Use for yourself, or resell for profit Resell rights included!
i3.5 scanner Powered by Numeq - Atlas Resell …i3.5 Evolution Scanner Highlights The i3.5 Evolution...
2
i3.5 Evolution Scanner Highlights The i3.5 Evolution - ‘Open’ frame, ‘Open’ output- is a 3D dental scanner based on proven technologies of laser triangulation and precise linear motion systems. Visibility of all areas of dental elements is ensured through a 3-axis motion system combined with 2 vision modules each possessing a different perspective. The higher vision module allows for excellent visibility of negatives such as inlays and onlays while the lower module allows for optimal vision of the margin line. i3.5 Characteristics i3.5 scanner www.cynoprod.com Robust ‘Open’ frame • construction. High productivity - scan and • process a single die in less than 20 seconds through open-frame design Removable magnetic model • holder High and consistent levels of • accuracy < 20 µm Scans single die, single die • batches, multi-element bridges, stumps, complete arches and antagonists. Impervious to ambient light, • Capable of scanning a wide range of colors- preferably though light shades. Scan for wax up function gingival • scan and full arch scan for removable prostheses. Superior mechanical stability • Laptop compatible (no adapter • card required on most models) “Open” STL output, Generating • up to 250,000 points for a single die. 2 new-generation CMOS • cameras / 3 class II lasers Interface: USB 2.0 • Runs on standard Windows • based PC Weight: 18Kg • Footprint width: 16 inches • Height: 21 inches • Operating voltage: 110V – 220V • Scanable volume • 90mm x 100mm x 40mm Number of triangles generated: • varies from 100 000 to 500 000. full model scan Powered by Numeq
Transcript of i3.5 scanner Powered by Numeq - Atlas Resell …i3.5 Evolution Scanner Highlights The i3.5 Evolution...
i3.5 Evolution Scanner Highlights
The i3.5 Evolution - ‘Open’ frame, ‘Open’ output- is a 3D dental scanner based on proven technologies of laser triangulation and precise linear motion systems. Visibility of all areas of dental elements is ensured through a 3-axis motion system combined with 2 vision modules each possessing a different perspective. The higher vision module allows for excellent visibility of negatives such as inlays and onlays while the lower module allows for optimal vision of the margin line. i3.5 Characteristics
i3.5 scanner
www.cynoprod.com
Robust ‘Open’ frame •construction.High productivity - scan and •process a single die in less than 20 seconds through open-frame designRemovable magnetic model •holder High and consistent levels of •accuracy < 20 µmScans single die, single die •batches, multi-element bridges, stumps, complete arches and antagonists. Impervious to ambient light, •Capable of scanning a wide range of colors- preferably though light shades.Scan for wax up function gingival •scan and full arch scan for removable prostheses.
Superior mechanical stability•Laptop compatible (no adapter •card required on most models) “Open” STL output, Generating •up to 250,000 points for a single die.2 new-generation CMOS •cameras / 3 class II lasersInterface: USB 2.0•Runs on standard Windows •based PCWeight: 18Kg•Footprint width: 16 inches•Height: 21 inches•Operating voltage: 110V – 220V•Scanable volume •90mm x 100mm x 40mm Number of triangles generated: •varies from 100 000 to 500 000.
full model scan
Powered by Numeq
Cynoprod InternationalLevel 41, Emirates Towers, Sheikh Zayed Road P.O.Box 31303, Dubai, UAE Tel: +971 4 313 2056 Email: [email protected]
Software NEO® CAD 7.7
NEO CAD Design 7.7 Highlights From simple coping frameworks to high definitionfullcontourcrowns,theNeoCAD7.7 will meet all your digital manufacturing requirements.
Configuredforthecreationofsimpleor•anatomical copings and bridge frameworks for both zirconia and metal.Quick Mode automatic coping and bridge •framework creation with only a few “clicks”.GMS management system for complete •logistical case management and database administration.Microsoft SQL Server enabled for high volume •labs with multiple CAD stations and scanners. Add new lab feature allows users to deal •with multiple labs.Simple“open”ImportandExportofSTLfiles•for both in-house and outsourcing productionFTPExport:CADfiletransferringabilityto•external centersAll features plus full contour crown •capabilities for ceramic, zirconia and metal prosthesis production.High resolution crown library for fast and •simple full contour crown design.Complete PFM design capabilities including •full contoured crowns, reduced crowns, anatomical and simple copingsInlay/ onlay and waxup options.•Other PFM features including; metal band, •metal island and metal occlusionFull contour pressed ceramic crown •capabilitywithsplitSTLfilesforsimultaneouscrown and coping design.Single and multiple insertion axis capabilities •for short and long span bridges.Precise occlusion management with virtual •articulatorAccounting options integrated within the •GMS Accurate automatic margin line detection•Add handles on the substructure allow the •user to make adjustments directly on the substructure without using the blue tooth
“Open“ STLinput
“Open“ STLoutput
Powered by Evirsa
