation—basic radiation laws such as Stefan-Boltzman, Planck

distribution, Wein’s displacement etc.

2.4 Basic heat exchanger analysis; classification of heat exchangers.

3. I .C. Engines:

3.1 Classification, thermodynamic cycles of operation; determination of break power,

indicated power, mechanical efficiency, heat balance sheet, interpretation of

performance characteristics, petrol, gas and diesel engines.

[149]

3.2 Combustion in SI and CI engines, normal and abnormal combustion; effect of working

parameters on knocking, reduction of knocking; Forms of combustion chamber for SI

and CI engines; rating of fuels; additives; emission.

3.3 Different systems of IC engines—fuels; lubricating; cooling and transmission systems.

Alternate fuels in IC engines.

4. Steam Engineering:

4.1 Steam generation—modified Rankine cycle analysis; Modern steam boilers; steam at

critical and supercritical pressures; draught equipment; natural and artificial draught;

boiler fuels solid, liquid and gaseous fuels. Steam turbines—principle; types;

compounding; impulse and reaction turbines; axial thrust.

4.2 Steam nozzles—flow of steam in convergent and divergent nozzle; pressure at throat

for maximum discharge with different initial steam conditions such as wet, saturated

and superheated, effect of variation of back pressure; supersaturated flow of steam in

nozzles, Wilson line.

4.3 Rankine cycle with internal and external irreversibility; reheat factor; reheating and

regeneration, methods of governing; back pressure and pass out turbines.

4.4 Steam power plants—combined cycle power generation; heat recovery steam

generators (HRSG) fired and unfired, co-generation plants.

5. Refrigeration and air-conditioning:

5.1 Vapour compression refrigeration cycle—cycle on p-H & T-s diagrams; eco-friendly

refrigerants—R134a,123; Systems like evaporators, condensers, compressor,

expansion devices. Simple vapour absorption systems.

5.2 Psychrometry—properties; processes; charts; sensible heating and cooling;

humidification and dehumidification effective temperature; air-conditioning load

calculation; simple duct design.

[150]

MEDICAL SCIENCE

PAPER - I

1. Human Anatomy:

Applied anatomy including blood and nerve supply of upper and lower limbs and joints

of shoulder, hip and knee.

Gross anatomy, blood supply and lymphatic drainage of tongue, thyroid, mammary

gland, stomach, liver, prostate, gonads and uterus

Applied anatomy of diaphragm, perineum and inguinal region.

Clinical anatomy of kidney, urinary bladder, uterine tubes, vas deferens.

Embryology: Placenta and placental barrier. Development of heart, gut, kidney,

uterus, ovary, testis and their common congenital abnormalities.

Central and peripheral autonomic nervous system : Gross and clinical anatomy of

ventricles of brain, circulation of cerebrospinal fluid; Neural pathways and lesions of

cutaneous sensations, hearing and vision; Cranial nerves, distribution and clinical

significance; Components of autonomic nervous system.

2. Human Physiology :

Conduction and transmission of impulse, mechanism of contraction, neuromuscular

transmission, reflexes, control of equilibrium, posture and muscle tone, descending

pathways, functions of cerebellum, basal ganglia, Physiology of sleep and

consciousness.

Endocrine system : Mechanism of action of hormones, formation, secretion,

transport, metabolism, function and regulation of secretion of pancreas and pituitary

gland.

Physiology of reproductive system : menstrual cycle, lactation, pregnancy.

Blood : Development, regulation and fate of blood cells.

Cardio-vascular, cardiac output, blood pressure, regulation of cardiovascular

functions.

3. Biochemistry :

Organ function tests-liver, kidney, thyroid.

Protein synthesis.

Vitamins and minerals.

Restriction fragment length polymorphism (RFLP).

Polymerase chain reaction (PCR).

Radio - immunoassays (RIA).

4. Pathology:

Inflammation and repair, disturbances of growth and cancer, Pathogenesis and

histopathology of rheumatic and ischemic heart disease and diabetes mellitus.

Differentiation between benign, malignant, primary and metastatic malignancies,

Pathogenesis and histopathology of bronchogenic carcinoma, carcinoma breast, oral

cancer, cancer cervix, leukemia, Etiology, pathogenesis and histopathology of -

cirrhosis liver, glomerulonephritis, tuberculosis, acute osteomyelitis.

[151]

5. Microbiology:

Humoral and cell mediated immunity

Diseases caused by and laboratory diagnosis of-

* Meningococcus, Salmonella

* Shigella, Herpes, Dengue, Polio

* HIV/AIDS, Malaria, E. Histolytica, Giardia

* Candida, Cryptococcus, Aspergillus

6. Pharmacology:

Mechanism of action and side effects of the following drugs :

* Antipyretics and analgesics, Antibiotics, Antimalaria; Antikala-azar, Antidiabetics

* Antihypertensive, Antidiuretics, General and cardiac vasodilators, Antiviral, Antiparasitic, Antifungal, Immunosuppressants

* Anticancer

7. Forensic Medicine and Toxicology:

Forensic examination of injuries and wounds; Examination of blood and seminal stains; poisoning, sedative overdose, hanging, drowning, burns, DNA and finger print study.

PAPER - II

1. General Medicine:

Etiology, clinical features, diagnosis and principles of management (including prevention) of: - Tetanus, Rabies, AIDS, Dengue, Kala-azar, Japanese Encephalitis.

Etiology, clinical features, diagnosis and principles of management of :

Ischaemic heart disease, pulmonary embolism.

Bronchial asthma.

Pleural effusion, tuberculosis, Malabsorption syndromes, acid peptic diseases, Viral hepatitis and cirrhosis of liver.

Glomerulonerphritis and pyelonephritis, renal failure, nephrotic syndrome, renovascular hypertension, complications of diabetes mellitus, coagulation disorders, leukemia, Hypo and hyper thyrodism, meningitis and encephalitis.

Imaging in medical problems, ultrasound, echocardiogram, CT scan, MRI.

Anxiety and Depressive Psychosis and schizophrenia and ECT.

2. Pediatrics:

Immunization, Baby friendly hospital, congenital cyanotic heart disease, respiratory distress syndrome, broncho - pneumonias, kernicterus. IMNCI classification and management, PEM grading and management. ARI and Diarrhea of under five and their management.

3. Dermatology:

Psoriasis, Allergic dermatitis, scabies, eczema, vitiligo, Stevan Johnson’s syndrome, Lichen Planus.

4. General Surgery:

Clinical features, causes, diagnosis and principles of management of cleft palate, harelip.

[152]

Laryngeal tumor, oral and esophageal tumors.

Peripheral arterial diseases, varicose veins, coarctation of aorta.

Tumors of Thyroid, Adrenal Glands.

Abscess, cancer, fibroadenoma and adenosis of breast.

Bleeding peptic ulcer, tuberculosis of bowel, ulcerative colitis, cancer stomach.

Renal mass, cancer Prostate.

Haemothorax, stones of Gall bladder, Kidney, Ureter and Urinary Bladder.

Management of surgical conditions of Rectum, Anus and Anal canal, Gall bladder and Bile ducts.

Splenomegaly, cholecystitis, portal hypertension, liver abscess, peritonitis, carcinoma head of pancreas.

Fractures of spine, Colles’ fracture and bone tumors.

Endoscopy.

Laprascopic Surgery.

5. Obstetrics and Gynaecology including Family Planning:

Diagnosis of pregnancy.

Labour management, complications of 3rd stage, Antepartum and postpartum hemorrhage, resuscitation of the newborn, Management of abnormal lie and difficult labour, Management of small for date or premature newborn.

Diagnosis and management of anemia. Preeclampsia and Toxaemias of pregnancy, Management of Post menopausal Syndrome.

Intra-uterine devices, pills, tubectomy and vasectomy. Medical termination of pregnancy including legal aspects.

Cancer cervix.

Leucorrhoea, pelvic pain, infertility, dysfunctional uterine bleeding (DUB), amenorrhoea, Fibroid and prolapse of uterus.

6. Community Medicine (Preventive and Social Medicine) :

Principles, methods, approach and measurements of Epidemiology.

Nutrition, nutritional diseases / disorders & Nutrition Programmes.

Health information Collection, Analysis and Presentation.

Objectives, components and critical analysis of National programmes for control/eradication of :

Malaria, Kala-azar, Filaria and Tuberculosis.

HIV/AIDS, STDs and Dengue.

Critical appraisal of Health care delivery system.

Health management and administration : Techniques, Tools, Programme Implementation and Evaluation.

Objective, Component, Goals and Status of Reproductive and Child Health, National Rural Health Mission and Millennium Development Goals.

Management of hospital and industrial waste.

[153]

PHILOSOPHY

PAPER - I

History and Problems of Philosophy:

1. Plato and Aristotle : Ideas; Substance; Form and Matter; Causation; Actuality and

Potentiality.

2. Rationalism (Descartes, Spinoza, Leibniz): Cartesian Method and Certain

Knowledge; Substance; God; Mind-Body Dualism; Determinism and Freedom.

3. Empiricism (Locke, Berkeley, Hume): Theory of Knowledge; Substance and Qualities;

Self and God; Scepticism.

4. Kant: Possibility of Synthetic a priori Judgments; Space and Time; Categories; Ideas

of Reason; Antinomies; Critique of Proofs for the Existence of God.

5. Hegel : Dialectical Method; Absolute Idealism.

6. Moore, Russell and Early Wittgenstein: Defence of Commonsense; Refutation of

Idealism; Logical Atomism; Logical Constructions; Incomplete Symbols; Picture

Theory of Meaning; Saying and Showing.

7. Logical Positivism: Verification Theory of Meaning; Rejection of Metaphysics;

Linguistic Theory of Necessary Propositions.

8. Later Wittgenstein : Meaning and Use; Language-games; Critique of Private

Language.

9. Phenomenology (Husserl): Method; Theory of Essences; Avoidance of Psychologism.

10. Existentialism (Kierkegaard, Sartre, Heidegger) : Existence and Essence; Choice,

Responsibility and Authentic Existence; Being-in-the –world and Temporality.

11. Quine and Strawson: Critique of Empiricism; Theory of Basic Particulars and Persons.

12. Cârvâka : Theory of Knowledge; Rejection of Transcendent Entities.

13. Jainism : Theory of Reality; Saptabhaoginaya; Bondage and Liberation.

14. Schools of Buddhism: Pratityasamutpada; Ksanikavada, Nairatmyavada.

15. Nyâya- Vaiúesika : Theory of Categories; Theory of Appearance; Theory of Pramâna;

Self, Liberation; God; Proofs for the Existence of God; Theory of Causation; Atomistic

Theory of Creation.

16. Sâmkhya : Prakrti; Purusa; Causation; Liberation.

17. Yoga : Citta; Cittavrtti; Klesas; Samadhi; Kaivalya.

18. Mimamsa : Theory of Knowledge.

19. Schools of Vedanta : Brahman; luvara; Atman; Jiva; Jagat; Maya; Avidya; Adhyasa;

Moksa; Aprthaksiddhi; Pancavidhabheda.

20. Aurobindo : Evolution, Involution; Integral Yoga.

[154]

PAPER – II

Socio-Political Philosophy :

1. Social and Political Ideals: Equality, Justice, Liberty.

2. Sovereignty: Austin, Bodin, Laski, Kautilya.

3. Individual and State: Rights; Duties and Accountability

4. Forms of Government: Monarchy; Theocracy and Democracy.

5. Political Ideologies: Anarchism; Marxism and Socialism

6. Humanism; Secularism; Multiculturalism.

7. Crime and Punishment: Corruption, Mass Violence, Genocide, Capital Punishment.

8. Development and Social Progress.

9. Gender Discrimination: Female Foeticide, Land and Property Rights; Empowernment.

10. Caste Discrimination: Gandhi and Ambedkar

Philosophy of Religion:

1. Notions of God: Attributes; Relation to Man and the World (Indian and

Western).

2. Proofs for the Existence of God and their Critique (Indian and Western).

3. Problem of Evil.

4. Soul: Immortality; Rebirth and Liberation.

5. Reason, Revelation and Faith.

6. Religious Experience: Nature and Object (Indian and Western).

7. Religion without God.

8. Religion and Morality.

9. Religious Pluralism and the Problem of Absolute Truth.

10. Nature of Religious Language: Analogical and Symbolic; Cognitivist and Non-

cognitive.

[155]

PHYSICS

PAPER - I

1. (a) Mechanics of Particles:

Laws of motion; conservation of energy and momentum, applications to rotating

frames, centripetal and Coriolis accelerations; Motion under a central force;

Conservation of angular momentum, Kepler’s laws; Fields and potentials;

Gravitational field and potential due to spherical bodies, Gauss and Poisson

equations, gravitational self-energy; Two-body problem; Reduced mass; Rutherford

scattering; Centre of mass and laboratory reference frames.

(b) Mechanics of Rigid Bodies:

System of particles; Centre of mass, angular momentum, equations of motion;

Conservation theorems for energy, momentum and angular momentum; Elastic and

inelastic collisions; Rigid body; Degrees of freedom, Euler’s theorem, angular velocity,

angular momentum, moments of inertia, theorems of parallel and perpendicular axes,

equation of motion for rotation; Molecular rotations (as rigid bodies); Di and tri-atomic

molecules; Precessional motion; top, gyroscope.

(c) Mechanics of Continuous Media:

Elasticity, Hooke’s law and elastic constants of isotropic solids and their inter-relation;

Streamline (Laminar) flow, viscosity, Poiseuille’s equation, Bernoulli’s equation,

Stokes’ law and applications.

(d) Special Relativity:

Michelson-Morley experiment and its implications; Lorentz transformations—length

contraction, time dilation, addition of relativistic velocities, aberration and Doppler

effect, mass-energy relation, simple applications to a decay process; Four

dimensional momentum vector; Covariance of equations of physics.

2. Waves and Optics:

(a) Waves:

Simple harmonic motion, damped oscillation, forced oscillation and resonance; Beats;

Stationary waves in a string; Pulses and wave packets; Phase and group velocities;

Reflection and Refraction from Huygens’ principle.

(b) Geometrical Optics:

Laws of reflection and refraction from Fermat’s principle; Matrix method in paraxial

optics—thin lens formula, nodal planes, system of two thin lenses, chromatic and

spherical aberrations.

(c) Interference:

Interference of light-Young’s experiment, Newton’s rings, interference by thin films,

Michelson interferometer; Multiple beam interference and Fabry-Perot interferometer.

[156]

(d) Diffraction:

Fraunhofer diffraction—single slit, double slit, diffraction grating, resolving power;

Diffraction by a circular aperture and the Airy pattern; Fresnel diffraction: half-period

zones and zone plates, circular aperture.

(e) Polarization and Modern Optics:

Production and detection of linearly and circularly polarized light; Double refraction,

quarter wave plate; Optical activity; Principles of fibre optics, attenuation; Pulse

dispersion in step index and parabolic index fibres; Material dispersion, single mode

fibres; Lasers—Einstein A and B coefficients; Ruby and He-Ne lasers; Characteristics

of laser light-spatial and temporal coherence; Focusing of laser beams; Three-level

scheme for laser operation; Holography and simple applications.

3. Electricity and Magnetism:

(a) Electrostatics and Magnetostatics:

Laplace and Poisson equations in electrostatics and their applications; Energy of a

system of charges, multipole expansion of scalar potential; Method of images and its

applications; Potential and field due to a dipole, force and torque on a dipole in an

external field; Dielectrics, polarization; Solutions to boundary-value problems—

conducting and dielectric spheres in a uniform electric field; Magnetic shell, uniformly

magnetized sphere; Ferromagnetic materials, hysteresis, energy loss.

(b) Current Electricity:

Kirchhoff’s laws and their applications; Biot-Savart law, Ampere’s law, Faraday’s law,

Lenz’ law; Self-and mutual-inductances; Mean and r m s values in AC circuits; DC and

AC circuits with R, L and C components; Series and parallel resonances; Quality

factor; Principle of transformer.

(c) Electromagnetic Waves and Blackbody Radiation:

Displacement current and Maxwell’s equations; Wave equations in vacuum, Poynting

theorem; Vector and scalar potentials; Electromagnetic field tensor, covariance of

Maxwell’s equations; Wave equations in isotropic dielectrics, reflection and refraction

at the boundary of two dielectrics; Fresnel’s relations; Total internal reflection; Normal

and anomalous dispersion; Rayleigh scattering; Blackbody radiation and Planck’s

radiation law, Stefan-Boltzmann law, Wien’s displacement law and Rayleigh-Jeans’

law.

4. Thermal and Statistical Physics:

(a) Thermodynamics:

Laws of thermodynamics, reversible and irreversible processes, entropy; Isothermal,

adiabatic, isobaric, isochoric processes and entropy changes; Otto and Diesel

engines, Gibbs’ phase rule and chemical potential; van der Waals equation of state of

[157]

a real gas, critical constants; Maxwell-Boltzman distribution of molecular velocities,

transport phenomena, equipartition and virial theorems; Dulong-Petit, Einstein, and

Debye’s theories of specific heat of solids; Maxwell relations and applications;

Clausius—Clapeyron equation; Adiabatic demagnetisation, Joule-Kelvin effect and

liquefaction of gases.

(b) Statistical Physics:

Macro and micro states, statistical distributions, Maxwell-Boltzmann, Bose-Einstein

and Fermi-Dirac distributions, applications to specific heat of gases and blackbody

radiation; Concept of negative temperatures.

PAPER - II

1. Quantum Mechanics:

Wave-particle dualitiy; Schroedinger equation and expectation values; Uncertainty

principle; Solutions of the one-dimensional Schroedinger equation for a free particle

(Gaussian wave-packet), particle in a box, particle in a finite well, linear harmonic

oscillator; Reflection and transmission by a step potential and by a rectangular barrier;

Particle in a three dimensional box, density of states, free electron theory of metals;

Angular momentum; Hydrogen atom; Spin half particles, properties of Pauli spin

matrices.

2. Atomic and Molecular Physics:

Stern-Gerlach experiment, electron spin, fine structure of hydrogen atom; L-S

coupling, J-J coupling; Spectroscopic notation of atomic states; Zeeman effect; Frank-

Condon principle and applications; Elementary theory of rotational, vibratonal and

electronic spectra of diatomic molecules; Raman effect and molecular structure; Laser

Raman spectroscopy; Importance of neutral hydrogen atom, molecular hydrogen and

molecular hydrogen ion in astronomy; Fluorescence and Phosphorescence;

Elementary theory and applications of NMR and EPR; Elementary ideas about Lamb

shift and its significance.

3. Nuclear and Particle Physics:

Basic nuclear properties-size, binding energy, angular momentum, parity, magnetic

moment; Semi-empirical mass formula and applications, mass parabolas; Ground

state of deuteron, magnetic moment and non-central forces; Meson theory of nuclear

forces; Salient features of nuclear forces; Shell model of the nucleus - successes and

limitations; Violation of parity in beta decay; Gamma decay and internal conversion;

Elementary ideas about Mossbauer spectroscopy; Q-value of nuclear reactions;

Nuclear fission and fusion, energy production in stars; Nuclear reactors.

Classification of elementary particles and their interactions; Conservation laws; Quark

structure of hadrons; Field quanta of electroweak and strong interactions; Elementary

ideas about unification of forces; Physics of neutrinos.

[158]

4. Solid State Physics, Devices and Electronics:

Crystalline and amorphous structure of matter; Different crystal systems, space

groups; Methods of determination of crystal structure; X-ray diffraction, scanning and

transmission electron microscopies; Band theory of solids - conductors, insulators and

semiconductors; Thermal properties of solids, specific heat, Debye theory;

Magnetism: dia, para and ferromagnetism; Elements of superconductivity, Meissner

effect, Josephson junctions and applications; Elementary ideas about high

temperature superconductivity.

Intrinsic and extrinsic semiconductors; p-n-p and n-p-n transistors; Amplifiers and

oscillators; Op-amps; FET, JFET and MOSFET; Digital electronics-Boolean identities,

De Morgan’s laws, logic gates and truth tables; Simple logic circuits; Thermistors,

solar cells; Fundamentals of microprocessors and digital computers.

[159]

POLITICAL SCIENCE AND INTERNATIONAL RELATIONS

PAPER - I

Political Theory and Indian Politics:

1. Political Theory: meaning and approaches.

2. Theories of the State: Liberal, Neo-liberal, Marxist, Pluralist, Post-colonial and

feminist.

3. Justice: Conceptions of justice with special reference to Rawl’s theory of justice and

its communitarian critiques.

4. Equality: Social, political and economic; relationship between equality and freedom;

Affirmative action.

5. Rights: Meaning and theories; different kinds of rights; concept of Human Rights.

6. Democracy: Classical and contemporary theories; different models of democracy –

representative, participatory and deliberative.

7. Concept of power, hegemony, ideology and legitimacy.

8. Political Ideologies: Liberalism, Socialism, Marxism, Fascism, Gandhism and

Feminism.

9. Indian Political Thought : Dharamshastra, Arthashastra and Buddhist traditions; Sir

Syed Ahmed Khan, Sri Aurobindo, M.K. Gandhi, B.R. Ambedkar, M.N. Roy .

10. Western Political Thought: Plato, Aristotle, Machiavelli, Hobbes, Locke, John S. Mill,

Marx, Gramsci, Hannah Arendt.

Indian Government and Politics:

1. Indian Nationalism:

(a) Political Strategies of India’s Freedom Struggle: Constitutionalism to mass

Satyagraha, Non-cooperation, Civil Disobedience; Militant and revolutionary

movements, Peasant and workers’ movements.

(b) Perspectives on Indian National Movement: Liberal, Socialist and Marxist;

Radical humanist and Dalit.

2. Making of the Indian Constitution: Legacies of the British rule; different social and

political perspectives.

3. Salient Features of the Indian Constitution: The Preamble, Fundamental Rights and

Duties, Directive Principles; Parliamentary System and Amendment Procedures;

Judicial Review and Basic Structure doctrine.

4. (a) Principal Organs of the Union Government: Envisaged role and actual working

of the Executive, Legislature and Supreme Court.

(b) Principal Organs of the State Government: Envisaged role and actual working of

the Executive, Legislature and High Courts.

5. Grassroots Democracy: Panchayati Raj and Municipal Government; significance of

73rd and 74th Amendments; Grassroot movements.

[160]

6. Statutory Institutions/Commissions: Election Commission, Comptroller and Auditor

General, Finance Commission, Union Public Service Commission, National

Commission for Scheduled Castes, National Commission for Scheduled Tribes,

National Commission for Women; National Human Rights Commission, National

Commission for Minorities, National Backward Classes Commission.

7. Federalism: Constitutional provisions; changing nature of centre-state relations;

integrationist tendencies and regional aspirations; inter-state disputes.

8. Planning and Economic Development : Nehruvian and Gandhian perspectives; role of

planning and public sector; Green Revolution, land reforms and agrarian relations;

liberalization and economic reforms.

9. Caste, Religion and Ethnicity in Indian Politics.

10. Party System: National and regional political parties, ideological and social bases of

parties; patterns of coalition politics; Pressure groups, trends in electoral behaviour;

changing socio- economic profile of Legislators.

11. Social Movements: Civil liberties and human rights movements; women’s movements;

environmentalist movements.

PAPER – II

Comparative Politics and International Relations

Comparative Political Analysis and International Politics:

1. Comparative Politics: Nature and major approaches; political economy and political

sociology perspectives; limitations of the comparative method.

2. State in comparative perspective: Characteristics and changing nature of the State in

capitalist and socialist economies, and, advanced industrial and developing societies.

3. Politics of Representation and Participation: Political parties, pressure groups and

social movements in advanced industrial and developing societies.

4. Globalisation: Responses from developed and developing societies.

5. Approaches to the Study of International Relations: Idealist, Realist, Marxist,

Functionalist and Systems theory.

6. Key concepts in International Relations: National interest, Security and power;

Balance of power and deterrence; Transnational actors and collective security; World

capitalist economy and globalisation.

7. Changing International Political Order:

(a) Rise of super powers; strategic and ideological Bipolarity, arms race and Cold

War; nuclear threat;

(b) Nonaligned movement: Aims and achievements;

(c) Collapse of the Soviet Union; Unipolarity and American hegemony; relevance of

non-alignment in the contemporary world.

8. Evolution of the International Economic System: From Brettonwoods to WTO;

Socialist economies and the CMEA (Council for Mutual Economic Assistance); Third

[161]

World demand for new international economic order; Globalisation of the world

economy.

9. United Nations: Envisaged role and actual record; specialized UN agencies-aims and

functioning; need for UN reforms.

10. Regionalisation of World Politics: EU, ASEAN, APEC, SAARC, NAFTA.

11. Contemporary Global Concerns: Democracy, human rights, environment, gender

justice, terrorism, nuclear proliferation.

India and the World:

1. Indian Foreign Policy: Determinants of foreign policy; institutions of policy-making;

continuity and change.

2. India’s Contribution to the Non-Alignment Movement: Different phases; current role.

3. India and South Asia:

(a) Regional Co-operation: SAARC – past performance and future prospects.

(b) South Asia as a Free Trade Area.

(c) India’s “Look East” policy.

(d) Impediments to regional co-operation: river water disputes; illegal cross-border

migration; ethnic conflicts and insurgencies; border disputes.

4. India and the Global South: Relations with Africa and Latin America; leadership role

in the demand for NIEO and WTO negotiations.

5. India and the Global Centres of Power: USA, EU, Japan, China and Russia.

6. India and the UN System: Role in UN Peace-keeping; demand for Permanent Seat in

the Security Council.

7. India and the Nuclear Question: Changing perceptions and policy.

8. Recent developments in Indian Foreign policy: India’s position on the recent crisis in

Afghanistan, Iraq and West Asia, growing relations with US and Israel; vision of a new

world order.

[162]

PSYCHOLOGY

PAPER -1

Foundations of Psychology

1. Introduction:

Definition of Psychology; Historical antecedents of Psychology and trends in the 21st

century; Psychology and scientific methods; Psychology in relation to other social

sciences and natural sciences; Application of Psychology to societal problems.

2. Methods of Psychology:

Types of research: Descriptive, evaluative, diagnostic and prognostic; Methods of

Research: Survey, observation, case-study and experiments; Characteristics of

experimental design and non-experimental design, Quasi-experimental designs;

Focussed group discussions, brain storming, grounded theory approach.

3. Research Methods:

Major steps in Psychological research (problem statement, hypothesis formulation,

research designs, sampling, tools of data collection, analysis and interpretation and

report writing) Fundamental versus applied research; Methods of data collection

(interview, observation, questionnaire); Research designs (ex-post facto and

experimental); Application of statistical technique (t - test, two way ANOVA

correlation, regression and factor analysis); Item response theory.

4. Development of Human Behaviour:

Growth and development; Principles of development, Role of genetic and

environmental factors in determining human behaviour; Influence of cultural factors in

socialization; Life span development - Characteristics, development tasks, promoting

psychological well-being across major stages of the life span.

5. Sensation, Attention and Perception:

Sensation: concepts of threshold, absolute and difference thresholds, signal-detection

and vigilance; Factors influencing attention including set and characteristics of

stimulus; Definition and concept of perception, biological factors in perception;

Perceptual organization-influence of past experiences, perceptual defence-factors

influencing space and depth perception, size estimation and perceptual readiness;

The plasticity of perception; Extrasensory perception; Culture and perception,

Subliminal perception.

6. Learning:

Concept and theories of learning (Behaviourists, Gestaltalist and Information

processing models); The Processes of extinction, discrimination and generalization;

Programmed learning, probability learning, self-instructional learning, concepts; Types

and the schedules of reinforcement, escape, avoidance and punishment, modeling

and social learning.

[163]

7. Memory:

Encoding and remembering; Short term memory, Long term memory, Sensory

memory, Iconic memory, Echoic memory: The Multistore model, levels of processing;

Organization and Mnemonic techniques to improve memory; Theories of forgetting:

decay, interference and retrieval failure: Metamemory; Amnesia: Anterograde and retrograde.

8. Thinking and Problem Solving:

Piaget’s theory of cognitive development; Concept formation processes; Information

processing, Reasoning and problem solving, Facilitating and hindering factors in

problem solving, Methods of problem solving: Creative thinking and fostering

creativity; Factors influencing decision making and judgment; Recent trends.

9. Motivation and Emotion:

Psychological and physiological basis of motivation and emotion; Measurement of

motivation and emotion; Effects of motivation and emotion on behaviour; Extrinsic

and intrinsic motivation; Factors influencing intrinsic motivation; Emotional

competence and the related issues.

10. Intelligence and Aptitude:

Concept of intelligence and aptitude, Nature and theories of intelligence - Spearman,

Thurstone, Gullford Vernon, Sternberg and J.P; Das; Emotional Intelligence, Social

intelligence, measurement of intelligence and aptitudes, concept of IQ, deviation IQ,

constancy of IQ; Measurement of multiple intelligence; Fluid intelligence and

crystallized intelligence.

11. Personality:

Definition and concept of personality; Theories of personality (psychoanalytical,

socio-cultural, interpersonal, developmental, humanistic, behaviouristic, trait and type

approaches); Measurement of personality (projective tests, pencil-paper test); The

Indian approach to personality; Training for personality development; Latest approaches like big 5 factor theory; The notion of self in different traditions.

12. Attitudes, Values and Interests:

Definition of attitudes, values and interests; Components of attitudes; Formation and

maintenance of attitudes; Measurement of attitudes, values and interests; Theories

of attitude change; Strategies for fostering values; Formation of stereotypes and

prejudices; Changing others behaviour; Theories of attribution; Recent trends.

13. Language and Communication:

Human language - Properties, structure and linguistic hierarchy, Language

acquisition-predisposition, critical period hypothesis; Theories of language

development - Skinner and Chomsky; Process and types of communication -

effective communication training.

14. Issues and Perspectives in Modern Contemporary Psychology:

Computer application in the psychological laboratory and psychological testing;

Artificial intelligence; Psychocybernetics; Study of consciousness-sleep-wake

schedules; dreams, stimulus deprivation, meditation, hypnotic/drug induced states;

Extrasensory perception; Intersensory perception Simulation studies.

[164]

PAPER - II

Psychology: Issues and Applications

1. Psychological Measurement of Individual Differences:

The nature of individual differences; Characteristics and construction of standardized

psychological tests; Types of psychological tests; Use, misuse and limitation of

psychological tests; Ethical issues in the use of psychological tests.

2. Psychological well being and Mental Disorders:

Concept of health-ill health; Positive health, well being; Causal factors in mental

disorders (Anxiety disorders, mood disorders, schizophrenia and delusional disorders;

personality disorders, substance abuse disorders); Factors influencing positive

health, well being, life style and quality of life; Happiness disposition.

3. Therapeutic Approaches:

Psychodynamic therapies; Behaviour therapies; Client centered therapy; Cognitive

therapies; Indigenous therapies (Yoga, Meditation); Bio-feedback therapy; Prevention

and rehabilitation of the mentally ill; Fostering mental health.

4. Work Psychology and Organisational Behaviour:

Personnel selection and training; Use of psychological tests in the industry; Training

and human resource development; Theories of work motivation – Herzberg, Maslow,

Adam Equity theory, Porter and Lawler, Vroom; Leadership and participatory

management; Advertising and marketing; Stress and its management; Ergonomics;

consumer psychology; Managerial effectiveness; Transformational leadership;

Sensitivity training; Power and politics in organizations.

5. Application of Psychology to Educational Field:

Psychological principles underlying effective teaching-learning process; Learning

styles; Gifted, retarded, learning disabled and their training; Training for improving

memory and better academic achievement; Personality development and value

education, Educational, vocational guidance and career counseling; Use of

psychological tests in educational institutions; Effective strategies in guidance

programmes.

6. Community Psychology:

Definition and concept of community psychology; Use of small groups in social action;

Arousing community consciousness and action for handling social problems; Group

decision making and leadership for social change; Effective strategies for social

change.

7. Rehabilitation Psychology:

Primary, secondary and tertiary prevention programmes-role of psychologists;

Organising of services for rehabilitation of physically, mentally and socially challenged

persons including old persons, Rehabilitation of persons suffering from substance

abuse, juvenile delinquency, criminal behaviour; Rehabilitation of victims of violence,

Rehabilitation of HIV/AIDS victims, the role of social agencies.

[165]

8. Application of Psychology to disadvantaged groups:

The concepts of disadvantaged, deprivation; Social, physical, cultural and economic

consequences of disadvantaged and deprived groups; Educating and motivating the

disadvantaged towards development; Relative and prolonged deprivation.

9. Psychological problems of social integration:

The concept of social integration; The problem of caste, class, religion and language

conflicts and prejudice; Nature and manifestation of prejudice between the in-group

and out-group; Causal factors of social conflicts and prejudices; Psychological

strategies for handling the conflicts and prejudices; Measures to achieve social

integration.

10. Application of Psychology in Information Technology and Mass Media:

The present scenario of information technology and the mass media boom and the

role of psychologists; Selection and training of psychology professionals to work in

the field of IT and mass media; Distance learning through IT and mass media;

Entrepreneurship through e-commerce; Multilevel marketing; Impact of TV and

fostering value through IT and mass media; Psychological consequences of recent

developments in Information Technology.

11. Psychology and Economic development:

Achievement motivation and economic development; Characteristics of

entrepreneurial behaviour; Motivating and training people for entrepreneurship and

economic development; Consumer rights and consumer awareness, Government

policies for promotion of entrepreneurship among youth including women

entrepreneurs.

12. Application of psychology to environment and related fields:

Environmental psychology-effects of noise, pollution and crowding; Population

psychology: psychological consequences of population explosion and high population

density; Motivating for small family norm; Impact of rapid scientific and technological

growth on degradation of environment.

13. Application of psychology in other fields:

(a) Military Psychology

Devising psychological tests for defence personnel for use in selection, Training,

counseling; training psychologists to work with defence personnel in promoting

positive health; Human engineering in defence.

(b) Sports Psychology

Psychological interventions in improving performance of athletes and sports.

Persons participating in Individual and Team Games.

(c) Media influences on pro and antisocial behaviour.

(d) Psychology of terrorism.

14. Psychology of Gender:

Issues of discrimination, Management of diversity; Glass ceiling effect, Self fulfilling

prophesy, Women and Indian society

[166]

PUBLIC ADMINISTRATION

PAPER – I

Administrative Theory

1. Introduction:

Meaning, scope and significance of Public Administration; Wilson’s vision of Public

Administration; Evolution of the discipline and its present status; New Public

Administration; Public Choice approach; Challenges of liberalization, Privatisation,

Globalisation; Good Governance: concept and application; New Public Management.

2. Administrative Thought:

Scientific Management and Scientific Management movement; Classical Theory;

Weber’s bureaucratic model—its critique and post-Weberian Developments; Dynamic

Administration (Mary Parker Follett); Human Relations School (Elton Mayo and

others); Functions of the Executive (C.I. Barnard); Simon’s decision-making theory;

Participative Management (R. Likert, C.Argyris, D.McGregor).

3. Administrative Behaviour:

Process and techniques of decision-making; Communication; Morale; Motivation

Theories—content, process and contemporary; Theories of Leadership: Traditional

and Modern.

4. Organisations:

Theories—systems, contingency; Structure and forms: Ministries and Departments,

Corporations, Companies, Boards and Commissions; Ad hoc and advisory bodies;

Headquarters and Field relationships; Regulatory Authorities; Public-Private

Partnerships.

5. Accountability and control:

Concepts of accountability and control; Legislative, Executive and Judicial control over

administration; Citizen and Administration; Role of media, interest groups, voluntary

organizations; Civil society; Citizen’s Charters; Right to Information; Social audit.

6. Administrative Law:

Meaning, scope and significance; Dicey on Administrative law; Delegated legislation;

Administrative Tribunals.

7. Comparative Public Administration:

Historical and sociological factors affecting administrative systems; Administration

and politics in different countries; Current status of Comparative Public Administration;

Ecology and administration; Riggsian models and their critique.

8. Development Dynamics:

Concept of development; Changing profile of development administration; ‘Anti-

development thesis’; Bureaucracy and development; Strong state versus the market

debate; Impact of liberalisation on administration in developing countries; Women and

development—the self-help group movement.

[167]

9. Personnel Administration:

Importance of human resource development; Recruitment, training, career

advancement, position classification, discipline, performance appraisal, promotion,

pay and service conditions; employer-employee relations, grievance redressal

mechanism; Code of conduct; Administrative ethics.

10. Public Policy:

Models of policy-making and their critique; Processes of conceptualisation, planning,

implementation, monitoring, evaluation and review and their limitations; State theories

and public policy formulation.

11. Techniques of Administrative Improvement:

Organisation and methods, Work study and work management;

e-governance and information technology; Management aid tools like network

analysis, MIS, PERT, CPM.

12. Financial Administration:

Monetary and fiscal policies; Public borrowings and public debt Budgets- types and

forms; Budgetary process; Financial accountability; Accounts and audit.

PAPER - II

Indian Administration :

1. Evolution of Indian Administration:

Kautilya’s Arthashastra; Mughal administration; Legacy of British rule in politics and

administration—Indianization of public services, revenue administration, district

administration, local self-government.

2. Philosophical and Constitutional framework of Government:

Salient features and value premises; Constitutionalism; Political culture; Bureaucracy

and democracy; Bureaucracy and development.

3. Public Sector Undertakings:

Public sector in modern India; Forms of Public Sector Undertakings; Problems of

autonomy, accountability and control; Impact of liberalization and privatization.

4. Union Government and Administration:

Executive, Parliament, Judiciary—structure, functions, work processes; Recent trends;

Intragovernmental relations; Cabinet Secretariat; Prime Minister’s Office; Central

Secretariat; Ministries and Departments; Boards; Commissions; Attached offices;

Field organizations.

5. Plans and Priorities:

Machinery of planning; Role, composition and functions of the Planning Commission

and the National Development Council; ‘Indicative’ planning; Process of plan

formulation at Union and State levels; Constitutional Amendments (1992) and

decentralized planning for economic development and social justice.

6. State Government and Administration:

Union-State administrative, legislative and financial relations; Role of the Finance

Commission; Governor; Chief Minister; Council of Ministers; Chief Secretary; State

Secretariat; Directorates.

[168]

7. District Administration since Independence:

Changing role of the Collector; Union-state-local relations; Imperatives of development

management and law and order administration; District administration and democratic

decentralization.

8. Civil Services:

Constitutional position; Structure, recruitment, training and capacity-building; Good

governance initiatives; Code of conduct and discipline; Staff associations; Political

rights; Grievance redressal mechanism; Civil service neutrality; Civil service activism.

9. Financial Management:

Budget as a political instrument; Parliamentary control of public expenditure; Role of

finance ministry in monetary and fiscal area; Accounting techniques; Audit; Role of

Controller General of Accounts and Comptroller and Auditor General of India.

10. Administrative Reforms since Independence:

Major concerns; Important Committees and Commissions; Reforms in financial

management and human resource development; Problems of implementation.

11. Rural Development:

Institutions and agencies since independence; Rural development programmes: foci

and strategies; Decentralization and Panchayati Raj; 73rd Constitutional amendment.

12. Urban Local Government:

Municipal governance: main features, structures, finance and problem areas; 74th

Constitutional Amendment; Global-local debate; New localism; Development

dynamics, politics and administration with special reference to city management.

13. Law and Order Administration:

British legacy; National Police Commission; Investigative agencies; Role of central

and state agencies including paramilitary forces in maintenance of law and order and

countering insurgency and terrorism; Criminalisation of politics and administration;

Police-public relations; Reforms in Police.

14. Significant issues in Indian Administration :

Values in public service; Regulatory Commissions; National Human Rights

Commission; Problems of administration in coalition regimes; Citizen-administration;

inter—face; Corruption and administration Disaster management.

[169]

SOCIOLOGY

PAPER - I

Fundamentals of Sociology

1. Sociology - The Discipline:

(a) Modernity and social changes in Europe and emergence of sociology.

(b) Scope of the subject and comparison with other social sciences.

(c) Sociology and common sense.

2. Sociology as Science:

(a) Science, scientific method and critique.

(b) Major theoretical strands of research methodology.

(c) Positivism and its critique.

(d) Fact value and objectivity.

(e) Non- positivist methodologies.

3. Research Methods and Analysis:

(a) Qualitative and quantitative methods.

(b) Techniques of data collection.

(c) Variables, sampling, hypothesis, reliability and validity.

4. Sociological Thinkers:

(a) Karl Marx—Historical materialism, mode of production, alienation, class

struggle.

(b) Emile Durkheim—Division of labour, social fact, suicide, religion and society.

(c) Max Weber—Social action, ideal types, authority, bureaucracy, protestant ethic

and the spirit of capitalism.

(d) Talcolt Parsons—Social system, pattern variables.

(e) Robert K. Merton—Latent and manifest functions, conformity and deviance,

reference groups.

(f) Mead—Self and identity.

5. Stratification and Mobility:

(a) Concepts—equality, inequality, hierarchy, exclusion, poverty and deprivation.

(b) Theories of social stratification—Structural functionalist theory, Marxist theory,

Weberian theory.

(c) Dimensions—Social stratification of class, status groups, gender, ethnicity and

race.

(d) Social mobility—open and closed systems, types of mobility, sources and

causes of mobility.

6. Works and Economic Life:

(a) Social organization of work in different types of society- slave society, feudal

society, industrial /capitalist society.

(b) Formal and informal organization of work.

(c) Labour and society.

[170]

7. Politics and Society:

(a) Sociological theories of power.

(b) Power elite, bureaucracy, pressure groups, and political parties.

(c) Nation, state, citizenship, democracy, civil society, ideology.

(d) Protest, agitation, social movements, collective action, revolution.

8. Religion and Society:

(a) Sociological theories of religion.

(b) Types of religious practices: animism, monism, pluralism, sects, cults.

(c) Religion in modern society: religion and science, secularization, religious

revivalism, fundamentalism.

9. Systems of Kinship:

(a) Family, household, marriage.

(b) Types and forms of family.

(c) Lineage and descent

(d) Patriarchy and sexual division of labour.

(e) Contemporary trends.

10. Social Change in Modern Society:

(a) Sociological theories of social change.

(b) Development and dependency.

(c) Agents of social change.

(d) Education and social change.

(e) Science, technology and social change.

PAPER - II

INDIAN SOCIETY : STRUCTURE AND CHANGE

A. Introducing Indian Society:

(i) Perspectives on the study of Indian Society:

(a) Indology (GS. Ghurye).

(b) Structural functionalism (M N Srinivas).

(c) Marxist sociology ( A R Desai).

(ii) Impact of colonial rule on Indian Society :

(a) Social background of Indian nationalism.

(b) Modernization of Indian tradition.

(c) Protests and movements during the colonial period.

(d) Social reforms.

B. Social Structure:

(i) Rural and Agrarian Social Structure:

(a) The idea of Indian village and village studies-

(b) Agrarian social structure - evolution of land tenure system, land reforms.

[171]

(ii) Caste System:

(a) Perspectives on the study of caste systems: GS Ghurye, M N Srinivas, Louis

Dumont, Andre Beteille.

(b) Features of caste system.

(c) Untouchability - forms and perspectives

(iii) Tribal communities in India:

(a) Definitional problems.

(b) Geographical spread.

(c) Colonial policies and tribes.

(d) Issues of integration and autonomy.

(iv) Social Classes in India:

(a) Agrarian class structure.

(b) Industrial class structure.

(c) Middle classes in India.

(v) Systems of Kinship in India:

(a) Lineage and descent in India.

(b) Types of kinship systems.

(c) Family and marriage in India.

(d) Household dimensions of the family.

(e) Patriarchy, entitlements and sexual division of labour.

(vi) Religion and Society:

(a) Religious communities in India.

(b) Problems of religious minorities.

C. Social Changes in India:

(i) Visions of Social Change in India:

(a) Idea of development planning and mixed economy.

(b) Constitution, law and social change.

(c) Education and social change.

(ii) Rural and Agrarian transformation in India :

(a) Programmes of rural development, Comunity Development Programme,

cooperatives, poverty alleviation schemes.

(b) Green revolution and social change.

(c) Changing modes of production in Indian agriculture.

(d) Problems of rural labour, bondage, migration.

(iii) Industrialization and Urbanisation in India :

(a) Evolution of modern industry in India.

(b) Growth of urban settlements in India.

(c) Working class: structure, growth, class mobilization.

(d) Informal sector, child labour.

(e) Slums and deprivation in urban areas.

[172]

(iv) Politics and Society :

(a) Nation, democracy and citizenship.

(b) Political parties, pressure groups, socical and political elite.

(c) Regionalism and decentralization of power.

(d) Secularization.

(v) Social Movements in Modern India :

(a) Peasants and farmers movements.

(b) Women’s movement.

(c) Backward classes & Dalit movement.

(d) Environmental movements.

(e) Ethnicity and Identity movements.

(vi) Population Dynamics :

(a) Population size, growth, composition and distribution.

(b) Components of population growth : birth, death, migration.

(c) Population policy and family planning.

(d) Emerging issues: ageing, sex ratios, child and intant motality, reproductive

health.

(vii) Challenges of Social Transformation :

(a) Crisis of development : displacement, environmental problems and

sustainability.

(b) Poverty, deprivation and inequalities.

(c) Violence against women.

(d) Caste conflicts.

(e) Ethnic conflicts, communalism, religious revivalism.

(f) Illiteracy and disparities in education.

[173]

STATISTICS

PAPER - I

1. Probability :

Sample space and events, probability measure and probability space, random variable as a

measurable function, distribution function of a random variable, discrete and continuous-type

random variable, probability mass function, probability density function, vector-valued random

variable, marginal and conditional distributions, stochastic independence of events and of

random variables, expectation and moments of a random variable, conditional expectation,

convergence of a sequence of random variable in distribution, in probability, in

P-th mean and almost everywhere, their criteria and inter-relations, Chebyshev’s inequality

and Khintchine‘s weak law of large numbers, strong law of large numbers and Kolmogoroff’s

theorems, probability generating function, moment generating function, characteristic function,

inversion theorem, Linderberg and Levy forms of central limit theorem, standard discrete and

continuous probability distributions.

2. Statistical Inference :

Consistency, unbiasedness, efficiency, sufficiency, completeness, ancillary statistics,

factorization theorem, exponential family of distribution and its properties, uniformly minimum

variance unbiased (UMVU) estimation, Rao-Blackwell and Lehmann-Scheffe theorems,

Cramer-Rao inequality for single parameter. Estimation by methods of moments, maximum

likelihood, least squares, minimum chi-square and modified minimum chi-square, properties

of maximum likelihood and other estimators, asymptotic efficiency, prior and posterior

distributions, loss function, risk function, and minimax estimator. Bayes estimators.

Non-randomised and randomised tests, critical function, MP tests, Neyman-Pearson lemma,

UMP tests, monotone likelihood ratio, similar and unbiased tests, UMPU tests for single

parameter likelihood ratio test and its asymptotic distribution. Confidence bounds and its

relation with tests.

Kolmogoroff’s test for goodness of fit and its consistency, sign test and its optimality. Wilcoxon

signed-ranks test and its consistency, Kolmogorov-Smirnov two-sample test, run test,

Wilcoxon-Mann-Whitney test and median test, their consistency and asymptotic normality.

Wald’s SPRT and its properties, OC and ASN functions for tests regarding parameters for

Bernoulli, Poisson, normal and exponential distributions. Wald’s fundamental identity.

3. Linear Inference and Multivariate Analysis :

Linear statistical models’, theory of least squares and analysis of variance, Gauss-Markoff

theory, normal equations, least squares estimates and their precision, test of significance and

interval estimates based on least squares theory in one-way, two-way and three-way

classified data, regression analysis, linear regression, curvilinear regression and orthogonal

polynomials, multiple regression, multiple and partial correlations, estimation of variance and

covariance components, multivariate normal distribution, Mahalanobis-D2 and Hotelling’s T2

statistics and their applications and properties, discriminant analysis, canonical correlations,

principal component analysis.

4. Sampling Theory and Design of Experiments :

An outline of fixed-population and super-population approaches, distinctive features of finite

population sampling, probability sampling designs, simple random sampling with and without

replacement, stratified random sampling, systematic sampling and its efficacy , cluster

[174]

sampling, two-stage and multi-stage sampling, ratio and regression methods of estimation

involving one or more auxiliary variables, two-phase sampling, probability proportional to size

sampling with and without replacement, the Hansen-Hurwitz and the Horvitz-Thompson

estimators, non-negative variance estimation with reference to the Horvitz-Thompson

estimator, non-sampling errors.

Fixed effects model (two-way classification) random and mixed effects models (two-way

classification with equal observation per cell), CRD, RBD, LSD and their analyses, incomplete

block designs, concepts of orthogonality and balance, BIBD, missing plot technique, factorial

experiments and 2n and 32, confounding in factorial experiments, split-plot and simple lattice

designs, transformation of data Duncan’s multiple range test.

PAPER - II

1. Industrial Statistics:

Process and product control, general theory of control charts, different types of control charts

for variables and attributes, X, R, s, p, np and c charts, cumulative sum chart. Single, double,

multiple and sequential sampling plans for attributes, OC, ASN, AOQ and ATI curves,

concepts of producer’s and consumer’s risks, AQL, LTPD and AOQL, Sampling plans for

variables, Use of Dodge-Roming tables.

Concept of reliability, failure rate and reliability functions, reliability of series and parallel

systems and other simple configurations, renewal density and renewal function, Failure

models: exponential, Weibull, normal , lognormal.

Problems in life testing, censored and truncated experiments for exponential models.

2. Optimization Techniques :

Different types of models in Operations Research, their construction and general methods of

solution, simulation and Monte-Carlo methods formulation of linear programming (LP)

problem, simple LP model and its graphical solution, the simplex procedure, the two-phase

method and the M-technique with artificial variables, the duality theory of LP and its economic

interpretation, sensitivity analysis, transportation and assignment problems, rectangular

games, two-person zero-sum games, methods of solution (graphical and algebraic).

Replacement of failing or deteriorating items, group and individual replacement policies,

concept of scientific inventory management and analytical structure of inventory problems,

simple models with deterministic and stochastic demand with and without lead time, storage

models with particular reference to dam type.

Homogeneous discrete-time Markov chains, transition probability matrix, classification of

states and ergodic theorems, homogeneous continuous-time Markov chains, Poisson

process, elements of queuing theory, M/M/1, M/M/K, G/M/1 and M/G/1 queues.

Solution of statistical problems on computers using well-known statistical software packages

like SPSS.

3. Quantitative Economics and Official Statistics:

Determination of trend, seasonal and cyclical components, Box-Jenkins method, tests for

stationary series, ARIMA models and determination of orders of autoregressive and moving

average components, forecasting.

[175]

Commonly used index numbers-Laspeyre’s, Paasche’s and Fisher’s ideal index numbers,

chain-base index number, uses and limitations of index numbers, index number of wholesale

prices, consumer prices, agricultural production and industrial production, test for index

numbers - proportionality, time-reversal, factor-reversal and circular .

General linear model, ordinary least square and generalized least squares methods of

estimation, problem of multicollinearity, consequences and solutions of multicollinearity,

autocorrelation and its consequences, heteroscedasticity of disturbances and its testing, test

for independence of disturbances, concept of structure and model for simultaneous equations,

problem of identification-rank and order conditions of identifiability, two-stage least square

method of estimation.

Present official statistical system in India relating to population, agriculture, industrial

production, trade and prices, methods of collection of official statistics, their reliability and

limitations, principal publications containing such statistics, various official agencies

responsible for data collection and their main funcstions.

4. Demography and Psychometry :

Demographic data from census, registration, NSS other surveys, their limitations and uses,

definition, construction and uses of vital rates and ratios measures of fertility, reproduction

rates, morbidity rate, standardized death rate, complete and abridged life tables, construction

of life tables from vital statistics and census returns, uses of life tables logistic and other

population growth curves, fitting a logistic curve, population projection, stable population,

quasi-stable population, techniques in estimation of demographic parameters, standard

classification by cause of death, health surveys and use of hospital statistics.

Methods of standardisation of scales and tests, Z-scores, standard scores, T-scores,

percentile scores, inteligence quotient and its measurement and uses validity and reliability of

test scores and its determination, use of factor analysis and path analysis in psychometry.

[176]

ZOOLOGY

PAPER – I

1. Non-chordata and Chordata:

(a) Classification and relationship of various phyla up to subclasses: Acoelomate and

Coelomate, Protostomes and Deuterostomes, Bilateria and Radiata; Status of

Protista, Parazoa, Onychophora and Hemichordata; Symmetry.

(b) Protozoa: Locomotion, nutrition, reproduction, sex; General features and life

history of Paramaecium, Monocystis, Plasmodium and Leishmania.

(c) Porifera: Skeleton, canal system and reproduction.

(d) Cnidaria: Polymorphism, defensive structures and their mechanism; coral reefs

and their formation; metagenesis; general features and life history of Obelia and

Aurelia.

(e) Platyhelminthes: Parasitic adaptation; general features and life history of Fasciola

and Taenia and their pathogenic symptoms.

(f) Nemathelminthes: General features, life history, parasitic adaptation of Ascaris

and Wuchereria.

(g) Annelida: Coelom and metamerism; modes of life in polychaetes; general

features and life history of Nereis, earthworm and leach.

(h) Arthropoda: Larval forms and parasitism in Crustacea; vision and respiration in

arthropods (Prawn, cockroach and scorpion); modification of mouth parts in

insects (cockroach, mosquito, housefly, honey bee and butterfly); metamorphosis

in insect and its hormonal regulation, social behaviour of Apis and termites.

(i) Mollusca: Feeding, respiration, locomotion, general features and life history of

Lamellidens, Pila and Sepia, torsion and detorsion in gastropods.

(j) Echinodermata: Feeding, respiration, locomotion, larval forms, general features

and life history of Asterias.

(k) Protochordata: Origin of chordates; general features and life history of

Branchiostoma and Herdmania.

(l) Pisces: Respiration, locomotion and migration.

(m) Amphibia: Origin of tetrapods, parental care, paedomorphosis.

(n) Reptilia; Origin of reptiles, skull types, status of Sphenodon and crocodiles.

(o) Aves: Origin of birds, flight adaptation, migration.

(p) Mammalia: Origin of mammals, dentition, general features of egg laying

mammals, pouched-mammals, aquatic mammals and primates, endocrine glands

(pituitary, thyroid, parathyroid, adrenal, pancreas, gonads) and their inter-

relationships.

(q) Comparative functional anatomy of various systems of vertebrates (integument

and its derivatives, endoskeleton, locomotory organs, digestive system,

respiratory system, circulatory system including heart and aortic arches, urino-

genital system, brain and sense organs (eye and ear).

[177]

2. Ecology:

(a) Biosphere: Concept of biosphere; biomes, Biogeochemical cycles, Human

induced changes in atmosphere including green house effect, ecological

succession, biomes and ecotones, community ecology.

(b) Concept of ecosystem; structure and function of ecosystem, types of ecosystem,

ecological succession, ecological adaptation.

(c) Population; characteristics, population dynamics, population stabilization.

(d) Biodiversity and diversity conservation of natural resources.

(e) Wildlife of India.

(f) Remote sensing for sustainable development.

(g) Environmental biodegradation, pollution and its impact on biosphere and its

prevention.

3. Ethology:

(a) Behaviour: Sensory filtering, reponsiveness, sign stimuli, learning and memory,

instinct, habituation, conditioning, imprinting.

(b) Role of hormones in drive; role of pheromones in alarm spreading; crypsis,

predator detection, predator tactics, social hierarchies in primates, social

organization in insects.

(c) Orientation, navigation, homing, biological rhythms, biological clock, tidal,

seasonal and circadian rhythms.

(d) Methods of studying animal behaviour including sexual conflict, selfishness,

kinship and altruism.

4. Economic Zoology:

(a) Apiculture, sericulture, lac culture, carp culture, pearl culture, prawn culture,

vermiculture.

(b) Major infectious and communicable diseases (malaria, filaria, tuberculosis, cholera

and AIDS) their vectors, pathogens and prevention.

(c) Cattle and livestock diseases, their pathogen (helminthes) and vectors (ticks,

mites, Tabanus, Stomoxys).

(d) Pests of sugar cane (Pyrilla perpusiella) oil seed (Achaea janata) and rice

(Sitophilus oryzae).

(e) Transgenic animals.

(f) Medical biotechnology, human genetic disease and genetic counselling, gene

therapy.

(g) Forensic biotechnology.

5. Biostatistics:

Designing of experiments; null hypothesis; correlation, regression, distribution and

measure of central tendency, chi square, student-test, F-test (one-way & two-way F-

test).

[178]

6. Instrumentation Methods:

(a) Spectrophotometer, phase contrast and fluorescence microscopy, radioactive

tracer, ultra centrifuge, gel electrophoresis, PCR, ELISA, FISH and chromosome

painting.

(b) Electron microscopy (TEM, SEM).

PAPER - II

1. Cell Biology:

(a) Structure and function of cell and its organelles (nucleus, plasma membrane,

mitochondria, Golgi bodies, endoplasmic reticulum, ribosomes, and lysosomes),

cell division (mitosis and meiosis), mitotic spindle and mitotic apparatus,

chromosome movements, chromosome type polytene and lambrush, organization

of chromatin, heterochromatin, Cell cycle regulation.

(b) Nucleic acid topology, DNA motif, DNA replication, transcription, RNA processing,

translation, protein foldings and transport.

2. Genetics:

(a) Modern concept of gene, split gene, genetic regulation, genetic code.

(b) Sex chromosomes and their evolution, sex determination in Drosophila and man.

(c) Mendel’s laws of inheritance, recombination, linkage, multiple alleles, genetics of

blood groups, pedigree analysis, hereditary diseases in man.

(d) Mutations and mutagenesis.

(e) Recombinant DNA technology; plasmid, cosmid, artificial chromosomes as

vectors, transgenic, DNA cloning and whole animal cloning (principles and

methods).

(f) Gene regulation and expression in prokaryotes and eukaryotes.

(g) Signal molecules, cell death, defects in signaling pathway and consequences.

(h) RFLP, RAPD and AFLP and application of RFLP in DNA finger printing, ribozyme

technologies, human genome project, genomics and protomics.

3. Evolution:

(a) Theories of origin of life.

(b) Theories of evolution; Natural selection, role of mutations in evolution,

evolutionary patterns, molecular drive, mimicry variation, isolation and speciation.

(c) Evolution of horse, elephant and man using fossil data.

(d) Hardy-Weinberg Law.

(e) Continental drift and distribution of animals.

[179]

4. Systematics :

Zoological nomenclature, international code, cladistics, molecular taxonomy and

biodiversity.

5. Biochemistry :

(a) Structure and role of carbohydrates, fats, fatty acids and cholesterol, proteins and

amino-acids, nucleic acids. Bioenergetics.

(b) Glycolysis and Kreb cycle, oxidation and reduction, oxidative phosphorylation,

energy conservation and release, ATP cycle, cyclic AMP—its structure and role.

(c) Hormone classification (steroid and peptide hormones), biosynthesis and

functions.

(d) Enzymes : types and mechanisms of action.

(e) Vitamins and co-enzymes.

(f) Immunoglobulin and immunity.

6. Physiology (with special reference to mammals) :

(a) Composition and constituents of blood; blood groups and Rh factor in man, factors

and mechanism of coagulation, iron metabolism, acid-base balance, thermo-

regulation, anticoagulants.

(b) Haemoglobin: Composition, types and role in transport of oxygen and carbon

dioxide.

(c) Digestion and absorption : Role of salivary glands, liver, pancreas and intestinal

glands.

(d) Excretion : nephron and regulation of urine formation; osmo-regulation and

excretory product.

(e) Muscles : Types, mechanism of contraction of skeletal muscles, effects of

exercise on muscles.

(f) Neuron : nerve impulse—its conduction and synaptic transmission,

neurotransmitters.

(g) Vision, hearing and olfaction in man.

(h) Physiology of reproduction, puberty and menopause in human.

7. Developmental Biology :

(a) Gametogenesis; spermatogenesis, composition of semen, in vitro and in vivo

capacitation of mammalian sperm, Oogenesis, totipotency; fertilization,

morphogenesis and morphogen, blastogenesis, establishment of body axes

formation, fate map, gestulation in frog and chick; genes in development in chick,

homeotic genes, development of eye and heart, placenta in mammals.

(b) Cell lineage, cell to cell interaction, Genetic and induced teratogenesis, role of

thyroxine in control of metamorphosis in amphibia, paedogenesis and neoteny;

cell death, aging.

(c) Development genes in man, in vitro fertilization and embryo transfer cloning.

(d) Stem cells : Sources, types and their use in human welfare.

(e) Biogenetic law.

[180]

HINDI

Paper-I

Answers must be written in Hindi

Section-A

1. History of Hindi Language and Nagari Lipi.

I. Grammatical and applied forms of Apbhransh, Awahatta & Arambhik Hindi.

II. Development of Braj and Awadhi as literary language during medieval period.

III. Early form of Khari-boli in Siddha-Nath Sahitya, Khusero, Sant Sahitaya, Rahim etc. and

Dakhni Hindi.

IV. Development of Khari-boli and Nagari Lipi during 19th Century.

V. Standardisation of Hindi Bhasha & Nagari Lipi.

VI. Development of Hindi as national Language during freedom movement.

VII. The development of Hindi as a National Language of Union of India.

VIII. Scientific & Technical development of Hindi Language.

IX. Prominent dialects of Hindi and their inter-relationship.

X. Salient features of Nagari Lipi and the efforts for its reform & Standard form of Hindi.

XI. Grammatical structure of Standard Hindi.

Section-B

2. History of Hindi Literature.

I. The relevance and importance of Hindi literature and tradition of writing History of Hindi

Literature.

II. Literary trends of the following four periods of history of Hindi Literature.

A : Adikal-Sidh, Nath and Raso Sahitya.

Prominent poets-Chandvardai, Khusaro, Hemchandra, Vidyapati.

B: Bhaktikal-Sant Kavyadhara, Sufi Kavyadhara, Krishna Bhaktidhara and Ram

Bhaktidhara.

Prominent Poets-Kabir, Jayasi, Sur & Tulsi.

C: Ritikal-Ritikavya, Ritibaddhakavya & Riti Mukta Kavya.

Prominent Poets-Keshav, Bihari, Padmakar and Ghananand.

D: Adhunik Kal

[181]

a. Renaissance, the development of Prose, Bharatendu Mandal.

b. Prominent Writers : Bharatendu, Bal Krishna Bhatt & Pratap Narain Mishra.

c. Prominent trends of modern Hindi Poetry : Chhayavad, Pragativad,

Proyogvad, Nai Kavita, Navgeet and Contemporary poetry and Janvadi

Kavita.

Prominent Poets : Maithili Sharan Gupta, Prasad, Nirala, Mahadevi, Dinkar, Agyeya,

Muktibodh, Nagarjun.

III. Katha Sahitya :

A. Upanyas & Realism

B. The origin and development of Hindi Novels.

C. Prominent Novelists : Premchand, Jainendra, Yashpal, Renu and Bhism Sahani.

D. The origin and development of Hindi short story.

E. Prominent Short Story Writers : Premchand, Prasad, Agyeya, Mohan Rakesh &

Krishna Shobti.

IV. Drama & Theatre :

A. The origin & Development of Hindi Drama.

B. Prominent Dramatists : Bharatendu, Prasad, Jagdish Chandra Mathur, Ram Kumar Verma, Mohan Rakesh.

C. The development of Hindi Theatre.

V. Criticism :

A. The origin and development of Hindi criticism : Saiddhantik, Vyavharik, Pragativadi, Manovishleshanvadi & Nai Alochana.

B. Prominent critics : Ramchandra Shukla, Hajari Prasad Dwivedi, Ram Vilas Sharma & Nagendra.

VI. The other forms of Hindi prose-Lalit Nibandh, Rekhachitra, Sansmaran, Yatra vrittant.

PAPER-II

Answers must be written in Hindi

This paper will require first hand reading of prescribed texts and will test the critical ability of

the candidates.

Section-A

1. Kabir : Kabir Granthawali, Ed, Shyam Sundar Das

(First hundred Sakhis)

2. Surdas : Bhramar Gitsar, Ed. Ramchandra Shukla (First hundred

Padas)

3. Tulsidas : Ramchrit Manas (Sundar Kand) Kavitawali (Uttar Kand)

[182]

4. Jayasi : Padmawat, Ed. Shyam Sundar Das (Sinhal Dwip Khand

& Nagmativiyog Khand)

5. Bihari : Bihari Ratnakar, Ed. Jagnnath Prasad Ratnakar

(First 100 Dohas)

6. Maithili Sharan Gupta : Bharat Bharati

7. Prasad : Kamayani (Chinta and Sharddha Sarg)

8. Nirala : Rag-Virag, Ed. Ram Vilas Sharma (Ram Ki Shakti Puja

& Kukurmutta).

9. Dinkar : Kurushetra

10. Agyeya : Angan Ke Par Dwar (Asadhya Vina)

11. Muktiboth : Brahma Rakshas

12. Nagarjun : Badal Ko Ghirte Dekha Hai, Akal Ke Bad, Harijan Gatha.

Section-B

1. Bharatendu : Bharat Durdasha

2. Mohan Rakesh : Ashad Ka Ek Din

3. Ramchandra Shukla : Chintamani (Part I) (Kavita Kya Hai) Shraddha Aur Bhakti)

4. Dr. Satyendra : Nibandh Nilaya-Bal Krishna Bhatt, Premchand, Gulab Rai,

Hajari Prasad Dwivedi, Ram Vilas Sharma, Agyeya, Kuber

Nath Rai.

5. Premchand : Godan, Premchand ki Sarvashreshtha Kahaniyan, Ed. Amrit

Rai/Manjusha Prem Chand ki Sarvashreshtha Kahaniyan,

Ed. Amrit Rai

6. Prasad : Skandgupta

7. Yashpal : Divya

8. Phaniswar Nath Renu : Maila Anchal

9. Mannu Bhandari : Mahabhoj

10. Rajendra Yadav : Ek Dunia Samanantar (All Stories)

[183]

PUNJABI

Paper-I

Answers must be written in Punjabi in Gurmukhi Script

Section-A

(a) Origin of Punjabi language : different stages of development and recent development

in Punjabi language : characteristics of Punjabi phonology and the study of its tones:

classification of vowels and consonants.

(b) Punjabi morphology : the number-gender system (animate and inanimate), prefixes,

affixes and different categories of Post positions: Punjabi word formation: Tatsam.

Tad Bhav, forms: Sentence structure, the notion of subject and object in Punjabi:

Noun and verb phrases.

(c) Language and dialect; the notions of dialect and idiolect; major dialects of Punjabi;

Pothohari, Majhi, Doabi, Malwai, Puadhi; the validity of speech variation on the basis

of social stratification, the distinctive features of various dialects with special reference

to tones. Language and script; origin and development of Gurmukhi; suitability of

Gurmukhi for Punjabi.

(d) Classical background; Nath Jogi Sahit Medieval literature : Gurmat, Sufti, Kissa and

Var Janamsakhis.

Section-B

(a) Modern trends Mystic, romantic, progressive and neomystic (Vir Singh, Puran Singh,

Mohan Singh, Amrita Pritam, Bawa Balwant, Pritam Singh Safeer, J.S. Neki).

Experimentalist (Jasbir Singh Ahluwalia, Ravinder Ravi, Ajaib Kamal)

Aesthetes (Harbhajan Singh, Tara Singh)

Neo-progressive (Pash. Jagtar, Patar)

Origin and Development of Genres :

(b) Folk literature Folk songs, Folk tales. Riddles, Proverbs.

Epic (Vir Singh, Avtar Singh, Azad Mohan Singh)

Lyric (Gurus, Sufis and Modern Lyricists—Mohan Singh Amrita Pritam, Shiv Kumar,

Harbhajan Singh)

(c) Drama (I.C. Nanda, Harcharan Singh, Balwant Gargi, S.S.Sekhon, Charan Das Sidhu)

Novel (Vir Singh, Nanak Singh, Jaswant Singh Kanwal, K.S. Duggal, Sukhbir, Gurdial

Singh, Dalip Kaur Tiwana, Swaran Chandan)

Short Story (Sujan Singh, K.S. Virk, Prem Parkash, Waryam Sandhu).

(d) Socio-cultural Sanskrit, Persian Literary influences : and Western.

Essay (Puran Singh, Teja Singh, Gurbaksh Singh)

Literary Criticism (S.S. Sekhon, Attar Singh, Kishan Singh, Harbhajan Singh, Najam

Hussain Sayyad).

[184]

Paper-II

Answers must be written in Punjabi in Gurumukhi Script.

This paper will require first-hand reading of the texts prescribed and will be designed to test

the candidate’s critical ability.

Section-A

(a) Sheikh Farid The complete Bani as included in the Adi Granth.

(b) Guru Nanak Japu Ji Baramah, Asa di Var

(c) Bulleh Shah Kafian

(d) Waris Shah Heer

Section-B

(a) Shah Mohammad Jangnama (Jang Singhan te Firangian)

Dhani Ram Chatrik (Poet) Chandan Vari

Sufi Khana

Nawan Jahan

(b) Nanak Singh (Novelist) Chitta Lahu

Pavittar Papi

Ek Mian Do Talwaran

(c) Gurbaksh Singh (Essayist) Zindagi di Ras

Nawan Shivala

Merian Abhul Yadaan.

Balraj Sahni (Travelogue) Mera Roosi Safarnama

Mera Pakistani Safarnama

(d) Balwant Gargi (Dramatist) Loha Kutt

Dhuni-di-Agg

Sultan Razia

Sant Singh Sekhon (Critic) Sahityarth

Parsidh Punjabi Kavi

Punjabi Kav Shiromani

[185]

SANSKRIT

Paper-I

There will be three questions as indicated in the question paper which must be answered in

Sanskrit. The remaining questions must be answered either in Sanskrit or in the medium of

examination opted by the candidate.

Section-A

1. Significant features of the grammar, with particular stress on Sanjna, Sandhi, Karaka,

Samasa, Kartari and Karmani vacyas (voice usages) (to be answered in Sanskrit).

2. (a) Main characteristics of Vedic Sanskrit language.

(b) Prominent features of classical Sanskrit language.

(c) Contribution of Sanskrit to linguistic studies.

3. General Knowledge of:-

(a) Literary history of Sanskrit,

(b) Principal trends of literary criticism

(c) Ramayana,

(d) Mahabharata

(e) The origin and development of literary geners of :

Mahakavya

Rupaka (drama)

Katha

Akhyayika

Campu

Khandakavya

Muktaka Kavya.

Section-B

4. Essentials of Indian Culture with stress on

(a) Purusarthas-

(b) Samskaras-

(c) Varnasramavyavastha

(d) Arts and fine arts

(e) Technical sciences

5. Trends of Indian Philosophy

(a) Mimansa

(b) Vedanta

(c) Nyaya

[186]

(d) Vaisesika

(e) Sankhya

(f) Yoga

(g) Bauddha

(h) Jaina

(i) Carvaka

6. Short Essay in Sanskrit.

7. Unseen passage with the questions, to be answered in Sanskrit.

Paper-II

Question from Group 4 is to be answered in Sanskrit only. Question from Groups 1, 2

and 3 are to be answered either in Sanskrit or in the medium opted by the candidate.

Section-A

General study of the following groups:-

Group 1

(a) Raghuvamsam-Kalidasa

(b) Kumarasambhavam-Kalidasa

(c) Kiratarjuniyam-Bharavi

(d) Sisupalavadham-Magha

(e) Naisadhiyacaritam-Sriharsa

(f) Kadambari-Banabhatta

(g) Dasakumaracaritam -Dandin

(h) Sivarajyodayam-S.B. Varnekar

Group 2

(a) Isavasyopanisad

(b) Bhagavadgita

(c) Sundarakanda of Valmiki’s Ramayana

(d) Arthasastra of Kautilya

Group 3

(a) Svapnavasavadattam- Bhasa

(b) Abhijnanasakuntalam- Kalidasa

(c) Mrcchakatikam-Sudraka

(d) Mudraraksasam-Visakhadatta

(e) Uttararamacaritam- Bhavabhuti

(f) Ratnavali-Sriharshavardhana

(g) Venisamharam- Bhattanarayana

[187]

Group 4 Short notes in Sanskrit on the following:—

(a) Meghadutam-Kalidasa

(b) Nitisatakam-Bhartrhari

(c) Panchtantra-

(d) Rajatarangini-Kalhana

(e) Harsacaritam-Banabhatta

(f) Amarukasatakam-Amaruka

(g) Gitagovindam-Jayadeva

Section-B

Questions from Groups 1 & 2 are to be answered in Sanskrit only. (Questions from

Groups 3 & 4 are to be answered in Sanskrit or in the medium opted by the candidate).

This Section will require first hand reading of the following selected texts :—

Group 1

(a) Raghuvansam-Canto I, Verses 1 to 10

(b) Kumarasambhavam-Canto I, Verses 1 to 10

(c) Kiratarjuniyam-Canto I, Verses 1 to 10

Group 2

(a) Isavasyopanisad-verses-1, 2, 4, 6, 7, 15 and 18

(b) Bhagavatgita II chapter verses 13 to 25

(c) Sundarakandam of Valmiki Canto 15, Verses 15 to 30 (Geeta Press Edition)

Group 3

(a) Meghadutam-verses 1 to 10

(b) Nitisatakam-Verses 1 to 10 (Edited by D.D. Kosambi Bharatiya Vidya Bhavan

Publication)

(c) Kadambari-Sukanaso-padesa (only)

Group 4

(a) Svapnavasavadattam Act VI

(b) Abhijnansakuntalam Act IV verses 15 to 30

(M.R. Kale Edition)

(c) Uttararamacaritam Act 1 verses 31 to 47

(M.R. Kale Edition)

[188]

URDU

PAPER-I

Answers must be written in Urdu.

Section-A

Development of Urdu Language :

(a) Development of Indo-Aryan (i) Old Indo-Aryan (ii) Middle Indo-Aryan (iii) New Indo-

Aryan

(b) Western Hindi and its dialects Brij Bhasha Khadi Boli, Haryanavi Kannauji, Bundeli-

Theories about the origin of Urdu Language

(c) Dakhani Urdu-Origin and development, its significant linguistic features.

(d) Social and Cultural roots of Urdu language-and its distinctive features.

Script, Phonology, Morphology, Vocabulary.

Section-B

(a) Genres and their development :

(i) Poetry : Ghazal, Masnavi, Qasida, Marsia, Rubai, Jadid Nazm

(ii) Prose : Novel, Short Story, Dastan, Drama, Inshaiya, Khutoot, Biography.

(b) Significant features of : (i) Deccani, Delhi and Lucknow Schools (ii) Sir Syed movement,

Romantic movement, Progressive movement, Modernism.

(c) Literary Criticism and its development with reference to Hali, Shibli, Kaleemuddin

Ahmad, Ehtisham Hussain, Ale-Ahmad Suroor.

(d) Essay writing (covering literary and imaginative topics)

PAPER-II

Answers must be written in Urdu

This paper will require first hand reading of the texts prescribed and will be designed to test

the candidate’s critical ability.

Section-A

1. Mir Amman Bagho-Babar

2. Ghalib Intikhab-e-Khutoot-e-Ghalib

3. Mohd. Husain Azad Nairang-e-Khayal

4. Prem Chand Godan

5. Rajendra Singh Bedi Apne Dukh Mujhe Dedo

6. Abul Kalam Azad Ghubar-e-Khatir

[189]

Section-B

1. Mir Intikhab-e-Kalam-e-Mir

(Ed. Abdul Haq.)

2. Mir Hasan Sahrul Bayan

3. Ghalib Diwan-e-Ghalib

4. Iqbal Bal-e-Jibrail

5. Firaq Gul-e-Naghma

6. Faiz Dast-e-Saba

7. Akhtruliman Bint-e-Lamhat

[190]

ENGLISH

The syllabus consists of two papers, designed to test a first-hand and critical reading of texts

prescribed from the following periods in English Literature : Paper I : 1600–1900 and Paper II

: 1900–1990.

There will be two compulsory questions in each paper : (a) A short-notes question related to

the topics for general study : and (b) A critical analysis of UNSEEN passages both in prose

and verse.

PAPER-I

Answers must be written in English.

Texts for detailed study are listed below. Candidates will also be required to show

adequate knowledge of the following topics and movements :

The Renaissance : Elizabethan and Jacobean Drama; Metaphysical Poetry; The Epic and the

Mock-epic; Neo-classicism; Satire; The Romantic Movement; The Rise of the Novel; The

Victorian Age.

Section-A

1. William Shakespeare : King Lear and The Tempest.

2. John Donne. The following Poems :

- Canonization;

- Death be not proud;

- The Good Morrow;

- On his Mistress going to bed;

- The Relic;

3. John Milton : Paradise Lost, I, II, IV, IX

4. Alexander Pope. The Rape of the Lock.

5. William Wordsworth. The following poems:

- Ode on Intimations of Immortality.

- Tintern Abbey.

- Three years she grew.

- She dwelt among untrodden ways.

- Michael.

- Resolution and Independence.

- The World is too much with us.

- Milton, thou shouldst be living at this hour.

- Upon Westminster Bridge.

6. Alfred Tennyson : In Memoriam.

7. Henrik Ibsen : A Doll’s House.

[191]

Section-B

1. Jonathan Swift. Gulliver’s Travels.

2. Jane Austen. Pride and Prejudice.

3. Henry Fielding. Tom Jones.

4. Charles Dickens. Hard Times.

5. George Eliot. The Mill on the Floss.

6. Thomas Hardy. Tess of the d’Urbervilles.

7. Mark Twain. The Adventures of Huckleberry Finn.

PAPER-II

Answers must be written in English.

Texts for detailed study are listed below. Candidates will also be required to show adequate knowledge of the following topics and movements :

Modernism; Poets of the Thirties; The stream-of-consciousness Novel; Absurd Drama; Colonialism and Post-Colonialism; Indian Writing in English; Marxist, Psychoanalytical and Feminist approaches to literature; Post-Modernism.

Section-A

1. William Butler Yeats. The following poems:

- Easter 1916

- The Second Coming

- A Prayer for my daughter.

- Sailing to Byzantium.

- The Tower.

- Among School Children.

- Leda and the Swan.

- Meru

- Lapis Lazuli

- The Second Coming

- Byzantium.

2. T. S. Ellot. The following poems :

- The Love Song of J.Alfred Prufrock

- Journey of the Magi.

- Burnt Norton.

3. W. H. Auden. The following poems :

- Partition

- Musee des Beaux Arts

[192]

- In Memory of W.B. Yeats

- Lay your sleeping head, my love

- The Unknown Citizen

- Consider

- Mundus Et Infans

- The Shield of Achilles

- September 1, 1939

- Petition.

4. John Osborne : Look Back in Anger.

5. Samuel Beckett. Waiting for Godot.

6. Philip Larkin. The following poems :

- Next

- Please

- Deceptions

- Afternoons

- Days

- Mr. Bleaney

7. A.K. Ramanujan. The following poems :

- Looking for a Causim on a Swing

- A River

- Of Mothers, among other Things

- Love Poem for a Wife 1

- Small-Scale Reflections on a Great House

- Obituary

(All these poems are available in the anthology Ten Twentieth Century Indian Poets, edited by

R. Parthasarthy, published by Oxford University Press, New Delhi).

Section-B

1. Joseph Conrad. Lord Jim

2. James Joyce. Portrait of the Artist as a Young Man.

3. D.H. Lawrence. Sons and Lovers.

4. E.M. Forster. A Passage to India.

5. Virginia Woolf. Mrs Dalloway.

6. Raja Rao. Kanthapura.

7. V.S. Naipal. A House for Mr. Biswas.

[193]

DEFINITIONS

1. BACKWARD CLASSES (PUNJAB)

i) The candidates desiring to be considered for the Backward Classes category are required to submit a certificate as per Punjab Government letter No.1/41/93.RCI/459 dated 17/1/1994, No. 1/41/93RC-1/1597, dated 17-8-2005 and No.1/41/93 RCI/209, dated 24.2.2009 in the prescribed proforma attached herewith.

ii) The BC Certificate in proforma other than the prescribed proforma attached herewith and older than one year as on the last date of receiving Application Form will not be accepted and the candidate will be treated as General Category candidate subject to all criteria applied for the General Category candidates and submission of balance fee amount to the Commission by the date fixed by the Commission. Failing so will result into cancellation of the candidature of the applicant.

iii) The Competent Authorities to issue the necessary certificate are:

1. Deputy Commissioner

2. Additional Deputy Commissioner

3. Sub-Divisional Magistrate

4. Executive Magistrate (PCS Officers only)

5. Tehsildar

2. SON/DAUGHTER/GRAND SON/GRAND DAUGHTER OF FREEDOM FIGHTERS (PUNJAB)

i) Candidates claiming to be son/grandson/daughter/grand daughter of Freedom Fighters are required to submit a certificate issued by the competent authority (i.e., Deputy Commissioner of the district concerned) as per Punjab Government Instructions No.9 (13) 3P-II-84/5822 dated 4/4/1985, No.7(135)-8P-II-83/10120,dated 19.6.91 and No.4-13-8 P-11-97/10112 dated 22/8/1997.

ii) Only those Freedom Fighters and their son/daughter/grand-son/grand-daughter are eligible for consideration for reservation under this category who:

1. belong to the State of Punjab; and

2. have either been granted a Freedom Fighter pension by the Punjab Government or have been awarded Tamra Patra by the Government of India; or

3. are otherwise eligible for the grant of Freedom Fighter pension and Tamra Patra but for any reason whatsoever did not apply for Freedom Fighter pension and Tamra Patra but can obtain Freedom Fighter/ son/daughter/grand-son/grand-daughter of Freedom Fighter certificate from the General Administration (Political wing) of the Punjab Government.

3. EX-SERVICEMEN (PUNJAB)

i) "Ex-serviceman" means a person who has served in any rank, whether as a combatant or a non-combatant, in the Naval, Military and Air Forces of the Union of India (here-in-after referred to as the Armed forces of the Union of India), and who has:

[194]

1. retired or released from such service at his or her own request after earning his or her pension; or

2. been released from such service on medical grounds attributable to military service or circumstances beyond his control and awarded medical or other disability pension; or

3. been released otherwise than on his own request from such service as a result of reduction in establishment; or

4. been released from such service after completing the specific period of engagement otherwise than at his own request or by way of dismissal or discharge on account of misconduct or inefficiency and has been given a gratuity;

(ii) "but does not include a person who has served in the Defence Security Corps, the General Reserve Engineering Force, the Lok Sahayak Sena and the Para -Military Forces, but includes personnel of the Lok Sahayak Sena of the following categories namely:

1. Pension holders for continuous embodied service

2. Persons with disability attributable to military service; and

3. Gallantry award winners

(iii) Ex-servicemen should be of Punjab domicile and they should submit a Domicile Certificate from the competent authority. Failing so they will be considered as General Category Candidates subject to the criteria applied for the General Category Candidates and submission of balance fee amount latest by the date to be fixed by the Commission. Failing so would result in cancellation of their candidature.

(iv) The persons serving in the Armed Forces of the Union, who on retirement from service would come under the category of "Ex-servicemen”, may be permitted to apply for re-employment one year before the completion of specified terms of engagement and avail themselves of all concessions available to Ex-servicemen but shall not be permitted to leave the uniform until they complete the specified terms of engagement in the Armed Forces of the Union.

4. SPORTS PERSON (PUNJAB)

A candidate can claim reservation under the Sports Person category only if:

(i) he belongs to State of Punjab; and

1) he has won National Championship in team or individual events while representing the State of Punjab in such sports events as have been conducted by such respective National Federations as are affiliated to the Indian Olympic Association ; or

2) he has won National Championship in team or individual events which are organized by the Indian Olympic Association; or

3) he has won first, second or third position in team or individual events and/or he has won Gold or Silver or Bronze Medal, at International Sports meets, conducted by International Federations affiliated to the International Olympic Committee or by the International Olympic Committee itself.

[195]

(ii) If candidate belongs to Sports Person, Punjab Category, an attested copy of Gradation Certificate strictly in accordance with the Punjab Sportsman Rules, 1988 issued by the competent authority should be attached with the application form.

(iii) Director Sports, Punjab is the competent authority to issue Sports Gradation Certificate and any other Sports Certificate issued by any other authority will not be accepted a valid Certificate for claim of reservation under the Sports Person, Punjab Category.

(iv) Applicants claiming reservation under Sports Person, Punjab Category must submit Domicile Certificate from the competent authority. Failing so they will be considered as General Category candidates.

5. SCHEDULED CASTE/SCHEDULED TRIBES

The competent authorities for issuing Scheduled Castes/Scheduled Tribes certificates are:

i) District Magistrate/Additional District Magistrate/ Collector/Deputy Commissioner/ Additional Deputy Commissioner/ Deputy Collector/ Ist Class Stipendiary Magistrate/ City Magistrate/ Sub Divisional Magistrate/ Taluka Magistrate/ Executive Magistrate/Extra Assistant Commissioner (Not below the rank of Ist Class Stipendiary Magistrate);

ii) Chief Presidency Magistrate/Additional Chief Presidency Magistrate/ Presidency Magistrate;

iii) Revenue Officer not below the rank of Tehsildar;

iv) Sub Divisional Officer (C) of the area where the candidate and or his family formally resides;

v) Administrator/Secretary to Administrator/Development Officer Lakshdeep Islands;

vi) As per para-3 of Punjab Govt. Instructions No. 1/8/2007-RC-1/815, dated 10th July, 2008, Head of Department or Head of Offices are competent to issue Scheduled Castes Certificates to those applicants whose parents are serving or residing in Chandigarh/Mohali on the basis of their parents service record.

6. LINEAL DESCENDENT OF EX-SERVICEMEN (PUNJAB)

1. Where an Ex-serviceman is not available for recruitment against a reserved category, such a vacancy shall be reserved to be filled in by recruitment of either the wife or one descendent child of an Ex-serviceman.

2. As per Punjab Government notification No.GSR9/Const./ Art309, 234 and 318/Amd(5)/2003 dated 06/11/2002 and letter No. 1/28/92-3ET/2805 dated 14/05/2003

3. “Lineal Descendent” means sons/daughters (married/un-married/widowed legally divorced) of the re-employed/ unemployed Ex-Serviceman.

iii) “Wife” shall include the widow of an Ex-serviceman, provided she has not re-married up to the date of the issue of the appointment letter.”

[196]

iv) In any case, including the case where the Ex-Serviceman has died, his sons/daughters shall be treated as “Lineal descendent” only if a certificate to this effect has been issued by the authority appointed by the Government.

7. WIDOWS AND CERTAIN OTHER CATEGORIES OF WOMEN

v) Widows;

vi) Women who are legally separated from their husbands or have been divorced;

vii) Women whose husbands have been ordered by Civil or Criminal Courts to pay maintenance to them;

viii) Women whose husbands have remarried; and

ix) Wives of serving military personnel or those who are disabled while in military service.

8. PHYSICALLY HANDICAPPED

1. The definitions as per Government Instructions issued vide letter No. 10/26/95/5-SS/1252, dated 2-5-97 of the handicapped for purposes of reservation in employment is as under:

i) The orthopaedically handicapped are those who have a physical defect or deformity not less than 40 % which causes interference with the normal functioning of the bones.

2. Competent authorities to issue such certificate as under:-

(i) Principal Medical Officer

(ii) Chief Medical Officer

(iii) Civil Surgeon

(iv) Class-I Medical Officer of any Government Medical Institution

4. This certificate should be issued by the authorities of the concerned District or place of which the candidate is permanent resident.

9. PUNJAB GOVERNMENT EMPLOYEE

A Punjab Government servant, including that of a Court, who has not less than four years continues service under the Government on the last date fixed by the Commission for the submission of applications, shall be eligible to appear in the examination if he possesses at least a bachelor's degree of a recognised University in any discipline from a recognised university and has not attained the age of 45 years subject to the conditions that he has not availed three chances in addition to those which he might have already availed of in any other capacity.

***

[197]

10. SPECIMEN OF RESERVE CATEGORIES CERTIFICATES

FORM OF CASTE CERTIFICATE

1. This is to certify that Shri/Shrimati/Kumari____________________________

son/daughter of Shri__________________________________ of village/Town

_________________________in District/Division _______________________

State of __________________ belongs to ________________ Caste/Tribe,

which has been recognised as a Scheduled Caste/Scheduled Tribe as per

“The Constitution (Scheduled Castes) Order, 1950”.

2. Shri/Shrimati/Kumari__________________________________ and/or/his/her

family ordinarily resides in village/town______________________________

of District/Division __________________________of the State of

______________.

Signature _____________________

Designation _________________

(With Seal of office)

__________________

Place:

State:

Date:

* Please score out whichever is not applicable.

Note: The word 'ordinarily resides' here will have the same meaning as is given in Section 20 of the Representation of People Act, 1950.

[198]

Form of certificate to be submitted by a candidate belonging to a Backward Class in support of his/her claim

FORM OF CERTIFICATE OF BACKWARD CLASS

1. This is to certify that Shri/Shrimati/Kumari __________________________

son/daughter of Shri _________________________________ of village/Town

_______________________ in District/Division _______________________

of the State of Punjab belongs to the _____________________ Caste, which

is recognised as a Backward Class in terms of Punjab Government letter No.

____________dated ______________.

2. This is also certified that he/she does not belong to any category of

persons/sections mentioned in column 3 of the schedule to Punjab

Government, Department of Welfare letter No.1/41/93-RCI/459 dated 17-01-

1994, No. 1/41/93-RCI/1597 dated 17/08/2005 & No. 1/41/93-RCI/209, dated

24/02/2009.

3. Shri/Shrimati/Kumari_____________________________________and/or/his/

her family ordinarily reside(s) in village/town __________________________

of District/Division ____________________ of the State of Punjab.

Signature _________________________

Designation _________________________

(Seal of the officer concerned) ______________

Place:

State:

Date:

[199]

Form of certificate to be submitted by a candidate who is a lineal descendent of an ex-serviceman in support of his/her claim

LINEAL DESCENDENT CERTIFICATE

(As per Punjab Government Notification No. G.S.R.9/Const/Art. 309, 234 and 318/Amd (5)/2003 dated 6 Nov 2002 and letter No. 15/7/92-4DW/Part 11/2056 dated 30 Apr 2003)

Certified that Sh/Smt/Miss __________________________________________is

a Lineal Descendent/ Wife of No. ___________________________________

Rank_________________Name_____________________________ who is an

Ex-Serviceman as per Identity Card No. __________________ issued by District

Sainik Welfare Officer ___________________________________________and

residing at Village/Town _____________________________________________

PO________________District________________________.

2. This certificate is issued to Sh./Smt/Miss ________________________whose

date of birth is ____________________________ strictly for the purpose of:

*(a) employment for the post of______________________________in the

office of________________________________

*(b) admission for (name of the class/course)

________________________in____________________ (name of the

educational Institution).

*(Strikeout whichever is not applicable)

District Sainik Welfare Officer

No.: _____________

Place: _____________

Date: _____________

[200]

[201]

[202]