I8320 Flash Tutorial English

SAMSUNG Proprietary-Contents may change without notice

2. Specification

This Document can not be used without Samsung's authorization

2-1

GSM 850 EGSM 900 DCS 1800 PCS 1900 WCDMA 900 WCDMA 2100

Freq.Band[MHz]

Upl ink/Downl ink

824~849869~894

880~915925~960

1710~17851805~1880

1850~19101930~1990

882.4~912.6927.4~975.6

1920~19802110~2170

ARFCN range 128~2510~124 &

975~1023512~885 512~810

UL:2712~2863DL:2937~3088

UL:9612~9888DL:10562~10838

Tx/Rxspacing 45 MHz 45MHz 90MHz 80MHz 45MH 190MHz

Mod. Bi trate/

Bi t Per iod

270.833kbps3.692us

270.833kbps3.692us

270.833kbps3.692us

270.833kbps3.692us

3.84Mcps(chip rate)

3.84Mcps(chip rate)

Time SlotPer iod/

Frame Period

576.9us4.615ms

576.9us4.615ms

576.9us4.615ms

576.9us4.615ms

Frame length :10ms

Slot length :0.667ms

Frame length :10ms

Slot length :0.667ms

Modulat ion 0.3GMSK 0.3GMSK 0.3GMSK 0.3GMSKQPSKHPSK

QPSKHPSK

MS Power 33dBm~5dBm 33dBm~5dBm 30dBm~0dBm 30dBm~0dBm 24dBm~-50dBm 24dBm~-50dBm

Power Class 4(max +33dBm)

4(max +33dBm)

1(max +30dBm)

1(max +30dBm)

3(max +24dBm)

3(max +24dBm)

Sensit iv i ty -102dBm -102dBm -100dBm -100dBm -104.7dBm -106.7dBm

TDMA Mux 8 8 8 8 - -

Cel l Radius 35Km 35Km 2Km 2Km 2Km 2Km

2-1. GSM General Specification

SAMSUNG Proprietary-Contents may change without noticeThis Document can not be used without Samsung's authorization

Specification

2-2

TX Powercontrol level

PCS1900

0 30±3 dBm

1 28±3 dBm

2 26±3 dBm

3 24±3 dBm

4 22±3 dBm

5 20±3 dBm

6 18±3 dBm

7 16±3 dBm

8 14±3 dBm

9 12±4 dBm

10 10±4 dBm

11 8±4 dBm

12 6±4 dBm

13 4±4 dBm

14 2±5 dBm

15 0±5 dBm


GSM850GSM900

5 33±2 dBm

6 31±2 dBm

7 29±2 dBm

8 27±2 dBm

9 25±2 dBm

10 23±2 dBm

11 21±2 dBm

12 19±2 dBm

13 17±2 dBm

14 15±2 dBm

15 13±2 dBm

16 11±3 dBm

17 9±3 dBm

18 7±3 dBm

19 5±3 dBm


DCS1800

0 30±3 dBm

1 28±3 dBm

2 26±3 dBm

3 24±3 dBm

4 22±3 dBm

5 20±3 dBm

6 18±3 dBm

7 16±3 dBm

8 14±3 dBm

9 12±4 dBm

10 10±4 dBm

11 8±4 dBm

12 6±4 dBm

13 4±4 dBm

14 2±5 dBm

15 0±5 dBm

2-2. GSM TX power class


3. Product Function

3-1


Main Function

• HSUPA 5.76Mbps / HSDPA 7.2MBps / Quad(850/900/1800/1900) , UMTS (2100/900) • Bluetooth v2.0 + EDR• Wi-Fi (802.11 b/g) • USB v2.0 HS compatible• 5M CMOS (AF, Power LED) + CIF

- Face Detection, Smile Detection, Eye Blink Detection, Panorama Shot, Mosaic Shot• FM Radio Receiver • A-GPS, stand alone • DivX Codec• Accelerometer / proximity / ambient light sensor• Instant Messaging capability• Featured applications provide alarms, calendar, calculator, record audio, converter, timer, stopwatch,

and world time.• File viewer• Multimedia Message Service (MMS)• Multimedia capability (with included Media player)• Speakerphone capability• WEB/WAP browser (HTMS, xHTML, WML)• Movinand 16GB +microSD card• 3.5" AMOLED


4. Array course control

4-1


4-1. Software Adjustments

Test Jig (GH99-36900A)

RF Test Cable (GH39-00985A) Adapter (GH99-38251A)

Test Cable (GH39-01290A)


Array course control

4-2


4-2. Software Download

4-2-1. Download S/W & USB Driver▶ Downloader Program- LComm3Multi_[version].exe (ex. LComm3Multi_090828.exe)

▶ USB Driver- PDA and Phone : SAMSUNG Mobile USB DRIVER(4.40.7.0) v1.6

▶ GT-i8320 (Protector) Target Device

4-2-2. Driver Installation (PDA and Phone)▶ Make sure that you have installed SAMSUNG Mobile USB Driver in the host PC. If any SAMSUNGMobile USB Driver is already installed, the GT-i8320 S/W binary image can be downloaded to the targetdevice, using the provided USB downloader. But if any error is encountered in installing the SAMSUNGMobile USB Driver, you should uninstall the SAMSUNG Mobile USB Driver, re-start the host PC, and finally install again the SAMSUNG Mobile USB Driver.

4-2-3. Execute the Downloader Program [LComm3Multi_[version].exe]



4-3


4-2-4. Turn off the device. And then, press the Volume Down key, the Camera key andthe PWR key simultaneously to turn on your device in download mode. (PWR keyshould be pressed slightly later than the other keys)

4-2-5. Connect your device to the host PC by using Micro USB DATA Link Cable.

▶ if the device is connected to the host PC successfully, the detected port name, e.g. “COM24”, shouldappear as in the above screenshot.

4-2-6. DownloadA. Binaries

(1) PDA Base Binary: Base binary to operate the device including PDA bootloader, kernel, platform, application, and all programs for PDA.

(2) PDA CSC Binary: CSC binary including all regional settings for every country.(3) Phone Binary: Phone modem binary.

B. Binary Download sequence.- The PDA Base binary and the Phone binary can be downloaded simultaneously or separately. ThePDA CSC binary and the Phone binary can also be downloaded at the same time.

- The order in which the PDA Base binary and the Phone binary are downloaded makes no difference to the target device. The device should be able to operate regardless of the download order of the binaries.

- However, the PDA CSC binary should be downloaded after the PDA Base binary is downloaded. Otherwise, the regional settings accompanied by the PDA CSC binary have no impact on the targe



4-4


t device.

C. Open Binary File

① Open the PDA Base Binary.

② Open the Phone Binary.

③ Open the PDA CSC Binary.

※ It is possible to download each binary one-by-one.D. Download Options

▶ PDA Option- Boot Update: Update the Bootloader. It should be enable when the PDA Base binary is downloaded.- Boot Format: Format the partition of the target’s disk. When there is an explicit notice in the ReleaseNote, Boot Format option should be enabled. If you don’t have any notice for the PDA Base Binary,you have to disable Boot Format in PDA Option.

- CSA Clear: Option for a developer. It should be disabled.- Auto Reboot: Automatically reboot the target after download. It should be enabled for stability.- Auto Download: When the target connects to the host PC by micro-USB after the Start button is clicked, automatically download the binary. It should be enabled.



4-5


▶ Region Select- Chose the country. It is used when the PDA CSC binary is downloaded.

▶ Phone Option- Boot Update: Update the Modem Bootloader. When there is an explicit notice in the Release Note on Phone Boot Update, Boot Update on Phone Option should be enabled. If you don’t have any notice for the Phone Binary, you have to disable Boot Update in Phone Option.

▶ Movinand- Movinand ALL: Option for a developer. It should be enabled.

E. Option setting according to the Binaries.▶ Below table shows the options that should be selected according to the binaries.

　Download Binary

PDA OptionPhoneOption

Movinand

BootUpdate

BootFormat

CSAClear

AutoReboot

AutoDownload

RegionSelect

BootUpdate

MovinandALL

PDA only Enable Disable(2) Disable Enable Enable Don’t Care Disable Enable

Phone only Disable Disable Disable Enable Enable Don’t Care Disable(1) Enable

CSC only Disable Disable Disable Enable Enable Select Disable Enable

PDA, Phone Enable Disable(2) Disable Enable Enable Don’t Care Disable(1) Enable

PDA, CSC Enable Disable(2) Disable Enable Enable Select Disable Enable

Phone, CSC Disable Disable Disable Enable Enable Select Disable(1) EnablePDA, Phone,

CSCEnable Disable(2) Disable Enable Enable Select Disable(1) Enable

(1), (2) When there is an explicit notice in the Release Note, those options should be enabled. Be careful of setting download options. Wrong download setting can damage the device.

F. Download examples▶ Only the PDA Base Binary is downloaded. Or the PDA Base Binary and the Phone Binary are downloaded.



4-6


▶ Only the Phone binary is downloaded.

▶ Only the PDA CSC Binary is downloaded. Or the Phone Binary and the PDA CSC Binary are downloaded.

- Chose the country.

- If you want to change regional setting, only the PDA CSC Binary download is required without thePDA Base Binary and Phone Binary download.



4-7


▶ The PDA Base Binary, the PDA CSC Binary, and the Phone Binary are downloaded. Or the PDA Base Binary and the PDA CSC Binary are downloaded.



4-8


G. Click on the START Button on the downloader program.▶ If the Boot Format option is enabled, the downloader formats the partitions. While the downloader shows “FORMAT!!” message like above, be careful NOT to turn off the device during the period! Iffor any reason the device gets turned off while “FORMAT!!” message shows, the device may getdamaged.

▶ PDA Base Binary download (Screenshot #1: OneNAND download in progress)



4-9


▶ PDA Base Binary download (Screenshot #2: MoviNAND download in progress)

▶ Phone Binary download. While the downloader shows “Phone Update” message like above, be careful NOT to turn off the device during the period! If for any reason the device gets turned offwhile “Phone Update” message shows, the device’s modem may get damaged.

▶ PDA CSC Binary download

▶ Download complete.

4-2-7. Downloading binaries to multiple devices-. Connect multiple devices using USB hub follow the steps 4-2-4, 4-2-5-. Maximum of 8 devices can be connected and binaries can be downloaded simultaneously



4-10


4-3. Trouble Shooting

4-3-1. “Port Open Failed” message or application hang



4-11


F After you install “SAMSUNG Mobile USB Driver”, you may see the message “Port open failed…”or the USB Downloader program hang while downloading a binary. If so, terminate the Downloader program and retry the download.

F If USB port is changed, you may also see the message “Port open failed…” or the USB Downloader program hang. If so, terminate the Downloader program and retry the download.

F If USB cable to the target device is not connected tightly, you may see the message “Port open failed…” or the USB Downloader hang. If so, terminate the Downloader program and then retrythe download.

F If you always see “port open failed” message or the USB Downloader program hang,1. Uninstall the “SAMSUNG Mobile USB DRIVER”2. Restart your PC.3. Install the “SAMSUNG Mobile USB DRIVER”.4. Try the download again.

4-3-2. “Write Failed” message

F If battery level is low, use charged battery and try again.

4-3-3. Downloading doesn’t start

F If the USB port is not detected &downloading doesn’t start and displays the following screen, retry again and when the device is started, keep the PWR key pressed until the USB port is detected & downloading begins.


10. Reference data

10-1


Reference Abbreviate

― AAC: Advanced Audio Coding.

― AVC : Advanced Video Coding.

― BER : Bit Error Rate

― BPSK: Binary Phase Shift Keying

― CA : Conditional Access

― CDM : Code Division Multiplexing

― C/I : Carrier to Interference

― DMB : Digital Multimedia Broadcasting

― EN : European Standard

― ES : Elementary Stream

― ETSI: European Telecommunications Standards Institute

― MPEG: Moving Picture Experts Group

― PN : Pseudo-random Noise

― PS : Pilot Symbol

― QPSK: Quadrature Phase Shift Keying

― RS : Reed-Solomon

― SI : Service Information

― TDM : Time Division Multiplexing

― TS : Transport Stream


1. Safety Precautions

1-1


1-1. Repair Precaution

― Repair in Shield Box, during detailed tuning. Take specially care of tuning or test, becausespecipicty of cellular phone is sensitive for surrounding interference(RF noise).

― Be careful to use a kind of magnetic object or tool, because performance of parts is damaged bythe influence of magnetic force.

― Surely use a standard screwdriver when you disassemble this product, otherwise screw will beworn away.

― Use a thicken twisted wire when you measure level.A thicken twisted wire has low resistance, therefore error of measurement is few.

― Repair after separate Test Pack and Set because for short danger (for example an overcurrentand furious flames of parts etc) when you repair board in condition of connecting Test Pack andtuning on.

― Take specially care of soldering, because Land of PCB is small and weak in heat.

― Surely tune on/off while using AC power plug, because a repair of battery charger is dangerouswhen tuning ON/OFF PBA and Connector after disassembling charger.

― Don't use as you pleases after change other material than replacement registered on SEC System.Otherwise engineer in charge isn't charged with problem that you don't keep this rules.


Safety Precautions

1-2


1-2. ESD(Electrostatically Sensitive Devices) Precaution

Several semiconductor may be damaged easily by static electricity. Such parts are called by ESD(Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below.You can prevent from ESD damage by static electricity.

― Remove static electricity remained your body before you touch semiconductor or parts withsemiconductor. There are ways that you touch an earthed place or wear static electricity preventionstring on wrist.

― Use earthed soldering steel when you connect or disconnect ESD.

― Use soldering removing tool to break static electricity. , otherwise ESD will be damaged by staticelectricity.

― Don't unpack until you set up ESD on product. Because most of ESD are packed by box andaluminum plate to have conductive power,they are prevented from static electricity.

― You must maintain electric contact between ESD and place due to be set up until ESD isconnected completely to the proper place or a circuit board.

I8320 Flash Tutorial English

Documents

Transcript of I8320 Flash Tutorial English